The first QMP PHY is an USB3/DP combo phy, switch to the newly
documented bindings and register the clocks to the GCC
and DISPCC controllers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #SM8350-HDK
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206-topic-sm8450-upstream-dp-controller-v6-2-d78313cbc41d@linaro.org
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217155838.848403-3-krzysztof.kozlowski@linaro.org
Bindings expect DBVDD-supply and LDO1-IN-supply:
sc7280-herobrine-evoker-lte.dtb: codec@1a: 'DBVDD-supply' is a required property
sc7280-herobrine-evoker-lte.dtb: codec@1a: 'LDO1-IN-supply' is a required property
In sc7180-trogdor.dtsi they come from the same regulator, so let's
assume intention was the same here.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217155838.848403-2-krzysztof.kozlowski@linaro.org
It seems that the RT5682S codec does not use VBAT-supply:
sc7180-trogdor-pazquel360-lte.dtb: codec@1a: Unevaluated properties are not allowed ('VBAT-supply' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217155838.848403-1-krzysztof.kozlowski@linaro.org
The s11b, s12b, s1c and bob supplies are used by several pmic
regulators. Add the missing description to the devicetree.
Note that there are still some consumers that are not (fully) described
in the devicetree so the supplies must remain marked as always-on for
now.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-6-johan+linaro@kernel.org
Downstream DTS uses 16 mA drive strength for the WCD9385 audio codec
RESET_N reset pin. It also pulls the pin down in shutdown mode, thus it
is more like a shutdown pin, not a reset. Use the same settings here
for HDK8450 and keep the WCD9385 by default in powered off (so pin as
low). Align the name of pin configuration node with other pins in the
DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308183317.559253-2-krzysztof.kozlowski@linaro.org
The HDK8450 uses WCD9385 audio codec, so use precise compatible, even
though WCD9380 and WCD9385 are both compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308183317.559253-1-krzysztof.kozlowski@linaro.org
Downstream DTS (and sc8280xp-lenovo-thinkpad-x13s with the same
speakers) uses 16 mA drive strength for the WSA8835 speaker SD_N
reset/shutdown pin. Use the same for HDK8450, as it is seem the
recommended value.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308142712.277659-1-krzysztof.kozlowski@linaro.org
Enable the Hall effect sensor (flip cover) for OnePlus 6/6T.
The GPIO is mapped to SW_LID events as in msm8916, msm8994,
msm8998 devices.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306174147.185239-1-soyer@irl.hu
Bindings expect thermal node names to end with '-thermal', so fix pm660
and pm660l:
sda660-inforce-ifc6560.dtb: thermal-zones: 'pm660', 'pm660l' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230305154308.241651-1-krzysztof.kozlowski@linaro.org
The "dr_mode" is a property of USB DWC3 node, not the Qualcomm wrapper
one:
sm8350-microsoft-surface-duo2.dtb: usb@a6f8800: 'dr_mode' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+'
Fixes: c16160cfa5 ("arm64: dts: qcom: add minimal DTS for Microsoft Surface Duo 2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304130315.51595-2-krzysztof.kozlowski@linaro.org
Fix typo in USB DWC3 node maximum speed property.
Fixes: a41b617530 ("arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304130315.51595-1-krzysztof.kozlowski@linaro.org
Enable the high-speed UART port connected to the Bluetooth controller on
the sa8775p-adp development board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-10-brgl@bgdev.pl
Enable the high-speed UART port connected to the GNSS controller on the
sa8775p-adp development board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-9-brgl@bgdev.pl
Add two UART nodes that are known to be used by existing development
boards with this SoC.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-8-brgl@bgdev.pl
Enable the SPI interface exposed on the sa8775p-ride development board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-7-brgl@bgdev.pl
Add the SPI controller node for the interface exposed on the sa8775p-ride
development board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-6-brgl@bgdev.pl
This enables the I2C interface on the sa8775p-ride development board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-5-brgl@bgdev.pl
Add a disabled node for the I2C interface that's exposed on the
sa8775p-ride development board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-4-brgl@bgdev.pl
Enable the second instance of the QUPv3 engine on the sa8775p-ride board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-3-brgl@bgdev.pl
Add the second instance of the QUPv3 engine to the sa8775p.dtsi.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-2-brgl@bgdev.pl
Add the pmic glink node linked with the DWC3 USB controller
switched to OTG mode and tagged with usb-role-switch.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-9-552f3b721f9e@linaro.org
Normally the 'pinctrl' properties of a SDHC controller and the
chip detect pin settings are dependent on the type of the slots
(for e.g uSD card slot), regulators and GPIO(s) available on the
board(s).
So, move the same from the sm6115 dtsi file to the respective
board file(s).
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314074001.1873781-1-bhupesh.sharma@linaro.org
Normally the 'maximum-speed' and 'dr_mode' properties
of a USB controller + port is dependent on the type of
the ports, regulators and mode change interrupt routing
available on the board(s).
So, move the same from the sm6115 dtsi file to respective
board file(s).
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314083633.1882214-3-bhupesh.sharma@linaro.org
There is only one USB controller present on SM6115 / SM4250
Qualcomm SoC, so drop the numbering used with USB node's label
names in the dtsi and the related sm4250-oneplus-billie2.dts.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314083633.1882214-2-bhupesh.sharma@linaro.org
Fix the external display controller nodes which erroneously described
the controllers as belonging to CX rather than MMCX.
Fixes: 19d3bb9075 ("arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230316141252.2436-1-johan+linaro@kernel.org
The reg address of the tsens_mode nvmem cell is correct but the unit
address does not match (0xec vs 0xef). Fix it. No functional change.
Fixes: 24aafd041f ("arm64: dts: qcom: msm8916: specify per-sensor calibration cells")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308123617.101211-1-stephan.gerhold@kernkonzept.com
The node is incomplete and doesn't need a subnode, add the missing
properties and move everything to the root of qup-spi0-cs-state node.
Fixes: ffc50b2d38 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-topic-sm8550-upstream-dt-fixups-v1-2-595b02067672@linaro.org
gpio-keys,wakeup is a deprecated property:
sm8250-xiaomi-elish.dtb: gpio-keys: key-vol-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-8-krzysztof.kozlowski@linaro.org
gpio-keys,wakeup is a deprecated property:
sm8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-7-krzysztof.kozlowski@linaro.org
gpio-keys,wakeup is a deprecated property:
sm6115p-lenovo-j606f.dtb: gpio-keys: key-volume-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-6-krzysztof.kozlowski@linaro.org
gpio-keys,wakeup is a deprecated property:
sdm630-sony-xperia-nile-voyager.dtb: gpio-keys: key-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-5-krzysztof.kozlowski@linaro.org
