Document the bindings for the sound card on Fairphone 4 which uses the
older non-audioreach audio architecture.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250723-fp4-usb-audio-offload-v3-2-6be84ed4fc39@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix interaction with commit daec29dcc8 ("locking/mutex: Mark
devm_mutex_init() as __must_check"), add return value check. There is no
need for additional complex error handling here, failure to init the
mutex means the code can't progress, so the failure just needs to be passed
up to the caller.
Fixes: b126394d9e ("ASoC: SDCA: Generic interrupt support")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250722102754.2514351-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removed the code where num_sources should be the same as cn_list.
For better resilience, it would be preferable to explicitly add the route
mapping the input pins to this MU entity.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250721112346.388542-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
First, a couple of minor code fixups to already submitted code. Then
some patches to add new DAI ops helpers for the SDCA stuff, these allow
configuring things like the sample rate and finding out which SoundWire
port should be used for a specific SDCA streaming input/output terminal.
Still a few bits of outstanding work here (propogation of Cluster
information particularly) but his should be good enough to get some
basic use-cases working.
Hopefully we are getting fairly close to completing a first version of
the SDCA work now. Should be one more series to add FDL (firmware
downloading), then we should be able to send a first version of the
actual SDCA class driver itself.
Added match table entry on ptl machines to support HDMI-In capture
with rt5682 I2S audio codec. also added the respective quirk
configuration in rt5682 machine driver.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250716082300.1810352-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rstn_gpio being a GPIO descriptor the check is wrong (inverted) for
releasing the reset of the codec.
Fixes: 790d5f8ee6 ("ASoC: codec: tlv320aic32x4: Convert to GPIO descriptors")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250716065708.4041153-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Device variants use different amount of clock inputs, but all of them
are in the same order, 'clock-names' in top-level properties can define
the list and each if:then: block can only narrow the number of items.
This is preferred syntax, because it keeps list unified among devices
and encourages adding new entries to the end of the list, instead of
adding them in the middle. The change has no functional impact, but
partially reverts approach implemented in commit cfad817095 ("ASoC:
dt-bindings: qcom,lpass-va-macro: Add missing NPL clock").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250716074957.102402-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Some small SDCA bug fixes reported from various sources. An array bounds
check, an uninitialised variable and some memory allocations that should
zero initialise.
Charles Keepax (3):
ASoC: SDCA: Fix off by one error in IRQ bound check
ASoC: SDCA: Avoid use of uninitialised local name variable
ASoC: SDCA: Update memory allocations to zero initialise
sound/soc/sdca/sdca_asoc.c | 12 ++++++------
sound/soc/sdca/sdca_interrupts.c | 5 ++---
2 files changed, 8 insertions(+), 9 deletions(-)
--
2.39.5
Merge series from Brian Masney <bmasney@redhat.com>:
The round_rate() clk ops is deprecated in the clk framework in favor
of the determine_rate() clk ops, so let's go ahead and convert the
drivers in the rtc subsystem using the Coccinelle semantic patch
posted below. I did a few minor cosmetic cleanups of the code in a
few cases.
Coccinelle semantic patch:
virtual patch
// Look up the current name of the round_rate function
@ has_round_rate @
identifier round_rate_name =~ ".*_round_rate";
identifier hw_param, rate_param, parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
...
}
// Rename the route_rate function name to determine_rate()
@ script:python generate_name depends on has_round_rate @
round_rate_name << has_round_rate.round_rate_name;
new_name;
@@
coccinelle.new_name = round_rate_name.replace("_round_rate", "_determine_rate")
// Change rate to req->rate; also change occurrences of 'return XXX'.
@ chg_rate depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
identifier ERR =~ "E.*";
expression E;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
(
-return -ERR;
+return -ERR;
|
- return rate_param;
+ return 0;
|
- return E;
+ req->rate = E;
+
+ return 0;
|
- rate_param
+ req->rate
)
...>
}
// Coccinelle only transforms the first occurrence of the rate parameter
// Run a second time. FIXME: Is there a better way to do this?
@ chg_rate2 depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
- rate_param
+ req->rate
...>
}
// Change parent_rate to req->best_parent_rate
@ chg_parent_rate depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
(
- *parent_rate_param
+ req->best_parent_rate
|
- parent_rate_param
+ &req->best_parent_rate
)
...>
}
// Convert the function definition from round_rate() to determine_rate()
@ func_definition depends on chg_rate @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
identifier generate_name.new_name;
@@
- long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
- unsigned long *parent_rate_param)
+ int new_name(struct clk_hw *hw, struct clk_rate_request *req)
{
...
}
// Update the ops from round_rate() to determine_rate()
@ ops depends on func_definition @
identifier has_round_rate.round_rate_name;
identifier generate_name.new_name;
@@
{
...,
- .round_rate = round_rate_name,
+ .determine_rate = new_name,
...,
}
Note that I used coccinelle 1.2 instead of 1.3 since the newer version
adds unnecessary braces as described in this post.
https://lore.kernel.org/cocci/67642477-5f3e-4b2a-914d-579a54f48cbd@intel.com/
Add a helper function that can be called from hw_params() in the DAI ops
to configure the SDCA Cluster, Clock and Usage controls. These setup the
channels, sample rate, and bit depths that will be used by the Terminal.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to extract the SoundWire hardware port number
from the SDCA DataPort Selector Control. Typically this would be
called from hw_params() and used to call sdw_stream_add_slave().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the core SDCA code simply creates a place holder available
channels from 1 to SDCA_MAX_CHANNEL_COUNT. Add a helper function
that will constrain the number of channels based on the actual
available SDCA Clusters in DisCo. Currently this code only handles
Input Terminal Entities as they directly specify the Cluster. More
work will be required later for Output Terminals which inherit their
Cluster. Typically this new helper would be called from the DAIs
startup callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a private data pointer that can be used to store context along
with the DAI. This will be useful to allow the SDCA class library to
store data separately from the CODEC driver itself.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC code for SDCA contains several helper functions that search for
controls/ranges/etc. As the code evolves these helpers are likely to be
useful to anything interacting with the stored DisCo data. Move the
helpers into sdca_function.c and export them so other modules can also
use them.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An input pin list is not generally required, so a warning on the
absence of one is a little extreme, remove this warning message.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current SDCA Control parsing only checks the deferrable flag for
Read/Write and Dual Ranked controls. However, reads can defer as well as
writes so Read Only controls should also check for the deferrable flag.
Add the handling for this into find_sdca_entity_control().
Fixes: 42b144cb6a ("ASoC: SDCA: Add SDCA Control parsing")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All the memory allocations in the SDCA ASoC helpers rely on fields being
zero initialised, the code should use kzalloc not kmalloc.
Reported-by: Shuming Fan <shumingf@realtek.com>
Fixes: 2c8b3a8e6a ("ASoC: SDCA: Create DAPM widgets and routes from DisCo")
Fixes: c3ca24e3fc ("ASoC: SDCA: Create ALSA controls from DisCo")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250715151723.2964336-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-6-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-5-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-4-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-3-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-2-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-1-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peng Fan <peng.fan@nxp.com>:
This patchset is a pick up of patch 1,2 from [1]. And I also collect
Linus's R-b for patch 2. After this patchset, there is only one user of
of_gpio.h left in sound driver(pxa2xx-ac97).
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
Patch 1 is to drop legacy platform data which in-tree no users are using it
Patch 2 is to convert to GPIO descriptors
Checking the DTS that use the device, all are using GPIOD_ACTIVE_LOW
polarity for reset-gpios, so all should work as expected with this patch.
[1] https://lore.kernel.org/all/20250408-asoc-gpio-v1-0-c0db9d3fd6e9@nxp.com/
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Tidy up a bunch of makefile and Kconfig things, and pull the HID and IRQ
into the main SDCA module.
Changes since v1:
- Don't expose SND_SOC_SDCA to the user
- Simplify the makefile bits for HID and IRQ
Thanks,
Charles
Charles Keepax (2):
ASoC: SDCA: Kconfig/Makefile fixups
ASoC: SDCA: Pull HID and IRQ into the primary SDCA module
sound/soc/sdca/Kconfig | 13 +++++++++----
sound/soc/sdca/Makefile | 12 ++++--------
sound/soc/sdca/sdca_functions.c | 1 -
sound/soc/sdca/sdca_hid.c | 2 +-
sound/soc/sdca/sdca_interrupts.c | 8 ++++----
5 files changed, 18 insertions(+), 18 deletions(-)
--
2.39.5
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
ASoC has 2 functions to set bias level.
(A) snd_soc_dapm_force_bias_level()
(B) snd_soc_dapm_set_bias_level()
(A) sets dapm->bias_level, but (B) is not.
I think we should set it on both (A) and (B).
I think it is miss or bug, but Samsung is the only vendor that feels a
problem about this.
I think this patch (= [1/5]) is correct approach, but some non-samsung
vendor might get affect from this patch-set, so I added [RFC] on this
patch-set.
Furthermore, (B) cares both Card and Component, (A) cares Component only.
I guess it is the reason why it is called as "force" bias_level function.
(A) is used from each drivers, (B) is used from soc-dapm only.
I'm not 100% sure though, except special cases, each driver should use (B),
I guess ?
The sysclk frequency can be calculated from sample rate multiply ratio.
When sysclk_freq is not configured, but sysclk_ratio is configured, then
calculate sysclk frequency according to sysclk_ratio.
Apply this change for wm8524 codec.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250708085318.2563521-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use devm_gpiod_get_optional to get GPIO descriptor, and set consumer
name.
- Use gpiod_set_value to configure output value.
While at here, reorder the included headers.
Checking the DTS that use the device, all are using GPIOD_ACTIVE_LOW
polarity for reset-gpios, so all should work as expected with this patch.
Cc: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250710-asoc-gpio-1-v2-3-2233b272a1a6@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sort headers alphabetically to easily insert new ones
and drop unused ones.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20250710-asoc-gpio-1-v2-2-2233b272a1a6@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no machine is using aic32x4_pdata as platform_data, so
remove the dead code.
Cc: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250710-asoc-gpio-1-v2-1-2233b272a1a6@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_set_bias_level() (A) will set dapm->bias_level (a) inside.
No need to set it by each callback function. Remove it.
(A) static int snd_soc_dapm_set_bias_level(...)
{
...
/* success */
if (ret == 0)
(a) snd_soc_dapm_init_bias_level(dapm, level);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldov4g3c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_set_bias_level() (A) will set dapm->bias_level (a) inside.
No need to set it by each callback function. Remove it.
(A) static int snd_soc_dapm_set_bias_level(...)
{
...
/* success */
if (ret == 0)
(a) snd_soc_dapm_init_bias_level(dapm, level);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ms9b4g3j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_set_bias_level() (A) will set dapm->bias_level (a) inside.
No need to set it by each callback function. Remove it.
(A) static int snd_soc_dapm_set_bias_level(...)
{
...
/* success */
if (ret == 0)
(a) snd_soc_dapm_init_bias_level(dapm, level);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6tr4g3r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_set_bias_level() (A) will set dapm->bias_level (a) inside.
No need to set it by each callback function. Remove it.
(A) static int snd_soc_dapm_set_bias_level(...)
{
...
/* success */
if (ret == 0)
(a) snd_soc_dapm_init_bias_level(dapm, level);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ple74g47.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC has 2 functions to set bias level.
(A) snd_soc_dapm_force_bias_level()
(B) snd_soc_dapm_set_bias_level()
snd_soc_dapm_force_bias_level() (A) will set dapm->bias_level (a) if
successed.
(A) int snd_soc_dapm_force_bias_level(...)
{
...
if (ret == 0)
(a) dapm->bias_level = level;
...
}
snd_soc_dapm_set_bias_level() (B) is also a function that sets bias_level.
It will call snd_soc_dapm_force_bias_level() (A) inside, but doesn't
set dapm->bias_level by itself. One note is that (A) might not be called.
(B) static int snd_soc_dapm_set_bias_level(...)
{
...
ret = snd_soc_card_set_bias_level(...);
...
if (dapm != &card->dapm)
(A) ret = snd_soc_dapm_force_bias_level(...);
...
ret = snd_soc_card_set_bias_level_post(...);
...
}
dapm->bias_level will be set if (A) was called, but might not be set
if (B) was called, even though it calles set_bias_level() function.
We should set dapm->bias_level if we calls
snd_soc_dapm_set_bias_level() (B), too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87qzyn4g4h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the HID or the IRQ are selected as options they will always require
loading alongside the main SDCA module. Since it will never be possible
to run without them the value of keeping them as separate modules is
fairly limited. Pull them into the main SDCA module to simplify things
still further.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250711100616.296329-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tidy up a few bits of the SDCA Kconfig. Default both HID and IRQ to
enabled, since typically if one wants SDCA all the functionality
will be expected.
Finally, update the IRQ support to match the changes made to the
HID support.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250711100616.296329-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Add a missing property to the Mediatek MT8188 clk binding to
keep binding checks happy
- Avoid an OOB by setting the correct number of parents in
dispmix_csr_clk_dev_data
- Allocate clk_hw structs early in probe to avoid an ordering
issue where clk_parent_data points to an unallocated clk_hw
when the child clk is registered before the parent clk in the
SCMI clk driver
-----BEGIN PGP SIGNATURE-----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=pVS9
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Fixes for a few clk drivers and bindings:
- Add a missing property to the Mediatek MT8188 clk binding to
keep binding checks happy
- Avoid an OOB by setting the correct number of parents in
dispmix_csr_clk_dev_data
- Allocate clk_hw structs early in probe to avoid an ordering
issue where clk_parent_data points to an unallocated clk_hw
when the child clk is registered before the parent clk in the
SCMI clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
clk: scmi: Handle case where child clocks are initialized before their parents
- Allow hugetlb PMD sharing only on 64-bit as it doesn't make a whole lotta
sense on 32-bit
- Add fixes for a misconfigured AMD Zen2 client which wasn't even supposed to
run Linux
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmhziVAACgkQEsHwGGHe
VUoPLRAAqnv0D8pKO/UPUp05bOvKvEvYarK3Va4MV1QrqOgPIvabGbJOzYStU9+Q
4FZ5ZCZbi0eV1sZuNP1Zk7Ryp/bYipR6gLX+jg06VTXXTrjKnUN3ofBLPQf0+fE9
AZDShoSjS+6ifzt6BaUWW3uDMLOzwv50X/xwtLG+Nrprshs7HzfvJq2oFFQX6drQ
kg7Cj9N8WNHl1kp6CVy2DXVRzv4VR9+yxeNfOCPOJiCVEmzRlMulPzQYWWagYidB
+U+IYDJiG2p8YNL9aiCmnrRNpSfA4Podn8ZJVPKDwXSpmuUmfcLPur0c1Tjt97h0
85ovsJs+RqBBzD3ixkbNSpdNLRBFVX7q5mx4n4+1DuR5ygZrBbDyjZce9gwY2YPh
h1c2dnxxxkp9LAnBFJcaWiv8jzScRRbkqwHprBidkCS4plJiGhrD6MC78fMf8kE5
i+dydBefrsYnBwe3ciyCZh/fCvPHk6OmegSdT1+0jlz2YJOGlD1uSPSMeE6YFFvW
64R7MV3BLllBkpRx57zafx8tsdRiH9mZM6naltlcOcQV3JkHZhDJ5aNkfvBJpXw3
RZtHHAG0noCGSMAhl/crQUkZOany2TdkDQn6SQpcM+iY/E0OQSH+/QM4Rw/s+05/
FEtmkC2FqJ00RODhzSqKIwkKSgiwSCokR4pty5OJqBirUqDFNiw=
=d3UC
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Update Kirill's email address
- Allow hugetlb PMD sharing only on 64-bit as it doesn't make a whole
lotta sense on 32-bit
- Add fixes for a misconfigured AMD Zen2 client which wasn't even
supposed to run Linux
* tag 'x86_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Update Kirill Shutemov's email address for TDX
x86/mm: Disable hugetlb page table sharing on 32-bit
x86/CPU/AMD: Disable INVLPGB on Zen2
x86/rdrand: Disable RDSEED on AMD Cyan Skillfish
- Fix a randconfig build failure in armada-370-xp irqchip
-----BEGIN PGP SIGNATURE-----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=znXh
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a case of recursive locking in the MSI code
- Fix a randconfig build failure in armada-370-xp irqchip
* tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Fix build with PCI disabled
PCI/MSI: Prevent recursive locking in pci_msix_write_tph_tag()
about it
-----BEGIN PGP SIGNATURE-----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=vP1/
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Prevent perf_sigtrap() from observing an exiting task and warning
about it
* tag 'perf_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix WARN in perf_sigtrap()
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaHGbTgAKCRDdBJ7gKXxA
jowqAPiCWBFfcFaX20BxVaMU1PjC3Lh9llDXqQwBhBNdcadSAP44SGQ8nrfV+piB
OcNz2AEwBBfS354G0Etlh4k08YoAAw==
=IDDc
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. A whopping 16 are cc:stable and the remainder address
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix"
* tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "sched/numa: add statistics of numa balance task"
mm: fix the inaccurate memory statistics issue for users
mm/damon: fix divide by zero in damon_get_intervals_score()
samples/damon: fix damon sample mtier for start failure
samples/damon: fix damon sample wsse for start failure
samples/damon: fix damon sample prcl for start failure
kasan: remove kasan_find_vm_area() to prevent possible deadlock
scripts: gdb: vfs: support external dentry names
mm/migrate: fix do_pages_stat in compat mode
mm/damon/core: handle damon_call_control as normal under kdmond deactivation
mm/rmap: fix potential out-of-bounds page table access during batched unmap
mm/hugetlb: don't crash when allocating a folio if there are no resv
scripts/gdb: de-reference per-CPU MCE interrupts
scripts/gdb: fix interrupts.py after maple tree conversion
maple_tree: fix mt_destroy_walk() on root leaf node
mm/vmalloc: leave lazy MMU mode on PTE mapping error
scripts/gdb: fix interrupts display after MCP on x86
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
kallsyms: fix build without execinfo
