Set .cmd_size in the SCSI host template such that the SCSI core makes
struct scsi_cmnd and struct ufshcd_lrb adjacent. Convert the cmd->lrbp
and lrbp->cmd memory loads into pointer offset calculations. Remove the
data structure members that became superfluous, namely ufshcd_lrb.cmd
and ufs_hba.lrb. Since ufshcd_lrb.cmd is removed, this pointer cannot be
used anymore to test whether or not a command is a SCSI command.
Introduce a new function for this purpose, namely ufshcd_is_scsi_cmd().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-24-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tell the SCSI core to skip the memset() call that clears driver-private
data because __ufshcd_setup_cmd() performs all necessary initialization.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-23-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of letting the SCSI core allocate hba->nutrs - 1 commands, let
the SCSI core allocate hba->nutrs commands, set the number of reserved
tags to 1 and use the reserved tag for device management commands. This
patch changes the 'reserved slot' from hba->nutrs - 1 into 0 because the
block layer reserves the smallest tags for reserved commands.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-22-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use hba->reserved_slot instead of open-coding it. This patch prepares
for changing the value of hba->reserved_slot.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-21-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Call ufshcd_init_lrb() from inside ufshcd_setup_dev_cmd() instead of
ufshcd_host_memory_configure(). This patch prepares for calling
ufshcd_host_memory_configure() before the information is available that
is required to call ufshcd_setup_dev_cmd().
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-20-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Call ufshcd_add_scsi_host() before any UPIU commands are sent to the UFS
device. This patch prepares for letting ufshcd_add_scsi_host() allocate
memory for both SCSI and UPIU commands.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-19-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for allocating the SCSI host earlier by making the SCSI host
queue depth independent of the queue depth supported by the UFS device.
This patch may increase the queue depth of the UFS SCSI host.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-18-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the MCQ mode and legacy mode loops into a single loop. This patch
prepares for optimizing the hot path by removing the direct hba->lrb[]
accesses from ufshcd_eh_device_reset_handler().
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-17-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace a tag loop with blk_mq_tagset_busy_iter(). This patch prepares
for removing the hba->lrb[] array.
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-16-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pass a SCSI command pointer instead of a struct ufshcd_lrb pointer. This
patch prepares for combining the SCSI command and ufshcd_lrb data
structures into a single data structure.
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-15-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_should_inform_monitor() only returns 'true' for SCSI commands.
Instead of checking inside ufshcd_should_inform_monitor() whether its
second argument represents a SCSI command, only call this function for
SCSI commands. This patch prepares for removing the lrbp->cmd member.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-14-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change the 'task_tag' argument into an LRB pointer. This patch prepares
for the removal of the hba->lrb[] array.
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-13-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change the 'tag' argument into a SCSI command pointer. This patch
prepares for the removal of the hba->lrb[] array.
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-12-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of checking inside ufshcd_add_command_trace() whether 'cmd'
points at a SCSI command, let the caller perform that check. This patch
prepares for removing the lrbp->cmd pointer.
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-11-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change the 'tag' argument into an LRB pointer. This patch prepares for the
removal of the hba->lrb[] array.
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-10-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since 'tag' is only used inside the if-statement, move the 'tag'
assignment into the if-statement. This patch prepares for introducing a
WARN_ON_ONCE() call in ufshcd_mcq_get_tag() if the tag lookup fails.
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-9-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a .queue_reserved_command() implementation and call it from the code
path that aborts SCSI commands. This ensures that the code for
allocating a pseudo SCSI device and also the code for allocating and
processing reserved commands gets triggered while running blktests.
Most of the code in this patch is a modified version of code from John
Garry. See also
https://lore.kernel.org/linux-scsi/75018e17-4dea-4e1b-8c92-7a224a1e13b9@oracle.com/
Reviewed-by: John Garry <john.g.garry@oracle.com>
Suggested-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reserved commands will be used by SCSI LLDs for submitting internal
commands. Since the SCSI host, target and device limits do not apply to
the reserved command use cases, bypass the SCSI host limit checks for
reserved commands. Introduce the .queue_reserved_command() callback for
reserved commands. Additionally, do not activate the SCSI error handler
if a reserved command fails such that reserved commands can be submitted
from inside the SCSI error handler.
[ bvanassche: modified patch title and patch description. Renamed
.reserved_queuecommand() into .queue_reserved_command(). Changed
the second argument of __blk_mq_end_request() from 0 into error
code in the completion path if cmd->result != 0. Rewrote the
scsi_queue_rq() changes. See also
https://lore.kernel.org/linux-scsi/1666693096-180008-5-git-send-email-john.garry@huawei.com/ ]
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20251031204029.2883185-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allocate a pseudo SCSI device if 'nr_reserved_cmds' has been set. Pseudo
SCSI devices have the SCSI ID <max_id>:U64_MAX so they won't clash with
any devices the LLD might create. Pseudo SCSI devices are excluded from
scanning and will not show up in sysfs. Additionally, pseudo SCSI
devices are skipped by shost_for_each_device(). This prevents that the
SCSI error handler tries to submit a reset to a non-existent logical
unit.
Do not allocate a budget map for pseudo SCSI devices since the
cmd_per_lun limit does not apply to pseudo SCSI devices.
Do not perform queue depth ramp up / ramp down for pseudo SCSI devices.
Pseudo SCSI devices will be used to send internal commands to a storage
device.
[ bvanassche: edited patch description / renamed host_sdev into
pseudo_sdev / unexported scsi_get_host_dev() / modified error path in
scsi_get_pseudo_dev() / skip pseudo devices in __scsi_iterate_devices()
and also when calling sdev_init(), sdev_configure() and sdev_destroy().
See also
https://lore.kernel.org/linux-scsi/20211125151048.103910-2-hare@suse.de/ ]
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for not allocating a budget map for pseudo SCSI devices by
checking whether a budget map has been allocated before using it.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move two statements that will be needed for pseudo SCSI devices in front
of code that won't be needed for pseudo SCSI devices. No functionality
has been changed.
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quite some drivers are using management commands internally. These
commands typically use the same tag pool as regular SCSI commands. Tags
for these management commands are set aside before allocating the
block-mq tag bitmap for regular SCSI commands. The block layer already
supports this via the reserved tag mechanism. Add a new field
'nr_reserved_cmds' to the SCSI host template to instruct the block layer
to set aside a tag space for these management commands by using reserved
tags. Exclude reserved commands from .can_queue because .can_queue is
visible in sysfs.
[ bvanassche: modified patch title and patch description. Left out the
following statements: "if (sht->nr_reserved_cmds)" and also
"if (sdev->host->nr_reserved_cmds) flags |= BLK_MQ_REQ_RESERVED;". Moved
nr_reserved_cmds declarations and statements close to the
corresponding can_queue declarations and statements. See also
https://lore.kernel.org/linux-scsi/20210503150333.130310-11-hare@suse.de/ ]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251031204029.2883185-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Both mbox_cmd and mbox_sts have the same size, so using sizeof(mbox_cmd)
when clearing mbox_sts did not cause any functional issue. However, it
is misleading and reduces code readability.
Update the memset() calls to use sizeof(mbox_sts) to make the intent
clear
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251021090354.1804327-1-alok.a.tiwari@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
aac_queuecommand() is a scsi_host_template.queuecommand()
implementation. Any value returned by this function other than one of
the following values is translated into SCSI_MLQUEUE_HOST_BUSY:
* 0
* SCSI_MLQUEUE_HOST_BUSY
* SCSI_MLQUEUE_DEVICE_BUSY
* SCSI_MLQUEUE_EH_RETRY
* SCSI_MLQUEUE_TARGET_BUSY
Improve readability of aac_queuecommand() by returning
SCSI_MLQUEUE_HOST_BUSY instead of FAILED.
Cc: Gilbert Wu <gilbert.wu@microchip.com>
Cc: Sagar Biradar <Sagar.Biradar@microchip.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251021201743.3539900-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver calls asc_prt_scsi_host() -> scsi_host_busy() prior to
calling scsi_add_host(). This should not be done, and has raised issues
for other drivers, like [0].
Function asc_prt_scsi_host() only has a single callsite, as above, where
the shost busy count would always be 0.
Avoid printing the shost busy count to avoid this problem.
[0] https://lore.kernel.org/linux-scsi/20251014200118.3390839-3-bvanassche@acm.org/
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251023085451.3933666-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
I guess that the @shost comment on scsi_host_busy() was copied from
scsi_host_get() (as it is the same), however they do not do the same
thing.
Also drop reference to busy counter, which has been removed.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251023082759.3927000-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
This patch series includes two bug fixes for this development cycle
and six small patches that are intended for the next merge window. If
applying the first two patches only during the current development
cycle would be inconvenient, postponing all patches until the next
merge window is fine with me.
Please consider including these patches in the upstream kernel.
Thanks,
Bart.
[mkp: Applied patches #1 and #2 to 6.18/scsi-fixes]
Link: https://patch.msgid.link/20251014200118.3390839-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simplify ufshcd_mcq_sq_cleanup() by using guard(mutex)() instead of
explicit mutex_lock() and mutex_unlock() calls. No functionality has
been changed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20251014200118.3390839-9-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Return directly instead of jumping to a return statement. No
functionality has been changed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20251014200118.3390839-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_enable_intr() is not exported and hence should not be declared in
include/ufs/ufshcd.h.
Fixes: 2537577979 ("scsi: ufs: core: Change MCQ interrupt enable flow")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20251014200118.3390839-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the UFS_DEV_COMP constant because it is not used.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20251014200118.3390839-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since uic_command::cmd_active is used as a boolean variable, change its
type from 'int' into 'bool'. No functionality has been changed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make it easier to find the sections in the UFSHCI standard where these
constants come from.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Building the qla1280 driver with DEBUG_QLA1280 set will emit compiler
warnings. Fix some print formatting strings to reflect the correct type
of printed variables as well as remove unused code. (static function
ql1280_dump_device) in order to avoid compiler warnings.
[mkp: fixed a few more checkpatch warnings]
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20251002052604.24590-1-linmag7@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Peter Wang <peter.wang@mediatek.com says>:
Improves the UFS Mediatek driver by correcting clock scaling with PM
QoS, and adjusting power management flows. It addresses
shutdown/suspend race conditions, and removes redundant
functions. Support for new platforms is added with the MMIO_OTSD_CTRL
register, and MT6991 performance is optimized with MRTT and random
improvements. These changes collectively enhance driver performance,
stability, and compatibility.
Changes since v1:
1. Remove two patches that will be fixed in UFS core.
- ufs: host: mediatek: Fix runtime suspend error deadlock
- ufs: host: mediatek: Enable interrupts for MCQ mode
2. Use hba->shutting_down instead of ufshcd_is_user_access_allowed
v1:
https://patch.msgid.link/20250918104000.208856-1-peter.wang@mediatek.com
Link: https://patch.msgid.link/20250924094527.2992256-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for the MT6991 platform by enabling MRTT settings and random
performance improvements. These enhancements aim to optimize performance
and efficiency on the MT6991 hardware.
Enable multi-Round Trip Time (MRTT) for improved data handling. Enable
random performance improvement features to boost overall system
responsiveness.
Signed-off-by: Naomi Chu <naomi.chu@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-9-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce support for a new UFS Mediatek platform by adding the
REG_UFS_UFS_MMIO_OTSD_CTRL register. This update includes checks for
legacy platforms and uses the new register to replace debug selection
and handle specific operations. The changes ensure compatibility across
different hardware versions and prevent potential issues with debug
usage on newer platforms.
Additional updates include error logging improvements during link setup
for newer and legacy platforms, ensuring proper event logging and
debugging.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-8-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the duplicate ufs_mtk_us_to_ahit() function in the UFS Mediatek
driver and export the existing ufshcd_us_to_ahit() function for shared
use. This change reduces redundancy and maintains consistency across the
codebase.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-7-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Address a race condition between shutdown and suspend operations in the
UFS Mediatek driver. Before entering suspend, check if a shutdown is in
progress to prevent conflicts and ensure system stability.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-6-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Set the sync length for FASTAUTO G1 mode in the UFS Mediatek
driver. This ensures the sync length meets minimum values for high-speed
gears, improving stability during power mode changes.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-5-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add clock scaling down for power management flow in the UFS Mediatek
driver. If clock scaling is disabled and fixed in high gear, ensure the
clock scales down during suspend and scales up again after resume to
support high gear. This adjustment maintains proper power management.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-4-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Adjust clock scaling during suspend and resume in the UFS Mediatek
driver. Ensure that the clock scales down during suspend if it was
scaled up, and scales up again after resume. This adjustment maintains
proper power management.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-3-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct clock scaling with PM QoS during suspend and resume. Ensure PM
QoS is released during suspend if scaling up and re-applied after
resume. This prevents performance issues and maintains proper power
management.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bao D. Nguyen <quic_nguyenb@quicinc.com> says:
Multiple ufs device manufacturers request support for the
UFS_DEVICE_QUIRK_DELAY_AFTER_LPM quirk in the Qualcomm's platform
driver. After checking further with the major UFS manufacturers
engineering teams such as Samsung, Kioxia, SK Hynix and Micron, all
the manufacturers require this quirk. Since the quirk is needed by all
the ufs device manufacturers, remove the quirk in the ufs core driver
and implement a universal delay for all the ufs devices.
In addition to verifying with the public device's datasheets, the ufs
device manufacturer's engineering teams confirmed the required vcc
power-off time for the devices is a minimum of 1ms before vcc can be
powered on again. The existing 5ms delay implemented in the ufs core
driver seems too conservative, so replace the hard coded 5ms delay
with a variable default to 2ms setting to improve the system resume
latency. The platform drivers can override this setting as needed.
Link: https://patch.msgid.link/cover.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After the UFS device VCC is powered off, all the UFS device
manufacturers require a minimum of 1ms of power-off time before VCC can
be powered on again. This requirement has been verified with all the UFS
device manufacturer's datasheets.
Replace the hard coded 5ms delay with a variable with a default setting
of 2ms to improve the system resume latency. The platform drivers can
override this setting as needed.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/72fa649406a0bf02271575b7d58f22c968aa5d7e.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After the UFS device VCC is turned off, all the UFS device manufacturers
require a period of power-off time before the VCC can be turned on
again. This requirement has been confirmed with all the UFS device
manufacturer's datasheets.
Remove the UFS_DEVICE_QUIRK_DELAY_AFTER_LPM quirk in the UFS core driver
and implement a universal delay that is required by all the UFS device
manufacturers. In addition, remove the support for this quirk in the
platform drivers.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/25f134d5a42e8b8365be64d512d1bb5fc2bce6ff.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhance the ufshcd_print_tr() function to support dumping completion
queue (CQ) entries in MCQ mode when an error occurs. This addition
provides more detailed debugging information by including the CQ entry
data in the error logs, aiding in the diagnosis of issues in MCQ mode.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251016023507.1000664-3-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update the completion queue (CQ) entry format according to the UFS 4.1
specification. UFS 4.1 introduces new members in reserved record
DW5. Also refine DW4 with detailed members defined in UFS 4.0. Modify
the code to incorporate these changes by updating the overall_status in
the CQ entry structure.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251016023507.1000664-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This change allows removing multiple casts and hence improves type
checking by the compiler.
Cc: Hannes Reinecke <hare@suse.de>
Suggested-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251014220426.3690007-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
