Add API dw_hdmi_to_plat_data() to fetch plat_data because audio device
driver needs it to enable(disable)_audio().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-4-shengjiu.wang@nxp.com
The IEC958 subframe format SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE are used
in HDMI and DisplayPort to describe the audio stream, but hardware device
may need to reorder the IEC958 bits for internal transmission, so need
these standard bits definitions for IEC958 subframe format.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-3-shengjiu.wang@nxp.com
Add binding for the i.MX8MP HDMI parallel Audio interface block.
The HDMI TX Parallel Audio Interface (HTX_PAI) is a digital module that
acts as the bridge between the Audio Subsystem to the HDMI TX Controller.
This IP block is found in the HDMI subsystem of the i.MX8MP SoC.
Aud2htx module in Audio Subsystem, HDMI PAI module and HDMI TX
Controller compose the HDMI audio pipeline.
In fsl,imx8mp-hdmi-tx.yaml, add port@2 that is linked to pai_to_hdmi_tx.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-2-shengjiu.wang@nxp.com
The code contains several instances of chained assignments. The Linux
kernel coding style generally favors clarity and simplicity over terse
syntax. Refactor the code to use a separate line for each assignment.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Link: https://lore.kernel.org/r/20250920-improve-ssd130x-v2-5-77721e87ae08@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The ssd130x_connector_get_modes function contains a manual implementation
to manage modes.
This pattern is common for simple displays, and the DRM core already
provides the drm_connector_helper_get_modes_fixed() helper for this exact
use case.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Link: https://lore.kernel.org/r/20250920-improve-ssd130x-v2-4-77721e87ae08@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The ssd130x_crtc_mode_valid() function contains a manual implementation
to validate the display mode against the panel's single fixed resolution.
This pattern is common for simple displays, and the DRM core already
provides the drm_crtc_helper_mode_valid_fixed() helper for this exact
use case.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Link: https://lore.kernel.org/r/20250920-improve-ssd130x-v2-3-77721e87ae08@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
To prevent log spam, convert all instances to the DRM-specific
drm_WARN_ON_ONCE() macro. This ensures that a warning is emitted only
the first time the condition is met for a given device instance, which
is the desired behavior within the graphics subsystem.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Link: https://lore.kernel.org/r/20250920-improve-ssd130x-v2-2-77721e87ae08@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Calls to drm_gem_fb_end_cpu*() should be between the calls to
drm_dev*(), and not hidden inside some other function. This way the
critical section code is visible at a glance, keeping it short and
improving maintainability.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Link: https://lore.kernel.org/r/20250920-improve-ssd130x-v2-1-77721e87ae08@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Split firmware boot parameters (4KB) and FW version (4KB) into dedicated
buffer objects, separating them from the FW runtime memory buffer. This
creates three distinct buffers with independent allocation control.
This enables future modifications, particularly allowing the FW
image memory to be moved into a read-only buffer.
Fix user range starting address from incorrect 0x88000000 (2GB + 128MB)
overlapping global aperture on 37XX to intended 0xa0000000 (2GB + 512MB).
This caused no issues as FW aligned this range to 512MB anyway, but
corrected for consistency.
Convert ivpu_hw_range_init() from inline helper to function with overflow
validation to prevent potential security issues from address range
arithmetic overflows.
Improve readability of ivpu_fw_parse() function, remove unrelated constant
defines and validate firmware header values based on vdev->hw->ranges.
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250925074209.1148924-1-karol.wachowski@linux.intel.com
Currently, pm_runtime_resume_and_get() is invoked in the driver's open
callback, and pm_runtime_put_autosuspend() is called in the close
callback. As a result, the device remains active whenever an application
opens it, even if no I/O is performed, leading to unnecessary power
consumption.
Move the runtime PM calls to the AIE2 callbacks that actually interact
with the hardware. The device will automatically suspend after 5 seconds
of inactivity (no hardware accesses and no pending commands), and it will
be resumed on the next hardware access.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250923152229.1303625-1-lizhi.hou@amd.com
The role of drm_bridge_add/remove() is more complex now after having added
the lingering list. Update the kdoc accordingly.
Also stop mentioning the global list(s) in the first line of the docs: the
most important thing to mention here is that bridges are registered and
deregistered, lists are just the type of container used to implement such
(de)registration.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250915-drm-bridge-debugfs-removed-v9-3-6e5c0aff5de9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The usefulness of /sys/kernel/debug/dri/bridges is limited as it only shows
bridges between drm_bridge_add() and drm_bridge_remove(). However
refcounted bridges can stay allocated and lingering for a long time after
drm_bridge_remove(), and a memory leak due to a missing drm_bridge_put()
would not be visible in this debugfs file.
Add lingering bridges to the /sys/kernel/debug/dri/bridges output.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250915-drm-bridge-debugfs-removed-v9-2-6e5c0aff5de9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Between drm_bridge_add() and drm_bridge_remove() bridges are registered to
the DRM core via the global bridge_list and visible in
/sys/kernel/debug/dri/bridges. However between drm_bridge_remove() and the
last drm_bridge_put() memory is still allocated even though the bridge is
not registered, i.e. not in bridges_list, and also not visible in
debugfs. This prevents debugging refcounted bridges lifetime, especially
leaks due to a missing drm_bridge_put().
In order to allow debugfs to also show the removed bridges, move such
bridges into a new ad-hoc list until they are eventually freed.
Note this requires adding INIT_LIST_HEAD(&bridge->list) in the bridge
initialization code. The lack of such init was not exposing any bug so far,
but it would with the new code, for example when a bridge is allocated and
then freed without calling drm_bridge_add(), which is common on probe
errors.
drm_bridge_add() needs special care for bridges being added after having
been previously added and then removed. This happens for example for many
non-DCS DSI host bridge drivers like samsung-dsim which
drm_bridge_add/remove() themselves every time the DSI device does a DSI
attaches/detach. When the DSI device is hot-pluggable this happens multiple
times in the lifetime of the DSI host bridge. On every attach after the
first one, drm_bridge_add() finds bridge->list in the removed list, not at
the initialized state as drm_bridge_add() currently expects. Add a
list_del_init() to remove the bridge from the lingering list and bring
bridge->list back to the initialized state.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250915-drm-bridge-debugfs-removed-v9-1-6e5c0aff5de9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Add support for DisplayPort to the bridge, which entails the following:
- Get and use an interrupt for HPD;
- Properly clear all status bits in the interrupt handler;
Signed-off-by: John Ripple <john.ripple@keysight.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250915174543.2564994-1-john.ripple@keysight.com
Make sure the headers are sorted alphabetically to ensure consistent
code.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250623-simple-drm-fb-icc-v2-4-f69b86cd3d7d@fairphone.com
Make sure the headers are sorted alphabetically to ensure consistent
code.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Several fbdev drivers select FB_MODE_HELPER in the Kconfig. The
setting controls some helper functions and has no meaning to the
user. Make it an internal option.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250909132047.152612-3-tzimmermann@suse.de
The option CONFIG_FB_TILEBLITTING is controlled by the user. Selecting
it from drivers can lead to cyclic dependencies within the config. In
fbcon, there's special handling for tile blitting, which currently
cannot be disabled without first disabling the relevant fbdev drivers.
Fix the Kconfig dependency to make it work.
Some guidelines for using select can be found in the kernel docs at [1].
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.16/source/Documentation/kbuild/kconfig-language.rst#L147 # [1]
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250909132047.152612-2-tzimmermann@suse.de
The function is unused; remove it.
Instead of relying on a general blit helper, drivers should pick a blit
function by themselves from their list of supported color formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-4-tzimmermann@suse.de
Some configurations of sysfb outputs require format conversion from
framebuffer to scanout buffer. It is a driver bug if the conversion
helper is missing, yet it might happen on odd scanout formats. The old
code, based on drm_fb_blit(), only detects this situation during the
commit's hardware update, which is too late to abort the update.
Lookup the correct blit helper as part of the check phase. Then store
it in the sysfb plane state. Allows for detection of a missing helper
before the commit has started. Also avoids drm_fb_blit()'s large switch
statement on each updated scanline. Only a single lookup has to be done.
The lookup is in drm_sysfb_get_blit_func(), which only tracks formats
supported by sysfb drivers.
The lookup happens in sysfb's begin_fb_access helper instead of its
atomic_check helper. This allows vesadrm, and possibly other drivers,
to implement their own atomic_check without interfering with blit
lookups. Vesadrm implements XRGB8888 on top of R8 formats with the
help of the atomic_check. Doing the blit lookup in begin_fb_access then
always uses the correct CRTC format on all drivers.
v2:
- vesadrm: use drm_sysfb_plane_helper_begin_fb_access()
- fix type in commit description (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-3-tzimmermann@suse.de
The plane-state type struct drm_sysfb_plane_state will store the
helper for blitting to the scanout buffer.
v2:
- add variable for duplicated shadow-plane state (Javier)
- fix build error
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-2-tzimmermann@suse.de
During conversion of WARN_ON_ONCE to drm_WARN_ON_ONCE in
commit 2d2f1dc74c ("drm: gud: replace WARN_ON/WARN_ON_ONCE with
drm versions"), the IS_ERR check was accidentally removed, breaking
the gud_connector_add_properties() function, as any valid pointer
in state_val would produce an error.
The warning was reported by kernel test robot, and is fixed in this patch.
Fixes: 2d2f1dc74c ("drm: gud: replace WARN_ON/WARN_ON_ONCE with drm versions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202509212215.c8v3RKmL-lkp@intel.com/
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250922173836.5608-1-rubenru09@aol.com
Add small helpers (drm_dp_post_lt_adj_req_supported() and
drm_dp_post_lt_adj_req_in_progress()) to help with implementing
the POST_LT_ADJ_REQ sequence.
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250718120154.15492-3-ville.syrjala@linux.intel.com
A rework of the scheduler unit tests removed the done_list. That list is
still mentioned in the mock test header.
Remove that relict.
Fixes: 4576de9b79 ("drm/sched/tests: Implement cancel_job() callback")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250919064450.147176-2-phasta@kernel.org
Commit a017f7b860 ("drm/panfrost: Expose JM context IOCTLs to UM")
added new ioctls to the driver and was meant to bump the version number.
However it actually only added a comment and didn't change the exposed
version number. Bump the number to be consistent with the comment.
Fixes: a017f7b860 ("drm/panfrost: Expose JM context IOCTLs to UM")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://lore.kernel.org/r/20250919080700.3949393-1-steven.price@arm.com
Support for console rotation is somewhat bolted onto the helper
fbcon_set_bitops() for unrotated displays.
Update fbcon_set_bitops() with a switch statement that picks the
correct settings helper for the current rotation. For unrotated
consoles, set the bitops for in the new helper fbcon_set_bitops_ur().
Rename the other, existing helpers to match the common naming
scheme.
The old helper fbcon_set_rotate() is no longer used.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20250909124616.143365-6-tzimmermann@suse.de
Depending on rotation settings, fbcon sets different callback
functions in struct fbcon_par from within fbcon_set_bitops(). Declare
the callback functions in the new type struct fbcon_bitops. Then
only replace the single bitops pointer in struct fbcon_par.
Keeping callbacks in constant instances of struct fbcon_bitops
makes it harder to exploit the callbacks. Also makes the code slightly
easier to maintain.
For tile-based consoles, there's a separate instance of the bitops
structure.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20250909124616.143365-5-tzimmermann@suse.de
The field struct fbcon_par.rotate_font points to fbcon_rotate_font() if
the console is rotated. Set the callback in the same place as the other
callbacks. Prepares for declaring all fbcon callbacks in a dedicated
struct type.
If not rotated, fbcon_set_bitops() still clears the callback to NULL.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20250909124616.143365-4-tzimmermann@suse.de
The type struct fbcon_ops contains fbcon state and callbacks. As the
callbacks will be removed from struct fbcon_ops, rename the data type
to struct fbcon_par. Also rename the variables from ops to par.
The _par postfix ("private access registers") is used throughout the
fbdev subsystem for per-driver state. The fbcon pointer within struct
fb_info is also named fbcon_par. Hence, the new naming fits existing
practice.
v2:
- rename struct fbcon_ops to struct fbcon_par
- fix build for CONFIG_FB_TILEBITTING=n (kernel test robot)
- fix indention
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20250909124616.143365-3-tzimmermann@suse.de
It is unclear why fence errors were set only for CS_INHERIT_FAULT.
Downstream driver also does not treat CS_INHERIT_FAULT specially.
Remove the check.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250828200419.3533393-1-olvaffe@gmail.com
For DebugFS builds, create a filesystem knob that, for every single open
file of the Panfrost DRM device, shows its command name information and
PID (when applicable), and all of its existing JM contexts.
For every context, show the DRM scheduler priority value of all of its
scheduling entities.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250917191859.500279-5-adrian.larumbe@collabora.com
Minor revision of the driver must be bumped because this expands the
uAPI. On top of that, let UM know about the available priorities so that
they can create contexts with legal priority values.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250917191859.500279-4-adrian.larumbe@collabora.com
A JM context describes user-requested priorities for the JM queues.
Context creation leads to the initialization of scheduling entities of
the same priority for all the device's job slots.
Until context creation and destruction are exposed to UM, all issued
jobs shall be bound to the default Panfrost file context, which has
medium priority.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250917191859.500279-3-adrian.larumbe@collabora.com
The new uAPI lets user space query the KM driver for the available
priorities a job can be given at submit time. These are managed through
the notion of a context, for which we also provide new creation and
destruction ioctls.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250917191859.500279-2-adrian.larumbe@collabora.com
Allow user mode drivers to manage preemption buffers, enabling
memory savings by sharing a single buffer across multiple
command queues within the same memory context.
Introduce DRM_IVPU_PARAM_PREEMPT_BUFFER_SIZE to report the required
preemption buffer size as specified by the firmware.
The preemption buffer is now passed from user space as an entry
in the BO list of DRM_IVPU_CMDQ_SUBMIT. The buffer must be
non-mappable and large enough to hold preemption data.
For backward compatibility, the kernel will allocate an internal
preemption buffer if user space does not provide one.
User space can only provide a single preemption buffer,
simplifying the ioctl interface and parameter validation.
A separate secondary preemption buffer is only needed
to save below 4GB address space on 37xx and only if preemption
buffers are not shared.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250915103437.830086-1-karol.wachowski@linux.intel.com
Previously, aborting work could return early after engine reset or resume
failure, skipping the necessary runtime_put cleanup leaving the device
with incorrect reference count breaking runtime power management state.
Replace early returns with goto statements to ensure runtime_put is always
executed.
Fixes: a47e36dc5d ("accel/ivpu: Trigger device recovery on engine reset/resume failure")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250916084809.850073-1-karol.wachowski@linux.intel.com
Remove references to firmware boot parameters that were never used
by any production version of device firmware.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250915103553.830151-1-karol.wachowski@linux.intel.com
Reduce code duplication and improve the overall readability of the debugfs
output for job scheduling priority bands.
Additionally fix clang-tidy warning about missing default case in the
switch statement.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250915103401.830045-1-karol.wachowski@linux.intel.com
Ensure that cmdq->db_id is reset to 0 if ivpu_jsm_register_db fails,
preventing potential reuse of invalid command queue with
unregistered doorbell.
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250915103421.830065-1-karol.wachowski@linux.intel.com
In amdxdna_gem_obj_vmap(), calling dma_buf_vmap() triggers a kernel
warning if LOCKDEP is enabled. So for imported object, use
dma_buf_vmap_unlocked(). Then, use drm_gem_vmap() for other objects.
The similar change applies to vunmap code.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250916174842.234709-1-lizhi.hou@amd.com
Function drm_sched_entity_do_release() has been renamed in
commit 180fc134d7 ("drm/scheduler: Rename cleanup functions v2.").
Refer to the correct function in the documentation.
Signed-off-by: Luc Ma <onion0709@gmail.com>
[phasta: commit message]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250915132327.6293-1-onion0709@gmail.com
Give TTM BOs a separate cleanup function.
No funktional change, but the next step in removing the TTM BO reference
counting and replacing it with the GEM object reference counting.
v2: move the code around a bit to make it clearer what's happening
v3: fix nouveau_bo_fini as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250909144311.1927-1-christian.koenig@amd.com
Documentation/process/deprecated.rst recommends against the use of
kmalloc with dynamic size calculations due to the risk of overflow and
smaller allocation being made than the caller was expecting.
kmalloc_array avoids this issue.
Signed-off-by: James Flowers <bold.zone2373@fastmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250914073841.69582-1-bold.zone2373@fastmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Default config for UML (x86_64) doesn't include any driver which
supports DRM_CLIENT_SELECTION, which makes drm_client_modeset disabled
(and correspondingly tests for that module are not executed too).
Enable DRM_VKMS and DRM_FBDEV_EMULATION in order to be able to run DRM
client modesetting tests.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20250821-drm-client-tests-v1-1-49e7212c744a@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The bridge returned by drm_bridge_get_next_bridge() is refcounted. Put it
when done. We need to ensure it is not put before either next_bridge or
next_bridge_state is in use, thus for simplicity use a cleanup action.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250801-drm-bridge-alloc-getput-drm_bridge_get_next_bridge-v2-9-888912b0be13@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
