Fix a simple indentation issue in the v4l2-subdev.h header.
Fixes: f57fa29592 ("media: v4l2-subdev: Add new ioctl for client capabilities")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use V4L2 CCI for accessing device's registers. The 8-bit compatibility
read option is removed but this is supported by regmap through other
means.
Also the CCS register definitions are re-generated with V4L2 CCI
definitions. The older SMIA++ register definitions have been manually
converted.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Separate CCS static data read-only register access in ccs-reg-access.c by
naming them differently.
The code in this file generally deals with reading and writing registers
where as static data (when it comes to ccs_static_data_read_ro_reg())
contains the read-only register values but no hardware registers are
accessed in that case.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Generate register definitions that are fit for use with V4L2 CCI.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add CCI_REG_WIDTH() macro to obtain register width in bits and similarly,
CCI_REG_WIDTH_BYTES() to obtain it in bytes.
Also add CCI_REG_ADDR() macro to obtain the address of a register.
Use both macros in v4l2-cci.c, too.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Provide a few bits for drivers to store private information on register
definitions.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
linux/bits.h is needed for GENMASK(). Include it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The isc_try_fse() function, called from isc_validate(), takes two
parameters, an isc_device pointer, and a v4l2_subdev_state pointer. The
isc_device is accessed but not modified by the function. The state is
modified, including the struct v4l2_subdev_pad_config array it points
to, but they are then never used by the caller. Furthermore, the V4L2
subdev operation called by isc_try_fse() doesn't modify the subdev it is
called on. The isc_try_fse() function has thus no effect, and can just
be dropped.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com>
Tested-by: Eugen Hristev <eugen.hristev@collabora.com>
[Sakari Ailus: Resolve conflicts due to API changes.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Document that sub-device initialisation needs to complete before the async
sub-device is registered as there is no further driver action needed
before the sensor becomes accessible via the UAPI.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As the sensor may be accessible right after its async sub-device is
registered, enable runtime PM before doing so.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
A number of CCS register value limits are in ireal or float format.
Also convert them to integers for easier interpretation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: d3f863a63f ("media: i2c: Add ov9734 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: 7ee8505468 ("media: Add sensor driver support for the ov13b10 camera.")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
It also sets the runtime PM status to active as the sensor was turned
on by i2c-core.
Fixes: 0827b58dab ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: df0b5c4a7d ("media: add imx355 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This V4L2 subdev driver enables Digital Camera Memory Interface
Pixel Processor(DCMIPP) of STMicroelectronics STM32 SoC series.
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: remove empty line at end of source]
Add the entry related to the STM32 MEDIA DCMIPP driver within the
MAINTAINERS file.
Add myself as maintainer of the DCMI driver as well.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Arrange files alphabetically.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Allow parsing of the v4l2_fwnode properties from the DT and addition
of those properties (such as orientation, rotation).
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Any V4L2 subdevice that implements controls and declares
V4L2_SUBDEV_FL_HAS_DEVNODE should also declare V4L2_SUBDEV_FL_HAS_EVENTS
and implement subscribe_event and unsubscribe_event hooks.
With that done, v4l2-compliance testing is now ok.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add support of MEDIA_BUS_FMT_Y8_1X8.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
link_frequency variable within struct mipid02_dev seems to have never
been used hence remove it.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Store formats information within pad allowing to simplify further more
the driver (mutex / format store within the driver structure no more
necessary).
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
[Sakari Ailus: Address init_cfg -> init_state API change.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use cci_read & cci_write functions for accessing registers.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As explained in the following series, subdev do not have to keep
track of their streaming status:
https://lore.kernel.org/linux-media/20230914181704.4811-1-laurent.pinchart@ideasonboard.com/
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
[Sakari Ailus: Remove redundant local variable in mipid02_set_fmt.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the helper v4l2_get_link_freq instead of performing manually
check of the LINK_FREQ or PIXELRATE ctrls.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use a copy of the struct v4l2_subdev_format when propagating
format from the sink to source pad in order to avoid impacting the
sink format returned to the application.
Thanks to Jacopo Mondi for pointing the issue.
Fixes: 6c01e6f3f2 ("media: st-mipid02: Propagate format from sink to source pad")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Parse MIPI DisCo for Imaging properties "mipi-img-lens-focus" and
"mipi-img-flash-leds" for VCMs and flash LEDs.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The subdev .init_cfg() operation is affected by two issues:
- It has long been extended to initialize a whole v4l2_subdev_state
instead of just a v4l2_subdev_pad_config, but its name has stuck
around.
- Despite operating on a whole subdev state and not being directly
exposed to the subdev users (either in-kernel or through the userspace
API), .init_cfg() is categorized as a subdev pad operation.
This participates in making the subdev API confusing for new developers.
Fix it by renaming the operation to .init_state(), and make it a subdev
internal operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michael Riesch <michael.riesch@wolfvision.net> # for imx415
Acked-by: Shuah Khan <skhan@linuxfoundation.org> # for vimc
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[Sakari Ailus: Resolved a conflict in Renesas vsp1 driver.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The THP7312 is an external camera ISP from THine. Add a V4L2 subdev
driver for it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: squash a patch to fix missing mutex_unlock by Laurent.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The THP7312 is an external ISP from THine. As such, it implements a
large number of parameters to control all aspects of the image
processing. Many of those controls are already standard in V4L2, but
some are fairly device-specific.
Reserve a range of 32 controls for the device. The driver will implement
4 device-specific controls to start with, define and document them. 28
additional device-specific controls should be enough for future
development.
Co-developed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The THP7312 is an external ISP from THine. Add DT bindings for it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add fwnode_name_eq() to implement the functionality of of_node_name_eq()
on fwnode property API. The same convention of ending the comparison at
'@' (besides NUL) is applied on also both ACPI and swnode. The function
is intended for comparing unit address-less node names on DT and firmware
or swnodes compliant with DT bindings.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Addition of support for the Galaxy Core GC2145 XVGA sensor.
The sensor supports both DVP and CSI-2 interfaces however for
the time being only CSI-2 is implemented.
Configurations are currently based on initialization scripts
coming from Galaxy Core and so for that purpose only 3 static
resolutions are supported:
- 640x480
- 1280x720
- 1600x1200
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a vendor prefix entry for galaxycore (https://www.gcoreinc.com)
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
V4L2 subdev operations have moved from operating on a
v4l2_subdev_pad_config to a v4l2_subdev_state a long time ago. Fix
remaining incorrect references to pad config in function and variable
names.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmVsT/geHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGUiMH/0dKqVU0d9Dt1OA8
vYX7PZi51piRjYCOBr1jdK2Ovkucmgu48O2/oGlfBHmFkCmMeladRIMDMidS3Z52
2YlILyX5LUUrWfS2441cT/16AVds7VXUZV+8TccalBKLuJHQWVR+ifntSLTihO6c
EcvEBpdy1HO0nSw70rGhipMZm9+K8F+JBYc9ews/3ylexC4AeUzIET69YP9/q+Ne
yYbH0TyJYtm+cDN1IFmyJcJ0CtjdKXGvgNGW6Klq8jJA/aiPn2lRlsGw+0SThkkc
DhVGm5aBYFMP/iIvXNDSKrwHArdTE79d/jiyhlzuThLvaT7aFcpnbP5pD5G4Ds0V
2M+4Faw=
=Qz5G
-----END PGP SIGNATURE-----
Merge tag 'v6.7-rc4' into media_stage
Linux 6.7-rc4
This is needed for a vsp1 fix that upcoming media patches depend on.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----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=g+0x
-----END PGP SIGNATURE-----
Merge tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Two fallocate fixes
- Fix warnings from new gcc
- Two symlink fixes
* tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client, common: fix fortify warnings
cifs: Fix FALLOC_FL_INSERT_RANGE by setting i_size after EOF moved
cifs: Fix FALLOC_FL_ZERO_RANGE by setting i_size if EOF moved
smb: client: report correct st_size for SMB and NFS symlinks
smb: client: fix missing mode bits for SMB symlinks
This pull request includes a single patch to fix long-standing issue of
memory leak at failure of device registration for fw_unit. We rarely
encounter the issue, while it should be applied to stable releases, since
it fixes inappropriate API usage.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZWrgUQAKCRCsLtaWM8Lw
Ew8iAQDWPv5JItuZneeRs6NisGxtwNxyxP+O3qmSG4LxXOVfzAEA+K7ubreLee2a
lfZkWPeZnWtSIdN+eAm4JfKMhzDfrA4=
=oODB
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single patch to fix long-standing issue of memory leak at failure of
device registration for fw_unit. We rarely encounter the issue, but it
should be applied to stable releases, since it fixes inappropriate API
usage"
* tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix possible memory leak in create_units()
- Fix corruption of f0/vs0 during FP/Vector save, seen as userspace crashes
when using io-uring workers (in particular with MariaDB).
- Fix KVM_RUN potentially clobbering all host userspace FP/Vector registers.
Thanks to: Timothy Pearson, Jens Axboe, Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=v1AA
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix corruption of f0/vs0 during FP/Vector save, seen as userspace
crashes when using io-uring workers (in particular with MariaDB)
- Fix KVM_RUN potentially clobbering all host userspace FP/Vector
registers
Thanks to Timothy Pearson, Jens Axboe, and Nicholas Piggin.
* tag 'powerpc-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers
powerpc: Don't clobber f0/vs0 during fp|altivec register save
- Fix the lifecycle of a mutex in the pds variant driver such that
a reset prior to opening the device won't find it uninitialized.
Implement the release path to symmetrically destroy the mutex.
Also switch a different lock from spinlock to mutex as the code
path has the potential to sleep and doesn't need the spinlock
context otherwise. (Brett Creeley)
- Fix an issue detected via randconfig where KVM tries to symbol_get
an undeclared function. The symbol is temporarily declared
unconditionally here, which resolves the problem and avoids churn
relative to a series pending for the next merge window which
resolves some of this symbol ugliness, but also fixes Kconfig
dependencies. (Sean Christopherson)
-----BEGIN PGP SIGNATURE-----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=p0kR
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfio
Pull vfio fixes from Alex Williamson:
- Fix the lifecycle of a mutex in the pds variant driver such that a
reset prior to opening the device won't find it uninitialized.
Implement the release path to symmetrically destroy the mutex. Also
switch a different lock from spinlock to mutex as the code path has
the potential to sleep and doesn't need the spinlock context
otherwise (Brett Creeley)
- Fix an issue detected via randconfig where KVM tries to symbol_get an
undeclared function. The symbol is temporarily declared
unconditionally here, which resolves the problem and avoids churn
relative to a series pending for the next merge window which resolves
some of this symbol ugliness, but also fixes Kconfig dependencies
(Sean Christopherson)
* tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfio:
vfio: Drop vfio_file_iommu_group() stub to fudge around a KVM wart
vfio/pds: Fix possible sleep while in atomic context
vfio/pds: Fix mutex lock->magic != lock warning
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZWraswAKCRCAXGG7T9hj
vlV0AP9241p7vHlIW6PIdfNZt9/dZZpuFnKHz+cE99pTZDl5nwEAoYqXUm/kEb14
VAy7x0XIVdEt+9l4bgO2Qggx+Y184Qs=
=APgm
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.7a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A fix for the Xen event driver setting the correct return value when
experiencing an allocation failure
- A fix for allocating space for a struct in the percpu area to not
cross page boundaries (this one is for x86, a similar one for Arm was
already in the pull request for rc3)
* tag 'for-linus-6.7a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: fix error code in xen_bind_pirq_msi_to_irq()
x86/xen: fix percpu vcpu_info allocation
- objpool: Fix objpool overrun case on memory/cache access delay especially
on the big.LITTLE SoC. The objpool uses a copy of object slot index
internal loop, but the slot index can be changed on another processor
in parallel. In that case, the difference of 'head' local copy and the
'slot->last' index will be bigger than local slot size. In that case,
we need to re-read the slot::head to update it.
- kretprobe: Fix to use appropriate rcu API for kretprobe holder. Since
kretprobe_holder::rp is RCU managed, it should use rcu_assign_pointer()
and rcu_dereference_check() correctly. Also adding __rcu tag for
finding wrong usage by sparse.
- rethook: Fix to use appropriate rcu API for rethook::handler. The same
as kretprobe, rethook::handler is RCU managed and it should use
rcu_assign_pointer() and rcu_dereference_check(). This also adds __rcu
tag for finding wrong usage by sparse.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmVpfBobHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bNyMIAJSLICKQNuFiBJEn/rty
ACWJ9QMOnwi0DoVaepG/m9QJh6AIUUFW4//9helmSm0GIVzxQ2+f8UeKU+sYiVtH
ro9atea4W4+FMTvtEB1cU8oG5CDVT4WQdUXbjMktqYe3+WB8Zt8+fIP0mnbTFAVr
yStpliGPecmlupJVRYqrJGyDdbkUxXxVlPsP/eDrHFgbBWv8Incw0f+MLGSi6LSE
sZ1MaKCdi2tlHbtD/fiowfLoBMZwQAKY4hq/XguVsWh+BGaGUgwtif+8ESwPeu22
KEZLyWDQ1N8XBHyOBotV7vsBEwh6LKtLGVXIBsO4KxVyGw6msxWBis0dt/tkn+kk
LEg=
=B9WK
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- objpool: Fix objpool overrun case on memory/cache access delay
especially on the big.LITTLE SoC. The objpool uses a copy of object
slot index internal loop, but the slot index can be changed on
another processor in parallel. In that case, the difference of 'head'
local copy and the 'slot->last' index will be bigger than local slot
size. In that case, we need to re-read the slot::head to update it.
- kretprobe: Fix to use appropriate rcu API for kretprobe holder. Since
kretprobe_holder::rp is RCU managed, it should use
rcu_assign_pointer() and rcu_dereference_check() correctly. Also
adding __rcu tag for finding wrong usage by sparse.
- rethook: Fix to use appropriate rcu API for rethook::handler. The
same as kretprobe, rethook::handler is RCU managed and it should use
rcu_assign_pointer() and rcu_dereference_check(). This also adds
__rcu tag for finding wrong usage by sparse.
* tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rethook: Use __rcu pointer for rethook::handler
kprobes: consistent rcu api usage for kretprobe holder
lib: objpool: fix head overrun on RK3588 SBC
- Fix the AMD P-state driver's EPP sysfs interface in the cases when the
performance governor is in use (Ayush Jain).
- Make the ->fast_switch() callback in the AMD P-state driver return the
target frequency as expected (Gautham R. Shenoy).
- Allow user space to control the range of frequencies to use via
scaling_min_freq and scaling_max_freq when AMD P-state driver is in
use (Wyes Karny).
- Prevent power domains needed for wakeup signaling from being turned
off during system suspend on Qualcomm systems and prevent performance
states votes from runtime-suspended devices from being lost across
a system suspend-resume cycle in qcom-cpufreq-nvmem (Stephan Gerhold).
- Fix disabling the 792 Mhz OPP in the imx6q cpufreq driver for the
i.MX6ULL types that can run at that frequency (Christoph Niedermaier).
- Eliminate unnecessary and harmful conversions to uW from the DTPM
(dynamic thermal and power management) framework (Lukasz Luba).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmVqSX8SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxoGMP/1FOjpggmrnlRw9mwZqeyJPSg60A9JSJ
2/OMFc5Up3taWn2YVayk9GI9zbkv6GlVOuJvPFQmi6O6vAG8uYuJUIns/8jnGE4b
qT7wUKJmXrOakkyJgwByafsjjTqdV+IyVYiTlfbuyGby1I2GlGa+GGMvEbXGZdfz
DwOmB2O+3GkxrVnbN39BXsapONAdjEeTuEB1U8bjNohhow08GhbC32B4fbJirsAA
kmtPH94UX20JguXw9PXcszlyZWM0wEux2hXcJ2WrRid1O/Iz9/NbNEKMKGJ7CLFo
SSh9Lkx+kjLnNnmY6XkH7wPqyBT/seDzPyn2vHD3p0KFoc69ca+zhcplJKNSgvuO
k4kTllXfvC6x27eoBMOLfaGhYMbQgpzZ2LKZp0FF3lTa/a6JjAV4Hc2AisAGnGeu
5QZ2UjZAZg1Pq/SmOjQtKNupY8LGt99vxmHLs+CPcJIm//dKmshkOQ3eOoOKl/0W
e/B6tBenJGcTUU7B56cdtyeGAFdozqIEn9EQEtCswv1kLmbVvDeVGNcBRahADQXa
EXqUcdCwWM+4ARV4Bim9ZwB4pRjtvEtM9qri5RDxTXZMgFWm3MOKDj0S9mxX7Aps
7pQdtSM4Xa44suP7+oDHfw4c8kTEDyyj5PEW2lWtNfCsnsUBwCfcQx3jg0j9lY9o
KtBJ8f+4Acku
=/TF9
-----END PGP SIGNATURE-----
Merge tag 'pm-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix issues in two cpufreq drivers, in the AMD P-state driver and
in the power-capping DTPM framework.
Specifics:
- Fix the AMD P-state driver's EPP sysfs interface in the cases when
the performance governor is in use (Ayush Jain)
- Make the ->fast_switch() callback in the AMD P-state driver return
the target frequency as expected (Gautham R. Shenoy)
- Allow user space to control the range of frequencies to use via
scaling_min_freq and scaling_max_freq when AMD P-state driver is in
use (Wyes Karny)
- Prevent power domains needed for wakeup signaling from being turned
off during system suspend on Qualcomm systems and prevent
performance states votes from runtime-suspended devices from being
lost across a system suspend-resume cycle in qcom-cpufreq-nvmem
(Stephan Gerhold)
- Fix disabling the 792 Mhz OPP in the imx6q cpufreq driver for the
i.MX6ULL types that can run at that frequency (Christoph
Niedermaier)
- Eliminate unnecessary and harmful conversions to uW from the DTPM
(dynamic thermal and power management) framework (Lukasz Luba)"
* tag 'pm-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Only print supported EPP values for performance governor
cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq update
powercap: DTPM: Fix unneeded conversions to micro-Watts
cpufreq/amd-pstate: Fix the return value of amd_pstate_fast_switch()
pmdomain: qcom: rpmpd: Set GENPD_FLAG_ACTIVE_WAKEUP
cpufreq: qcom-nvmem: Preserve PM domain votes in system suspend
cpufreq: qcom-nvmem: Enable virtual power domain devices
cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily
- Fix a recently introduced build issue on ARM32 platforms caused by an
inadvertent header file breakage (Dave Jiang).
- Eliminate questionable usage of acpi_driver_data() in the ACPI
backlight cooling device code that leads to NULL pointer dereferences
after recent ACPI core changes (Hans de Goede).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmVqSGMSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxKBsP/RqwUb8oNYxreUmKgIVZ0H8SnPRfluVP
4St+HeTxsmdN+obglVUWnhZMViewGsionLuq0y/FrYoWLI2F08UQAU8i248h20aZ
nGXalM+n5H517dOidTJzvGxKHMOA2TrzyVna/IcQAYLnbXmp25j8EdHmuhrI3KfK
3yxXLe+6J22776U/MMyutR+rwTVE0tgfQOWM4YuxT67uUPQVkKX+3/uYt/EfkKsX
Dz2ce/5vF28JDjv/yTxaoctMpmjjem97av0J7Y1EM/5K9kTZ070U8OZhYEgBHw5o
pRalhQlNz5VI/KQy3Mc8n4DmrwrPoktCBI0pQPr8FV56dmCFmTaFY1C4/SxebTr4
O2U3r5GkmcxLCKZXAUUAc8J+M6BBRHNQtlpBN3iNRG4ID2x72idPn5fr02UeGk4g
lxysNzcIwxcOuogeKTD2IERzLZA7Ub3qm8gguFOMqnxV1nmPx6f1nl1MuxLsJY4e
ZQwrwZCDJr5CZUrvJz6Mo9HUibLQOELgtsWinKV9OYUgTOfQ69t+XuwsPYIYtQiH
UV7qfE+ZLiG/jZPgP6tfN6InbtB9I4xXNMhKyoZrGTNtbKUVLdDHJH62/vIyHBXQ
VuLr9jH+CuyRjJSRCnbWA1BWkLhWfHQnFaq9UVWAWkVd8MisGVolnCSPGjUyQur7
ZT7i3c13nxJ2
=ANS/
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"This fixes a recently introduced build issue on ARM32 and a NULL
pointer dereference in the ACPI backlight driver due to a design issue
exposed by a recent change in the ACPI bus type code.
Specifics:
- Fix a recently introduced build issue on ARM32 platforms caused by
an inadvertent header file breakage (Dave Jiang)
- Eliminate questionable usage of acpi_driver_data() in the ACPI
backlight cooling device code that leads to NULL pointer
dereferences after recent ACPI core changes (Hans de Goede)"
* tag 'acpi-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Use acpi_video_device for cooling-dev driver data
ACPI: Fix ARM32 platforms compile issue introduced by fw_table changes
systems that don't need it.
-----BEGIN PGP SIGNATURE-----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=kXj+
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix a regression where the arm64 KPTI ends up enabled even on systems
that don't need it"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Avoid enabling KPTI unnecessarily
Including:
- Fix race conditions in device probe path
- Handle ERR_PTR() returns in __iommu_domain_alloc() path
- Update MAINTAINERS entry for Qualcom IOMMUs
- Printk argument fix in device tree specific code
- Several Intel VT-d fixes from Lu Baolu:
- Do not support enforcing cache coherency for non-empty domains
- Avoid devTLB invalidation if iommu is off
- Disable PCI ATS in legacy passthrough mode
- Support non-PCI devices when clearing context
- Fix incorrect cache invalidation for mm notification
- Add MTL to quirk list to skip TE disabling
- Set variable intel_dirty_ops to static
-----BEGIN PGP SIGNATURE-----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=O/Sr
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix race conditions in device probe path
- Handle ERR_PTR() returns in __iommu_domain_alloc() path
- Update MAINTAINERS entry for Qualcom IOMMUs
- Printk argument fix in device tree specific code
- Several Intel VT-d fixes from Lu Baolu:
- Do not support enforcing cache coherency for non-empty domains
- Avoid devTLB invalidation if iommu is off
- Disable PCI ATS in legacy passthrough mode
- Support non-PCI devices when clearing context
- Fix incorrect cache invalidation for mm notification
- Add MTL to quirk list to skip TE disabling
- Set variable intel_dirty_ops to static
* tag 'iommu-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix printk arg in of_iommu_get_resv_regions()
iommu/vt-d: Set variable intel_dirty_ops to static
iommu/vt-d: Fix incorrect cache invalidation for mm notification
iommu/vt-d: Add MTL to quirk list to skip TE disabling
iommu/vt-d: Make context clearing consistent with context mapping
iommu/vt-d: Disable PCI ATS in legacy passthrough mode
iommu/vt-d: Omit devTLB invalidation requests when TES=0
iommu/vt-d: Support enforce_cache_coherency only for empty domains
iommu: Avoid more races around device probe
MAINTAINERS: list all Qualcomm IOMMU drivers in the QUALCOMM IOMMU entry
iommu: Flow ERR_PTR out from __iommu_domain_alloc()
