With the gcc driver now being more complete and describing clocks which
might not always be write-accessible to the OS, conservatively specify
all such clocks as protected in the SoC dts.
The board dts - or even user-supplied dts - can override this property
to reflect the actual configuration.
Signed-off-by: Michael Srba <michael.srba@seznam.cz>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411072156.24451-6-michael.srba@seznam.cz
Add definitions of four clocks which need to be manipulated in order to
initialize the AHB bus which exposes the SCC block in the global address
space.
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411072156.24451-2-michael.srba@seznam.cz
Remove regulator-always-on property where not necessary and mark regulators
that are not supposed to be voted active on boot with regulator-boot-on.
While at it, reorder the load properties to make it look more decent.
Reorder PMICs to fix a probe defer caused by messy dependencies and Linux's
inability to handle them (at least for now).
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-12-konrad.dybcio@somainline.org
Make sure the necessary clocks are kept on after clk_cleanup (until MDSS
is properly handled by its own driver) and touch up the fb address to
prevent some weird shifting. It's still not perfect, but at least the
kernel log doesn't start a third deep into your screen..
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Folded in change of framebuffer base address, from Konrad]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-10-konrad.dybcio@somainline.org
Now that proper msm8992 support is in the driver, switch to
the new compatible.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-7-konrad.dybcio@somainline.org
The phone seems to randomly crash when more than 1 CPU is enabled, which
is probably related to lack of some driver.
Restrict the device to only use a single core until this is solved.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-4-konrad.dybcio@somainline.org
The sleep clock name expected by GCC is actually "sleep" and not
"sleep_clk". Fix the clock-names value for it to make sure it is
provided.
Fixes: 9204da57cd65 ("arm64: dts: qcom: msm8994: Provide missing "xo_board" and "sleep_clk" to GCC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-2-konrad.dybcio@somainline.org
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 7c1dffd471 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220302225411.2456001-5-dmitry.baryshkov@linaro.org
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 08c2a076d1 ("arm64: dts: qcom: sdm845: Add dpu to sdm845 dts file")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220302225411.2456001-4-dmitry.baryshkov@linaro.org
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: ab29028439 ("arm64: dts: qcom: sdm660: Add required nodes for DSI1")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220302225411.2456001-3-dmitry.baryshkov@linaro.org
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: b52555d590 ("arm64: dts: qcom: sdm630: Add MDSS nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220302225411.2456001-2-dmitry.baryshkov@linaro.org
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 12d5403757 ("arm64: dts: qcom: msm8996: Add DSI0 nodes")
Fixes: 3a4547c1fc ("arm64: qcom: msm8996.dtsi: Add Display nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220302225411.2456001-1-dmitry.baryshkov@linaro.org
Add device tree node for the first PCIe host found on the Qualcomm
SM8450 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220301061500.2110569-3-dmitry.baryshkov@linaro.org
The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic
properties that are needed in a device tree. Also add clock ids for
LPASS core clocks and audio clock IDs for LPASS client to request for
the clocks.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220223172248.18877-1-tdas@codeaurora.org
The huawei-g7 uses the msm8916-wcd-digital/analog audio codecs similar
to apq8016-sbc, so we can mostly copy paste it from there to make audio
work correctly. The main difference is the hphl-jack-type-normally-open
property, which is needed to avoid inverted audio jack detection.
Note that at least on my device the jack detection is not fully
reliable: sometimes headphones are detected as headsets (with
microphone). However, this is not a big problem for typical usage.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220410195113.13646-3-stephan@gerhold.net
The comment with installation instructions in the huawei-g7 device tree
is a bit misleading and does not describe the recommended installation
steps very well. The bootloader is actually not patched; to avoid all
trouble with the vendor bootloader it is easier to bypass it completely
by jumping to a custom bootloader (e.g. based on the open-source LK
released by Qualcomm).
To avoid confusion, simplify the comment to state only the problem
and then refer to the wiki article which contains detailed suggested
installation instructions. This will also make it easier to keep it
up to date with new developments in the future.
Fixes: 55056b2291 ("arm64: dts: qcom: msm8916: Add device tree for Huawei Ascend G7")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220410195113.13646-2-stephan@gerhold.net
Fix the following 'make dtbs_check' warning(s) by
using phy@ instead of lanes@ and by moving '#clock-cells' to
sub-node:
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: ssphy@78000:
'lane@78200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
[bjorn: s/clock-names/clock-cells/ per Shawn's feedback]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228123019.382037-7-bhupesh.sharma@linaro.org
Fix the 'make dtbs_check' warning:
arch/arm64/boot/dts/qcom/sm8450-qrd.dt.yaml: phy@1d87000:
'lanes@1d87400' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228123019.382037-6-bhupesh.sharma@linaro.org
Fix the 'make dtbs_check' warning:
arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml: phy@1c0e000:
'lanes@1c0e200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228123019.382037-5-bhupesh.sharma@linaro.org
The following properties are not supported and causing dtbs_check
warnings.
- vdda-phy-max-microamp
- vdda-pll-max-microamp
- vddp-ref-clk-max-microamp
- vddp-ref-clk-always-on
arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dt.yaml: phy@627000:
'vdda-phy-max-microamp', 'vddp-ref-clk-always-on', 'vddp-ref-clk-max-microamp'
do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
Drop them from QMP PHY nodes for 'msm8996-xiaomi' dts.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228123019.382037-4-bhupesh.sharma@linaro.org
