These callbacks are just wrappers to keep the code relatively clean.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During the hw_params and hw_free stages, we need to map the stream tag
and channels in the PCMSyCM registers.
The trigger callback is just a wrapper.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Same abstraction as SSP/DMIC, with only the get_hlink helper changing.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we have multiple CPU DAIs in a dailink, typically for SoundWire
aggregated solutions with amplifiers on multiple links, we only want
to allocate one HDaudio stream_tag. The simplest solution is to
allocate the hext_stream/stream_tag for the DAI with index 0 in the
dailink, and reuse the same stream for all other CPU DAIs.
This assumption relies on serialization of DAIs by the ASoC core,
where all CPU DAIs are handled in a loop.
The stream release follows the same idea of releasing the tag for the
first DAI only. Ideally we would want the loop to be handled in
reverse-order to summetry, but there is no risk of reusing a
stream_tag which is no longer valid.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can reuse the same helpers as for SSP, with just the link type
being different.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new ops for SSP.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DMA widget ops are almost similar to the HDaudio ones, with the
exception of codec_dai_set_hext_stream() which is not relevant and the
format calculation which isn't dependent on the codec dai.
The DMA ops can be selected only starting with ACE_2_0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the LunarLake hardware, the default IP ownership changed to the
host driver, instead of the firmware in previous generation.
In the absence of any capability negotiation, we need to assume a
fixed partitioning between host driver and firmware. The OFLEN bit
needs to be set as early as possible for resources handled by the
firmware, since we can't control when the firmware might try to access
the resources.
For now DMIC and SSP are handled by the DSP firmware. SoundWire is a
separate case, the OFLEN bit can be set when starting-up and resuming
the aux device for each link.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It was just a matter of time before we found a case where we needed
separate ops for MTL and LNL. For LNL we need to set the DMIC/SSP
OFLEN bit in the probe and resume steps, and this can only be done
cleanly with separate ops.
The function prototypes in mtl.h were added in the same order as their
implementation in mtl.c.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add initial support for Lunarlake. For now only HDAudio interfaces are
supported, DMIC/SSP/SoundWire require additional work so that the DAIs
reuse the HDaudio DMA stream allocation.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All interfaces are accessible without the DSP and rely on the HDaudio
DMA only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial code had a logic flaw where the gateway config length kept
increasing after each playback/capture trigger, with the DMA config
TLV being added at every call of sof_ipc4_prepare_copier_module()
This didn't cause any issues with regular playback/capture, but this
was flagged as an error by firmware in the case of multiple amplifiers
on different links.
Fixes: a0659f81c3 ("ASoC: SOF: ipc4-topology: add DMA config TLV to IPC data")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a pipeline contains multiple DAI widgets, the pipe_widget is not
set up except for the first DAI. This result in the pipe_widget having
a default instance 0, which can conflict with another real the
pipeline instance 0 and leads to spurious transitions.
This patch makes sure the instance_id is properly initialized to a
-EINVAL value.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Likely a combination of copy-paste and test coverage problem. Oops.
Fixes: 87a6ddc0cf ("ASoC: SOF: Intel: hda-mlink: program SoundWire LSDIID registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HCHAN parameter should be the highest channel number, not the
channel count.
While we're at it, handle LCHAN with the dual __ffs helper.
Fixes: ccc2f0c1b6 ("ASoC: SOF: Intel: hda-mlink: add helper to program SoundWire PCMSyCM registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expand the HDA/I915 connectivity check to correctly handle
the PCI topology used in some Intel Arrow Lake products.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: "T, Arun" <arun.t@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One more PCI ID for the road.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add part ID to common include file
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use PCI device IDs from pci_ids.h header. BSW replaces CHV, as 0x22a8
was added in PCI header as BSW ID for consistency, as they are same
(similar) platforms. The ACPI IDs are used only internally and lower
16 bits uniquely define the device as vendor ID for Intel is 8086 for
all of them. Use PCI_DEVICE_DATA() to match PCI device to be consistent
with other Intel audio drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-16-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use PCI device IDs from pci_ids.h header and while at it change to using
PCI_DEVICE_DATA() macro, to simplify declarations.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-15-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use PCI device IDs from pci_ids.h header and while at it change to using
PCI_DEVICE_DATA() macro, to simplify declarations. As Apollolake is
Broxton-P successor that made it to the market, be precise and use APL
shortcut.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-14-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use PCI device IDs from pci_ids.h header. Adjust AVS_MACH_ENTRY() macro,
so device ID can be provided in short form.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-13-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use PCI device IDs from pci_ids.h header and while at it change to using
PCI_DEVICE_DATA() macro, to simplify declarations.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-12-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use PCI device IDs from pci_ids.h header and while at it to simplify
declarations change to using PCI_DEVICE_DATA() macro for Intel IDs and
PCI_VDEVICE() for all other that have defined vendor.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-11-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use PCI device IDs from pci_ids.h header. Also simplify comments for
Alder Lake and Raptor Lake platforms, as new IDs make it clear what
revision is in use.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # for Intel Tangier ID
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-10-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of using local macro to match PCI device, use global one. As
Apollolake is Broxton-P successor that made it to the market, be precise
and use APL shortcut. IS_CFL() macro is dropped as it is unused.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-9-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of using local macro to match PCI device, use global one.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-8-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of using local macro to match PCI device, use global one. As
Apollolake is Broxton-P successor that made it to the market, be precise
and use APL shortcut.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some HDA controllers require additional handling, so there are macros to
match them, however those are spread across multiple files. Add them all
in one place, so they can be reused.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current code references 0x1a98 which is BXT-M (not -T as it is
commented) and it's an RVP, BXT-M B0 to be specific. From what we know
no BXT is available on market.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current code references 0x1a98 which is BXT-M (not -T as it is
commented) and it's an RVP, BXT-M B0 to be specific. From what we know
no BXT is available on market.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Those IDs are mostly sprinkled between HDA, Skylake, SOF and avs drivers.
Almost every use contains additional comments to identify to which
platform those IDs refer to. Add those IDs to pci_ids.h header, so that
there is one place which defines those names.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # for the Intel Tangier ID
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of the PCI IDs are not sorted correctly, reorder them by growing ID
number.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
group exists yet but the code still goes and iterates over event
siblings
-----BEGIN PGP SIGNATURE-----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=KqCi
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Fix a lockdep warning when the event given is the first one, no event
group exists yet but the code still goes and iterates over event
siblings
* tag 'perf_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix lockdep warning in for_each_sibling_event() on SPR
doing an inter-procedural optimization and confuse objtool
- Initialize struct elf fully to avoid build failures
-----BEGIN PGP SIGNATURE-----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=fq/x
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Mark copy_iovec_from_user() __noclone in order to prevent gcc from
doing an inter-procedural optimization and confuse objtool
- Initialize struct elf fully to avoid build failures
* tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iov_iter: Mark copy_iovec_from_user() noclone
objtool: initialize all of struct elf
- Fix the idle sibling selection
-----BEGIN PGP SIGNATURE-----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=bSNb
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Remove a cgroup from under a polling process properly
- Fix the idle sibling selection
* tag 'sched_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/psi: use kernfs polling functions for PSI trigger polling
sched/fair: Use recent_used_cpu to test p->cpus_ptr
- Fix a really annoying interrupt storm in the AMD driver
affecting Asus TUF gaming notebooks.
- Fix device tree parsing in the Renesas driver.
-----BEGIN PGP SIGNATURE-----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=LMMZ
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"I'm mostly on vacation but what would vacation be without a few
critical fixes so people can use their gaming laptops when hiding away
from the sun (or rain)?
- Fix a really annoying interrupt storm in the AMD driver affecting
Asus TUF gaming notebooks
- Fix device tree parsing in the Renesas driver"
* tag 'pinctrl-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: Unify debounce handling into amd_pinconf_set()
pinctrl: amd: Drop pull up select configuration
pinctrl: amd: Use amd_pinconf_set() for all config options
pinctrl: amd: Only use special debounce behavior for GPIO 0
pinctrl: renesas: rzg2l: Handle non-unique subnode names
pinctrl: renesas: rzv2m: Handle non-unique subnode names
-----BEGIN PGP SIGNATURE-----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=kcX/
-----END PGP SIGNATURE-----
Merge tag '6.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Two reconnect fixes: important fix to address inFlight count to leak
(which can leak credits), and fix for better handling a deleted share
- DFS fix
- SMB1 cleanup fix
- deferred close fix
* tag '6.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix mid leak during reconnection after timeout threshold
cifs: is_network_name_deleted should return a bool
smb: client: fix missed ses refcounting
smb: client: Fix -Wstringop-overflow issues
cifs: if deferred close is disabled then close files immediately
- Fix Speculation_Store_Bypass reporting in /proc/self/status on Power10.
- Fix HPT with 4K pages since recent changes by implementing pmd_same().
- Fix 64-bit native_hpte_remove() to be irq-safe.
Thanks to: Aneesh Kumar K.V, Nageswara R Sastry, Russell Currey.
-----BEGIN PGP SIGNATURE-----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=q5Nn
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix Speculation_Store_Bypass reporting in /proc/self/status on
Power10
- Fix HPT with 4K pages since recent changes by implementing pmd_same()
- Fix 64-bit native_hpte_remove() to be irq-safe
Thanks to Aneesh Kumar K.V, Nageswara R Sastry, and Russell Currey.
* tag 'powerpc-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm/book3s64/hash/4k: Add pmd_same callback for 4K page size
powerpc/64e: Fix obtool warnings in exceptions-64e.S
powerpc/security: Fix Speculation_Store_Bypass reporting on Power10
powerpc/64s: Fix native_hpte_remove() to be irq-safe
- fprobe: Add a comment why fprobe will be skipped if another kprobe is
running in fprobe_kprobe_handler().
- probe-events: Fix some issues related to fetch-argument
. Fix double counting of the string length for user-string and symstr.
This will require longer buffer in the array case.
. Fix not to count error code (minus value) for the total used length
in array argument. This makes the total used length shorter.
. Fix to update dynamic used data size counter only if fetcharg uses
the dynamic size data. This may mis-count the used dynamic data
size and corrupt data.
. Revert "tracing: Add "(fault)" name injection to kernel probes"
because that did not work correctly with a bug, and we agreed the
current '(fault)' output (instead of '"(fault)"' like a string)
explains what happened more clearly.
. Fix to record 0-length (means fault access) data_loc data in fetch
function itself, instead of store_trace_args(). If we record an
array of string, this will fix to save fault access data on each
entry of the array correctly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmSxSlYACgkQ2/sHvwUr
PxupyAgApFDi9YGsmrVbXmIN5y+yGMyio2H6xR7XkX+L02nvDY6uVqL/jgT8pHfI
AeGZEA+EqwxIfWpYBfztsFej+Gl3Elfvu14OSxwaafUlW3mgZFQqw1ZR0HvzXoKJ
8Iw6WOXjhLe3/QLy43UY8JQGOKI07i3gh71wa0W0huOyiwwHuuVwPSY9QJJ2ulSg
OWFSuMFO8IxYimp0BpFu/vrfa8CdgWLc24tgJ5EpZtzu6L0A2I/FMZjnBukxnP9s
rjAXv0uRuSFvvF7/RGCqrLza12525qyHx7d5IWUq5shd3bCnaUOnAieF//MoJaR3
q8McDJK//EPbUvCWgESuuyPS05smyQ==
=iumA
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
- fprobe: Add a comment why fprobe will be skipped if another kprobe is
running in fprobe_kprobe_handler().
- probe-events: Fix some issues related to fetch-arguments:
- Fix double counting of the string length for user-string and
symstr. This will require longer buffer in the array case.
- Fix not to count error code (minus value) for the total used
length in array argument. This makes the total used length
shorter.
- Fix to update dynamic used data size counter only if fetcharg uses
the dynamic size data. This may mis-count the used dynamic data
size and corrupt data.
- Revert "tracing: Add "(fault)" name injection to kernel probes"
because that did not work correctly with a bug, and we agreed the
current '(fault)' output (instead of '"(fault)"' like a string)
explains what happened more clearly.
- Fix to record 0-length (means fault access) data_loc data in fetch
function itself, instead of store_trace_args(). If we record an
array of string, this will fix to save fault access data on each
entry of the array correctly.
* tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails
Revert "tracing: Add "(fault)" name injection to kernel probes"
tracing/probes: Fix to update dynamic data counter if fetcharg uses it
tracing/probes: Fix not to count error code to total length
tracing/probes: Fix to avoid double count of the string length on the array
fprobes: Add a comment why fprobe_kprobe_handler exits if kprobe is running
A couple of fairly minor driver specific fixes here, plus a bunch of
maintainership and admin updates. Nothing too remarkable.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSyiH8ACgkQJNaLcl1U
h9AONwf9F4qxceaYLgOcCvY+kqamIXLaX7RMuBlVxaNSowBQdK0V0TMnyJ0SKhKN
pN2lTRJBg9uHka5UoUNDnwbLPdhrGymSAMZRwytxztC+n1SCi+ic3R4YRhBG7Aql
n8kxZqzzg0hWrV0eVD1tTMx2fhab6/qfyAsBVyup6VpwfLyHyQ1bB/74m9F21GZL
2TK3PdElAF4pj1ug6c1LiMqgP41dxuh/oKFUTL2FSt8apIIrw66F3GNb/ANoqd/d
40oNMsgSYEgkUZJqGha6pS/zrLdT1/+zJ7jayy9odSTqRR6/1e+FoPz6wthZb0XC
iCMthULffLhmy4dIHBZhIbU29J15Pg==
=9Sbr
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fairly minor driver specific fixes here, plus a bunch of
maintainership and admin updates. Nothing too remarkable"
* tag 'spi-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
mailmap: add entry for Jonas Gorski
MAINTAINERS: add myself for spi-bcm63xx
spi: s3c64xx: clear loopback bit after loopback test
spi: bcm63xx: fix max prepend length
MAINTAINERS: Add myself as a maintainer for Microchip SPI
One fix for an out of bounds access in the interupt code here.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSyiBQACgkQJNaLcl1U
h9BIYAf/crdxL07Kw9AZB9wmYLyjD/+p6GZsBLUmzBe99m1aaxpg9df+xje3jymF
H90A8nx25n7JR3l/BTeJwvwzHjni0vMn1OhzzI86sbaZ4vRf4cgfhvpGlPWqWlVx
3P0S7EwQc8M96bAVMTI1rfn8dc4supv9MMZXOkaLVsQsEHEZq6LIj279q1mL8aLZ
Q4x+rbn9jMh3T8TtM5K2/AFJGTLPi3fmYXvT8L+7Iu/Uk8PmXtw31GS8E/dYPvmt
iWWIdOPnniMOy/DDe/USCZvLyw6lGRS/uc4bh14mrQ3ddJ2RoReUL7AiyyKNXQ3Q
LYQjpQ4/fcPE6JUu/W5eTI9BFE5tEg==
=o9eY
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"One fix for an out of bounds access in the interupt code here"
* tag 'regmap-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Fix out-of-bounds access when allocating config buffers
Including:
- Fix a regression causing a crash on sysfs access of iommu-group
specific files
- Fix signedness bug in SVA code
-----BEGIN PGP SIGNATURE-----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=iFwG
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix a regression causing a crash on sysfs access of iommu-group
specific files
- Fix signedness bug in SVA code
* tag 'iommu-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/sva: Fix signedness bug in iommu_sva_alloc_pasid()
iommu: Fix crash during syfs iommu_groups/N/type
The primary bug Alyssa noticed was that with FineIBT enabled function
prologues have a spurious ENDBR instruction:
__cfi_foo:
endbr64
subl $hash, %r10d
jz 1f
ud2
nop
1:
foo:
endbr64 <--- *sadface*
This means that any indirect call that fails to target the __cfi symbol
and instead targets (the regular old) foo+0, will succeed due to that
second ENDBR.
Fixing this lead to the discovery of a single indirect call that was
still doing this: ret_from_fork(), since that's an assembly stub the
compmiler would not generate the proper kCFI indirect call magic and it
would not get patched.
Brian came up with the most comprehensive fix -- convert the thing to C
with only a very thin asm wrapper. This ensures the kernel thread
boostrap is a proper kCFI call.
While discussing all this, Kees noted that kCFI hashes could/should be
poisoned to seal all functions whose address is never taken, further
limiting the valid kCFI targets -- much like we already do for IBT.
So what was a 'simple' observation and fix cascaded into a bunch of
inter-related CFI infrastructure fixes.
-----BEGIN PGP SIGNATURE-----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=RhPI
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CFI fixes from Peter Zijlstra:
"Fix kCFI/FineIBT weaknesses
The primary bug Alyssa noticed was that with FineIBT enabled function
prologues have a spurious ENDBR instruction:
__cfi_foo:
endbr64
subl $hash, %r10d
jz 1f
ud2
nop
1:
foo:
endbr64 <--- *sadface*
This means that any indirect call that fails to target the __cfi
symbol and instead targets (the regular old) foo+0, will succeed due
to that second ENDBR.
Fixing this led to the discovery of a single indirect call that was
still doing this: ret_from_fork(). Since that's an assembly stub the
compiler would not generate the proper kCFI indirect call magic and it
would not get patched.
Brian came up with the most comprehensive fix -- convert the thing to
C with only a very thin asm wrapper. This ensures the kernel thread
boostrap is a proper kCFI call.
While discussing all this, Kees noted that kCFI hashes could/should be
poisoned to seal all functions whose address is never taken, further
limiting the valid kCFI targets -- much like we already do for IBT.
So what was a 'simple' observation and fix cascaded into a bunch of
inter-related CFI infrastructure fixes"
* tag 'x86_urgent_for_6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cfi: Only define poison_cfi() if CONFIG_X86_KERNEL_IBT=y
x86/fineibt: Poison ENDBR at +0
x86: Rewrite ret_from_fork() in C
x86/32: Remove schedule_tail_wrapper()
x86/cfi: Extend ENDBR sealing to kCFI
x86/alternative: Rename apply_ibt_endbr()
x86/cfi: Extend {JMP,CAKK}_NOSPEC comment
This is a bunch of small driver fixes and a larger rework of zone disk
handling (which reaches into blk and nvme). The aacraid array-bounds
fix is now critical since the security people turned on -Werror for
some build tests, which now fail without it.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZLGSiCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishd/BAPwO2i4t
5uzhcWihoYaIZ6x07oEhgOP/o1h5n5mM908AyAEA6s2hQKDoIxjJexqvkS7lPjni
P8VMcfvOmdsLDCD3nJ4=
=+10g
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a bunch of small driver fixes and a larger rework of zone disk
handling (which reaches into blk and nvme).
The aacraid array-bounds fix is now critical since the security people
turned on -Werror for some build tests, which now fail without it"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: storvsc: Handle SRB status value 0x30
scsi: block: Improve checks in blk_revalidate_disk_zones()
scsi: block: virtio_blk: Set zone limits before revalidating zones
scsi: block: nullblk: Set zone limits before revalidating zones
scsi: nvme: zns: Set zone limits before revalidating zones
scsi: sd_zbc: Set zone limits before revalidating zones
scsi: ufs: core: Add support for qTimestamp attribute
scsi: aacraid: Avoid -Warray-bounds warning
scsi: ufs: ufs-mediatek: Add dependency for RESET_CONTROLLER
scsi: ufs: core: Update contact email for monitor sysfs nodes
scsi: scsi_debug: Remove dead code
scsi: qla2xxx: Use vmalloc_array() and vcalloc()
scsi: fnic: Use vmalloc_array() and vcalloc()
scsi: qla2xxx: Fix error code in qla2x00_start_sp()
scsi: qla2xxx: Silence a static checker warning
scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan()
