mirror of
https://github.com/torvalds/linux.git
synced 2026-09-20 01:20:03 +02:00
185a4caeec
4528 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
David Howells
|
90b3ccf514
|
netfs: Update tracepoints in a number of ways
Make a number of updates to the netfs tracepoints:
(1) Remove a duplicate trace from netfs_unbuffered_write_iter_locked().
(2) Move the trace in netfs_wake_rreq_flag() to after the flag is cleared
so that the change appears in the trace.
(3) Differentiate the use of netfs_rreq_trace_wait/woke_queue symbols.
(4) Don't do so many trace emissions in the wait functions as some of them
are redundant.
(5) In netfs_collect_read_results(), differentiate a subreq that's being
abandoned vs one that has been consumed in a regular way.
(6) Add a tracepoint to indicate the call to ->ki_complete().
(7) Don't double-increment the subreq_counter when retrying a write.
(8) Move the netfs_sreq_trace_io_progress tracepoint within cifs code to
just MID_RESPONSE_RECEIVED and add different tracepoints for other MID
states and note check failure.
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Link: https://lore.kernel.org/20250701163852.2171681-14-dhowells@redhat.com
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
David Howells
|
4e32541076
|
netfs: Renumber the NETFS_RREQ_* flags to make traces easier to read
Renumber the NETFS_RREQ_* flags to put the most useful status bits in the bottom nibble - and therefore the last hex digit in the trace output - making it easier to grasp the state at a glance. In particular, put the IN_PROGRESS flag in bit 0 and ALL_QUEUED at bit 1. Also make the flags field in /proc/fs/netfs/requests larger to accommodate all the flags. Also make the flags field in the netfs_sreq tracepoint larger to accommodate all the NETFS_SREQ_* flags. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250701163852.2171681-13-dhowells@redhat.com Reviewed-by: Paulo Alcantara <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
9df7b5ebea
|
netfs: Fix double put of request
If a netfs request finishes during the pause loop, it will have the ref
that belongs to the IN_PROGRESS flag removed at that point - however, if it
then goes to the final wait loop, that will *also* put the ref because it
sees that the IN_PROGRESS flag is clear and incorrectly assumes that this
happened when it called the collector.
In fact, since IN_PROGRESS is clear, we shouldn't call the collector again
since it's done all the cleanup, such as calling ->ki_complete().
Fix this by making netfs_collect_in_app() just return, indicating that
we're done if IN_PROGRESS is removed.
Fixes:
|
||
|
Jakub Kicinski
|
32155c6fd9 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCaF3LFhUcZGFuaWVsQGlv Z2VhcmJveC5uZXQACgkQ2yufC7HISINtRgD+JagJmBokoPnsk7DfauJnVhaP95aV tsnna+fU1kGwS7MBAMINCoLyeISiD/XG0O+Om38czhhglWbl4+TgrthegPkE =opKf -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2025-06-27 We've added 6 non-merge commits during the last 8 day(s) which contain a total of 6 files changed, 120 insertions(+), 20 deletions(-). The main changes are: 1) Fix RCU usage in task_cls_state() for BPF programs using helpers like bpf_get_cgroup_classid_curr() outside of networking, from Charalampos Mitrodimas. 2) Fix a sockmap race between map_update and a pending workqueue from an earlier map_delete freeing the old psock where both pointed to the same psock->sk, from Jiayuan Chen. 3) Fix a data corruption issue when using bpf_msg_pop_data() in kTLS which failed to recalculate the ciphertext length, also from Jiayuan Chen. 4) Remove xdp_redirect_map{,_err} trace events since they are unused and also hide XDP trace events under CONFIG_BPF_SYSCALL, from Steven Rostedt. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: xdp: tracing: Hide some xdp events under CONFIG_BPF_SYSCALL xdp: Remove unused events xdp_redirect_map and xdp_redirect_map_err net, bpf: Fix RCU usage in task_cls_state() for BPF programs selftests/bpf: Add test to cover ktls with bpf_msg_pop_data bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls bpf, sockmap: Fix psock incorrectly pointing to sk ==================== Link: https://patch.msgid.link/20250626230111.24772-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
28aa52b618 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.16-rc4). Conflicts: Documentation/netlink/specs/mptcp_pm.yaml |
||
|
Zhang Yi
|
f4265b8d32 |
ext4: add FALLOC_FL_WRITE_ZEROES support
Add support for FALLOC_FL_WRITE_ZEROES if the underlying device enable the unmap write zeroes operation. This first allocates blocks as unwritten, then issues a zero command outside of the running journal handle, and finally converts them to a written state. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/20250619111806.3546162-10-yi.zhang@huaweicloud.com Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Liam Merwick
|
741e595f02 |
KVM: Add trace_kvm_vm_set_mem_attributes()
Add a tracing function that, for a guest memory range, displays the start and end addresses plus the per-page attributes being set. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com> Link: https://lore.kernel.org/r/20250609091121.2497429-3-liam.merwick@oracle.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
141db6cd79 |
KVM: Squash two CONFIG_HAVE_KVM_IRQCHIP #ifdefs into one
Squash two #idef CONFIG_HAVE_KVM_IRQCHIP regions in KVM's trace events, as the only code outside of the #idefs depends on CONFIG_KVM_IOAPIC, and that Kconfig only exists for x86, which unconditionally selects HAVE_KVM_IRQCHIP. No functional change intended. Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/r/20250611213557.294358-16-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
628a27731e |
KVM: x86: Add CONFIG_KVM_IOAPIC to allow disabling in-kernel I/O APIC
Add a Kconfig to allow building KVM without support for emulating a I/O APIC, PIC, and PIT, which is desirable for deployments that effectively don't support a fully in-kernel IRQ chip, i.e. never expect any VMM to create an in-kernel I/O APIC. E.g. compiling out support eliminates a few thousand lines of guest-facing code and gives security folks warm fuzzies. As a bonus, wrapping relevant paths with CONFIG_KVM_IOAPIC #ifdefs makes it much easier for readers to understand which bits and pieces exist specifically for fully in-kernel IRQ chips. Opportunistically convert all two in-kernel uses of __KVM_HAVE_IOAPIC to CONFIG_KVM_IOAPIC, e.g. rather than add a second #ifdef to generate a stub for kvm_arch_post_irq_routing_update(). Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/r/20250611213557.294358-15-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Sean Christopherson
|
2c938850d9 |
KVM: Move x86-only tracepoints to x86's trace.h
Move the I/O APIC tracepoints and trace_kvm_msi_set_irq() to x86, as __KVM_HAVE_IOAPIC is just code for "x86", and trace_kvm_msi_set_irq() isn't unique to I/O APIC emulation. Opportunistically clean up the absurdly messy #includes in ioapic.c. No functional change intended. Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/r/20250611213557.294358-14-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Gao Xiang
|
30b5844480 |
erofs: remove unused trace event erofs_destroy_inode
The trace event `erofs_destroy_inode` was added but remains unused. This
unused event contributes approximately 5KB to the kernel module size.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Closes: https://lore.kernel.org/r/20250612224906.15000244@batman.local.home
Fixes:
|
||
|
Shakeel Butt
|
6af89c6ca7 |
cgroup: remove per-cpu per-subsystem locks
The rstat update side used to insert the cgroup whose stats are updated in the update tree and the read side flush the update tree to get the latest uptodate stats. The per-cpu per-subsystem locks were used to synchronize the update and flush side. However now the update side does not access update tree but uses per-cpu lockless lists. So there is no need for locks to synchronize update and flush side. Let's remove them. Suggested-by: JP Kobryn <inwardvessel@gmail.com> Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Tested-by: JP Kobryn <inwardvessel@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Steven Rostedt
|
3cfbde048b |
net/tcp_ao: tracing: Hide tcp_ao events under CONFIG_TCP_AO
Several of the tcp_ao events are only called when CONFIG_TCP_AO is defined. As each event can take up to 5K regardless if they are used or not, it's best not to define them when they are not used. Add #ifdef around these events when they are not used. Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250612094616.4222daf0@batman.local.home Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Tvrtko Ursulin
|
506aa8b02a |
dma-fence: Add safe access helpers and document the rules
Dma-fence objects currently suffer from a potential use after free problem where fences exported to userspace and other drivers can outlive the exporting driver, or the associated data structures. The discussion on how to address this concluded that adding reference counting to all the involved objects is not desirable, since it would need to be very wide reaching and could cause unloadable drivers if another entity would be holding onto a signaled fence reference potentially indefinitely. This patch enables the safe access by introducing and documenting a contract between fence exporters and users. It documents a set of contraints and adds helpers which a) drivers with potential to suffer from the use after free must use and b) users of the dma-fence API must use as well. Premise of the design has multiple sides: 1. Drivers (fence exporters) MUST ensure a RCU grace period between signalling a fence and freeing the driver private data associated with it. The grace period does not have to follow the signalling immediately but HAS to happen before data is freed. 2. Users of the dma-fence API marked with such requirement MUST contain the complete access to the data within a single code block guarded by rcu_read_lock() and rcu_read_unlock(). The combination of the two ensures that whoever sees the DMA_FENCE_FLAG_SIGNALED_BIT not set is guaranteed to have access to a valid fence->lock and valid data potentially accessed by the fence->ops virtual functions, until the call to rcu_read_unlock(). 3. Module unload (fence->ops) disappearing is for now explicitly not handled. That would required a more complex protection, possibly needing SRCU instead of RCU to handle callers such as dma_fence_release() and dma_fence_wait_timeout(), where race between dma_fence_enable_sw_signaling, signalling, and dereference of fence->ops->wait() would need a sleeping SRCU context. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://lore.kernel.org/r/20250610164226.10817-4-tvrtko.ursulin@igalia.com |
||
|
Steven Rostedt
|
16f3c7ad88 |
xdp: tracing: Hide some xdp events under CONFIG_BPF_SYSCALL
The events xdp_cpumap_kthread, xdp_cpumap_enqueue and xdp_devmap_xmit are only called when CONFIG_BPF_SYSCALL is defined. As each event can take up to 5K regardless if they are used or not, it's best not to define them when they are not used. Add #ifdef around these events when they are not used. Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20250612182023.78397b76@batman.local.home Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Steven Rostedt
|
a9a5f41b04 |
xdp: Remove unused events xdp_redirect_map and xdp_redirect_map_err
Each TRACE_EVENT() defined can take up around 5K of text and meta data regardless if they are used or not. New code is being developed that will warn when a tracepoint is defined but not used. The trace events xdp_redirect_map and xdp_redirect_map_err are defined but not used, but there's also a comment that states these are kept around for backward compatibility. Which is interesting because since they are not used, any old BPF program that expects them to exist will get incorrect data (no data) when they use them. It's worse than not working, it's silently failing. Remove them as they will soon cause warnings, or if they really need to stick around, then code needs to be added to use them. Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20250611155615.0c2cf61c@batman.local.home Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Thomas Zimmermann
|
c598d5eb9f |
Merge drm/drm-next into drm-misc-next
Backmerging to forward to v6.16-rc1 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> |
||
|
Kassey Li
|
9d2c232d57 |
scsi: trace: Show rtn in string for scsi_dispatch_cmd_error()
By default the scsi_dispatch_cmd_error() return value is displayed in decimal: kworker/3:1H-183 [003] .... 51.035474: scsi_dispatch_cmd_error: host_no=0 channel=0 id=0 lun=4 data_sgl=1 prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(READ_10 lba=3907214 txlen=1 protect=0 raw=28 00 00 3b 9e 8e 00 00 01 00) rtn=4181 However, these numbers are not particularly helpful wrt. debugging errors. Especially since the kernel code consistently uses the following defines in hexadecimal: SCSI_MLQUEUE_HOST_BUSY 0x1055 SCSI_MLQUEUE_DEVICE_BUSY 0x1056 SCSI_MLQUEUE_EH_RETRY 0x1057 SCSI_MLQUEUE_TARGET_BUSY 0x1058 Switch to using the string form of these values in the trace output: dd-1059 [007] ..... 31.689529: scsi_dispatch_cmd_error: host_no=0 channel=0 id=0 lun=4 data_sgl=65 prot_sgl=0 prot_op=SCSI_PROT_NORMAL driver_tag=23 scheduler_tag=117 cmnd=(READ_10 lba=0 txlen=128 protect=0 raw=28 00 00 00 00 00 00 00 80 00) rtn=SCSI_MLQUEUE_DEVICE_BUSY Signed-off-by: Kassey Li <quic_yingangl@quicinc.com> Link: https://lore.kernel.org/r/20250521011711.1983625-1-quic_yingangl@quicinc.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Linus Torvalds
|
538c429a4b |
tracing fixes:
- Fix regression of waiting a long time on updating trace event filters When the faultable trace points were added, it needed task trace RCU synchronization. This was added to the tracepoint_synchronize_unregister() function. The filter logic always called this function whenever it updated the trace event filters before freeing the old filters. This increased the time of "trace-cmd record" from taking 13 seconds to running over 2 minutes to complete. Move the freeing of the filters to call_rcu*() logic, which brings the time back down to 13 seconds. - Fix ring_buffer_subbuf_order_set() error path lock protection The error path of the ring_buffer_subbuf_order_set() released the mutex too early and allowed subsequent accesses to setting the subbuffer size to corrupt the data and cause a bug. By moving the mutex locking to the end of the error path, it prevents the reentrant access to the critical data and also allows the function to convert the taking of the mutex over to the guard() logic. - Remove unused power management clock events The clock events were added in 2010 for power management. In 2011 arm used them. In 2013 the code they were used in was removed. These events have been wasting memory since then. - Fix sparse warnings There was a few places that sparse warned about trace_events_filter.c where file->filter was referenced directly, but it is annotated with an __rcu tag. Use the helper functions and fix them up to use rcu_dereference() properly. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaEST0xQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qgdSAPoD7L17oeiP5KQkM0wPuPBz0tmJF7XE 2VmHp1lBu5rYwgEAyHTD7SqWvInMMp9sGt5tzkByXpOsYC65/RprkbFpXwA= =s4wK -----END PGP SIGNATURE----- Merge tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull more tracing fixes from Steven Rostedt: - Fix regression of waiting a long time on updating trace event filters When the faultable trace points were added, it needed task trace RCU synchronization. This was added to the tracepoint_synchronize_unregister() function. The filter logic always called this function whenever it updated the trace event filters before freeing the old filters. This increased the time of "trace-cmd record" from taking 13 seconds to running over 2 minutes to complete. Move the freeing of the filters to call_rcu*() logic, which brings the time back down to 13 seconds. - Fix ring_buffer_subbuf_order_set() error path lock protection The error path of the ring_buffer_subbuf_order_set() released the mutex too early and allowed subsequent accesses to setting the subbuffer size to corrupt the data and cause a bug. By moving the mutex locking to the end of the error path, it prevents the reentrant access to the critical data and also allows the function to convert the taking of the mutex over to the guard() logic. - Remove unused power management clock events The clock events were added in 2010 for power management. In 2011 arm used them. In 2013 the code they were used in was removed. These events have been wasting memory since then. - Fix sparse warnings There was a few places that sparse warned about trace_events_filter.c where file->filter was referenced directly, but it is annotated with an __rcu tag. Use the helper functions and fix them up to use rcu_dereference() properly. * tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Add rcu annotation around file->filter accesses tracing: PM: Remove unused clock events ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set() tracing: Fix regression of filter waiting a long time on RCU synchronization |
||
|
Steven Rostedt
|
de6fdc076d |
tracing: PM: Remove unused clock events
The events clock_enable, clock_disable, and clock_set_rate were added back
in 2010. In 2011 they were used by the arm architecture but removed in
2013. These events add around 7K of memory which was wasted for the last 12
years.
Remove them.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kajetan Puchalski <kajetan.puchalski@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/20250605162106.1a459dad@gandalf.local.home
Fixes:
|
||
|
Linus Torvalds
|
5abc7438f1 |
NFS Clent Updates for Linux 6.16
New Features:
* Implement the Sunrpc rfc2203 rpcsec_gss sequence number cache
* Add support for FALLOC_FL_ZERO_RANGE on NFS v4.2
* Add a localio sysfs attribute
Stable Fixes:
* Fix double-unlock bug in nfs_return_empty_folio()
* Don't check for OPEN feature support in v4.1
* Always probe for LOCALIO support asynchronously
* Prevent hang on NFS mounts with xprtsec=[m]tls
Other Bugfixes:
* xattr handlers should check for absent nfs filehandles
* Fix setattr caching of TIME_[MODIFY|ACCESS]_SET when timestamps are delegated
* Fix listxattr to return selinux security labels
* Connect to NFSv3 DS using TLS if MDS connection uses TLS
* Clear SB_RDONLY before getting a superblock, and ignore when remounting
* Fix incorrect handling of NFS error codes in nfs4_do_mkdir()
* Various nfs_localio fixes from Neil Brown that include fixing an
rcu compilation error found by older gcc versions.
* Update stats on flexfiles pNFS DSes when receiving NFS4ERR_DELAY
Cleanups:
* Add a refcount tracker for struct net in the nfs_client
* Allow FREE_STATEID to clean up delegations
* Always set NLINK even if the server doesn't support it
* Cleanups to the NFS folio writeback code
* Remove dead code from xs_tcp_tls_setup_socket()
-----BEGIN PGP SIGNATURE-----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=5DFQ
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.16-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS clent updates from Anna Schumaker:
"New Features:
- Implement the Sunrpc rfc2203 rpcsec_gss sequence number cache
- Add support for FALLOC_FL_ZERO_RANGE on NFS v4.2
- Add a localio sysfs attribute
Stable Fixes:
- Fix double-unlock bug in nfs_return_empty_folio()
- Don't check for OPEN feature support in v4.1
- Always probe for LOCALIO support asynchronously
- Prevent hang on NFS mounts with xprtsec=[m]tls
Other Bugfixes:
- xattr handlers should check for absent nfs filehandles
- Fix setattr caching of TIME_[MODIFY|ACCESS]_SET when timestamps are
delegated
- Fix listxattr to return selinux security labels
- Connect to NFSv3 DS using TLS if MDS connection uses TLS
- Clear SB_RDONLY before getting a superblock, and ignore when
remounting
- Fix incorrect handling of NFS error codes in nfs4_do_mkdir()
- Various nfs_localio fixes from Neil Brown that include fixing an
rcu compilation error found by older gcc versions.
- Update stats on flexfiles pNFS DSes when receiving NFS4ERR_DELAY
Cleanups:
- Add a refcount tracker for struct net in the nfs_client
- Allow FREE_STATEID to clean up delegations
- Always set NLINK even if the server doesn't support it
- Cleanups to the NFS folio writeback code
- Remove dead code from xs_tcp_tls_setup_socket()"
* tag 'nfs-for-6.16-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (30 commits)
flexfiles/pNFS: update stats on NFS4ERR_DELAY for v4.1 DSes
nfs_localio: change nfsd_file_put_local() to take a pointer to __rcu pointer
nfs_localio: protect race between nfs_uuid_put() and nfs_close_local_fh()
nfs_localio: duplicate nfs_close_local_fh()
nfs_localio: simplify interface to nfsd for getting nfsd_file
nfs_localio: always hold nfsd net ref with nfsd_file ref
nfs_localio: use cmpxchg() to install new nfs_file_localio
SUNRPC: Remove dead code from xs_tcp_tls_setup_socket()
SUNRPC: Prevent hang on NFS mount with xprtsec=[m]tls
nfs: fix incorrect handling of large-number NFS errors in nfs4_do_mkdir()
nfs: ignore SB_RDONLY when remounting nfs
nfs: clear SB_RDONLY before getting superblock
NFS: always probe for LOCALIO support asynchronously
pnfs/flexfiles: connect to NFSv3 DS using TLS if MDS connection uses TLS
NFS: add localio to sysfs
nfs: use writeback_iter directly
nfs: refactor nfs_do_writepage
nfs: don't return AOP_WRITEPAGE_ACTIVATE from nfs_do_writepage
nfs: fold nfs_page_async_flush into nfs_do_writepage
NFSv4: Always set NLINK even if the server doesn't support it
...
|
||
|
Linus Torvalds
|
70087d2200 |
tracing fixes:
- Fix UAF in module unload in ftrace when there's a bug in the module If a module is buggy and triggers ftrace_disable which is set when an anomaly is detected, when it gets unloaded it doesn't free the hooks into kallsyms, and when a kallsyms lookup is performed it may access the mod->modname field and crash via UAF. Fix this by still freeing the mod_maps that are attached to kallsyms on module unload regardless if ftrace_disable is set or not. - Do not bother allocating mod_maps for kallsyms if ftrace_disable is set - Remove unused trace events When a trace event or tracepoint is created but not used, it still creates the code and data structures needed for that trace event. This just wastes memory. A patch is being worked on to warn when a trace event is created but not used: https://lore.kernel.org/linux-trace-kernel/20250529130138.544ffec4@gandalf.local.home/ Remove the trace events that are created but not used. This does not remove trace events that are created but are not used due configs not being set. That will be handled later. This only removes events that have no user under any config. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaD9LohQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qvrRAP4xRH01dQ3HkNF3mtKXuHEh8NbTlCEE 8wYyiI8ttjVdGAEAzq5sx2BQN2Of4RLOwYtxJSigZgmJjYYGmobeHISPjwc= =d2Cp -----END PGP SIGNATURE----- Merge tag 'trace-v6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix UAF in module unload in ftrace when there's a bug in the module If a module is buggy and triggers ftrace_disable which is set when an anomaly is detected, when it gets unloaded it doesn't free the hooks into kallsyms, and when a kallsyms lookup is performed it may access the mod->modname field and crash via UAF. Fix this by still freeing the mod_maps that are attached to kallsyms on module unload regardless if ftrace_disable is set or not. - Do not bother allocating mod_maps for kallsyms if ftrace_disable is set - Remove unused trace events When a trace event or tracepoint is created but not used, it still creates the code and data structures needed for that trace event. This just wastes memory. Remove the trace events that are created but not used. This does not remove trace events that are created but are not used due configs not being set. That will be handled later. This only removes events that have no user under any config. * tag 'trace-v6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: fsdax: Remove unused trace events for dax insert mapping genirq/matrix: Remove unused irq_matrix_alloc_reserved tracepoint xdp: Remove unused mem_return_failed event ftrace: Don't allocate ftrace module map if ftrace is disabled ftrace: Fix UAF when lookup kallsym after ftrace disabled |
||
|
Steven Rostedt
|
a4a45a9a72 |
fsdax: Remove unused trace events for dax insert mapping
When the dax_fault_actor() helper was factored out, it removed the calls
to the dax_pmd_insert_mapping and dax_insert_mapping events but never
removed the events themselves. As each event created takes up memory
(roughly 5K each), this is a waste as it is never used.
Remove the unused dax_pmd_insert_mapping and dax_insert_mapping trace
events.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/
Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250529152211.688800c9@gandalf.local.home
Fixes:
|
||
|
Tvrtko Ursulin
|
ecec875a6c |
dma-fence: Add helpers for accessing driver and timeline name
Add some helpers in order to enable preventing dma-fence users accessing the implementation details directly and make the implementation itself use them. This will also enable later adding some asserts to a consolidated location. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://lore.kernel.org/r/20250515095004.28318-4-tvrtko.ursulin@igalia.com |
||
|
Linus Torvalds
|
0fb34422b5 |
vfs-6.16-rc1.netfs
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPUAAKCRCRxhvAZXjc ouMEAQCrviYPG/WMtPTH7nBIbfVQTfNEXt/TvN7u7OjXb+RwRAEAwe9tLy4GrS/t GuvUPWAthbhs77LTvxj6m3Gf49BOVgQ= =6FqN -----END PGP SIGNATURE----- Merge tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull netfs updates from Christian Brauner: - The main API document has been extensively updated/rewritten - Fix an oops in write-retry due to mis-resetting the I/O iterator - Fix the recording of transferred bytes for short DIO reads - Fix a request's work item to not require a reference, thereby avoiding the need to get rid of it in BH/IRQ context - Fix waiting and waking to be consistent about the waitqueue used - Remove NETFS_SREQ_SEEK_DATA_READ, NETFS_INVALID_WRITE, NETFS_ICTX_WRITETHROUGH, NETFS_READ_HOLE_CLEAR, NETFS_RREQ_DONT_UNLOCK_FOLIOS, and NETFS_RREQ_BLOCKED - Reorder structs to eliminate holes - Remove netfs_io_request::ractl - Only provide proc_link field if CONFIG_PROC_FS=y - Remove folio_queue::marks3 - Fix undifferentiation of DIO reads from unbuffered reads * tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: netfs: Fix undifferentiation of DIO reads from unbuffered reads netfs: Fix wait/wake to be consistent about the waitqueue used netfs: Fix the request's work item to not require a ref netfs: Fix setting of transferred bytes with short DIO reads netfs: Fix oops in write-retry from mis-resetting the subreq iterator fs/netfs: remove unused flag NETFS_RREQ_BLOCKED fs/netfs: remove unused flag NETFS_RREQ_DONT_UNLOCK_FOLIOS folio_queue: remove unused field `marks3` fs/netfs: declare field `proc_link` only if CONFIG_PROC_FS=y fs/netfs: remove `netfs_io_request.ractl` fs/netfs: reorder struct fields to eliminate holes fs/netfs: remove unused enum choice NETFS_READ_HOLE_CLEAR fs/netfs: remove unused flag NETFS_ICTX_WRITETHROUGH fs/netfs: remove unused source NETFS_INVALID_WRITE fs/netfs: remove unused flag NETFS_SREQ_SEEK_DATA_READ |
||
|
Steven Rostedt
|
167d7ede00 |
genirq/matrix: Remove unused irq_matrix_alloc_reserved tracepoint
The tracepoint irq_matrix_alloc_reserved was added but never used.
Remove it.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/
Cc: Juergen Gross <jgross@suse.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250529135739.26e5c075@gandalf.local.home
Fixes:
|
||
|
Steven Rostedt
|
e27e43a5cb |
xdp: Remove unused mem_return_failed event
The change to allow page_pool to handle its own page destruction instead
of relying on XDP removed the trace_mem_return_failed() tracepoint caller,
but did not remove the mem_return_failed trace event. As trace events take
up memory when they are created regardless of if they are used or not,
having this unused event around wastes around 5K of memory.
Remove the unused event.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/
Cc: netdev <netdev@vger.kernel.org>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250529160550.1f888b15@gandalf.local.home
Fixes:
|
||
|
Linus Torvalds
|
00c010e130 |
- The 11 patch series "Add folio_mk_pte()" from Matthew Wilcox
simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - The 8 patch series "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - The 3 patch series "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - The 2 patch series "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - The 8 patch series "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - The 6 patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - The 3 patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - The 2 patch series "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - The 3 patch series "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - The 3 patch series "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - The 12 patch series "Always call constructor for kernel page tables" from Kevin Brodsky "ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables". This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - The 9 patch series "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - The 3 patch series "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - The 4 patch series "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - The 6 patch series "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - The 3 patch series "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - The 3 patch series ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - The 7 patch series "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - The 5 patch series "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - The 2 patch series "vmscan: enforce mems_effective during demotion" from Gregory Price "changes reclaim to respect cpuset.mems_effective during demotion when possible". because "presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated." "This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently." - The 2 patch series ""Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - The 3 patch series "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - The 4 patch series "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - The 17 patch series "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - The 7 patch series "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - The 2 patch series "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - The 2 patch series "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - The 4 patch series "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - The 6 patch series "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - The 2 patch series "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - The 8 patch series "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - The 3 patch series "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - The 4 patch series "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - The 6 patch series "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is "yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents." - The 7 patch series "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - The 4 patch series "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDt5qgAKCRDdBJ7gKXxA ju6XAP9nTiSfRz8Cz1n5LJZpFKEGzLpSihCYyR6P3o1L9oe3mwEAlZ5+XAwk2I5x Qqb/UGMEpilyre1PayQqOnct3aSL9Ao= =tYYm -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - "Always call constructor for kernel page tables" from Kevin Brodsky ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables. This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - "vmscan: enforce mems_effective during demotion" from Gregory Price changes reclaim to respect cpuset.mems_effective during demotion when possible. because presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated. This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently. - "Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents. - "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. * tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits) mm: pcp: increase pcp->free_count threshold to trigger free_high mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range() mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page mm/hugetlb: pass folio instead of page to unmap_ref_private() memcg: objcg stock trylock without irq disabling memcg: no stock lock for cpu hot-unplug memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs memcg: make count_memcg_events re-entrant safe against irqs memcg: make mod_memcg_state re-entrant safe against irqs memcg: move preempt disable to callers of memcg_rstat_updated memcg: memcg_rstat_updated re-entrant safe against irqs mm: khugepaged: decouple SHMEM and file folios' collapse selftests/eventfd: correct test name and improve messages alloc_tag: check mem_profiling_support in alloc_tag_init Docs/damon: update titles and brief introductions to explain DAMOS selftests/damon/_damon_sysfs: read tried regions directories in order mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject() mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat() mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs ... |
||
|
Linus Torvalds
|
d8441523f2 |
f2fs-for-6.16-rc1
In this round, Matthew converted most of page operations to using folio. Beyond
the work, we've applied some performance tunings such as GC and linear lookup,
in addition to enhancing fault injection and sanity checks.
Enhancement:
- large number of folio conversions
- add a control to turn on/off the linear lookup for performance
- tune GC logics for zoned block device
- improve fault injection and sanity checks
Bug fix:
- handle error cases of memory donation
- fix to correct check conditions in f2fs_cross_rename
- fix to skip f2fs_balance_fs() if checkpoint is disabled
- don't over-report free space or inodes in statvfs
- prevent the current section from being selected as a victim during GC
- fix to calculate first_zoned_segno correctly
- fix to avoid inconsistence in between SIT and SSA for zoned block device
As usual, there are several debugging patches and clean-ups as well.
-----BEGIN PGP SIGNATURE-----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=G8sl
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, Matthew converted most of page operations to using
folio. Beyond the work, we've applied some performance tunings such as
GC and linear lookup, in addition to enhancing fault injection and
sanity checks.
Enhancements:
- large number of folio conversions
- add a control to turn on/off the linear lookup for performance
- tune GC logics for zoned block device
- improve fault injection and sanity checks
Bug fixes:
- handle error cases of memory donation
- fix to correct check conditions in f2fs_cross_rename
- fix to skip f2fs_balance_fs() if checkpoint is disabled
- don't over-report free space or inodes in statvfs
- prevent the current section from being selected as a victim during GC
- fix to calculate first_zoned_segno correctly
- fix to avoid inconsistence between SIT and SSA for zoned block device
As usual, there are several debugging patches and clean-ups as well"
* tag 'f2fs-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (195 commits)
f2fs: fix to correct check conditions in f2fs_cross_rename
f2fs: use d_inode(dentry) cleanup dentry->d_inode
f2fs: fix to skip f2fs_balance_fs() if checkpoint is disabled
f2fs: clean up to check bi_status w/ BLK_STS_OK
f2fs: introduce is_{meta,node}_folio
f2fs: add ckpt_valid_blocks to the section entry
f2fs: add a method for calculating the remaining blocks in the current segment in LFS mode.
f2fs: introduce FAULT_VMALLOC
f2fs: use vmalloc instead of kvmalloc in .init_{,de}compress_ctx
f2fs: add f2fs_bug_on() in f2fs_quota_read()
f2fs: add f2fs_bug_on() to detect potential bug
f2fs: remove unused sbi argument from checksum functions
f2fs: fix 32-bits hexademical number in fault injection doc
f2fs: don't over-report free space or inodes in statvfs
f2fs: return bool from __write_node_folio
f2fs: simplify return value handling in f2fs_fsync_node_pages
f2fs: always unlock the page in f2fs_write_single_data_page
f2fs: remove wbc->for_reclaim handling
f2fs: return bool from __f2fs_write_meta_folio
f2fs: fix to return correct error number in f2fs_sync_node_pages()
...
|
||
|
Linus Torvalds
|
ae5ec8adb8 |
tsm for 6.16
- Add a general sysfs scheme for publishing "Measurement" values
provided by the architecture's TEE Security Manager. Use it to publish
TDX "Runtime Measurement Registers" ("RTMRs") that either maintain a
hash of stored values (similar to a TPM PCR) or provide statically
provisioned data. These measurements are validated by a relying party.
- Reorganize the drivers/virt/coco/ directory for "host" and "guest"
shared infrastructure.
- Fix a configfs-tsm-report unregister bug
- With CONFIG_TSM_MEASUREMENTS joining CONFIG_TSM_REPORTS and in
anticipation of more shared "TSM" infrastructure arriving, rename the
maintainer entry to "TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE".
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCaDj38gAKCRDfioYZHlFs
Z3EKAQC2K7RgoufBlLv4C79W8IGiUirKKQvtY9aiC7s/W8R4UwEApwV5gXQx2ImN
cEIIkAkVI2h9wJ9LHxyr3R5XfZPBGgA=
=2fTp
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull trusted security manager (TSM) updates from Dan Williams:
- Add a general sysfs scheme for publishing "Measurement" values
provided by the architecture's TEE Security Manager. Use it to
publish TDX "Runtime Measurement Registers" ("RTMRs") that either
maintain a hash of stored values (similar to a TPM PCR) or provide
statically provisioned data. These measurements are validated by a
relying party.
- Reorganize the drivers/virt/coco/ directory for "host" and "guest"
shared infrastructure.
- Fix a configfs-tsm-report unregister bug
- With CONFIG_TSM_MEASUREMENTS joining CONFIG_TSM_REPORTS and in
anticipation of more shared "TSM" infrastructure arriving, rename the
maintainer entry to "TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE".
* tag 'tsm-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
tsm-mr: Fix init breakage after bin_attrs constification by scoping non-const pointers to init phase
sample/tsm-mr: Fix missing static for sample_report
virt: tdx-guest: Transition to scoped_cond_guard for mutex operations
virt: tdx-guest: Refactor and streamline TDREPORT generation
virt: tdx-guest: Expose TDX MRs as sysfs attributes
x86/tdx: tdx_mcall_get_report0: Return -EBUSY on TDCALL_OPERAND_BUSY error
x86/tdx: Add tdx_mcall_extend_rtmr() interface
tsm-mr: Add tsm-mr sample code
tsm-mr: Add TVM Measurement Register support
configfs-tsm-report: Fix NULL dereference of tsm_ops
coco/guest: Move shared guest CC infrastructure to drivers/virt/coco/guest/
configfs-tsm: Namespace TSM report symbols
|
||
|
Linus Torvalds
|
b78f1293f9 |
tracing updates for v6.16:
- Have module addresses get updated in the persistent ring buffer The addresses of the modules from the previous boot are saved in the persistent ring buffer. If the same modules are loaded and an address is in the old buffer points to an address that was both saved in the persistent ring buffer and is loaded in memory, shift the address to point to the address that is loaded in memory in the trace event. - Print function names for irqs off and preempt off callsites When ignoring the print fmt of a trace event and just printing the fields directly, have the fields for preempt off and irqs off events still show the function name (via kallsyms) instead of just showing the raw address. - Clean ups of the histogram code The histogram functions saved over 800 bytes on the stack to process events as they come in. Instead, create per-cpu buffers that can hold this information and have a separate location for each context level (thread, softirq, IRQ and NMI). Also add some more comments to the code. - Add "common_comm" field for histograms Add "common_comm" that uses the current->comm as a field in an event histogram and acts like any of the other fields of the event. - Show "subops" in the enabled_functions file When the function graph infrastructure is used, a subsystem has a "subops" that it attaches its callback function to. Instead of the enabled_functions just showing a function calling the function that calls the subops functions, also show the subops functions that will get called for that function too. - Add "copy_trace_marker" option to instances There are cases where an instance is created for tooling to write into, but the old tooling has the top level instance hardcoded into the application. New tools want to consume the data from an instance and not the top level buffer. By adding a copy_trace_marker option, whenever the top instance trace_marker is written into, a copy of it is also written into the instance with this option set. This allows new tools to read what old tools are writing into the top buffer. If this option is cleared by the top instance, then what is written into the trace_marker is not written into the top instance. This is a way to redirect the trace_marker writes into another instance. - Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp() If a tracepoint is created by DECLARE_TRACE() instead of TRACE_EVENT(), then it will not be exposed via tracefs. Currently there's no way to differentiate in the kernel the tracepoint functions between those that are exposed via tracefs or not. A calling convention has been made manually to append a "_tp" prefix for events created by DECLARE_TRACE(). Instead of doing this manually, force it so that all DECLARE_TRACE() events have this notation. - Use __string() for task->comm in some sched events Instead of hardcoding the comm to be TASK_COMM_LEN in some of the scheduler events use __string() which makes it dynamic. Note, if these events are parsed by user space it they may break, and the event may have to be converted back to the hardcoded size. - Have function graph "depth" be unsigned to the user Internally to the kernel, the "depth" field of the function graph event is signed due to -1 being used for end of boundary. What actually gets recorded in the event itself is zero or positive. Reflect this to user space by showing "depth" as unsigned int and be consistent across all events. - Allow an arbitrary long CPU string to osnoise_cpus_write() The filtering of which CPUs to write to can exceed 256 bytes. If a machine has 256 CPUs, and the filter is to filter every other CPU, the write would take a string larger than 256 bytes. Instead of using a fixed size buffer on the stack that is 256 bytes, allocate it to handle what is passed in. - Stop having ftrace check the per-cpu data "disabled" flag The "disabled" flag in the data structure passed to most ftrace functions is checked to know if tracing has been disabled or not. This flag was added back in 2008 before the ring buffer had its own way to disable tracing. The "disable" flag is now not always set when needed, and the ring buffer flag should be used in all locations where the disabled is needed. Since the "disable" flag is redundant and incorrect, stop using it. Fix up some locations that use the "disable" flag to use the ring buffer info. - Use a new tracer_tracing_disable/enable() instead of data->disable flag There's a few cases that set the data->disable flag to stop tracing, but this flag is not consistently used. It is also an on/off switch where if a function set it and calls another function that sets it, the called function may incorrectly enable it. Use a new trace_tracing_disable() and tracer_tracing_enable() that uses a counter and can be nested. These use the ring buffer flags which are always checked making the disabling more consistent. - Save the trace clock in the persistent ring buffer Save what clock was used for tracing in the persistent ring buffer and set it back to that clock after a reboot. - Remove unused reference to a per CPU data pointer in mmiotrace functions - Remove unused buffer_page field from trace_array_cpu structure - Remove more strncpy() instances - Other minor clean ups and fixes -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaDhiqRQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qkheAQDpyRHoXF1AIoEqyahDax8f3vpZQeCH B/mn+YJmU1wuVgEA7AFALov5SHKv4IzoARz68GXtR0jGhP5D8uebUhUqDAQ= =WmFG -----END PGP SIGNATURE----- Merge tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Have module addresses get updated in the persistent ring buffer The addresses of the modules from the previous boot are saved in the persistent ring buffer. If the same modules are loaded and an address is in the old buffer points to an address that was both saved in the persistent ring buffer and is loaded in memory, shift the address to point to the address that is loaded in memory in the trace event. - Print function names for irqs off and preempt off callsites When ignoring the print fmt of a trace event and just printing the fields directly, have the fields for preempt off and irqs off events still show the function name (via kallsyms) instead of just showing the raw address. - Clean ups of the histogram code The histogram functions saved over 800 bytes on the stack to process events as they come in. Instead, create per-cpu buffers that can hold this information and have a separate location for each context level (thread, softirq, IRQ and NMI). Also add some more comments to the code. - Add "common_comm" field for histograms Add "common_comm" that uses the current->comm as a field in an event histogram and acts like any of the other fields of the event. - Show "subops" in the enabled_functions file When the function graph infrastructure is used, a subsystem has a "subops" that it attaches its callback function to. Instead of the enabled_functions just showing a function calling the function that calls the subops functions, also show the subops functions that will get called for that function too. - Add "copy_trace_marker" option to instances There are cases where an instance is created for tooling to write into, but the old tooling has the top level instance hardcoded into the application. New tools want to consume the data from an instance and not the top level buffer. By adding a copy_trace_marker option, whenever the top instance trace_marker is written into, a copy of it is also written into the instance with this option set. This allows new tools to read what old tools are writing into the top buffer. If this option is cleared by the top instance, then what is written into the trace_marker is not written into the top instance. This is a way to redirect the trace_marker writes into another instance. - Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp() If a tracepoint is created by DECLARE_TRACE() instead of TRACE_EVENT(), then it will not be exposed via tracefs. Currently there's no way to differentiate in the kernel the tracepoint functions between those that are exposed via tracefs or not. A calling convention has been made manually to append a "_tp" prefix for events created by DECLARE_TRACE(). Instead of doing this manually, force it so that all DECLARE_TRACE() events have this notation. - Use __string() for task->comm in some sched events Instead of hardcoding the comm to be TASK_COMM_LEN in some of the scheduler events use __string() which makes it dynamic. Note, if these events are parsed by user space it they may break, and the event may have to be converted back to the hardcoded size. - Have function graph "depth" be unsigned to the user Internally to the kernel, the "depth" field of the function graph event is signed due to -1 being used for end of boundary. What actually gets recorded in the event itself is zero or positive. Reflect this to user space by showing "depth" as unsigned int and be consistent across all events. - Allow an arbitrary long CPU string to osnoise_cpus_write() The filtering of which CPUs to write to can exceed 256 bytes. If a machine has 256 CPUs, and the filter is to filter every other CPU, the write would take a string larger than 256 bytes. Instead of using a fixed size buffer on the stack that is 256 bytes, allocate it to handle what is passed in. - Stop having ftrace check the per-cpu data "disabled" flag The "disabled" flag in the data structure passed to most ftrace functions is checked to know if tracing has been disabled or not. This flag was added back in 2008 before the ring buffer had its own way to disable tracing. The "disable" flag is now not always set when needed, and the ring buffer flag should be used in all locations where the disabled is needed. Since the "disable" flag is redundant and incorrect, stop using it. Fix up some locations that use the "disable" flag to use the ring buffer info. - Use a new tracer_tracing_disable/enable() instead of data->disable flag There's a few cases that set the data->disable flag to stop tracing, but this flag is not consistently used. It is also an on/off switch where if a function set it and calls another function that sets it, the called function may incorrectly enable it. Use a new trace_tracing_disable() and tracer_tracing_enable() that uses a counter and can be nested. These use the ring buffer flags which are always checked making the disabling more consistent. - Save the trace clock in the persistent ring buffer Save what clock was used for tracing in the persistent ring buffer and set it back to that clock after a reboot. - Remove unused reference to a per CPU data pointer in mmiotrace functions - Remove unused buffer_page field from trace_array_cpu structure - Remove more strncpy() instances - Other minor clean ups and fixes * tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits) tracing: Fix compilation warning on arm32 tracing: Record trace_clock and recover when reboot tracing/sched: Use __string() instead of fixed lengths for task->comm tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix tracing: Cleanup upper_empty() in pid_list tracing: Allow the top level trace_marker to write into another instances tracing: Add a helper function to handle the dereference arg in verifier tracing: Remove unnecessary "goto out" that simply returns ret is trigger code tracing: Fix error handling in event_trigger_parse() tracing: Rename event_trigger_alloc() to trigger_data_alloc() tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf tracing: Remove unused buffer_page field from trace_array_cpu structure tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer tracing: Convert the per CPU "disabled" counter to local from atomic tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field ring-buffer: Add ring_buffer_record_is_on_cpu() tracing: Do not use per CPU array_buffer.data->disabled for cpumask ftrace: Do not disabled function graph based on "disabled" field tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one() ... |
||
|
Linus Torvalds
|
1b98f357da |
Networking changes for 6.16.
Core
----
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing
again the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter
---------
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools
still use this interface.
- Implement support for wildcard netdevice in netdev basechain
and flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF
---
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols
---------
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the single
flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API
----------
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling
-----------------
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers
----------------------
- OpenVPN virtual driver: offload OpenVPN data channels processing
to the kernel-space, increasing the data transfer throughput WRT
the user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the stearing table handling to reduce significantly
the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=t/Tz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
||
|
Linus Torvalds
|
2c26b68cd5 |
NFSD 6.16 Release Notes
The marquee feature for this release is that the limit on the maximum rsize and wsize has been raised to 4MB. The default remains at 1MB, but risk-seeking administrators now have the ability to try larger I/O sizes with NFS clients that support them. Eventually the default setting will be increased when we have confidence that this change will not have negative impact. With v6.16, NFSD now has its own debugfs file system where we can add experimental features and make them available outside of our development community without impacting production deployments. The first experimental setting added is one that makes all NFS READ operations use vfs_iter_read() instead of the NFSD splice actor. The plan is to eventually retire the splice actor, as that will enable a number of new capabilities such as the use of struct bio_vec from the top to the bottom of the NFSD stack. Jeff Layton contributed a number of observability improvements. The use of dprintk() in a number of high-traffic code paths has been replaced with static trace points. This release sees the continuation of efforts to harden the NFSv4.2 COPY operation. Soon, the restriction on async COPY operations can be lifted. Many thanks to the contributors, reviewers, testers, and bug reporters who participated during the v6.16 development cycle. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmg1yGUACgkQM2qzM29m f5frMA//TJTbSWiM7qBX1GhVMNr1lxQcjU4BPKo0qZfEtwV06F2BB9mWgDU+BIQh AcGfMZUmNWAnhOTOYvwqyW6dnX+1yt8sBsCZ/1ctY30A4JH4AgG5sdZS7BUrlEEr bGDMUCaPnvQ3maeDjMlefe7Xv/rUhj9TVhXmDkt4vf/jCde2JODTB/z8n7WeAxYJ eOvmr/n5z6VI5Q67M7b5/xqofBEaEoq9P5UEgn61ThfeR0bMlrklm/avDCbbNIH8 6n7Z3tjzllK1CAjEmwHalq4LRbMX5FHWzNkyJw+wtviXS18J5vCAvRe+JDoykusu L2bgXT8bBUqy46eO4WKEOJtEqVQhIsRFx/8ku1iTLrpDWlwrR4mHVyObEDkkdlMX EyBQ4svg2OxCXSyy5O8oggzU0TWVJStIjbIEHbJYusWLU7HxxFveBwqwzYHXLtip WKm6N2ANqQi1du+Pc6xmgXo9svA5Vk+DQjljm1Y5up9dhi2K9cvCIHjwFsZ+E0VL XqXJ2YgIQb3oXK7FttzLOiDrpX1OX82sTIbgdcPcfT7lP+ej7uiHMBPmdPwgaZIU EbIp0ThoTkh8/VRMDcWIt+B6SEhmb5vY3Zgz9Lcf2J0PM1fuYJ67L7xGTviFX7Ci DpohiCgceb6PHYeIuarayF86tPJGF8Vb7XvQZej2Ybv8QdxLFg8= =FbeG -----END PGP SIGNATURE----- Merge tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd updates from Chuck Lever: "The marquee feature for this release is that the limit on the maximum rsize and wsize has been raised to 4MB. The default remains at 1MB, but risk-seeking administrators now have the ability to try larger I/O sizes with NFS clients that support them. Eventually the default setting will be increased when we have confidence that this change will not have negative impact. With v6.16, NFSD now has its own debugfs file system where we can add experimental features and make them available outside of our development community without impacting production deployments. The first experimental setting added is one that makes all NFS READ operations use vfs_iter_read() instead of the NFSD splice actor. The plan is to eventually retire the splice actor, as that will enable a number of new capabilities such as the use of struct bio_vec from the top to the bottom of the NFSD stack. Jeff Layton contributed a number of observability improvements. The use of dprintk() in a number of high-traffic code paths has been replaced with static trace points. This release sees the continuation of efforts to harden the NFSv4.2 COPY operation. Soon, the restriction on async COPY operations can be lifted. Many thanks to the contributors, reviewers, testers, and bug reporters who participated during the v6.16 development cycle" * tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (60 commits) xdrgen: Fix code generated for counted arrays SUNRPC: Bump the maximum payload size for the server NFSD: Add a "default" block size NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro NFSD: Remove NFSD_BUFSIZE sunrpc: Remove the RPCSVC_MAXPAGES macro svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages sunrpc: Adjust size of socket's receive page array dynamically SUNRPC: Remove svc_rqst :: rq_vec SUNRPC: Remove svc_fill_write_vector() NFSD: Use rqstp->rq_bvec in nfsd_iter_write() SUNRPC: Export xdr_buf_to_bvec() NFSD: De-duplicate the svc_fill_write_vector() call sites NFSD: Use rqstp->rq_bvec in nfsd_iter_read() sunrpc: Replace the rq_bvec array with dynamically-allocated memory sunrpc: Replace the rq_pages array with dynamically-allocated memory sunrpc: Remove backchannel check in svc_init_buffer() sunrpc: Add a helper to derive maxpages from sv_max_mesg svcrdma: Reduce the number of rdma_rw contexts per-QP ... |
||
|
Linus Torvalds
|
3b66e6b3c0 |
cgroup: Changes for v6.16
- cgroup rstat shared the tracking tree across all controlers with the rationale being that a cgroup which is using one resource is likely to be using other resources at the same time (ie. if something is allocating memory, it's probably consuming CPU cycles). However, this turned out to not scale very well especially with memcg using rstat for internal operations which made memcg stat read and flush patterns substantially different from other controllers. JP Kobryn split the rstat tree per controller. - cgroup BPF support was hooking into cgroup init/exit paths directly. Convert them to use a notifier chain instead so that other usages can be added easily. The two of the patches which implement this are mislabeled as belonging to sched_ext instead of cgroup. Sorry. - Relatively minor cpuset updates. - Documentation updates. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaDYUmA4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGRhbAP90v8QwUkWEKGQSam8JY3by7PvrW6pV5ot+BGuM 4xu3BAEAjsJ9FdiwYLwKYqG7y59xhhBFOo6GpcP52kPp3znl+QQ= =6MIT -----END PGP SIGNATURE----- Merge tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - cgroup rstat shared the tracking tree across all controllers with the rationale being that a cgroup which is using one resource is likely to be using other resources at the same time (ie. if something is allocating memory, it's probably consuming CPU cycles). However, this turned out to not scale very well especially with memcg using rstat for internal operations which made memcg stat read and flush patterns substantially different from other controllers. JP Kobryn split the rstat tree per controller. - cgroup BPF support was hooking into cgroup init/exit paths directly. Convert them to use a notifier chain instead so that other usages can be added easily. The two of the patches which implement this are mislabeled as belonging to sched_ext instead of cgroup. Sorry. - Relatively minor cpuset updates - Documentation updates * tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits) sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier sched_ext: Introduce cgroup_lifetime_notifier cgroup: Minor reorganization of cgroup_create() cgroup, docs: cpu controller's interaction with various scheduling policies cgroup, docs: convert space indentation to tab indentation cgroup: avoid per-cpu allocation of size zero rstat cpu locks cgroup, docs: be specific about bandwidth control of rt processes cgroup: document the rstat per-cpu initialization cgroup: helper for checking rstat participation of css cgroup: use subsystem-specific rstat locks to avoid contention cgroup: use separate rstat trees for each subsystem cgroup: compare css to cgroup::self in helper for distingushing css cgroup: warn on rstat usage by early init subsystems cgroup/cpuset: drop useless cpumask_empty() in compute_effective_exclusive_cpumask() cgroup/rstat: Improve cgroup_rstat_push_children() documentation cgroup: fix goto ordering in cgroup_init() cgroup: fix pointer check in css_rstat_init() cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs cgroup/cpuset: Fix obsolete comment in cpuset_css_offline() cgroup/cpuset: Always use cpu_active_mask ... |
||
|
Linus Torvalds
|
0aee061726 |
Move the x86 page fault tracepoints to generic code, because
other architectures would like to make use of them as well. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmgy+RARHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jTHA//eIBOFKJdxmhpJ95kzA0tRXue+FUSTAX+ j9rMZOJpR9hnVkr0pBxH8bU42lji4+6b2vujMHaT59n5i2kH5tPFHW1xfEnpbVNw thSRsFxrUKsNnKPBju0vK9WQs9e1cn2ZvVBbh2SHrATKQrcTCmJroEERZDX0cdnn VrPeGoc7UUAjxE23c3vnZOzAJDapIc9zPAdfVGRa7xHqlq5grryG+SfHFzT/fd08 5Qwu8TN37jo1HU5v2I4RYIh4Alc1lXtWTfJAc0bks0Cpryu+Et9+N2XANu/VatVw cve/Ubwdou9m0QxQtUTULttEbMSBB8Ylc7DJ1PdGkhULxNM8cCb+Yx9C8Gk0+8Rf SP8/ZSVK8EE+3ETP+J8r8VXoXrNgTPSjMeI1s4rZD/b9QpRKE4g/Khu+R9UA8JBV yuYdy2xkeRbfFVzoGDSVnZItk18MuAoq4hSNqgAxl9/S33HWG84KHQAnjzixCqb4 9Ai7n3/FBEe1edLJXKoqWK96mTa5P/vpGjMnL8wQ0rAnSYI+V2OSwPpZ9HHviw3g qYYMqsmiU6ChbfcUnuub/YwdJFdRieVSOa7wh3H6mfKAuakpS0At8fIyD5mBtFtA /qeSD9INII/guT1gdTgqGsirXeObbmNpC+HJjz8hRvsoP6hdoT2L/UZsUH89LcDl qd8MKeV1Kew= =xi0h -----END PGP SIGNATURE----- Merge tag 'x86-debug-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 debug updates from Ingo Molnar: "Move the x86 page fault tracepoints to generic code, because other architectures would like to make use of them as well" * tag 'x86-debug-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tracing, x86/mm: Move page fault tracepoints to generic x86/tracing, x86/mm: Remove redundant trace_pagefault_key |
||
|
Linus Torvalds
|
eaed94d1f6 |
Scheduler updates for v6.16:
Core & fair scheduler changes:
- Tweak wait_task_inactive() to force dequeue sched_delayed tasks
(John Stultz)
- Adhere to place_entity() constraints (Peter Zijlstra)
- Allow decaying util_est when util_avg > CPU capacity (Pierre Gondois)
- Fix up wake_up_sync() vs DELAYED_DEQUEUE (Xuewen Yan)
Energy management:
- Introduce sched_update_asym_prefer_cpu() (K Prateek Nayak)
- cpufreq/amd-pstate: Update asym_prefer_cpu when core rankings change
(K Prateek Nayak)
- Align uclamp and util_est and call before freq update (Xuewen Yan)
CPU isolation:
- Make use of more than one housekeeping CPU (Phil Auld)
RT scheduler:
- Fix race in push_rt_task() (Harshit Agarwal)
- Add kernel cmdline option for rt_group_sched (Michal Koutný)
Scheduler topology support:
- Improve topology_span_sane speed (Steve Wahl)
Scheduler debugging:
- Move and extend the sched_process_exit() tracepoint (Andrii Nakryiko)
- Add RT_GROUP WARN checks for non-root task_groups (Michal Koutný)
- Fix trace_sched_switch(.prev_state) (Peter Zijlstra)
- Untangle cond_resched() and live-patching (Peter Zijlstra)
Fixes and cleanups:
- Misc fixes and cleanups (K Prateek Nayak, Michal Koutný,
Peter Zijlstra, Xuewen Yan)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=s/ra
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Tweak wait_task_inactive() to force dequeue sched_delayed tasks
(John Stultz)
- Adhere to place_entity() constraints (Peter Zijlstra)
- Allow decaying util_est when util_avg > CPU capacity (Pierre
Gondois)
- Fix up wake_up_sync() vs DELAYED_DEQUEUE (Xuewen Yan)
Energy management:
- Introduce sched_update_asym_prefer_cpu() (K Prateek Nayak)
- cpufreq/amd-pstate: Update asym_prefer_cpu when core rankings
change (K Prateek Nayak)
- Align uclamp and util_est and call before freq update (Xuewen Yan)
CPU isolation:
- Make use of more than one housekeeping CPU (Phil Auld)
RT scheduler:
- Fix race in push_rt_task() (Harshit Agarwal)
- Add kernel cmdline option for rt_group_sched (Michal Koutný)
Scheduler topology support:
- Improve topology_span_sane speed (Steve Wahl)
Scheduler debugging:
- Move and extend the sched_process_exit() tracepoint (Andrii
Nakryiko)
- Add RT_GROUP WARN checks for non-root task_groups (Michal Koutný)
- Fix trace_sched_switch(.prev_state) (Peter Zijlstra)
- Untangle cond_resched() and live-patching (Peter Zijlstra)
Fixes and cleanups:
- Misc fixes and cleanups (K Prateek Nayak, Michal Koutný, Peter
Zijlstra, Xuewen Yan)"
* tag 'sched-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
sched/uclamp: Align uclamp and util_est and call before freq update
sched/util_est: Simplify condition for util_est_{en,de}queue()
sched/fair: Fixup wake_up_sync() vs DELAYED_DEQUEUE
sched,livepatch: Untangle cond_resched() and live-patching
sched/core: Tweak wait_task_inactive() to force dequeue sched_delayed tasks
sched/fair: Adhere to place_entity() constraints
sched/debug: Print the local group's asym_prefer_cpu
cpufreq/amd-pstate: Update asym_prefer_cpu when core rankings change
sched/topology: Introduce sched_update_asym_prefer_cpu()
sched/fair: Use READ_ONCE() to read sg->asym_prefer_cpu
sched/isolation: Make use of more than one housekeeping cpu
sched/rt: Fix race in push_rt_task
sched: Add annotations to RT_GROUP_SCHED fields
sched: Add RT_GROUP WARN checks for non-root task_groups
sched: Do not construct nor expose RT_GROUP_SCHED structures if disabled
sched: Bypass bandwitdh checks with runtime disabled RT_GROUP_SCHED
sched: Skip non-root task_groups with disabled RT_GROUP_SCHED
sched: Add commadline option for RT_GROUP_SCHED toggling
sched: Always initialize rt_rq's task_group
sched: Remove unneeed macro wrap
...
|
||
|
Linus Torvalds
|
79b98edf91 |
Changes since last update:
- Add a `fsoffset` mount option to specify the filesystem offset;
- Support Intel QAT accelerators to boost up the DEFLATE algorithm;
- Initialize per-CPU workers and CPU hotplug hooks lazily to avoid
unnecessary overhead when EROFS is not mounted;
- Fix file handle encoding for 64-bit NIDs;
- Minor cleanups.
-----BEGIN PGP SIGNATURE-----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=+2IX
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, Intel QAT hardware accelerators are supported to
improve DEFLATE decompression performance. I've tested it with the
enwik9 dataset of 1 MiB pclusters on our Intel Sapphire Rapids
bare-metal server and a PL0 ESSD, and the sequential read performance
even surpasses LZ4 software decompression on this setup.
In addition, a `fsoffset` mount option is introduced for file-backed
mounts to specify the filesystem offset in order to adapt customized
container formats.
And other improvements and minor cleanups. Summary:
- Add a `fsoffset` mount option to specify the filesystem offset
- Support Intel QAT accelerators to boost up the DEFLATE algorithm
- Initialize per-CPU workers and CPU hotplug hooks lazily to avoid
unnecessary overhead when EROFS is not mounted
- Fix file handle encoding for 64-bit NIDs
- Minor cleanups"
* tag 'erofs-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: support DEFLATE decompression by using Intel QAT
erofs: clean up erofs_{init,exit}_sysfs()
erofs: add 'fsoffset' mount option to specify filesystem offset
erofs: lazily initialize per-CPU workers and CPU hotplug hooks
erofs: refine readahead tracepoint
erofs: avoid using multiple devices with different type
erofs: fix file handle encoding for 64-bit NIDs
|
||
|
Linus Torvalds
|
5e82ed5ca4 |
for-6.16-tag
-----BEGIN PGP SIGNATURE-----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=bDOD
-----END PGP SIGNATURE-----
Merge tag 'for-6.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Apart from numerous cleanups, there are some performance improvements
and one minor mount option update. There's one more radix-tree
conversion (one remaining), and continued work towards enabling large
folios (almost finished).
Performance:
- extent buffer conversion to xarray gains throughput and runtime
improvements on metadata heavy operations doing writeback (sample
test shows +50% throughput, -33% runtime)
- extent io tree cleanups lead to performance improvements by
avoiding unnecessary searches or repeated searches
- more efficient extent unpinning when committing transaction
(estimated run time improvement 3-5%)
User visible changes:
- remove standalone mount option 'nologreplay', deprecated in 5.9,
replacement is 'rescue=nologreplay'
- in scrub, update reporting, add back device stats message after
detected errors (accidentally removed during recent refactoring)
Core:
- convert extent buffer radix tree to xarray
- in subpage mode, move block perfect compression out of experimental
build
- in zoned mode, introduce sub block groups to allow managing special
block groups, like the one for relocation or tree-log, to handle
some corner cases of ENOSPC
- in scrub, simplify bitmaps for block tracking status
- continued preparations for large folios:
- remove assertions for folio order 0
- add support where missing: compression, buffered write, defrag,
hole punching, subpage, send
- fix fsync of files with no hard links not persisting deletion
- reject tree blocks which are not nodesize aligned, a precaution
from 4.9 times
- move transaction abort calls closer to the error sites
- remove usage of some struct bio_vec internals
- simplifications in extent map
- extent IO cleanups and optimizations
- error handling improvements
- enhanced ASSERT() macro with optional format strings
- cleanups:
- remove unused code
- naming unifications, dropped __, added prefix
- merge similar functions
- use common helpers for various data structures"
* tag 'for-6.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (198 commits)
btrfs: move misplaced comment of btrfs_path::keep_locks
btrfs: remove standalone "nologreplay" mount option
btrfs: use a single variable to track return value at btrfs_page_mkwrite()
btrfs: don't return VM_FAULT_SIGBUS on failure to set delalloc for mmap write
btrfs: simplify early error checking in btrfs_page_mkwrite()
btrfs: pass true to btrfs_delalloc_release_space() at btrfs_page_mkwrite()
btrfs: fix wrong start offset for delalloc space release during mmap write
btrfs: fix harmless race getting delayed ref head count when running delayed refs
btrfs: log error codes during failures when writing super blocks
btrfs: simplify error return logic when getting folio at prepare_one_folio()
btrfs: return real error from __filemap_get_folio() calls
btrfs: remove superfluous return value check at btrfs_dio_iomap_begin()
btrfs: fix invalid data space release when truncating block in NOCOW mode
btrfs: update Kconfig option descriptions
btrfs: update list of features built under experimental config
btrfs: send: remove btrfs_debug() calls
btrfs: use boolean for delalloc argument to btrfs_free_reserved_extent()
btrfs: use boolean for delalloc argument to btrfs_free_reserved_bytes()
btrfs: fold error checks when allocating ordered extent and update comments
btrfs: check we grabbed inode reference when allocating an ordered extent
...
|
||
|
Linus Torvalds
|
49fffac983 |
for-6.16/io_uring-20250523
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmgwnDgQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpgHZEADA1ym0ihHRjU2kTlXXOdkLLOl+o1RCHUjr KNf6sELGgyDC5FL/hAWdsjonInY4MLbJW0eNHEuuK8iFcn3wSHuHPXhRJXx/4cOs GGVLTd+Jm8ih4UL/GeLrBe3ehW9UUOtz1TCYzho0bdXHQWjruCFTqB5OzPQFMGQW R/lwXVNfjgGno5JhBnsrwz3ZnAfAnJhxqmc0GFHaa/nVF1OREYW/HS75EPFNiFgp Aevilw5QyrA2gDlZ+zCUwaGKAEl32yZCI6LZpI4kMtPK1reEbgFTrzIaCZ/OZCYM DVdBVEeuOmcBYIKbitD/+fcLNXHMrSJSWvUSXR4GuRNVkCTIAcEMKM2bX8VY7gmJ 7ZQIo0EL2mSwmewHIYnvf9w/qrNYR0NyUt2v4U4rA2wj6e5w1EYMriP94wKdBGvD RNxja429N3fg3aBIkdQ6iYSVJRgE7DCo7dnKrEqglZPb32LOiNoOoou9shI5tb25 8X7u0HzbpwKY/XByXZ2IaX7PYK2iFqkJjFYlGehtF97W85LGEvkDFU6fcBdjBO8r umgeE5O+lR+cf68JTJ6P34A7bBg71AXO3ytIuWunG56/0yu/FHDCjhBWE5ZjEhGR u2YhAGPRDQsJlSlxx8TXoKyYWP55NqdeyxYrmku/fZLn5WNVXOFeRlUDAZsF7mU7 nuiOt9j4WA== =k8SF -----END PGP SIGNATURE----- Merge tag 'for-6.16/io_uring-20250523' of git://git.kernel.dk/linux Pull io_uring updates from Jens Axboe: - Avoid indirect function calls in io-wq for executing and freeing work. The design of io-wq is such that it can be a generic mechanism, but as it's just used by io_uring now, may as well avoid these indirect calls - Clean up registered buffers for networking - Add support for IORING_OP_PIPE. Pretty straight forward, allows creating pipes with io_uring, particularly useful for having these be instantiated as direct descriptors - Clean up the coalescing support fore registered buffers - Add support for multiple interface queues for zero-copy rx networking. As this feature was merged for 6.15 it supported just a single ifq per ring - Clean up the eventfd support - Add dma-buf support to zero-copy rx - Clean up and improving the request draining support - Clean up provided buffer support, most notably with an eye toward making the legacy support less intrusive - Minor fdinfo cleanups, dropping support for dumping what credentials are registered - Improve support for overflow CQE handling, getting rid of GFP_ATOMIC for allocating overflow entries where possible - Improve detection of cases where io-wq doesn't need to spawn a new worker unnecessarily - Various little cleanups * tag 'for-6.16/io_uring-20250523' of git://git.kernel.dk/linux: (59 commits) io_uring/cmd: warn on reg buf imports by ineligible cmds io_uring/io-wq: only create a new worker if it can make progress io_uring/io-wq: ignore non-busy worker going to sleep io_uring/io-wq: move hash helpers to the top trace/io_uring: fix io_uring_local_work_run ctx documentation io_uring: finish IOU_OK -> IOU_COMPLETE transition io_uring: add new helpers for posting overflows io_uring: pass in struct io_big_cqe to io_alloc_ocqe() io_uring: make io_alloc_ocqe() take a struct io_cqe pointer io_uring: split alloc and add of overflow io_uring: open code io_req_cqe_overflow() io_uring/fdinfo: get rid of dumping credentials io_uring/fdinfo: only compile if CONFIG_PROC_FS is set io_uring/kbuf: unify legacy buf provision and removal io_uring/kbuf: refactor __io_remove_buffers io_uring/kbuf: don't compute size twice on prep io_uring/kbuf: drop extra vars in io_register_pbuf_ring io_uring/kbuf: use mem_is_zero() io_uring/kbuf: account ring io_buffer_list memory io_uring: drain based on allocates reqs ... |
||
|
Linus Torvalds
|
6f59de9bc0 |
for-6.16/block-20250523
-----BEGIN PGP SIGNATURE-----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=1PNK
-----END PGP SIGNATURE-----
Merge tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
|
||
|
Ritesh Harjani (IBM)
|
927244f6ef |
traceevent/block: Add REQ_ATOMIC flag to block trace events
Filesystems like XFS can implement atomic write I/O using either REQ_ATOMIC flag set in the bio or via CoW operation. It will be useful if we have a flag in trace events to distinguish between the two. This patch adds char 'U' (Untorn writes) to rwbs field of the trace events if REQ_ATOMIC flag is set in the bio. <W/ REQ_ATOMIC> ================= xfs_io-4238 [009] ..... 4148.126843: block_rq_issue: 259,0 WFSU 16384 () 768 + 32 none,0,0 [xfs_io] <idle>-0 [009] d.h1. 4148.129864: block_rq_complete: 259,0 WFSU () 768 + 32 none,0,0 [0] <W/O REQ_ATOMIC> =============== xfs_io-4237 [010] ..... 4143.325616: block_rq_issue: 259,0 WS 16384 () 768 + 32 none,0,0 [xfs_io] <idle>-0 [010] d.H1. 4143.329138: block_rq_complete: 259,0 WS () 768 + 32 none,0,0 [0] Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Link: https://lore.kernel.org/r/44317cb2ec4588f6a2c1501a96684e6a1196e8ba.1747921498.git.ritesh.list@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
David Howells
|
db26d62d79
|
netfs: Fix undifferentiation of DIO reads from unbuffered reads
On cifs, "DIO reads" (specified by O_DIRECT) need to be differentiated from
"unbuffered reads" (specified by cache=none in the mount parameters). The
difference is flagged in the protocol and the server may behave
differently: Windows Server will, for example, mandate that DIO reads are
block aligned.
Fix this by adding a NETFS_UNBUFFERED_READ to differentiate this from
NETFS_DIO_READ, parallelling the write differentiation that already exists.
cifs will then do the right thing.
Fixes:
|
||
|
David Hildenbrand
|
cba4dbeb7b |
mm: remove VM_PAT
It's unused, so let's remove it. Link: https://lkml.kernel.org/r/20250512123424.637989-7-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> [x86 bits] Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Airlie <airlied@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jann Horn <jannh@google.com> Cc: Jonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Caleb Sander Mateos
|
28be240c76 |
trace/io_uring: fix io_uring_local_work_run ctx documentation
The comment for the tracepoint io_uring_local_work_run refers to a field "tctx" and a type "io_uring_ctx", neither of which exist. "tctx" looks to mean "ctx" and "io_uring_ctx" should be "io_ring_ctx". Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Link: https://lore.kernel.org/r/20250522150451.2385652-1-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Christian Brauner
|
5fddfbc0cb
|
Merge patch series "netfs: Miscellaneous fixes"
David Howells <dhowells@redhat.com> says:
Here are some miscellaneous fixes and changes for netfslib, if you could
pull them:
(1) Fix an oops in write-retry due to mis-resetting the I/O iterator.
(2) Fix the recording of transferred bytes for short DIO reads.
(3) Fix a request's work item to not require a reference, thereby avoiding
the need to get rid of it in BH/IRQ context.
(4) Fix waiting and waking to be consistent about the waitqueue used.
* patches from https://lore.kernel.org/20250519090707.2848510-1-dhowells@redhat.com:
netfs: Fix wait/wake to be consistent about the waitqueue used
netfs: Fix the request's work item to not require a ref
netfs: Fix setting of transferred bytes with short DIO reads
netfs: Fix oops in write-retry from mis-resetting the subreq iterator
Link: https://lore.kernel.org/20250519090707.2848510-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
David Howells
|
20d72b00ca
|
netfs: Fix the request's work item to not require a ref
When the netfs_io_request struct's work item is queued, it must be supplied
with a ref to the work item struct to prevent it being deallocated whilst
on the queue or whilst it is being processed. This is tricky to manage as
we have to get a ref before we try and queue it and then we may find it's
already queued and is thus already holding a ref - in which case we have to
try and get rid of the ref again.
The problem comes if we're in BH or IRQ context and need to drop the ref:
if netfs_put_request() reduces the count to 0, we have to do the cleanup -
but the cleanup may need to wait.
Fix this by adding a new work item to the request, ->cleanup_work, and
dispatching that when the refcount hits zero. That can then synchronously
cancel any outstanding work on the main work item before doing the cleanup.
Adding a new work item also deals with another problem upstream where it's
sometimes changing the work func in the put function and requeuing it -
which has occasionally in the past caused the cleanup to happen
incorrectly.
As a bonus, this allows us to get rid of the 'was_async' parameter from a
bunch of functions. This indicated whether the put function might not be
permitted to sleep.
Fixes:
|
||
|
Max Kellermann
|
9cd78ca04f
|
fs/netfs: remove unused source NETFS_INVALID_WRITE
This enum choice was added by commit |
||
|
JP Kobryn
|
748922dcfa |
cgroup: use subsystem-specific rstat locks to avoid contention
It is possible to eliminate contention between subsystems when updating/flushing stats by using subsystem-specific locks. Let the existing rstat locks be dedicated to the cgroup base stats and rename them to reflect that. Add similar locks to the cgroup_subsys struct for use with individual subsystems. Lock initialization is done in the new function ss_rstat_init(ss) which replaces cgroup_rstat_boot(void). If NULL is passed to this function, the global base stat locks will be initialized. Otherwise, the subsystem locks will be initialized. Change the existing lock helper functions to accept a reference to a css. Then within these functions, conditionally select the appropriate locks based on the subsystem affiliation of the given css. Add helper functions for this selection routine to avoid repeated code. Signed-off-by: JP Kobryn <inwardvessel@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Nikhil Jha
|
08d6ee6d8a |
sunrpc: implement rfc2203 rpcsec_gss seqnum cache
This implements a sequence number cache of the last three (right now hardcoded) sent sequence numbers for a given XID, as suggested by the RFC. From RFC2203 5.3.3.1: "Note that the sequence number algorithm requires that the client increment the sequence number even if it is retrying a request with the same RPC transaction identifier. It is not infrequent for clients to get into a situation where they send two or more attempts and a slow server sends the reply for the first attempt. With RPCSEC_GSS, each request and reply will have a unique sequence number. If the client wishes to improve turn around time on the RPC call, it can cache the RPCSEC_GSS sequence number of each request it sends. Then when it receives a response with a matching RPC transaction identifier, it can compute the checksum of each sequence number in the cache to try to match the checksum in the reply's verifier." Signed-off-by: Nikhil Jha <njha@janestreet.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> |
||
|
Nam Cao
|
06aa9378df |
x86/tracing, x86/mm: Move page fault tracepoints to generic
Page fault tracepoints are interesting for other architectures as well. Move them to be generic. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gabriele Monaco <gmonaco@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-trace-kernel@vger.kernel.org Link: https://lore.kernel.org/r/89c2f284adf9b4c933f0e65811c50cef900a5a95.1747046848.git.namcao@linutronix.de |
||
|
Gao Xiang
|
4eb56b0761 |
erofs: refine readahead tracepoint
- trace_erofs_readpages => trace_erofs_readahead; - Rename a redundant statement `nrpages = readahead_count(rac);`; - Move the tracepoint to the beginning of z_erofs_readahead(). Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Hongbo Li <lihongbo22@huawei.com> Link: https://lore.kernel.org/r/20250514120820.2739288-1-hsiangkao@linux.alibaba.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> |
||
|
Eric Dumazet
|
c1269d3d12 |
tcp: add tcp_rcvbuf_grow() tracepoint
Provide a new tracepoint to better understand
tcp_rcv_space_adjust() (currently broken) behavior.
Call it only when tcp_rcv_space_adjust() has a chance
to make a change.
I chose to leave trace_tcp_rcv_space_adjust() as is,
because commit
|
||
|
Filipe Manana
|
cff6df108b |
btrfs: tracepoints: remove no longer used tracepoints for eb locking
There are several tracepoints for extent buffer locks that are not used
anymore:
* btrfs_tree_read_unlock_blocking
* btrfs_set_lock_blocking_read
* btrfs_set_lock_blocking_write
* btrfs_tree_read_lock_atomic
These stopped being used after we switched extent buffer locks from a
custom implementation to rw semaphores in commit
|
||
|
Filipe Manana
|
81eb6ce8b5 |
btrfs: tracepoints: add btrfs prefix to names where it's missing
Most of our tracepoints have the 'btrfs_' prefix in their names but a few of them are missing, making it inconsistent. So add the prefix to the ones that are missing it, creating consistency, making it clear for users these are btrfs tracepoints and eventually avoid name collisions with other tracepoints defined by other kernel subsystems. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
02c340c278 |
btrfs: rename the functions to get inode and fs_info from an extent io tree
These functions are exported so they should have a 'btrfs_' prefix by convention, to make it clear they are btrfs specific and to avoid collisions with functions from elsewhere in the kernel. So add a 'btrfs_' prefix to their name to make it clear they are from btrfs. Also remove the 'const' suffix from extent_io_tree_to_inode_const() since there's no non-const variant anymore and makes the naming consistent with extent_io_tree_to_fs_info() (no 'const' suffix and returns a const pointer). Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
41708a4c23 |
btrfs: add btrfs prefix to trace events for extent state alloc and free
These trace events don't have the 'btrfs_' prefix in their name, unlike the other trace events from extent-io-tree.c. So add the prefix to make them consistent and follow coding style conventions too. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
0f987c099d |
btrfs: tracepoints: use btrfs_root_id() to get the id of a root
Instead of open coding btrfs_root_id() to get the ID of a root, use the helper in the trace points, which also makes the code less verbose. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
5c41f6010e |
btrfs: remove EXTENT_UPTODATE io tree flag
The EXTENT_UPTODATE io tree flag is now used only to mark ranges in the fs_info->excluded_extents as used by super blocks and not available for extent allocation (to prevent adding those ranges as free space in the in memory space caches). As we can use any flag for that purpose, and we are using EXTENT_DIRTY for the pinned extents io tree for example, remove the EXTENT_UPTODATE flag and use instead EXTENT_DIRTY for the excluded extents io tree. Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Steven Rostedt
|
155fd6c3e2 |
tracing/sched: Use __string() instead of fixed lengths for task->comm
The sched_switch and sched_waking events hardcoded the length of the comm it recorded because these events were created before the dynamic strings were implemented. Unfortunately, several other events copied this method. As the size of the comm may change in the future, make the string dynamic. The dynamic string requires a 4 byte meta data to hold the size and offset of the string. The amount stored in the ring buffer will then be the strlen(comm) + 5 (for the \n), and aligned to 4 bytes if there's no other strings. This means that a task comm can have up to 10 characters before it requires another 4 bytes in the ring buffer. Most tasks are usually less than that, so this should not be a problem, and it also allows the name to be extended over the TASK_COMM_LEN [1] Note, sched_switch and the sched_waking trace events still hardcode the length, as there is tooling that still requires that. An effort to update the tooling will be made to allow this to change in the future. [1] https://lore.kernel.org/all/20250507110444.963779-1-bhupesh@igalia.com/ Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Bhupesh <bhupesh@igalia.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juri Lelli <juri.lelli@redhat.com> Link: https://lore.kernel.org/20250507133458.51bafd95@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
ac01fa73f5 |
tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix
Most tracepoints in the kernel are created with TRACE_EVENT(). The TRACE_EVENT() macro (and DECLARE_EVENT_CLASS() and DEFINE_EVENT() where in reality, TRACE_EVENT() is just a helper macro that calls those other two macros), will create not only a tracepoint (the function trace_<event>() used in the kernel), it also exposes the tracepoint to user space along with defining what fields will be saved by that tracepoint. There are a few places that tracepoints are created in the kernel that are not exposed to userspace via tracefs. They can only be accessed from code within the kernel. These tracepoints are created with DEFINE_TRACE() Most of these tracepoints end with "_tp". This is useful as when the developer sees that, they know that the tracepoint is for in-kernel only (meaning it can only be accessed inside the kernel, either directly by the kernel or indirectly via modules and BPF programs) and is not exposed to user space. Instead of making this only a process to add "_tp", enforce it by making the DECLARE_TRACE() append the "_tp" suffix to the tracepoint. This requires adding DECLARE_TRACE_EVENT() macros for the TRACE_EVENT() macro to use that keeps the original name. Link: https://lore.kernel.org/all/20250418083351.20a60e64@gandalf.local.home/ Cc: netdev <netdev@vger.kernel.org> Cc: Jiri Olsa <olsajiri@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: David Ahern <dsahern@kernel.org> Cc: Juri Lelli <juri.lelli@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Gabriele Monaco <gmonaco@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/20250510163730.092fad5b@gandalf.local.home Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Libo Chen
|
3fc567e4c0 |
sched/numa: add tracepoint that tracks the skipping of numa balancing due to cpuset memory pinning
Unlike sched_skip_vma_numa tracepoint which tracks skipped VMAs, this tracks the task subjected to cpuset.mems pinning and prints out its allowed memory node mask. Link: https://lkml.kernel.org/r/20250424024523.2298272-3-libo.chen@oracle.com Signed-off-by: Libo Chen <libo.chen@oracle.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Chen Yu <yu.c.chen@intel.com> Cc: Chris Hyser <chris.hyser@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com> Cc: Mel Gorman <mgorman <mgorman@suse.de> Cc: Michal Koutný <mkoutny@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Raghavendra K T <raghavendra.kt@amd.com> Cc: Srikanth Aithal <sraithal@amd.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Fan Ni
|
50dbe53129 |
khugepaged: pass folio instead of head page to trace events
The trace functions trace_mm_collapse_huge_page_isolate() and trace_mm_khugepaged_scan_pmd() each have a single user, which always passes in the head page of a folio. Refactor both functions to take a folio directly. Link: https://lkml.kernel.org/r/20250425002425.533698-1-nifan.cxl@gmail.com Signed-off-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Nico Pache <npache@redhat.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Yang Shi <yang@os.amperecomputing.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Adam Manzanares <a.manzanares@samsung.com> Cc: Luis Chamberalin <mcgrof@kernel.org> Cc: Mariano Pache <npache@redhat.com> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Jeff Layton
|
adbdd746e8 |
nfsd: add a tracepoint for nfsd_setattr
Turn Sargun's internal kprobe based implementation of this into a normal static tracepoint. Also, remove the dprintk's that got added recently with the fix for zero-length ACLs. Cc: Sargun Dillon <sargun@sargun.me> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
18c64378ad |
sunrpc: add info about xprt queue times to svc_xprt_dequeue tracepoint
I've been looking at a problem where we see increased RPC timeouts in clients when the nfs_layout_flexfiles dataserver_timeo value is tuned very low (6s). This is necessary to ensure quick failover to a different mirror if a server goes down, but it causes a lot more major RPC timeouts. Ultimately, the problem is server-side however. It's sometimes doesn't respond to connection attempts. My theory is that the interrupt handler runs when a connection comes in, the xprt ends up being enqueued, but it takes a significant amount of time for the nfsd thread to pick it up. Currently, the svc_xprt_dequeue tracepoint displays "wakeup-us". This is the time between the wake_up() call, and the thread dequeueing the xprt. If no thread was woken, or the thread ended up picking up a different xprt than intended, then this value won't tell us how long the xprt was waiting. Add a new xpt_qtime field to struct svc_xprt and set it in svc_xprt_enqueue(). When the dequeue tracepoint fires, also store the time that the xprt sat on the queue in total. Display it as "qtime-us". Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Cedric Xing
|
b9e22b35d4 |
tsm-mr: Add TVM Measurement Register support
Introduce new TSM Measurement helper library (tsm-mr) for TVM guest drivers
to expose MRs (Measurement Registers) as sysfs attributes, with Crypto
Agility support.
Add the following new APIs (see include/linux/tsm-mr.h for details):
- tsm_mr_create_attribute_group(): Take on input a `struct
tsm_measurements` instance, which includes one `struct
tsm_measurement_register` per MR with properties like `TSM_MR_F_READABLE`
and `TSM_MR_F_WRITABLE`, to determine the supported operations and create
the sysfs attributes accordingly. On success, return a `struct
attribute_group` instance that will typically be included by the guest
driver into `miscdevice.groups` before calling misc_register().
- tsm_mr_free_attribute_group(): Free the memory allocated to the attrubute
group returned by tsm_mr_create_attribute_group().
tsm_mr_create_attribute_group() creates one attribute for each MR, with
names following this pattern:
MRNAME[:HASH]
- MRNAME - Placeholder for the MR name, as specified by
`tsm_measurement_register.mr_name`.
- :HASH - Optional suffix indicating the hash algorithm associated with
this MR, as specified by `tsm_measurement_register.mr_hash`.
Support Crypto Agility by allowing multiple definitions of the same MR
(i.e., with the same `mr_name`) with distinct HASH algorithms.
NOTE: Crypto Agility, introduced in TPM 2.0, allows new hash algorithms to
be introduced without breaking compatibility with applications using older
algorithms. CC architectures may face the same challenge in the future,
needing new hashes for security while retaining compatibility with older
hashes, hence the need for Crypto Agility.
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Dionna Amalie Glaze <dionnaglaze@google.com>
[djbw: fixup bin_attr const conflict]
Link: https://patch.msgid.link/20250509020739.882913-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
||
|
Jakub Kicinski
|
6b02fd7799 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.15-rc6). No conflicts. Adjacent changes: net/core/dev.c: |
||
|
Christoph Hellwig
|
402dd9f02c |
f2fs: remove wbc->for_reclaim handling
Since commits |
||
|
Linus Torvalds
|
0d8d44db29 |
for-6.15-rc5-tag
-----BEGIN PGP SIGNATURE-----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=oczg
-----END PGP SIGNATURE-----
Merge tag 'for-6.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- revert device path canonicalization, this does not work as intended
with namespaces and is not reliable in all setups
- fix crash in scrub when checksum tree is not valid, e.g. when mounted
with rescue=ignoredatacsums
- fix crash when tracepoint btrfs_prelim_ref_insert is enabled
- other minor fixups:
- open code folio_index(), meant to be used in MM code
- use matching type for sizeof in compression allocation
* tag 'for-6.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: open code folio_index() in btree_clear_folio_dirty_tag()
Revert "btrfs: canonicalize the device path before adding it"
btrfs: avoid NULL pointer dereference if no valid csum tree
btrfs: handle empty eb->folios in num_extent_folios()
btrfs: correct the order of prelim_ref arguments in btrfs__prelim_ref
btrfs: compression: adjust cb->compressed_folios allocation type
|
||
|
Christoph Hellwig
|
eeadd68e2a |
block: remove bounce buffering support
The block layer bounce buffering support is unused now, remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250505081138.3435992-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Goldwyn Rodrigues
|
bc7e097509 |
btrfs: correct the order of prelim_ref arguments in btrfs__prelim_ref
btrfs_prelim_ref() calls the old and new reference variables in the incorrect order. This causes a NULL pointer dereference because oldref is passed as NULL to trace_btrfs_prelim_ref_insert(). Note, trace_btrfs_prelim_ref_insert() is being called with newref as oldref (and oldref as NULL) on purpose in order to print out the values of newref. To reproduce: echo 1 > /sys/kernel/debug/tracing/events/btrfs/btrfs_prelim_ref_insert/enable Perform some writeback operations. Backtrace: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 115949067 P4D 115949067 PUD 11594a067 PMD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 1188 Comm: fsstress Not tainted 6.15.0-rc2-tester+ #47 PREEMPT(voluntary) 7ca2cef72d5e9c600f0c7718adb6462de8149622 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014 RIP: 0010:trace_event_raw_event_btrfs__prelim_ref+0x72/0x130 Code: e8 43 81 9f ff 48 85 c0 74 78 4d 85 e4 0f 84 8f 00 00 00 49 8b 94 24 c0 06 00 00 48 8b 0a 48 89 48 08 48 8b 52 08 48 89 50 10 <49> 8b 55 18 48 89 50 18 49 8b 55 20 48 89 50 20 41 0f b6 55 28 88 RSP: 0018:ffffce44820077a0 EFLAGS: 00010286 RAX: ffff8c6b403f9014 RBX: ffff8c6b55825730 RCX: 304994edf9cf506b RDX: d8b11eb7f0fdb699 RSI: ffff8c6b403f9010 RDI: ffff8c6b403f9010 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000010 R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8c6b4e8fb000 R13: 0000000000000000 R14: ffffce44820077a8 R15: ffff8c6b4abd1540 FS: 00007f4dc6813740(0000) GS:ffff8c6c1d378000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000010eb42000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> prelim_ref_insert+0x1c1/0x270 find_parent_nodes+0x12a6/0x1ee0 ? __entry_text_end+0x101f06/0x101f09 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 btrfs_is_data_extent_shared+0x167/0x640 ? fiemap_process_hole+0xd0/0x2c0 extent_fiemap+0xa5c/0xbc0 ? __entry_text_end+0x101f05/0x101f09 btrfs_fiemap+0x7e/0xd0 do_vfs_ioctl+0x425/0x9d0 __x64_sys_ioctl+0x75/0xc0 Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Breno Leitao
|
1df4a94544 |
trace: tcp: Add const qualifier to skb parameter in tcp_probe event
Change the tcp_probe tracepoint to accept a const struct sk_buff parameter instead of a non-const one. This improves type safety and better reflects that the skb is not modified within the tracepoint implementation. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250416-tcp_probe-v1-1-1edc3c5a1cb8@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
fba6995798 |
rxrpc: Add more CHALLENGE/RESPONSE packet tracing
Add more tracing for CHALLENGE and RESPONSE packets. Currently, rxrpc only has client-relevant tracepoints (rx_challenge and tx_response), but add the server-side ones too. Further, record the service ID in the rx_challenge tracepoint as well. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250411095303.2316168-14-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
d03539d5c2 |
rxrpc: Display security params in the afs_cb_call tracepoint
Make the afs_cb_call tracepoint display some security parameters to make debugging easier. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250411095303.2316168-12-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
7a7513a308 |
rxrpc: rxgk: Implement connection rekeying
Implement rekeying of connections with the RxGK security class. This involves regenerating the keys with a different key number as part of the input data after a certain amount of time or a certain amount of bytes encrypted. Rekeying may be triggered by either end. The LSW of the key number is inserted into the security-specific field in the RX header, and we try and expand it to 32-bits to make it last longer. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: Chuck Lever <chuck.lever@oracle.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250411095303.2316168-10-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
9d1d2b5934 |
rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)
Implement the basic parts of the yfs-rxgk security class (security index 6) to support GSSAPI-negotiated security. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: Chuck Lever <chuck.lever@oracle.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250411095303.2316168-9-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
5800b1cf3f |
rxrpc: Allow CHALLENGEs to the passed to the app for a RESPONSE
Allow the app to request that CHALLENGEs be passed to it through an out-of-band queue that allows recvmsg() to pick it up so that the app can add data to it with sendmsg(). This will allow the application (AFS or userspace) to interact with the process if it wants to and put values into user-defined fields. This will be used by AFS when talking to a fileserver to supply that fileserver with a crypto key by which callback RPCs can be encrypted (ie. notifications from the fileserver to the client). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250411095303.2316168-5-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Kuniyuki Iwashima
|
2a63dd0edf |
net: Retire DCCP socket.
DCCP was orphaned in 2021 by commit |
||
|
Breno Leitao
|
0f08335ade |
trace: tcp: Add tracepoint for tcp_sendmsg_locked()
Add a tracepoint to monitor TCP send operations, enabling detailed visibility into TCP message transmission. Create a new tracepoint within the tcp_sendmsg_locked function, capturing traditional fields along with size_goal, which indicates the optimal data size for a single TCP segment. Additionally, a reference to the struct sock sk is passed, allowing direct access for BPF programs. The implementation is largely based on David's patch[1] and suggestions. Link: https://lore.kernel.org/all/70168c8f-bf52-4279-b4c4-be64527aa1ac@kernel.org/ [1] Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250408-tcpsendmsg-v3-2-208b87064c28@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Nam Cao
|
244132c4e5 |
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
The function hrtimer_init() doesn't exist anymore. It was replaced by hrtimer_setup(). Thus, rename the hrtimer_init trace event to hrtimer_setup to keep it consistent. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/all/cba84c3d853c5258aa3a262363a6eac08e2c7afc.1738746927.git.namcao@linutronix.de |
||
|
Nam Cao
|
04257da0c9 |
hrtimers: Make callback function pointer private
Make the struct hrtimer::function field private, to prevent users from changing this field in an unsafe way. hrtimer_update_function() should be used if the callback function needs to be changed. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/all/7d0e6e0c5c59a64a9bea940051aac05d750bc0c2.1738746927.git.namcao@linutronix.de |
||
|
Andrii Nakryiko
|
3e816361e9 |
sched/tracepoints: Move and extend the sched_process_exit() tracepoint
It is useful to be able to access current->mm at task exit to, say, record a bunch of VMA information right before the task exits (e.g., for stack symbolization reasons when dealing with short-lived processes that exit in the middle of profiling session). Currently, trace_sched_process_exit() is triggered after exit_mm() which resets current->mm to NULL making this tracepoint unsuitable for inspecting and recording task's mm_struct-related data when tracing process lifetimes. There is a particularly suitable place, though, right after taskstats_exit() is called, but before we do exit_mm() and other exit_*() resource teardowns. taskstats performs a similar kind of accounting that some applications do with BPF, and so co-locating them seems like a good fit. So that's where trace_sched_process_exit() is moved with this patch. Also, existing trace_sched_process_exit() tracepoint is notoriously missing `group_dead` flag that is certainly useful in practice and some of our production applications have to work around this. So plumb `group_dead` through while at it, to have a richer and more complete tracepoint. Note that we can't use sched_process_template anymore, and so we use TRACE_EVENT()-based tracepoint definition. But all the field names and order, as well as assign and output logic remain intact. We just add one extra field at the end in backwards-compatible way. Document the dependency to sched_process_template anyway. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250402180925.90914-1-andrii@kernel.org |
||
|
Linus Torvalds
|
94d471a4f4 |
NFS client updates for Linux 6.15
Highlights include:
Bugfixes:
- 3 Fixes for looping in the NFSv4 state manager delegation code.
- Fix for the NFSv4 state XDR code from Neil Brown.
- Fix a leaked reference in nfs_lock_and_join_requests().
- Fix a use-after-free in the delegation return code.
Features:
- Implemenation of the NFSv4.2 copy offload OFFLOAD_STATUS operation to
allow monitoring of an in-progress copy.
- Add a mount option to force NFSv3/NFSv4 to use READDIRPLUS in a
getdents() call.
- SUNRPC now allows some basic management of an existing RPC client's
connections using sysfs.
- Improvements to the automated teardown of a NFS client when the
container it was initiated from gets killed.
- Improvements to prevent tasks from getting stuck in a killable wait
state after calling exit_signals().
-----BEGIN PGP SIGNATURE-----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=zPX4
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Three fixes for looping in the NFSv4 state manager delegation code
- Fix for the NFSv4 state XDR code (Neil Brown)
- Fix a leaked reference in nfs_lock_and_join_requests()
- Fix a use-after-free in the delegation return code
Features:
- Implement the NFSv4.2 copy offload OFFLOAD_STATUS operation to
allow monitoring of an in-progress copy
- Add a mount option to force NFSv3/NFSv4 to use READDIRPLUS in a
getdents() call
- SUNRPC now allows some basic management of an existing RPC client's
connections using sysfs
- Improvements to the automated teardown of a NFS client when the
container it was initiated from gets killed
- Improvements to prevent tasks from getting stuck in a killable wait
state after calling exit_signals()"
* tag 'nfs-for-6.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (29 commits)
nfs: Add missing release on error in nfs_lock_and_join_requests()
NFSv4: Check for delegation validity in nfs_start_delegation_return_locked()
NFS: Don't allow waiting for exiting tasks
SUNRPC: Don't allow waiting for exiting tasks
NFSv4: Treat ENETUNREACH errors as fatal for state recovery
NFSv4: clp->cl_cons_state < 0 signifies an invalid nfs_client
NFSv4: Further cleanups to shutdown loops
NFS: Shut down the nfs_client only after all the superblocks
SUNRPC: rpc_clnt_set_transport() must not change the autobind setting
SUNRPC: rpcbind should never reset the port to the value '0'
pNFS/flexfiles: Report ENETDOWN as a connection error
pNFS/flexfiles: Treat ENETUNREACH errors as fatal in containers
NFS: Treat ENETUNREACH errors as fatal in containers
NFS: Add a mount option to make ENETUNREACH errors fatal
sunrpc: Add a sysfs file for one-step xprt deletion
sunrpc: Add a sysfs file for adding a new xprt
sunrpc: Add a sysfs files for rpc_clnt information
sunrpc: Add a sysfs attr for xprtsec
NFS: Add implid to sysfs
NFS: Extend rdirplus mount option with "force|none"
...
|
||
|
Linus Torvalds
|
eb0ece1602 |
- The 6 patch series "Enable strict percpu address space checks" from
Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was founf to be incorrect. - The 4 patch series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The 17 patch series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The 5 patch series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The 4 patch series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The 12 patch series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The 2 patch series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The 2 patch series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The 3 patch series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The 3 patch series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The 4 patch series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The 4 patch series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The 4 patch series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The 18 patch series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The 27 patch series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The 19 patch series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The 12 patch series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The 5 patch series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The 8 patch series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The 2 patch series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The 3 patch series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The 3 patch series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The 3 patch series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The 9 patch series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The 5 patch series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The 20 patch series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The 13 patch series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The 13 patch series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The 3 patch series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The 8 patch series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The 2 patch series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The 3 patch series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The 4 patch series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The 3 patch series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The 5 patch series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The 5 patch series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The 4 patch series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The 2 patch series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The 2 patch series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. -----BEGIN PGP SIGNATURE----- iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF Ee93qSSLR1BkNdDw+931Pu0mXfbnBw== =Pn2K -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ... |
||
|
Linus Torvalds
|
744fab2d9f |
tracing updates for v6.15:
- Add option traceoff_after_boot In order to debug kernel boot, it sometimes is helpful to enable tracing via the kernel command line. Unfortunately, by the time the login prompt appears, the trace is overwritten by the init process and other user space start up applications. Adding a "traceoff_after_boot" will disable tracing when the kernel passes control to init which will allow developers to be able to see the traces that occurred during boot. - Clean up the mmflags macros that display the GFP flags in trace events The macros to print the GFP flags for trace events had a bit of duplication. The code was restructured to remove duplication and in the process it also adds some flags that were missed before. - Removed some dead code and scripts/draw_functrace.py draw_functrace.py hasn't worked in years and as nobody complained about it, remove it. - Constify struct event_trigger_ops The event_trigger_ops is just a structure that has function pointers that are assigned when the variables are created. These variables should all be constants. - Other minor clean ups and fixes -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+V9IhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qr4RAP9JhE3n69pGuOVaJTN/LGLr2Axl59n4 KqZSZS1nUM76/gD6AxYpR7nxyxgJ7VjNkLptS9tSjJVdPDxGAl0v3eO04w4= =SU30 -----END PGP SIGNATURE----- Merge tag 'trace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add option traceoff_after_boot In order to debug kernel boot, it sometimes is helpful to enable tracing via the kernel command line. Unfortunately, by the time the login prompt appears, the trace is overwritten by the init process and other user space start up applications. Adding a "traceoff_after_boot" will disable tracing when the kernel passes control to init which will allow developers to be able to see the traces that occurred during boot. - Clean up the mmflags macros that display the GFP flags in trace events The macros to print the GFP flags for trace events had a bit of duplication. The code was restructured to remove duplication and in the process it also adds some flags that were missed before. - Removed some dead code and scripts/draw_functrace.py draw_functrace.py hasn't worked in years and as nobody complained about it, remove it. - Constify struct event_trigger_ops The event_trigger_ops is just a structure that has function pointers that are assigned when the variables are created. These variables should all be constants. - Other minor clean ups and fixes * tag 'trace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Replace strncpy with memcpy for fixed-length substring copy tracing: Fix synth event printk format for str fields tracing: Do not use PERF enums when perf is not defined tracing: Ensure module defining synth event cannot be unloaded while tracing tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER tracing/osnoise: Fix possible recursive locking for cpus_read_lock() tracing: Align synth event print fmt tracing: gfp: vsprintf: Do not print "none" when using %pGg printf format tracepoint: Print the function symbol when tracepoint_debug is set tracing: Constify struct event_trigger_ops scripts/tracing: Remove scripts/tracing/draw_functrace.py tracing: Update MAINTAINERS file to include tracepoint.c tracing/user_events: Slightly simplify user_seq_show() tracing/user_events: Don't use %pK through printk tracing: gfp: Remove duplication of recording GFP flags tracing: Remove orphaned event_trace_printk ring-buffer: Fix typo in comment about header page pointer tracing: Add traceoff_after_boot option |
||
|
Linus Torvalds
|
88221ac0d5 |
Latency tracing changes for v6.15:
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as well as
allows BPF programs to be attached to these locations to extract even more
data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing the
build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the cumulative
model is equivalent to running single components using the same
reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing but
an empty container for other monitors. Controlling the sched monitor
(enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
* sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
* tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
* snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
* scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
* snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
* sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+QhuxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qg62AP9bkeNDbiCuAqjZGddV09Hw26wC3yum
kQoNSebD8G52rQEA9GDjK37xGzYwW/fJokhJVTV39qfub6inAJE5dS6WeQY=
=8Ikv
-----END PGP SIGNATURE-----
Merge tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull latency tracing updates from Steven Rostedt:
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as
well as allows BPF programs to be attached to these locations to
extract even more data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing
the build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the
cumulative model is equivalent to running single components using the
same reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing
but an empty container for other monitors. Controlling the sched
monitor (enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
- sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
- tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
- snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
- scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
- snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
- sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
* tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rv: Allow rv list to filter for container
Documentation/rv: Add docs for the sched monitors
verification/dot2k: Add support for nested monitors
tools/rv: Add support for nested monitors
rv: Add scpd, snep and sncid per-cpu monitors
rv: Add snroc per-task monitor
rv: Add sco and tss per-cpu monitors
rv: Add option for nested monitors and include sched
sched: Add sched tracepoints for RV task model
rv: Add license identifiers to monitor files
tracing: Fix DECLARE_TRACE_CONDITION
trace/osnoise: Add trace events for samples
|
||
|
Linus Torvalds
|
b2e7b0ffa5 |
Changes since last update:
- Support 48-bit block addressing for large images;
- Introduce encoded extents to reduce metadata on larger pclusters;
- Enable unaligned compressed data to improve Zstd compression speed;
- Allow 16-byte volume names again;
- Minor cleanups.
-----BEGIN PGP SIGNATURE-----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=X5xL
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, EROFS 48-bit block addressing is available to support
massive datasets for model training and other large data archive use
cases.
In addition, byte-oriented encoded extents have been supported to
reduce metadata sizes when using large configurations as well as to
improve Zstd compression speed.
There are some bugfixes and cleanups as usual.
Summary:
- Support 48-bit block addressing for large images
- Introduce encoded extents to reduce metadata on larger pclusters
- Enable unaligned compressed data to improve Zstd compression speed
- Allow 16-byte volume names again
- Minor cleanups"
* tag 'erofs-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: enable 48-bit layout support
erofs: support unaligned encoded data
erofs: implement encoded extent metadata
erofs: add encoded extent on-disk definition
erofs: initialize decompression early
erofs: support dot-omitted directories
erofs: implement 48-bit block addressing for unencoded inodes
erofs: add 48-bit block addressing on-disk support
erofs: simplify erofs_{read,fill}_inode()
erofs: get rid of erofs_map_blocks_flatmode()
erofs: move {in,out}pages into struct z_erofs_decompress_req
erofs: clean up header parsing for ztailpacking and fragments
erofs: simplify tail inline pcluster handling
erofs: allow 16-byte volume name again
erofs: get rid of erofs_kmap_type
erofs: use Z_EROFS_LCLUSTER_TYPE_MAX to simplify switches
|
||
|
Linus Torvalds
|
1a9239bb42 |
Networking changes for 6.15.
Core & protocols
----------------
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls).
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked)
in BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream performance
up to 2x.
- Improve performance of contended connect() by 200% by searching
for an available 4-tuple under RCU rather than a spin lock.
Bring an additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles.
There are up to 4 namespace roles but we used to have just 2 netns
pointer arguments, interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout
in TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar
to normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name
to messages as metadata
Driver API
----------
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where possible.
Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers
--------------
- Remove the IBM LCS driver for s390.
- Remove the sb1000 cable modem driver.
- Add support for SFP module access over SMBus.
- Add MCTP transport driver for MCTP-over-USB.
- Enable XDP metadata support in multiple drivers.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96% with
1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XY0S
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
||
|
Linus Torvalds
|
2e3fcbcc3b |
SCSI misc on 20250326
Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr, mpt3sas) and the removal of cxlflash. The only non-trivial core change is an addition to unit attention handling to recognize UAs for power on/reset and new media so the tape driver can use it. Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ+RQ2yYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe6DAQCdW/21 S1Y6BDlJLQfpWChGv6GIzanC+5sMfylw4d6ULgEA8upOE5L3fC29IY958jXig0o1 uLjxylwYEfVLDf8gwJ0= =mkM+ -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr, mpt3sas) and the removal of cxlflash. The only non-trivial core change is an addition to unit attention handling to recognize UAs for power on/reset and new media so the tape driver can use it" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits) scsi: st: Tighten the page format heuristics with MODE SELECT scsi: st: ERASE does not change tape location scsi: st: Fix array overflow in st_setup() scsi: target: tcm_loop: Fix wrong abort tag scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag scsi: hisi_sas: Fixed failure to issue vendor specific commands scsi: fnic: Remove unnecessary NUL-terminations scsi: fnic: Remove redundant flush_workqueue() calls scsi: core: Use a switch statement when attaching VPD pages scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2 scsi: ufs: renesas: Add reusable functions scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings scsi: ufs: renesas: Remove register control helper function scsi: ufs: renesas: Add register read to remove save/set/restore scsi: ufs: renesas: Replace init data by init code scsi: ufs: dt-bindings: renesas,ufs: Add calibration data scsi: mpi3mr: Task Abort EH Support scsi: storvsc: Don't report the host packet status as the hv status scsi: isci: Make most module parameters static scsi: megaraid_sas: Make most module parameters static ... |
||
|
Linus Torvalds
|
2a2274e90a |
pmdomain core:
- Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM pmdomain providers: - arm: Remove redundant state verification for the SCMI PM domain - bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP - rockchip: Add support for regulators - rockchip: Use SMC call to properly inform firmware - sunxi: Add V853 ppu support - thead: Add support for RISC-V TH1520 power-domains firmware: - Add support for the AON firmware protocol for RISC-V THEAD cpuidle-psci: - Update section in MAINTAINERS for cpuidle-psci - Add trace support for PSCI domain-idlestates -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmfimQ8XHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmp5A//QuqG0PiwrDyR/qOgOaYXHLe3 lYohfHtLyKVO0qAxhhiRbUZQrK4yitkRUJoXHcJuIqqXXjiM3tKu5Vp5loqVpqZi Q8nj6gEIUA1FQjY0h8VTS+NWXA5xbsqgayzw2U6BAfKHQwsvcMXn/hT5v8d0Q2WG UVNb+Xz25q6qzZPbhR/wfJ8kvFkGjV1GtIG3PPwA+C31jFjdcZhU+Rlwtgu+WDZE yofA/pkw5jdDkODTyysYhHKpZlnX+V1yUqs2xym27M2xmbCDpsn9IM45omuFCdnh 7dyKtG55XLd9wpAtO2DVvUWW0bhtr/zfDpWvDQdevQLjwrIdw5wdg53SE3NpNR7/ cCWLM7OFaTJDuuK/upuT75ZKaFqEu5QV9+Na5skQhL0Tl4V9A0nNRPLQXJItGZWv XNfV9OxljYK8c+5fEEEB+pBymZ2LeRvw2+P3DIMSgYNwdZMudmNRWsQe2SjbC4jI G9XzpXw6YaIUNmI8fGGZ4U4CqMg0bOjY7zlQL2VMTe3+JJGdpCRmONT8EV/LH3PQ 2V4dSjwoWH0lmQLo2trNDuIWj6AdGNObSL3LXSKPo6ORXg24dWdI9Dbc7PpPvOb0 CZ9AV3SezfmkSyODI5G5ULUeH1hy4h6jn9py2SoVRS3SQyznh0HZj9kBlyuVgfmL mArHaUCmVHPKhAvLc1g= =Wihe -----END PGP SIGNATURE----- Merge tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM pmdomain providers: - arm: Remove redundant state verification for the SCMI PM domain - bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP - rockchip: Add support for regulators - rockchip: Use SMC call to properly inform firmware - sunxi: Add V853 ppu support - thead: Add support for RISC-V TH1520 power-domains firmware: - Add support for the AON firmware protocol for RISC-V THEAD cpuidle-psci: - Update section in MAINTAINERS for cpuidle-psci - Add trace support for PSCI domain-idlestates" * tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (29 commits) firmware: thead: add CONFIG_MAILBOX dependency firmware: thead,th1520-aon: Fix use after free in th1520_aon_init() pmdomain: arm: scmi_pm_domain: Remove redundant state verification pmdomain: thead: fix TH1520_AON_PROTOCOL dependency pmdomain: thead: Add power-domain driver for TH1520 dt-bindings: power: Add TH1520 SoC power domains firmware: thead: Add AON firmware protocol driver dt-bindings: firmware: thead,th1520: Add support for firmware node pmdomain: rockchip: add regulator dependency pmdomain: rockchip: add regulator support pmdomain: rockchip: fix rockchip_pd_power error handling pmdomain: rockchip: reduce indentation in rockchip_pd_power pmdomain: rockchip: forward rockchip_do_pmu_set_power_domain errors pmdomain: rockchip: cleanup mutex handling in rockchip_pd_power dt-bindings: power: rockchip: add regulator support pmdomain: rockchip: Fix build error pmdomain: imx: gpcv2: use proper helper for property detection MAINTAINERS: Update section for cpuidle-psci pmdomain: rockchip: Check if SMC could be handled by TA cpuidle: psci: Add trace for PSCI domain idle ... |
||
|
Linus Torvalds
|
32b22538be |
Scheduler updates for v6.15:
[ Merge note, these two commits are identical:
-
|
||
|
Linus Torvalds
|
3ba7dfb8da |
RCU pull request for v6.15
This pull request contains the following branches:
docs.2025.02.04a:
- Add broken-timing possibility to stallwarn.rst.
- Improve discussion of this_cpu_ptr(), add raw_cpu_ptr().
- Document self-propagating callbacks.
- Point call_srcu() to call_rcu() for detailed memory ordering.
- Add CONFIG_RCU_LAZY delays to call_rcu() kernel-doc header.
- Clarify RCU_LAZY and RCU_LAZY_DEFAULT_OFF help text.
- Remove references to old grace-period-wait primitives.
srcu.2025.02.05a:
- Introduce srcu_read_{un,}lock_fast(), which is similar to
srcu_read_{un,}lock_lite(): avoid smp_mb()s in lock and unlock at the
cost of calling synchronize_rcu() in synchronize_srcu(). Moreover, by
returning the percpu offset of the counter at srcu_read_lock_fast()
time, srcu_read_unlock_fast() can save extra pointer dereferencing,
which makes it faster than srcu_read_{un,}lock_lite().
srcu_read_{un,}lock_fast() are intended to replace
rcu_read_{un,}lock_trace() if possible.
torture.2025.02.05a:
- Add get_torture_init_jiffies() to return the start time of the test.
- Add a test_boost_holdoff module parameter to allow delaying boosting
tests when building rcutorture as built-in.
- Add grace period sequence number logging at the beginning and end of
failure/close-call results.
- Switch to hexadecimal for the expedited grace period sequence number
in the rcu_exp_grace_period trace point.
- Make cur_ops->format_gp_seqs take buffer length.
- Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool.
- Complain when invalid SRCU reader_flavor is specified.
- Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing, which forces SRCU
uses atomics even when percpu ops are NMI safe, and use the Kconfig
for SRCU lockdep testing.
misc.2025.03.04a:
- Split rcu_report_exp_cpu_mult() mask parameter and use for tracing.
- Remove READ_ONCE() for rdp->gpwrap access in __note_gp_changes().
- Fix get_state_synchronize_rcu_full() GP-start detection.
- Move RCU Tasks self-tests to core_initcall().
- Print segment lengths in show_rcu_nocb_gp_state().
- Make RCU watch ct_kernel_exit_state() warning.
- Flush console log from kernel_power_off().
- rcutorture: Allow a negative value for nfakewriters.
- rcu: Update TREE05.boot to test normal synchronize_rcu().
- rcu: Use _full() API to debug synchronize_rcu().
lazypreempt.2025.03.04a: Make RCU handle PREEMPT_LAZY better:
- Fix header guard for rcu_all_qs().
- rcu: Rename PREEMPT_AUTO to PREEMPT_LAZY.
- Update __cond_resched comment about RCU quiescent states.
- Handle unstable rdp in rcu_read_unlock_strict().
- Handle quiescent states for PREEMPT_RCU=n, PREEMPT_COUNT=y.
- osnoise: Provide quiescent states.
- Adjust rcutorture with possible PREEMPT_RCU=n && PREEMPT_COUNT=y
combination.
- Limit PREEMPT_RCU configurations.
- Make rcutorture senario TREE07 and senario TREE10 use PREEMPT_LAZY=y.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEj5IosQTPz8XU1wRHSXnow7UH+rgFAmfeBLQACgkQSXnow7UH
+rh11Qf/Rt6IZJ/YT/V9Sd+8hMx4O0BMh779pr9cD6mbAG+FDk2Yeva1m8vIdFOb
qId6oc8K/ef2JfFjSn0oHMzQP2D3XUyiJWPNbBDHv/D8Os8GZgjzu8dkxVkSbdbY
OxtvIflbcqFN1JDJfGKZnTEW0/YxGqfnS9b6R7iyyA7SOGQ/WubGOE5qNCqPufc9
zJiP+qTUFYQzCIiPlEJul39o9KboPogbt3QAAQjWmi3utd77ehJnm/15FvAjyau4
uhC2cnGfMY535rQaiaQeBQ/IHIowKripCq0JQFvcUNdyArZM3HOI2x79+2II6ft7
mjHskNODOIJHfW2o1RzQ0yRYAywFIg==
=J+mH
-----END PGP SIGNATURE-----
Merge tag 'rcu-next-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Boqun Feng:
"Documentation:
- Add broken-timing possibility to stallwarn.rst
- Improve discussion of this_cpu_ptr(), add raw_cpu_ptr()
- Document self-propagating callbacks
- Point call_srcu() to call_rcu() for detailed memory ordering
- Add CONFIG_RCU_LAZY delays to call_rcu() kernel-doc header
- Clarify RCU_LAZY and RCU_LAZY_DEFAULT_OFF help text
- Remove references to old grace-period-wait primitives
srcu:
- Introduce srcu_read_{un,}lock_fast(), which is similar to
srcu_read_{un,}lock_lite(): avoid smp_mb()s in lock and unlock
at the cost of calling synchronize_rcu() in synchronize_srcu()
Moreover, by returning the percpu offset of the counter at
srcu_read_lock_fast() time, srcu_read_unlock_fast() can avoid
extra pointer dereferencing, which makes it faster than
srcu_read_{un,}lock_lite()
srcu_read_{un,}lock_fast() are intended to replace
rcu_read_{un,}lock_trace() if possible
RCU torture:
- Add get_torture_init_jiffies() to return the start time of the test
- Add a test_boost_holdoff module parameter to allow delaying
boosting tests when building rcutorture as built-in
- Add grace period sequence number logging at the beginning and end
of failure/close-call results
- Switch to hexadecimal for the expedited grace period sequence
number in the rcu_exp_grace_period trace point
- Make cur_ops->format_gp_seqs take buffer length
- Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
- Complain when invalid SRCU reader_flavor is specified
- Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing, which forces SRCU
uses atomics even when percpu ops are NMI safe, and use the Kconfig
for SRCU lockdep testing
Misc:
- Split rcu_report_exp_cpu_mult() mask parameter and use for tracing
- Remove READ_ONCE() for rdp->gpwrap access in __note_gp_changes()
- Fix get_state_synchronize_rcu_full() GP-start detection
- Move RCU Tasks self-tests to core_initcall()
- Print segment lengths in show_rcu_nocb_gp_state()
- Make RCU watch ct_kernel_exit_state() warning
- Flush console log from kernel_power_off()
- rcutorture: Allow a negative value for nfakewriters
- rcu: Update TREE05.boot to test normal synchronize_rcu()
- rcu: Use _full() API to debug synchronize_rcu()
Make RCU handle PREEMPT_LAZY better:
- Fix header guard for rcu_all_qs()
- rcu: Rename PREEMPT_AUTO to PREEMPT_LAZY
- Update __cond_resched comment about RCU quiescent states
- Handle unstable rdp in rcu_read_unlock_strict()
- Handle quiescent states for PREEMPT_RCU=n, PREEMPT_COUNT=y
- osnoise: Provide quiescent states
- Adjust rcutorture with possible PREEMPT_RCU=n && PREEMPT_COUNT=y
combination
- Limit PREEMPT_RCU configurations
- Make rcutorture senario TREE07 and senario TREE10 use
PREEMPT_LAZY=y"
* tag 'rcu-next-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (59 commits)
rcutorture: Make scenario TREE07 build CONFIG_PREEMPT_LAZY=y
rcutorture: Make scenario TREE10 build CONFIG_PREEMPT_LAZY=y
rcu: limit PREEMPT_RCU configurations
rcutorture: Update ->extendables check for lazy preemption
rcutorture: Update rcutorture_one_extend_check() for lazy preemption
osnoise: provide quiescent states
rcu: Use _full() API to debug synchronize_rcu()
rcu: Update TREE05.boot to test normal synchronize_rcu()
rcutorture: Allow a negative value for nfakewriters
Flush console log from kernel_power_off()
context_tracking: Make RCU watch ct_kernel_exit_state() warning
rcu/nocb: Print segment lengths in show_rcu_nocb_gp_state()
rcu-tasks: Move RCU Tasks self-tests to core_initcall()
rcu: Fix get_state_synchronize_rcu_full() GP-start detection
torture: Make SRCU lockdep testing use srcu_read_lock_nmisafe()
srcu: Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing
rcutorture: Complain when invalid SRCU reader_flavor is specified
rcutorture: Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
rcutorture: Make cur_ops->format_gp_seqs take buffer length
rcutorture: Add ftrace-compatible timestamp to GP# failure/close-call output
...
|
||
|
Linus Torvalds
|
bcb044256d |
sched_ext: Changes for v6.15
- Add mechanism to count and report internal events. This significantly improves visibility on subtle corner conditions. - The default idle CPU selection logic is revamped and improved in multiple ways including being made topology aware. - sched_ext was disabling ttwu_queue for simplicity, which can be costly when hardware topology is more complex. Implement SCX_OPS_ALLOWED_QUEUED_WAKEUP so that BPF schedulers can selectively enable ttwu_queue. - tools/sched_ext updates to improve compatibility among others. - Other misc updates and fixes. - sched_ext/for-6.14-fixes were pulled a few times to receive prerequisite fixes and resolve conflicts. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ999Sg4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGf/KAQCoMTVOBpQT9gCaCKDOmrVJTwi6boEoV5WnGZzw PDr0vwEAq36iz4no6Y5THcN/DCx+52IiS0zuhPy3rBZVo11TMgU= =iQ+A -----END PGP SIGNATURE----- Merge tag 'sched_ext-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext updates from Tejun Heo: - Add mechanism to count and report internal events. This significantly improves visibility on subtle corner conditions. - The default idle CPU selection logic is revamped and improved in multiple ways including being made topology aware. - sched_ext was disabling ttwu_queue for simplicity, which can be costly when hardware topology is more complex. Implement SCX_OPS_ALLOWED_QUEUED_WAKEUP so that BPF schedulers can selectively enable ttwu_queue. - tools/sched_ext updates to improve compatibility among others. - Other misc updates and fixes. - sched_ext/for-6.14-fixes were pulled a few times to receive prerequisite fixes and resolve conflicts. * tag 'sched_ext-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (42 commits) sched_ext: idle: Refactor scx_select_cpu_dfl() sched_ext: idle: Honor idle flags in the built-in idle selection policy sched_ext: Skip per-CPU tasks in scx_bpf_reenqueue_local() sched_ext: Add trace point to track sched_ext core events sched_ext: Change the event type from u64 to s64 sched_ext: Documentation: add task lifecycle summary tools/sched_ext: Provide a compatible helper for scx_bpf_events() selftests/sched_ext: Add NUMA-aware scheduler test tools/sched_ext: Provide consistent access to scx flags sched_ext: idle: Fix scx_bpf_pick_any_cpu_node() behavior sched_ext: idle: Introduce scx_bpf_nr_node_ids() sched_ext: idle: Introduce node-aware idle cpu kfunc helpers sched_ext: idle: Per-node idle cpumasks sched_ext: idle: Introduce SCX_OPS_BUILTIN_IDLE_PER_NODE sched_ext: idle: Make idle static keys private sched/topology: Introduce for_each_node_numadist() iterator mm/numa: Introduce nearest_node_nodemask() nodemask: numa: reorganize inclusion path nodemask: add nodes_copy() tools/sched_ext: Sync with scx repo ... |
||
|
Linus Torvalds
|
05b00ffd7a |
slab updates for 6.15
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmfb4r0ACgkQu+CwddJF iJq6NQf/WNEQAoRY1DEeQiBAvixTYry0j/w1dumpValvt/lybccMwwhWho5i17/o 2J4nif5L5O6D+jZWyz76fx2bcn7GjhteiKtzuVI0mSdDXyYLBLVGa9dMrE1/0kxy 51HnldCLfNmC3qp0pG2E7j2chsxDbTwz4ZPiEAW9kzpvgfEWmfydejzv5+ROFQm7 gH3vRJ7H5enxp2a52DovBN1JllYK9uxMTM3Pq1L37n9Hm1zIR+swbI/3VhklRN4C nrO6my6GU2+bMQTvPKwuHBIHUH7yS6Z411wCotPmRO0jfLMq/UY5lthgWpqvsC+o XtgULoikQbcd8kts9g71bHSEinwlGw== =whkW -----END PGP SIGNATURE----- Merge tag 'slab-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab updates from Vlastimil Babka: - Move the TINY_RCU kvfree_rcu() implementation from RCU to SLAB subsystem and cleanup its integration (Vlastimil Babka) Following the move of the TREE_RCU batching kvfree_rcu() implementation in 6.14, move also the simpler TINY_RCU variant. Refactor the #ifdef guards so that the simple implementation is also used with SLUB_TINY. Remove the need for RCU to recognize fake callback function pointers (__is_kvfree_rcu_offset()) when handling call_rcu() by implementing a callback that calculates the object's address from the embedded rcu_head address without knowing its offset. - Improve kmalloc cache randomization in kvmalloc (GONG Ruiqi) Due to an extra layer of function call, all kvmalloc() allocations used the same set of random caches. Thanks to moving the kvmalloc() implementation to slub.c, this is improved and randomization now works for kvmalloc. - Various improvements to debugging, testing and other cleanups (Hyesoo Yu, Lilith Gkini, Uladzislau Rezki, Matthew Wilcox, Kevin Brodsky, Ye Bin) * tag 'slab-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: slub: Handle freelist cycle in on_freelist() mm/slab: call kmalloc_noprof() unconditionally in kmalloc_array_noprof() slab: Mark large folios for debugging purposes kunit, slub: Add test_kfree_rcu_wq_destroy use case mm, slab: cleanup slab_bug() parameters mm: slub: call WARN() when detecting a slab corruption mm: slub: Print the broken data before restoring them slab: Achieve better kmalloc caches randomization in kvmalloc slab: Adjust placement of __kvmalloc_node_noprof mm/slab: simplify SLAB_* flag handling slab: don't batch kvfree_rcu() with SLUB_TINY rcu, slab: use a regular callback function for kvfree_rcu rcu: remove trace_rcu_kvfree_callback slab, rcu: move TINY_RCU variant of kvfree_rcu() to SLAB |
||
|
Gabriele Monaco
|
26f80681a0 |
sched: Add sched tracepoints for RV task model
Add the following tracepoints:
* sched_entry(bool preempt, ip)
Called while entering __schedule
* sched_exit(bool is_switch, ip)
Called while exiting __schedule
* sched_set_state(task, curr_state, state)
Called when a task changes its state (to and from running)
These tracepoints are useful to describe the Linux task model and are
adapted from the patches by Daniel Bristot de Oliveira
(https://bristot.me/linux-task-model/).
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Petr Mladek
|
c1657640a8 |
tracing: gfp: vsprintf: Do not print "none" when using %pGg printf format
The commit |
||
|
Trond Myklebust
|
9827144bfb |
NFS: Treat ENETUNREACH errors as fatal in containers
Propagate the NFS_MOUNT_NETUNREACH_FATAL flag to work with the generic NFS client. If the flag is set, the client will receive ENETDOWN and ENETUNREACH errors from the RPC layer, and is expected to treat them as being fatal. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Jeff Layton <jlayton@kernel.org> Acked-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Ingo Molnar
|
dd5bdaf2b7 |
sched/debug: Make CONFIG_SCHED_DEBUG functionality unconditional
All the big Linux distros enable CONFIG_SCHED_DEBUG, because the various features it provides help not just with kernel development, but with system administration and user-space software development as well. Reflect this reality and enable this functionality unconditionally. Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250317104257.3496611-4-mingo@kernel.org |
||
|
Martin Liu
|
15766485e4 |
mm/page_alloc: add trace event for totalreserve_pages calculation
This commit introduces a new trace event, `mm_calculate_totalreserve_pages`, which reports the new reserve value at the exact time when it takes effect. The `totalreserve_pages` value represents the total amount of memory reserved across all zones and nodes in the system. This reserved memory is crucial for ensuring that critical kernel operations have access to sufficient memory, even under memory pressure. By tracing the `totalreserve_pages` value, developers can gain insights that how the total reserved memory changes over time. Link: https://lkml.kernel.org/r/20250308034606.2036033-4-liumartin@google.com Signed-off-by: Martin Liu <liumartin@google.com> Acked-by: David Rientjes <rientjes@google.com> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Martin Liu
|
a293aba4a5 |
mm/page_alloc: add trace event for per-zone lowmem reserve setup
This commit introduces the `mm_setup_per_zone_lowmem_reserve` trace event,which provides detailed insights into the kernel's per-zone lowmem reserve configuration. The trace event provides precise timestamps, allowing developers to 1. Correlate lowmem reserve changes with specific kernel events and able to diagnose unexpected kswapd or direct reclaim behavior triggered by dynamic changes in lowmem reserve. 2. Know memory allocation failures that occur due to insufficient lowmem reserve, by precisely correlating allocation attempts with reserve adjustments. Link: https://lkml.kernel.org/r/20250308034606.2036033-3-liumartin@google.com Signed-off-by: Martin Liu <liumartin@google.com> Acked-by: David Rientjes <rientjes@google.com> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Martin Liu
|
8c02048d1c |
mm/page_alloc: add trace event for per-zone watermark setup
Patch series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages", v2. This patchset introduces tracepoints to track changes in the lowmem reserves, watermarks and totalreserve_pages. This helps to track the exact timing of such changes and understand their relation to reclaim activities. The tracepoints added are: mm_setup_per_zone_lowmem_reserve mm_setup_per_zone_wmarks mm_calculate_totalreserve_pagesi This patch (of 3): This commit introduces the `mm_setup_per_zone_wmarks` trace event, which provides detailed insights into the kernel's per-zone watermark configuration, offering precise timing and the ability to correlate watermark changes with specific kernel events. While `/proc/zoneinfo` provides some information about zone watermarks, this trace event offers: 1. The ability to link watermark changes to specific kernel events and logic. 2. The ability to capture rapid or short-lived changes in watermarks that may be missed by user-space polling 3. Diagnosing unexpected kswapd activity or excessive direct reclaim triggered by rapidly changing watermarks. Link: https://lkml.kernel.org/r/20250308034606.2036033-1-liumartin@google.com Link: https://lkml.kernel.org/r/20250308034606.2036033-2-liumartin@google.com Signed-off-by: Martin Liu <liumartin@google.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Martin Liu <liumartin@google.com> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Tang Yizhou
|
6cc4c3aa71 |
writeback: fix calculations in trace_balance_dirty_pages() for cgwb
In the commit |
||
|
Tang Yizhou
|
28c24ef9e0 |
writeback: rename variables in trace_balance_dirty_pages()
Rename bdi_setpoint and bdi_dirty in the tracepoint to wb_setpoint and wb_dirty, respectively. These changes were omitted by Tejun in the cgroup writeback patchset. Link: https://lkml.kernel.org/r/20250304110318.159567-3-yizhou.tang@shopee.com Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Tang Yizhou
|
f1ab2831e2 |
writeback: let trace_balance_dirty_pages() take struct dtc as parameter
Patch series "Fix calculations in trace_balance_dirty_pages() for cgwb", v2. In my experiment, I found that the output of trace_balance_dirty_pages() in the cgroup writeback scenario was strange because trace_balance_dirty_pages() always uses global_wb_domain.dirty_limit for related calculations instead of the dirty_limit of the corresponding memcg's wb_domain. The basic idea of the fix is to store the hard dirty limit value computed in wb_position_ratio() into struct dirty_throttle_control and use it for calculations in trace_balance_dirty_pages(). This patch (of 3): Currently, trace_balance_dirty_pages() already has 12 parameters. In the patch #3, I initially attempted to introduce an additional parameter. However, in include/linux/trace_events.h, bpf_trace_run12() only supports up to 12 parameters and bpf_trace_run13() does not exist. To reduce the number of parameters in trace_balance_dirty_pages(), we can make it accept a pointer to struct dirty_throttle_control as a parameter. To achieve this, we need to move the definition of struct dirty_throttle_control from mm/page-writeback.c to include/linux/writeback.h. Link: https://lkml.kernel.org/r/20250304110318.159567-1-yizhou.tang@shopee.com Link: https://lkml.kernel.org/r/20250304110318.159567-2-yizhou.tang@shopee.com Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Tang Yizhou <yizhou.tang@shopee.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Gao Xiang
|
2e1473d519 |
erofs: implement 48-bit block addressing for unencoded inodes
It adapts the on-disk changes from the previous commit. It also supports EROFS_NULL_ADDR (all 1's) for EROFS_INODE_FLAT_PLAIN inodes to indicate 0-filled inodes, as it's common for composefs use cases. As a result, EROFS_INODE_CHUNK_BASED is no longer needed. Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Acked-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20250310095459.2620647-5-hsiangkao@linux.alibaba.com |
||
|
David Howells
|
e2c2cb8ef0 |
afs: Simplify cell record handling
Simplify afs_cell record handling to avoid very occasional races that cause
module removal to hang (it waits for all cell records to be removed).
There are two things that particularly contribute to the difficulty:
firstly, the code tries to pass a ref on the cell to the cell's maintenance
work item (which gets awkward if the work item is already queued); and,
secondly, there's an overall cell manager that tries to use just one timer
for the entire cell collection (to avoid having loads of timers). However,
both of these are probably unnecessarily restrictive.
To simplify this, the following changes are made:
(1) The cell record collection manager is removed. Each cell record
manages itself individually.
(2) Each afs_cell is given a second work item (cell->destroyer) that is
queued when its refcount reaches zero. This is not done in the
context of the putting thread as it might be in an inconvenient place
to sleep.
(3) Each afs_cell is given its own timer. The timer is used to expire the
cell record after a period of unuse if not otherwise pinned and can
also be used for other maintenance tasks if necessary (of which there
are currently none as DNS refresh is triggered by filesystem
operations).
(4) The afs_cell manager work item (cell->manager) is no longer given a
ref on the cell when queued; rather, the manager must be deleted.
This does away with the need to deal with the consequences of losing a
race to queue cell->manager. Clean up of extra queuing is deferred to
the destroyer.
(5) The cell destroyer work item makes sure the cell timer is removed and
that the normal cell work is cancelled before farming the actual
destruction off to RCU.
(6) When a network namespace is destroyed or the kafs module is unloaded,
it's now a simple matter of marking the namespace as dead then just
waking up all the cell work items. They will then remove and destroy
themselves once all remaining activity counts and/or a ref counts are
dropped. This makes sure that all server records are dropped first.
(7) The cell record state set is reduced to just four states: SETTING_UP,
ACTIVE, REMOVING and DEAD. The record persists in the active state
even when it's not being used until the time comes to remove it rather
than downgrading it to an inactive state from whence it can be
restored.
This means that the cell still appears in /proc and /afs when not in
use until it switches to the REMOVING state - at which point it is
removed.
Note that the REMOVING state is included so that someone wanting to
resurrect the cell record is forced to wait whilst the cell is torn
down in that state. Once it's in the DEAD state, it has been removed
from net->cells tree and is no longer findable and can be replaced.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-16-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-12-dhowells@redhat.com/ # v4
|
||
|
David Howells
|
4882ba7857 |
afs: Fix afs_server ref accounting
The current way that afs_server refs are accounted and cleaned up sometimes
cause rmmod to hang when it is waiting for cell records to be removed. The
problem is that the cell cleanup might occasionally happen before the
server cleanup and then there's nothing that causes the cell to
garbage-collect the remaining servers as they become inactive.
Partially fix this by:
(1) Give each afs_server record its own management timer that rather than
relying on the cell manager's central timer to drive each individual
cell's maintenance work item to garbage collect servers.
This timer is set when afs_unuse_server() reduces a server's activity
count to zero and will schedule the server's destroyer work item upon
firing.
(2) Give each afs_server record its own destroyer work item that removes
the record from the cell's database, shuts down the timer, cancels any
pending work for itself, sends an RPC to the server to cancel
outstanding callbacks.
This change, in combination with the timer, obviates the need to try
and coordinate so closely between the cell record and a bunch of other
server records to try and tear everything down in a coordinated
fashion. With this, the cell record is pinned until the server RCU is
complete and namespace/module removal will wait until all the cell
records are removed.
(3) Now that incoming calls are mapped to servers (and thus cells) using
data attached to an rxrpc_peer, the UUID-to-server mapping tree is
moved from the namespace to the cell (cell->fs_servers). This means
there can no longer be duplicates therein - and that allows the
mapping tree to be simpler as there doesn't need to be a chain of
same-UUID servers that are in different cells.
(4) The lock protecting the UUID mapping tree is switched to an
rw_semaphore on the cell rather than a seqlock on the namespace as
it's now only used during mounting in contexts in which we're allowed
to sleep.
(5) When it comes time for a cell that is being removed to purge its set
of servers, it just needs to iterate over them and wake them up. Once
a server becomes inactive, its destroyer work item will observe the
state of the cell and immediately remove that record.
(6) When a server record is removed, it is marked AFS_SERVER_FL_EXPIRED to
prevent reattempts at removal. The record will be dispatched to RCU
for destruction once its refcount reaches 0.
(7) The AFS_SERVER_FL_UNCREATED/CREATING flags are used to synchronise
simultaneous creation attempts. If one attempt fails, it will abandon
the attempt and allow another to try again.
Note that the record can't just be abandoned when dead as it's bound
into a server list attached to a volume and only subject to
replacement if the server list obtained for the volume from the VLDB
changes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-15-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-11-dhowells@redhat.com/ # v4
|
||
|
David Howells
|
40e8b52fe8 |
afs: Use the per-peer app data provided by rxrpc
Make use of the per-peer application data that rxrpc now allows the application to store on the rxrpc_peer struct to hold a back pointer to the afs_server record that peer represents an endpoint for. Then, when a call comes in to the AFS cache manager, this can be used to map it to the correct server record rather than having to use a UUID-to-server mapping table and having to do an additional lookup. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-14-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-10-dhowells@redhat.com/ # v4 |
||
|
David Howells
|
469c82b558 |
afs: Drop the net parameter from afs_unuse_cell()
Remove the redundant net parameter to afs_unuse_cell() as cell->net can be used instead. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-12-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-8-dhowells@redhat.com/ # v4 |
||
|
David Howells
|
92c48157ad |
afs: Make afs_lookup_cell() take a trace note
Pass a note to be added to the afs_cell tracepoint to afs_lookup_cell() so that different callers can be distinguished. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-11-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-7-dhowells@redhat.com/ # v4 |
||
|
David Howells
|
76daa300d4 |
afs: Improve server refcount/active count tracing
Improve server refcount/active count tracing to distinguish between simply getting/putting a ref and using/unusing the server record (which changes the activity count as well as the refcount). This makes it a bit easier to work out what's going on. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-10-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-6-dhowells@redhat.com/ # v4 |
||
|
David Howells
|
4f67bcf6d6 |
afs: Improve afs_volume tracing to display a debug ID
Improve the tracing of afs_volume objects to include displaying a debug ID so that different instances of volumes with the same "vid" can be distinguished. Also be consistent about displaying the volume's refcount (and not the cell's). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-9-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-5-dhowells@redhat.com/ # v4 |
||
|
David Howells
|
1d0b929fc0 |
afs: Change dynroot to create contents on demand
Change the AFS dynamic root to do things differently:
(1) Rather than having the creation of cell records create inodes and
dentries for cell mountpoints, create them on demand during lookup.
This simplifies cell management and locking as we no longer have to
create these objects in advance *and* on speculative lookup by the
user for a cell that isn't precreated.
(2) Rather than using the libfs dentry-based readdir (the dentries now no
longer exist until accessed from (1)), have readdir generate the
contents by reading the list of cells. The @cell symlinks get pushed
in positions 2 and 3 if rootcell has been configured.
(3) Make the @cell symlink dentries persist for the life of the superblock
or until reclaimed, but make cell mountpoints disappear immediately if
unused.
It's not perfect as someone doing an "ls -l /afs" may create a whole
bunch of dentries which will be garbage collected immediately. But
any dentry that gets automounted will be pinned by the mount, so it
shouldn't be too bad.
(4) Allocate the inode numbers for the cell mountpoints from an IDR to
prevent duplicates appearing in the event it cycles round. The number
allocated from the IDR is doubled to provide two inode numbers - one
for the normal cell name (RO) and one for the dotted cell name (RW).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
|
||
|
Steven Rostedt
|
ca29a0bf12 |
tracing: gfp: Remove duplication of recording GFP flags
The gfp_flags when recorded in the trace require being converted from
their numbers to values. Various macros are used to help facilitate this,
but there's two sets of macros that need to keep track of the same GFP
flags to stay in sync.
Commit
|
||
|
Changwoo Min
|
71d078803c |
sched_ext: Add trace point to track sched_ext core events
Add tracing support to track sched_ext core events
(/sched_ext/sched_ext_event). This may be useful for debugging sched_ext
schedulers that trigger a particular event.
The trace point can be used as other trace points, so it can be used in,
for example, `perf trace` and BPF programs, as follows:
======
$> sudo perf trace -e sched_ext:sched_ext_event --filter 'name == "SCX_EV_ENQ_SLICE_DFL"'
======
======
struct tp_sched_ext_event {
struct trace_entry ent;
u32 __data_loc_name;
s64 delta;
};
SEC("tracepoint/sched_ext/sched_ext_event")
int rtp_add_event(struct tp_sched_ext_event *ctx)
{
char event_name[128];
unsigned short offset = ctx->__data_loc_name & 0xFFFF;
bpf_probe_read_str((void *)event_name, 128, (char *)ctx + offset);
bpf_printk("name %s delta %lld", event_name, ctx->delta);
return 0;
}
======
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
||
|
Gabriele Monaco
|
486df3466d |
tracing: Fix DECLARE_TRACE_CONDITION
Commit |
||
|
Ulf Hansson
|
c432bdcf39 |
Linux 6.14-rc4
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj 79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU 1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33 AigLZ6M= =Y/7F -----END PGP SIGNATURE----- pmdomain: Merge tag 'v6.14-rc4' from Linus into next Linux 6.14-rc4 |
||
|
Jakub Kicinski
|
357660d759 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.14-rc5). Conflicts: drivers/net/ethernet/cadence/macb_main.c |
||
|
Linus Torvalds
|
1e15510b71 |
Including fixes from bluetooth. We didn't get netfilter or wireless PRs
this week, so next week's PR is probably going to be bigger. A healthy
dose of fixes for bugs introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net()
RDMA driver register notifier after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue
with LED support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=+Ci7
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
|
||
|
Tomas Glozar
|
a065bbf776 |
trace/osnoise: Add trace events for samples
Add trace events that fire at osnoise and timerlat sample generation, in addition to the already existing noise and threshold events. This allows processing the samples directly in the kernel, either with ftrace triggers or with BPF. Cc: John Kacur <jkacur@redhat.com> Cc: Luis Goncalves <lgoncalv@redhat.com> Link: https://lore.kernel.org/20250203090418.1458923-1-tglozar@redhat.com Signed-off-by: Tomas Glozar <tglozar@redhat.com> Tested-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
5394eea106 |
NFS Client Bugfixes for Linux 6.14-rc
Stable Fixes: * O_DIRECT writes should adjust file length Other Bugfixes: * Adjust delegated timestamps for O_DIRECT reads and writes * Prevent looping due to rpc_signal_task() races * Fix a deadlock when recovering state on a sillyrenamed file * Properly handle -ETIMEDOUT errors from tlshd * Suppress build warnings for unused procfs functions * Fix memory leak of lsm_contexts -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAme/L4gACgkQ18tUv7Cl QOsRxRAAyztxWRN/PWabOIu2ZfqvC2Z963B6YE1/jAXeSvBkaCOMca1I8cj7eqiY tpVGB+qUOfKSGhKFL1Zvy5UoewemWhDH/AunNN4cYgBJKaqz4+do6nYH9qkWqnsP kiXu2M+j3/HClk07y3ZNUllGHpJPEVz24iC+VJ/iKHWxUCqxqJrJfzX6ylwhq/Fi Nrlze49AVrywDaNjXNKnbGlUlTcDHyIJCtb2/aSkvJtdnTgD0kKvwTdEjQ205hBs JO1DEAEt9hxsMVETuluUxw7zkJ91SPII3lGo9lVSKqaNSXyPJFfO4HWPEXfhSsbY vEa3J4U26qUKggDZuBZijcN8di0O7+gKfD/s/GpmgvE9tzH7lFjKyQa5gwQmvRv0 PAY1QZyUCmfxkc4yVVXd+WqHzUU+nK2MFrNjbzoDSHWRktZKQcQwWGd+sCu284pq Qnie8XIdl4PqziRn+AvlbV93RGN90Y8You0Y+xGPbGxMTP9vy1s10GF44zwHfqyf 9H7Lcqidms709rMnOGHr/SpdG3G8k0VscirTqi8WPCDBUNyhJuPqcIAAmIeAt6D6 VA6NgDfBhd4uIIo+krntggBkenkXLJJBI2VT+qkRx/Uo+0i2rLEjpIcubLRTFjY3 YxRYvzSxfPcy4Fiwx/Y8IfYZb3gDLXy2sHZBjfOSwyBKHUaT0Hk= =Deh3 -----END PGP SIGNATURE----- Merge tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs Pull NFS client fixes from Anna Schumaker: "Stable Fixes: - O_DIRECT writes should adjust file length Other Bugfixes: - Adjust delegated timestamps for O_DIRECT reads and writes - Prevent looping due to rpc_signal_task() races - Fix a deadlock when recovering state on a sillyrenamed file - Properly handle -ETIMEDOUT errors from tlshd - Suppress build warnings for unused procfs functions - Fix memory leak of lsm_contexts" * tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: lsm,nfs: fix memory leak of lsm_context sunrpc: suppress warnings for unused procfs functions SUNRPC: Handle -ETIMEDOUT return from tlshd NFSv4: Fix a deadlock when recovering state on a sillyrenamed file SUNRPC: Prevent looping due to rpc_signal_task() races NFS: Adjust delegated timestamps for O_DIRECT reads and writes NFS: O_DIRECT writes must check and adjust the file length |
||
|
Martin K. Petersen
|
adc4fb9c81 |
Merge patch series "Initial support for RK3576 UFS controller"
Shawn Lin <shawn.lin@rock-chips.com> says: This patchset adds initial UFS controller supprt for RK3576 SoC. Patch 1 is the dt-bindings. Patch 2-4 deal with rpm and spm support in advanced suggested by Ulf. Patch 5 exports two new APIs for host driver. Patch 6 and 7 are the host driver and dtsi support. Link: https://lore.kernel.org/r/1738736156-119203-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
David Howells
|
1f0fc3374f |
afs: Give an afs_server object a ref on the afs_cell object it points to
Give an afs_server object a ref on the afs_cell object it points to so that
the cell doesn't get deleted before the server record.
Whilst this is circular (cell -> vol -> server_list -> server -> cell), the
ref only pins the memory, not the lifetime as that's controlled by the
activity counter. When the volume's activity counter reaches 0, it
detaches from the cell and discards its server list; when a cell's activity
counter reaches 0, it discards its root volume. At that point, the
circularity is cut.
Fixes:
|
||
|
Jakub Kicinski
|
5d6ba5ab85 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.14-rc4). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Trond Myklebust
|
5bbd6e863b |
SUNRPC: Prevent looping due to rpc_signal_task() races
If rpc_signal_task() is called while a task is in an rpc_call_done()
callback function, and the latter calls rpc_restart_call(), the task can
end up looping due to the RPC_TASK_SIGNALLED flag being set without the
tk_rpc_status being set.
Removing the redundant mechanism for signalling the task fixes the
looping behaviour.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes:
|
||
|
Breno Leitao
|
8e677a4661 |
trace: tcp: Add tracepoint for tcp_cwnd_reduction()
Add a lightweight tracepoint to monitor TCP congestion window
adjustments via tcp_cwnd_reduction(). This tracepoint enables tracking
of:
- TCP window size fluctuations
- Active socket behavior
- Congestion window reduction events
Meta has been using BPF programs to monitor this function for years.
Adding a proper tracepoint provides a stable API for all users who need
to monitor TCP congestion window behavior.
Use DECLARE_TRACE instead of TRACE_EVENT to avoid creating trace event
infrastructure and exporting to tracefs, keeping the implementation
minimal. (Thanks Steven Rostedt)
Given that this patch creates a rawtracepoint, you could hook into it
using regular tooling, like bpftrace, using regular rawtracepoint
infrastructure, such as:
rawtracepoint:tcp_cwnd_reduction_tp {
....
}
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250214-cwnd_tracepoint-v2-1-ef8d15162d95@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||
|
Keita Morisaki
|
7b7644831e |
cpuidle: psci: Add trace for PSCI domain idle
The trace event cpu_idle provides insufficient information for debugging PSCI requests due to lacking access to determined PSCI domain idle states. The cpu_idle usually only shows -1, 0, or 1 regardless how many idle states the power domain has. Add new trace events namely psci_domain_idle_enter and psci_domain_idle_exit to trace enter and exit events with a determined idle state. These new trace events will help developers debug CPUidle issues on ARM systems using PSCI by providing more detailed information about the requested idle states. Signed-off-by: Keita Morisaki <keyz@google.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Dhruva Gole <d-gole@ti.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20250210055828.1875372-1-keyz@google.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
|
David Howells
|
1d0013962d
|
netfs: Fix a number of read-retry hangs
Fix a number of hangs in the netfslib read-retry code, including:
(1) netfs_reissue_read() doubles up the getting of references on
subrequests, thereby leaking the subrequest and causing inode eviction
to wait indefinitely. This can lead to the kernel reporting a hang in
the filesystem's evict_inode().
Fix this by removing the get from netfs_reissue_read() and adding one
to netfs_retry_read_subrequests() to deal with the one place that
didn't double up.
(2) The loop in netfs_retry_read_subrequests() that retries a sequence of
failed subrequests doesn't record whether or not it retried the one
that the "subreq" pointer points to when it leaves the loop. It may
not if renegotiation/repreparation of the subrequests means that fewer
subrequests are needed to span the cumulative range of the sequence.
Because it doesn't record this, the piece of code that discards
now-superfluous subrequests doesn't know whether it should discard the
one "subreq" points to - and so it doesn't.
Fix this by noting whether the last subreq it examines is superfluous
and if it is, then getting rid of it and all subsequent subrequests.
If that one one wasn't superfluous, then we would have tried to go
round the previous loop again and so there can be no further unretried
subrequests in the sequence.
(3) netfs_retry_read_subrequests() gets yet an extra ref on any additional
subrequests it has to get because it ran out of ones it could reuse to
to renegotiation/repreparation shrinking the subrequests.
Fix this by removing that extra ref.
(4) In netfs_retry_reads(), it was using wait_on_bit() to wait for
NETFS_SREQ_IN_PROGRESS to be cleared on all subrequests in the
sequence - but netfs_read_subreq_terminated() is now using a wait
queue on the request instead and so this wait will never finish.
Fix this by waiting on the wait queue instead. To make this work, a
new flag, NETFS_RREQ_RETRYING, is now set around the wait loop to tell
the wake-up code to wake up the wait queue rather than requeuing the
request's work item.
Note that this flag replaces the NETFS_RREQ_NEED_RETRY flag which is
no longer used.
(5) Whilst not strictly anything to do with the hang,
netfs_retry_read_subrequests() was also doubly incrementing the
subreq_counter and re-setting the debug index, leaving a gap in the
trace. This is also fixed.
One of these hangs was observed with 9p and with cifs. Others were forced
by manual code injection into fs/afs/file.c. Firstly, afs_prepare_read()
was created to provide an changing pattern of maximum subrequest sizes:
static int afs_prepare_read(struct netfs_io_subrequest *subreq)
{
struct netfs_io_request *rreq = subreq->rreq;
if (!S_ISREG(subreq->rreq->inode->i_mode))
return 0;
if (subreq->retry_count < 20)
rreq->io_streams[0].sreq_max_len =
umax(200, 2222 - subreq->retry_count * 40);
else
rreq->io_streams[0].sreq_max_len = 3333;
return 0;
}
and pointed to by afs_req_ops. Then the following:
struct netfs_io_subrequest *subreq = op->fetch.subreq;
if (subreq->error == 0 &&
S_ISREG(subreq->rreq->inode->i_mode) &&
subreq->retry_count < 20) {
subreq->transferred = subreq->already_done;
__clear_bit(NETFS_SREQ_HIT_EOF, &subreq->flags);
__set_bit(NETFS_SREQ_NEED_RETRY, &subreq->flags);
afs_fetch_data_notify(op);
return;
}
was inserted into afs_fetch_data_success() at the beginning and struct
netfs_io_subrequest given an extra field, "already_done" that was set to
the value in "subreq->transferred" by netfs_reissue_read().
When reading a 4K file, the subrequests would get gradually smaller, a new
subrequest would be allocated around the 3rd retry and then eventually be
rendered superfluous when the 20th retry was hit and the limit on the first
subrequest was eased.
Fixes:
|
||
|
Bart Van Assche
|
0ea163a18b |
scsi: usb: Rename the RESERVE and RELEASE constants
The names RESERVE and RELEASE are not only used in <scsi/scsi_proto.h> but also elsewhere in the kernel: $ git grep -nHE 'define[[:blank:]]*(RESERVE|RELEASE)[[:blank:]]' drivers/input/joystick/walkera0701.c:13:#define RESERVE 20000 drivers/s390/char/tape_std.h:56:#define RELEASE 0xD4 /* 3420 NOP, 3480 REJECT */ drivers/s390/char/tape_std.h:58:#define RESERVE 0xF4 /* 3420 NOP, 3480 REJECT */ Additionally, while the names of the symbolic constants RESERVE_10 and RELEASE_10 include the command length, the command length is not included in the RESERVE and RELEASE names. Address both issues by renaming the RESERVE and RELEASE constants into RESERVE_6 and RELEASE_6 respectively. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250210205031.2970833-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Paul E. McKenney
|
a8f7c9c457 |
rcu: Trace expedited grace-period numbers in hexadecimal
This commit reformats the expedited grace-period numbers into hexadecimal for easier decoding and comparison. The normal grace-period numbers remain in decimal for the time being. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> |
||
|
Vlastimil Babka
|
7f4b19ef31 |
rcu: remove trace_rcu_kvfree_callback
Tree RCU does not handle kvfree_rcu() by queueing individual objects by call_rcu() anymore, thus the tracepoint and associated __is_kvfree_rcu_offset() check is dead code now. Remove it. Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Tested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
David Howells
|
4241a702e0 |
rxrpc: Fix the rxrpc_connection attend queue handling
The rxrpc_connection attend queue is never used because conn::attend_link
is never initialised and so is always NULL'd out and thus always appears to
be busy. This requires the following fix:
(1) Fix this the attend queue problem by initialising conn::attend_link.
And, consequently, two further fixes for things masked by the above bug:
(2) Fix rxrpc_input_conn_event() to handle being invoked with a NULL
sk_buff pointer - something that can now happen with the above change.
(3) Fix the RXRPC_SKB_MARK_SERVICE_CONN_SECURED message to carry a pointer
to the connection and a ref on it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Fixes:
|
||
|
Linus Torvalds
|
6d61a53dd6 |
f2fs-for-6.14-rc1
In this series, there are several major improvements such as 1) folio conversion made by Matthew, 2) speed-up of block truncation, 3) caching more dentry pages. In addition, we implemented a linear dentry search to address recent unicode regression, and figured out some false alarms that we could get rid of. Enhancement: - foilio conversion in various IO paths - optimize f2fs_truncate_data_blocks_range() - cache more dentry pages - remove unnecessary blk_finish_plug - procfs: show mtime in segment_bits Bug fix: - introduce linear search for dentries - don't call block truncation for aliased file - fix using wrong 'submitted' value in f2fs_write_cache_pages - fix to do sanity check correctly on i_inline_xattr_size - avoid trying to get invalid block address - fix inconsistent dirty state of atomic file -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAmeYV/QACgkQQBSofoJI UNKsPg/+NzFrK/D5nFJ6t86T2XdngzESbI+gbydA8CrT7VoAw5Es0GTswnsStnqF DaWWiz9TYDTJWarKMklZ8zcGwcQGAPZqyg3X+eUPb2Rfr9DK80Twov5nfzai/ZVM iJQuT7vAqbgJnmF1caJYghuOuJpd43U1lK/CxEomXzBCGVJipvSa7Mzh9awUS0P+ luvTYjZXh3BISZDnqIbxVjZjcd6TKoBHVqKtz0JbrghVKJRXiVHr4IPnzUQ6hCE8 MvN07mfQJPyIrZV1jVX/syYKUgwS/QYAmeca/uFGoYO0cSn3qAhdn0PLWpQBIB+D ST2SIE9penLlhCb8zN4d6Q6LwEcOWIbtcXffsix3EBCQosKqrqznV0SJ+fjGjuuw kX3ICsidYzB8GeHtf6dgH8dRqP4kvYnDe6P0Ho6iuxCZPHWiVauthORuMqerXFNn 8hHtnGMqybGnT6Py51bt4qlxIgTVl3YO1643Ej8ihpCXJPoCmi6cTyK/M/KaZoaM 6YYeTZwWbPuCclLm+iVNUPs0asxESSBqHTXm+r9NkaExtmclFyQs1edZ/pYUihq2 CjvluyKVMuLVieU631am6X3H8sJsgepb8mjsJagtqF36DlCSW8jHgaqkl4gyi5m8 V4c3w2rmh8IssjTCXxEGtqRQ/Qdbabo9aiFcNa37t1ov7+6GzEk= =PEtq -----END PGP SIGNATURE----- Merge tag 'f2fs-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this series, there are several major improvements such as folio conversion by Matthew, speed-up of block truncation, and caching more dentry pages. In addition, we implemented a linear dentry search to address recent unicode regression, and figured out some false alarms that we could get rid of. Enhancements: - foilio conversion in various IO paths - optimize f2fs_truncate_data_blocks_range() - cache more dentry pages - remove unnecessary blk_finish_plug - procfs: show mtime in segment_bits Bug fixes: - introduce linear search for dentries - don't call block truncation for aliased file - fix using wrong 'submitted' value in f2fs_write_cache_pages - fix to do sanity check correctly on i_inline_xattr_size - avoid trying to get invalid block address - fix inconsistent dirty state of atomic file" * tag 'f2fs-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (32 commits) f2fs: fix inconsistent dirty state of atomic file f2fs: fix to avoid changing 'check only' behaior of recovery f2fs: Clean up the loop outside of f2fs_invalidate_blocks() f2fs: procfs: show mtime in segment_bits f2fs: fix to avoid return invalid mtime from f2fs_get_section_mtime() f2fs: Fix format specifier in sanity_check_inode() f2fs: avoid trying to get invalid block address f2fs: fix to do sanity check correctly on i_inline_xattr_size f2fs: remove blk_finish_plug f2fs: Optimize f2fs_truncate_data_blocks_range() f2fs: fix using wrong 'submitted' value in f2fs_write_cache_pages f2fs: add parameter @len to f2fs_invalidate_blocks() f2fs: update_sit_entry_for_release() supports consecutive blocks. f2fs: introduce update_sit_entry_for_release/alloc() f2fs: don't call block truncation for aliased file f2fs: Introduce linear search for dentries f2fs: add parameter @len to f2fs_invalidate_internal_cache() f2fs: expand f2fs_invalidate_compress_page() to f2fs_invalidate_compress_pages_range() f2fs: ensure that node info flags are always initialized f2fs: The GC triggered by ioctl also needs to mark the segno as victim ... |
||
|
Linus Torvalds
|
9c5968db9e |
The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs. - "Allocate and free frozen pages" from Matthew Wilcox reorganizes the page allocator so we end up with the ability to allocate and free zero-refcount pages. So that callers (ie, slab) can avoid a refcount inc & dec. - "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use large folios other than PMD-sized ones. - "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and fixes for this small built-in kernel selftest. - "mas_anode_descend() related cleanup" from Wei Yang tidies up part of the mapletree code. - "mm: fix format issues and param types" from Keren Sun implements a few minor code cleanups. - "simplify split calculation" from Wei Yang provides a few fixes and a test for the mapletree code. - "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes continues the work of moving vma-related code into the (relatively) new mm/vma.c. - "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David Hildenbrand cleans up and rationalizes handling of gfp flags in the page allocator. - "readahead: Reintroduce fix for improper RA window sizing" from Jan Kara is a second attempt at fixing a readahead window sizing issue. It should reduce the amount of unnecessary reading. - "synchronously scan and reclaim empty user PTE pages" from Qi Zheng addresses an issue where "huge" amounts of pte pagetables are accumulated (https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/). Qi's series addresses this windup by synchronously freeing PTE memory within the context of madvise(MADV_DONTNEED). - "selftest/mm: Remove warnings found by adding compiler flags" from Muhammad Usama Anjum fixes some build warnings in the selftests code when optional compiler warnings are enabled. - "mm: don't use __GFP_HARDWALL when migrating remote pages" from David Hildenbrand tightens the allocator's observance of __GFP_HARDWALL. - "pkeys kselftests improvements" from Kevin Brodsky implements various fixes and cleanups in the MM selftests code, mainly pertaining to the pkeys tests. - "mm/damon: add sample modules" from SeongJae Park enhances DAMON to estimate application working set size. - "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn provides some cleanups to memcg's hugetlb charging logic. - "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based kernel build was demonstrated. - "zram: split page type read/write handling" from Sergey Senozhatsky has several fixes and cleaups for zram in the area of zram_write_page(). A watchdog softlockup warning was eliminated. - "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky cleans up the pagetable destructor implementations. A rare use-after-free race is fixed. - "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes simplifies and cleans up the debugging code in the VMA merging logic. - "Account page tables at all levels" from Kevin Brodsky cleans up and regularizes the pagetable ctor/dtor handling. This results in improvements in accounting accuracy. - "mm/damon: replace most damon_callback usages in sysfs with new core functions" from SeongJae Park cleans up and generalizes DAMON's sysfs file interface logic. - "mm/damon: enable page level properties based monitoring" from SeongJae Park increases the amount of information which is presented in response to DAMOS actions. - "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs is completed. - "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter Xu cleans up and generalizes the hugetlb reservation accounting. - "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino removes a never-used feature of the alloc_pages_bulk() interface. - "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park extends DAMOS filters to support not only exclusion (rejecting), but also inclusion (allowing) behavior. - "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi "introduces a new memory descriptor for zswap.zpool that currently overlaps with struct page for now. This is part of the effort to reduce the size of struct page and to enable dynamic allocation of memory descriptors." - "mm, swap: rework of swap allocator locks" from Kairui Song redoes and simplifies the swap allocator locking. A speedup of 400% was demonstrated for one workload. As was a 35% reduction for kernel build time with swap-on-zram. - "mm: update mips to use do_mmap(), make mmap_region() internal" from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that mmap_region() can be made MM-internal. - "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU regressions and otherwise improves MGLRU performance. - "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park updates DAMON documentation. - "Cleanup for memfd_create()" from Isaac Manjarres does that thing. - "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand provides various cleanups in the areas of hugetlb folios, THP folios and migration. - "Uncached buffered IO" from Jens Axboe implements the new RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache reading and writing. To permite userspace to address issues with massive buildup of useless pagecache when reading/writing fast devices. - "selftests/mm: virtual_address_range: Reduce memory" from Thomas Weißschuh fixes and optimizes some of the MM selftests. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5a+cwAKCRDdBJ7gKXxA jtoyAP9R58oaOKPJuTizEKKXvh/RpMyD6sYcz/uPpnf+cKTZxQEAqfVznfWlw/Lz uC3KRZYhmd5YrxU4o+qjbzp9XWX/xAE= =Ib2s -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "The various patchsets are summarized below. Plus of course many indivudual patches which are described in their changelogs. - "Allocate and free frozen pages" from Matthew Wilcox reorganizes the page allocator so we end up with the ability to allocate and free zero-refcount pages. So that callers (ie, slab) can avoid a refcount inc & dec - "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use large folios other than PMD-sized ones - "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and fixes for this small built-in kernel selftest - "mas_anode_descend() related cleanup" from Wei Yang tidies up part of the mapletree code - "mm: fix format issues and param types" from Keren Sun implements a few minor code cleanups - "simplify split calculation" from Wei Yang provides a few fixes and a test for the mapletree code - "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes continues the work of moving vma-related code into the (relatively) new mm/vma.c - "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David Hildenbrand cleans up and rationalizes handling of gfp flags in the page allocator - "readahead: Reintroduce fix for improper RA window sizing" from Jan Kara is a second attempt at fixing a readahead window sizing issue. It should reduce the amount of unnecessary reading - "synchronously scan and reclaim empty user PTE pages" from Qi Zheng addresses an issue where "huge" amounts of pte pagetables are accumulated: https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/ Qi's series addresses this windup by synchronously freeing PTE memory within the context of madvise(MADV_DONTNEED) - "selftest/mm: Remove warnings found by adding compiler flags" from Muhammad Usama Anjum fixes some build warnings in the selftests code when optional compiler warnings are enabled - "mm: don't use __GFP_HARDWALL when migrating remote pages" from David Hildenbrand tightens the allocator's observance of __GFP_HARDWALL - "pkeys kselftests improvements" from Kevin Brodsky implements various fixes and cleanups in the MM selftests code, mainly pertaining to the pkeys tests - "mm/damon: add sample modules" from SeongJae Park enhances DAMON to estimate application working set size - "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn provides some cleanups to memcg's hugetlb charging logic - "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based kernel build was demonstrated - "zram: split page type read/write handling" from Sergey Senozhatsky has several fixes and cleaups for zram in the area of zram_write_page(). A watchdog softlockup warning was eliminated - "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky cleans up the pagetable destructor implementations. A rare use-after-free race is fixed - "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes simplifies and cleans up the debugging code in the VMA merging logic - "Account page tables at all levels" from Kevin Brodsky cleans up and regularizes the pagetable ctor/dtor handling. This results in improvements in accounting accuracy - "mm/damon: replace most damon_callback usages in sysfs with new core functions" from SeongJae Park cleans up and generalizes DAMON's sysfs file interface logic - "mm/damon: enable page level properties based monitoring" from SeongJae Park increases the amount of information which is presented in response to DAMOS actions - "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs is completed - "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter Xu cleans up and generalizes the hugetlb reservation accounting - "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino removes a never-used feature of the alloc_pages_bulk() interface - "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park extends DAMOS filters to support not only exclusion (rejecting), but also inclusion (allowing) behavior - "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi introduces a new memory descriptor for zswap.zpool that currently overlaps with struct page for now. This is part of the effort to reduce the size of struct page and to enable dynamic allocation of memory descriptors - "mm, swap: rework of swap allocator locks" from Kairui Song redoes and simplifies the swap allocator locking. A speedup of 400% was demonstrated for one workload. As was a 35% reduction for kernel build time with swap-on-zram - "mm: update mips to use do_mmap(), make mmap_region() internal" from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that mmap_region() can be made MM-internal - "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU regressions and otherwise improves MGLRU performance - "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park updates DAMON documentation - "Cleanup for memfd_create()" from Isaac Manjarres does that thing - "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand provides various cleanups in the areas of hugetlb folios, THP folios and migration - "Uncached buffered IO" from Jens Axboe implements the new RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache reading and writing. To permite userspace to address issues with massive buildup of useless pagecache when reading/writing fast devices - "selftests/mm: virtual_address_range: Reduce memory" from Thomas Weißschuh fixes and optimizes some of the MM selftests" * tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits) mm/compaction: fix UBSAN shift-out-of-bounds warning s390/mm: add missing ctor/dtor on page table upgrade kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() tools: add VM_WARN_ON_VMG definition mm/damon/core: use str_high_low() helper in damos_wmark_wait_us() seqlock: add missing parameter documentation for raw_seqcount_try_begin() mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh mm/page_alloc: remove the incorrect and misleading comment zram: remove zcomp_stream_put() from write_incompressible_page() mm: separate move/undo parts from migrate_pages_batch() mm/kfence: use str_write_read() helper in get_access_type() selftests/mm/mkdirty: fix memory leak in test_uffdio_copy() kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags() selftests/mm: virtual_address_range: avoid reading from VM_IO mappings selftests/mm: vm_util: split up /proc/self/smaps parsing selftests/mm: virtual_address_range: unmap chunks after validation selftests/mm: virtual_address_range: mmap() without PROT_WRITE selftests/memfd/memfd_test: fix possible NULL pointer dereference mm: add FGP_DONTCACHE folio creation flag mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue ... |
||
|
Linus Torvalds
|
40648d246f |
rv: tools/rtla: Updates for 6.14
- Add a test suite to test the tool
Add a small test suite that can be used to test rtla's basic features to
at least have something to test when applying changes.
- Automate manual steps in monitor creation
While creating a new monitor in RV, besides generating code from dot2k,
there are a few manual steps which can be tedious and error prone, like
adding the tracepoints, makefile lines and kconfig, or selecting events
that start the monitor in the initial state.
Updates were made to try and automate as much as possible among those steps to
make creating a new RV monitor much quicker. It is still requires to
select proper tracepoints, this step is harder to automate in a general
way and, in several cases, would still need user intervention.
- Have rtla timerlat hist and top set OSNOISE_WORKLOAD flag
Have both rtla-timerlat-hist and rtla-timerlat-top set OSNOISE_WORKLOAD to
the proper value ("on" when running with -k, "off" when running with -u)
every time the option is available instead of setting it only when running
with -u.
This prevents rtla timerlat -k from giving no results when
NO_OSNOISE_WORKLOAD is set, either manually or by an abnormally exited earlier
run of rtla timerlat -u.
- Stop rtla timerlat on signal properly when overloaded
There is an issue where if rtla is run on machines with a high number of
CPUs (100+), timerlat can generate more samples than rtla is able to process
via tracefs_iterate_raw_events. This is especially common when the interval
is set to 100us (rteval and cyclictest default) as opposed to the rtla
default of 1000us, but also happens with the rtla default.
Currently, this leads to rtla hanging and having to be terminated with
SIGTERM. SIGINT setting stop_tracing is not enough, since more and more
events are coming and tracefs_iterate_raw_events never exits.
To fix this: Stop the timerlat tracer on SIGINT/SIGALRM to ensure no more
events are generated when rtla is supposed to exit.
Also on receiving SIGINT/SIGALRM twice, abort iteration immediately with
tracefs_iterate_stop, making rtla exit right away instead of waiting for all
events to be processed.
- Account for missed events
Due to tracefs buffer overflow, it can happen that rtla misses events,
making the tracing results inaccurate.
Count both the number of missed events and the total number of processed
events, and display missed events as well as their percentage. The numbers
are displayed for both osnoise and timerlat, even though for the earlier,
missed events are generally not expected.
For hist, the number is displayed at the end of the run; for top, it is
displayed on each printing of the top table.
- Changes to make osnoise more robust
There was a dependency in the code that the first field of the
osnoise_tool structure was the trace field. If that that ever changed,
then the code work break. Change the code to encapsulate this dependency
where the code that uses the structure does not have this dependency.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5UQ4BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qktFAQD2px6MyoOVTssB5Iw3aTWGUfTFoDEc
bfng5JsBxlVJkQEA+2UUvP8FJlLTOQvVEwJiscX7CCJxl5bYkV6GWuGRxQU=
=h//9
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rv and tools/rtla updates from Steven Rostedt:
- Add a test suite to test the tool
Add a small test suite that can be used to test rtla's basic features
to at least have something to test when applying changes.
- Automate manual steps in monitor creation
While creating a new monitor in RV, besides generating code from
dot2k, there are a few manual steps which can be tedious and error
prone, like adding the tracepoints, makefile lines and kconfig, or
selecting events that start the monitor in the initial state.
Updates were made to try and automate as much as possible among those
steps to make creating a new RV monitor much quicker. It is still
requires to select proper tracepoints, this step is harder to
automate in a general way and, in several cases, would still need
user intervention.
- Have rtla timerlat hist and top set OSNOISE_WORKLOAD flag
Have both rtla-timerlat-hist and rtla-timerlat-top set
OSNOISE_WORKLOAD to the proper value ("on" when running with -k,
"off" when running with -u) every time the option is available
instead of setting it only when running with -u.
This prevents rtla timerlat -k from giving no results when
NO_OSNOISE_WORKLOAD is set, either manually or by an abnormally
exited earlier run of rtla timerlat -u.
- Stop rtla timerlat on signal properly when overloaded
There is an issue where if rtla is run on machines with a high number
of CPUs (100+), timerlat can generate more samples than rtla is able
to process via tracefs_iterate_raw_events. This is especially common
when the interval is set to 100us (rteval and cyclictest default) as
opposed to the rtla default of 1000us, but also happens with the rtla
default.
Currently, this leads to rtla hanging and having to be terminated
with SIGTERM. SIGINT setting stop_tracing is not enough, since more
and more events are coming and tracefs_iterate_raw_events never
exits.
To fix this: Stop the timerlat tracer on SIGINT/SIGALRM to ensure no
more events are generated when rtla is supposed to exit.
Also on receiving SIGINT/SIGALRM twice, abort iteration immediately
with tracefs_iterate_stop, making rtla exit right away instead of
waiting for all events to be processed.
- Account for missed events
Due to tracefs buffer overflow, it can happen that rtla misses
events, making the tracing results inaccurate.
Count both the number of missed events and the total number of
processed events, and display missed events as well as their
percentage. The numbers are displayed for both osnoise and timerlat,
even though for the earlier, missed events are generally not
expected.
For hist, the number is displayed at the end of the run; for top, it
is displayed on each printing of the top table.
- Changes to make osnoise more robust
There was a dependency in the code that the first field of the
osnoise_tool structure was the trace field. If that that ever
changed, then the code work break. Change the code to encapsulate
this dependency where the code that uses the structure does not have
this dependency.
* tag 'trace-tools-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits)
rtla: Report missed event count
rtla: Add function to report missed events
rtla: Count all processed events
rtla: Count missed trace events
tools/rtla: Add osnoise_trace_is_off()
rtla/timerlat_top: Set OSNOISE_WORKLOAD for kernel threads
rtla/timerlat_hist: Set OSNOISE_WORKLOAD for kernel threads
rtla/osnoise: Distinguish missing workload option
rtla/timerlat_top: Abort event processing on second signal
rtla/timerlat_hist: Abort event processing on second signal
rtla/timerlat_top: Stop timerlat tracer on signal
rtla/timerlat_hist: Stop timerlat tracer on signal
rtla: Add trace_instance_stop
tools/rtla: Add basic test suite
verification/dot2k: Implement event type detection
verification/dot2k: Auto patch current kernel source
verification/dot2k: Simplify manual steps in monitor creation
rv: Simplify manual steps in monitor creation
verification/dot2k: Add support for name and description options
verification/dot2k: More robust template variables
...
|
||
|
Jens Axboe
|
cceba6f7e4 |
mm: add PG_dropbehind folio flag
Add a folio flag that file IO can use to indicate that the cached IO being done should be dropped from the page cache upon completion. Link: https://lkml.kernel.org/r/20241220154831.1086649-5-axboe@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Brian Foster <bfoster@redhat.com> Cc: Chris Mason <clm@meta.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
754916d4a2 |
capabilities patches for 6.14-rc1
This branch contains basically the same two patches as last time:
1. A patch by Paul Moore to remove the cap_mmap_file() hook, as it simply
returned the default return value and so doesn't need to exist.
2. A patch by Jordan Rome to add a trace event for cap_capable(), updated
to address your feedback during the last cycle.
Both patches have been sitting in linux-next since 6.13-rc1 with no
issues.
Signed-off-by: Serge E. Hallyn <serge@hallyn.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEqb0/8XByttt4D8+UNXDaFycKziQFAmeOxO0ACgkQNXDaFycK
ziSbqwf9FmQbCG9zpgHhAaODz8GXPn1EYm0TfabbfuG+hRvTQLt/7eVuLB6Tt69l
lx7zM8HUjZLQW8qsDc1nmdnrvvLK6z8e97yGBBMG4uzFyzsCgNQowyDRz69IOG+l
eTCUMXOQXYtO4OYm7pECBeUos8yCOpW7vdZzyyKInw0A8JXy98K880HlYoiYc7wI
9xXtKWTmqry156llwIYU/opo/Pag480Y2hzP9x5EqvTNqJ/iMEUb2Dswhf+53dOY
HePwerTu1BYYupSC2gl3ujl/m6R2BroLBmOMApLiAhNtRZCm+J6rkhmMW9cFqyxZ
Nyw8nAuc08cAKoobAdggD+cgFy9e6g==
=WKYe
-----END PGP SIGNATURE-----
Merge tag 'caps-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux
Pull capabilities updates from Serge Hallyn:
- remove the cap_mmap_file() hook, as it simply returned the default
return value and so doesn't need to exist (Paul Moore)
- add a trace event for cap_capable() (Jordan Rome)
* tag 'caps-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux:
security: add trace event for cap_capable
capabilities: remove cap_mmap_file()
|
||
|
Linus Torvalds
|
5ab889facc |
hardening updates for v6.14-rc1
- stackleak: Use str_enabled_disabled() helper (Thorsten Blum) - Document GCC INIT_STACK_ALL_PATTERN behavior (Geert Uytterhoeven) - Add task_prctl_unknown tracepoint (Marco Elver) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ4hR6QAKCRA2KwveOeQk uyYrAP90cNcedNxKCIC/XfIEyS5bWqgAcEcOdLwsPQ8X130M7wEAwadkKaO7PwrF 8T3ynXxUd4z5OyuXjKQvfvPAgaxhbg4= =OoiS -----END PGP SIGNATURE----- Merge tag 'hardening-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - stackleak: Use str_enabled_disabled() helper (Thorsten Blum) - Document GCC INIT_STACK_ALL_PATTERN behavior (Geert Uytterhoeven) - Add task_prctl_unknown tracepoint (Marco Elver) * tag 'hardening-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: hardening: Document INIT_STACK_ALL_PATTERN behavior with GCC stackleak: Use str_enabled_disabled() helper in stack_erasing_sysctl() tracing: Remove pid in task_rename tracing output tracing: Add task_prctl_unknown tracepoint |
||
|
Linus Torvalds
|
0ad9617c78 |
Networking changes for 6.14.
Core
----
- More core refactoring to reduce the RTNL lock contention,
including preparatory work for the per-network namespace RTNL lock,
replacing RTNL lock with a per device-one to protect NAPI-related
net device data and moving synchronize_net() calls outside such
lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and
more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter
---------
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on
each restart.
Protocols
---------
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets,
to avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel
TLS (for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API
----------
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling
-----------------
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec,
to ease maintenance and future development.
- Add YNL support for decoding the link types used in net
self-tests, allowing a single build to run both net and
drivers/net.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues, affecting
both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station mode
support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hrsp
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
|
||
|
Linus Torvalds
|
96c84703f1 |
drm next for 6.14-rc1
core: - device memory cgroup controller added - Remove driver date from drm_driver - Add drm_printer based hex dumper - drm memory stats docs update - scheduler documentation improvements new driver: - amdxdna - Ryzen AI NPU support connector: - add a mutex to protect ELD - make connector setup two-step panels: - Introduce backlight quirks infrastructure - New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00, - Multi-Inno Technology MI1010Z1T-1CP11 bridge: - ti-sn65dsi83: Add ti,lvds-vod-swing optional properties - Provide default implementation of atomic_check for HDMI bridges - it605: HDCP improvements, MCCS Support xe: - make OA buffer size configurable - GuC capture fixes - add ufence and g2h flushes - restore system memory GGTT mappings - ioctl fixes - SRIOV PF scheduling priority - allow fault injection - lots of improvements/refactors - Enable GuC's WA_DUAL_QUEUE for newer platforms - IRQ related fixes and improvements i915: - More accurate engine busyness metrics with GuC submission - Ensure partial BO segment offset never exceeds allowed max - Flush GuC CT receive tasklet during reset preparation - Some DG2 refactor to fix DG2 bugs when operating with certain CPUs - Fix DG1 power gate sequence - Enabling uncompressed 128b/132b UHBR SST - Handle hdmi connector init failures, and no HDMI/DP cases - More robust engine resets on Haswell and older i915/xe display: - HDCP fixes for Xe3Lpd - New GSC FW ARL-H/ARL-U - support 3 VDSC engines 12 slices - MBUS joining sanitisation - reconcile i915/xe display power mgmt - Xe3Lpd fixes - UHBR rates for Thunderbolt amdgpu: - DRM panic support - track BO memory stats at runtime - Fix max surface handling in DC - Cleaner shader support for gfx10.3 dGPUs - fix drm buddy trim handling - SDMA engine reset updates - Fix doorbell ttm cleanup - RAS updates - ISP updates - SDMA queue reset support - Rework DPM powergating interfaces - Documentation updates and cleanups - DCN 3.5 updates - Use a pm notifier to more gracefully handle VRAM eviction on suspend or hibernate - Add debugfs interfaces for forcing scheduling to specific engine instances - GG 9.5 updates - IH 4.4 updates - Make missing optional firmware less noisy - PSP 13.x updates - SMU 13.x updates - VCN 5.x updates - JPEG 5.x updates - GC 12.x updates - DC FAMS updates amdkfd: - GG 9.5 updates - Logging improvements - Shader debugger fixes - Trap handler cleanup - Cleanup includes - Eviction fence wq fix msm: - MDSS: - properly described UBWC registers - added SM6150 (aka QCS615) support - DPU: - added SM6150 (aka QCS615) support - enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane) - added CWB hardware blocks support - DSI: - added SM6150 (aka QCS615) support - GPU: - Print GMU core fw version - GMU bandwidth voting for a740 and a750 - Expose uche trap base via uapi - UAPI error reporting rcar-du: - Add r8a779h0 Support ivpu: - Fix qemu crash when using passthrough nouveau: - expose GSP-RM logging buffers via debugfs panfrost: - Add MT8188 Mali-G57 MC3 support rockchip: - Gamma LUT support hisilicon: - new HIBMC support virtio-gpu: - convert to helpers - add prime support for scanout buffers v3d: - Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL vc4: - Add support for BCM2712 vkms: - line-per-line compositing algorithm to improve performance zynqmp: - Add DP audio support mediatek: - dp: Add sdp path reset - dp: Support flexible length of DP calibration data etnaviv: - add fdinfo memory support - add explicit reset handling -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmeJ5qYACgkQDHTzWXnE hr4o+w/9EbijDfyf8GCj4Qaxov8nZ3KEMW8LLmrYO3epfLsniX+nv01oNdbRXBjl QcsKixAvkyfLl61RuPnwbYiSJfxgwZ5K8rke7cshwlMB7zl7xZ+GZRoAmJlnokS4 uhmclCriW5nfKRNAGUPcj/ReGZeyHwqvGZn3jyuShkIFpE4rDope4DQsTzm/zs/i +cKyRAFm86EIdTACr9DVtb1L5uNZOnHDkufRH5EZr/7CWFco1krLxb/r4cvFaiIO GiDaLvXKXKwzQ6NeIWWCEU2zTBz0BluI8ggxp1+WlDiYgLDWtCBpBNPAoNJO/iQS J+E8bsk2b/aCLSJQgxcK0y80CXpoJyALaqStdHUqxuWv3/o0g8lFUJlfJVCNPIsg o4mBkdbgkzkHCPxUbie7uQIx+2DIsEiwWC/YGBeRx49qEYsLWyFHf6JR8j9aHCQq eGanaubzR+W2AC81yktd3rcxpmX5kq8n6ax3ZtS9wnio8iyB5jBDM8QeFSAE/vXV B5TT1nneh+HXJ6bTwZBFXkiq2JRxUdbZIS5oQLh0zixVthBMISSsYhJ222nH1bC4 DWIS2ggqSgqkb0WsE29CJyhJ1fPmS3v7lBXqPvjmN5vMto4gGOJAEgT6CiDpGFIz zXzNfrirr1r95iSST4PnYVOOkfK3t9gvbWMXgkr0wygtxyoxHzk= =5FIc -----END PGP SIGNATURE----- Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "There are two external interactions of note, the msm tree pull in some opp tree, hopefully the opp tree arrives from the same git tree however it normally does. There is also a new cgroup controller for device memory, that is used by drm, so is merging through my tree. This will hopefully help open up gpu cgroup usage a bit more and move us forward. There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs. Then the usual xe/amdgpu/i915/msm leaders and lots of changes and refactors across the board: core: - device memory cgroup controller added - Remove driver date from drm_driver - Add drm_printer based hex dumper - drm memory stats docs update - scheduler documentation improvements new driver: - amdxdna - Ryzen AI NPU support connector: - add a mutex to protect ELD - make connector setup two-step panels: - Introduce backlight quirks infrastructure - New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00, - Multi-Inno Technology MI1010Z1T-1CP11 bridge: - ti-sn65dsi83: Add ti,lvds-vod-swing optional properties - Provide default implementation of atomic_check for HDMI bridges - it605: HDCP improvements, MCCS Support xe: - make OA buffer size configurable - GuC capture fixes - add ufence and g2h flushes - restore system memory GGTT mappings - ioctl fixes - SRIOV PF scheduling priority - allow fault injection - lots of improvements/refactors - Enable GuC's WA_DUAL_QUEUE for newer platforms - IRQ related fixes and improvements i915: - More accurate engine busyness metrics with GuC submission - Ensure partial BO segment offset never exceeds allowed max - Flush GuC CT receive tasklet during reset preparation - Some DG2 refactor to fix DG2 bugs when operating with certain CPUs - Fix DG1 power gate sequence - Enabling uncompressed 128b/132b UHBR SST - Handle hdmi connector init failures, and no HDMI/DP cases - More robust engine resets on Haswell and older i915/xe display: - HDCP fixes for Xe3Lpd - New GSC FW ARL-H/ARL-U - support 3 VDSC engines 12 slices - MBUS joining sanitisation - reconcile i915/xe display power mgmt - Xe3Lpd fixes - UHBR rates for Thunderbolt amdgpu: - DRM panic support - track BO memory stats at runtime - Fix max surface handling in DC - Cleaner shader support for gfx10.3 dGPUs - fix drm buddy trim handling - SDMA engine reset updates - Fix doorbell ttm cleanup - RAS updates - ISP updates - SDMA queue reset support - Rework DPM powergating interfaces - Documentation updates and cleanups - DCN 3.5 updates - Use a pm notifier to more gracefully handle VRAM eviction on suspend or hibernate - Add debugfs interfaces for forcing scheduling to specific engine instances - GG 9.5 updates - IH 4.4 updates - Make missing optional firmware less noisy - PSP 13.x updates - SMU 13.x updates - VCN 5.x updates - JPEG 5.x updates - GC 12.x updates - DC FAMS updates amdkfd: - GG 9.5 updates - Logging improvements - Shader debugger fixes - Trap handler cleanup - Cleanup includes - Eviction fence wq fix msm: - MDSS: - properly described UBWC registers - added SM6150 (aka QCS615) support - DPU: - added SM6150 (aka QCS615) support - enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane) - added CWB hardware blocks support - DSI: - added SM6150 (aka QCS615) support - GPU: - Print GMU core fw version - GMU bandwidth voting for a740 and a750 - Expose uche trap base via uapi - UAPI error reporting rcar-du: - Add r8a779h0 Support ivpu: - Fix qemu crash when using passthrough nouveau: - expose GSP-RM logging buffers via debugfs panfrost: - Add MT8188 Mali-G57 MC3 support rockchip: - Gamma LUT support hisilicon: - new HIBMC support virtio-gpu: - convert to helpers - add prime support for scanout buffers v3d: - Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL vc4: - Add support for BCM2712 vkms: - line-per-line compositing algorithm to improve performance zynqmp: - Add DP audio support mediatek: - dp: Add sdp path reset - dp: Support flexible length of DP calibration data etnaviv: - add fdinfo memory support - add explicit reset handling" * tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits) drm/bridge: fix documentation for the hdmi_audio_prepare() callback doc/cgroup: Fix title underline length drm/doc: Include new drm-compute documentation cgroup/dmem: Fix parameters documentation cgroup/dmem: Select PAGE_COUNTER kernel/cgroup: Remove the unused variable climit drm/display: hdmi: Do not read EDID on disconnected connectors drm/tests: hdmi: Add connector disablement test drm/connector: hdmi: Do atomic check when necessary drm/amd/display: 3.2.316 drm/amd/display: avoid reset DTBCLK at clock init drm/amd/display: improve dpia pre-train drm/amd/display: Apply DML21 Patches drm/amd/display: Use HW lock mgr for PSR1 drm/amd/display: Revised for Replay Pseudo vblank control drm/amd/display: Add a new flag for replay low hz drm/amd/display: Remove unused read_ono_state function from Hwss module drm/amd/display: Do not elevate mem_type change to full update drm/amd/display: Do not wait for PSR disable on vbl enable drm/amd/display: Remove unnecessary eDP power down ... |
||
|
Linus Torvalds
|
0eb4aaa230 |
for-6.14-tag
-----BEGIN PGP SIGNATURE-----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=SXLv
-----END PGP SIGNATURE-----
Merge tag 'for-6.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible changes, features:
- rebuilding of the free space tree at mount time is done in more
transactions, fix potential hangs when the transaction thread is
blocked due to large amount of block groups
- more read IO balancing strategies (experimental config), add two
new ways how to select a device for read if the profiles allow that
(all RAID1*), the current default selects the device by pid which
is good on average but less performant for single reader workloads
- select preferred device for all reads (namely for testing)
- round-robin, balance reads across devices relevant for the
requested IO range
- add encoded write ioctl support to io_uring (read was added in
6.12), basis for writing send stream using that instead of
syscalls, non-blocking mode is not yet implemented
- support FS_IOC_READ_VERITY_METADATA, applications can use the
metadata to do their own verification
- pass inode's i_write_hint to bios, for parity with other
filesystems, ioctls F_GET_RW_HINT/F_SET_RW_HINT
Core:
- in zoned mode: allow to directly reclaim a block group by simply
resetting it, then it can be reused and another block group does
not need to be allocated
- super block validation now also does more comprehensive sys array
validation, adding it to the points where superblock is validated
(post-read, pre-write)
- subpage mode fixes:
- fix double accounting of blocks due to some races
- improved or fixed error handling in a few cases (compression,
delalloc)
- raid stripe tree:
- fix various cases with extent range splitting or deleting
- implement hole punching to extent range
- reduce number of stripe tree lookups during bio submission
- more self-tests
- updated self-tests (delayed refs)
- error handling improvements
- cleanups, refactoring
- remove rest of backref caching infrastructure from relocation,
not needed anymore
- error message updates
- remove unnecessary calls when extent buffer was marked dirty
- unused parameter removal
- code moved to new files
Other code changes: add rb_find_add_cached() to the rb-tree API"
* tag 'for-6.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (127 commits)
btrfs: selftests: add a selftest for deleting two out of three extents
btrfs: selftests: add test for punching a hole into 3 RAID stripe-extents
btrfs: selftests: add selftest for punching holes into the RAID stripe extents
btrfs: selftests: test RAID stripe-tree deletion spanning two items
btrfs: selftests: don't split RAID extents in half
btrfs: selftests: check for correct return value of failed lookup
btrfs: don't use btrfs_set_item_key_safe on RAID stripe-extents
btrfs: implement hole punching for RAID stripe extents
btrfs: fix deletion of a range spanning parts two RAID stripe extents
btrfs: fix tail delete of RAID stripe-extents
btrfs: fix front delete range calculation for RAID stripe extents
btrfs: assert RAID stripe-extent length is always greater than 0
btrfs: don't try to delete RAID stripe-extents if we don't need to
btrfs: selftests: correct RAID stripe-tree feature flag setting
btrfs: add io_uring interface for encoded writes
btrfs: remove the unused locked_folio parameter from btrfs_cleanup_ordered_extents()
btrfs: add extra error messages for delalloc range related errors
btrfs: subpage: dump the involved bitmap when ASSERT() failed
btrfs: subpage: fix the bitmap dump of the locked flags
btrfs: do proper folio cleanup when run_delalloc_nocow() failed
...
|
||
|
Linus Torvalds
|
b971424b6e |
vfs-6.14-rc1.afs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ4pS3AAKCRCRxhvAZXjc
okSwAPkB8Ra+oTplB/yzmab5kFB0+IUSHAiBfG6TCYb45op7wgEAs4+ignZkb+Bi
PsrfV7soiTGNUYSDVKOw7LS6PJEzkgA=
=3mcq
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.14-rc1.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull afs updates from Christian Brauner:
"Dynamic root improvements:
- Create an /afs/.<cell> mountpoint to match the /afs/<cell>
mountpoint when a cell is created
- Add some more checks on cell names proposed by the user to prevent
dodgy symlink bodies from being created. Also prevent rootcell from
being altered once set to simplify the locking
- Change the handling of /afs/@cell from being a dentry name
substitution at lookup time to making it a symlink to the current
cell name and also provide a /afs/.@cell symlink to point to the
dotted cell mountpoint
Fixes:
- Fix the abort code check in the fallback handling for the
YFS.RemoveFile2 RPC call
- Use call->op->server() for oridnary filesystem RPC calls that have
an operation descriptor instead of call->server()"
* tag 'vfs-6.14-rc1.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Fix the fallback handling for the YFS.RemoveFile2 RPC call
afs: Make /afs/@cell and /afs/.@cell symlinks
afs: Add rootcell checks
afs: Make /afs/.<cell> as well as /afs/<cell> mountpoints
|
||
|
Linus Torvalds
|
ca56a74a31 |
vfs-6.14-rc1.netfs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ4pRKQAKCRCRxhvAZXjc
ov2dAQCULWjTBWdF8Ro2bfNeXzWvUUnSPjoLJ9B4xlrOB9c2MAEAiwkKHkzAxUco
hCvaRJc3H2ze2wrgbIABPKB2noQVVwk=
=4ojv
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.14-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs netfs updates from Christian Brauner:
"This contains read performance improvements and support for monolithic
single-blob objects that have to be read/written as such (e.g. AFS
directory contents). The implementation of the two parts is interwoven
as each makes the other possible.
- Read performance improvements
The read performance improvements are intended to speed up some
loss of performance detected in cifs and to a lesser extend in afs.
The problem is that we queue too many work items during the
collection of read results: each individual subrequest is collected
by its own work item, and then they have to interact with each
other when a series of subrequests don't exactly align with the
pattern of folios that are being read by the overall request.
Whilst the processing of the pages covered by individual
subrequests as they complete potentially allows folios to be woken
in parallel and with minimum delay, it can shuffle wakeups for
sequential reads out of order - and that is the most common I/O
pattern.
The final assessment and cleanup of an operation is then held up
until the last I/O completes - and for a synchronous sequential
operation, this means the bouncing around of work items just adds
latency.
Two changes have been made to make this work:
(1) All collection is now done in a single "work item" that works
progressively through the subrequests as they complete (and
also dispatches retries as necessary).
(2) For readahead and AIO, this work item be done on a workqueue
and can run in parallel with the ultimate consumer of the data;
for synchronous direct or unbuffered reads, the collection is
run in the application thread and not offloaded.
Functions such as smb2_readv_callback() then just tell netfslib
that the subrequest has terminated; netfslib does a minimal bit of
processing on the spot - stat counting and tracing mostly - and
then queues/wakes up the worker. This simplifies the logic as the
collector just walks sequentially through the subrequests as they
complete and walks through the folios, if buffered, unlocking them
as it goes. It also keeps to a minimum the amount of latency
injected into the filesystem's low-level I/O handling
The way netfs supports filesystems using the deprecated
PG_private_2 flag is changed: folios are flagged and added to a
write request as they complete and that takes care of scheduling
the writes to the cache. The originating read request can then just
unlock the pages whatever happens.
- Single-blob object support
Single-blob objects are files for which the content of the file
must be read from or written to the server in a single operation
because reading them in parts may yield inconsistent results. AFS
directories are an example of this as there exists the possibility
that the contents are generated on the fly and would differ between
reads or might change due to third party interference.
Such objects will be written to and retrieved from the cache if one
is present, though we allow/may need to propose multiple
subrequests to do so. The important part is that read from/write to
the *server* is monolithic.
Single blob reading is, for the moment, fully synchronous and does
result collection in the application thread and, also for the
moment, the API is supplied the buffer in the form of a folio_queue
chain rather than using the pagecache.
- Related afs changes
This series makes a number of changes to the kafs filesystem,
primarily in the area of directory handling:
- AFS's FetchData RPC reply processing is made partially
asynchronous which allows the netfs_io_request's outstanding
operation counter to be removed as part of reducing the
collection to a single work item.
- Directory and symlink reading are plumbed through netfslib using
the single-blob object API and are now cacheable with fscache.
This also allows the afs_read struct to be eliminated and
netfs_io_subrequest to be used directly instead.
- Directory and symlink content are now stored in a folio_queue
buffer rather than in the pagecache. This means we don't require
the RCU read lock and xarray iteration to access it, and folios
won't randomly disappear under us because the VM wants them
back.
- The vnode operation lock is changed from a mutex struct to a
private lock implementation. The problem is that the lock now
needs to be dropped in a separate thread and mutexes don't
permit that.
- When a new directory or symlink is created, we now initialise it
locally and mark it valid rather than downloading it (we know
what it's likely to look like).
- We now use the in-directory hashtable to reduce the number of
entries we need to scan when doing a lookup. The edit routines
have to maintain the hash chains.
- Cancellation (e.g. by signal) of an async call after the
rxrpc_call has been set up is now offloaded to the worker thread
as there will be a notification from rxrpc upon completion. This
avoids a double cleanup.
- A "rolling buffer" implementation is created to abstract out the
two separate folio_queue chaining implementations I had (one for
read and one for write).
- Functions are provided to create/extend a buffer in a folio_queue
chain and tear it down again.
This is used to handle AFS directories, but could also be used to
create bounce buffers for content crypto and transport crypto.
- The was_async argument is dropped from netfs_read_subreq_terminated()
Instead we wake the read collection work item by either queuing it
or waking up the app thread.
- We don't need to use BH-excluding locks when communicating between
the issuing thread and the collection thread as neither of them now
run in BH context.
- Also included are a number of new tracepoints; a split of the
netfslib write collection code to put retrying into its own file
(it gets more complicated with content encryption).
- There are also some minor fixes AFS included, including fixing the
AFS directory format struct layout, reducing some directory
over-invalidation and making afs_mkdir() translate EEXIST to
ENOTEMPY (which is not available on all systems the servers
support).
- Finally, there's a patch to try and detect entry into the folio
unlock function with no folio_queue structs in the buffer (which
isn't allowed in the cases that can get there).
This is a debugging patch, but should be minimal overhead"
* tag 'vfs-6.14-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (31 commits)
netfs: Report on NULL folioq in netfs_writeback_unlock_folios()
afs: Add a tracepoint for afs_read_receive()
afs: Locally initialise the contents of a new symlink on creation
afs: Use the contained hashtable to search a directory
afs: Make afs_mkdir() locally initialise a new directory's content
netfs: Change the read result collector to only use one work item
afs: Make {Y,}FS.FetchData an asynchronous operation
afs: Fix cleanup of immediately failed async calls
afs: Eliminate afs_read
afs: Use netfslib for symlinks, allowing them to be cached
afs: Use netfslib for directories
afs: Make afs_init_request() get a key if not given a file
netfs: Add support for caching single monolithic objects such as AFS dirs
netfs: Add functions to build/clean a buffer in a folio_queue
afs: Add more tracepoints to do with tracking validity
cachefiles: Add auxiliary data trace
cachefiles: Add some subrequest tracepoints
netfs: Remove some extraneous directory invalidations
afs: Fix directory format encoding struct
afs: Fix EEXIST error returned from afs_rmdir() to be ENOTEMPTY
...
|
||
|
Linus Torvalds
|
fda5e3f284 |
Fix regression in GFP output in trace events
It was reported that the GFP flags in trace events went from human
readable to just their hex values:
gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP to gfp_flags=0x140cca
This was caused by a change that added the use of enums in calculating
the GFP flags. As defines get translated into their values in the
trace event format files, the user space tooling could easily convert
the GFP flags into their symbols via the __print_flags() helper macro.
The problem is that enums do not get converted, and the names of the
enums show up in the format files and user space tooling cannot translate
them.
Add TRACE_DEFINE_ENUM() around the enums used for GFP flags which is the
tracing infrastructure macro that informs the tracing subsystem what
the values for enums and it can then expose that to user space.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ4u7AxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgIkAP0VVW80Ck5K9hpDJ3SvSgaGDntSegY7
lI0ExVqGsJz8GQEAzkaRjgGXuXfzGzA9K7ZUe9X4R8W0Xkl9GisvqqEU1Ak=
=rzFM
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.13-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix regression in GFP output in trace events
It was reported that the GFP flags in trace events went from human
readable to just their hex values:
gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP to gfp_flags=0x140cca
This was caused by a change that added the use of enums in calculating
the GFP flags.
As defines get translated into their values in the trace event format
files, the user space tooling could easily convert the GFP flags into
their symbols via the __print_flags() helper macro.
The problem is that enums do not get converted, and the names of the
enums show up in the format files and user space tooling cannot
translate them.
Add TRACE_DEFINE_ENUM() around the enums used for GFP flags which is
the tracing infrastructure macro that informs the tracing subsystem
what the values for enums and it can then expose that to user space"
* tag 'trace-v6.13-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: gfp: Fix the GFP enum values shown for user space tracing tools
|
||
|
Steven Rostedt
|
60295b944f |
tracing: gfp: Fix the GFP enum values shown for user space tracing tools
Tracing tools like perf and trace-cmd read the /sys/kernel/tracing/events/*/*/format
files to know how to parse the data and also how to print it. For the
"print fmt" portion of that file, if anything uses an enum that is not
exported to the tracing system, user space will not be able to parse it.
The GFP flags use to be defines, and defines get translated in the print
fmt sections. But now they are converted to use enums, which is not.
The mm_page_alloc trace event format use to have:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (((struct page *)vmemmap_base) + (REC->pfn)) : ((void
*)0), REC->pfn != -1UL ? REC->pfn : 0, REC->order, REC->migratetype,
(REC->gfp_flags) ? __print_flags(REC->gfp_flags, "|", {( unsigned
long)(((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) |
(( gfp_t)0x40000u) | (( gfp_t)0x80000u) | (( gfp_t)0x2000u)) & ~((
gfp_t)(0x400u|0x800u))) | (( gfp_t)0x400u)), "GFP_TRANSHUGE"}, {( unsigned
long)((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) ...
Where the GFP values are shown and not their names. But after the GFP
flags were converted to use enums, it has:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (vmemmap + (REC->pfn)) : ((void *)0), REC->pfn != -1UL
? REC->pfn : 0, REC->order, REC->migratetype, (REC->gfp_flags) ?
__print_flags(REC->gfp_flags, "|", {( unsigned long)((((((((
gfp_t)(((((1UL))) << (___GFP_DIRECT_RECLAIM_BIT))|((((1UL))) <<
(___GFP_KSWAPD_RECLAIM_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_IO_BIT)))
| (( gfp_t)((((1UL))) << (___GFP_FS_BIT))) | (( gfp_t)((((1UL))) <<
(___GFP_HARDWALL_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_HIGHMEM_BIT))))
| (( gfp_t)((((1UL))) << (___GFP_MOVABLE_BIT))) | (( gfp_t)0)) | ((
gfp_t)((((1UL))) << (___GFP_COMP_BIT))) ...
Where the enums names like ___GFP_KSWAPD_RECLAIM_BIT are shown and not their
values. User space has no way to convert these names to their values and
the output will fail to parse. What is shown is now:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x1d1ac1 order=0 migratetype=1 gfp_flags=0x140cca
The TRACE_DEFINE_ENUM() macro was created to handle enums in the print fmt
files. This causes them to be replaced at boot up with the numbers, so
that user space tooling can parse it. By using this macro, the output is
back to the human readable:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x122233 order=0 migratetype=1 gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250116214438.749504792@goodmis.org
Reported-by: Michael Petlan <mpetlan@redhat.com>
Closes: https://lore.kernel.org/all/87be5f7c-1a0-dad-daa0-54e342efaea7@redhat.com/
Fixes:
|
||
|
Jakub Kicinski
|
2ee738e90e |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.13-rc8). Conflicts: drivers/net/ethernet/realtek/r8169_main.c |
||
|
Shakeel Butt
|
9023691d75 |
mm: mmap_lock: optimize mmap_lock tracepoints
We are starting to deploy mmap_lock tracepoint monitoring across our fleet and the early results showed that these tracepoints are consuming significant amount of CPUs in kernfs_path_from_node when enabled. It seems like the kernel is trying to resolve the cgroup path in the fast path of the locking code path when the tracepoints are enabled. In addition for some application their metrics are regressing when monitoring is enabled. The cgroup path resolution can be slow and should not be done in the fast path. Most userspace tools, like bpftrace, provides functionality to get the cgroup path from cgroup id, so let's just trace the cgroup id and the users can use better tools to get the path in the slow path. Link: https://lkml.kernel.org/r/20241125171617.113892-1-shakeel.butt@linux.dev Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Axel Rasmussen <axelrasmussen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Naohiro Aota
|
453a73c306 |
btrfs: zoned: reclaim unused zone by zone resetting
On the zoned mode, once used and freed region is still not reusable after the freeing. The underlying zone needs to be reset before reusing. Btrfs resets a zone when it removes a block group, and then new block group is allocated on the zones to reuse the zones. But, it is sometime too late to catch up with a write side. This commit introduces a new space-info reclaim method ZONE_RESET. That will pick a block group from the unused list and reset its zone to reuse the zone_unusable space. It is faster than removing the block group and re-creating a new block group on the same zones. For the first implementation, the ZONE_RESET is only applied to a block group whose region is fully zone_unusable. Reclaiming partial zone_unusable block group could be implemented later. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Muchun Song
|
9ab96b524d |
hugetlb: fix NULL pointer dereference in trace_hugetlbfs_alloc_inode
hugetlb_file_setup() will pass a NULL @dir to hugetlbfs_get_inode(), so we
will access a NULL pointer for @dir. Fix it and set __entry->dr to 0 if
@dir is NULL. Because ->i_ino cannot be 0 (see get_next_ino()), there is
no confusing if user sees a 0 inode number.
Link: https://lkml.kernel.org/r/20250106033118.4640-1-songmuchun@bytedance.com
Fixes:
|
||
|
David Howells
|
30bca65bbb
|
afs: Make /afs/@cell and /afs/.@cell symlinks
Make /afs/@cell a symlink in the /afs dynamic root to match what other AFS clients do rather than doing a substitution in the dentry name. This has the bonus of being tab-expandable also. Further, provide a /afs/.@cell symlink to point to the dotted cell share. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20250107183454.608451-4-dhowells@redhat.com cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Gabriele Monaco
|
bc3d482dcc |
rv: Simplify manual steps in monitor creation
While creating a new monitor in RV, besides generating code from dot2k, there are a few manual steps which can be tedious and error prone, like adding the tracepoints, makefile lines and kconfig. This patch restructures the existing monitors to keep some files in the monitor's folder itself, which can be automatically generated by future versions of dot2k. Monitors have now their own Kconfig and tracepoint snippets. For simplicity, the main tracepoint definition, is moved to the RV directory, it defines only the tracepoint classes and includes the monitor-specific tracepoints, which reside in the monitor directory. Tracepoints and Kconfig no longer need to be copied and adapted from existing ones but only need to be included in the main files. The Makefile remains untouched since there's little advantage in having a separated Makefile for each monitor with a single line and including it in the main RV Makefile. Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Kacur <jkacur@redhat.com> Link: https://lore.kernel.org/20241227144752.362911-6-gmonaco@redhat.com Signed-off-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Marco Elver
|
e3f6a42272 |
tracing: Remove pid in task_rename tracing output
Remove pid in task_rename tracepoint output, since that tracepoint only deals with the current task, and is printed by default. This also saves some space in the entry and avoids wasted padding. Link: https://lkml.kernel.org/r/20241105120247.596a0dc9@gandalf.local.home Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Marco Elver <elver@google.com> Link: https://lore.kernel.org/r/20241108113455.2924361-2-elver@google.com Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Marco Elver
|
c38904ebb7 |
tracing: Add task_prctl_unknown tracepoint
prctl() is a complex syscall which multiplexes its functionality based
on a large set of PR_* options. Currently we count 64 such options. The
return value of unknown options is -EINVAL, and doesn't distinguish from
known options that were passed invalid args that also return -EINVAL.
To understand if programs are attempting to use prctl() options not yet
available on the running kernel, provide the task_prctl_unknown
tracepoint.
Note, this tracepoint is in an unlikely cold path, and would therefore
be suitable for continuous monitoring (e.g. via perf_event_open).
While the above is likely the simplest usecase, additionally this
tracepoint can help unlock some testing scenarios (where probing
sys_enter or sys_exit causes undesirable performance overheads):
a. unprivileged triggering of a test module: test modules may register a
probe to be called back on task_prctl_unknown, and pick a very large
unknown prctl() option upon which they perform a test function for an
unprivileged user;
b. unprivileged triggering of an eBPF program function: similar
as idea (a).
Example trace_pipe output:
test-380 [001] ..... 78.142904: task_prctl_unknown: option=1234 arg2=101 arg3=102 arg4=103 arg5=104
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20241108113455.2924361-1-elver@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
||
|
David Howells
|
3c49e529e1
|
afs: Add a tracepoint for afs_read_receive()
Add a tracepoint for afs_read_receive() to allow potential missed wakeups to be debugged. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-32-dhowells@redhat.com cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
836bb70bde
|
afs: Make afs_mkdir() locally initialise a new directory's content
Initialise a new directory's content when it is created by mkdir locally rather than downloading the content from the server as we can predict what it's going to look like. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-29-dhowells@redhat.com cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
e2d46f2ec3
|
netfs: Change the read result collector to only use one work item
Change the way netfslib collects read results to do all the collection for
a particular read request using a single work item that walks along the
subrequest queue as subrequests make progress or complete, unlocking folios
progressively rather than doing the unlock in parallel as parallel requests
come in.
The code is remodelled to be more like the write-side code, though only
using a single stream. This makes it more directly comparable and thus
easier to duplicate fixes between the two sides.
This has a number of advantages:
(1) It's simpler. There doesn't need to be a complex donation mechanism
to handle mismatches between the size and alignment of subrequests and
folios. The collector unlocks folios as the subrequests covering each
complete.
(2) It should cause less scheduler overhead as there's a single work item
in play unlocking pages in parallel when a read gets split up into a
lot of subrequests instead of one per subrequest.
Whilst the parallellism is nice in theory, in practice, the vast
majority of loads are sequential reads of the whole file, so
committing a bunch of threads to unlocking folios out of order doesn't
help in those cases.
(3) It should make it easier to implement content decryption. A folio
cannot be decrypted until all the requests that contribute to it have
completed - and, again, most loads are sequential and so, most of the
time, we want to begin decryption sequentially (though it's great if
the decryption can happen in parallel).
There is a disadvantage in that we're losing the ability to decrypt and
unlock things on an as-things-arrive basis which may affect some
applications.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-28-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
David Howells
|
9750be93b2
|
afs: Fix cleanup of immediately failed async calls
If we manage to begin an async call, but fail to transmit any data on it
due to a signal, we then abort it which causes a race between the
notification of call completion from rxrpc and our attempt to cancel the
notification. The notification will be necessary, however, for async
FetchData to terminate the netfs subrequest.
However, since we get a notification from rxrpc upon completion of a call
(aborted or otherwise), we can just leave it to that.
This leads to calls not getting cleaned up, but appearing in
/proc/net/rxrpc/calls as being aborted with code 6.
Fix this by making the "error_do_abort:" case of afs_make_call() abort the
call and then abandon it to the notification handler.
Fixes:
|
||
|
David Howells
|
eae9e78951
|
afs: Use netfslib for symlinks, allowing them to be cached
Use netfslib to read symlinks, thereby allowing them to be cached by fscache and cachefiles. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-23-dhowells@redhat.com cc: Marc Dionne <marc.dionne@auristor.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
6dd8093661
|
afs: Use netfslib for directories
In the AFS ecosystem, directories are just a special type of file that is
downloaded and parsed locally. Download is done by the same mechanism as
ordinary files and the data can be cached. There is one important semantic
restriction on directories over files: the client must download the entire
directory in one go because, for example, the server could fabricate the
contents of the blob on the fly with each download and give a different
image each time.
So that we can cache the directory download, switch AFS directory support
over to using the netfslib single-object API, thereby allowing directory
content to be stored in the local cache.
To make this work, the following changes are made:
(1) A directory's contents are now stored in a folio_queue chain attached
to the afs_vnode (inode) struct rather than its associated pagecache,
though multipage folios are still used to hold the data. The folio
queue is discarded when the directory inode is evicted.
This also helps with the phasing out of ITER_XARRAY.
(2) Various directory operations are made to use and unuse the cache
cookie.
(3) The content checking, content dumping and content iteration are now
performed with a standard iov_iter iterator over the contents of the
folio queue.
(4) Iteration and modification must be done with the vnode's validate_lock
held. In conjunction with (1), this means that the iteration can be
done without the need to lock pages or take extra refs on them, unlike
when accessing ->i_pages.
(5) Convert to using netfs_read_single() to read data.
(6) Provide a ->writepages() to call netfs_writeback_single() to save the
data to the cache according to the VM's scheduling whilst holding the
validate_lock read-locked as (4).
(7) Change local directory image editing functions:
(a) Provide a function to get a specific block by number from the
folio_queue as we can no longer use the i_pages xarray to locate
folios by index. This uses a cursor to remember the current
position as we need to iterate through the directory contents.
The block is kmapped before being returned.
(b) Make the function in (a) extend the directory by an extra folio if
we run out of space.
(c) Raise the check of the block free space counter, for those blocks
that have one, higher in the function to eliminate a call to get a
block.
(d) Remove the page unlocking and putting done during the editing
loops. This is no longer necessary as the folio_queue holds the
references and the pages are no longer in the pagecache.
(e) Mark the inode dirty and pin the cache usage till writeback at the
end of a successful edit.
(8) Don't set the large_folios flag on the inode as we do the allocation
ourselves rather than the VM doing it automatically.
(9) Mark the inode as being a single object that isn't uploaded to the
server.
(10) Enable caching on directories.
(11) Only set the upload key for writeback for regular files.
Notes:
(*) We keep the ->release_folio(), ->invalidate_folio() and
->migrate_folio() ops as we set the mapping pointer on the folio.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-22-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
David Howells
|
49866ce7ea
|
netfs: Add support for caching single monolithic objects such as AFS dirs
Add support for caching the content of a file that contains a single monolithic object that must be read/written with a single I/O operation, such as an AFS directory. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-20-dhowells@redhat.com cc: Jeff Layton <jlayton@kernel.org> cc: Marc Dionne <marc.dionne@auristor.com> cc: netfs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
e61bfaad8f
|
netfs: Add functions to build/clean a buffer in a folio_queue
Add two netfslib functions to build up or clean up a buffer in a folio_queue. The first, netfs_alloc_folioq_buffer() will add folios to a buffer, extending up at least to the given size. If it can, it will add multipage folios. The folios are optionally have the mapping set and will have the index set according to the distance from the front of the folio queue. The second function will free up a folio queue and put any folios in the queue that have the first mark set. The netfs_folio tracepoint is also altered to cope with folios that have a NULL mapping, and the folios being added/put will have trace lines emitted and will be accounted in the stats. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-19-dhowells@redhat.com cc: Jeff Layton <jlayton@kernel.org> cc: Marc Dionne <marc.dionne@auristor.com> cc: netfs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
9e705016eb
|
afs: Add more tracepoints to do with tracking validity
Add wrappers to set and clear the callback promise and to mark a directory
as invalidated, and add tracepoints to track these events:
(1) afs_cb_promise: Log when a callback promise is set on a vnode.
(2) afs_vnode_invalid: Log when the server's callback promise for a vnode
is no longer valid and we need to refetch the vnode metadata.
(3) afs_dir_invalid: Log when the contents of a directory are marked
invalid and requiring refetching from the server and the cache
invalidating.
and two tracepoints to record data version number management:
(4) afs_set_dv: Log when the DV is recorded on a vnode.
(5) afs_dv_mismatch: Log when the DV recorded on a vnode plus the expected
delta for the operation does not match the DV we got back from the
server.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-18-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
David Howells
|
229105e5cf
|
cachefiles: Add auxiliary data trace
Add a display of the first 8 bytes of the downloaded auxiliary data and of the on-disk stored auxiliary data as these are used in coherency management. In the case of afs, this holds the data version number. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-17-dhowells@redhat.com cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
bcb33f79e1
|
cachefiles: Add some subrequest tracepoints
Add some tracepoints into the cachefiles write paths. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-16-dhowells@redhat.com cc: netfs@lists.linux.dev Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
06fa229ceb
|
netfs: Abstract out a rolling folio buffer implementation
A rolling buffer is a series of folios held in a list of folio_queues. New folios and folio_queue structs may be inserted at the head simultaneously with spent ones being removed from the tail without the need for locking. The rolling buffer includes an iov_iter and it has to be careful managing this as the list of folio_queues is extended such that an oops doesn't incurred because the iterator was pointing to the end of a folio_queue segment that got appended to and then removed. We need to use the mechanism twice, once for read and once for write, and, in future patches, we will use a second rolling buffer to handle bounce buffering for content encryption. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-6-dhowells@redhat.com cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
aabcabf274
|
netfs: Add a tracepoint to log the lifespan of folio_queue structs
Add a tracepoint to log the lifespan of folio_queue structs. For tracing illustrative purposes, folio_queues are tagged with the debug ID of whatever they're related to (typically a netfs_io_request) and a debug ID of their own. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-5-dhowells@redhat.com cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
2a8a384621
|
cachefiles: Clean up some whitespace in trace header
Clean up some whitespace in the cachefiles trace header. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-3-dhowells@redhat.com cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
d3d3ec8656
|
netfs: Clean up some whitespace in trace header
Clean up some whitespace in the netfs trace header. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-2-dhowells@redhat.com cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Ido Schimmel
|
002bf68a3b |
tracing: ipv6: Add flow label to fib6_table_lookup tracepoint
The different parameters affecting the IPv6 route lookup are printed to
the trace buffer by the fib6_table_lookup tracepoint. Add the IPv6 flow
label for better observability as it can affect the route lookup both in
terms of multipath hash calculation and policy based routing (FIB
rules). Example:
# echo 1 > /sys/kernel/tracing/events/fib6/fib6_table_lookup/enable
# ip -6 route get ::1 flowlabel 0x12345 ipproto udp sport 12345 dport 54321 &> /dev/null
# cat /sys/kernel/tracing/trace_pipe
ip-358 [010] ..... 44.897484: fib6_table_lookup: table 255 oif 0 iif 1 proto 17 ::/12345 -> ::1/54321 flowlabel 0x12345 tos 0 scope 0 flags 0 ==> dev lo gw :: err 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||
|
Matthew Wilcox (Oracle)
|
c910a64bc4 |
f2fs: Remove calls to folio_file_mapping()
All folios that f2fs sees belong to f2fs and not to the swapcache so it can dereference folio->mapping directly like all other filesystems do. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Matthew Wilcox (Oracle)
|
87e2a15bc0 |
f2fs: Convert submit tracepoints to take a folio
Remove accesses to page->index and page->mapping as well as unnecessary calls to page_file_mapping(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Dave Airlie
|
c7d6cb4c43 |
drm-misc-next for 6.14:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Remove driver date from drm_driver
Driver Changes:
- amdxdna: New driver!
- ivpu: Fix qemu crash when using passthrough
- nouveau: expose GSP-RM logging buffers via debugfs
- panfrost: Add MT8188 Mali-G57 MC3 support
- panthor: misc improvements,
- rockchip: Gamma LUT support
- tidss: Misc improvements
- virtio: convert to helpers, add prime support for scanout buffers
- v3d: Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
- vc4: Add support for BCM2712
- vkms: Improvements all across the board
- panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZ1G6igAKCRAnX84Zoj2+
dpx8AX4m4lM6bo7/I/SDqR6Dw6zDX2AgbupW9NzFoJmlC+X/XOLgKEoCwam+j+09
hZKYTwcBfRwVa1UDccjHNdWA0IUxUYFQUeiVk59xlBhZZs5vFKorX7r7eMQNl3S1
gcnSrwy6OQ==
=/dK/
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-12-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
[airlied: handle module ns conflict]
drm-misc-next for 6.14:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Remove driver date from drm_driver
Driver Changes:
- amdxdna: New driver!
- ivpu: Fix qemu crash when using passthrough
- nouveau: expose GSP-RM logging buffers via debugfs
- panfrost: Add MT8188 Mali-G57 MC3 support
- panthor: misc improvements,
- rockchip: Gamma LUT support
- tidss: Misc improvements
- virtio: convert to helpers, add prime support for scanout buffers
- v3d: Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
- vc4: Add support for BCM2712
- vkms: Improvements all across the board
- panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241205-agile-straight-pegasus-aca7f4@houat
|
||
|
Jakub Kicinski
|
5098462fba |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.13-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
7c48266593 |
rxrpc: Implement RACK/TLP to deal with transmission stalls [RFC8985]
When an rxrpc call is in its transmission phase and is sending a lot of packets, stalls occasionally occur that cause severe performance degradation (eg. increasing the transmission time for a 256MiB payload from 0.7s to 2.5s over a 10G link). rxrpc already implements TCP-style congestion control [RFC5681] and this helps mitigate the effects, but occasionally we're missing a time event that deals with a missing ACK, leading to a stall until the RTO expires. Fix this by implementing RACK/TLP in rxrpc. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
b40ef2b85a |
rxrpc: Manage RTT per-call rather than per-peer
Manage the determination of RTT on a per-call (ie. per-RPC op) basis rather than on a per-peer basis, averaging across all calls going to that peer. The problem is that the RTT measurements from the initial packets on a call may be off because the server may do some setting up (such as getting a lock on a file) before accepting the rest of the data in the RPC and, further, the RTT may be affected by server-side file operations, for instance if a large amount of data is being written or read. Note: When handling the FS.StoreData-type RPCs, for example, the server uses the userStatus field in the header of ACK packets as supplementary flow control to aid in managing this. AF_RXRPC does not yet support this, but it should be added. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
b509934094 |
rxrpc: Add a reason indicator to the tx_ack tracepoint
Record the reason for the transmission of an ACK in the rxrpc_tx_ack tracepoint, and not just in the rxrpc_propose_ack tracepoint. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
372d12d191 |
rxrpc: Add a reason indicator to the tx_data tracepoint
Add an indicator to the rxrpc_tx_data tracepoint to indicate what triggered the transmission of a particular packet. At this point, it's only normal transmission and retransmission, plus the tracepoint is also used to record loss injection, but in a future patch, TLP-induced (re-)transmission will also be a thing. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
08d55d7cf3 |
rxrpc: Don't allocate a txbuf for an ACK transmission
Don't allocate an rxrpc_txbuf struct for an ACK transmission. There's now no need as the memory to hold the ACK content is allocated with a page frag allocator. The allocation and freeing of a txbuf is just unnecessary overhead. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
a3d7f46d98 |
rxrpc: Display userStatus in rxrpc_rx_ack trace
Display the userStatus field from the Rx packet header in the rxrpc_rx_ack trace line. This is used for flow control purposes by FS.StoreData-type kafs RPC calls. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
93dfca65a1 |
rxrpc: Adjust the rxrpc_rtt_rx tracepoint
Adjust the rxrpc_rtt_rx tracepoint in the following ways:
(1) Display the collected RTT sample in the rxrpc_rtt_rx trace.
(2) Move the division of srtt by 8 to the TP_printk() rather doing it
before invoking the trace point.
(3) Display the min_rtt value.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
David Howells
|
dcdff0d8e3 |
rxrpc: Store the DATA serial in the txqueue and use this in RTT calc
Store the serial number set on a DATA packet at the point of transmission in the rxrpc_txqueue struct and when an ACK is received, match the reference number in the ACK by trawling the txqueue rather than sharing an RTT table with ACK RTT. This can be done as part of Tx queue rotation. This means we have a lot more RTT samples available and is faster to search with all the serial numbers packed together into a few cachelines rather than being hung off different txbufs. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20241204074710.990092-25-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
9b052c6b92 |
rxrpc: Use the new rxrpc_tx_queue struct to more efficiently process ACKs
With the change in the structure of the transmission buffer to store buffers in bunches of 32 or 64 (BITS_PER_LONG) we can place sets of per-buffer flags into the rxrpc_tx_queue struct rather than storing them in rxrpc_tx_buf, thereby vastly increasing efficiency when assessing the SACK table in an ACK packet. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20241204074710.990092-24-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
f7dd0dc965 |
rxrpc: Adjust names and types of congestion-related fields
Adjust some of the names of fields and constants to make them look a bit more like the TCP congestion symbol names, such as flight_size -> in_flight and congest_mode to ca_state. Move the persistent congestion-related fields from the rxrpc_ack_summary struct into the rxrpc_call struct rather than copying them out and back in again. The rxrpc_congest tracepoint can fetch them from the call struct. Rename the counters for soft acks and nacks to have an 's' on the front to reflect the softness, e.g. nr_acks -> nr_sacks. Make fields counting numbers of packets or numbers of acks u16 rather than u8 to allow for windows of up to 8192 DATA packets in flight in future. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20241204074710.990092-23-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
203457e11b |
rxrpc: Replace call->acks_first_seq with tracking of the hard ACK point
Replace the call->acks_first_seq variable (which holds ack.firstPacket from the latest ACK packet and indicates the sequence number of the first ack slot in the SACK table) with call->acks_hard_ack which will hold the highest sequence hard ACK'd. This is 1 less than call->acks_first_seq, but it fits in the same schema as the other tracking variables which hold the sequence of a packet, not one past it. This will fix the rxrpc_congest tracepoint's calculation of SACK window size which shows one fewer than it should - and will occasionally go to -1. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20241204074710.990092-21-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
692c4caa07 |
rxrpc: call->acks_hard_ack is now the same call->tx_bottom, so remove it
Now that packets are removed from the Tx queue in the rotation function rather than being cleaned up later, call->acks_hard_ack now advances in step with call->tx_bottom, so remove it. Some of the places call->acks_hard_ack is used in the rxrpc tracepoints are replaced by call->acks_first_seq instead as that's the peer's reported idea of the hard-ACK point. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20241204074710.990092-20-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
b341a0263b |
rxrpc: Implement progressive transmission queue struct
We need to scan the buffers in the transmission queue occasionally when processing ACKs, but the transmission queue is currently a linked list of transmission buffers which, when we eventually expand the Tx window to 8192 packets will be very slow to walk. Instead, pull the fields we need to examine a lot (last sent time, retransmitted flag) into a new struct rxrpc_txqueue and make each one hold an array of 32 or 64 packets. The transmission queue is then a list of these structs, each pointing to a contiguous set of packets. Scanning is then a lot faster as the flags and timestamps are concentrated in the CPU dcache. The transmission timestamps are stored as a number of microseconds from a base ktime to reduce memory requirements. This should be fine provided we manage to transmit an entire buffer within an hour. This will make implementing RACK-TLP [RFC8985] easier as it will be less costly to scan the transmission buffers. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20241204074710.990092-19-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
9e3cccd176 |
rxrpc: Fix CPU time starvation in I/O thread
Starvation can happen in the rxrpc I/O thread because it goes back to the
top of the I/O loop after it does any one thing without trying to give any
other connection or call CPU time. Also, because it processes one call
packet at a time, it tries to do the retransmission loop after each ACK
without checking to see if there are other ACKs already in the queue that
can update the SACK state.
Fix this by:
(1) Add a received-packet queue on each call.
(2) Distribute packets from the master Rx queue to the individual call,
conn and error queues and 'poking' calls to add them to the attend
queue first thing in the I/O thread.
(3) Go through all the attention-seeking connections and calls before
going back to the top of the I/O thread. Each queue is extracted as a
whole and then gone through so that new additions to insert themselves
into the queue.
(4) Make the call event handler go through all the packets currently on
the call's rx_queue before transmitting and retransmitting DATA
packets.
(5) Drop the skb argument from the call event handler as this is now
replaced with the rx_queue. Instead, keep track of whether we
received a packet or an ACK for the tests that used to rely on that.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-14-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
David Howells
|
149d002bee |
rxrpc: Add a tracepoint to show variables pertinent to jumbo packet size
Add a tracepoint to be called right before packets are transmitted for the first time that shows variable values that are pertinent to how many subpackets will be added to a jumbo DATA packet. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20241204074710.990092-13-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
eeaedc5449 |
rxrpc: Implement path-MTU probing using padded PING ACKs (RFC8899)
Implement path-MTU probing (along the lines of RFC8899) by padding some of the PING ACKs we send. PING ACKs get their own individual responses quite apart from the acking of data (though, as ACKs, they fulfil that role also). The probing concentrates on packet sizes that correspond how many subpackets can be stuffed inside a jumbo packet as jumbo DATA packets are just aggregations of individual DATA packets and can be split easily for retransmission purposes. If we want to perform probing, we advertise this by setting the maximum number of jumbo subpackets to 0 in the ack trailer when we send an ACK and see if the peer is also advertising the service. This is interpreted by non-supporting Rx stacks as an indication that jumbo packets aren't supported. The MTU sizes advertised in the ACK trailer AF_RXRPC transmits are pegged at a maximum of 1444 unless pmtud is supported by both sides. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20241204074710.990092-10-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
8b5823ea43 |
rxrpc: Request an ACK on impending Tx stall
Set the REQUEST-ACK flag on the DATA packet we're about to send if we're about to stall transmission because the app layer isn't keeping up supplying us with data to transmit. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20241204074710.990092-8-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
efa95c3235 |
rxrpc: Clean up Tx header flags generation handling
Clean up the generation of the header flags when building packet headers
for transmission:
(1) Assemble the flags in a local variable rather than in the txb->flags.
(2) Do the flags masking and JUMBO-PACKET setting in one bit of code for
both the main header and the jumbo headers.
(3) Generate the REQUEST-ACK flag afresh each time. There's a possibility
we might want to do jumbo retransmission packets in future.
(4) Pass the local flags variable to the rxrpc_tx_data tracepoint rather
than the combination of the txb flags and the wire header flags (the
latter belong only to the first subpacket).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
David Howells
|
0e56ebde24 |
rxrpc: Fix handling of received connection abort
Fix the handling of a connection abort that we've received. Though the
abort is at the connection level, it needs propagating to the calls on that
connection. Whilst the propagation bit is performed, the calls aren't then
woken up to go and process their termination, and as no further input is
forthcoming, they just hang.
Also add some tracing for the logging of connection aborts.
Fixes:
|
||
|
Akinobu Mita
|
6535b8669c |
mm/damon: fix order of arguments in damos_before_apply tracepoint
Since the order of the scheme_idx and target_idx arguments in TP_ARGS is
reversed, they are stored in the trace record in reverse.
Link: https://lkml.kernel.org/r/20241115182023.43118-1-sj@kernel.org
Link: https://patch.msgid.link/20241112154828.40307-1-akinobu.mita@gmail.com
Fixes:
|
||
|
Jordan Rome
|
d48da4d5ed
|
security: add trace event for cap_capable
In cases where we want a stable way to observe/trace cap_capable (e.g. protection from inlining and API updates) add a tracepoint that passes: - The credentials used - The user namespace of the resource being accessed - The user namespace in which the credential provides the capability to access the targeted resource - The capability to check for - The return value of the check Signed-off-by: Jordan Rome <linux@jordanrome.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Link: https://lore.kernel.org/r/20241204155911.1817092-1-linux@jordanrome.com Signed-off-by: Serge Hallyn <sergeh@kernel.org> |
||
|
Maxime Ripard
|
3aba2eba84
|
Merge drm/drm-next into drm-misc-next
Kickstart 6.14 cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Linus Torvalds
|
baf67f6aa9 |
NFS client updates for Linux 6.13
Highlights include:
Bugfixes:
- NFSv4.0: Fix a use-after-free problem in open()
- nfs/localio: fix for a memory corruption in nfs_local_read_done
- Revert "nfs: don't reuse partially completed requests in nfs_lock_and_join_requests"
- nfsv4: ignore SB_RDONLY when mounting nfs
- sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reseting the transport
- SUNRPC: timeout and cancel TLS handshake with -ETIMEDOUT
- sunrpc: fix one UAF issue caused by sunrpc kernel tcp socket
- pNFS/blocklayout: Fix device registration issues
- SUNRPC: Fix a hang in TLS sock_close if sk_write_pending
Features and cleanups:
- localio cleanups from Mike Snitzer
- Clean up refcounting on the nfs version modules
- __counted_by() annotations
- nfs: make processes that are waiting for an I/O lock killable
-----BEGIN PGP SIGNATURE-----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=Ih5w
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- nfs/localio: fix for a memory corruption in nfs_local_read_done
- Revert "nfs: don't reuse partially completed requests in
nfs_lock_and_join_requests"
- nfsv4:
- ignore SB_RDONLY when mounting nfs
- Fix a use-after-free problem in open()
- sunrpc:
- clear XPRT_SOCK_UPD_TIMEOUT when reseting the transport
- timeout and cancel TLS handshake with -ETIMEDOUT
- fix one UAF issue caused by sunrpc kernel tcp socket
- Fix a hang in TLS sock_close if sk_write_pending
- pNFS/blocklayout: Fix device registration issues
Features and cleanups:
- localio cleanups from Mike Snitzer
- Clean up refcounting on the nfs version modules
- __counted_by() annotations
- nfs: make processes that are waiting for an I/O lock killable"
* tag 'nfs-for-6.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
fs/nfs/io: make nfs_start_io_*() killable
nfs/blocklayout: Limit repeat device registration on failure
nfs/blocklayout: Don't attempt unregister for invalid block device
sunrpc: fix one UAF issue caused by sunrpc kernel tcp socket
SUNRPC: timeout and cancel TLS handshake with -ETIMEDOUT
sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport
nfs: ignore SB_RDONLY when mounting nfs
Revert "nfs: don't reuse partially completed requests in nfs_lock_and_join_requests"
Revert "fs: nfs: fix missing refcnt by replacing folio_set_private by folio_attach_private"
nfs/localio: must clear res.replen in nfs_local_read_done
NFSv4.0: Fix a use-after-free problem in the asynchronous open()
NFSv4.0: Fix the wake up of the next waiter in nfs_release_seqid()
SUNRPC: Fix a hang in TLS sock_close if sk_write_pending
sunrpc: remove newlines from tracepoints
nfs: Annotate struct pnfs_commit_array with __counted_by()
nfs/localio: eliminate need for nfs_local_fsync_work forward declaration
nfs/localio: remove extra indirect nfs_to call to check {read,write}_iter
nfs/localio: eliminate unnecessary kref in nfs_local_fsync_ctx
nfs/localio: remove redundant suid/sgid handling
NFS: Implement get_nfs_version()
...
|
||
|
Linus Torvalds
|
7f4f3b14e8 |
Add Rust support for trace events:
- Allow Rust code to have trace events Trace events is a popular way to debug what is happening inside the kernel or just to find out what is happening. Rust code is being added to the Linux kernel but it currently does not support the tracing infrastructure. Add support of trace events inside Rust code. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ0DjqhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qrLlAPsF6t/c1nHSGTKDv9FJDJe4JHdP7e+U 7X0S8BmSTKFNAQD+K2TEd0bjVP7ug8dQZBT+fveiFr+ARYxAwJ3JnEFjUwg= =Ab+T -----END PGP SIGNATURE----- Merge tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull rust trace event support from Steven Rostedt: "Allow Rust code to have trace events Trace events is a popular way to debug what is happening inside the kernel or just to find out what is happening. Rust code is being added to the Linux kernel but it currently does not support the tracing infrastructure. Add support of trace events inside Rust code" * tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rust: jump_label: skip formatting generated file jump_label: rust: pass a mut ptr to `static_key_count` samples: rust: fix `rust_print` build making it a combined module rust: add arch_static_branch jump_label: adjust inline asm to be consistent rust: samples: add tracepoint to Rust sample rust: add tracepoint support rust: add static_branch_unlikely for static_key_false |
||
|
Linus Torvalds
|
9f16d5e6f2 |
The biggest change here is eliminating the awful idea that KVM had, of
essentially guessing which pfns are refcounted pages. The reason to
do so was that KVM needs to map both non-refcounted pages (for example
BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP VMAs that contain
refcounted pages. However, the result was security issues in the past,
and more recently the inability to map VM_IO and VM_PFNMAP memory
that _is_ backed by struct page but is not refcounted. In particular
this broke virtio-gpu blob resources (which directly map host graphics
buffers into the guest as "vram" for the virtio-gpu device) with the
amdgpu driver, because amdgpu allocates non-compound higher order pages
and the tail pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the per-architecture
code, to always work on the pfn whenever possible. The large series that
did this, from David Stevens and Sean Christopherson, also cleaned up
substantially the set of functions that provided arch code with the
pfn for a host virtual addresses. The previous maze of twisty little
passages, all different, is replaced by five functions (__gfn_to_page,
__kvm_faultin_pfn, the non-__ versions of these two, and kvm_prefetch_pages)
saving almost 200 lines of code.
ARM:
* Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
* Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call
was introduced in PSCIv1.3 as a mechanism to request hibernation,
similar to the S4 state in ACPI
* Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
* PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
* Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
* Avoid emulated MMIO completion if userspace has requested synchronous
external abort injection
* Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
* Add iocsr and mmio bus simulation in kernel.
* Add in-kernel interrupt controller emulation.
* Add support for virtualization extensions to the eiointc irqchip.
PPC:
* Drop lingering and utterly obsolete references to PPC970 KVM, which was
removed 10 years ago.
* Fix incorrect documentation references to non-existing ioctls
RISC-V:
* Accelerate KVM RISC-V when running as a guest
* Perf support to collect KVM guest statistics from host side
s390:
* New selftests: more ucontrol selftests and CPU model sanity checks
* Support for the gen17 CPU model
* List registers supported by KVM_GET/SET_ONE_REG in the documentation
x86:
* Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve
documentation, harden against unexpected changes. Even if the hardware
A/D tracking is disabled, it is possible to use the hardware-defined A/D
bits to track if a PFN is Accessed and/or Dirty, and that removes a lot
of special cases.
* Elide TLB flushes when aging secondary PTEs, as has been done in x86's
primary MMU for over 10 years.
* Recover huge pages in-place in the TDP MMU when dirty page logging is
toggled off, instead of zapping them and waiting until the page is
re-accessed to create a huge mapping. This reduces vCPU jitter.
* Batch TLB flushes when dirty page logging is toggled off. This reduces
the time it takes to disable dirty logging by ~3x.
* Remove the shrinker that was (poorly) attempting to reclaim shadow page
tables in low-memory situations.
* Clean up and optimize KVM's handling of writes to MSR_IA32_APICBASE.
* Advertise CPUIDs for new instructions in Clearwater Forest
* Quirk KVM's misguided behavior of initialized certain feature MSRs to
their maximum supported feature set, which can result in KVM creating
invalid vCPU state. E.g. initializing PERF_CAPABILITIES to a non-zero
value results in the vCPU having invalid state if userspace hides PDCM
from the guest, which in turn can lead to save/restore failures.
* Fix KVM's handling of non-canonical checks for vCPUs that support LA57
to better follow the "architecture", in quotes because the actual
behavior is poorly documented. E.g. most MSR writes and descriptor
table loads ignore CR4.LA57 and operate purely on whether the CPU
supports LA57.
* Bypass the register cache when querying CPL from kvm_sched_out(), as
filling the cache from IRQ context is generally unsafe; harden the
cache accessors to try to prevent similar issues from occuring in the
future. The issue that triggered this change was already fixed in 6.12,
but was still kinda latent.
* Advertise AMD_IBPB_RET to userspace, and fix a related bug where KVM
over-advertises SPEC_CTRL when trying to support cross-vendor VMs.
* Minor cleanups
* Switch hugepage recovery thread to use vhost_task. These kthreads can
consume significant amounts of CPU time on behalf of a VM or in response
to how the VM behaves (for example how it accesses its memory); therefore
KVM tried to place the thread in the VM's cgroups and charge the CPU
time consumed by that work to the VM's container. However the kthreads
did not process SIGSTOP/SIGCONT, and therefore cgroups which had KVM
instances inside could not complete freezing. Fix this by replacing the
kthread with a PF_USER_WORKER thread, via the vhost_task abstraction.
Another 100+ lines removed, with generally better behavior too like
having these threads properly parented in the process tree.
* Revert a workaround for an old CPU erratum (Nehalem/Westmere) that didn't
really work; there was really nothing to work around anyway: the broken
patch was meant to fix nested virtualization, but the PERF_GLOBAL_CTRL
MSR is virtualized and therefore unaffected by the erratum.
* Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is 'y'.
x86 selftests:
* x86 selftests can now use AVX.
Documentation:
* Use rST internal links
* Reorganize the introduction to the API document
Generic:
* Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead
of RCU, so that running a vCPU on a different task doesn't encounter long
due to having to wait for all CPUs become quiescent. In general both reads
and writes are rare, but userspace that supports confidential computing is
introducing the use of "helper" vCPUs that may jump from one host processor
to another. Those will be very happy to trigger a synchronize_rcu(), and
the effect on performance is quite the disaster.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmc9MRYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP00QgArxqxBIGLCW5t7bw7vtNq63QYRyh4
dTiDguLiYQJ+AXmnRu11R6aPC7HgMAvlFCCmH+GEce4WEgt26hxCmncJr/aJOSwS
letCS7TrME16PeZvh25A1nhPBUw6mTF1qqzgcdHMrqXG8LuHoGcKYGSRVbkf3kfI
1ZoMq1r8ChXbVVmCx9DQ3gw1TVr5Dpjs2voLh8rDSE9Xpw0tVVabHu3/NhQEz/F+
t8/nRaqH777icCHIf9PCk5HnarHxLAOvhM2M0Yj09PuBcE5fFQxpxltw/qiKQqqW
ep4oquojGl87kZnhlDaac2UNtK90Ws+WxxvCwUmbvGN0ZJVaQwf4FvTwig==
=lWpE
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
||
|
Linus Torvalds
|
5c00ff742b |
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection algorithm.
This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of shadow
entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in the
hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page into
small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio size
rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt
removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations" from
Mike Rapoport teaches x86 to use large pages for read-only-execute
module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests
over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a single
VMA, rather than requiring that multiple VMAs be created for this.
Improved efficiencies for userspace memory allocators are expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP from
the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep is
enabled.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzwFqgAKCRDdBJ7gKXxA
jkeuAQCkl+BmeYHE6uG0hi3pRxkupseR6DEOAYIiTv0/l8/GggD/Z3jmEeqnZaNq
xyyenpibWgUoShU2wZ/Ha8FE5WDINwg=
=JfWR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
||
|
Linus Torvalds
|
06afb0f361 |
tracing updates for v6.13:
- Addition of faultable tracepoints
There's a tracepoint attached to both a system call entry and exit. This
location is known to allow page faults. The tracepoints are called under
an rcu_read_lock() which does not allow faults that can sleep. This limits
the ability of tracepoint handlers to page fault in user space system call
parameters. Now these tracepoints have been made "faultable", allowing the
callbacks to fault in user space parameters and record them.
Note, only the infrastructure has been implemented. The consumers (perf,
ftrace, BPF) now need to have their code modified to allow faults.
- Fix up of BPF code for the tracepoint faultable logic
- Update tracepoints to use the new static branch API
- Remove trace_*_rcuidle() variants and the SRCU protection they used
- Remove unused TRACE_EVENT_FL_FILTERED logic
- Replace strncpy() with strscpy() and memcpy()
- Use replace per_cpu_ptr(smp_processor_id()) with this_cpu_ptr()
- Fix perf events to not duplicate samples when tracing is enabled
- Replace atomic64_add_return(1, counter) with atomic64_inc_return(counter)
- Make stack trace buffer 4K instead of PAGE_SIZE
- Remove TRACE_FLAG_IRQS_NOSUPPORT flag as it was never used
- Get the true return address for function tracer when function graph tracer
is also running.
When function_graph trace is running along with function tracer,
the parent function of the function tracer sometimes is
"return_to_handler", which is the function graph trampoline to record
the exit of the function. Use existing logic that calls into the
fgraph infrastructure to find the real return address.
- Remove (un)regfunc pointers out of tracepoint structure
- Added last minute bug fix for setting pending modules in stack function
filter.
echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
Would cause a kernel NULL dereference.
- Minor clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZz6dehQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlQsAP9aB0XGUV3UykvjZuKK84VDZ26a2hZH
X2JDYsNA4luuPAEAz/BG2rnslfMZ04WTMAl8h1eh10lxcuHG0wQMHVBXIwI=
=lzb5
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Addition of faultable tracepoints
There's a tracepoint attached to both a system call entry and exit.
This location is known to allow page faults. The tracepoints are
called under an rcu_read_lock() which does not allow faults that can
sleep. This limits the ability of tracepoint handlers to page fault
in user space system call parameters. Now these tracepoints have been
made "faultable", allowing the callbacks to fault in user space
parameters and record them.
Note, only the infrastructure has been implemented. The consumers
(perf, ftrace, BPF) now need to have their code modified to allow
faults.
- Fix up of BPF code for the tracepoint faultable logic
- Update tracepoints to use the new static branch API
- Remove trace_*_rcuidle() variants and the SRCU protection they used
- Remove unused TRACE_EVENT_FL_FILTERED logic
- Replace strncpy() with strscpy() and memcpy()
- Use replace per_cpu_ptr(smp_processor_id()) with this_cpu_ptr()
- Fix perf events to not duplicate samples when tracing is enabled
- Replace atomic64_add_return(1, counter) with
atomic64_inc_return(counter)
- Make stack trace buffer 4K instead of PAGE_SIZE
- Remove TRACE_FLAG_IRQS_NOSUPPORT flag as it was never used
- Get the true return address for function tracer when function graph
tracer is also running.
When function_graph trace is running along with function tracer, the
parent function of the function tracer sometimes is
"return_to_handler", which is the function graph trampoline to record
the exit of the function. Use existing logic that calls into the
fgraph infrastructure to find the real return address.
- Remove (un)regfunc pointers out of tracepoint structure
- Added last minute bug fix for setting pending modules in stack
function filter.
echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
Would cause a kernel NULL dereference.
- Minor clean ups
* tag 'trace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits)
ftrace: Fix regression with module command in stack_trace_filter
tracing: Fix function name for trampoline
ftrace: Get the true parent ip for function tracer
tracing: Remove redundant check on field->field in histograms
bpf: ensure RCU Tasks Trace GP for sleepable raw tracepoint BPF links
bpf: decouple BPF link/attach hook and BPF program sleepable semantics
bpf: put bpf_link's program when link is safe to be deallocated
tracing: Replace strncpy() with strscpy() when copying comm
tracing: Add might_fault() check in __DECLARE_TRACE_SYSCALL
tracing: Fix syscall tracepoint use-after-free
tracing: Introduce tracepoint_is_faultable()
tracing: Introduce tracepoint extended structure
tracing: Remove TRACE_FLAG_IRQS_NOSUPPORT
tracing: Replace multiple deprecated strncpy with memcpy
tracing: Make percpu stack trace buffer invariant to PAGE_SIZE
tracing: Use atomic64_inc_return() in trace_clock_counter()
trace/trace_event_perf: remove duplicate samples on the first tracepoint event
tracing/bpf: Add might_fault check to syscall probes
tracing/perf: Add might_fault check to syscall probes
tracing/ftrace: Add might_fault check to syscall probes
...
|
||
|
Lizhi Hou
|
aac243092b |
accel/amdxdna: Add command execution
Add interfaces for user application to submit command and wait for its completion. Co-developed-by: Min Ma <min.ma@amd.com> Signed-off-by: Min Ma <min.ma@amd.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-8-lizhi.hou@amd.com |
||
|
Lizhi Hou
|
b87f920b93 |
accel/amdxdna: Support hardware mailbox
The hardware mailboxes are used by the driver to submit requests to firmware and receive the completion notices from hardware. Initially, a management mailbox channel is up and running. The driver may request firmware to create/destroy more channels dynamically through management channel. Add driver internal mailbox interfaces. - create/destroy a mailbox channel instance - send a message to the firmware through a specific channel - wait for a notification from the specific channel Co-developed-by: George Yang <George.Yang@amd.com> Signed-off-by: George Yang <George.Yang@amd.com> Co-developed-by: Min Ma <min.ma@amd.com> Signed-off-by: Min Ma <min.ma@amd.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-4-lizhi.hou@amd.com |
||
|
Linus Torvalds
|
51ae62a12c |
dma-mapping updates for Linux 6.13
- improve the DMA API tracing code (Sean Anderson) - misc cleanups (Christoph Hellwig, Sui Jingfeng) - fix pointer abuse when finding the shared DMA pool (Geert Uytterhoeven) - fix a deadlock in dma-debug (Levi Yun) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmc8xN8LHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYNwEBAAtd0zTiNuEUklY6YtZ7l/Zaudibmq1klHLGAQZEa9 J4P2zzJ6xTkUblq/aVmFUQmf+vuuszjHIrrXnL3tAulSQKxS5Zj3Cci4cW4IAfBn GXB3OTR2lgXSk+8sulgiwc1AA8xgIFJJgZDTni1WdiW9LwLvUyYI1XNVAwCYOM2J HS2QxIySm3eg23F5bRz+Xl3LQlWYlHkMHryqKloHWIqchmVpYlYbj7uBMjAH4FKz l3zhd9pZSp9w5NNCp2Y/d81XdOUSjcYSR1gUotLzmW0Sj3YjnKXKdjjlPrj3zimb 9EhgdalnpVrJ4Nr7MmpSUEbTVs+hBjXDoxTnnBRlKEl5aIKqceCrSBvoP70ygbkf KRqNS4ZxKe59cfnWAZQVcg8g01TetCoJR6QyGaoTE9Lz+9cPl2xAwyFmcYN2w/Cp qs0ZEFiNpqLAN5zwR/Pakz5YgIA/3N5MW0d9X9yEH9l4+HUMxWIF/qvThBSsGswT EmVUQqPpEzGJrcNYgC1UsEBltGmle02BwcoFEdMr7bzldW7yIpoDEOkKkBM3JFF9 vgkpAkZGA5j4VMSkSwOrhi1rI0XAoImtJeM0wqhLtpXgQDjrMd3DaW6by6uUeH5x DcXf6qVOAsB04je9JkHh9I4BXVrWC01MSgFdjfQRl9gktn7970YFswG4ksYAwxU6 xHQ= =ivZc -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.13-2024-11-19' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve the DMA API tracing code (Sean Anderson) - misc cleanups (Christoph Hellwig, Sui Jingfeng) - fix pointer abuse when finding the shared DMA pool (Geert Uytterhoeven) - fix a deadlock in dma-debug (Levi Yun) * tag 'dma-mapping-6.13-2024-11-19' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: save base/size instead of pointer to shared DMA pool dma-mapping: fix swapped dir/flags arguments to trace_dma_alloc_sgt_err dma-mapping: drop unneeded includes from dma-mapping.h dma-mapping: trace more error paths dma-mapping: use trace_dma_alloc for dma_alloc* instead of using trace_dma_map dma-mapping: trace dma_alloc/free direction dma-mapping: use macros to define events in a class dma-mapping: remove an outdated comment from dma-map-ops.h dma-debug: remove DMA_API_DEBUG_SG dma-debug: store a phys_addr_t in struct dma_debug_entry dma-debug: fix a possible deadlock on radix_lock |
||
|
Linus Torvalds
|
fcc79e1714 |
Networking changes for 6.13.
The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core
----
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read
access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code
--------------------------------------------
- Add small file operations for debugfs, to reduce the struct ops size.
- Refactoring and optimization for the implementation of page_frag API,
This is a preparatory work to consolidate the page_frag
implementation.
Netfilter
---------
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users
the option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent
CI improvements.
BPF
---
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols
---------
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after close,
the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per device
neigh lists.
Driver API
----------
- Introduce a unified interface to configure transmission H/W shaping,
and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling
-----------------
- forwarding: introduce deferred commands, to simplify
the cleanup phase
Drivers
-------
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- adds support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Adds representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- adds support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implements page pool support
- macsec:
- inherit lower device's features and TSO limits when offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- Add the dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- adds clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GzPr
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
|
||
|
Linus Torvalds
|
7d75606665 |
pwm: Changes for v6.13-rc1
This pull request prominently contains a new abstraction for PWM waveforms that is more expressive that the legacy one. Compared to the old abstraction it contains a duty_offset member instead of polarity. This new abstraction is already used in an ADC driver merged into the iio tree. So I expect you will get a part of this tree also via the iio pull request for 6.13-rc1 (tag pwm/duty_offset-for-6.13-rc1). Otherwise it's the usual collection of fixes, cleanups and dt doc updates. This time around thanks go to Andy Shevchenko, Clark Wang, Conor Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang, Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code contributions, testing and review. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmc7DoAACgkQj4D7WH0S /k5tEgf/QJY8mAPPZR45dDo+GdUnZAaV85sseOezeApjB6kMYXKsKWoDC0uQ9m40 t7zkR8rXCk84rYSg4fGpcWL12v03n8cXmABkJUsqkUkLCcU/pifKzxanC25IWMH1 DGCW8tev4/NSe2ud9kLmFR/p85aioIW47Az3QH096Wv+Y5ij3v5e8PHBIaSiWHlb gfQI1XWerHSbAZexF132zGZOD/TBWb6djAQKACh5KWBPWB54zK3n3ngxoOCSMKSh Li8nfVyy32mPurLfTqaTaAHg7uGrcCGOVhqnXSQiuUayMlV/T7FX/uwfF/X/YKFm iqIPoYeUhLHmHJkHLACtPzUajkTJbg== =3d9l -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm updates from Uwe Kleine-König: "This contains a new abstraction for PWM waveforms that is more expressive that the legacy one. Compared to the old abstraction it contains a duty_offset member instead of polarity. This new abstraction is already used in an ADC driver merged into the iio tree. The new API requires changes to the lowlevel drivers. For now there are two drivers that are converted to the new API (axi-pwmgen and stm32). Converted drivers continue to work with the old API. Drivers not yet converted only work with the older API. Otherwise it's the usual collection of fixes, cleanups and dt doc updates. This time around thanks go to Andy Shevchenko, Clark Wang, Conor Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang, Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code contributions, testing and review" * tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: pwm: Assume a disabled PWM to emit a constant inactive output pwm: core: export pwm_get_state_hw() pwm: core: use device_match_name() instead of strcmp(dev_name(... dt-bindings: pwm: adi,axi-pwmgen: Increase #pwm-cells to 3 pwm: imx27: Use clk_bulk_*() API to simplify clock handling pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle pwm: axi-pwmgen: Enable FORCE_ALIGN by default pwm: axi-pwmgen: Rename 0x10 register dt-bindings: pwm: amlogic: Document C3 PWM pwm: axi-pwmgen: Create a dedicated function for getting driver data from a chip pwm: atmel-tcb: Use min() macro pwm: stm32: Fix error checking for a regmap_read() call pwm: Add kernel doc for members added to pwm_ops recently pwm: Reorder symbols in core.c pwm: stm32: Implementation of the waveform callbacks pwm: axi-pwmgen: Implementation of the waveform callbacks pwm: Add tracing for waveform callbacks pwm: Provide new consumer API functions for waveforms pwm: New abstraction for PWM waveforms pwm: Add more locking |
||
|
Linus Torvalds
|
c1f2ffe207 |
- Log and handle twp new AMD-specific MCA registers: SYND1 and SYND2 and
report the Field Replaceable Unit text info reported through them
- Add support for handling variable-sized SMCA BERT records
- Add the capability for reporting vendor-specific RAS error info without
adding vendor-specific fields to struct mce
- Cleanups
-----BEGIN PGP SIGNATURE-----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=djpG
-----END PGP SIGNATURE-----
Merge tag 'ras_core_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Log and handle twp new AMD-specific MCA registers: SYND1 and SYND2
and report the Field Replaceable Unit text info reported through them
- Add support for handling variable-sized SMCA BERT records
- Add the capability for reporting vendor-specific RAS error info
without adding vendor-specific fields to struct mce
- Cleanups
* tag 'ras_core_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/mce_amd: Add support for FRU text in MCA
x86/mce/apei: Handle variable SMCA BERT record size
x86/MCE/AMD: Add support for new MCA_SYND{1,2} registers
tracing: Add __print_dynamic_array() helper
x86/mce: Add wrapper for struct mce to export vendor specific info
x86/mce/intel: Use MCG_BANKCNT_MASK instead of 0xff
x86/mce/mcelog: Use xchg() to get and clear the flags
|
||
|
Linus Torvalds
|
8350142a4b |
for-6.13/io_uring-20241118
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmc7S3kQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpjHVEAC+CITBEcGy+S0IK0BpIAhuA+A621LtqBwy 0z/4MZKXMqvWxcFGQJ9Zr8MvxUnY4KFcssiaR5zk+I9TczNu7mLMuPYD1Gb0Klgz mwuFOylo1CAAC41IABYZZ/0qWbTaW0p8tpaGsTbTNk3tBxuMLB550+APAqC1OE9U bb7rP+FHc5+YGI9/7JNWt7NNTSHvVSO6oxjltCxHr1dRg93Jtr2jaY6letY3epFz TCFyfJlDtK8fPwtYRyG51M4g2Vdp9/4qsfPqvnXwUr9MdWaVh5/TFkyvqDi5sCKM zdK/sjRiimYzvqqKg6bzgYscITUPNk2TG6ZJq5U1L7lrglzVY69c7GIUnNzPrL/y AxQsR5Guxz3bRNYWZ4BKJDH+NNB+cgIFEXDsv72qoUy3HTzA6wOPZYxfjhZhKuG/ DjRwM7NGx5oPiKtpK99IulZttXdmtkH0csuLwKmOzrQskQdTuWyrEtU7UQql7oQ5 Rt3DhMXouzYZMicB8U5Q9gO2I3WN+2VVxXl4sa00LG8KsT6PzLnz4Q2k/1c83S6J rRivRbZAbZ1+BqKvF8T7GgzLCeaLgzbeoxmxj6xr87pf3SYEs2KhQeQ+n/C0HTOt GOcG1+bvh7t2aSvlBPKVCExWI4erwG6wXFhfGKsLW9CmwIMqRNxdePpRWe3Cueyp M3QRJuvTxQ== =bDvp -----END PGP SIGNATURE----- Merge tag 'for-6.13/io_uring-20241118' of git://git.kernel.dk/linux Pull io_uring updates from Jens Axboe: - Cleanups of the eventfd handling code, making it fully private. - Support for sending a sync message to another ring, without having a ring available to send a normal async message. - Get rid of the separate unlocked hash table, unify everything around the single locked one. - Add support for ring resizing. It can be hard to appropriately size the CQ ring upfront, if the application doesn't know how busy it will be. This results in applications sizing rings for the most busy case, which can be wasteful. With ring resizing, they can start small and grow the ring, if needed. - Add support for fixed wait regions, rather than needing to copy the same wait data tons of times for each wait operation. - Rewrite the resource node handling, which before was serialized per ring. This caused issues with particularly fixed files, where one file waiting on IO could hold up putting and freeing of other unrelated files. Now each node is handled separately. New code is much simpler too, and was a net 250 line reduction in code. - Add support for just doing partial buffer clones, rather than always cloning the entire buffer table. - Series adding static NAPI support, where a specific NAPI instance is used rather than having a list of them available that need lookup. - Add support for mapped regions, and also convert the fixed wait support mentioned above to that concept. This avoids doing special mappings for various planned features, and folds the existing registered wait into that too. - Add support for hybrid IO polling, which is a variant of strict IOPOLL but with an initial sleep delay to avoid spinning too early and wasting resources on devices that aren't necessarily in the < 5 usec category wrt latencies. - Various cleanups and little fixes. * tag 'for-6.13/io_uring-20241118' of git://git.kernel.dk/linux: (79 commits) io_uring/region: fix error codes after failed vmap io_uring: restore back registered wait arguments io_uring: add memory region registration io_uring: introduce concept of memory regions io_uring: temporarily disable registered waits io_uring: disable ENTER_EXT_ARG_REG for IOPOLL io_uring: fortify io_pin_pages with a warning switch io_msg_ring() to CLASS(fd) io_uring: fix invalid hybrid polling ctx leaks io_uring/uring_cmd: fix buffer index retrieval io_uring/rsrc: add & apply io_req_assign_buf_node() io_uring/rsrc: remove '->ctx_ptr' of 'struct io_rsrc_node' io_uring/rsrc: pass 'struct io_ring_ctx' reference to rsrc helpers io_uring: avoid normal tw intermediate fallback io_uring/napi: add static napi tracking strategy io_uring/napi: clean up __io_napi_do_busy_loop io_uring/napi: Use lock guards io_uring/napi: improve __io_napi_add io_uring/napi: fix io_napi_entry RCU accesses io_uring/napi: protect concurrent io_napi_entry timeout accesses ... |
||
|
Linus Torvalds
|
77a0cfafa9 |
for-6.13/block-20241118
-----BEGIN PGP SIGNATURE-----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=PWTH
-----END PGP SIGNATURE-----
Merge tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)
- MD updates via Song:
- Maintainers update
- raid5 sync IO fix
- Enhance handling of faulty and blocked devices
- raid5-ppl atomic improvement
- md-bitmap fix
- Support for manually defining embedded partition tables
- Zone append fixes and cleanups
- Stop sending the queued requests in the plug list to the driver
->queue_rqs() handle in reverse order.
- Zoned write plug cleanups
- Cleanups disk stats tracking and add support for disk stats for
passthrough IO
- Add preparatory support for file system atomic writes
- Add lockdep support for queue freezing. Already found a bunch of
issues, and some fixes for that are in here. More will be coming.
- Fix race between queue stopping/quiescing and IO queueing
- ublk recovery improvements
- Fix ublk mmap for 64k pages
- Various fixes and cleanups
* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
MAINTAINERS: Update git tree for mdraid subsystem
block: make struct rq_list available for !CONFIG_BLOCK
block/genhd: use seq_put_decimal_ull for diskstats decimal values
block: don't reorder requests in blk_mq_add_to_batch
block: don't reorder requests in blk_add_rq_to_plug
block: add a rq_list type
block: remove rq_list_move
virtio_blk: reverse request order in virtio_queue_rqs
nvme-pci: reverse request order in nvme_queue_rqs
btrfs: validate queue limits
block: export blk_validate_limits
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
md/raid5: Increase r5conf.cache_name size
block: remove the ioprio field from struct request
block: remove the write_hint field from struct request
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
...
|
||
|
Linus Torvalds
|
c14a8a4c04 |
for-6.13-tag
-----BEGIN PGP SIGNATURE-----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=aAcf
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Changes outside of btrfs: add io_uring command flag to track a dying
task (the rest will go via the block git tree).
User visible changes:
- wire encoded read (ioctl) to io_uring commands, this can be used on
itself, in the future this will allow 'send' to be asynchronous. As
a consequence, the encoded read ioctl can also work in non-blocking
mode
- new ioctl to wait for cleaned subvolumes, no need to use the
generic and root-only SEARCH_TREE ioctl, will be used by "btrfs
subvol sync"
- recognize different paths/symlinks for the same devices and don't
report them during rescanning, this can be observed with LVM or DM
- seeding device use case change, the sprout device (the one
capturing new writes) will not clear the read-only status of the
super block; this prevents accumulating space from deleted
snapshots
Performance improvements:
- reduce lock contention when traversing extent buffers
- reduce extent tree lock contention when searching for inline
backref
- switch from rb-trees to xarray for delayed ref tracking,
improvements due to better cache locality, branching factors and
more compact data structures
- enable extent map shrinker again (prevent memory exhaustion under
some types of IO load), reworked to run in a single worker thread
(there used to be problems causing long stalls under memory
pressure)
Core changes:
- raid-stripe-tree feature updates:
- make device replace and scrub work
- implement partial deletion of stripe extents
- new selftests
- split the config option BTRFS_DEBUG and add EXPERIMENTAL for
features that are experimental or with known problems so we don't
misuse debugging config for that
- subpage mode updates (sector < page):
- update compression implementations
- update writepage, writeback
- continued folio API conversions:
- buffered writes
- make buffered write copy one page at a time, preparatory work for
future integration with large folios, may cause performance drop
- proper locking of root item regarding starting send
- error handling improvements
- code cleanups and refactoring:
- dead code removal
- unused parameter reduction
- lockdep assertions"
* tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (119 commits)
btrfs: send: check for read-only send root under critical section
btrfs: send: check for dead send root under critical section
btrfs: remove check for NULL fs_info at btrfs_folio_end_lock_bitmap()
btrfs: fix warning on PTR_ERR() against NULL device at btrfs_control_ioctl()
btrfs: fix a typo in btrfs_use_zone_append
btrfs: avoid superfluous calls to free_extent_map() in btrfs_encoded_read()
btrfs: simplify logic to decrement snapshot counter at btrfs_mksnapshot()
btrfs: remove hole from struct btrfs_delayed_node
btrfs: update stale comment for struct btrfs_delayed_ref_node::add_list
btrfs: add new ioctl to wait for cleaned subvolumes
btrfs: simplify range tracking in cow_file_range()
btrfs: remove conditional path allocation in btrfs_read_locked_inode()
btrfs: push cleanup into btrfs_read_locked_inode()
io_uring/cmd: let cmds to know about dying task
btrfs: add struct io_btrfs_cmd as type for io_uring_cmd_to_pdu()
btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)
btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()
btrfs: don't sleep in btrfs_encoded_read() if IOCB_NOWAIT is set
btrfs: change btrfs_encoded_read() so that reading of extent is done by caller
btrfs: remove pointless iocb::ki_pos addition in btrfs_encoded_read()
...
|
||
|
Linus Torvalds
|
8dcf44fcad |
vfs-6.13.netfs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcUoQAKCRCRxhvAZXjc
omxAAP9WE8zSxeu7Foa6+OmLO62mYdB8rRrQ4OjzX+zunL0UnAD9FAHPsB4amWm4
/zK3Nf7ipijop5+RgSJTgURffASKOgI=
=ifkk
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"Various fixes for the netfs library and related infrastructure:
cachefiles:
- Fix a dentry leak in cachefiles_open_file()
- Fix incorrect length return value in
cachefiles_ondemand_fd_write_iter()
- Fix missing pos updates in cachefiles_ondemand_fd_write_iter()
- Clean up in cachefiles_commit_tmpfile()
- Fix NULL pointer dereference in object->file
- Add a memory barrier for FSCACHE_VOLUME_CREATING
netfs:
- Remove call to folio_index()
- Fix a few minor bugs in netfs_page_mkwrite()
- Remove unnecessary references to pages"
* tag 'vfs-6.13.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING
cachefiles: Fix NULL pointer dereference in object->file
cachefiles: Clean up in cachefiles_commit_tmpfile()
cachefiles: Fix missing pos updates in cachefiles_ondemand_fd_write_iter()
cachefiles: Fix incorrect length return value in cachefiles_ondemand_fd_write_iter()
netfs: Remove unnecessary references to pages
netfs: Fix a few minor bugs in netfs_page_mkwrite()
netfs: Remove call to folio_index()
|
||
|
Linus Torvalds
|
70e7730c2a |
vfs-6.13.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcToAAKCRCRxhvAZXjc
osL9AP948FFumJRC28gDJ4xp+X4eohNOfkgoEG8FTbF2zU6ulwD+O0pr26FqpFli
pqlG+38UdATImpfqqWjPbb72sBYcfQg=
=wLUh
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Fixup and improve NLM and kNFSD file lock callbacks
Last year both GFS2 and OCFS2 had some work done to make their
locking more robust when exported over NFS. Unfortunately, part of
that work caused both NLM (for NFS v3 exports) and kNFSD (for
NFSv4.1+ exports) to no longer send lock notifications to clients
This in itself is not a huge problem because most NFS clients will
still poll the server in order to acquire a conflicted lock
It's important for NLM and kNFSD that they do not block their
kernel threads inside filesystem's file_lock implementations
because that can produce deadlocks. We used to make sure of this by
only trusting that posix_lock_file() can correctly handle blocking
lock calls asynchronously, so the lock managers would only setup
their file_lock requests for async callbacks if the filesystem did
not define its own lock() file operation
However, when GFS2 and OCFS2 grew the capability to correctly
handle blocking lock requests asynchronously, they started
signalling this behavior with EXPORT_OP_ASYNC_LOCK, and the check
for also trusting posix_lock_file() was inadvertently dropped, so
now most filesystems no longer produce lock notifications when
exported over NFS
Fix this by using an fop_flag which greatly simplifies the problem
and grooms the way for future uses by both filesystems and lock
managers alike
- Add a sysctl to delete the dentry when a file is removed instead of
making it a negative dentry
Commit
|
||
|
Linus Torvalds
|
6ac81fd55e |
vfs-6.13.mgtime
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcScQAKCRCRxhvAZXjc
oj+5AP4k822a77wc/3iPFk379naIvQ4dsrgemh0/Pb6ZvzvkFQEAi3vFCfzCDR2x
SkJF/RwXXKZv6U31QXMRt2Qo6wfBuAc=
=nVlm
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.mgtime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs multigrain timestamps from Christian Brauner:
"This is another try at implementing multigrain timestamps. This time
with significant help from the timekeeping maintainers to reduce the
performance impact.
Thomas provided a base branch that contains the required timekeeping
interfaces for the VFS. It serves as the base for the multi-grain
timestamp work:
- Multigrain timestamps allow the kernel to use fine-grained
timestamps when an inode's attributes is being actively observed
via ->getattr(). With this support, it's possible for a file to get
a fine-grained timestamp, and another modified after it to get a
coarse-grained stamp that is earlier than the fine-grained time. If
this happens then the files can appear to have been modified in
reverse order, which breaks VFS ordering guarantees.
To prevent this, a floor value is maintained for multigrain
timestamps. Whenever a fine-grained timestamp is handed out, record
it, and when later coarse-grained stamps are handed out, ensure
they are not earlier than that value. If the coarse-grained
timestamp is earlier than the fine-grained floor, return the floor
value instead.
The timekeeper changes add a static singleton atomic64_t into
timekeeper.c that is used to keep track of the latest fine-grained
time ever handed out. This is tracked as a monotonic ktime_t value
to ensure that it isn't affected by clock jumps. Because it is
updated at different times than the rest of the timekeeper object,
the floor value is managed independently of the timekeeper via a
cmpxchg() operation, and sits on its own cacheline.
Two new public timekeeper interfaces are added:
(1) ktime_get_coarse_real_ts64_mg() fills a timespec64 with the
later of the coarse-grained clock and the floor time
(2) ktime_get_real_ts64_mg() gets the fine-grained clock value,
and tries to swap it into the floor. A timespec64 is filled
with the result.
- The VFS has always used coarse-grained timestamps when updating the
ctime and mtime after a change. This has the benefit of allowing
filesystems to optimize away a lot metadata updates, down to around
1 per jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting
via NFSv3, which relies on timestamps to validate caches. A lot of
changes can happen in a jiffy, so timestamps aren't sufficient to
help the client decide when to invalidate the cache. Even with
NFSv4, a lot of exported filesystems don't properly support a
change attribute and are subject to the same problems with
timestamp granularity. Other applications have similar issues with
timestamps (e.g backup applications).
If we were to always use fine-grained timestamps, that would
improve the situation, but that becomes rather expensive, as the
underlying filesystem would have to log a lot more metadata
updates.
This adds a way to only use fine-grained timestamps when they are
being actively queried. Use the (unused) top bit in
inode->i_ctime_nsec as a flag that indicates whether the current
timestamps have been queried via stat() or the like. When it's set,
we allow the kernel to use a fine-grained timestamp iff it's
necessary to make the ctime show a different value.
This solves the problem of being able to distinguish the timestamp
between updates, but introduces a new problem: it's now possible
for a file being changed to get a fine-grained timestamp. A file
that is altered just a bit later can then get a coarse-grained one
that appears older than the earlier fine-grained time. This
violates timestamp ordering guarantees.
This is where the earlier mentioned timkeeping interfaces help. A
global monotonic atomic64_t value is kept that acts as a timestamp
floor. When we go to stamp a file, we first get the latter of the
current floor value and the current coarse-grained time. If the
inode ctime hasn't been queried then we just attempt to stamp it
with that value.
If it has been queried, then first see whether the current coarse
time is later than the existing ctime. If it is, then we accept
that value. If it isn't, then we get a fine-grained time and try to
swap that into the global floor. Whether that succeeds or fails, we
take the resulting floor time, convert it to realtime and try to
swap that into the ctime.
We take the result of the ctime swap whether it succeeds or fails,
since either is just as valid.
Filesystems can opt into this by setting the FS_MGTIME fstype flag.
Others should be unaffected (other than being subject to the same
floor value as multigrain filesystems)"
* tag 'vfs-6.13.mgtime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reduce pointer chasing in is_mgtime() test
tmpfs: add support for multigrain timestamps
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
Documentation: add a new file documenting multigrain timestamps
fs: add percpu counters for significant multigrain timestamp events
fs: tracepoints around multigrain timestamp events
fs: handle delegated timestamps in setattr_copy_mgtime
timekeeping: Add percpu counter for tracking floor swap events
timekeeping: Add interfaces for handling timestamps with a floor value
fs: have setattr_copy handle multigrain timestamps appropriately
fs: add infrastructure for multigrain timestamps
|
||
|
Xianglai Li
|
948ccbd950 |
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
Add iocsr and mmio memory read and write simulation to the kernel. When the VM accesses the device address space through iocsr instructions or mmio, it does not need to return to the qemu user mode but can directly completes the access in the kernel mode. Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn> Signed-off-by: Xianglai Li <lixianglai@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Christoph Hellwig
|
6975c1a486 |
block: remove the ioprio field from struct request
The request ioprio is only initialized from the first attached bio, so requests without a bio already never set it. Directly use the bio field instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241112170050.1612998-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Vlastimil Babka
|
9b5c87d479 |
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
Since
|
||
|
David Howells
|
8b9a7bd4d6 |
rxrpc: Add a tracepoint for aborts being proposed
Add a tracepoint to rxrpc to trace the proposal of an abort. The abort is performed asynchronously by the I/O thread. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/726356.1730898045@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Filipe Manana
|
e7fa845010 |
btrfs: rename extent map shrinker members from struct btrfs_fs_info
The names for the members of struct btrfs_fs_info related to the extent map shrinker are a bit too long, so rename them to be shorter by replacing the "extent_map_" prefix with the "em_" prefix. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
70a5f9e266 |
btrfs: simplify tracking progress for the extent map shrinker
Now that the extent map shrinker can only be run by a single task (as a work queue item) there is no need to keep the progress of the shrinker protected by a spinlock and passing the progress to trace events as parameters. So remove the lock and simplify the arguments for the trace events. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Dr. David Alan Gilbert
|
b628c13951 |
btrfs: remove unused btrfs_try_tree_write_lock()
btrfs_try_tree_write_lock() has been unused since commit
|
||
|
Filipe Manana
|
c28b97f53b |
btrfs: qgroups: remove bytenr field from struct btrfs_qgroup_extent_record
Now that we track qgroup extent records in a xarray we don't need to have a "bytenr" field in struct btrfs_qgroup_extent_record, since we can get it from the index of the record in the xarray. So remove the field and grab the bytenr from either the index key or any other place where it's available (delayed refs). This reduces the size of struct btrfs_qgroup_extent_record from 40 bytes down to 32 bytes, meaning that we now can store 128 instances of this structure instead of 102 per 4K page. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
JP Kobryn
|
f914ac96ee |
memcg: add flush tracepoint
This tracepoint gives visibility on how often the flushing of memcg stats occurs and contains info on whether it was forced, skipped, and the value of stats updated. It can help with understanding how readers are affected by having to perform the flush, and the effectiveness of the flush by inspecting the number of stats updated. Paired with the recently added tracepoints for tracing rstat updates, it can also help show correlation where stats exceed thresholds frequently. Link: https://lkml.kernel.org/r/20241029021106.25587-3-inwardvessel@gmail.com Signed-off-by: JP Kobryn <inwardvessel@gmail.com> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Jeff Layton
|
93970b6a14 |
sunrpc: remove newlines from tracepoints
Tracepoint strings don't require newlines (and in fact, they are undesirable). Signed-off-by: Jeff Layton <jlayton@kernel.org> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> |
||
|
Linus Torvalds
|
bfc64d9b7e |
Including fixes from can and netfilter.
Things are slowing down quite a bit, mostly driver fixes here.
No known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed
in a refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing configuration
when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=iWv1
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can and netfilter.
Things are slowing down quite a bit, mostly driver fixes here. No
known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed in a
refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
configuration when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64"
* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
net/smc: do not leave a dangling sk pointer in __smc_create()
rxrpc: Fix missing locking causing hanging calls
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
net: arc: rockchip: fix emac mdio node support
net: arc: fix the device for dma_map_single/dma_unmap_single
virtio_net: Update rss when set queue
virtio_net: Sync rss config to device when virtnet_probe
virtio_net: Add hash_key_length check
virtio_net: Support dynamic rss indirection table size
netfilter: nf_tables: wait for rcu grace period on net_device removal
net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
net: vertexcom: mse102x: Fix possible double free of TX skb
mptcp: use sock_kfree_s instead of kfree
mptcp: no admin perm to list endpoints
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
net: hns3: fix kernel crash when uninstalling driver
Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
...
|
||
|
David Howells
|
fc9de52de3 |
rxrpc: Fix missing locking causing hanging calls
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Fixes:
|
||
|
Jaewon Kim
|
1f2d03cc53 |
vmscan: add a vmscan event for reclaim_pages
reclaim_folio_list uses a dummy reclaim_stat and is not being used. To know the memory stat, add a new trace event. This is useful how how many pages are not reclaimed or why. This is an example: mm_vmscan_reclaim_pages: nid=0 nr_scanned=112 nr_reclaimed=112 nr_dirty=0 nr_writeback=0 nr_congested=0 nr_immediate=0 nr_activate_anon=0 nr_activate_file=0 nr_ref_keep=0 nr_unmap_fail=0 Currently reclaim_folio_list is only called by reclaim_pages, and reclaim_pages is used by damon and madvise. In the latest Android, reclaim_pages is also used by shmem to reclaim all pages in a address_space. [jaewon31.kim@samsung.com: use sc.nr_scanned rather than new counting] Link: https://lkml.kernel.org/r/20241016143227.961162-1-jaewon31.kim@samsung.com Link: https://lkml.kernel.org/r/20241011124928.1224813-1-jaewon31.kim@samsung.com Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jaewon Kim <jaewon31.kim@samsung.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Shakeel Butt
|
0aa3ef3637 |
memcg: add tracing for memcg stat updates
The memcg stats are maintained in rstat infrastructure which provides very fast updates side and reasonable read side. However memcg added plethora of stats and made the read side, which is cgroup rstat flush, very slow. To solve that, threshold was added in the memcg stats read side i.e. no need to flush the stats if updates are within the threshold. This threshold based improvement worked for sometime but more stats were added to memcg and also the read codepath was getting triggered in the performance sensitive paths which made threshold based ratelimiting ineffective. We need more visibility into the hot and cold stats i.e. stats with a lot of updates. Let's add trace to get that visibility. [shakeel.butt@linux.dev: use unsigned long type for memcg_rstat_events, per Yosry] Link: https://lkml.kernel.org/r/20241015213721.3804209-1-shakeel.butt@linux.dev Link: https://lkml.kernel.org/r/20241010003550.3695245-1-shakeel.butt@linux.dev Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: T.J. Mercier <tjmercier@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: JP Kobryn <inwardvessel@gmail.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Alice Ryhl
|
91d39024e1 |
rust: samples: add tracepoint to Rust sample
This updates the Rust printing sample to invoke a tracepoint. This ensures that we have a user in-tree from the get-go even though the patch is being merged before its real user. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Cc: Gary Guo <gary@garyguo.net> Cc: " =?utf-8?q?Bj=C3=B6rn_Roy_Baron?= " <bjorn3_gh@protonmail.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: Andreas Hindborg <a.hindborg@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Uros Bizjak <ubizjak@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anup Patel <apatel@ventanamicro.com> Cc: Andrew Jones <ajones@ventanamicro.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Conor Dooley <conor.dooley@microchip.com> Cc: Samuel Holland <samuel.holland@sifive.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Bibo Mao <maobibo@loongson.cn> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tianrui Zhao <zhaotianrui@loongson.cn> Link: https://lore.kernel.org/20241030-tracepoint-v12-3-eec7f0f8ad22@google.com Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Alice Ryhl
|
ad37bcd965 |
rust: add tracepoint support
Make it possible to have Rust code call into tracepoints defined by C code. It is still required that the tracepoint is declared in a C header, and that this header is included in the input to bindgen. Instead of calling __DO_TRACE directly, the exported rust_do_trace_ function calls an inline helper function. This is because the `cond` argument does not exist at the callsite of DEFINE_RUST_DO_TRACE. __DECLARE_TRACE always emits an inline static and an extern declaration that is only used when CREATE_RUST_TRACE_POINTS is set. These should not end up in the final binary so it is not a problem that they sometimes are emitted without a user. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Cc: " =?utf-8?q?Bj=C3=B6rn_Roy_Baron?= " <bjorn3_gh@protonmail.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: Andreas Hindborg <a.hindborg@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Uros Bizjak <ubizjak@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anup Patel <apatel@ventanamicro.com> Cc: Andrew Jones <ajones@ventanamicro.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Conor Dooley <conor.dooley@microchip.com> Cc: Samuel Holland <samuel.holland@sifive.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Bibo Mao <maobibo@loongson.cn> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tianrui Zhao <zhaotianrui@loongson.cn> Link: https://lore.kernel.org/20241030-tracepoint-v12-2-eec7f0f8ad22@google.com Reviewed-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Mathieu Desnoyers
|
654ced4a13 |
tracing: Introduce tracepoint_is_faultable()
Introduce a "faultable" flag within the extended structure to know whether a tracepoint needs rcu tasks trace grace period before reclaim. This can be queried using tracepoint_is_faultable(). Acked-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Jordan Rife <jrife@google.com> Cc: Michael Jeanson <mjeanson@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: bpf@vger.kernel.org Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Jordan Rife <jrife@google.com> Cc: linux-trace-kernel@vger.kernel.org Link: https://lore.kernel.org/20241031152056.744137-3-mathieu.desnoyers@efficios.com Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
d56239a82e |
vfs-6.12-rc6.fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZyTGAQAKCRCRxhvAZXjc
opd6AQCal4omyfS8FYe4VRRZ/0XHouagq99I0U0TAmKkvoKAsgD/XrdE+pSTEkPX
Pv4T9phh1cZRxcyKVu77UoYkuHJEDAg=
=Lu9R
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull filesystem fixes from Christian Brauner:
"VFS:
- Fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP=y is set
- Add a get_tree_bdev_flags() helper that allows to modify e.g.,
whether errors are logged into the filesystem context during
superblock creation. This is used by erofs to fix a userspace
regression where an error is currently logged when its used on a
regular file which is an new allowed mode in erofs.
netfs:
- Fix the sysfs debug path in the documentation.
- Fix iov_iter_get_pages*() for folio queues by skipping the page
extracation if we're at the end of a folio.
afs:
- Fix moving subdirectories to different parent directory.
autofs:
- Fix handling of AUTOFS_DEV_IOCTL_TIMEOUT_CMD ioctl in
validate_dev_ioctl(). The actual ioctl number, not the ioctl
command needs to be checked for autofs"
* tag 'vfs-6.12-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP
autofs: fix thinko in validate_dev_ioctl()
iov_iter: Fix iov_iter_get_pages*() for folio_queue
afs: Fix missing subdir edit when renamed between parent dirs
doc: correcting the debug path for cachefiles
erofs: use get_tree_bdev_flags() to avoid misleading messages
fs/super.c: introduce get_tree_bdev_flags()
|
||
|
Avadhut Naik
|
d4fca1358e |
x86/MCE/AMD: Add support for new MCA_SYND{1,2} registers
Starting with Zen4, AMD's Scalable MCA systems incorporate two new registers: MCA_SYND1 and MCA_SYND2. These registers will include supplemental error information in addition to the existing MCA_SYND register. The data within these registers is considered valid if MCA_STATUS[SyndV] is set. Userspace error decoding tools like rasdaemon gather related hardware error information through the tracepoints. Therefore, export these two registers through the mce_record tracepoint so that tools like rasdaemon can parse them and output the supplemental error information like FRU text contained in them. [ bp: Massage. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Avadhut Naik <avadhut.naik@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20241022194158.110073-4-avadhut.naik@amd.com |
||
|
Steven Rostedt
|
e52750fb14 |
tracing: Add __print_dynamic_array() helper
When printing a dynamic array in a trace event, the method is rather ugly.
It has the format of:
__print_array(__get_dynamic_array(array),
__get_dynmaic_array_len(array) / el_size, el_size)
Since dynamic arrays are known to the tracing infrastructure, create a
helper macro that does the above for you.
__print_dynamic_array(array, el_size)
Which would expand to the same output.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/r/20241022194158.110073-3-avadhut.naik@amd.com
|
||
|
Avadhut Naik
|
750fd23926 |
x86/mce: Add wrapper for struct mce to export vendor specific info
Currently, exporting new additional machine check error information involves adding new fields for the same at the end of the struct mce. This additional information can then be consumed through mcelog or tracepoint. However, as new MSRs are being added (and will be added in the future) by CPU vendors on their newer CPUs with additional machine check error information to be exported, the size of struct mce will balloon on some CPUs, unnecessarily, since those fields are vendor-specific. Moreover, different CPU vendors may export the additional information in varying sizes. The problem particularly intensifies since struct mce is exposed to userspace as part of UAPI. It's bloating through vendor-specific data should be avoided to limit the information being sent out to userspace. Add a new structure mce_hw_err to wrap the existing struct mce. The same will prevent its ballooning since vendor-specifc data, if any, can now be exported through a union within the wrapper structure and through __dynamic_array in mce_record tracepoint. Furthermore, new internal kernel fields can be added to the wrapper struct without impacting the user space API. [ bp: Restore reverse x-mas tree order of function vars declarations. ] Suggested-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Avadhut Naik <avadhut.naik@amd.com> Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20241022194158.110073-2-avadhut.naik@amd.com |
||
|
Pavel Begunkov
|
2946f08ae9 |
io_uring: clean up cqe trace points
We have too many helpers posting CQEs, instead of tracing completion events before filling in a CQE and thus having to pass all the data, set the CQE first, pass it to the tracing helper and let it extract everything it needs. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/b83c1ca9ee5aed2df0f3bb743bf5ed699cce4c86.1729267437.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Sean Anderson
|
68b6dbf1f4 |
dma-mapping: trace more error paths
It can be surprising to the user if DMA functions are only traced on success. On failure, it can be unclear what the source of the problem is. Fix this by tracing all functions even when they fail. Cases where we BUG/WARN are skipped, since those should be sufficiently noisy already. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Sean Anderson
|
c4484ab86e |
dma-mapping: use trace_dma_alloc for dma_alloc* instead of using trace_dma_map
In some cases, we use trace_dma_map to trace dma_alloc* functions. This generally follows dma_debug. However, this does not record all of the relevant information for allocations, such as GFP flags. Create new dma_alloc tracepoints for these functions. Note that while dma_alloc_noncontiguous may allocate discontiguous pages (from the CPU's point of view), the device will only see one contiguous mapping. Therefore, we just need to trace dma_addr and size. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Sean Anderson
|
3afff779a7 |
dma-mapping: trace dma_alloc/free direction
In preparation for using these tracepoints in a few more places, trace the DMA direction as well. For coherent allocations this is always bidirectional. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Sean Anderson
|
5af5fc895f |
dma-mapping: use macros to define events in a class
Use a macro to avoid repeating the parameters and arguments for each event in a class. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Uwe Kleine-König
|
acf2b31489 |
pwm: Support for duty_offset
Support a new abstraction for pwm configuration that allows to specify
the time between start of period and the raising edge of the signal
("duty offset").
This is used in a patch series by Trevor Gamblin for triggering an ADC
conversion and afterwards read out the result. See
https://lore.kernel.org/linux-iio/20240909-ad7625_r1-v5-0-60a397768b25@baylibre.com/
for more details.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmcDeZsACgkQj4D7WH0S
/k7gqwf+LcXVzZ9APuhh7hYVMBKvM0f0VhihGBlTS/1hXdA/807Ooe0+VIlxAdBi
im6nIQzS6JWwkowYro0MRB5JWQgRUwDMdwhIKP8lFU+jRZs+TOjeCGs6bolgw+26
rLd7hpWTo3m9PD0Hp+y8xQq999ALaBIcAtrJM/Mop7YKa2FJvTwLtirH9rOImDVc
Vkdx36N870gzOAUSNSghWlSFATJp2fWc7T51XhBLBzVShZQ6cCy9oRJ8mZdPjcf0
hq8HwhVkKHMZidYo9KZpa10qz5S4diLUt6yr01LcmSNGgoqsWHWPFhcmAn2j64ok
pmC8NxY0HSgwgkxQxjDmBZe3eW2Wiw==
=C4Cy
-----END PGP SIGNATURE-----
Merge tag 'pwm/duty_offset-for-6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
pwm: Support for duty_offset
Support a new abstraction for pwm configuration that allows to specify
the time between start of period and the raising edge of the signal
("duty offset").
This is used in a patch series by Trevor Gamblin for triggering an ADC
conversion and afterwards read out the result. See
https://lore.kernel.org/linux-iio/20240909-ad7625_r1-v5-0-60a397768b25@baylibre.com/
for more details.
|
||
|
David Howells
|
247d65fb12
|
afs: Fix missing subdir edit when renamed between parent dirs
When rename moves an AFS subdirectory between parent directories, the
subdir also needs a bit of editing: the ".." entry needs updating to point
to the new parent (though I don't make use of the info) and the DV needs
incrementing by 1 to reflect the change of content. The server also sends
a callback break notification on the subdirectory if we have one, but we
can take care of recovering the promise next time we access the subdir.
This can be triggered by something like:
mount -t afs %example.com:xfstest.test20 /xfstest.test/
mkdir /xfstest.test/{aaa,bbb,aaa/ccc}
touch /xfstest.test/bbb/ccc/d
mv /xfstest.test/{aaa/ccc,bbb/ccc}
touch /xfstest.test/bbb/ccc/e
When the pathwalk for the second touch hits "ccc", kafs spots that the DV
is incorrect and downloads it again (so the fix is not critical).
Fix this, if the rename target is a directory and the old and new
parents are different, by:
(1) Incrementing the DV number of the target locally.
(2) Editing the ".." entry in the target to refer to its new parent's
vnode ID and uniquifier.
Link: https://lore.kernel.org/r/3340431.1729680010@warthog.procyon.org.uk
Fixes:
|
||
|
Linus Torvalds
|
7166c32651 |
vfs-6.12-rc5.fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZxY6XAAKCRCRxhvAZXjc
opmUAQCu4KhzBBdZmFw3AfZFNJvYb1onT4FiU0pnyGgfvzEdEwD6AlnlgQ7DL3ZN
WBqBzUl+DpGYJfzhkqoEGH89Fagx7QM=
=mm68
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"afs:
- Fix a lock recursion in afs_wake_up_async_call() on ->notify_lock
netfs:
- Drop the references to a folio immediately after the folio has been
extracted to prevent races with future I/O collection
- Fix a documenation build error
- Downgrade the i_rwsem for buffered writes to fix a cifs reported
performance regression when switching to netfslib
vfs:
- Explicitly return -E2BIG from openat2() if the specified size is
unexpectedly large. This aligns openat2() with other extensible
struct based system calls
- When copying a mount namespace ensure that we only try to remove
the new copy from the mount namespace rbtree if it has already been
added to it
nilfs:
- Clear the buffer delay flag when clearing the buffer state clags
when a buffer head is discarded to prevent a kernel OOPs
ocfs2:
- Fix an unitialized value warning in ocfs2_setattr()
proc:
- Fix a kernel doc warning"
* tag 'vfs-6.12-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
proc: Fix W=1 build kernel-doc warning
afs: Fix lock recursion
fs: Fix uninitialized value issue in from_kuid and from_kgid
fs: don't try and remove empty rbtree node
netfs: Downgrade i_rwsem for a buffered write
nilfs2: fix kernel bug due to missing clearing of buffer delay flag
openat2: explicitly return -E2BIG for (usize > PAGE_SIZE)
netfs: fix documentation build error
netfs: In readahead, put the folio refs as soon extracted
|
||
|
Linus Torvalds
|
10e93e1900 |
dma-mapping fix for Linux 6.12
Just another small tracing fix from Sean. -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmcUhhoLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYPzww//XpnJtQ2glWj9MZAbrPAHsBooazaIae1wfxPXCb9u EzaookDsTZhVtS0buSH9+EcNC5fWsr7Q7wyazx4cmGl6wOdHZ6mq+YbpxGQmhgWe MHDXu/X+rCRsa4cU5X8LUCjWVpKsu0kQE2B3E7M6cYfCWH9r1r9jaW0uXxdTQRWf Yi6W43cL/G946aT76wTspFrCfBqLgxypuTPGgehHpbF99sC/eJ6YHzGkOxc+mZ/5 AatMB/npW8Y0G38yScp6gJZ4XaetJ6hflXoFN1pR7ehDggmZAjM/WfPwFlqZgjbk sVL0GjLuE4kbLnXIWX7GzzY/sXlUbebIKkAiYw3uqeo3KchU8/pA2Cqb9qWzdQmf FkMJQO7rgj7BvlJnxccDVAZYedkoywdj4Jw/B8hnm5jF355g4tZDmXm+4A88KtHZ qnz7pBNdfFumyMEJFwUzOAMWyN2ZDdirb3lrDsCXlIV56h4NH60I6D+cAsX9a+94 Qao0xLr72jlk4NNDQShYJgHybCVTMMep3Wjkejg/EEZCxdkkyMpSOZXJeBLlxn80 O2fdRynM5EhG+e28pjFYvU+/zLT0poSRaE+jBfWJLtG9xCFMybWRKtASH7VcaRLQ /kDPR51ZttfNYQscVWi7S+R37VWksPLEbFQHSFDvOcwGKgcnFpllDuwv+o62TuUc eKk= =MnDt -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.12-2024-10-20' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: "Just another small tracing fix from Sean" * tag 'dma-mapping-6.12-2024-10-20' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: fix tracing dma_alloc/free with vmalloc'd memory |
||
|
Sean Anderson
|
78b2770c93 |
dma-mapping: fix tracing dma_alloc/free with vmalloc'd memory
Not all virtual addresses have physical addresses, such as if they were
vmalloc'd. Just trace the virtual address instead of trying to trace a
physical address. This aligns with the API, and is good enough to
associate dma_alloc with dma_free.
Fixes:
|
||
|
Yang Shi
|
37f0b47c51 |
mm: khugepaged: fix the arguments order in khugepaged_collapse_file trace point
The "addr" and "is_shmem" arguments have different order in TP_PROTO and
TP_ARGS. This resulted in the incorrect trace result:
text-hugepage-644429 [276] 392092.878683: mm_khugepaged_collapse_file:
mm=0xffff20025d52c440, hpage_pfn=0x200678c00, index=512, addr=1, is_shmem=0,
filename=text-hugepage, nr=512, result=failed
The value of "addr" is wrong because it was treated as bool value, the
type of is_shmem.
Fix the order in TP_PROTO to keep "addr" is before "is_shmem" since the
original patch review suggested this order to achieve best packing.
And use "lx" for "addr" instead of "ld" in TP_printk because address is
typically shown in hex.
After the fix, the trace result looks correct:
text-hugepage-7291 [004] 128.627251: mm_khugepaged_collapse_file:
mm=0xffff0001328f9500, hpage_pfn=0x20016ea00, index=512, addr=0x400000,
is_shmem=0, filename=text-hugepage, nr=512, result=failed
Link: https://lkml.kernel.org/r/20241012011702.1084846-1-yang@os.amperecomputing.com
Fixes:
|
||
|
Christian Brauner
|
b40508ca5d
|
Merge patch series "timekeeping/fs: multigrain timestamp redux"
Jeff Layton <jlayton@kernel.org> says: The VFS has always used coarse-grained timestamps when updating the ctime and mtime after a change. This has the benefit of allowing filesystems to optimize away a lot metadata updates, down to around 1 per jiffy, even when a file is under heavy writes. Unfortunately, this has always been an issue when we're exporting via NFSv3, which relies on timestamps to validate caches. A lot of changes can happen in a jiffy, so timestamps aren't sufficient to help the client decide when to invalidate the cache. Even with NFSv4, a lot of exported filesystems don't properly support a change attribute and are subject to the same problems with timestamp granularity. Other applications have similar issues with timestamps (e.g backup applications). If we were to always use fine-grained timestamps, that would improve the situation, but that becomes rather expensive, as the underlying filesystem would have to log a lot more metadata updates. What we need is a way to only use fine-grained timestamps when they are being actively queried. Use the (unused) top bit in inode->i_ctime_nsec as a flag that indicates whether the current timestamps have been queried via stat() or the like. When it's set, we allow the kernel to use a fine-grained timestamp iff it's necessary to make the ctime show a different value. This solves the problem of being able to distinguish the timestamp between updates, but introduces a new problem: it's now possible for a file being changed to get a fine-grained timestamp. A file that is altered just a bit later can then get a coarse-grained one that appears older than the earlier fine-grained time. This violates timestamp ordering guarantees. To remedy this, keep a global monotonic atomic64_t value that acts as a timestamp floor. When we go to stamp a file, we first get the latter of the current floor value and the current coarse-grained time. If the inode ctime hasn't been queried then we just attempt to stamp it with that value. If it has been queried, then first see whether the current coarse time is later than the existing ctime. If it is, then we accept that value. If it isn't, then we get a fine-grained time and try to swap that into the global floor. Whether that succeeds or fails, we take the resulting floor time, convert it to realtime and try to swap that into the ctime. We take the result of the ctime swap whether it succeeds or fails, since either is just as valid. Filesystems can opt into this by setting the FS_MGTIME fstype flag. Others should be unaffected (other than being subject to the same floor value as multigrain filesystems). * patches from https://lore.kernel.org/r/20241002-mgtime-v10-0-d1c4717f5284@kernel.org: tmpfs: add support for multigrain timestamps btrfs: convert to multigrain timestamps ext4: switch to multigrain timestamps xfs: switch to multigrain timestamps Documentation: add a new file documenting multigrain timestamps fs: add percpu counters for significant multigrain timestamp events fs: tracepoints around multigrain timestamp events fs: handle delegated timestamps in setattr_copy_mgtime fs: have setattr_copy handle multigrain timestamps appropriately fs: add infrastructure for multigrain timestamps Link: https://lore.kernel.org/r/20241002-mgtime-v10-0-d1c4717f5284@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Jeff Layton
|
c86e3c4718
|
fs: tracepoints around multigrain timestamp events
Add some tracepoints around various multigrain timestamp events. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20241002-mgtime-v10-6-d1c4717f5284@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Mathieu Desnoyers
|
0850e1bc88 |
tracing/bpf: Add might_fault check to syscall probes
Add a might_fault() check to validate that the bpf sys_enter/sys_exit probe callbacks are indeed called from a context where page faults can be handled. Cc: Michael Jeanson <mjeanson@efficios.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: bpf@vger.kernel.org Cc: Joel Fernandes <joel@joelfernandes.org> Link: https://lore.kernel.org/20241009010718.2050182-9-mathieu.desnoyers@efficios.com Acked-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Andrii Nakryiko <andrii@kernel.org> # BPF parts Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Mathieu Desnoyers
|
cdb537ac41 |
tracing/perf: Add might_fault check to syscall probes
Add a might_fault() check to validate that the perf sys_enter/sys_exit probe callbacks are indeed called from a context where page faults can be handled. Cc: Michael Jeanson <mjeanson@efficios.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: bpf@vger.kernel.org Cc: Joel Fernandes <joel@joelfernandes.org> Link: https://lore.kernel.org/20241009010718.2050182-8-mathieu.desnoyers@efficios.com Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Mathieu Desnoyers
|
a3204c740a |
tracing/ftrace: Add might_fault check to syscall probes
Add a might_fault() check to validate that the ftrace sys_enter/sys_exit probe callbacks are indeed called from a context where page faults can be handled. Cc: Michael Jeanson <mjeanson@efficios.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: bpf@vger.kernel.org Cc: Joel Fernandes <joel@joelfernandes.org> Link: https://lore.kernel.org/20241009010718.2050182-7-mathieu.desnoyers@efficios.com Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Mathieu Desnoyers
|
4aadde89d8 |
tracing/bpf: disable preemption in syscall probe
In preparation for allowing system call enter/exit instrumentation to handle page faults, make sure that bpf can handle this change by explicitly disabling preemption within the bpf system call tracepoint probes to respect the current expectations within bpf tracing code. This change does not yet allow bpf to take page faults per se within its probe, but allows its existing probes to adapt to the upcoming change. Cc: Michael Jeanson <mjeanson@efficios.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: bpf@vger.kernel.org Cc: Joel Fernandes <joel@joelfernandes.org> Link: https://lore.kernel.org/20241009010718.2050182-5-mathieu.desnoyers@efficios.com Acked-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Andrii Nakryiko <andrii@kernel.org> # BPF parts Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Mathieu Desnoyers
|
65e7462a16 |
tracing/perf: disable preemption in syscall probe
In preparation for allowing system call enter/exit instrumentation to handle page faults, make sure that perf can handle this change by explicitly disabling preemption within the perf system call tracepoint probes to respect the current expectations within perf ring buffer code. This change does not yet allow perf to take page faults per se within its probe, but allows its existing probes to adapt to the upcoming change. Cc: Michael Jeanson <mjeanson@efficios.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: bpf@vger.kernel.org Cc: Joel Fernandes <joel@joelfernandes.org> Link: https://lore.kernel.org/20241009010718.2050182-4-mathieu.desnoyers@efficios.com Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Mathieu Desnoyers
|
13d750c2c0 |
tracing/ftrace: disable preemption in syscall probe
In preparation for allowing system call enter/exit instrumentation to handle page faults, make sure that ftrace can handle this change by explicitly disabling preemption within the ftrace system call tracepoint probes to respect the current expectations within ftrace ring buffer code. This change does not yet allow ftrace to take page faults per se within its probe, but allows its existing probes to adapt to the upcoming change. Cc: Michael Jeanson <mjeanson@efficios.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: bpf@vger.kernel.org Cc: Joel Fernandes <joel@joelfernandes.org> Link: https://lore.kernel.org/20241009010718.2050182-3-mathieu.desnoyers@efficios.com Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Mathieu Desnoyers
|
0e6caab8db |
tracing: Declare system call tracepoints with TRACE_EVENT_SYSCALL
In preparation for allowing system call tracepoints to handle page faults, introduce TRACE_EVENT_SYSCALL to declare the sys_enter/sys_exit tracepoints. Move the common code between __DECLARE_TRACE and __DECLARE_TRACE_SYSCALL into __DECLARE_TRACE_COMMON. This change is not meant to alter the generated code, and only prepares the following modifications. Cc: Michael Jeanson <mjeanson@efficios.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: bpf@vger.kernel.org Cc: Joel Fernandes <joel@joelfernandes.org> Link: https://lore.kernel.org/20241009010718.2050182-2-mathieu.desnoyers@efficios.com Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
48bcda6848 |
tracing: Remove definition of trace_*_rcuidle()
The trace_*_rcuidle() variant of a tracepoint was to handle places where a tracepoint was located but RCU was not "watching". All those locations have been removed, and RCU should be watching where all tracepoints are located. We can now remove the trace_*_rcuidle() variant. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Joel Fernandes <joel@joelfernandes.org> Link: https://lore.kernel.org/20241003181629.36209057@gandalf.local.home Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
David Howells
|
796a404964
|
netfs: In readahead, put the folio refs as soon extracted
netfslib currently defers dropping the ref on the folios it obtains during
readahead to after it has started I/O on the basis that we can do it whilst
we wait for the I/O to complete, but this runs the risk of the I/O
collection racing with this in future.
Furthermore, Matthew Wilcox strongly suggests that the refs should be
dropped immediately, as readahead_folio() does (netfslib is using
__readahead_batch() which doesn't drop the refs).
Fixes:
|
||
|
Christian Brauner
|
9b8e8091c8
|
Merge patch series "Random netfs folio fixes"
Matthew Wilcox (Oracle) <willy@infradead.org> says: A few minor fixes; nothing earth-shattering. Matthew Wilcox (Oracle) (3): netfs: Remove call to folio_index() netfs: Fix a few minor bugs in netfs_page_mkwrite() netfs: Remove unnecessary references to pages Link: https://lore.kernel.org/r/20241005182307.3190401-1-willy@infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Matthew Wilcox (Oracle)
|
fcd4904e2f
|
netfs: Remove call to folio_index()
Calling folio_index() is pointless overhead; directly dereferencing folio->index is fine. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20241005182307.3190401-2-willy@infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Linus Torvalds
|
79eb2c07af |
for-6.12-rc1-tag
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmb/9agACgkQxWXV+ddt WDtKFA/5AW88osk/1k/NVhOvOa0xPr5XyDLq1n8Gaxfy8uHlHAc8wdsvJzCDMS0M qUOD/tOPhRI0HGXPiKD767erwbyXiZAcCTkSd8x5jlXy1hVjUHQSKO//JxD0vtAZ jOscoUA1wJJutopCXcppnoUUFE2753edEg0w2EtUXMpfqivqOmMCR+1ZtKkfaNJo oRuZCq3Oi8hu7Wsvmh4Etq/9MvGM+xovXAMAji6Op8nsP1jJlzWztpEUogLOQH2S IhDFFxP9shBV9JjV+HSyXcAYr8VArH6HtYjapR9oajCH0pvSjLYQQPq/qQ0//8Hb SHr4YP6RBbpEIvvaQeA7vwsckBHNBOrSAbEgRQ2+zdmiwha6SRIEVyXYh5LUwcYT WnVozbk7ZX9rD1jOVhvgouFG6vUz8A6/qt3BD028bVcyMvBXW4gsEduCMVlFGmlN D6+hNY6J08j4HUEGnPk7fAYi/lk5OEK1p5yarUgsOQ3GqWWS0ywkrfbmbWwyC+Ff AxggFTl9YodU5RMs7EU2GeHkLU6LnXgevk6FFm0JzsLtT/BbEP7pj6tOot4Msl1e 2ovqFiSbuPNg5Wr70ZBRO9LDIAYtTZy1UrVR/YCSLzm+wZsXMelDIHMQfE7+Yodp O5Cud23AanRTwjErvNl3X4rhut8rrI1FsR89gDyKK1EPG+mwofo= =yslr -----END PGP SIGNATURE----- Merge tag 'for-6.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - in incremental send, fix invalid clone operation for file that got its size decreased - fix __counted_by() annotation of send path cache entries, we do not store the terminating NUL - fix a longstanding bug in relocation (and quite hard to hit by chance), drop back reference cache that can get out of sync after transaction commit - wait for fixup worker kthread before finishing umount - add missing raid-stripe-tree extent for NOCOW files, zoned mode cannot have NOCOW files but RST is meant to be a standalone feature - handle transaction start error during relocation, avoid potential NULL pointer dereference of relocation control structure (reported by syzbot) - disable module-wide rate limiting of debug level messages - minor fix to tracepoint definition (reported by checkpatch.pl) * tag 'for-6.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: disable rate limiting when debug enabled btrfs: wait for fixup workers before stopping cleaner kthread during umount btrfs: fix a NULL pointer dereference when failed to start a new trasacntion btrfs: send: fix invalid clone operation for file that got its size decreased btrfs: tracepoints: end assignment with semicolon at btrfs_qgroup_extent event class btrfs: drop the backref cache during relocation if we commit btrfs: also add stripe entries for NOCOW writes btrfs: send: fix buffer overflow detection when copying path to cache entry |
||
|
Christian Brauner
|
2b2b1a20db
|
Merge patch series "Introduce tracepoint for hugetlbfs"
Hongbo Li <lihongbo22@huawei.com> says:
Add some basic tracepoints for debugging hugetlbfs: {alloc, free,
evict}_inode, setattr and fallocate.
* patches from https://lore.kernel.org/r/20240829064110.67884-1-lihongbo22@huawei.com:
hugetlbfs: use tracepoints in hugetlbfs functions.
hugetlbfs: support tracepoint
Link: https://lore.kernel.org/r/20240829064110.67884-1-lihongbo22@huawei.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
Filipe Manana
|
50c6f6e680 |
btrfs: tracepoints: end assignment with semicolon at btrfs_qgroup_extent event class
While running checkpatch.pl against a patch that modifies the btrfs_qgroup_extent event class, it complained about using a comma instead of a semicolon: $ ./scripts/checkpatch.pl qgroups/0003-btrfs-qgroups-remove-bytenr-field-from-struct-btrfs_.patch WARNING: Possible comma where semicolon could be used #215: FILE: include/trace/events/btrfs.h:1720: + __entry->bytenr = bytenr, __entry->num_bytes = rec->num_bytes; total: 0 errors, 1 warnings, 184 lines checked So replace the comma with a semicolon to silence checkpatch and possibly other tools. It also makes the code consistent with the rest. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Linus Torvalds
|
a5f24c7955 |
vfs-6.12-rc2.fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZvqoUgAKCRCRxhvAZXjc
oveLAQC952BB+giATJvX5lPz400g+MoDVlWiPdqAVbF0PCGRRwEA+/7TedOfOkQx
Df3iAzDXVbX/WvWYdZ/DyLp/r44WHAw=
=tGkE
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"afs:
- Fix setting of the server responding flag
- Remove unused struct afs_address_list and afs_put_address_list()
function
- Fix infinite loop because of unresponsive servers
- Ensure that afs_retry_request() function is correctly added to the
afs_req_ops netfs operations table
netfs:
- Fix netfs_folio tracepoint handling to handle NULL mappings
- Add a missing folio_queue API documentation
- Ensure that netfs_write_folio() correctly advances the iterator via
iov_iter_advance()
- Fix a dentry leak during concurrent cull and cookie lookup
operations in cachefiles
pidfs:
- Correctly handle accessing another task's pid namespace"
* tag 'vfs-6.12-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix the netfs_folio tracepoint to handle NULL mapping
netfs: Add folio_queue API documentation
netfs: Advance iterator correctly rather than jumping it
afs: Fix the setting of the server responding flag
afs: Remove unused struct and function prototype
afs: Fix possible infinite loop with unresponsive servers
pidfs: check for valid pid namespace
afs: Fix missing wire-up of afs_retry_request()
cachefiles: fix dentry leak in cachefiles_open_file()
|
||
|
David Howells
|
f801850bc2
|
netfs: Fix the netfs_folio tracepoint to handle NULL mapping
Fix the netfs_folio tracepoint to handle folios that have a NULL mapping
pointer. In such a case, just substitute a zero inode number.
Fixes:
|
||
|
Linus Torvalds
|
b81b78dacc |
dma-mapping fixes for Linux 6.12
- handle chained SGLs in the new tracing code (Christoph Hellwig) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmb47voLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYMqAw//TCBIiBNBwjWipVBXmvizu0MaB+PU8ZOjXZoeEdlN WeGSPvuW2lWJxjBblPcFA3MFO9pztO9E94dayu5/jV5QP4G+EzyCJDoZOQu8iHYX YzaIgkt0W+vKEFmvAqfrHuPHHO0mZ00qaBmj/r+cayWqBBvWPLbj7kU7+sFVG4it lP2QGGYGV6Ryvkwcft+Got4oIKmyuTsS4i4Cq17WNuhAxDMZftnVPIuUJ9Q00xza zDSwKgAOoPqaf3r026MqahpEECAQP0S7uqH10I+MJe7AbREbO7GSHcx4YWDhmyLd KFJ+Wv67H8voCsvdH76zANVLE6S5YMyAwMAJSRQxuVSjqrIM0vyyQ4jeRZCHibva NvYnv/xRRF+BKyNthNAz1m69K3y8UV5gvP/otezHInGd5/b527UoLXdFl+wQvdJm aJwCYSFgQbAsoAh4kWCUmYXGwc1h6aQQ3pcHD118yf9Glzjl4vwHOyF12GigfCdQ cbNo+ceacO3rg/H85zMl8OCMtnPwAlNAU+16MY0JwefKKs6rmRyQeTreQKjjdhTm /0FVKq1PXJeOdMBqSnrN/tJBIEJxtQlUqE7mx7B2OnczvNpaO4THGlo181nnzPPd HTb9fXzBJeSSbDGWF8W6MZIleDj+s4V5Z6Qqi0cW9F7Yn4dCw9ghBBkDZtcm+hkb +q0= =zjTS -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: - handle chained SGLs in the new tracing code (Christoph Hellwig) * tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: fix DMA API tracing for chained scatterlists |
||
|
Uwe Kleine-König
|
1afd01db1a |
pwm: Add tracing for waveform callbacks
This adds trace events for the recently introduced waveform callbacks. With the introduction of some helper macros consistency among the different events is ensured. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/1d71879b0de3bf01459c7a9d0f040d43eb5ace56.1726819463.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org> |
||
|
Christoph Hellwig
|
bfc4a245a7 |
dma-mapping: fix DMA API tracing for chained scatterlists
scatterlist allocations can be chained, and thus all iterations need to
use the chain-aware iterators. Switch the newly added tracing to use the
proper iterators so that they work with chained scatterlists.
Fixes:
|
||
|
Linus Torvalds
|
79952bdcbc |
f2fs-6.12-rc1
In this series, the main changes include 1) converting major IO paths to use
folio, and 2) adding various knobs to control GC more flexibly for Zoned
devices. In addition, there are several patches to address corner cases of
atomic file operations and better support for file pinning on zoned device.
Enhancement:
- add knobs to tune foreground/background GCs for Zoned devices
- convert IO paths to use folio
- reduce expensive checkpoint trigger frequency
- allow F2FS_IPU_NOCACHE for pinned file
- forcibly migrate to secure space for zoned device file pinning
- get rid of buffer_head use
- add write priority option based on zone UFS
- get rid of online repair on corrupted directory
Bug fix:
- fix to don't panic system for no free segment fault injection
- fix to don't set SB_RDONLY in f2fs_handle_critical_error()
- avoid unused block when dio write in LFS mode
- compress: don't redirty sparse cluster during {,de}compress
- check discard support for conventional zones
- atomic: prevent atomic file from being dirtied before commit
- atomic: fix to check atomic_file in f2fs ioctl interfaces
- atomic: fix to forbid dio in atomic_file
- atomic: fix to truncate pagecache before on-disk metadata truncation
- atomic: create COW inode from parent dentry
- atomic: fix to avoid racing w/ GC
- atomic: require FMODE_WRITE for atomic write ioctls
- fix to wait page writeback before setting gcing flag
- fix to avoid racing in between read and OPU dio write, dio completion
- fix several potential integer overflows in file offsets and dir_block_index
- fix to avoid use-after-free in f2fs_stop_gc_thread()
As usual, there are several code clean-ups and refactorings.
-----BEGIN PGP SIGNATURE-----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=EKzY
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"The main changes include converting major IO paths to use folio, and
adding various knobs to control GC more flexibly for Zoned devices.
In addition, there are several patches to address corner cases of
atomic file operations and better support for file pinning on zoned
device.
Enhancement:
- add knobs to tune foreground/background GCs for Zoned devices
- convert IO paths to use folio
- reduce expensive checkpoint trigger frequency
- allow F2FS_IPU_NOCACHE for pinned file
- forcibly migrate to secure space for zoned device file pinning
- get rid of buffer_head use
- add write priority option based on zone UFS
- get rid of online repair on corrupted directory
Bug fixes:
- fix to don't panic system for no free segment fault injection
- fix to don't set SB_RDONLY in f2fs_handle_critical_error()
- avoid unused block when dio write in LFS mode
- compress: don't redirty sparse cluster during {,de}compress
- check discard support for conventional zones
- atomic: prevent atomic file from being dirtied before commit
- atomic: fix to check atomic_file in f2fs ioctl interfaces
- atomic: fix to forbid dio in atomic_file
- atomic: fix to truncate pagecache before on-disk metadata truncation
- atomic: create COW inode from parent dentry
- atomic: fix to avoid racing w/ GC
- atomic: require FMODE_WRITE for atomic write ioctls
- fix to wait page writeback before setting gcing flag
- fix to avoid racing in between read and OPU dio write, dio completion
- fix several potential integer overflows in file offsets and dir_block_index
- fix to avoid use-after-free in f2fs_stop_gc_thread()
As usual, there are several code clean-ups and refactorings"
* tag 'f2fs-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (60 commits)
f2fs: allow F2FS_IPU_NOCACHE for pinned file
f2fs: forcibly migrate to secure space for zoned device file pinning
f2fs: remove unused parameters
f2fs: fix to don't panic system for no free segment fault injection
f2fs: fix to don't set SB_RDONLY in f2fs_handle_critical_error()
f2fs: add valid block ratio not to do excessive GC for one time GC
f2fs: create gc_no_zoned_gc_percent and gc_boost_zoned_gc_percent
f2fs: do FG_GC when GC boosting is required for zoned devices
f2fs: increase BG GC migration window granularity when boosted for zoned devices
f2fs: add reserved_segments sysfs node
f2fs: introduce migration_window_granularity
f2fs: make BG GC more aggressive for zoned devices
f2fs: avoid unused block when dio write in LFS mode
f2fs: fix to check atomic_file in f2fs ioctl interfaces
f2fs: get rid of online repaire on corrupted directory
f2fs: prevent atomic file from being dirtied before commit
f2fs: get rid of page->index
f2fs: convert read_node_page() to use folio
f2fs: convert __write_node_page() to use folio
f2fs: convert f2fs_write_data_page() to use folio
...
|
||
|
Linus Torvalds
|
d7dfb07d4d |
firewire updates for v6.12
The batch of changes includes the followwing:
- Replacing tasklet with usual workqueue for isochronous context
- Replacing IDR with XArray
- Utilizing guard macro where possible
- Printing deprecation warning when enabling debug parameter of
firewire-ohci module
Additionally, it includes a single patch for sound subsystem which the
subsystem maintainer acked:
- Switching to nonatomic PCM operation
In FireWire subsystem, tasklet has been used as the bottom half of 1394
OHCi hardIRQ so long. In the recent kernel updates, BH workqueue has
been available, and some developers have proposed replacing tasklet with
BH workqueue. While it is fortunate that developers are still considering
the legacy subsystem, a simple replacement is not necessarily suitable.
As a first step towards dropping tasklet, I've investigated the
feasibility for 1394 OHCI isochronous context, and concluded that usual
workqueue is available. In the context, the batch of packets is processed
in the specific queue, thus the timing jitter caused by task scheduling is
not so critical. Additionally, DMA transmission can be scheduled
per-packet basis, therefore the context can be sleep between the operation
of transmissions. Furthermore, in-kernel protocol implementation involves
some CPU-bound tasks, which can sometimes consumes CPU time so long. These
characteristics suggest that usual workqueue is suitable, through BH
workqueues are not.
The replacement with usual workqueue allows unit drivers to process the
content of packets in non-atomic context. It brings some reliefs to some
drivers in sound subsystem that spin-lock is not mandatory anymore during
isochronous packet processing.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZu41yQAKCRCsLtaWM8Lw
E4Y1AP43vZatH202NNMnbkLSW9axmHe6VHWEwDSsJT80vTbBNAD/WYV62EoQzlk1
1lzdts11SSqYPhj6tJDuRgqULlNAows=
=7VMx
-----END PGP SIGNATURE-----
Merge tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"In the FireWire subsystem, tasklets have been used as the bottom half
of 1394 OHCi hardIRQ. In recent kernel updates, BH workqueues have
become available, and some developers have proposed replacing the
tasklet with a BH workqueue.
As a first step towards dropping tasklet use, the 1394 OHCI
isochronous context can use regular workqueues. In this context, the
batch of packets is processed in the specific queue, thus the timing
jitter caused by task scheduling is not so critical.
Additionally, DMA transmission can be scheduled per-packet basis,
therefore the context can be sleep between the operation of
transmissions. Furthermore, in-kernel protocol implementation involves
some CPU-bound tasks, which can sometimes consumes CPU time so long.
These characteristics suggest that normal workqueues are suitable,
through BH workqueues are not.
The replacement with a workqueue allows unit drivers to process the
content of packets in non-atomic context. It brings some reliefs to
some drivers in sound subsystem that spin-lock is not mandatory
anymore during isochronous packet processing.
Summary:
- Replace tasklet with workqueue for isochronous context
- Replace IDR with XArray
- Utilize guard macro where possible
- Print deprecation warning when enabling debug parameter of
firewire-ohci module
- Switch to nonatomic PCM operation"
* tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (55 commits)
firewire: core: rename cause flag of tracepoints event
firewire: core: update documentation of kernel APIs for flushing completions
firewire: core: add helper function to retire descriptors
Revert "firewire: core: move workqueue handler from 1394 OHCI driver to core function"
Revert "firewire: core: use mutex to coordinate concurrent calls to flush completions"
firewire: core: use mutex to coordinate concurrent calls to flush completions
firewire: core: move workqueue handler from 1394 OHCI driver to core function
firewire: core: fulfill documentation of fw_iso_context_flush_completions()
firewire: core: expose kernel API to schedule work item to process isochronous context
firewire: core: use WARN_ON_ONCE() to avoid superfluous dumps
ALSA: firewire: use nonatomic PCM operation
firewire: core: non-atomic memory allocation for isochronous event to user client
firewire: ohci: operate IT/IR events in sleepable work process instead of tasklet softIRQ
firewire: core: add local API to queue work item to workqueue specific to isochronous contexts
firewire: core: allocate workqueue to handle isochronous contexts in card
firewire: ohci: obsolete direct usage of printk_ratelimit()
firewire: ohci: deprecate debug parameter
firewire: core: update fw_device outside of device_find_child()
firewire: ohci: fix error path to detect initiated reset in TI TSB41BA3D phy
firewire: core/ohci: minor refactoring for computation of configuration ROM size
...
|
||
|
Linus Torvalds
|
18ba603446 |
NFSD 6.12 Release Notes
Notable features of this release include:
- Pre-requisites for automatically determining the RPC server thread
count
- Clean-up and preparation for supporting LOCALIO, which will be
merged via the NFS client tree
- Enhancements and fixes to NFSv4.2 COPY offload
- A new Python-based tool for generating kernel SunRPC XDR encoding
and decoding functions, added as an aid for prototyping features
in protocols based on the Linux kernel's SunRPC implementation.
As always I am grateful to the NFSD contributors, reviewers,
testers, and bug reporters who participated during this cycle.
-----BEGIN PGP SIGNATURE-----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=Ybsc
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Notable features of this release include:
- Pre-requisites for automatically determining the RPC server thread
count
- Clean-up and preparation for supporting LOCALIO, which will be
merged via the NFS client tree
- Enhancements and fixes to NFSv4.2 COPY offload
- A new Python-based tool for generating kernel SunRPC XDR encoding
and decoding functions, added as an aid for prototyping features in
protocols based on the Linux kernel's SunRPC implementation
As always I am grateful to the NFSD contributors, reviewers, testers,
and bug reporters who participated during this cycle"
* tag 'nfsd-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (57 commits)
xdrgen: Prevent reordering of encoder and decoder functions
xdrgen: typedefs should use the built-in string and opaque functions
xdrgen: Fix return code checking in built-in XDR decoders
tools: Add xdrgen
nfsd: fix delegation_blocked() to block correctly for at least 30 seconds
nfsd: fix initial getattr on write delegation
nfsd: untangle code in nfsd4_deleg_getattr_conflict()
nfsd: enforce upper limit for namelen in __cld_pipe_inprogress_downcall()
nfsd: return -EINVAL when namelen is 0
NFSD: Wrap async copy operations with trace points
NFSD: Clean up extra whitespace in trace_nfsd_copy_done
NFSD: Record the callback stateid in copy tracepoints
NFSD: Display copy stateids with conventional print formatting
NFSD: Limit the number of concurrent async COPY operations
NFSD: Async COPY result needs to return a write verifier
nfsd: avoid races with wake_up_var()
nfsd: use clear_and_wake_up_bit()
sunrpc: xprtrdma: Use ERR_CAST() to return
NFSD: Annotate struct pnfs_block_deviceaddr with __counted_by()
nfsd: call cache_put if xdr_reserve_space returns NULL
...
|
||
|
Linus Torvalds
|
88264981f2 |
sched_ext: Initial pull request for v6.12
This is the initial pull request of sched_ext. The v7 patchset (https://lkml.kernel.org/r/20240618212056.2833381-1-tj@kernel.org) is applied on top of tip/sched/core + bpf/master as of Jun 18th. tip/sched/core 793a62823d1c ("sched/core: Drop spinlocks on contention iff kernel is preempti ble") bpf/master |
||
|
Linus Torvalds
|
617a814f14 |
ALong with the usual shower of singleton patches, notable patch series in
this pull request are:
"Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
"Some cleanups for shmem" from Baolin Wang. No functional changes - mode
code reuse, better function naming, logic simplifications.
"mm: some small page fault cleanups" from Josef Bacik. No functional
changes - code cleanups only.
"Various memory tiering fixes" from Zi Yan. A small fix and a little
cleanup.
"mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
"Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This
is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at all
used 16k. Useful for some system tuning things, but partivularly useful
for "the dynamic kernel stack project".
"kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov.
Teaches kmemleak to detect leaksage of percpu memory.
"mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
"mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David
Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work
correctly by design rather than by accident.
"mm: remove arch_make_page_accessible()" from David Hildenbrand. Some
folio conversions which make arch_make_page_accessible() unneeded.
"mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel.
Cleans up and fixes our handling of the resetting of the cgroup/process
peak-memory-use detector.
"Make core VMA operations internal and testable" from Lorenzo Stoakes.
Rationalizaion and encapsulation of the VMA manipulation APIs. With a
view to better enable testing of the VMA functions, even from a
userspace-only harness.
"mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in
the zswap global shrinker, resulting in improved performance.
"mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in
some missing info in /proc/zoneinfo.
"mm: replace follow_page() by folio_walk" from David Hildenbrand. Code
cleanups and rationalizations (conversion to folio_walk()) resulting in
the removal of follow_page().
"improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some
tuning to improve zswap's dynamic shrinker. Significant reductions in
swapin and improvements in performance are shown.
"mm: Fix several issues with unaccepted memory" from Kirill Shutemov.
Improvements to the new unaccepted memory feature,
"mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX
PUDs. This was missing, although nobody seems to have notied yet.
"Introduce a store type enum for the Maple tree" from Sidhartha Kumar.
Cleanups and modest performance improvements for the maple tree library
code.
"memcg: further decouple v1 code from v2" from Shakeel Butt. Move more
cgroup v1 remnants away from the v2 memcg code.
"memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds
various warnings telling users that memcg v1 features are deprecated.
"mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li.
Greatly improves the success rate of the mTHP swap allocation.
"mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate
per-arch implementations of numa_memblk code into generic code.
"mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
"support large folio swap-out and swap-in for shmem" from Baolin Wang.
With this series we no longer split shmem large folios into simgle-page
folios when swapping out shmem.
"mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance
improvements and code reductions for gigantic folios.
"support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
"mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
"Increase the number of bits available in page_type" from Matthew Wilcox.
Increases the number of bits available in page_type!
"Simplify the page flags a little" from Matthew Wilcox. Many legacy page
flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
"mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An
optimization which permits us to avoid writing/reading zero-filled zswap
pages to backing store.
"Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window
which occurs when a MAP_FIXED operqtion is occurring during an unrelated
vma tree walk.
"mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the
vma_merge() functionality, making ot cleaner, more testable and better
tested.
"misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor
fixups of DAMON selftests and kunit tests.
"mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code
cleanups and folio conversions.
"Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups
for shmem controls and stats.
"mm: count the number of anonymous THPs per size" from Barry Song. Expose
additional anon THP stats to userspace for improved tuning.
"mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio
conversions and removal of now-unused page-based APIs.
"replace per-quota region priorities histogram buffer with per-context
one" from SeongJae Park. DAMON histogram rationalization.
"Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae
Park. DAMON documentation updates.
"mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve
related doc and warn" from Jason Wang: fixes usage of page allocator
__GFP_NOFAIL and GFP_ATOMIC flags.
"mm: split underused THPs" from Yu Zhao. Improve THP=always policy - this
was overprovisioning THPs in sparsely accessed memory areas.
"zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add
support for zram run-time compression algorithm tuning.
"mm: Care about shadow stack guard gap when getting an unmapped area" from
Mark Brown. Fix up the various arch_get_unmapped_area() implementations
to better respect guard areas.
"Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of
mem_cgroup_iter() and various code cleanups.
"mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
"resource: Fix region_intersects() vs add_memory_driver_managed()" from
Huang Ying. Fix a bug in region_intersects() for systems with CXL memory.
"mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a
couple more code paths to correctly recover from the encountering of
poisoned memry.
"mm: enable large folios swap-in support" from Barry Song. Support the
swapin of mTHP memory into appropriately-sized folios, rather than into
single-page folios.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu1BBwAKCRDdBJ7gKXxA
jlWNAQDYlqQLun7bgsAN4sSvi27VUuWv1q70jlMXTfmjJAvQqwD/fBFVR6IOOiw7
AkDbKWP2k0hWPiNJBGwoqxdHHx09Xgo=
=s0T+
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
||
|
Chuck Lever
|
c4de97f7c4 |
svcrdma: Handle device removal outside of the CM event handler
Synchronously wait for all disconnects to complete to ensure the transports have divested all hardware resources before the underlying RDMA device can safely be removed. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Linus Torvalds
|
a1d1eb2f57 |
SCSI misc on 20240919
Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc, mpi3mr). There are no user visible core changes and a whole series of minor updates and fixes. The largest core change is probably the simplification of the workqueue allocation path. Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZuvd5yYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishV7dAQC+TSlv BeNm8W4yAFCXLCwnJh8rT6ZzuBsjsIHH1DPP3wD+IXuIOFf5gVRJGpCNJc/dI082 /ehSrIdeJxwaNoOOt+Y= =SXZD -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc, mpi3mr). There are no user visible core changes and a whole series of minor updates and fixes. The largest core change is probably the simplification of the workqueue allocation path" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (86 commits) scsi: smartpqi: update driver version to 2.1.30-031 scsi: smartpqi: fix volume size updates scsi: smartpqi: fix rare system hang during LUN reset scsi: smartpqi: add new controller PCI IDs scsi: smartpqi: add counter for parity write stream requests scsi: smartpqi: correct stream detection scsi: smartpqi: Add fw log to kdump scsi: bnx2fc: Remove some unused fields in struct bnx2fc_rport scsi: qla2xxx: Remove the unused 'del_list_entry' field in struct fc_port scsi: ufs: core: Remove ufshcd_urgent_bkops() scsi: core: Remove obsoleted declaration for scsi_driverbyte_string() scsi: bnx2i: Remove unused declarations scsi: core: Simplify an alloc_workqueue() invocation scsi: ufs: Simplify alloc*_workqueue() invocation scsi: stex: Simplify an alloc_ordered_workqueue() invocation scsi: scsi_transport_fc: Simplify alloc_workqueue() invocations scsi: snic: Simplify alloc_workqueue() invocations scsi: qedi: Simplify an alloc_workqueue() invocation scsi: qedf: Simplify alloc_workqueue() invocations scsi: myrs: Simplify an alloc_ordered_workqueue() invocation ... |
||
|
Linus Torvalds
|
726e2d0cf2 |
dma-mapping updates for linux 6.12
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed,
Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----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=DZVc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
|
||
|
Linus Torvalds
|
84bbfe6b64 |
platform-drivers-x86 for v6.12-1
Highlights: - asus-wmi: Add support for vivobook fan profiles - dell-laptop: Add knobs to change battery charge settings - lg-laptop: Add operation region support - intel-uncore-freq: Add support for efficiency latency control - intel/ifs: Add SBAF test support - intel/pmc: Ignore all LTRs during suspend - platform/surface: Support for arm64 based Surface devices - wmi: Pass event data directly to legacy notify handlers - x86/platform/geode: switch GPIO buttons and LEDs to software properties - bunch of small cleanups, fixes, hw-id additions, etc. The following is an automated git shortlog grouped by driver: Documentation: - admin-guide: pm: Add efficiency vs. latency tradeoff to uncore documentation ISST: - Simplify isst_misc_reg() and isst_misc_unreg() MAINTAINERS: - adjust file entry in INTEL MID PLATFORM - Add Intel MID section Merge tag 'hwmon-for-v6.11-rc7' into review-hans: - Merge tag 'hwmon-for-v6.11-rc7' into review-hans Merge tag 'platform-drivers-x86-v6.11-3' into review-hans: - Merge tag 'platform-drivers-x86-v6.11-3' into review-hans acer-wmi: - Use backlight power constants asus-laptop: - Use backlight power constants asus-nb-wmi: - Use backlight power constants asus-wmi: - don't fail if platform_profile already registered - add debug print in more key places - Use backlight power constants - add support for vivobook fan profiles dell-laptop: - remove duplicate code w/ battery function - Add knobs to change battery charge settings dt-bindings: - platform: Add Surface System Aggregator Module - serial: Allow embedded-controller as child node eeepc-laptop: - Use backlight power constants eeepc-wmi: - Use backlight power constants fujitsu-laptop: - Use backlight power constants hid-asus: - use hid for brightness control on keyboard ideapad-laptop: - Make the scope_guard() clear of its scope - move ACPI helpers from header to source file - Use backlight power constants int3472: - Use str_high_low() - Use GPIO_LOOKUP() macro - make common part a separate module intel-hid: - Use string_choices API instead of ternary operator intel/pmc: - Ignore all LTRs during suspend - Remove unused param idx from pmc_for_each_mode() intel_scu_ipc: - Move intel_scu_ipc.h out of arch/x86/include/asm intel_scu_wdt: - Move intel_scu_wdt.h to x86 subfolder lenovo-ymc: - Ignore the 0x0 state lg-laptop: - Add operation region support oaktrail: - Use backlight power constants panasonic-laptop: - Add support for programmable buttons platform/mellanox: - mlxbf-pmc: fix lockdep warning platform/olpc: - Remove redundant null pointer checks in olpc_ec_setup_debugfs() platform/surface: - Add OF support platform/x86/amd: - pmf: Add quirk for TUF Gaming A14 platform/x86/amd/pmf: - Update SMU metrics table for 1AH family series - Relocate CPU ID macros to the PMF header - Add support for notifying Smart PC Solution updates platform/x86/intel-uncore-freq: - Add efficiency latency control to sysfs interface - Add support for efficiency latency control - Do not present separate package-die domain platform/x86/intel/ifs: - Fix SBAF title underline length - Add SBAF test support - Add SBAF test image loading support - Refactor MSR usage in IFS test code platform/x86/intel/pmc: - Show live substate requirements platform/x86/intel/pmt: - Use PMT callbacks platform/x86/intel/vsec: - Add PMT read callbacks platform/x86/intel/vsec.h: - Move to include/linux samsung-laptop: - Use backlight power constants serial-multi-instantiate: - Don't require both I2C and SPI thinkpad_acpi: - Fix uninitialized symbol 's' warning - Add Thinkpad Edge E531 fan support touchscreen_dmi: - add nanote-next quirk trace: - platform/x86/intel/ifs: Add SBAF trace support wmi: - Call both legacy and WMI driver notify handlers - Merge get_event_data() with wmi_get_notify_data() - Remove wmi_get_event_data() - Pass event data directly to legacy notify handlers x86-android-tablets: - Adjust Xiaomi Pad 2 bottom bezel touch buttons LED - Fix spelling in the comments x86/platform/geode: - switch GPIO buttons and LEDs to software properties -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmbq2tYUHGhkZWdvZWRl QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xKYAgAoXZt1MjBDA1mP813i4bj8CYQHWO+ YnugVhEccucxgC6sBGzQeRLBNuG/VaBN6tyJ1pKYMpWV5gSthq1Iop+DZbno2ciM QAnSSzioHB/dhYBXuKmZatkMsKLjLjtfcexUed9DfwKapqFl3XQMb6cEYasM37hH 197K4yAFF3oqQImlACwQDxN1q3eCG6bdIbEAByZW7yH644IC5zH8/CiFjTCwUx/F aFIHQlLLzt1kjhD8AbRHhRcsGbzG2ejHsC3yrQddEJSOkInDO8baR0aDyhBTUFPE lztuekFfaJ1Xcyoc/Zf4pi3ab1Djt+Htck3CHLO/xcl0YYMlM5vcs1QlhQ== =sAk7 -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers updates from Hans de Goede: - asus-wmi: Add support for vivobook fan profiles - dell-laptop: Add knobs to change battery charge settings - lg-laptop: Add operation region support - intel-uncore-freq: Add support for efficiency latency control - intel/ifs: Add SBAF test support - intel/pmc: Ignore all LTRs during suspend - platform/surface: Support for arm64 based Surface devices - wmi: Pass event data directly to legacy notify handlers - x86/platform/geode: switch GPIO buttons and LEDs to software properties - bunch of small cleanups, fixes, hw-id additions, etc. * tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) MAINTAINERS: adjust file entry in INTEL MID PLATFORM platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch buttons LED platform/mellanox: mlxbf-pmc: fix lockdep warning platform/x86/amd: pmf: Add quirk for TUF Gaming A14 platform/x86: touchscreen_dmi: add nanote-next quirk platform/x86: asus-wmi: don't fail if platform_profile already registered platform/x86: asus-wmi: add debug print in more key places platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to x86 subfolder platform/x86: intel_scu_ipc: Move intel_scu_ipc.h out of arch/x86/include/asm MAINTAINERS: Add Intel MID section platform/x86: panasonic-laptop: Add support for programmable buttons platform/olpc: Remove redundant null pointer checks in olpc_ec_setup_debugfs() platform/x86: intel/pmc: Ignore all LTRs during suspend platform/x86: wmi: Call both legacy and WMI driver notify handlers platform/x86: wmi: Merge get_event_data() with wmi_get_notify_data() platform/x86: wmi: Remove wmi_get_event_data() platform/x86: wmi: Pass event data directly to legacy notify handlers platform/x86: thinkpad_acpi: Fix uninitialized symbol 's' warning platform/x86: x86-android-tablets: Fix spelling in the comments platform/x86: ideapad-laptop: Make the scope_guard() clear of its scope ... |
||
|
Linus Torvalds
|
4a39ac5b7d |
Random number generator updates for Linux 6.12-rc1.
-----BEGIN PGP SIGNATURE-----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=mWCw
-----END PGP SIGNATURE-----
Merge tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
|
||
|
Linus Torvalds
|
cc52dc2fe3 |
pwm: Changes for v6.12-rc1
This pull request contains some cleanups to the core and some mostly minor updates to a bunch of drivers and device tree bindings. One thing worth pointing out is that it contains an immutable branch containing support for a new mfd chip (Analog Devices ADP5585) with several sub drivers. So expect to get the four affected commits also from my fellow MFD and GPIO maintainers. Thanks go to Andrew Kreimer, Clark Wang, Conor Dooley, David Lechner, Dmitry Rokosov, Frank Li, Geert Uytterhoeven, George Stark, Jiapeng Chong, Krzysztof Kozlowski, Laurent Pinchart, Liao Chen, Liu Ying, Rob Herring and Wolfram Sang for code contributions and reviews and to Lee Jones for preparing the above mentioned immutable branch. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmboM3AACgkQj4D7WH0S /k6IzQgAj+3B4F4UKPPI8jcQqRQGOWfjA365nIQmr1oeFYSGDILv4btU1TNV1MfH WLXMRXLQb4dng21J8IwIJ/qyndL+GjRj3KWxLHJa3+/gxf8YuGwWJlNjlxtrGXM/ 3JQ/aWqfgCf4KTRG3MoCTKc5fxtbHHWZ71kGdi6cchk1HggyBUH/7g85h/VkhCuc JpOC7CvDVmzTkTIltCbiVJQ4xO3zmsV2WgnsWUzN+41PUjqJmMLmhKjI6UdAYWlI B3qgCMXik153oYgaIw/BMtxFWa9e2ZxZ6hV+gx4tVQWbOtBPUxEqHpX2dt1fp5+h 7PQoKVWJycykdxmlOSGnjOl3RHVX5A== =VjPD -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm updates from Uwe Kleine-König: "This contains some cleanups to the core and some mostly minor updates to a bunch of drivers and device tree bindings. One thing worth pointing out is that it contains an immutable branch containing support for a new mfd chip (Analog Devices ADP5585) with several sub drivers. Thanks go to Andrew Kreimer, Clark Wang, Conor Dooley, David Lechner, Dmitry Rokosov, Frank Li, Geert Uytterhoeven, George Stark, Jiapeng Chong, Krzysztof Kozlowski, Laurent Pinchart, Liao Chen, Liu Ying, Rob Herring and Wolfram Sang for code contributions and reviews and to Lee Jones for preparing the above mentioned immutable branch" * tag 'pwm/for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (21 commits) pwm: stm32: Fix a typo dt-bindings: pwm: amlogic: Add new bindings for meson A1 PWM dt-bindings: pwm: amlogic: Add optional power-domains pwm: Switch back to struct platform_driver::remove() dt-bindings: pwm: allwinner,sun4i-a10-pwm: add top-level constraints pwm: axi-pwmgen: use shared macro for version reg pwm: atmel-hlcdc: Drop trailing comma pwm: atmel-hlcdc: Enable module autoloading pwm: omap-dmtimer: Use of_property_read_bool() pwm: adp5585: Set OSC_EN bit to 1 when PWM state is enabled pwm: lp3943: Fix an incorrect type in lp3943_pwm_parse_dt() pwm: Simplify pwm_capture() pwm: lp3943: Use of_property_count_u32_elems() to get property length pwm: Don't export pwm_capture() pwm: Make info in traces about affected pwm more useful dt-bindings: pwm: renesas,tpu: Add r8a779h0 support dt-bindings: pwm: renesas,pwm-rcar: Add r8a779h0 support pwm: adp5585: Add Analog Devices ADP5585 support gpio: adp5585: Add Analog Devices ADP5585 support mfd: adp5585: Add Analog Devices ADP5585 core support ... |
||
|
Linus Torvalds
|
067610ebaa |
RCU pull request for v6.12
This pull request contains the following branches:
context_tracking.15.08.24a: Rename context tracking state related
symbols and remove references to "dynticks" in various context
tracking state variables and related helpers; force
context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section.
csd.lock.15.08.24a: Enhance CSD-lock diagnostic reports; add an API
to provide an indication of ongoing CSD-lock stall.
nocb.09.09.24a: Update and simplify RCU nocb code to handle
(de-)offloading of callbacks only for offline CPUs; fix RT
throttling hrtimer being armed from offline CPU.
rcutorture.14.08.24a: Remove redundant rcu_torture_ops get_gp_completed
fields; add SRCU ->same_gp_state and ->get_comp_state
functions; add generic test for NUM_ACTIVE_*RCU_POLL* for
testing RCU and SRCU polled grace periods; add CFcommon.arch
for arch-specific Kconfig options; print number of update types
in rcu_torture_write_types();
add rcutree.nohz_full_patience_delay testing to the TREE07
scenario; add a stall_cpu_repeat module parameter to test
repeated CPU stalls; add argument to limit number of CPUs a
guest OS can use in torture.sh;
rcustall.09.09.24a: Abbreviate RCU CPU stall warnings during CSD-lock
stalls; Allow dump_cpu_task() to be called without disabling
preemption; defer printing stall-warning backtrace when holding
rcu_node lock.
srcu.12.08.24a: Make SRCU gp seq wrap-around faster; add KCSAN checks
for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays; mark idle SRCU-barrier
callbacks to help identify stuck SRCU-barrier callback.
rcu.tasks.14.08.24a: Remove RCU Tasks Rude asynchronous APIs as they
are no longer used; stop testing RCU Tasks Rude asynchronous
APIs; fix access to non-existent percpu regions; check
processor-ID assumptions during chosen CPU calculation for
callback enqueuing; update description of rtp->tasks_gp_seq
grace-period sequence number; add rcu_barrier_cb_is_done()
to identify whether a given rcu_barrier callback is stuck;
mark idle Tasks-RCU-barrier callbacks; add
*torture_stats_print() functions to print detailed
diagnostics for Tasks-RCU variants; capture start time of
rcu_barrier_tasks*() operation to help distinguish a hung
barrier operation from a long series of barrier operations.
rcu_scaling_tests.15.08.24a:
refscale: Add a TINY scenario to support tests of Tiny RCU
and Tiny SRCU; Optimize process_durations() operation;
rcuscale: Dump stacks of stalled rcu_scale_writer() instances;
dump grace-period statistics when rcu_scale_writer() stalls;
mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks; print detailed grace-period and barrier diagnostics
on rcu_scale_writer() hangs for Tasks-RCU variants; warn if
async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude;
make all writer tasks report upon hang; tolerate repeated
GFP_KERNEL failure in rcu_scale_writer(); use special allocator
for rcu_scale_writer(); NULL out top-level pointers to heap
memory to avoid double-free bugs on modprobe failures; maintain
per-task instead of per-CPU callbacks count to avoid any issues
with migration of either tasks or callbacks; constify struct
ref_scale_ops.
fixes.12.08.24a: Use system_unbound_wq for kfree_rcu work to avoid
disturbing isolated CPUs.
misc.11.08.24a: Warn on unexpected rcu_state.srs_done_tail state;
Better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines; annotate struct
kvfree_rcu_bulk_data with __counted_by().
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSi2tPIQIc2VEtjarIAHS7/6Z0wpQUCZt8+8wAKCRAAHS7/6Z0w
pTqoAPwPN//tlEoJx2PRs6t0q+nD1YNvnZawPaRmdzgdM8zJogD+PiSN+XhqRr80
jzyvMDU4Aa0wjUNP3XsCoaCxo7L/lQk=
=bZ9z
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Neeraj Upadhyay:
"Context tracking:
- rename context tracking state related symbols and remove references
to "dynticks" in various context tracking state variables and
related helpers
- force context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section
CSD lock:
- enhance CSD-lock diagnostic reports
- add an API to provide an indication of ongoing CSD-lock stall
nocb:
- update and simplify RCU nocb code to handle (de-)offloading of
callbacks only for offline CPUs
- fix RT throttling hrtimer being armed from offline CPU
rcutorture:
- remove redundant rcu_torture_ops get_gp_completed fields
- add SRCU ->same_gp_state and ->get_comp_state functions
- add generic test for NUM_ACTIVE_*RCU_POLL* for testing RCU and SRCU
polled grace periods
- add CFcommon.arch for arch-specific Kconfig options
- print number of update types in rcu_torture_write_types()
- add rcutree.nohz_full_patience_delay testing to the TREE07 scenario
- add a stall_cpu_repeat module parameter to test repeated CPU stalls
- add argument to limit number of CPUs a guest OS can use in
torture.sh
rcustall:
- abbreviate RCU CPU stall warnings during CSD-lock stalls
- Allow dump_cpu_task() to be called without disabling preemption
- defer printing stall-warning backtrace when holding rcu_node lock
srcu:
- make SRCU gp seq wrap-around faster
- add KCSAN checks for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays
- mark idle SRCU-barrier callbacks to help identify stuck
SRCU-barrier callback
rcu tasks:
- remove RCU Tasks Rude asynchronous APIs as they are no longer used
- stop testing RCU Tasks Rude asynchronous APIs
- fix access to non-existent percpu regions
- check processor-ID assumptions during chosen CPU calculation for
callback enqueuing
- update description of rtp->tasks_gp_seq grace-period sequence
number
- add rcu_barrier_cb_is_done() to identify whether a given
rcu_barrier callback is stuck
- mark idle Tasks-RCU-barrier callbacks
- add *torture_stats_print() functions to print detailed diagnostics
for Tasks-RCU variants
- capture start time of rcu_barrier_tasks*() operation to help
distinguish a hung barrier operation from a long series of barrier
operations
refscale:
- add a TINY scenario to support tests of Tiny RCU and Tiny
SRCU
- optimize process_durations() operation
rcuscale:
- dump stacks of stalled rcu_scale_writer() instances and
grace-period statistics when rcu_scale_writer() stalls
- mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks
- print detailed grace-period and barrier diagnostics on
rcu_scale_writer() hangs for Tasks-RCU variants
- warn if async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude
- make all writer tasks report upon hang
- tolerate repeated GFP_KERNEL failure in rcu_scale_writer()
- use special allocator for rcu_scale_writer()
- NULL out top-level pointers to heap memory to avoid double-free
bugs on modprobe failures
- maintain per-task instead of per-CPU callbacks count to avoid any
issues with migration of either tasks or callbacks
- constify struct ref_scale_ops
Fixes:
- use system_unbound_wq for kfree_rcu work to avoid disturbing
isolated CPUs
Misc:
- warn on unexpected rcu_state.srs_done_tail state
- better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines
- annotate struct kvfree_rcu_bulk_data with __counted_by()"
* tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (90 commits)
rcu: Defer printing stall-warning backtrace when holding rcu_node lock
rcu/nocb: Remove superfluous memory barrier after bypass enqueue
rcu/nocb: Conditionally wake up rcuo if not already waiting on GP
rcu/nocb: Fix RT throttling hrtimer armed from offline CPU
rcu/nocb: Simplify (de-)offloading state machine
context_tracking: Tag context_tracking_enabled_this_cpu() __always_inline
context_tracking, rcu: Rename rcu_dyntick trace event into rcu_watching
rcu: Update stray documentation references to rcu_dynticks_eqs_{enter, exit}()
rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
rcu: Rename rcu_implicit_dynticks_qs() into rcu_watching_snap_recheck()
rcu: Rename dyntick_save_progress_counter() into rcu_watching_snap_save()
rcu: Rename struct rcu_data .exp_dynticks_snap into .exp_watching_snap
rcu: Rename struct rcu_data .dynticks_snap into .watching_snap
rcu: Rename rcu_dynticks_zero_in_eqs() into rcu_watching_zero_in_eqs()
rcu: Rename rcu_dynticks_in_eqs_since() into rcu_watching_snap_stopped_since()
rcu: Rename rcu_dynticks_in_eqs() into rcu_watching_snap_in_eqs()
rcu: Rename rcu_dynticks_eqs_online() into rcu_watching_online()
context_tracking, rcu: Rename rcu_dynticks_curr_cpu_in_eqs() into rcu_is_watching_curr_cpu()
context_tracking, rcu: Rename rcu_dynticks_task*() into rcu_task*()
refscale: Constify struct ref_scale_ops
...
|
||
|
Linus Torvalds
|
2f27fce671 |
sound updates for 6.12-rc1
A fairly big update at this time, both in core and driver sides.
The core received rewrites in PCM buffer allocation handling and
locking optimizations, PCM rate updates followed by lots of cleanups.
In ASoC side, the legacy Intel drivers have been deprecated by AVS
drivers which leaded to the significant amount of code reduction.
SoundWire driver updates and other cleanups contributed more code
reduction, too.
USB-audio driver received a large cleanup of its big quirk table, and
the old snd_print*() API usages in many legacy drivers are replaced
with the standard print API.
Here are some highlights:
Core:
- More optimized locking in ALSA control code
- Rewrites of memalloc helpers for better DMA API usage
- Drop of obsoleted vmalloc PCM buffer helper API
- Continued MIDI2 UMP updates
- Support of a new user-space driven timer instance
- Update for more PCM support rates and cleanups
- Xrun counter report in the proc files
ASoC:
- Continued simplification and cleanup works for ASoC
- Extensive cleanups and refactoring of the Soundwire drivers
- Removal of Intel machine support obsoleted by the AVS driver
- Lots of DT schema conversions
- Machine support for many AMD and Intel x86 platforms
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
USB-audio:
- Add support of multiple control interfaces
- A large rewrite of quirk table with macros
- Support for RME Digiface USB
HD-audio:
- Cleanup of quirk code for Samsung Galaxy laptops
- Clean up of detection of Cirrus codecs
- C-Media CM9825 HD-audio codec support
Others:
- Rewrites to standard print API in a lot of legacy drivers
-----BEGIN PGP SIGNATURE-----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=HLUp
-----END PGP SIGNATURE-----
Merge tag 'sound-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"A fairly big update at this time, both in core and driver sides.
The core received rewrites in PCM buffer allocation handling and
locking optimizations, PCM rate updates followed by lots of cleanups.
In ASoC side, the legacy Intel drivers have been deprecated by AVS
drivers which leaded to the significant amount of code reduction.
SoundWire driver updates and other cleanups contributed more code
reduction, too.
USB-audio driver received a large cleanup of its big quirk table, and
the old snd_print*() API usages in many legacy drivers are replaced
with the standard print API.
Here are some highlights:
Core:
- More optimized locking in ALSA control code
- Rewrites of memalloc helpers for better DMA API usage
- Drop of obsoleted vmalloc PCM buffer helper API
- Continued MIDI2 UMP updates
- Support of a new user-space driven timer instance
- Update for more PCM support rates and cleanups
- Xrun counter report in the proc files
ASoC:
- Continued simplification and cleanup works for ASoC
- Extensive cleanups and refactoring of the Soundwire drivers
- Removal of Intel machine support obsoleted by the AVS driver
- Lots of DT schema conversions
- Machine support for many AMD and Intel x86 platforms
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek
RTL1320 SoundWire and rev C, and Texas Instruments TAS2563
USB-audio:
- Add support of multiple control interfaces
- A large rewrite of quirk table with macros
- Support for RME Digiface USB
HD-audio:
- Cleanup of quirk code for Samsung Galaxy laptops
- Clean up of detection of Cirrus codecs
- C-Media CM9825 HD-audio codec support
Others:
- Rewrites to standard print API in a lot of legacy drivers"
* tag 'sound-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (410 commits)
ASoC: topology: Fix redundant logical jump
ASoC: tas2781: Add Calibration Kcontrols for Chromebook
ASoC: amd: acp: refactor SoundWire machine driver code
ASoC: sdw_utils/intel: move soundwire endpoint parsing helper functions
ASoC: sdw_util/intel: move soundwire endpoint and dai link structures
ASoC: intel: sof_sdw: rename soundwire parsing helper functions
ASoC: intel: sof_sdw: rename soundwire endpoint and dailink structures
ASoC: atmel: mchp-pdmc: Retain Non-Runtime Controls
ALSA: hda/realtek: Add support for Galaxy Book2 Pro (NP950XEE)
ASoC: mediatek: mt7986-afe-pcm: Remove redundant error message
ALSA: memalloc: Use proper DMA mapping API for x86 S/G buffer allocations
ALSA: memalloc: Use proper DMA mapping API for x86 WC buffer allocations
ALSA: usb-audio: Add logitech Audio profile quirk
ASoc: mediatek: mt8365: Remove unneeded assignment
ASoC: Intel: ARL: Add entry for HDMI-In capture support to non-I2S codec boards.
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for ARL.
ASoC: SOF: Intel: hda: remove common_hdmi_codec_drv
ASoC: Intel: sof_pcm512x: do not check common_hdmi_codec_drv
ASoC: Intel: ehl_rt5660: do not check common_hdmi_codec_drv
ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links
...
|
||
|
Hongbo Li
|
318580ad7f
|
hugetlbfs: support tracepoint
Add basic tracepoints for {alloc, evict, free}_inode, setattr and
fallocate. These can help users to debug hugetlbfs more conveniently.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240829064110.67884-2-lihongbo22@huawei.com
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
Linus Torvalds
|
7a40974fd0 |
for-6.12-tag
-----BEGIN PGP SIGNATURE-----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=kDNG
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This brings mostly refactoring, cleanups, minor performance
optimizations and usual fixes. The folio API conversions are most
noticeable.
There's one less visible change that could have a high impact. The
extent lock scope for read is reduced, not held for the entire
operation. In the buffered read case it's left to page or inode lock,
some direct io read synchronization is still needed.
This used to prevent deadlocks induced by page faults during direct
io, so there was a 4K limitation on the requests, e.g. for io_uring.
In the future this will allow smoother integration with iomap where
the extent read lock was a major obstacle.
User visible changes:
- the FSTRIM ioctl updates the processed range even after an error or
interruption
- cleaner thread is woken up in SYNC ioctl instead of waking the
transaction thread that can take some delay before waking up the
cleaner, this can speed up cleaning of deleted subvolumes
- print an error message when opening a device fail, e.g. when it's
unexpectedly read-only
Core changes:
- improved extent map handling in various ways (locking, iteration, ...)
- new assertions and locking annotations
- raid-stripe-tree locking fixes
- use xarray for tracking dirty qgroup extents, switched from rb-tree
- turn the subpage test to compile-time condition if possible (e.g.
on x86_64 with 4K pages), this allows to skip a lot of ifs and
remove dead code
- more preparatory work for compression in subpage mode
Cleanups and refactoring
- folio API conversions, many simple cases where page is passed so
switch it to folios
- more subpage code refactoring, update page state bitmap processing
- introduce auto free for btrfs_path structure, use for the simple
cases"
* tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (110 commits)
btrfs: only unlock the to-be-submitted ranges inside a folio
btrfs: merge btrfs_folio_unlock_writer() into btrfs_folio_end_writer_lock()
btrfs: BTRFS_PATH_AUTO_FREE in orphan.c
btrfs: use btrfs_path auto free in zoned.c
btrfs: DEFINE_FREE for struct btrfs_path
btrfs: remove btrfs_folio_end_all_writers()
btrfs: constify more pointer parameters
btrfs: rework BTRFS_I as macro to preserve parameter const
btrfs: add and use helper to verify the calling task has locked the inode
btrfs: always update fstrim_range on failure in FITRIM ioctl
btrfs: convert copy_inline_to_page() to use folio
btrfs: convert btrfs_decompress() to take a folio
btrfs: convert zstd_decompress() to take a folio
btrfs: convert lzo_decompress() to take a folio
btrfs: convert zlib_decompress() to take a folio
btrfs: convert try_release_extent_mapping() to take a folio
btrfs: convert try_release_extent_state() to take a folio
btrfs: convert submit_eb_page() to take a folio
btrfs: convert submit_eb_subpage() to take a folio
btrfs: convert read_key_bytes() to take a folio
...
|
||
|
Linus Torvalds
|
35219bc5c7 |
vfs-6.12.netfs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEvgAKCRCRxhvAZXjc
onQWAQD6IxAKPU0zom2FoWNilvSzPs7WglTtvddX9pu/lT1RNAD/YC/wOLW8mvAv
9oTAmigQDQQhEWdJA9RgLZBiw7k+DAw=
=zWFb
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This contains the work to improve read/write performance for the new
netfs library.
The main performance enhancing changes are:
- Define a structure, struct folio_queue, and a new iterator type,
ITER_FOLIOQ, to hold a buffer as a replacement for ITER_XARRAY. See
that patch for questions about naming and form.
ITER_FOLIOQ is provided as a replacement for ITER_XARRAY. The
problem with an xarray is that accessing it requires the use of a
lock (typically the RCU read lock) - and this means that we can't
supply iterate_and_advance() with a step function that might sleep
(crypto for example) without having to drop the lock between pages.
ITER_FOLIOQ is the iterator for a chain of folio_queue structs,
where each folio_queue holds a small list of folios. A folio_queue
struct is a simpler structure than xarray and is not subject to
concurrent manipulation by the VM. folio_queue is used rather than
a bvec[] as it can form lists of indefinite size, adding to one end
and removing from the other on the fly.
- Provide a copy_folio_from_iter() wrapper.
- Make cifs RDMA support ITER_FOLIOQ.
- Use folio queues in the write-side helpers instead of xarrays.
- Add a function to reset the iterator in a subrequest.
- Simplify the write-side helpers to use sheaves to skip gaps rather
than trying to work out where gaps are.
- In afs, make the read subrequests asynchronous, putting them into
work items to allow the next patch to do progressive
unlocking/reading.
- Overhaul the read-side helpers to improve performance.
- Fix the caching of a partial block at the end of a file.
- Allow a store to be cancelled.
Then some changes for cifs to make it use folio queues instead of
xarrays for crypto bufferage:
- Use raw iteration functions rather than manually coding iteration
when hashing data.
- Switch to using folio_queue for crypto buffers.
- Remove the xarray bits.
Make some adjustments to the /proc/fs/netfs/stats file such that:
- All the netfs stats lines begin 'Netfs:' but change this to
something a bit more useful.
- Add a couple of stats counters to track the numbers of skips and
waits on the per-inode writeback serialisation lock to make it
easier to check for this as a source of performance loss.
Miscellaneous work:
- Ensure that the sb_writers lock is taken around
vfs_{set,remove}xattr() in the cachefiles code.
- Reduce the number of conditional branches in netfs_perform_write().
- Move the CIFS_INO_MODIFIED_ATTR flag to the netfs_inode struct and
remove cifs_post_modify().
- Move the max_len/max_nr_segs members from netfs_io_subrequest to
netfs_io_request as they're only needed for one subreq at a time.
- Add an 'unknown' source value for tracing purposes.
- Remove NETFS_COPY_TO_CACHE as it's no longer used.
- Set the request work function up front at allocation time.
- Use bh-disabling spinlocks for rreq->lock as cachefiles completion
may be run from block-filesystem DIO completion in softirq context.
- Remove fs/netfs/io.c"
* tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
docs: filesystems: corrected grammar of netfs page
cifs: Don't support ITER_XARRAY
cifs: Switch crypto buffer to use a folio_queue rather than an xarray
cifs: Use iterate_and_advance*() routines directly for hashing
netfs: Cancel dirty folios that have no storage destination
cachefiles, netfs: Fix write to partial block at EOF
netfs: Remove fs/netfs/io.c
netfs: Speed up buffered reading
afs: Make read subreqs async
netfs: Simplify the writeback code
netfs: Provide an iterator-reset function
netfs: Use new folio_queue data type and iterator instead of xarray iter
cifs: Provide the capability to extract from ITER_FOLIOQ to RDMA SGEs
iov_iter: Provide copy_folio_from_iter()
mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios
netfs: Use bh-disabling spinlocks for rreq->lock
netfs: Set the request work function upon allocation
netfs: Remove NETFS_COPY_TO_CACHE
netfs: Reserve netfs_sreq_source 0 as unset/unknown
netfs: Move max_len/max_nr_segs from netfs_io_subrequest to netfs_io_stream
...
|
||
|
Linus Torvalds
|
ee25861f26 |
vfs-6.12.fallocate
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEwAAKCRCRxhvAZXjc omD7AQCZuWPXkEGYFD37MJZuRXNEoq7Tuj6yd0O2b5khUpzvyAD+MPuthGiCMPsu voPpUP83x7T0D3JsEsCAXtNeVRcIBQI= =xTs6 -----END PGP SIGNATURE----- Merge tag 'vfs-6.12.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fallocate updates from Christian Brauner: "This contains work to try and cleanup some the fallocate mode handling. Currently, it confusingly mixes operation modes and an optional flag. The work here tries to better define operation modes and optional flags allowing the core and filesystem code to use switch statements to switch on the operation mode" * tag 'vfs-6.12.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: xfs: refactor xfs_file_fallocate xfs: move the xfs_is_always_cow_inode check into xfs_alloc_file_space xfs: call xfs_flush_unmap_range from xfs_free_file_space fs: sort out the fallocate mode vs flag mess ext4: remove tracing for FALLOC_FL_NO_HIDE_STALE block: remove checks for FALLOC_FL_NO_HIDE_STALE |
||
|
Linus Torvalds
|
8f72c31f45 |
vfs-6.12.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEGwAKCRCRxhvAZXjc
ojIuAQC433+hBkvjvmQ7H0r5rgZSjUuCTG3bSmdU7RJmPHUHhwEA85v/NGq53f+W
IhandK6t+Cf0JYpFZ3N0bT88hDYVhQQ=
=9zGL
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
|
||
|
Christophe Leroy
|
d175ee98fe |
mm: Define VM_DROPPABLE for powerpc/32
Commit
|
||
|
Jakub Kicinski
|
3b7dc7000e |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZuH9UQAKCRDbK58LschI g0/zAP99WOcCBp1M/jSTUOba230+eiol7l5RirDEA6wu7TqY2QEAuvMG0KfCCpTI I0WqStrK1QMbhwKPodJC1k+17jArKgw= =jfMU -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-09-11 We've added 12 non-merge commits during the last 16 day(s) which contain a total of 20 files changed, 228 insertions(+), 30 deletions(-). There's a minor merge conflict in drivers/net/netkit.c: |
||
|
Takashi Sakamoto
|
f1cba5212e |
firewire: core: rename cause flag of tracepoints event
The flag of FW_ISO_CONTEXT_COMPLETIONS_CAUSE_IRQ directly causes hardIRQ request by 1394 OHCI hardware when the corresponding isochronous packet is transferred, however it is not so directly associated to hardIRQ processing itself. This commit renames the flag so that it relates to interrupt parameter of internal packet data. Link: https://lore.kernel.org/r/20240912133038.238786-6-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
David Howells
|
8f246b7c0a
|
netfs: Cancel dirty folios that have no storage destination
Kafs wants to be able to cache the contents of directories (and symlinks), but whilst these are downloaded from the server with the FS.FetchData RPC op and similar, the same as for regular files, they can't be updated by FS.StoreData, but rather have special operations (FS.MakeDir, etc.). Now, rather than redownloading a directory's content after each change made to that directory, kafs modifies the local blob. This blob can be saved out to the cache, and since it's using netfslib, kafs just marks the folios dirty and lets ->writepages() on the directory take care of it, as for an regular file. This is fine as long as there's a cache as although the upload stream is disabled, there's a cache stream to drive the procedure. But if the cache goes away in the meantime, suddenly there's no way do any writes and the code gets confused, complains "R=%x: No submit" to dmesg and leaves the dirty folio hanging. Fix this by just cancelling the store of the folio if neither stream is active. (If there's no cache at the time of dirtying, we should just not mark the folio dirty). Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-23-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
ee4cdf7ba8
|
netfs: Speed up buffered reading
Improve the efficiency of buffered reads in a number of ways:
(1) Overhaul the algorithm in general so that it's a lot more compact and
split the read submission code between buffered and unbuffered
versions. The unbuffered version can be vastly simplified.
(2) Read-result collection is handed off to a work queue rather than being
done in the I/O thread. Multiple subrequests can be processes
simultaneously.
(3) When a subrequest is collected, any folios it fully spans are
collected and "spare" data on either side is donated to either the
previous or the next subrequest in the sequence.
Notes:
(*) Readahead expansion is massively slows down fio, presumably because it
causes a load of extra allocations, both folio and xarray, up front
before RPC requests can be transmitted.
(*) RDMA with cifs does appear to work, both with SIW and RXE.
(*) PG_private_2-based reading and copy-to-cache is split out into its own
file and altered to use folio_queue. Note that the copy to the cache
now creates a new write transaction against the cache and adds the
folios to be copied into it. This allows it to use part of the
writeback I/O code.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-20-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
David Howells
|
983cdcf8fe
|
netfs: Simplify the writeback code
Use the new folio_queue structures to simplify the writeback code. The problem with referring to the i_pages xarray directly is that we may have gaps in the sequence of folios we're writing from that we need to skip when we're removing the writeback mark from the folios we're writing back from. At the moment the code tries to deal with this by carefully tracking the gaps in each writeback stream (eg. write to server and write to cache) and divining when there's a gap that spans folios (something that's not helped by folios not being a consistent size). Instead, the folio_queue buffer contains pointers only the folios we're dealing with, has them in ascending order and indicates a gap by placing non-consequitive folios next to each other. This makes it possible to track where we need to clean up to by just keeping track of where we've processed to on each stream and taking the minimum. Note that the I/O iterator is always rounded up to the end of the folio, even if that is beyond the EOF position, so that the cache can do DIO from the page. The excess space is cleared, though mmapped writes clobber it. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-18-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
cd0277ed0c
|
netfs: Use new folio_queue data type and iterator instead of xarray iter
Make the netfs write-side routines use the new folio_queue struct to hold a rolling buffer of folios, with the issuer adding folios at the tail and the collector removing them from the head as they're processed instead of using an xarray. This will allow a subsequent patch to simplify the write collector. The primary mark (as tested by folioq_is_marked()) is used to note if the corresponding folio needs putting. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-16-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Mina Almasry
|
8ab79ed50c |
page_pool: devmem support
Convert netmem to be a union of struct page and struct netmem. Overload
the LSB of struct netmem* to indicate that it's a net_iov, otherwise
it's a page.
Currently these entries in struct page are rented by the page_pool and
used exclusively by the net stack:
struct {
unsigned long pp_magic;
struct page_pool *pp;
unsigned long _pp_mapping_pad;
unsigned long dma_addr;
atomic_long_t pp_ref_count;
};
Mirror these (and only these) entries into struct net_iov and implement
netmem helpers that can access these common fields regardless of
whether the underlying type is page or net_iov.
Implement checks for net_iov in netmem helpers which delegate to mm
APIs, to ensure net_iov are never passed to the mm stack.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-6-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Philo Lu
|
edd3f6f758 |
tcp: Use skb__nullable in trace_tcp_send_reset
Replace skb with skb__nullable as the argument name. The suffix tells bpf verifier through btf that the arg could be NULL and should be checked in tp_btf prog. For now, this is the only nullable argument in tcp tracepoints. Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240911033719.91468-4-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
|
David Sterba
|
ca283ea992 |
btrfs: constify more pointer parameters
Continue adding const to parameters. This is for clarity and minor addition to safety. There are some minor effects, in the assembly code and .ko measured on release config. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
06de42c5a9 |
btrfs: rename __extent_writepage() and drop double underscores
The function does not follow the pattern where the underscores would be justified, so rename it. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
9e97e8b277 |
btrfs: update the writepage tracepoint to take a folio
Willy is wanting to get rid of page->index, convert the writepage tracepoint to take a folio so we can do folio->index instead of page->index. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Sean Anderson
|
038eb433dc |
dma-mapping: add tracing for dma-mapping API calls
When debugging drivers, it can often be useful to trace when memory gets (un)mapped for DMA (and can be accessed by the device). Add some tracepoints for this purpose. Use u64 instead of phys_addr_t and dma_addr_t (and similarly %llx instead of %pa) because libtraceevent can't handle typedefs in all cases. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Hans de Goede
|
56d8b784c5 |
hwmon fixes for v6.11-rc7
hp-wmi-sensors: Check if WMI event data exists before accessing it
ltc2991: fix register bits defines
-----BEGIN PGP SIGNATURE-----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=sSGh
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.11-rc7' into review-hans
Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit
|
||
|
Uwe Kleine-König
|
1c3e34bf88 |
pwm: Make info in traces about affected pwm more useful
The hashed pointer isn't useful to identify the pwm device. Instead store and emit chipid and hwpwm. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240705211452.1157967-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org> |
||
|
David Howells
|
c57de2a925
|
netfs: Remove NETFS_COPY_TO_CACHE
Remove NETFS_COPY_TO_CACHE as it isn't used anymore. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-10-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
51e9a86a4f
|
netfs: Reserve netfs_sreq_source 0 as unset/unknown
Reserve the 0-valued netfs_sreq_source to mean unset or unknown so that it can be seen in the trace as such rather than appearing as download-from-server when it's going to get switched to something else. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-9-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
8f52de0077
|
netfs: Reduce number of conditional branches in netfs_perform_write()
Reduce the number of conditional branches in netfs_perform_write() by merging in netfs_how_to_modify() and then creating a separate if-statement for each way we might modify a folio. Note that this means replicating the data copy in each path. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-6-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Tejun Heo
|
649e980dad |
Merge branch 'bpf/master' into for-6.12
Pull bpf/master to receive
|
||
|
Matthew Wilcox (Oracle)
|
7a87225ae2 |
x86: remove PG_uncached
Convert x86 to use PG_arch_2 instead of PG_uncached and remove PG_uncached. Link: https://lkml.kernel.org/r/20240821193445.2294269-11-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
02e1960aaf |
mm: rename PG_mappedtodisk to PG_owner_2
This flag has similar constraints to PG_owner_priv_1 -- it is ignored by core code, and is entirely for the use of the code which allocated the folio. Since the pagecache does not use it, individual filesystems can use it. The bufferhead code does use it, so filesystems which use the buffer cache must not use it for another purpose. Link: https://lkml.kernel.org/r/20240821193445.2294269-10-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
e27ad6560e |
printf: remove %pGt support
Patch series "Increase the number of bits available in page_type". Kent wants more than 16 bits in page_type, so I resurrected this old patch and expanded it a bit. It's a bit more efficient than our current scheme (1 4-byte insn vs 3 insns of 13 bytes total) to test a single page type. This patch (of 4): An upcoming patch will convert page type from being a bitfield to a single byte, so we will not be able to use %pG to print the page type any more. The printing of the symbolic name will be restored in that patch. Link: https://lkml.kernel.org/r/20240821173914.2270383-1-willy@infradead.org Link: https://lkml.kernel.org/r/20240821173914.2270383-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Takaya Saeki
|
b6273b55d8 |
filemap: add trace events for get_pages, map_pages, and fault
To allow precise tracking of page caches accessed, add new tracepoints that trigger when a process actually accesses them. The ureadahead program used by ChromeOS traces the disk access of programs as they start up at boot up. It uses mincore(2) or the 'mm_filemap_add_to_page_cache' trace event to accomplish this. It stores this information in a "pack" file and on subsequent boots, it will read the pack file and call readahead(2) on the information so that disk storage can be loaded into RAM before the applications actually need it. A problem we see is that due to the kernel's readahead algorithm that can aggressively pull in more data than needed (to try and accomplish the same goal) and this data is also recorded. The end result is that the pack file contains a lot of pages on disk that are never actually used. Calling readahead(2) on these unused pages can slow down the system boot up times. To solve this, add 3 new trace events, get_pages, map_pages, and fault. These will be used to trace the pages are not only pulled in from disk, but are actually used by the application. Only those pages will be stored in the pack file, and this helps out the performance of boot up. With the combination of these 3 new trace events and mm_filemap_add_to_page_cache, we observed a reduction in the pack file by 7.3% - 20% on ChromeOS varying by device. Link: https://lkml.kernel.org/r/20240813100312.3930505-1-takayas@chromium.org Signed-off-by: Takaya Saeki <takayas@chromium.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Junichi Uekawa <uekawa@chromium.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
09022bc196 |
mm: remove PG_error
The PG_error bit is now unused; delete it and free up a bit in page->flags. Link: https://lkml.kernel.org/r/20240807193528.1865100-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Wei Yang
|
29943248af |
mm: improve code consistency with zonelist_* helper functions
Replace direct access to zoneref->zone, zoneref->zone_idx, or zone_to_nid(zoneref->zone) with the corresponding zonelist_* helper functions for consistency. No functional change. Link: https://lkml.kernel.org/r/20240729091717.464-1-shivankg@amd.com Co-developed-by: Shivank Garg <shivankg@amd.com> Signed-off-by: Shivank Garg <shivankg@amd.com> Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Chen Hanxiao
|
cef48236df |
NFS: trace: show TIMEDOUT instead of 0x6e
__nfs_revalidate_inode may return ETIMEDOUT. print symbol of ETIMEDOUT in nfs trace: before: cat-5191 [005] 119.331127: nfs_revalidate_inode_exit: error=-110 (0x6e) after: cat-1738 [004] 44.365509: nfs_revalidate_inode_exit: error=-110 (TIMEDOUT) Signed-off-by: Chen Hanxiao <chenhx.fnst@fujitsu.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Julian Sun
|
459ca85ae1 |
writeback: Refine the show_inode_state() macro definition
Currently, the show_inode_state() macro only prints part of the state of inode->i_state. Let’s improve it to display more of its state. Signed-off-by: Julian Sun <sunjunchao2870@gmail.com> Link: https://lore.kernel.org/r/20240828081359.62429-1-sunjunchao2870@gmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Christoph Hellwig
|
f951171044 |
ext4: remove tracing for FALLOC_FL_NO_HIDE_STALE
FALLOC_FL_NO_HIDE_STALE can't make it past vfs_fallocate (and if the flag does what the name implies that's a good thing as it would be highly dangerous). Remove the dead tracing code for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240827065123.1762168-3-hch@lst.de Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Avri Altman
|
89835a58f5 |
scsi: ufs: Move UFS trace events to private header
UFS trace events are called exclusively from the UFS core drivers. Make those events private to the core driver. The MAINTAINERS file does not need updating as the maintainership remains the same and the relevant directory is already covered. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20240821055411.3128159-1-avri.altman@wdc.com Acked-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Chuck Lever
|
dc0112e6d8 |
rpcrdma: Trace connection registration and unregistration
These new trace points record xarray indices and the time of endpoint registration and unregistration, to co-ordinate with device removal events. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> |
||
|
Takashi Iwai
|
41776e4008 |
Merge branch 'topic/seq-filter-cleanup' into for-next
Pull ALSA sequencer cleanup. Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
Valentin Schneider
|
4f336dc07e |
context_tracking, rcu: Rename rcu_dyntick trace event into rcu_watching
The "rcu_dyntick" naming convention has been turned into "rcu_watching" for all helpers now, align the trace event to that. To add to the confusion, the strings passed to the trace event are now reversed: when RCU "starts" the dyntick / EQS state, it "stops" watching. Signed-off-by: Valentin Schneider <vschneid@redhat.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org> |
||
|
Chao Yu
|
aaf8c0b9ae |
f2fs: reduce expensive checkpoint trigger frequency
We may trigger high frequent checkpoint for below case: 1. mkdir /mnt/dir1; set dir1 encrypted 2. touch /mnt/file1; fsync /mnt/file1 3. mkdir /mnt/dir2; set dir2 encrypted 4. touch /mnt/file2; fsync /mnt/file2 ... Although, newly created dir and file are not related, due to commit |
||
|
Linus Torvalds
|
4ac0f08f44 |
vfs-6.11-rc4.fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZrym4AAKCRCRxhvAZXjc
oqT3AP9ydoUNavaZcRayH8r3ybvz9+aJGJ6Q7NznFVCk71vn0gD/buLzmq96Muns
M5DWHbft2AFwK0Rz2nx8j5OXUeHwrQg=
=HZBL
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- Fix the name of file lease slab cache. When file leases were split
out of file locks the name of the file lock slab cache was used for
the file leases slab cache as well.
- Fix a type in take_fd() helper.
- Fix infinite directory iteration for stable offsets in tmpfs.
- When the icache is pruned all reclaimable inodes are marked with
I_FREEING and other processes that try to lookup such inodes will
block.
But some filesystems like ext4 can trigger lookups in their inode
evict callback causing deadlocks. Ext4 does such lookups if the
ea_inode feature is used whereby a separate inode may be used to
store xattrs.
Introduce I_LRU_ISOLATING which pins the inode while its pages are
reclaimed. This avoids inode deletion during inode_lru_isolate()
avoiding the deadlock and evict is made to wait until
I_LRU_ISOLATING is done.
netfs:
- Fault in smaller chunks for non-large folio mappings for
filesystems that haven't been converted to large folios yet.
- Fix the CONFIG_NETFS_DEBUG config option. The config option was
renamed a short while ago and that introduced two minor issues.
First, it depended on CONFIG_NETFS whereas it wants to depend on
CONFIG_NETFS_SUPPORT. The former doesn't exist, while the latter
does. Second, the documentation for the config option wasn't fixed
up.
- Revert the removal of the PG_private_2 writeback flag as ceph is
using it and fix how that flag is handled in netfs.
- Fix DIO reads on 9p. A program watching a file on a 9p mount
wouldn't see any changes in the size of the file being exported by
the server if the file was changed directly in the source
filesystem. Fix this by attempting to read the full size specified
when a DIO read is requested.
- Fix a NULL pointer dereference bug due to a data race where a
cachefiles cookies was retired even though it was still in use.
Check the cookie's n_accesses counter before discarding it.
nsfs:
- Fix ioctl declaration for NS_GET_MNTNS_ID from _IO() to _IOR() as
the kernel is writing to userspace.
pidfs:
- Prevent the creation of pidfds for kthreads until we have a
use-case for it and we know the semantics we want. It also confuses
userspace why they can get pidfds for kthreads.
squashfs:
- Fix an unitialized value bug reported by KMSAN caused by a
corrupted symbolic link size read from disk. Check that the
symbolic link size is not larger than expected"
* tag 'vfs-6.11-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Squashfs: sanity check symbolic link size
9p: Fix DIO read through netfs
vfs: Don't evict inode under the inode lru traversing context
netfs: Fix handling of USE_PGPRIV2 and WRITE_TO_CACHE flags
netfs, ceph: Revert "netfs: Remove deprecated use of PG_private_2 as a second writeback flag"
file: fix typo in take_fd() comment
pidfd: prevent creation of pidfds for kthreads
netfs: clean up after renaming FSCACHE_DEBUG config
libfs: fix infinite directory reads for offset dir
nsfs: fix ioctl declaration
fs/netfs/fscache_cookie: add missing "n_accesses" check
filelock: fix name of file_lease slab cache
netfs: Fault in smaller chunks for non-large folio mappings
|
||
|
David Howells
|
7b589a9b45
|
netfs: Fix handling of USE_PGPRIV2 and WRITE_TO_CACHE flags
The NETFS_RREQ_USE_PGPRIV2 and NETFS_RREQ_WRITE_TO_CACHE flags aren't used
correctly. The problem is that we try to set them up in the request
initialisation, but we the cache may be in the process of setting up still,
and so the state may not be correct. Further, we secondarily sample the
cache state and make contradictory decisions later.
The issue arises because we set up the cache resources, which allows the
cache's ->prepare_read() to switch on NETFS_SREQ_COPY_TO_CACHE - which
triggers cache writing even if we didn't set the flags when allocating.
Fix this in the following way:
(1) Drop NETFS_ICTX_USE_PGPRIV2 and instead set NETFS_RREQ_USE_PGPRIV2 in
->init_request() rather than trying to juggle that in
netfs_alloc_request().
(2) Repurpose NETFS_RREQ_USE_PGPRIV2 to merely indicate that if caching is
to be done, then PG_private_2 is to be used rather than only setting
it if we decide to cache and then having netfs_rreq_unlock_folios()
set the non-PG_private_2 writeback-to-cache if it wasn't set.
(3) Split netfs_rreq_unlock_folios() into two functions, one of which
contains the deprecated code for using PG_private_2 to avoid
accidentally doing the writeback path - and always use it if
USE_PGPRIV2 is set.
(4) As NETFS_ICTX_USE_PGPRIV2 is removed, make netfs_write_begin() always
wait for PG_private_2. This function is deprecated and only used by
ceph anyway, and so label it so.
(5) Drop the NETFS_RREQ_WRITE_TO_CACHE flag and use
fscache_operation_valid() on the cache_resources instead. This has
the advantage of picking up the result of netfs_begin_cache_read() and
fscache_begin_write_operation() - which are called after the object is
initialised and will wait for the cache to come to a usable state.
Just reverting ae678317b95e[1] isn't a sufficient fix, so this need to be
applied on top of that. Without this as well, things like:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: {
and:
WARNING: CPU: 13 PID: 3621 at fs/ceph/caps.c:3386
may happen, along with some UAFs due to PG_private_2 not getting used to
wait on writeback completion.
Fixes:
|
||
|
David Howells
|
8e5ced7804
|
netfs, ceph: Revert "netfs: Remove deprecated use of PG_private_2 as a second writeback flag"
This reverts commit |
||
|
Jithu Joseph
|
61b7496453 |
trace: platform/x86/intel/ifs: Add SBAF trace support
Add tracing support for the SBAF IFS tests, which may be useful for debugging systems that fail these tests. Log details like test content batch number, SBAF bundle ID, program index and the exact errors or warnings encountered by each HT thread during the test. Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/20240801051814.1935149-5-sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Valentin Schneider
|
bf66471987 |
context_tracking, rcu: Rename struct context_tracking .dynticks_nesting into .nesting
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to RCU_WATCHING, reflect that change in the related helpers. [ neeraj.upadhyay: Fix htmldocs build error reported by Stephen Rothwell ] Suggested-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Valentin Schneider <vschneid@redhat.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org> |
||
|
Takashi Iwai
|
4004f3029e |
Merge branch 'topic/control-lookup-rwlock' into for-next
Pull control lookup optimization changes. Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
Linus Torvalds
|
183d46ff42 |
Including fixes from wireless, bleutooth, BPF and netfilter.
Current release - regressions:
- core: drop bad gso csum_start and offset in virtio_net_hdr
- wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove
- eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic()
- phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and aqr115c
Current release - new code bugs:
- smc: prevent UAF in inet_create()
- bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend
- eth: bnxt: reject unsupported hash functions
Previous releases - regressions:
- sched: act_ct: take care of padding in struct zones_ht_key
- netfilter: fix null-ptr-deref in iptable_nat_table_init().
- tcp: adjust clamping window for applications specifying SO_RCVBUF
Previous releases - always broken:
- ethtool: rss: small fixes to spec and GET
- mptcp:
- fix signal endpoint re-add
- pm: fix backup support in signal endpoints
- wifi: ath12k: fix soft lockup on suspend
- eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings()
- eth: ice: fix AF_XDP ZC timeout and concurrency issues
- eth: mlx5:
- fix missing lock on sync reset reload
- fix error handling in irq_pool_request_irq
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=z53B
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, bleutooth, BPF and netfilter.
Current release - regressions:
- core: drop bad gso csum_start and offset in virtio_net_hdr
- wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove
- eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic()
- phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and
aqr115c
Current release - new code bugs:
- smc: prevent UAF in inet_create()
- bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend
- eth: bnxt: reject unsupported hash functions
Previous releases - regressions:
- sched: act_ct: take care of padding in struct zones_ht_key
- netfilter: fix null-ptr-deref in iptable_nat_table_init().
- tcp: adjust clamping window for applications specifying SO_RCVBUF
Previous releases - always broken:
- ethtool: rss: small fixes to spec and GET
- mptcp:
- fix signal endpoint re-add
- pm: fix backup support in signal endpoints
- wifi: ath12k: fix soft lockup on suspend
- eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings()
- eth: ice: fix AF_XDP ZC timeout and concurrency issues
- eth: mlx5:
- fix missing lock on sync reset reload
- fix error handling in irq_pool_request_irq"
* tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
mptcp: fix duplicate data handling
mptcp: fix bad RCVPRUNED mib accounting
ipv6: fix ndisc_is_useropt() handling for PIO
igc: Fix double reset adapter triggered from a single taprio cmd
net: MAINTAINERS: Demote Qualcomm IPA to "maintained"
net: wan: fsl_qmc_hdlc: Discard received CRC
net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex
net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys
net/mlx5e: Fix CT entry update leaks of modify header context
net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability
net/mlx5: Fix missing lock on sync reset reload
net/mlx5: Lag, don't use the hardcoded value of the first port
net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule
net/mlx5: Fix error handling in irq_pool_request_irq
net/mlx5: Always drain health in shutdown callback
net: Add skbuff.h to MAINTAINERS
r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY
netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().
netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().
net: drop bad gso csum_start and offset in virtio_net_hdr
...
|
||
|
Kuninori Morimoto
|
469b77e421 |
ALSA: trace: use snd_pcm_direction_name()
We already have snd_pcm_direction_name(). Let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/87sevrk52f.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
Linus Torvalds
|
e4fc196f5b |
for-6.11-rc1-tag
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmapmOQACgkQxWXV+ddt WDsXVhAAi4X+xt3o4jcN3IAu08JCQAAyXnFWC3lvn7sqYjSrcccI6ZT4/gAbHss+ qrifakRGoYQ7fAjYBmhw48HqPmHtI2OQjIUDaIqHQOS68aXShBo9HiE460HRY4GT QV/KT0w37E2/R0EDR9gyjLq3ZA3/raxN1n+LNCFhRWmtsAEZrk4XzsADWb05YkIq 1QBa92DzEhVpd04X8YHIYBgRidWbcYST6xhoWdyL9VZ1pzZsISq5LH67D4f/J1KU gXNf+ZnF9DXsQnptJrMsjhx61seJ2F0/vozFZ+l6SjRr0jeysmrJI0dxqQc/hUga gbLmdha6ztKdn03JOIL+lfdZYzICFl/2fekSWI2SNcag+TYszACjlFOyHusOgKsa 3qQwzVB699FheWO5nrOOvOtgq0ZqGsrIvhIXLhA7/bVpNavPnUB7IQCcs8n89ImQ hUIebfX1FZnYXTrB6Hhm92LUb0lyLSlW1we3SSmaAMiy1TiXHG7hO2G/sIbOPAJC 5VzdHf0DEjzEdjmTrGOV7JBfy5JmMK56oN8viZS95p70DYxNGvEOhLs/8n5twpri MWV8GElcOjjC+KnGnUH72spsnEKONpdzyccG9kiZEgkEi4csgHSxrkSmAehYD6i6 MFYk+i7jvZ1VsbOulmdGOLbHS7whxi9pWb/CT3KKF1Ei5/v07bU= =JdOX -----END PGP SIGNATURE----- Merge tag 'for-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix regression in extent map rework when handling insertion of overlapping compressed extent - fix unexpected file length when appending to a file using direct io and buffer not faulted in - in zoned mode, fix accounting of unusable space when flipping read-only block group back to read-write - fix page locking when COWing an inline range, assertion failure found by syzbot - fix calculation of space info in debugging print - tree-checker, add validation of data reference item - fix a few -Wmaybe-uninitialized build warnings * tag 'for-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: initialize location to fix -Wmaybe-uninitialized in btrfs_lookup_dentry() btrfs: fix corruption after buffer fault in during direct IO append write btrfs: zoned: fix zone_unusable accounting on making block group read-write again btrfs: do not subtract delalloc from avail bytes btrfs: make cow_file_range_inline() honor locked_page on error btrfs: fix corrupt read due to bad offset of a compressed extent map btrfs: tree-checker: validate dref root and objectid |
||
|
Tejun Heo
|
c8faf11cd1 |
Linux 6.11-rc1
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmamtfseHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGC20H/j6G3+7gYGDtSsl9 5eH7UFzk18JeIG4c9Z5q9p2YVqdTggHOyWUA0qYBJWLyjpQa0q5SO+Qf2VwH8bH7 NpHZQYIdRB6dy/MySZII/6KdOJobz779P8EOPVdPs6PaAmiwOwzdK4aHxhi3iQJv 8QHmswjnT6t44p7WX1gZCUL2R3TL5hyA505BfPBz5OPBLkuuTArCBO8mZfTvk3R6 fskKrVBC3oEb9Vgx/bycah9wTJn4ptPUGggaTnbu44RkhZcHfMiciqOrtMtYtqKx fmGQllbVQ8CHp4IBZ5nYfUB4E04Zg+XqNeYHa0T9R97e7crZ5iMKutujydmnhqA0 r3Ca53w= =R3sl -----END PGP SIGNATURE----- Merge tag 'v6.11-rc1' into for-6.12 Linux 6.11-rc1 |
||
|
Matthieu Baerts (NGI0)
|
b6a66e521a |
mptcp: sched: check both directions for backup
The 'mptcp_subflow_context' structure has two items related to the
backup flags:
- 'backup': the subflow has been marked as backup by the other peer
- 'request_bkup': the backup flag has been set by the host
Before this patch, the scheduler was only looking at the 'backup' flag.
That can make sense in some cases, but it looks like that's not what we
wanted for the general use, because either the path-manager was setting
both of them when sending an MP_PRIO, or the receiver was duplicating
the 'backup' flag in the subflow request.
Note that the use of these two flags in the path-manager are going to be
fixed in the next commits, but this change here is needed not to modify
the behaviour.
Fixes:
|
||
|
Naohiro Aota
|
8cd44dd1d1 |
btrfs: zoned: fix zone_unusable accounting on making block group read-write again
When btrfs makes a block group read-only, it adds all free regions in the
block group to space_info->bytes_readonly. That free space excludes
reserved and pinned regions. OTOH, when btrfs makes the block group
read-write again, it moves all the unused regions into the block group's
zone_unusable. That unused region includes reserved and pinned regions.
As a result, it counts too much zone_unusable bytes.
Fortunately (or unfortunately), having erroneous zone_unusable does not
affect the calculation of space_info->bytes_readonly, because free
space (num_bytes in btrfs_dec_block_group_ro) calculation is done based on
the erroneous zone_unusable and it reduces the num_bytes just to cancel the
error.
This behavior can be easily discovered by adding a WARN_ON to check e.g,
"bg->pinned > 0" in btrfs_dec_block_group_ro(), and running fstests test
case like btrfs/282.
Fix it by properly considering pinned and reserved in
btrfs_dec_block_group_ro(). Also, add a WARN_ON and introduce
btrfs_space_info_update_bytes_zone_unusable() to catch a similar mistake.
Fixes:
|
||
|
Linus Torvalds
|
5256184b61 |
Fixes and minor updates for the timer migration code:
- Stop testing the group->parent pointer as it is not guaranteed to be
stable over a chain of operations by design. This includes a warning
which would be nice to have but it produces false positives due to
the racy nature of the check.
- Plug a race between CPUs going in and out of idle and a CPU hotplug
operation. The latter can create and connect a new hierarchy level
which is missed in the concurrent updates of CPUs which go into idle.
As a result the events of such a CPU might not be processed and
timers go stale.
Cure it by splitting the hotplug operation into a prepare and online
callback. The prepare callback is guaranteed to run on an online and
therefore active CPU. This CPU updates the hierarchy and being online
ensures that there is always at least one migrator active which
handles the modified hierarchy correctly when going idle. The online
callback which runs on the incoming CPU then just marks the CPU
active and brings it into operation.
- Improve tracing and polish the code further so it is more obvious
what's going on.
-----BEGIN PGP SIGNATURE-----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=G1Lg
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer migration updates from Thomas Gleixner:
"Fixes and minor updates for the timer migration code:
- Stop testing the group->parent pointer as it is not guaranteed to
be stable over a chain of operations by design.
This includes a warning which would be nice to have but it produces
false positives due to the racy nature of the check.
- Plug a race between CPUs going in and out of idle and a CPU hotplug
operation. The latter can create and connect a new hierarchy level
which is missed in the concurrent updates of CPUs which go into
idle. As a result the events of such a CPU might not be processed
and timers go stale.
Cure it by splitting the hotplug operation into a prepare and
online callback. The prepare callback is guaranteed to run on an
online and therefore active CPU. This CPU updates the hierarchy and
being online ensures that there is always at least one migrator
active which handles the modified hierarchy correctly when going
idle. The online callback which runs on the incoming CPU then just
marks the CPU active and brings it into operation.
- Improve tracing and polish the code further so it is more obvious
what's going on"
* tag 'timers-urgent-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix grammar in comment
timers/migration: Spare write when nothing changed
timers/migration: Rename childmask by groupmask to make naming more obvious
timers/migration: Read childmask and parent pointer in a single place
timers/migration: Use a single struct for hierarchy walk data
timers/migration: Improve tracing
timers/migration: Move hierarchy setup into cpuhotplug prepare callback
timers/migration: Do not rely always on group->parent
|
||
|
Linus Torvalds
|
7a3fad30fd |
Random number generator updates for Linux 6.11-rc1.
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmaarzgACgkQSfxwEqXe A66ZWBAAlhXx8bve0uKlDRK8fffWHgruho/fOY4lZJ137AKwA9JCtmOyqdfL4Dmk VxFe7pEQJlQhcA/6kH54uO7SBXwfKlKZJth6SYnaCRMUIbFifHjjIQ0QqldjEKi0 rP90Hu4FVsbwQC7u9i9lQj9n2P36zb6pn83BzpZQ/2PtoVCSCrdSJUe0Rxa3H3GN 0+nNkDSXQt5otCByLaeE3x7KJgXLWL9+G2eFSFLTZ8rSVfMx1CdOIAG37WlLGdWm BaFYPDKMyBTVvVJBNgAe9YSqtrsZ5nlmLz+Z9wAe/hTL7RlL03kWUu34/Udcpull zzMDH0WMntiGK3eFQ2gOYSWqypvAjwHgn3BzqNmjUb69+89mZsdU1slcvnxWsUwU D3vphrscaqarF629tfsXti3jc5PoXwUTjROZVcCyeFPBhyAZgzK8xUvPpJO+RT+K EuUABob9cpA6FCpW/QeolDmMDhXlNT8QgsZu1juokZac2xP3Ly3REyEvT7HLbU2W ZJjbEqm1ppp3RmGELUOJbyhwsLrnbt+OMDO7iEWoG8aSFK4diBK/ZM6WvLMkr8Oi 7ioXGIsYkCy3c47wpZKTrAapOPJp5keqNAiHSEbXw8mozp6429QAEZxNOcczgHKC Ea2JzRkctqutcIT+Slw/uUe//i1iSsIHXbE81fp5udcQTJcUByo= =P8aI -----END PGP SIGNATURE----- Merge tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: "This adds getrandom() support to the vDSO. First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which lets the kernel zero out pages anytime under memory pressure, which enables allocating memory that never gets swapped to disk but also doesn't count as being mlocked. Then, the vDSO implementation of getrandom() is introduced in a generic manner and hooked into random.c. Next, this is implemented on x86. (Also, though it's not ready for this pull, somebody has begun an arm64 implementation already) Finally, two vDSO selftests are added. There are also two housekeeping cleanup commits" * tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: MAINTAINERS: add random.h headers to RNG subsection random: note that RNDGETPOOL was removed in 2.6.9-rc2 selftests/vDSO: add tests for vgetrandom x86: vdso: Wire up getrandom() vDSO implementation random: introduce generic vDSO getrandom() implementation mm: add MAP_DROPPABLE for designating always lazily freeable mappings |
||
|
Anna-Maria Behnsen
|
835a9a67f5 |
timers/migration: Rename childmask by groupmask to make naming more obvious
childmask in the group reflects the mask that is required to 'reference' this group in the parent. When reading childmask, this might be confusing, as this suggests, that this is the mask of the child of the group. Clarify this by renaming childmask in the tmigr_group and tmc_group by groupmask. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20240716-tmigr-fixes-v4-6-757baa7803fe@linutronix.de |
||
|
Linus Torvalds
|
fbc90c042c |
- 875fa64577da ("mm/hugetlb_vmemmap: fix race with speculative PFN
walkers") is known to cause a performance regression (https://lore.kernel.org/all/3acefad9-96e5-4681-8014-827d6be71c7a@linux.ibm.com/T/#mfa809800a7862fb5bdf834c6f71a3a5113eb83ff). Yu has a fix which I'll send along later via the hotfixes branch. - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Is anyone reading this stuff? If so, email me! - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2C+QAKCRDdBJ7gKXxA joTkAQDvjqOoFStqk4GU3OXMYB7WCU/ZQMFG0iuu1EEwTVDZ4QEA8CnG7seek1R3 xEoo+vw0sWWeLV3qzsxnCA1BJ8cTJA8= =z0Lf -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ... |
||
|
Linus Torvalds
|
8326f5e1a4 |
firewire updates for v6.11
There are many line changes for FireWire subsystem, while there is no functional change for practical use. The most of changes are for code refactoring, some KUnit tests to added helper functions, and new tracepoints events for both the core functions and 1394 OHCI driver. The tracepoints events now cover the verbose logging enabled by debug parameter of firewire-ohci kernel module. The parameter would be removed in any future timing, thus it is now deprecated. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZptYCwAKCRCsLtaWM8Lw E169AQCAR9DZxgflPH03bW8ftfS0crwqdYTUpRYIkwBIXzYl4AD+O2bOB28Xn+U+ W4Inye792FjBCRtStp7PsJyhdVYBUws= =uFe6 -----END PGP SIGNATURE----- Merge tag 'firewire-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Takashi Sakamoto: "There are many lines of changes for FireWire subsystem, but there is practically no functional change. Most of the changes are for code refactoring, some KUnit tests to added helper functions, and new tracepoints events for both the core functions and 1394 OHCI driver. The tracepoints events now cover the verbose logging enabled by debug parameter of firewire-ohci kernel module. The parameter would be removed in any future timing, thus it is now deprecated" * tag 'firewire-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (32 commits) firewire: core: move copy_port_status() helper function to TP_fast_assign() block Revert "firewire: ohci: use common macro to interpret be32 data in le32 buffer" firewire: ohci: add tracepoints event for data of Self-ID DMA firewire: ohci: use inline functions to operate data of self-ID DMA firewire: ohci: add static inline functions to deserialize for Self-ID DMA operation firewire: ohci: use static function to handle endian issue on PowerPC platform firewire: ohci: use common macro to interpret be32 data in le32 buffer firewire: core: Fix spelling mistakes in tracepoint messages firewire: ohci: add tracepoints event for hardIRQ event firewire: ohci: add support for Linux kernel tracepoints firewire: core: add tracepoints events for completions of packets in isochronous context firewire: core: add tracepoints events for queueing packets of isochronous context firewire: core: add tracepoints events for flushing completions of isochronous context firewire: core: add tracepoints events for flushing of isochronous context firewire: core: add tracepoints events for starting/stopping of isochronous context firewire: core: add tracepoints events for setting channels of multichannel context firewire: core: add tracepoints events for allocation/deallocation of isochronous context firewire: core: undefine macros after use in tracepoints events firewire: core: record card index in tracepoints event for self ID sequence firewire: core: use inline helper functions to serialize phy config packet ... |
||
|
Jason A. Donenfeld
|
9651fcedf7 |
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
The vDSO getrandom() implementation works with a buffer allocated with a
new system call that has certain requirements:
- It shouldn't be written to core dumps.
* Easy: VM_DONTDUMP.
- It should be zeroed on fork.
* Easy: VM_WIPEONFORK.
- It shouldn't be written to swap.
* Uh-oh: mlock is rlimited.
* Uh-oh: mlock isn't inherited by forks.
- It shouldn't reserve actual memory, but it also shouldn't crash when
page faulting in memory if none is available
* Uh-oh: VM_NORESERVE means segfaults.
It turns out that the vDSO getrandom() function has three really nice
characteristics that we can exploit to solve this problem:
1) Due to being wiped during fork(), the vDSO code is already robust to
having the contents of the pages it reads zeroed out midway through
the function's execution.
2) In the absolute worst case of whatever contingency we're coding for,
we have the option to fallback to the getrandom() syscall, and
everything is fine.
3) The buffers the function uses are only ever useful for a maximum of
60 seconds -- a sort of cache, rather than a long term allocation.
These characteristics mean that we can introduce VM_DROPPABLE, which
has the following semantics:
a) It never is written out to swap.
b) Under memory pressure, mm can just drop the pages (so that they're
zero when read back again).
c) It is inherited by fork.
d) It doesn't count against the mlock budget, since nothing is locked.
e) If there's not enough memory to service a page fault, it's not fatal,
and no signal is sent.
This way, allocations used by vDSO getrandom() can use:
VM_DROPPABLE | VM_DONTDUMP | VM_WIPEONFORK | VM_NORESERVE
And there will be no problem with OOMing, crashing on overcommitment,
using memory when not in use, not wiping on fork(), coredumps, or
writing out to swap.
In order to let vDSO getrandom() use this, expose these via mmap(2) as
MAP_DROPPABLE.
Note that this involves removing the MADV_FREE special case from
sort_folio(), which according to Yu Zhao is unnecessary and will simply
result in an extra call to shrink_folio_list() in the worst case. The
chunk removed reenables the swapbacked flag, which we don't want for
VM_DROPPABLE, and we can't conditionalize it here because there isn't a
vma reference available.
Finally, the provided self test ensures that this is working as desired.
Cc: linux-mm@kvack.org
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
||
|
Linus Torvalds
|
4f40c636b2 |
NFS Client Updates for Linux 6.11
New Features:
* Add support for large folios
* Implement rpcrdma generic device removal notification
* Add client support for attribute delegations
* Use a LAYOUTRETURN during reboot recovery to report layoutstats and errors
* Improve throughput for random buffered writes
* Add NVMe support to pnfs/blocklayout
Bugfixes:
* Fix rpcrdma_reqs_reset()
* Avoid soft lockups when using UDP
* Fix an nfs/blocklayout premature PR key unregestration
* Another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
* Do not extend writes to the entire folio
* Pass explicit offset and count values to tracepoints
* Fix a race to wake up sleeping SUNRPC sync tasks
* Fix gss_status tracepoint output
Cleanups:
* Add missing MODULE_DESCRIPTION() macros
* Add blocklayout / SCSI layout tracepoints
* Remove asm-generic headers from xprtrdma verbs.c
* Remove unused 'struct mnt_fhstatus'
* Other delegation related cleanups
* Other folio related cleanups
* Other pNFS related cleanups
* Other xprtrdma cleanups
-----BEGIN PGP SIGNATURE-----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=avTW
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add support for large folios
- Implement rpcrdma generic device removal notification
- Add client support for attribute delegations
- Use a LAYOUTRETURN during reboot recovery to report layoutstats
and errors
- Improve throughput for random buffered writes
- Add NVMe support to pnfs/blocklayout
Bugfixes:
- Fix rpcrdma_reqs_reset()
- Avoid soft lockups when using UDP
- Fix an nfs/blocklayout premature PR key unregestration
- Another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
- Do not extend writes to the entire folio
- Pass explicit offset and count values to tracepoints
- Fix a race to wake up sleeping SUNRPC sync tasks
- Fix gss_status tracepoint output
Cleanups:
- Add missing MODULE_DESCRIPTION() macros
- Add blocklayout / SCSI layout tracepoints
- Remove asm-generic headers from xprtrdma verbs.c
- Remove unused 'struct mnt_fhstatus'
- Other delegation related cleanups
- Other folio related cleanups
- Other pNFS related cleanups
- Other xprtrdma cleanups"
* tag 'nfs-for-6.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits)
SUNRPC: Fixup gss_status tracepoint error output
SUNRPC: Fix a race to wake a sync task
nfs: split nfs_read_folio
nfs: pass explicit offset/count to trace events
nfs: do not extend writes to the entire folio
nfs/blocklayout: add support for NVMe
nfs: remove nfs_page_length
nfs: remove the unused max_deviceinfo_size field from struct pnfs_layoutdriver_type
nfs: don't reuse partially completed requests in nfs_lock_and_join_requests
nfs: move nfs_wait_on_request to write.c
nfs: fold nfs_page_group_lock_subrequests into nfs_lock_and_join_requests
nfs: fold nfs_folio_find_and_lock_request into nfs_lock_and_join_requests
nfs: simplify nfs_folio_find_and_lock_request
nfs: remove nfs_folio_private_request
nfs: remove dead code for the old swap over NFS implementation
NFSv4.1 another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
nfs: Block on write congestion
nfs: Properly initialize server->writeback
nfs: Drop pointless check from nfs_commit_release_pages()
nfs/blocklayout: SCSI layout trace points for reservation key reg/unreg
...
|
||
|
Linus Torvalds
|
51ed42a8a1 |
Many cleanups and bug fixes in ext4, especially for the fast commit
feature. Also some performance improvements; in particular, improving IOPS and throughput on fast devices running Async Direct I/O by up to 20% by optimizing jbd2_transaction_committed(). -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmaYiqsACgkQ8vlZVpUN gaOWpQf/d6Y9WGyjeC1jOc+vIBxLgL+X0kbzYkkjGTSIZ7mZJS9X4NMMEtqayJ4f 1zGobcGENc05l4LVxf3uMbDj1aGlHeI9X4GLGaP5s5NcaAl4HKjQ3aFs3MuiJHPj Ol2CebXJx+NKt1lkD8PSPGgaTb5zg+SeZifI+OZ1RpkcKmGnkSNa5NkUNAaBh6dl 5LLXTc2p9NcCwAwDAQSiAJCV35bAZpcp6fwLLaPQ6Eok9HxGcJuYXW2Fict4rbtV mXeogXVIo2bkMcfh6tDchDBrFvORYIA7uBVmaG1LgAMrtEnYxnxnEntD0h6j/bzF Fl4jjQfd8o2uYto/4eo+iY6Z0haxyQ== =rcOo -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Many cleanups and bug fixes in ext4, especially for the fast commit feature. Also some performance improvements; in particular, improving IOPS and throughput on fast devices running Async Direct I/O by up to 20% by optimizing jbd2_transaction_committed()" * tag 'ext4_for_linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits) ext4: make sure the first directory block is not a hole ext4: check dot and dotdot of dx_root before making dir indexed ext4: sanity check for NULL pointer after ext4_force_shutdown jbd2: increase maximum transaction size jbd2: drop pointless shrinker batch initialization jbd2: avoid infinite transaction commit loop jbd2: precompute number of transaction descriptor blocks jbd2: make jbd2_journal_get_max_txn_bufs() internal jbd2: avoid mount failed when commit block is partial submitted ext4: avoid writing unitialized memory to disk in EA inodes ext4: don't track ranges in fast_commit if inode has inlined data ext4: fix possible tid_t sequence overflows ext4: use ext4_update_inode_fsync_trans() helper in inode creation ext4: add missing MODULE_DESCRIPTION() jbd2: add missing MODULE_DESCRIPTION() ext4: use memtostr_pad() for s_volume_name jbd2: speed up jbd2_transaction_committed() ext4: make ext4_da_map_blocks() buffer_head unaware ext4: make ext4_insert_delayed_block() insert multi-blocks ext4: factor out a helper to check the cluster allocation state ... |
||
|
Linus Torvalds
|
2fd4130e53 |
tracing: Trivial updates for 6.11
- Set rtla/osnoise default threshold to 1us from 5us
The 5us default was missing noise that people cared about.
Changing it to 1us makes it work as expected.
- Restructure how sched_switch prev_comm and next_comm was being saved.
The prev_comm was being saved along with the other next fields, and the
next_comm was being saved along with the other prev fields. This is just
a cosmetic change.
- Have the allocation of pid_list use GFP_NOWAIT instead of GFP_KERNEL.
The allocation can happen in irq_work context, but luckily, the size
was by default so large, it was never triggered. But in case it ever is,
use the NOWAIT allocation in the interrupt context.
- Fix some kernel doc errors.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbRchQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qt9qAQCM/FNa1mRRlnCxMD+SrcGJmW4j/VvE
5c+QY5ezCYxGjwEA5tYwXttoZ1WHGRWCvuRSnkWidE1K0HpRyITo3BVzaQU=
=Sw4T
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"Trivial updates for 6.11:
- Set rtla/osnoise default threshold to 1us from 5us
The 5us default was missing noise that people cared about. Changing
it to 1us makes it work as expected.
- Restructure how sched_switch prev_comm and next_comm was being saved
The prev_comm was being saved along with the other next fields, and
the next_comm was being saved along with the other prev fields.
This is just a cosmetic change.
- Have the allocation of pid_list use GFP_NOWAIT instead of GFP_KERNEL
The allocation can happen in irq_work context, but luckily, the
size was by default so large, it was never triggered. But in case
it ever is, use the NOWAIT allocation in the interrupt context.
- Fix some kernel doc errors"
* tag 'trace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
trace/pid_list: Change gfp flags in pid_list_fill_irq()
tracing/sched: sched_switch: place prev_comm and next_comm in right order
rtla/osnoise: set the default threshold to 1us
tracing: Fix trace_pid_list_free() kernel-doc
|
||
|
Benjamin Coddington
|
b9fae9f06d |
SUNRPC: Fixup gss_status tracepoint error output
The GSS routine errors are values, not flags.
Fixes:
|
||
|
Linus Torvalds
|
a1b547f0f2 |
for-6.11-tag
-----BEGIN PGP SIGNATURE-----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=k5d3
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The highlights are new logic behind background block group reclaim,
automatic removal of qgroup after removing a subvolume and new
'rescue=' mount options.
The rest is optimizations, cleanups and refactoring.
User visible features:
- dynamic block group reclaim:
- tunable framework to avoid situations where eager data
allocations prevent creating new metadata chunks due to lack of
unallocated space
- reuse sysfs knob bg_reclaim_threshold (otherwise used only in
zoned mode) for a fixed value threshold
- new on/off sysfs knob "dynamic_reclaim" calculating the value
based on heuristics, aiming to keep spare working space for
relocating chunks but not to needlessly relocate partially
utilized block groups or reclaim newly allocated ones
- stats are exported in sysfs per block group type, files
"reclaim_*"
- this may increase IO load at unexpected times but the corner
case of no allocatable block groups is known to be worse
- automatically remove qgroup of deleted subvolumes:
- adjust qgroup removal conditions, make sure all related
subvolume data are already removed, or return EBUSY, also take
into account setting of sysfs drop_subtree_threshold
- also works in squota mode
- mount option updates: new modes of 'rescue=' that allow to mount
images (read-only) that could have been partially converted by user
space tools
- ignoremetacsums - invalid metadata checksums are ignored
- ignoresuperflags - super block flags that track conversion in
progress (like UUID or checksums)
Core:
- size of struct btrfs_inode is now below 1024 (on a release config),
improved memory packing and other secondary effects
- switch tracking of open inodes from rb-tree to xarray, minor
performance improvement
- reduce number of empty transaction commits when there are no dirty
data/metadata
- memory allocation optimizations (reduced numbers, reordering out of
critical sections)
- extent map structure optimizations and refactoring, more sanity
checks
- more subpage in zoned mode preparations or fixes
- general snapshot code cleanups, improvements and documentation
- tree-checker updates: more file extent ram_bytes fixes, continued
- raid-stripe-tree update (not backward compatible):
- remove extent encoding field from the structure, can be inferred
from other information
- requires btrfs-progs 6.9.1 or newer
- cleanups and refactoring
- error message updates
- error handling improvements
- return type and parameter cleanups and improvements"
* tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (152 commits)
btrfs: fix extent map use-after-free when adding pages to compressed bio
btrfs: fix bitmap leak when loading free space cache on duplicate entry
btrfs: remove the BUG_ON() inside extent_range_clear_dirty_for_io()
btrfs: move extent_range_clear_dirty_for_io() into inode.c
btrfs: enhance compression error messages
btrfs: fix data race when accessing the last_trans field of a root
btrfs: rename the extra_gfp parameter of btrfs_alloc_page_array()
btrfs: remove the extra_gfp parameter from btrfs_alloc_folio_array()
btrfs: introduce new "rescue=ignoresuperflags" mount option
btrfs: introduce new "rescue=ignoremetacsums" mount option
btrfs: output the unrecognized super block flags as hex
btrfs: remove unused Opt enums
btrfs: tree-checker: add extra ram_bytes and disk_num_bytes check
btrfs: fix the ram_bytes assignment for truncated ordered extents
btrfs: make validate_extent_map() catch ram_bytes mismatch
btrfs: ignore incorrect btrfs_file_extent_item::ram_bytes
btrfs: cleanup the bytenr usage inside btrfs_extent_item_to_extent_map()
btrfs: fix typo in error message in btrfs_validate_super()
btrfs: move the direct IO code into its own file
btrfs: pass a btrfs_inode to btrfs_set_prop()
...
|
||
|
Linus Torvalds
|
586f14a6a1 |
Changes since last update:
- More folio conversions for compressed inodes;
- Stream decompressor (LZMA/DEFLATE/ZSTD) cleanups;
- Minor tracepoint cleanup.
-----BEGIN PGP SIGNATURE-----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=LxxN
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"Updates for folio conversions for compressed inodes: While large folio
support for compressed data could work now, it remains disabled since
the stress test could hang due to page migration in a few hours after
enabling it. I need more time to investigate further before enabling
this feature.
Additionally, clean up stream decompressors and tracepoints for
simplicity.
Summary:
- More folio conversions for compressed inodes
- Stream decompressor (LZMA/DEFLATE/ZSTD) cleanups
- Minor tracepoint cleanup"
* tag 'erofs-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: silence uninitialized variable warning in z_erofs_scan_folio()
erofs: avoid refcounting short-lived pages
erofs: get rid of z_erofs_map_blocks_iter_* tracepoints
erofs: tidy up stream decompressors
erofs: refine z_erofs_{init,exit}_subsystem()
erofs: move each decompressor to its own source file
erofs: tidy up `struct z_erofs_bvec`
erofs: teach z_erofs_scan_folios() to handle multi-page folios
erofs: convert z_erofs_read_fragment() to folios
erofs: convert z_erofs_pcluster_readmore() to folios
|
||
|
Linus Torvalds
|
51835949dd |
Networking changes for 6.11. Not much excitement - a handful of large
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmaWjBwACgkQMUZtbf5S
IrvuSRAAkJuEzTRqgURBCe4eNEQde6mJJig7l2CKHwCbFiHZpRkFHf8qKbcGWbL6
uLW33SWnKtJVDhxVKWHLq635XW7BAa80YhqGw21GDi+mIEhWXZglHj3xbXNxsMfE
4eg/kG4BkfYWFmHaXOwVWV/mr7nXf6j7WmXNeXEi32ufE1j0OL+YlQenKnMj8yP2
j9JmYa2Chwppng1SblHmcjmGkdNVwFhStKeCG+2K7v06wdDH/QYBlbgUv9gw/cxp
NlW//wgiaeX40U4O3kDwt9C+LDoh+0VrDDeVdQ+IsScLtY3PhAzEoKolFYTq2HSr
I1JpoaHNnyNsJq3DZrACQ5WlH4yDn6C2EUB6dxNnFaI9F1ZPsi+7MTl6Sei1AklD
TuQTj/lxOACBwW2Q77NU72uoxiIUauesGPHcnrAFuoCIEhZF0mso7k59BvrXhsOP
QwcLbQdc1YHNkqv/Vc7NBY+ruMsYB+5Ubbhhj2p27dp/CWFIwxI29fze4dn2uhO6
ejHN3mbqwPdSzg12YJtM6Iq61Cnwo2eVSvhTxl+ZVSZtI4nu2arzR+y7QTYmNrXP
6tkgVN9UsWeLl2xJ8wyyqL5mcvNHP2rPXWZ2X56iTaa26m+UlleeQ7YRaYtQAAr0
Ec/vlDMX64SwHhd+qwE99DXGQf2g+KklHKSLsnajJUVrWFTlRI0=
=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
||
|
Linus Torvalds
|
3e78198862 |
for-6.11/block-20240710
-----BEGIN PGP SIGNATURE-----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=wVi8
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
|
||
|
Tio Zhang
|
a325742505 |
tracing/sched: sched_switch: place prev_comm and next_comm in right order
Switch the order of prev_comm and next_comm in sched_switch's code to align with its printing order. Cc: <mhiramat@kernel.org> Signed-off-by: Tio Zhang <tiozhang@didiglobal.com> Link: https://lore.kernel.org/20240703033353.GA2833@didi-ThinkCentre-M930t-N000 Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Jakub Kicinski
|
e5abd12f3d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c |
||
|
Linus Torvalds
|
975f3b6da1 |
for-6.10-rc7-tag
-----BEGIN PGP SIGNATURE-----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=gtsF
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fix a regression in extent map shrinker behaviour.
In the past weeks we got reports from users that there are huge
latency spikes or freezes. This was bisected to newly added shrinker
of extent maps (it was added to fix a build up of the structures in
memory).
I'm assuming that the freezes would happen to many users after release
so I'd like to get it merged now so it's in 6.10. Although the diff
size is not small the changes are relatively straightforward, the
reporters verified the fixes and we did testing on our side.
The fixes:
- adjust behaviour under memory pressure and check lock or scheduling
conditions, bail out if needed
- synchronize tracking of the scanning progress so inode ranges are
not skipped or work duplicated
- do a delayed iput when scanning a root so evicting an inode does
not slow things down in case of lots of dirty data, also fix
lockdep warning, a deadlock could happen when writing the dirty
data would need to start a transaction"
* tag 'for-6.10-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid races when tracking progress for extent map shrinking
btrfs: stop extent map shrinker if reschedule is needed
btrfs: use delayed iput during extent map shrinking
|
||
|
Takashi Sakamoto
|
06dcc4c9ba |
firewire: core: move copy_port_status() helper function to TP_fast_assign() block
It would be possible to put any statement in TP_fast_assign(). This commit obsoletes the helper function and put its statements to TP_fast_assign() for the code simplicity. Link: https://lore.kernel.org/r/20240712003010.87341-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Jakub Kicinski
|
7c8267275d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: net/sched/act_ct.c |
||
|
Filipe Manana
|
4484940514 |
btrfs: avoid races when tracking progress for extent map shrinking
We store the progress (root and inode numbers) of the extent map shrinker in fs_info without any synchronization but we can have multiple tasks calling into the shrinker during memory allocations when there's enough memory pressure for example. This can result in a task A reading fs_info->extent_map_shrinker_last_ino after another task B updates it, and task A reading fs_info->extent_map_shrinker_last_root before task B updates it, making task A see an odd state that isn't necessarily harmful but may make it skip certain inode ranges or do more work than necessary by going over the same inodes again. These unprotected accesses would also trigger warnings from tools like KCSAN. So add a lock to protect access to these progress fields. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
c77a8c6100 |
btrfs: remove extent_map::block_start member
The member extent_map::block_start can be calculated from extent_map::disk_bytenr + extent_map::offset for regular extents. And otherwise just extent_map::disk_bytenr. And this is already validated by the validate_extent_map(). Now we can remove the member. However there is a special case in btrfs_create_dio_extent() where we for NOCOW/PREALLOC ordered extents cannot directly use the resulting btrfs_file_extent, as btrfs_split_ordered_extent() cannot handle them yet. So for that call site, we pass file_extent->disk_bytenr + file_extent->num_bytes as disk_bytenr for the ordered extent, and 0 for offset. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
e28b851ed9 |
btrfs: remove extent_map::block_len member
The extent_map::block_len is either extent_map::len (non-compressed extent) or extent_map::disk_num_bytes (compressed extent). Since we already have sanity checks to do the cross-checks between the new and old members, we can drop the old extent_map::block_len now. For most call sites, they can manually select extent_map::len or extent_map::disk_num_bytes, since most if not all of them have checked if the extent is compressed. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
4aa7b5d178 |
btrfs: remove extent_map::orig_start member
Since we have extent_map::offset, the old extent_map::orig_start is just extent_map::start - extent_map::offset for non-hole/inline extents. And since the new extent_map::offset is already verified by validate_extent_map() while the old orig_start is not, let's just remove the old member from all call sites. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Johannes Weiner
|
3a3b7fec39 |
mm: remove CONFIG_MEMCG_KMEM
CONFIG_MEMCG_KMEM used to be a user-visible option for whether slab tracking is enabled. It has been default-enabled and equivalent to CONFIG_MEMCG for almost a decade. We've only grown more kernel memory accounting sites since, and there is no imaginable cgroup usecase going forward that wants to track user pages but not the multitude of user-drivable kernel allocations. Link: https://lkml.kernel.org/r/20240701153148.452230-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: David Hildenbrand <david@redhat.com> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Hongzhen Luo
|
1c076f1f4d |
erofs: get rid of z_erofs_map_blocks_iter_* tracepoints
Consolidate them under erofs_map_blocks_* for simplicity since we have many other ways to know if a given inode is compressed or not. Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20240710083459.208362-1-hongzhen@linux.alibaba.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> |
||
|
Chuck Lever
|
3f4eb9ff92 |
xprtrdma: Handle device removal outside of the CM event handler
Wait for all disconnects to complete to ensure the transport has divested all of its hardware resources before the underlying RDMA device can be removed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> |
||
|
Chuck Lever
|
7e86845a03 |
rpcrdma: Implement generic device removal
Commit
|
||
|
Christian Brauner
|
eeb17984e8
|
Merge patch series "cachefiles: random bugfixes"
libaokun@huaweicloud.com <libaokun@huaweicloud.com> says: This is the third version of this patch series, in which another patch set is subsumed into this one to avoid confusing the two patch sets. (https://patchwork.kernel.org/project/linux-fsdevel/list/?series=854914) We've been testing ondemand mode for cachefiles since January, and we're almost done. We hit a lot of issues during the testing period, and this patch series fixes some of the issues. The patches have passed internal testing without regression. The following is a brief overview of the patches, see the patches for more details. Patch 1-2: Add fscache_try_get_volume() helper function to avoid fscache_volume use-after-free on cache withdrawal. Patch 3: Fix cachefiles_lookup_cookie() and cachefiles_withdraw_cache() concurrency causing cachefiles_volume use-after-free. Patch 4: Propagate error codes returned by vfs_getxattr() to avoid endless loops. Patch 5-7: A read request waiting for reopen could be closed maliciously before the reopen worker is executing or waiting to be scheduled. So ondemand_object_worker() may be called after the info and object and even the cache have been freed and trigger use-after-free. So use cancel_work_sync() in cachefiles_ondemand_clean_object() to cancel the reopen worker or wait for it to finish. Since it makes no sense to wait for the daemon to complete the reopen request, to avoid this pointless operation blocking cancel_work_sync(), Patch 1 avoids request generation by the DROPPING state when the request has not been sent, and Patch 2 flushes the requests of the current object before cancel_work_sync(). Patch 8: Cyclic allocation of msg_id to avoid msg_id reuse misleading the daemon to cause hung. Patch 9: Hold xas_lock during polling to avoid dereferencing reqs causing use-after-free. This issue was triggered frequently in our tests, and we found that anolis 5.10 had fixed it. So to avoid failing the test, this patch is pushed upstream as well. Baokun Li (7): netfs, fscache: export fscache_put_volume() and add fscache_try_get_volume() cachefiles: fix slab-use-after-free in fscache_withdraw_volume() cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie() cachefiles: propagate errors from vfs_getxattr() to avoid infinite loop cachefiles: stop sending new request when dropping object cachefiles: cancel all requests for the object that is being dropped cachefiles: cyclic allocation of msg_id to avoid reuse Hou Tao (1): cachefiles: wait for ondemand_object_worker to finish when dropping object Jingbo Xu (1): cachefiles: add missing lock protection when polling fs/cachefiles/cache.c | 45 ++++++++++++++++++++++++++++- fs/cachefiles/daemon.c | 4 +-- fs/cachefiles/internal.h | 3 ++ fs/cachefiles/ondemand.c | 52 ++++++++++++++++++++++++++++++---- fs/cachefiles/volume.c | 1 - fs/cachefiles/xattr.c | 5 +++- fs/netfs/fscache_volume.c | 14 +++++++++ fs/netfs/internal.h | 2 -- include/linux/fscache-cache.h | 6 ++++ include/trace/events/fscache.h | 4 +++ 10 files changed, 123 insertions(+), 13 deletions(-) Link: https://lore.kernel.org/r/20240628062930.2467993-1-libaokun@huaweicloud.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Honggyu Kim
|
ced816a76b |
mm/migrate: add MR_DAMON to migrate_reason
The current patch series introduces DAMON based migration across NUMA nodes so it'd be better to have a new migrate_reason in trace events. Link: https://lkml.kernel.org/r/20240614030010.751-5-honggyu.kim@sk.com Signed-off-by: Honggyu Kim <honggyu.kim@sk.com> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Gregory Price <gregory.price@memverge.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Hyeongtak Ji <hyeongtak.ji@sk.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Takashi Sakamoto
|
526e21a2aa |
firewire: ohci: add tracepoints event for data of Self-ID DMA
In 1394 OHCI, the SelfIDComplete event occurs when the hardware has
finished transmitting all of the self ID packets received during the bus
initialization process to the host memory by DMA.
This commit adds a tracepoints event for this event to trace the timing
and packet data of Self-ID DMA. It is the part of following tracepoints
events helpful to debug some events at bus reset; e.g. the issue addressed
at a commit
|
||
|
Baokun Li
|
522018a0de |
cachefiles: fix slab-use-after-free in fscache_withdraw_volume()
We got the following issue in our fault injection stress test:
==================================================================
BUG: KASAN: slab-use-after-free in fscache_withdraw_volume+0x2e1/0x370
Read of size 4 at addr ffff88810680be08 by task ondemand-04-dae/5798
CPU: 0 PID: 5798 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #565
Call Trace:
kasan_check_range+0xf6/0x1b0
fscache_withdraw_volume+0x2e1/0x370
cachefiles_withdraw_volume+0x31/0x50
cachefiles_withdraw_cache+0x3ad/0x900
cachefiles_put_unbind_pincount+0x1f6/0x250
cachefiles_daemon_release+0x13b/0x290
__fput+0x204/0xa00
task_work_run+0x139/0x230
Allocated by task 5820:
__kmalloc+0x1df/0x4b0
fscache_alloc_volume+0x70/0x600
__fscache_acquire_volume+0x1c/0x610
erofs_fscache_register_volume+0x96/0x1a0
erofs_fscache_register_fs+0x49a/0x690
erofs_fc_fill_super+0x6c0/0xcc0
vfs_get_super+0xa9/0x140
vfs_get_tree+0x8e/0x300
do_new_mount+0x28c/0x580
[...]
Freed by task 5820:
kfree+0xf1/0x2c0
fscache_put_volume.part.0+0x5cb/0x9e0
erofs_fscache_unregister_fs+0x157/0x1b0
erofs_kill_sb+0xd9/0x1c0
deactivate_locked_super+0xa3/0x100
vfs_get_super+0x105/0x140
vfs_get_tree+0x8e/0x300
do_new_mount+0x28c/0x580
[...]
==================================================================
Following is the process that triggers the issue:
mount failed | daemon exit
------------------------------------------------------------
deactivate_locked_super cachefiles_daemon_release
erofs_kill_sb
erofs_fscache_unregister_fs
fscache_relinquish_volume
__fscache_relinquish_volume
fscache_put_volume(fscache_volume, fscache_volume_put_relinquish)
zero = __refcount_dec_and_test(&fscache_volume->ref, &ref);
cachefiles_put_unbind_pincount
cachefiles_daemon_unbind
cachefiles_withdraw_cache
cachefiles_withdraw_volumes
list_del_init(&volume->cache_link)
fscache_free_volume(fscache_volume)
cache->ops->free_volume
cachefiles_free_volume
list_del_init(&cachefiles_volume->cache_link);
kfree(fscache_volume)
cachefiles_withdraw_volume
fscache_withdraw_volume
fscache_volume->n_accesses
// fscache_volume UAF !!!
The fscache_volume in cache->volumes must not have been freed yet, but its
reference count may be 0. So use the new fscache_try_get_volume() helper
function try to get its reference count.
If the reference count of fscache_volume is 0, fscache_put_volume() is
freeing it, so wait for it to be removed from cache->volumes.
If its reference count is not 0, call cachefiles_withdraw_volume() with
reference count protection to avoid the above issue.
Fixes:
|
||
|
Mina Almasry
|
4dec64c52e |
page_pool: convert to use netmem
Abstract the memory type from the page_pool so we can later add support for new memory types. Convert the page_pool to use the new netmem type abstraction, rather than use struct page directly. As of this patch the netmem type is a no-op abstraction: it's always a struct page underneath. All the page pool internals are converted to use struct netmem instead of struct page, and the page pool now exports 2 APIs: 1. The existing struct page API. 2. The new struct netmem API. Keeping the existing API is transitional; we do not want to refactor all the current drivers using the page pool at once. The netmem abstraction is currently a no-op. The page_pool uses page_to_netmem() to convert allocated pages to netmem, and uses netmem_to_page() to convert the netmem back to pages to pass to mm APIs, Follow up patches to this series add non-paged netmem support to the page_pool. This change is factored out on its own to limit the code churn to this 1 patch, for ease of code review. Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://patch.msgid.link/20240628003253.1694510-6-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Dongliang Cui
|
aa6ff4eb7c |
block: Add ioprio to block_rq tracepoint
Sometimes we need to track the processing order of requests with ioprio set. So the ioprio of request can be useful information. Example： block_rq_insert: 8,0 RA 16384 () 6500840 + 32 be,0,6 [binder:815_3] block_rq_issue: 8,0 RA 16384 () 6500840 + 32 be,0,6 [binder:815_3] block_rq_complete: 8,0 RA () 6500840 + 32 be,0,6 [0] Signed-off-by: Dongliang Cui <dongliang.cui@unisoc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20240614074936.113659-1-dongliang.cui@unisoc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Colin Ian King
|
502099acb8 |
firewire: core: Fix spelling mistakes in tracepoint messages
There are two spelling mistakes in the tracepoint message text. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240627170847.125531-1-colin.i.king@gmail.com Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Zhang Yi
|
0d66b23d79 |
ext4: make ext4_da_reserve_space() reserve multi-clusters
Add 'nr_resv' parameter to ext4_da_reserve_space(), which indicates the number of clusters wants to reserve, make it reserve multiple clusters at a time. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20240517124005.347221-8-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> |
||
|
Zhang Yi
|
12eba993b9 |
ext4: make ext4_es_insert_delayed_block() insert multi-blocks
Rename ext4_es_insert_delayed_block() to ext4_es_insert_delayed_extent() and pass length parameter to make it insert multiple delalloc blocks at a time. For the case of bigalloc, split the allocated parameter to lclu_allocated and end_allocated. lclu_allocated indicates the allocation state of the cluster which is containing the lblk, end_allocated indicates the allocation state of the extent end, clusters in the middle of delay allocated extent must be unallocated. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20240517124005.347221-7-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> |
||
|
Jakub Kicinski
|
193b9b2002 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: |
||
|
Yunseong Kim
|
bab4923132 |
tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
In the TRACE_EVENT(qdisc_reset) NULL dereference occurred from qdisc->dev_queue->dev <NULL> ->name This situation simulated from bunch of veths and Bluetooth disconnection and reconnection. During qdisc initialization, qdisc was being set to noop_queue. In veth_init_queue, the initial tx_num was reduced back to one, causing the qdisc reset to be called with noop, which led to the kernel panic. I've attached the GitHub gist link that C converted syz-execprogram source code and 3 log of reproduced vmcore-dmesg. https://gist.github.com/yskelg/cc64562873ce249cdd0d5a358b77d740 Yeoreum and I use two fuzzing tool simultaneously. One process with syz-executor : https://github.com/google/syzkaller $ ./syz-execprog -executor=./syz-executor -repeat=1 -sandbox=setuid \ -enable=none -collide=false log1 The other process with perf fuzzer: https://github.com/deater/perf_event_tests/tree/master/fuzzer $ perf_event_tests/fuzzer/perf_fuzzer I think this will happen on the kernel version. Linux kernel version +v6.7.10, +v6.8, +v6.9 and it could happen in v6.10. This occurred from |
||
|
Takashi Sakamoto
|
0d8914165d |
firewire: ohci: add tracepoints event for hardIRQ event
1394 OHCI hardware triggers PCI interrupts to notify any events to software. Current driver for the hardware is programmed by the typical way to utilize top- and bottom- halves, thus it has a timing gap to handle the notification in softIRQ (tasklet). This commit adds a tracepoint event for the hardIRQ event. The comparison of the tracepoint event to tracepoints events in firewire subsystem is helpful to diagnose the timing gap. Link: https://lore.kernel.org/r/20240625031806.956650-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
001c1ff5dc |
firewire: ohci: add support for Linux kernel tracepoints
The Linux Kernel Tracepoints framework is enough useful to trace the interaction between 1394 OHCI hardware and its driver. This commit adds firewire_ohci subsystem to use the framework. It is defined as the different subsystem from the existing firewire subsystem. The definition file for the existing subsystem is slightly changed so that both subsystems are available in 1394 OHCI driver. Link: https://lore.kernel.org/r/20240625031806.956650-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
daf763c2d6 |
firewire: core: add tracepoints events for completions of packets in isochronous context
It is helpful to trace completion of packets in isochronous context when the core function is requested them by both in-kernel units driver and userspace applications. This commit adds some tracepoints events for the aim. Link: https://lore.kernel.org/r/20240623220859.851685-8-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
1f3c0d794d |
firewire: core: add tracepoints events for queueing packets of isochronous context
It is helpful to trace the queueing packets of isochronous context when the core function is requested them by both in-kernel unit drivers and userspace applications. This commit adds some tracepoints events for the aim. Link: https://lore.kernel.org/r/20240623220859.851685-7-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
8320b63e02 |
firewire: core: add tracepoints events for flushing completions of isochronous context
It is helpful to trace the flushing completions of isochronous context when the core function is requested them by both in-kernel unit drivers and userspace applications. This commit adds some tracepoints events for the aim. Link: https://lore.kernel.org/r/20240623220859.851685-6-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
c0b0ce6c47 |
firewire: core: add tracepoints events for flushing of isochronous context
It is helpful to trace the flushing of isochronous context when the core function is requested them by both in-kernel unit drivers and userspace applications. This commit adds some tracepoints events for the aim. Link: https://lore.kernel.org/r/20240623220859.851685-5-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
4e64210f67 |
firewire: core: add tracepoints events for starting/stopping of isochronous context
It is helpful to trace the starting and stopping of isochronous context when the core function is requested them by both in-kernel unit drivers and userspace applications. This commit adds some tracepoints events for the aim. Link: https://lore.kernel.org/r/20240623220859.851685-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
9f16ac725b |
firewire: core: add tracepoints events for setting channels of multichannel context
It is helpful to trace the channel setting for the multichannel isochronous context when the core function is requested it by both in-kernel unit drivers and userspace applications. This commit adds some tracepoints events for the aim. Link: https://lore.kernel.org/r/20240623220859.851685-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
25e6e00d3f |
firewire: core: add tracepoints events for allocation/deallocation of isochronous context
It is helpful to trace the allocation and dealocation of isochronous when the core function is requested them by both in-kernel unit drivers and userspace applications. This commit adds some tracepoints events for the aim. Link: https://lore.kernel.org/r/20240623220859.851685-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
ae24ba769b |
firewire: core: undefine macros after use in tracepoints events
Some macros are defined in tracepoints events. They should be back to undefined state after use. Link: https://lore.kernel.org/r/20240623083900.777897-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
John Garry
|
bf4ae8f2e6 |
scsi: sd: Atomic write support
Support is divided into two main areas: - reading VPD pages and setting sdev request_queue limits - support WRITE ATOMIC (16) command and tracing The relevant block limits VPD page need to be read to allow the block layer request_queue atomic write limits to be set. These VPD page limits are described in sbc4r22 section 6.6.4 - Block limits VPD page. There are five limits of interest: - MAXIMUM ATOMIC TRANSFER LENGTH - ATOMIC ALIGNMENT - ATOMIC TRANSFER LENGTH GRANULARITY - MAXIMUM ATOMIC TRANSFER LENGTH WITH BOUNDARY - MAXIMUM ATOMIC BOUNDARY SIZE MAXIMUM ATOMIC TRANSFER LENGTH is the maximum length for a WRITE ATOMIC (16) command. It will not be greater than the device MAXIMUM TRANSFER LENGTH. ATOMIC ALIGNMENT and ATOMIC TRANSFER LENGTH GRANULARITY are the minimum alignment and length values for an atomic write in terms of logical blocks. Unlike NVMe, SCSI does not specify an LBA space boundary, but does specify a per-IO boundary granularity. The maximum boundary size is specified in MAXIMUM ATOMIC BOUNDARY SIZE. When used, this boundary value is set in the WRITE ATOMIC (16) ATOMIC BOUNDARY field - layout for the WRITE_ATOMIC_16 command can be found in sbc4r22 section 5.48. This boundary value is the granularity size at which the device may atomically write the data. A value of zero in WRITE ATOMIC (16) ATOMIC BOUNDARY field means that all data must be atomically written together. MAXIMUM ATOMIC TRANSFER LENGTH WITH BOUNDARY is the maximum atomic write length if a non-zero boundary value is set. For atomic write support, the WRITE ATOMIC (16) boundary is not of much interest, as the block layer expects each request submitted to be executed atomically. However, the SCSI spec does leave itself open to a quirky scenario where MAXIMUM ATOMIC TRANSFER LENGTH is zero, yet MAXIMUM ATOMIC TRANSFER LENGTH WITH BOUNDARY and MAXIMUM ATOMIC BOUNDARY SIZE are both non-zero. This case will be supported. To set the block layer request_queue atomic write capabilities, sanitize the VPD page limits and set limits as follows: - atomic_write_unit_min is derived from granularity and alignment values. If no granularity value is not set, use physical block size - atomic_write_unit_max is derived from MAXIMUM ATOMIC TRANSFER LENGTH. In the scenario where MAXIMUM ATOMIC TRANSFER LENGTH is zero and boundary limits are non-zero, use MAXIMUM ATOMIC BOUNDARY SIZE for atomic_write_unit_max. New flag scsi_disk.use_atomic_write_boundary is set for this scenario. - atomic_write_boundary_bytes is set to zero always SCSI also supports a WRITE ATOMIC (32) command, which is for type 2 protection enabled. This is not going to be supported now, so check for T10_PI_TYPE2_PROTECTION when setting any request_queue limits. To handle an atomic write request, add support for WRITE ATOMIC (16) command in handler sd_setup_atomic_cmnd(). Flag use_atomic_write_boundary is checked here for encoding ATOMIC BOUNDARY field. Trace info is also added for WRITE_ATOMIC_16 command. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20240620125359.2684798-9-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jakub Kicinski
|
a6ec08beec |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c |
||
|
Yan Zhai
|
c53795d48e |
net: add rx_sk to trace_kfree_skb
skb does not include enough information to find out receiving sockets/services and netns/containers on packet drops. In theory skb->dev tells about netns, but it can get cleared/reused, e.g. by TCP stack for OOO packet lookup. Similarly, skb->sk often identifies a local sender, and tells nothing about a receiver. Allow passing an extra receiving socket to the tracepoint to improve the visibility on receiving drops. Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Tejun Heo
|
07814a9439 |
sched_ext: Print debug dump after an error exit
If a BPF scheduler triggers an error, the scheduler is aborted and the
system is reverted to the built-in scheduler. In the process, a lot of
information which may be useful for figuring out what happened can be lost.
This patch adds debug dump which captures information which may be useful
for debugging including runqueue and runnable thread states at the time of
failure. The following shows a debug dump after triggering the watchdog:
root@test ~# os/work/tools/sched_ext/build/bin/scx_qmap -t 100
stats : enq=1 dsp=0 delta=1 deq=0
stats : enq=90 dsp=90 delta=0 deq=0
stats : enq=156 dsp=156 delta=0 deq=0
stats : enq=218 dsp=218 delta=0 deq=0
stats : enq=255 dsp=255 delta=0 deq=0
stats : enq=271 dsp=271 delta=0 deq=0
stats : enq=284 dsp=284 delta=0 deq=0
stats : enq=293 dsp=293 delta=0 deq=0
DEBUG DUMP
================================================================================
kworker/u32:12[320] triggered exit kind 1026:
runnable task stall (stress[1530] failed to run for 6.841s)
Backtrace:
scx_watchdog_workfn+0x136/0x1c0
process_scheduled_works+0x2b5/0x600
worker_thread+0x269/0x360
kthread+0xeb/0x110
ret_from_fork+0x36/0x40
ret_from_fork_asm+0x1a/0x30
QMAP FIFO[0]:
QMAP FIFO[1]:
QMAP FIFO[2]: 1436
QMAP FIFO[3]:
QMAP FIFO[4]:
CPU states
----------
CPU 0 : nr_run=1 ops_qseq=244
curr=swapper/0[0] class=idle_sched_class
QMAP: dsp_idx=1 dsp_cnt=0
R stress[1530] -6841ms
scx_state/flags=3/0x1 ops_state/qseq=2/20
sticky/holding_cpu=-1/-1 dsq_id=(n/a)
cpus=ff
QMAP: force_local=0
asm_sysvec_apic_timer_interrupt+0x16/0x20
CPU 2 : nr_run=2 ops_qseq=142
curr=swapper/2[0] class=idle_sched_class
QMAP: dsp_idx=1 dsp_cnt=0
R sshd[1703] -5905ms
scx_state/flags=3/0x9 ops_state/qseq=2/88
sticky/holding_cpu=-1/-1 dsq_id=(n/a)
cpus=ff
QMAP: force_local=1
__x64_sys_ppoll+0xf6/0x120
do_syscall_64+0x7b/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
R fish[1539] -4141ms
scx_state/flags=3/0x9 ops_state/qseq=2/124
sticky/holding_cpu=-1/-1 dsq_id=(n/a)
cpus=ff
QMAP: force_local=1
futex_wait+0x60/0xe0
do_futex+0x109/0x180
__x64_sys_futex+0x117/0x190
do_syscall_64+0x7b/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
CPU 3 : nr_run=2 ops_qseq=162
curr=kworker/u32:12[320] class=ext_sched_class
QMAP: dsp_idx=1 dsp_cnt=0
*R kworker/u32:12[320] +0ms
scx_state/flags=3/0xd ops_state/qseq=0/0
sticky/holding_cpu=-1/-1 dsq_id=(n/a)
cpus=ff
QMAP: force_local=0
scx_dump_state+0x613/0x6f0
scx_ops_error_irq_workfn+0x1f/0x40
irq_work_run_list+0x82/0xd0
irq_work_run+0x14/0x30
__sysvec_irq_work+0x40/0x140
sysvec_irq_work+0x60/0x70
asm_sysvec_irq_work+0x16/0x20
scx_watchdog_workfn+0x15f/0x1c0
process_scheduled_works+0x2b5/0x600
worker_thread+0x269/0x360
kthread+0xeb/0x110
ret_from_fork+0x36/0x40
ret_from_fork_asm+0x1a/0x30
R kworker/3:2[1436] +0ms
scx_state/flags=3/0x9 ops_state/qseq=2/160
sticky/holding_cpu=-1/-1 dsq_id=(n/a)
cpus=08
QMAP: force_local=0
kthread+0xeb/0x110
ret_from_fork+0x36/0x40
ret_from_fork_asm+0x1a/0x30
CPU 7 : nr_run=0 ops_qseq=76
curr=swapper/7[0] class=idle_sched_class
================================================================================
EXIT: runnable task stall (stress[1530] failed to run for 6.841s)
It shows that CPU 3 was running the watchdog when it triggered the error
condition and the scx_qmap thread has been queued on CPU 0 for over 5
seconds but failed to run. It also prints out scx_qmap specific information
- e.g. which tasks are queued on each FIFO and so on using the dump_*() ops.
This dump has proved pretty useful for developing and debugging BPF
schedulers.
Debug dump is generated automatically when the BPF scheduler exits due to an
error. The debug buffer used in such cases is determined by
sched_ext_ops.exit_dump_len and defaults to 32k. If the debug dump overruns
the available buffer, the output is truncated and marked accordingly.
Debug dump output can also be read through the sched_ext_dump tracepoint.
When read through the tracepoint, there is no length limit.
SysRq-D can be used to trigger debug dump at any time while a BPF scheduler
is loaded. This is non-destructive - the scheduler keeps running afterwards.
The output can be read through the sched_ext_dump tracepoint.
v2: - The size of exit debug dump buffer can now be customized using
sched_ext_ops.exit_dump_len.
- sched_ext_ops.dump*() added to enable dumping of BPF scheduler
specific information.
- Tracpoint output and SysRq-D triggering added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
|
||
|
Takashi Sakamoto
|
2fd22faf0e |
firewire: core: record card index in tracepoints event for self ID sequence
This patch is for for-next branch. The selfIDComplete event occurs in the bus managed by one of 1394 OHCI controller in Linux system, while the existing tracepoints events has the lack of data about it to distinguish the issued hardware from the others. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240614004251.460649-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
677ceae190 |
firewire: core: add tracepoints event for self_id_sequence
It is helpful to trace the content of self ID sequence when the core function building bus topology. This commit adds a tracepoints event fot the purpose. It seems not to achieve printing variable length of array in print time without any storage, thus the structure of event includes a superfluous array to store the state of port. Additionally, there is no helper function to print symbol array, thus the state of port is printed as raw value. Link: https://lore.kernel.org/r/20240605235155.116468-12-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
1ccfd1a4c8 |
firewire: core: arrangement header inclusion for tracepoints events
It is a bit inconvenient to put the relative path to local header from tree-wide header. This commit delegates the selection to include headers into users. Link: https://lore.kernel.org/r/20240605235155.116468-11-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Linus Torvalds
|
be2fa8865c |
firewire fixes for v6.10-rc4
- Update tracepoints events introduced in v6.10-rc1 so that it includes the numeric identifier of host card in which the event happens. - replace wiki URL with the current website URL in Kconfig -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZm1CswAKCRCsLtaWM8Lw ExhaAQCu+YeWgrb6eg1ngZVvFYz03xfrItwQrfVBmifNo3PpxAD/azbA7HbquaC+ cueCZmjqxk9SLu4FnrZpExFtQjfvGA4= =3X30 -----END PGP SIGNATURE----- Merge tag 'firewire-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fixes from Takashi Sakamoto: - Update tracepoints events introduced in v6.10-rc1 so that it includes the numeric identifier of host card in which the event happens - replace wiki URL with the current website URL in Kconfig * tag 'firewire-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: record card index in bus_reset_handle tracepoints event firewire: core: record card index in tracepoinrts events derived from bus_reset_arrange_template firewire: core: record card index in async_phy_inbound tracepoints event firewire: core: record card index in async_phy_outbound_complete tracepoints event firewire: core: record card index in async_phy_outbound_initiate tracepoints event firewire: core: record card index in tracepoinrts events derived from async_inbound_template firewire: core: record card index in tracepoinrts events derived from async_outbound_initiate_template firewire: core: record card index in tracepoinrts events derived from async_outbound_complete_template firewire: fix website URL in Kconfig |
||
|
Takashi Sakamoto
|
893098b2af |
firewire: core: record card index in bus_reset_handle tracepoints event
The bus reset event occurs in the bus managed by one of 1394 OHCI controller in Linux system, however the existing tracepoints events has the lack of data about it to distinguish the issued hardware from the others. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-9-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
7507dbc46b |
firewire: core: record card index in tracepoinrts events derived from bus_reset_arrange_template
The asynchronous transmission of phy packet is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-8-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
abbb4bd96d |
firewire: core: record card index in async_phy_inbound tracepoints event
The asynchronous transmission of phy packet is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-7-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
810f2aa835 |
firewire: core: record card index in async_phy_outbound_complete tracepoints event
The asynchronous transmission of phy packet is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-6-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
3cb44a72a3 |
firewire: core: record card index in async_phy_outbound_initiate tracepoints event
The asynchronous transaction is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-5-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
65ec7ebefe |
firewire: core: record card index in tracepoinrts events derived from async_inbound_template
The asynchronous transaction is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
64e02b64fb |
firewire: core: record card index in tracepoinrts events derived from async_outbound_initiate_template
The asynchronous transaction is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Takashi Sakamoto
|
e7da16abf0 |
firewire: core: record card index in tracepoinrts events derived from async_outbound_complete_template
The asynchronous transaction is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> |
||
|
Jakub Kicinski
|
4c7d3d79c7 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. No conflicts, no adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Dmitry Safonov
|
96be3dcd01 |
net/tcp: Add tcp-md5 and tcp-ao tracepoints
Instead of forcing userspace to parse dmesg (that's what currently is happening, at least in codebase of my current company), provide a better way, that can be enabled/disabled in runtime. Currently, there are already tcp events, add hashing related ones there, too. Rasdaemon currently exercises net_dev_xmit_timeout, devlink_health_report, but it'll be trivial to teach it to deal with failed hashes. Otherwise, BGP may trace/log them itself. Especially exciting for possible investigations is key rotation (RNext_key requests). Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Christian Brauner
|
a82c13d299
|
Merge patch series "cachefiles: some bugfixes and cleanups for ondemand requests"
libaokun@huaweicloud.com <libaokun@huaweicloud.com> says: We've been testing ondemand mode for cachefiles since January, and we're almost done. We hit a lot of issues during the testing period, and this patch set fixes some of the issues related to ondemand requests. The patches have passed internal testing without regression. The following is a brief overview of the patches, see the patches for more details. Patch 1-5: Holding reference counts of reqs and objects on read requests to avoid malicious restore leading to use-after-free. Patch 6-10: Add some consistency checks to copen/cread/get_fd to avoid malicious copen/cread/close fd injections causing use-after-free or hung. Patch 11: When cache is marked as CACHEFILES_DEAD, flush all requests, otherwise the kernel may be hung. since this state is irreversible, the daemon can read open requests but cannot copen. Patch 12: Allow interrupting a read request being processed by killing the read process as a way of avoiding hung in some special cases. fs/cachefiles/daemon.c | 3 +- fs/cachefiles/internal.h | 5 + fs/cachefiles/ondemand.c | 217 ++++++++++++++++++++++-------- include/trace/events/cachefiles.h | 8 +- 4 files changed, 176 insertions(+), 57 deletions(-) * patches from https://lore.kernel.org/r/20240522114308.2402121-1-libaokun@huaweicloud.com: cachefiles: make on-demand read killable cachefiles: flush all requests after setting CACHEFILES_DEAD cachefiles: Set object to close if ondemand_id < 0 in copen cachefiles: defer exposing anon_fd until after copy_to_user() succeeds cachefiles: never get a new anonymous fd if ondemand_id is valid cachefiles: add spin_lock for cachefiles_ondemand_info cachefiles: add consistency check for copen/cread cachefiles: remove err_put_fd label in cachefiles_ondemand_daemon_read() cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read() cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd() cachefiles: remove requests from xarray during flushing requests cachefiles: add output string to cachefiles_obj_[get|put]_ondemand_fd Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Baokun Li
|
da4a827416
|
cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read()
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0xb41/0xb60
Read of size 8 at addr ffff888122e84088 by task ondemand-04-dae/963
CPU: 13 PID: 963 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #564
Call Trace:
kasan_report+0x93/0xc0
cachefiles_ondemand_daemon_read+0xb41/0xb60
vfs_read+0x169/0xb50
ksys_read+0xf5/0x1e0
Allocated by task 116:
kmem_cache_alloc+0x140/0x3a0
cachefiles_lookup_cookie+0x140/0xcd0
fscache_cookie_state_machine+0x43c/0x1230
[...]
Freed by task 792:
kmem_cache_free+0xfe/0x390
cachefiles_put_object+0x241/0x480
fscache_cookie_state_machine+0x5c8/0x1230
[...]
==================================================================
Following is the process that triggers the issue:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_withdraw_cookie
cachefiles_ondemand_clean_object(object)
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
msg->object_id = req->object->ondemand->ondemand_id
------ restore ------
cachefiles_ondemand_restore
xas_for_each(&xas, req, ULONG_MAX)
xas_set_mark(&xas, CACHEFILES_REQ_NEW)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
copy_to_user(_buffer, msg, n)
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
------ close(fd) ------
cachefiles_ondemand_fd_release
cachefiles_put_object
cachefiles_put_object
kmem_cache_free(cachefiles_object_jar, object)
REQ_A->object->ondemand->ondemand_id
// object UAF !!!
When we see the request within xa_lock, req->object must not have been
freed yet, so grab the reference count of object before xa_unlock to
avoid the above issue.
Fixes:
|
||
|
Baokun Li
|
cc5ac966f2
|
cachefiles: add output string to cachefiles_obj_[get|put]_ondemand_fd
This lets us see the correct trace output.
Fixes:
|
||
|
Linus Torvalds
|
b4d88a60fe |
block-6.10-20240523
-----BEGIN PGP SIGNATURE-----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=Btam
-----END PGP SIGNATURE-----
Merge tag 'block-6.10-20240523' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
"Followup block updates, mostly due to NVMe being a bit late to the
party. But nothing major in there, so not a big deal.
In detail, this contains:
- NVMe pull request via Keith:
- Fabrics connection retries (Daniel, Hannes)
- Fabrics logging enhancements (Tokunori)
- RDMA delete optimization (Sagi)
- ublk DMA alignment fix (me)
- null_blk sparse warning fixes (Bart)
- Discard support for brd (Keith)
- blk-cgroup list corruption fixes (Ming)
- blk-cgroup stat propagation fix (Waiman)
- Regression fix for plugging stall with md (Yu)
- Misc fixes or cleanups (David, Jeff, Justin)"
* tag 'block-6.10-20240523' of git://git.kernel.dk/linux: (24 commits)
null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'
blk-throttle: remove unused struct 'avg_latency_bucket'
block: fix lost bio for plug enabled bio based device
block: t10-pi: add MODULE_DESCRIPTION()
blk-mq: add helper for checking if one CPU is mapped to specified hctx
blk-cgroup: Properly propagate the iostat update up the hierarchy
blk-cgroup: fix list corruption from reorder of WRITE ->lqueued
blk-cgroup: fix list corruption from resetting io stat
cdrom: rearrange last_media_change check to avoid unintentional overflow
nbd: Fix signal handling
nbd: Remove a local variable from nbd_send_cmd()
nbd: Improve the documentation of the locking assumptions
nbd: Remove superfluous casts
nbd: Use NULL to represent a pointer
brd: implement discard support
null_blk: Fix two sparse warnings
ublk_drv: set DMA alignment mask to 3
nvme-rdma, nvme-tcp: include max reconnects for reconnect logging
nvmet-rdma: Avoid o(n^2) loop in delete_ctrl
nvme: do not retry authentication failures
...
|
||
|
Steven Rostedt (Google)
|
2c92ca849f |
tracing/treewide: Remove second parameter of __assign_str()
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
||
|
Linus Torvalds
|
72ece20127 |
f2fs update for 6.10-rc1
In this round, we've tried to address some performance issues on zoned storage
such as direct IO and write_hints. In addition, we've migrated some IO paths
using folio. Meanwhile, there are multiple bug fixes in the compression paths,
sanity check conditions, and error handlers.
Enhancement:
- allow direct io of pinned files for zoned storage
- assign the write hint per stream by default
- convert read paths and test_writeback to folio
- avoid allocating WARM_DATA segment for direct IO
Bug fix:
- fix false alarm on invalid block address
- fix to add missing iput() in gc_data_segment()
- fix to release node block count in error path of f2fs_new_node_page()
- compress: don't allow unaligned truncation on released compress inode
- compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
- compress: fix error path of inc_valid_block_count()
- compress: fix to update i_compr_blocks correctly
- fix block migration when section is not aligned to pow2
- don't trigger OPU on pinfile for direct IO
- fix to do sanity check on i_xattr_nid in sanity_check_inode()
- write missing last sum blk of file pinning section
- clear writeback when compression failed
- fix to adjust appropirate defragment pg_end
As usual, there are several minor code clean-ups, and fixes to manage missing
corner cases in the error paths.
-----BEGIN PGP SIGNATURE-----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=3mwj
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.10.rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've tried to address some performance issues on zoned
storage such as direct IO and write_hints. In addition, we've migrated
some IO paths using folio. Meanwhile, there are multiple bug fixes in
the compression paths, sanity check conditions, and error handlers.
Enhancements:
- allow direct io of pinned files for zoned storage
- assign the write hint per stream by default
- convert read paths and test_writeback to folio
- avoid allocating WARM_DATA segment for direct IO
Bug fixes:
- fix false alarm on invalid block address
- fix to add missing iput() in gc_data_segment()
- fix to release node block count in error path of
f2fs_new_node_page()
- compress:
- don't allow unaligned truncation on released compress inode
- cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
- fix error path of inc_valid_block_count()
- fix to update i_compr_blocks correctly
- fix block migration when section is not aligned to pow2
- don't trigger OPU on pinfile for direct IO
- fix to do sanity check on i_xattr_nid in sanity_check_inode()
- write missing last sum blk of file pinning section
- clear writeback when compression failed
- fix to adjust appropirate defragment pg_end
As usual, there are several minor code clean-ups, and fixes to manage
missing corner cases in the error paths"
* tag 'f2fs-for-6.10.rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (50 commits)
f2fs: initialize last_block_in_bio variable
f2fs: Add inline to f2fs_build_fault_attr() stub
f2fs: fix some ambiguous comments
f2fs: fix to add missing iput() in gc_data_segment()
f2fs: allow dirty sections with zero valid block for checkpoint disabled
f2fs: compress: don't allow unaligned truncation on released compress inode
f2fs: fix to release node block count in error path of f2fs_new_node_page()
f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
f2fs: compress: fix error path of inc_valid_block_count()
f2fs: compress: fix typo in f2fs_reserve_compress_blocks()
f2fs: compress: fix to update i_compr_blocks correctly
f2fs: check validation of fault attrs in f2fs_build_fault_attr()
f2fs: fix to limit gc_pin_file_threshold
f2fs: remove unused GC_FAILURE_PIN
f2fs: use f2fs_{err,info}_ratelimited() for cleanup
f2fs: fix block migration when section is not aligned to pow2
f2fs: zone: fix to don't trigger OPU on pinfile for direct IO
f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()
f2fs: fix to avoid allocating WARM_DATA segment for direct IO
f2fs: remove redundant parameter in is_next_segment_free()
...
|
||
|
Linus Torvalds
|
eb6a9339ef |
Mainly singleton patches, documented in their respective changelogs.
Notable series include:
- Some maintenance and performance work for ocfs2 in Heming Zhao's
series "improve write IO performance when fragmentation is high".
- Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
exposed by fstests".
- kfifo header rework from Andy Shevchenko in the series "kfifo: Clean
up kfifo.h".
- GDB script fixes from Florian Rommel in the series "scripts/gdb: Fixes
for $lx_current and $lx_per_cpu".
- After much discussion, a coding-style update from Barry Song
explaining one reason why inline functions are preferred over macros.
The series is "codingstyle: avoid unused parameters for a function-like
macro".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkpLYQAKCRDdBJ7gKXxA
jo9NAQDctSD3TMXqxqCHLaEpCaYTYzi6TGAVHjgkqGzOt7tYjAD/ZIzgcmRwthjP
R7SSiSgZ7UnP9JRn16DQILmFeaoG1gs=
=lYhr
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
"Mainly singleton patches, documented in their respective changelogs.
Notable series include:
- Some maintenance and performance work for ocfs2 in Heming Zhao's
series "improve write IO performance when fragmentation is high".
- Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
exposed by fstests".
- kfifo header rework from Andy Shevchenko in the series "kfifo:
Clean up kfifo.h".
- GDB script fixes from Florian Rommel in the series "scripts/gdb:
Fixes for $lx_current and $lx_per_cpu".
- After much discussion, a coding-style update from Barry Song
explaining one reason why inline functions are preferred over
macros. The series is "codingstyle: avoid unused parameters for a
function-like macro""
* tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (62 commits)
fs/proc: fix softlockup in __read_vmcore
nilfs2: convert BUG_ON() in nilfs_finish_roll_forward() to WARN_ON()
scripts: checkpatch: check unused parameters for function-like macro
Documentation: coding-style: ask function-like macros to evaluate parameters
nilfs2: use __field_struct() for a bitwise field
selftests/kcmp: remove unused open mode
nilfs2: remove calls to folio_set_error() and folio_clear_error()
kernel/watchdog_perf.c: tidy up kerneldoc
watchdog: allow nmi watchdog to use raw perf event
watchdog: handle comma separated nmi_watchdog command line
nilfs2: make superblock data array index computation sparse friendly
squashfs: remove calls to set the folio error flag
squashfs: convert squashfs_symlink_read_folio to use folio APIs
scripts/gdb: fix detection of current CPU in KGDB
scripts/gdb: make get_thread_info accept pointers
scripts/gdb: fix parameter handling in $lx_per_cpu
scripts/gdb: fix failing KGDB detection during probe
kfifo: don't use "proxy" headers
media: stih-cec: add missing io.h
media: rc: add missing io.h
...
|