The field inverse in struct fbcon_display is unused. Remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
In au1200fb_drv_probe(), when platform_get_irq fails(), it directly
returns from the function with an error code, which causes a memory
leak.
Replace it with a goto label to ensure proper cleanup.
Fixes: 4e88761f5f ("fbdev: au1200fb: Fix missing IRQ check in au1200fb_drv_probe")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Fix Sun FFB1 corrupted video out ([1] and [2]) by disabling overlay and
initializing window mode to a known state. The issue never appeared on
my FFB2+/vertical nor Elite3D/M6. It could also depend on the PROM
version.
/SUNW,ffb@1e,0: FFB at 000001fc00000000, type 11, DAC pnum[236c] rev[10] manuf_rev[4]
X (II) /dev/fb0: Detected FFB1, Z-buffer, Single-buffered.
X (II) /dev/fb0: BT9068 (PAC1) ramdac detected (with normal cursor control)
X (II) /dev/fb0: Detected Creator/Creator3D
[1] https://www.instagram.com/p/DUTcSmSjSem/
[2] https://chaos.social/@ReneRebe/116023241660154102
Signed-off-by: René Rebe <rene@exactco.de>
Cc: stable@kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Check the return value of clk_enable() in au1100fb_drv_resume() and
return the error on failure.
This ensures the system is aware of the resume failure and can track
its state accurately.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
do_con_write(), fbcon_redraw.*() invoke console_conditional_schedule()
which is a conditional scheduling point based on printk's internal
variables console_may_schedule. It may only be used if the console lock
is acquired for instance via console_lock() or console_trylock().
Prinkt sets the internal variable to 1 (and allows to schedule)
if the console lock has been acquired via console_lock(). The trylock
does not allow it.
The console_conditional_schedule() invocation in do_con_write() is
invoked shortly before console_unlock().
The console_conditional_schedule() invocation in fbcon_redraw.*()
original from fbcon_scroll() / vt's con_scroll() which originate from a
line feed.
In console_unlock() the variable is set to 0 (forbids to schedule) and
it tries to schedule while making progress printing. This is brand new
compared to when console_conditional_schedule() was added in v2.4.9.11.
In v2.6.38-rc3, console_unlock() (started its existence) iterated over
all consoles and flushed them with disabled interrupts. A scheduling
attempt here was not possible, it relied that a long print scheduled
before console_unlock().
Since commit 8d91f8b153 ("printk: do cond_resched() between lines
while outputting to consoles"), which appeared in v4.5-rc1,
console_unlock() attempts to schedule if it was allowed to schedule
while during console_lock(). Each record is idealy one line so after
every line feed.
This console_conditional_schedule() is also only relevant on
PREEMPT_NONE and PREEMPT_VOLUNTARY builds. In other configurations
cond_resched() becomes a nop and has no impact.
I'm bringing this all up just proof that it is not required anymore. It
becomes a problem on a PREEMPT_RT build with debug code enabled because
that might_sleep() in cond_resched() remains and triggers a warnings.
This is due to
legacy_kthread_func-> console_flush_one_record -> vt_console_print-> lf
-> con_scroll -> fbcon_scroll
and vt_console_print() acquires a spinlock_t which does not allow a
voluntary schedule. There is no need to fb_scroll() to schedule since
console_flush_one_record() attempts to schedule after each line.
!PREEMPT_RT is not affected because the legacy printing thread is only
enabled on PREEMPT_RT builds.
Therefore I suggest to remove console_conditional_schedule().
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Fixes: 5f53ca3ff8 ("printk: Implement legacy printer kthread for PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com> # from printk() POV
Signed-off-by: Helge Deller <deller@gmx.de>
mask is u8, so it should use 0xff instead of 0xfff
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not
freed if the error path is reached.
Fixes: e7b995371f ("video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
We know "size" is non-zero because it is checked on the line before.
Delete the duplicate check and pull the code in a tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The sh_mobile_lcdc driver exposes overlay configuration via sysfs, but the
core driver does not require CONFIG_FB_DEVICE.
Make overlay sysfs optional so that the driver can build and operate
even when FB_DEVICE is disabled. The kernel naturally ignores the
missing attribute group, preserving buildability and type safety.
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
omapfb provides several sysfs interfaces for framebuffer configuration
and debugging, but these are not required for the core driver.
Remove the hard dependency on CONFIG_FB_DEVICE and make sysfs support
optional by using dev_of_fbinfo() to obtain the backing device at runtime.
When FB_DEVICE is disabled, sysfs operations are skipped while the code
still builds and is type-checked.
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
If fbcon_open() fails when called from con2fb_acquire_newinfo() then
info->fbcon_par pointer remains NULL which is later dereferenced.
Add check for return value of the function con2fb_acquire_newinfo() to
avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d1baa4ffa6 ("fbcon: set_con2fb_map fixes")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
The HyperV DRM driver is available since 5.14. This makes the hyperv_fb
driver redundant, remove it.
Signed-off-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The fbdev sysfs attributes are registered after sending the uevent for
the device creation, leaving a race window where e.g. udev rules may
not be able to access the sysfs attributes because the registration is
not done yet.
Fix this by switching to device_create_with_groups(). This also results in
a nice cleanup. After switching to device_create_with_groups() all that
is left of fb_init_device() is setting the drvdata and that can be passed
to device_create[_with_groups]() too. After which fb_init_device() can
be completely removed.
Dropping fb_init_device() + fb_cleanup_device() in turn allows removing
fb_info.class_flag as they were the only user of this field.
Fixes: 5fc830d6ac ("fbdev: Register sysfs groups through device_add_group")
Cc: stable@vger.kernel.org
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from
userspace to kernelspace, and instead directly references the memory,
which can cause problems if invalid data is passed from userspace. Fix
this all up by correctly copying the memory before accessing it within
the kernel.
Reported-by: Tianchu Chen <flynnnchen@tencent.com>
Cc: stable <stable@kernel.org>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
The following log reveals it:
rivafb: setting virtual Y resolution to 2184
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline]
RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546
Call Trace:
nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603
nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline]
CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246
riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779
rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188
__x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors.
- Use pin_init::zeroed() for fops initialization.
- Annotate DRM helpers with __rust_helper.
- Improve safety documentation for gem::Object::new().
- Update AlwaysRefCounted imports.
- mm: Prevent integer overflow in page_align().
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switched to use virtual planes by default
- Fixed DSI CMD panels on DPU 3.x
- Rewrote format handling to remove intermediate representation
- Fixed watchdog on DPU 8.x+
- Fixed TE / Vsync source setting on DPU 8.x+
- Added 3D_Mux on SC7280
- Kaanapali platform support
- Fixed UBWC register programming
- Made RM reserve DSPP-enabled mixers for CRTCs with LMs.
- Gamma correction support
- DP:
- Enabled support for eDP 1.4+ link rate tables
- Fixed MDSS1 DP indices on SA8775P, making them to work
- Fixed msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Documented QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switched to divider_determine_rate()
- MDP5:
- Dropped support for MSM8998, SDM660 and SDM630 (switched over
to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation.
- Get rid of the Result<impl PinInit<T, E>> anti-pattern.
- Relocate initializer-specific code into the appropriate initializer.
- Use CStr::from_bytes_until_nul() to remove custom helpers.
- Improve handling of unexpected firmware values.
- Clean up redundant debug prints.
- Replace c_str!() with native Rust C-string literals.
- Update nova-core task list.
nova:
- Align GEM object size to system page size.
tyr:
- Use generated uAPI bindings for GpuInfo.
- Replace manual sleeps with read_poll_timeout().
- Replace c_str!() with native Rust C-string literals.
- Suppress warnings for unread fields.
- Fix incorrect register name in print statement.
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmmMLAcACgkQDHTzWXnE
hr7aAw//bQ2WLhXeMqWyqrPPe51l2DmWvbdwP6TKUjzMwd9+xvs6wQcSg80Mn230
0vqSpqKq2aMB6GMmz7wdHG8JgZOvO7qDf2TZodXe5lvBiAAPjzX+UE/0bIQKuhym
Ufb7tqCIPsj6TpcD3ef/173x3BnVPA6Y7lS11KaaG5l01vUAVlTD1vfWGDQp/L6P
7g94cC+0+3eYZyKxE1+Rn7FDXdw08u+vtLchIoowcAHobgucZ8K/XtZZoqFFy3sj
ZZN580AhyZoGcgmn2KhNvU4B+3tBFFMSVZkJm7skOO0IB2AMQGdEr0uVUDzLGc7K
DrLaxYwM6HfxM4o0r0Ai0WCuoysCAJ95M2Cp58uDuNcew4lRTtIUqz32Sm2OJ8bD
Z91Rvh/kOcA0Ru11Sb/kQvy9/OJ54CqojKVaUlkFo9VhHyPCPo9hjnPvaDvCt34N
FmnhuVpZMWqcjjq5yO/192qpDJnm470eQExvkZ4YpgmWkekND0zwaT4PG4763dZJ
juPlBQ5WtUlIzlUpRxdHE7C7ht1rWRS+HdzSYPM5aHTXDvktJvcA+1b/Jyicc+x4
QZiZ/1AC0KKlLrZxpVpEcjkPdQj2CiCXHQ+0YjDfO3cHo/55EfKj4iiARzhDzokf
h7FgKwvVhc9DycSq8KPGAf09AswceGAtvB1rKk+Jh9D/GqbgGtM=
=RFJ2
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
Move x86's edid_info into sysfb_primary_display as a new field named
edid. Adapt all users.
An instance of edid_info has only been defined on x86. With the move
into sysfb_primary_display, it becomes available on all architectures.
Therefore remove this contraint from CONFIG_FIRMWARE_EDID.
x86 fills the EDID data from boot_params.edid_info. DRM drivers pick
up the raw data and make it available to DRM clients. Replace the
drivers' references to edid_info and instead use the sysfb_display_info
as passed from sysfb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of screen_info, store a copy of sysfb_primary_display as
device data. Pick it up in drivers. Later changes will add additional
data to the display info, such as EDID information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Framework updates:
- fonts: Add Terminus 10x18 console font [Neilay Kharwadkar]
Driver fixes:
- gbefb: fix to use physical address instead of dma address [René Rebe]
- tcx.c fix mem_map to correct smem_start offset [René Rebe]
- pxafb: Fix multiple clamped values in pxafb_adjust_timing [Thorsten Blum]
- ssd1307fb: fix potential page leak in ssd1307fb_probe() [Abdun Nihaal]
Cleanups:
- vga16fb: Request memory region [Javier Garcia]
- vga16fb: replace printk() with dev_*() in probe [Vivek BalachandharTN]
- vesafb, gxt4500fb, tridentfb: Use dev_dbg() instead of printk() [Javier Garcia]
- i810: use dev_info() [Shi Hao]
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaTSM3gAKCRD3ErUQojoP
X+J6AP4+xxGAluBRwJwUXX+imIKq9DxkufXL4UzECl1WGeNVMAEAxAEcV+5RtvtQ
lh7yk5tUr5yjntP1HRaVT93aGhpv6QQ=
=0Oyt
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"The Termius 10x18 console bitmap font has been added. It is good
match for modern 13-16 inch laptop displays with resolutions like
1280x800 and 1440x900 pixels.
The gbefb and tcx.c drivers got some fixes to restore X11 support,
pxafb was not actually clamping input values and the ssd1307fb driver
leaked memory in the failure path.
The other patches convert some common drivers to use dev_info() and
dev_dbg() instead of printk(). Summary:
Framework updates:
- fonts: Add Terminus 10x18 console font [Neilay Kharwadkar]
Driver fixes:
- gbefb: fix to use physical address instead of dma address [René Rebe]
- tcx.c fix mem_map to correct smem_start offset [René Rebe]
- pxafb: Fix multiple clamped values in pxafb_adjust_timing [Thorsten Blum]
- ssd1307fb: fix potential page leak in ssd1307fb_probe() [Abdun Nihaal]
Cleanups:
- vga16fb: Request memory region [Javier Garcia]
- vga16fb: replace printk() with dev_*() in probe [Vivek BalachandharTN]
- vesafb, gxt4500fb, tridentfb: Use dev_dbg() instead of printk() [Javier Garcia]
- i810: use dev_info() [Shi Hao]"
* tag 'fbdev-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: ssd1307fb: fix potential page leak in ssd1307fb_probe()
fbdev: i810: use appopriate log interface dev_info
fbdev: tridentfb: replace printk() with dev_*() in probe
lib/fonts: Add Terminus 10x18 console font
fbdev: pxafb: Fix multiple clamped values in pxafb_adjust_timing
fbdev: tcx.c fix mem_map to correct smem_start offset
fbdev: gxt4500fb: Use dev_err instead of printk
fbdev: gbefb: fix to use physical address instead of dma address
fbdev: vesafb: Use dev_* fn's instead printk
fbdev: vga16fb: Request memory region
fbdev: vga16fb: replace printk() with dev_*() in probe
The page allocated for vmem using __get_free_pages() is not freed on the
error paths after it. Fix that by adding a corresponding __free_pages()
call to the error path.
Fixes: facd94bc45 ("fbdev: ssd1307fb: Allocate page aligned video memory.")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Helge Deller <deller@gmx.de>
new driver:
- Arm Ethos-U65/U85 accel driver
core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement.
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA,
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel.
- ilitek-ili9881c : add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615 as
supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205
-----BEGIN PGP SIGNATURE-----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=gpnQ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
There were many printk log interfaces which do no had
any KERN_INFO with them and they can be replaced with
dev_info which will allow better log level handling
making messages clear and manageable.
No functional changes to the driver behavior are introduced.
Only the logging method has been replaced as per modern
kernel coding guidelines.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The variables were never clamped because the return value of clamp_val()
was not used. Fix this by assigning the clamped values, and use clamp()
instead of clamp_val().
Cc: stable@vger.kernel.org
Fixes: 3f16ff608a ("[ARM] pxafb: cleanup of the timing checking code")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Helge Deller <deller@gmx.de>
403ae52ac0 ("sparc: fix drivers/video/tcx.c warning") changed the
physbase initializing breaking the user-space mmap, e.g. for Xorg
entirely.
Fix fbdev mmap table so the sbus mmap helper work correctly, and
not try to map vastly (physbase) offset memory.
Fixes: 403ae52ac0 ("sparc: fix drivers/video/tcx.c warning")
Cc: <stable@vger.kernel.org>
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Helge Deller <deller@gmx.de>
There are no implementations of fb_debug_enter and fb_debug_leave.
Remove the callbacks from struct fb_ops and clean up the caller.
The field save_graphics in fbcon_par is also no longer required.
Remove it as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-6-tzimmermann@suse.de
Protect vga_switcheroo_client_fb_set() with console lock. Avoids OOB
access in fbcon_remap_all(). Without holding the console lock the call
races with switching outputs.
VGA switcheroo calls fbcon_remap_all() when switching clients. The fbcon
function uses struct fb_info.node, which is set by register_framebuffer().
As the fb-helper code currently sets up VGA switcheroo before registering
the framebuffer, the value of node is -1 and therefore not a legal value.
For example, fbcon uses the value within set_con2fb_map() [1] as an index
into an array.
Moving vga_switcheroo_client_fb_set() after register_framebuffer() can
result in VGA switching that does not switch fbcon correctly.
Therefore move vga_switcheroo_client_fb_set() under fbcon_fb_registered(),
which already holds the console lock. Fbdev calls fbcon_fb_registered()
from within register_framebuffer(). Serializes the helper with VGA
switcheroo's call to fbcon_remap_all().
Although vga_switcheroo_client_fb_set() takes an instance of struct fb_info
as parameter, it really only needs the contained fbcon state. Moving the
call to fbcon initialization is therefore cleaner than before. Only amdgpu,
i915, nouveau and radeon support vga_switcheroo. For all other drivers,
this change does nothing.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.17/source/drivers/video/fbdev/core/fbcon.c#L2942 # [1]
Fixes: 6a9ee8af34 ("vga_switcheroo: initial implementation (v15)")
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: <stable@vger.kernel.org> # v2.6.34+
Link: https://patch.msgid.link/20251105161549.98836-1-tzimmermann@suse.de
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmkaT2IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGnakIAIq6O35+abAlDGe7
n8IwX/4hwDJ9Ol2vddg6jTdio3szSlvcXRAyijkG35etLap+i+Q78Q9H1fRcQ8CF
5t9kfs5oCVWEDlsHMI+Q38vYB3tWikaIUIuao6pH5U50fsA0KM/287TLYdzvmBsK
gy0BHoZhl++xdMsD2HNwt08RrK/IyY+Zp9i7pKhcsxJiJCgy8nq5ZxhmRPbqTKNc
IqIBPzG+UYcOd88Iz377Ax+TnzWaTpwyvfaiU8DVFMN0FeENdk1FY8ClYfpYxCDH
Pm5NzL/f54VtdZ3aL1fKmYwWN7WFJT4FH3l6DOvtCc+Gx3KW1a3Y508CbqYBXvgY
QV4oH4Y=
=iSoY
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc6' into drm-next
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
While debuggigng why X would not start on mips64 Sgi/O2 I found the
phys adress being off. Turns out the gbefb passed the internal
dma_addr as phys. May be broken pre git history. Fix by converting
dma_to_phys.
Signed-off-by: René Rebe <rene@exactco.de>
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Family dev_* fn's will show device name, giving extra info to logs.
Delete the prefix `vesafb:` from msg strings, not needed now, e.g.:
vesa-framebuffer vesa-framebuffer.0: scrolling: redraw
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This patch reserve and release VGA memory region.
This align with Documentation/drm/todo.rst
"Request memory regions in all fbdev drivers"
I've tested with 32bits kernel and qemu.
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Use dev_*() with &dev->dev and drop the hard-coded prefix. Keep
original severities. No functional change.
Signed-off-by: Vivek BalachandharTN <vivek.balachandhar@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Actually check the return value from pll_ops->init_pll()
as it can return an error.
If the card's BIOS didn't run because it's not the primary VGA card
the fact that the xclk source is unsupported is printed as shown
below but the driver continues on regardless and on my machine causes
a hard lock up.
[ 61.470088] atyfb 0000:03:05.0: enabling device (0080 -> 0083)
[ 61.476191] atyfb: using auxiliary register aperture
[ 61.481239] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x27]
[ 61.487569] atyfb: 512K SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63 MHz XCLK
[ 61.496112] atyfb: Unsupported xclk source: 5.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Recently, we discovered the following issue through syzkaller:
BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0
Read of size 4 at addr ff11000001b3c69c by task syz.xxx
...
Call Trace:
<TASK>
dump_stack_lvl+0xab/0xe0
print_address_description.constprop.0+0x2c/0x390
print_report+0xb9/0x280
kasan_report+0xb8/0xf0
fb_mode_is_equal+0x285/0x2f0
fbcon_mode_deleted+0x129/0x180
fb_set_var+0xe7f/0x11d0
do_fb_ioctl+0x6a0/0x750
fb_ioctl+0xe0/0x140
__x64_sys_ioctl+0x193/0x210
do_syscall_64+0x5f/0x9c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Based on experimentation and analysis, during framebuffer unregistration,
only the memory of fb_info->modelist is freed, without setting the
corresponding fb_display[i]->mode to NULL for the freed modes. This leads
to UAF issues during subsequent accesses. Here's an example of reproduction
steps:
1. With /dev/fb0 already registered in the system, load a kernel module
to register a new device /dev/fb1;
2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP);
3. Switch console from fb to VGA (to allow normal rmmod of the ko);
4. Unload the kernel module, at this point fb1's modelist is freed, leaving
a wild pointer in fb_display[];
5. Trigger the bug via system calls through fb0 attempting to delete a mode
from fb0.
Add a check in do_unregister_framebuffer(): if the mode to be freed exists
in fb_display[], set the corresponding mode pointer to NULL.
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Commit e24cca19ba ("sh: Kill off MAX_DMA_ADDRESS leftovers.") removed
the define ONCHIP_NR_DMA_CHANNELS. So that the leftover reference needs
to be replaced by CONFIG_NR_ONCHIP_DMA_CHANNELS to compile successfully
with CONFIG_PVR2_DMA enabled.
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
The of_find_node_by_name() function returns a device tree node with its
reference count incremented. The caller is responsible for calling
of_node_put() to release this reference when done.
Found via static analysis.
Fixes: cc5d0189b9 ("[PATCH] powerpc: Remove device_node addrs/n_addr")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
Bug fixes:
- Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds (Albin Babu Varghese)
- Fix logic error in "offb" name match (Finn Thain)
- simplefb: Fix use after free in simplefb_detach_genpds() (Janne Grunau)
- s3fb: Various fixes and powersave improvements (Zsolt Kajtar)
Enhancements & code cleanups:
- Various fixes in the documentation (Bagas Sanjaya)
- Use string choices helpers (Chelsy Ratnawat)
- xenfb: Use vmalloc_array to simplify code (Qianfeng Rong)
- mb862xxfb: Use int type to store negative error codes (Qianfeng Rong)
- Make drivers depend on LCD_CLASS_DEVICE (Thomas Zimmermann)
- radeonfb: Remove stale product link in Kconfig (Sukrut Heroorkar)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaOkH4wAKCRD3ErUQojoP
X4sPAP9NEDUdf2ZcPUiG30XVKdhHlxEffzAWs0RsSBaYlrAMjwD+Ja6IVI/5ib+e
xEeDeExWrlC77Y90j8reBw9B+/Xu4Ak=
=WS3Q
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the usual bunch of smaller bug fixes, the majority of changes
were by Zsolt Kajtar to improve the s3fb driver.
Bug fixes:
- Bounds checking to fix vmalloc-out-of-bounds (Albin Babu Varghese)
- Fix logic error in "offb" name match (Finn Thain)
- simplefb: Fix use after free in (Janne Grunau)
- s3fb: Various fixes and powersave improvements (Zsolt Kajtar)
Enhancements & code cleanups:
- Various fixes in the documentation (Bagas Sanjaya)
- Use string choices helpers (Chelsy Ratnawat)
- xenfb: Use vmalloc_array to simplify code (Qianfeng Rong)
- mb862xxfb: use signed type for error codes (Qianfeng Rong)
- Make drivers depend on LCD_CLASS_DEVICE (Thomas Zimmermann)
- radeonfb: Remove stale product link in Kconfig (Sukrut Heroorkar)"
* tag 'fbdev-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix logic error in "offb" name match
fbdev: Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds
fbdev: Make drivers depend on LCD_CLASS_DEVICE
fbdev: radeonfb: Remove stale product link in Kconfig
Documentation: fb: Retitle driver docs
Documentation: fb: ep93xx: Demote section headings
Documentation: fb: Split toctree
fbdev: simplefb: Fix use after free in simplefb_detach_genpds()
fbdev: s3fb: Revert mclk stop in suspend
fbdev: mb862xxfb: Use int type to store negative error codes
fbdev: Use string choices helpers
fbdev: core: Fix ubsan warning in pixel_to_pat
fbdev: s3fb: Implement 1 and 2 BPP modes, improve 4 BPP
fbdev: s3fb: Implement powersave for S3 FB
fbdev: xenfb: Use vmalloc_array to simplify code
A regression was reported to me recently whereby /dev/fb0 had disappeared
from a PowerBook G3 Series "Wallstreet". The problem shows up when the
"video=ofonly" parameter is passed to the kernel, which is what the
bootloader does when "no video driver" is selected. The cause of the
problem is the "offb" string comparison, which got mangled when it got
refactored. Fix it.
Cc: stable@vger.kernel.org
Fixes: 93604a5ade ("fbdev: Handle video= parameter in video/cmdline.c")
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmjkpakTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXip5B/48MvTFJ1qwRGPVzevZQ8Z4SDogEREp
69VS/xRf1YCIzyXyanwqf1dXLq8NAqicSp6ewpJAmNA55/9O0cwT2EtohjeGCu61
krPIvS3KT7xI0uSEniBdhBtALYBscnQ0e3cAbLNzL7bwA6Q6OmvoIawpBADgE/cW
aZNCK9jy+WUqtXc6lNtkJtST0HWGDn0h04o2hjqIkZ+7ewjuEEJBUUB/JZwJ41Od
UxbID0PAcn9O4n/u/Y/GH65MX+ddrdCgPHEGCLAGAKT24lou3NzVv445OuCw0c4W
ilALIRb9iea56ZLVBW5O82+7g9Ag41LGq+841MNlZjeRNONGykaUpTWZ
=OR26
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Unify guest entry code for KVM and MSHV (Sean Christopherson)
- Switch Hyper-V MSI domain to use msi_create_parent_irq_domain()
(Nam Cao)
- Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV
(Mukesh Rathor)
- Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov)
- Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna
Kumar T S M)
- Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari,
Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley)
* tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyperv: Remove the spurious null directive line
MAINTAINERS: Mark hyperv_fb driver Obsolete
fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver
Drivers: hv: Make CONFIG_HYPERV bool
Drivers: hv: Add CONFIG_HYPERV_VMBUS option
Drivers: hv: vmbus: Fix typos in vmbus_drv.c
Drivers: hv: vmbus: Fix sysfs output format for ring buffer index
Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store()
x86/hyperv: Switch to msi_create_parent_irq_domain()
mshv: Use common "entry virt" APIs to do work in root before running guest
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
mshv: Handle NEED_RESCHED_LAZY before transferring to guest
x86/hyperv: Add kexec/kdump support on Azure CVMs
Drivers: hv: Simplify data structures for VMBus channel close message
Drivers: hv: util: Cosmetic changes for hv_utils_transport.c
mshv: Add support for a new parent partition configuration
clocksource: hyper-v: Skip unnecessary checks for the root partition
hyperv: Add missing field to hv_output_map_device_interrupt
Add bounds checking to prevent writes past framebuffer boundaries when
rendering text near screen edges. Return early if the Y position is off-screen
and clip image height to screen boundary. Break from the rendering loop if the
X position is off-screen. When clipping image width to fit the screen, update
the character count to match the clipped width to prevent buffer size
mismatches.
Without the character count update, bit_putcs_aligned and bit_putcs_unaligned
receive mismatched parameters where the buffer is allocated for the clipped
width but cnt reflects the original larger count, causing out-of-bounds writes.
Reported-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48b0652a95834717f190
Suggested-by: Helge Deller <deller@gmx.de>
Tested-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
- The 3 patch series "ida: Remove the ida_simple_xxx() API" from
Christophe Jaillet completes the removal of this legacy IDR API.
- The 9 patch series "panic: introduce panic status function family"
from Jinchao Wang provides a number of cleanups to the panic code and
its various helpers, which were rather ad-hoc and scattered all over the
place.
- The 5 patch series "tools/delaytop: implement real-time keyboard
interaction support" from Fan Yu adds a few nice user-facing usability
changes to the delaytop monitoring tool.
- The 3 patch series "efi: Fix EFI boot with kexec handover (KHO)" from
Evangelos Petrongonas fixes a panic which was happening with the
combination of EFI and KHO.
- The 2 patch series "Squashfs: performance improvement and a sanity
check" from Phillip Lougher teaches squashfs's lseek() about
SEEK_DATA/SEEK_HOLE. A mere 150x speedup was measured for a well-chosen
microbenchmark.
- Plus another 50-odd singleton patches all over the place.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN78zwAKCRDdBJ7gKXxA
jhLeAQCddTv0XtSUTrvBvmrJVUBrQQeJc+LtNopMIjfAF/WAWAEAogSVKxg+HHEB
GaVixx4zDriNzEqrqiCx9rm4l+YooQA=
=XRe0
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet
completes the removal of this legacy IDR API
- "panic: introduce panic status function family" from Jinchao Wang
provides a number of cleanups to the panic code and its various
helpers, which were rather ad-hoc and scattered all over the place
- "tools/delaytop: implement real-time keyboard interaction support"
from Fan Yu adds a few nice user-facing usability changes to the
delaytop monitoring tool
- "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos
Petrongonas fixes a panic which was happening with the combination of
EFI and KHO
- "Squashfs: performance improvement and a sanity check" from Phillip
Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere
150x speedup was measured for a well-chosen microbenchmark
- plus another 50-odd singleton patches all over the place
* tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits)
Squashfs: reject negative file sizes in squashfs_read_inode()
kallsyms: use kmalloc_array() instead of kmalloc()
MAINTAINERS: update Sibi Sankar's email address
Squashfs: add SEEK_DATA/SEEK_HOLE support
Squashfs: add additional inode sanity checking
lib/genalloc: fix device leak in of_gen_pool_get()
panic: remove CONFIG_PANIC_ON_OOPS_VALUE
ocfs2: fix double free in user_cluster_connect()
checkpatch: suppress strscpy warnings for userspace tools
cramfs: fix incorrect physical page address calculation
kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit
Squashfs: fix uninit-value in squashfs_get_parent
kho: only fill kimage if KHO is finalized
ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name()
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock
coccinelle: platform_no_drv_owner: handle also built-in drivers
coccinelle: of_table: handle SPI device ID tables
lib/decompress: use designated initializers for struct compress_format
efi: support booting with kexec handover (KHO)
...
The Hyper-V DRM driver is available since kernel version 5.14 and it
provides full KMS support and fbdev emulation via the DRM fbdev helpers.
Deprecate this driver in favor of Hyper-V DRM driver.
Signed-off-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
LCD_CLASS_DEVICE is the user-controlled option that enables the LCD
display subsystem. Do not select it from fbdev drivers. Selecting it
from drivers can lead to cyclic dependencies within the config.
Some guidelines for using select can be found in the kernel docs at [1].
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.16/source/Documentation/kbuild/kconfig-language.rst#L147 # [1]
Signed-off-by: Helge Deller <deller@gmx.de>
The product page referenced in the FB_RADEON is no longer valid.
Remove it to avoid pointing to an invalid link.
Signed-off-by: Sukrut Heroorkar <hsukrut3@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
At present VMBus driver is hinged off of CONFIG_HYPERV which entails
lot of builtin code and encompasses too much. It's not always clear
what depends on builtin hv code and what depends on VMBus. Setting
CONFIG_HYPERV as a module and fudging the Makefile to switch to builtin
adds even more confusion. VMBus is an independent module and should have
its own config option. Also, there are scenarios like baremetal dom0/root
where support is built in with CONFIG_HYPERV but without VMBus. Lastly,
there are more features coming down that use CONFIG_HYPERV and add more
dependencies on it.
So, create a fine grained HYPERV_VMBUS option and update Kconfigs for
dependency on VMBus.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Signed-off-by: Wei Liu <wei.liu@kernel.org>
There are systems which want to wait for as long as it takes for the
stopped video memory to answer. Mapping it out helps to avoid that
while the system is running but standby still hangs somehow. So just
leave the memory on in standby same as it was before my change.
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Change the 'ret' variable in of_platform_mb862xx_probe() from unsigned long
to int, as it needs to store either negative error codes or zero.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but can be confusing. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
It could be triggered on 32 bit big endian machines at 32 bpp in the
pattern realignment. In this case just return early as the result is
an identity.
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
With the right setup S3 cards can display 1 and 2 BPP packed pixel
modes, even in high resolutions. So this patch makes them available.
The 4 BPP packed pixel mode had one pixel column of garbage on the
left side due to how the shift register works, this is fixed now.
There was a limitation that only 8 pixel wide fonts could be used at 4
BPP. Since the CFB routines were updated to handle reverse pixel
ordering correctly that limitation doesn't exists and was removed now.
In 4 BPP interleaved planes mode font widths of multiply of 8 are
accepted now, not just 8 pixels.
The horizontal screen position will not move as much between modes as it
used to. That was caused by the various amount of pipeline delay which
is compensated now as much as possible.
While adjusting the code direct port access of PEL registers was
corrected. Should work now on systems where these are memory mapped.
I've noticed that when in 1 BPP mode the console is used with Unicode
fonts erasing might be done with non-blanks. That's a bug in the VT code
and so not part of this patch.
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
This patch implements power saving for S3 cards by powering down the
RAMDAC and stopping MCLK and DCLK while the card is supposed to be
suspended.
The RAMDAC is also disabled while the screen is blanked and the DCLK
in stopped while in DPMS power off.
The practical difference it makes is that on a machine with such a
card the display will be placed in DPMS power off while standby is
activated (due to stopped DCLK). Same like when using other cards with
implemented power saving functionality.
Without it on my setup the connected display powers up and stays that
way showing VT63 while in standby. Sort of annoying as before standby
it's specifically placed into DPMS off in Xorg for a while.
The used functionality should exists for sure on Trio32 to Aurora64V
(according to the documentation) so I think it's generally applicable.
I'm using this on S3 Trio 3D and S3 Virge DX.
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Use vmalloc_array() instead of vmalloc() to simplify the function
xenfb_probe().
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Make sure the headers are sorted alphabetically to ensure consistent
code.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250623-simple-drm-fb-icc-v2-4-f69b86cd3d7d@fairphone.com
Several fbdev drivers select FB_MODE_HELPER in the Kconfig. The
setting controls some helper functions and has no meaning to the
user. Make it an internal option.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250909132047.152612-3-tzimmermann@suse.de
The option CONFIG_FB_TILEBLITTING is controlled by the user. Selecting
it from drivers can lead to cyclic dependencies within the config. In
fbcon, there's special handling for tile blitting, which currently
cannot be disabled without first disabling the relevant fbdev drivers.
Fix the Kconfig dependency to make it work.
Some guidelines for using select can be found in the kernel docs at [1].
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.16/source/Documentation/kbuild/kconfig-language.rst#L147 # [1]
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250909132047.152612-2-tzimmermann@suse.de
Commit 1a194e6c8e ("fbcon: fix integer overflow in fbcon_do_set_font")
introduced an out-of-bounds access by storing data and allocation sizes
in the same variable. Restore the old size calculation and use the new
variable 'alloc_size' for the allocation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 1a194e6c8e ("fbcon: fix integer overflow in fbcon_do_set_font")
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15020
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6201
Cc: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: George Kennedy <george.kennedy@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Qianqiang Liu <qianqiang.liu@163.com>
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org> # v5.9+
Cc: Zsolt Kajtar <soci@c64.rulez.org>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Qianqiang Liu <qianqiang.liu@163.com>
Link: https://lore.kernel.org/r/20250922134619.257684-1-tzimmermann@suse.de
Fix integer overflow vulnerabilities in fbcon_do_set_font() where font
size calculations could overflow when handling user-controlled font
parameters.
The vulnerabilities occur when:
1. CALC_FONTSZ(h, pitch, charcount) performs h * pith * charcount
multiplication with user-controlled values that can overflow.
2. FONT_EXTRA_WORDS * sizeof(int) + size addition can also overflow
3. This results in smaller allocations than expected, leading to buffer
overflows during font data copying.
Add explicit overflow checking using check_mul_overflow() and
check_add_overflow() kernel helpers to safety validate all size
calculations before allocation.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 39b3cffb8c ("fbcon: prevent user font height or width change from causing potential out-of-bounds access")
Cc: George Kennedy <george.kennedy@oracle.com>
Cc: stable <stable@vger.kernel.org>
Cc: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Qianqiang Liu <qianqiang.liu@163.com>
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250912170023.3931881-1-samasth.norway.ananda@oracle.com
Support for console rotation is somewhat bolted onto the helper
fbcon_set_bitops() for unrotated displays.
Update fbcon_set_bitops() with a switch statement that picks the
correct settings helper for the current rotation. For unrotated
consoles, set the bitops for in the new helper fbcon_set_bitops_ur().
Rename the other, existing helpers to match the common naming
scheme.
The old helper fbcon_set_rotate() is no longer used.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20250909124616.143365-6-tzimmermann@suse.de
Depending on rotation settings, fbcon sets different callback
functions in struct fbcon_par from within fbcon_set_bitops(). Declare
the callback functions in the new type struct fbcon_bitops. Then
only replace the single bitops pointer in struct fbcon_par.
Keeping callbacks in constant instances of struct fbcon_bitops
makes it harder to exploit the callbacks. Also makes the code slightly
easier to maintain.
For tile-based consoles, there's a separate instance of the bitops
structure.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20250909124616.143365-5-tzimmermann@suse.de
The field struct fbcon_par.rotate_font points to fbcon_rotate_font() if
the console is rotated. Set the callback in the same place as the other
callbacks. Prepares for declaring all fbcon callbacks in a dedicated
struct type.
If not rotated, fbcon_set_bitops() still clears the callback to NULL.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20250909124616.143365-4-tzimmermann@suse.de
The type struct fbcon_ops contains fbcon state and callbacks. As the
callbacks will be removed from struct fbcon_ops, rename the data type
to struct fbcon_par. Also rename the variables from ops to par.
The _par postfix ("private access registers") is used throughout the
fbdev subsystem for per-driver state. The fbcon pointer within struct
fb_info is also named fbcon_par. Hence, the new naming fits existing
practice.
v2:
- rename struct fbcon_ops to struct fbcon_par
- fix build for CONFIG_FB_TILEBITTING=n (kernel test robot)
- fix indention
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20250909124616.143365-3-tzimmermann@suse.de
Update the fbcon_skip_panic() function to use the panic_in_progress()
helper.
The previous direct access to panic_cpu is less readable and is being
replaced by a dedicated function that more clearly expresses the intent.
This change is part of a series to refactor the kernel's panic handling
logic for better clarity and robustness.
Link: https://lkml.kernel.org/r/20250825022947.1596226-3-wangjinchao600@gmail.com
Signed-off-by: Jinchao Wang <wangjinchao600@gmail.com>
Acked-by Qianqiang Liu <qianqiang.liu@163.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kees Cook <kees@kernel.org>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Luo Gengkun <luogengkun@huaweicloud.com>
Cc: Max Kellermann <max.kellermann@ionos.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: oushixiong <oushixiong@kylinos.cn>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Cc: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Yunhui Cui <cuiyunhui@bytedance.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion
-----BEGIN PGP SIGNATURE-----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=MulZ
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
- Revert a patch which broke VGA console.
- Fix an out-of-bounds access bug which may happen during console
resizing when a console is mapped to a frame buffer.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaJRydwAKCRD3ErUQojoP
Xx6JAP929Q1PbZAbYSc/99dkxmKmfQk7/g7daI5Rl9YHWvvALgD/WFM/kWWIcFFe
T4Z8+v3fa3+vez8w4jH5k9/IY2YU4w8=
=Zr8P
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes for 6.17-rc1:
- Revert a patch which broke VGA console
- Fix an out-of-bounds access bug which may happen during console
resizing when a console is mapped to a frame buffer
* tag 'fbdev-for-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
Revert "vgacon: Add check for vc_origin address range in vgacon_scroll()"
fbdev: Fix vmalloc out-of-bounds write in fast_imageblit
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This issue triggers when a userspace program does an ioctl
FBIOPUT_CON2FBMAP by passing console number and frame buffer number.
Ideally this maps console to frame buffer and updates the screen if
console is visible.
As part of mapping it has to do resize of console according to frame
buffer info. if this resize fails and returns from vc_do_resize() and
continues further. At this point console and new frame buffer are mapped
and sets display vars. Despite failure still it continue to proceed
updating the screen at later stages where vc_data is related to previous
frame buffer and frame buffer info and display vars are mapped to new
frame buffer and eventully leading to out-of-bounds write in
fast_imageblit(). This bheviour is excepted only when fg_console is
equal to requested console which is a visible console and updates screen
with invalid struct references in fbcon_putcs().
Reported-and-tested-by: syzbot+c4b7aa0513823e2ea880@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c4b7aa0513823e2ea880
Signed-off-by: Sravan Kumar Gundu <sravankumarlpu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
non-drm:
rust:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
mtd:
- driver for Intel GPU non-volatile storage
i2c
- designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support
-----BEGIN PGP SIGNATURE-----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=n9MO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
Use 'bool' type where it makes more sense than 'int'.
v2: Rebase due to corrected 'fbcon_cursor_blink' initial value
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Make the code more legible by adding get_{fg,bg}_color()
which hide the obscure 'is_fg' parameter of get_color()
from the caller.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Invert fbcon_is_inactive() into fbcon_is_active(). Much easier
on the poor brain when you don't have to do dobule negations
all over the place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Invert fbcon_cursor_noblink into fbcon_cursor_blink so that:
- it matches the sysfs attribute exactly
- avoids having to do these NOT operations all over the place
- use bool instead of int
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Seems like someone hit 'c' when they meant to hit 'd'.
Signed-off-by: Daniel Palmer <daniel.palmer@sony.com>
Signed-off-by: Helge Deller <deller@gmx.de>
fb_add_videomode() can fail with -ENOMEM when its internal kmalloc() cannot
allocate a struct fb_modelist. If that happens, the modelist stays empty but
the driver continues to register. Add a check for its return value to prevent
poteintial null-ptr-deref, which is similar to the commit 17186f1f90 ("fbdev:
Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var").
Fixes: 1b6c79361b ("video: imxfb: Add DT support")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This patch addresses various coding style issues in `svgalib.c` to improve
readability and better align the code with the Linux kernel's formatting
standards.
The changes primarily consist of:
- Adjusting whitespace around operators and after keywords.
- Standardizing brace placement for control flow statements.
- Removing unnecessary braces on single-statement if/else blocks.
- Deleting extraneous blank lines throughout the file.
These changes are purely stylistic and introduce no functional modifications.
Signed-off-by: Darshan R. <rathod.darshan.0896@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Replace the manual pci_ioremap_wc() call for mapping screen memory with the
device-managed devm_ioremap_wc() variant.
This simplifies the driver's resource management by ensuring the memory is
automatically unmapped when the driver detaches from the device.
Signed-off-by: Giovanni Di Santi <giovanni.disanti.lkl@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Replace the manual ioremap() call for the MMIO registers with the
device-managed devm_ioremap() variant.
This simplifies the driver's resource management by ensuring the memory is
automatically unmapped when the driver detaches from the device.
Signed-off-by: Giovanni Di Santi <giovanni.disanti.lkl@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The kyro framebuffer driver did not request its PCI memory regions,
which could lead to conflicts with other drivers. This change
addresses the task "Request memory regions in all fbdev drivers"
from the file Documentation/gpu/todo.rst.
This is addressed by using the managed device functions pcim_enable_device()
and pcim_request_all_regions(). This simplifies the code by making error
handling and driver removal cleanup automatic for these resources.
Signed-off-by: Giovanni Di Santi <giovanni.disanti.lkl@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
The error handling is a bit different. "memory-region" is optional, so
failed lookup is not an error. But then an error in
of_address_to_resource() is treated as an error. However, that
distinction is not really important. Either the region is available
and usable or it is not. So now, it is just
of_reserved_mem_region_to_resource() which is checked for an error.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The current implementation may lead to buffer overflow when:
1. Unregistration creates NULL gaps in registered_fb[]
2. All array slots become occupied despite num_registered_fb < FB_MAX
3. The registration loop exceeds array bounds
Add boundary check to prevent registered_fb[FB_MAX] access.
Signed-off-by: Yongzhen Zhang <zhangyongzhen@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Now that ARCH=um no longer has IO port accesses, this driver
can no longer build as-is. Make the IO port calls not just
conditional on i386 but also !UML.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The variable was renamed to fbcon_registered_fb, but this comment was
not updated along with the change. Correct it to avoid confusion.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Fixes: efc3acbc10 ("fbcon: Maintain a private array of fb_info")
[sima: Add Fixes: line.]
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250709103438.572309-1-oushixiong1025@163.com
DRM drivers such as efidrm and vesadrm can export firmware EDID
data to userspace. Make the related option CONFIG_FIRMWARE_EDID
available without CONFIG_FB. Make it depend on X86, which is
currently the only architecture providing EDID information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/20250602075537.137759-2-tzimmermann@suse.de
Fix the compile-time warning
drivers/video/fbdev/sis/sis_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
The affected symbols are not used outside of their module. Some of
the symbols are not used anywhere, so remove the functions entirely.
Also remove the related, but unused, define SISFB_HAVE_MALLOC_NEW.
v2:
- remove unused functions (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-13-tzimmermann@suse.de
Fix the compile-time warning
drivers/video/fbdev/pxafb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
The affected symbol is not used anywhere, so remove the function
entirely.
v2:
- remove unused functions (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-12-tzimmermann@suse.de
Fix the compile-time warnings
drivers/video/fbdev/omap2/omapfb/dss/dpi.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/dss/sdi.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: 7d95680d64 ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-10-tzimmermann@suse.de
Fix the compile-time warnings
drivers/video/fbdev/omap2/omapfb/dss/apply.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/display.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dss-of.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dss_features.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/output.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/overlay.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/venc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/vrfb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-9-tzimmermann@suse.de
Fix the compile-time warnings
drivers/video/fbdev/matrox/g450_pll.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_DAC1064.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_Ti3026.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_accel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_base.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_g450.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_misc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-7-tzimmermann@suse.de
Fix the compile-time warning
drivers/video/fbdev/cyber2000fb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
The affected symbols are not used anywhere, so remove the functions
entirely.
v2:
- remove unused functions (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-5-tzimmermann@suse.de
Fix the compile-time warnings
drivers/video/fbdev/core/cfbcopyarea.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbfillrect.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbimgblt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_ddc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_defio.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_io_fops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_sys_fops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbcmap.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbcon.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbmon.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/modedb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/svgalib.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/syscopyarea.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/sysfillrect.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/sysimgblt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/macmodes.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/sbuslib.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/wmt_ge_rops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-3-tzimmermann@suse.de
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
* Framebuffer Subsystem (fbdev):
* The display's blanking status is now tracked in `struct fb_info`
* `framebuffer_alloc()` initializes the blank state to `FB_BLANK_UNBLANK`
* `register_framebuffer()` sets the state to `FB_BLANK_POWERDOWN` if an `fb_blank`
callback exists, ensuring `FB_EVENT_BLANK` listeners correctly see the display
being turned on during the first modeset
* The `FB_EVENT_BLANK` event data now includes both the new and the old blank states
* Qualcomm WLED Backlight:
* Added a NULL check after `devm_kasprintf()` in `wled_configure()` to prevent a
potential NULL pointer dereference if memory allocation fails
* Framebuffer Subsystem (fbdev):
* `fb_blank()` has been reworked to return early on errors, without functional
changes, in preparation for further state tracking improvements
* Fbdev now calls dedicated functions in the backlight subsystems to notify them
of blank state changes, instead of relying on fbdev event notifiers
* For LCDs, fbdev also calls a dedicated function to notify of mode changes
* Backlight Subsystem:
* Implemented fbdev blank state tracking using the (newly enhanced) blank state
information provided directly by `FB_EVENT_BLANK`
* Removed internal blank state tracking fields (`fb_bl_on`) from
`struct backlight_device`
* Moved the handling of blank-state updates into a separate internal helper
function, `backlight_notify_blank()`
* Removed support for fbdev events and replaced it with a dedicated function call
interface (`backlight_notify_blank()` and `backlight_notify_blank_all()`) for
display drivers to update backlight status
* LCD Subsystem:
* Moved the handling of display updates (blank events and mode changes) from
fbdev event notifiers to separate internal helper functions (`lcd_notify_blank`,
`lcd_notify_mode_change`)
* Removed support for fbdev events and replaced it with dedicated function call
interfaces (`lcd_notify_blank_all()`, `lcd_notify_mode_change_all()`)
* The LCD subsystem now maintains its own internal list of LCD devices instead of
relying on fbdev notifiers
* LED Backlight Trigger:
* Moved the handling of blank-state updates into a separate internal helper,
`ledtrig_backlight_notify_blank()`
* Removed support for fbdev events and replaced it with a dedicated function call,
`ledtrig_backlight_blank()`, for fbdev to notify trigger of blank state changes
* The LED backlight trigger now maintains its own internal list of triggers
instead of relying on fbdev notifiers
* Framebuffer Subsystem (fbdev):
* Removed the definitions for the unused fbdev event constants
`FB_EVENT_MODE_CHANGE` and `FB_EVENT_BLANK` from the header file
-----BEGIN PGP SIGNATURE-----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=jhYi
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Framebuffer Subsystem (fbdev):
- The display's blanking status is now tracked in 'struct fb_info'
- 'framebuffer_alloc()' initializes the blank state to FB_BLANK_UNBLANK
- 'register_framebuffer()' sets the state to 'FB_BLANK_POWERDOWN' if
an 'fb_blank' callback exists, ensuring 'FB_EVENT_BLANK' listeners
correctly see the display being turned on during the first modeset
- The 'FB_EVENT_BLANK' event data now includes both the new and the
old blank states
- 'fb_blank()' has been reworked to return early on errors, without
functional changes, in preparation for further state tracking
improvements
- Fbdev now calls dedicated functions in the backlight subsystems to
notify them of blank state changes, instead of relying on fbdev
event notifiers
- For LCDs, fbdev also calls a dedicated function to notify of mode
changes
- Removed the definitions for the unused fbdev event constants
'FB_EVENT_MODE_CHANGE' and 'FB_EVENT_BLANK' from the header file
Backlight Subsystem:
- Implemented fbdev blank state tracking using the (newly enhanced)
blank state information provided directly by 'FB_EVENT_BLANK'
- Removed internal blank state tracking fields ('fb_bl_on') from
'struct backlight_device'
- Moved the handling of blank-state updates into a separate internal
helper function, 'backlight_notify_blank()'
- Removed support for fbdev events and replaced it with a dedicated
function call interface ('backlight_notify_blank()' and
'backlight_notify_blank_all()') for display drivers to update
backlight status
LCD Subsystem:
- Moved the handling of display updates (blank events and mode
changes) from fbdev event notifiers to separate internal helper
functions ('lcd_notify_blank',
'lcd_notify_mode_change')
- Removed support for fbdev events and replaced it with dedicated
function call interfaces ('lcd_notify_blank_all()',
'lcd_notify_mode_change_all()')
- The LCD subsystem now maintains its own internal list of LCD
devices instead of relying on fbdev notifiers
LED Backlight Trigger:
- Moved the handling of blank-state updates into a separate internal
helper, 'ledtrig_backlight_notify_blank()'
- Removed support for fbdev events and replaced it with a dedicated
function call, 'ledtrig_backlight_blank()', for fbdev to notify
trigger of blank state changes
- The LED backlight trigger now maintains its own internal list of
triggers instead of relying on fbdev notifiers
Qualcomm WLED Backlight:
- Added a NULL check after 'devm_kasprintf()' in 'wled_configure()'
to prevent a potential NULL pointer dereference if memory
allocation fails"
* tag 'backlight-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pm8941: Add NULL check in wled_configure()
fbdev: Remove constants of unused events
leds: backlight trigger: Replace fb events with a dedicated function call
leds: backlight trigger: Move blank-state handling into helper
backlight: lcd: Replace fb events with a dedicated function call
backlight: lcd: Move event handling into helpers
backlight: Replace fb events with a dedicated function call
backlight: Move blank-state handling into helper
backlight: Implement fbdev tracking with blank state from event
fbdev: Send old blank state in FB_EVENT_BLANK
fbdev: Track display blanking state
fbdev: Rework fb_blank()
If fb_add_videomode() in fb_set_var() fails to allocate memory for
fb_videomode, later it may lead to a null-ptr dereference in
fb_videomode_to_var(), as the fb_info is registered while not having the
mode in modelist that is expected to be there, i.e. the one that is
described in fb_info->var.
================================================================
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901
Call Trace:
display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929
fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071
resize_screen drivers/tty/vt/vt.c:1176 [inline]
vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263
fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720
fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776
do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128
fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
================================================================
The reason is that fb_info->var is being modified in fb_set_var(), and
then fb_videomode_to_var() is called. If it fails to add the mode to
fb_info->modelist, fb_set_var() returns error, but does not restore the
old value of fb_info->var. Restore fb_info->var on failure the same way
it is done earlier in the function.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
If fb_add_videomode() in do_register_framebuffer() fails to allocate
memory for fb_videomode, it will later lead to a null-ptr dereference in
fb_videomode_to_var(), as the fb_info is registered while not having the
mode in modelist that is expected to be there, i.e. the one that is
described in fb_info->var.
================================================================
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901
Call Trace:
display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929
fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071
resize_screen drivers/tty/vt/vt.c:1176 [inline]
vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263
fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720
fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776
do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128
fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
================================================================
Even though fbcon_init() checks beforehand if fb_match_mode() in
var_to_display() fails, it can not prevent the panic because fbcon_init()
does not return error code. Considering this and the comment in the code
about fb_match_mode() returning NULL - "This should not happen" - it is
better to prevent registering the fb_info if its mode was not set
successfully. Also move fb_add_videomode() closer to the beginning of
do_register_framebuffer() to avoid having to do the cleanup on fail.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000,
cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's
then passed to fb_cvt_hperiod(), where it's used as a divider -- division
by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to
avoid such overflow...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 96fe6a2109 ("[PATCH] fbdev: Add VESA Coordinated Video Timings (CVT) support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
It looks like attempting to write to the "store_modes" sysfs node will
run afoul of unregistered consoles:
UBSAN: array-index-out-of-bounds in drivers/video/fbdev/core/fbcon.c:122:28
index -1 is out of range for type 'fb_info *[32]'
...
fbcon_info_from_console+0x192/0x1a0 drivers/video/fbdev/core/fbcon.c:122
fbcon_new_modelist+0xbf/0x2d0 drivers/video/fbdev/core/fbcon.c:3048
fb_new_modelist+0x328/0x440 drivers/video/fbdev/core/fbmem.c:673
store_modes+0x1c9/0x3e0 drivers/video/fbdev/core/fbsysfs.c:113
dev_attr_store+0x55/0x80 drivers/base/core.c:2439
static struct fb_info *fbcon_registered_fb[FB_MAX];
...
static signed char con2fb_map[MAX_NR_CONSOLES];
...
static struct fb_info *fbcon_info_from_console(int console)
...
return fbcon_registered_fb[con2fb_map[console]];
If con2fb_map contains a -1 things go wrong here. Instead, return NULL,
as callers of fbcon_info_from_console() are trying to compare against
existing "info" pointers, so error handling should kick in correctly.
Reported-by: syzbot+a7d4444e7b6e743572f7@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/679d0a8f.050a0220.163cdc.000c.GAE@google.com/
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct dac_info *" but the returned type will be
"struct ics5342_info *", which has a larger allocation size. This is
by design, as struct ics5342_info contains struct dac_info as its first
member.
(patch slightly modified by Helge Deller)
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The actual length of const string "noaccel" is 7, but the strncmp()
branch in nvidiafb_setup() wrongly hard codes it as 6.
Fix by using actual length 7 as argument of the strncmp().
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
There is a spelling mistake in macro CARMINE_TOTAL_DIPLAY_MEM. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
Remove support for fb events from the led backlight trigger. Provide
the helper ledtrig_backlight_blank() instead. Call it from fbdev to
inform the trigger of changes to a display's blank state.
Fbdev maintains a list of all installed notifiers. Instead of the fbdev
notifiers, maintain an internal list of led backlight triggers.
v3:
- export ledtrig_backlight_blank()
v2:
- maintain global list of led backlight triggers (Lee)
- avoid IS_REACHABLE() in source file (Lee)
- notify on changes to blank state instead of display state
- use lock guards
- initialize led list and list mutex
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-11-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Remove support for fb events from the lcd subsystem. Provide the
helper lcd_notify_blank_all() instead. In fbdev, call
lcd_notify_blank_all() to inform the lcd subsystem of changes
to a display's blank state.
Fbdev maintains a list of all installed notifiers. Instead of fbdev
notifiers, maintain an internal list of lcd devices.
v3:
- export lcd_notify_mode_change_all() (kernel test robot)
v2:
- maintain global list of lcd devices
- avoid IS_REACHABLE() in source file
- use lock guards
- initialize lcd list and list mutex
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250321095517.313713-9-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Remove support for fb events from backlight subsystem. Provide the
helper backlight_notify_blank_all() instead. Also export the existing
helper backlight_notify_blank() to update a single backlight device.
In fbdev, call either helper to inform the backlight subsystem of
changes to a display's blank state. If the framebuffer device has a
specific backlight, only update this one; otherwise update all.
v4:
- protect blacklight declarations with IS_REACHABLE() (kernel test robot)
v3:
- declare empty fb_bl_notify_blank() as static inline (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250321095517.313713-7-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
The event FB_EVENT_BLANK sends the new blank state in the event's
data field. Also send the old state. It's an additional field in the
data array; existing receivers won't notice the difference.
The backlight subsystem currently tracks blank state per display per
backlight. That is not optimal as it ties backlight code to fbdev. A
subsystem should not track internal state of another subsystem. With
both, new and old, blank state in FB_EVENT_BLANK, the backlight code
will not require its own state tracker any longer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-4-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Store the display's blank status in struct fb_info.blank and track
it in fb_blank(). As an extra, the status is now available from the
sysfs blank attribute.
Support for blanking is optional. Therefore framebuffer_alloc()
initializes the state to FB_BLANK_UNBLANK (i.e., the display is
on). If the fb_blank callback has been set, register_framebuffer()
sets the state to FB_BLANK_POWERDOWN. On the first modeset, the
call to fb_blank() will update it to _UNBLANK. This is important,
as listeners to FB_EVENT_BLANK will now see the display being
switched on.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-3-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Reimplement fb_blank() to return early on errors. No functional
changes. Prepares the helper for tracking the blanking state in
struct fb_info.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-2-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Uros Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was founf to be incorrect.
- The 4 patch series "Some cleanup for memcg" from Chen Ridong
implements some relatively monir cleanups for the memcontrol code.
- The 17 patch series "mm: fixes for device-exclusive entries (hmm)"
from David Hildenbrand fixes a boatload of issues which David found then
using device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now succeed.
- The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry
Ahmed remove the z3fold and zbud implementations. They have been
deprecated for half a year and nobody has complained.
- The 5 patch series "mm: further simplify VMA merge operation" from
Lorenzo Stoakes implements numerous simplifications in this area. No
runtime effects are anticipated.
- The 4 patch series "mm/madvise: remove redundant mmap_lock operations
from process_madvise()" from SeongJae Park rationalizes the locking in
the madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The 12 patch series "Tiny cleanup and improvements about SWAP code"
from Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The 2 patch series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak user-visible
output.
- The 2 patch series "mm/damon/paddr: fix large folios access and
schemes handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The 3 patch series "mm/damon/core: fix wrong and/or useless
damos_walk() behaviors" from SeongJae Park fixes a few issues with the
accuracy of kdamond's walking of DAMON regions.
- The 3 patch series "expose mapping wrprotect, fix fb_defio use" from
Lorenzo Stoakes changes the interaction between framebuffer deferred-io
and core MM. No functional changes are anticipated - this is
preparatory work for the future removal of page structure fields.
- The 4 patch series "mm/damon: add support for hugepage_size DAMOS
filter" from Usama Arif adds a DAMOS filter which permits the filtering
by huge page sizes.
- The 4 patch series "mm: permit guard regions for file-backed/shmem
mappings" from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The 4 patch series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping for
pte-mapped large folios.
- The 18 patch series "reimplement per-vma lock as a refcount" from
Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation
fixes and improves" from SeongJae Park does some maintenance work on the
DAMON docs.
- The 27 patch series "hugetlb/CMA improvements for large systems" from
Frank van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped
pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The 19 patch series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The 12 patch series "selftests/mm: Some cleanups from trying to run
them" from Brendan Jackman fixes a pile of unrelated issues which
Brendan encountered while runnimg our selftests.
- The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap"
from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply wasn't
being effective.
- The 5 patch series "mm: cleanups for device-exclusive entries (hmm)"
from David Hildenbrand implements a number of unrelated cleanups in this
code.
- The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman
Khandual implements a number of preparatoty cleanups to the
GENERIC_PTDUMP Kconfig logic.
- The 8 patch series "mm/damon: auto-tune aggregation interval" from
SeongJae Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some
issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did
this in preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The 2 patch series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the code
easier to follow.
- The 3 patch series "page_counter cleanup and size reduction" from
Shakeel Butt cleans up the page_counter code and fixes a size increase
which we accidentally added late last year.
- The 3 patch series "Add a command line option that enables control of
how many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The 3 patch series "Fix calculations in trace_balance_dirty_pages()
for cgwb" from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The 9 patch series "mm/damon: make allow filters after reject filters
useful and intuitive" from SeongJae Park improves the handling of allow
and reject filters. Behaviour is made more consistent and the
documention is updated accordingly.
- The 5 patch series "Switch zswap to object read/write APIs" from Yosry
Ahmed updates zswap to the new object read/write APIs and thus permits
the removal of some legacy code from zpool and zsmalloc.
- The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang
does as it claims.
- The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts"
from Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes
is a preparatoty refactoring and cleanup of the mremap() code.
- The 20 patch series "mm: MM owner tracking for large folios (!hugetlb)
+ CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS
filters based on handling layers" from SeongJae Park adds a couple of
new sysfs directories to ease the management of DAMON/DAMOS filters.
- The 13 patch series "arch, mm: reduce code duplication in mem_init()"
from Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The 13 patch series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The 3 patch series "mm: page_ext: Introduce new iteration API" from
Luiz Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The 8 patch series "Buddy allocator like (or non-uniform) folio split"
from Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios are
generated.
- The 2 patch series "Minimize xa_node allocation during xarry split"
from Zi Yan reduces the number of xarray xa_nodes which are generated
during an xarray split.
- The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The 3 patch series "Add tracepoints for lowmem reserves, watermarks
and totalreserve_pages" from Martin Liu adds some more tracepoints to
the page allocator code.
- The 4 patch series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which SeongJae
observed during his earlier madvise work.
- The 3 patch series "mm/hwpoison: Fix regressions in memory failure
handling" from Shuai Xue addresses two quite serious regressions which
Shuai has observed in the memory-failure implementation.
- The 5 patch series "mm: reliable huge page allocator" from Johannes
Weiner makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The 5 patch series "Minor memcg cleanups & prep for memdescs" from
Matthew Wilcox is preparatory work for the future implementation of
memdescs.
- The 4 patch series "track memory used by balloon drivers" from Nico
Pache introduces a way to track memory used by our various balloon
drivers.
- The 2 patch series "mm/damon: introduce DAMOS filter type for active
pages" from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The 2 patch series "Adding Proactive Memory Reclaim Statistics" from
Hao Jia separates the proactive reclaim statistics from the direct
reclaim statistics.
- The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio"
from Jinjiang Tu fixes our handling of hwpoisoned pages within the
reclaim code.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA
jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF
Ee93qSSLR1BkNdDw+931Pu0mXfbnBw==
=Pn2K
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
Using device_create_with_groups() to simplify creation and removal.
Same as commit 1083a7be45 ("tty: Use static attribute groups for
sysfs entries").
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Added checks for xoffset, yoffset settings.
Incorrect settings of these parameters can lead to errors
in sm501fb_pan_ functions.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5fc404e47b ("[PATCH] fb: SM501 framebuffer driver")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB
of the enum parameter plane.
The value of this parameter is initialized in dss_init_overlays and in the
current state of the code it cannot take this value so it's not a real
problem.
For the purposes of defensive coding it wouldn't be superfluous to check
the parameter value, because some functions down the call stack process
this value correctly and some not.
For example, in dispc_ovl_setup_global_alpha it may lead to buffer
overflow.
Add check for this value.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Value of enum parameter 'plane' is initialized in dss_init_overlays and
cannot take the value OMAP_DSS_WB. Function dispc_ovl_setup_common could
be called with this value of parameter only from dispc_wb_setup, which has
never been used and has been removed in commit 4f55bb0380
("omapfb: Remove unused writeback code"). The code in the if-branch is
unreachable.
Remove unreachable branch.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The original version duplicated more or less the same algorithms for
both system and i/o memory.
In this version the drawing algorithms (copy/fill/blit) are separate
from the memory access (system and i/o). The two parts are getting
combined in the loadable module sources. This also makes it more robust
against wrong memory access type or alignment mistakes as there's no
direct pointer access or arithmetic in the algorithm sources anymore.
Due to liberal use of inlining the compiled result is a single function
in all 6 cases, without unnecessary function calls. Unlike earlier the
use of macros could be minimized as apparently both gcc and clang is
capable now to do the same with inline functions just as well.
What wasn't quite the same in the two variants is the support for pixel
order reversing. This version is capable to do that for both system and
I/O memory, and not only for the latter. As demand for low bits per
pixel modes isn't high there's a configuration option to enable this
separately for the CFB and SYS modules.
The pixel reversing algorithm is different than earlier and was designed
so that it can take advantage of bit order reversing instructions on
architectures which have them. And even for higher bits per pixel modes
like four bpp.
One of the shortcomings of the earlier version was the incomplete
support for foreign endian framebuffers. Now all three drawing
algorithms produce correct output on both endians with native and
foreign framebuffers. This is one of the important differences even if
otherwise the algorithms don't look too different than before.
All three routines work now with aligned native word accesses. As a
consequence blitting isn't limited to 32 bits on 64 bit architectures as
it was before.
The old routines silently assumed that rows are a multiple of the word
size. Due to how the new routines function this isn't a requirement any
more and access will be done aligned regardless. However if the
framebuffer is configured like that then some of the fast paths won't be
available.
As this code is supposed to be running on all supported architectures it
wasn't optimized for a particular one. That doesn't mean I haven't
looked at the disassembly. That's where I noticed that it isn't a good
idea to use the fallback bitreversing code for example.
The low bits per pixel modes should be faster than before as the new
routines can blit 4 pixels at a time.
On the higher bits per pixel modes I retained the specialized aligned
routines so it should be more or less the same, except on 64 bit
architectures. There the blitting word size is double now which means 32
BPP isn't done a single pixel a time now.
The code was tested on x86, amd64, mips32 and mips64. The latter two in
big endian configuration. Originally thought I can get away with the
first two, but with such bit twisting code byte ordering is tricky and
not really possible to get right without actually verifying it.
While writing such routines isn't rocket science a lot of time was spent
on making sure that pixel ordering, foreign byte order, various bits per
pixels, cpu endianness and word size will give the expected result in
all sorts of combinations without making it overly complicated or full
with special cases.
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
[WHY]
1. The driver forgot to call device_remove_file()
in sh_mobile_lcdc_overlay_fb_unregister(), and there was
no error handling when calling device_create_file() failed.
2. This should probably use device_add_group() instead of
individual files to simplify both creation and removal. [Arnd]
3. The driver core can register and cleanup sysfs groups already.
as commit 95cdd538e0 ("fbdev: efifb: Register sysfs groups
through driver core").
[HOW]
Register sysfs groups through driver core.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “au1100fb_setmode”.
This issue was detected by using the Coccinelle software.
Fixes: 3b495f2bb7 ("Au1100 FB driver uplift for 2.6.")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Convert to use devm_kmemdup() and devm_kmemdup_array() which are
more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The erase colour calculation for fbcon clearing should use get_color instead
of attr_col_ec, like everything else. The latter is similar but is not correct.
For example it's missing the depth dependent remapping and doesn't care about
blanking.
The problem can be reproduced by setting up the background colour to grey
(vt.color=0x70) and having an fbcon console set to 2bpp (4 shades of gray).
Now the background attribute should be 1 (dark gray) on the console.
If the screen is scrolled when pressing enter in a shell prompt at the bottom
line then the new line is cleared using colour 7 instead of 1. That's not
something fillrect likes (at 2bbp it expect 0-3) so the result is interesting.
This patch switches to get_color with vc_video_erase_char to determine the
erase colour from attr_col_ec. That makes the latter function redundant as
no other users were left.
Use correct erase colour for clearing in fbcon
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
I was wondering why there's garbage at the bottom of the screen when
tile blitting is used with an odd mode like 1080, 600 or 200. Sure there's
only space for half a tile but the same area is clean when the buffer
is bitmap.
Then later I found that it's supposed to be cleaned but that's not
implemented. So I took what's in bitblit and adapted it for tileblit.
This implementation was tested for both the horizontal and vertical case,
and now does the same as what's done for bitmap buffers.
If anyone is interested to reproduce the problem then I could bet that'd
be on a S3 or Ark. Just set up a mode with an odd line count and make
sure that the virtual size covers the complete tile at the bottom. E.g.
for 600 lines that's 608 virtual lines for a 16 tall tile. Then the
bottom area should be cleaned.
For the right side it's more difficult as there the drivers won't let an
odd size happen, unless the code is modified. But once it reports back a
few pixel columns short then fbcon won't use the last column. With the
patch that column is now clean.
Btw. the virtual size should be rounded up by the driver for both axes
(not only the horizontal) so that it's dividable by the tile size.
That's a driver bug but correcting it is not in scope for this patch.
Implement missing margin clearing for tileblit
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
With the introduction of mapping_wrprotect_range() there is no need to use
folio_mkclean() in order to write-protect mappings of frame buffer pages,
and therefore no need to inappropriately set kernel-allocated page->index,
mapping fields to permit this operation.
Instead, store the pointer to the page cache object for the mapped driver
in the fb_deferred_io object, and use the already stored page offset from
the pageref object to look up mappings in order to write-protect them.
This is justified, as for the page objects to store a mapping pointer at
the point of assignment of pages, they must all reference the same
underlying address_space object. Since the life time of the pagerefs is
also the lifetime of the fb_deferred_io object, storing the pointer here
makes sense.
This eliminates the need for all of the logic around setting and
maintaining page->index,mapping which we remove.
This eliminates the use of folio_mkclean() entirely but otherwise should
have no functional change.
[lorenzo.stoakes@oracle.com: fixup unused variable warnings]
Link: https://lkml.kernel.org/r/d4018405-2762-4385-a816-e54cc23839ac@lucifer.local
Link: https://lkml.kernel.org/r/81171ab16c14e3df28f6de9d14982cee528d8519.1739029358.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Kajtar Zsolt <soci@c64.rulez.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to
release the framebuffer forcefully. If this framebuffer is in use it
produce the following WARN and hence this framebuffer is never released.
[ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40
< snip >
[ 44.111289] Call Trace:
[ 44.111290] <TASK>
[ 44.111291] ? show_regs+0x6c/0x80
[ 44.111295] ? __warn+0x8d/0x150
[ 44.111298] ? framebuffer_release+0x2c/0x40
[ 44.111300] ? report_bug+0x182/0x1b0
[ 44.111303] ? handle_bug+0x6e/0xb0
[ 44.111306] ? exc_invalid_op+0x18/0x80
[ 44.111308] ? asm_exc_invalid_op+0x1b/0x20
[ 44.111311] ? framebuffer_release+0x2c/0x40
[ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb]
[ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus]
[ 44.111323] device_remove+0x40/0x80
[ 44.111325] device_release_driver_internal+0x20b/0x270
[ 44.111327] ? bus_find_device+0xb3/0xf0
Fix this by moving the release of framebuffer and assosiated memory
to fb_ops.fb_destroy function, so that framebuffer framework handles
it gracefully.
While we fix this, also replace manual registrations/unregistration of
framebuffer with devm_register_framebuffer.
Fixes: 68a2d20b79 ("drivers/video: add Hyper-V Synthetic Video Frame Buffer Driver")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740845791-19977-3-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740845791-19977-3-git-send-email-ssengar@linux.microsoft.com>
The device object required in 'hvfb_release_phymem' function
for 'dma_free_coherent' can also be obtained from the 'info'
pointer, making 'hdev' parameter in 'hvfb_putmem' redundant.
Remove the unnecessary 'hdev' argument from 'hvfb_putmem'.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740845791-19977-2-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740845791-19977-2-git-send-email-ssengar@linux.microsoft.com>
Gen 2 Hyper-V VMs boot via EFI and have a standard EFI framebuffer
device. When the kdump kernel runs in such a VM, loading the efifb
driver may hang because of accessing the framebuffer at the wrong
memory address.
The scenario occurs when the hyperv_fb driver in the original kernel
moves the framebuffer to a different MMIO address because of conflicts
with an already-running efifb or simplefb driver. The hyperv_fb driver
then informs Hyper-V of the change, which is allowed by the Hyper-V FB
VMBus device protocol. However, when the kexec command loads the kdump
kernel into crash memory via the kexec_file_load() system call, the
system call doesn't know the framebuffer has moved, and it sets up the
kdump screen_info using the original framebuffer address. The transition
to the kdump kernel does not go through the Hyper-V host, so Hyper-V
does not reset the framebuffer address like it would do on a reboot.
When efifb tries to run, it accesses a non-existent framebuffer
address, which traps to the Hyper-V host. After many such accesses,
the Hyper-V host thinks the guest is being malicious, and throttles
the guest to the point that it runs very slowly or appears to have hung.
When the kdump kernel is loaded into crash memory via the kexec_load()
system call, the problem does not occur. In this case, the kexec command
builds the screen_info table itself in user space from data returned
by the FBIOGET_FSCREENINFO ioctl against /dev/fb0, which gives it the
new framebuffer location.
This problem was originally reported in 2020 [1], resulting in commit
3cb73bc3fa ("hyperv_fb: Update screen_info after removing old
framebuffer"). This commit solved the problem by setting orig_video_isVGA
to 0, so the kdump kernel was unaware of the EFI framebuffer. The efifb
driver did not try to load, and no hang occurred. But in 2024, commit
c25a19afb8 ("fbdev/hyperv_fb: Do not clear global screen_info")
effectively reverted 3cb73bc3fa. Commit c25a19afb8 has no reference
to 3cb73bc3fa, so perhaps it was done without knowing the implications
that were reported with 3cb73bc3fa. In any case, as of commit
c25a19afb8, the original problem came back again.
Interestingly, the hyperv_drm driver does not have this problem because
it never moves the framebuffer. The difference is that the hyperv_drm
driver removes any conflicting framebuffers *before* allocating an MMIO
address, while the hyperv_fb drivers removes conflicting framebuffers
*after* allocating an MMIO address. With the "after" ordering, hyperv_fb
may encounter a conflict and move the framebuffer to a different MMIO
address. But the conflict is essentially bogus because it is removed
a few lines of code later.
Rather than fix the problem with the approach from 2020 in commit
3cb73bc3fa, instead slightly reorder the steps in hyperv_fb so
conflicting framebuffers are removed before allocating an MMIO address.
Then the default framebuffer MMIO address should always be available, and
there's never any confusion about which framebuffer address the kdump
kernel should use -- it's always the original address provided by
the Hyper-V host. This approach is already used by the hyperv_drm
driver, and is consistent with the usage guidelines at the head of
the module with the function aperture_remove_conflicting_devices().
This approach also solves a related minor problem when kexec_load()
is used to load the kdump kernel. With current code, unbinding and
rebinding the hyperv_fb driver could result in the framebuffer moving
back to the default framebuffer address, because on the rebind there
are no conflicts. If such a move is done after the kdump kernel is
loaded with the new framebuffer address, at kdump time it could again
have the wrong address.
This problem and fix are described in terms of the kdump kernel, but
it can also occur with any kernel started via kexec.
See extensive discussion of the problem and solution at [2].
[1] https://lore.kernel.org/linux-hyperv/20201014092429.1415040-1-kasong@redhat.com/
[2] https://lore.kernel.org/linux-hyperv/BLAPR10MB521793485093FDB448F7B2E5FDE92@BLAPR10MB5217.namprd10.prod.outlook.com/
Reported-by: Thomas Tai <thomas.tai@oracle.com>
Fixes: c25a19afb8 ("fbdev/hyperv_fb: Do not clear global screen_info")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250218230130.3207-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250218230130.3207-1-mhklinux@outlook.com>
When a Hyper-V framebuffer device is removed, or the driver is unbound
from a device, any allocated and/or mapped memory must be released. In
particular, MMIO address space that was mapped to the framebuffer must
be unmapped. Current code unmaps the wrong address, resulting in an
error like:
[ 4093.980597] iounmap: bad address 00000000c936c05c
followed by a stack dump.
Commit d21987d709 ("video: hyperv: hyperv_fb: Support deferred IO for
Hyper-V frame buffer driver") changed the kind of address stored in
info->screen_base, and the iounmap() call in hvfb_putmem() was not
updated accordingly.
Fix this by updating hvfb_putmem() to unmap the correct address.
Fixes: d21987d709 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250209235252.2987-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250209235252.2987-1-mhklinux@outlook.com>
Fixes:
- omap: use threaded IRQ for LCD DMA
- omapfb: Fix an OF node leak in dss_of_port_get_parent_device()
- vga16fb: fix orig_video_isVGA confusion
Updates & cleanups:
- hdmi: Remove unused hdmi_infoframe_check
- omapfb: Remove unused hdmi5_core_handle_irqs
- omapfb: Use of_property_present() to test existence of DT property
- omapfb: Use syscon_regmap_lookup_by_phandle_args
- efifb: Change the return value type to void
- lcdcfb: Use backlight helper
- udlfb: Use const 'struct bin_attribute' callback
- radeon: Use const 'struct bin_attribute' callbacks
- sm501fb: Use str_enabled_disabled() helper in sm501fb_init_fb()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5JCzAAKCRD3ErUQojoP
X30VAQDHzOIHbxuVfLpiXKfqCGlQgldEIpq7ckxIdh+8Oz3qrgD9G5fuAI4Y6BTN
8ReqS4SP7L9sO3jar/h+b26qFw9rKgY=
=frdX
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Fixes:
- omap: use threaded IRQ for LCD DMA
- omapfb: Fix an OF node leak in dss_of_port_get_parent_device()
- vga16fb: fix orig_video_isVGA confusion
Updates & cleanups:
- hdmi: Remove unused hdmi_infoframe_check
- omapfb:
- Remove unused hdmi5_core_handle_irqs
- Use of_property_present() to test existence of DT property
- Use syscon_regmap_lookup_by_phandle_args
- efifb: Change the return value type to void
- lcdcfb: Use backlight helper
- udlfb: Use const 'struct bin_attribute' callback
- radeon: Use const 'struct bin_attribute' callbacks
- sm501fb: Use str_enabled_disabled() helper in sm501fb_init_fb()"
* tag 'fbdev-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: lcdcfb: Use backlight helper
fbdev: vga16fb: fix orig_video_isVGA confusion
fbdev: omapfb: Use syscon_regmap_lookup_by_phandle_args
fbdev: omapfb: Use of_property_present() to test existence of DT property
fbdev: sm501fb: Use str_enabled_disabled() helper in sm501fb_init_fb()
fbdev: omap: use threaded IRQ for LCD DMA
fbdev: omapfb: Fix an OF node leak in dss_of_port_get_parent_device()
fbdev: efifb: Change the return value type to void
fbdev: omapfb: Remove unused hdmi5_core_handle_irqs
video: hdmi: Remove unused hdmi_infoframe_check
fbdev: radeon: Use const 'struct bin_attribute' callbacks
fbdev: udlfb: Use const 'struct bin_attribute' callback
At some point the orig_video_isVGA field of screen_info was repurposed
for video type. Using it directly for video type check is unsafe as it can
still mean yes (1) or no-output (0) in certain configurations. I had one of those.
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data. Dtschema and Devicetree bindings offer the
static/build-time check for this already.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
