Remove duplicate inclusion of linux/module.h in fb_defio.c to clean up
redundant code.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
The driver calls ioremap() on the HGA video memory at 0xb0000 without
first reserving the physical address range. This leaves the kernel
resource tree incomplete and can cause silent conflicts with other
drivers claiming the same range.
Add a devm_request_mem_region() call before ioremap() in
hga_card_detect() to reserve the memory region.
Signed-off-by: Hardik Phalet <hardik.phalet@pm.me>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Use devm_platform_get_and_ioremap_resource() for resource 0 (the MMIO
control register range) instead of open-coding platform_get_resource()
and devm_ioremap() separately. The helper requests the memory region
before mapping it, which registers the range in /proc/iomem and prevents
another driver from mapping the same registers.
This makes resource 0 consistent with resource 1 (the framebuffer),
which already uses devm_platform_get_and_ioremap_resource().
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Amit Barzilai <amit.barzilai22@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Use devm_platform_get_and_ioremap_resource() instead of open-coding
platform_get_resource() and devm_ioremap() separately. The helper
requests the memory region before mapping it, which registers the range
in /proc/iomem and prevents another driver from mapping the same
registers.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Amit Barzilai <amit.barzilai22@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
When CONFIG_FB_SAVAGE_I2C is enabled, savagefb_probe() can build both an
EDID-derived monspecs.modedb and a modelist from it before later failing.
The normal success path frees monspecs.modedb after the initial mode selection,
but the probe error path only deletes the I2C busses and misses the
EDID-derived allocations.
Free both the modelist and monspecs.modedb on the failed: unwind path.
Co-developed-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Co-developed-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
offb_init_nodriver() gets a referenced PCI device with pci_get_device().
If pci_enable_device() fails, the function returns without dropping that
reference.
Release the PCI device reference before returning from the
pci_enable_device() failure path.
Fixes: 5bda8f7b54 ("video: fbdev: offb: Call pci_enable_device() before using the PCI VGA device")
Co-developed-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Co-developed-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Much like commit 19f953e743 ("fbdev: fb_pm2fb: Avoid potential divide
by zero error"), we also need to prevent that same crash from happening
in the udlfb driver as it uses pixclock directly when dividing, which
will crash.
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Helge Deller <deller@gmx.de>
Fixes: 59277b679f ("Staging: udlfb: add dynamic modeset support")
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Much like commit 19f953e743 ("fbdev: fb_pm2fb: Avoid potential divide
by zero error"), we also need to prevent that same crash from happening
in the udlfb driver as it uses pixclock directly when dividing, which
will crash.
Cc: Helge Deller <deller@gmx.de>
Assisted-by: gregkh_clanker_t1000
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Fix the warning about inconsistent returns for '&rg->lock' in
omapfb_mmap() function. The warning arises because the error path
uses 'ofbi->region' while the normal path uses 'rg'.
smatch warnings:
drivers/video/fbdev/omap2/omapfb/omapfb-main.c:1126 omapfb_mmap()
warn: inconsistent returns '&rg->lock'.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Move all temporary state of the font-rotation code into the struct
rotated in struct fbcon_par. Protect it with the Kconfig symbol
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION. Avoids mixing it up with fbcon's
regular state.
v2:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Fbcon creates a cursor shape on the fly from the user-configured
settings. The logic to create a glyph with the cursor's bitmap mask
is duplicated in four places. In the cases that involve console
rotation, the implementation further rotates the cursor glyph for
displaying.
Consolidate all cursor-mask creation in a single helper. Update the
callers accordingly. For console rotation, use the glyph helpers to
rotate the created cursor glyph to the correct orientation.
v2:
- fix sparse truncated-bits warning
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Move the core of fbcon's font-rotation code to the font library as
the new helper font_data_rotate(). The code can rotate in steps of
90°. For completeness, it also copies the glyph data for multiples
of 360°.
Bring back the memset optimization. A memset to 0 again clears the
whole glyph output buffer. Then use the internal rotation helpers on
the cleared output. Fbcon's original implementation worked like this,
but lost it during refactoring.
Replace fbcon's font-rotation code with the new implementations.
All that's left to do for fbcon is to maintain its internal fbcon
state.
v2:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Move the glyph rotation helpers from fbcon to the font library. Wrap them
behind clean interfaces. Also clear the output memory to zero. Previously,
the implementation relied on the caller to do that.
Go through the fbcon code and callers of the glyph-rotation helpers. In
addition to the font rotation, there's also the cursor code, which uses
the rotation helpers.
The font-rotation relied on a single memset to zero for the whole font.
This is now multiple memsets on each glyph. This will be sorted out when
the font library also implements font rotation.
Building glyph rotation in the font library still depends on
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y. If we get more users of the code,
we can still add a dedicated Kconfig symbol to the font library.
No changes have been made to the actual implementation of the rotate_*()
and pattern_*() functions. These will be refactored as separate changes.
v2:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Implement pitch and size calculation for a single font glyph in the
new helpers font_glyph_pitch() and font_glyph_size(). Replace the
instances where the calculations are open-coded.
Note that in the case of fbcon console rotation, the parameters for
a glyph's width and height might be reversed. This is intentional.
v2:
- fix typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Clear the font buffer if the reallocation during console rotation fails
in fbcon_rotate_font(). The putcs implementations for the rotated buffer
will return early in this case. See [1] for an example.
Currently, fbcon_rotate_font() keeps the old buffer, which is too small
for the rotated font. Printing to the rotated console with a high-enough
character code will overflow the font buffer.
v2:
- fix typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6cc50e1c5b ("[PATCH] fbcon: Console Rotation - Add support to rotate font bitmap")
Cc: stable@vger.kernel.org # v2.6.15+
Link: https://elixir.bootlin.com/linux/v6.19/source/drivers/video/fbdev/core/fbcon_ccw.c#L144 # [1]
Signed-off-by: Helge Deller <deller@gmx.de>
With clang and W=1:
drivers/video/fbdev/aty/atyfb_base.c:2327:24: warning: variable 'fb_list' set but not used [-Wunused-but-set-global]
2327 | static struct fb_info *fb_list = NULL;
Indeed, the last user of fb_list was removed in 2004, while the actual
linked list was removed in 2002.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603300931.osMYxYZ7-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Clang is not happy about set but unused variable:
drivers/video/fbdev/matrox/g450_pll.c:412:18: error: variable 'mnp' set but not used
412 | unsigned int mnp;
| ^
1 error generated.
Since the commit 7b987887f9 ("video: fbdev: matroxfb: remove dead code
and set but not used variable") the 'mnp' became unused, but eliminating
that code might have side-effects. The question here is what should we do
with 'mnp'? The easiest way out is just mark it with __maybe_unused which
will shut the compiler up and won't change any possible IO flow. So does
this change.
A dive into the history of the driver:
The problem was revealed when the #if 0 guarded code along with unused
pixel_vco variable was removed. That code was introduced in the original
commit 213d22146d1f ("[PATCH] (1/3) matroxfb for 2.5.3"). And then guarded
in the commit 705e41f82988 ("matroxfb DVI updates: Handle DVI output on
G450/G550. Powerdown unused portions of G450/G550 DAC. Split G450/G550 DAC
from older DAC1064 handling. Modify PLL setting when both CRTCs use same
pixel clocks.").
NOTE: The two commits mentioned above pre-date Git era and available in
history.git repository for archaeological purposes.
Even without that guard the modern compilers may see that the pixel_vco
wasn't ever used and seems a leftover after some debug or review made
25 years ago.
The g450_mnp2vco() doesn't have any IO and as Jason said doesn't seem
to have any side effects either than some unneeded CPU processing during
runtime. I agree that's unlikely that timeout (or heating up the CPU) has
any effect on the HW (GPU/display) functionality.
Fixes: 7b987887f9 ("video: fbdev: matroxfb: remove dead code and set but not used variable")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The help text for CONFIG_FB_NVIDIA refers to obsolete hardware and
incorrect default behaviour. This patch updates the description to
reflect the current state of the driver and supported devices.
Signed-off-by: robgithub <rob.github@jumpstation.co.uk>
Signed-off-by: Helge Deller <deller@gmx.de>
The hwa742_init() function did not check the return value of clk_get().
This could lead to dereferencing an error pointer in subsequent clock
operations, potentially causing a kernel crash.
Fix this by adding a missing error check and ensuring proper clock
resource cleanup on failure and driver removal.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
The function viafb_lcd_get_mobile_state() calls ioremap() without
checking the return value. If ioremap() fails (returns NULL), the
subsequent readw() will cause a NULL pointer dereference.
Signed-off-by: Wang Jun <1742789905@qq.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Add font_data_export() and update consoles to use it.
The helper font_data_export() is based on code in fbcon_get_font().
It extends the size of a single glyph to match the requested vpitch,
which us usually 32 bytes for fonts from user space. Internal fonts
have a pitch according to the glyph's height.
The implementation of font_data_export() differs in several ways from
the original code. The original implementation distinguished between
different pitches of the font data. This is not necessary as the pitch
is a parameter in the copying.
There was also special handling for a font pitch of 3 bytes, which got
expanded to 4 bytes (with trailing bits on each scanline). The logic
originated from long before git history exists even in the historical
tree. So it is not clear why this was implemented. It is not what user
space expects. The setfont utitlity loads font with 3-bytes pitches and
expects to read such fonts with a 3-byte pitch. For any font width, the
font pitch is always the width extended to the next multiple of 8. See
[1] for the user-space font-reading code.
With the changes to handling the font pitches, font_data_export() replaces
the original code's various special cases with a single copying logic.
v3:
- fix typos (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://github.com/legionus/kbd/blob/v2.9.0/src/libkfont/kdfontop.c#L73 # [1]
Signed-off-by: Helge Deller <deller@gmx.de>
Add font_data_import() and update consoles to use it.
The implementation of font_data_import() is based on code from fbcon,
which supports overflow checks and crc32 checksums. Fbcon uses the crc32
checksum.
Newport_con now implements the same overflow checks as fbcon. As before,
this console does not support checksums, which are optional. Newport_con
can now also handle input font data with a vertical pitch other than 32
bytes. (The vertical pitch is the offset between two glyphs in the font
data.)
As an internal change, remove the const qualifier from the data field
if struct font_data. This allows font_data_import() to write the data
without type casting. For all users of the font data via font_data_t,
the stored data is still read only.
v3:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Add font_data_is_equal() and update consoles to use it.
Font data is equal if it has the same size and contains the same values
on all bytes. Only fbcon uses a crc32 checksum. If set in both operands
the checksums have to be equal.
The new helper also guarantees to not compare internal fonts against
fonts from user space. Internal fonts cannot be ref-counted, so making
them equal to user-space fonts with the same byte sequence results in
undefined behavior.
The test only compares data buffers. Their interpretation is up each
console. Therefore remove a width test in fbcon_set_font().
v3:
- rebase onto font_data_{get,put}()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Add font_data_get() and font_data_put(). Update consoles to use them
over REFCOUNT() and plain kfree().
Newly allocated font data starts with a reference count of 1. Loading
the font puts the previously loaded font. If the reference count reaches
zero, font_data_put() frees the font data.
The kernel stores a refcount of zero for internal font data. Invoking
font_data_get() and font_data_put() tests this internally and returns
success without further operation. From the caller's perspective,
getting and putting works the same for all font data.
Fbcon used the userfont flag distinguish between internal fonts and
fonts loaded by user space. Only the latter where refcounted. With the
new helper's automatic handling of internal font data, remove the
userfont flag from fbcon.
Newport_con uses a default font, FONT_DATA, until user space loads
custom font data. Remove all special cases for FONT_DATA, as the get
and put calls' read-only handling also covers this case.
v3:
- fix module linker error wrt font symbols (Nathan, Arnd)
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Store font data as pointer to font_data_t instead of unsigned char.
Update consoles.
Pointers to font data refer to the raw data. There is a hidden header
before the data that contains additional state. Document the existing
layout and semantics of font_data_t.
The data field in struct vc_font can be used by any console. Therefore
it still points to plain data without the additional header. Fbcon sets
its value from struct fbcon_display.fontdata. Hence, update the size
test in fbcon_resize() to use struct fbcon_display.fontdata instead of
struct vc_font.data.
v3:
- fix typos (Helge)
v2:
- 'Font lookup' -> 'Font description' in <linux/font.h>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
In fbcon, fbcon_resize() computes the size of the font buffer from the
values stored in vc_font. Move these calculations to the dedicated helpers
vc_font_pitch() and vc_font_size().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Replace struct console_font with struct vc_font for the type of the
vc_font field of struct vc_data. Struct console_font is UAPI, which
prevents further changes. Hence a new data type is required.
Struct console_font has a documented vertical pitch of 32 bytes. This
is not the case after the font data has been loaded into the kernel.
Changing the type of vc_font addresses this inconsistency.
The font data is now declared as constant, as it might come from the
kernel's read-only section. There's some fallout throughout the console
code where non-const variables refer to it. Fix them. A later update
will declare the font data to a dedicated data type.
v3:
- fix typos
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Fbdev's padding helpers do not modify the source buffer. Declare the
parameter as 'const'.
Fbcon's font-rendering code calls these helpers with the font data.
Declaring src as const will allow for making the font data constant
as well.
While at it, also remove the extern qualifier from the function
declarations in the header file.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The pageref array stores all pageref structures for a device's defio
helpers. Move it into struct fb_deferred_io_state to not expose it to
drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Move variable fields from struct fb_deferred_io into struct
fb_deferred_io_state. These fields are internal to the defio code
and should not be exposed to drivers. At some later point, struct
fb_defered_io might become const in all defio code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Acquire a module reference on each mmap and VMA open; hold it until
the kernel closes the VMA. Protects against unloading the module
while user space still has a mapping of the graphics memory. The
VMA page-fault handling would then call into undefined code.
This situation can happen if the underlying device has been unplugged
and the driver has been unloaded. It would then be possible to trigger
the bug by unloading the fbdev core module.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an
instance as part of initializing deferred I/O and remove it only after
the final mapping has been closed. If the fb_info and the contained
deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info
to invalidate the mapping. Any access will then result in a SIGBUS
signal.
Fixes a long-standing problem, where a device hot-unplug happens while
user space still has an active mapping of the graphics memory. The hot-
unplug frees the instance of struct fb_info. Accessing the memory will
operate on undefined state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 60b59beafb ("fbdev: mm: Deferred IO support")
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v2.6.22+
Signed-off-by: Helge Deller <deller@gmx.de>
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. Replace
it with the safer strscpy(). No functional changes.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Helge Deller <deller@gmx.de>
For a while I was trying to get this working on m68k, for some reason
the card doesn't display anything if it's own video BIOS didn't run..
Anyhow, I spent a long time looking up what each of these offsets
were to work out what the code is configuring and eventually
replaced them with the human readable defines in video/vga.h.
Functionally there is no change but maybe it makes it a bit easier to
look at for the next person that finds themselves in here.
Tested on a real voodoo 3 on x86_64.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Signed-off-by: Helge Deller <deller@gmx.de>
Replace the open-coded platform_get_resource() + ioremap() pair with
devm_platform_ioremap_resource(), which requests the memory region and
maps it in a single call, with automatic cleanup on device removal.
Also reset regbase to NULL in remove() so that the single-instance
guard in probe() works correctly if the device is re-probed.
Signed-off-by: Amin GATTOUT <amin.gattout@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Replace the open-coded platform_get_resource() + ioremap() pair with
devm_platform_ioremap_resource(), which requests the memory region and
maps it in a single call, with automatic cleanup on device removal.
Signed-off-by: Amin GATTOUT <amin.gattout@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Fix an error reported by the kernel test robot:
au1100fb.c: error: implicit declaration of function 'KSEG1ADDR'; did you mean 'CKSEG1ADDR'?
arch/mips/include/asm/addrspace.h defines KSEG1ADDR only for 32 bit
configurations. So provide its compile-test stub also for 64bit mips builds.
Fixes: 6f366e8648 ("fbdev: au1100fb: Make driver compilable on non-mips platforms")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603042127.PT6LuKqi-lkp@intel.com/
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
This also gets rid of an old address of the FSF.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This gets rid of a header that is only used once. The copyrights and
license specifications are all already covered in the au1100fb.c file.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The global wrappers also have the advantage to do stricter format
checking, so the pr_devel formats are also checked if DEBUG is not
defined. The global variants only check for DEBUG being defined and not
its actual value, so the #define to zero is dropped, too.
There is only a slight semantic change as the (by default disabled)
debug output doesn't contain __FILE__ any more.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The header asm/mach-au1x00/au1000.h is unused apart from pulling in
<linux/delay.h> (for mdelay()) and <linux/io.h> (for KSEG1ADDR()). Then
the only platform specific part in the driver is the usage of the KSEG1ADDR
macro, which for the non-mips case can be stubbed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
%zu is the dedicated type for size_t. %d only works on 32bit
architectures where size_t is typedef'd to be unsigned int. (And then
the signedness doesn't fit, but `gcc -Wformat` doesn't stumble over this.
Also the size of dma_addr_t is architecture dependent and it should be
printkd using %pad (and the value passed by reference).
This prepares allowing this driver to be compiled on non-mips platforms.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Using global data to store device specific data is a bad pattern that
breaks if there is more than one device. So expand driver data and drop
the global variables.
While there is probably no machine that has two or more au1100fb
devices, this makes the driver a better template for new drivers and
saves some memory if there is no such bound device.
bloat-o-meter reports (for ARCH=arm allmodconfig + CONFIG_FB_AU1100=y
and ignoring the rename of the init function):
add/remove: 1/4 grow/shrink: 2/2 up/down: 1360/-4800 (-3440)
Function old new delta
au1100fb_drv_probe 2648 3328 +680
$a 12808 13484 +676
au1100fb_drv_resume 404 400 -4
au1100fb_fix 68 - -68
au1100fb_var 160 - -160
fbregs 2048 - -2048
$d 9525 7009 -2516
Total: Before=38664, After=35224, chg -8.90%
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The field inverse in struct fbcon_display is unused. Remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
In au1200fb_drv_probe(), when platform_get_irq fails(), it directly
returns from the function with an error code, which causes a memory
leak.
Replace it with a goto label to ensure proper cleanup.
Fixes: 4e88761f5f ("fbdev: au1200fb: Fix missing IRQ check in au1200fb_drv_probe")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Fix Sun FFB1 corrupted video out ([1] and [2]) by disabling overlay and
initializing window mode to a known state. The issue never appeared on
my FFB2+/vertical nor Elite3D/M6. It could also depend on the PROM
version.
/SUNW,ffb@1e,0: FFB at 000001fc00000000, type 11, DAC pnum[236c] rev[10] manuf_rev[4]
X (II) /dev/fb0: Detected FFB1, Z-buffer, Single-buffered.
X (II) /dev/fb0: BT9068 (PAC1) ramdac detected (with normal cursor control)
X (II) /dev/fb0: Detected Creator/Creator3D
[1] https://www.instagram.com/p/DUTcSmSjSem/
[2] https://chaos.social/@ReneRebe/116023241660154102
Signed-off-by: René Rebe <rene@exactco.de>
Cc: stable@kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Check the return value of clk_enable() in au1100fb_drv_resume() and
return the error on failure.
This ensures the system is aware of the resume failure and can track
its state accurately.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
do_con_write(), fbcon_redraw.*() invoke console_conditional_schedule()
which is a conditional scheduling point based on printk's internal
variables console_may_schedule. It may only be used if the console lock
is acquired for instance via console_lock() or console_trylock().
Prinkt sets the internal variable to 1 (and allows to schedule)
if the console lock has been acquired via console_lock(). The trylock
does not allow it.
The console_conditional_schedule() invocation in do_con_write() is
invoked shortly before console_unlock().
The console_conditional_schedule() invocation in fbcon_redraw.*()
original from fbcon_scroll() / vt's con_scroll() which originate from a
line feed.
In console_unlock() the variable is set to 0 (forbids to schedule) and
it tries to schedule while making progress printing. This is brand new
compared to when console_conditional_schedule() was added in v2.4.9.11.
In v2.6.38-rc3, console_unlock() (started its existence) iterated over
all consoles and flushed them with disabled interrupts. A scheduling
attempt here was not possible, it relied that a long print scheduled
before console_unlock().
Since commit 8d91f8b153 ("printk: do cond_resched() between lines
while outputting to consoles"), which appeared in v4.5-rc1,
console_unlock() attempts to schedule if it was allowed to schedule
while during console_lock(). Each record is idealy one line so after
every line feed.
This console_conditional_schedule() is also only relevant on
PREEMPT_NONE and PREEMPT_VOLUNTARY builds. In other configurations
cond_resched() becomes a nop and has no impact.
I'm bringing this all up just proof that it is not required anymore. It
becomes a problem on a PREEMPT_RT build with debug code enabled because
that might_sleep() in cond_resched() remains and triggers a warnings.
This is due to
legacy_kthread_func-> console_flush_one_record -> vt_console_print-> lf
-> con_scroll -> fbcon_scroll
and vt_console_print() acquires a spinlock_t which does not allow a
voluntary schedule. There is no need to fb_scroll() to schedule since
console_flush_one_record() attempts to schedule after each line.
!PREEMPT_RT is not affected because the legacy printing thread is only
enabled on PREEMPT_RT builds.
Therefore I suggest to remove console_conditional_schedule().
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Fixes: 5f53ca3ff8 ("printk: Implement legacy printer kthread for PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com> # from printk() POV
Signed-off-by: Helge Deller <deller@gmx.de>
mask is u8, so it should use 0xff instead of 0xfff
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not
freed if the error path is reached.
Fixes: e7b995371f ("video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
We know "size" is non-zero because it is checked on the line before.
Delete the duplicate check and pull the code in a tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The sh_mobile_lcdc driver exposes overlay configuration via sysfs, but the
core driver does not require CONFIG_FB_DEVICE.
Make overlay sysfs optional so that the driver can build and operate
even when FB_DEVICE is disabled. The kernel naturally ignores the
missing attribute group, preserving buildability and type safety.
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
omapfb provides several sysfs interfaces for framebuffer configuration
and debugging, but these are not required for the core driver.
Remove the hard dependency on CONFIG_FB_DEVICE and make sysfs support
optional by using dev_of_fbinfo() to obtain the backing device at runtime.
When FB_DEVICE is disabled, sysfs operations are skipped while the code
still builds and is type-checked.
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
If fbcon_open() fails when called from con2fb_acquire_newinfo() then
info->fbcon_par pointer remains NULL which is later dereferenced.
Add check for return value of the function con2fb_acquire_newinfo() to
avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d1baa4ffa6 ("fbcon: set_con2fb_map fixes")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
The HyperV DRM driver is available since 5.14. This makes the hyperv_fb
driver redundant, remove it.
Signed-off-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The fbdev sysfs attributes are registered after sending the uevent for
the device creation, leaving a race window where e.g. udev rules may
not be able to access the sysfs attributes because the registration is
not done yet.
Fix this by switching to device_create_with_groups(). This also results in
a nice cleanup. After switching to device_create_with_groups() all that
is left of fb_init_device() is setting the drvdata and that can be passed
to device_create[_with_groups]() too. After which fb_init_device() can
be completely removed.
Dropping fb_init_device() + fb_cleanup_device() in turn allows removing
fb_info.class_flag as they were the only user of this field.
Fixes: 5fc830d6ac ("fbdev: Register sysfs groups through device_add_group")
Cc: stable@vger.kernel.org
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from
userspace to kernelspace, and instead directly references the memory,
which can cause problems if invalid data is passed from userspace. Fix
this all up by correctly copying the memory before accessing it within
the kernel.
Reported-by: Tianchu Chen <flynnnchen@tencent.com>
Cc: stable <stable@kernel.org>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
The following log reveals it:
rivafb: setting virtual Y resolution to 2184
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline]
RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546
Call Trace:
nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603
nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline]
CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246
riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779
rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188
__x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors.
- Use pin_init::zeroed() for fops initialization.
- Annotate DRM helpers with __rust_helper.
- Improve safety documentation for gem::Object::new().
- Update AlwaysRefCounted imports.
- mm: Prevent integer overflow in page_align().
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switched to use virtual planes by default
- Fixed DSI CMD panels on DPU 3.x
- Rewrote format handling to remove intermediate representation
- Fixed watchdog on DPU 8.x+
- Fixed TE / Vsync source setting on DPU 8.x+
- Added 3D_Mux on SC7280
- Kaanapali platform support
- Fixed UBWC register programming
- Made RM reserve DSPP-enabled mixers for CRTCs with LMs.
- Gamma correction support
- DP:
- Enabled support for eDP 1.4+ link rate tables
- Fixed MDSS1 DP indices on SA8775P, making them to work
- Fixed msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Documented QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switched to divider_determine_rate()
- MDP5:
- Dropped support for MSM8998, SDM660 and SDM630 (switched over
to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation.
- Get rid of the Result<impl PinInit<T, E>> anti-pattern.
- Relocate initializer-specific code into the appropriate initializer.
- Use CStr::from_bytes_until_nul() to remove custom helpers.
- Improve handling of unexpected firmware values.
- Clean up redundant debug prints.
- Replace c_str!() with native Rust C-string literals.
- Update nova-core task list.
nova:
- Align GEM object size to system page size.
tyr:
- Use generated uAPI bindings for GpuInfo.
- Replace manual sleeps with read_poll_timeout().
- Replace c_str!() with native Rust C-string literals.
- Suppress warnings for unread fields.
- Fix incorrect register name in print statement.
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
-----BEGIN PGP SIGNATURE-----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=RFJ2
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
Move x86's edid_info into sysfb_primary_display as a new field named
edid. Adapt all users.
An instance of edid_info has only been defined on x86. With the move
into sysfb_primary_display, it becomes available on all architectures.
Therefore remove this contraint from CONFIG_FIRMWARE_EDID.
x86 fills the EDID data from boot_params.edid_info. DRM drivers pick
up the raw data and make it available to DRM clients. Replace the
drivers' references to edid_info and instead use the sysfb_display_info
as passed from sysfb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of screen_info, store a copy of sysfb_primary_display as
device data. Pick it up in drivers. Later changes will add additional
data to the display info, such as EDID information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Framework updates:
- fonts: Add Terminus 10x18 console font [Neilay Kharwadkar]
Driver fixes:
- gbefb: fix to use physical address instead of dma address [René Rebe]
- tcx.c fix mem_map to correct smem_start offset [René Rebe]
- pxafb: Fix multiple clamped values in pxafb_adjust_timing [Thorsten Blum]
- ssd1307fb: fix potential page leak in ssd1307fb_probe() [Abdun Nihaal]
Cleanups:
- vga16fb: Request memory region [Javier Garcia]
- vga16fb: replace printk() with dev_*() in probe [Vivek BalachandharTN]
- vesafb, gxt4500fb, tridentfb: Use dev_dbg() instead of printk() [Javier Garcia]
- i810: use dev_info() [Shi Hao]
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaTSM3gAKCRD3ErUQojoP
X+J6AP4+xxGAluBRwJwUXX+imIKq9DxkufXL4UzECl1WGeNVMAEAxAEcV+5RtvtQ
lh7yk5tUr5yjntP1HRaVT93aGhpv6QQ=
=0Oyt
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"The Termius 10x18 console bitmap font has been added. It is good
match for modern 13-16 inch laptop displays with resolutions like
1280x800 and 1440x900 pixels.
The gbefb and tcx.c drivers got some fixes to restore X11 support,
pxafb was not actually clamping input values and the ssd1307fb driver
leaked memory in the failure path.
The other patches convert some common drivers to use dev_info() and
dev_dbg() instead of printk(). Summary:
Framework updates:
- fonts: Add Terminus 10x18 console font [Neilay Kharwadkar]
Driver fixes:
- gbefb: fix to use physical address instead of dma address [René Rebe]
- tcx.c fix mem_map to correct smem_start offset [René Rebe]
- pxafb: Fix multiple clamped values in pxafb_adjust_timing [Thorsten Blum]
- ssd1307fb: fix potential page leak in ssd1307fb_probe() [Abdun Nihaal]
Cleanups:
- vga16fb: Request memory region [Javier Garcia]
- vga16fb: replace printk() with dev_*() in probe [Vivek BalachandharTN]
- vesafb, gxt4500fb, tridentfb: Use dev_dbg() instead of printk() [Javier Garcia]
- i810: use dev_info() [Shi Hao]"
* tag 'fbdev-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: ssd1307fb: fix potential page leak in ssd1307fb_probe()
fbdev: i810: use appopriate log interface dev_info
fbdev: tridentfb: replace printk() with dev_*() in probe
lib/fonts: Add Terminus 10x18 console font
fbdev: pxafb: Fix multiple clamped values in pxafb_adjust_timing
fbdev: tcx.c fix mem_map to correct smem_start offset
fbdev: gxt4500fb: Use dev_err instead of printk
fbdev: gbefb: fix to use physical address instead of dma address
fbdev: vesafb: Use dev_* fn's instead printk
fbdev: vga16fb: Request memory region
fbdev: vga16fb: replace printk() with dev_*() in probe
The page allocated for vmem using __get_free_pages() is not freed on the
error paths after it. Fix that by adding a corresponding __free_pages()
call to the error path.
Fixes: facd94bc45 ("fbdev: ssd1307fb: Allocate page aligned video memory.")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Helge Deller <deller@gmx.de>
new driver:
- Arm Ethos-U65/U85 accel driver
core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement.
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA,
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel.
- ilitek-ili9881c : add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615 as
supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205
-----BEGIN PGP SIGNATURE-----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=gpnQ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
There were many printk log interfaces which do no had
any KERN_INFO with them and they can be replaced with
dev_info which will allow better log level handling
making messages clear and manageable.
No functional changes to the driver behavior are introduced.
Only the logging method has been replaced as per modern
kernel coding guidelines.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The variables were never clamped because the return value of clamp_val()
was not used. Fix this by assigning the clamped values, and use clamp()
instead of clamp_val().
Cc: stable@vger.kernel.org
Fixes: 3f16ff608a ("[ARM] pxafb: cleanup of the timing checking code")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Helge Deller <deller@gmx.de>
403ae52ac0 ("sparc: fix drivers/video/tcx.c warning") changed the
physbase initializing breaking the user-space mmap, e.g. for Xorg
entirely.
Fix fbdev mmap table so the sbus mmap helper work correctly, and
not try to map vastly (physbase) offset memory.
Fixes: 403ae52ac0 ("sparc: fix drivers/video/tcx.c warning")
Cc: <stable@vger.kernel.org>
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Helge Deller <deller@gmx.de>
There are no implementations of fb_debug_enter and fb_debug_leave.
Remove the callbacks from struct fb_ops and clean up the caller.
The field save_graphics in fbcon_par is also no longer required.
Remove it as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-6-tzimmermann@suse.de
Protect vga_switcheroo_client_fb_set() with console lock. Avoids OOB
access in fbcon_remap_all(). Without holding the console lock the call
races with switching outputs.
VGA switcheroo calls fbcon_remap_all() when switching clients. The fbcon
function uses struct fb_info.node, which is set by register_framebuffer().
As the fb-helper code currently sets up VGA switcheroo before registering
the framebuffer, the value of node is -1 and therefore not a legal value.
For example, fbcon uses the value within set_con2fb_map() [1] as an index
into an array.
Moving vga_switcheroo_client_fb_set() after register_framebuffer() can
result in VGA switching that does not switch fbcon correctly.
Therefore move vga_switcheroo_client_fb_set() under fbcon_fb_registered(),
which already holds the console lock. Fbdev calls fbcon_fb_registered()
from within register_framebuffer(). Serializes the helper with VGA
switcheroo's call to fbcon_remap_all().
Although vga_switcheroo_client_fb_set() takes an instance of struct fb_info
as parameter, it really only needs the contained fbcon state. Moving the
call to fbcon initialization is therefore cleaner than before. Only amdgpu,
i915, nouveau and radeon support vga_switcheroo. For all other drivers,
this change does nothing.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.17/source/drivers/video/fbdev/core/fbcon.c#L2942 # [1]
Fixes: 6a9ee8af34 ("vga_switcheroo: initial implementation (v15)")
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: <stable@vger.kernel.org> # v2.6.34+
Link: https://patch.msgid.link/20251105161549.98836-1-tzimmermann@suse.de
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmkaT2IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGnakIAIq6O35+abAlDGe7
n8IwX/4hwDJ9Ol2vddg6jTdio3szSlvcXRAyijkG35etLap+i+Q78Q9H1fRcQ8CF
5t9kfs5oCVWEDlsHMI+Q38vYB3tWikaIUIuao6pH5U50fsA0KM/287TLYdzvmBsK
gy0BHoZhl++xdMsD2HNwt08RrK/IyY+Zp9i7pKhcsxJiJCgy8nq5ZxhmRPbqTKNc
IqIBPzG+UYcOd88Iz377Ax+TnzWaTpwyvfaiU8DVFMN0FeENdk1FY8ClYfpYxCDH
Pm5NzL/f54VtdZ3aL1fKmYwWN7WFJT4FH3l6DOvtCc+Gx3KW1a3Y508CbqYBXvgY
QV4oH4Y=
=iSoY
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc6' into drm-next
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
While debuggigng why X would not start on mips64 Sgi/O2 I found the
phys adress being off. Turns out the gbefb passed the internal
dma_addr as phys. May be broken pre git history. Fix by converting
dma_to_phys.
Signed-off-by: René Rebe <rene@exactco.de>
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Family dev_* fn's will show device name, giving extra info to logs.
Delete the prefix `vesafb:` from msg strings, not needed now, e.g.:
vesa-framebuffer vesa-framebuffer.0: scrolling: redraw
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This patch reserve and release VGA memory region.
This align with Documentation/drm/todo.rst
"Request memory regions in all fbdev drivers"
I've tested with 32bits kernel and qemu.
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Use dev_*() with &dev->dev and drop the hard-coded prefix. Keep
original severities. No functional change.
Signed-off-by: Vivek BalachandharTN <vivek.balachandhar@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Actually check the return value from pll_ops->init_pll()
as it can return an error.
If the card's BIOS didn't run because it's not the primary VGA card
the fact that the xclk source is unsupported is printed as shown
below but the driver continues on regardless and on my machine causes
a hard lock up.
[ 61.470088] atyfb 0000:03:05.0: enabling device (0080 -> 0083)
[ 61.476191] atyfb: using auxiliary register aperture
[ 61.481239] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x27]
[ 61.487569] atyfb: 512K SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63 MHz XCLK
[ 61.496112] atyfb: Unsupported xclk source: 5.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Recently, we discovered the following issue through syzkaller:
BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0
Read of size 4 at addr ff11000001b3c69c by task syz.xxx
...
Call Trace:
<TASK>
dump_stack_lvl+0xab/0xe0
print_address_description.constprop.0+0x2c/0x390
print_report+0xb9/0x280
kasan_report+0xb8/0xf0
fb_mode_is_equal+0x285/0x2f0
fbcon_mode_deleted+0x129/0x180
fb_set_var+0xe7f/0x11d0
do_fb_ioctl+0x6a0/0x750
fb_ioctl+0xe0/0x140
__x64_sys_ioctl+0x193/0x210
do_syscall_64+0x5f/0x9c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Based on experimentation and analysis, during framebuffer unregistration,
only the memory of fb_info->modelist is freed, without setting the
corresponding fb_display[i]->mode to NULL for the freed modes. This leads
to UAF issues during subsequent accesses. Here's an example of reproduction
steps:
1. With /dev/fb0 already registered in the system, load a kernel module
to register a new device /dev/fb1;
2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP);
3. Switch console from fb to VGA (to allow normal rmmod of the ko);
4. Unload the kernel module, at this point fb1's modelist is freed, leaving
a wild pointer in fb_display[];
5. Trigger the bug via system calls through fb0 attempting to delete a mode
from fb0.
Add a check in do_unregister_framebuffer(): if the mode to be freed exists
in fb_display[], set the corresponding mode pointer to NULL.
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Commit e24cca19ba ("sh: Kill off MAX_DMA_ADDRESS leftovers.") removed
the define ONCHIP_NR_DMA_CHANNELS. So that the leftover reference needs
to be replaced by CONFIG_NR_ONCHIP_DMA_CHANNELS to compile successfully
with CONFIG_PVR2_DMA enabled.
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
The of_find_node_by_name() function returns a device tree node with its
reference count incremented. The caller is responsible for calling
of_node_put() to release this reference when done.
Found via static analysis.
Fixes: cc5d0189b9 ("[PATCH] powerpc: Remove device_node addrs/n_addr")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
Bug fixes:
- Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds (Albin Babu Varghese)
- Fix logic error in "offb" name match (Finn Thain)
- simplefb: Fix use after free in simplefb_detach_genpds() (Janne Grunau)
- s3fb: Various fixes and powersave improvements (Zsolt Kajtar)
Enhancements & code cleanups:
- Various fixes in the documentation (Bagas Sanjaya)
- Use string choices helpers (Chelsy Ratnawat)
- xenfb: Use vmalloc_array to simplify code (Qianfeng Rong)
- mb862xxfb: Use int type to store negative error codes (Qianfeng Rong)
- Make drivers depend on LCD_CLASS_DEVICE (Thomas Zimmermann)
- radeonfb: Remove stale product link in Kconfig (Sukrut Heroorkar)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaOkH4wAKCRD3ErUQojoP
X4sPAP9NEDUdf2ZcPUiG30XVKdhHlxEffzAWs0RsSBaYlrAMjwD+Ja6IVI/5ib+e
xEeDeExWrlC77Y90j8reBw9B+/Xu4Ak=
=WS3Q
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the usual bunch of smaller bug fixes, the majority of changes
were by Zsolt Kajtar to improve the s3fb driver.
Bug fixes:
- Bounds checking to fix vmalloc-out-of-bounds (Albin Babu Varghese)
- Fix logic error in "offb" name match (Finn Thain)
- simplefb: Fix use after free in (Janne Grunau)
- s3fb: Various fixes and powersave improvements (Zsolt Kajtar)
Enhancements & code cleanups:
- Various fixes in the documentation (Bagas Sanjaya)
- Use string choices helpers (Chelsy Ratnawat)
- xenfb: Use vmalloc_array to simplify code (Qianfeng Rong)
- mb862xxfb: use signed type for error codes (Qianfeng Rong)
- Make drivers depend on LCD_CLASS_DEVICE (Thomas Zimmermann)
- radeonfb: Remove stale product link in Kconfig (Sukrut Heroorkar)"
* tag 'fbdev-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix logic error in "offb" name match
fbdev: Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds
fbdev: Make drivers depend on LCD_CLASS_DEVICE
fbdev: radeonfb: Remove stale product link in Kconfig
Documentation: fb: Retitle driver docs
Documentation: fb: ep93xx: Demote section headings
Documentation: fb: Split toctree
fbdev: simplefb: Fix use after free in simplefb_detach_genpds()
fbdev: s3fb: Revert mclk stop in suspend
fbdev: mb862xxfb: Use int type to store negative error codes
fbdev: Use string choices helpers
fbdev: core: Fix ubsan warning in pixel_to_pat
fbdev: s3fb: Implement 1 and 2 BPP modes, improve 4 BPP
fbdev: s3fb: Implement powersave for S3 FB
fbdev: xenfb: Use vmalloc_array to simplify code
A regression was reported to me recently whereby /dev/fb0 had disappeared
from a PowerBook G3 Series "Wallstreet". The problem shows up when the
"video=ofonly" parameter is passed to the kernel, which is what the
bootloader does when "no video driver" is selected. The cause of the
problem is the "offb" string comparison, which got mangled when it got
refactored. Fix it.
Cc: stable@vger.kernel.org
Fixes: 93604a5ade ("fbdev: Handle video= parameter in video/cmdline.c")
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmjkpakTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXip5B/48MvTFJ1qwRGPVzevZQ8Z4SDogEREp
69VS/xRf1YCIzyXyanwqf1dXLq8NAqicSp6ewpJAmNA55/9O0cwT2EtohjeGCu61
krPIvS3KT7xI0uSEniBdhBtALYBscnQ0e3cAbLNzL7bwA6Q6OmvoIawpBADgE/cW
aZNCK9jy+WUqtXc6lNtkJtST0HWGDn0h04o2hjqIkZ+7ewjuEEJBUUB/JZwJ41Od
UxbID0PAcn9O4n/u/Y/GH65MX+ddrdCgPHEGCLAGAKT24lou3NzVv445OuCw0c4W
ilALIRb9iea56ZLVBW5O82+7g9Ag41LGq+841MNlZjeRNONGykaUpTWZ
=OR26
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Unify guest entry code for KVM and MSHV (Sean Christopherson)
- Switch Hyper-V MSI domain to use msi_create_parent_irq_domain()
(Nam Cao)
- Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV
(Mukesh Rathor)
- Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov)
- Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna
Kumar T S M)
- Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari,
Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley)
* tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyperv: Remove the spurious null directive line
MAINTAINERS: Mark hyperv_fb driver Obsolete
fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver
Drivers: hv: Make CONFIG_HYPERV bool
Drivers: hv: Add CONFIG_HYPERV_VMBUS option
Drivers: hv: vmbus: Fix typos in vmbus_drv.c
Drivers: hv: vmbus: Fix sysfs output format for ring buffer index
Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store()
x86/hyperv: Switch to msi_create_parent_irq_domain()
mshv: Use common "entry virt" APIs to do work in root before running guest
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
mshv: Handle NEED_RESCHED_LAZY before transferring to guest
x86/hyperv: Add kexec/kdump support on Azure CVMs
Drivers: hv: Simplify data structures for VMBus channel close message
Drivers: hv: util: Cosmetic changes for hv_utils_transport.c
mshv: Add support for a new parent partition configuration
clocksource: hyper-v: Skip unnecessary checks for the root partition
hyperv: Add missing field to hv_output_map_device_interrupt
Add bounds checking to prevent writes past framebuffer boundaries when
rendering text near screen edges. Return early if the Y position is off-screen
and clip image height to screen boundary. Break from the rendering loop if the
X position is off-screen. When clipping image width to fit the screen, update
the character count to match the clipped width to prevent buffer size
mismatches.
Without the character count update, bit_putcs_aligned and bit_putcs_unaligned
receive mismatched parameters where the buffer is allocated for the clipped
width but cnt reflects the original larger count, causing out-of-bounds writes.
Reported-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48b0652a95834717f190
Suggested-by: Helge Deller <deller@gmx.de>
Tested-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
- The 3 patch series "ida: Remove the ida_simple_xxx() API" from
Christophe Jaillet completes the removal of this legacy IDR API.
- The 9 patch series "panic: introduce panic status function family"
from Jinchao Wang provides a number of cleanups to the panic code and
its various helpers, which were rather ad-hoc and scattered all over the
place.
- The 5 patch series "tools/delaytop: implement real-time keyboard
interaction support" from Fan Yu adds a few nice user-facing usability
changes to the delaytop monitoring tool.
- The 3 patch series "efi: Fix EFI boot with kexec handover (KHO)" from
Evangelos Petrongonas fixes a panic which was happening with the
combination of EFI and KHO.
- The 2 patch series "Squashfs: performance improvement and a sanity
check" from Phillip Lougher teaches squashfs's lseek() about
SEEK_DATA/SEEK_HOLE. A mere 150x speedup was measured for a well-chosen
microbenchmark.
- Plus another 50-odd singleton patches all over the place.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN78zwAKCRDdBJ7gKXxA
jhLeAQCddTv0XtSUTrvBvmrJVUBrQQeJc+LtNopMIjfAF/WAWAEAogSVKxg+HHEB
GaVixx4zDriNzEqrqiCx9rm4l+YooQA=
=XRe0
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet
completes the removal of this legacy IDR API
- "panic: introduce panic status function family" from Jinchao Wang
provides a number of cleanups to the panic code and its various
helpers, which were rather ad-hoc and scattered all over the place
- "tools/delaytop: implement real-time keyboard interaction support"
from Fan Yu adds a few nice user-facing usability changes to the
delaytop monitoring tool
- "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos
Petrongonas fixes a panic which was happening with the combination of
EFI and KHO
- "Squashfs: performance improvement and a sanity check" from Phillip
Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere
150x speedup was measured for a well-chosen microbenchmark
- plus another 50-odd singleton patches all over the place
* tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits)
Squashfs: reject negative file sizes in squashfs_read_inode()
kallsyms: use kmalloc_array() instead of kmalloc()
MAINTAINERS: update Sibi Sankar's email address
Squashfs: add SEEK_DATA/SEEK_HOLE support
Squashfs: add additional inode sanity checking
lib/genalloc: fix device leak in of_gen_pool_get()
panic: remove CONFIG_PANIC_ON_OOPS_VALUE
ocfs2: fix double free in user_cluster_connect()
checkpatch: suppress strscpy warnings for userspace tools
cramfs: fix incorrect physical page address calculation
kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit
Squashfs: fix uninit-value in squashfs_get_parent
kho: only fill kimage if KHO is finalized
ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name()
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock
coccinelle: platform_no_drv_owner: handle also built-in drivers
coccinelle: of_table: handle SPI device ID tables
lib/decompress: use designated initializers for struct compress_format
efi: support booting with kexec handover (KHO)
...
The Hyper-V DRM driver is available since kernel version 5.14 and it
provides full KMS support and fbdev emulation via the DRM fbdev helpers.
Deprecate this driver in favor of Hyper-V DRM driver.
Signed-off-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
LCD_CLASS_DEVICE is the user-controlled option that enables the LCD
display subsystem. Do not select it from fbdev drivers. Selecting it
from drivers can lead to cyclic dependencies within the config.
Some guidelines for using select can be found in the kernel docs at [1].
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.16/source/Documentation/kbuild/kconfig-language.rst#L147 # [1]
Signed-off-by: Helge Deller <deller@gmx.de>
The product page referenced in the FB_RADEON is no longer valid.
Remove it to avoid pointing to an invalid link.
Signed-off-by: Sukrut Heroorkar <hsukrut3@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
At present VMBus driver is hinged off of CONFIG_HYPERV which entails
lot of builtin code and encompasses too much. It's not always clear
what depends on builtin hv code and what depends on VMBus. Setting
CONFIG_HYPERV as a module and fudging the Makefile to switch to builtin
adds even more confusion. VMBus is an independent module and should have
its own config option. Also, there are scenarios like baremetal dom0/root
where support is built in with CONFIG_HYPERV but without VMBus. Lastly,
there are more features coming down that use CONFIG_HYPERV and add more
dependencies on it.
So, create a fine grained HYPERV_VMBUS option and update Kconfigs for
dependency on VMBus.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Signed-off-by: Wei Liu <wei.liu@kernel.org>
