Highlights:
- asus-wmi:
- Retain battery charge threshold during boot which avoids unsolicited
change to 100%. Return -ENODATA when the limit is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
- barco-p50-gpio: Normalize gpio_get return values
- bitland-mifs-wmi: Add driver for Bitland laptops (supports platform
profile,hwmon, kbd backlight, gpu mode, hotkeys, and
fan boost)
- dell_rbu: Fix using uninitialized value in sysfs write function
- dell-wmi-sysman: Respect destination length when constructing enum
strings
- hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and Omen MAX
16-ak0xxxx
- input: trackpoint & thinkpad_acpi: Enable doubletap by default and
add sysfs enable/disable
- int3472: Add support for GPIO type 0x02 (IR flood LED)
- intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
- intel/vsec: Refactor to support ACPI-enumerated PMT endpoints.
- pcengines-apuv2: Attach software node to the gpiochip
- uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
- wmi: Perform output size check within WMI core to allow simpler WMI
drivers
- acpi_driver -> platform driver conversions (a large number of changes
from Rafael J. Wysocki)
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wireless:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-wireless:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-wmi:
- adjust screenpad power/brightness handling
- do not enforce a battery charge threshold
- fix screenpad brightness range
barco-p50-gpio:
- convert to guard() notation
- normalize return value of gpio_get
bitland-mifs-wmi:
- Add new Bitland MIFS WMI driver
dell/dell-rbtn:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
dell_rbu:
- avoid uninit value usage in packet_size_write()
dell-wmi-sysman:
- bound enumeration string aggregation
- Clean up security buffer helpers
- Fix typo in function comment
- Use standard kobj_sysfs_ops
- Use sysfs_emit{_at} in show functions
Documentation: laptops:
- Update documentation for uniwill laptops
Documentation:
- thinkpad-acpi - Document doubletap_enable attribute
eeepc-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
fujitsu:
- Convert backlight driver to a platform one
- Convert laptop driver to a platform one
- Register ACPI notify handlers directly
- Reorder code to avoid forward declarations
fujitsu-tablet:
- Convert ACPI driver to a platform one
hp-wmi:
- add locking for concurrent hwmon access
- add Omen 14-fb0xxx (board 8C58) support
- Add support for Omen 16-n0xxx (8A44)
- Add support for Omen 16-wf1xxx (8C77)
- Add support for OMEN MAX 16-ak0xxx (8D87)
- avoid cancel_delayed_work_sync from work handler
- fix fan table parsing
- fix ignored return values in fan settings
- fix u8 underflow in gpu_delta calculation
- Ignore backlight and FnLock events
- use mod_delayed_work to reset keep-alive timer
input:
- trackpoint - Enable doubletap by default on capable devices
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
- Parameterize LED con_id in registration
- Rename pled to led in LED registration code
- Use local variable for LED struct access
intel/rst:
- Convert ACPI driver to a platform one
intel/smartconnect:
- Convert ACPI driver to a platform one
intel/tpmi:
- Use 32 bit aligned address for debugfs mem write
intel/vsec:
- Decouple add/link helpers from PCI
- Make driver_data info const
- Plumb ACPI PMT discovery tables through vsec
- Refactor base_addr handling
- Return real error codes from registration path
- Switch exported helpers from pci_dev to device
lg-laptop:
- Convert ACPI driver to a platform one
- Drop debug-only ACPI notify handler
nvsw-sn2201:
- Drop unused include
panasonic-laptop:
- Convert ACPI driver to a platform one
- Fix OPTD notifier registration and cleanup
- Make pcc_register_optd_notifier() void
- Register ACPI notify handler directly
- Remove redundant checks from 3 functions
pcengines-apuv2:
- attach software node to the gpiochip
sony-laptop:
- Convert NC driver to a platform one
- Convert PIC driver to a platform one
- Register ACPI notify handler directly
surface: hotplug:
- Correct inclusion for GPIO APIs
surface: surfacepro3_button:
- Convert to a platform driver
- Drop wakeup source on remove
- Register ACPI notify handler
system76:
- Convert ACPI driver to a platform one
- Drop redundant devm_led_classdev_unregister()
- Register ACPI notify handler directly
thinkpad_acpi:
- Add sysfs control for TrackPoint double-tap
- Drop ACPI driver registration
- remove obsolete TODO comment
- use seq_puts() instead of seq_printf()
tools/power/x86/intel-speed-select:
- Avoid current base freq as maximum
- Fix cpu extended family ID decoding
- Fix output when running on unsupported CLX platforms
- Fix some program return value
- Print Version info when Incompatible API version is detected
- v1.26 release
topstar-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
toshiba_acpi:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
- Reorder code to avoid forward declaration
toshiba_bluetooth:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
toshiba_haps:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
uniwill-laptop:
- Apply features across all TUXEDO devices
- Fix signedness bug
- Fix XMG Fusion 15 (L19) entries
- Implement USB-C power priority setting
- Rework hwmon feature defines
wireless-hotkey:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
wmi:
- Add wmidev_invoke_procedure()
- Convert drivers to use wmidev_invoke_procedure()
- Extend wmidev_invoke_method() to reject undersized data
- Extend wmidev_query_block() to reject undersized data
- Prepare to reject undersized unmarshalling results
- Replace .no_notify_data with .min_event_size
x86:
- remove unnecessary module_init/exit() functions
Merges:
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
- Merge tag 'fixes' into 'for-next'
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaeYxSwAKCRBZrE9hU+XO
MRzTAQCPUKVOpSY/cjtPXVBn0uJbAo1MSvytv00Kv7dcatvrrwEA9lqmwOfl0kzr
CowEVVCD3om++W9vOsL65hachbAl1QA=
=1qkw
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"asus-wmi:
- Retain battery charge threshold during boot which avoids
unsolicited change to 100%. Return -ENODATA when the limit
is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
barco-p50-gpio:
- Normalize gpio_get return values
bitland-mifs-wmi:
- Add driver for Bitland laptops (supports platform profile,
hwmon, kbd backlight, gpu mode, hotkeys, and fan boost)
dell_rbu:
- Fix using uninitialized value in sysfs write function
dell-wmi-sysman:
- Respect destination length when constructing enum strings
hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and
Omen MAX 16-ak0xxxx
input: trackpoint & thinkpad_acpi:
- Enable doubletap by default and add sysfs enable/disable
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
intel/vsec:
- Refactor to support ACPI-enumerated PMT endpoints.
pcengines-apuv2:
- Attach software node to the gpiochip
uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
wmi:
- Perform output size check within WMI core to allow simpler WMI
drivers
misc:
- acpi_driver -> platform driver conversions (a large number of
changes from Rafael J. Wysocki)
- cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits)
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C77)
platform/x86: hp-wmi: Add support for Omen 16-n0xxx (8A44)
platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8D87)
platform/x86: hp-wmi: fix fan table parsing
platform/x86: hp-wmi: add Omen 14-fb0xxx (board 8C58) support
platform/wmi: Replace .no_notify_data with .min_event_size
platform/wmi: Extend wmidev_query_block() to reject undersized data
platform/wmi: Extend wmidev_invoke_method() to reject undersized data
platform/wmi: Prepare to reject undersized unmarshalling results
platform/wmi: Convert drivers to use wmidev_invoke_procedure()
platform/wmi: Add wmidev_invoke_procedure()
platform/x86: int3472: Add support for GPIO type 0x02 (IR flood LED)
platform/x86: int3472: Parameterize LED con_id in registration
platform/x86: int3472: Rename pled to led in LED registration code
platform/x86: int3472: Use local variable for LED struct access
platform/x86: thinkpad_acpi: remove obsolete TODO comment
platform/x86: dell-wmi-sysman: bound enumeration string aggregation
platform/x86: hp-wmi: Ignore backlight and FnLock events
platform/x86: uniwill-laptop: Fix signedness bug
platform/x86: dell_rbu: avoid uninit value usage in packet_size_write()
...
Add support for GPIO-based charlieplex keypad, allowing to control
N^2-N keys using N GPIO lines.
Reuse matrix keypad keymap to simplify, even if there is no concept
of rows and columns in this type of keyboard.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260312180304.3865850-5-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The commit 68743c500c ("Input: edt-ft5x06 - use per-client debugfs
directory") removed the manual debugfs teardown, relying on the I2C core
to handle it. However, this creates a window where debugfs files are
still accessible after edt_ft5x06_ts_teardown_debugfs() frees
tsdata->raw_buffer.
To prevent a use-after-free, protect the freeing of raw_buffer with the
device mutex and set raw_buffer to NULL. The debugfs read function
already checks if raw_buffer is NULL under the same mutex, so this
safely avoids the use-after-free.
Fixes: 68743c500c ("Input: edt-ft5x06 - use per-client debugfs directory")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/adnJicDh-bTUaWXP@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=FFRz
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
Convert the Mikrotik RouterBoard RB532 to use GPIO descriptors
by defining a software node for the GPIO chip, then register
the button platform device with full info passing the GPIO
as a device property.
This can be used as a base to move more of the RB532 devices
over to passing GPIOs using device properties.
Use the GPIO_ACTIVE_LOW flag and drop the inversion in the
rb532_button_pressed() function.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
- a fix for circular locking dependency in uinput
- a fix for potential corruption of uinput event queue
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCadnMIgAKCRBAj56VGEWX
nIq2AP9KokKsXT2JwF6E/V9/eQiCXUija5lVu0eUUmjc5CpbvwEA8OTkbCgkHt62
Vux7F+drj4w5p13Fxj0+pgztZW1pfQc=
=KHyc
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Two fixes for force feedback handling in uinput driver:
- fix circular locking dependency in uinput
- fix potential corruption of uinput event queue"
* tag 'input-for-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: uinput - take event lock when submitting FF request "event"
Input: uinput - fix circular locking dependency with ff-core
To avoid racing with FF playback events and corrupting device's event
queue take event_lock spinlock when calling uinput_dev_event() when
submitting a FF upload or erase "event".
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://patch.msgid.link/adXkf6MWzlB8LA_s@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The `ims_pcu_process_data()` processes incoming URB data byte by byte.
However, it fails to check if the `read_pos` index exceeds
IMS_PCU_BUF_SIZE.
If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE,
`read_pos` will increment indefinitely. Moreover, since `read_pos` is
located immediately after `read_buf`, the attacker can overwrite
`read_pos` itself to arbitrarily control the index.
This manipulated `read_pos` is subsequently used in
`ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to a
heap buffer overflow.
Specifically, an attacker can overwrite the `cmd_done.wait.head` located
at offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`.
Consequently, when the driver calls `complete(&pcu->cmd_done)`, it
triggers a control flow hijack by using the manipulated pointer.
Fix this by adding a bounds check for `read_pos` before writing to
`read_buf`. If the packet is too long, discard it, log a warning,
and reset the parser state.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Co-developed-by: Sanghoon Choi <csh0052@gmail.com>
Signed-off-by: Sanghoon Choi <csh0052@gmail.com>
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://patch.msgid.link/20251221211442.841549-2-eeodqql09@gmail.com
[dtor: factor out resetting packet state, reset checksum as well]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is a PS/2 mouse interface chip from Chips & Technologies that was
used in TI TravelMate and Gateway Nomad laptops, which used 386 and 486
CPUs. With 486 support being removed from the kernel (and 386 support is
long gone) it is time to retire this driver as well.
Remove the driver.
Link: https://patch.msgid.link/20240808172733.1194442-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This touchscreen controller was used om Gateway AOL Connected Touchpad
released in 2000 and, according to Wikipedia, removed from the market
in October 2001 due to slow sales.
It looks like it can still be bought on eBay for $1000 but I really
doubt anyone will actually use it.
Remove the driver.
Link: https://patch.msgid.link/20240808172733.1194442-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Bus mice use specialized bus interface implemented via an ISA add-in
cards. They were superseded by PS/2 and later USB.
Kconfig entry for the Logitech bus mice states that they "are rather
rare these days". This statement was true in 2002 and is no less true
in 2024.
Remove the driver.
Link: https://patch.msgid.link/20240808172733.1194442-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Inport (ATI XL and Microsoft) mice use specialized bus interface
implemented via an ISA add-in card. Have been superseded by PS/2 and
then USB, and are historical curiosity by now.
Remove the driver.
Link: https://patch.msgid.link/20240808172733.1194442-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Inline the i2c_check_functionality() check, since the function returns a
boolean status rather than an error code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260408141926.1181389-4-thorsten.blum@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Inline the i2c_check_functionality() check, since the function returns a
boolean status rather than an error code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260408141926.1181389-3-thorsten.blum@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
A lockdep circular locking dependency warning can be triggered
reproducibly when using a force-feedback gamepad with uinput (for
example, playing ELDEN RING under Wine with a Flydigi Vader 5
controller):
ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex
The cycle is caused by four lock acquisition paths:
1. ff upload: input_ff_upload() holds ff->mutex and calls
uinput_dev_upload_effect() -> uinput_request_submit() ->
uinput_request_send(), which acquires udev->mutex.
2. device create: uinput_ioctl_handler() holds udev->mutex and calls
uinput_create_device() -> input_register_device(), which acquires
input_mutex.
3. device register: input_register_device() holds input_mutex and
calls kbd_connect() -> input_register_handle(), which acquires
dev->mutex.
4. evdev release: evdev_release() calls input_flush_device() under
dev->mutex, which calls input_ff_flush() acquiring ff->mutex.
Fix this by introducing a new state_lock spinlock to protect
udev->state and udev->dev access in uinput_request_send() instead of
acquiring udev->mutex. The function only needs to atomically check
device state and queue an input event into the ring buffer via
uinput_dev_event() -- both operations are safe under a spinlock
(ktime_get_ts64() and wake_up_interruptible() do not sleep). This
breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in
the lock ordering and cannot form cycles with mutexes.
To keep state transitions visible to uinput_request_send(), protect
writes to udev->state in uinput_create_device() and
uinput_destroy_device() with the same state_lock spinlock.
Additionally, move init_completion(&request->done) from
uinput_request_send() to uinput_request_submit() before
uinput_request_reserve_slot(). Once the slot is allocated,
uinput_flush_requests() may call complete() on it at any time from
the destroy path, so the completion must be initialised before the
request becomes visible.
Lock ordering after the fix:
ff->mutex -> state_lock (spinlock, leaf)
udev->mutex -> state_lock (spinlock, leaf)
udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)
Fixes: ff46255123 ("Input: uinput - switch to the new FF interface")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CABXGCsMoxag+kEwHhb7KqhuyxfmGGd0P=tHZyb1uKE0pLr8Hkg@mail.gmail.com/
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://patch.msgid.link/20260407075031.38351-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Palm Top PC 110 is a handheld personal computer with 80486SX CPU that was
released exclusively in Japan in September 1995.
While the kernel still supports 486 CPU it is highly unlikely that anyone
is using this device with the latest kernel.
Remove the driver.
[bhelgaas: since this was posted, "x86/cpu: Remove M486/M486SX/ELAN
support" has been queued for v7.1, so pc110pad is no longer relevant:
https://lore.kernel.org/all/20251214084710.3606385-2-mingo@kernel.org/]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20240808172733.1194442-4-dmitry.torokhov@gmail.com
aiptek_irq() derives macro key indices directly from tablet reports and
then uses them to index macroKeyEvents[]. Report types 4 and 5 also save
the derived value in aiptek->lastMacro and later use that state to
release the previous key.
Validate the raw macro index once before it enters that state machine, so
lastMacro only ever stores an in-range macro key. Keep direct bounds
checks for report type 6, which reads the macro number from the packet
body and uses it immediately.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260329001711.88076-1-pengpeng@iscas.ac.cn
[dtor: fix macro fallback in report 5s to use -1]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
gf2k_read() decodes the hat position from a 4-bit field and uses it
directly to index gf2k_hat_to_axis[]. The lookup table only has nine
entries, so malformed packets can read past the end of the fixed table.
Skip hat reporting when the decoded value falls outside the lookup
table instead of forcing it to the neutral position. This keeps the
fix local and avoids reporting a made-up axis state for malformed
packets.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260407120001.1-gf2k-v2-pengpeng@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- new IDs for BETOP BTP-KP50B/C and Razer Wolverine V3 Pro added to
xpad controller driver
- another quirk for new TUXEDO InfinityBook added to i8042
- a small fixup for Synaptics RMI4 driver to properly unlock mutex when
encountering an error in F54
- an update to bcm5974 touch controller driver to reliably switch into
wellspring mode.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCadCpLQAKCRBAj56VGEWX
nDgsAP0UYEFs1rFYYESyaTJVkbUg1DVxbqzFkL69MJasfFDLRQD/dM3ZECzCatiU
IIOXbWw+0kwNR3bysSp3RQ2jQoeS6gQ=
=Rs1H
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- new IDs for BETOP BTP-KP50B/C and Razer Wolverine V3 Pro added to
xpad controller driver
- another quirk for new TUXEDO InfinityBook added to i8042
- a small fixup for Synaptics RMI4 driver to properly unlock mutex when
encountering an error in F54
- an update to bcm5974 touch controller driver to reliably switch into
wellspring mode
* tag 'input-for-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - add support for BETOP BTP-KP50B/C controller's wireless mode
Input: xpad - add support for Razer Wolverine V3 Pro
Input: synaptics-rmi4 - fix a locking bug in an error path
Input: i8042 - add TUXEDO InfinityBook Max 16 Gen10 AMD to i8042 quirk table
Input: bcm5974 - recover from failed mode switch
Add device IDs for the Razer Wolverine V3 Pro controller in both
wired (0x0a57) and wireless 2.4 GHz dongle (0x0a59) modes.
The controller uses the Xbox 360 protocol (vendor-specific class,
subclass 93, protocol 1) on interface 0 with an identical 20-byte
input report layout, so no additional processing is needed.
Signed-off-by: Zoltan Illes <zoliviragh@gmail.com>
Link: https://patch.msgid.link/20260329220031.1325509-1-137647604+ZlordHUN@users.noreply.github.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
All items in the TODO block have since been addressed: axis tuning,
analog button handling, rumble support, and dance pad USB IDs are all
implemented. The manual changelog is also removed as history is tracked
in git.
Signed-off-by: Elliot Tester <elliotctester1@gmail.com>
Link: https://patch.msgid.link/20260325221618.135833-1-elliotctester1@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the common USB helpers for looking up bulk and interrupt endpoints
(and determining endpoint numbers) instead of open coding.
Note that the NEXIO data interface has two bulk endpoints (see commit
5197424cdc ("Input: usbtouchscreen - add NEXIO (or iNexio) support")
for the descriptors).
The lookup in probe handles both bulk-in and interrupt-in endpoints and
was added to handle NEXIO devices. Replace the open coded lookup with a
lookup for the common interrupt endpoint and an explicit fallback
accepting a bulk endpoint.
This iterates over the (two) endpoints twice for NEXIO devices but makes
it more clear what is going on.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260401082212.2180434-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for the I2C-connected Awinic AW86938 LRA haptic controller.
The AW86938 has a similar but slightly different register layout. In
particular, the boost mode register values.
The AW86938 also has some extra features that aren't implemented
in this driver yet.
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Link: https://patch.msgid.link/20260302-aw86938-driver-v4-3-92c865df9cca@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Previously the gain value was hardcoded. Take the magnitude passed via
the input API and configure the gain register accordingly.
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Link: https://patch.msgid.link/20260302-aw86938-driver-v4-1-92c865df9cca@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the common USB helper for looking up interrupt-in endpoints instead
of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330095948.1663141-4-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the common USB helpers for looking up interrupt-in endpoints (and
determining endpoint numbers) instead of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330095948.1663141-3-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the common USB helper for looking up interrupt-in endpoints instead
of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330095948.1663141-2-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver uses its own definitions for HID requests.
This leads to duplication and obfuscation. Use HID's
definitions.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260325143256.371854-2-oneukum@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver uses its own definitions for HID requests.
This leads to duplication and obfuscation. Use HID's
definitions.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260325143256.371854-1-oneukum@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Without a reported resolution, userspace was assuming 1 unit/mm which
is wildly wrong: a regular smartphone is clearly not 2.4 meters tall.
Most applications do not care much for this kind of raw mm value,
but Phosh's on-screen keyboard would accidentally trigger swipe-to-close
gestures due to misinterpreting small movements as huge ones.
Do what the older goodix.c driver does and set the resolution to 10
units/mm to make sure the numbers calculated by userspace are reasonable.
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20260321073242.556253-1-val@packett.cool
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of requesting interrupt normally and immediately disabling it
with call to disable_irq() use IRQF_NOAUTOEN to keep it disabled until
it is needed. This avoids a tiny window when interrupt is enabled but
not needed.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Also use list_first_entry() instead of list_entry() to emphasize intent.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Also stop trying to check if input device is opened/in use in the
interrupt handler - the interrupt is disabled when device is closed or
suspended.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(fwnode_handle) cleanup facility to ensure that references to
acquired fwnodes are dropped at appropriate times automatically.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Do not define or use iqs5xx_ihex_rec structure: the original code was
using just a couple of fields in it and instead used it to calculate
offset to record data. The data field was actually reserving space for
checksum.
Instead iterate through fields and advance pointer explicitly.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Note that callers of exc3000_vendor_data_request() always expect
response, so it was adjusted to always wait for it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Also fix the touchscreen not being marked as suspended when noone has
opened/is using it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI Atlas button driver to a platform
one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3429591.aeNJFYEL58@rafael.j.wysocki
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Enable doubletap functionality by default on TrackPoint devices that
support it. The feature is detected using firmware ID pattern matching
(PNP: LEN03xxx) with a deny list of incompatible devices.
This provides immediate doubletap functionality without requiring
userspace configuration. The hardware is enabled during device
detection, while event filtering continues to be handled by the
thinkpad_acpi driver as before.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260311143144.482145-2-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The only user of psmouse_queue_work() and therefore kpsmoused workqueue
is psmouse-base itself, when it tries to schedule the resync work. Since
resyncing is not going to race with itself we no longer need the
dedicated ordered workqueue.
Remove it and switch to using regular (non-delayed) work structure
scheduled on the default workqueue.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Registering supplemental bare PS/2 device does not need to be ordered
relative to attempt to resynchronization done in psmouse core.
Switch to the default workqueue and use normal (non-delayed) work.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The original code uses flush_workqueue() in psmouse_disconnect() to
ensure the completion of both resync_work and dev3_register_work.
Given that alps_disconnect() already uses disable_delayed_work_sync()
to cancel dev3_register_work, replacing flush_workqueue() with
disable_delayed_work_sync(&psmouse->resync_work) is more robust
and efficient.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/6e40a46e5d9e6e3237702958b8f641263c28d2e4.1765939397.git.duoming@zju.edu.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The protocol flavor for ALPS touchpads found in OLPC laptops has been
broken since 2015 commit c378b5119e ("Input: psmouse - factor out
common protocol probing code") that forgot to add hgpk_init() to HGPK
entry in psmouse_protocols array.
Since nobody complained for 10 years let's remove it.
Acked-by: Andres Salomon <dilinger@queued.net>
Link: https://patch.msgid.link/abC5U_JigA9TrGYu@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmmuDMYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGLO4IAJ5kpRUi1STiqseb
bLawF3gehuZp8VPAYnJsACYXN7kMx9OQJ2SE4Y0Y16ZlHtS1TTvsEAhwSTyYH7Jc
hb1iSfoN1kxgDh2U3yZZJz9+DzQh6/YCDXJjyhpSgWOejhaYe7r7er5xqdKpGgVx
6hlvN92/c1m7aqMjKNXeD7YKoXn35FzwPYQAyksJdwMWbq27HE1Vb42PHht21yUX
1ndEUw0UMYH3IrDON+7QtE/aXW1PlLLeQWPDpG9y5FhoseZFEcNkm5NVYshuZ8L4
WZj3Q5IvQ/zj9DuwagW4Gab9XwzKIWSXuuSLRyQzv+OcAyITiC+Uo3z55TFmvXs7
2DOHBkY=
=depW
-----END PGP SIGNATURE-----
Merge tag 'v7.0-rc3' into next
Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.
The driver currently calls device_init_wakeup() and manually toggles
IRQ wake in suspend and resume paths. This is unnecessary since the
I2C core already handles wakeup configuration when the device is
described in Device Tree with the "wakeup-source" property.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260309071413.92709-1-phucduc.bui@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of using "unsigned short" and "unsigned char" for holding 16-bit
and 8-bit data, switch to using common in kernel u16 and u8.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Annotating the temporary keymap pointer as __free(kfree) ensures that it
will get released when exiting the function and explicit freeing in all
the return paths can be removed.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The SCANCODE() macro extracts a 16-bit value (0..65535) from firmware
device property data, but atkbd_get_keymap_from_fwnode() uses it
directly to index atkbd->keycode[], which only has ATKBD_KEYMAP_SIZE
(512) elements. A firmware-supplied scancode >= 512 causes a heap
out-of-bounds write that can corrupt adjacent struct atkbd fields and
neighboring slab objects.
Add a bounds check that rejects the entire firmware keymap if any entry
contains an out-of-range scancode, consistent with the validation
performed by matrix_keypad_parse_keymap() in drivers/input/matrix-keymap.c
for the same "linux,keymap" property format. When rejected, the driver
falls back to the default keycode table.
Fixes: 9d17ad2369 ("Input: atkbd - receive and use physcode->keycode mapping from FW")
Signed-off-by: Ariel Silver <arielsilver77@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Lock f54->data_mutex when entering the function statement since jumping
to the 'error' label when checking report_size fails causes that mutex
to be unlocked.
This bug has been detected by the Clang thread-safety checker.
Fixes: 3a762dbd53 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223215118.2154194-16-bvanassche@acm.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Now that we know the upper bound for the number of columns, and know
that it is pretty small, there is no point in allocating it separately.
We are wasting more memory tracking the allocations.
Embed valid_keys and old_kb_state directly into cros_ec_keyb structure.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260222003717.471977-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Introduce temporaries for event_data pointer and event_size to simplify
the code a bit.
In cros_ec_keyb_compute_valid_keys() explicitly compare with
KEY_RESERVED to make the intent of the comparison more clear.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260222003717.471977-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for handling an Fn button and sending separate keycodes for
a subset of keys in the matrix defined in the upper half of the keymap.
Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260222003717.471977-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Export input_default_setkeycode so that a driver can set a custom
setkeycode handler to take some driver specific action but still call
the default handler at some point.
Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260222003717.471977-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The device occasionally wakes up from suspend with missing input on the
internal keyboard and the following suspend attempt results in an instant
wake-up. The quirks fix both issues for this device.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260223142054.50310-1-wse@tuxedocomputers.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Inline i2c_check_functionality(), which really returns a bool and not an
error code, and remove the local variable. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260223000308.319335-1-thorsten.blum@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The driver acquires the 'vbat' regulator during probing but never enables
it. Consequently, in the suspend method, the driver disables the regulator
without enabling it first, causing an 'Unbalanced regulator_disable()'
error.
Enable the regulator in the probe() method and add the remove() method with
regulator disabling to fix this.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patch.msgid.link/20260215141435.727872-5-jekhor@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If something goes wrong during calibration (for instance, if the
'enable' GPIO was not properly defined), the GO bit may not be cleared
after some time, causing the driver to get stuck.
To prevent this, add a timeout check to the waiting loop and return an
error if it times out.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patch.msgid.link/20260215141435.727872-6-jekhor@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add ACPI ID for drv2604 haptics device found in Lenovo Yoga Book
YB1-X91L tablet.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patch.msgid.link/20260215141435.727872-4-jekhor@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add drv2604(L) and drv2605 to the list of supported I2C device IDs
for clarity.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patch.msgid.link/20260215141435.727872-2-jekhor@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
According to the data sheet, the st1332 contains a firmware, which may
be updated. The version and revision of the firmware may be read from
the registers of the device.
Read the firmware version and revision and report it to the log when
probing the device.
Suggested-by: Khalid Talash <ktalash@topcon.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Link: https://patch.msgid.link/20260123-input-st1232-firmware-version-v1-1-32df7eefdafe@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- support for FocalTech FT8112 added to i2c-hid driver
- support for FocalTech FT3518 added to edt-ft5x06 driver
- support for power buttons in TWL603x chips added to twl4030-pwrbutton
driver
- an update to gpio-decoder driver to make it usable on non-OF
platforms and to clean up the code
- an update to synaptics_i2c driver switching it to use managed
resources and a fix to restarting polling after resume
- an update to gpio-keys driver to fall back to getting IRQ from
resources if not specified using other means
- an update to ili210x driver to support polling mode
- a number of input drivers switched to scnprintf() to suppress
truncation warnings
- a number of updates and conversions of device tree bindings to yaml
format
- fixes to spelling in comments and messages in several drivers
- other assorted fixups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaZDuRwAKCRBAj56VGEWX
nMDgAQDru/JJP8OzAOzkBVBKv4gq2/Sgcd9gnIWdbLmOgk/vyQD9FkurIYZeiPOJ
8F/q0bhQPh72TlWF5mmD9A8PB48BFgs=
=0l6r
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for FocalTech FT8112 added to i2c-hid driver
- support for FocalTech FT3518 added to edt-ft5x06 driver
- support for power buttons in TWL603x chips added to twl4030-pwrbutton
driver
- an update to gpio-decoder driver to make it usable on non-OF
platforms and to clean up the code
- an update to synaptics_i2c driver switching it to use managed
resources and a fix to restarting polling after resume
- an update to gpio-keys driver to fall back to getting IRQ from
resources if not specified using other means
- an update to ili210x driver to support polling mode
- a number of input drivers switched to scnprintf() to suppress
truncation warnings
- a number of updates and conversions of device tree bindings to yaml
format
- fixes to spelling in comments and messages in several drivers
- other assorted fixups
* tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
dt-bindings: input: qcom,pm8941-pwrkey: Document PMM8654AU
dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038
Input: apbps2 - fix comment style and typos
Input: gpio_keys - fall back to platform_get_irq() for interrupt-only keys
Input: novatek-nvt-ts - drop wake_type check
dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells'
Input: ili210x - add support for polling mode
dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek
Input: appletouch - fix potential race between resume and open
HID: i2c-hid: Add FocalTech FT8112
dt-bindings: input: i2c-hid: Introduce FocalTech FT8112
Input: synaptics_i2c - switch to using managed resources
Input: synaptics_i2c - guard polling restart in resume
Input: gpio_decoder - don't use "proxy" headers
Input: gpio_decoder - make use of the macros from bits.h
Input: gpio_decoder - replace custom loop by gpiod_get_array_value_cansleep()
Input: gpio_decoder - unify messages with help of dev_err_probe()
Input: gpio_decoder - make use of device properties
Input: serio - complete sizeof(*pointer) conversions
Input: wdt87xx_i2c - switch to use dev_err_probe()
...
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
To allow transitioning away from gpio-keys platform data attempt to
retrieve IRQ for interrupt-only keys using platform_get_irq_optional()
if interrupt is not specified in platform data.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a couple quirks to i8042 to enable keyboard on a Asus and MECHREVO
laptops.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaXWxMAAKCRBAj56VGEWX
nMznAQDw4ewqL3q8ere2waxxBS8AHzT9EhD7hwCsU2vA8BmerwD/cnaYaYk9rLyI
siZkL7+tJHnptiqoakg72Ol9Y4RjGA0=
=18Ic
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple of quirks to i8042 to enable keyboard on a Asus and MECHREVO
laptops
* tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add quirks for MECHREVO Wujie 15X Pro
Input: i8042 - add quirk for ASUS Zenbook UX425QA_UM425QA
The MECHREVO Wujie 15X Pro requires several i8042 quirks to function
correctly. Specifically, NOMUX, RESET_ALWAYS, NOLOOP, and NOPNP are
needed to ensure the keyboard and touchpad work reliably.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-3-550230171hxy@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The ASUS Zenbook UX425QA_UM425QA fails to initialize the keyboard after
a cold boot.
A quirk already exists for "ZenBook UX425", but some Zenbooks report
"Zenbook" with a lowercase 'b'. Since DMI matching is case-sensitive,
the existing quirk is not applied to these "extra special" Zenbooks.
Testing confirms that this model needs the same quirks as the ZenBook
UX425 variants.
Signed-off-by: feng <alec.jiang@gmail.com>
Link: https://patch.msgid.link/20260122013957.11184-1-alec.jiang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The wake_type parameter from touchscreen registers is not used for
anything functional - the driver only validates that it matches a
hard-coded expected value per chip variant. This causes probe to fail
on touchscreens that report a different wake_type despite being
otherwise compatible.
Drop the wake_type check and the associated chip data member to allow
the existing compatibles to work with more touchscreen variants.
Signed-off-by: Gianluca Boiano <morf3089@gmail.com>
Suggested-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20260122001040.76869-1-morf3089@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are designs incorporating Ilitek ILI2xxx touch controller that
do not connect interrupt pin, for example Waveshare 13.3" DSI display.
To support such systems use polling mode for the input device when I2C
client does not have interrupt assigned to it.
Factor out ili210x_firmware_update_noirq() to allow conditional scoped
guard around this code. The scoped guard has to be applied only in case
the IRQ line is connected, and not applied otherwise.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260121230736.114623-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Take the input device's mutex in atp_resume() and atp_recover() to make
sure they are not racing with open and close methods, and use
input_device_enabled() helper to see if communication with the device
needs to be restarted after resume.
Link: https://patch.msgid.link/uuwucixxc2ckd6ul6yv5mdvkc3twytg4tg5a5vhfqg6m2qcodc@klaco6axglbm
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use managed resources (devm_*) which simplifier
error handling and allows removing synaptics_i2c_remove() methods form
the driver.
Rename "ret" to "error" where makes sense while at it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
synaptics_i2c_resume() restarts delayed work unconditionally, even when
the input device is not opened. Guard the polling restart by taking the
input device mutex and checking input_device_enabled() before re-queuing
the delayed work.
Fixes: eef3e4cab7 ("Input: add driver for Synaptics I2C touchpad")
Signed-off-by: Minseong Kim <ii4gsp@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260121063738.799967-1-ii4gsp@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is a custom loop that repeats parts of gpiod_get_array_value_cansleep().
Use that in conjunction with bitmap API to make code shorter and easier to
follow.
With this done, add an upper check for amount of GPIOs given based on
the driver's code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113154616.3107676-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Complete the sizeof(*pointer) conversion for arc_ps2, altera_ps2, and
olpc_apsp drivers. This follows the cleanup initiated in commit
06b449d7f7 ("Input: serio - use sizeof(*pointer) instead of sizeof(type)).
Signed-off-by: Wentong Tian <tianwentong2000@gmail.com>
Link: https://patch.msgid.link/20260112162709.89515-1-tianwentong2000@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch to use dev_err_probe() to simplify the error path and
unify a message template. With that being done, drop the now no-op
message for -ENOMEM as allocator will print a big warning anyway
and remove duplicate message for devm_request_threaded_irq().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082445.44186-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082941.90006-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082938.89437-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082935.88801-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082931.88083-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082926.87049-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082921.86167-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082917.85109-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082912.84123-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082905.83718-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082901.83668-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082856.83617-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082851.83584-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113082845.83550-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver also works with FT3518, which supports up to 10 touch points.
Add compatible data for it.
Co-developed-by: Kamil Gołda <kamil.golda@protonmail.com>
Signed-off-by: Kamil Gołda <kamil.golda@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yedaya Katsman <yedaya.ka@gmail.com>
Link: https://patch.msgid.link/20260118-touchscreen-patches-v3-2-1c6a729c5eb4@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a quirk for i8042 to better handle another TUXEDO model
- a quirk to atkbd to handle incorcet behavior of HONOR FMB-P internal
keyboard
- a definition for a new ABS_SND_PROFILE event
- fixes to alps and lkkbd drivers to reliably shut down pending work on
removal
- a fix to apple_z2 driver tightening input report parsing
- a fix for "off-by-one" error when validating config in ti_am335x_tsc
driver
- addition of CRKD Guitars device IDs to xpad driver.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaUeyQQAKCRBAj56VGEWX
nDlZAQCLkGoaHMX6i6Wi2iQIKexRxlERp386vaa2nA4/La3L2wEA1Ce01Ve72v+k
JyVplQCihOzAxDZ8+c2dGtLSwqR8fQY=
=ycHD
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a quirk for i8042 to better handle another TUXEDO model
- a quirk to atkbd to handle incorcet behavior of HONOR FMB-P internal
keyboard
- a definition for a new ABS_SND_PROFILE event
- fixes to alps and lkkbd drivers to reliably shut down pending work on
removal
- a fix to apple_z2 driver tightening input report parsing
- a fix for "off-by-one" error when validating config in ti_am335x_tsc
driver
- addition of CRKD Guitars device IDs to xpad driver.
* tag 'input-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - fix off-by-one error in wire_order validation
Input: xpad - add support for CRKD Guitars
Input: add ABS_SND_PROFILE
Input: apple_z2 - fix reading incorrect reports after exiting sleep
Input: alps - fix use-after-free bugs caused by dev3_register_work
Input: i8042 - add TUXEDO InfinityBook Max Gen10 AMD to i8042 quirk table
Input: atkbd - skip deactivate for HONOR FMB-P's internal keyboard
Input: lkkbd - disable pending work before freeing device
The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.
Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251114062817.852698-1-junjie.cao@intel.com
Fixes: bb76dc09dd ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
