The ilitek touchscreen driver uses the non-sleeping gpiod_set_value
function for reset.
Switch to using gpiod_set_value_cansleep() when controlling reset_gpio to
support GPIO providers that may sleep, such as I2C GPIO expanders.
Further switch the mdelay calls on the reset path to fsleep (preferred
in non-atomic contexts).
This fixes noisy complaints in kernel log for gpio providers that do
sleep.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20251201-imx8mp-hb-iiot-v4-2-53a4cd6c21bf@solid-run.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Under certain conditions (more prevalent after a suspend/resume cycle),
the touchscreen controller can send the "boot complete" interrupt before
it actually finished booting. In those cases, attempting to read touch
data resuls in a stream of "not ready" messages being read and
interpreted as a touch report. Check that the response is in fact a
touch report and discard it otherwise.
Reported-by: pitust <piotr@stelmaszek.com>
Closes: https://oftc.catirclogs.org/asahi/2025-12-17#34878715;
Fixes: 471a92f8a2 ("Input: apple_z2 - add a driver for Apple Z2 touchscreens")
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://patch.msgid.link/20251218-z2-init-fix-v1-1-48e3aa239caf@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20251215-fts-fixes-v1-3-8c1e3a63ebf1@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
No functional change.
Fixes: 78bcac7b2a ("Input: add support for the STMicroelectronics FingerTip touchscreen")
Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20251215-fts-fixes-v1-2-8c1e3a63ebf1@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We're trying to enable regulator, not disable it.
Fixes: 78bcac7b2a ("Input: add support for the STMicroelectronics FingerTip touchscreen")
Suggested-by: Petr Hodina <petr.hodina@protonmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20251215-fts-fixes-v1-1-8c1e3a63ebf1@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmksyEIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGuRUH/i5oyGqw5tJmyAKa
N+RZ1zU/d9NnuYVhHylRFXxIQY+ZqjQMF82meEJP3zZn7c73LDQEtcSuygrmtbmm
66TpfU3KJSK5YCYFT9kL9D3IAMpHoOk5smyp1KxVNIfLO5qT7fiWFlEvvWjjb+7/
oJAa3iX6uFtoeBHuGBUU/r6etoL8rE6H3uGZloA09+AMc+CF36vHloW5Mq7++51p
HFfge8mAqKXF5ZayCG9+I+6nwK277MfVmgcz4PIvHQQhPUa9CMvy96CWnObQo8lP
GpNlLf92A/C5S5DsMgVjFDf4MBSsE1hiFLxu3kKPzl8L41uvg/aiMIJqc1BIeZjw
/Okl7wo=
=lz6b
-----END PGP SIGNATURE-----
Merge tag 'v6.18' into next
Sync up with the mainline to bring in the latest APIs.
DT binding (ti,am3359-tsc.yaml) sets ti,coordinate-readouts to a
maximum of 6. The MFD parent also enforces that
(readouts * 2 + 2) + adc_channels <= 16 and fails probe if this
is violated, so the touchscreen subdriver will not even probe
in those cases.
Clamp coordinate_readouts > 6 to 6 in the subdriver to align with the
binding and keep behavior sane if invalid platform data bypasses schema
checks. Keep the existing default to 5 for non-positive values.
No functional change with valid DT.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251117032358.891822-1-junjie.cao@intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmkaT2IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGnakIAIq6O35+abAlDGe7
n8IwX/4hwDJ9Ol2vddg6jTdio3szSlvcXRAyijkG35etLap+i+Q78Q9H1fRcQ8CF
5t9kfs5oCVWEDlsHMI+Q38vYB3tWikaIUIuao6pH5U50fsA0KM/287TLYdzvmBsK
gy0BHoZhl++xdMsD2HNwt08RrK/IyY+Zp9i7pKhcsxJiJCgy8nq5ZxhmRPbqTKNc
IqIBPzG+UYcOd88Iz377Ax+TnzWaTpwyvfaiU8DVFMN0FeENdk1FY8ClYfpYxCDH
Pm5NzL/f54VtdZ3aL1fKmYwWN7WFJT4FH3l6DOvtCc+Gx3KW1a3Y508CbqYBXvgY
QV4oH4Y=
=iSoY
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc6' into for-linus
Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just
return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://patch.msgid.link/20250822034751.244248-3-zhao.xichao@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR()
This patch fixes this cocci report:
./cyttsp5.c:927:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20251013-ptr_err-v1-1-2c5efbd82952@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The reset line is being set to input on non-ACPI devices apparently to
save power. This isn't being done on ACPI devices as it's been found
that some ACPI devices don't have a pull-up resistor fitted. This can
also be the case for non-ACPI devices, resulting in:
[ 941.672207] Goodix-TS 1-0014: Error reading 10 bytes from 0x814e: -110
[ 942.696168] Goodix-TS 1-0014: Error reading 10 bytes from 0x814e: -110
[ 945.832208] Goodix-TS 1-0014: Error reading 10 bytes from 0x814e: -110
This behaviour appears to have been initialing introduced in
ec6e1b4082. This doesn't seem to be based on information in either the
GT911 or GT9271 datasheets cited as sources of information for this
change. Thus it seems likely that it is based on functionality in the
Android driver which it also lists. This behaviour may be viable in very
specific instances where the hardware is well known, but seems unwise in
the upstream kernel where such hardware requirements can't be
guaranteed.
Remove this over optimisation to improve reliability on non-ACPI
devices.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20251009134138.686215-1-martyn.welch@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a number of conversions to yaml/json schema and fixes for
input-related device tree bindings
- a new driver for Awinic AW86927 haptic chip
- a new driver for Hynitron CST816x series controller
- a new driver for add Himax HX852x(ES) touchscreen controller
- a fix to uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- a fix to prevent overflow in pressure calculation in tsc2007 driver
causing phantom touches
- a change to Atmel maxTouch driver to support generic touchscreen
configuration (flip, rotate, etc.)
- support for platform data was dropped in tca8418_keypad,
pxa27x-keypad, spear-keyboard and twl4030_keypad drivers, they all
now rely on generic device properties for configuration
- other assorted changes and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaOX1HQAKCRBAj56VGEWX
nC29AQCsDm6HBKXJZl6nAI8WHQiSvASFvyFlF6scVnfueX54mQEA6eE428+Cr1Sn
mDiwL38Es+PlZbdsi0J2q0vYzpr4yQU=
=JZIn
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
The reset GPIO is not toggled in any critical section where it couldn't
sleep, allow the reset GPIO to sleep. This allows the driver to operate
reset GPIOs connected to I2C GPIO expanders.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://lore.kernel.org/r/20251005023335.166483-1-marek.vasut@mailbox.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Introduce support for the Hynitron CST816x series touchscreen controller
used for 240×240 1.28-inch Round LCD Display Module manufactured
by Waveshare Electronics. The driver is designed based on an Arduino
implementation marked as under MIT License. This driver is written
for a particular round display based on the CST816S controller, which
is not compatiable with existing driver for Hynitron controllers.
Signed-off-by: Oleh Kuzhylnyi <kuzhylol@gmail.com>
Link: https://lore.kernel.org/r/20250921125939.249788-2-kuzhylol@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Set the glitch threshold by DTS property and keep the existing default
behavior if the 'debounce-delay-us' is not present.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250923143746.2857292-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This provides support for generic touchscreen configuration options like
swapped-x-y, min-x, min-y, size-x, size-y, etc.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250909054903.11519-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a simple driver for the Himax HX852x(ES) touch panel controller,
with support for multi-touch and capacitive touch keys.
The driver is somewhat based on sample code from Himax. However, that
code was rather confusing, so that we spent a significant amount of
time just trying to understand the packet format and register commands.
In this driver they are described with clean structs and defines rather
than magic numbers and offset calculations.
Co-developed-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20250915-hx852x-v5-2-b938182f1056@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
mc13xxx_irq_ack() got deprecated and became dead code with commit
10f9edaeaa ("mfd: mc13xxx: Use regmap irq framework for interrupts").
It should be safe to remove it now.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://lore.kernel.org/r/20250811064358.1659-1-akurz@blala.de
Signed-off-by: Lee Jones <lee@kernel.org>
The touch resistance calculation in the tsc2007 driver is prone to
overflow if (z2 - z1) is large and also x is reasonably big. This
overflow results in the driver emitting input events when very little
touch pressure is applied. In these events the x and y coordinates can
be substantially off.
Avoid the overflow by using u64 when calculating resistance value.
Signed-off-by: Johannes Kirchmair <johannes.kirchmair@skidata.com>
Link: https://lore.kernel.org/r/20250129-fix_tsc_calculation_overflow-v2-1-9e51333496ad@skidata.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In case tsc2007 is used as an ADC sensor there will be no interrupt
provided at all, so set up an interrupt only if one is present.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since pen GPIO request is optional, there is no reason to throw dev_warn if
such GPIO is not defined.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-2-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
A number of modules in the input subsystem use EXPORT_SYMBOL() and
friends without explicitly including the corresponding header
<linux/export.h>. While the build currently succeeds due to this header
being pulled in transitively, this is not guaranteed to be the case in
the future.
Let's add the explicit include to make the dependencies clear and
prevent future build breakage.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
- updates to several drivers consuming GPIO APIs to use setters
returning error codes
- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver
- an update to AT/PS2 keyboard driver to map F13-F24 by default
- Samsung keypad driver got a facelift
- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info
- 2 new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver
- support for polling mode in Goodix touchscreen driver
- support for support for FocalTech FT8716 in edt-ft5x06 driver
- support for MT6359 in mtk-pmic-keys driver
- removal of pcf50633-input driver since platform it was used on is gone
- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers
- a new definition for "performance" key
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaJOUOwAKCRBAj56VGEWX
nPJTAQC1hrYgCv1L8hxUukbGH5FFPF2nlk63U78izh/dd7R9fwD+OqrQT7+IEr/5
VBqxiqdy77R1mmYs8RpmjOSTg0MEwwg=
=jm8o
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- updates to several drivers consuming GPIO APIs to use setters
returning error codes
- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver
- an update to AT/PS2 keyboard driver to map F13-F24 by default
- Samsung keypad driver got a facelift
- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info
- two new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver
- support for polling mode in Goodix touchscreen driver
- support for support for FocalTech FT8716 in edt-ft5x06 driver
- support for MT6359 in mtk-pmic-keys driver
- removal of pcf50633-input driver since platform it was used on is
gone
- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers
- a new definition for "performance" key
* tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (38 commits)
HID: hid-steam: Use new BTN_GRIP* buttons
Input: add keycode for performance mode key
Input: max77693 - convert to atomic pwm operation
Input: st1232 - add touch-overlay handling
dt-bindings: input: touchscreen: st1232: add touch-overlay example
Input: touch-overlay - add touchscreen overlay handling
dt-bindings: touchscreen: add touch-overlay property
Input: atkbd - correctly map F13 - F24
Input: xpad - use new BTN_GRIP* buttons
Input: Add and document BTN_GRIP*
Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_*
Documentation: Fix capitalization of XBox -> Xbox
Input: synaptics-rmi4 - add support for F1A
dt-bindings: input: syna,rmi4: Document F1A function
Input: synaptics-rmi4 - add support for Forcepads (F21)
Input: mtk-pmic-keys - add support for MT6359 PMIC keys
Input: remove special handling of id->driver_info when matching
Input: evdev - switch matching to EV_SYN
Input: samsung-keypad - use BIT() and GENMASK() where appropriate
Input: samsung-keypad - use per-chip parameters
...
-----BEGIN PGP SIGNATURE-----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=Vo0F
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.
- DEBUGFS
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
- SYSFS
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
- Support cache-ids for device-tree systems
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
- Rust
- Device
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
- Misc
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaIjkhwAKCRBFlHeO1qrK
LpXuAP9RWwfD9ZGgQZ9OsMk/0pZ2mDclaK97jcmI9TAeSxeZMgD1FHnOMTY7oSIi
iG7Muq0yLD+A5gk9HUnMUnFNrngWCg==
=jgRj
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
Use touch-overlay to support overlay objects such as buttons and a
resized frame defined in the device tree.
A key event will be generated if the coordinates of a touch event are
within the area defined by the button properties.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-4-b292a1bbb0a1@wolfvision.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaGdm4wAKCRBAj56VGEWX
nJJxAPwMafYOIr+aW1+taLorp3FRyoFuh9Q4IZk9n3J2Dx/HGwD8CUpXDytgE+n7
BRMjXB7PPF9b35FjmKT8kTIHZxiTHAc=
=w9vL
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
* tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
Input: alps - use scnprintf() to suppress truncation warning
Input: iqs7222 - explicitly define number of external channels
Input: xpad - support Acer NGR 200 Controller
Input: xpad - return errors from xpad_try_sending_next_out_packet() up
Input: xpad - adjust error handling for disconnect
Input: apple_z2 - drop default ARCH_APPLE in Kconfig
Input: Fully open-code compatible for grepping
dt-bindings: HID: i2c-hid: elan: Introduce Elan eKTH8D18
Input: psmouse - switch to use scnprintf() to suppress truncation warning
Input: lifebook - switch to use scnprintf() to suppress truncation warning
Input: alps - switch to use scnprintf() to suppress truncation warning
Input: atkbd - switch to use scnprintf() to suppress truncation warning
Input: fsia6b - suppress buffer truncation warning for phys
Input: iqs626a - replace snprintf() with scnprintf()
This driver is compatible with the FocalTech FT8716 touchscreen, which
supports up to 10 concurrent touch points. Add a compatible for it.
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250313202017.19621-3-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the custom directory in debugfs root. Further
improvements by this change: support of multiple instances.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318091904.22468-1-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are designs incorporating Goodix touch controller that do not
connect interrupt pin, for example Raspberry Pi. To support such systems
use polling mode for the input device when I2C client does not have
interrupt assigned to it.
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250522020418.1963422-1-qijian.guo@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-input-v1-1-5875240b48d8@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250612-apple-kconfig-defconfig-v1-8-0e6f9cb512c1@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It is very useful to find driver implementing compatibles with `git grep
compatible`, so driver should not use defines for that string, even if
this means string will be effectively duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250613071653.46809-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell
Precision M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaCBDmQAKCRBAj56VGEWX
nA13AQCmVOo2PAJU2CtMxqwEVZMat0id/fk0Ro8aiW8JBzyzuwD/as/hMtOkAGyI
pUsaxLp7SlOUMq9YFlkbC/Ffe2GH2QQ=
=yrk/
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
The power control function ignores the "on" argument when setting the
report ID, and thus is always sending HID_POWER_SLEEP. This causes a
problem when trying to wakeup.
Fix by sending the state variable, which contains the proper HID_POWER_ON or
HID_POWER_SLEEP based on the "on" argument.
Fixes: 3c98b8dbdc ("Input: cyttsp5 - implement proper sleep and wakeup procedures")
Cc: stable@vger.kernel.org
Signed-off-by: Mikael Gonella-Bolduc <mgonellabolduc@dimonoff.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20250423135243.1261460-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When compile tested with W=1 on x86_64 with driver as built-in:
stmpe-ts.c:371:34: error: unused variable 'stmpe_ts_ids' [-Werror,-Wunused-const-variable]
Ideally this would be referenced from the platform_driver, but since
the compatible string is already matched by the mfd driver for its
parent device, that would break probing.
In this case, the of_device_id table just serves as a module alias
for loading the driver, while the device itself is probed using
the platform device name.
Remove the table and instead use a module alias that reflects how
the driver is actually probed.
Link: https://lore.kernel.org/lkml/20240403080702.3509288-8-arnd@kernel.org/
Link: https://lore.kernel.org/lkml/181dbdb8-c050-4966-8cb4-2f39495ff3f9@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250409122314.2848028-3-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current reset pulse width is measured to be 5us on a
Renesas RZ/G2L SOM. The manufacturer's minimum reset pulse width is
specified as 10us.
Extend reset pulse width to make sure it is long enough on all platforms.
Also reword confusing comments about reset pin assertion.
Fixes: 5b0c03e24a ("Input: Add driver for Cypress Generation 5 touchscreen")
Cc: stable@vger.kernel.org
Acked-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250410184633.1164837-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
1) Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
2) The final cleanup of the hrtimer_init() to hrtimer_setup() conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline and
all new users are catched.
Doing this right before rc1 ensures that new code which is merged post rc1
is not introducing new instances of the original functionality.
-----BEGIN PGP SIGNATURE-----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=8Ftq
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ/DJvwAKCRBAj56VGEWX
nIvGAQC9nGVCLQX7xO7saMfx5+4/jhkXgPTeDtRs59vNKIoEFAEAgW9DUKShtESV
WQlwkyzoRbAjC8suc2sc+bs4fJ60BQ0=
=xlqq
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips.
-----BEGIN PGP SIGNATURE-----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=ENMh
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips"
* tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
Input: tsc2007 - accept standard properties
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
The current implementation of the goodix_berlin driver lacks support for
revisions A and B of the Berlin IC. This change adds support for the
gt9897 IC, which is a Berlin-A revision part.
The differences between revision D and A are rather minor, a handful of
address changes and a slightly larger read buffer. They were taken from
the driver published by Goodix, which does a few more things that don't
appear to be necessary for the touchscreen to work properly.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250309062315.35720-3-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a dependency on ARCH_APPLE and clarify the description to make it
more obvious that this is for ARM machines, not x86 ones.
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250225-z2-kconfig-v1-1-a67d9b778a6c@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As per dt-bindings the property is called vddio-supply, so use the
correct name in the driver instead of iovdd. The datasheet also calls
the supply 'VDDIO'.
Fixes: 44362279bd ("Input: add core support for Goodix Berlin Touchscreen IC")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-2-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the statement above AVDD gets enabled, and not IOVDD, so fix this
copy-paste mistake.
Fixes: 44362279bd ("Input: add core support for Goodix Berlin Touchscreen IC")
Reported-by: Jens Reidel <adrian@travitia.xyz>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-1-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for imagis IST3038H, which seems mostly compatible with
IST3038C except that it reports a different chip ID value.
Tested on samsung,j5y17lte.
Signed-off-by: Andras Sebok <sebokandris2009@gmail.com>
Link: https://lore.kernel.org/r/20250224090354.102903-2-sebokandris2009@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241222-sysfs-const-bin_attr-input-v1-1-1229dbe5ae71@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds a driver for Apple touchscreens using the Z2 protocol.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250217-z2-v6-2-c2115d6e5a8f@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Link: https://lore.kernel.org/r/ec811552-6014-43d4-9fcc-2ac729a8b08e@xs4all.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
commit 767d83361a ("Input: ads7846 - Convert to use software nodes")
has simplified the code but accidentially converted a devm_gpiod_get()
to gpiod_get(). This leaves the gpio reserved on module remove and the
driver can no longer be loaded again.
Fixes: 767d83361a ("Input: ads7846 - Convert to use software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/6e9b143f19cdfda835711a8a7a3966e5a2494cff.1738410204.git.hns@goldelico.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As reported by the kernel test robot, the following warning occur:
>> drivers/input/touchscreen/wdt87xx_i2c.c:1166:36: warning: 'wdt87xx_acpi_id' defined but not used [-Wunused-const-variable=]
1166 | static const struct acpi_device_id wdt87xx_acpi_id[] = {
| ^~~~~~~~~~~~~~~
The 'wdt87xx_acpi_id' array is only used when CONFIG_ACPI is enabled.
Wrapping its definition and 'MODULE_DEVICE_TABLE' in '#ifdef CONFIG_ACPI'
prevents a compiler warning when ACPI is disabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501181549.uzdlBwuN-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20250119084312.1851486-1-eleanor15x@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114192701.912430-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Only some driver-specific properties were accepted, change it
to use the now-available standard properties which are
found in devicetrees containing this chip.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20241205204413.2466775-2-akemnade@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove() method
(from remove_new())
- updates to a number of input drivers to use the new cleanup facilities
(__free(...), guard(), and scoped-guard()) which ensure that the
resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ0PQIAAKCRBAj56VGEWX
nDFFAQCSj3Va9Y6ZgNFvjmPAoA3RmsrvydXMG6PuyHEEfvTtpgD9GPldve3MRqRr
VcrLJXMgyX2+RgpKm1W9ZQgK9Nudegs=
=Ry7d
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove()
method (from remove_new())
- updates to a number of input drivers to use the new cleanup
facilities (__free(...), guard(), and scoped-guard()) which ensure
that the resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
Input: mpr121 - use devm_regulator_get_enable_read_voltage()
Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
Input: spear-keyboard - don't include 'pm_wakeup.h' directly
Input: cypress-sf - constify struct i2c_device_id
Input: ads7846 - increase xfer array size in 'struct ser_req'
Input: fix the input_event struct documentation
Input: i8042 - fix typo dublicate to duplicate
Input: ads7846 - add dummy command register clearing cycle
Input: cs40l50 - fix wrong usage of INIT_WORK()
Input: introduce notion of passive observers for input handlers
Input: maple_keyb - use guard notation when acquiring mutex
Input: locomokbd - use guard notation when acquiring spinlock
Input: hilkbd - use guard notation when acquiring spinlock
Input: synaptics-rmi4 - switch to using cleanup functions in F34
Input: synaptics - fix a typo
dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
Input: omap-keypad - use guard notation when acquiring mutex
Input: imagis - fix warning regarding 'imagis_3038_data' being unused
Input: userio - remove unneeded semicolon
Input: sparcspkr - use cleanup facility for device_node
...
Clang warns (or errors with CONFIG_WERROR=y, trimmed for brevity):
drivers/input/touchscreen/ads7846.c:412:2: error: array index 6 is past the end of the array (that has type 'struct spi_transfer[6]') [-Werror,-Warray-bounds]
412 | req->xfer[6].tx_buf = &req->scratch;
| ^ ~
...
drivers/input/touchscreen/ads7846.c:416:2: error: array index 7 is past the end of the array (that has type 'struct spi_transfer[6]') [-Werror,-Warray-bounds]
416 | req->xfer[7].rx_buf = &req->scratch;
| ^ ~
drivers/input/touchscreen/ads7846.c:334:2: note: array 'xfer' declared here
334 | struct spi_transfer xfer[6];
| ^
Increase the size of xfer in 'struct ser_req' to ensure that there is
enough space for all necessary members and there are no out of bounds
accesses, clearing up the warning.
Fixes: 781a07da9b ("Input: ads7846 - add dummy command register clearing cycle")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20241111-input-ads7846-increase-xfer-array-size-v1-1-06cd92e9f20f@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On STM32MP135F with XPT2046 touch controller attached to SPI bus, it has
been observed that the touch controller locks up after Linux kernel has
finished booting. Adding a dummy cycle on the SPI bus seems to mitigate
the lock up.
The XPTEK XPT2046 controller seems to be an identical clone of TI TSC2046,
the datasheet seems to be a clone of the TI part as well, text seem to be
word to word identical, except all the pictures have been drawn again.
This touch controller is present e.g. on WaveShare 3.2inch RPi LCD (B)
panel, the DTO provided by WaveShare uses 50 kHz SPI clock for this
touch controller, which is unusually low and possibly might have been
used as some sort of workaround for an issue. The SPI LCD on the same
bus uses 16 MHz clock.
SPI bus DT properties spi-cs-setup-delay-ns, spi-cs-hold-delay-ns,
spi-cs-inactive-delay-ns, spi-rx-delay-us, spi-tx-delay-us set to
range of 500ns..5us seem to have no impact on the behavior of the
touch controller, the lock up always occurs. The STM32MP13xx SPI
controller users GPIO control for the nCS pins.
Since the dummy cycle happens after the controller has been put into
power down mode and both ADC and REF regulators have been disabled,
the cycle should have no impact on the configuration of the controller,
i.e. it should be a NOP.
It is unclear whether this problem is specific to this cloned XPT2046
controller, or whether this is also present on TSC2046. A test on
either TSC2046 or ADS7846 would be very welcome.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240320072533.170029-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a fix for regression in input core introduced in 6.11 preventing
re-registering input handlers
- a fix for adp5588-keys driver tyring to disable interrupt 0 at suspend
when devices is used without interrupt
- a fix for edt-ft5x06 to stop leaking regmap structure when probing
fails and to make sure it is not released too early on removal.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZycQwgAKCRBAj56VGEWX
nFgtAQDxuWplL+cwA5f3g+/Rq38faHBY5ebmsC9G/QnBZs4hTQD/dL04tU9NwvNq
GYw4MYRNaDIeY8vyq21Y+dQe0uL0rAM=
=xAeU
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for regression in input core introduced in 6.11 preventing
re-registering input handlers
- a fix for adp5588-keys driver tyring to disable interrupt 0 at
suspend when devices is used without interrupt
- a fix for edt-ft5x06 to stop leaking regmap structure when probing
fails and to make sure it is not released too early on removal.
* tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: fix regression when re-registering input handlers
Input: adp5588-keys - do not try to disable interrupt 0
Input: edt-ft5x06 - fix regmap leak when probe fails
The driver neglects to free the instance of I2C regmap constructed at
the beginning of the edt_ft5x06_ts_probe() method when probe fails.
Additionally edt_ft5x06_ts_remove() is freeing the regmap too early,
before the rest of the device resources that are managed by devm are
released.
Fix this by installing a custom devm action that will ensure that the
regmap is released at the right time during normal teardown as well as
in case of probe failure.
Note that devm_regmap_init_i2c() could not be used because the driver
may replace the original regmap with a regmap specific for M06 devices
in the middle of the probe, and using devm_regmap_init_i2c() would
result in releasing the M06 regmap too early.
Reported-by: Li Zetao <lizetao1@huawei.com>
Fixes: 9dfd9708ff ("Input: edt-ft5x06 - convert to use regmap API")
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/ZxL6rIlVlgsAu-Jv@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fix the following compilation warnings:
drivers/input/touchscreen/imagis.c:422:39: warning: ‘imagis_3038c_data’
defined but not used [-Wunused-const-variable=]
422 | static const struct imagis_properties imagis_3038c_data = {
drivers/input/touchscreen/imagis.c:415:39: warning: ‘imagis_3038b_data’
defined but not used [-Wunused-const-variable=]
415 | static const struct imagis_properties imagis_3038b_data = {
drivers/input/touchscreen/imagis.c:407:39: warning: ‘imagis_3038_data’
defined but not used [-Wunused-const-variable=]
407 | static const struct imagis_properties imagis_3038_data = {
drivers/input/touchscreen/imagis.c:398:39: warning: ‘imagis_3032c_data’
defined but not used [-Wunused-const-variable=]
398 | static const struct imagis_properties imagis_3032c_data = {
Only define the variables 'imagis_303*_data' when the CONFIG_OF
is enabled.
Fixes: 1e48ee99f6 ("Input: imagis - add supports for Imagis IST3038")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Acked-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20241023094831.1680214-1-zengheng4@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the '__free(device_node)' macro to automatically free the device
node, removing the need for explicit calls to 'of_node_put()' to
decrement its refcount.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-10-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the '__free(device_node)' macro to automatically free the device
node, removing the need for explicit calls to 'of_node_put()' to
decrement its refcount.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-9-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the '__free(device_node)' macro to simplify the code and error
handling. This makes the code more robust by ensuring that the device
node is always freed.
Drop the first assignment to 'pdev->dev.parent->of_node', as it was only
a shortcut, and tie 'np' to its usage as a child node.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241010-input_automate_of_node_put-v1-7-ebc62138fbf8@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a fix for Zinitix driver to not fail probing if property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support
for more hardware.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZxMk3gAKCRBAj56VGEWX
nHcXAP99ROP6m6hoGUEvCKVtWQuuKPxJTMByLpdpHdTcX15HdQD9GB9HBVnBdIV5
hckmsRPttRfhUIlMyWWR54anNidx4ww=
=yn7x
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for Zinitix driver to not fail probing if the property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support for
more hardware
* tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - don't fail if linux,keycodes prop is absent
Input: xpad - add support for MSI Claw A1M
Input: xpad - add support for 8BitDo Ultimate 2C Wireless Controller
When initially adding the touchkey support, a mistake was made in the
property parsing code. The possible negative errno from
device_property_count_u32() was never checked, which was an oversight
left from converting to it from the of_property as part of the review
fixes.
Re-add the correct handling of the absent property, in which case zero
touchkeys should be assumed, which would disable the feature.
Reported-by: Jakob Hauser <jahau@rocketmail.com>
Tested-by: Jakob Hauser <jahau@rocketmail.com>
Fixes: 075d9b22c8 ("Input: zinitix - add touchkey support")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Tested-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20241004-zinitix-no-keycodes-v2-1-876dc9fea4b6@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/input/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in a few drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241008090009.462836-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-10-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
This commit fixes several typographical errors in comments within
the driver/input directory. No functional changes are made.
Detected using codespell.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/20240926031457.3479350-1-yujiaoliang@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Extend the novatek touchscreen driver to support NT36672A chip which
is found in phones like qcom/sdm845-xiaomi-beryllium-tianma.dts.
Added devicetree support for the driver and used i2c chip data to handle
the variation in chip id and wake type. Also added vcc and iovcc
regulators which are used to power the touchscreen hardware.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-3-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is done in preparation to introduce other variants of the Novatek NVT
touchscreen controller that can be supported by the driver.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-1-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240920153430.503212-12-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver waits for the device to boot, which can be a lengthy
process. Switch it to asynchronous probing to allow more devices
to be probed simultaneously.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-19-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stop forcing interrupt to be low level triggered and instead rely on the
platform to define proper trigger to allow flexibility in board designs.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-17-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver does not actively manage regulator state past probe() time,
so we can use devm_regulator_get_enable() to simplify the code.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-16-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This regulator is not optional from the controller point of view,
so stop treating it as such. For hard-wired designs that omit the
regulator from their device trees regulator subsystem will create
a dummy instance.
This may introduce unnecessary delay of 100us in case of dummy
regulator, but if it is important the driver should be marked as
using asynchronous probing to avoid even longer delays waiting for
the command completions.
Also use usleep_range() instead of udelay() to avoid spinning.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-15-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use dev_err_probe() helper to log deferrals in the devices_deferred
debugfs file and avoid extra messages in the logs.
Also rename "ret" variables holding error codes only to "error".
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-13-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We should abort probe on any error besides -ENOENT which signifies that
the regulator is not defined in device tree or elsewhere, not only
when we see -EPROBE_DEFER.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-12-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Zforce touch data packet consists of a byte representing number of
contacts followed by several chunks with length of 9 bytes representing
each contact. Instead of accounting for the leading byte by increasing
offset of each field in contacts by one introduce a pointer to contact
data and point it appropriately. This avoids awkward constructs like:
point.prblty = payload[9 * i + 9];
which makes it seem like there is off-by-one error, in favor of more
straightforward:
point.prblty = p[8];
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-11-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of doing conversion from little-endian data to CPU endianness
by hand use existing helpers.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-10-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation allows for simpler code and ensures that mutexes are
automatically released in all code paths.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is a small chance that ts->suspending flag may change while the
interrupt handler is running. To make sure call to pm_relax() is not
skipped on accident use a temporary to hold the original value at the
beginning of interrupt. Use READ_ONCE() so that the value is actually
fetched at the right time.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is no need to have a lock around calls to i2c_master_send() and
i2c_master_recv() as they are not issued concurrently and they are not
sharing any buffers. Also there is no need for command_mutex as all
commands are issued sequentially.
Remove both.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input core and various helpers already do that for us, so drop the code
setting these bits explicitly.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no in-tree users of platform data and any new ones should
either use device tree or static device properties, so let's remove
platform data support.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
input_mt_report_slot_state() returns true if slot is active, so we can
combine checks for point.state != STATE_UP.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If devm_add_action() fails we are explicitly calling the cleanup to free
the resources allocated. Lets use the helper devm_add_action_or_reset()
and return directly in case of error, as we know that the cleanup
function has been already called by the helper if there was any error.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The different revisions of the Zinitix BTXXX touchscreens place
the icon status register (to read out touchkey status) in
different places. Use the chip revision bits to discern
between the different versions at runtime.
This makes touchkeys work on the BT404 on the Samsung Codina
GT-I8160 mobile phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240830-zinitix-tk-versions-v2-2-90eae6817eda@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The chip hardware revision, firmware version and regdata
revision is needed to discern because for example touchkeys
are handled by different registers on different versions of
the chip. Example output from BT404:
Zinitix-TS 3-0020: chip revision 4040 firmware version 0088
regdata version 0004
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240830-zinitix-tk-versions-v2-1-90eae6817eda@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZsjxKQAKCRBAj56VGEWX
nKE9APwPOZl4TldhPLG37LCvlVmgN0cSSWY+PEEqIaxmFtezjQEAr2/qs1XknZVr
LkuhmHxng2ZI9X4HUL+h52Lha7y4UAc=
=3Pcb
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes
* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: himax_hx83112b - fix incorrect size when reading product ID
Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
Input: uinput - reject requests with unreasonable number of slots
Input: edt-ft5x06 - add support for FocalTech FT8201
dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
Input: adc-joystick - fix optional value handling
Input: synaptics - enable SMBus for HP Elitebook 840 G2
Input: ads7846 - ratelimit the spi_sync error message
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210916153148.14045-1-caihuoqing@baidu.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The cyttsp4 touchscreen driver was contributed in 2013 and since then
has seen no updates. The driver uses platform data (no device tree
support) and there are no users of it in the mainline kernel. There were
occasional fixes to it for issues either found by static code analysis
tools or via visual inspection, but otherwise the driver is completely
untested.
Remove the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/ZrAZ2cUow_z838tp@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver does not try to power down the rails at system suspend or
when touchscreen is not in use, but rather enables regulators at probe
time. Power savings are achieved by requesting the controller to enter
low power mode.
Switch to devm_regulator_bulk_get_enable() instead of separately
requesting regulators, enabling them, and installing a custom
devm-action to disable them on unbind/remove, which simplifies the
code.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZrAgj9rG6oVqfdoK@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver does not use legacy GPIO API, stop including this header.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZrAaOu_vf-cVBhRn@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver does not use legacy GPIO API, stop including this header.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZrAaHWNvaAfDlDfI@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ensure that the touchscreen response has correct "report id" byte
before processing the touch data and discard other messages.
Fixes: 42370681bd ("Input: Add support for ILITEK Lego Series")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240805085511.43955-3-francesco@dolcini.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
For different reasons i2c transaction may fail or report id in the
message may be wrong. Avoid closing the frame in this case as it will
result in all contacts being dropped, indicating that nothing is
touching the screen anymore, while usually it is not the case.
Fixes: 42370681bd ("Input: Add support for ILITEK Lego Series")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240805085511.43955-2-francesco@dolcini.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of setting irq_set_irq_wake() directly in probe(), mark the device
as wakeup-capable, and use enable_irq_wake() and disable_irq_wake() in
suspend/resume path.
This also allows changing the wakeup setting dynamically at runtime using
/sys/devices/.../tsc2005/power/wakeup.
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240711172719.1248373-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When the driver has been converted to use gpiod API it was requesting
and asserting the reset on probe, but never deasserted it. However
because of incorrect annotations in device tree marking reset line as
active high whereas in reality it is active low, the end result was
that the chip was never reset on probe. With polarity of the reset line
now corrected this became a problem.
Fix this by calling tsc200x_reset() from tsc200x_probe() to properly
complete the reset sequence and move requesting the reset GPIO and VIO
supply closer to the point where we need to start talking to the
hardware.
Fixes: d257f2980f ("Input: tsc2005 - convert to gpiod")
Link: https://lore.kernel.org/r/20240711172719.1248373-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The chip needs to be powered up before calling tsc200x_stop_scan() which
communicates with it; move the call to enable the regulator earlier in
tsc200x_probe().
At the same time switch to using devm_regulator_get_enable() to simplify
error handling. This also makes sure that regulator is not shut off too
early when unbinding the driver.
Link: https://lore.kernel.org/r/20240711172719.1248373-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver supports the FT8201 chip as well. It registers up to 10 touch
points.
Tested on: Lenovo ThinkSmart View (CD-18781Y), LCM: BOE TV080WXM-LL4
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/r/20240804031310.331871-3-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We only had a couple of array[] declarations, and changing them to just
use 'MAX()' instead of 'max()' fixes the issue.
This will allow us to simplify our min/max macros enormously, since they
can now unconditionally use temporary variables to avoid using the
argument values multiple times.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case the touch controller is not connected, this message keeps scrolling
on the console indefinitelly. Ratelimit it to avoid filling kernel logs.
"
ads7846 spi2.1: spi_sync --> -22
"
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240708211913.171243-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- streamlined logic in input core for handling normal input handlers vs
input filters
- updates to input drivers to allocate memory with sizeof(*pointer)
instead of sizeof(type)
- change to ads7846 touchscreen driver to use hsync GPIO instead of
requiring platform data with special method (which is not compatible
with boards using device tree)
- update to adc-joystick driver to handle inverted axes
- cleanups in various drivers switching them to use the new "guard"
and "__free()" facilities
- changes to several drivers (adxl34x, atmel_mxt_ts, ati-remote2,
omap-keypad, yealink) to stop creating driver-specific device
attributes manually and use driver core facilities for this
- update to Cypress PS/2 protocol driver to properly handle errors
from the PS/2 transport as well as other cleanups
- update to edt-ft5x06 driver to support ft5426 variant
- update to ektf2127 driver to support ektf2232 variant
- update to exc3000 driver to support EXC81W32 variant
- update to imagis driver to support IST3038 variant
- other assorted driver cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZpWmqQAKCRBAj56VGEWX
nE00AQDsikkxIpF5GJo3mhHLHQc5noEB/zwwLNTqEmV/ThdffwD/bQmr0C0M1dhz
fOM9NqeyhwKkgGd389AIzv/dV7KIGwI=
=rQCl
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- streamlined logic in input core for handling normal input handlers vs
input filters
- updates to input drivers to allocate memory with sizeof(*pointer)
instead of sizeof(type)
- change to ads7846 touchscreen driver to use hsync GPIO instead of
requiring platform data with special method (which is not compatible
with boards using device tree)
- update to adc-joystick driver to handle inverted axes
- cleanups in various drivers switching them to use the new "guard" and
"__free()" facilities
- changes to several drivers (adxl34x, atmel_mxt_ts, ati-remote2,
omap-keypad, yealink) to stop creating driver-specific device
attributes manually and use driver core facilities for this
- update to Cypress PS/2 protocol driver to properly handle errors from
the PS/2 transport as well as other cleanups
- update to edt-ft5x06 driver to support ft5426 variant
- update to ektf2127 driver to support ektf2232 variant
- update to exc3000 driver to support EXC81W32 variant
- update to imagis driver to support IST3038 variant
- other assorted driver cleanups.
* tag 'input-for-v6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits)
Input: yealink - simplify locking in sysfs attribute handling
Input: yealink - use driver core to instantiate device attributes
Input: ati-remote2 - use driver core to instantiate device attributes
Input: omap-keypad - use driver core to instantiate device attributes
Input: atmel_mxt_ts - use driver core to instantiate device attributes
Input: exc3000 - add EXC81W32 support
dt-bindings: input: touchscreen: exc3000: add EXC81W32
Input: twl4030-pwrbutton - fix kernel-doc warning
Input: himax_hx83112b - add support for HX83100A
Input: himax_hx83112b - add himax_chip struct for multi-chip support
Input: himax_hx83112b - implement MCU register reading
Input: himax_hx83112b - use more descriptive register defines
dt-bindings: input: touchscreen: himax,hx83112b: add HX83100A
Input: do not check number of events in input_pass_values()
Input: preallocate memory to hold event values
Input: rearrange input_alloc_device() to prepare for preallocating of vals
Input: simplify event handling logic
Input: make events() method return number of events processed
Input: make sure input handlers define only one processing method
Input: evdev - remove ->event() method
...
Zinitix touch controllers can use some of the sense lines for virtual
keys (like those found on many phones). Add support for those keys.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240717-zinitix-tkey-v5-2-52ea4cd4bd50@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Export a sysfs interface that would allow reading and writing touchscreen
IC registers. With this interface many things can be done in usersapce
such as firmware updates. An example tool that utilizes this interface
for performing firmware updates can be found at [1].
[1] https://github.com/goodix/fwupdate_for_berlin_linux
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Link: https://lore.kernel.org/r/20240514115135.21410-1-charles.goodix@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
MCS-5000 belongs to the 1st generation of Melfas chips, manufactured in
2000-2007.
The driver relies on custom platform data (no DT support) and there
never were any users of this driver in the mainline kernel. The commit
adding the driver mentioned that the driver was tested on S3C6410 NCP
board (with Samsung S3C6410 SoC) but the touchscreen device was never
added to the board file. This board was removed in v6.3 in commit
743c8fbb90 ("ARM: s3c: remove most s3c64xx board support").
Remove the driver since there are no users.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240714060029.1528662-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of using a single table containing information about various
touchscreens and enums to match the driver ID table data with chip
information define individual per-protocol instances of
usbtouch_device_info structure and reference them directly from
the usbtouch_devices ID table. This is simpler, safer, and uses less
memory in case some protocols are disabled.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The data in this table is shared between all instances of the
touchscreens so it should not be modified.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation of splitting big usbtouch_dev_info table into separate
per-protocol structures and constifying them move process_pkt() from the
device info into main drvice structure and set it up in probe().
We can derive if we should use single- or multi-packet handling based
on presence of get_pkt_len() method.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Move the driver's ID table closer to where it is used in preparation
to it using pointers to device info/parameters instead of device type
enum.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of manually creating driver-specific device attributes
set struct usb_driver->dev_groups pointer to have the driver core
do it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmaUVJQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGzHQH/2lCvFWJt5sM5xrl
16blU2fyZ0JlKuCwtIXmk67bih9SWKo9MG2PINnt5CxPlJeErE/q89OtbyccoyZ8
KvN76ZKitUtQgETT+cQ5Qcq2N38siH3TKV4Pqvo7RZddjiJK1/I0gAfsQ+hv+Dr/
vbLSHwrOkSvyBSTBFW1FoATTa1qyhQpSvk9ePyq7d27vLJyVnbjWN5WF96I41/yh
oZS9gQIOKtK6zUae+DlIkeY0ViBuH5PK3KOjED81oo1I+dUwxJOeyYM/9Jvhgwk6
9ELQU69MiWtBcqj0NWNRKpTEAGXgWCrr8juChI2SSBnJuMdFKSflt4fSfTv2qJA3
KwYEgVY=
=KtAj
-----END PGP SIGNATURE-----
Merge tag 'v6.10' into next
Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.
Instead of manually creating driver-specific device attributes,
set struct driver->dev_groups pointer to have the driver core
do it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/Zo9kSFeGOZB9b3rq@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The HX83100A is a bit of an outlier in the Himax HX831xxx series of
touch controllers as it requires reading touch events through the AHB
interface of the MCU rather than providing a dedicated FIFO address like
the other chips do.
This patch implements the specific read function and introduces the
HX83100A chip with an appropriate i2c ID and DT compatible string.
The HX83100A doesn't have a straightforward way to do chip
identification, which is why it is not implemented in this patch.
Tested on: Lenovo ThinkSmart View (CD-18781Y) / Innolux P080DDD-AB2 LCM
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Tested-by: Paul Gale <paul@siliconpixel.com>
Link: https://lore.kernel.org/r/20240620145019.156187-6-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation for HX83100A support allow defining separate functions
for specific chip operations.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/r/20240620145019.156187-5-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Implement reading from the MCU in a more universal fashion. This allows
properly handling reads of more than 4 bytes using the AHB FIFO
implemented in the chip.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/r/20240620145019.156187-4-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Imagis IST3038 is another variant of Imagis IST3038 IC, which has
a different register interface from IST3038C (possibly firmware defined).
Unlike IST3038C/IST3032C, IST3038 has different registers for commands,
which means IST3038 doesn't use protocol B.
Similar to IST3032C and maybe the other variants, IST3038 has touch keys
support, which provides KEY_APPSELECT and KEY_BACK.
Add support for IST3038 with touch keys.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240613025631.5425-4-raymondhackley@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
protocol_b is a property, which tells Imagis panel to use a different
format for coordinates.
IST30XXC series is known for using protocol B, while the other series
aren't. Note this could be confusing, unlike the model name implies.
Adjust the usage of protocol_b to avoid confusion.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240613025631.5425-2-raymondhackley@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
