Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for reported
problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCalNPWw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yltzACdFC2/ouvc1ea1jGFBP1ZN4lKU6gAAn1ak5lRK
30pEMSmJwYteOj8AlpuE
=ZIWT
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Android/IIO fixes from Greg KH:
"Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for
reported problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues"
* tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
iio: event: Fix event FIFO reset race
iio: imu: inv_icm42600: fix timestamp clock period by using lower value
iio: light: al3010: fix incorrect scale for the highest gain range
iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for()
iio: light: tsl2591: return actual error from probe IRQ failure
iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading
iio: imu: st_lsm6dsx: deselect shub page before reading whoami
rust_binder: clear freeze listener on node removal
rust_binder: reject context manager self-transaction
rust_binder: use a u64 stride when cleaning up the offsets array
binder: fix UAF in binder_free_transaction()
binder: fix UAF in binder_thread_release()
rust_binder: synchronize Rust Binder stats with freeze commands
binder: cache secctx size before release zeroes it
rust_binder: fix BINDER_GET_EXTENDED_ERROR
iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig
iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig
iio: adc: ti-ads124s08: Return reset GPIO lookup errors
iio: temperature: Build mlx90635 with CONFIG_MLX90635
iio: light: al3320a: add missing REGMAP_I2C to Kconfig
...
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
mpl115_read_raw() takes a runtime PM reference with pm_runtime_get_sync()
before reading the processed pressure or raw temperature, but on the read
error path it returns without calling pm_runtime_put_autosuspend(). Each
failed read therefore leaks a runtime PM reference and prevents the device
from autosuspending.
Drop the reference before checking the return value so both the success
and error paths are balanced.
Fixes: 0c3a333524 ("iio: pressure: mpl115: Implementing low power mode by shutdown gpio")
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Assisted-by: Claude:claude-opus-4-8 coccinelle
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk4Gg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl89wCdG1WBLsvKHZ3zaFWd4POE8G/gS1YAnRf0GcRB
0F1/iBXSZLaRF/p9dsGq
=fg13
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
- new handy helper FIELD_GET_SIGNED() (Yury);
- arch test_and_set_bit_lock() and clear_bit_unlock() cleanup (Randy);
- __bf_shf() simplification (Yury);
- bitmap_print_to_pagebuf() removal (Yury);
- RISCV/bitrev conditional support (Jindie, Yury);
-----BEGIN PGP SIGNATURE-----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=z8f4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-for-7.2' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
"This includes the new FIELD_GET_SIGNED() helper,
bitmap_print_to_pagebuf() removal, RISCV/bitrev support, and a couple
cleanups.
- new handy helper FIELD_GET_SIGNED() (Yury)
- arch test_and_set_bit_lock() and clear_bit_unlock() cleanup (Randy)
- __bf_shf() simplification (Yury)
- bitmap_print_to_pagebuf() removal (Yury)
- RISCV/bitrev conditional support (Jindie, Yury)"
* tag 'bitmap-for-7.2' of https://github.com/norov/linux:
MAINTAINERS: BITOPS: include bitrev.[ch]
arch/riscv: Add bitrev.h file to support rev8 and brev8
bitops: Define generic___bitrev8/16/32 for reuse
lib/bitrev: Introduce GENERIC_BITREVERSE
arch: select HAVE_ARCH_BITREVERSE conditionally on BITREVERSE
bitmap: fix find helper documentation
bitmap: drop bitmap_print_to_pagebuf()
cpumask: switch cpumap_print_to_pagebuf() to using scnprintf()
bitfield: wire __bf_shf to __builtin_ctzll
bitops: use common function parameter names
ptp: switch to using FIELD_GET_SIGNED()
rtc: rv3032: switch to using FIELD_GET_SIGNED()
wifi: rtw89: switch to using FIELD_GET_SIGNED()
iio: mcp9600: switch to using FIELD_GET_SIGNED()
iio: pressure: bmp280: switch to using FIELD_GET_SIGNED()
iio: magnetometer: yas530: switch to using FIELD_GET_SIGNED()
iio: intel_dc_ti_adc: switch to using FIELD_GET_SIGNED()
x86/extable: switch to using FIELD_GET_SIGNED()
bitfield: add FIELD_GET_SIGNED()
Usual mixed bag of ancient issues and the recently introduced.
Various drivers
- Ensure use of simple_write_to_buffer() in debugfs callbacks doesn't
result in reading off the end of intended data by checking the
position is always 0.
buffer/hw-consumer
- Ensure scan_mask is freed on buffer release.
acpi-als
- Check ACPI_COMPANION() against NULL to close corner case where a
driver is overridden.
adi,ad4062
- Add GPIOLIB dependency to avoid undefined ref to gpiochip_get_data()
adi.ad7768-1
- Add GPIOLIB dependency to avoid several undefined functions.
adi,ad2s1210
- Ensure possible recovery path if a read fails in the interrupt handler.
bosch,bmg160
- Increase sleep on startup to ensure device is ready.
bosch,bmp280
- Ensure buffer pushed to kfifo is zeroed to avoid leaking uninitialized
stack data to userspace.
dyna-image,al3010
- Fix refactor that stopped reading one of the two measurement registers.
dyna-image,al3320a
- Fix refactor that stopped reading one of the two measurement registers.
qcom,spmi-iadc
- Ensure disable_irq_wake() is called on remove path.
sensiron,scd30
- Fix a sign extension bug.
st,vl5310x
- Ensure possible recovery path if a read fails in the interrupt handler.
ti,adc1298
- Bounds check for pga_settings index. Hardening against device returning
unexpected values.
ti,tmp006
- Ensure trigger correctly released on remove path.
vishay,veml6030
- Fix incorrect channel type in events.
vishay,veml6074
- Bounds check for veml6075_it_ms. Hardening against device returning
unexpected values.
-----BEGIN PGP SIGNATURE-----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=A+i2
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-7.1b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
IIO: 2nd set of fixes for the 7.1 cycle.
Usual mixed bag of ancient issues and the recently introduced.
Various drivers
- Ensure use of simple_write_to_buffer() in debugfs callbacks doesn't
result in reading off the end of intended data by checking the
position is always 0.
buffer/hw-consumer
- Ensure scan_mask is freed on buffer release.
acpi-als
- Check ACPI_COMPANION() against NULL to close corner case where a
driver is overridden.
adi,ad4062
- Add GPIOLIB dependency to avoid undefined ref to gpiochip_get_data()
adi.ad7768-1
- Add GPIOLIB dependency to avoid several undefined functions.
adi,ad2s1210
- Ensure possible recovery path if a read fails in the interrupt handler.
bosch,bmg160
- Increase sleep on startup to ensure device is ready.
bosch,bmp280
- Ensure buffer pushed to kfifo is zeroed to avoid leaking uninitialized
stack data to userspace.
dyna-image,al3010
- Fix refactor that stopped reading one of the two measurement registers.
dyna-image,al3320a
- Fix refactor that stopped reading one of the two measurement registers.
qcom,spmi-iadc
- Ensure disable_irq_wake() is called on remove path.
sensiron,scd30
- Fix a sign extension bug.
st,vl5310x
- Ensure possible recovery path if a read fails in the interrupt handler.
ti,adc1298
- Bounds check for pga_settings index. Hardening against device returning
unexpected values.
ti,tmp006
- Ensure trigger correctly released on remove path.
vishay,veml6030
- Fix incorrect channel type in events.
vishay,veml6074
- Bounds check for veml6075_it_ms. Hardening against device returning
unexpected values.
* tag 'iio-fixes-for-7.1b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (23 commits)
iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
iio: adc: ad_sigma_delta: fix CS held asserted and state leaks
iio: light: opt3001: fix missing state reset on timeout
iio: chemical: scd30: Cleanup initializations and fix sign-extension bug
iio: core: fix uninitialized data in debugfs
iio: backend: fix uninitialized data in debugfs
iio: dac: ad3552r-hs: fix uninitialized data ni ad3552r_hs_write_data_source()
iio: adc: qcom-spmi-iadc: balance enable_irq_wake() on driver unbind
iio: light: al3320a: read both ALS ADC registers again
iio: light: al3010: read both ALS ADC registers again
iio: temperature: tmp006: use devm_iio_trigger_register
iio: buffer: hw-consumer: free scan_mask on buffer release
iio: adc: ad7768-1: Select GPIOLIB
iio: light: veml6030: fix channel type when pushing events
iio: light: acpi-als: Check ACPI_COMPANION() against NULL
iio: resolver: ad2s1210: notify trigger and clear state on fault read error
iio: proximity: vl53l0x: notify trigger and clear IRQ on error paths
iio: gyro: bmg160: wait full startup time after mode change at probe
iio: gyro: bmg160: bail out when bandwidth/filter is not in table
iio: pressure: bmp280: zero-init bmp580 trigger handler buffer
...
Use IIO_CHAN_SOFT_TIMESTAMP() to define the timestamp channel instead of
manually filling in the struct iio_chan_spec fields. This makes the code
less verbose and mistake-prone.
Also drop obvious comment while we're at it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace the local press_adjust_channel_bit_mask() function with a
compound literal for scan_type initialization to improve code
readability.
Signed-off-by: Natália Salvino André <natalia.andre@ime.usp.br>
Co-developed-by: Pietro Di Consolo Gregorio <pietro.gregorio@usp.br>
Signed-off-by: Pietro Di Consolo Gregorio <pietro.gregorio@usp.br>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Siratul Islam <email@sirat.me>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Switch from sign_extend32(FIELD_GET()) to the dedicated
FIELD_GET_SIGNED() and don't calculate the fields length explicitly.
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
bmp580_trigger_handler() builds an on-stack scan buffer containing
two __le32 fields and an aligned_s64 timestamp, and pushes it to
userspace via iio_push_to_buffers_with_ts(). However, only the low
3 bytes of each __le32 field are populated by the device data:
memcpy(&buffer.comp_press, &data->buf[3], 3);
memcpy(&buffer.comp_temp, &data->buf[0], 3);
The high byte of each field is left uninitialised on the stack.
The bmp580 channels declare storagebits = 32, so the IIO core
transports all four bytes per sample to userspace as part of the
scan element, leaking two bytes of kernel stack per scan.
Zero-initialise the buffer before populating it, mirroring the fix
applied to bme280_trigger_handler() in commit 018f50909e ("iio:
bmp280: zero-init buffer").
Fixes: 872c8014e0 ("iio: pressure: bmp280: drop sensor_data array")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
bmp580_trigger_handler() declares its scan buffer on the stack without
an initializer and then memcpy()s 3 bytes of 24-bit sensor data into
each 4-byte __le32 field. The high byte of comp_temp and comp_press is
left uninitialized, and the channel storagebits is 32, so two bytes of
stack are pushed to userspace per scan.
This is a regression from when the buffer lived in the private data, the
move to a stack-local struct dropped the implicit zeroing.
bme280_trigger_handler() was fixed up to handle this bug, but this
driver was not fixed because there was no padding hole, but rather a
short-fill issue.
Fix this all by just zero-initializing the structure on the stack.
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: David Lechner <dlechner@baylibre.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Andy Shevchenko <andy@kernel.org>
Fixes: 872c8014e0 ("iio: pressure: bmp280: drop sensor_data array")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmnS4Y8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGe6AIAI4rjLLPlxUKQbx4
JP9lsKH7vqeIVvuMqzFau7+B8ngJ+80OESnBF7n43oNEqdJ0NYiL+rPtcGgBjZDP
yUu5DlzVSxpAIQBZe2Nc0dz/5NbT9QxKyC5Yl/whpNIR7UHx1RFvDJYxwN9xKxTw
ggLQevKAnHrKjIOKjq70Yqz2T1JMXc9Wp/xpur0oGioiFW/lH24CgHDXjE2Ka9oD
wqhotzThuSaaVDmqZ8WNFKxx2onR4r8/NpljaVT2mWRJ2+IMF4pMOBJZRQiNZtRa
1CsoJ3aV6pslAsuC1dLboCMul48VUgyu7l3xQwXVuA5bRO1jqt5ILWC10g09OItU
7CxGTno=
=1TRg
-----END PGP SIGNATURE-----
Merge tag 'v7.0-rc7' into char-misc-next
We need the char/misc/iio/comedi fixes in here as well for testing
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i2c_transfer() function returns the number of messages
successfully transferred. The function sends 1 message but checks
for ret == 2, which can never be true.
In practice this has no impact since the caller checks ret < 0,
and the erroneous return value of 1 is not treated as an error.
Improve the return value handling to properly distinguish between
I2C errors and unexpected transfer counts.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Tested-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since commit aef30c8d56 ("genirq: Warn about using IRQF_ONESHOT
without a threaded handler"), the IRQ core checks IRQF_ONESHOT flag
in IRQ request and gives a warning if there is no threaded handler.
Remove IRQF_ONESHOT from devm_request_irq().
Fixes: 47d323ce1e ("iio: pressure: add Honeywell ABP2 driver")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Tested-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.
The intention here was probably not allowing forced-threading for
handlers such as iio_trigger_generic_data_rdy_poll() will intends to
invoke hard-interrupt handlers.
Replace IRQF_ONESHOT with IRQF_NO_THREAD.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Do not print a duplicate error message if devm_request_irq() fails.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add copyright line to the core driver.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Implement a measurement sequence that does not involve a one byte read of
the status byte before reading the conversion.
The sensor's conversions should be read either once the EoC interrupt
has triggered or 5ms after the 0xaa command. See Options 1 and 2
respectively in Tables 16 (page 15) and 18 (page 18) of the datasheet.
Note that Honeywell's example code also covered in the datasheet follows
Option 2 for both i2c and SPI.
The datasheet does not specify any of the retry parameters that are
currently implemented in the driver. A simple 5+ms sleep as specified in
Option 2 is enough for a valid measurement sequence.
The change also gets rid of the code duplication tied to the verification
of the status byte.
This change only affects users that do not define the EoC interrupt in
the device tree.
Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf?download=false
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make sure a valid conversion comes with a status byte that only has
the MPR_ST_POWER bit set.
Return -EBUSY if also MPR_ST_BUSY is set or -EIO otherwise.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move memset() from the bus specific code into core.
Zeroing out the buffer is performed because the sensor has noticeable
latch-up sensitivity and in some cases it clamps the MISO signal to GND
in sync with SCLK [1]. A raw conversion of zero is out of bounds since
valid values have to be between output_min and output_max (and the
smallest output_min is 2.5% of 2^24 = 419430).
The user is expected to discard out of bounds pressure values.
Given the fact that we can't follow the behaviour of all SPI controllers
when faced to this clamping of an output signal, a raw conversion of zero
is used as an early warning in case the low level SPI API reacts
unexpectedly.
Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1588325/am3358-spi-tx-data-corruption [1]
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use a tx_buf that is part of the priv struct for transferring data to
the sensor instead of relying on a devm_kzalloc()-ed array.
Remove the .init operation in the process.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For the reason of better naming consistency rename priv->buffer into
priv->rx_buf since tx_buf will get introduced in the next patch.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove the iio_chan_spec and iio_dev structs which are already defined in
the included iio.h header.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A sign change is needed for proper calculation of the pressure.
This is a minor fix since it only affects users that might have custom
silicon from Honeywell that has honeywell,pmin-pascal != 0.
Also due to the fact that raw pressure values can not be lower
than output_min (400k-3.3M) there is no need to calculate a decimal for
the offset.
Fixes: 713337d914 ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the scan_type sign and realbits assignment.
The pressure is a 24bit unsigned int between output_min and output_max.
transfer function A: 10% to 90% of 2^24
transfer function B: 2.5% to 22.5% of 2^24
transfer function C: 20% to 80% of 2^24
[MPR_FUNCTION_A] = { .output_min = 1677722, .output_max = 15099494 }
[MPR_FUNCTION_B] = { .output_min = 419430, .output_max = 3774874 }
[MPR_FUNCTION_C] = { .output_min = 3355443, .output_max = 13421773 }
Fixes: 713337d914 ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Interrupt falling/rising flags should only be defined in the device tree.
Fixes: 713337d914 ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make sure that the spi_transfer struct is zeroed out before use.
Fixes: a0858f0cd2 ("iio: pressure: mprls0025pa add SPI driver")
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Do not print a duplicate error message if devm_request_irq() fails.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace "I2C" with "SPI" in the SPI module description.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Allow the user to select either the SPI or the i2c bus specific
module and autoselect core if needed.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adds driver for digital Honeywell ABP2 series of board mount
pressure and temperature sensors.
This driver covers 113 different pressure ranges and units on
both i2c and SPI buses.
The communication protocol involves sending two simple commands
to the sensor and there is no register access or a memory map.
For this reason the regmap API was not used.
The i2c address is hardcoded and depends on the part number.
Optional end of conversion interrupt control is present on the
i2c variants of the chips.
The EOC can also be defined for the SPI variants if a non-ABP2
but compatible chip is to be driven.
Tested on two sensors (ABP2MRRT001PDSA3 and ABP2DANT001BA2A3).
ocuments/sps-siot-abp2-series-datasheet-32350268-en.pdf
Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/basic-abp2-series/d
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions.
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now, with no reported
issues other than a merge conflict with your tree that should be trivial
to handle (take both sides).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTNDQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykVIACeN0AiTosAtp4CAGe4fAwM7EvbnkQAoNJE5NAx
Ef31/j1Tq2pCTWt6SVbs
=AY/e
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
Fix hp206c and st_pressure_* entries in pressure Makefiles to follow
alphabetical order as per guideline mentioned in iio/pressure/Makefile.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for pressure and temperature rising threshold events. For
both channels *_en and *_value (in raw units) attributes are exposed.
Since in write_event_config() the ctrl_reg1.active and ctrl_reg4
are modified, accessing the data->ctrl_reg{1,4} in set_trigger_state()
and write_event_config() needs to be now guarded by data->lock.
Otherwise, it would be possible that 2 concurrent threads executing
these functions would access the data->ctrl_reg{1,4} at the same time
and then one would overwrite the other's result.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The pressure measurement result is arranged as 20-bit unsigned value
residing in three 8-bit registers. Hence, it can be retrieved using
get_unaligned_be24() and by applying 4-bit shift.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add driver for Aosong adp810 differential pressure and temperature sensor.
This sensor provides an I2C interface for reading data.
Calculate CRC of the data received using standard crc8 library to verify
data integrity.
Tested on TI am62x sk board with sensor connected at i2c-2.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When the device is in ACTIVE mode the temperature and pressure measurements
are collected with a frequency determined by the ST[3:0] bits of CTRL_REG2
register.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
MPL3115 sensor features a "data ready" interrupt which indicates the
presence of new measurements.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rename the bitfield macros of CTRL_REG1, so that their names clearly
indicate their relation to CTRL_REG1.
This is a preparation for introducing the support for the DRDY interrupt
which requires the usage of other control registers.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Factor out the code responsible for collecting data for the triggered
buffer from the trigger handler into a separate function.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Correction of meas_time_us initialization based on an observation and
partial patch by David Lechner.
The constant part of the measurement time (as described in the
datasheet and implemented in the BM(P/E)2 Sensor API) was apparently
forgotten (it was already correctly applied for the BMP380) and is now
used.
There was also another thinko in bmp280_wait_conv:
data->oversampling_humid can actually have a value of 0 (for an
oversampling_ratio of 1), so it can not be used to detect the presence
of the humidity measurement capability. Use
data->chip_info->oversampling_humid_avail instead, which is NULL for
chips that cannot measure humidity and therefore must skip that part
of the calculation.
Closes: https://lore.kernel.org/linux-iio/875xgfg0wz.fsf@Gerda.invalid/
Fixes: 26ccfaa9dd ("iio: pressure: bmp280: Use sleep and forced mode for oneshot captures")
Suggested-by: David Lechner <dlechner@baylibre.com>
Tested-by: Achim Gratz <Achim.Gratz@Stromeko.DE>
Signed-off-by: Achim Gratz <Achim.Gratz@Stromeko.DE>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace `gpiod_set_value()` with `gpiod_set_value_cansleep()`, which is
required when the GPIO controller is connected via a slow bus such as
I2C. This is also safe to use in sleepable contexts like the driver
probe function.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove `dev_info()` call as it was considered noisy and is not
necessary for normal driver operation.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20250825135401.1765847-11-sakari.ailus@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
