The list operation to find and pop transaction entry appears several
times in transaction implementation, and can be replaced with a helper
functional macro.
Link: https://lore.kernel.org/r/20251101102131.925071-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Add missing kernel-doc parameter descriptions for five functions
in init_ohci1394_dma.c to fix documentation warnings when building
with W=1.
This patch addresses the following warnings:
- init_ohci1394_wait_for_busresets: missing @ohci description
- init_ohci1394_enable_physical_dma: missing @ohci description
- init_ohci1394_reset_and_init_dma: missing @ohci description
- init_ohci1394_controller: missing @num, @slot, @func descriptions
- setup_ohci1394_dma: missing @opt description
Tested with GCC 13.2.0 and W=1 flag. All documentation warnings
for these functions have been resolved.
Signed-off-by: Nirbhay Sharma <nirbhay.lkd@gmail.com>
Link: https://lore.kernel.org/r/20251024203219.101990-2-nirbhay.lkd@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
When returning from read_config_rom() function, the allocated buffer and
the previous buffer for configuration ROM should be released. The cleanup
function is useful in the case.
This commit uses the cleanup function to remove goto statements.
Link: https://lore.kernel.org/r/20251020115810.92839-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TASCAM FW-1884/FW-1804/FW-1082 is too lazy to repspond to asynchronous
request at S400. The asynchronous transaction often results in timeout.
This is a problematic quirk.
This commit adds support for the quirk. When identifying the new quirk
flag, then the transaction speed is configured at S200.
Link: https://lore.kernel.org/r/20251018035532.287124-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Current implementation determines the maximum transaction speed supported
by the target device after reading bus information block of configuration
ROM. The read operations for root directory block are then performed at
the determined speed. However, some devices have quirks that cause issues
when transactions are performed at the determined speed.
In the first place, all devices are required to support the lowest speed
(S100) and must respond successfully to any read request within the
configuration ROM space. Therefore it is safe to postpone speed
determination until the entire configuration ROM has been read.
This commit moves the speed determination after reading root directory.
Link: https://lore.kernel.org/r/20251018035532.287124-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
A commit 3a93d082ba ("ALSA: firewire-motu: add support for MOTU Audio
Express") describes a quirk of MOTU Audio Express. The device returns
acknowledge packet with 0x10 as the pending state of any types of
asynchronous request transaction. It is completely out of specification.
This commit implements handling for that device-specific quirk. The quirk
is detected after reading the root directory of configuration ROM. When
processing the acknowledge code in 1394 OHCI AT context event handler,
firewire-ohci module seeks the device instance of destination node by
traversing device hierarchy. If the device has the quirk, the acknowledge
code is replaced with the standard code.
The 1394 OHCI AT context events occur for outgoing asynchronous request
packets. The device traversal is safe since no new request initiators
exist after the fw_card_instance has been invalidated.
Link: https://lore.kernel.org/r/20251013140311.97159-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Every time the bus manager runs, the cached configuration ROM content of
the IRM device is investigated to detect device-specific quirks. This
detection can be performed in advance when reading the configuration ROM.
This commit adds device quirk flags to the fw_device structure, and
initializes them after reading the bus information block of the
configuration ROM. The quirk flags are immutable once the configuration
ROM has been read. Although they are likely accessed concurrently only by
the bus manager, this commit ensures safe access by preventing torn writes
and reads using the WRITE_ONCE()/READ_ONCE() macros.
Link: https://lore.kernel.org/r/20251013140311.97159-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This update includes the following changes:
- Removal of the deprecated debug parameter from firewire-ohci module
- Replacement of the module-local workqueue in 1394 OHCI PCI driver with
a companion IRQ thread
- Refactoring of bus management code
- Additional minor code cleanup
The existing tracepoints serve as an alternative to the removed debug
parameter. The use of IRQ thread is experimental, as it handles 1394 OHCI
SelfIDComplete event only. It may be replaced in the future releases with
another approach; e.g. by providing workqueue from core functionality
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCaNqKwQAKCRCsLtaWM8Lw
E8J0APwNtyOFP/r/ojGG8QezyDtxd67LPoU5ocLxEMsAUltE9QD+LMhtMkGXzz2r
Xfg54jwiEi52Y4eQ9r9UZhN78kmW8gw=
=tKD2
-----END PGP SIGNATURE-----
Merge tag 'firewire-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This update includes the following changes:
- Removal of the deprecated debug parameter from firewire-ohci module
- Replacement of the module-local workqueue in 1394 OHCI PCI driver
with a companion IRQ thread
- Refactoring of bus management code
- Additional minor code cleanup
The existing tracepoints serve as an alternative to the removed debug
parameter. The use of IRQ thread is experimental, as it handles 1394
OHCI SelfIDComplete event only. It may be replaced in the future
releases with another approach; e.g. by providing workqueue from core
functionality"
* tag 'firewire-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (43 commits)
firewire: core: fix undefined reference error in ARM EABI
Revert "firewire: core: disable bus management work temporarily during updating topology"
Revert "firewire: core: shrink critical section of fw_card spinlock in bm_work"
firewire: core: suppress overflow warning when computing jiffies from isochronous cycle
firewire: core: minor code refactoring to delete useless local variable
firewire: core; eliminate pick_me goto label
firewire: core: code refactoring to split contention procedure for bus manager
firewire: core: code refactoring for the case of generation mismatch
firewire: core: use switch statement to evaluate transaction result to CSR_BUS_MANAGER_ID
firewire: core: remove useless generation check
firewire: core: use struct_size and flex_array_size in ioctl_add_descriptor
firewire: core: shrink critical section of fw_card spinlock in bm_work
firewire: core: disable bus management work temporarily during updating topology
firewire: core: schedule bm_work item outside of spin lock
firewire: core: annotate fw_destroy_nodes with must-hold-lock
firewire: core: use spin lock specific to timer for split transaction
firewire: core: use spin lock specific to transaction
firewire: core: use spin lock specific to topology map
firewire: core: maintain phy packet receivers locally in cdev layer
firewire: core: use scoped_guard() to manage critical section to update topology
...
For ARM EABI, GCC generates a reference to __aeabi_uldivmod when compiling
a division of 64-bit integer with 32-bit integer. This function is not
available in Linux kernel. In such cases, helper macros are defined in
include/linux/math64.h.
This commit replaces the division with div_u64().
Fixes: 8ec6a8ec23 ("firewire: core: suppress overflow warning when computing jiffies from isochronous cycle")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509270428.FZaO2PPq-lkp@intel.com/
Link: https://lore.kernel.org/r/20250928011910.581475-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This reverts commit 582310376d.
The bus manager work has the race condition against fw_destroy_nodes()
called by fw_core_remove_card(). The acquition of spin lock of fw_card
is left as is again.
Link: https://lore.kernel.org/r/20250924131823.262136-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The multiplication by USEC_PER_SEC (=1000000L) may trigger an overflow
warning with 32 bit storage. In the case of the subsystem the input value
ranges between 800 and 16000, thus the result always fits within 32 bit
storage.
This commit suppresses the warning by using widening conversion to 64 bit
storage before multiplication, then using narrowing conversion to 32 bit
storage.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509170136.b5ZHaNAV-lkp@intel.com/
Fixes: 379b870c28 ("firewire: core: use helper macros instead of direct access to HZ")
Link: https://lore.kernel.org/r/20250924131140.261686-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In kernel v6.5, several functions were added to the cdev layer. This
required updating the default version of subsystem ABI up to 6, but
this requirement was overlooked.
This commit updates the version accordingly.
Fixes: 6add87e976 ("firewire: cdev: add new version of ABI to notify time stamp at request/response subaction of transaction#")
Link: https://lore.kernel.org/r/20250920025148.163402-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Current implementation stores the bus generation at which the bus manager
contending procedure finishes. The condition for the procedure is the
mismatch of the stored generation against current bus generation.
This commit refactors the code for the contending procedure. Two existing
branches are put into a new branch to detect the generation mismatch, thus
the most of change is indentation.
Link: https://lore.kernel.org/r/20250918235448.129705-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The result of the lock transaction to swap bus manager on isochronous
resource manager looks like an ad-hoc style. It is hard to read.
This commit uses switch statement to evaluate the result.
Link: https://lore.kernel.org/r/20250918235448.129705-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Two functions, fw_core_handle_bus_reset() and bm_work(), are serialized
by a commit 3d91fd440cc7 ("firewire: core: disable bus management work
temporarily during updating topology"). Therefore the generation member
of fw_card is immutable in bm_work().
This commit removes useless generation check in bm_work().
Link: https://lore.kernel.org/r/20250918235448.129705-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Use struct_size() to determine the memory needed for a new 'struct
descriptor_resource' and flex_array_size() to calculate the number of
bytes to copy from userspace. This removes the hardcoded size (4 bytes)
for the 'u32 data[]' entries.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250916122143.2459993-3-thorsten.blum@linux.dev
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Now fw_core_handle_bus_reset() and bm_work() are serialized. Some members
of fw_card are free to access in bm_work()
This commit shrinks critical section of fw_card spinlock in bm_work()
Link: https://lore.kernel.org/r/20250917000347.52369-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
When processing selfID sequence, bus topology tree is (re)built, and some
members of fw_card are determined. Once determined, the members are valid
during the bus generation. The above operations are in the critical
section of fw_card spin lock.
Before building the bus topology, a work item is scheduled for bus manager
work. The bm_work() function is invoked by the work item. The function
tries to acquire the spin lock, then can be stalled until the bus topology
building finishes.
The bus manager should work once the members of fw_card are determined.
This commit suppresses the above situation by disabling the work item
during processing selfID sequence.
Link: https://lore.kernel.org/r/20250917000347.52369-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Before (re)building topology tree, fw_core_handle_bus_reset() schedules
a work item under acquiring fw_card spin lock. The work item invokes
bm_work() which acquires the spin lock at first, then can be stalled to
wait until the building tree finishes. This is inconvenient.
This commit moves the timing to schedule the work item after releasing
the spin lock.
Link: https://lore.kernel.org/r/20250917000347.52369-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The function, fw_destroy_nodes(), is used widely within firewire-core
module. It has a prerequisite condition that struct fw_card.lock must
be hold in advance.
This commit adds annotation for it.
Link: https://lore.kernel.org/r/20250915234747.915922-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
At present the parameters to compute timeout time for split transaction is
protected by card-wide spin lock, while it is not necessarily convenient
in a point to narrower critical section.
This commit adds and uses another spin lock specific for the purpose.
Link: https://lore.kernel.org/r/20250915234747.915922-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The list of instance for asynchronous transaction to wait for response
subaction is maintained as a member of fw_card structure. The card-wide
spinlock is used at present for any operation over the list, however it
is not necessarily suited for the purpose.
This commit adds and uses the spin lock specific to maintain the list.
Link: https://lore.kernel.org/r/20250915234747.915922-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
At present, the operation for read transaction to topology map register is
not protected by any kind of lock primitives. This causes a potential
problem to result in the mixed content of topology map.
This commit adds and uses spin lock specific to topology map.
Link: https://lore.kernel.org/r/20250915234747.915922-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The list of receivers for phy packet is used only by cdev layer, while it
is maintained as a member of fw_card structure.
This commit maintains the list locally in cdev layer.
Link: https://lore.kernel.org/r/20250915234747.915922-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
At present, guard() macro is used for the critical section to update
topology. It is inconvenient to add the other critical sections into
the function.
This commit uses scoped_guard() macro instead.
Link: https://lore.kernel.org/r/20250915234747.915922-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The value of BUS_MANAGER_ID register has 0x3f when no node_id is
registered. Current implementation uses hard-coded numeric literal but
in the case the macro expression is preferable since it is easy to
distinguish the state from node ID mask.
This commit applies the idea.
Link: https://lore.kernel.org/r/20250913105737.778038-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The gap_count field is assigned to zero when mismatch is detected. In such
case, the macro expression is preferable since it is easy to understand
the situation.
This commit applies the idea.
Link: https://lore.kernel.org/r/20250913105737.778038-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The bm_work work item should be scheduled after holding fw_card reference
counting. At a commit 25feb1a96e ("firewire: core: use cleanup function
in bm_work"), I misinterpreted it as fw_card spinlock and inserted
lockdep_assert_hold() wrongly.
This commit removes the useless line.
Fixes: 25feb1a96e ("firewire: core: use cleanup function in bm_work")
Link: https://lore.kernel.org/r/20250911221312.678076-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The check of cycle master capability in root node is currently just in a
condition branch. In this case, the required variable should be within the
branch.
This commit is just for the purpose.
Link: https://lore.kernel.org/r/20250908012108.514698-12-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In the middle of bm_work function, both the value of gap_count and the
state of root node are investigated. Current implementation is not a good
shape since the investigation is aligned to be flat.
This commit refactors the investigation with two large branches.
Link: https://lore.kernel.org/r/20250908012108.514698-11-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The detection of IEEE 1394:1995 and Canon MV5i is just required within
some of the condition branches. In this case, these check can be
capsulated within these branches.
This commit refactors the checks.
Link: https://lore.kernel.org/r/20250908012108.514698-10-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The gap_count member of fw_card structure is referred when initiate bus
reset. This reference is done out of acquiring lock. This is not good.
This commit takes the reference within the acquiring lock, with
additional code refactoring.
Link: https://lore.kernel.org/r/20250908012108.514698-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The call of bm_work should be done after acquiring spin lock of fw_card.
For asynchronous transaction, the lock should be released temporarily
due to event waiting.
A commit 27310d5616 ("firewire: core: use guard macro to maintain
properties of fw_card") applied scoped_guard() to the bm_work function,
however it looks hard to follow to the control flow.
This commit refactors the spin lock acquisition after the transaction.
Link: https://lore.kernel.org/r/20250908012108.514698-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The function local variable, transaction_data, in bm_work function is
conditionally used. In the case, the branch-level variable is sometimes
useful.
This commit uses this idea.
Link: https://lore.kernel.org/r/20250908012108.514698-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In "bm_work" function, the references to fw_card and fw_node are
released at last. This is achieved by using goto statements. For this
case, the kernel cleanup framework is available.
This commit uses the framework to remove these statements.
Link: https://lore.kernel.org/r/20250908012108.514698-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The data mbmer in fw_node structure is an opaque pointer, while nowadays
it is just used to refer to fw_device associated with the fw_node.
This commit redefines the opaque pointer to a pointer to fw_device
structure, and adds some helper functions to set/get it.
Link: https://lore.kernel.org/r/20250908012108.514698-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The helper macro, retain_and_null_ptr(), introduced by a commit
092d00ead7 ("cleanup: Provide retain_and_null_ptr()") in v6.16 kernel,
is useful in the error path to release the part of structure member.
This commit uses the relatively new function.
Link: https://lore.kernel.org/r/20250908012108.514698-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
When allocating the list of isochronous context structure, a kzalloc()
variant of managed device API is used. In this case, a kcalloc() variant
is available.
This commit replaces these lines with devm_kcalloc().
Link: https://lore.kernel.org/r/20250908012108.514698-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The first step maintaining the bus topology is to handle SelfIDComplete
event. This event occurs after initiating bus reset when 1394 OHCI link
layer is enabled, or when the bus topology changes (e.g. when a device is
added). Because enumeration of the selfID sequence can take some time, it
should be processed in a bottom half.
Currently, this is done in a module-local workqueue with the
WQ_MEM_RECLAIM flag, to allow invocation during memory reclaim paths. A
threaded IRQ handler is a preferable alternative, as it eliminates the
need to manage workqueue attributes manually.
Although SelfIDComplete events are not so frequent in normal usage,
handling them correctly is critical for proper bus topology management.
This commit switches SelfIDComplete handling to a threaded IRQ handler.
Link: https://lore.kernel.org/r/20250823030954.268412-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The value of OHCI1394_SelfIDCount register includes an error-indicating
bit. It is safer to place the tracepoint probe after validating the
register value.
Link: https://lore.kernel.org/r/20250823030954.268412-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The module-level debug parameter was added in v2.6.26 by a commit
ad3c0fe8b8 ("firewire: debug interrupt events"). Its functionality
has long been superseded by tracepoints.
This commit removes the module parameter, bye.
Link: https://lore.kernel.org/r/20250821003017.186752-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Between v6.11 and v6.12, a set of tracepoints was added to record
asynchronous communication events:
- firewire:async_phy_inbound
- firewire:async_phy_outbound_initiate
- firewire:async_phy_outbound_complete
- firewire:async_response_inbound
- firewire:async_response_outbound_initiate
- firewire:async_response_outbound_complete
- firewire:async_request_inbound
- firewire:async_request_outbound_initiate
- firewire:async_request_outbound_complete
These tracepoints cover the functionality of the existing debug logging.
This commit removes the logging.
Link: https://lore.kernel.org/r/20250821003017.186752-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
A commit 677ceae190 ("firewire: core: add tracepoints event for
self_id_sequence") added the "firewire:self_id_sequence" event in v6.11.
A commit 526e21a2aa ("firewire: ohci: add tracepoints event for data
of Self-ID DMA") added the "firewire_ohci:self_id_complete" event in
v6.12.
These tracepoints replace the equivalent debug logging. This commit
removes the logging.
Link: https://lore.kernel.org/r/20250821003017.186752-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
A commit 0d8914165d ("firewire: ohci: add tracepoints event for hardIRQ
event") added "firewire_ohci:irqs" event in v6.11, which can provide
equivalent information to the existing debug logging.
This commit removes the logging.
Link: https://lore.kernel.org/r/20250821003017.186752-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The former commit has a limitation that only up to 4 FCP address
handlers could be processed per request. Although it suffices for most
use cases, it is technically a regression.
This commit lifts the restriction by reallocating the buffer from kernel
heap when more than 4 handlers are registered. The allocation is performed
within RCU read-side critical section, thus it uses GCP_ATOMIC flag. The
buffer size is rounded up to the next power of two to align with kmalloc
allocation units.
Link: https://lore.kernel.org/r/20250803122015.236493-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The former commit added reference counting to ensure safe invocations of
address handlers. Unlike the exclusive-region address handlers, all FCP
address handlers should be called on receiving an FCP request.
This commit uses the part of kernel stack to collect address handlers up
to 4 within the section, then invoke them outside of the section.
Reference counting ensures that each handler remains valid and safe to
call.
Lifting the limitation of supporting only 4 handlers is left for next
work.
Link: https://lore.kernel.org/r/20250803122015.236493-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The previous commit added reference counting to ensure safe invocations of
address handlers.
This commit moves the invocation of handlers for exclusive regions outside
of the RCU read-side critical section. The address handler for the
requested region is selected within the critical section, then invoked
outside of it.
Link: https://lore.kernel.org/r/20250803122015.236493-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The lifetime of address handler has been managed by linked list and RCU.
This approach was introduced in commit 35202f7d84 ("firewire: remove
global lock around address handlers, convert to RCU"). The invocations of
address handler are performed within RCU read-side critical sections.
In commit 57e6d9f85f ("firewire: ohci: use workqueue to handle events
of AR request/response contexts"), the invocations are in a workqueue
context. The approach still imposes limitation that sleeping is not
allowed within RCU read-side critical sections. However, since sleeping
is not permitted within RCU read-side critical sections, this approach
still has a limitation.
This commit adds reference counting to decouple handler invocation from
handler discovery. The linked list and RCU is used to discover the
handlers, while the reference counting is used to invoke them safely.
Link: https://lore.kernel.org/r/20250803122015.236493-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In commit 386a4153a2 ("firewire: ohci: cache the context run bit"), a
running member was added to the context structure to cache the running
state of a given DMA context. Although this member is accessible from IR,
IT, and AT contexts, it is currently used only by the AT context.
Additionally, the context structure includes a work item, which is also
used by the AT context. Both members are unnecessary for IR and IT
contexts.
This commit refactors the code by moving these two members into a new
structure specific to AT context.
Link: https://lore.kernel.org/r/20250710131916.31289-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This commit adds a work item to handle events of 1394 OHCI AT
request/response contexts, and queues the item to the specific
workqueue. The call of struct fw_packet.callbaqck() is done in the
workqueue when receiving acknowledgement to the asynchronous packet
transferred to remote node.
Link: https://lore.kernel.org/r/20250615133253.433057-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This commit adds a work item to handle events of 1394 OHCI AR
request/response contexts, and queues the item to the specific workqueue.
The call of struct fw_address_handler.address_callback() is done in the
workqueue when receiving any requests from the remove nodes. Additionally,
the call of struct fw_packet.callback() is done in the workqueue too when
receiving acknowledge to the asynchronous packet for the response
subaction of split transaction to the remote nodes.
Link: https://lore.kernel.org/r/20250615133253.433057-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Some tasklets (softIRQs) are still used as bottom-halves to handle
events for 1394 OHCI AR/AT contexts. However, using softIRQs for IRQ
bottom halves is generally discouraged today.
This commit adds a per-fw_card workqueue to accommodate the behaviour
specified by the 1394 OHCI specification.
According to the 1394 OHCI specification, system memory pages are
reserved for each asynchronous DMA context. This allows concurrent
operation across contexts. In the 1394 OHCI PCI driver implementation,
the hardware generates IRQs either upon receiving asynchronous packets
from other nodes (incoming) or after completing transmission to them
(outgoing). These independent events can occur in the same transmission
cycle, therefore the max_active parameter for the workqueue is set to the
total number of AR/AT contexts (=4). The WQ_UNBOUND flag is used to
allow the work to be scheduled on any available core, since there is
little CPU cache affinity benefit for the data.
Each DMA context uses a circular descriptor list in system memory,
allowing deferred data processing in software as long as buffer overrun
are avoided. Since the overall operation is sleepable except for small
atomic regions, WQ_BH is not used. As the descriptors contain
timestamps, WQ_HIGHPRI is specified to support semi-real-time
processing.
The asynchronous context is also used by the SCSI over IEEE 1394
protocol implementation (sbp2), which can be part of memory reclaim paths.
Therefore, WQ_MEM_RECLAIM is required.
To allow uses to adjust CPU affinity according to workload, WQ_SYSFS is
specified so that workqueue attributes are exposed to user space.
Link: https://lore.kernel.org/r/20250615133253.433057-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
A commit 60b2ebf485 ("workqueue: Introduce from_work() helper for cleaner
callback declarations") introduces a new macro to retrieve a poiner for the
parent structure of the work item. It is convenient to reduce input text.
This commit uses the macro in core functionalities.
Link: https://lore.kernel.org/r/20250608233808.202355-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
A commit 60b2ebf485 ("workqueue: Introduce from_work() helper for cleaner
callback declarations") introduces a new macro to retrieve a poiner for the
parent structure of the work item. It is convenient to reduce input text.
This commit uses the macro in PCI driver for 1394 OHCI.
Link: https://lore.kernel.org/r/20250608233808.202355-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The tasklet for bus reset event has been replaced with work item, while
some code comments still address to the tasklet.
This commit corrects them.
Fixes: 2d7a36e233 ("firewire: ohci: Move code from the bus reset tasklet into a workqueue")
Link: https://lore.kernel.org/r/20250608233808.202355-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
-----BEGIN PGP SIGNATURE-----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=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
It turns out that there are no platforms that have PCI but don't have an
MMU, so adding a Kconfig dependency on CONFIG_PCI simplifies build testing
kernels for those platforms a lot, and avoids a lot of inadvertent build
regressions.
Add a dependency for CONFIG_PCI and remove all the ones for PCI specific
device drivers that are currently marked not having it.
There are a few platforms that have an optional MMU, but they usually
cannot have PCI at all. The one exception is Coldfire MCF54xx, but this is
mainly for historic reasons, and anyone using those chips should really use
the MMU these days.
Link: https://lore.kernel.org/lkml/a41f1b20-a76c-43d8-8c36-f12744327a54@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20250423202215.3315550-1-arnd@kernel.org
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/firewire/core-cdev.c:1141:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/Z9NcB81yfPo-8o0h@kspp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
Updates to the usual drivers (ufs, lpfc, fnic, qla2xx, mpi3mr) The
major core change is the renaming of the slave_ methods plus a bit of
constification. The rest are minor updates and fixes.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ5ZQKSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMdAQCyVlDZ
v/3EFCuC4U1l70mMu8t+F4RPvqYxM3QPCi5dDQEA751YN/kaqxeXZDqGUKCAOE3K
Nl4XFTfLEkDVrQFFqPc=
=9sV8
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, fnic, qla2xx, mpi3mr).
The major core change is the renaming of the slave_ methods plus a bit
of constification. The rest are minor updates and fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (103 commits)
scsi: fnic: Propagate SCSI error code from fnic_scsi_drv_init()
scsi: fnic: Test for memory allocation failure and return error code
scsi: fnic: Return appropriate error code from failure of scsi drv init
scsi: fnic: Return appropriate error code for mem alloc failure
scsi: fnic: Remove always-true IS_FNIC_FCP_INITIATOR macro
scsi: fnic: Fix use of uninitialized value in debug message
scsi: fnic: Delete incorrect debugfs error handling
scsi: fnic: Remove unnecessary else to fix warning in FDLS FIP
scsi: fnic: Remove extern definition from .c files
scsi: fnic: Remove unnecessary else and unnecessary break in FDLS
scsi: mpi3mr: Fix possible crash when setting up bsg fails
scsi: ufs: bsg: Set bsg_queue to NULL after removal
scsi: ufs: bsg: Delete bsg_dev when setting up bsg fails
scsi: st: Don't set pos_unknown just after device recognition
scsi: aic7xxx: Fix build 'aicasm' warning
scsi: Revert "scsi: ufs: core: Probe for EXT_IID support"
scsi: storvsc: Ratelimit warning logs to prevent VM denial of service
scsi: scsi_debug: Constify sdebug_driver_template
scsi: documentation: Corrections for struct updates
scsi: driver-api: documentation: Change what is added to docbook
...
kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add a NULL check for test_state.
Fixes: 1c8506d626 ("firewire: test: add test of device attributes for simple AV/C device")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20250110084237.8877-1-hanchunchao@inspur.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Constify the following API:
struct device *device_find_child(struct device *dev, void *data,
int (*match)(struct device *dev, void *data));
To :
struct device *device_find_child(struct device *dev, const void *data,
device_match_t match);
typedef int (*device_match_t)(struct device *dev, const void *data);
with the following reasons:
- Protect caller's match data @*data which is for comparison and lookup
and the API does not actually need to modify @*data.
- Make the API's parameters (@match)() and @data have the same type as
all of other device finding APIs (bus|class|driver)_find_device().
- All kinds of existing device match functions can be directly taken
as the API's argument, they were exported by driver core.
Constify the API and adapt for various existing usages.
BTW, various subsystem changes are squashed into this commit to meet
'git bisect' requirement, and this commit has the minimal and simplest
changes to complement squashing shortcoming, and that may bring extra
code improvement.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for drivers/pwm
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20241224-const_dfc_done-v5-4-6623037414d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers using legacy PM have to manage PCI states and device's PM states
themselves. They also need to take care of configuration registers.
With improved and powerful support of generic PM, PCI Core takes care of
above mentioned, device-independent, jobs.
This driver makes use of PCI helper functions like
pci_save/restore_state(), pci_disable_device() and pci_set_power_state() to
do required operations. In generic mode, they are no longer needed.
Change function parameter in both .suspend() and .resume() to
"struct device*" type. Use to_pci_dev() to get "struct pci_dev*" variable.
Compile-tested only.
Maintainer has tested the changes on non-PowerPC platform and got no
failure of the suspend/resume operations.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200720150715.624520-1-vaibhavgupta40@gmail.com
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by; Takashi Sakamoto <o-takashi@sakamocchi.jp<
Improve naming consistency with the .sdev_prep() and .sdev_destroy()
methods by renaming .device_configure() into .sdev_configure().
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename .slave_alloc() into .sdev_init() and .slave_destroy() into
.sdev_destroy(). The new names make it clear that these are actions on
SCSI devices. Make this change in the SCSI core, SCSI drivers and also
in the ATA drivers. No functionality has been changed.
This patch has been created as follows:
* Change the text "slave_alloc" into "sdev_init" in all source files
except those in drivers/net/ and Documentation/.
* Change the text "slave_destroy" into "sdev_destroy" in all source
files except those in drivers/net/ and Documentation/.
* Rename lpfc_no_slave() into lpfc_no_sdev().
* Manually adjust whitespace where necessary to restore vertical
alignment (dc395x driver and include/linux/libata.h).
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A few updates for the 6.13 kernel, including some typo corrections in the
software stack and some fixes for tools. Additionally, it includes a
change resulting from the deprecation of a kernel API in the PCI
subsystem.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZ0F9HAAKCRCsLtaWM8Lw
E2JNAP9uUzbi5luZ3ATq/h3j8TXVv4lahuNDw7EOd8idrMBwQAEA6a5qynMaZcDY
4D/Ivde4PvkcKwGHOQolvEs23cdXBgo=
=dodB
-----END PGP SIGNATURE-----
Merge tag 'firewire-updates-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"A few updates for the 6.13 kernel, including some typo corrections in
the software stack and some fixes for tools. Additionally, it includes
a change resulting from the deprecation of a kernel API in the PCI
subsystem"
* tag 'firewire-updates-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
tools/firewire: Fix several incorrect format specifiers
firewire: ohci: Replace deprecated PCI functions
firewire: Correct some typos
pcim_iomap_regions() and pcim_iomap_table() have been deprecated in
commit e354bb84a4 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").
Replace these functions with pcim_iomap_region().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20241028094440.19115-3-pstanner@redhat.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In a commit 24b7f8e5cd ("firewire: core: use helper functions for self
ID sequence"), the enumeration over self ID sequence was refactored with
some helper functions with KUnit tests. These helper functions are
guaranteed to work expectedly by the KUnit tests, however their application
includes a mistake to assign invalid value to the index of port connected
to parent device.
This bug affects the case that any extra node devices which has three or
more ports are connected to 1394 OHCI controller. In the case, the path
to update the tree cache could hits WARN_ON(), and gets general protection
fault due to the access to invalid address computed by the invalid value.
This commit fixes the bug to assign correct port index.
Cc: stable@vger.kernel.org
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/lkml/8a9902a4ece9329af1e1e42f5fea76861f0bf0e8.camel@proton.me/
Fixes: 24b7f8e5cd ("firewire: core: use helper functions for self ID sequence")
Link: https://lore.kernel.org/r/20241025034137.99317-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Fixed some confusing typos that were currently identified with codespell,
the details are as follows:
drivers/firewire/core-topology.c:59: containted ==> contained
drivers/firewire/core.h:83: reenable ==> re-enable
drivers/firewire/ohci.c:1387: apppends ==> appends
drivers/firewire/ohci.c:2216: superceded ==> superseded
drivers/firewire/ohci.c:2617: litte ==> little
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://lore.kernel.org/r/20240930023344.7535-1-shenlichuan@vivo.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The flag of FW_ISO_CONTEXT_COMPLETIONS_CAUSE_IRQ directly causes hardIRQ
request by 1394 OHCI hardware when the corresponding isochronous packet is
transferred, however it is not so directly associated to hardIRQ
processing itself.
This commit renames the flag so that it relates to interrupt parameter of
internal packet data.
Link: https://lore.kernel.org/r/20240912133038.238786-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
There is a slight difference between fw_iso_context_flush_completions() and
fw_iso_context_schedule_flush_completions().
This commit updates the documentations for them.
Link: https://lore.kernel.org/r/20240912133038.238786-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Both IR/IT contexts use the same code to retire completed descriptors
as AT context uses.
This commit adds a helper function to reduce the duplicated codes.
Link: https://lore.kernel.org/r/20240912133038.238786-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This reverts commit 767bfb9ef27ebf760290d9f8bc303828b018c312. It appears
that the call of ohci_flush_iso_completions() in the work item scheduled
by hardIRQ of 1394 OHCI for any isochronous context changes the timing to
queue events in the view of user space application.
Link: https://lore.kernel.org/r/20240912133038.238786-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In current implementation, test_and_set_bit_lock() is used to mediate
concurrent calls of ohci_flush_iso_completions(). However, the ad-hoc
usage of atomic operations is not preferable.
This commit uses mutex_trylock() as the similar operations. The core
function is responsible for the mediation, instead of 1394 OHCI driver.
Link: https://lore.kernel.org/r/20240909140018.65289-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In current implementation, the work item for isochronous context executes
the same procedure of fw_iso_context_flush_completions() internally. There
is a space to refactor the implementation.
This commit calls fw_iso_context_flush_completions() in the work item. It
obsoletes fw_iso_context_init_work(). It also obsoletes a pair of
disable_work_sync() and enable_work() since the usage of
test_and_set_bit_lock() mediates concurrent call already.
Link: https://lore.kernel.org/r/20240909140018.65289-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The fw_iso_context_flush_completions() is the counterpart of
fw_iso_context_schedule_work() to process isochronous context in current
process context.
This commit fulfills its documentation.
Link: https://lore.kernel.org/r/20240908040549.75304-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In packet-per-buffer mode for isochronous context of 1394 OHCI, software
can schedule hardIRQ to the buffer in which the content of isochronous
packet is processed. The actual behaviour is different between isochronous
receive (IR) and transmit (IT) contexts in respect to isochronous cycle in
which the hardIRQ occurs.
In IR context, the hardIRQ occurs when the buffer is filled actually by
the content of received packet. If there are any isochronous cycles in
which the packet transmission is skipped, it is postponed to generate
the hardIRQ in respect to the isochronous cycle. In IT context, software
can schedule the content of packet every isochronous cycle including
skipping, therefore the hardIRQ occurs in the isochronous cycle to which
the software scheduled.
ALSA firewire stack uses the packet-per-buffer mode for both IR/IT
contexts. To process time stamp per packet (or per sample in some cases)
steadily for media clock recovery against unexpected transmission skips,
it uses an IT context to operate all of isochronous contexts by calls of
fw_iso_context_flush_completions() in the bottom-half of hardIRQ for the
IT context.
Although it looks well to handle all of isochronous contexts in a single
bottom-half context, it relatively takes longer time. In the future code
integration (not yet), it is possible to apply parallelism method to
process these context. In the case, it is useful to allow unit drivers to
schedule work items to process these isochronous contexts.
As a preparation, this commit exposes
fw_iso_context_schedule_flush_completions() as a kernel API available by
unit drivers. It is renamed from fw_iso_context_queue_work() since it is
a counter part of fw_iso_context_flush_completions().
Link: https://lore.kernel.org/r/20240908040549.75304-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In the former commits, the callback of isochronous context runs on work
process, thus no need to use atomic memory allocation.
This commit replaces GFP_ATOMIC with GCP_KERNEL in the callback for user
client.
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This commit queues work item for IT/IR events at hardIRQ handler to operate
the corresponding isochronous context. The work item is queued to any of
worker-pools.
The callback for either the implementation of unit protocol and user space
clients is executed in sleepable work process context. The change could
results in any errors of concurrent processing as well as sleep at atomic
context. These errors are fixed by the following commits.
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In the previous commit, the workqueue is added per the instance of fw_card
structure for isochronous contexts. The workqueue is designed to be used by
the implementation of fw_card_driver structure underlying the fw_card.
This commit adds some local APIs to be used by the implementation.
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This commit adds a workqueue dedicated for isochronous context processing.
The workqueue is allocated per instance of fw_card structure to satisfy the
following characteristics descending from 1394 OHCI specification:
In 1394 OHCI specification, memory pages are reserved to each isochronous
context dedicated to DMA transmission. It allows to operate these
per-context pages concurrently. Software can schedule hardware interrupt
for several isochronous context to the same cycle, thus WQ_UNBOUND is
specified. Additionally, it is sleepable to operate the content of pages,
thus WQ_BH is not used.
The isochronous context delivers the packets with time stamp, thus
WQ_HIGHPRI is specified for semi real-time data such as IEC 61883-1/6
protocol implemented by ALSA firewire stack. The isochronous context is not
used by the implementation of SCSI over IEEE1394 protocol (sbp2), thus
WQ_MEM_RECLAIM is not specified.
It is useful for users to adjust cpu affinity of the workqueue depending
on their work loads, thus WQ_SYS is specified to expose the attributes to
user space.
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
