mirror of
https://github.com/torvalds/linux.git
synced 2026-09-19 09:08:02 +02:00
185a4caeec
148 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
D Scott Phillips
|
8a570b19b4 |
KVM: arm64: vgic: Avoid double-deactivate of IRQs in the nested context
In the nested state, the physical interrupt has already been
deactivated through the HW bit in the LR. The extra deactivation
would be harmless but can hit an errata case on AmpereOne, so
avoid it here.
On AmpereOne, deactivating a physical interrupt through
ICC_DIR_EL1 or ICC_EOIR1_EL1 (depending on EOImode) which is not
active, but is the highest priority pending interrupt causes the
cpu to lose the interrupt pending state and also prevents the
delivery of future interrupts.
Fixes:
|
||
|
Jinjie Ruan
|
f9a82544c7 |
cpu/hotplug: Fix NULL kobject warning in cpuhp_smt_enable()
On arm64, when booting with `maxcpus` greater than the number of present
CPUs (e.g., QEMU -smp cpus=4,maxcpus=8), some CPUs are marked as 'present'
but have not yet been registered via register_cpu(). Consequently,
the per-cpu device objects for these CPUs are not yet initialized.
In cpuhp_smt_enable(), the code iterates over all present CPUs. Calling
_cpu_up() for these unregistered CPUs eventually leads to
sysfs_create_group() being called with a NULL kobject (or a kobject
without a directory), triggering the following warning in
fs/sysfs/group.c:
WARNING: fs/sysfs/group.c:137 at internal_create_group+0x41c/0x4bc, CPU#2: sh/181
[...]
Call trace:
internal_create_group+0x41c/0x4bc (P)
sysfs_create_group+0x18/0x24
topology_add_dev+0x1c/0x28
cpuhp_invoke_callback+0x104/0x20c
__cpuhp_invoke_callback_range+0x94/0x11c
_cpu_up+0x200/0x37c
When booting with ACPI, arm64 smp_prepare_cpus() currently sets all
enumerated CPUs as "present" regardless of their status in the MADT. This
causes issues with SMT hotplug control. For instance, with QEMU's
"-smp 4,maxcpus=8" configuration, the MADT GICC entries are populated as
follows:
1. The first four CPUs: `Enabled` set but `Online Capable` not set.
2. The remaining four CPUs: `Online Capable` set but `Enabled` not set
to support potential hot-plugging.
Fix this by:
1. When booting with ACPI, checking the ACPI_MADT_ENABLED flag in the GICC
entry before calling set_cpu_present() during SMP initialization.
2. Properly managing the present mask in acpi_map_cpu() and
acpi_unmap_cpu() to support actual CPU hotplug events, This aligns with
other architectures like x86 and LoongArch.
3. Update the arm64 CPU hotplug documentation to no longer state that all
online-capable vCPUs are marked as present by the kernel at boot time.
This ensures that only physically available or explicitly enabled CPUs
are in the present mask, keeping the SMT control logic consistent with
the actual hardware state.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: stable@vger.kernel.org
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#gic-cpu-interface-gicc-structure
Fixes:
|
||
|
Linus Torvalds
|
a87bbc4578 |
Things have calmed down a bit on the docs front, with no earthshaking
changes this time around:
- Ongoing work on the Japanese and Portuguese translations.
- Better integration of the MAINTAINERS file into the rendered documents,
including a search interface.
- A seemingly infinite supply of fixes for typos, minor grammatical issues,
and related problems that LLMs find with abandon.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmowdrAPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y2V0H+wYRT2JZkH2CVU1CTkFTYohjs3EEg/CFdRNR
JF2Nmc6akNYiWURcqC2wuQBDvJOB1NCkfPmX7QOuKlrA+kt41jlkSV6gqbK4M0Fc
8lJzJ1Qzs+Woe/tWzxE3+7YimZEoG7eWIUfeLiGCMwFviKUj5OxiS6dKwaq1D5Jt
QVFwb6BERuhDojFqrUH2P8AzJtaPqwGUwEivygwPunMT6yk/eWMj4ZJlkn7RZxP3
Zt1Sb42UX2noJe6kZ9cP1slTrMQVcSl8WAPQEpSRdcIpimY7RTjD0tZGnVLgyHRI
bAg/QEVHwqoM9wUC/KaFUVg/tXCVepcXmNRTDhFW4u3yIacE+1U=
=82gB
-----END PGP SIGNATURE-----
Merge tag 'docs-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation updates from Jonathan Corbet:
"Things have calmed down a bit on the docs front, with no earthshaking
changes this time around:
- Ongoing work on the Japanese and Portuguese translations
- Better integration of the MAINTAINERS file into the rendered
documents, including a search interface
- A seemingly infinite supply of fixes for typos, minor grammatical
issues, and related problems that LLMs find with abandon"
* tag 'docs-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (93 commits)
docs: pt_BR: Translate 3.Early-stage.rst into Portuguese
docs: pt_BR: update "Purpose of Defconfigs" section in maintainer-soc.rst
Documentation: bug-hunting.rst: fix grammar
docs/ja_JP: translate submitting-patches.rst (interleaved-replies)
docs: Fix minor grammatical error
docs/{it_it,sp_SP,zh_CN,zh_TW}: update references to removed CONFIG_DEBUG_SLAB
Documentation: process: fix brackets
Documentation: arch: fix brackets
docs/dyndbg: explain flags parse 1st
docs/dyndbg: update examples \012 to \n
docs: kernel-parameters: Fix stale sticore file paths
docs: real-time: Fix duplicated sched(7) text
docs: kgdb: Fix stale source file paths
docs: sonypi: Fix stale header file path
docs: kernel-parameters: Remove sa1100ir IrDA parameter
iommu: Documentation: rearrange, update kernel-parameters
docs: md: fix grammar in speed_limit description
docs: changes.rst: restore pahole 1.26 minimum (regressed by sort)
Documentation: Fix syntax of kmalloc_objs example in coding style doc
docs: pt_BR: update maintainer-handbooks
...
|
||
|
Will Deacon
|
0fccc93585 |
Merge branch 'for-next/errata' into for-next/core
* for-next/errata: arm64: errata: Mitigate TLBI errata on Microsoft Azure Cobalt 100 CPU arm64: errata: Mitigate TLBI errata on NVIDIA Olympus CPU arm64: errata: Mitigate TLBI errata on various Arm CPUs arm64: cputype: Add C1-Premium definitions arm64: cputype: Add C1-Ultra definitions arm64: kernel: Disable CNP on HiSilicon HIP09 arm64: cpufeature: Add WORKAROUND_DISABLE_CNP capability arm64: proton-pack: use sysfs_emit in sysfs show functions arm64: errata: Reformat table for IDs |
||
|
Manuel Ebner
|
b7851fa2c9 |
Documentation: arch: fix brackets
Add missing and remove needless parentheses, brackets and curly braces. Fix typos. Signed-off-by: Manuel Ebner <manuelebner@mailbox.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20260612095432.177759-2-manuelebner@mailbox.org> |
||
|
Will Deacon
|
1940e70a81 |
arm64: errata: Mitigate TLBI errata on Microsoft Azure Cobalt 100 CPU
Commit
|
||
|
Shanker Donthineni
|
ec7216f92e |
arm64: errata: Mitigate TLBI errata on NVIDIA Olympus CPU
NVIDIA Olympus cores are affected by the TLBI completion issue tracked as CVE-2025-10263. The existing ARM64_ERRATUM_4118414 handling already uses ARM64_WORKAROUND_REPEAT_TLBI to issue an additional broadcast TLBI;DSB sequence and ensure affected memory write effects are globally observed. Add MIDR_NVIDIA_OLYMPUS to the repeat-TLBI match list so the same mitigation is enabled on affected Olympus systems. Also document the NVIDIA Olympus erratum in the arm64 silicon errata table and list it in the Kconfig help text. Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Mark Rutland
|
cfd391e741 |
arm64: errata: Mitigate TLBI errata on various Arm CPUs
A number of CPUs developed by Arm suffer from errata whereby a broadcast TLBI;DSB sequence may complete before the global observation of writes which are translated by an affected TLB entry. These errata ONLY affect the completion of memory accesses which have been translated by an invalidated TLB entry, and these errata DO NOT affect the actual invalidation of TLB entries. TLB entries are removed correctly. This issue has been assigned CVE ID CVE-2025-10263. To mitigate this issue, Arm recommends that software follows any affected TLBI;DSB sequence with an additional TLBI;DSB, which will ensure that all memory write effects affected by the first TLBI have been globally observed. The additional TLBI can use any operation that is broadcast to affected CPUs, and the additional DSB can use any option that is sufficient to complete the additional TLBI. The ARM64_WORKAROUND_REPEAT_TLBI workaround is sufficient to mitigate the issue. Enable this workaround for affected CPUs, and update the silicon errata documentation accordingly. Note that due to the manner in which Arm develops IP and tracks errata, some CPUs share a common erratum number. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Mark Brown
|
f20f8fe086 |
arm64: Document SVE constraints on new hwcaps
Two of the SVE hwcaps added for the SVE features in the 2025 dpISA did
not explicitly call out their dependency on SVE in the ABI documentation.
Do so.
While we're here reorder the SVE and fature specific ID registers for
HWCAP3_SVE_LUT6 which did have the SVE dependency but listed it second
unlike the other SVE specific ID registers.
Fixes:
|
||
|
Zeng Heng
|
f64328ecf4 |
arm64: kernel: Disable CNP on HiSilicon HIP09
HiSilicon HIP09 implements TLB entry matching behavior that deviates from the ARM architecture specification when the CNP (Common not Private) bit is set in TTBRx_ELx. When TTBRx.CNP=1, TLB entries may be incorrectly shared between CPU cores, leading to TLB conflicts and stale mappings. This affects coherency and can result in incorrect translations. Add the hardware erratum workaround (Hisilicon erratum 162100125) to disable CNP on affected HIP09 cores. Co-developed-by: Tong Tiangen <tongtiangen@huawei.com> Signed-off-by: Tong Tiangen <tongtiangen@huawei.com> Signed-off-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Mark Brown
|
abca5e69ab |
arm64/cpufeature: Define hwcaps for 2025 dpISA features
The features added by the 2025 dpISA are all straightforward instruction only features so there is no state to manage, we can just expose hwcaps to let userspace know they are available. F16MM is slightly odd in that the feature is FEAT_F16MM but it is discovered via ID_AA64FPFR0_EL1.F16MM2. We follow the feature name. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Robin Murphy
|
ede94377d8 |
arm64: errata: Reformat table for IDs
We have some inconsistency where multiple errata for the same component share the same Kconfig workaround; some are one ID per line, some are smooshed together, and some are entirely separate entries. Standardise on the single entry, one ID per line format so that things render nice and consistently in the HTML docs, and it's simple and clear to add new IDs to existing workarounds without churning the table too much. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Linus Torvalds
|
13f24586a2 |
arm64 updates for 7.1 (second round):
Core features:
- Add workaround for C1-Pro erratum 4193714 - early CME (SME unit)
DVMSync acknowledgement. The fix consists of sending IPIs on TLB
maintenance to those CPUs running in user space with SME enabled
- Include kernel-hwcap.h in list of generated files (missed in a recent
commit generating the KERNEL_HWCAP_* macros)
CCA:
- Fix RSI_INCOMPLETE error check in arm-cca-guest
MPAM:
- Fix an unmount->remount problem with the CDP emulation, uninitialised
variable and checker warnings
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmnmQZcACgkQa9axLQDI
XvGouA//SXlo7hQyM41rkgRru9oqftrGg0y6nxz4Z089kv50cm3Jlf/nUuti6vah
BMBLCGXA1iOQrGIVmuvtCxDRrfYZWpfKGuT9A0gmEoMqrGIpWl9gfBQG+uR+YrQX
4kp5DLqB85WrJIPiy7HUV6GQoCbFuMrRJwxl89IdWZSobaei3SczTmnttwyJtxG5
/BMitl024TYdiOPNo8bhiML1wIJCaTHvH4IrtCHPyUHEAtsHSMy00y0OrSKBtA/9
ZHZRpY7Po/jnL7YUs1AfYwsaSXjkvqXN0K1Tdavzm75k6lpJmbM3VsZabG/CEuvK
PCOGV++is4Y/A+7aQsCwXKeVnY3b6AC4sextytNq0g3GZ7I+Ht9O6nbsp5ZmyXzB
HRiFxmFS1pSQOMX9f1neKi3vxDMTy1tKPeccTTzL8dNnxTvUBXnoWfPoJh3cpbjm
Dbhe1kksiEn01WWFacGtkIPDa9c+Bkd2T+8wrsk85Z+u3Z0JPM5PfOn6v3X9YlKl
K7W8fhvlDL1wP+iyWcMT5zdo+xzHY4ZxuyWbi9a4RhKc6lFHVVG2mpUuPwSsh2ma
NnxkDouriuoADHBir89U71N483HSnNfSjhlVSFYD2LFCre5KOZM4KYZ2vwWb8Sy4
79q+BlVRUTQ5O6XjePoSPjUW4APPNviHJsF4E4IiqHkd9O5lMZU=
=LNY2
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
"The main 'feature' is a workaround for C1-Pro erratum 4193714
requiring IPIs during TLB maintenance if a process is running in user
space with SME enabled.
The hardware acknowledges the DVMSync messages before completing
in-flight SME accesses, with security implications. The workaround
makes use of the mm_cpumask() to track the cores that need
interrupting (arm64 hasn't used this mask before).
The rest are fixes for MPAM, CCA and generated header that turned up
during the merging window or shortly before.
Summary:
Core features:
- Add workaround for C1-Pro erratum 4193714 - early CME (SME unit)
DVMSync acknowledgement. The fix consists of sending IPIs on TLB
maintenance to those CPUs running in user space with SME enabled
- Include kernel-hwcap.h in list of generated files (missed in a
recent commit generating the KERNEL_HWCAP_* macros)
CCA:
- Fix RSI_INCOMPLETE error check in arm-cca-guest
MPAM:
- Fix an unmount->remount problem with the CDP emulation,
uninitialised variable and checker warnings"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm_mpam: resctrl: Make resctrl_mon_ctx_waiters static
arm_mpam: resctrl: Fix the check for no monitor components found
arm_mpam: resctrl: Fix MBA CDP alloc_capable handling on unmount
virt: arm-cca-guest: fix error check for RSI_INCOMPLETE
arm64/hwcap: Include kernel-hwcap.h in list of generated files
arm64: errata: Work around early CME DVMSync acknowledgement
arm64: cputype: Add C1-Pro definitions
arm64: tlb: Pass the corresponding mm to __tlbi_sync_s1ish()
arm64: tlb: Introduce __tlbi_sync_s1ish_{kernel,batch}() for TLB maintenance
|
||
|
Catalin Marinas
|
858fbd7248 |
Merge branch 'for-next/c1-pro-erratum-4193714' into for-next/core
* for-next/c1-pro-erratum-4193714:
: Work around C1-Pro erratum 4193714 (CVE-2026-0995)
arm64: errata: Work around early CME DVMSync acknowledgement
arm64: cputype: Add C1-Pro definitions
arm64: tlb: Pass the corresponding mm to __tlbi_sync_s1ish()
arm64: tlb: Introduce __tlbi_sync_s1ish_{kernel,batch}() for TLB maintenance
|
||
|
Linus Torvalds
|
f1d26d72f0 |
IOMMU Updates for Linux v7.1:
Including:
- Core:
- Support for RISC-V IO-page-table format in generic iommupt
code
- ARM-SMMU Updates:
- Introduction of an "invalidation array" for SMMUv3, which enables
future scalability work and optimisations for devices with a large
number of SMMUv3 instances.
- Update the conditions under which the SMMUv3 driver works around
hardware errata for invalidation on MMU-700 implementations.
- Fix broken command filtering for the host view of NVIDIA's "cmdqv"
SMMUv3 extension.
- MMU-500 device-tree binding additions for Qualcomm Eliza & Hawi SoCs.
- Intel VT-d:
- Support for dirty tracking on domains attached to PASID
- Removal of unnecessary read*()/write*() wrappers
- Improvements to the invalidation paths
- AMD Vi:
- Race-condition fixed in debugfs code
- Make log buffer allocation NUMA aware
- RISC-V:
- IO-TLB flushing improvements
- Minor fixes
-----BEGIN PGP SIGNATURE-----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=T6YT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core:
- Support for RISC-V IO-page-table format in generic iommupt code
ARM-SMMU Updates:
- Introduction of an "invalidation array" for SMMUv3, which enables
future scalability work and optimisations for devices with a large
number of SMMUv3 instances
- Update the conditions under which the SMMUv3 driver works around
hardware errata for invalidation on MMU-700 implementations
- Fix broken command filtering for the host view of NVIDIA's "cmdqv"
SMMUv3 extension
- MMU-500 device-tree binding additions for Qualcomm Eliza & Hawi
SoCs
Intel VT-d:
- Support for dirty tracking on domains attached to PASID
- Removal of unnecessary read*()/write*() wrappers
- Improvements to the invalidation paths
AMD Vi:
- Race-condition fixed in debugfs code
- Make log buffer allocation NUMA aware
RISC-V:
- IO-TLB flushing improvements
- Minor fixes"
* tag 'iommu-updates-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (48 commits)
iommu/vt-d: Restore IOMMU_CAP_CACHE_COHERENCY
dt-bindings: arm-smmu: qcom: Add compatible for Hawi SoC
iommu/amd: Invalidate IRT cache for DMA aliases
iommu/riscv: Remove overflows on the invalidation path
iommu/amd: Fix clone_alias() to use the original device's devid
iommu/vt-d: Remove the remaining pages along the invalidation path
iommu/vt-d: Pass size_order to qi_desc_piotlb() not npages
iommu/vt-d: Split piotlb invalidation into range and all
iommu/vt-d: Remove dmar_writel() and dmar_writeq()
iommu/vt-d: Remove dmar_readl() and dmar_readq()
iommufd/selftest: Test dirty tracking on PASID
iommu/vt-d: Support dirty tracking on PASID
iommu/vt-d: Rename device_set_dirty_tracking() and pass dmar_domain pointer
iommu/vt-d: Block PASID attachment to nested domain with dirty tracking
iommu/dma: Always allow DMA-FQ when iommupt provides the iommu_domain
iommu/riscv: Fix signedness bug
iommu/amd: Fix illegal cap/mmio access in IOMMU debugfs
iommu/amd: Fix illegal device-id access in IOMMU debugfs
iommu/tegra241-cmdqv: Update uAPI to clarify HYP_OWN requirement
iommu/tegra241-cmdqv: Set supports_cmd op in tegra241_vcmdq_hw_init()
...
|
||
|
Catalin Marinas
|
0baba94a97 |
arm64: errata: Work around early CME DVMSync acknowledgement
C1-Pro acknowledges DVMSync messages before completing the SME/CME memory accesses. Work around this by issuing an IPI to the affected CPUs if they are running in EL0 with SME enabled. Note that we avoid the local DSB in the IPI handler as the kernel runs with SCTLR_EL1.IESB=1. This is sufficient to complete SME memory accesses at EL0 on taking an exception to EL1. On the return to user path, no barrier is necessary either. See the comment in sme_set_active() and the more detailed explanation in the link below. To avoid a potential IPI flood from malicious applications (e.g. madvise(MADV_PAGEOUT) in a tight loop), track where a process is active via mm_cpumask() and only interrupt those CPUs. Link: https://lore.kernel.org/r/ablEXwhfKyJW1i7l@J2N7QTR9R3 Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Ben Horgan
|
4ce0a2ccc0 |
arm64: mpam: Add initial MPAM documentation
MPAM (Memory Partitioning and Monitoring) is now exposed to user-space via resctrl. Add some documentation so the user knows what features to expect. Reviewed-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ben Horgan <ben.horgan@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Tested-by: Gavin Shan <gshan@redhat.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Tested-by: Jesse Chick <jessechick@os.amperecomputing.com> Signed-off-by: James Morse <james.morse@arm.com> |
||
|
James Morse
|
aeb8595a5f |
arm_mpam: Quirk CMN-650's CSU NRDY behaviour
CMN-650 is afflicted with an erratum where the CSU NRDY bit never clears. This tells us the monitor never finishes scanning the cache. The erratum document says to wait the maximum time, then ignore the field. Add a flag to indicate whether this is the final attempt to read the counter, and when this quirk is applied, ignore the NRDY field. This means accesses to this counter will always retry, even if the counter was previously programmed to the same values. The counter value is not expected to be stable, it drifts up and down with each allocation and eviction. The CSU register provides the value for a point in time. Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com> Tested-by: Gavin Shan <gshan@redhat.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Tested-by: Jesse Chick <jessechick@os.amperecomputing.com> Reviewed-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Co-developed-by: Ben Horgan <ben.horgan@arm.com> Signed-off-by: Ben Horgan <ben.horgan@arm.com> Signed-off-by: James Morse <james.morse@arm.com> |
||
|
Shanker Donthineni
|
dc48eb1ff2 |
arm_mpam: Add workaround for T241-MPAM-6
The registers MSMON_MBWU_L and MSMON_MBWU return the number of requests rather than the number of bytes transferred. Bandwidth resource monitoring is performed at the last level cache, where each request arrive in 64Byte granularity. The current implementation returns the number of transactions received at the last level cache but does not provide the value in bytes. Scaling by 64 gives an accurate byte count to match the MPAM specification for the MSMON_MBWU and MSMON_MBWU_L registers. This patch fixes the issue by reporting the actual number of bytes instead of the number of transactions from __ris_msmon_read(). Tested-by: Gavin Shan <gshan@redhat.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com> Tested-by: Peter Newman <peternewman@google.com> Tested-by: Jesse Chick <jessechick@os.amperecomputing.com> Reviewed-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Ben Horgan <ben.horgan@arm.com> Signed-off-by: James Morse <james.morse@arm.com> |
||
|
Shanker Donthineni
|
a7efe23ed6 |
arm_mpam: Add workaround for T241-MPAM-4
In the T241 implementation of memory-bandwidth partitioning, in the absence of contention for bandwidth, the minimum bandwidth setting can affect the amount of achieved bandwidth. Specifically, the achieved bandwidth in the absence of contention can settle to any value between the values of MPAMCFG_MBW_MIN and MPAMCFG_MBW_MAX. Also, if MPAMCFG_MBW_MIN is set zero (below 0.78125%), once a core enters a throttled state, it will never leave that state. The first issue is not a concern if the MPAM software allows to program MPAMCFG_MBW_MIN through the sysfs interface. This patch ensures program MBW_MIN=1 (0.78125%) whenever MPAMCFG_MBW_MIN=0 is programmed. In the scenario where the resctrl doesn't support the MBW_MIN interface via sysfs, to achieve bandwidth closer to MBW_MAX in the absence of contention, software should configure a relatively narrow gap between MBW_MIN and MBW_MAX. The recommendation is to use a 5% gap to mitigate the problem. Clear the feature MBW_MIN feature from the class to ensure we don't accidentally change behaviour when resctrl adds support for a MBW_MIN interface. Tested-by: Gavin Shan <gshan@redhat.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Tested-by: Jesse Chick <jessechick@os.amperecomputing.com> Reviewed-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Ben Horgan <ben.horgan@arm.com> Signed-off-by: James Morse <james.morse@arm.com> |
||
|
Shanker Donthineni
|
70e81fbedc |
arm_mpam: Add workaround for T241-MPAM-1
The MPAM bandwidth partitioning controls will not be correctly configured, and hardware will retain default configuration register values, meaning generally that bandwidth will remain unprovisioned. To address the issue, follow the below steps after updating the MBW_MIN and/or MBW_MAX registers. - Perform 64b reads from all 12 bridge MPAM shadow registers at offsets (0x360048 + slice*0x10000 + partid*8). These registers are read-only. - Continue iterating until all 12 shadow register values match in a loop. pr_warn_once if the values fail to match within the loop count 1000. - Perform 64b writes with the value 0x0 to the two spare registers at offsets 0x1b0000 and 0x1c0000. In the hardware, writes to the MPAMCFG_MBW_MAX MPAMCFG_MBW_MIN registers are transformed into broadcast writes to the 12 shadow registers. The final two writes to the spare registers cause a final rank of downstream micro-architectural MPAM registers to be updated from the shadow copies. The intervening loop to read the 12 shadow registers helps avoid a race condition where writes to the spare registers occur before all shadow registers have been updated. Tested-by: Gavin Shan <gshan@redhat.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com> Tested-by: Jesse Chick <jessechick@os.amperecomputing.com> Reviewed-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Ben Horgan <ben.horgan@arm.com> Signed-off-by: James Morse <james.morse@arm.com> |
||
|
Robin Murphy
|
3b79398383 |
iommu/arm-smmu-v3: Update Arm errata
MMU-700 r1p1 has subsequently fixed some of the errata for which we've been applying the workarounds unconditionally, so we can now make those conditional. However, there have also been some more new cases identified where we must rely on range invalidation commands, and thus still nominally avoid DVM being inadvertently enabled. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Linus Torvalds
|
72c395024d |
A slightly calmer cycle for docs this time around, though there is still a
fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for patch
submissions, and a separate document intended for consumption by
generative tools.
- The completion of the move of the documentation tools to tools/docs. For
now we're leaving a /scripts/kernel-doc symlink behind to avoid breaking
scripts.
- Ongoing build-system work includes the incorporation of documentation in
Python code, better support for documenting variables, and lots of
improvements and fixes.
- Automatic linking of man-page references -- cat(1), for example -- to
the online pages in the HTML build.
...and the usual array of typo fixes and such.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmmKM8YPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YLK4H/2gqVxY8wKbVymiB95/zudiba8EtWlKE4hZl
KAd4+csZ8RCTMxHJLI23FXOi56CYr3XOQol0DIDUGimQiQx/Cxa2QDWewpkqbNH1
tHPTaNWAj16wKzrZxXhWt+6FoBHd7wrqilLH180IRmezRhu+7kURQ5XEAAXfK08B
CfDXBsCpnGsKn+m72x04cpvnsf/iK3pznbKrZ0ZYGIoaZb6+BV3+jqVaLROWSQZt
Nvt1rYjsi0vaeNapbQL8q72UJ/+zO4nK9am13s7p20zD+jUVY48yfQB/ZqvHp/1L
aymcJUCq0h5sSOHnfSqY5MTZUR/0CK+npRcEPgDYzLBigc9XU9g=
=hHq1
-----END PGP SIGNATURE-----
Merge tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation updates from Jonathan Corbet:
"A slightly calmer cycle for docs this time around, though there is
still a fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for
patch submissions, and a separate document intended for consumption
by generative tools
- The completion of the move of the documentation tools to
tools/docs. For now we're leaving a /scripts/kernel-doc symlink
behind to avoid breaking scripts
- Ongoing build-system work includes the incorporation of
documentation in Python code, better support for documenting
variables, and lots of improvements and fixes
- Automatic linking of man-page references -- cat(1), for example --
to the online pages in the HTML build
...and the usual array of typo fixes and such"
* tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (107 commits)
doc: development-process: add notice on testing
tools: sphinx-build-wrapper: improve its help message
docs: sphinx-build-wrapper: allow -v override -q
docs: kdoc: Fix pdfdocs build for tools
docs: ja_JP: process: translate 'Obtain a current source tree'
docs: fix 're-use' -> 'reuse' in documentation
docs: ioctl-number: fix a typo in ioctl-number.rst
docs: filesystems: ensure proc pid substitutable is complete
docs: automarkup.py: Skip common English words as C identifiers
Documentation: use a source-read extension for the index link boilerplate
docs: parse_features: make documentation more consistent
docs: add parse_features module documentation
docs: jobserver: do some documentation improvements
docs: add jobserver module documentation
docs: kabi: helpers: add documentation for each "enum" value
docs: kabi: helpers: add helper for debug bits 7 and 8
docs: kabi: system_symbols: end docstring phrases with a dot
docs: python: abi_regex: do some improvements at documentation
docs: python: abi_parser: do some improvements at documentation
docs: add kabi modules documentation
...
|
||
|
Linus Torvalds
|
45bf4bc87c |
arm64 updates for 7.0
ACPI:
- Add interrupt signalling support to the AGDI handler.
- Add Catalin and myself to the arm64 ACPI MAINTAINERS entry.
CPU features:
- Drop Kconfig options for PAN and LSE (these are detected at runtime).
- Add support for 64-byte single-copy atomic instructions (LS64/LS64V).
- Reduce MTE overhead when executing in the kernel on Ampere CPUs.
- Ensure POR_EL0 value exposed via ptrace is up-to-date.
- Fix error handling on GCS allocation failure.
CPU frequency:
- Add CPU hotplug support to the FIE setup in the AMU driver.
Entry code:
- Minor optimisations and cleanups to the syscall entry path.
- Preparatory rework for moving to the generic syscall entry code.
Hardware errata:
- Work around Spectre-BHB on TSV110 processors.
- Work around broken CMO propagation on some systems with the SI-L1
interconnect.
Miscellaneous:
- Disable branch profiling for arch/arm64/ to avoid issues with noinstr.
- Minor fixes and cleanups (kexec + ubsan, WARN_ONCE() instead of
WARN_ON(), reduction of boolean expression).
- Fix custom __READ_ONCE() implementation for LTO builds when operating
on non-atomic types.
Perf and PMUs:
- Support for CMN-600AE.
- Be stricter about supported hardware in the CMN driver.
- Support for DSU-110 and DSU-120.
- Support for the cycles event in the DSU driver (alongside the
dedicated cycles counter).
- Use IRQF_NO_THREAD instead of IRQF_ONESHOT in the cxlpmu driver.
- Use !bitmap_empty() as a faster alternative to bitmap_weight().
- Fix SPE error handling when failing to resume profiling.
Selftests:
- Add support for the FORCE_TARGETS option to the arm64 kselftests.
- Avoid nolibc-specific my_syscall() function.
- Add basic test for the LS64 HWCAP.
- Extend fp-pidbench to cover additional workload patterns.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmmJ16QQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFO0CACxYy5klTAdqB+RjhxSbibZ6mmch/mX3zLl
qBp0HeKuwSv+EWEblmr6KMrr/S5YjtEMboOC7GnmEdSeM6hucu5gPiEb7bIDQfbB
5KJXoUlN1C+7Na4CimfordWiHIZw2d7mTumJcnsqMo7XN83t+4yqs98sET7WRCy5
WUyqHH/dGZsGcsBMrRRO3UriHCpU425GE0jopF5OkwCs4dwyUVIV8SmZtK4Ovi3u
Kin75UYgeVum8A218oHosTfYTBt4p/cSdfVVv5f3P14Q7lIstyJR7ZDqepTP2XSJ
95W3nuMfOT1lx7f6pqvHc+4Ccl/+DQnbW1PWwv8f3nXAKVVMafWf
=3SfC
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a little less than normal, probably due to LPC & Christmas/New
Year meaning that a few series weren't quite ready or reviewed in
time. It's still useful across the board, despite the only real
feature being support for the LS64 feature enabling 64-byte atomic
accesses to endpoints that support it.
ACPI:
- Add interrupt signalling support to the AGDI handler
- Add Catalin and myself to the arm64 ACPI MAINTAINERS entry
CPU features:
- Drop Kconfig options for PAN and LSE (these are detected at runtime)
- Add support for 64-byte single-copy atomic instructions (LS64/LS64V)
- Reduce MTE overhead when executing in the kernel on Ampere CPUs
- Ensure POR_EL0 value exposed via ptrace is up-to-date
- Fix error handling on GCS allocation failure
CPU frequency:
- Add CPU hotplug support to the FIE setup in the AMU driver
Entry code:
- Minor optimisations and cleanups to the syscall entry path
- Preparatory rework for moving to the generic syscall entry code
Hardware errata:
- Work around Spectre-BHB on TSV110 processors
- Work around broken CMO propagation on some systems with the SI-L1
interconnect
Miscellaneous:
- Disable branch profiling for arch/arm64/ to avoid issues with
noinstr
- Minor fixes and cleanups (kexec + ubsan, WARN_ONCE() instead of
WARN_ON(), reduction of boolean expression)
- Fix custom __READ_ONCE() implementation for LTO builds when
operating on non-atomic types
Perf and PMUs:
- Support for CMN-600AE
- Be stricter about supported hardware in the CMN driver
- Support for DSU-110 and DSU-120
- Support for the cycles event in the DSU driver (alongside the
dedicated cycles counter)
- Use IRQF_NO_THREAD instead of IRQF_ONESHOT in the cxlpmu driver
- Use !bitmap_empty() as a faster alternative to bitmap_weight()
- Fix SPE error handling when failing to resume profiling
Selftests:
- Add support for the FORCE_TARGETS option to the arm64 kselftests
- Avoid nolibc-specific my_syscall() function
- Add basic test for the LS64 HWCAP
- Extend fp-pidbench to cover additional workload patterns"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (43 commits)
perf/arm-cmn: Reject unsupported hardware configurations
perf: arm_spe: Properly set hw.state on failures
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
arm64: Fix non-atomic __READ_ONCE() with CONFIG_LTO=y
arm64: poe: fix stale POR_EL0 values for ptrace
kselftest/arm64: Raise default number of loops in fp-pidbench
kselftest/arm64: Add a no-SVE loop after SVE in fp-pidbench
perf/cxlpmu: Replace IRQF_ONESHOT with IRQF_NO_THREAD
arm64: mte: Set TCMA1 whenever MTE is present in the kernel
arm64/ptrace: Return early for ptrace_report_syscall_entry() error
arm64/ptrace: Split report_syscall()
arm64: Remove unused _TIF_WORK_MASK
kselftest/arm64: Add missing file in .gitignore
arm64: errata: Workaround for SI L1 downstream coherency issue
kselftest/arm64: Add HWCAP test for FEAT_LS64
arm64: Add support for FEAT_{LS64, LS64_V}
KVM: arm64: Enable FEAT_{LS64, LS64_V} in the supported guest
arm64: Provide basic EL2 setup for FEAT_{LS64, LS64_V} usage at EL0/1
KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory
KVM: arm64: Add documentation for KVM_EXIT_ARM_LDST64B
...
|
||
|
Frederic Weisbecker
|
79c0abaf06 |
sched/arm64: Move fallback task cpumask to HK_TYPE_DOMAIN
When none of the allowed CPUs of a task are online, it gets migrated to the fallback cpumask which is all the non nohz_full CPUs. However just like nohz_full CPUs, domain isolated CPUs don't want to be disturbed by tasks that have lost their CPU affinities. And since nohz_full rely on domain isolation to work correctly, the housekeeping mask of domain isolated CPUs should always be a subset of the housekeeping mask of nohz_full CPUs (there can be CPUs that are domain isolated but not nohz_full, OTOH there shouldn't be nohz_full CPUs that are not domain isolated): HK_TYPE_DOMAIN & HK_TYPE_KERNEL_NOISE == HK_TYPE_DOMAIN Therefore use HK_TYPE_DOMAIN as the appropriate fallback target for tasks. Note that cpuset isolated partitions are not supported on those systems and may result in undefined behaviour. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Waiman Long <longman@redhat.com> Acked-by: Will Deacon <will@kernel.org> Tested-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Crivellari <marco.crivellari@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: linux-arm-kernel@lists.infradead.org |
||
|
Rhys Tumelty
|
78a00cac1e |
docs: fix 're-use' -> 'reuse' in documentation
Signed-off-by: Rhys Tumelty <rhys@tumelty.co.uk> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20260128220233.179439-1-rhys@tumelty.co.uk> |
||
|
Will Deacon
|
2f8aed5e97 |
Merge branch 'for-next/errata' into for-next/core
* for-next/errata: arm64: errata: Workaround for SI L1 downstream coherency issue |
||
|
Jani Nikula
|
a592a36e49 |
Documentation: use a source-read extension for the index link boilerplate
The root document usually has a special :ref:`genindex` link to the generated index. This is also the case for Documentation/index.rst. The other index.rst files deeper in the directory hierarchy usually don't. For SPHINXDIRS builds, the root document isn't Documentation/index.rst, but some other index.rst in the hierarchy. Currently they have a ".. only::" block to add the index link when doing SPHINXDIRS html builds. This is obviously very tedious and repetitive. The link is also added to all index.rst files in the hierarchy for SPHINXDIRS builds, not just the root document. Put the boilerplate in a sphinx-includes/subproject-index.rst file, and include it at the end of the root document for subproject builds in an ad-hoc source-read extension defined in conf.py. For now, keep having the boilerplate in translations, because this approach currently doesn't cover translated index link headers. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> [jc: did s/doctree/kern_doc_dir/ ] Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20260123143149.2024303-1-jani.nikula@intel.com> |
||
|
Lucas Wei
|
3fed7e0059 |
arm64: errata: Workaround for SI L1 downstream coherency issue
When software issues a Cache Maintenance Operation (CMO) targeting a
dirty cache line, the CPU and DSU cluster may optimize the operation by
combining the CopyBack Write and CMO into a single combined CopyBack
Write plus CMO transaction presented to the interconnect (MCN).
For these combined transactions, the MCN splits the operation into two
separate transactions, one Write and one CMO, and then propagates the
write and optionally the CMO to the downstream memory system or external
Point of Serialization (PoS).
However, the MCN may return an early CompCMO response to the DSU cluster
before the corresponding Write and CMO transactions have completed at
the external PoS or downstream memory. As a result, stale data may be
observed by external observers that are directly connected to the
external PoS or downstream memory.
This erratum affects any system topology in which the following
conditions apply:
- The Point of Serialization (PoS) is located downstream of the
interconnect.
- A downstream observer accesses memory directly, bypassing the
interconnect.
Conditions:
This erratum occurs only when all of the following conditions are met:
1. Software executes a data cache maintenance operation, specifically,
a clean or clean&invalidate by virtual address (DC CVAC or DC
CIVAC), that hits on unique dirty data in the CPU or DSU cache.
This results in a combined CopyBack and CMO being issued to the
interconnect.
2. The interconnect splits the combined transaction into separate Write
and CMO transactions and returns an early completion response to the
CPU or DSU before the write has completed at the downstream memory
or PoS.
3. A downstream observer accesses the affected memory address after the
early completion response is issued but before the actual memory
write has completed. This allows the observer to read stale data
that has not yet been updated at the PoS or downstream memory.
The implementation of workaround put a second loop of CMOs at the same
virtual address whose operation meet erratum conditions to wait until
cache data be cleaned to PoC. This way of implementation mitigates
performance penalty compared to purely duplicate original CMO.
Signed-off-by: Lucas Wei <lucaswei@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
||
|
Yicong Yang
|
58ce78667a |
arm64: Add support for FEAT_{LS64, LS64_V}
Armv8.7 introduces single-copy atomic 64-byte loads and stores
instructions and its variants named under FEAT_{LS64, LS64_V}.
These features are identified by ID_AA64ISAR1_EL1.LS64 and the
use of such instructions in userspace (EL0) can be trapped.
As st64bv (FEAT_LS64_V) and st64bv0 (FEAT_LS64_ACCDATA) can not be tell
apart, FEAT_LS64 and FEAT_LS64_ACCDATA which will be supported in later
patch will be exported to userspace, FEAT_LS64_V will be enabled only
in kernel.
In order to support the use of corresponding instructions in userspace:
- Make ID_AA64ISAR1_EL1.LS64 visbile to userspace
- Add identifying and enabling in the cpufeature list
- Expose these support of these features to userspace through HWCAP3
and cpuinfo
ld64b/st64b (FEAT_LS64) and st64bv (FEAT_LS64_V) is intended for
special memory (device memory) so requires support by the CPU, system
and target memory location (device that support these instructions).
The HWCAP3_LS64, implies the support of CPU and system (since no
identification method from system, so SoC vendors should advertise
support in the CPU if system also support them).
Otherwise for ld64b/st64b the atomicity may not be guaranteed or a
DABT will be generated, so users (probably userspace driver developer)
should make sure the target memory (device) also have the support.
For st64bv 0xffffffffffffffff will be returned as status result for
unsupported memory so user should check it.
Document the restrictions along with HWCAP3_LS64.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
||
|
Catalin Marinas
|
17c05cb0ef |
Merge branches 'for-next/misc', 'for-next/kselftest', 'for-next/efi-preempt', 'for-next/assembler-macro', 'for-next/typos', 'for-next/sme-ptrace-disable', 'for-next/local-tlbi-page-reused', 'for-next/mpam', 'for-next/acpi' and 'for-next/documentation', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: perf: arm_spe: Add support for filtering on data source perf: Add perf_event_attr::config4 perf/imx_ddr: Add support for PMU in DB (system interconnects) perf/imx_ddr: Get and enable optional clks perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe() dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL arch_topology: Provide a stub topology_core_has_smt() for !CONFIG_GENERIC_ARCH_TOPOLOGY perf/arm-ni: Fix and optimise register offset calculation perf: arm_pmuv3: Add new Cortex and C1 CPU PMUs perf: arm_cspmu: fix error handling in arm_cspmu_impl_unregister() perf/arm-ni: Add NoC S3 support perf/arm_cspmu: nvidia: Add pmevfiltr2 support perf/arm_cspmu: nvidia: Add revision id matching perf/arm_cspmu: Add pmpidr support perf/arm_cspmu: Add callback to reset filter config perf: arm_pmuv3: Don't use PMCCNTR_EL0 on SMT cores * for-next/misc: : Miscellaneous patches arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT arm64: mm: use untagged address to calculate page index arm64: mm: make linear mapping permission update more robust for patial range arm64/mm: Elide TLB flush in certain pte protection transitions arm64/mm: Rename try_pgd_pgtable_alloc_init_mm arm64/mm: Allow __create_pgd_mapping() to propagate pgtable_alloc() errors arm64: add unlikely hint to MTE async fault check in el0_svc_common arm64: acpi: add newline to deferred APEI warning arm64: entry: Clean out some indirection arm64/mm: Ensure PGD_SIZE is aligned to 64 bytes when PA_BITS = 52 arm64/mm: Drop cpu_set_[default|idmap]_tcr_t0sz() arm64: remove unused ARCH_PFN_OFFSET arm64: use SOFTIRQ_ON_OWN_STACK for enabling softirq stack arm64: Remove assertion on CONFIG_VMAP_STACK * for-next/kselftest: : arm64 kselftest patches kselftest/arm64: Align zt-test register dumps * for-next/efi-preempt: : arm64: Make EFI calls preemptible arm64/efi: Call EFI runtime services without disabling preemption arm64/efi: Move uaccess en/disable out of efi_set_pgd() arm64/efi: Drop efi_rt_lock spinlock from EFI arch wrapper arm64/fpsimd: Permit kernel mode NEON with IRQs off arm64/fpsimd: Don't warn when EFI execution context is preemptible efi/runtime-wrappers: Keep track of the efi_runtime_lock owner efi: Add missing static initializer for efi_mm::cpus_allowed_lock * for-next/assembler-macro: : arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in headers arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers * for-next/typos: : Random typo/spelling fixes arm64: Fix double word in comments arm64: Fix typos and spelling errors in comments * for-next/sme-ptrace-disable: : Support disabling streaming mode via ptrace on SME only systems kselftest/arm64: Cover disabling streaming mode without SVE in fp-ptrace kselftst/arm64: Test NT_ARM_SVE FPSIMD format writes on non-SVE systems arm64/sme: Support disabling streaming mode via ptrace on SME only systems * for-next/local-tlbi-page-reused: : arm64, mm: avoid TLBI broadcast if page reused in write fault arm64, tlbflush: don't TLBI broadcast if page reused in write fault mm: add spurious fault fixing support for huge pmd * for-next/mpam: (34 commits) : Basic Arm MPAM driver (more to follow) MAINTAINERS: new entry for MPAM Driver arm_mpam: Add kunit tests for props_mismatch() arm_mpam: Add kunit test for bitmap reset arm_mpam: Add helper to reset saved mbwu state arm_mpam: Use long MBWU counters if supported arm_mpam: Probe for long/lwd mbwu counters arm_mpam: Consider overflow in bandwidth counter state arm_mpam: Track bandwidth counter state for power management arm_mpam: Add mpam_msmon_read() to read monitor value arm_mpam: Add helpers to allocate monitors arm_mpam: Probe and reset the rest of the features arm_mpam: Allow configuration to be applied and restored during cpu online arm_mpam: Use a static key to indicate when mpam is enabled arm_mpam: Register and enable IRQs arm_mpam: Extend reset logic to allow devices to be reset any time arm_mpam: Add a helper to touch an MSC from any CPU arm_mpam: Reset MSC controls from cpuhp callbacks arm_mpam: Merge supported features during mpam_enable() into mpam_class arm_mpam: Probe the hardware features resctrl supports arm_mpam: Add helpers for managing the locking around the mon_sel registers ... * for-next/acpi: : arm64 acpi updates ACPI: GTDT: Get rid of acpi_arch_timer_mem_init() * for-next/documentation: : arm64 Documentation updates Documentation/arm64: Fix the typo of register names |
||
|
Zenon Xiu
|
4b7a59fa70 |
Documentation/arm64: Fix the typo of register names
The register name 'HWFGWTR_EL2' and 'HWFGRTR_EL2' is wrong, should be 'HFGWTR_EL2' and 'HFGRTR_EL2'. Find the register description on arm website here, https://developer.arm.com/documentation/ddi0601/2025-09/AArch64-Registers/HFGWTR-EL2--Hypervisor-Fine-Grained-Write-Trap-Register https://developer.arm.com/documentation/ddi0601/2025-09/AArch64-Registers/HFGRTR-EL2--Hypervisor-Fine-Grained-Read-Trap-Register?lang=en Signed-off-by: Zenon Xiu <zenonxiu@outlook.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
472800cd5e |
arm64/sme: Support disabling streaming mode via ptrace on SME only systems
Currently it is not possible to disable streaming mode via ptrace on SME only systems, the interface for doing this is to write via NT_ARM_SVE but such writes will be rejected on a system without SVE support. Enable this functionality by allowing userspace to write SVE_PT_REGS_FPSIMD format data via NT_ARM_SVE with the vector length set to 0 on SME only systems. Such writes currently error since we require that a vector length is specified which should minimise the risk that existing software is relying on current behaviour. Reads are not supported since I am not aware of any use case for this and there is some risk that an existing userspace application may be confused if it reads NT_ARM_SVE on a system without SVE. Existing kernels will return FPSIMD formatted register state from NT_ARM_SVE if full SVE state is not stored, for example if the task has not used SVE. Returning a vector length of 0 would create a risk that software would try to do things like allocate space for register state with zero sizes, while returning a vector length of 128 bits would look like SVE is supported. It seems safer to just not make the changes to add read support. It remains possible for userspace to detect a SME only system via the ptrace interface only since reads of NT_ARM_SSVE and NT_ARM_ZA will succeed while reads of NT_ARM_SVE will fail. Read/write access to the FPSIMD registers in non-streaming mode is available via REGSET_FPR. sve_set_common() already avoids allocating SVE storage when doing a FPSIMD formatted write and allocating SME storage when doing a NT_ARM_SVE write so we change the function to validate the new case and skip setting a vector length for it. The aim is to make a minimally invasive change, no operation that would previously have succeeded will be affected, and we use a previously defined interface in new circumstances rather than define completely new ABI. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: David Spickett <david.spickett@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Will Deacon
|
f2d64a22fa |
Merge branch 'for-next/perf' into for-next/core
* for-next/perf: (29 commits) perf/dwc_pcie: Fix use of uninitialized variable Documentation: hisi-pmu: Add introduction to HiSilicon V3 PMU Documentation: hisi-pmu: Fix of minor format error drivers/perf: hisi: Add support for L3C PMU v3 drivers/perf: hisi: Refactor the event configuration of L3C PMU drivers/perf: hisi: Extend the field of tt_core drivers/perf: hisi: Extract the event filter check of L3C PMU drivers/perf: hisi: Simplify the probe process of each L3C PMU version drivers/perf: hisi: Export hisi_uncore_pmu_isr() drivers/perf: hisi: Relax the event ID check in the framework perf: Fujitsu: Add the Uncore PMU driver perf/arm-cmn: Fix CMN S3 DTM offset perf: arm_spe: Prevent overflow in PERF_IDX2OFF() coresight: trbe: Prevent overflow in PERF_IDX2OFF() MAINTAINERS: Remove myself from HiSilicon PMU maintainers drivers/perf: hisi: Add support for HiSilicon MN PMU driver drivers/perf: hisi: Add support for HiSilicon NoC PMU perf: arm_pmuv3: Factor out PMCCNTR_EL0 use conditions arm64/boot: Enable EL2 requirements for SPE_FEAT_FDS arm64/boot: Factor out a macro to check SPE version ... |
||
|
Will Deacon
|
e0669b95f7 |
Merge branch 'for-next/docs' into for-next/core
* for-next/docs: arm64/sme: Drop inaccurate documentation of streaming mode switches |
||
|
Mark Rutland
|
0c33aa1804 |
arm64: errata: Apply workarounds for Neoverse-V3AE
Neoverse-V3AE is also affected by erratum #3312417, as described in its Software Developer Errata Notice (SDEN) document: Neoverse V3AE (MP172) SDEN v9.0, erratum 3312417 https://developer.arm.com/documentation/SDEN-2615521/9-0/ Enable the workaround for Neoverse-V3AE, and document this. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
James Clark
|
00d7a1af5a |
arm64/boot: Enable EL2 requirements for SPE_FEAT_FDS
SPE data source filtering (optional from Armv8.8) requires that traps to the filter register PMSDSFR be disabled. Document the requirements and disable the traps if the feature is present. Tested-by: Leo Yan <leo.yan@arm.com> Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Mark Brown
|
220928e52c |
arm64/hwcap: Add hwcap for FEAT_LSFE
FEAT_LSFE (Large System Float Extension), providing atomic floating point memory operations, is optional from v9.5. This feature adds no new architectural stare and we have no immediate use for it in the kernel so simply provide a hwcap for it to support discovery by userspace. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Mark Brown
|
3c0979c644 |
arm64/sme: Drop inaccurate documentation of streaming mode switches
The SME ABI documentation contains an inaccurate description of the architectural streaming mode entry/exit behaviour, just remove it since this is better documented by the architecture or with the rest of the documentation for the specific software interfaces concerned. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Linus Torvalds
|
63eb28bb14 |
ARM:
- Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts. - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface. - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally. - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range. - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor. - Convert more system register sanitization to the config-driven implementation. - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls. - Various cleanups and minor fixes. LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups. RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time. - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors. - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n). - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical. - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps. - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently. - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed. - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo. - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone. - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list). - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC. - Various cleanups and fixes. x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests. - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF. x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still). - Fix a variety of flaws and bugs in the AVIC device posted IRQ code. - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation. - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry. - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs. - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU. - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model. - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care. - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance. - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data. Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI. - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand. - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs. - Clean up and document/comment the irqfd assignment code. - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique. - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions. - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL. - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely. - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation. Selftests: - Fix a comment typo. - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing). - Skip tests that hit EACCES when attempting to access a file, and rpint a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmiKXMgUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhMQf/QDhC/CP1aGXph2whuyeD2NMqPKiU 9KdnDNST+ftPwjg9QxZ9mTaa8zeVz/wly6XlxD9OQHy+opM1wcys3k0GZAFFEEQm YrThgURdzEZ3nwJZgb+m0t4wjJQtpiFIBwAf7qq6z1VrqQBEmHXJ/8QxGuqO+BNC j5q/X+q6KZwehKI6lgFBrrOKWFaxqhnRAYfW6rGBxRXxzTJuna37fvDpodQnNceN zOiq+avfriUMArTXTqOteJNKU0229HjiPSnjILLnFQ+B3akBlwNG0jk7TMaAKR6q IZWG1EIS9q1BAkGXaw6DE1y6d/YwtXCR5qgAIkiGwaPt5yj9Oj6kRN2Ytw== =j2At -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "ARM: - Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor - Convert more system register sanitization to the config-driven implementation - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls - Various cleanups and minor fixes LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n) - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list) - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC - Various cleanups and fixes x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still) - Fix a variety of flaws and bugs in the AVIC device posted IRQ code - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs - Clean up and document/comment the irqfd assignment code - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation Selftests: - Fix a comment typo - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing) - Skip tests that hit EACCES when attempting to access a file, and print a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits) Documentation: KVM: Use unordered list for pre-init VGIC registers RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map() RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs RISC-V: perf/kvm: Add reporting of interrupt events RISC-V: KVM: Enable ring-based dirty memory tracking RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap RISC-V: KVM: Delegate illegal instruction fault to VS mode RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs RISC-V: KVM: Factor-out g-stage page table management RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence RISC-V: KVM: Introduce struct kvm_gstage_mapping RISC-V: KVM: Factor-out MMU related declarations into separate headers RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect() RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range() RISC-V: KVM: Don't flush TLB when PTE is unchanged RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize() RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init() RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list ... |
||
|
Catalin Marinas
|
5b1ae9de71 |
Merge branch 'for-next/feat_mte_store_only' into for-next/core
* for-next/feat_mte_store_only: : MTE feature to restrict tag checking to store only operations kselftest/arm64/mte: Add MTE_STORE_ONLY testcases kselftest/arm64/mte: Preparation for mte store only test kselftest/arm64/abi: Add MTE_STORE_ONLY feature hwcap test KVM: arm64: Expose MTE_STORE_ONLY feature to guest arm64/hwcaps: Add MTE_STORE_ONLY hwcaps arm64/kernel: Support store-only mte tag check prctl: Introduce PR_MTE_STORE_ONLY arm64/cpufeature: Add MTE_STORE_ONLY feature |
||
|
Catalin Marinas
|
3ae8cef210 |
Merge branches 'for-next/livepatch', 'for-next/user-contig-bbml2', 'for-next/misc', 'for-next/acpi', 'for-next/debug-entry', 'for-next/feat_mte_tagged_far', 'for-next/kselftest', 'for-next/mdscr-cleanup' and 'for-next/vmap-stack', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: (23 commits) drivers/perf: hisi: Support PMUs with no interrupt drivers/perf: hisi: Relax the event number check of v2 PMUs drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver drivers/perf: hisi: Simplify the probe process for each DDRC version perf/arm-ni: Support sharing IRQs within an NI instance perf/arm-ni: Consolidate CPU affinity handling perf/cxlpmu: Fix typos in cxl_pmu.c comments and documentation perf/cxlpmu: Remove unintended newline from IRQ name format string perf/cxlpmu: Fix devm_kcalloc() argument order in cxl_pmu_probe() perf: arm_spe: Relax period restriction perf: arm_pmuv3: Add support for the Branch Record Buffer Extension (BRBE) KVM: arm64: nvhe: Disable branch generation in nVHE guests arm64: Handle BRBE booting requirements arm64/sysreg: Add BRBE registers and fields perf/arm: Add missing .suppress_bind_attrs perf/arm-cmn: Reduce stack usage during discovery perf: imx9_perf: make the read-only array mask static const perf/arm-cmn: Broaden module description for wider interconnect support ... * for-next/livepatch: : Support for HAVE_LIVEPATCH on arm64 arm64: Kconfig: Keep selects somewhat alphabetically ordered arm64: Implement HAVE_LIVEPATCH arm64: stacktrace: Implement arch_stack_walk_reliable() arm64: stacktrace: Check kretprobe_find_ret_addr() return value arm64/module: Use text-poke API for late relocations. * for-next/user-contig-bbml2: : Optimise the TLBI when folding/unfolding contigous PTEs on hardware with BBML2 and no TLB conflict aborts arm64/mm: Elide tlbi in contpte_convert() under BBML2 iommu/arm: Add BBM Level 2 smmu feature arm64: Add BBM Level 2 cpu feature arm64: cpufeature: Introduce MATCH_ALL_EARLY_CPUS capability type * for-next/misc: : Miscellaneous arm64 patches arm64/gcs: task_gcs_el0_enable() should use passed task arm64: signal: Remove ISB when resetting POR_EL0 arm64/mm: Drop redundant addr increment in set_huge_pte_at() arm64: Mark kernel as tainted on SAE and SError panic arm64/gcs: Don't call gcs_free() when releasing task_struct arm64: fix unnecessary rebuilding when CONFIG_DEBUG_EFI=y arm64/mm: Optimize loop to reduce redundant operations of contpte_ptep_get arm64: pi: use 'targets' instead of extra-y in Makefile * for-next/acpi: : Various ACPI arm64 changes ACPI: Suppress misleading SPCR console message when SPCR table is absent ACPI: Return -ENODEV from acpi_parse_spcr() when SPCR support is disabled * for-next/debug-entry: : Simplify the debug exception entry path arm64: debug: remove debug exception registration infrastructure arm64: debug: split bkpt32 exception entry arm64: debug: split brk64 exception entry arm64: debug: split hardware watchpoint exception entry arm64: debug: split single stepping exception entry arm64: debug: refactor reinstall_suspended_bps() arm64: debug: split hardware breakpoint exception entry arm64: entry: Add entry and exit functions for debug exceptions arm64: debug: remove break/step handler registration infrastructure arm64: debug: call step handlers statically arm64: debug: call software breakpoint handlers statically arm64: refactor aarch32_break_handler() arm64: debug: clean up single_step_handler logic * for-next/feat_mte_tagged_far: : Support for reporting the non-address bits during a synchronous MTE tag check fault kselftest/arm64/mte: Add mtefar tests on check_mmap_options kselftest/arm64/mte: Refactor check_mmap_option test kselftest/arm64/mte: Add verification for address tag in signal handler kselftest/arm64/mte: Add address tag related macro and function kselftest/arm64/mte: Check MTE_FAR feature is supported kselftest/arm64/mte: Register mte signal handler with SA_EXPOSE_TAGBITS kselftest/arm64: Add MTE_FAR hwcap test KVM: arm64: Expose FEAT_MTE_TAGGED_FAR feature to guest arm64: Report address tag when FEAT_MTE_TAGGED_FAR is supported arm64/cpufeature: Add FEAT_MTE_TAGGED_FAR feature * for-next/kselftest: : Kselftest updates for arm64 kselftest/arm64: Handle attempts to disable SM on SME only systems kselftest/arm64: Fix SVE write data generation for SME only systems kselftest/arm64: Test SME on SME only systems in fp-ptrace kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace kselftest/arm64: Allow sve-ptrace to run on SME only systems kselftest/arm4: Provide local defines for AT_HWCAP3 kselftest/arm64: Specify SVE data when testing VL set in sve-ptrace kselftest/arm64: Fix test for streaming FPSIMD write in sve-ptrace kselftest/arm64: Fix check for setting new VLs in sve-ptrace kselftest/arm64: Convert tpidr2 test to use kselftest.h * for-next/mdscr-cleanup: : Drop redundant DBG_MDSCR_* macros KVM: selftests: Change MDSCR_EL1 register holding variables as uint64_t arm64/debug: Drop redundant DBG_MDSCR_* macros * for-next/vmap-stack: : Force VMAP_STACK on arm64 arm64: remove CONFIG_VMAP_STACK checks from entry code arm64: remove CONFIG_VMAP_STACK checks from SDEI stack handling arm64: remove CONFIG_VMAP_STACK checks from stacktrace overflow logic arm64: remove CONFIG_VMAP_STACK conditionals from traps overflow stack arm64: remove CONFIG_VMAP_STACK conditionals from irq stack setup arm64: Remove CONFIG_VMAP_STACK conditionals from THREAD_SHIFT and THREAD_ALIGN arm64: efi: Remove CONFIG_VMAP_STACK check arm64: Mandate VMAP_STACK arm64: efi: Fix KASAN false positive for EFI runtime stack arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth() arm64/gcs: Don't call gcs_free() during flush_gcs() arm64: Restrict pagetable teardown to avoid false warning docs: arm64: Fix ICC_SRE_EL2 register typo in booting.rst |
||
|
Lorenzo Pieralisi
|
42d36969e3 |
docs: arm64: gic-v5: Document booting requirements for GICv5
Document the requirements for booting a kernel on a system implementing a GICv5 interrupt controller. Specifically, other than DT/ACPI providing the required firmware representation, define what traps must be disabled if the kernel is booted at EL1 on a system where EL2 is implemented. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-30-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Anshuman Khandual
|
ae344bcb0d |
arm64: Handle BRBE booting requirements
To use the Branch Record Buffer Extension (BRBE), some configuration is
necessary at EL3 and EL2. This patch documents the requirements and adds
the initial EL2 setup code, which largely consists of configuring the
fine-grained traps and initializing a couple of BRBE control registers.
Before this patch, __init_el2_fgt() would initialize HDFGRTR_EL2 and
HDFGWTR_EL2 with the same value, relying on the read/write trap controls
for a register occupying the same bit position in either register. The
'nBRBIDR' trap control only exists in bit 59 of HDFGRTR_EL2, while bit
59 of HDFGWTR_EL2 is RES0, and so this assumption no longer holds.
To handle HDFGRTR_EL2 and HDFGWTR_EL2 having (slightly) different bit
layouts, __init_el2_fgt() is changed to accumulate the HDFGRTR_EL2 and
HDFGWTR_EL2 control bits separately. While making this change the
open-coded value (1 << 62) is replaced with
HDFG{R,W}TR_EL2_nPMSNEVFR_EL1_MASK.
The BRBCR_EL1 and BRBCR_EL2 registers are unusual and require special
initialisation: even though they are subject to E2H renaming, both have
an effect regardless of HCR_EL2.TGE, even when running at EL2. So we
must initialize BRBCR_EL2 in case we run in nVHE mode. This is handled
in __init_el2_brbe() with a comment to explain the situation.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
[Mark: rewrite commit message, fix typo in comment]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Co-developed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
tested-by: Adam Young <admiyo@os.amperecomputing.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-2-e7775563036e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
||
|
Yeoreum Yun
|
f620372209 |
arm64/hwcaps: Add MTE_STORE_ONLY hwcaps
Since ARMv8.9, FEAT_MTE_STORE_ONLY can be used to restrict raise of tag check fault on store operation only. add MTE_STORE_ONLY hwcaps so that user can use this feature. Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Link: https://lore.kernel.org/r/20250618092957.2069907-5-yeoreum.yun@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Yeoreum Yun
|
7c7f55039b |
arm64: Report address tag when FEAT_MTE_TAGGED_FAR is supported
If FEAT_MTE_TAGGED_FAR (Armv8.9) is supported, bits 63:60 of the fault address
are preserved in response to synchronous tag check faults (SEGV_MTESERR).
This patch modifies below to support this feature:
- Use the original FAR_EL1 value when an MTE tag check fault occurs,
if ARM64_MTE_FAR is supported so that not only logical tag
(bits 59:56) but also address tag (bits 63:60] being reported too.
- Add HWCAP for mtefar to let user know bits 63:60 includes
address tag information when when FEAT_MTE_TAGGED_FAR is supported.
Applications that require this information should install
a signal handler with the SA_EXPOSE_TAGBITS flag.
While this introduces a minor ABI change,
most applications do not set this flag and therefore will not be affected.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250618084513.1761345-3-yeoreum.yun@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
||
|
Lorenzo Pieralisi
|
c0c7fa4e7a |
docs: arm64: Fix ICC_SRE_EL2 register typo in booting.rst
Fix trivial ICC_SRE_EL2 register spelling typo in booting.rst. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Will Deacon <will@kernel.org> CC: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250610120935.852034-1-lpieralisi@kernel.org Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Linus Torvalds
|
43db111107 |
ARM:
* Add large stage-2 mapping (THP) support for non-protected guests when pKVM is enabled, clawing back some performance. * Enable nested virtualisation support on systems that support it, though it is disabled by default. * Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and protected modes. * Large rework of the way KVM tracks architecture features and links them with the effects of control bits. While this has no functional impact, it ensures correctness of emulation (the data is automatically extracted from the published JSON files), and helps dealing with the evolution of the architecture. * Significant changes to the way pKVM tracks ownership of pages, avoiding page table walks by storing the state in the hypervisor's vmemmap. This in turn enables the THP support described above. * New selftest checking the pKVM ownership transition rules * Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests even if the host didn't have it. * Fixes for the address translation emulation, which happened to be rather buggy in some specific contexts. * Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N from the number of counters exposed to a guest and addressing a number of issues in the process. * Add a new selftest for the SVE host state being corrupted by a guest. * Keep HCR_EL2.xMO set at all times for systems running with the kernel at EL2, ensuring that the window for interrupts is slightly bigger, and avoiding a pretty bad erratum on the AmpereOne HW. * Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers from a pretty bad case of TLB corruption unless accesses to HCR_EL2 are heavily synchronised. * Add a per-VM, per-ITS debugfs entry to dump the state of the ITS tables in a human-friendly fashion. * and the usual random cleanups. LoongArch: * Don't flush tlb if the host supports hardware page table walks. * Add KVM selftests support. RISC-V: * Add vector registers to get-reg-list selftest * VCPU reset related improvements * Remove scounteren initialization from VCPU reset * Support VCPU reset from userspace using set_mpstate() ioctl x86: * Initial support for TDX in KVM. This finally makes it possible to use the TDX module to run confidential guests on Intel processors. This is quite a large series, including support for private page tables (managed by the TDX module and mirrored in KVM for efficiency), forwarding some TDVMCALLs to userspace, and handling several special VM exits from the TDX module. This has been in the works for literally years and it's not really possible to describe everything here, so I'll defer to the various merge commits up to and including commit |
||
|
Will Deacon
|
53a087046a |
Merge branch 'for-next/sme-fixes' into for-next/core
* for-next/sme-fixes: (35 commits)
arm64/fpsimd: Allow CONFIG_ARM64_SME to be selected
arm64/fpsimd: ptrace: Gracefully handle errors
arm64/fpsimd: ptrace: Mandate SVE payload for streaming-mode state
arm64/fpsimd: ptrace: Do not present register data for inactive mode
arm64/fpsimd: ptrace: Save task state before generating SVE header
arm64/fpsimd: ptrace/prctl: Ensure VL changes leave task in a valid state
arm64/fpsimd: ptrace/prctl: Ensure VL changes do not resurrect stale data
arm64/fpsimd: Make clone() compatible with ZA lazy saving
arm64/fpsimd: Clear PSTATE.SM during clone()
arm64/fpsimd: Consistently preserve FPSIMD state during clone()
arm64/fpsimd: Remove redundant task->mm check
arm64/fpsimd: signal: Use SMSTOP behaviour in setup_return()
arm64/fpsimd: Add task_smstop_sm()
arm64/fpsimd: Factor out {sve,sme}_state_size() helpers
arm64/fpsimd: Clarify sve_sync_*() functions
arm64/fpsimd: ptrace: Consistently handle partial writes to NT_ARM_(S)SVE
arm64/fpsimd: signal: Consistently read FPSIMD context
arm64/fpsimd: signal: Mandate SVE payload for streaming-mode state
arm64/fpsimd: signal: Clear PSTATE.SM when restoring FPSIMD frame only
arm64/fpsimd: Do not discard modified SVE state
...
|
||
|
D Scott Phillips
|
fed55f49fa |
arm64: errata: Work around AmpereOne's erratum AC04_CPU_23
On AmpereOne AC04, updates to HCR_EL2 can rarely corrupt simultaneous translations for data addresses initiated by load/store instructions. Only instruction initiated translations are vulnerable, not translations from prefetches for example. A DSB before the store to HCR_EL2 is sufficient to prevent older instructions from hitting the window for corruption, and an ISB after is sufficient to prevent younger instructions from hitting the window for corruption. Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250513184514.2678288-1-scott@os.amperecomputing.com Signed-off-by: Marc Zyngier <maz@kernel.org> |