In gfs2_ail1_flush, we're using I/O plugging to give the block layer a
better chance of merging I/O requests. If we're too aggressive here, we
can end up waiting on I/O to complete while still plugged. Fix that in
a way similar to writeback_sb_inodes, except that we can't use
blk_flush_plug because blk_flush_plug_list is not exported.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In the log, revokes are stored as a revoke descriptor (struct
gfs2_log_descriptor), followed by zero or more additional revoke blocks
(struct gfs2_meta_header). On filesystems with a blocksize of 4k, the
revoke descriptor contains up to 503 revokes, and the metadata blocks
contain up to 509 revokes each. We've so far been reserving space for
revokes in transactions in block granularity, so a lot more space than
necessary was being allocated and then released again.
This patch switches to assigning revokes to transactions individually
instead. Initially, space for the revoke descriptor is reserved and
handed out to transactions. When more revokes than that are reserved,
additional revoke blocks are added. When the log is flushed, the space
for the additional revoke blocks is released, but we keep the space for
the revoke descriptor block allocated.
Transactions may still reserve more revokes than they will actually need
in the end, but now we won't overshoot the target as much, and by only
returning the space for excess revokes at log flush time, we further
reduce the amount of contention between processes.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current log space allocation logic is hard to understand or extend.
The principle it that when the log is flushed, we may or may not have a
transaction active that has space allocated in the log. To deal with
that, we set aside a magical number of blocks to be used in case we
don't have an active transaction. It isn't clear that the pool will
always be big enough. In addition, we can't return unused log space at
the end of a transaction, so the number of blocks allocated must exactly
match the number of blocks used.
Simplify this as follows:
* When transactions are allocated or merged, always reserve enough
blocks to flush the transaction (err on the safe side).
* In gfs2_log_flush, return any allocated blocks that haven't been used.
* Maintain a pool of spare blocks big enough to do one log flush, as
before.
* In gfs2_log_flush, when we have no active transaction, allocate a
suitable number of blocks. For that, use the spare pool when
called from logd, and leave the pool alone otherwise. This means
that when the log is almost full, logd will still be able to do one
more log flush, which will result in more log space becoming
available.
This will make the log space allocator code easier to work with in
the future.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch takes advantage of the new glock holder sharing feature for
resource groups. We have already introduced local resource group
locking in a previous patch, so competing accesses of local processes
are already under control.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Introduce a new LM_FLAG_NODE_SCOPE glock holder flag: when taking a
glock in LM_ST_EXCLUSIVE (EX) mode and with the LM_FLAG_NODE_SCOPE flag
set, the exclusive lock is shared among all local processes who are
holding the glock in EX mode and have the LM_FLAG_NODE_SCOPE flag set.
From the point of view of other nodes, the lock is still held
exclusively.
A future patch will start using this flag to improve performance with
rgrp sharing.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Prepare for treating resource group glocks as exclusive among nodes but
shared among all tasks running on a node: introduce another layer of
node-specific locking that the local tasks can use to coordinate their
accesses.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add a rs_reserved field to struct gfs2_blkreserv to keep track of the number of
blocks reserved by this particular reservation, and a rd_reserved field to
struct gfs2_rgrpd to keep track of the total number of reserved blocks in the
resource group. Those blocks are exclusively reserved, as opposed to the
rs_requested / rd_requested blocks which are tracked in the reservation tree
(rd_rstree) and which can be stolen if necessary.
When making a reservation with gfs2_inplace_reserve, rs_reserved is set to
somewhere between ap->min_target and ap->target depending on the number of free
blocks in the resource group. When allocating blocks with gfs2_alloc_blocks,
rs_reserved is decremented accordingly. Eventually, any reserved but not
consumed blocks are returned to the resource group by gfs2_inplace_release.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
We keep track of what we've so far been referring to as reservations in
rd_rstree: the nodes in that tree indicate where in a resource group we'd
like to allocate the next couple of blocks for a particular inode. Local
processes take those as hints, but they may still "steal" blocks from those
extents, so when actually allocating a block, we must double check in the
bitmap whether that block is actually still free. Likewise, other cluster
nodes may "steal" such blocks as well.
One of the following patches introduces resource group glock sharing, i.e.,
sharing of an exclusively locked resource group glock among local processes to
speed up allocations. To make that work, we'll need to keep track of how many
blocks we've actually reserved for each inode, so we end up with two different
kinds of reservations.
Distinguish these two kinds by referring to blocks which are reserved but may
still be "stolen" as "requested". This rename also makes it more obvious that
rs_requested and rd_requested are strongly related.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_release, check if the inode has an active reservation to avoid
unnecessary lock taking.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
If gfs2_inplace_reserve has chosen a resource group but it couldn't make a
reservation there, there are too many other reservations in that resource
group. In that case, don't even try to respect existing reservations in
gfs2_alloc_blocks.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Only pass the current reservation down to gfs2_rbm_find rather than the entire
inode; we don't need any of the other information.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Pass a non-NULL minext to gfs2_rbm_find even for single-block allocations. In
gfs2_rbm_find, also set rgd->rd_extfail_pt when a single-block allocation
fails in a resource group: there is no reason for treating that case
differently. In gfs2_reservation_check_and_update, only check how many free
blocks we have if more than one block is requested; we already know there's at
least one free block.
In addition, when allocating N blocks fails in gfs2_rbm_find, we need to set
rd_extfail_pt to N - 1 rather than N: rd_extfail_pt defines the biggest
allocation that might still succeed.
Finally, reset rd_extfail_pt when updating the resource group statistics in
update_rgrp_lvb, as we already do in gfs2_rgrp_bh_get.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When starting an iomap write, gfs2_quota_lock_check -> gfs2_quota_lock
-> gfs2_quota_hold is called from gfs2_iomap_begin. At the end of the
write, before unlocking the quotas, punch_hole -> gfs2_quota_hold can be
called again in gfs2_iomap_end, which is incorrect and leads to a failed
assertion. Instead, move the call to gfs2_quota_unlock before the call
to punch_hole to fix that.
Fixes: 64bc06bb32 ("gfs2: iomap buffered write support")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add support for an additional filesystem version (sb_fs_format = 1802).
When a filesystem with the new version is mounted, the filesystem
supports "trusted.*" xattrs.
In addition, version 1802 filesystems implement a form of forward
compatibility for xattrs: when xattrs with an unknown prefix (ea_type)
are found on a version 1802 filesystem, those attributes are not shown
by listxattr, and they are not accessible by getxattr, setxattr, or
removexattr.
This mechanism might turn out to be what we need in the future, but if
not, we can always bump the filesystem version and break compatibility
instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Price <anprice@redhat.com>
Turn on rgrplvb by default for sb_fs_format > 1801.
Mount options still have to override this so a new args field to
differentiate between 'off' and 'not specified' is added, and the new
default is applied only when it's not specified.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Patch fb6791d100 was designed to allow gfs2 to unmount quicker by
skipping the step where it tells dlm to unlock glocks in EX with lvbs.
This was done because when gfs2 unmounts a file system, it destroys the
dlm lockspace shortly after it destroys the glocks so it doesn't need to
unlock them all: the unlock is implied when the lockspace is destroyed
by dlm.
However, that patch introduced a use-after-free in dlm: as part of its
normal dlm_recoverd process, it can call ls_recovery to recover dead
locks. In so doing, it can call recover_rsbs which calls recover_lvb for
any mastered rsbs. Func recover_lvb runs through the list of lkbs queued
to the given rsb (if the glock is cached but unlocked, it will still be
queued to the lkb, but in NL--Unlocked--mode) and if it has an lvb,
copies it to the rsb, thus trying to preserve the lkb. However, when
gfs2 skips the dlm unlock step, it frees the glock and its lvb, which
means dlm's function recover_lvb references the now freed lvb pointer,
copying the freed lvb memory to the rsb.
This patch changes the check in gdlm_put_lock so that it calls
dlm_unlock for all glocks that contain an lvb pointer.
Fixes: fb6791d100 ("GFS2: skip dlm_unlock calls in unmount")
Cc: stable@vger.kernel.org # v3.8+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_recover_one, fix a sd_log_flush_lock imbalance when a recovery
pass fails.
Fixes: c9ebc4b737 ("gfs2: allow journal replay to hold sd_log_flush_lock")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Keep the current value of the updated log tail in the super block as
sb_log_flush_tail instead of computing it on the fly. This avoids
unnecessary sd_ail_lock taking and cleans up the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Use a tighter bound for the number of blocks required by transactions in
gfs2_trans_begin: in the worst case, we'll have mixed data and metadata,
so we'll need a log desciptor for each type.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Wake up log waiters in gfs2_log_release when log space has actually become
available. This is a much better place for the wakeup than gfs2_logd.
Check if enough log space is immeditely available before anything else. If
there isn't, use io_wait_event to wait instead of open-coding it.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit 588bff95c9 added gfs2_write_log_header() and started using it in
clean_journal(), with an additional call to log_flush_wait() at the end of
gfs2_write_log_header() which is unnecessary for clean_journal(). Move
that call out of gfs2_write_log_header() to restore the previous behavior.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Move the read locking of sd_log_flush_lock from gfs2_log_reserve to
gfs2_trans_begin, and its unlocking from gfs2_log_release to
gfs2_trans_end. Use gfs2_log_release in two places in which it was open
coded before.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This counter and the associated wait queue are only used so that
gfs2_make_fs_ro can efficiently wait for all pending log space
allocations to fail after setting the filesystem to read-only. This
comes at the cost of waking up that wait queue very frequently.
Instead, when gfs2_log_reserve fails because the filesystem has become
read-only, Wake up sd_log_waitq. In gfs2_make_fs_ro, set the file
system read-only and then wait until all the log space has been
released. Give up and report the problem after a while. With that,
sd_reserving_log and sd_reserving_log_wait can be removed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Replace the TR_ALLOCED flag by its inverse, TR_ONSTACK: that way, the flag only
needs to be set in the exceptional case of on-stack transactions. Split off
__gfs2_trans_begin from gfs2_trans_begin and use it to replace the open-coded
version in gfs2_ail_empty_gl.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit 2e60d7683c ("GFS2: update freeze code to use freeze/thaw_super
on all nodes") optimized away the sb_start_intwrite ... sb_end_intwrite
protection for the on-stack transactions in gfs2_ail_empty_gl with no
explanation. I can't think of a valid reason for doing that, so revert
that change. This simplifies the next commit.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The recovery func can recover multiple journals, but they were all using
the same bio. This resulted in use-after-free related to sdp->sd_log_bio.
This patch moves the variable to the journal descriptor, jd, so that
every recovery can operate on its own bio. And hopefully we never run out.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
If go_free is defined, function signal_our_withdraw is supposed to
synchronize on the GLF_FREEING flag of the inode glock, but it
accidentally does that on the live glock. Fix that and disambiguate
the glock variables.
Fixes: 601ef0d52e ("gfs2: Force withdraw to replay journals and wait for it to finish")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This reverts commit 428fd95d85.
Patch 428fd95d85b2 added a call to log_flush_wait to function
gfs2_log_flush. Then gfs2_log_flush calls log_write_header which submits
a write request with the REQ_PREFLUSH flag which also forces it to wait.
This patch removes the unnecessary call to log_flush_wait.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
As gfs2_quotad_cachep and gfs2_glock_cachep have registered
shrinkers, amending SLAB_RECLAIM_ACCOUNT when creating them,
which improves slab accounting.
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_write_revokes doesn't actually write any revokes; instead, it
adds revokes to the system transaction during a flush.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The calc_reserved description claims that buf_limit is 502 (on 4k
filesystems), but it is actually 503. Fix / clarify the entire
description.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The BUF_OFFSET and DATABUF_OFFSET definitions are only used in buf_limit
and databuf_limit, respectively, and the rounding done in those
definitions is immediately wiped out by dividing by the element size.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When reading a resource group from disk or when receiving the resource group
statistics from a Lock Value Block (LVB), set/clear the GBF_FULL flags of all
bitmaps in that resource group according to whether or not the resource group
is full.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Removing a reservation doesn't make any actual space available, so don't clear
the GBF_FULL flags in that case. Otherwise, we'll only spend more time
scanning the bitmaps unnecessarily.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This reverts commit e79e0e1428.
It turns out that we're only setting the GBF_FULL flag of a bitmap if we've
been scanning from the beginning of the bitmap until the end and we haven't
found a single free block, and we're not skipping reservations in that process,
either. This means that in gfs2_rbm_find, we can always skip bitmaps with the
GBF_FULL flag set.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Variable ndata is only used inside "if (!dinode)", so it can be replaced
entirely with *nblocks.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
GFS2 uses struct gfs2_rbm to represent a filesystem block number as a
bit position within a resource group. This representation is used in
the bitmap manipulation code to prevent excessive conversions between
block numbers and bit positions, but also in struct gfs2_blkreserv which
is part of struct gfs2_inode, to mark the start of a reservation. In
the inode, the bit position representation makes less sense: first, the
start position is used as a block number about as often as a bit
position; second, the bit position representation makes the code
unnecessarily complicated and difficult to read.
Therefore, change struct gfs2_blkreserv to represent the start of a
reservation as a block number instead of a bit position. (This requires
keeping track of the resource group in gfs2_blkreserv separately.) With
that change, various things can be slightly simplified, and struct
gfs2_rbm can be moved to rgrp.c.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Change gfs2_rbm_incr to advance an rbm by a given number of blocks. Use that
in gfs2_reservation_check_and_update to save a gfs2_rbm_to_block ->
gfs2_rbm_from_block round trip.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
- Fix 'CPU too large' error in Intel PT.
- Correct event attribute sizes in 'perf inject'.
- Sync build_bug.h and kvm.h kernel copies.
- Fix bpf.h header include directive in 5sec.c 'perf trace' bpf example.
- libbpf tests fixes.
- Fix shadow stat 'perf test' for non-bash shells.
- Take cgroups into account for shadow stats in 'perf stat'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
$ grep "model name" -m1 /proc/cpuinfo
model name: AMD Ryzen 9 3900X 12-Core Processor
# export PERF_TARBALL=http://192.168.86.5/perf/perf-5.11.0-rc3.tar.xz
# dm
1 66.93 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 68.65 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 73.00 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 79.04 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 79.71 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 82.51 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 103.45 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 113.86 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 109.31 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 113.90 alpine:edge : Ok gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1
11 66.76 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 83.71 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0
13 80.70 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1
14 62.75 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 97.65 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-12), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 21.18 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 21.07 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 25.83 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
19 30.65 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)
20 93.44 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 10.0.1 (Red Hat 10.0.1-1.module_el8.3.0+467+cb298d5b)
21 60.64 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20201217 releases/gcc-10.2.0-643-g7cbb07d2fc, clang version 10.0.1
22 74.57 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
23 75.40 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
24 72.75 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8+deb10u2 (tags/RELEASE_701/final)
25 72.36 debian:experimental : Ok gcc (Debian 10.2.1-6) 10.2.1 20210110, Debian clang version 11.0.1-2
26 32.35 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110
27 28.65 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 10.2.1-3) 10.2.1 20201224
28 13.79 debian:experimental-x-mipsel : FAIL mipsel-linux-gnu-gcc (Debian 10.2.1-3) 10.2.1 20201224
CC /tmp/build/perf/util/map.o
util/map.c: In function 'map__new':
util/map.c:109:5: error: '%s' directive output may be truncated writing between 1 and 2147483645 bytes into a region of size 4096 [-Werror=format-truncation=]
109 | "%s/platforms/%s/arch-%s/usr/lib/%s",
| ^~
In file included from /usr/mipsel-linux-gnu/include/stdio.h:867,
from util/symbol.h:11,
from util/map.c:2:
/usr/mipsel-linux-gnu/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 32 or more bytes (assuming 4294967321) into a destination of size 4096
67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
68 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
29 29.14 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
30 30.66 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
31 66.33 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
32 77.51 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
33 25.23 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
34 79.68 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
35 93.09 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
36 94.12 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
37 101.97 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
38 107.51 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
39 111.24 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
40 25.85 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
41 110.61 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-4.fc31)
42 93.78 fedora:32 : Ok gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 10.0.1 (Fedora 10.0.1-3.fc32)
43 91.51 fedora:33 : Ok gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9), clang version 11.0.0 (Fedora 11.0.0-2.fc33)
44 92.75 fedora:34 : Ok gcc (GCC) 11.0.0 20210113 (Red Hat 11.0.0-0), clang version 11.0.1 (Fedora 11.0.1-4.fc34)
45 92.33 fedora:rawhide : Ok gcc (GCC) 11.0.0 20210109 (Red Hat 11.0.0-0), clang version 11.0.1 (Fedora 11.0.1-4.fc34)
46 33.58 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.3.0-r1 p3) 9.3.0
47 66.03 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
48 84.73 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
49 98.35 manjaro:latest : Ok gcc (GCC) 10.2.0, clang version 10.0.1
50 223.15 openmandriva:cooker : Ok gcc (GCC) 10.2.0 20200723 (OpenMandriva), OpenMandriva 11.0.0-1 clang version 11.0.0 (/builddir/build/BUILD/llvm-project-llvmorg-11.0.0/clang 63e22714ac938c6b537bd958f70680d3331a2030)
51 117.30 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190905 [gcc-7-branch revision 275407], clang version 5.0.1 (tags/RELEASE_501/final 312548)
52 124.82 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
53 113.33 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
54 106.17 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
55 108.15 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.2.1 20200825 [revision c0746a1beb1ba073c7981eb09f55b3d993b32e5c], clang version 10.0.1
56 25.57 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
57 30.86 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44.0.3)
58 91.75 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.1), clang version 10.0.1 (Red Hat 10.0.1-1.0.1.module+el8.3.0+7827+89335dbf)
59 27.64 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
60 29.65 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
61 75.65 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
62 25.57 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
63 25.52 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
64 25.01 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 25.51 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
66 25.70 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
67 24.95 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
68 87.96 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
69 27.40 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
70 27.14 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
71 22.68 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
72 26.52 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 28.97 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
74 28.54 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
75 163.57 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
76 24.07 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
77 26.77 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
78 24.00 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
79 69.36 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final)
80 27.07 ubuntu:19.10-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
81 24.29 ubuntu:19.10-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
82 74.99 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, clang version 10.0.0-4ubuntu1
83 30.49 ubuntu:20.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 10.2.0-5ubuntu1~20.04) 10.2.0
84 73.54 ubuntu:20.10 : Ok gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, Ubuntu clang version 11.0.0-2
$
# uname -a
Linux quaco 5.10.7-100.fc32.x86_64 #1 SMP Tue Jan 12 20:25:28 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
648b054a46 perf inject: Correct event attribute sizes
# perf version --build-options
perf version 5.11.rc3.g648b054a4647
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
libpfm4: [ OFF ] # HAVE_LIBPFM
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip (missing hardware support)
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : Ok
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Ok
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: Parse and process metrics : Ok
68: PE file support : Ok
69: Event expansion for cgroups : Ok
70: Convert perf time to TSC : Ok
71: x86 rdpmc : Ok
72: DWARF unwind : Ok
73: x86 instruction decoder - new instructions : Ok
74: Intel PT packet decoder : Ok
75: x86 bp modify : Ok
76: probe libc's inet_pton & backtrace it with ping : Ok
77: Use vfs_getname probe to get syscall args filenames : Ok
78: Check Arm CoreSight trace data recording and synthesized samples: Skip
79: perf stat metrics (shadow stat) test : Ok
80: build id cache operations : Ok
81: Add vfs_getname probe to get syscall args filenames : Ok
82: Check open filename arg using perf trace + vfs_getname : Ok
83: Zstd perf.data compression/decompression : Ok
$ make -C tools/perf build-test
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_no_libpython_O: make NO_LIBPYTHON=1
make_no_sdt_O: make NO_SDT=1
make_tags_O: make tags
make_install_O: make install
make_install_bin_O: make install-bin
make_debug_O: make DEBUG=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_no_libelf_O: make NO_LIBELF=1
make_cscope_O: make cscope
make_no_backtrace_O: make NO_BACKTRACE=1
make_no_libnuma_O: make NO_LIBNUMA=1
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_no_newt_O: make NO_NEWT=1
make_with_babeltrace_O: make LIBBABELTRACE=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_no_libunwind_O: make NO_LIBUNWIND=1
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_doc_O: make doc
make_perf_o_O: make perf.o
make_no_gtk2_O: make NO_GTK2=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_clean_all_O: make clean all
make_no_demangle_O: make NO_DEMANGLE=1
make_with_gtk2_O: make GTK2=1
make_util_map_o_O: make util/map.o
make_pure_O: make
make_no_libbionic_O: make NO_LIBBIONIC=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_no_libbpf_O: make NO_LIBBPF=1
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_help_O: make help
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_install_prefix_O: make install prefix=/tmp/krava
make_no_auxtrace_O: make NO_AUXTRACE=1
make_with_libpfm4_O: make LIBPFM4=1
make_no_libperl_O: make NO_LIBPERL=1
make_no_slang_O: make NO_SLANG=1
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYASljgAKCRCyPKLppCJ+
J/E/AQCOGFqF7UmEzuuTecWeeBNCwVyD3woHLU13ll/e5VLNggD/YD9t8CZS+vwy
21yL4/yXZloLFE48OCLRNWeq91FL/gs=
=uZDD
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-2021-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'CPU too large' error in Intel PT
- Correct event attribute sizes in 'perf inject'
- Sync build_bug.h and kvm.h kernel copies
- Fix bpf.h header include directive in 5sec.c 'perf trace' bpf example
- libbpf tests fixes
- Fix shadow stat 'perf test' for non-bash shells
- Take cgroups into account for shadow stats in 'perf stat'
* tag 'perf-tools-fixes-2021-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf inject: Correct event attribute sizes
perf intel-pt: Fix 'CPU too large' error
perf stat: Take cgroups into account for shadow stats
perf stat: Introduce struct runtime_stat_data
libperf tests: Fail when failing to get a tracepoint id
libperf tests: If a test fails return non-zero
libperf tests: Avoid uninitialized variable warning
perf test: Fix shadow stat test for non-bash shells
tools headers: Syncronize linux/build_bug.h with the kernel sources
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf bpf examples: Fix bpf.h header include directive in 5sec.c example
One fix for a lack of alignment in our linker script, that can lead to crashes
depending on configuration etc.
One fix for the 32-bit VDSO after the C VDSO conversion.
Thanks to:
Andreas Schwab, Ariel Marcovitch, Christophe Leroy.
-----BEGIN PGP SIGNATURE-----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=jpfR
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a lack of alignment in our linker script, that can lead to
crashes depending on configuration etc.
One fix for the 32-bit VDSO after the C VDSO conversion.
Thanks to Andreas Schwab, Ariel Marcovitch, and Christophe Leroy"
* tag 'powerpc-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: Fix clock_gettime_fallback for vdso32
powerpc: Fix alignment bug within the init sections
