Kyoji Ogasawara says:
====================
smc-sysctl formatting and missing entries
update SMC sysctl documentation in two small steps.
- patch 1 fixes indentation in the smcr_buf_type section
- patch 2 documents missing sysctl parameters limit_smc_hs and hs_ctrl,
including values/defaults and hs_ctrl usage notes
====================
Link: https://patch.msgid.link/20260309124541.22723-1-sawara04.o@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smcr_buf_type section used inconsistent indentation compared
with the rest of this document.
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: D. Wythe<alibuda@linux.alibaba.com>
Link: https://patch.msgid.link/20260309124541.22723-2-sawara04.o@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mike Marciniszyn says:
====================
eth fbnic: Add fbnic self tests
From: "Mike Marciniszyn (Meta)" <mike.marciniszyn@gmail.com>
This series adds self tests to test the registers, the
msix interrupts, the tlv, and the firmware mailbox.
This series assumes that the
[PATCH net-next 0/2] Add debugfs hooks [1]
is present.
When the self tests are run the with ethtool -t:
ethtool -t eth0
The test result is PASS
The test extra info:
Register test (offline) 0
MSI-X Interrupt test (offline) 0
FW mailbox test (on/offline) 0
====================
Link: https://patch.msgid.link/20260307105847.1438-1-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The TLV (Type-Value-Length) self uses a known set of data to create a
TLV message. These routines support the MBX self test by creating
the test messages and parsing the response message coming back
from the firmware.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260307105847.1438-5-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This function is meant to test the global interrupt registers and the
PCIe IP MSI-X functionality. It essentially goes through and tests
various combinations of the set, clear, and mask bits in order to
verify the behavior is as we expect it to be from the driver.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260307105847.1438-4-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The register test will be used to verify hardware is behaving as expected.
The test itself will have us writing to registers that should have no
side effects due to us resetting after the test has been completed.
While the test is being run the interface should be offline.
This patch counts on the first patch of this series to export netif_open()
and also ensures that the half close calls netif_close() to
avoid deadlock.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260307105847.1438-3-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dev_open() already is exported, but drivers which use the netdev
instance lock need to use netif_open() instead. netif_close() is
also already exported [1] so this completes the pairing.
This export is required for the following fbnic self tests to
avoid calling ndo_stop() and ndo_open() in favor of the
more appropriate netif_open() and netif_close() that notifies
any listeners that the interface went down to test and is now
coming back up.
Link: https://patch.msgid.link/20250309215851.2003708-1-sdf@fomichev.me [1]
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260307105847.1438-2-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As a part of MANA hardening for CVM, add validation for the doorbell
ID (db_id) received from hardware in the GDMA_REGISTER_DEVICE response
to prevent out-of-bounds memory access when calculating the doorbell
page address.
In mana_gd_ring_doorbell(), the doorbell page address is calculated as:
addr = db_page_base + db_page_size * db_index
= (bar0_va + db_page_off) + db_page_size * db_index
A hardware could return values that cause this address to fall outside
the BAR0 MMIO region. In Confidential VM environments, hardware responses
cannot be fully trusted.
Add the following validations:
- Store the BAR0 size (bar0_size) in gdma_context during probe.
- Validate the doorbell page offset (db_page_off) read from device
registers does not exceed bar0_size during initialization, converting
mana_gd_init_registers() to return an error code.
- Validate db_id from GDMA_REGISTER_DEVICE response against the
maximum number of doorbell pages that fit within BAR0.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260306211212.543376-1-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change allows to set GDM forward port configuration to
FE_PSE_PORT_DROP stopping the network device. Hw design requires to stop
packet forwarding putting the interface down. Moreover, PPE firmware
requires to use PPE1 for GDM3 or GDM4.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260306-airoha-gdm-forward-ndo-open-stop-v1-1-7b7a20dd9ef0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King says:
====================
net: stmmac: further ptp cleanups
The first uses a local variable when setting n_ext_ts which is a minor
simplification of the code. The second removes the now unnecessary
"available" flag for the PPS outputs.
====================
Link: https://patch.msgid.link/aawDiK7DjcSXSs1X@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
priv->pps[].available is set in stmmac_ptp_register() for all PPS
outputs reported by hardware up to STMMAC_PPS_MAX.
Since we now set priv->ptp_clock_ops.n_per_out to the number of PPS
outputs that both the hardware and driver can support to prevent
array overflow in stmmac_enable(), this makes priv->pps[].available
redundant. Remove this struct member.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vypHc-0000000CSbl-1X6v@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_dwmac4_get_mac_addr() is identical to stmmac_get_mac_addr().
Remove stmmac_dwmac4_get_mac_addr() to avoid this code duplication.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vypJM-0000000CSiJ-48yO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make the printing of HFSC's defcls consistent with HTB's,
iproute2 is now printing defcls prepended with "0x".
This commit adapts test a4c3 to this change.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260307220724.2501212-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_chrono_start() is small enough, and used in TCP sendmsg()
fast path (from tcp_skb_entail()).
Note clang is already inlining it from functions in tcp_output.c.
Inlining it improves performance and reduces bloat :
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 1/-84 (-83)
Function old new delta
tcp_skb_entail 280 281 +1
__pfx_tcp_chrono_start 16 - -16
tcp_chrono_start 68 - -68
Total: Before=25192434, After=25192351, chg -0.00%
Note that tcp_chrono_stop() is too big.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260308123549.2924460-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chrono_type is currently in tcp_sock_read_txrx group, which
is supposed to hold read-mostly fields.
But chrono_type is mostly written in tx path, it should
be moved to tcp_sock_write_tx group, close to other
chrono fields (chrono_stat[], chrono_start).
Note this adds holes, but data locality is far more important.
Use a full u8 for the time being, compiler can generate
more efficient code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260308122302.2895067-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some modern cpus disable X86_FEATURE_RETPOLINE feature,
even if a direct call can still be beneficial.
Even when IBRS is present, an indirect call is more expensive
than a direct one:
Direct Calls:
Compilers can perform powerful optimizations like inlining,
where the function body is directly inserted at the call site,
eliminating call overhead entirely.
Indirect Calls:
Inlining is much harder, if not impossible, because the compiler
doesn't know the target function at compile time.
Techniques like Indirect Call Promotion can help by using
profile-guided optimization to turn frequently taken indirect calls
into conditional direct calls, but they still add complexity
and potential overhead compared to a truly direct call.
In this patch, I split tc_skip_wrapper in two different
static keys, one for tc_act() (tc_skip_wrapper_act)
and one for tc_classify() (tc_skip_wrapper_cls).
Then I enable the tc_skip_wrapper_cls only if the count
of builtin classifiers is above one.
I enable tc_skip_wrapper_act only it the count of builtin
actions is above one.
In our production kernels, we only have CONFIG_NET_CLS_BPF=y
and CONFIG_NET_ACT_BPF=y. Other are modules or are not compiled.
Tested on AMD Turin cpus, cls_bpf_classify() cost went
from 1% down to 0.18 %, and FDO will be able to inline
it in tcf_classify() for further gains.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260307133601.3863071-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 18fd64d254 ("netns-ipv4: reorganize netns_ipv4 fast path
variables") missed that __tcp_select_window() is reading
net->ipv4.sysctl_tcp_shrink_window.
Move this field to netns_ipv4_read_txrx group, as __tcp_select_window()
is used both in tx and rx paths.
Saves a potential cache line miss.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260307092214.2433548-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Flow control source port mapping for USB serdes needs to be configured
according to the GDM port nbq parameter. This is a preliminary patch
since nbq parameter is specific for the given port serdes and needs to
be read from the DTS (in the current codebase is assigned statically).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260306-airoha-fix-loopback-for-usb-serdes-v2-1-319de9c96826@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable support for UDP GSO when using DQO format. Advertise the feature
flag during device initialization and enable offload by default.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260306224816.3391551-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib6_nexthop() retrieves the link-local address for two interfaces used
in the test. However, both lldummy and llv1 are obtained from dummy0.
llv1 is expected to be retrieved from veth1, which is the interface used
later in the test. The subsequent check and error message also expect
the address to be retrieved from veth1.
Fix this by retrieving llv1 from veth1.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20260306180830.2329477-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert remaining users of of_gpio.h to using GPIO descriptors and
remove the header.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEkeUTLeW1Rh17omX8BZ0uy/82hMMFAmmuknAACgkQBZ0uy/82
hMMfkxAAg+bO9CKHjgb8d6ZXTlvhlNdJcJmRanHHBqTYOFmEps0M46uAGSUukGCK
H4Yq1ZyMelIryagh6KOZChu78eVwtrti3Vo9S+0moQK7fgxDuE2y4JEihAf0w9WX
TKPwfkWA+dlEFqgU397m0nzOJyR5AuORFLWl6YQ4WofdMXsALBnZ3WkZPj7/n5/P
3rNNI2KfXSWVl537+seajIyOHL++MbYkEEid68ect+TUNQuTasNJPRTTKULJNGqJ
eqOlV1iOvfsQb43uwUOJjk471PxuNdR+5qHh7U65ZMVbZrwJ5Ggvs77Yl6jg7KsU
vDAzbURslAzEwQXkhDdxZVvhp32KAn4ogOh+KPmEh67Own8TSXNgOXIxHvF9ujCM
36MGxZRJe+bM2s9J6y2WpjnTG5qlMqcNZ+Ye0Ik9NK2WKyE7liTQlEDB75KoY6qR
83VZsZrjI4W2Nj9G+jlqU6vMEC8rajoPSRSc9SlGL/W+eSfW5f5wCaIXXpk+FaEP
IypdtHQPejkLIsAYFAQAjobBLaJ9YK7tZEoM7nCvoOLSKTbzSGaaOrMfpd1wp2WY
sPJnz/U3mwQHt2n7gqMXRHu+pS+aX04OI4p+juqxWYZshB2ayjZa9+g3SH0OKBSb
lY5YGkXaHuNgsq+5s+sE8mnff6sVy0RiSdEwbHdRIaVQQSEKFd8=
=5K56
-----END PGP SIGNATURE-----
Merge tag 'ib-gpio-remove-of-gpio-h-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into mbox
Bartosz Golaszewski says:
====================
Immutable branch between GPIO and net
Convert remaining users of of_gpio.h to using GPIO descriptors and
remove the header.
* tag 'ib-gpio-remove-of-gpio-h-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: remove of_get_named_gpio() and <linux/of_gpio.h>
nfc: nfcmrvl: convert to gpio descriptors
nfc: s3fwrn5: convert to gpio descriptors
====================
Link: https://patch.msgid.link/20260309093153.10446-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, ppp_input_error() indicates an error by allocating a 0-length
skb and calling ppp_do_recv(). It takes an error code argument, which is
stored in skb->cb, but not used by ppp_receive_frame().
Simplify the error handling by removing the unused parameter and the
unnecessary skb allocation. Instead, call ppp_receive_error() directly
from ppp_input_error() under the recv lock, and the length check in
ppp_receive_frame() can be removed.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_kfree_skbs() reduces RTNL and qdisc spinlock hold time.
skbs are freed later after RTNL has been released.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260306133154.678730-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver uses packet-type (RX/TX) PTP-message type and PTP-sequence
number to identify a matching timestamp packet for a skb. If the same
PTP packet arrives on both ports (as in a PRP environment) then it is
not obvious which event belongs to which skb.
The event contains also the port number on which it was received.
Instead of masking it out, use it for matching.
Tested-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Martin Kaistra <martin.kaistra@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260306144439.cVwaaopR@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following typical script is extremely disruptive,
because each graft operation calls dev_deactivate()
which resets all the queues of the device.
QPARAM="limit 100000 flow_limit 1000 buckets 4096"
TXQS=64
for ETH in eth1
do
tc qd del dev $ETH root 2>/dev/null
tc qd add dev $ETH root handle 1: mq
for i in `seq 1 $TXQS`
do
slot=$( printf %x $(( i )) )
tc qd add dev $ETH parent 1:$slot fq $QPARAM
done
done
One can add "ip link set dev $ETH down/up" to reduce the disruption time:
QPARAM="limit 100000 flow_limit 1000 buckets 4096"
TXQS=64
for ETH in eth1
do
ip link set dev $ETH down
tc qd del dev $ETH root 2>/dev/null
tc qd add dev $ETH root handle 1: mq
for i in `seq 1 $TXQS`
do
slot=$( printf %x $(( i )) )
tc qd add dev $ETH parent 1:$slot fq $QPARAM
done
ip link set dev $ETH up
done
Or we can add a @reset_needed flag to dev_deactivate() and
dev_deactivate_many().
This flag is set to true at device dismantle or linkwatch_do_dev(),
and to false for graft operations.
In the future, we might only stop one queue instead of the whole
device, ie call dev_deactivate_queue() instead of dev_deactivate().
I think the problem (quadratic behavior) was added in commit
2fb541c862 ("net: sch_generic: aviod concurrent reset and enqueue op
for lockless qdisc") but this does not look serious enough to deserve
risky backports.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260307163430.470644-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If incoming skb dst matches the socket cached one,
there is no need to call again dst->ops->check().
Network layer already validated the skb dst for us,
usually from tcp_v{4,6}_early_demux().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260306154322.1086539-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Combining the allocations simplifies things, especially the free path.
Remove ofdpa_group_tbl_entry_free as a result. kfree is shorter.
Add __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260306025449.12333-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_v4_early_demux() has a single caller : ip_rcv_finish_core().
Move it to net/ipv4/ip_input.c and mark it static, for possible
compiler/linker optimizations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260306131130.654991-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hash_size is declared but never read. The MD5 path always uses a
fixed size of 16, and the TCP-AO path uses tcp_ao_maclen().
This closes a 7-byte hole and reduces the struct size from 96 to
88 bytes.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Keita Morisaki <kmta1236@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260307051619.51685-1-kmta1236@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add SPDX-License-Identifier lines to several source
files under the network sub-directory. Work on files
in the core, dns_resolver, ipv4, ipv6 and
netfilter sub-dirs. Remove boilerplate
and license reference text to avoid ambiguity.
Rusty Russell has expressed that his contributions
were intended to be GPL-2.0-or-later.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://patch.msgid.link/20260305004724.87469-1-tim.bird@sony.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl: convert samples into selftests
The "samples" were always poor man's tests, used to manually
confirm that C YNL works as expected. Since a proper tests/
directory now exists move the samples and use the kselftest
harness to turn them into selftests outputting KTAP.
====================
Link: https://patch.msgid.link/20260307033630.1396085-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert rt-route.c to use kselftest_harness.h with FIXTURE/TEST_F.
This is the last test to convert so clean up the Makefile.
Validate that the connected routes for 192.168.1.0/24 and
2001:db8::/64 appear in the dump.
Output:
TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN rt_route.dump ...
# oif: nsim0 dst: 192.168.1.0/24
# oif: lo dst: ::1/128
# oif: nsim0 dst: 2001:db8::1/128
# oif: nsim0 dst: 2001:db8::/64
# oif: nsim0 dst: fe80::/64
# oif: nsim0 dst: ff00::/8
# OK rt_route.dump
ok 1 rt_route.dump
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert rt-addr.c to use kselftest_harness.h with FIXTURE/TEST_F.
Validate that the addresses configured by the wrapper (192.168.1.1
and 2001:db8::1) appear in the dump.
Output:
TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN rt_addr.dump ...
# lo: 127.0.0.1
# nsim0: 192.168.1.1
# lo: ::1
# nsim0: 2001:db8::1
# nsim0: fe80::7c66:c9ff:fe5f:bf01
# OK rt_addr.dump
ok 1 rt_addr.dump
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert ethtool.c to use kselftest_harness.h with FIXTURE/TEST_F.
Move ethtool from BINS to TEST_GEN_FILES and add ethtool.sh wrapper
which sets up a netdevsim device before running the test binary.
Output:
TAP version 13
1..2
# Starting 2 tests from 1 test cases.
# RUN ethtool.channels ...
# nsim0: combined 1
# OK ethtool.channels
ok 1 ethtool.channels
# RUN ethtool.rings ...
# nsim0: rx 512 tx 512
# OK ethtool.rings
ok 2 ethtool.rings
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert devlink.c to use kselftest_harness.h with FIXTURE/TEST_F.
Move devlink from BINS to TEST_GEN_FILES in the Makefile since
it's invoked via the devlink.sh wrapper which sets up netdevsim.
Output:
TAP version 13
1..2
# Starting 2 tests from 1 test cases.
# RUN devlink.dump ...
# netdevsim/netdevsim1337
# OK devlink.dump
ok 1 devlink.dump
# RUN devlink.info ...
# netdevsim/netdevsim1337:
# driver: netdevsim
# running fw:
# fw.mgmt: 10.20.30
# OK devlink.info
ok 2 devlink.info
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some tests need netdevsim setup which is painful to do from C.
Add ynl_nsim_lib.sh, a shared library providing nsim_setup and
nsim_cleanup functions for tests that need a netdevsim device.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert tc.c and tc-filter-add.c to produce KTAP output with
kselftest_harness. Merge the two tests together. They both
test TC one is testing qdisc and the other classifiers but
they can easily live in a single selftest.
Make the test spawn a new netns, and run the operations on
lo to avoid onerous setup and cleanup.
TAP version 13
1..2
# Starting 2 tests from 1 test cases.
# RUN tc.qdisc ...
# lo: fq_codel limit: 10240p target: 5ms new_flow_cnt: 0
# OK tc.qdisc
ok 1 tc.qdisc
# RUN tc.flower ...
# flower pref 1 proto: 0x8100
# flower:
# vlan_id: 100
# vlan_prio: 5
# num_of_vlans: 3
# action order: 1 vlan push id 200 protocol 0x8100 priority 0
# action order: 2 vlan push id 300 protocol 0x8100 priority 0
# OK tc.flower
ok 2 tc.flower
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert rt-link.c to use kselftest_harness.h with FIXTURE/TEST_F.
Move rt-link from BINS to TEST_GEN_PROGS.
Output:
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN rt_link.dump ...
# 1: lo: mtu 65536
# 2: sit0: mtu 1480 kind sit
# OK rt_link.dump
ok 1 rt_link.dump
# RUN rt_link.netkit ...
# 4: nk1: mtu 1500 kind netkit primary 1 policy blackhole
# OK rt_link.netkit
ok 2 rt_link.netkit
# RUN rt_link.netkit_err_msg ...
# OK rt_link.netkit_err_msg
ok 3 rt_link.netkit_err_msg
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert ovs.c to produce KTAP output with kselftest_harness.
The single "crud" test creates a new OVS datapath, fetches it back
by name, then dumps all datapaths verifying the new one appears.
IIRC I added this test because ovs is a genetlink family but
has a family-specific fixed header.
TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN ovs.crud ...
# get:
# ynl-test(3): pid:0 cache:256
# dump:
# ynl-test(3): pid:0 cache:256
# OK ovs.crud
ok 1 ovs.crud
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert netdev.c to produce KTAP output with 3 tests:
- dev_dump: dump all netdev devices, skip if empty
- dev_get: query first device from dump by ifindex
- ntf_check: subscribe to "mgmt", create a veth via rt-link,
verify netdev notification is received, then delete the veth
Remove stdin/scanf-based UI. Add rt-link dependency for the veth
notification test.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN netdev.dump ...
# lo[1] xdp-features (0): xdp-rx-metadata-features (0): xsk-fea...
# sit0[2] xdp-features (0): xdp-rx-metadata-features (0): xsk-fea...
# OK netdev.dump
ok 1 netdev.dump
# RUN netdev.get ...
# lo[1] xdp-features (0): xdp-rx-metadata-features (0): xsk-fea...
# OK netdev.get
ok 2 netdev.get
# RUN netdev.ntf_check ...
# veth0[7] xdp-features (0): xdp-rx-metadata-features (7): timesta...
# OK netdev.ntf_check
ok 3 netdev.ntf_check
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "samples" were always poor man's tests (used to manually
confirm that C YNL works).
Move all C sample programs from tools/net/ynl/samples/ to
tools/net/ynl/tests/, "merge" the Makefiles. The subsequent
changes will convert each sample into a proper KTAP selftests.
Since these are now tests rather than samples - default to
enabling asan. After all we're testing user space code here.
Sort the gitignore while at it, the page-pool entry was a leftover
so delete it.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All in-tree consumers have been converted to the descriptor-based API.
Remove the deprecated of_get_named_gpio() helper, delete the
<linux/of_gpio.h> header, and drop the corresponding entry from
MAINTAINERS.
Also remove the completed TODO item for this cleanup.
Signed-off-by: Jialu Xu <xujialu@vimux.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/02ABDA1F9E3FAF1F+20260307030623.3495092-6-xujialu@vimux.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Replace the legacy of_get_named_gpio() / gpio_request_one() /
gpio_set_value() API with the descriptor-based devm_gpiod_get_optional() /
gpiod_set_value() API from <linux/gpio/consumer.h>, removing the
dependency on <linux/of_gpio.h>.
The "reset-n-io" property rename quirk already exists in gpiolib-of.c
(added in commit 9c2cc7171e), so no additional quirk is needed.
Signed-off-by: Jialu Xu <xujialu@vimux.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/DD684946FD7EE161+20260307030623.3495092-4-xujialu@vimux.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Replace the legacy of_get_named_gpio() / gpio_request_one() /
gpio_set_value() API with the descriptor-based devm_gpiod_get() /
gpiod_set_value() API from <linux/gpio/consumer.h>, removing the
dependency on <linux/of_gpio.h>.
This removes the s3fwrn5_i2c_parse_dt() and s3fwrn82_uart_parse_dt()
functions since devm_gpiod_get() handles both DT lookup and resource
management. The gpio_en and gpio_fw_wake fields in struct phy_common
are changed from int to struct gpio_desc *.
Add rename quirks in gpiolib-of.c for the deprecated "s3fwrn5,en-gpios"
and "s3fwrn5,fw-gpios" properties to maintain backward compatibility
with old device trees.
Signed-off-by: Jialu Xu <xujialu@vimux.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/94FF47746A92BD6B+20260307030623.3495092-2-xujialu@vimux.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The pmtu.sh kselftest configures OVS using ovs-dpctl.py and falls back
to ovs-vsctl only when ovs-dpctl.py fails. However, ovs-dpctl.py exits
with a success status when the installed pyroute2 package version is
lower than 0.6, even though the OVS datapath is not configured.
As a result, pmtu.sh assumes that the setup was successful and
continues running the test, which later fails due to the missing
OVS configuration.
Fix the exit code handling in ovs-dpctl.py so that pmtu.sh can detect
that the setup did not complete successfully and fall back to
ovs-vsctl.
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260306000127.519064-3-aleksey.oladko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305105006.16415-1-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Koichiro Den says:
====================
net: ntb_netdev: Add Multi-queue support
ntb_netdev currently hard-codes a single NTB transport queue pair, which
means the datapath effectively runs as a single-queue netdev regardless
of available CPUs / parallel flows.
The longer-term motivation here is throughput scale-out: allow
ntb_netdev to grow beyond the single-QP bottleneck and make it possible
to spread TX/RX work across multiple queue pairs as link speeds and core
counts keep increasing.
Multi-queue also unlocks the standard networking knobs on top of it. In
particular, once the device exposes multiple TX queues, qdisc/tc can
steer flows/traffic classes into different queues (via
skb->queue_mapping), enabling per-flow/per-class scheduling and QoS in a
familiar way.
Usage
=====
1. Ensure the NTB device you want to use has multiple Memory Windows.
2. modprobe ntb_transport on both sides, if it's not built-in.
3. modprobe ntb_netdev on both sides, if it's not built-in.
4. Use ethtool -L to configure the desired number of queues.
The default number of real (combined) queues is 1.
e.g. ethtool -L eth0 combined 2 # to increase
ethtool -L eth0 combined 1 # to reduce back to 1
Note:
* If the NTB device has only a single Memory Window, ethtool -L eth0
combined N (N > 1) fails with:
"netlink error: No space left on device".
* ethtool -L can be executed while the net_device is up.
Compatibility
=============
The default remains a single queue, so behavior is unchanged unless
the user explicitly increases the number of queues.
Kernel base
===========
ntb-next (latest as of 2026-03-06):
commit 7b3302c687ca ("ntb_hw_amd: Fix incorrect debug message in link
disable path")
Testing / Results
=================
Environment / command line:
- 2x R-Car S4 Spider boards
"Kernel base" (see above) + this series
TCP:
[RC] $ sudo iperf3 -s
[EP] $ sudo iperf3 -Z -c ${SERVER_IP} -l 65480 -w 512M -P 4
UDP:
[RC] $ sudo iperf3 -s
[EP] $ sudo iperf3 -ub0 -c ${SERVER_IP} -l 65480 -w 512M -P 4
Without this series:
TCP / UDP : 589 Mbps / 580 Mbps
With this series (default single queue):
TCP / UDP : 583 Mbps / 583 Mbps
With this series + `ethtool -L eth0 combined 2`:
TCP / UDP : 576 Mbps / 584 Mbps
With this series + `ethtool -L eth0 combined 2` + [1], where flows are
properly distributed across queues:
TCP / UDP : 1.13 Gbps / 1.16 Gbps (re-measured with v3)
The 575~590 Mbps variation is run-to-run variance i.e. no measurable
regression or improvement is observed with a single queue. The key
point is scaling from ~600 Mbps to ~1.20 Gbps once flows are
distributed across multiple queues.
Note: On R-Car S4 Spider, only BAR2 is usable for ntb_transport MW.
For testing, BAR2 was expanded from 1 MiB to 2 MiB and split into two
Memory Windows. A follow-up series is planned to add split BAR support
for vNTB. On platforms where multiple BARs can be used for the
datapath, this series should allow >=2 queues without additional
changes.
[1] [PATCH v2 00/10] NTB: epf: Enable per-doorbell bit handling while keeping legacy offset
https://lore.kernel.org/linux-pci/20260227084955.3184017-1-den@valinux.co.jp/
(subject was accidentally incorrect in the original posting)
====================
Link: https://patch.msgid.link/20260305155639.1885517-1-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
