In mtk_pmic_keys_probe, the regs parameter is only set if the button is
parsed in the device tree. However, on hardware where the button is left
floating, that node will most likely be removed not to enable that
input. In that case the code will try to dereference a null pointer.
Let's use the regs struct instead as it is defined for all supported
platforms. Note that it is ok setting the key reg even if that latter is
disabled as the interrupt won't be enabled anyway.
Fixes: b581acb49a ("Input: mtk-pmic-keys - transfer per-key bit in mtk_pmic_keys_regs")
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The power control function ignores the "on" argument when setting the
report ID, and thus is always sending HID_POWER_SLEEP. This causes a
problem when trying to wakeup.
Fix by sending the state variable, which contains the proper HID_POWER_ON or
HID_POWER_SLEEP based on the "on" argument.
Fixes: 3c98b8dbdc ("Input: cyttsp5 - implement proper sleep and wakeup procedures")
Cc: stable@vger.kernel.org
Signed-off-by: Mikael Gonella-Bolduc <mgonellabolduc@dimonoff.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20250423135243.1261460-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When compile tested with W=1 on x86_64 with driver as built-in:
stmpe-ts.c:371:34: error: unused variable 'stmpe_ts_ids' [-Werror,-Wunused-const-variable]
Ideally this would be referenced from the platform_driver, but since
the compatible string is already matched by the mfd driver for its
parent device, that would break probing.
In this case, the of_device_id table just serves as a module alias
for loading the driver, while the device itself is probed using
the platform device name.
Remove the table and instead use a module alias that reflects how
the driver is actually probed.
Link: https://lore.kernel.org/lkml/20240403080702.3509288-8-arnd@kernel.org/
Link: https://lore.kernel.org/lkml/181dbdb8-c050-4966-8cb4-2f39495ff3f9@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250409122314.2848028-3-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current reset pulse width is measured to be 5us on a
Renesas RZ/G2L SOM. The manufacturer's minimum reset pulse width is
specified as 10us.
Extend reset pulse width to make sure it is long enough on all platforms.
Also reword confusing comments about reset pin assertion.
Fixes: 5b0c03e24a ("Input: Add driver for Cypress Generation 5 touchscreen")
Cc: stable@vger.kernel.org
Acked-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250410184633.1164837-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
GCC 15's new -Wunterminated-string-initialization notices that the
16 character lookup table "nibbles" (which is not used as a C-String)
needs to be marked as "nonstring":
drivers/input/joystick/magellan.c: In function 'magellan_crunch_nibbles':
drivers/input/joystick/magellan.c:51:44: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
51 | static unsigned char nibbles[16] = "0AB3D56GH9:K<MN?";
| ^~~~~~~~~~~~~~~~~~
Add the annotation and While at it, mark the table as const too.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250416174513.work.662-kees@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Haven't authored any commits to that driver in 10 years, and haven't
had supported hardware for nearly as long.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20250307143740.960328-1-hadess@hadess.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current implementation of the goodix_berlin driver lacks support for
revisions A and B of the Berlin IC. This change adds support for the
gt9897 IC, which is a Berlin-A revision part.
The differences between revision D and A are rather minor, a handful of
address changes and a slightly larger read buffer. They were taken from
the driver published by Goodix, which does a few more things that don't
appear to be necessary for the touchscreen to work properly.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250309062315.35720-3-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Document the Goodix GT9897 which is a Berlin-A series touchscreen
controller IC by Goodix.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250309062315.35720-2-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some register groups reserve a byte at the end of their continuous
address space. Depending on the variant of silicon, this field may
share the same memory space as the lower byte of the system status
register (0x10).
In these cases, caching the reserved byte and writing it later may
effectively reset the device depending on what happened in between
the read and write operations.
Solve this problem by avoiding any access to this last byte within
offending register groups. This method replaces a workaround which
attempted to write the reserved byte with up-to-date contents, but
left a small window in which updates by the device could have been
clobbered.
Now that the driver does not touch these reserved bytes, the order
in which the device's registers are written no longer matters, and
they can be written in their natural order. The new method is also
much more generic, and can be more easily extended to new variants
of silicon with different register maps.
As part of this change, the register read and write functions must
be gently updated to support byte access instead of word access.
Fixes: 2e70ef525b ("Input: iqs7222 - acknowledge reset before writing registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z85Alw+d9EHKXx2e@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The property is implemented in the driver but not described in dt-bindings.
Add missing property 'gpio-activelow' to DT schema.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Link: https://lore.kernel.org/r/20250226152843.43932-3-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' into next
Sync up with the mainline.
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
We could not activly retest these devices because we no longer have them in
our archive, but based on the other old Clevo barebones we tested where the
new quirk had the same or a better behaviour I think it would be good to
apply it on these too.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-4-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
While the old quirk combination did not show negative effects on these
devices specifically, the new quirk works just as well and seems more
stable in general.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
The PB71RD keyboard is sometimes laggy after resume and the PC70DR, PB51RF,
P640RE, and PCX0DX_GN20 keyboard is sometimes unresponsive after resume.
This quirk fixes that.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
With the old i8042 quirks this devices keyboard is sometimes laggy after
resume. With the new quirk this issue doesn't happen.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since 'sw_debounce_end_time' of 'struct pm8941_pwrkey' is of type
'ktime_t', use 'ktime_to_us()' to print the value in microseconds
as it is announced in a call to 'dev_dbg()'. Compile tested only.
Fixes: 0b65118e6b ("Input: pm8941-pwrkey - add software key press debouncing support")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Link: https://lore.kernel.org/r/20250216170336.861025-1-dmantipov@yandex.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When SMBUS is disabled, this is never referenced, causing a W=1 warning:
drivers/input/mouse/synaptics.c:164:27: error: 'smbus_pnp_ids' defined but not used [-Werror=unused-const-variable=]
Hide the array behind the same #ifdef as the code referencing it.
Fixes: e839ffab02 ("Input: synaptics - add support for Intertouch devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225145451.1141995-1-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a dependency on ARCH_APPLE and clarify the description to make it
more obvious that this is for ARM machines, not x86 ones.
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250225-z2-kconfig-v1-1-a67d9b778a6c@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The delay is specified in a device property, so the duration can be
arbitrarily large. fsleep() determines the best way of delaying (sleep
vs spin) based on duration.
see Documentation/timers/delay_sleep_functions.rst
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-2-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Matrix keypads with high capacity need a longer settle time after
enabling all columns before re-enabling interrupts. The delay gives
the system time to settle and avoids spurious interrupts.
Add a new optional device property to configure the delay after
enabling all columns. The default is no delay.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-7-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Matrix keypads with high capacity need a longer settle time after
enabling all columns. Add an optional property to specify the settle
time.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-6-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert the gpio-matrix-keypad bindings from text to DT schema.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-4-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250107125844.226466-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The QH controller is actually the controller of the Legion Go S, with
the manufacturer string wch.cn and product name Legion Go S in its
USB descriptor. A cursory lookup of the VID reveals the same.
Therefore, rename the xpad entries to match.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-4-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
TECNO Pocket Go is a kickstarter handheld by manufacturer TECNO Mobile.
It poses a unique feature: it does not have a display. Instead, the
handheld is essentially a pc in a controller. As customary, it has an
xpad endpoint, a keyboard endpoint, and a vendor endpoint for its
vendor software.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-3-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
ZOTAC Gaming Zone is ZOTAC's 2024 handheld release. As it is common
with these handhelds, it uses a hybrid USB device with an xpad
endpoint, a keyboard endpoint, and a vendor-specific endpoint for
RGB control et al.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-2-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As per dt-bindings the property is called vddio-supply, so use the
correct name in the driver instead of iovdd. The datasheet also calls
the supply 'VDDIO'.
Fixes: 44362279bd ("Input: add core support for Goodix Berlin Touchscreen IC")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-2-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the statement above AVDD gets enabled, and not IOVDD, so fix this
copy-paste mistake.
Fixes: 44362279bd ("Input: add core support for Goodix Berlin Touchscreen IC")
Reported-by: Jens Reidel <adrian@travitia.xyz>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-1-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for imagis IST3038H, which seems mostly compatible with
IST3038C except that it reports a different chip ID value.
Tested on samsung,j5y17lte.
Signed-off-by: Andras Sebok <sebokandris2009@gmail.com>
Link: https://lore.kernel.org/r/20250224090354.102903-2-sebokandris2009@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
IST3038H is a touchscreen IC which seems mostly compatible with IST3038C
except that it reports a different chip ID value.
Signed-off-by: Andras Sebok <sebokandris2009@gmail.com>
Link: https://lore.kernel.org/r/20250224090354.102903-4-sebokandris2009@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Revert one cleanup which turned out to eat too much stack space
-----BEGIN PGP SIGNATURE-----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=TO6X
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Revert one cleanup which turned out to eat too much stack space"
* tag 'i2c-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Allocate temporary client dynamically
- Fix AVX-VNNI CPU feature dependency bug triggered via
the 'noxsave' boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=CR8P
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix AVX-VNNI CPU feature dependency bug triggered via the 'noxsave'
boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
* tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs: arch/x86/sva: Fix two grammar errors under Background and FAQ
x86/cpufeatures: Make AVX-VNNI depend on AVX
MAINTAINERS: Change maintainer for RDT
- Fix overly spread-out RSEQ concurrency ID allocation pattern that
regressed certain workloads.
- Fix RSEQ registration syscall behavior on -EFAULT errors when
CONFIG_DEBUG_RSEQ=y. (This debug option is disabled on most
distributions.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=CuyA
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq fixes from Ingo Molnar:
- Fix overly spread-out RSEQ concurrency ID allocation pattern that
regressed certain workloads
- Fix RSEQ registration syscall behavior on -EFAULT errors when
CONFIG_DEBUG_RSEQ=y (This debug option is disabled on most
distributions)
* tag 'sched-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Fix rseq registration with CONFIG_DEBUG_RSEQ
sched: Compact RSEQ concurrency IDs with reduced threads and affinity
- Fix inline asm constraint in cmma_test_essa() to avoid potential ESSA
detection miscompilation
- Fix build failure with CONFIG_GENDWARFKSYMS by disabling purgatory
symbol exports with -D__DISABLE_EXPORTS
- Update defconfigs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAme5DtQACgkQjYWKoQLX
FBidIgf/SVOEoOSCeHHt1M2PXuml55iKpkB6usA7ArVRBfVs2H8FVcI5/b/geQV/
HAa/4BL0dgVtPLse8BAucB+FRYUdWveAAkDcknmxlwYPDvKGCnpXipcQkpPFicIW
gGoLXvh1Rq7gwfhqm1XGSPipvpTHf7JstDpHa+BbUtOElzOFl8XZL8UMqf91GXMn
XEllxtJgUBqHVd//TP99KAgUbaPbLpPxKMX72cuSusAfOyiroG/ft/PwfbQU0BSl
LMZpUpRyDE76lSsAEyc8YAuCMmt0ubY+aYFfO9mvA11bAFTskcaQO2PAq8fhUY4/
Mg604S8m2G44hoW+xKcvX8xN/PWuuA==
=iTtS
-----END PGP SIGNATURE-----
Merge tag 's390-6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix inline asm constraint in cmma_test_essa() to avoid potential ESSA
detection miscompilation
- Fix build failure with CONFIG_GENDWARFKSYMS by disabling purgatory
symbol exports with -D__DISABLE_EXPORTS
- Update defconfigs
* tag 's390-6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix ESSA detection
s390/purgatory: Use -D__DISABLE_EXPORTS
s390: Update defconfigs
Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to ftrace.
The manager ops does not have any callback but calls the sub-ops
callbacks. The manage ops hashes (what is used to tell ftrace what
functions to attach to) is built on the sub-ops it manages.
There was an error in the way it built the hash. An empty hash means to
attach to all functions. When the manager ops had one sub-ops it properly
copied its hash. But when the manager ops had more than one sub-ops, it
went into a loop to make a set of all functions it needed to add to the
hash. If any of the subops hashes was empty, that would mean to attach
to all functions. The error was that the first iteration of the loop
passed in an empty hash to start with in order to add the other hashes.
That starting hash was mistaken as to attach to all functions. This made
the manage ops attach to all functions whenever it had two or more
sub-ops, even if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for that
function will be added to the manager ops for each subops. This causes
waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is attached
to. It also has a counter of how many fprobes are attached. When the last
fprobe is removed, it unregisters the fprobe from ftrace but does not
remove the functions the last fprobe was attached to from the hash. This
leaves the old functions attached. When a new fprobe is added, the fprobe
infrastructure attaches to not only the functions of the new fprobe, but
also to the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes from
zero to one, it attaches its ops to ftrace. When an fprobe is removed, the
counter is decremented. If the counter goes from 1 to zero, it removes the
fprobes ops from ftrace. There was an issue where if two fprobes trace the
same function, the addition of each fprobe would increment the counter.
But when removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not remove
the functions from the ftrace ops. But it also did not decrement the
counter. When the last fprobe is removed, the counter is still one. This
leaves the fprobes callback still registered with ftrace and it being
called by the functions defined by the fprobes ops hash. Worse yet,
because all the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions. Thus, this puts the
state of the system where every function is calling the fprobe callback
handler (which does nothing as there are no registered fprobes), but this
causes a good 13% slow down of the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which added
another layer of preempt disable. As the preempt_count gets traced in the
event, it needs to subtract the amount of preempt disabling the tracer
does to record what the preempt_count was when the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that is
set by the return of the next() function. The start() function allocates
it and the stop() function frees it. But when the last item is found, the
next() returns NULL which leaks the data that was allocated in start().
The m->private is used for something else, so have next() free the data
when it returns NULL, as stop() will then just receive NULL in that case.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ7j6ARQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quFxAQDrO8tjYbhLqg/LMOQyzwn/EF3Jx9ub
87961mA0rKTkYwEAhPNzTZ6GwKyKc4ny/R338KgNY69wWnOK6k/BTxCRmwk=
=TOah
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to
ftrace. The manager ops does not have any callback but calls the
sub-ops callbacks. The manage ops hashes (what is used to tell
ftrace what functions to attach to) is built on the sub-ops it
manages.
There was an error in the way it built the hash. An empty hash
means to attach to all functions. When the manager ops had one
sub-ops it properly copied its hash. But when the manager ops had
more than one sub-ops, it went into a loop to make a set of all
functions it needed to add to the hash. If any of the subops hashes
was empty, that would mean to attach to all functions. The error
was that the first iteration of the loop passed in an empty hash to
start with in order to add the other hashes. That starting hash was
mistaken as to attach to all functions. This made the manage ops
attach to all functions whenever it had two or more sub-ops, even
if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for
that function will be added to the manager ops for each subops.
This causes waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is
attached to. It also has a counter of how many fprobes are
attached. When the last fprobe is removed, it unregisters the
fprobe from ftrace but does not remove the functions the last
fprobe was attached to from the hash. This leaves the old functions
attached. When a new fprobe is added, the fprobe infrastructure
attaches to not only the functions of the new fprobe, but also to
the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes
from zero to one, it attaches its ops to ftrace. When an fprobe is
removed, the counter is decremented. If the counter goes from 1 to
zero, it removes the fprobes ops from ftrace.
There was an issue where if two fprobes trace the same function,
the addition of each fprobe would increment the counter. But when
removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not
remove the functions from the ftrace ops.
But it also did not decrement the counter, so when the last fprobe
is removed, the counter is still one. This leaves the fprobes
callback still registered with ftrace and it being called by the
functions defined by the fprobes ops hash. Worse yet, because all
the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions.
Thus, this puts the state of the system where every function is
calling the fprobe callback handler (which does nothing as there
are no registered fprobes), but this causes a good 13% slow down of
the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which
added another layer of preempt disable. As the preempt_count gets
traced in the event, it needs to subtract the amount of preempt
disabling the tracer does to record what the preempt_count was when
the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that
is set by the return of the next() function. The start() function
allocates it and the stop() function frees it. But when the last
item is found, the next() returns NULL which leaks the data that
was allocated in start(). The m->private is used for something
else, so have next() free the data when it returns NULL, as stop()
will then just receive NULL in that case"
* tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak when reading set_event file
ftrace: Correct preemption accounting for function tracing.
selftests/ftrace: Update fprobe test to check enabled_functions file
fprobe: Fix accounting of when to unregister from function graph
fprobe: Always unregister fgraph function from ops
ftrace: Do not add duplicate entries in subops manager ops
ftrace: Fix accounting of adding subops to a manager ops
drivers/i2c/i2c-core-base.c: In function ‘i2c_detect.isra’:
drivers/i2c/i2c-core-base.c:2544:1: warning: the frame size of 1312 bytes is larger than 1024 bytes [-Wframe-larger-than=]
2544 | }
| ^
Fix this by allocating the temporary client structure dynamically, as it
is a rather large structure (1216 bytes, depending on kernel config).
This is basically a revert of the to-be-fixed commit with some
checkpatch improvements.
Fixes: 735668f8e5 ("i2c: core: Allocate temp client on the stack in i2c_detect")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
[wsa: updated commit message, merged tags from similar patch]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files, addressing
both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes.
-----BEGIN PGP SIGNATURE-----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=z1+P
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files,
addressing both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes"
* tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: loongson: loongson2_guts: Add check for devm_kstrdup()
tee: optee: Fix supplicant wait loop
platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
MAINTAINERS: arm: apple: Add Janne as maintainer
MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
core:
- remove MAINTAINERS entry
cgroup/dmem:
- use correct function for pool descendants
panel:
- fix signal polarity issue jd9365da-h3
nouveau:
- folio handling fix
- config fix
amdxdna:
- fix missing header
xe:
- Fix error handling in xe_irq_install
- Fix devcoredump format
i915:
- Use spin_lock_irqsave() in interruptible context on guc submission
- Fixes on DDI and TRANS programming
- Make sure all planes in use by the joiner have their crtc included
- Fix 128b/132b modeset issues
msm:
- More catalog fixes:
- to skip watchdog programming through top block if its not present
- fix the setting of WB mask to ensure the WB input control is programmed
correctly through ping-pong
- drop lm_pair for sm6150 as that chipset does not have any 3dmerge block
- Fix the mode validation logic for DP/eDP to account for widebus (2ppc)
to allow high clock resolutions
- Fix to disable dither during encoder disable as otherwise this was
causing kms_writeback failure due to resource sharing between
WB and DSI paths as DSI uses dither but WB does not
- Fixes for virtual planes, namely to drop extraneous return and fix
uninitialized variables
- Fix to avoid spill-over of DSC encoder block bits when programming
the bits-per-component
- Fixes in the DSI PHY to protect against concurrent access of
PHY_CMN_CLK_CFG regs between clock and display drivers
- Core/GPU:
- Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout
- Only print GMU fw version once, instead of each time the GPU resumes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAme45ZkACgkQDHTzWXnE
hr65yBAAktcl5lk1UteLZE/3YCOWu9XW3R30Sto9e+CkR/y+2oVSrJFSYF+OWSkV
XRS4xpHkRV3L9YxnroiqIofI6rKoc82pm+HrKZ8Z3gf5gvEU+IB4H8QJdwhUQzcP
8fwxG+ZsCXam6rIUL4kIO9InD1amxJNrFRts+aQ8N/BDeiJdQZOk7F6v9BGu+3hv
HaFPfhXXmh7TYmCQqxoI6hZlEetBYkWFiS+2Ir85Xt6n7V0ae91L+rJK92PBIlmK
sg9xOSMxde3Bxmv8ARn6R3pTaEb2iQfdw203o9P+JnZfJoKEb0IlitCxNJG7Lu4j
hu+7Bk7tPEzncFQA69h5jpn8XL4urECvmkkfx07afj1jjRFFycQgqOkfMM/OiYRo
4cDPi4BhCXwKg4B1KCrx3vGtiUhFc7l4eYyqILRt+U3LpzKtU0ymqSv/odzWz7+m
ynfcAw5DzqozdYD/X8dRkWqEsYyihApJI0I1pj38tem1M1XMtlILjcSWGuGFEPwJ
JIKYsinHRzJ1pggHf3nHzWV7uGFWY8sQwbQVAKTVgL8pq/dQzG3tW7rjLgYLI0ju
hAd2ihXl/h8Ezt4f1dDxrwrTgC3RXL/S0y/g0lBkRjVZ4exMVQVHev+LlLCjcvCY
L6dxZNHb4ggR50qhGekNT2Uxb/Sldu9tVuOGc801eynr6myLLOg=
=cuOi
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-02-22' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull request, lots of small things all over, msm has
a bunch of things but all very small, xe, i915, a fix for the cgroup
dmem controller.
core:
- remove MAINTAINERS entry
cgroup/dmem:
- use correct function for pool descendants
panel:
- fix signal polarity issue jd9365da-h3
nouveau:
- folio handling fix
- config fix
amdxdna:
- fix missing header
xe:
- Fix error handling in xe_irq_install
- Fix devcoredump format
i915:
- Use spin_lock_irqsave() in interruptible context on guc submission
- Fixes on DDI and TRANS programming
- Make sure all planes in use by the joiner have their crtc included
- Fix 128b/132b modeset issues
msm:
- More catalog fixes:
- to skip watchdog programming through top block if its not
present
- fix the setting of WB mask to ensure the WB input control is
programmed correctly through ping-pong
- drop lm_pair for sm6150 as that chipset does not have any
3dmerge block
- Fix the mode validation logic for DP/eDP to account for widebus
(2ppc) to allow high clock resolutions
- Fix to disable dither during encoder disable as otherwise this
was causing kms_writeback failure due to resource sharing
between WB and DSI paths as DSI uses dither but WB does not
- Fixes for virtual planes, namely to drop extraneous return and
fix uninitialized variables
- Fix to avoid spill-over of DSC encoder block bits when
programming the bits-per-component
- Fixes in the DSI PHY to protect against concurrent access of
PHY_CMN_CLK_CFG regs between clock and display drivers
- Core/GPU:
- Fix non-blocking fence wait incorrectly rounding up to 1 jiffy
timeout
- Only print GMU fw version once, instead of each time the GPU
resumes"
* tag 'drm-fixes-2025-02-22' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/i915/dp: Fix disabling the transcoder function in 128b/132b mode
drm/i915/dp: Fix error handling during 128b/132b link training
accel/amdxdna: Add missing include linux/slab.h
MAINTAINERS: Remove myself
drm/nouveau/pmu: Fix gp10b firmware guard
cgroup/dmem: Don't open-code css_for_each_descendant_pre
drm/xe/guc: Fix size_t print format
drm/xe: Make GUC binaries dump consistent with other binaries in devcoredump
drm/i915: Make sure all planes in use by the joiner have their crtc included
drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL
drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro
drm/xe: Fix error handling in xe_irq_install()
drm/i915/gt: Use spin_lock_irqsave() in interruptible context
drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk source
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG1 against clock driver
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG0 updated from driver side
drm/msm/dpu: Drop extraneous return in dpu_crtc_reassign_planes()
drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fields
drm/msm/dpu: Disable dither in phys encoder cleanup
drm/msm/dpu: Fix uninitialized variable
...
-----BEGIN PGP SIGNATURE-----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=L+Lr
-----END PGP SIGNATURE-----
Merge tag 'block-6.14-20250221' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- FC controller state check fixes (Daniel)
- PCI Endpoint fixes (Damien)
- TCP connection failure fixe (Caleb)
- TCP handling C2HTermReq PDU (Maurizio)
- RDMA queue state check (Ruozhu)
- Apple controller fixes (Hector)
- Target crash on disbaled namespace (Hannes)
- MD pull request via Yu:
- Fix queue limits error handling for raid0, raid1 and raid10
- Fix for a NULL pointer deref in request data mapping
- Code cleanup for request merging
* tag 'block-6.14-20250221' of git://git.kernel.dk/linux:
nvme: only allow entering LIVE from CONNECTING state
nvme-fc: rely on state transitions to handle connectivity loss
apple-nvme: Support coprocessors left idle
apple-nvme: Release power domains when probe fails
nvmet: Use enum definitions instead of hardcoded values
nvme: Cleanup the definition of the controller config register fields
nvme/ioctl: add missing space in err message
nvme-tcp: fix connect failure on receiving partial ICResp PDU
nvme: tcp: Fix compilation warning with W=1
nvmet: pci-epf: Avoid RCU stalls under heavy workload
nvmet: pci-epf: Do not uselessly write the CSTS register
nvmet: pci-epf: Correctly initialize CSTS when enabling the controller
nvmet-rdma: recheck queue state is LIVE in state lock in recv done
nvmet: Fix crash when a namespace is disabled
nvme-tcp: add basic support for the C2HTermReq PDU
nvme-pci: quirk Acer FA100 for non-uniqueue identifiers
block: fix NULL pointer dereferenced within __blk_rq_map_sg
block/merge: remove unnecessary min() with UINT_MAX
md/raid*: Fix the set_queue_limits implementations
