Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-10-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-9-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-8-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-7-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-6-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
The pl061_context_save_regs structure is always embedded into struct
pl061 to simplify code, so this brings a tiny 8 bytes memory overhead
for !CONFIG_PM_SLEEP.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-5-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-4-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251124002105.25429-3-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20251124002105.25429-2-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
* Replace min_t() by min() to avoid cutting upper bits and do type checking
gpiolib: acpi: use min() instead of min_t()
-----BEGIN PGP SIGNATURE-----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=JZZc
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.19-1
* Replace min_t() by min() to avoid cutting upper bits and do type checking
gpiolib: acpi: use min() instead of min_t()
Members of struct software_node_ref_args should not be dereferenced
directly but set using the provided macros. Commit d7cdbbc93c
("software node: allow referencing firmware nodes") changed the name of
the software node member and caused a build failure. Remove all direct
dereferences of the ref struct as a fix.
However, this driver also seems to abuse the software node interface by
waiting for a node with an arbitrary name "intel-xhci-usb-sw" to appear
in the system before setting up the reference for the I2C device, while
the actual software node already exists in the intel-xhci-usb-role-switch
module and should be used to set up a static reference. Add a FIXME for
a future improvement.
Fixes: d7cdbbc93c ("software node: allow referencing firmware nodes")
Fixes: 53c24c2932 ("platform/x86: intel_cht_int33fe: use inline reference properties")
Cc: stable@vger.kernel.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20251121111534.7cdbfe5c@canb.auug.org.au/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
* Extend software node implementation, allowing its properties to reference
existing firmware nodes.
* Update the GPIO property interface to use reworked swnode macros.
* Rework reset-gpio code to use GPIO lookup via swnode.
* Fix spi-cs42l43 driver to work with swnode changes.
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCaR878xcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwBu+AQCw1iTmGlzqT+PqEXvWljTZeVDJ
GViCOX5rRSTTyuq8FwEAp6ToNopfJunQ/XQRdKHC0OX/aYtxo3eYI82LG9meSQ8=
=AMsz
-----END PGP SIGNATURE-----
Merge tag 'reset-gpio-for-v6.19' of https://git.pengutronix.de/git/pza/linux into gpio/for-next
Reset/GPIO/swnode changes for v6.19
* Extend software node implementation, allowing its properties to reference
existing firmware nodes.
* Update the GPIO property interface to use reworked swnode macros.
* Rework reset-gpio code to use GPIO lookup via swnode.
* Fix spi-cs42l43 driver to work with swnode changes.
GPIO machine lookup is a nice mechanism for associating GPIOs with
consumers if we don't know what kind of device the GPIO provider is or
when it will become available. However in the case of the reset-gpio, we
are already holding a reference to the device and so can reference its
firmware node. Let's setup a software node that references the relevant
GPIO and attach it to the auxiliary device we're creating.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
As the reset-gpio devices are purely virtual and never instantiated from
real firmware nodes, let's convert the driver to using the - more
fitting - auxiliary bus.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Auxiliary devices really do need a parent so ahead of converting the
reset-gpios driver to registering on the auxiliary bus, make the GPIO
device that provides the reset GPIO the parent of the reset-gpio device.
To that end move the lookup of the GPIO device by fwnode to the
beginning of __reset_add_reset_gpio_device() which has the added benefit
of bailing out earlier, before allocating resources for the virtual
device, if the chip is not up yet.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
For better readability and easier maintenance order the includes
alphabetically.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
When doing a software node lookup, we require both the fwnode that
references a GPIO chip as well as the node associated with that chip to
be software nodes. However, we now allow referencing generic firmware
nodes from software nodes in driver core so we should allow the same in
GPIO core. Make the software node name check optional and dependent on
whether the referenced firmware node is a software node. If it's not,
just continue with the lookup.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On some systems the cs42l43 has amplifiers attached to its SPI
controller that are not properly defined in ACPI. Currently
software nodes are added to support this case, however, the chip
selects for these devices are specified using a hack. A software
node is added with the same name as the pinctrl driver, as the
look up was name based, this allowed the GPIO look up to return
the pinctrl driver even though the swnode was not owned by it.
This was necessary as the swnodes did not support directly
linking to real firmware nodes.
Since commit e5d527be7e ("gpio: swnode: don't use the swnode's
name as the key for GPIO lookup") changed the lookup to be
fwnode based this hack will no longer find the pinctrl driver,
resulting in the driver not probing. There is no pinctrl driver
attached to the swnode itself. But other patches did add support
for linking a swnode to a real fwnode node [1]. As such the hack
is no longer needed, so switch over to just passing the real
fwnode for the pinctrl property to avoid any issues.
[Bartosz:
- remove unneeded Fixes: tag,
- use PROPERTY_ENTRY_REF_ARRAY() instead of PROPERTY_ENTRY_REF_ARRAY_LEN()]
Link: https://lore.kernel.org/linux-gpio/20251106-reset-gpios-swnodes-v6-0-69aa852de9e4@linaro.org/ [1]
Fixes: 439fbc9750 ("spi: cs42l43: Add bridged cs35l56 amplifiers")
Cc: stable+noautosel@kernel.org # Don't backport, previous approach works, fix relies on swnode changes
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
At the moment software nodes can only reference other software nodes.
This is a limitation for devices created, for instance, on the auxiliary
bus with a dynamic software node attached which cannot reference devices
the firmware node of which is "real" (as an OF node or otherwise).
Make it possible for a software node to reference all firmware nodes in
addition to static software nodes. To that end: add a second pointer to
struct software_node_ref_args of type struct fwnode_handle. The core
swnode code will first check the swnode pointer and if it's NULL, it
will assume the fwnode pointer should be set.
Software node graphs remain the same, as in: the remote endpoints still
have to be software nodes.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Once we allow software nodes to reference other kinds of firmware nodes,
the node in args will no longer necessarily be a software node so bump
its reference count using its fwnode interface.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Once we allow software nodes to reference all kinds of firmware nodes,
the refnode here will no longer necessarily be a software node so read
its proprties going through its fwnode implementation.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Currently, during suspend, do nothing; during resume, just sync the
regmap cache to hw regs.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20251119140455.10096-1-jszhang@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The 16Z034 and 16Z037 are 8 bits GPIO controllers that share the
same registers and features of the 16Z127 GPIO controller.
Signed-off-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251118083115.9545-1-dev-josejavier.rodriguez@duagon.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
min_t(u16, a, b) casts an 'unsigned long' to 'u16'.
Use min(a, b) instead as it promotes the both values to int
and so cannot discard significant bits.
In this case the values should be ok.
Detected by an extra check added to min_t().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since PCI device should not be abusing platform device, MFD parent to
platform child path is no longer being pursued for this driver. Convert
it to auxiliary driver, which will be used by EHL PSE auxiliary device.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20251112034040.457801-3-raag.jadav@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Intel Elkhart Lake Programmable Service Engine (PSE) includes two PCI
devices that expose two different capabilities of GPIO and Timed I/O
as a single PCI function through shared MMIO with below layout.
GPIO: 0x0000 - 0x1000
TIO: 0x1000 - 0x2000
This driver enumerates the PCI parent device and creates auxiliary child
devices for these capabilities. The actual functionalities are provided
by their respective auxiliary drivers.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20251112034040.457801-2-raag.jadav@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
I went through all the datasheets and created this note listing
chip functions and register layouts.
Signed-off-by: Levente Révész <levente.revesz@eilabs.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20251112224924.2091880-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
On Tegra410, Compute and System GPIOs have same port names. This
results in the same GPIO names for both Compute and System GPIOs
during initialization in `tegra186_gpio_probe()`, which results in
following warnings:
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.00'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.01'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.02'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PB.00'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PB.01'
...
Add GPIO name prefix in the SoC data and use it to initialize the GPIO
name.
Port names remain unchanged for previous SoCs. On Tegra410, Compute
GPIOs are named COMPUTE-P<PORT>.GPIO, and System GPIOs are named
SYSTEM-P<PORT>.GPIO.
Fixes: 9631a10083 ("gpio: tegra186: Add support for Tegra410")
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20251113163112.885900-1-kkartik@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Allow to kill devm_gpio_request_one() independently by converting it
to use legacy APIs that will be alive a bit longer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251112093608.1481030-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make sure we kill gpio_request_one() first by converting it to
use legacy APIs that will be alive a bit longer. In particular,
this also shows the code we will use in another function to make
it die independently.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251112093608.1481030-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add better support for GPIOs shared by multiple consumers.
-----BEGIN PGP SIGNATURE-----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=fa8j
-----END PGP SIGNATURE-----
Merge tag 'gpio/shared-gpios-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git into gpio/for-next
Immutable branch between the GPIO, ASoC and regulator trees for v6.19-rc1
Add better support for GPIOs shared by multiple consumers.
Some qualcomm platforms use shared GPIOs. Enable support for them by
selecting the Kconfig switch provided by GPIOLIB.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-7-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Provide an interface allowing consumers to check if a GPIO descriptor
represents a GPIO that can potentially be shared by multiple consumers
at the same time. This is exposed to allow subsystems that already
work around the limitations of the current non-exclusive GPIO handling
in some ways, to gradually convert to relying on the new shared GPIO
feature of GPIOLIB.
Extend the gpiolib-shared module to mark the GPIO shared proxy
descriptors with a flag checked by the new interface.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-6-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As the final step in adding official support for shared GPIOs, enable
the previously added elements in core GPIO subsystem code. Set-up shared
GPIOs when adding a GPIO chip, tear it down on removal and check if a
GPIO descriptor looked up during the firmware-node stage is shared and
fall-back to machine lookup in this case.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-5-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add a virtual GPIO proxy driver which arbitrates access to a single
shared GPIO by multiple users. It works together with the core shared
GPIO support from GPIOLIB and functions by acquiring a reference to a
shared GPIO descriptor exposed by gpiolib-shared and making sure that
the state of the GPIO stays consistent.
In general: if there's only one user at the moment: allow it to do
anything as if this was a normal GPIO (in essence: just propagate calls
to the underlying real hardware driver). If there are more users: don't
allow to change the direction set by the initial user, allow to change
configuration options but warn about possible conflicts and finally:
treat the output-high value as a reference counted, logical "GPIO
enabled" setting, meaning: the GPIO value is set to high when the first
user requests it to be high and back to low once the last user stops
"voting" for high.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-4-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This module scans the device tree (for now only OF nodes are supported
but care is taken to make other fwnode implementations easy to
integrate) and determines which GPIO lines are shared by multiple users.
It stores that information in memory. When the GPIO chip exposing shared
lines is registered, the shared GPIO descriptors it exposes are marked
as shared and virtual "proxy" devices that mediate access to the shared
lines are created. When a consumer of a shared GPIO looks it up, its
fwnode lookup is redirected to a just-in-time machine lookup that points
to this proxy device.
This code can be compiled out on platforms which don't use shared GPIOs.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-3-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Define a new GPIO descriptor flag for marking pins that are shared by
multiple consumer. This flag will be used in several places so we need
to do it in advance and separately from other changes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-2-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Implement a function for checking if a string ends with a different
string and add its kunit test cases.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-1-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Two reverts merged into one commit to handle a regression caused by a
wrong cleanup because the underlying implications were unclear.
-----BEGIN PGP SIGNATURE-----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=BbUf
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Two reverts merged into one commit to handle a regression caused by a
wrong cleanup because the underlying implications were unclear"
* tag 'i2c-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: muxes: pca954x: Fix broken reset-gpio usage
- Strip trailing padding bytes from modules.builtin.modinfo to fix error
during modules_install with certain versions of kmod
- Drop unused static inline function warning in .c files with clang from
W=1 to W=2
- Ensure kernel-doc.py invocations use the PYTHON3 make variable to
ensure user's choice of Python interpreter is always respected
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaRABuwAKCRAdayaRccAa
lpyDAQCiCQkpyG1JU2uKOaDTItA7BzK6iuCuqoePk0um+rIUKwEAq8fYCJU7kDM2
N+uL8Gw03vryftPYMVcfdrO0WsCBwgM=
=D8C8
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Strip trailing padding bytes from modules.builtin.modinfo to fix
error during modules_install with certain versions of kmod
- Drop unused static inline function warning in .c files with clang
from W=1 to W=2
- Ensure kernel-doc.py invocations use the PYTHON3 make variable to
ensure user's choice of Python interpreter is always respected
* tag 'kbuild-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Let kernel-doc.py use PYTHON3 override
compiler_types: Move unused static inline functions warning to W=2
kbuild: Strip trailing padding bytes from modules.builtin.modinfo
It is possible to force a specific version of python to be used when
building the kernel by passing PYTHON3= on the make command line.
However kernel-doc.py is currently called with python3 hard-coded and
thus ignores this setting.
Use $(PYTHON3) to run $(KERNELDOC) so that the desired version of
python is used.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://patch.msgid.link/20251107192933.2bfe9e57@endymion
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
nouveau:
- revert DMA mask change
-----BEGIN PGP SIGNATURE-----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=gRi+
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-11-09' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fix from Dave Airlie:
"Brown paper bag, the dma mask fix which I applied and actually looked
through for bad things, actually broke newer GPUs, there might be some
latent part in the boot path that is assuming 32-bit still, but we
will figure that out elsewhere.
nouveau:
- revert DMA mask change"
* tag 'drm-fixes-2025-11-09' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/nouveau: set DMA mask before creating the flush page"
