In OS-Initiated mode of PSCI, a serialization is established in Linux
between the last CPU powering down the cluster / domain and the CPU
powering up back. The serialization is established by the genpd
framework and therefore it doesn't help to lock around the cache.
Refactor out the core of the flush functionality from the locking
wrappers. Calling the core functionality avoids a spin trylock, which
the RCU framework might consider suspicious under the circumstances.
Change-Id: I242fb4827b71152bda36ea5870393054b8703309
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
RSC is part the CPU subsystem and powers off the CPU domains when all
the CPUs and no RPMH transactions are pending from any of the drivers.
The RSC needs to flush the 'sleep' and 'wake' votes that are critical
for saving power when all the CPUs are in idle. Doing this every time a
CPU powers down, increases latency to enter idle state. So, we want to
do this, only when it makes sense - when the last CPU is powering down.
Let's make RSC part of the CPU PM domains, by attaching it to the
cluster PD (defined in DT). Registering for PM domain notifications, RSC
driver can be notified that the last CPU is powering down. When the last
CPU is powering down the domain, let's flush the 'sleep' and 'wake'
votes that are stored in the data buffers into the hardware.
Change-Id: Id748413f0f86a4ac73c37e0780b2b22a143a1e61
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
lockdep_assert_irqs_disabled() was added to check rpmh_flush() can
only be invoked when irqs are disabled, this is true for APPS RSC
as the last CPU going to deepest low power mode is writing sleep and
wake TCSes.
However for Display RSC, drivers can invoke rpmh_write_sleep_and_wake()
to immediately write cached sleep and wake sets to TCSes from any CPU.
Conditionally check if RSC controller supports solver mode then do not
check for irqs disabled as such RSC can write sleep and wake TCSes at any
point.
Change-Id: I8ad05cd81af15a0d57353b55d8098cf0e47f79f7
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Let clients call rpmh_write_sleep_and_wake() to immediately
write cached sleep and wake data to the TCSes.
Change-Id: I04a94ee622a39a0aa0e829f4c40190a870fb2fb1
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Allow RPMH requests to succeed even when the always-On subsystem is not
available. In standalone mode, requests are never sent to the TCS
mailbox driver. The command DB provides the information to make the
decision to run in standalone mode or not.
Change-Id: Ia2bc5024da0d7e6607347b1a481b2feb9584059a
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Controllers may be in 'solver' state, where they could be in autonomous
mode executing low power modes for their hardware and as such are not
available for sending active votes. Device driver may notify RPMH API
that the controller is in solver mode and when in such mode, disallow
requests from platform drivers for state change using the RSC.
Change-Id: Ibe777d23fd58489cfb8132c0168af8e29284084d
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Output the TCS state when the debug api is invoked. The state of the
TCS, the contents and the IRQ status is presented. Additionally, crash
the system if any TCS is busy to help with the debug.
Change-Id: I7ef5480cc6da7208d5f82351d863561fcc1abf68
Signed-off-by: Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Add symbols currently present on kalama as of msm-5.15
'commit 1701298d2205 ("Merge "defconfig:kalama_consolidate: Enable
CONFIG_UFS_DBG"").
Change-Id: Ie9570f48bbcef1c32e49f629e079cf7af0f572a9
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Place initial votes for BCMs marked as keepalive during initialization
such that we force the BCMs on even in the absence of explicit client
votes.
Change-Id: I0cf1b2f2a76d5fc094329520ce2a9f1691a3f681
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Some BCMs only need to be kept alive early in the boot process. Add the
keepalive_early flag, which only prevents them from turning off before
the sync_state callback.
Change-Id: I0699fb0420d1d9f9473e28ede57380fd5b08ca53
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Currently the initial floor is only voted in AMC/WAKE, which means the
floor is removed when entering the sleep set. However, some use cases
require bus BW even when the CPU is idle. If all clients haven't voted
yet, then assume we need to keep these votes around permanently.
Change-Id: I2277e62e0a4e1ea949f1c7fbad052e76cf451c68
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Some QoS enable urgent forwarding by default, but we don't always want
this. So don't assume the register already has zero and write it
unconditionally.
Change-Id: I257e099a588870f8d6e6d68b7fd794e22781450e
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Add prio_fwd_disable flag support to stop forwarding QoS information
from the master. So respective noc will ignore master's claimed priority
and send out the default priortiy.
Change-Id: I21ca11b44f200453c70c02f195779ef583a90e8c
Signed-off-by: Vivek Aknurwar <quic_viveka@quicinc.com>
Skip bcm init and implement stubs for icc apis when stub property
is defined.
Change-Id: Ic56a75578b6fa4fe35bebaf103d41205e444efed
Signed-off-by: Vivek Aknurwar <viveka@codeaurora.org>
Some QoS blocks require voting for BCMs before their registers can be
accessed, since they require clocks and regulators controlled by BCM.
Hence add qos_proxy flag to indicate the BCM needs to be voted for
QoS configuration.
Change-Id: Idc618e7a3d28d31d38d85f5b21e6b9f12e86ebe2
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Add support for QCOM_ICC_TAG_PERF_MODE on RPMh architectures. When
QCOM_ICC_TAG_PERF_MODE is specified using icc_set_tag(), each node in
the requested path will use latency-optimized settings if supported by
the node. The improved latency comes at the cost of higher power.
Change-Id: I83c52e5677f8842b4c17987053d566971b84086f
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Using devm_ioremap_resource will check the resource boundaries.
In legacy hardwares we have memory overlaps between the noc devices.
Hence use devm_ioremap instead of devm_ioremap_resource.
Change-Id: Ifc8a1bb60183058a7c3845c231edfa53115d817e
Signed-off-by: Veera Vegivada <quic_vvegivad@quicinc.com>
Add binding for QCOM_ICC_TAG_PERF_MODE, which can be used with
icc_set_tag() to indicate that the path should use latency-optimized
settings for each node in the path if supported.
Change-Id: I748df7bdaa79784ade4ad9a135e4f91b92b97513
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Add skip-qos node property to skip qos settings which happens on
each provider probe. Early in presil this property is useful to skip
qos settings as not all needed clocks are voted/set on and device ends
up unclocked access. This property will help to deliver interconnect
earlier without qos settings which can be enabled when things are ready
before bring up.
Change-Id: I9619f651f40f49ec03d9ea0dc7c45b3b13ffae6c
Signed-off-by: Vivek Aknurwar <viveka@codeaurora.org>
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Some BCMs aren't directly associated with the data path (i.e. ACV) and
therefore don't communicate using BW. Instead, they are simply
enabled/disabled with a simple bit mask. Add support for these.
Change-Id: I9b73e0ce05a09338d22571ff311c5b058fb8e1b2
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Some QoS blocks require voting for BCMs before their registers can be
accessed, since they require clocks and regulators controlled by BCM.
Vote for these BCMs before configuring QoS during probe.
Change-Id: Ic93d224c7dc56c8e56d527179a0c2d1e888e3822
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Some BCMs that aren't directly associated with NOC ports (i.e. ACV)
publish their width as 0 in cmd_db. The client votes are multiplied by
this width when adjusting for node/BCM width differences. This means a
zero width also zeroes the client votes, making it impossible to vote on
these zero-width BCMs. Set a width floor of 1 to allow aggregation on
these nodes.
Also set a floor on the BCM units. They should never by 0 in cmd_db, but
if they are it would cause a div-by-zero.
Change-Id: I14ba89411ec02077db6d2c27b6de932c5b7dfe1e
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Currently avg and peak bandwidth are voted as allowed max on kernel boot.
Add stub icc_get_bw() callback that return default avg, peak bandwidth.
Change-Id: I5c42f933d770e2c63c8bbc2d8e7afe5b9748ba1d
Signed-off-by: Vivek Aknurwar <viveka@codeaurora.org>
Add a debug library that provides QCOM-specific interconnect debug
features. This includes support for printing all enabled interconnect
votes to console when entering suspend.
Change-Id: I61302f95c94176f833bd1c88ddc76b88121b3f79
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Add stub icc_set() and icc_aggregate() callbacks that return success
without doing anything. These can be used early in development before
the rest of the system is ready to service RPMh requests. Additionally,
they can be used during probe to avoid unnecessary set/aggregate() calls
each time icc_node_add() is called.
Change-Id: If495ffc8f9839c3d2651c166c62a7936927e3c02
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
AMC requests made while the RSC is in solver mode result in a -EBUSY
response from the rpmh driver. This is expected and is a non-issue since
in this case we just need the request to apply to the WAKE set instead.
It's only possible to see this for secondary RSCs like the Display RSC,
since the primary Apps RSC will only be in solver during the power
collapse/restore sequences while SW isn't running. Ignore -EBUSY so we
don't return an error and short-circuit before sending the necessary
WAKE/SLEEP requests.
Change-Id: Id34b91c6e46d282be2522434d3c2b4837291b3b7
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Add support for targeting alternate bcm-voters which
live under different RSC devices.
Change-Id: Ia1ad8a4c6c6b8531f0dae67cc7b22e2faa55c418
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Signed-off-by: Georgi Djakov <gdjako@codeaurora.org>
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Introduce support to initialize QoS settings for
QNOC platforms.
Change-Id: I17a237e88f21f7bbc98621d072fff9c1b1bc6403
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Add sync_state functionality to remove threshold held during initial
boot up and clean up any linger proxy resources that were voted for
from bootloaders.
Change-Id: Ib2fe3f3e54775b85c3ee8107c9aafdcd32841017
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Add a high bandwidth vote for critical NoCs during boot up.
Change-Id: I739df67083e13f542c0021054b1ca4c1f2d9bd09
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Add the required APIs utilized by the USB drivers to the ABI symbol list.
Change-Id: I9797ab4e71438c4ddbb9f06fc3c2e3dbb91acb5e
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Take a snapshot of our DMA-BUF heap driver as of commit f843a80d2c45
("Merge "defconfig: gen3auto: Separated if_changed"") on msm-5.15.
On top of taking the snapshot, make the following changes:
- Remove the references to the deferred free helper, which will be
added later.
- Remove the references to the pool size getters, which will be
added later.
- Add the deferred mapping driver.
- Remove the heap helper buffer, and associated headers / inclusions
(these are unused).
- Remove the bitstream contig heap as this is no longer required.
Change-Id: Ib98b08139d11940f4f0030294c6c7c18897f6531
Signed-off-by: Chris Goldsworthy <quic_cgoldswo@quicinc.com>
Take a snapshot of the qcom-dma-mapping.h header as of commit
f843a80d2c45 ("Merge "defconfig: gen3auto: Separated if_changed"") on
msm-5.15, excluding any Gunyah references (as the Gunyah driver has
yet to be ported).
Change-Id: I0549feb28eedb80668f1233576c365aefc3a8e6e
Signed-off-by: Chris Goldsworthy <quic_cgoldswo@quicinc.com>
