In mvpp2_ethtool_cls_rule_ins(), the ethtool_rule is allocated by
ethtool_rx_flow_rule_create(). If the subsequent conversion to flow
type fails, the function jumps to the clean_rule label.
However, the clean_rule label only frees efs, skipping the cleanup
of ethtool_rule, which leads to a memory leak.
Fix this by jumping to the clean_eth_rule label, which properly calls
ethtool_rx_flow_rule_destroy() before freeing efs.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: f4f1ba1819 ("net: mvpp2: cls: Report an error for unsupported flow types")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260123065716.2248324-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since cited commit, core locks the net_device's rss_lock when handling
ethtool -x command, so driver's implementation should not lock it
again. Remove the latter.
Fixes: 040cef30b5 ("net: ethtool: move get_rxfh callback under the rss_lock")
Reported-by: Damir Mansurov <damir.mansurov@oktetlabs.ru>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1126015
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260123161634.1215006-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmlzrWoTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnLwLCAC2T9y0HX73ALx8NJ9fmWJIxdR/Ml29
2xw837GirA6EWlkx60UJARhFNNEMP5OZw293DMlQ4MsW4cMfUZfwq66tZJ50PA+8
jfxC7eE7VED6yQxyvWSb222Rh8Y+l7Wk9/K1Vw9Gd0llFLqvmlGLIWRJfCAdy0wz
OdcJWwsmY0XIb4dcTfhOskuUe2i6EVLiaIUS8I1Jl4jXegBrLfzc3Rwda0hr33qM
lkZBx/j4/eRp5qqYw9yOvsiZtwNNqhwVzUe3rf6fiiu/Dse0QuTBVTVP5SpNE8bg
D/psUBqGJa9z5WD5nuHgKp0HdizXPt2SmjzfQU+z23w8QLu8+8w2eM2+
=AWbF
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.19-20260123' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-01-23
The first patch is by Zilin Guan and fixes a memory leak in the error
path of the at91_can driver's probe function.
The last patch is by me and fixes yet another error in the gs_usb's
gs_usb_receive_bulk_callback() function.
* tag 'linux-can-fixes-for-6.19-20260123' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: gs_usb: gs_usb_receive_bulk_callback(): fix error message
can: at91_can: Fix memory leak in at91_can_probe()
====================
Link: https://patch.msgid.link/20260123173241.1026226-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In octep_device_setup(), if octep_ctrl_net_init() fails, the function
returns directly without unmapping the mapped resources and freeing the
allocated configuration memory.
Fix this by jumping to the unsupported_dev label, which performs the
necessary cleanup. This aligns with the error handling logic of other
paths in this function.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 577f0d1b1c ("octeon_ep: add separate mailbox command and response queues")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260121130551.3717090-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are not deregistering the fixed phy link when hitting the early
exit condition. Add the correct early exit sequence.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260122194001.1098859-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sinc commit 79a6d1bfe1 ("can: gs_usb: gs_usb_receive_bulk_callback():
unanchor URL on usb_submit_urb() error") a failing resubmit URB will print
an info message.
In the case of a short read where netdev has not yet been assigned,
initialize as NULL to avoid dereferencing an undefined value. Also report
the error value of the failed resubmit.
Fixes: 79a6d1bfe1 ("can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260119181904.1209979-1-kuba@kernel.org/
Link: https://patch.msgid.link/20260120-gs_usb-fix-error-message-v1-1-6be04de572bc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In esw_acl_ingress_lgcy_setup(), if esw_acl_table_create() fails,
the function returns directly without releasing the previously
created counter, leading to a memory leak.
Fix this by jumping to the out label instead of returning directly,
which aligns with the error handling logic of other paths in this
function.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 07bab95026 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260120134640.2717808-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures
are not freed after being removed from the pending list.
Commit 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs") replaced
mgmt_pending_foreach() calls with individual command handling but missed
adding mgmt_pending_free() calls in both error and success paths of
set_ssp_complete(). Other completion functions like set_le_complete()
were fixed correctly in the same commit.
This causes a memory leak of the mgmt_pending_cmd structure and its
associated parameter data for each SSP command that completes.
Add the missing mgmt_pending_free(cmd) calls in both code paths to fix
the memory leak. Also fix the same issue in set_advertising_complete().
Fixes: 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_uart_set_proto() sets HCI_UART_PROTO_INIT before calling
hci_uart_register_dev(), which calls proto->open() to initialize
hu->priv. However, if a TTY write wakeup occurs during this window,
hci_uart_tx_wakeup() may schedule write_work before hu->priv is
initialized, leading to a NULL pointer dereference in
hci_uart_write_work() when proto->dequeue() accesses hu->priv.
The race condition is:
CPU0 CPU1
---- ----
hci_uart_set_proto()
set_bit(HCI_UART_PROTO_INIT)
hci_uart_register_dev()
tty write wakeup
hci_uart_tty_wakeup()
hci_uart_tx_wakeup()
schedule_work(&hu->write_work)
proto->open(hu)
// initializes hu->priv
hci_uart_write_work()
hci_uart_dequeue()
proto->dequeue(hu)
// accesses hu->priv (NULL!)
Fix this by moving set_bit(HCI_UART_PROTO_INIT) after proto->open()
succeeds, ensuring hu->priv is initialized before any work can be
scheduled.
Fixes: 5df5dafc17 ("Bluetooth: hci_uart: Fix another race during initialization")
Link: https://lore.kernel.org/linux-bluetooth/6969764f.170a0220.2b9fc4.35a7@mx.google.com/
Signed-off-by: Jia-Hong Su <s11242586@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pretty big PR, but hard to make up any cohesive story that would
explain it, a random collection of fixes. The two reverts of bad
patches from this release here feel like stuff that'd normally
show up by rc5 or rc6. Perhaps obvious thing to say, given the MW
timing.
That said, no active investigations / regressions. Let's see what
the next week brings.
Current release - fix to a fix:
- can: alloc_candev_mqs(): add missing default CAN capabilities
Current release - regressions:
- usbnet: fix crash due to missing BQL accounting after resume
- Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not ...
Previous releases - regressions:
- Revert "nfc/nci: Add the inconsistency check between the input ...
Previous releases - always broken:
- number of driver fixes for incorrect use of seqlocks on stats
- rxrpc: fix recvmsg() unconditional requeue, don't corrupt rcv queue
when MSG_PEEK was set
- ipvlan: make the addrs_lock be per port avoid races in the port
hash table
- sched: enforce that teql can only be used as root qdisc
- virtio: coalesce only linear skb
- wifi: ath12k: fix dead lock while flushing management frames
- eth: igc: reduce TSN TX packet buffer from 7KB to 5KB per queue
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmlyVNQACgkQMUZtbf5S
IrvoMQ/+N+KikpNLtHFpkqKAsTnNC6gR9yG+NYvUck1Oo+CQQpc/wJ78pS2cyPpM
siMa7lLzRuCKPYni3RVpG9nqG/jv9HKvFXpgpSb71Evs6syO85kI8Dy4z8G4mClk
A4QFH6/8V4uZpH/ewy9DTIjxdWPEJA6CuXXnmolTEBhrNkgskv0Sz3jFVTxDjFzN
xTMk6H2PhgANUsYFree9PQ+gR+QAHKHPvjobWCsepYRHlT4YVi8PrmqoYBvycLwa
Q//xy6PUOSXZM4sa6YSUMZk2Nou/84BvqouQ05ljaLSZDl4Ecfxl5MDkh/kzZHjR
wPbMhiZUrJngwwyXQWcSnir1M17IPKjC/FAEDFUFVWDT/wYYHODt9npCRpdglsa5
SGoy0yDgUN5Lq9Q5dPL0PMLHVLkuDdlzmyva4uso/dQYovXgTi/5Kx2bPc6LLqMJ
CP5QxjN5OsOHKnGdI/UO28OU5Yn2KRCmJiW9nW3XdxR316lkmo6BWHAxWG9XhbJE
aCBXu3EoqNSDVuWaZFVQ8g2uTN3uOhnuJqBllhahtENbdqjsat0cxcjYTuUDvuMm
B1W0My5qq7O6TRjlFl6JfC3k2gqbZ+HlLg3LfmC74bmddOL52up+9HKyeRoWiIaA
9BQ3DKpjD3VFEbsbBVPfoZ4Ch4jrB+G+ck8f7g/l9BCNM+Ji1Ds=
=Ehzr
-----END PGP SIGNATURE-----
Merge tag 'net-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN and wireless.
Pretty big, but hard to make up any cohesive story that would explain
it, a random collection of fixes. The two reverts of bad patches from
this release here feel like stuff that'd normally show up by rc5 or
rc6. Perhaps obvious thing to say, given the holiday timing.
That said, no active investigations / regressions. Let's see what the
next week brings.
Current release - fix to a fix:
- can: alloc_candev_mqs(): add missing default CAN capabilities
Current release - regressions:
- usbnet: fix crash due to missing BQL accounting after resume
- Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not ...
Previous releases - regressions:
- Revert "nfc/nci: Add the inconsistency check between the input ...
Previous releases - always broken:
- number of driver fixes for incorrect use of seqlocks on stats
- rxrpc: fix recvmsg() unconditional requeue, don't corrupt rcv queue
when MSG_PEEK was set
- ipvlan: make the addrs_lock be per port avoid races in the port
hash table
- sched: enforce that teql can only be used as root qdisc
- virtio: coalesce only linear skb
- wifi: ath12k: fix dead lock while flushing management frames
- eth: igc: reduce TSN TX packet buffer from 7KB to 5KB per queue"
* tag 'net-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
Octeontx2-af: Add proper checks for fwdata
dpll: Prevent duplicate registrations
net/sched: act_ife: avoid possible NULL deref
hinic3: Fix netif_queue_set_napi queue_index input parameter error
vsock/test: add stream TX credit bounds test
vsock/virtio: cap TX credit to local buffer size
vsock/test: fix seqpacket message bounds test
vsock/virtio: fix potential underflow in virtio_transport_get_credit()
net: fec: account for VLAN header in frame length calculations
net: openvswitch: fix data race in ovs_vport_get_upcall_stats
octeontx2-af: Fix error handling
net: pcs: pcs-mtk-lynxi: report in-band capability for 2500Base-X
rxrpc: Fix data-race warning and potential load/store tearing
net: dsa: fix off-by-one in maximum bridge ID determination
net: bcmasp: Fix network filter wake for asp-3.0
bonding: provide a net pointer to __skb_flow_dissect()
selftests: net: amt: wait longer for connection before sending packets
be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list
Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not-at-end warning"
netrom: fix double-free in nr_route_frame()
...
- Fix race condition leading to null pointer dereference on ThinkPad
-----BEGIN PGP SIGNATURE-----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=RjDN
-----END PGP SIGNATURE-----
Merge tag 'leds-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED fix from Lee Jones:
- Fix race condition leading to null pointer dereference on ThinkPad
* tag 'leds-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
leds: led-class: Only Add LED to leds_list when it is fully ready
Modify the internal registration helpers dpll_xa_ref_{dpll,pin}_add()
to reject duplicate registration attempts.
Previously, if a caller attempted to register the same pin multiple
times (with the same ops, priv, and cookie) on the same device, the core
silently increments the reference count and return success. This behavior
is incorrect because if the caller makes these duplicate registrations
then for the first one dpll_pin_registration is allocated and for others
the associated dpll_pin_ref.refcount is incremented. During the first
unregistration the associated dpll_pin_registration is freed and for
others WARN is fired.
Fix this by updating the logic to return `-EEXIST` if a matching
registration is found to enforce a strict "register once" policy.
Fixes: 9431063ad3 ("dpll: core: Add DPLL framework base functions")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260121130012.112606-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Incorrectly transmitted interrupt number instead of queue number
when using netif_queue_set_napi. Besides, move this to appropriate
code location to set napi.
Remove redundant netif_stop_subqueue beacuase it is not part of the
hinic3_send_one_skb process.
Fixes: 17fcb3dc12 ("hinic3: module initialization and tx/rx logic")
Co-developed-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Link: https://patch.msgid.link/7b8e4eb5c53cbd873ee9aaefeb3d9dbbaff52deb.1769070766.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In at91_can_probe(), the dev structure is allocated via alloc_candev().
However, if the subsequent call to devm_phy_optional_get() fails, the
code jumps directly to exit_iounmap, missing the call to free_candev().
This results in a memory leak of the allocated net_device structure.
Fix this by jumping to the exit_free label instead, which ensures that
free_candev() is called to properly release the memory.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 3ecc09856a ("can: at91_can: add CAN transceiver support")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20260122114128.643752-1-zilin@seu.edu.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- various small fixes for ath10k/ath12k/mwifiex/rsi
- cfg80211 fix for HE bitrate overflow
- mac80211 fixes
- S1G beacon handling in scan
- skb tailroom handling for HW encryption
- CSA fix for multi-link
- handling of disabled links during association
-----BEGIN PGP SIGNATURE-----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=njuT
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-11-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Another set of updates:
- various small fixes for ath10k/ath12k/mwifiex/rsi
- cfg80211 fix for HE bitrate overflow
- mac80211 fixes
- S1G beacon handling in scan
- skb tailroom handling for HW encryption
- CSA fix for multi-link
- handling of disabled links during association
* tag 'wireless-2026-11-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: ignore link disabled flag from userspace
wifi: mac80211: apply advertised TTLM from association response
wifi: mac80211: parse all TTLM entries
wifi: mac80211: don't increment crypto_tx_tailroom_needed_cnt twice
wifi: mac80211: don't perform DA check on S1G beacon
wifi: ath12k: Fix wrong P2P device link id issue
wifi: ath12k: fix dead lock while flushing management frames
wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel
wifi: ath12k: cancel scan only on active scan vdev
wifi: mwifiex: Fix a loop in mwifiex_update_ampdu_rxwinsize()
wifi: mac80211: correctly check if CSA is active
wifi: cfg80211: Fix bitrate calculation overflow for HE rates
wifi: rsi: Fix memory corruption due to not set vif driver data size
wifi: ath12k: don't force radio frequency check in freq_to_idx()
wifi: ath12k: fix dma_free_coherent() pointer
wifi: ath10k: fix dma_free_coherent() pointer
====================
Link: https://patch.msgid.link/20260122110248.15450-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefano Garzarella says:
====================
vsock/virtio: fix TX credit handling
The original series was posted by Melbin K Mathew <mlbnkm1@gmail.com> till v4.
Since it's a real issue and the original author seems busy, I'm sending
the new version fixing my comments but keeping the authorship (and restoring
mine on patch 2 as reported on v4).
v5: https://lore.kernel.org/netdev/20260116201517.273302-1-sgarzare@redhat.com/
v4: https://lore.kernel.org/netdev/20251217181206.3681159-1-mlbnkm1@gmail.com/
From Melbin K Mathew <mlbnkm1@gmail.com>:
This series fixes TX credit handling in virtio-vsock:
Patch 1: Fix potential underflow in get_credit() using s64 arithmetic
Patch 2: Fix vsock_test seqpacket bounds test
Patch 3: Cap TX credit to local buffer size (security hardening)
Patch 4: Add stream TX credit bounds regression test
The core issue is that a malicious guest can advertise a huge buffer
size via SO_VM_SOCKETS_BUFFER_SIZE, causing the host to allocate
excessive sk_buff memory when sending data to that guest.
On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with
32 guest vsock connections advertising 2 GiB each and reading slowly
drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only
recovered after killing the QEMU process.
With this series applied, the same PoC shows only ~35 MiB increase in
Slab/SUnreclaim, no host OOM, and the guest remains responsive.
====================
Link: https://patch.msgid.link/20260121093628.9941-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a regression test for the TX credit bounds fix. The test verifies
that a sender with a small local buffer size cannot queue excessive
data even when the peer advertises a large receive buffer.
The client:
- Sets a small buffer size (64 KiB)
- Connects to server (which advertises 2 MiB buffer)
- Sends in non-blocking mode until EAGAIN
- Verifies total queued data is bounded
This guards against the original vulnerability where a remote peer
could cause unbounded kernel memory allocation by advertising a large
buffer and reading slowly.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: use sock_buf_size to check the bytes sent + small fixes]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-5-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The virtio transports derives its TX credit directly from peer_buf_alloc,
which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value.
On the host side this means that the amount of data we are willing to
queue for a connection is scaled by a guest-chosen buffer size, rather
than the host's own vsock configuration. A malicious guest can advertise
a large buffer and read slowly, causing the host to allocate a
correspondingly large amount of sk_buff memory.
The same thing would happen in the guest with a malicious host, since
virtio transports share the same code base.
Introduce a small helper, virtio_transport_tx_buf_size(), that
returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume
peer_buf_alloc.
This ensures the effective TX window is bounded by both the peer's
advertised buffer and our own buf_alloc (already clamped to
buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer
cannot force the other to queue more data than allowed by its own
vsock settings.
On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with
32 guest vsock connections advertising 2 GiB each and reading slowly
drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only
recovered after killing the QEMU process. That said, if QEMU memory is
limited with cgroups, the maximum memory used will be limited.
With this patch applied:
Before:
MemFree: ~61.6 GiB
Slab: ~142 MiB
SUnreclaim: ~117 MiB
After 32 high-credit connections:
MemFree: ~61.5 GiB
Slab: ~178 MiB
SUnreclaim: ~152 MiB
Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest
remains responsive.
Compatibility with non-virtio transports:
- VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per
socket based on the local vsk->buffer_* values; the remote side
cannot enlarge those queues beyond what the local endpoint
configured.
- Hyper-V's vsock transport uses fixed-size VMBus ring buffers and
an MTU bound; there is no peer-controlled credit field comparable
to peer_buf_alloc, and the remote endpoint cannot drive in-flight
kernel memory above those ring sizes.
- The loopback path reuses virtio_transport_common.c, so it
naturally follows the same semantics as the virtio transport.
This change is limited to virtio_transport_common.c and thus affects
virtio-vsock, vhost-vsock, and loopback, bringing them in line with the
"remote window intersected with local policy" behaviour that VMCI and
Hyper-V already effectively have.
Fixes: 06a8fc7836 ("VSOCK: Introduce virtio_vsock_common.ko")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: small adjustments after changing the previous patch]
[Stefano: tweak the commit message]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-4-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test requires the sender (client) to send all messages before waking
up the receiver (server).
Since virtio-vsock had a bug and did not respect the size of the TX
buffer, this test worked, but now that we are going to fix the bug, the
test hangs because the sender would fill the TX buffer before waking up
the receiver.
Set the buffer size in the sender (client) as well, as we already do for
the receiver (server).
Fixes: 5c338112e4 ("test/vsock: rework message bounds test")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-3-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The credit calculation in virtio_transport_get_credit() uses unsigned
arithmetic:
ret = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt);
If the peer shrinks its advertised buffer (peer_buf_alloc) while bytes
are in flight, the subtraction can underflow and produce a large
positive value, potentially allowing more data to be queued than the
peer can handle.
Reuse virtio_transport_has_space() which already handles this case and
add a comment to make it clear why we are doing that.
Fixes: 06a8fc7836 ("VSOCK: Introduce virtio_vsock_common.ko")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: use virtio_transport_has_space() instead of duplicating the code]
[Stefano: tweak the commit message]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-2-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MAX_FL (maximum frame length) and related calculations used ETH_HLEN,
which does not account for the 4-byte VLAN tag in tagged frames. This
caused the hardware to reject valid VLAN frames as oversized, resulting
in RX errors and dropped packets.
Use VLAN_ETH_HLEN instead of ETH_HLEN in the MAX_FL register setup,
cut-through mode threshold, buffer allocation, and max_mtu calculation.
Cc: stable@kernel.org # v6.18+
Fixes: 62b5bb7be7 ("net: fec: update MAX_FL based on the current MTU")
Fixes: d466c16026 ("net: fec: enable the Jumbo frame support for i.MX8QM")
Fixes: 59e9bf037d ("net: fec: add change_mtu to support dynamic buffer allocation")
Fixes: ec2a1681ed ("net: fec: use a member variable for maximum buffer size")
Signed-off-by: Clemens Gruber <mail@clemensgruber.at>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260121083751.66997-1-mail@clemensgruber.at
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In ovs_vport_get_upcall_stats(), some statistics protected by
u64_stats_sync, are read and accumulated in ignorance of possible
u64_stats_fetch_retry() events. These statistics are already accumulated
by u64_stats_inc(). Fix this by reading them into temporary variables
first.
Fixes: 1933ea365a ("net: openvswitch: Add support to count upcall packets")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260121072932.2360971-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmlxrcETHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXjzQB/9F3mR6KlsoootEHlMiVKa6cT12vSiJ
/1U+5cJbu8tLA1S3VtuLqhz3jw5ClQpsZyAfmWb4m0Rgdh1LEfq8Tzjlf4Ee9W77
JLC6JJNxBtEdAPL0XjQGHL42P3pFtkAbFO/WA9A8LJmMxL/2455Jmg9q4JyllFU4
k2a5GS6EpyvxW5VYKqBqihgSSY+zQ0Ob/gsZF1xdZB1v8ATdGf3vFMg0F+XmaPld
h1M/sxZSutfx1C9wgghLzqg2nP9+izSlvbwx0rXP35mmfcQyLo5Ita1gbiJI5OZy
AR83I4fa6sopruS/aIfGcNG9uEaxxWkexMGaVcpwmtD4qKrGc4gf0A9C
=At1m
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20260121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix ARM64 port of the MSHV driver (Anirudh Rayabharam)
- Fix huge page handling in the MSHV driver (Stanislav Kinsburskii)
- Minor fixes to driver code (Julia Lawall, Michael Kelley)
* tag 'hyperv-fixes-signed-20260121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: handle gpa intercepts for arm64
mshv: add definitions for arm64 gpa intercepts
mshv: Add __user attribute to argument passed to access_ok()
mshv: Store the result of vfs_poll in a variable of type __poll_t
mshv: Align huge page stride with guest mapping
Drivers: hv: Always do Hyper-V panic notification in hv_kmsg_dump()
Drivers: hv: vmbus: fix typo in function name reference
A minor fix for error handling in the event parser.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCaXGnLwAKCRCMstVUGiXM
g7O4AP4hyBQgNvdOzzqDvEJ+RxVcVWjNkimJfOMFLEGPqkTgZQD/XI9PfaXL6JVQ
eMbFjR7yvnmPDrVYYBJxttPzQDrxSAg=
=MXsr
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.19-2026-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf-tools fix from Namhyung Kim:
"A minor fix for error handling in the event parser"
* tag 'perf-tools-fixes-for-v6.19-2026-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf parse-events: Fix evsel allocation failure
It turns out that 2500Base-X actually works fine with in-band status on
MediaTek's LynxI PCS -- I wrongly concluded it didn't because it is
broken in all the copper SFP modules and GPON sticks I used for testing.
Hence report LINK_INBAND_ENABLE also for 2500Base-X mode.
This reverts most of commit a003c38d9b ("net: pcs: pcs-mtk-lynxi:
correctly report in-band status capabilities").
The removal of the QSGMII interface mode was correct and is left
untouched.
Link: https://github.com/openwrt/openwrt/issues/21436
Fixes: a003c38d9b ("net: pcs: pcs-mtk-lynxi: correctly report in-band status capabilities")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/b1cf26157b63fee838be09ae810497fb22fd8104.1768961746.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following:
BUG: KCSAN: data-race in rxrpc_peer_keepalive_worker / rxrpc_send_data_packet
which is reporting an issue with the reads and writes to ->last_tx_at in:
conn->peer->last_tx_at = ktime_get_seconds();
and:
keepalive_at = peer->last_tx_at + RXRPC_KEEPALIVE_TIME;
The lockless accesses to these to values aren't actually a problem as the
read only needs an approximate time of last transmission for the purposes
of deciding whether or not the transmission of a keepalive packet is
warranted yet.
Also, as ->last_tx_at is a 64-bit value, tearing can occur on a 32-bit
arch.
Fix both of these by switching to an unsigned int for ->last_tx_at and only
storing the LSW of the time64_t. It can then be reconstructed at need
provided no more than 68 years has elapsed since the last transmission.
Fixes: ace45bec6d ("rxrpc: Fix firewall route keepalive")
Reported-by: syzbot+6182afad5045e6703b3d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/695e7cfb.050a0220.1c677c.036b.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/1107124.1768903985@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-01-20 (ice, idpf)
For ice:
Cody Haas breaks dependency of needing both RSS key and LUT for
ice_get_rxfh() as ethtool ioctls do not always supply both.
Paul fixes issues related to devlink reload; adding missing deinit HW
call and moving hwmon exit function to the proper call chain.
For idpf:
Mina Almasry moves a register read call into the time sandwich to ensure
the register is properly flushed.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: read lower clock bits inside the time sandwich
ice: fix devlink reload call trace
ice: add missing ice_deinit_hw() in devlink reinit path
ice: Fix persistent failure in ice_get_rxfh
====================
Link: https://patch.msgid.link/20260120224430.410377-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prior to the blamed commit, the bridge_num range was from
0 to ds->max_num_bridges - 1. After the commit, it is from
1 to ds->max_num_bridges.
So this check:
if (bridge_num >= max)
return 0;
must be updated to:
if (bridge_num > max)
return 0;
in order to allow the last bridge_num value (==max) to be used.
This is easiest visible when a driver sets ds->max_num_bridges=1.
The observed behaviour is that even the first created bridge triggers
the netlink extack "Range of offloadable bridges exceeded" warning, and
is handled in software rather than being offloaded.
Fixes: 3f9bb0301d ("net: dsa: make dp->bridge_num one-based")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260120211039.3228999-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to apply the tx_chan_offset to the netfilter cfg channel or the
output channel will be incorrect for asp-3.0 and newer.
Fixes: e9f31435ee ("net: bcmasp: Add support for asp-v3.0")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260120192339.2031648-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 3cbf4ffba5 ("net: plumb network namespace into __skb_flow_dissect")
we have to provide a net pointer to __skb_flow_dissect(),
either via skb->dev, skb->sk, or a user provided pointer.
In the following case, syzbot was able to cook a bare skb.
WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0xb57/0x68b0 net/core/flow_dissector.c:1131, CPU#1: syz.2.1418/11053
Call Trace:
<TASK>
bond_flow_dissect drivers/net/bonding/bond_main.c:4093 [inline]
__bond_xmit_hash+0x2d7/0xba0 drivers/net/bonding/bond_main.c:4157
bond_xmit_hash_xdp drivers/net/bonding/bond_main.c:4208 [inline]
bond_xdp_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5139 [inline]
bond_xdp_get_xmit_slave+0x1fd/0x710 drivers/net/bonding/bond_main.c:5515
xdp_master_redirect+0x13f/0x2c0 net/core/filter.c:4388
bpf_prog_run_xdp include/net/xdp.h:700 [inline]
bpf_test_run+0x6b2/0x7d0 net/bpf/test_run.c:421
bpf_prog_test_run_xdp+0x795/0x10e0 net/bpf/test_run.c:1390
bpf_prog_test_run+0x2c7/0x340 kernel/bpf/syscall.c:4703
__sys_bpf+0x562/0x860 kernel/bpf/syscall.c:6182
__do_sys_bpf kernel/bpf/syscall.c:6274 [inline]
__se_sys_bpf kernel/bpf/syscall.c:6272 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:6272
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
Fixes: 58deb77cc5 ("bonding: balance ICMP echoes in layer3+4 mode")
Reported-by: syzbot+c46409299c70a221415e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/696faa23.050a0220.4cb9c.001f.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matteo Croce <mcroce@redhat.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260120161744.1893263-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both send_mcast4() and send_mcast6() use sleep 2 to wait for the tunnel
connection between the gateway and the relay, and for the listener
socket to be created in the LISTENER namespace.
However, tests sometimes fail because packets are sent before the
connection is fully established.
Increase the waiting time to make the tests more reliable, and use
wait_local_port_listen() to explicitly wait for the listener socket.
Fixes: c08e8baea7 ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260120133930.863845-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is
set to false, the driver may request the PMAC_ID from the firmware of the
network card, and this function will store that PMAC_ID at the provided
address pmac_id. This is the contract of this function.
However, there is a location within the driver where both
pmac_id_valid == false and pmac_id == NULL are being passed. This could
result in dereferencing a NULL pointer.
To resolve this issue, it is necessary to pass the address of a stub
variable to the function.
Fixes: 95046b927a ("be2net: refactor MAC-addr setup code")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20260120113734.20193-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit eeecf5d3a3.
This change lead to MHI WWAN device can't connect to internet.
I found a netwrok issue with kernel 6.19-rc4, but network works
well with kernel 6.18-rc1. After checking, this commit is the
root cause.
Before appliing this serial changes on MHI WWAN network, we shall
revert this change in case of v6.19 being impacted.
Fixes: eeecf5d3a3 ("net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not-at-end warning")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://patch.msgid.link/20260120072018.29375-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main changes are devicetree updates for qualcomm and rockchips arm64
platforms, fixing minor mistakes in SoC and board specific settings:
- GPIO settings for Pinephone Pro buttons
- Register ranges for rk3576 GPU
- Power domains on sc8280xp
- Clocks on qcom talos
- dtc warnings for extraneous properties, nonstandard node names and
undocument identifiers
The Tegra210 platform gets a single revert for a devicetree change that
caused a 6.19 regression.
On 32-bit Arm, we have trivial fixes for Microchip SAMA7 devicetree
files and NPCM Kconfig, as well as Andrew Jeffery being officially
listed as MAINTAINER for NPCM.
A single driver fix is for Qualcomm RPMHD power domains, bringing the
driver up to date with a devicetree change that added additional power
domains to be enabled.
-----BEGIN PGP SIGNATURE-----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=3jny
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main changes are devicetree updates for qualcomm and rockchips
arm64 platforms, fixing minor mistakes in SoC and board specific
settings:
- GPIO settings for Pinephone Pro buttons
- Register ranges for rk3576 GPU
- Power domains on sc8280xp
- Clocks on qcom talos
- dtc warnings for extraneous properties, nonstandard node names and
undocument identifiers
The Tegra210 platform gets a single revert for a devicetree change
that caused a 6.19 regression.
On 32-bit Arm, we have trivial fixes for Microchip SAMA7 devicetree
files and NPCM Kconfig, as well as Andrew Jeffery being officially
listed as MAINTAINER for NPCM.
A single driver fix is for Qualcomm RPMHD power domains, bringing the
driver up to date with a devicetree change that added additional power
domains to be enabled"
* tag 'soc-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
MAINTAINERS: Add Andrew as M: to ARM/NUVOTON NPCM ARCHITECTURE
MAINTAINERS: update email address for Yixun Lan
Revert "arm64: tegra: Add interconnect properties for Tegra210"
arm64: dts: rockchip: Drop unsupported properties
arm64: dts: rockchip: Fix gpio pinctrl node names
arm64: dts: rockchip: Fix pinctrl property typo on rk3326-odroid-go3
arm64: dts: rockchip: Drop "sitronix,st7789v" fallback compatible from rk3568-wolfvision
ARM: dts: microchip: sama7d65: fix size-cells property for i2c3
ARM: dts: microchip: sama7d65: fix the ranges property for flx9
arm: npcm: drop unused Kconfig ERRATA symbol
arm64: dts: rockchip: Fix wrong register range of rk3576 gpu
arm64: dts: rockchip: Configure MCLK for analog sound on NanoPi M5
arm64: dts: rockchip: Fix headphones widget name on NanoPi M5
ARM: dts: microchip: lan966x: Fix the access to the PHYs for pcb8290
arm64: dts: rockchip: remove redundant max-link-speed from nanopi-r4s
arm64: dts: rockchip: remove dangerous max-link-speed from helios64
arm64: dts: rockchip: fix unit-address for RK3588 NPU's core1 and core2's IOMMU
arm64: dts: rockchip: Fix wifi interrupts flag on Sakura Pi RK3308B
arm64: dts: qcom: sm8650: Fix compile warnings in USB controller node
arm64: dts: qcom: sm8550: Fix compile warnings in USB controller node
...
-----BEGIN PGP SIGNATURE-----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=n4z3
-----END PGP SIGNATURE-----
Merge tag 'for-6.19-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- protect reading super block vs setting block size externally (found
by syzbot)
- make sure no transaction is started in read-only mode even with some
rescue mount option combinations
- fix checksum calculation of backup super blocks when block-group-tree
is enabled
- more extensive mount-time checks of device items that could be left
after device replace and attempting degraded mount
- fix build warning with -Wmaybe-uninitialized on loongarch64-gcc 12
* tag 'for-6.19-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add extra device item checks at mount
btrfs: fix missing fields in superblock backup with BLOCK_GROUP_TREE
btrfs: reject new transactions if the fs is fully read-only
btrfs: sync read disk super and set block size
btrfs: fix Wmaybe-uninitialized warning in replay_one_buffer()
On PREEMPT_RT kernels, local_lock becomes a sleeping lock. The current
check in kmalloc_nolock() only verifies we're not in NMI or hard IRQ
context, but misses the case where preemption is disabled.
When a BPF program runs from a tracepoint with preemption disabled
(preempt_count > 0), kmalloc_nolock() proceeds to call
local_lock_irqsave() which attempts to acquire a sleeping lock,
triggering:
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6128
preempt_count: 2, expected: 0
Fix this by checking !preemptible() on PREEMPT_RT, which directly
expresses the constraint that we cannot take a sleeping lock when
preemption is disabled. This encompasses the previous checks for NMI
and hard IRQ contexts while also catching cases where preemption is
disabled.
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Reported-by: syzbot+b1546ad4a95331b2101e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b1546ad4a95331b2101e
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260113150639.48407-1-swarajgaikwad1925@gmail.co
Cc: <stable@vger.kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Add missing power-domains to the SC8280XP RPM power-domain and ensure
these are voted for from the remoteproc instances while powering them
up.
Clear a couple of DeviceTree validation warnings in SM8550 and SM8650
USB controller nodes.
Specify the correct display panel on the OnePlus 6.
Correct the UFS clock mapping on Talos, to ensure UFS is properly
clocked.
Add Abel's old emails address to .mailmap.
-----BEGIN PGP SIGNATURE-----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=ztcO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Tt/r
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 DeviceTree fixes for v6.19
Add missing power-domains to the SC8280XP RPM power-domain and ensure
these are voted for from the remoteproc instances while powering them
up.
Clear a couple of DeviceTree validation warnings in SM8550 and SM8650
USB controller nodes.
Specify the correct display panel on the OnePlus 6.
Correct the UFS clock mapping on Talos, to ensure UFS is properly
clocked.
Add Abel's old emails address to .mailmap.
* tag 'qcom-arm64-fixes-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm8650: Fix compile warnings in USB controller node
arm64: dts: qcom: sm8550: Fix compile warnings in USB controller node
arm64: dts: qcom: sc8280xp: Add missing VDD_MXC links
pmdomain: qcom: rpmhpd: Add MXC to SC8280XP
dt-bindings: power: qcom,rpmpd: Add SC8280XP_MXC_AO
arm64: dts qcom: sdm845-oneplus-enchilada: Specify panel name within the compatible
mailmap: Update email address for Abel Vesa
arm64: dts: qcom: talos: Correct UFS clocks ordering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In recent testing, verification of XDP_REDIRECT and zero-copy features
failed because the driver is not setting the corresponding feature flags.
Fixes: efabce2901 ("octeontx2-pf: AF_XDP zero copy receive support")
Fixes: 66c0e13ad2 ("drivers: net: turn on XDP features")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20260119100222.2267925-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The usbnet driver initializes net->max_mtu to ETH_MAX_MTU before calling
the device's bind() callback. When the bind() callback sets
dev->hard_mtu based the device's actual capability (from CDC Ethernet's
wMaxSegmentSize descriptor), max_mtu is never updated to reflect this
hardware limitation).
This allows userspace (DHCP or IPv6 RA) to configure MTU larger than the
device can handle, leading to silent packet drops when the backend sends
packet exceeding the device's buffer size.
Fix this by limiting net->max_mtu to the device's hard_mtu after the
bind callback returns.
See https://gitlab.com/qemu-project/qemu/-/issues/3268 and
https://bugs.passt.top/attachment.cgi?bugid=189
Fixes: f77f0aee4d ("net: use core MTU range checking in USB NIC drivers")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://bugs.passt.top/show_bug.cgi?id=189
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://patch.msgid.link/20260119075518.2774373-1-lvivier@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot found that ndisc_router_discovery() could read and write
in6_dev->ra_mtu without holding a lock [1]
This looks fine, IFLA_INET6_RA_MTU is best effort.
Add READ_ONCE()/WRITE_ONCE() to document the race.
Note that we might also reject illegal MTU values
(mtu < IPV6_MIN_MTU || mtu > skb->dev->mtu) in a future patch.
[1]
BUG: KCSAN: data-race in ndisc_router_discovery / ndisc_router_discovery
read to 0xffff888119809c20 of 4 bytes by task 25817 on cpu 1:
ndisc_router_discovery+0x151d/0x1c90 net/ipv6/ndisc.c:1558
ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841
icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989
ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500
ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79
...
write to 0xffff888119809c20 of 4 bytes by task 25816 on cpu 0:
ndisc_router_discovery+0x155a/0x1c90 net/ipv6/ndisc.c:1559
ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841
icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989
ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500
ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79
...
value changed: 0x00000000 -> 0xe5400659
Fixes: 49b99da2c9 ("ipv6: add IFLA_INET6_RA_MTU to expose mtu value")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rocco Yue <rocco.yue@mediatek.com>
Link: https://patch.msgid.link/20260118152941.2563857-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For these two firmware mailbox commands, in txgbe_test_hostif() and
txgbe_set_phy_link_hostif(), there is no need to read data from the
buffer.
Under the current setting, OEM firmware will cause the driver to fail to
probe. Because OEM firmware returns more link information, with a larger
OEM structure txgbe_hic_ephy_getlink. However, the current driver does
not support the OEM function. So just fix it in the way that does not
involve reading the returned data.
Fixes: d84a3ff9aa ("net: txgbe: Restrict the use of mismatched FW versions")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/2914AB0BC6158DDA+20260119065935.6015-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
