mirror of
https://github.com/torvalds/linux.git
synced 2026-07-29 02:31:27 +02:00
09a939487f
1329495 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jakub Kicinski
|
09a939487f |
eth: via-rhine: fix calling napi_enable() in atomic context
napi_enable() may sleep now, take netdev_lock() before rp->lock.
napi_enable() is hidden inside init_registers().
Note that this patch orders netdev_lock after rp->task_lock,
to avoid having to take the netdev_lock() around disable path.
Fixes:
|
||
|
Jakub Kicinski
|
f1d12bc7a5 |
eth: niu: fix calling napi_enable() in atomic context
napi_enable() may sleep now, take netdev_lock() before np->lock.
Fixes:
|
||
|
Jakub Kicinski
|
d19e612c47 |
eth: 8139too: fix calling napi_enable() in atomic context
napi_enable() may sleep now, take netdev_lock() before tp->lock and
tp->rx_lock.
Fixes:
|
||
|
Jakub Kicinski
|
5c4470a171 |
eth: forcedeth: fix calling napi_enable() in atomic context
napi_enable() may sleep now, take netdev_lock() before np->lock.
Fixes:
|
||
|
Jakub Kicinski
|
a878f3e4ac |
eth: forcedeth: remove local wrappers for napi enable/disable
The local helpers for calling napi_enable() and napi_disable() don't serve much purpose and they will complicate the fix in the subsequent patch. Remove them, call the core functions directly. Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
8ed47e4e0b |
eth: tg3: fix calling napi_enable() in atomic context
tg3 has a spin lock protecting most of the config,
switch to taking netdev_lock() explicitly on enable/start
paths. Disable/stop paths seem to not be under the spin
lock (since napi_disable() already needs to sleep),
so leave that side as is.
tg3_restart_hw() releases and re-takes the spin lock,
we need to do the same because dev_close() needs to
take netdev_lock().
Fixes:
|
||
|
Jakub Kicinski
|
964417a5d4 |
tools: ynl: c: correct reverse decode of empty attrs
netlink reports which attribute was incorrect by sending back
an attribute offset. Offset points to the address of struct nlattr,
but to interpret the type we also need the nesting path.
Attribute IDs have different meaning in different nests
of the same message.
Correct the condition for "is the offset within current attribute".
ynl_attr_data_len() does not include the attribute header,
so the end offset was off by 4 bytes.
This means that we'd always skip over flags and empty nests.
The devmem tests, for example, issues an invalid request with
empty queue nests, resulting in the following error:
YNL failed: Kernel error: missing attribute: .queues.ifindex
The message is incorrect, "queues" nest does not have an "ifindex"
attribute defined. With this fix we decend correctly into the nest:
YNL failed: Kernel error: missing attribute: .queues.id
Fixes:
|
||
|
Thomas Weißschuh
|
fd53aa40e6 |
ptp: Ensure info->enable callback is always set
The ioctl and sysfs handlers unconditionally call the ->enable callback.
Not all drivers implement that callback, leading to NULL dereferences.
Example of affected drivers: ptp_s390.c, ptp_vclock.c and ptp_mock.c.
Instead use a dummy callback if no better was specified by the driver.
Fixes:
|
||
|
Khaled Elnaggar
|
cde5959913 |
documentation: networking: fix spelling mistakes
Fix a couple of typos/spelling mistakes in the documentation. Signed-off-by: Khaled Elnaggar <khaledelnaggarlinux@gmail.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://patch.msgid.link/20250123082521.59997-1-khaledelnaggarlinux@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Stanislav Fomichev
|
979284535a |
net/mlx5e: add missing cpu_to_node to kvzalloc_node in mlx5e_open_xdpredirect_sq
kvzalloc_node is not doing a runtime check on the node argument
(__alloc_pages_node_noprof does have a VM_BUG_ON, but it expands to
nothing on !CONFIG_DEBUG_VM builds), so doing any ethtool/netlink
operation that calls mlx5e_open on a CPU that's larger that MAX_NUMNODES
triggers OOB access and panic (see the trace below).
Add missing cpu_to_node call to convert cpu id to node id.
[ 165.427394] mlx5_core 0000:5c:00.0 beth1: Link up
[ 166.479327] BUG: unable to handle page fault for address: 0000000800000010
[ 166.494592] #PF: supervisor read access in kernel mode
[ 166.505995] #PF: error_code(0x0000) - not-present page
...
[ 166.816958] Call Trace:
[ 166.822380] <TASK>
[ 166.827034] ? __die_body+0x64/0xb0
[ 166.834774] ? page_fault_oops+0x2cd/0x3f0
[ 166.843862] ? exc_page_fault+0x63/0x130
[ 166.852564] ? asm_exc_page_fault+0x22/0x30
[ 166.861843] ? __kvmalloc_node_noprof+0x43/0xd0
[ 166.871897] ? get_partial_node+0x1c/0x320
[ 166.880983] ? deactivate_slab+0x269/0x2b0
[ 166.890069] ___slab_alloc+0x521/0xa90
[ 166.898389] ? __kvmalloc_node_noprof+0x43/0xd0
[ 166.908442] __kmalloc_node_noprof+0x216/0x3f0
[ 166.918302] ? __kvmalloc_node_noprof+0x43/0xd0
[ 166.928354] __kvmalloc_node_noprof+0x43/0xd0
[ 166.938021] mlx5e_open_channels+0x5e2/0xc00
[ 166.947496] mlx5e_open_locked+0x3e/0xf0
[ 166.956201] mlx5e_open+0x23/0x50
[ 166.963551] __dev_open+0x114/0x1c0
[ 166.971292] __dev_change_flags+0xa2/0x1b0
[ 166.980378] dev_change_flags+0x21/0x60
[ 166.988887] do_setlink+0x38d/0xf20
[ 166.996628] ? ep_poll_callback+0x1b9/0x240
[ 167.005910] ? __nla_validate_parse.llvm.10713395753544950386+0x80/0xd70
[ 167.020782] ? __wake_up_sync_key+0x52/0x80
[ 167.030066] ? __mutex_lock+0xff/0x550
[ 167.038382] ? security_capable+0x50/0x90
[ 167.047279] rtnl_setlink+0x1c9/0x210
[ 167.055403] ? ep_poll_callback+0x1b9/0x240
[ 167.064684] ? security_capable+0x50/0x90
[ 167.073579] rtnetlink_rcv_msg+0x2f9/0x310
[ 167.082667] ? rtnetlink_bind+0x30/0x30
[ 167.091173] netlink_rcv_skb+0xb1/0xe0
[ 167.099492] netlink_unicast+0x20f/0x2e0
[ 167.108191] netlink_sendmsg+0x389/0x420
[ 167.116896] __sys_sendto+0x158/0x1c0
[ 167.125024] __x64_sys_sendto+0x22/0x30
[ 167.133534] do_syscall_64+0x63/0x130
[ 167.141657] ? __irq_exit_rcu.llvm.17843942359718260576+0x52/0xd0
[ 167.155181] entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes:
|
||
|
Jakub Kicinski
|
50bf398e1c |
net: netdevsim: try to close UDP port harness races
syzbot discovered that we remove the debugfs files after we free
the netdev. Try to clean up the relevant dir while the device
is still around.
Reported-by: syzbot+2e5de9e3ab986b71d2bf@syzkaller.appspotmail.com
Fixes:
|
||
|
Eric Dumazet
|
5de7665e0a |
net: rose: fix timer races against user threads
Rose timers only acquire the socket spinlock, without
checking if the socket is owned by one user thread.
Add a check and rearm the timers if needed.
BUG: KASAN: slab-use-after-free in rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174
Read of size 2 at addr ffff88802f09b82a by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174
call_timer_fn+0x187/0x650 kernel/time/timer.c:1793
expire_timers kernel/time/timer.c:1844 [inline]
__run_timers kernel/time/timer.c:2418 [inline]
__run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2430
run_timer_base kernel/time/timer.c:2439 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2449
handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
Fixes:
|
||
|
谢致邦 (XIE Zhibang)
|
09ebd028d6 |
net: the appletalk subsystem no longer uses ndo_do_ioctl
ndo_do_ioctl is no longer used by the appletalk subsystem after commit
|
||
|
Paul Fertser
|
05d91cdb1f |
net/ncsi: use dev_set_mac_address() for Get MC MAC Address handling
Copy of the rationale from 790071347a0a1a89e618eedcd51c687ea783aeb3: Change ndo_set_mac_address to dev_set_mac_address because dev_set_mac_address provides a way to notify network layer about MAC change. In other case, services may not aware about MAC change and keep using old one which set from network adapter driver. As example, DHCP client from systemd do not update MAC address without notification from net subsystem which leads to the problem with acquiring the right address from DHCP server. Since dev_set_mac_address requires RTNL lock the operation can not be performed directly in the response handler, see |
||
|
Eric Dumazet
|
15a901361e |
ipmr: do not call mr_mfc_uses_dev() for unres entries
syzbot found that calling mr_mfc_uses_dev() for unres entries
would crash [1], because c->mfc_un.res.minvif / c->mfc_un.res.maxvif
alias to "struct sk_buff_head unresolved", which contain two pointers.
This code never worked, lets remove it.
[1]
Unable to handle kernel paging request at virtual address ffff5fff2d536613
KASAN: maybe wild-memory-access in range [0xfffefff96a9b3098-0xfffefff96a9b309f]
Modules linked in:
CPU: 1 UID: 0 PID: 7321 Comm: syz.0.16 Not tainted 6.13.0-rc7-syzkaller-g1950a0af2d55 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline]
pc : mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334
lr : mr_mfc_uses_dev net/ipv4/ipmr_base.c:289 [inline]
lr : mr_table_dump+0x694/0x8b0 net/ipv4/ipmr_base.c:334
Call trace:
mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] (P)
mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 (P)
mr_rtm_dumproute+0x254/0x454 net/ipv4/ipmr_base.c:382
ipmr_rtm_dumproute+0x248/0x4b4 net/ipv4/ipmr.c:2648
rtnl_dump_all+0x2e4/0x4e8 net/core/rtnetlink.c:4327
rtnl_dumpit+0x98/0x1d0 net/core/rtnetlink.c:6791
netlink_dump+0x4f0/0xbc0 net/netlink/af_netlink.c:2317
netlink_recvmsg+0x56c/0xe64 net/netlink/af_netlink.c:1973
sock_recvmsg_nosec net/socket.c:1033 [inline]
sock_recvmsg net/socket.c:1055 [inline]
sock_read_iter+0x2d8/0x40c net/socket.c:1125
new_sync_read fs/read_write.c:484 [inline]
vfs_read+0x740/0x970 fs/read_write.c:565
ksys_read+0x15c/0x26c fs/read_write.c:708
Fixes:
|
||
|
Jakub Kicinski
|
965adae5a3 |
selftests/net: packetdrill: more xfail changes (and a correction)
Recent change to add more cases to XFAIL has a broken regex,
the matching needs a real regex not a glob pattern.
While at it add the cases Willem pointed out during review.
Fixes:
|
||
|
Harshit Mogalapalli
|
59e00e8ca2 |
net: mvneta: fix locking in mvneta_cpu_online()
When port is stopped, unlock before returning
Fixes:
|
||
|
Dheeraj Reddy Jonnalagadda
|
61dc1fd920 |
net: fec: implement TSO descriptor cleanup
Implement cleanup of descriptors in the TSO error path of
fec_enet_txq_submit_tso(). The cleanup
- Unmaps DMA buffers for data descriptors skipping TSO header
- Clears all buffer descriptors
- Handles extended descriptors by clearing cbd_esc when enabled
Fixes:
|
||
|
Dimitri Fedrau
|
a197004cf3 |
net: phy: marvell-88q2xxx: Fix temperature measurement with reset-gpios
When using temperature measurement on Marvell 88Q2XXX devices and the
reset-gpios property is set in DT, the device does a hardware reset when
interface is brought down and up again. That means that the content of
the register MDIO_MMD_PCS_MV_TEMP_SENSOR2 is reset to default and that
leads to permanent deactivation of the temperature measurement, because
activation is done in mv88q2xxx_probe. To fix this move activation of
temperature measurement to mv88q222x_config_init.
Fixes:
|
||
|
Jian Shen
|
92e5995773 |
net: hns3: fix oops when unload drivers paralleling
When unload hclge driver, it tries to disable sriov first for each
ae_dev node from hnae3_ae_dev_list. If user unloads hns3 driver at
the time, because it removes all the ae_dev nodes, and it may cause
oops.
But we can't simply use hnae3_common_lock for this. Because in the
process flow of pci_disable_sriov(), it will trigger the remove flow
of VF, which will also take hnae3_common_lock.
To fixes it, introduce a new mutex to protect the unload process.
Fixes:
|
||
|
Yijie Yang
|
ba1af257a0 |
dt-bindings: net: qcom,ethqos: Correct fallback compatible for qcom,qcs615-ethqos
The qcs615-ride utilizes the same EMAC as the qcs404, rather than the
sm8150. The current incorrect fallback could result in packet loss.
The Ethernet on qcs615-ride is currently not utilized by anyone. Therefore,
there is no need to worry about any ABI impact.
Fixes:
|
||
|
Paul Fertser
|
6bb194d036 |
net/ncsi: wait for the last response to Deselect Package before configuring channel
The NCSI state machine as it's currently implemented assumes that
transition to the next logical state is performed either explicitly by
calling `schedule_work(&ndp->work)` to re-queue itself or implicitly
after processing the predefined (ndp->pending_req_num) number of
replies. Thus to avoid the configuration FSM from advancing prematurely
and getting out of sync with the process it's essential to not skip
waiting for a reply.
This patch makes the code wait for reception of the Deselect Package
response for the last package probed before proceeding to channel
configuration.
Thanks go to Potin Lai and Cosmo Chou for the initial investigation and
testing.
Fixes:
|
||
|
Christian Marangi
|
d31a49d37c |
net: airoha: Fix wrong GDM4 register definition
Fix wrong GDM4 register definition, in Airoha SDK GDM4 is defined at
offset 0x2400 but this doesn't make sense as it does conflict with the
CDM4 that is in the same location.
Following the pattern where each GDM base is at the FWD_CFG, currently
GDM4 base offset is set to 0x2500. This is correct but REG_GDM4_FWD_CFG
and REG_GDM4_SRC_PORT_SET are still using the SDK reference with the
0x2400 offset. Fix these 2 define by subtracting 0x100 to each register
to reflect the real address location.
Fixes:
|
||
|
Dan Carpenter
|
110b43ef05 |
NFC: nci: Add bounds checking in nci_hci_create_pipe()
The "pipe" variable is a u8 which comes from the network. If it's more
than 127, then it results in memory corruption in the caller,
nci_hci_connect_gate().
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Jamal Hadi Salim
|
d62b04fca4 |
net: sched: fix ets qdisc OOB Indexing
Haowei Yan <g1042620637@gmail.com> found that ets_class_from_arg() can
index an Out-Of-Bound class in ets_class_from_arg() when passed clid of
0. The overflow may cause local privilege escalation.
[ 18.852298] ------------[ cut here ]------------
[ 18.853271] UBSAN: array-index-out-of-bounds in net/sched/sch_ets.c:93:20
[ 18.853743] index 18446744073709551615 is out of range for type 'ets_class [16]'
[ 18.854254] CPU: 0 UID: 0 PID: 1275 Comm: poc Not tainted 6.12.6-dirty #17
[ 18.854821] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 18.856532] Call Trace:
[ 18.857441] <TASK>
[ 18.858227] dump_stack_lvl+0xc2/0xf0
[ 18.859607] dump_stack+0x10/0x20
[ 18.860908] __ubsan_handle_out_of_bounds+0xa7/0xf0
[ 18.864022] ets_class_change+0x3d6/0x3f0
[ 18.864322] tc_ctl_tclass+0x251/0x910
[ 18.864587] ? lock_acquire+0x5e/0x140
[ 18.865113] ? __mutex_lock+0x9c/0xe70
[ 18.866009] ? __mutex_lock+0xa34/0xe70
[ 18.866401] rtnetlink_rcv_msg+0x170/0x6f0
[ 18.866806] ? __lock_acquire+0x578/0xc10
[ 18.867184] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 18.867503] netlink_rcv_skb+0x59/0x110
[ 18.867776] rtnetlink_rcv+0x15/0x30
[ 18.868159] netlink_unicast+0x1c3/0x2b0
[ 18.868440] netlink_sendmsg+0x239/0x4b0
[ 18.868721] ____sys_sendmsg+0x3e2/0x410
[ 18.869012] ___sys_sendmsg+0x88/0xe0
[ 18.869276] ? rseq_ip_fixup+0x198/0x260
[ 18.869563] ? rseq_update_cpu_node_id+0x10a/0x190
[ 18.869900] ? trace_hardirqs_off+0x5a/0xd0
[ 18.870196] ? syscall_exit_to_user_mode+0xcc/0x220
[ 18.870547] ? do_syscall_64+0x93/0x150
[ 18.870821] ? __memcg_slab_free_hook+0x69/0x290
[ 18.871157] __sys_sendmsg+0x69/0xd0
[ 18.871416] __x64_sys_sendmsg+0x1d/0x30
[ 18.871699] x64_sys_call+0x9e2/0x2670
[ 18.871979] do_syscall_64+0x87/0x150
[ 18.873280] ? do_syscall_64+0x93/0x150
[ 18.874742] ? lock_release+0x7b/0x160
[ 18.876157] ? do_user_addr_fault+0x5ce/0x8f0
[ 18.877833] ? irqentry_exit_to_user_mode+0xc2/0x210
[ 18.879608] ? irqentry_exit+0x77/0xb0
[ 18.879808] ? clear_bhb_loop+0x15/0x70
[ 18.880023] ? clear_bhb_loop+0x15/0x70
[ 18.880223] ? clear_bhb_loop+0x15/0x70
[ 18.880426] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 18.880683] RIP: 0033:0x44a957
[ 18.880851] Code: ff ff e8 fc 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 8974 24 10
[ 18.881766] RSP: 002b:00007ffcdd00fad8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 18.882149] RAX: ffffffffffffffda RBX: 00007ffcdd010db8 RCX: 000000000044a957
[ 18.882507] RDX: 0000000000000000 RSI: 00007ffcdd00fb70 RDI: 0000000000000003
[ 18.885037] RBP: 00007ffcdd010bc0 R08: 000000000703c770 R09: 000000000703c7c0
[ 18.887203] R10: 0000000000000080 R11: 0000000000000246 R12: 0000000000000001
[ 18.888026] R13: 00007ffcdd010da8 R14: 00000000004ca7d0 R15: 0000000000000001
[ 18.888395] </TASK>
[ 18.888610] ---[ end trace ]---
Fixes:
|
||
|
Linus Torvalds
|
0ad9617c78 |
Networking changes for 6.14.
Core
----
- More core refactoring to reduce the RTNL lock contention,
including preparatory work for the per-network namespace RTNL lock,
replacing RTNL lock with a per device-one to protect NAPI-related
net device data and moving synchronize_net() calls outside such
lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and
more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter
---------
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on
each restart.
Protocols
---------
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets,
to avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel
TLS (for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API
----------
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling
-----------------
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec,
to ease maintenance and future development.
- Add YNL support for decoding the link types used in net
self-tests, allowing a single build to run both net and
drivers/net.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues, affecting
both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station mode
support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hrsp
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
|
||
|
Linus Torvalds
|
5f537664e7 |
cachestat: fix page cache statistics permission checking
When the 'cachestat()' system call was added in commit |
||
|
Linus Torvalds
|
c4b9570cfb |
audit/stable-6.14 PR 20250121
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmeQE4IUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMIrQ//YFJ3plDqyyZ8PaqPej7xQ0CVsylL 55eGU5pdG2MEvFeqKIsxLdW4Xn8SachH7AyB6YTUGUxB2JHeT0lSQ0Ttl1+xk++J vD9dYckum9QW4o5ickoitOukhO3KugYSuMh+w5SScTI13ktZAnAeJLcMxqTNmZdD hzXkq/DtDenHWyR4z8VyddOhkUOdZ8tF3gBUzB3imhEMuKrU+238Bc4Th19ZeszM NIFkGZL2X7tUPGnPbudNcNhKJtRakzlUzAfaarJWZqp5xNIWXORaxYgMBbeI3VOv Cm0g0JRR4jxh9wg3RvrShS7Eug/h0P/Urr9xGZvsPXi0UnkV2u4eMG5AYkRMBsjH GmlY/XQEZe2NI2Yded7dNxcGWX7mgiPeBN5dqBYloXaB0ASR2NGX42QorB/MmUdn cwuKI+5HFSYNko35SL5xoDcg7PJ8wS882qtWPmjN9Dx+tv+Lw6TqtppS8h1/np70 wz5Euk7UgpIxpQ4zJEbZSditHkc2IxDeU7McjXJ7fA98iJj4umU0Z5JyCrXaxPvi fqT3V8NKs8OiBM0Bwmgs3CBA2mPdgqh0RPqhGplhQ9gqYNsrfAUXf1LJz5TfWksc dvr/xCcQhgxJsJ3Xu7SxGW+41YF16pYy2rE8RV4N4FnPrkbirVFT5tPio414xg7W IY/Aw1Rk0xc+lJY= =9M+E -----END PGP SIGNATURE----- Merge tag 'audit-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit update from Paul Moore: "A single audit patch that fixes a problem when collecting pathnames for audit PATH records that was caused by some faulty pathname matching logic" * tag 'audit-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix suffixed '/' filename matching |
||
|
Linus Torvalds
|
690ffcd817 |
selinux/stable-6.14 PR 20250121
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmeQE9YUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXO66BAAmmhqw3Cm94u6QOjYTQCNrHpmZVpv atPfW0EIlvYWuLGvyQZVh/2SKrYm0o7iNlTlOyMcBV9BfFUZd6vepX3L+ylhMacG L2lg5jgl11zUZdo8m++38kCABbdMexhTzgtfdAm+w2RmLRoOzXjBOCDx18sWVtCy aV3DQAvl6qdU/Y5U6PccmOCwgFVQEmWzQ4A1CMq696Fybr4EzTjI8mCCnotHWarz cgfMHHf5RYR4M4VdmxWo3MR6y6Qiq19/Vsy43YP/G/A0Ad+mfLqhHmc27+Mx2bDk IfdrvOOjaVxiEeIJe6mOePcW9p1D9q4OrPmBZHxN1+R3ck7k0MgVLIDvSzLDMbbj 3PSZx2UFk1xz+B0x3hvzhAXJ5YfbAjPj1Z65HlLIQBFBo5jvLWMrLxdpcH4eRdhT ovTqFuB4wQwYOeeKlXlnCWFitsAynjo9qGxcqjxG63geJfnBlsnLoYIa0g+cN6Uf 3Ty0+zeHDfCajj40buvtOWv98CyAMF5vBopnr18Kfo4upp6pgVERVBoGy2Yw020I yItiRhi1fpV31J8Gxrd7WA2/OmZZLISnAJtKMSsyd+hBihfOjVZ9LhKKYJk4vH+X mWVOdplHpCDe6y2EJE4EmaNwQCOVJfg4/Xvh9fghELdBdc91wFGPDO36AitDBNr8 /o13aUvFarsEmtA= =UJsr -----END PGP SIGNATURE----- Merge tag 'selinux-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: - Extended permissions supported in conditional policy The SELinux extended permissions, aka "xperms", allow security admins to target individuals ioctls, and recently netlink messages, with their SELinux policy. Adding support for conditional policies allows admins to toggle the granular xperms using SELinux booleans, helping pave the way for greater use of xperms in general purpose SELinux policies. This change bumps the maximum SELinux policy version to 34. - Fix a SCTP/SELinux error return code inconsistency Depending on the loaded SELinux policy, specifically it's EXTSOCKCLASS support, the bind(2) LSM/SELinux hook could return different error codes due to the SELinux code checking the socket's SELinux object class (which can vary depending on EXTSOCKCLASS) and not the socket's sk_protocol field. We fix this by doing the obvious, and looking at the sock->sk_protocol field instead of the object class. - Makefile fixes to properly cleanup av_permissions.h Add av_permissions.h to "targets" so that it is properly cleaned up using the kbuild infrastructure. - A number of smaller improvements by Christian Göttsche A variety of straightforward changes to reduce code duplication, reduce pointer lookups, migrate void pointers to defined types, simplify code, constify function parameters, and correct iterator types. * tag 'selinux-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: make more use of str_read() when loading the policy selinux: avoid unnecessary indirection in struct level_datum selinux: use known type instead of void pointer selinux: rename comparison functions for clarity selinux: rework match_ipv6_addrmask() selinux: constify and reconcile function parameter names selinux: avoid using types indicating user space interaction selinux: supply missing field initializers selinux: add netlink nlmsg_type audit message selinux: add support for xperms in conditional policies selinux: Fix SCTP error inconsistency in selinux_socket_bind() selinux: use native iterator types selinux: add generated av_permissions.h to targets |
||
|
Linus Torvalds
|
f96a974170 |
lsm/stable-6.14 PR 20250121
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmeQFBoUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPvcA//XCdwMz0bGtWKv58nuyP8vkQx08n6 //olz/O8te3uWK5O3kRiarzFLwH8qsHQ6A7GYalwwix34hatR4ndJE0Y/guVRWa1 +aBmJxJ7Jm/q3fvpAEfqiSgreuE6kBoztlDOWEq+hUQGu4qfnQGm2EnvbvfFrAmN VheOfIQSU2KCL/Scc3FGnF6uru4WrqN0JJ9RbvrEpfdQgmcyTGLnQsZLljutWSIq kDWkteIr7cj3O9J45zpxZsTftvYSgVn/y1iKeXbHI4DBA1eheK12vsHB9AADKI1J GwHxOrnLpZtv+ICUKqcfFTmWTl+NmfJJurAT5KXKdBjL3xM5MoJlBvK1A5qE9CMo LaHVG/TZR2MmBaoM3EN+gvWhDgWlvT02Q/0cYaafTlVLMez3HtfctxN6OnCvTXTB Y8dqYClhhlBm/mHQwYfMoeKw4MftUpzEqBd1Nj7Qe8dbP0f/62Ca3K2B3D6Rf8QV pj3ryMlSWYV9mdTerruLNQexTGoN7l66jPwzdWpTbFeL3WmNtfCako8OZGbXgPIu Iahm3P+jnSVx8ZQro2c9zwdKXI5xiI335pCBbDZ8aX+JAsfj0OofHsFx5Q5diber M7tAEhxDqRisbpz7Ei+/LOAEGg2Z619XKg8ks4z6Y4P5PF7zEgeWTkZJk2iLbxXe 6LLOjmF7LLw+G4M= =fgyr -----END PGP SIGNATURE----- Merge tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull lsm updates from Paul Moore: - Improved handling of LSM "secctx" strings through lsm_context struct The LSM secctx string interface is from an older time when only one LSM was supported, migrate over to the lsm_context struct to better support the different LSMs we now have and make it easier to support new LSMs in the future. These changes explain the Rust, VFS, and networking changes in the diffstat. - Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are enabled Small tweak to be a bit smarter about when we build the LSM's common audit helpers. - Check for absurdly large policies from userspace in SafeSetID SafeSetID policies rules are fairly small, basically just "UID:UID", it easy to impose a limit of KMALLOC_MAX_SIZE on policy writes which helps quiet a number of syzbot related issues. While work is being done to address the syzbot issues through other mechanisms, this is a trivial and relatively safe fix that we can do now. - Various minor improvements and cleanups A collection of improvements to the kernel selftests, constification of some function parameters, removing redundant assignments, and local variable renames to improve readability. * tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: lockdown: initialize local array before use to quiet static analysis safesetid: check size of policy writes net: corrections for security_secid_to_secctx returns lsm: rename variable to avoid shadowing lsm: constify function parameters security: remove redundant assignment to return variable lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set selftests: refactor the lsm `flags_overset_lsm_set_self_attr` test binder: initialize lsm_context structure rust: replace lsm context+len with lsm_context lsm: secctx provider check on release lsm: lsm_context in security_dentry_init_security lsm: use lsm_context in security_inode_getsecctx lsm: replace context+len with lsm_context lsm: ensure the correct LSM context releaser |
||
|
Linus Torvalds
|
678ca9f78e |
One minor code improvement for v6.14
-----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEC+9tH1YyUwIQzUIeOKUVfIxDyBEFAmeQGOEXHGNhc2V5QHNj aGF1Zmxlci1jYS5jb20ACgkQOKUVfIxDyBGbYA//RwccdJJXj5r3gUjfEb1p58hV z2D2cbJ6P23+e+mTa+AF/EqDQyRY1SizVnV/yV+ztfkXQ5DM0MLIMziWnenmwCeQ FTFp9D+/3q9J26+SdYV4JN9I/dVYeMVjIzEIQr82lEoiAWhPgNeJ8CKlme14wpUb jEqtFdAkNVwTxVi3OjMWs6liLBmkaskx2m9AXorsA7MXS6msuWhFmzuElJCt8KID DPUgEx9ny90SlCY3+FDz922v6cw4b4AU/z6Bf8ZBbf3cr9VcDOnq/W9D1NeOCfqb NXBHDIbjCNmQgR2vcfpDPW1tDk36xJdSOfIzWSlg8ZpMGWBe8Xnla5rpTTH4zaVq shMhLxzV1VTQoyrwsyvUbC7g7CssEBh7v+rIhdA0h59cBniMKanGTffAXEBzgXnl 39kMicu7jX8vLn6HRgmOUrSdr4KgXKzhuW4GfCe/5dBh+2RnnUTn+iUVdj4xts/X SwODT0XT5FOofVh2hZYZMZK3MnFa/P401vOENMH3OiY3hYHBJdrO3JtPz9n+vxUF bA4rhwvSuBTsLjyJC/8qTLU3sgfCIHl9pBGVlMeRb2yt+7+EAJ6WDEr3LBdIrh9P 6obhtG3zbQsplpVLwh7MbxuPcZT3u2pBX7ME9zfNWMKltwKKSPho/Bt72G8w2YNi VApxTfc6HKbWzJoCk04= =tXff -----END PGP SIGNATURE----- Merge tag 'Smack-for-6.14' of https://github.com/cschaufler/smack-next Pull smack update from Casey Schaufler: "One minor code improvement for v6.14" * tag 'Smack-for-6.14' of https://github.com/cschaufler/smack-next: smack: deduplicate access to string conversion |
||
|
Linus Torvalds
|
0ca0cf9f8c |
integrity-v6.14
-----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZ4rmvxQcem9oYXJAbGlu dXguaWJtLmNvbQAKCRDLwZzRsCrn5avvAP4tzjNdVp3tFeq9bA8gQZEJ74E6q/6a Qb18xTn54hxGXAEAuotzwJiandLBk/3hkHIE0BbyzmULiVMpos4qVuUmTwI= =ZvaD -----END PGP SIGNATURE----- Merge tag 'integrity-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "There's just a couple of changes: two kernel messages addressed, a measurement policy collision addressed, and one policy cleanup. Please note that the contents of the IMA measurement list is potentially affected. The builtin tmpfs IMA policy rule change might introduce additional measurements, while detecting a reboot might eliminate some measurements" * tag 'integrity-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: ignore suffixed policy rule comments ima: limit the builtin 'tcb' dont_measure tmpfs policy rule ima: kexec: silence RCU list traversal warning ima: Suspend PCR extends and log appends when rebooting |
||
|
Linus Torvalds
|
7dd457a2fd |
chrome-platform-firmware: Updates for v6.14
* Cleanups - Constify 'struct bin_attribute'. -----BEGIN PGP SIGNATURE----- iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZ42j7hMcdHp1bmdiaUBr ZXJuZWwub3JnAAoJECvFMQYG2jz0t7gA/2uh6vvU11p5ajweoj7nUbM2/CPNxFtT quB5X746ZjCOAP9u5Iwsys2k8SLdRX0S+Kzfn1MHJ1f8SMAwN1JN9FvGAg== =ZPhP -----END PGP SIGNATURE----- Merge tag 'chrome-platform-firmware-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform firmware updates from Tzung-Bi Shih: - Constify 'struct bin_attribute'. * tag 'chrome-platform-firmware-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: firmware: google: vpd: Use const 'struct bin_attribute' callback firmware: google: memconsole: Use const 'struct bin_attribute' callback firmware: google: gsmi: Constify 'struct bin_attribute' firmware: google: cbmem: Constify 'struct bin_attribute' |
||
|
Linus Torvalds
|
b394eabd53 |
chrome-platform: Updates for v6.14
* New
- Support new EC if the memory region information comes from the CRS
ACPI resource descriptor in cros_ec_lpc.
* Improvements
- Make sure EC is in RW before probing.
- Only check events on MKBP notifies to reduce the number of query
commands in cros_ec_lpc.
* Cleanups
- Remove unused code and DT bindings for cros-kbd-led-backlight.
- Constify 'struct bin_attribute' in cros_ec_vbc.
- Use str_enabled_disabled() in cros_usbpd_logger.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZ42qHBMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0t4IA/11B/3WZgVdM4xHNd5w16Lhs7BrfDilS
1Q6BNVUg8SuSAP0SF7w5/ogV8Cxljwtnob8+ZKp+29O7ByTb0eryHZzaBQ==
=nimw
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Support new EC if the memory region information comes from the CRS
ACPI resource descriptor in cros_ec_lpc
Improvements:
- Make sure EC is in RW before probing
- Only check events on MKBP notifies to reduce the number of query
commands in cros_ec_lpc
Cleanups:
- Remove unused code and DT bindings for cros-kbd-led-backlight
- Constify 'struct bin_attribute' in cros_ec_vbc
- Use str_enabled_disabled() in cros_usbpd_logger"
* tag 'chrome-platform-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_lpc: Handle EC without CRS section
platform/chrome: cros_usbpd_logger: Use str_enabled_disabled() helper
platform/chrome: cros_ec_lpc: Support direct EC register memory access
platform/chrome: cros_ec_lpc: Merge lpc_driver_ops into ec private structure
platform/chrome: Update ChromeOS EC command tracing
platform/chrome: cros_ec_lpc: Only check for events on MKBP notifies
platform/chrome: cros_ec_vbc: Constify 'struct bin_attribute'
dt-bindings: cros-ec: Remove google,cros-kbd-led-backlight
platform/chrome: cros_kbd_led_backlight: Remove OF match
platform/chrome: cros_ec_proto: remove unnecessary retries
platform/chrome: cros_ec: jump to RW before probing
platform/chrome: cros_kbd_led_backlight: remove unneeded if-statement
|
||
|
Linus Torvalds
|
d0f93ac2c3 |
Documentation changes this time around include:
- Quite a bit of Chinese and Spanish translation work. - Clarifying that Git commit IDs >12chars are OK - A new nvme-multipath document - A reorganization of the admin-guide top-level page to make it readable - Clarification of the role of Acked-by and maintainer discretion on their acceptance. - Some reorganization of debugging-oriented docs. ...and typo fixes, documentation updates, etc. as usual. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmeOp8EPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YipUH/iffvlVYuqoVdPUFWdmsiNjwOCRE2MIfp8qO tPTRRHJAny+NlFT0IWlGUbLNoNXtvpN47YlkaeAjdrsjASerfpwzje7t4Z1B+jWT 0YwGBCvDIGasfRCx7D14+w5aqkEEynfsy+QurwcuDxcHMQGwt7ZCuTNOVO6BULEr L++BMwqapUr5IemP4ItQqDVVF9sp6bWEhaOnTTJCLU6oG23uUSSA/59sJmwDJUk7 6J3VGO1An4Jte9WX7qkVrSBNO5cOOhaFiFXIeNxfOioOPctBwxKiHDJnzVud8ipz R+tnUI/8hEvyJ7GZFezyZxmMnFs0P2DEYAkaN+hBs/nUjx0dKUg= =YxaS -----END PGP SIGNATURE----- Merge tag 'docs-6.14' of git://git.lwn.net/linux Pull Documentation updates from Jonathan Corbet: - Quite a bit of Chinese and Spanish translation work - Clarifying that Git commit IDs >12chars are OK - A new nvme-multipath document - A reorganization of the admin-guide top-level page to make it readable - Clarification of the role of Acked-by and maintainer discretion on their acceptance - Some reorganization of debugging-oriented docs ... and typo fixes, documentation updates, etc as usual * tag 'docs-6.14' of git://git.lwn.net/linux: (50 commits) Documentation: Fix x86_64 UEFI outdated references to elilo Documentation/sysctl: Add timer_migration to kernel.rst docs/mm: Physical memory: Remove zone_t docs: submitting-patches: clarify that signers may use their discretion on tags docs: submitting-patches: clarify difference between Acked-by and Reviewed-by docs: submitting-patches: clarify Acked-by and introduce "# Suffix" Documentation: bug-hunting.rst: remove odd contact information docs/zh_CN: Add sak index Chinese translation doc: module: DEFAULT_SYMBOL_NAMESPACE must be defined before #includes doc: module: Fix documented type of namespace Documentation/kernel-parameters: Fix a reference to vga-softcursor.rst docs/zh_CN: Add landlock index Chinese translation Documentation: Fix typo localmodonfig -> localmodconfig overlayfs.rst: Fix and improve grammar docs/zh_CN: Add siphash index Chinese translation docs/zh_CN: Add security IMA-templates Chinese translation docs/zh_CN: Add security digsig Chinese translation Align git commit ID abbreviation guidelines and checks docs: process: submitting-patches: split canonical patch format section docs/zh_CN: Add security lsm Chinese translation ... |
||
|
Linus Torvalds
|
e3610441d1 |
Rust changes for v6.14
Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a few
cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using only
stable Rust features. In particular, previously we were using the
unstable features 'coerce_unsized', 'dispatch_from_dyn' and 'unsize',
and now we will use the new 'derive_coerce_pointee' one, which is on
track to stabilization. This new feature is a macro that essentially
expands into code that internally uses the unstable features that we
were using before, without having to expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'.
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups.
-----BEGIN PGP SIGNATURE-----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=VLNX
-----END PGP SIGNATURE-----
Merge tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a
few cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using
only stable Rust features. In particular, previously we were using
the unstable features 'coerce_unsized', 'dispatch_from_dyn' and
'unsize', and now we will use the new 'derive_coerce_pointee' one,
which is on track to stabilization. This new feature is a macro
that essentially expands into code that internally uses the
unstable features that we were using before, without having to
expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups"
* tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (32 commits)
kbuild: rust: add PROCMACROLDFLAGS
rust: uaccess: generalize userSliceReader to support any Vec
rust: kernel: add improved version of `ForeignOwnable::borrow_mut`
rust: kernel: reorder `ForeignOwnable` items
rust: kernel: change `ForeignOwnable` pointer to mut
rust: arc: split unsafe block, add missing comment
rust: types: avoid `as` casts
rust: arc: use `NonNull::new_unchecked`
rust: use derive(CoercePointee) on rustc >= 1.84.0
rust: alloc: add doctest for `ArrayLayout::new()`
rust: init: update `stack_try_pin_init` examples
rust: error: import `kernel`'s `LayoutError` instead of `core`'s
rust: str: replace unwraps with question mark operators
rust: page: remove unnecessary helper function from doctest
rust: rbtree: remove unwrap in asserts
rust: init: replace unwraps with question mark operators
rust: use host dylib naming convention to support macOS
rust: add `build_error!` to the prelude
rust: kernel: move `build_error` hidden function to prevent mistakes
rust: use the `build_error!` macro, not the hidden function
...
|
||
|
Linus Torvalds
|
1d6d399223 |
Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never execute
relevant code on any other CPU. This is currently handled by smpboot
code which takes care of CPU-hotplug operations. Affinity here is
a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and can't
run anywhere else. The affinity is set through kthread_bind_mask()
and the subsystem takes care by itself to handle CPU-hotplug
operations. Affinity here is assumed to be a correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node. This
is not a correctness constraint but merely a preference in terms of
memory locality. kswapd and kcompactd both fall into this category.
The affinity is set manually like for any other task and CPU-hotplug
is supposed to be handled by the relevant subsystem so that the task
is properly reaffined whenever a given CPU from the node comes up.
Also care should be taken so that the node affinity doesn't cross
isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its own
ad-hoc way.
This is an infrastructure proposal to handle this with the following API
changes:
_ kthread_create_on_node() automatically affines the created kthread to
its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called right
after kthread_create_on_node() to specify a preferred affinity
different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine
to the housekeeping CPUs (which means to all online CPUs most of the
time or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
* Consolidate a bunch of ad-hoc implementations of kthread_run_on_cpu()
* Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
* Add some correctness check to ensure kthread_bind() is always called
before the first kthread wake up.
* Default affine kthread to its preferred node.
* Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
* Implement kthreads preferred affinity
* Unify kthread worker and kthread API's style
* Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation.
-----BEGIN PGP SIGNATURE-----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=g8In
-----END PGP SIGNATURE-----
Merge tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
|
||
|
Linus Torvalds
|
96c84703f1 |
drm next for 6.14-rc1
core: - device memory cgroup controller added - Remove driver date from drm_driver - Add drm_printer based hex dumper - drm memory stats docs update - scheduler documentation improvements new driver: - amdxdna - Ryzen AI NPU support connector: - add a mutex to protect ELD - make connector setup two-step panels: - Introduce backlight quirks infrastructure - New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00, - Multi-Inno Technology MI1010Z1T-1CP11 bridge: - ti-sn65dsi83: Add ti,lvds-vod-swing optional properties - Provide default implementation of atomic_check for HDMI bridges - it605: HDCP improvements, MCCS Support xe: - make OA buffer size configurable - GuC capture fixes - add ufence and g2h flushes - restore system memory GGTT mappings - ioctl fixes - SRIOV PF scheduling priority - allow fault injection - lots of improvements/refactors - Enable GuC's WA_DUAL_QUEUE for newer platforms - IRQ related fixes and improvements i915: - More accurate engine busyness metrics with GuC submission - Ensure partial BO segment offset never exceeds allowed max - Flush GuC CT receive tasklet during reset preparation - Some DG2 refactor to fix DG2 bugs when operating with certain CPUs - Fix DG1 power gate sequence - Enabling uncompressed 128b/132b UHBR SST - Handle hdmi connector init failures, and no HDMI/DP cases - More robust engine resets on Haswell and older i915/xe display: - HDCP fixes for Xe3Lpd - New GSC FW ARL-H/ARL-U - support 3 VDSC engines 12 slices - MBUS joining sanitisation - reconcile i915/xe display power mgmt - Xe3Lpd fixes - UHBR rates for Thunderbolt amdgpu: - DRM panic support - track BO memory stats at runtime - Fix max surface handling in DC - Cleaner shader support for gfx10.3 dGPUs - fix drm buddy trim handling - SDMA engine reset updates - Fix doorbell ttm cleanup - RAS updates - ISP updates - SDMA queue reset support - Rework DPM powergating interfaces - Documentation updates and cleanups - DCN 3.5 updates - Use a pm notifier to more gracefully handle VRAM eviction on suspend or hibernate - Add debugfs interfaces for forcing scheduling to specific engine instances - GG 9.5 updates - IH 4.4 updates - Make missing optional firmware less noisy - PSP 13.x updates - SMU 13.x updates - VCN 5.x updates - JPEG 5.x updates - GC 12.x updates - DC FAMS updates amdkfd: - GG 9.5 updates - Logging improvements - Shader debugger fixes - Trap handler cleanup - Cleanup includes - Eviction fence wq fix msm: - MDSS: - properly described UBWC registers - added SM6150 (aka QCS615) support - DPU: - added SM6150 (aka QCS615) support - enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane) - added CWB hardware blocks support - DSI: - added SM6150 (aka QCS615) support - GPU: - Print GMU core fw version - GMU bandwidth voting for a740 and a750 - Expose uche trap base via uapi - UAPI error reporting rcar-du: - Add r8a779h0 Support ivpu: - Fix qemu crash when using passthrough nouveau: - expose GSP-RM logging buffers via debugfs panfrost: - Add MT8188 Mali-G57 MC3 support rockchip: - Gamma LUT support hisilicon: - new HIBMC support virtio-gpu: - convert to helpers - add prime support for scanout buffers v3d: - Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL vc4: - Add support for BCM2712 vkms: - line-per-line compositing algorithm to improve performance zynqmp: - Add DP audio support mediatek: - dp: Add sdp path reset - dp: Support flexible length of DP calibration data etnaviv: - add fdinfo memory support - add explicit reset handling -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmeJ5qYACgkQDHTzWXnE hr4o+w/9EbijDfyf8GCj4Qaxov8nZ3KEMW8LLmrYO3epfLsniX+nv01oNdbRXBjl QcsKixAvkyfLl61RuPnwbYiSJfxgwZ5K8rke7cshwlMB7zl7xZ+GZRoAmJlnokS4 uhmclCriW5nfKRNAGUPcj/ReGZeyHwqvGZn3jyuShkIFpE4rDope4DQsTzm/zs/i +cKyRAFm86EIdTACr9DVtb1L5uNZOnHDkufRH5EZr/7CWFco1krLxb/r4cvFaiIO GiDaLvXKXKwzQ6NeIWWCEU2zTBz0BluI8ggxp1+WlDiYgLDWtCBpBNPAoNJO/iQS J+E8bsk2b/aCLSJQgxcK0y80CXpoJyALaqStdHUqxuWv3/o0g8lFUJlfJVCNPIsg o4mBkdbgkzkHCPxUbie7uQIx+2DIsEiwWC/YGBeRx49qEYsLWyFHf6JR8j9aHCQq eGanaubzR+W2AC81yktd3rcxpmX5kq8n6ax3ZtS9wnio8iyB5jBDM8QeFSAE/vXV B5TT1nneh+HXJ6bTwZBFXkiq2JRxUdbZIS5oQLh0zixVthBMISSsYhJ222nH1bC4 DWIS2ggqSgqkb0WsE29CJyhJ1fPmS3v7lBXqPvjmN5vMto4gGOJAEgT6CiDpGFIz zXzNfrirr1r95iSST4PnYVOOkfK3t9gvbWMXgkr0wygtxyoxHzk= =5FIc -----END PGP SIGNATURE----- Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "There are two external interactions of note, the msm tree pull in some opp tree, hopefully the opp tree arrives from the same git tree however it normally does. There is also a new cgroup controller for device memory, that is used by drm, so is merging through my tree. This will hopefully help open up gpu cgroup usage a bit more and move us forward. There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs. Then the usual xe/amdgpu/i915/msm leaders and lots of changes and refactors across the board: core: - device memory cgroup controller added - Remove driver date from drm_driver - Add drm_printer based hex dumper - drm memory stats docs update - scheduler documentation improvements new driver: - amdxdna - Ryzen AI NPU support connector: - add a mutex to protect ELD - make connector setup two-step panels: - Introduce backlight quirks infrastructure - New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00, - Multi-Inno Technology MI1010Z1T-1CP11 bridge: - ti-sn65dsi83: Add ti,lvds-vod-swing optional properties - Provide default implementation of atomic_check for HDMI bridges - it605: HDCP improvements, MCCS Support xe: - make OA buffer size configurable - GuC capture fixes - add ufence and g2h flushes - restore system memory GGTT mappings - ioctl fixes - SRIOV PF scheduling priority - allow fault injection - lots of improvements/refactors - Enable GuC's WA_DUAL_QUEUE for newer platforms - IRQ related fixes and improvements i915: - More accurate engine busyness metrics with GuC submission - Ensure partial BO segment offset never exceeds allowed max - Flush GuC CT receive tasklet during reset preparation - Some DG2 refactor to fix DG2 bugs when operating with certain CPUs - Fix DG1 power gate sequence - Enabling uncompressed 128b/132b UHBR SST - Handle hdmi connector init failures, and no HDMI/DP cases - More robust engine resets on Haswell and older i915/xe display: - HDCP fixes for Xe3Lpd - New GSC FW ARL-H/ARL-U - support 3 VDSC engines 12 slices - MBUS joining sanitisation - reconcile i915/xe display power mgmt - Xe3Lpd fixes - UHBR rates for Thunderbolt amdgpu: - DRM panic support - track BO memory stats at runtime - Fix max surface handling in DC - Cleaner shader support for gfx10.3 dGPUs - fix drm buddy trim handling - SDMA engine reset updates - Fix doorbell ttm cleanup - RAS updates - ISP updates - SDMA queue reset support - Rework DPM powergating interfaces - Documentation updates and cleanups - DCN 3.5 updates - Use a pm notifier to more gracefully handle VRAM eviction on suspend or hibernate - Add debugfs interfaces for forcing scheduling to specific engine instances - GG 9.5 updates - IH 4.4 updates - Make missing optional firmware less noisy - PSP 13.x updates - SMU 13.x updates - VCN 5.x updates - JPEG 5.x updates - GC 12.x updates - DC FAMS updates amdkfd: - GG 9.5 updates - Logging improvements - Shader debugger fixes - Trap handler cleanup - Cleanup includes - Eviction fence wq fix msm: - MDSS: - properly described UBWC registers - added SM6150 (aka QCS615) support - DPU: - added SM6150 (aka QCS615) support - enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane) - added CWB hardware blocks support - DSI: - added SM6150 (aka QCS615) support - GPU: - Print GMU core fw version - GMU bandwidth voting for a740 and a750 - Expose uche trap base via uapi - UAPI error reporting rcar-du: - Add r8a779h0 Support ivpu: - Fix qemu crash when using passthrough nouveau: - expose GSP-RM logging buffers via debugfs panfrost: - Add MT8188 Mali-G57 MC3 support rockchip: - Gamma LUT support hisilicon: - new HIBMC support virtio-gpu: - convert to helpers - add prime support for scanout buffers v3d: - Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL vc4: - Add support for BCM2712 vkms: - line-per-line compositing algorithm to improve performance zynqmp: - Add DP audio support mediatek: - dp: Add sdp path reset - dp: Support flexible length of DP calibration data etnaviv: - add fdinfo memory support - add explicit reset handling" * tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits) drm/bridge: fix documentation for the hdmi_audio_prepare() callback doc/cgroup: Fix title underline length drm/doc: Include new drm-compute documentation cgroup/dmem: Fix parameters documentation cgroup/dmem: Select PAGE_COUNTER kernel/cgroup: Remove the unused variable climit drm/display: hdmi: Do not read EDID on disconnected connectors drm/tests: hdmi: Add connector disablement test drm/connector: hdmi: Do atomic check when necessary drm/amd/display: 3.2.316 drm/amd/display: avoid reset DTBCLK at clock init drm/amd/display: improve dpia pre-train drm/amd/display: Apply DML21 Patches drm/amd/display: Use HW lock mgr for PSR1 drm/amd/display: Revised for Replay Pseudo vblank control drm/amd/display: Add a new flag for replay low hz drm/amd/display: Remove unused read_ono_state function from Hwss module drm/amd/display: Do not elevate mem_type change to full update drm/amd/display: Do not wait for PSR disable on vbl enable drm/amd/display: Remove unnecessary eDP power down ... |
||
|
Linus Torvalds
|
c0e75905ca |
Updates to scipts/sorttable for 6.14:
The sorttable.c was a copy from recordmcount.c which is very hard to maintain. That's because it uses macro helpers and places the code in a header file sorttable.h to handle both the 64 bit and 32 bit version of the Elf structures. It also uses _r()/r()/r2() wrappers around accessing the data which will read the 64 bit or 32 bit version of the data as well as handle endianess. If the wrong wrapper is used, an invalid value will result, and this has been a cause for bugs in the past. In fact the new ORC code doesn't even use it. That's fine because ORC is only for 64 bit x86 which is the default parsing. Instead of having a bunch of macros defined and then include the code twice from a header, the Elf structures are each wrapped in a union. The union holds the 64 bit and 32 bit version of the needed structure. Then a structure of function pointers is used, along with helper macros to access the ELF types appropriately for their byte size and endianess. How to reference the data fields is moved from the code that implements the sorting to the helper functions where all accesses to a field will use he same helper function. As long as the helper functions access the fields correctly, the code will also access the fields. This is an improvement over having to code implementing the sorting having to make sure it always uses the right accessor function when reading an ELF field. This is a clean up only, the functionality of the scripts/sorttable.c does not change. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5AO2RQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qj6pAQDAHA3mtawVYgq/Kw8OAc6r2NLP5Q58 8nptwPVoATomLgEA2HO38cu1N8Fxg+zMgQ4L9eYfa0QdE3XKD0WNbG4x7wE= =go8s -----END PGP SIGNATURE----- Merge tag 'trace-sorttable-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull scipts/sorttable updates from Steven Rostedt: "The sorttable.c was a copy from recordmcount.c which is very hard to maintain. That's because it uses macro helpers and places the code in a header file sorttable.h to handle both the 64 bit and 32 bit version of the Elf structures. It also uses _r()/r()/r2() wrappers around accessing the data which will read the 64 bit or 32 bit version of the data as well as handle endianess. If the wrong wrapper is used, an invalid value will result, and this has been a cause for bugs in the past. In fact the new ORC code doesn't even use it. That's fine because ORC is only for 64 bit x86 which is the default parsing. Instead of having a bunch of macros defined and then include the code twice from a header, the Elf structures are each wrapped in a union. The union holds the 64 bit and 32 bit version of the needed structure. Then a structure of function pointers is used, along with helper macros to access the ELF types appropriately for their byte size and endianess. How to reference the data fields is moved from the code that implements the sorting to the helper functions where all accesses to a field will use he same helper function. As long as the helper functions access the fields correctly, the code will also access the fields. This is an improvement over having to code implementing the sorting having to make sure it always uses the right accessor function when reading an ELF field. This is a clean up only, the functionality of the scripts/sorttable.c does not change" * tag 'trace-sorttable-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: scripts/sorttable: Use a structure of function pointers for elf helpers scripts/sorttable: Get start/stop_mcount_loc from ELF file directly scripts/sorttable: Move code from sorttable.h into sorttable.c scripts/sorttable: Use uint64_t for mcount sorting scripts/sorttable: Add helper functions for Elf_Sym scripts/sorttable: Add helper functions for Elf_Shdr scripts/sorttable: Add helper functions for Elf_Ehdr scripts/sorttable: Convert Elf_Sym MACRO over to a union scripts/sorttable: Replace Elf_Shdr Macro with a union scripts/sorttable: Convert Elf_Ehdr to union scripts/sorttable: Make compare_extable() into two functions scripts/sorttable: Have the ORC code use the _r() functions to read scripts/sorttable: Remove unneeded Elf_Rel scripts/sorttable: Remove unused write functions scripts/sorttable: Remove unused macro defines |
||
|
Linus Torvalds
|
2e04247f7c |
ftrace updates for v6.14:
- Have fprobes built on top of function graph infrastructure The fprobe logic is an optimized kprobe that uses ftrace to attach to functions when a probe is needed at the start or end of the function. The fprobe and kretprobe logic implements a similar method as the function graph tracer to trace the end of the function. That is to hijack the return address and jump to a trampoline to do the trace when the function exits. To do this, a shadow stack needs to be created to store the original return address. Fprobes and function graph do this slightly differently. Fprobes (and kretprobes) has slots per callsite that are reserved to save the return address. This is fine when just a few points are traced. But users of fprobes, such as BPF programs, are starting to add many more locations, and this method does not scale. The function graph tracer was created to trace all functions in the kernel. In order to do this, when function graph tracing is started, every task gets its own shadow stack to hold the return address that is going to be traced. The function graph tracer has been updated to allow multiple users to use its infrastructure. Now have fprobes be one of those users. This will also allow for the fprobe and kretprobe methods to trace the return address to become obsolete. With new technologies like CFI that need to know about these methods of hijacking the return address, going toward a solution that has only one method of doing this will make the kernel less complex. - Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Remove disabling of interrupts in the function graph tracer When function graph tracer was first introduced, it could race with interrupts and NMIs. To prevent that race, it would disable interrupts and not trace NMIs. But the code has changed to allow NMIs and also interrupts. This change was done a long time ago, but the disabling of interrupts was never removed. Remove the disabling of interrupts in the function graph tracer is it is not needed. This greatly improves its performance. - Allow the :mod: command to enable tracing module functions on the kernel command line. The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Because enabling function tracing can be done very early at boot up (before scheduling is enabled), the commands that can be done when function tracing is started is limited. Having the ":mod:" command to trace module functions as they are loaded is very useful. Update the kernel command line function filtering to allow it. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ42E2RQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qqXSAPwOMxuhye8tb1GYG62QD9+w7e6nOmlC 2GCPj4detnEM2QD/ciivkhespVKhHpZHRewAuSnJgHPSM45NQ3EVESzjWQ4= =snbx -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Have fprobes built on top of function graph infrastructure The fprobe logic is an optimized kprobe that uses ftrace to attach to functions when a probe is needed at the start or end of the function. The fprobe and kretprobe logic implements a similar method as the function graph tracer to trace the end of the function. That is to hijack the return address and jump to a trampoline to do the trace when the function exits. To do this, a shadow stack needs to be created to store the original return address. Fprobes and function graph do this slightly differently. Fprobes (and kretprobes) has slots per callsite that are reserved to save the return address. This is fine when just a few points are traced. But users of fprobes, such as BPF programs, are starting to add many more locations, and this method does not scale. The function graph tracer was created to trace all functions in the kernel. In order to do this, when function graph tracing is started, every task gets its own shadow stack to hold the return address that is going to be traced. The function graph tracer has been updated to allow multiple users to use its infrastructure. Now have fprobes be one of those users. This will also allow for the fprobe and kretprobe methods to trace the return address to become obsolete. With new technologies like CFI that need to know about these methods of hijacking the return address, going toward a solution that has only one method of doing this will make the kernel less complex. - Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Remove disabling of interrupts in the function graph tracer When function graph tracer was first introduced, it could race with interrupts and NMIs. To prevent that race, it would disable interrupts and not trace NMIs. But the code has changed to allow NMIs and also interrupts. This change was done a long time ago, but the disabling of interrupts was never removed. Remove the disabling of interrupts in the function graph tracer is it is not needed. This greatly improves its performance. - Allow the :mod: command to enable tracing module functions on the kernel command line. The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Because enabling function tracing can be done very early at boot up (before scheduling is enabled), the commands that can be done when function tracing is started is limited. Having the ":mod:" command to trace module functions as they are loaded is very useful. Update the kernel command line function filtering to allow it. * tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits) ftrace: Implement :mod: cache filtering on kernel command line tracing: Adopt __free() and guard() for trace_fprobe.c bpf: Use ftrace_get_symaddr() for kprobe_multi probes ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr Documentation: probes: Update fprobe on function-graph tracer selftests/ftrace: Add a test case for repeating register/unregister fprobe selftests: ftrace: Remove obsolate maxactive syntax check tracing/fprobe: Remove nr_maxactive from fprobe fprobe: Add fprobe_header encoding feature fprobe: Rewrite fprobe on function-graph tracer s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS tracing: Add ftrace_fill_perf_regs() for perf event tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs fprobe: Use ftrace_regs in fprobe exit handler fprobe: Use ftrace_regs in fprobe entry handler fgraph: Pass ftrace_regs to retfunc fgraph: Replace fgraph_ret_regs with ftrace_regs ... |
||
|
Linus Torvalds
|
0074adea39 |
ring-buffer changes for v6.14
- Clean up the __rb_map_vma() logic The logic of __rb_map_vma() has a error check with WARN_ON() that makes sure that the index does not go past the end of the array of buffers. The test in the loop pretty much guarantees that it will never happen, but since the relation of the variables used is a little complex, the WARN_ON() check was added. It was noticed that the array was dereferenced before this check and if the logic does break and for some reason the logic goes past the array, there will be an out of bounds access here. Move the access to after the WARN_ON(). - Consolidate how the ring buffer is determined to be empty Currently there's two ways that are used to determine if the ring buffer is empty. One relies on the status of the commit and reader pages and what was read, and the other is on what was written vs what was read. By using the number of entries (written) method, it can be used for reading events that are out of the kernel's control (what pKVM will use). Move to this method to make it easier to implement a pKVM ring buffer that the kernel can read. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ42XuRQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qn3GAQCOQ94vr88FSXb/azC9281iDGYC/KbJ 7J4dGv2rXHpoVAEAtXRXSXpG0mTIJ6TtgVKgMrIFAuT/AVo4EIUr2q/CsgA= =2G7c -----END PGP SIGNATURE----- Merge tag 'trace-ringbuffer-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull trace ring-buffer updates from Steven Rostedt: - Clean up the __rb_map_vma() logic The logic of __rb_map_vma() has a error check with WARN_ON() that makes sure that the index does not go past the end of the array of buffers. The test in the loop pretty much guarantees that it will never happen, but since the relation of the variables used is a little complex, the WARN_ON() check was added. It was noticed that the array was dereferenced before this check and if the logic does break and for some reason the logic goes past the array, there will be an out of bounds access here. Move the access to after the WARN_ON(). - Consolidate how the ring buffer is determined to be empty Currently there's two ways that are used to determine if the ring buffer is empty. One relies on the status of the commit and reader pages and what was read, and the other is on what was written vs what was read. By using the number of entries (written) method, it can be used for reading events that are out of the kernel's control (what pKVM will use). Move to this method to make it easier to implement a pKVM ring buffer that the kernel can read. * tag 'trace-ringbuffer-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Make reading page consistent with the code logic ring-buffer: Check for empty ring-buffer with rb_num_of_entries() |
||
|
Linus Torvalds
|
9f3ee94e70 |
RCU pull request for v6.14
This pull request contains the following branches:
fixes.2024.12.14a: Misc fixes, check if IRQs are disabled in rcu_exp_need_qs(),
instrument KCSAN exclusive-writer assertions, add extra WARN_ON_ONCE() check,
set the cpu_no_qs.b.exp under lock, warn if callback enqueued on offline CPU.
rcutorture.2024.12.14a: Torture-test updates, add rcutorture.preempt_duration kernel
module parameter, make the TREE03 scenario do preemption, improve pooling timeouts
for rcu_torture_writer(), improve output of "Failure/close-call rcutorture reader
segments", add some reader-state debugging checks, update doc of polled APIs, add
extra diagnostics for per-reader-segment preemption.
srcu.2024.12.14a: SRCU updates, improve doc for srcu_read_lock() in terms of return
value, fix typo in comments, remove redundant GP sequence checks in the
srcu_funnel_gp_start.
torture-test.2024.12.14a: Add an extra test for sched_clock(), improve testing
on unresponsive systems.
-----BEGIN PGP SIGNATURE-----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=EwPt
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Uladzislau Rezki:
"Misc fixes:
- check if IRQs are disabled in rcu_exp_need_qs()
- instrument KCSAN exclusive-writer assertions
- add extra WARN_ON_ONCE() check
- set the cpu_no_qs.b.exp under lock
- warn if callback enqueued on offline CPU
Torture-test updates:
- add rcutorture.preempt_duration kernel module parameter
- make the TREE03 scenario do preemption
- improve pooling timeouts for rcu_torture_writer()
- improve output of "Failure/close-call rcutorture reader segments"
- add some reader-state debugging checks
- update doc of polled APIs
- add extra diagnostics for per-reader-segment preemption
- add an extra test for sched_clock()
- improve testing on unresponsive systems
SRCU updates:
- improve doc for srcu_read_lock() in terms of return value
- fix typo in comments
- remove redundant GP sequence checks in the srcu_funnel_gp_start"
* tag 'rcu.release.v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (31 commits)
srcu: Remove redundant GP sequence checks in srcu_funnel_gp_start
srcu: Fix typo s/srcu_check_read_flavor()/__srcu_check_read_flavor()/
srcu: Guarantee non-negative return value from srcu_read_lock()
MAINTAINERS: Update RCU git tree
rcu: Add lockdep_assert_irqs_disabled() to rcu_exp_need_qs()
rcu: Add KCSAN exclusive-writer assertions for rdp->cpu_no_qs.b.exp
rcu: Make preemptible rcu_exp_handler() check idempotency
rcu: Replace open-coded rcu_exp_need_qs() from rcu_exp_handler() with call
rcu: Move rcu_report_exp_rdp() setting of ->cpu_no_qs.b.exp under lock
rcu: Make rcu_report_exp_cpu_mult() caller acquire lock
rcu: Report callbacks enqueued on offline CPU blind spot
rcutorture: Use symbols for SRCU reader flavors
rcutorture: Add per-reader-segment preemption diagnostics
rcutorture: Read CPU ID for decoration protected by both reader types
rcutorture: Add preempt_count() to rcutorture_one_extend_check() diagnostics
rcutorture: Add parameters to control polled/conditional wait interval
rcutorture: Add documentation for recent conditional and polled APIs
rcutorture: Ignore attempts to test preemption and forward progress
rcutorture: Make rcutorture_one_extend() check reader state
rcutorture: Pretty-print rcutorture reader segments
...
|
||
|
Linus Torvalds
|
ad37df3bcb |
slab updates for 6.14
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmeKYRMACgkQu+CwddJF iJoA7AgAmYRkT69PNvmrrlobHh5Y6L/fU+/uU2GwjKISbDBnYB1UpkwHcF+5ARFs W1xDLgXSAutJebG+uOB5/5W/+EciLrFTPBhJ4xsObwE76tuZBgK9Net+1tGy57Hs A4N5vxCrNXTIRSYa4+5wSrFfh8k9akXsXrQfPd2Qbp3GglIWPBj5adEW1K0kkiJ6 2VaSTzJ2c7woA7PRtLotlLAk/MeEMXuk9xiSF42aHrRqBfFZs2ZB960nVzvtPCKE NKaITfWrmc0nNYKBGtnJ2g9Q9QufUHfsHzteRIfFYhGB6Ju9LZHBOq6CTp9E8cDO vAiqPd1QQk13ZzNdU71ax6BOUe40Gg== =bE+u -----END PGP SIGNATURE----- Merge tag 'slab-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab updates from Vlastimil Babka: - Move the kfree_rcu() implementation from RCU to SLAB subsystem (Uladzislau Rezki) The kfree_rcu() implementation has been historically maintained in the RCU subsystem. At LSF/MM we agreed to move it to SLAB, where it more logically belongs. The batching is planned be more integrated with SLUB internals in the future, while using the RCU APIs like any other subsystem. - Fix for kernel-doc warning (Randy Dunlap) * tag 'slab-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab: fix kernel-doc func param names mm/slab: Move kvfree_rcu() into SLAB rcu/kvfree: Adjust a shrinker name rcu/kvfree: Adjust names passed into trace functions rcu/kvfree: Move some functions under CONFIG_TINY_RCU rcu/kvfree: Initialize kvfree_rcu() separately |
||
|
Linus Torvalds
|
4c551165e7 |
Updates for the interrupt subsystem:
- Consolidation of the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting. Some
interrupt chips require that affinity changes are made from the context
of handling an interrupt to avoid certain race conditions. For x86 this
was the default, but with interrupt remapping this requirement was
lifted and a flag was introduced which tells the core code that
affinity changes can be done in any context. Unrestricted affinity
changes are the default for the majority of interrupt chips. RISCV has
the requirement to add the deferred mode to one of it's interrupt
controllers, but with the original implementation this would require to
add the any context flag to all other RISC-V interrupt chips. That's
backwards, so reverse the logic and require that chips, which need the
deferred mode have to be marked accordingly. That avoids chasing the
'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmePkVITHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoRbQD/9bHVph/V9Ekl7JAX3aY4gG4JbRhOc7
dp1VAcHRhktRfoTztYRbjsbMu2nvZ58GKA8bkOS2jHSF/m3PbkIJfOhwk0YdIAoa
+kdy5yDgqCGfkqW43DN4Cr+CnzGjWMitw67tFp3fhwehMDpDjdt2L28IjtanSS0f
hO6FV7o65MWeJwxk4Isb2/nvkO+X23Lrp6RrWS8SXBnF9FFXxiPIg/fiOPTizhCh
1W/bSGxLLb9WwsVzmlGAKVFlXDij0QGaIUug2fdVZ63OsELXD7tJrLSPG133yk92
ppIa0s6BT4IBsfM00us4hG15PkLuJmP3yWWcoquG0rP8Wq58VOXiN6+rcJIyvB+5
mWceTH6IKfZGoRQKwXC7BxeBAIb147reiJtb06meq1/8ADIvzafiNy0c8x9i/UaV
QiyhPVENjaGCGDomZmJQqN7Yb02Wge1k8InQnodDrHxZNl/bX/B1Z8Bxd0n6hPHg
NSJXYif2AxgaddpohsdygqRDbT6SNyQdj7YjJFY5qAGJ3yFyJ4JB6WTqkWW4o1vH
3FVqdAnJmejAmmYSkah0Hkem2T5QASQmTWb93PLxiV6q+d0NM8stWAujjyVdIV/B
W4Uj9mQ20cz54TjLtxqX+A1k6KcqOWRgh1l2QbUlFsgsOP3V8yz47yqYdR9qMWlO
9kNEjI3sw+G/IQ==
=q4rj
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
- Consolidate the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting.
Some interrupt chips require that affinity changes are made from the
context of handling an interrupt to avoid certain race conditions.
For x86 this was the default, but with interrupt remapping this
requirement was lifted and a flag was introduced which tells the core
code that affinity changes can be done in any context. Unrestricted
affinity changes are the default for the majority of interrupt chips.
RISCV has the requirement to add the deferred mode to one of it's
interrupt controllers, but with the original implementation this
would require to add the any context flag to all other RISC-V
interrupt chips. That's backwards, so reverse the logic and require
that chips, which need the deferred mode have to be marked
accordingly. That avoids chasing the 'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
* tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set()
genirq/timings: Add kernel-doc for a function parameter
genirq: Remove IRQ_MOVE_PCNTXT and related code
x86/apic: Convert to IRQCHIP_MOVE_DEFERRED
genirq: Provide IRQCHIP_MOVE_DEFERRED
hexagon: Remove GENERIC_PENDING_IRQ leftover
ARC: Remove GENERIC_PENDING_IRQ
genirq: Remove handle_enforce_irqctx() wrapper
genirq: Make handle_enforce_irqctx() unconditionally available
irqchip/loongarch-avec: Add multi-nodes topology support
irqchip/ts4800: Replace seq_printf() by seq_puts()
irqchip/ti-sci-inta : Add module build support
irqchip/ti-sci-intr: Add module build support
irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function
irqchip: keystone: Use syscon_regmap_lookup_by_phandle_args
genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown
kexec: Consolidate machine_kexec_mask_interrupts() implementation
genirq: Reuse irq_thread_fn() for forced thread case
genirq: Move irq_thread_fn() further up in the code
|
||
|
Linus Torvalds
|
f200c315da |
Updates for timers and timekeeping:
- Just boring cleanups, typo and comment fixes and trivial optimizations -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmePk4QTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYodwdD/47AXDT4nkka0mAnWLgv9B8Lult71EC NVfZnqg6hWh/ru1a5Wmld1p8nmJc4524F9CrggMIVSp2u1q1n2iBTjU5wKSbKv5x Se4crYf2D+iJInXE8zpnAFouUL8ws4XaUls3Nw5BM2mrcOAPeYWpJSHroOSxFIwi yNLrGqW0rFczNQTS0hXki3GBjXrK2KdCVFetuu9RrUNGPvLspCUyN2A0TzXSupYP Tw7KC2i6lI15N3VTe0MQS9SXXeB7cJBIFK2r6KfNDjcdLrgtACs8eIg8rKqck+QH UcxW+bNYIvzt/Iw8x+pWvE5CMxEm+2FsbdXM77SFmRyBZ1UQ+QchI8ZKQ/fF0VnN 48jwUUmsUetl2nCM77cqP8FMWGmZUUlvBw/mUXDaJLdBkLRRyQWqQw7FMgQb6kGg J0XZN8iFRNkSmY8sdNIRR9ELFbbofb+O3dz0fZ1406zDQFvBfxUOB+r4hZot1zVO uz+mcScbNHp89GJnJmaClA9NQkItKH2KohAo5rLXtG1GBTqauobAuqG6dx/0JXPF FgEPqnsEVWKahBwASxsxdlNA7IhK+vmvBVQVpRnvS+RM/TPd88Da5dhqbQD3ZJ1k UwiFwvhVuci1XS+5IIchRiNFy/ZSm5w1N3PFKDOQe4L8FreTDuO7mlrAQMUy2Jk3 mXF5HwGON7a76A== =R/xW -----END PGP SIGNATURE----- Merge tag 'timers-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer and timekeeping updates from Thomas Gleixner: - Just boring cleanups, typo and comment fixes and trivial optimizations * tag 'timers-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers/migration: Simplify top level detection on group setup timers: Optimize get_timer_[this_]cpu_base() timekeeping: Remove unused ktime_get_fast_timestamps() timer/migration: Fix kernel-doc warnings for union tmigr_state tick/broadcast: Add kernel-doc for function parameters hrtimers: Update the return type of enqueue_hrtimer() clocksource/wdtest: Print time values for short udelay(1) posix-timers: Fix typo in __lock_timer() vdso: Correct typo in PAGE_SHIFT comment |
||
|
Linus Torvalds
|
336088234e |
Livepatching changes for 6.14
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmeOTvAACgkQUqAMR0iA lPKpahAAm4GqvxwQWowQmFAfdFW/1H++tADl2xCsPbmCPeKs1PBXCLTPfMDHNjWr zgHihsnJKIUQ0nUfthYrlEdYx15Ku86ucpl6p2gKBcOgpv31SG5iRbL99RnhEJ1C oeIx0XR83Imy9TnRzo0/X0MPYQAUSAEiY0oHENGBFjJpepopG61op/snacbG26AS yibEvJKOYQ3r3xPkbwp8zZ+vyblYJ7X9Tdq1/DX1Iuksz2f7sRS72XJxdjJC7QFQ 8Gyh88kbtasPmiPGOO0zRc0IMzGk0VVFa1b1zwReab7/aQKzPqAX7KQhwb4Q9JPV RuzEb3HE9v+usY1JEiW2JZijM2QXt+SYOgx0/ki7/tDKGb3c5HbVoOyhVwK2bfw7 z86/Vze3w9iLz9i2dVCmwobbZGicrBGHhejahYA8NhpGH49HRR7p5O9Nw22QgCpk ADBD2nfajDBzDTOu+s8OkQk4jPQk69LtXM9BO/nq88f5BlKOIMAY+AofPwCZj+ab KHQEDC6E+Xg03xYUGVZpek4TnpF7T9tWSc7eWGg53YQPMcgj54rR7LXzNK2dO4mP ugRC1qNUCKvjzQ5bMsCEhLhJqrszP975HSuSXIFBSzw1fNS5QNmxKepxfuCxjl08 9ZARNW3Q0mzqge7R5NeIQTcKYa/60d7cxJlWjdYHTiW5HE/xNx0= =UeIx -----END PGP SIGNATURE----- Merge tag 'livepatching-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Petr Mladek: - Add a sysfs attribute showing the livepatch ordering - Some code clean up * tag 'livepatching-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: selftests: livepatch: add test cases of stack_order sysfs interface livepatch: Add stack_order sysfs attribute selftests/livepatch: Replace hardcoded module name with variable in test-callbacks.sh |
||
|
Linus Torvalds
|
4ca6c02227 |
printk changes for 6.14
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmeORHsACgkQUqAMR0iA lPK3QA/7BW55HLdbo0SlQfAQGM0u7WGYzCV1158POdwM5tL0Uj2j8dNDUUr9MF/N vUX0TqcfzXmTWXuLCwVbbJR0yw0lHQqwU1CsuiAo63TtmgkNwXzJOowNNRmyabCb WaC9KqwD6IvCOJ87BWyrp737pMo9DmBmtkArT7hj2KA2idw70vzcNTiYQ4YVvEZg aihHPEdk1fD99QWmip876h16pWI5/yUwnccezGpxMETBWIJPXkMCKeqGkc3LpEyz 1+csCJFcOx26tKpPgz8wludQb3Dz3bSYhDyKk7xdb3XWtrtghMo0GETeQVM/KM72 /pc0YCYh6/ncxQOkmpwH/zV/yPBVfdy5CIqOy4SNyinVubiW8OLzFjb71Q+n5HGd 9O8nRGZ4BBH8+5Wih619fmx1xMb/W+aX0ehcMkl5k+ZoN3KhulQbfbUak524DnLE YxAEj8HuyRtdh+EKrNTl/7p1mT9a/oD3nHfBn2uDnmDMEveg+kcePG3mE2f8mKBX UwvCk6lzgD+WajOQdhAVWoVsct2Om7jMXSUp3jKc80F4RTso32UW3KXb43A4x10m l4Cq1erh86oNtCjGI/1KSOtPsSLFCWiNb+0gCxbS3WQvkjo+EGfXBUW9ZXYgCxkt S6cNt6IGAL3HxS7zYixBLUEEHohkvLAKrkcyowSQHMCHBit+oB4= =gGTl -----END PGP SIGNATURE----- Merge tag 'printk-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Prevent possible deadlocks, caused by the lock serializing per-CPU backtraces, by entering the deferred printk context - Enforce the right casting in LOG_BUF_LEN_MAX definition * tag 'printk-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Defer legacy printing when holding printk_cpu_sync printk: Remove redundant deferred check in vprintk() printk: Fix signed integer overflow when defining LOG_BUF_LEN_MAX |
||
|
Linus Torvalds
|
62de6e1685 |
Scheduler enhancements for v6.14:
- Fair scheduler (SCHED_FAIR) enhancements:
- Behavioral improvements:
- Untangle NEXT_BUDDY and pick_next_task() (Peter Zijlstra)
- Delayed-dequeue enhancements & fixes: (Vincent Guittot)
- Rename h_nr_running into h_nr_queued
- Add new cfs_rq.h_nr_runnable
- Use the new cfs_rq.h_nr_runnable
- Removed unsued cfs_rq.h_nr_delayed
- Rename cfs_rq.idle_h_nr_running into h_nr_idle
- Remove unused cfs_rq.idle_nr_running
- Rename cfs_rq.nr_running into nr_queued
- Do not try to migrate delayed dequeue task
- Fix variable declaration position
- Encapsulate set custom slice in a __setparam_fair() function
- Fixes:
- Fix race between yield_to() and try_to_wake_up() (Tianchen Ding)
- Fix CPU bandwidth limit bypass during CPU hotplug (Vishal Chourasia)
- Cleanups:
- Clean up in migrate_degrades_locality() to improve
readability (Peter Zijlstra)
- Mark m*_vruntime() with __maybe_unused (Andy Shevchenko)
- Update comments after sched_tick() rename (Sebastian Andrzej Siewior)
- Remove CONFIG_CFS_BANDWIDTH=n definition of cfs_bandwidth_used()
(Valentin Schneider)
- Deadline scheduler (SCHED_DL) enhancements:
- Restore dl_server bandwidth on non-destructive root domain
changes (Juri Lelli)
- Correctly account for allocated bandwidth during
hotplug (Juri Lelli)
- Check bandwidth overflow earlier for hotplug (Juri Lelli)
- Clean up goto label in pick_earliest_pushable_dl_task()
(John Stultz)
- Consolidate timer cancellation (Wander Lairson Costa)
- Load-balancer enhancements:
- Improve performance by prioritizing migrating eligible
tasks in sched_balance_rq() (Hao Jia)
- Do not compute NUMA Balancing stats unnecessarily during
load-balancing (K Prateek Nayak)
- Do not compute overloaded status unnecessarily during
load-balancing (K Prateek Nayak)
- Generic scheduling code enhancements:
- Use READ_ONCE() in task_on_rq_queued(), to consistently use
the WRITE_ONCE() updated ->on_rq field (Harshit Agarwal)
- Isolated CPUs support enhancements: (Waiman Long)
- Make "isolcpus=nohz" equivalent to "nohz_full"
- Consolidate housekeeping cpumasks that are always identical
- Remove HK_TYPE_SCHED
- Unify HK_TYPE_{TIMER|TICK|MISC} to HK_TYPE_KERNEL_NOISE
- RSEQ enhancements:
- Validate read-only fields under DEBUG_RSEQ config
(Mathieu Desnoyers)
- PSI enhancements:
- Fix race when task wakes up before psi_sched_switch()
adjusts flags (Chengming Zhou)
- IRQ time accounting performance enhancements: (Yafang Shao)
- Define sched_clock_irqtime as static key
- Don't account irq time if sched_clock_irqtime is disabled
- Virtual machine scheduling enhancements:
- Don't try to catch up excess steal time (Suleiman Souhlal)
- Heterogenous x86 CPU scheduling enhancements: (K Prateek Nayak)
- Convert "sysctl_sched_itmt_enabled" to boolean
- Use guard() for itmt_update_mutex
- Move the "sched_itmt_enabled" sysctl to debugfs
- Remove x86_smt_flags and use cpu_smt_flags directly
- Use x86_sched_itmt_flags for PKG domain unconditionally
- Debugging code & instrumentation enhancements:
- Change need_resched warnings to pr_err() (David Rientjes)
- Print domain name in /proc/schedstat (K Prateek Nayak)
- Fix value reported by hot tasks pulled in /proc/schedstat (Peter Zijlstra)
- Report the different kinds of imbalances in /proc/schedstat (Swapnil Sapkal)
- Move sched domain name out of CONFIG_SCHED_DEBUG (Swapnil Sapkal)
- Update Schedstat version to 17 (Swapnil Sapkal)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5ZNW
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduler (SCHED_FAIR) enhancements:
- Behavioral improvements:
- Untangle NEXT_BUDDY and pick_next_task() (Peter Zijlstra)
- Delayed-dequeue enhancements & fixes: (Vincent Guittot)
- Rename h_nr_running into h_nr_queued
- Add new cfs_rq.h_nr_runnable
- Use the new cfs_rq.h_nr_runnable
- Removed unsued cfs_rq.h_nr_delayed
- Rename cfs_rq.idle_h_nr_running into h_nr_idle
- Remove unused cfs_rq.idle_nr_running
- Rename cfs_rq.nr_running into nr_queued
- Do not try to migrate delayed dequeue task
- Fix variable declaration position
- Encapsulate set custom slice in a __setparam_fair() function
- Fixes:
- Fix race between yield_to() and try_to_wake_up() (Tianchen Ding)
- Fix CPU bandwidth limit bypass during CPU hotplug (Vishal
Chourasia)
- Cleanups:
- Clean up in migrate_degrades_locality() to improve readability
(Peter Zijlstra)
- Mark m*_vruntime() with __maybe_unused (Andy Shevchenko)
- Update comments after sched_tick() rename (Sebastian Andrzej
Siewior)
- Remove CONFIG_CFS_BANDWIDTH=n definition of cfs_bandwidth_used()
(Valentin Schneider)
Deadline scheduler (SCHED_DL) enhancements:
- Restore dl_server bandwidth on non-destructive root domain changes
(Juri Lelli)
- Correctly account for allocated bandwidth during hotplug (Juri
Lelli)
- Check bandwidth overflow earlier for hotplug (Juri Lelli)
- Clean up goto label in pick_earliest_pushable_dl_task() (John
Stultz)
- Consolidate timer cancellation (Wander Lairson Costa)
Load-balancer enhancements:
- Improve performance by prioritizing migrating eligible tasks in
sched_balance_rq() (Hao Jia)
- Do not compute NUMA Balancing stats unnecessarily during
load-balancing (K Prateek Nayak)
- Do not compute overloaded status unnecessarily during
load-balancing (K Prateek Nayak)
Generic scheduling code enhancements:
- Use READ_ONCE() in task_on_rq_queued(), to consistently use the
WRITE_ONCE() updated ->on_rq field (Harshit Agarwal)
Isolated CPUs support enhancements: (Waiman Long)
- Make "isolcpus=nohz" equivalent to "nohz_full"
- Consolidate housekeeping cpumasks that are always identical
- Remove HK_TYPE_SCHED
- Unify HK_TYPE_{TIMER|TICK|MISC} to HK_TYPE_KERNEL_NOISE
RSEQ enhancements:
- Validate read-only fields under DEBUG_RSEQ config (Mathieu
Desnoyers)
PSI enhancements:
- Fix race when task wakes up before psi_sched_switch() adjusts flags
(Chengming Zhou)
IRQ time accounting performance enhancements: (Yafang Shao)
- Define sched_clock_irqtime as static key
- Don't account irq time if sched_clock_irqtime is disabled
Virtual machine scheduling enhancements:
- Don't try to catch up excess steal time (Suleiman Souhlal)
Heterogenous x86 CPU scheduling enhancements: (K Prateek Nayak)
- Convert "sysctl_sched_itmt_enabled" to boolean
- Use guard() for itmt_update_mutex
- Move the "sched_itmt_enabled" sysctl to debugfs
- Remove x86_smt_flags and use cpu_smt_flags directly
- Use x86_sched_itmt_flags for PKG domain unconditionally
Debugging code & instrumentation enhancements:
- Change need_resched warnings to pr_err() (David Rientjes)
- Print domain name in /proc/schedstat (K Prateek Nayak)
- Fix value reported by hot tasks pulled in /proc/schedstat (Peter
Zijlstra)
- Report the different kinds of imbalances in /proc/schedstat
(Swapnil Sapkal)
- Move sched domain name out of CONFIG_SCHED_DEBUG (Swapnil Sapkal)
- Update Schedstat version to 17 (Swapnil Sapkal)"
* tag 'sched-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
rseq: Fix rseq unregistration regression
psi: Fix race when task wakes up before psi_sched_switch() adjusts flags
sched, psi: Don't account irq time if sched_clock_irqtime is disabled
sched: Don't account irq time if sched_clock_irqtime is disabled
sched: Define sched_clock_irqtime as static key
sched/fair: Do not compute overloaded status unnecessarily during lb
sched/fair: Do not compute NUMA Balancing stats unnecessarily during lb
x86/topology: Use x86_sched_itmt_flags for PKG domain unconditionally
x86/topology: Remove x86_smt_flags and use cpu_smt_flags directly
x86/itmt: Move the "sched_itmt_enabled" sysctl to debugfs
x86/itmt: Use guard() for itmt_update_mutex
x86/itmt: Convert "sysctl_sched_itmt_enabled" to boolean
sched/core: Prioritize migrating eligible tasks in sched_balance_rq()
sched/debug: Change need_resched warnings to pr_err
sched/fair: Encapsulate set custom slice in a __setparam_fair() function
sched: Fix race between yield_to() and try_to_wake_up()
docs: Update Schedstat version to 17
sched/stats: Print domain name in /proc/schedstat
sched: Move sched domain name out of CONFIG_SCHED_DEBUG
sched: Report the different kinds of imbalances in /proc/schedstat
...
|
||
|
Linus Torvalds
|
858df1de21 |
Miscellaneous x86 cleanups and typo fixes, and also the removal
of the "disablelapic" boot parameter. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmePTD8RHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jf5g//Wo1WKUXukRrBANr2nIlx9B7xJliRmUxv mJ0VKo49YPl6C34fjSHhBs3+nPbYD+CyWVKAz5PqkfkFRGBgpQi26EnyKaIhLVFW HWhW5vQm/FJfzBIrfFg7g/H1PK+rEYa4mv8JF9vhwp7BOfuqx4ABGKWQnrvOGg2B VivE5k7/kxWRPTg45Kgb1iwlS2gcfWCRi9qdCzdJgY/4XYE6k6hKeV0PgTT3Vojf pZKsgZRq8tzMaX75obtyyrX3TWj0nkRec0XbgyXBFvlFh/l3e0RswxzGGAjrC1XP R+qmscdCkczUwRGc1mGj9MoCqMRRffU6/hTNsjqu8o7Q2gzZzXWHcUc+X7UwOeKZ 2guxOj4iagdn7+mIso6uAjY+OOdFVw7/C8ysbCmwo3MiaDsfaK2NkdBoT2xDWuIw NP/45RMpTIsgL0wG6upzXXApKgYxfWhNSq+oHDF4/TjWY4i779hjMghvtX1BI7yb LXIh2SsRcnmEPl42UGaz6xmdmkulWZPPxI5rghixU48Eazkngfp7ZTHYpm5NFoRP Qc3JNcKo7rGmkoo/sA7uwawjnaTz/H77SDNjfAufzjVAKidvUqW6xaK/8JM1fq0n du+9sQN5MrAqdKx5Lu624s/7ektwkDeUdQFGazqS9y0GBT25T9Rw+LQDuec7BG3p v8sok4IaPA0= =Hzj3 -----END PGP SIGNATURE----- Merge tag 'x86-cleanups-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Miscellaneous x86 cleanups and typo fixes, and also the removal of the 'disablelapic' boot parameter" * tag 'x86-cleanups-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioapic: Remove a stray tab in the IO-APIC type string x86/cpufeatures: Remove "AMD" from the comments to the AMD-specific leaf Documentation/kernel-parameters: Fix a typo in kvm.enable_virt_at_load text x86/cpu: Fix typo in x86_match_cpu()'s doc x86/apic: Remove "disablelapic" cmdline option Documentation: Merge x86-specific boot options doc into kernel-parameters.txt x86/ioremap: Remove unused size parameter in remapping functions x86/ioremap: Simplify setup_data mapping variants x86/boot/compressed: Remove unused header includes from kaslr.c |
||
|
Linus Torvalds
|
6c4aa896eb |
Performance events changes for v6.14:
- Seqlock optimizations that arose in a perf context and were
merged into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount ((Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
- Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages
in advance (Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin Cui)
- Export perf_exclude_event() (Namhyung Kim)
- Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
- AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
- AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
- Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
- Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8XB
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Seqlock optimizations that arose in a perf context and were merged
into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount (Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren
Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages in advance
(Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin
Cui)
- Export perf_exclude_event() (Namhyung Kim)
Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids"
* tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
perf: map pages in advance
perf/x86/intel/uncore: Support more units on Granite Rapids
perf/x86/intel/uncore: Clean up func_id
perf/x86/intel: Support RDPMC metrics clear mode
uprobes: Guard against kmemdup() failing in dup_return_instance()
perf/x86: Relax privilege filter restriction on AMD IBS
perf/core: Export perf_exclude_event()
uprobes: Reuse return_instances between multiple uretprobes within task
uprobes: Ensure return_instance is detached from the list before freeing
uprobes: Decouple return_instance list traversal and freeing
uprobes: Simplify session consumer tracking
uprobes: add speculative lockless VMA-to-inode-to-uprobe resolution
uprobes: simplify find_active_uprobe_rcu() VMA checks
mm: introduce mmap_lock_speculate_{try_begin|retry}
mm: convert mm_lock_seq to a proper seqcount
mm/gup: Use raw_seqcount_try_begin()
seqlock: add raw_seqcount_try_begin
perf/x86/rapl: Add core energy counter support for AMD CPUs
perf/x86/rapl: Move the cntr_mask to rapl_pmus struct
perf/x86/rapl: Remove the global variable rapl_msrs
...
|