Only synchronize fbdev output to the vblank of an active CRTC. Go over
the list of CRTCs and pick the first that matches. Fixes warnings as
the one shown below
[ 77.201354] WARNING: drivers/gpu/drm/drm_vblank.c:1320 at drm_crtc_wait_one_vblank+0x194/0x1cc [drm], CPU#1: kworker/1:7/1867
[ 77.201354] omapdrm omapdrm.0: [drm] vblank wait timed out on crtc 0
This currently happens if the fbdev output is not on CRTC 0.
Atomic and non-atomic drivers require distinct code paths. As for other
fbdev operations, implement both and select the correct one at runtime.
Not finding an active CRTC is not a bug. Do not wait in this case, but
flush the display update as before.
v4:
- avoid possible deadlocks with locking context (Sashiko)
v3:
- drop excessive state validation (Jani)
- acquire plane and CRTC mutices (Sashiko)
v2:
- move look-up code into separate helper
- support drivers with legacy modesetting
v1:
- see https://lore.kernel.org/dri-devel/1c9e0e24-9c4a-4259-8700-cf9e5fd60ca3@suse.de/
Co-authored-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d8c4bddcd8 ("drm/fb-helper: Synchronize dirty worker with vblank")
Tested-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Closes: https://bugs.debian.org/1138033
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260702145021.226932-1-tzimmermann@suse.de
Closing a BO handle clears abo->client, while the underlying GEM object
may remain alive due to internal kernel references. As a result, code
executed after the BO handle is closed may dereference a NULL abo->client
pointer.
Remove accesses to abo->client from code paths that may execute after the
BO handle has been closed.
Fixes: d76856beb4 ("accel/amdxdna: Refactor GEM BO handling and add helper APIs for address retrieval")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707201556.562191-1-lizhi.hou@amd.com
The return value of init_srcu_struct() is currently ignored. If
initialization fails, subsequent use of hwctx_srcu may result in invalid
memory accesses.
Check the return value of init_srcu_struct() and propagate the error to
the caller.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707172323.539721-1-lizhi.hou@amd.com
drmm_mutex_init() may fail and return an error. Check the return value
and abort initialization if mutex creation fails.
Fixes: 8c9ff1b181 ("accel/amdxdna: Add a new driver for AMD AI Engine")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707172307.539676-1-lizhi.hou@amd.com
v3d_get_cpu_indirect_csd_params() looks up the indirect buffer object
from a userspace-supplied handle but never checks the result. A bogus
or stale handle makes drm_gem_object_lookup() return NULL, which is
then stored in info->indirect and only dereferenced later when the
indirect CSD job runs, turning a userspace mistake into a NULL pointer
dereference in the kernel.
Bail out with -ENOENT as soon as the lookup fails, so the bad handle is
rejected at submission time.
Fixes: 18b8413b25 ("drm/v3d: Create a CPU job extension for a indirect CSD job")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260703-v3d-cpu-job-fixes-v3-2-bc51b1f3eeb5@igalia.com
amdxdna_update_heap() iterates over hardware contexts while holding
xdna->dev_lock. During the iteration, amdxdna_pm_resume_get_locked() may
temporarily release and reacquire the lock, allowing hardware contexts to
be modified concurrently.
Fix the race by calling amdxdna_pm_resume_get_locked() before
iterating over hardware contexts.
Fixes: dbc8fd7a03 ("accel/amdxdna: Add expandable device heap support")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707055818.479165-1-lizhi.hou@amd.com
Both amdxdna_hwctx_sync_debug_bo() and amdxdna_drm_config_hwctx_ioctl()
hold xdna->dev_lock while invoking backend operations. If the hardware
hangs, aie2_cmd_wait() blocks waiting for a firmware response. When the
DRM scheduler timeout expires, aie2_sched_job_timedout() is invoked to
reset the hardware. However, the timeout handler also attempts to acquire
dev_lock, resulting in a deadlock.
Avoid this by releasing dev_lock before waiting for the firmware
response and reacquiring it after the wait completes. This allows the
timeout handler to proceed with device recovery when a debug BO command
times out.
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707055732.479103-1-lizhi.hou@amd.com
amdxdna_gem_obj_open() increments open_ref before attempting to set up
the DMA address mapping. When amdxdna_dma_map_bo() fails, the function
returned immediately without rolling back either change made on the first
open (open_ref == 1 path).
Fix it by decrementing open_ref and clearing abo->client on the error path.
Fixes: ece3e89809 ("accel/amdxdna: Allow forcing IOVA-based DMA via module parameter")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707055658.479049-1-lizhi.hou@amd.com
amdxdna_umap_release() calls the blocking mmu_interval_notifier_remove()
before removing the object from abo->mem.umap_list. If
aie2_populate_range() runs concurrently, it may obtain a reference to an
amdxdna_umap that is being released, leading to a potential use-after-free.
Use kref_get_unless_zero() in aie2_populate_range() when acquiring a
reference. If the reference count has already dropped to zero, release
is in progress and the entry is skipped.
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260706221228.434099-1-lizhi.hou@amd.com
The client cap is currently advertised unconditionally, even for drivers
that do not support plane color pipelines. If clients supporting the latter,
like Wayland compositors or tools like drm_info, enable the client cap on
such drivers they will be left without both color pipeline and the legacy
properties COLOR_ENCODING and COLOR_RANGE, effectively breaking YUV->RGB
conversion support.
Prevent that by only marking the cap supported if there are actually planes
with color pipelines.
Note: while the color pipeline replacement for the legacy properties is
still under review (1), we can assume that it will work as a drop-in
replacement. That means any plane on any hardware currently supporting
the legacy properties will be able to offer a functionally equal color
pipeline and there will be no technical reason keep using the legacy
properties if both the driver and the client support the new API.
[1] https://lore.kernel.org/dri-devel/20260623164812.81110-1-harry.wentland@amd.com/
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Fixes: 179ab8e7d7 ("drm/colorop: Introduce DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE")
Link: https://patch.msgid.link/20260703073230.19982-1-robert.mader@collabora.com
Suggested-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
aie2_populate_range() and amdxdna_umap_release() access a saved VMA
pointer that may have already been freed, leading to a potential
use-after-free.
Remove the VMA accesses from these functions to avoid the race.
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260609011242.2833740-1-lizhi.hou@amd.com
nr_pages is declared as u32 in amdxdna_hmm_register(), which may not be
large enough to represent the number of pages for large mappings.
Use unsigned long for nr_pages to avoid potential overflow.
Fixes: ac49797c18 ("accel/amdxdna: Add GEM buffer object management")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260616061532.3533469-1-lizhi.hou@amd.com
amdxdna_hwctx_sync_debug_bo() invokes the hardware hwctx_sync_debug_bo()
callback while holding xdna->dev_lock.
The callback may call amdxdna_cmd_submit(), which in turn calls
amdxdna_pm_resume_get(). If the device is suspended,
amdxdna_pm_resume_get() may synchronously execute amdxdna_pm_resume(),
which also acquires xdna->dev_lock, resulting in a deadlock.
Avoid the deadlock by calling amdxdna_pm_resume_get() before holding
xdna->dev_lock in both amdxdna_hwctx_sync_debug_bo() and
amdxdna_drm_config_hwctx_ioctl()
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260616212429.3620645-1-lizhi.hou@amd.com
VS/PE values returned by drm_dp_get_adjust_request_voltage() and
drm_dp_get_adjust_request_pre_emphasis() are already encoded to their
native DPCD register bit positions. However, DPCD_VOLTAGE_SWING_SET /
DPCD_PRE_EMPHASIS_SET macros perform an extra internal shift. Feeding
the raw offset-bearing values directly leads to overlapping bitfields
and invalid lane training configuration, causing link training failures
and black screen.
Add right shift using DP_TRAIN_*_SHIFT constants to strip the DPCD bit
offsets before passing values to the SET macros and subsequent checks.
Apply this fix for both clock recovery and adjust training code paths.
Reported-by: Vicente Bergas <vicencb@gmail.com>
Closes: https://lore.kernel.org/all/CAAMcf8D-d+5n=H44KeKBSqWY42m+o32W+mO-r15VqWNyYhJL7Q@mail.gmail.com/
Fixes: d84b087c76 ("drm/bridge: analogix_dp: Apply DP helper APIs to get adjusted voltages and pre-emphasises")
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/all/CAAMcf8D-d+5n=H44KeKBSqWY42m+o32W+mO-r15VqWNyYhJL7Q@mail.gmail.com/
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260623023506.309858-1-damon.ding@rock-chips.com
When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma)
which internally calls drm_gem_vm_close() → drm_gem_object_put(),
releasing the GEM object reference acquired at the start of the function.
However, the close_vma label then falls through to put_obj, which calls
drm_gem_object_put() a second time on the same object.
If the first put releases the last reference, the object is freed and the
second put accesses freed memory, causing a use-after-free.
Fix by returning directly from close_vma instead of falling through to
put_obj, since the close handler already performs all necessary cleanup
including the object put.
Cc: stable@vger.kernel.org
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260625113239.49764-1-vulab@iscas.ac.cn
pvr_set_uobj_array() copies an array of kernel objects to a userspace
array whose element size is described by out->stride. When out->stride
is different from the kernel object size, the slow path advances the
userspace pointer by the kernel object size and the kernel pointer by the
userspace stride.
This reverses the intended layout. For larger userspace strides, later
copies read from the wrong kernel addresses. For smaller userspace
strides, later copies are written at the wrong userspace offsets. The
padding clear is also done only for the first element instead of the
padding area for each element.
Advance the userspace pointer by out->stride and the kernel pointer by
obj_size, and clear per-element padding while the current userspace
pointer is still available.
Fixes: f99f5f3ea7 ("drm/imagination: Add GPU ID parsing and firmware loading")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Link: https://patch.msgid.link/6a456012.eb165e5c.113c2a.b71d@mx.google.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
For a few subtypes of DRM_IOCTL_PVR_DEV_QUERY, driver was overriding
the returned size unconditionally. This would have resulted in
increase of reported size beyond the amount of data returned to
userspace when args->size < size of query structure.
Updated behaviour matches with the description of
drm_pvr_ioctl_dev_query_args.size and written byte length.
None of the structures of DRM_IOCTL_PVR_DEV_QUERY changed after addition,
so change will not break any compatibility with earlier version.
Fixes: f99f5f3ea7 ("drm/imagination: Add GPU ID parsing and firmware loading")
Fixes: ff5f643de0 ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260701-b4-b4-query-v2-1-a1b491387875@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
When a debug BO command completes, job->drv_cmd may already have been
freed. Accessing it from aie2_sched_drvcmd_resp_handler() can result in
a use-after-free and memory corruption.
Fix this by introducing reference counting for drv_cmd objects and
transferring ownership to the job while it is in flight. This ensures
that the command remains valid until the completion handler finishes
processing it.
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260701155556.663541-1-lizhi.hou@amd.com
A hotplug or link-loss event can tear down the MST topology
(setting mgr->mst_state = false and mgr->mst_primary = NULL) concurrently
with a caller invoking drm_dp_mst_topology_queue_probe(). Since the check
is already performed under mgr->lock, the condition is not a programming
error but a valid race -- the topology was valid when the caller decided
to call this function, but was torn down before the lock was acquired.
Replace the drm_WARN_ON() with a graceful early return. This eliminates
spurious kernel warnings and the resulting compositor crashes observed
when connecting/disconnecting DP MST monitors, while keeping the correct
behavior of doing nothing when MST is not active. A drm_dbg_mst() trace
is added so the skipped probe remains observable under MST debug logging.
The existing WARN_ON(mgr->mst_primary) in drm_dp_mst_topology_mgr_set_mst()
already catches the case where the topology is initialized twice, so no
diagnostic coverage is lost.
Fixes: dbaeef363e ("drm/dp_mst: Add a helper to queue a topology probe")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Jonas Emilsson <jonas.emilsson@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/all/20260503034533.1023686-1-jonas.emilsson@gmail.com
Acked-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260622140532.526722-1-luciano.coelho@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
The autogenerated panthor_request_xx_irq() helpers unmask Mali
interrupts before we're sure we'll have a handler registered. For
non-shared IRQ lines, that's fine, but for shared ones, it might cause
an interrupt flood if the HW block raises an interrupt for any reason.
We could reworking the calls in panthor_request_xx_irq(), but it's just
simpler to let the caller decide when they are ready to handle interrupts
and call panthor_pwr_irq_resume() themselves. While at it, rework the
prototype to let users call panthor_pwr_irq_enable_events() explicitly
instead of passing an initial mask to panthor_request_pwr_irq().
Fixes: 5fe909cae1 ("drm/panthor: Add the device logical block")
Reported-by: Shashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260623-panthor-signal-from-irq-v3-0-2ece396f8ee0@collabora.com?part=3
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-11-b67ed973fea6@collabora.com
panthor_fw_unplug() is only called if we at least managed to initialize
the IRQ, so it's safe to drop the "is IRQ initialized" check.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-8-b67ed973fea6@collabora.com
We can't call panthor_pwr_irq_suspend() if the device is suspended,
or this leads to a hang when the IOMEM region is accessed while the
clks are disabled. Do what other sub-components do and conditionally
call panthor_pwr_irq_suspend() if we know the PWR regbank block is
accessible.
Fixes: c27787f2b7 ("drm/panthor: Introduce panthor_pwr API and power control framework")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-7-b67ed973fea6@collabora.com
In theory, our hardirq handler can be called while the device (and
thus the panthor_irq) is suspended, because the IRQ line is shared.
In practice though, in all the designs we've seen, the line is only
shared within the GPU, and because sub-component suspend state is
consistent (all-suspended or all-resumed), we shouldn't end up with
an interrupt triggered while we're suspended.
Fix the problem anyway, if nothing else, for our sanity.
Fixes: 0b2d86670a ("drm/panthor: Rework panthor_irq::suspended into panthor_irq::state")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260625-panthor-signal-from-irq-v4-0-3d2908912afa@collabora.com?part=1
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-5-b67ed973fea6@collabora.com
komeda_dev_resume() calls clk_prepare_enable() without checking the
return value. If the clock fails to enable, the function returns 0
(success) while IRQs are enabled and IOMMU is connected on potentially
unclocked hardware, causing undefined behavior on resume.
Propagate the error from clk_prepare_enable() and fix all call sites
in komeda_drv.c that previously ignored the return value of
komeda_dev_resume():
- komeda_platform_probe(): if resume fails, jump to err_destroy_mdev
(skipping the suspend call, since the clock was never enabled)
- komeda_pm_resume(): propagate the error and skip
drm_mode_config_helper_resume() on failure
This issue was found by code review without access to Komeda hardware.
Signed-off-by: Gustavo Kenji Mendonça Kaneko <kaneko.dev@pm.me>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260609130828.1066038-1-kaneko.dev@pm.me
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
malidp_runtime_pm_resume() calls clk_prepare_enable() three times
without checking the return value. If any clock fails to enable, the
driver silently proceeds with unclocked hardware, leading to undefined
behavior.
Convert both the resume and suspend paths to use the clk_bulk API:
clk_bulk_prepare_enable() in resume checks the return value and rolls
back any successfully enabled clocks on failure;
clk_bulk_disable_unprepare() in suspend keeps the two paths symmetric.
This issue was found by code review without access to Mali DP hardware.
Signed-off-by: Gustavo Kenji Mendonça Kaneko <kaneko.dev@pm.me>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260609130812.1065699-1-kaneko.dev@pm.me
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
virtio_get_edid_block() validates the read offset only against the
device-supplied resp->size field, never against the fixed-size resp->edid
array. The EDID block index is driven by the device-supplied extension
count, so a malicious virtio-gpu backend can advertise a large size
together with a high block count and read far past the array into adjacent
kernel memory, which is then surfaced in the parsed EDID (an out-of-bounds
read / info leak).
Also reject any read whose end exceeds the size of the edid array.
Conforming EDID responses stay within the array and are unaffected.
Fixes: b4b01b4995 ("drm/virtio: add edid support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260620-b4-disp-22bba7bf-v1-1-b95924cee742@proton.me
When force_iova mode is enabled, amdxdna_remove() frees xdna->domain. If
amdxdna_gem_obj_free() is called after device removal, it may attempt to
access xdna->domain, resulting in a use-after-free.
Fix the race by adding freeing xdna->domain as a managed release action,
so its lifetime is managed by DRM and remains valid until all managed
resources are released.
Fixes: ece3e89809 ("accel/amdxdna: Allow forcing IOVA-based DMA via module parameter")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260611055150.3070216-3-lizhi.hou@amd.com
amdxdna_remove() destroys notifier_wq. If amdxdna_gem_obj_free() is
called after device removal, it may attempt to flush notifier_wq,
resulting in a use-after-free.
Fix the race by allocating notifier_wq with
drmm_alloc_ordered_workqueue(), so its lifetime is managed by DRM and
remains valid until all managed resources are released.
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260611055150.3070216-2-lizhi.hou@amd.com
In amdxdna_remove(), all amdxdna_client structures are freed after
calling drm_dev_unplug(). However, drm_dev_unplug() does not force
existing file descriptors to be closed, so amdxdna_drm_close() may be
called after amdxdna_remove() has completed.
As a result, accessing client->pid for debug output in
amdxdna_drm_close() can lead to a use-after-free, since the access is
not protected by drm_dev_enter().
Fix this by decoupling hardware teardown from client cleanup.
amdxdna_remove() only performs hardware-related cleanup, while
per-client resources are released from amdxdna_drm_close() when the
corresponding file is closed.
Fixes: be462c97b7 ("accel/amdxdna: Add hardware context")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260611055150.3070216-1-lizhi.hou@amd.com
Pull in tag v7.2-rc1 so that drm-misc-fixes becomes useful again,
and drm-misc-next-fixes can be closed.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
dma_fence_dedup_array() returns 1 when called with num_fences == 0:
the for-loop body never executes, j stays at 0, and the final
`return ++j` yields 1. This contradicts both the kernel-doc ("Return:
Number of unique fences remaining in the array") and the natural
expectation that 0 input gives 0 output.
The caller __dma_fence_unwrap_merge() bails out via the
`if (count == 0 || count == 1)` fast path and so is save.
But amdgpu_userq_wait_*() could reach the dedup call with a zero local
count and dereference an uninitialized fence slot in the array.
Make the contract match the documentation by returning 0 early. This
also skips an unnecessary sort() call on an empty array.
Cc: stable@vger.kernel.org
Signed-off-by: Baineng Shou <shoubaineng@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 575ec9b0c2 ("dma-fence: Add helper to sort and deduplicate dma_fence arrays")
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260629031346.3875683-1-shoubaineng@gmail.com
The commit mentioned in the fixes tag below introduced a mechanism
through which fence producers can fully decouple from fence consumers.
This, desirable, mechanism is based on the fence's signaled-bit as the
"decoupling point".
A sophisticated interaction between RCU and atomic instructions attempts
to ensure that fence consumers can still interact with fence producers
through the dma_fence_ops (callback pointers into the producer).
This is the desired behavior: to check for decoupling, the signaled-bit
is first checked. If it's not yet signaled, RCU ensures that the ops
pointer cannot yet be NULL.
Hereby, dma_fence_signal_timestamp_locked() first sets the signaled-bit,
and then sets the ops pointer to NULL. Readers first load the ops
pointer, and then check through the signaled-bit whether the pointer can
legally be accessed.
These set and load operations could occur out of order on weakly ordered
platforms. This problem can be solved very elegantly by using the ops
pointer itself as the synchronization point. The pointer is either NULL,
or cannot become NULL while it is being used thanks to RCU.
Replace the signaled-bit check in dma_fence_timeline_name() and
dma_fence_driver_name().
Cc: stable@vger.kernel.org
Fixes: f4cc3ab824 ("dma-buf: protected fence ops by RCU v8")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20260629075636.2513214-2-phasta@kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
dma_fence_timeline_name() is a wrapper around
dma_fence_ops::get_timeline_name(). Since the blamed commit below, it
calls an incorrect callback.
Update it to restore functionality by calling the intended callback.
Fixes: 62918542b7 ("dma-fence: Fix sparse warnings due __rcu annotations")
Cc: <stable@vger.kernel.org> # v7.1+
[tursulin: added cc stable]
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260618-linux-drm_crtc_fix-v1-1-801f29c9853d@linaro.org
device removal, along with documentation fixes and minor AMD driver
cleanups.
-----BEGIN PGP SIGNATURE-----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=V3cD
-----END PGP SIGNATURE-----
Merge tag 'ntb-7.2' of https://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"An EPF bug fix to prevent an invalid unmap during device removal,
along with documentation fixes and minor AMD driver cleanups"
* tag 'ntb-7.2' of https://github.com/jonmason/ntb:
ntb: amd: Use named initializer for pci_device_id::driver_data
NTB: fix kernel-doc warnings in ntb.h
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
ntb_hw_amd: Fix incorrect debug message in link disable path
- Updates to Synaptics RMI4 driver to fix potential OOB accesses in
F30 and F3A keymap handling
- A workaround in Synaptics RMI4 to tolerate buggy firmware on some
touchpads (e.g. ThinkPad T14 Gen 1) that report incomplete register
descriptor structures, preventing probe failures
- A revert of an incorrect register descriptor address calculation in
Synaptics RMI4 driver
- A fix for a regression in HP GSC PS/2 (gscps2) driver where the
receive buffer write index was not advanced, leaving keyboard and
mouse unusable.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCakCsxwAKCRBAj56VGEWX
nCICAQDSgfrAi+4SqTb92EjtdQO+ypluS42mKO75LTitJcS8dAEA1iKmdss8mGww
c4ai4W+UFxori7IqgkoQ7LfaPTOWlA0=
=QP4c
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.2-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov:
- Updates to Synaptics RMI4 driver to fix potential OOB accesses in F30
and F3A keymap handling
- A workaround in Synaptics RMI4 to tolerate buggy firmware on some
touchpads (e.g. ThinkPad T14 Gen 1) that report incomplete register
descriptor structures, preventing probe failures
- A revert of an incorrect register descriptor address calculation in
Synaptics RMI4 driver
- A fix for a regression in HP GSC PS/2 (gscps2) driver where the
receive buffer write index was not advanced, leaving keyboard and
mouse unusable.
* tag 'input-for-v7.2-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gscps2 - advance receive buffer write index
Input: rmi4 - tolerate short register descriptor structure
Revert "Input: rmi4 - fix register descriptor address calculation"
Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
Two more fixes that I managed to put into the public branch merged into
next before my first PR but missed to include them in it. The first
change is a relevant change that fixes misconfigurations due to a
variable overflow. The 2nd is only cosmetic but very obviously an
improvement.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmpAE2gACgkQj4D7WH0S
/k7tnAgAsjkBQWoav1MF8kyVzew+iIuVvBrtUPimzeMs2gzwC1czi/TPKCvZxGND
XaPESmf51lC9AZuFd/2Wfvb2GydxA/wmsbVB0Q6ZBwLtS6/L4yiv3DpYN2to9yWN
QvVHeVCBdSbMHOQXdG0iFbhMiLyUX5YwCwyZT2cuVUHb4gvNLuDuKbgSXX9Odh1R
/p9C0afNMbdxuj2yRy+S8CM5Rl5v4yfBw6cswKX6w3uA+LnvksWuC8og7tEfFa/F
Vdwy4csWeKHGm7jEP9o6iSlWYy+DMKf5Llop+yFLZV6Db6AXMlEpNOXJsGxEv95y
qMTQFCGhepNWqVuUDDOOeUs60Asjpg==
=0WY9
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Two more fixes that I managed to put into the public branch merged
into next before my first pull request but missed to include them in
it.
The first change is a relevant change that fixes misconfigurations due
to a variable overflow. The second is only cosmetic but very obviously
an improvement"
* tag 'pwm/for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: rzg2l-gpt: Add missing newlines to dev_err_probe() messages
pwm: rzg2l-gpt: Fix period_ticks type from u32 to u64
Fixes:
- fbcon: fix NULL pointer dereference for a console without vc_data [Ian Bridges]
- fbdev: fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var [Ian Bridges]
Fixes in failure paths:
- pm2fb: unwind write-cache setting on probe failure [Haoxiang Li]
- goldfishfb: fail pan display on base-update timeout [Pengpeng Hou]
- viafb: return error on DMA copy time-out [Pengpeng Hou]
- fbcon: fix out-of-bounds read in error path of fbcon_do_set_font() [Mingyu Wang]
- fbdev: fix modelist use-after-free in store_modes() [Ian Bridges]
Code cleanup:
- vga16fb: clean up platform_device_id table [Uwe Kleine-König]
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCakAKnwAKCRD3ErUQojoP
X27+AQCPvMJUMScjO1dlGKkPnnIFiOWCU6AW1aM2m6T+qWrCTQEAnNi5CCI3JiLi
6NCcyPm7/4R6tSXDm+UcWJ5tyzaNvww=
=EBHb
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull more fbdev updates from Helge Deller:
"Fixes for generic fbdev & fbcon code for the handling of modelists
and preventing a potential NULL ptr dereference in the console code.
Fix missed cleanups in the error path of various fbdev drivers.
And Uwe Kleine-König contributed a cleanup patch to use named
initializers in the vga16fb driver"
* tag 'fbdev-for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
fbcon: fix NULL pointer dereference for a console without vc_data
fbdev: fix use-after-free in store_modes()
fbdev: viafb: return an error when DMA copy times out
fbdev: goldfishfb: fail pan display on base-update timeout
fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font()
fbdev: pm2fb: unwind WC setup on probe failure
fbdev: vga16fb: Drop unused assignment of platform_device_id driver data
A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments caiaq
/ Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight
-----BEGIN PGP SIGNATURE-----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=hJ5w
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments
caiaq / Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight"
* tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: FCP: Fix NULL pointer dereference in interface lookup
ALSA: hda/realtek: Update Acer Nitro ANV15-41 quirk to enable mute LED
ASoC: fsl_asrc_dma: fix eDMA maxburst misalignment with channel count
ASoC: codecs: pcm512x: only print info once on no sclk
ASoC: tas2781: Update default register address to TAS2563
ALSA: firewire: isight: bound the sample count to the packet payload
ALSA: usb-audio: qcom: Free QMI handle
ALSA: hda: Add Lenovo Legion 7i 16IAX7 17AA3874 quirk
ALSA: usb-audio: avoid kobject path lookup in DualSense match
ALSA: hda/realtek: Add quirk for Acer Nitro ANV15-41
ASoC: soc-core: Don't fail if device_link could not be created
ASoC: rockchip: rockchip_sai: #include <linux/platform_device.h> explicitly
ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()
ASoC: rt5575: Use __le32 for SPI burst write address
ASoC: tas2783: Update loaded firmware names to linux-firmware 20260519
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ASoC: realtek: Add back local call to sdw_show_ping_status()
ASoC: ti: Add back local call to sdw_show_ping_status()
ASoC: max98373: Add back local call to sdw_show_ping_status()
ASoC: es9356: Add back local call to sdw_show_ping_status()
...
