Add a PWR_CONTROL-local iomem pointer to struct panthor_pwr and switch
power controller register accesses to that base.
Update IRQ-local iomem base to use PWR_CONTROl-local iomem and update
the register definitions so the PWR block can be addressed relative to
its local base. This removes the remaining dependence on the global
device MMIO mapping for PWR register accesses. Update
panthor_gpu_info_init() to also use the correct PWR_CONTROL iomem for
the *_PRESENT registers.
No functional change intended.
v3:
- Clean up definitions for pwr->iomem and pwr->irq.iomem.
- Update PWR_INT_BASE to be relative to pwr->iomem.
v2:
- Update panthor_gpu_info_init() to use block-local iomem pointer.
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-7-karunika.choo@arm.com
Add a GPU_CONTROL-local iomem pointer to struct panthor_gpu and use it
for GPU register accesses.
This limits GPU register accesses to the GPU block instead of using the
device-wide MMIO mapping directly. Interrupt register accesses continue
to use the IRQ-local base provided by the common IRQ helpers. Update
panthor_gpu_info_init() to also use a local iomem offset for GPU
features and capability.
This is a refactoring only and does not change behaviour.
v3:
- Pick up R-bs from Liviu and Steve
v2:
- Update panthor_gpu_info_init() to use block-local iomem pointer.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-6-karunika.choo@arm.com
Update common IRQ handling code to work from an IRQ-local iomem base
instead of referencing block-specific interrupt register offsets.
Store the interrupt base address iomem pointer in struct panthor_irq and
switch the shared IRQ helpers to use generic INT_* offsets from that
local base. This removes the need for each caller to expose absolute IRQ
register addresses while keeping the common IRQ flow unchanged.
No functional change intended.
v3:
- Clean up definition of pwr->irq.iomem.
v2:
- Change IRQ request function to accept an iomem pointer instead of
computing it from an offset argument.
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-5-karunika.choo@arm.com
Stop reaching into other components' registers directly and route those
operations through the component that owns them.
Move the timestamp/coherency helpers into panthor_gpu, add a doorbell
helper, and update call sites accordingly. This keeps register knowledge
local to each block and avoids spreading cross-component register
accesses across the driver.
This is a preparatory cleanup for using per-component iomem bases.
v3:
- Pick up Ack from Boris and R-bs from Liviu and Steve
v2:
- Fix incorrect spelling of timestamp helpers
- Fix unintended trailing backslash
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-4-karunika.choo@arm.com
Split the panthor register definitions into per-component headers for
the GPU, MMU, firmware, power and generic hardware registers.
This makes the register layout easier to follow and prepares the driver
for component-local iomem mappings by grouping definitions with the code
that owns them. The old monolithic panthor_regs.h header can then be
dropped.
No functional change intended.
v3:
- Pick up Ack from Boris and R-bs from Liviu and Steve
v2:
- Merge GPU_ID definitions into panthor_gpu_regs.h
- deleted panthor_hw_regs.h
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-3-karunika.choo@arm.com
Convert the Panthor register access helpers to take an iomem pointer
instead of a panthor_device pointer.
This makes the helpers usable with block-local registers instead of
routing all accesses to go through ptdev->iomem. It is a preparatory
change for splitting the register space by components and for moving
callers away from cross-component register accesses.
No functional change intended.
v3:
- Pick up R-bs from Liviu and Steve
v2:
- Pick up Ack from Boris.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260427155934.416502-2-karunika.choo@arm.com
As I will be departing from my current position, I will
no longer maintain the driver, and remove myself from
ivpu's maintainers entry. Andrzej will support Karol
in maintaining the driver.
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260429083958.2148777-1-maciej.falkowski@linux.intel.com
shmob_drm_connector_create() can init the connector in two ways, based on
the 'if (sdev->pdata)':
1. manually in shmob_drm_connector_create(), or
2. delegating to drm_bridge_connector_init()
Whichever branch is taken, drm_connector_attach_encoder() is called
immediately after to attach the connector to the encoder.
Now drm_bridge_connector_init() calls drm_connector_attach_encoder() on the
connector so it is not needed anymore in case 2 and should be removed, but
it is still needed in case 1. Move drm_connector_attach_encoder() from the
common path to inside shmob_drm_connector_create() in order to get back to
a single drm_connector_attach_encoder() in both cases.
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260423115550.444930-7-luca.ceresoli@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
drm_connector_attach_encoder() is now called by
drm_bridge_connector_init().
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260423115550.444930-5-luca.ceresoli@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Currently all users of the bridge-connector must call
drm_connector_attach_encoder() immediately after a successful
drm_bridge_connector_init().
This is an unnecessary burden for users. Move the call to the end of
drm_bridge_connector_init() so all callers can be simplified.
Update documentation accordingly, rewording a bit the whole paragraph which
would otherwise become poorly readable due to the growing list of actions.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260423-drm-bridge-connector-attach_encoder-v2-1-2ae6ca69b390@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
When Nouveau boots with GSP-RM, it bypasses several traditional code
paths to allow GSP-RM to handle those features. In particular,
some VBIOS parsing is skipped, and a side effect is that the VBIOS
is not exposed in the DRM debugfs entries.
Fix this by updating the drm BIOS struct (nvbios) with the VBIOS data
from the nvkm BIOS struct (nvkm_bios). This happens normally in
NVInitVBIOS(), but that function is skipped when booting with GSP-RM.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260428202825.1123719-1-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
We have a helper drm_printf_indent() for tab indenting the prints. It
makes the actual strings more readable, and highlights the indented
parts better in source.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20260408082211.3040194-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
