The cipher type check is redundant, and there is no need to dereference the
key struct here.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20250311103646.43346-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The firmware needs a specific trigger when WED is being reset due to an
ethernet reset condition. This helps prevent further L1 SER failure.
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Link: https://patch.msgid.link/20250311103646.43346-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Size of MPDU/PPDU TXS is 12 DWs.
In mt7996/mt7992, last 4 DWs are reserved, so TXS size was mistakenly
considered to be 8 DWs. However, in mt7990, 9th DW of TXS starts to be used.
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Link: https://patch.msgid.link/20250311103646.43346-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Refactor for making use of mt76_get_power_bound instead of the specific
mt7996_get_power_bound, since we need this for other chipsets as well
when calculating txpower
Signed-off-by: Razvan Grigore <razvan.grigore@vampirebyte.ro>
Link: https://patch.msgid.link/20250211081247.5892-6-razvan.grigore@vampirebyte.ro
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Refactor for making use of mt76_get_power_bound instead of the specific
mt7915_get_power_bound, since we need this for other chipsets as well
when calculating txpower
Signed-off-by: Razvan Grigore <razvan.grigore@vampirebyte.ro>
Link: https://patch.msgid.link/20250211081247.5892-5-razvan.grigore@vampirebyte.ro
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This will replace mt7915_get_power_bound function from b/mt7915/mcu.h,
since we will need it also for mt7921 and mt7925
Signed-off-by: Razvan Grigore <razvan.grigore@vampirebyte.ro>
Link: https://patch.msgid.link/20250211081247.5892-2-razvan.grigore@vampirebyte.ro
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Apply the MTCL configuration to improving channel availability and
regulatory compliance if MTCL table is supported.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250304113649.867387-6-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This patch introduces version 3 of the MTCL table, which provides
regulatory information for WiFi 7. It also configured by the platform
vender like the version 1 and 2.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250304113649.867387-5-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The code for handling ACPI configuration in CLC was copied from the mt7921
driver but is not utilized in the mt7925 implementation. So removes the
unused functionality to clean up the codebase.
Cc: stable@vger.kernel.org
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250304113649.867387-4-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The 5.9/6GHz channel license of a certain platform device has been
regulated in various countries. That may be difference with standard Liunx
regulatory domain settings. In this case, when .reg_notifier() called for
regulatory change, mt7925 chipset should update the channel usage based on
CLC data.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250304113649.867387-3-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Some countries do not support EHT modulation for now. To prevent violating
regulations, the MT7925 chipset should control the EHT capabilities.
Therefore, when a regulatory domain change is detected during scanning,
the `mt7925_regd_be_ctrl` will process the CLC data to update the EHT
capabilities.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250304113649.867387-2-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
After joining MLO, ensure that all links are setup before
enabling power-saving.
Fixes: 86c051f2c4 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Cc: stable@vger.kernel.org
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250305000851.493671-6-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Integrate *mlo_sta_cmd and *sta_cmd for the MLO firmware.
Fixes: 86c051f2c4 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Cc: stable@vger.kernel.org
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250305000851.493671-5-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Removing BSS without removing STAREC first will cause firmware
abnormal and next connection fail.
Fixes: 816161051a ("wifi: mt76: mt7925: Cleanup MLO settings post-disconnection")
Cc: stable@vger.kernel.org
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250305000851.493671-4-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mt7925 chip is only support a single radio, so the maximum
number of simultaneous should be 0.
Fixes: 86c051f2c4 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Cc: stable@vger.kernel.org
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250305000851.493671-3-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When the p2p device and MLO station are running concurrently, the p2p device
will occupy the wrong link_idx when the MLO secondary link is added.
Fixes: 9e4c3a007f ("wifi: mt76: connac: Extend mt76_connac_mcu_uni_add_dev for MLO")
Cc: stable@vger.kernel.org
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250305000851.493671-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For MLO, mac80211 will send the BA action for each link to
the driver, so the driver does not need to handle it itself.
Therefore, revert this patch.
Fixes: eb2a9a12c6 ("wifi: mt76: mt7925: Update mt7925_mcu_uni_[tx,rx]_ba for MLO")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Tested-by: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20250305000851.493671-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
System suspend failures may occur due to inappropriate
handling of traffic not idle event by the WiFi driver.
The WiFi firmware's traffic not idle indication does
not need to be tied to suspend. Fix the flow to ensuring
the system can suspend properly.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Link: https://patch.msgid.link/34208c7280325f57a651363d339399eb1744d3b7.1740400998.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Due to the increase in the number of power tables for 6Ghz on CLC,
the variable nr_country is no longer sufficient to represent the
total quantity. Therefore, we have switched to calculating the
length of clc buf to obtain the correct power table.
Cc: stable@vger.kernel.org
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250116062131.3860198-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Assuming sums of values stored in variables such as sub_total_cnt
and total_ppdu_cnt are big enough to warrant their u64 type, it
makes sense to ensure that their calculation takes into account
possible integer overflow issues.
Play it safe and fix the problem by casting right hand expressions
to u64 as well. Also, slightly adjust tabulation.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 1966a5078f ("mt76: mt7915: add mu-mimo and ofdma debugfs knobs")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250114154441.16920-1-n.zhandarovich@fintech.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mt7925 sometimes fails to enter low power mode during suspend.
This is caused by the chip firmware sending an additional ACK event
to the host after processing the suspend command. Due to timing issues,
this event may not reach the host, causing the chip to get stuck.
To resolve this, the ACK flag in the suspend command is removed,
as it is not needed in the MT7925 architecture. This prevents the
firmware from sending the additional ACK event, ensuring the device
can reliably enter low power mode during suspend.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Link: https://patch.msgid.link/d056938144a3a0336c3a4e3cec6f271899f32bf7.1736775666.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This patch introduces MLO capability control for the MT792x Wi-Fi driver.
It removes the unused `MT792x_CHIP_CAP_MLO_EVT_EN` flag and introduces new
capability flags `MT792x_CHIP_CAP_MLO_EN` and `MT792x_CHIP_CAP_MLO_EML_EN`
to enable MLO and EML features based on firmware capabilities.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Reviewed-by: Sabeeh Khan <sabeeh-khan@ti.com>
Link: https://patch.msgid.link/20250217081729.1840930-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Some minor fixes and refinements of rtw89.
The only major change is rtw88:
* support RTL8814AE/RTL8814AU
-----BEGIN PGP SIGNATURE-----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=M1Go
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2025-03-13' of https://github.com/pkshih/rtw
Ping-Ke Shih says:
====================
rtw-next patches for v6.15
Some minor fixes and refinements of rtw89.
The only major change is rtw88:
* support RTL8814AE/RTL8814AU
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the `__struct_group()`
helper to create a new tagged `struct iwl_tx_cmd_hdr`. This structure
groups together all the members of the flexible `struct iwl_tx_cmd`
except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct members currently causing
trouble from `struct iwl_tx_cmd` to `struct iwl_tx_cmd_hdr`.
We also want to ensure that when new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
This approach avoids having to implement `struct iwl_tx_cmd_hdr`
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.
So, with these changes, fix the following warnings:
drivers/net/wireless/intel/iwlwifi/dvm/commands.h:2315:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/dvm/commands.h:2426:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/Zr5QR03+wyw571zd@elsanto
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Roll-back to use iwlmvm for those devices. iwlmld will support wifi7
capable devices only. The firmware for the non-wifi7 capable will soon
be frozen and we don't want iwlmld to have to support devices that will
require the old APIs.
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250318103019.df6df96df826.I0020ca9f6c6c928caa78721666df131a692c6186@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch resolves an issue where RF calibration data from a
file could not be downloaded to the firmware. The feature to
download calibration data from a file was broken by the commit:
d39fbc8895.
The issue arose because the function `mwifiex_cmd_cfg_data()`
was modified in a way that prevented proper handling of
file-based calibration data. While this patch restores the ability
to download RF calibration data from a file, it may inadvertently
break the feature to download calibration data from the device
tree. This is because the function `mwifiex_dnld_dt_cfgdata()`,
which also relies on `mwifiex_cmd_cfg_data()`, is still used for
device tree-based calibration data downloads.
Fixes: d39fbc8895 ("mwifiex: remove cfg_data construction")
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Link: https://patch.msgid.link/20250318050739.2239376-3-jeff.chen_1@nxp.com
[add newline for shorter lines]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch resolves an issue where RF calibration data was being
released before the download process. Without this fix, the
external calibration data file would not be downloaded
at all.
Fixes: d39fbc8895 ("mwifiex: remove cfg_data construction")
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Link: https://patch.msgid.link/20250318050739.2239376-2-jeff.chen_1@nxp.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When userspace sets supported rates for a new station via
NL80211_CMD_NEW_STATION, it might send a list that's empty
or contains only invalid values. Currently, we process these
values in sta_link_apply_parameters() without checking the result of
ieee80211_parse_bitrates(), which can lead to an empty rates bitmap.
A similar issue was addressed for NL80211_CMD_SET_BSS in commit
ce04abc3fc ("wifi: mac80211: check basic rates validity").
This patch applies the same approach in sta_link_apply_parameters()
for NL80211_CMD_NEW_STATION, ensuring there is at least one valid
rate by inspecting the result of ieee80211_parse_bitrates().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: b95eb7f0ee ("wifi: cfg80211/mac80211: separate link params from station params")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosa.ru>
Link: https://patch.msgid.link/20250317103139.17625-1-m.lobanov@rosa.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's some confusing indentation, I thought even that braces
were missing. Fix indentation here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch addresses an issue where, despite the AP supporting 40MHz
bandwidth, the connection was limited to 20MHz. Without this fix,
even if the access point supports 40MHz, the bandwidth after
connection remains at 20MHz. This issue is not a regression.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250314094238.2097341-1-jeff.chen_1@nxp.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mld_remove_link removes the link from both the FW and from the
driver.
If removing it from the FW failed, we assume that the FW is
dead anyway and remove it from the driver as well.
On the other hand, we still return an error value, indicating the caller
(i.e. mac80211) that the link couldn't be removed - while it was
actually removed.
Later, mac80211 might tell the driver again to remove that link,
and then the driver will warn that it doesn't exist.
Fix this by making iwl_mld_remove_link a void function.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.16fe6ebae412.If5371ff7e096b7078ff9e98ff0e72010cd1f076d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently iwlmld_kunit_add_chanctx receives a band, picks a predefined
static chandef, and creates the chanctx from it.
Change it to receive a bandwidth as well. Otherwise, the bandwidth in
the chanctx/phy will be different than what test specified in the
iwl_mld_kunit_link.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.85a1285d34cd.Ia71cdcd4241fe73501bc93e3cb2c6bb3f631b9ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To allow setting up association/EMLSR states with more flexibility,
change the relevant functions to receive a new struct, iwl_mld_kunit_link,
which will contain all the link parameters (for now just link id, band
and bandwidth).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.f336491ccc4e.I6b727765eb394a3dbb78cea71e356be1bdc4a17c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow EMLSR if the bandwidths of the links are unequal if one of the
following conditions is true:
1. in low latency mode
2. bandwidth of the secondary link is greater than the bandwidth of the
primary
3. the primary link is active and is loaded enough to justify EMLSR
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.150c330711c4.Ifd72d2e076783991852a7f1756948b4f0efb9fea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We exit EMLSR mode if the FW requested to do so.
To prevent repeated toggling of the EMLSR mode (frequent entry and
exit), add this exit reason to the EMLSR prevention mechanism.
This mechanism avoids re-entering EMLSR for a certain period of time
after multiple exits caused by the same reason.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.f0e74a7f99af.I447c8788afba85a2a5040ae2c1213b6e05ec14f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The channel load logic moves from the FW to the driver.
- Implement the logic: allow EMLSR only if the candidate primary link is
active and if its average channel load exceeds the threshold.
- Remove IWL_MLD_EMLSR_BLOCKED_FW. Instead, treat ESR_RECOMMEND_LEAVE in
the EMLSR_RECOMMENDATION notif as an EXIT reason.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.6729a8d67815.Iab39bf0982d8cdbb0db701d31854101c2fcf3b64@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add debugfs file in mld to retrieve TAS status per radio, TAS block list,
current mcc, OEM name and OEM allowed list. This will add ability to get
TAS status to user application via debugfs and required for debugging.
Add the required API definitions and some debug host command utils.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.66524c6ea198.I1625135284fc075148a55dd9ac629e94ca881fe4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
