This is the new API for allocating DRM bridges.
Switching from a non-devm to a devm allocation allows removing the kfree()
in the remove function and in the probe error management code, and as a
consequence to simplify the code flow by removing now unnecessary gotos.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-10-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250520-drivers-mass-convert-part2-v3-9-f7ae7b723c68@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Rewrite the ADV7511 driver to use implementation provided by the DRM
HDMI connector framework, including the Audio and CEC bits. Drop the
in-bridge connector support and use drm_bridge_connector if the host
requires the connector to be provided by the bridge.
Note: currently only AVI InfoFrames are supported. Existing driver
doesn't support programming any other InfoFrames directly and Audio
InfoFrame seems to be programmed using individual bits and pieces rather
than programming it directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-10-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Allow HDMI DRM bridges to create CEC notifier. Physical address is
handled automatically by drm_atomic_helper_connector_hdmi_hotplug()
being called from .detect() path.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-8-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add generic CEC helpers to be used by HDMI drivers. Both notifier and
and adapter are supported for registration. Once registered, the driver
can call common set of functions to update physical address, to
invalidate it or to unregister CEC data. Unlike drm_connector_cec_funcs
(which provides interface common to all implementations, including, but
not limited to the CEC adapter, CEC notifier, CEC pin-based adapter,
etc) the struct drm_connector_hdmi_cec_adapter_ops provides callbacks
specific to the CEC adapter implementations.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-5-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
THe Kconfig symbol DRM_DISPLAY_DP_AUX_CEC is a boolean which simply
toggles whether DP_AUX_CEC support should be built into the
drm_display_helper (which can be eithera module or built-in into the
kernel). If DRM_DISPLAY_DP_AUX_CEC is selected, then CEC_CORE is
selected to be built-in into the kernel even if DRM_DISPLAY_HELPER is
selected to be built as a module. Move CEC_CORE selection to the latter
symbol in order to allow it to be built as a module.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-4-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
As a preparation to adding HDMI CEC helper code, add CEC-related fields
to the struct drm_connector. The callbacks abstract CEC infrastructure
in order to support CEC adapters and CEC notifiers in a universal way.
CEC data is a void pointer as it allows us to make CEC data
helper-specific. For example, currently it will be either cec_notifier
or cec_adapter + drm_connector_hdmi_cec_funcs. Later cec-pin might store
platform callbacks here. DP CEC might need to store AUX pointer, etc.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-3-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
By default HDMI codec registers all formats supported on the I2S bus.
Allow bridges (and connectors) to limit the list of the PCM formats
supported by the HDMI codec.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-2-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
WHen adding HDMI fields I didn't notice the private: declaration for HPD
fields. Move private fields to the end of the struct drm_bride to have
clear distinction between private and public fields.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-1-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Enable display for AM62L DSS [1] which supports only a single display
pipeline using a single overlay manager, single video port and a single
video lite pipeline which does not support scaling.
The output of video port is routed to SoC boundary via DPI interface and
the DPI signals from the video port are also routed to DSI Tx controller
present within the SoC.
[1]: Section 11.7 (Display Subsystem and Peripherals)
Link : https://www.ti.com/lit/pdf/sprujb4
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250507180631.874930-4-devarsht@ti.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
SoCs like AM62Lx support cut-down version of K3 DSS where although same
register space is supported as in other K3 DSS supported SoCs such as
AM65x, AM62x, AM62Ax but some of the resources such as planes and
corresponding register spaces are truncated.
For e.g. AM62Lx has only single VIDL pipeline supported, so corresponding
register spaces for other video pipelines need to be skipped.
To add a generic support for future SoCs where one or more video pipelines
can get truncated from the parent register space, move the video plane
related information to vid_info struct which will also have a field to
indicate hardware index of each of the available video planes, so that
driver only maps and programs those video pipes and skips the unavailable
ones.
While at it, also change the num_planes field in the features structure to
num_vid so that all places in code which use vid_info structure are
highlighted in the code.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250507180631.874930-3-devarsht@ti.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
