- Add support for tracing in the standalone EL2 hypervisor code, which
should help both debugging and performance analysis. This uses the
new infrastructure for 'remote' trace buffers that can be exposed
by non-kernel entities such as firmware, and which came through the
tracing tree.
- Add support for GICv5 Per Processor Interrupts (PPIs), as the starting
point for supporting the new GIC architecture in KVM.
- Finally add support for pKVM protected guests, where pages are unmapped
from the host as they are faulted into the guest and can be shared back
from the guest using pKVM hypercalls. Protected guests are created
using a new machine type identifier. As the elusive guestmem has not
yet delivered on its promises, anonymous memory is also supported.
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet isolated.
Because this does not really yet bring fully what it promises, it is
hidden behind CONFIG_ARM_PKVM_GUEST + 'kvm-arm.mode=protected', and
also triggers TAINT_USER when a VM is created. Caveat emptor.
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state immutable.
- Expand the Stage-2 page table dumper to support NV shadow page tables
on a per-VM basis.
- Tidy up the pKVM PSCI proxy code to be slightly less hard to follow.
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups.
- A small set of patches fixing the Stage-2 MMU freeing in error cases.
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls.
- The usual cleanups and other selftest churn.
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel().
- Add DMSINTC irqchip in kernel support.
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors.
- Remove restriction on memslot alignment, which is not needed anymore with
the new gmap code.
- Fix LPSW/E to update the bear (which of course is the breaking event
address register).
x86:
- Shut up various UBSAN warnings on reading module parameter before they
were initialized.
- Don't zero-allocate page tables that are used for splitting hugepages in
the TDP MMU, as KVM is guaranteed to set all SPTEs in the page table and
thus write all bytes.
- As an optimization, bail early when trying to unsync 4KiB mappings if the
target gfn can just be mapped with a 2MiB hugepage.
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more precisely
struct kvm_mmio_fragment) to fix use-after-free stack bugs where KVM
would dereference stack pointer after an exit to userspace.
- Clean up and comment the emulated MMIO code to try to make it easier to
maintain (not necessarily "easy", but "easier").
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of VMX
and SVM enabling) as it is needed for trusted I/O.
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one of
KVM's headers that is included multiple times.
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM.
- Exempt SMM from CPUID faulting on Intel, as per the spec.
- Misc hardening and cleanup changes.
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it per-vCPU
so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs.
- Clean up and optimize the OSVW handling, avoiding a bug in which KVM would
overwrite state when enabling virtualization on multiple CPUs in parallel.
This should not be a problem because OSVW should usually be the same for
all CPUs.
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains about a
"too large" size based purely on user input.
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION.
- Disallow synchronizing a VMSA of an already-launched/encrypted vCPU, as
doing so for an SNP guest will crash the host due to an RMP violation
page fault.
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped queries
are required to hold kvm->lock, and enforce it by lockdep. Fix various
bugs where sev_guest() was not ensured to be stable for the whole
duration of a function or ioctl.
- Convert a pile of kvm->lock SEV code to guard().
- Play nicer with userspace that does not enable KVM_CAP_EXCEPTION_PAYLOAD,
for which KVM needs to set CR2 and DR6 as a response to ioctls such as
KVM_GET_VCPU_EVENTS (even if the payload would end up in EXITINFO2
rather than CR2, for example). Only set CR2 and DR6 when consumption of
the payload is imminent, but on the other hand force delivery of the
payload in all paths where userspace retrieves CR2 or DR6.
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT instead
of vmcb02->save.cr2. The value is out of sync after a save/restore
or after a #PF is injected into L2.
- Fix a class of nSVM bugs where some fields written by the CPU are not
synchronized from vmcb02 to cached vmcb12 after VMRUN, and so are not
up-to-date when saved by KVM_GET_NESTED_STATE.
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE and
KVM_SET_{S}REGS could cause vmcb02 to be incorrectly initialized after
save+restore.
- Add a variety of missing nSVM consistency checks.
- Fix several bugs where KVM failed to correctly update VMCB fields on
nested #VMEXIT.
- Fix several bugs where KVM failed to correctly synthesize #UD or #GP for
SVM-related instructions.
- Add support for save+restore of virtualized LBRs (on SVM).
- Refactor various helpers and macros to improve clarity and (hopefully)
make the code easier to maintain.
- Aggressively sanitize fields when copying from vmcb12, to guard against
unintentionally allowing L1 to utilize yet-to-be-defined features.
- Fix several bugs where KVM botched rAX legality checks when emulating SVM
instructions. There are remaining issues in that KVM doesn't handle size
prefix overrides for 64-bit guests.
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails instead of
somewhat arbitrarily synthesizing #GP (i.e. don't double down on AMD's
architectural but sketchy behavior of generating #GP for "unsupported"
addresses).
- Cache all used vmcb12 fields to further harden against TOCTOU bugs.
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros.
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate.
- Code cleanups.
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't support
reclaim, the memory is unevictable, and there is no storage to write
back to.
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests.
x86 selftests:
- Add support for Hygon CPUs in KVM selftests.
- Fix a bug in the MSR test where it would get false failures on AMD/Hygon
CPUs with exactly one of RDPID or RDTSCP.
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test for a
bug where the kernel would attempt to collapse guest_memfd folios against
KVM's will.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnftRQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPAzwf+NKO4Ktv+7A22ImN0SBl0nlUuulsz
vTcw3+hxdRoIw83GdNS+hG5js0wrpMDnbv3t4+VliDNBSSxrBzcSWX2wpilW0Xtw
qGo1MWhs2lKPy1NlaRVOwPS6j7uF3AR0TQ1iQLGMedQuCU9WpiKJxyhNXJdbLrt3
8EgFzsvtEsv+jKNRUNDf9+d0j4gZsFyIe+Brhianbw+u3/UCiUClLCdsKPc4+5ZX
08otYXytacGNIf/5Ev1vT4pHkHL0yqKXAtX7LEtaS3+0KrPuLjV4slemivzE9vf5
Evafm5AhA4wpaNMb1ZerhY3T94lsMaJpWxotjR//0Q7C9B59pCQnXCm8mg==
=CcE0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
Zen1's hardware divider can leave, under certain circumstances, partial
results from previous operations. Those results can be leaked by
another, attacker thread.
Fix that with a chicken bit.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Several fixes:
- Add missing static const
- Correct type 1 emulation for VFIO_CHECK_EXTENSION when no-iommu is
turned on
- Fix selftest memory leak and syzkaller splat
- Fix missed -EFAULT in fault reporting write() fops
- Fix a race where map/unmap with the internal IOVA allocator can unmap
things it should not
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaeECkwAKCRCFwuHvBreF
YT5LAQD2DWHgrrgiv3z0X3J+ymvMPIw32hI2J7rAbrR+olAvigEA5adGbQAUI6cC
msu5z8gv6bK1bzcqPbkL8hPlNU0naQQ=
=fe0o
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Several fixes:
- Add missing static const
- Correct type 1 emulation for VFIO_CHECK_EXTENSION when no-iommu is
turned on
- Fix selftest memory leak and syzkaller splat
- Fix missed -EFAULT in fault reporting write() fops
- Fix a race where map/unmap with the internal IOVA allocator can
unmap things it should not"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix a race with concurrent allocation and unmap
iommufd/selftest: Remove MOCK_IOMMUPT_AMDV1 format
iommufd: Fix return value of iommufd_fault_fops_write()
iommufd: update outdated comment for renamed iommufd_hw_pagetable_alloc()
iommufd/selftest: Fix page leaks in mock_viommu_{init,destroy}
iommufd: vfio compatibility extension check for noiommu mode
iommufd: Constify struct dma_buf_attach_ops
- New fwctl driver for Broadcom RDMA NICs
- Bug fix for non-modular builds
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaeDp6gAKCRCFwuHvBreF
YXiBAQCUW1N0n7iTqlkbdbCs3GsI0d78x2dDN7aEc7SKDr/+CgEA69TVKDTLkIJa
CAzwZLkAKjRDUH7PXh65i8svJnwvzAk=
=MoNI
-----END PGP SIGNATURE-----
Merge tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl
Pull fwctl updates from Jason Gunthorpe:
- New fwctl driver for Broadcom RDMA NICs
- Bug fix for non-modular builds
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl:
fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal
fwctl/bnxt_fwctl: Add documentation entries
fwctl/bnxt_fwctl: Add bnxt fwctl device
fwctl/bnxt_en: Create an aux device for fwctl
fwctl/bnxt_en: Refactor aux bus functions to be more generic
fwctl/bnxt_en: Move common definitions to include/linux/bnxt/
These are again very minimal updates:
- A workaround for firmware on Google Nexus 10
- A fix for early debugging on OMAP1
- A rework for Microchip SoC configuration
- Cleanups on OMAP2 an R-Car-Gen2
-----BEGIN PGP SIGNATURE-----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=nOGB
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC ARM code updates from Arnd Bergmann:
"These are again very minimal updates:
- A workaround for firmware on Google Nexus 10
- A fix for early debugging on OMAP1
- A rework for Microchip SoC configuration
- Cleanups on OMAP2 an R-Car-Gen2"
* tag 'soc-arm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: omap2: dead code cleanup in kconfig for ARCH_OMAP4
ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX
arm64: Kconfig: provide a top-level switch for Microchip platforms
ARM: shmobile: rcar-gen2: Use of_phandle_args_equal() helper
ARM: omap: fix all kernel-doc warnings
ARM: omap2: Replace scnprintf with strscpy in omap3_cpuinfo
ARM: samsung: exynos5250: Allow CPU1 to boot
As usual, we enable a number of additional device drivers as loadable
modules, to support the added platforms. The largest change this time
is for OMAP2/3, which were not that well supported in the generic arm32
defconfig.
The Tegra SoC platforms are now enabled by default in Kconfig when
ARCH_TEGRA is enabled, which means the defconfig change is done at
the same time as the Kconfig change here.
-----BEGIN PGP SIGNATURE-----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=OCxO
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, we enable a number of additional device drivers as loadable
modules, to support the added platforms. The largest change this time
is for OMAP2/3, which were not that well supported in the generic
arm32 defconfig.
The Tegra SoC platforms are now enabled by default in Kconfig when
ARCH_TEGRA is enabled, which means the defconfig change is done at the
same time as the Kconfig change here"
* tag 'soc-defconfig-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arch/arm: Drop CONFIG_FIRMWARE_EDID from defconfig files
arm64: defconfig: Enable DP83TG720 PHY driver
arm64: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
ARM: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
arm64: defconfig: enable pci-pwrctrl-generic as module
arm64: defconfig: Enable Lontium LT8713sx driver
arm64: defconfig: Enable Qualcomm Eliza SoC display clock controller
arm64: defconfig: enable IPQ5210 RDP504 base configs
arm64: defconfig: Enable Milos LPASS LPI pinctrl driver
arm64: defconfig: Enable Kaanapali clock controllers
arm64: defconfig: Enable configs for Arduino VENTUNO Q
arm64: defconfig: Enable Qualcomm Eliza basic resource providers
arm64: defconfig: Enable S5KJN1 camera sensor
arm64: defconfig: Enable configurations for Toradex Aquila AM69
arm64: defconfig: remove SENSORS_SA67MCU
arm64: defconfig: Enable Qualcomm WCD937x headphone codec as module
arm64: defconfig: Enable QCOMTEE module for QTEE-enabled Qualcomm SoCs
ARM: shmobile: defconfig: Refresh for v7.0-rc1
arm: multi_v7_defconfig: Enable more OMAP 3/4 related configs
ARM: multi_v7_defconfig: omap2plus_defconfig: Enable ITE IT66121 driver
...
The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change
to how individual Tegra SoCs get selected in Kconfig and
BPMP firmware driver updates including a refresh of the ABI
header to match the version used by firmware
- STM32 updates to the firewall bus driver and support for
the debug bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the
unused Baikal T1 driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmnhCSYACgkQmmx57+YA
GNl2ow/+Pti7qbBE34WNyIuWOgZEzjo1OeLe/Y4LqkQmHcM9FJV3/rCadA/FkmD9
nH85WiRuUjIjzUiAl24SP2nkEcIU/yv8ECvROX46uAjhTByVHkaCedwl3ECW9RPA
IAYiTJPrQBNCmWZuGO4bZ3go6hHn4q4RSd2V8vrCw/J3b+wBSAPTPzsaWnWg4MiL
QYz7sBTwcNJaJuwJ7ZnHN/VgEOs9OgY6ejGJImiaVzBbsH7rNp7Cbs6t88X5rCXS
mbgMvVlYKbsOWj3kNyv98YFAGgzo59uEL+m+846U32w9o0nIgkmIS60RQ5k73JV4
QlhV1uT7PPtu7y7VbxfJ8KISxaRoex/+AZShmAWCul4YK75hEWT3mWGhM8cqeMUQ
U0ogpbekRjKdn2Bgfl6kHf38smusjJ1fOBr8QIZcdDJpEtxYtRmNpLUNNSc5vO+T
HvA79C8I8ydWGyqr1wRP1gDRBNc1BDYKxJO4ohvjnAPIeC01zArXCOyf0F3VtPzH
XSycnyW7eRUVi+4C3/cF8qzhW2y7Wx03ui5mCDIEcOzyVoGNqTrPNsbCvkNkyrdc
jqvWagZ4Ci8jaRxLAawnqHI/stvsHx9V+NPp6p07BsOxJMsuOqO4sInRhh5P6YvM
5wZCFUK37xPEqYvr+BFS9B/4jgw3Mg2Kj+gjxShwsLS5JtVDfZw=
=UB4F
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs,
and two older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and IOT
(QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53 cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores, with
additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using low-end
Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M
or i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last
board specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip
-----BEGIN PGP SIGNATURE-----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=5Dwm
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs, and two
older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and
IOT (QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53
cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores,
with additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using
low-end Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU
cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or
i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last board
specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip"
* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits)
arm64: dts: ti: k3: Use memory-region-names for r5f
ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards
ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif
ARM: dts: imx25: rename node name tcq to touchscreen
ARM: dts: imx: b850v3: Disable unused usdhc4
ARM: dts: imx: b850v3: Define GPIO line names
ARM: dts: imx: b850v3: Use alphabetical sorting
ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning
ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps
ARM: dts: imx7ulp: Add CPU clock and OPP table support
ARM: dts: imx7-mba7: Deassert BOOT_EN after boot
ARM: dts: tqma7: add boot phase properties
ARM: dts: imx7s: add boot phase properties
ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
ARM: dts: mba6ulx: add boot phase properties
ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties
ARM: dts: imx6ul/imx6ull: add boot phase properties
ARM: dts: imx6qdl-mba6: add boot phase properties
ARM: dts: imx6qdl-tqma6: add boot phase properties
ARM: dts: imx6qdl: add boot phase properties
...
Total patches: 126
Reviews/patch: 0.92
Reviewed rate: 76%
- The 2 patch series "pid: make sub-init creation retryable" from Oleg
Nesterov increases the robustness of our creation of init in a new
namespace. By clearing away some historical cruft which is no longer
needed. Also some documentation fixups are provided.
- The 2 patch series "selftests/fchmodat2: Error handling and general"
from Mark Brown has a fixup and a cleanup for the fchmodat2() syscall
selftest.
- The 3 patch series "lib: polynomial: Move to math/ and clean up" from
Andy Shevchenko does as advertised.
- The 3 patch series "hung_task: Provide runtime reset interface for
hung task detector" from Aaron Tomlin gives administrators the ability
to zero out /proc/sys/kernel/hung_task_detect_count.
- The 2 patch series "tools/getdelays: use the static UAPI headers from
tools/include/uapi" from Thomas Weißschuh teaches getdelays to use the
in-kernel UAPI headers rather than the system-provided ones.
- The 5 patch series "watchdog/hardlockup: Improvements to hardlockup"
from Mayank Rungta provides several cleanups and fixups to the
hardlockup detector code and its documentation.
- The 2 patch series "lib/bch: fix undefined behavior from signed
left-shifts" from Josh Law provides a couple of small/theoretical fixes
in the bch code.
- The 2 patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()"
from Junrui Luo does what is claims.
- The 27 patch series "cleanup the RAID5 XOR library" from Christoph
Hellwig is a quite far-reaching cleanup to this code. I can't do better
than to quote Christoph:
The XOR library used for the RAID5 parity is a bit of a mess right
now. The main file sits in crypto/ despite not being cryptography and
not using the crypto API, with the generic implementations sitting in
include/asm-generic and the arch implementations sitting in an asm/
header in theory. The latter doesn't work for many cases, so
architectures often build the code directly into the core kernel, or
create another module for the architecture code.
Change this to a single module in lib/ that also contains the
architecture optimizations, similar to the library work Eric Biggers
has done for the CRC and crypto libraries later. After that it
changes to better calling conventions that allow for smarter
architecture implementations (although none is contained here yet),
and uses static_call to avoid indirection function call overhead.
- The 2 patch series "lib/list_sort: Clean up list_sort() scheduling
workarounds" from Kuan-Wei Chiu cleans up this library code by removing
a hacky thing which was added for UBIFS, which UBIFS doesn't actually
need.
- The 5 patch series "Fix bugs in extract_iter_to_sg()" from Christian
Ehrhardt fixes a few bugs in the scatterlist code, adds in-kernel tests
for the now-fixed bugs and fixes a leak in the test itself.
- The 3 patch series "kdump: Enable LUKS-encrypted dump target support
in ARM64 and PowerPC" from Coiby Xu eenables support of the
LUKS-encrypted device dump target on arm64 and powerpc.
- The 4 patch series "ocfs2: consolidate extent list validation into
block read callbacks" from Joseph Qi addresses ocfs2's validation of
extent list fields - cleanup, simplification, robustness. (Kernel test
robot loves mounting corrupted fs images!)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCad90rQAKCRDdBJ7gKXxA
jl7rAQD4/Rq7ZSSnEv6FS4gOwc3MgTdWcZZaXkqL1KiWyYhRwAEA+cVCO344+AKb
znBOjet/hUr+/kBwyViifiC8LHzchwM=
=Nfnf
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "pid: make sub-init creation retryable" (Oleg Nesterov)
Make creation of init in a new namespace more robust by clearing away
some historical cruft which is no longer needed. Also some
documentation fixups
- "selftests/fchmodat2: Error handling and general" (Mark Brown)
Fix and a cleanup for the fchmodat2() syscall selftest
- "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko)
- "hung_task: Provide runtime reset interface for hung task detector"
(Aaron Tomlin)
Give administrators the ability to zero out
/proc/sys/kernel/hung_task_detect_count
- "tools/getdelays: use the static UAPI headers from
tools/include/uapi" (Thomas Weißschuh)
Teach getdelays to use the in-kernel UAPI headers rather than the
system-provided ones
- "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta)
Several cleanups and fixups to the hardlockup detector code and its
documentation
- "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law)
A couple of small/theoretical fixes in the bch code
- "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo)
- "cleanup the RAID5 XOR library" (Christoph Hellwig)
A quite far-reaching cleanup to this code. I can't do better than to
quote Christoph:
"The XOR library used for the RAID5 parity is a bit of a mess right
now. The main file sits in crypto/ despite not being cryptography
and not using the crypto API, with the generic implementations
sitting in include/asm-generic and the arch implementations
sitting in an asm/ header in theory. The latter doesn't work for
many cases, so architectures often build the code directly into
the core kernel, or create another module for the architecture
code.
Change this to a single module in lib/ that also contains the
architecture optimizations, similar to the library work Eric
Biggers has done for the CRC and crypto libraries later. After
that it changes to better calling conventions that allow for
smarter architecture implementations (although none is contained
here yet), and uses static_call to avoid indirection function call
overhead"
- "lib/list_sort: Clean up list_sort() scheduling workarounds"
(Kuan-Wei Chiu)
Clean up this library code by removing a hacky thing which was added
for UBIFS, which UBIFS doesn't actually need
- "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt)
Fix a few bugs in the scatterlist code, add in-kernel tests for the
now-fixed bugs and fix a leak in the test itself
- "kdump: Enable LUKS-encrypted dump target support in ARM64 and
PowerPC" (Coiby Xu)
Enable support of the LUKS-encrypted device dump target on arm64 and
powerpc
- "ocfs2: consolidate extent list validation into block read callbacks"
(Joseph Qi)
Cleanup, simplify, and make more robust ocfs2's validation of extent
list fields (Kernel test robot loves mounting corrupted fs images!)
* tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (127 commits)
ocfs2: validate group add input before caching
ocfs2: validate bg_bits during freefrag scan
ocfs2: fix listxattr handling when the buffer is full
doc: watchdog: fix typos etc
update Sean's email address
ocfs2: use get_random_u32() where appropriate
ocfs2: split transactions in dio completion to avoid credit exhaustion
ocfs2: remove redundant l_next_free_rec check in __ocfs2_find_path()
ocfs2: validate extent block list fields during block read
ocfs2: remove empty extent list check in ocfs2_dx_dir_lookup_rec()
ocfs2: validate dx_root extent list fields during block read
ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
ocfs2: handle invalid dinode in ocfs2_group_extend
.get_maintainer.ignore: add Askar
ocfs2: validate bg_list extent bounds in discontig groups
checkpatch: exclude forward declarations of const structs
tools/accounting: handle truncated taskstats netlink messages
taskstats: set version in TGID exit notifications
ocfs2/heartbeat: fix slot mapping rollback leaks on error paths
arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel
...
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmng/MsACgkQiiy9cAdy
T1GzBAv/VSB8lYI7tq96H8Cpr4P8IPekLkW3RYuqBDZDxsSHNy3SLft2dvY4yHmd
iAh+ngOHUTl/i1LcVghBZCSX3R13fcocATTWT0WbgLb3WO2W7N8lCdSLoNV0ZehH
tOeClUipq511zMIUb4aSPNX9QP62RlkpvXb+L91KNcnurHxJj5vz67/gA5jHbnfQ
NFe0xDyeQoiYXBpZiSpFVE6d06S+OHM1PpGx8a9MXWyVec3NtBNbUJLQaeHDm9gX
EUUwvpoW+GU6h6SWoBx+byWyO43mAvXnTO0MLZg1G150X6eUvoJn9L3WE5dKBN4s
LEJ2iAVqXM8pNgnwtIzGQfqjyACuTvBzMIjYfmhkhUB6G6J4JTSPDimJ9HxEJlE2
6Bbb7rDnWp2Z/W3Bu0hQrInQrbWj+9ncc2CWGqgVeGQsLO1Z4rOSvndyoGjXHsLj
shRbcS2RQ1yBrwnEvcfqI1cPiakmv6EGJufGjimaK2I6Kd0WUw5cr9fsEO5NilGO
QKiIV1Qk
=9ytE
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc1-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix integer underflow in encrypted read
- Four debug patches, adding a few tracepoints
- Minor update to MAINTAINERS file (preferred server URL for cifs)
- Remove the BUG_ON() calls in d_mark_tmpfile_name
* tag 'v7.1-rc1-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
MAINTAINERS: change git.samba.org to https
smb: client: fix integer underflow in receive_encrypted_read()
smb: client: add tracepoints for deferred handle caching
smb: client: add oplock level to smb3_open_done tracepoint
smb: client: add tracepoint for local lock conflicts
smb: client: add tracepoints for lock operations
vfs: get rid of BUG_ON() in d_mark_tmpfile_name()
-----BEGIN PGP SIGNATURE-----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=LN0P
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc-part1-smbdirect-fixes' of git://git.samba.org/ksmbd
Pull smbdirect updates from Steve French:
"Move smbdirect server and client code to common directory:
- temporary use of smbdirect_all_c_files.c to allow micro steps
- factor out common functions into a smbdirect.ko.
- convert cifs.ko to use smbdirect.ko
- convert ksmbd.ko to use smbdirect.ko
- let smbdirect.ko use global workqueues
- move ib_client logic from ksmbd.ko into smbdirect.ko
- remove smbdirect_all_c_files.c hack again
- some locking and teardown related fixes on top"
* tag 'v7.1-rc-part1-smbdirect-fixes' of git://git.samba.org/ksmbd: (145 commits)
smb: smbdirect: let smbdirect_connection_deregister_mr_io unlock while waiting
smb: smbdirect: fix the logic in smbdirect_socket_destroy_sync() without an error
smb: smbdirect: fix copyright header of smbdirect.h
smb: smbdirect: change smbdirect_socket_parameters.{initiator_depth,responder_resources} to __u16
smb: smbdirect: remove unused SMBDIRECT_USE_INLINE_C_FILES logic
smb: server: no longer use smbdirect_socket_set_custom_workqueue()
smb: client: no longer use smbdirect_socket_set_custom_workqueue()
smb: smbdirect: introduce global workqueues
smb: smbdirect: prepare use of dedicated workqueues for different steps
smb: smbdirect: remove unused smbdirect_connection_mr_io_recovery_work()
smb: smbdirect: wrap rdma_disconnect() in rdma_[un]lock_handler()
smb: server: make use of smbdirect_netdev_rdma_capable_mode_type()
smb: smbdirect: introduce smbdirect_netdev_rdma_capable_mode_type()
smb: server: make use of smbdirect.ko
smb: server: remove unused ksmbd_transport_ops.prepare()
smb: server: make use of smbdirect_socket_{listen,accept}()
smb: server: only use public smbdirect functions
smb: server: make use of smbdirect_socket_create_accepting()/smbdirect_socket_release()
smb: server: make use of smbdirect_{socket_init_accepting,connection_wait_for_connected}()
smb: server: make use of smbdirect_connection_send_iter() and related functions
...
-----BEGIN PGP SIGNATURE-----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=KJTH
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Add two new selftests
* tag 'livepatching-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: add test for module function patching
selftests: livepatch: test-ftrace: livepatch a traced function
- Add support for QEMU virt-ctrl, and use it for system reset and
power off on the virt platform,
- Defconfig updates,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaeCVXwAKCRCKwlD9ZEnx
cIhWAQCxwoddlBD7QRpLvcrtbrL20poOfGtf5pY3VZaohEbzzwEAlCnp0TnwuEES
gSKc5MVGDx9x6YdwyeFEX4PTU882YwI=
=kV2B
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Add support for QEMU virt-ctrl, and use it for system reset
and power off on the virt platform
- defconfig updates
- Miscellaneous fixes and improvements
* tag 'm68k-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: virt: Switch to qemu-virt-ctrl driver
power: reset: Add QEMU virt-ctrl driver
m68k: defconfig: Update defconfigs for v7.0-rc1
m68k: emu: Replace unbounded sprintf() in nfhd_init_one()
m68k: uapi: Add ucontext.h
m68k: defconfig: hp300: Enable monochrome and 16-color linux logos
m68k: q40: Remove commented out code
- Enable boot graphics resource table (BGRT) on Xen/x86
- Correct a misguided assumption in the memory attributes table sanity
check
- Start tagging efi_mem_reserve()'d regions as MEMBLOCK_RSRV_KERN
- Some other minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCad5qMAAKCRAwbglWLn0t
XKXwAPsEN7Wf8bXV0ecRTKk7TlEUYUoWWZ7Xpf/Dpee20fAFvwEAiKckvbO6jh8u
5erC3UsT6tAZb+RWXR6ct3ljBr9SuA8=
=Atcd
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Again not a busy cycle for EFI, just some minor tweaks and bug fixes:
- Enable boot graphics resource table (BGRT) on Xen/x86
- Correct a misguided assumption in the memory attributes table
sanity check
- Start tagging efi_mem_reserve()'d regions as MEMBLOCK_RSRV_KERN
- Some other minor fixes and cleanups"
* tag 'efi-next-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/capsule-loader: fix incorrect sizeof in phys array reallocation
efi: Tag memblock reservations of boot services regions as RSRV_KERN
memblock: Permit existing reserved regions to be marked RSRV_KERN
efi/memattr: Fix thinko in table size sanity check
efi: libstub: fix type of fdt 32 and 64bit variables
efi: Drop unused efi_range_is_wc() function
efi: Enable BGRT loading under Xen
efi: make efi_mem_type() and efi_mem_attributes() work on Xen PV
- Update QAT vfio-pci variant driver for Gen 5, 420xx devices.
(Vijay Sundar Selvamani, Suman Kumar Chakraborty, Giovanni Cabiddu)
- Fix vfio selftest MMIO DMA mapping selftest. (Alex Mastro)
- Conversions to const struct class in support of class_create()
deprecation. (Jori Koolstra)
- Improve selftest compiler compatibility by avoiding initializer
on variable-length array. (Manish Honap)
- Define new uAPI for drivers supporting migration to advise user-
space of new initial data for reducing target startup latency.
Implemented for mlx5 vfio-pci variant driver. (Yishai Hadas)
- Enable vfio selftests on aarch64, not just cross-compiles reporting
arm64. (Ted Logan)
- Update vfio selftest driver support to include additional DSA
devices. (Yi Lai)
- Unconditionally include debugfs root pointer in vfio device struct,
avoiding a build failure seen in hisi_acc variant driver without
debugfs otherwise. (Arnd Bergmann)
- Add support for the s390 ISM (Internal Shared Memory) device via
a new variant driver. The device is unique in the size of its BAR
space (256TiB) and lack of mmap support. (Julian Ruess)
- Enforce that vfio-pci drivers implement a name in their ops
structure for use in sequestering SR-IOV VFs. (Alex Williamson)
- Prune leftover group notifier code. (Paolo Bonzini)
- Fix Xe vfio-pci variant driver to avoid migration support as a
dependency in the reset path and missing release call.
(Michał Winiarski)
-----BEGIN PGP SIGNATURE-----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=NYEM
-----END PGP SIGNATURE-----
Merge tag 'vfio-v7.1-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Update QAT vfio-pci variant driver for Gen 5, 420xx devices (Vijay
Sundar Selvamani, Suman Kumar Chakraborty, Giovanni Cabiddu)
- Fix vfio selftest MMIO DMA mapping selftest (Alex Mastro)
- Conversions to const struct class in support of class_create()
deprecation (Jori Koolstra)
- Improve selftest compiler compatibility by avoiding initializer on
variable-length array (Manish Honap)
- Define new uAPI for drivers supporting migration to advise user-
space of new initial data for reducing target startup latency.
Implemented for mlx5 vfio-pci variant driver (Yishai Hadas)
- Enable vfio selftests on aarch64, not just cross-compiles reporting
arm64 (Ted Logan)
- Update vfio selftest driver support to include additional DSA devices
(Yi Lai)
- Unconditionally include debugfs root pointer in vfio device struct,
avoiding a build failure seen in hisi_acc variant driver without
debugfs otherwise (Arnd Bergmann)
- Add support for the s390 ISM (Internal Shared Memory) device via a
new variant driver. The device is unique in the size of its BAR space
(256TiB) and lack of mmap support (Julian Ruess)
- Enforce that vfio-pci drivers implement a name in their ops structure
for use in sequestering SR-IOV VFs (Alex Williamson)
- Prune leftover group notifier code (Paolo Bonzini)
- Fix Xe vfio-pci variant driver to avoid migration support as a
dependency in the reset path and missing release call (Michał
Winiarski)
* tag 'vfio-v7.1-rc1' of https://github.com/awilliam/linux-vfio: (23 commits)
vfio/xe: Add a missing vfio_pci_core_release_dev()
vfio/xe: Reorganize the init to decouple migration from reset
vfio: remove dead notifier code
vfio/pci: Require vfio_device_ops.name
MAINTAINERS: add VFIO ISM PCI DRIVER section
vfio/ism: Implement vfio_pci driver for ISM devices
vfio/pci: Rename vfio_config_do_rw() to vfio_pci_config_rw_single() and export it
vfio: unhide vdev->debug_root
vfio/qat: add support for Intel QAT 420xx VFs
vfio: selftests: Support DMR and GNR-D DSA devices
vfio: selftests: Build tests on aarch64
vfio/mlx5: Add REINIT support to VFIO_MIG_GET_PRECOPY_INFO
vfio/mlx5: consider inflight SAVE during PRE_COPY
net/mlx5: Add IFC bits for migration state
vfio: Adapt drivers to use the core helper vfio_check_precopy_ioctl
vfio: Add support for VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2
vfio: Define uAPI for re-init initial bytes during the PRE_COPY phase
vfio: selftests: Fix VLA initialisation in vfio_pci_irq_set()
vfio: uapi: fix comment typo
vfio: mdev: replace mtty_dev->vd_class with a const struct class
...
We should not hold a mutex locked during wait_for_completion()
holding a reference is enough.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Henrique Carvalho <henrique.carvalho@suse.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If smbdirect_socket_destroy_sync() and sc->first_error was not set
we should set -ESHUTDOWN, that's a better condition
doing it only implicitly with the
sc->status < SMBDIRECT_SOCKET_DISCONNECTING check.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Henrique Carvalho <henrique.carvalho@suse.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Everything in smbdirect.h was taken from my out of
tree prototype.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Henrique Carvalho <henrique.carvalho@suse.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We still limit this to U8_MAX as the rdma api only uses __u8
and that's also the limit for Infiniband and RoCE*,
while iWarp would be able to support larger values at
the protocol level.
As struct smbdirect_socket_parameters will be part
of the uapi for IPPROTO_SMBDIRECT in future, change it
now even if userspace sockets won't be supported yet.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We always build as standalone module (or as part of the core kernel).
This also removes unused elements from struct smbdirect_socket
and unused exports.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smbdirect.ko has global workqueues now, so we should use these
default once.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smbdirect.ko has global workqueues now, so we should use these
default once.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
These will be used in future and callers should no
longer use smbdirect_socket_set_custom_workqueue().
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is a preparation in order to have global workqueues in
the smbdirect module instead of having the caller to
provide one.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This would actually never be used as we only move to
SMBDIRECT_MR_ERROR when we directly call
smbdirect_socket_schedule_cleanup().
Doing an ib_dereg_mr/ib_alloc_mr dance on
working connection is not needed and
it's also pointless on a broken connection
as we don't reuse any ib_pd.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This might not be needed, but it controls the order
of ib_drain_qp() and rdma_disconnect().
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This removes is basically the same logic.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is basically a copy of ksmbd_rdma_capable_netdev() in the
server, but this also prints a message when a device is renamed.
The differences are:
- It uses rdma_for_each_port() instead of implementing the
same logic again.
- It returns RDMA_NODE_{UNSPECIFIED,IB_CA,RNIC} values instead of bool
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This means we no longer inline the common smbdirect
.c files and use the exported functions from the
module instead.
Note the connection specific logging is still
redirect to ksmbd.ko functions via
smbdirect_socket_set_logging().
We still don't use real socket layer,
but we're very close...
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is no longer needed for smbdirect.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We no longer need the custom rdma listener.
The code logic is very similar to transport_tcp.c now
using a kernel thread that loops over smbdirect_socket_accept().
This is the first step in the direction of using IPPROTO_SMBDIRECT
sockets in future.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Also remove a lot of unused includes...
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
With this we no longer embed struct smbdirect_socket, which will allow
us to make it private in the following commits.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This means we finally only use common functions in the server.
We still use the embedded struct smbdirect_socket and are
able to access internals, but the will be removed in the
next commits as well.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This makes use of common code for sending messages, this will
allow to make more use of common code in the next commits.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This make it easier moving to common code shared with the client.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will help to move to common code in future.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smbdirect_map_sges_from_iter() already handles the case that only
a limited number of sges are available. Its return value
is data_length and the remaining bytes in the iter are
remaining_data_length.
This is now much easier and will allow us to share
more code with the client soon.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The point is that ib_dma_map_single() is done first, but
the 'Fill in the packet header' will be done after
smbdirect_map_sges_from_iter().
This will simplify further changes in order to
share common code with the client.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will allow us to make the code more generic in order
to move it to common with the client.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will help to share more common code soon.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is already used by the client too and will
help to share more common code.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is basically the same logic, it just operates on iov_iter_kvec()
instead of a raw buffer pointer. This allows us to use common
code between client and server.
We keep returning -EINTR instead of -ERESTARTSYS if
wait_event_interruptible() fails. I don't if this is
required, but changing it is a task for another patch.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is basically the same logic as before, but we now
use common code, which will also be used by the server soon.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The copied code only got new names, some indentation/formatting changes,
some variable names are changed too.
They also only use struct smbdirect_socket instead of
struct smb_direct_transport.
But the logic is still the same.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will allow us to share more common code between client and
server soon.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will allow us to move code into common code
between client and server soon.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is basically a copy of smb_direct_post_recv_credits(), but
there are several improvements compared to the existing function:
1. We calculate the number of missing posted buffers by getting the
difference between recv_io.credits.target and recv_io.posted.count.
Instead of the difference between recv_io.credits.target
and recv_io.credits.count, because recv_io.credits.count is
only updated once a message is send to the peer.
It was not really a problem before, because we have
a fixed number smbdirect_recv_io buffers, so the
loop terminated when smbdirect_connection_get_recv_io()
returns NULL.
But using recv_io.posted.count makes it easier to
understand.
2. In order to tell the peer about the newly posted buffer
and grant the credits, we only trigger the send immediate
when we're not granting only the last possible credit.
This is mostly a difference relative to the servers
smb_direct_post_recv_credits() implementation,
which should avoid useless ping pong messages.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The only difference is that smbdirect_connection_post_recv_io()
returns early if the connection is already broken.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
