The additional resources allocated with clk_register_fixed_rate() need
to be released with clk_unregister_fixed_rate(), otherwise they are lost.
Fixes: 83a77e9ec4 ("net: macb: Added PCI wrapper for Platform Driver.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260330184542.626619-2-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
platform_device_unregister() may still want to use the registered clks
during runtime resume callback.
Note that there is a commit d82d5303c4 ("net: macb: fix use after free
on rmmod") that addressed the similar problem of clk vs platform device
unregistration but just moved the bug to another place.
Save the pointers to clks into local variables for reuse after platform
device is unregistered.
BUG: KASAN: use-after-free in clk_prepare+0x5a/0x60
Read of size 8 at addr ffff888104f85e00 by task modprobe/597
CPU: 2 PID: 597 Comm: modprobe Not tainted 6.1.164+ #114
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xba
print_report+0x17f/0x496
kasan_report+0xd9/0x180
clk_prepare+0x5a/0x60
macb_runtime_resume+0x13d/0x410 [macb]
pm_generic_runtime_resume+0x97/0xd0
__rpm_callback+0xc8/0x4d0
rpm_callback+0xf6/0x230
rpm_resume+0xeeb/0x1a70
__pm_runtime_resume+0xb4/0x170
bus_remove_device+0x2e3/0x4b0
device_del+0x5b3/0xdc0
platform_device_del+0x4e/0x280
platform_device_unregister+0x11/0x50
pci_device_remove+0xae/0x210
device_remove+0xcb/0x180
device_release_driver_internal+0x529/0x770
driver_detach+0xd4/0x1a0
bus_remove_driver+0x135/0x260
driver_unregister+0x72/0xb0
pci_unregister_driver+0x26/0x220
__do_sys_delete_module+0x32e/0x550
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
</TASK>
Allocated by task 519:
kasan_save_stack+0x2c/0x50
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x8e/0x90
__clk_register+0x458/0x2890
clk_hw_register+0x1a/0x60
__clk_hw_register_fixed_rate+0x255/0x410
clk_register_fixed_rate+0x3c/0xa0
macb_probe+0x1d8/0x42e [macb_pci]
local_pci_probe+0xd7/0x190
pci_device_probe+0x252/0x600
really_probe+0x255/0x7f0
__driver_probe_device+0x1ee/0x330
driver_probe_device+0x4c/0x1f0
__driver_attach+0x1df/0x4e0
bus_for_each_dev+0x15d/0x1f0
bus_add_driver+0x486/0x5e0
driver_register+0x23a/0x3d0
do_one_initcall+0xfd/0x4d0
do_init_module+0x18b/0x5a0
load_module+0x5663/0x7950
__do_sys_finit_module+0x101/0x180
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 597:
kasan_save_stack+0x2c/0x50
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x106/0x180
__kmem_cache_free+0xbc/0x320
clk_unregister+0x6de/0x8d0
macb_remove+0x73/0xc0 [macb_pci]
pci_device_remove+0xae/0x210
device_remove+0xcb/0x180
device_release_driver_internal+0x529/0x770
driver_detach+0xd4/0x1a0
bus_remove_driver+0x135/0x260
driver_unregister+0x72/0xb0
pci_unregister_driver+0x26/0x220
__do_sys_delete_module+0x32e/0x550
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Fixes: d82d5303c4 ("net: macb: fix use after free on rmmod")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260330184542.626619-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_max_key_size in the virtio spec is the maximum key size supported by
the device, not a mandatory size the driver must use. Also the value 40
is a spec minimum, not a spec maximum.
The current code rejects RSS and can fail probe when the device reports a
larger rss_max_key_size than the driver buffer limit. Instead, clamp the
effective key length to min(device rss_max_key_size, NETDEV_RSS_KEY_LEN)
and keep RSS enabled.
This keeps probe working on devices that advertise larger maximum key sizes
while respecting the netdev RSS key buffer size limit.
Fixes: 3f7d9c1964 ("virtio_net: Add hash_key_length check")
Cc: stable@vger.kernel.org
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260326142344.1171317-1-schalla@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic.
Fixes: c865e5d99e ("[PKT_SCHED] netem: packet corruption option")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yuhang Zheng <z1652074432@gmail.com>
Signed-off-by: Yucheng Lu <kanolyc@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/45435c0935df877853a81e6d06205ac738ec65fa.1774941614.git.kanolyc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=J6YS
-----END PGP SIGNATURE-----
Merge tag 'nf-26-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net. Note that most
of the bugs fixed here are >5 years old. The large PR is not due to an
increase in regressions.
1) Flowtable hardware offload support in IPv6 can lead to out-of-bounds
when populating the rule action array when combined with double-tagged
vlan. Bump the maximum number of actions from 16 to 24 and check that
such limit is never reached, otherwise bail out. This bugs stems from
the original flowtable hardware offload support.
2) nfnetlink_log does not include the netlink header size of the trailing
NLMSG_DONE message when calculating the skb size. From Florian Westphal.
3) Reject names in xt_cgroup and xt_rateest extensions which are not
nul-terminated. Also from Florian.
4) Use nla_strcmp in ipset lookup by set name, since IPSET_ATTR_NAME and
IPSET_ATTR_NAMEREF are of NLA_STRING type. From Florian Westphal.
5) When unregistering conntrack helpers, pass the helper that is going
away so the expectation cleanup is done accordingly, otherwise UaF is
possible when accessing expectation that refer to the helper that is
gone. From Qi Tang.
6) Zero expectation NAT fields to address leaking kernel memory through
the expectation netlink dump when unset. Also from Qi Tang.
7) Use the master conntrack helper when creating expectations via
ctnetlink, ignore the suggested helper through CTA_EXPECT_HELP_NAME.
This allows to address a possible read of kernel memory off the
expectation object boundary.
8) Fix incorrect release of the hash bucket logic in ipset when the
bucket is empty, leading to shrinking the hash bucket to size 0
which deals to out-of-bound write in next element additions.
From Yifan Wu.
9) Allow the use of x_tables extensions that explicitly declare
NFPROTO_ARP support only. This is to avoid an incorrect hook number
validation due to non-overlapping arp and inet hook number
definitions.
10) Reject immediate NF_QUEUE verdict in nf_tables. The userspace
nft tool always uses the nft_queue expression for queueing.
This ensures this verdict cannot be used for the arp family,
which does supported this.
* tag 'nf-26-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: reject immediate NF_QUEUE verdict
netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP
netfilter: ipset: drop logically empty buckets in mtype_del
netfilter: ctnetlink: ignore explicit helper on new expectations
netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent
netfilter: nf_conntrack_helper: pass helper to expect cleanup
netfilter: ipset: use nla_strcmp for IPSET_ATTR_NAME attr
netfilter: x_tables: ensure names are nul-terminated
netfilter: nfnetlink_log: account for netlink header size
netfilter: flowtable: strictly check for maximum number of actions
====================
Link: https://patch.msgid.link/20260401103646.1015423-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data
and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a
fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with
i_cm_id = NULL because the connection worker has not yet called
rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with
RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses
the control message before any connection establishment, allowing
rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the
kernel.
The existing guard in rds_ib_reg_frmr() only checks for !ic (added in
commit 9e630bcb77), which does not catch this case since ic is allocated
early and is always non-NULL once the connection object exists.
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920
Call Trace:
rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167)
rds_ib_map_frmr (net/rds/ib_frmr.c:252)
rds_ib_reg_frmr (net/rds/ib_frmr.c:430)
rds_ib_get_mr (net/rds/ib_rdma.c:615)
__rds_rdma_map (net/rds/rdma.c:295)
rds_cmsg_rdma_map (net/rds/rdma.c:860)
rds_sendmsg (net/rds/send.c:1363)
____sys_sendmsg
do_syscall_64
Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all
non-NULL before proceeding with FRMR registration, mirroring the guard
already present in rds_ib_post_inv(). Return -ENODEV when the connection
is not ready, which the existing error handling in rds_cmsg_send() converts
to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to
start the connection worker.
Fixes: 1659185fb4 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260330163237.2752440-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib6_metric_set() may be called concurrently from softirq context without
holding the FIB table lock. A typical path is:
ndisc_router_discovery()
spin_unlock_bh(&table->tb6_lock) <- lock released
fib6_metric_set(rt, RTAX_HOPLIMIT, ...) <- lockless call
When two CPUs process Router Advertisement packets for the same router
simultaneously, they can both arrive at fib6_metric_set() with the same
fib6_info pointer whose fib6_metrics still points to dst_default_metrics.
if (f6i->fib6_metrics == &dst_default_metrics) { /* both CPUs: true */
struct dst_metrics *p = kzalloc_obj(*p, GFP_ATOMIC);
refcount_set(&p->refcnt, 1);
f6i->fib6_metrics = p; /* CPU1 overwrites CPU0's p -> p0 leaked */
}
The dst_metrics allocated by the losing CPU has refcnt=1 but no pointer
to it anywhere in memory, producing a kmemleak report:
unreferenced object 0xff1100025aca1400 (size 96):
comm "softirq", pid 0, jiffies 4299271239
backtrace:
kmalloc_trace+0x28a/0x380
fib6_metric_set+0xcd/0x180
ndisc_router_discovery+0x12dc/0x24b0
icmpv6_rcv+0xc16/0x1360
Fix this by:
- Set val for p->metrics before published via cmpxchg() so the metrics
value is ready before the pointer becomes visible to other CPUs.
- Replace the plain pointer store with cmpxchg() and free the allocation
safely when competition failed.
- Add READ_ONCE()/WRITE_ONCE() for metrics[] setting in the non-default
metrics path to prevent compiler-based data races.
Fixes: d4ead6b34b ("net/ipv6: move metrics from dst to rt6_info")
Reported-by: Fei Liu <feliu@redhat.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260331-b4-fib6_metric_set-kmemleak-v3-1-88d27f4d8825@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hci_le_big_create_sync() uses DEFINE_FLEX to allocate a
struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17)
BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31)
entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller
hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31,
the memcpy that copies conn->bis into cp->bis writes up to 14 bytes
past the stack buffer, corrupting adjacent stack memory.
This is trivially reproducible: binding an ISO socket with
bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will
eventually trigger hci_le_big_create_sync() from the HCI command
sync worker, causing a KASAN-detectable stack-out-of-bounds write:
BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0
Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71
Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to
HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that
conn->bis can actually carry.
Fixes: 42ecf19471 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Cc: stable@vger.kernel.org
Signed-off-by: hkbinbin <hkbinbinbin@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing result.
This also keeps the legacy path aligned with the Secure Connections code,
which already treats JUST_WORKS/JUST_CFM as unauthenticated.
Fixes: fff3490f47 ("Bluetooth: Fix setting correct authentication information for SMP STK")
Cc: stable@vger.kernel.org
Signed-off-by: Oleh Konko <security@1seal.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned.
Fixes: 2b64d153a0 ("Bluetooth: Add MITM mechanism to LE-SMP")
Cc: stable@vger.kernel.org
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Oleh Konko <security@1seal.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mesh_send() currently bounds MGMT_OP_MESH_SEND by total command
length, but it never verifies that the bytes supplied for the
flexible adv_data[] array actually match the embedded adv_data_len
field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a
truncated command can still pass the existing 20..50 byte range
check and later drive the async mesh send path past the end of the
queued command buffer.
Keep rejecting zero-length and oversized advertising payloads, but
validate adv_data_len explicitly and require the command length to
exactly match the flexible array size before queueing the request.
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn lookup and field access must be covered by hdev lock in
hci_le_remote_conn_param_req_evt, otherwise it's possible it is freed
concurrently.
Extend the hci_dev_lock critical section to cover all conn usage.
Fixes: 95118dd4ed ("Bluetooth: hci_event: Use of a function table to handle LE subevents")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn lookup and field access must be covered by hdev lock in
set_cig_params_sync, otherwise it's possible it is freed concurrently.
Take hdev lock to prevent hci_conn from being deleted or modified
concurrently. Just RCU lock is not suitable here, as we also want to
avoid "tearing" in the configuration.
Fixes: a091289218 ("Bluetooth: hci_conn: Fix hci_le_set_cig_params")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Load Long Term Keys stores the user-provided enc_size and later uses
it to size fixed-size stack operations when replying to LE LTK
requests. An enc_size larger than the 16-byte key buffer can therefore
overflow the reply stack buffer.
Reject oversized enc_size values while validating the management LTK
record so invalid keys never reach the stored key state.
Fixes: 346af67b8d ("Bluetooth: Add MGMT handlers for dealing with SMP LTK's")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit 5df5dafc17 ("Bluetooth: hci_uart: Fix another race during
initialization") fixed a race for hci commands sent during initialization.
However, there is still a race that happens if an hci event from one of
these commands is received before HCI_UART_REGISTERED has been set at
the end of hci_uart_register_dev(). The event will be ignored which
causes the command to fail with a timeout in the log:
"Bluetooth: hci0: command 0x1003 tx timeout"
This is because the hci event receive path (hci_uart_tty_receive ->
h4_recv) requires HCI_UART_REGISTERED to be set in h4_recv(), while the
hci command transmit path (hci_uart_send_frame -> h4_enqueue) only
requires HCI_UART_PROTO_INIT to be set in hci_uart_send_frame().
The check for HCI_UART_REGISTERED was originally added in commit
c257820291 ("Bluetooth: Fix H4 crash from incoming UART packets")
to fix a crash caused by hu->hdev being null dereferenced. That can no
longer happen: once HCI_UART_PROTO_INIT is set in hci_uart_register_dev()
all pointers (hu, hu->priv and hu->hdev) are valid, and
hci_uart_tty_receive() already calls h4_recv() on HCI_UART_PROTO_INIT
or HCI_UART_PROTO_READY.
Remove the check for HCI_UART_REGISTERED in h4_recv() to fix the race
condition.
Fixes: 5df5dafc17 ("Bluetooth: hci_uart: Fix another race during initialization")
Signed-off-by: Jonathan Rissanen <jonathan.rissanen@axis.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When hci_cmd_sync_queue_once() returns with error, the destroy callback
will not be called.
Fix leaking references / memory on these failures.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_queue_once() needs to indicate whether a queue item was
added, so caller can know if callbacks are called, so it can avoid
leaking resources.
Change the function to return -EEXIST if queue item already exists.
Modify all callsites to handle that.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_store_wake_reason() is called from hci_event_packet() immediately
after stripping the HCI event header but before hci_event_func()
enforces the per-event minimum payload length from hci_ev_table.
This means a short HCI event frame can reach bacpy() before any bounds
check runs.
Rather than duplicating skb parsing and per-event length checks inside
hci_store_wake_reason(), move wake-address storage into the individual
event handlers after their existing event-length validation has
succeeded. Convert hci_store_wake_reason() into a small helper that only
stores an already-validated bdaddr while the caller holds hci_dev_lock().
Use the same helper after hci_event_func() with a NULL address to
preserve the existing unexpected-wake fallback semantics when no
validated event handler records a wake address.
Annotate the helper with __must_hold(&hdev->lock) and add
lockdep_assert_held(&hdev->lock) so future call paths keep the lock
contract explicit.
Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(),
hci_sync_conn_complete_evt(), le_conn_complete_evt(),
hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(),
hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and
hci_le_past_received_evt().
Fixes: 2f20216c1d ("Bluetooth: Emit controller suspend and resume events")
Cc: stable@vger.kernel.org
Signed-off-by: Oleh Konko <security@1seal.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sco_sock_connect() checks sk_state and sk_type without holding
the socket lock. Two concurrent connect() syscalls on the same
socket can both pass the check and enter sco_connect(), leading
to use-after-free.
The buggy scenario involves three participants and was confirmed
with additional logging instrumentation:
Thread A (connect): HCI disconnect: Thread B (connect):
sco_sock_connect(sk) sco_sock_connect(sk)
sk_state==BT_OPEN sk_state==BT_OPEN
(pass, no lock) (pass, no lock)
sco_connect(sk): sco_connect(sk):
hci_dev_lock hci_dev_lock
hci_connect_sco <- blocked
-> hcon1
sco_conn_add->conn1
lock_sock(sk)
sco_chan_add:
conn1->sk = sk
sk->conn = conn1
sk_state=BT_CONNECT
release_sock
hci_dev_unlock
hci_dev_lock
sco_conn_del:
lock_sock(sk)
sco_chan_del:
sk->conn=NULL
conn1->sk=NULL
sk_state=
BT_CLOSED
SOCK_ZAPPED
release_sock
hci_dev_unlock
(unblocked)
hci_connect_sco
-> hcon2
sco_conn_add
-> conn2
lock_sock(sk)
sco_chan_add:
sk->conn=conn2
sk_state=
BT_CONNECT
// zombie sk!
release_sock
hci_dev_unlock
Thread B revives a BT_CLOSED + SOCK_ZAPPED socket back to
BT_CONNECT. Subsequent cleanup triggers double sock_put() and
use-after-free. Meanwhile conn1 is leaked as it was orphaned
when sco_conn_del() cleared the association.
Fix this by:
- Moving lock_sock() before the sk_state/sk_type checks in
sco_sock_connect() to serialize concurrent connect attempts
- Fixing the sk_type != SOCK_SEQPACKET check to actually
return the error instead of just assigning it
- Adding a state re-check in sco_connect() after lock_sock()
to catch state changes during the window between the locks
- Adding sco_pi(sk)->conn check in sco_chan_add() to prevent
double-attach of a socket to multiple connections
- Adding hci_conn_drop() on sco_chan_add failure to prevent
HCI connection leaks
Fixes: 9a8ec9e8eb ("Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm")
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_run() may run the work immediately if called from existing
sync work (otherwise it queues a new sync work). In this case it fails
to call the destroy() function.
On immediate run, make it behave same way as if item was queued
successfully: call destroy, and return 0.
The only callsite is hci_abort_conn() via hci_cmd_sync_run_once(), and
this changes its return value. However, its return value is not used
except as the return value for hci_disconnect(), and nothing uses the
return value of hci_disconnect(). Hence there should be no behavior
change anywhere.
Fixes: c898f6d7b0 ("Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Before the introduction of the EHINV feature, which lets software mark
TLB entries invalid, certain older implementations of the MIPS ISA were
equipped with an analogous bit, as a vendor extension, which however is
hidden from software and only ever set at reset, and then any software
write clears it, making the intended TLB entry valid.
This feature makes it unsafe to read a TLB entry with TLBR, modify the
page mask, and write the entry back with TLBWI, because this operation
will implicitly clear the hidden bit and this may create a duplicate
entry, as with the presence of the hidden bit there is no guarantee all
the entries across the TLB are unique each.
Usually the firmware has already uniquified TLB entries before handing
control over, in which case we only need to guarantee at bootstrap no
clash will happen with the VPN2 values chosen in local_flush_tlb_all().
However with systems such as Mikrotik RB532 we get handed the TLB as at
reset, with the hidden bit set across the entries and possibly duplicate
entries present. This then causes a machine check exception when page
sizes are reset in r4k_tlb_uniquify() and prevents the system from
booting.
Rewrite the algorithm used in r4k_tlb_uniquify() then such as to avoid
the reuse of ASID/VPN values across the TLB. Get rid of global entries
first as they may be blocking the entire address space, e.g. 16 256MiB
pages will exhaust the whole address space of a 32-bit CPU and a single
big page can exhaust the 32-bit compatibility space on a 64-bit CPU.
Details of the algorithm chosen are given across the code itself.
Fixes: 9f048fa487 ("MIPS: mm: Prevent a TLB shutdown on initial uniquification")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Hardware that supports the EHINV feature, mandatory for R6 ISA and FTLB
implementation, lets software mark TLB entries invalid, which eliminates
the need to ensure no duplicate matching entries are ever created. This
feature is already used by local_flush_tlb_all(), via the UNIQUE_ENTRYHI
macro, making the preceding call to r4k_tlb_uniquify() superfluous.
The next change will also modify uniquification code such that it'll
become incompatible with the FTLB and MMID features, as well as MIPSr6
CPUs that do not implement 4KiB pages.
Therefore prevent r4k_tlb_uniquify() from being used on EHINV hardware,
as denoted by `cpu_has_tlbinv'.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With a 32-bit kernel running on 64-bit MIPS hardware the hardcoded value
of `cpu_vmbits' only records the size of compatibility useg and does not
reflect the size of native xuseg or the complete range of values allowed
in the VPN2 field of TLB entries.
An upcoming change will need the actual VPN2 value range permitted even
in 32-bit kernel configurations, so always include the `vmbits' member
in `struct cpuinfo_mips' and probe for SEGBITS when running on 64-bit
hardware and resorting to the currently hardcoded value of 31 on 32-bit
processors. No functional change for users of `cpu_vmbits'.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It was only GCC 10 that fixed a MIPS64r6 code generation issue with a
`__multi3' libcall inefficiently produced to perform 64-bit widening
multiplication while suitable machine instructions exist to do such a
calculation. The fix went in with GCC commit 48b2123f6336 ("re PR
target/82981 (unnecessary __multi3 call for mips64r6 linux kernel)").
Adjust our code accordingly, removing build failures such as:
mips64-linux-ld: lib/math/div64.o: in function `mul_u64_add_u64_div_u64':
div64.c:(.text+0x84): undefined reference to `__multi3'
with the GCC versions affected.
Fixes: ebabcf17bc ("MIPS: Implement __multi3 for GCC7 MIPS64r6 builds")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601140146.hMLODc6v-lkp@intel.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v4.15+
Reviewed-by: David Laight <david.laight.linux@gmail.com.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Bring back cache initialisation for Broadcom SiByte SB1 cores, which has
been removed causing the kernel to hang at bootstrap right after:
Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes, linear)
The cause of the problem is R4k cache handlers are also used by Broadcom
SiByte SB1 cores, however with a different cache error exception handler
and therefore not using CPU_R4K_CACHE_TLB:
obj-$(CONFIG_CPU_R4K_CACHE_TLB) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_SB1) += c-r4k.o cerr-sb1.o cex-sb1.o tlb-r4k.o
(from arch/mips/mm/Makefile).
Fixes: bbe4f634f4 ("mips: fix r3k_cache_init build regression")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Update CPU clock index to match the clock driver changes.
Fixes: d34db686a3 ("clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Some firmware does not set nr_uarts properly and passes empty items.
Iterate at most min(system->nr_uarts, MAX_UARTS) items to prevent
out-of-bounds access, and ignore UARTs with addr 0 silently.
Meanwhile, our DT only works with UPIO_MEM but theoretically firmware
may pass other IO types, so explicitly check against that.
Tested on Loongson-LS3A4000-7A1000-NUC-SE.
Fixes: 3989ed4184 ("MIPS: Loongson64: env: Fixup serial clock-frequency when using LEFI")
Cc: stable@vger.kernel.org
Reviewed-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Rong Zhang <rongrong@oss.cipunited.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Historically DSI PHY bindings landed to the display/msm subdir, however
they describe PHYs and as such they should be in the phy/ subdir.
Follow the example of other Qualcomm display-related PHYs (HDMI, eDP)
and move bindings for the Qualcomm DSI PHYs to the correct subdir.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/709008/
Link: https://lore.kernel.org/r/20260305-msm-dsi-phy-v1-1-0a99ac665995@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The driver references CWB array from SM8650, but should use the Eliza
specific, which has different register space sizes. This should not
have noticeable impact on function but is indeed confusing, since the
Eliza table is used for .cwb_count.
Fixes: 0eb707bbc7 ("drm/msm/dpu: Add support for Eliza SoC")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/715623/
Link: https://lore.kernel.org/r/20260331161156.211623-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Due to historical reasons we ended up with dummy values being specified
for MST-related interfaces some of them had INTF_NONE, others had
non-existing DP controller indices. Those workarounds are no longer
necessary. Fix types and indices for all DP-MST related INTF instances.
The only exception is INTF_3 on SC8180X, which has unique design. It can
be used either with INTF_0 / DP0 or with INTF_4 / DP1. This interface is
left with the dummy value until somebody implements necessary bits for
that platform.
Co-developed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/713988/
Link: https://lore.kernel.org/r/20260325-fix-dp-mst-interfaces-v1-1-186d1de3fa1b@oss.qualcomm.com
Support for using a single CTL for flushing both interfaces was not in
use since the MDP5 driver dropped support for dual DSI configurations in
the commit df3c789994 ("drm/msm/mdp5: drop split display support").
Having the MDP 3.x support migrated to the DPU driver the single CTL
flush is applicable to the platforms suspproted by the MDP5 driver. Drop
it alltogether.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/713916/
Link: https://lore.kernel.org/r/20260325-mdp5-drop-single-flush-v1-1-862a38b4d2ec@oss.qualcomm.com
On the Asus PRIME X670E-PRO WIFI, the driver reports a constant value of
zero for T_Sensor. On this board, the register for T_Sensor is at a
different address, as found by experimentation and confirmed by
comparison to an independent temperature reading.
* sensor disconnected: -62.0°C
* ambient temperature: +22.0°C
* held between fingers: +30.0°C
Introduce SENSOR_TEMP_T_SENSOR_ALT1 to support the PRIME X670E-PRO WIFI
without causing a regression for other 600-series boards
Fixes: e0444758dd ("hwmon: (asus-ec-sensors) add PRIME X670E-PRO WIFI")
Signed-off-by: Corey Hickey <bugfood-c@fatooh.org>
Link: https://lore.kernel.org/r/20260331215414.368785-1-bugfood-ml@fatooh.org
[groeck: Fixed typo, updated Fixes: reference]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If io_parse_restrictions() fails, it ends up clearing any restrictions
currently set. The intent is only to clear whatever it already applied,
but it ends up clearing everything, including whatever settings may have
been applied in a copy-on-write fashion already. Ensure that those are
retained.
Link: https://lore.kernel.org/io-uring/CAK8a0jzF-zaO5ZmdOrmfuxrhXuKg5m5+RDuO7tNvtj=kUYbW7Q@mail.gmail.com/
Reported-by: antonius <bluedragonsec2023@gmail.com>
Fixes: ed82f35b92 ("io_uring: allow registration of per-task restrictions")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 9618908026 addressed one case of ctx->rings being potentially
accessed while a resize is happening on the ring, but there are still
a few others that need handling. Add a helper for retrieving the
rings associated with an io_uring context, and add some sanity checking
to that to catch bad uses. ->rings_rcu is always valid, as long as it's
used within RCU read lock. Any use of ->rings_rcu or ->rings inside
either ->uring_lock or ->completion_lock is sane as well.
Do the minimum fix for the current kernel, but set it up such that this
basic infra can be extended for later kernels to make this harder to
mess up in the future.
Thanks to Junxi Qian for finding and debugging this issue.
Cc: stable@vger.kernel.org
Fixes: 79cfe9e59c ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Reviewed-by: Junxi Qian <qjx1298677004@gmail.com>
Tested-by: Junxi Qian <qjx1298677004@gmail.com>
Link: https://lore.kernel.org/io-uring/20260330172348.89416-1-qjx1298677004@gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement arm64 support for the 'unoptimized' static call variety, which
routes all calls through a trampoline that performs a tail call to the
chosen function, and wire it up for use when kCFI is enabled. This works
around an issue with kCFI and generic static calls, where the prototypes
of default handlers such as __static_call_nop() and __static_call_ret0()
don't match the expected prototype of the call site, resulting in kCFI
false positives [0].
Since static call targets may be located in modules loaded out of direct
branching range, this needs an ADRP/LDR pair to load the branch target
into R16 and a branch-to-register (BR) instruction to perform an
indirect call.
Unlike on x86, there is no pressing need on arm64 to avoid indirect
calls at all cost, but hiding it from the compiler as is done here does
have some benefits:
- the literal is located in .rodata, which gives us the same robustness
advantage that code patching does;
- no D-cache pollution from fetching hash values from .text sections.
From an execution speed PoV, this is unlikely to make any difference at
all.
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will McVicker <willmcvicker@google.com>
Reported-by: Carlos Llamas <cmllamas@google.com>
Closes: https://lore.kernel.org/all/20260311225822.1565895-1-cmllamas@google.com/ [0]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls
kobject_put(&dbs_data->attr_set.kobj).
The kobject release callback cpufreq_dbs_data_release() calls
gov->exit(dbs_data) and kfree(dbs_data), but the current error path
then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a
double free.
Keep the direct kfree(dbs_data) for the gov->init() failure path, but
after kobject_init_and_add() has been called, let kobject_put() handle
the cleanup through cpufreq_dbs_data_release().
Fixes: 4ebe36c94a ("cpufreq: Fix kobject memleak")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260401024535.1395801-1-lgs201920130244@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the naked intel_uncore_read*() with intel_de_read*()
in the MCHBAR code.
v2: Rebase due to intel_uncore_read64_2x32()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260331154259.24600-12-ville.syrjala@linux.intel.com
intel_de_read64_2x32_volatile() is a complex beast because
it needs to deal with volatile register values. For simpler
cases we can simply do a pair normal intel_de_read()s.
My main reason for hating overuse of intel_de_read64_2x32_volatile()
is that it makes register tracepoints confusing. It always
does three accesses in the somewhat weird udw,ldw,udw order,
confusing the reader of the trace. Much more clear if we just
observe the two reads in the natural little endian order.
We also have no non-volatile use case where the LDW and UDW
are stored in non-consecutive registers, so we can just pass
along a single register offset.
v2: Put the function arguments on one line (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260331154259.24600-10-ville.syrjala@linux.intel.com
