The QIXIS FPGA found on Layerscape boards such as LX2160AQDS, LS1028AQDS
etc deals with power-on-reset timing, muxing etc. Use the simple-mfd-i2c
as its core driver by adding its compatible string (already found in
some dt files). By using the simple-mfd-i2c driver, any child device
will have access to the i2c regmap created by it.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250707153120.1371719-1-ioana.ciornei@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Commit 5c83b07df9 ("tpm: Add a driver for Loongson TPM device") adds a
driver at drivers/char/tpm/tpm_loongson.c, and commit 74fddd5fba
("MAINTAINERS: Add entry for Loongson Security Engine drivers") adds a new
section LOONGSON SECURITY ENGINE DRIVERS intending to refer to that driver.
It however adds the entry drivers/char/tpm_loongson.c; note that it misses
the tpm subdirectory.
Adjust the entry to refer to the intended file.
Fixes: 74fddd5fba ("MAINTAINERS: Add entry for Loongson Security Engine drivers")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Commit 5c83b07df9 ("tpm: Add a driver for Loongson TPM device") has a
semantic conflict with commit 07d8004d6f ("tpm: add bufsiz parameter
in the .send callback"), as the former change was developed against a
tree without the latter change. This results in a build error:
drivers/char/tpm/tpm_loongson.c:48:17: error: initialization of 'int (*)(struct tpm_chip *, u8 *, size_t, size_t)' {aka 'int (*)(struct tpm_chip *, unsigned char *, long unsigned int, long unsigned int)'} from incompatible pointer type 'int (*)(struct tpm_chip *, u8 *, size_t)' {aka 'int (*)(struct tpm_chip *, unsigned char *, long unsigned int)'} [-Wincompatible-pointer-types]
48 | .send = tpm_loongson_send,
| ^~~~~~~~~~~~~~~~~
drivers/char/tpm/tpm_loongson.c:48:17: note: (near initialization for 'tpm_loongson_ops.send')
drivers/char/tpm/tpm_loongson.c:31:12: note: 'tpm_loongson_send' declared here
31 | static int tpm_loongson_send(struct tpm_chip *chip, u8 *buf, size_t count)
| ^~~~~~~~~~~~~~~~~
Add the expected bufsiz parameter to tpm_loongson_send() to resolve the
error.
Fixes: 5c83b07df9 ("tpm: Add a driver for Loongson TPM device")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Add driver for Maxim Integrated MAX7360 keypad controller, providing
support for up to 64 keys, with a matrix of 8 columns and 8 rows.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-8-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add driver for Maxim Integrated MAX7360 GPIO/GPO controller.
Two sets of GPIOs are provided by the device:
- Up to 8 GPIOs, shared with the PWM and rotary encoder functionalities.
These GPIOs also provide interrupts on input changes.
- Up to 6 GPOs, on unused keypad columns pins.
Co-developed-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-7-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Allows to populate the gpio_regmap_config structure with
init_valid_mask() callback to set on the final gpio_chip structure.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-6-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
GPIO controller often have support for IRQ: allow to easily allocate
both gpio-regmap and regmap-irq in one operation.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-5-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add driver for Maxim Integrated MAX7360 pinctrl on the PORT pins. Pins
can be used either for GPIO, PWM or rotary encoder functionalities.
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-3-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add core driver to support MAX7360 i2c chip, multi function device
with keypad, GPIO, PWM, GPO and rotary encoder submodules.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Co-developed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-2-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add device tree bindings for Maxim Integrated MAX7360 device with
support for keypad, rotary, gpios and pwm functionalities.
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-1-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver supports RTC functionality for NCT6694 MFD device
based on USB interface.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-8-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver supports Hardware monitor functionality for NCT6694 MFD
device based on USB interface.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-7-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver supports Watchdog timer functionality for NCT6694 MFD
device based on USB interface.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-6-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver supports Socket CANFD functionality for NCT6694 MFD
device based on USB interface.
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-5-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver supports I2C adapter functionality for NCT6694 MFD
device based on USB interface.
Each I2C controller uses the default baudrate of 100kHz, which
can be overridden via module parameters.
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-4-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver supports GPIO and IRQ functionality for NCT6694 MFD
device based on USB interface.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-3-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Nuvoton NCT6694 provides an USB interface to the host to
access its features.
Sub-devices can use the USB functions nct6694_read_msg() and
nct6694_write_msg() to issue a command. They can also request
interrupt that will be called when the USB device receives its
interrupt pipe.
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-2-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
After a recent change that started using FIELD_GET() in tps6594-core.c,
there is an error when bitfield.h is not implicitly included, such as
when building allmodconfig for ARCH=hexagon:
drivers/mfd/tps6594-core.c:767:7: error: call to undeclared function 'FIELD_GET'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
767 | if (FIELD_GET(TPS65224_MASK_EN_PB_VSENSE_CONFIG, pwr_on) == TPS65224_EN_SEL_PB ||
| ^
Explicitly include bitfield.h to resolve the errors.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d766ca01c2 ("mfd: tps6594: Add power button functionality")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202509032356.LGa5hygM-lkp@intel.com/
Link: https://lore.kernel.org/r/20250904-mfd-tps6594-core-fix-bitfield-h-v1-1-5d0f00cfe58f@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for the boost regulator found in the Texas Instruments
BQ25703. The boost regulator is capable of outputting between 4.48
and 20.8 volts and between 0 and 6.35 amps.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250904160530.66178-5-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for the charger function of the BQ257XX. The device is
capable of charging batteries with a layout of 1 to 4 cells in
series.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250904160530.66178-4-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Texas Instruments BQ25703A is an integrated charger manager and
boost converter.
The MFD driver initializes the device for the regulator driver
and power supply driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250904160530.66178-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Document the Texas instruments BQ25703A series of charger managers/
buck/boost regulators.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250904160530.66178-2-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
mc13xxx_irq_ack() got deprecated and became dead code with commit
10f9edaeaa ("mfd: mc13xxx: Use regmap irq framework for interrupts").
It should be safe to remove it now.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://lore.kernel.org/r/20250811064358.1659-1-akurz@blala.de
Signed-off-by: Lee Jones <lee@kernel.org>
Convert the driver to using the new generic GPIO chip interfaces from
linux/gpio/generic.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250811-gpio-mmio-mfd-conv-v1-2-68c5c958cf80@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Commit 974cc7b934 ("mfd: vexpress: Define the device as MFD cells")
removed the return value check from the call to gpiochip_add_data() (or
rather gpiochip_add() back then and later converted to devres) with no
explanation. This function however can still fail, so check the return
value and bail-out if it does.
Cc: stable@vger.kernel.org
Fixes: 974cc7b934 ("mfd: vexpress: Define the device as MFD cells")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250811-gpio-mmio-mfd-conv-v1-1-68c5c958cf80@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add a system level power-off handler if the "system-power-controller"
flag is set for this device in the device tree.
A power-off request is triggered by writing the TRIGGER_I2C_0 bit (which
is actually just a convention and really depends on the freely
programmable FSM).
Co-developed-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250826134631.1499936-4-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The PMIC has a multi-function pin PB/EN/VSENSE. If it is configured as
push-button (PB), add the corresponding device for it.
Co-developed-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250826134631.1499936-3-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
TPS6594 defines two interrupts for the power button one for push and
one for release.
This driver is very simple in that it maps the push interrupt to a key
input and the release interrupt to a key release.
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250826134631.1499936-2-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
This patch adds an entry for Loongson Security Engine drivers in the
list of maintainers.
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250705072045.1067-5-zhaoqunqin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Loongson Security Engine supports random number generation, hash,
symmetric encryption and asymmetric encryption. Based on these
encryption functions, TPM2 have been implemented in the Loongson
Security Engine firmware. This driver is responsible for copying data
into the memory visible to the firmware and receiving data from the
firmware.
Co-developed-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250705072045.1067-4-zhaoqunqin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Loongson Security Engine chip supports RNG, SM2, SM3 and SM4 accelerator
engines. This is the base driver for other specific engine drivers.
Co-developed-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250705072045.1067-2-zhaoqunqin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
-----BEGIN PGP SIGNATURE-----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=1iYa
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
"tools/power turbostat: version 2025.09.09
- Probe and display L3 Cache topology
- Add ability to average an added counter (useful for pre-integrated
"counters", such as Watts)
- Break the limit of 64 built-in counters
- Assorted bug fixes and minor feature tweaks"
* tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.09.09
tools/power turbostat: Handle non-root legacy-uncore sysfs permissions
tools/power turbostat: standardize PER_THREAD_PARAMS
tools/power turbostat: Fix DMR support
tools/power turbostat: add format "average" for external attributes
tools/power turbostat: delete GET_PKG()
tools/power turbostat: probe and display L3 cache topology
tools/power turbostat: Support more than 64 built-in-counters
tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columns
tools/power turbostat: Fix bogus SysWatt for forked program
tools/power turbostat: Handle cap_get_proc() ENOSYS
tools/power turbostat: Fix build with musl
tools/power turbostat: verify arguments to params --show and --hide
tools/power turbostat: regression fix: --show C1E%
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
-----BEGIN PGP SIGNATURE-----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=VUGL
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
-----BEGIN PGP SIGNATURE-----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=pdid
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix an interrupt vector setup race which leads to a non-functioning
device
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
* tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Plug vector setup race
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
-----BEGIN PGP SIGNATURE-----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=Xpyt
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Prevent a futex hash leak due to different mm lifetimes
* tag 'locking_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Move futex cleanup to __mmdrop()
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
Signed-off-by: Len Brown <len.brown@intel.com>
