If queue entry or DMA descriptor list allocation fails in
airoha_qdma_init_rx_queue routine, airoha_qdma_cleanup() will trigger a
NULL pointer dereference running netif_napi_del() for RX queue NAPIs
since netif_napi_add() has never been executed to this particular RX NAPI.
The issue is due to the early ndesc initialization in
airoha_qdma_init_rx_queue() since airoha_qdma_cleanup() relies on ndesc
value to check if the queue is properly initialized. Fix the issue moving
ndesc initialization at end of airoha_qdma_init_tx routine.
Move page_pool allocation after descriptor list allocation in order to
avoid memory leaks if desc allocation fails.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260420-airoha_qdma_init_rx_queue-fix-v2-1-d99347e5c18d@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vlan_dev_set_egress_priority() currently keeps cleared egress
priority mappings in the hash as tombstones. Repeated set/clear cycles
with distinct skb priorities therefore accumulate mapping nodes until
device teardown and leak memory.
Delete mappings when vlan_prio is cleared instead of keeping tombstones.
Now that the egress mapping lists are RCU protected, the node can be
unlinked safely and freed after a grace period.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Longxuan Yu <ylong030@ucr.edu>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/ecfa6f6ce2467a42647ff4c5221238ae85b79a59.1776647968.git.yuantan098@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The TX fast path and reporting paths walk egress QoS mappings without
RTNL. Convert the mapping lists to RCU-protected pointers, use RCU
reader annotations in readers, and defer freeing mapping nodes with an
embedded rcu_head.
This prepares the egress QoS mapping code for safe removal of mapping
nodes in a follow-up change while preserving the current behavior.
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Longxuan Yu <ylong030@ucr.edu>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/9136768189f8c6d3f824f476c62d2fa1111688e8.1776647968.git.yuantan098@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=6RJG
-----END PGP SIGNATURE-----
Merge tag 'nf-26-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following batch contains Netfilter/IPVS fixes for net:
1) nft_osf actually only supports IPv4, restrict it.
2) Address possible division by zero in nfnetlink_osf, from Xiang Mei.
3) Remove unsafe use of sprintf to fix possible buffer overflow
in the SIP NAT helper, from Florian Westphal.
4) Restrict xt_mac, xt_owner and xt_physdev to inet families only;
xt_realm is only for ipv4, otherwise null-pointer-deref is possible.
5) Use kfree_rcu() in nat core to release hooks, this can be an issue
once nfnetlink_hook gets support to dump NAT hook information, not
currently a real issue but better fix it now. From Florian Westphal.
6) Fix MTU checks in IPVS, from Yingnan Zhang.
7) Fix possible out-of-bounds when matching TCP options in
nfnetlink_osf, from Fernando Fernandez Mancera.
8) Fix potential nul-ptr-deref in ttl check in nfnetlink_osf,
remove useless loop to fix this, also from Fernando.
This is a smaller batch, there are more patches pending in the queue
to arm another pull request as soon as this is considered good enough.
AI might complain again about one more issue regarding osf and
big-endian arches in osf but this batch is targetting crash fixes for
osf at this stage.
netfilter pull request 26-04-20
* tag 'nf-26-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check
netfilter: nfnetlink_osf: fix out-of-bounds read on option matching
ipvs: fix MTU check for GSO packets in tunnel mode
netfilter: nat: use kfree_rcu to release ops
netfilter: xtables: restrict several matches to inet family
netfilter: conntrack: remove sprintf usage
netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO
netfilter: nft_osf: restrict it to ipv4
====================
Link: https://patch.msgid.link/20260420220215.111510-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We'd like to address the problem rather in the error code path of
platform_device_register() itself instead of leaving it all callers,
since less than 1% of all callers of over 100
platform_device_register() do call platform_device_put() properly as
of now.
For making the work easier, revert the previous change commit
4ff036f952 ("ALSA: pcmtest: fix reference leak on failed device
registration") again.
Link: https://lore.kernel.org/20260415193138.3861297-1-lgs201920130244@gmail.com
Link: https://patch.msgid.link/20260423075211.3977366-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK macro was shifting
the 4-bit mask (0xF) by only (_extint % 2) bits instead of
(_extint % 2) * 4. This caused the mask to overlap with the adjacent
nibble when configuring odd-numbered external interfaces, selecting
the wrong bits entirely.
Align the shift calculation with the existing ...MODE_OFFSET macro.
Fixes: 4af2950c50 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Abdulkader Alrezej <alrazj.abdulkader@gmail.com>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/400a6387-a444-4576-af6d-26be5410bce3@yahoo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Chaitanya, John and Mikhail reported commit 25500ba7e7 ("locking/mutex:
Remove the list_head from struct mutex") wrecked ww_mutex.
Specifically there were 2 issues:
- __ww_waiter_prev() had the termination condition wrong; it would terminate
when the previous entry was the first, which results in a truncated
iteration: W3, W2, (no W1).
- __mutex_add_waiter(@pos != NULL), as used by __ww_waiter_add() /
__ww_mutex_add_waiter(); this inserts @waiter before @pos (which is what
list_add_tail() does). But this should then also update lock->first_waiter.
Much thanks to Prateek for spotting the __mutex_add_waiter() issue!
Fixes: 25500ba7e7 ("locking/mutex: Remove the list_head from struct mutex")
Reported-by: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/r/af005996-05e9-4336-8450-d14ca652ba5d%40intel.com
Reported-by: John Stultz <jstultz@google.com>
Closes: https://lore.kernel.org/r/CANDhNCq%3Doizzud3hH3oqGzTrcjB8OwGeineJ3mwZuGdDWG8fRQ%40mail.gmail.com
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/r/CABXGCsO5fKq2nD9nO8yO1z50ZzgCPWqueNXHANjntaswoOh2Dg@mail.gmail.com
Debugged-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://patch.msgid.link/20260422092335.GH3102924%40noisy.programming.kicks-ass.net
The kernel-doc comments for vmapping_counter and vmap_ptr in struct
dma_buf reference "@lock" as the protecting lock, but struct dma_buf
no longer has a "lock" member. The mutex was removed in favor of using
the dma_resv lock exclusively. The implementation correctly uses
dma_resv_assert_held(dmabuf->resv) in dma_buf_vmap() and
dma_buf_vunmap(), so update the documentation to reference @resv
instead.
Signed-off-by: gaoxiang17 <gaoxiang17@xiaomi.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260415054101.535520-1-gxxa03070307@gmail.com
A fairly small collection of fixes, device IDs and quirks that came in
during the merge window, the most remarkable of which is one for SDCA
boolean firmware flags which is remarkable mainly because it is
partially in regmap.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmnpN3sACgkQJNaLcl1U
h9DW3Qf+L98HjSd8wqhDWPdb2Rj1NLsZzccPA9/lt6W5aebSrlvbpwa1GlnD0eIh
C+ZEDVzX6aUiZ0xcUqG6mBUrLScDcb408TW55n+iPr3yvQO4nf9fSd1mjaok07Cr
klR9lg+lg7GSMNyxVONpcLFpGWpIvZ3X+s/qUOeRg+gdhlrzubjTI0zS4GFbJDvL
8ekkHYm5rBa1YOU45Xoiisskc0MePNZF5V0/m8uoUuRVsE2vZyLzpewNXFAi5EHw
jc9b1u5Bk4GLk5alfp0IaqNhhgobYH3p+tnMwT0kdfjxT94vp4znyLt9uD0OGZCL
ATxOqguGC4qQixTgPucjKbfr9wRVcQ==
=qUKh
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v7.1-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.1
A fairly small collection of fixes, device IDs and quirks that came in
during the merge window, the most remarkable of which is one for SDCA
boolean firmware flags which is remarkable mainly because it is
partially in regmap.
Similar to airoha_qdma_cleanup_rx_queue(), reset DMA TX descriptors in
airoha_qdma_cleanup_tx_queue routine. Moreover, reset TX_DMA_IDX to
TX_CPU_IDX to notify the NIC the QDMA TX ring is empty.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260417-airoha_qdma_cleanup_tx_queue-fix-net-v4-2-e04bcc2c9642@kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If queue entry list allocation fails in airoha_qdma_init_tx_queue routine,
airoha_qdma_cleanup_tx_queue() will trigger a NULL pointer dereference
accessing the queue entry array. The issue is due to the early ndesc
initialization in airoha_qdma_init_tx_queue(). Fix the issue moving ndesc
initialization at end of airoha_qdma_init_tx routine.
Fixes: 3f47e67dff ("net: airoha: Add the capability to consume out-of-order DMA tx descriptors")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260417-airoha_qdma_cleanup_tx_queue-fix-net-v4-1-e04bcc2c9642@kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
authencesn requires either a zero authsize or an authsize of at least
4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of
high-order sequence number data at the end of the authenticated data.
While crypto_authenc_esn_setauthsize() already rejects explicit
non-zero authsizes in the range 1..3, crypto_authenc_esn_create()
still copied auth->digestsize into inst->alg.maxauthsize without
validating it. The AEAD core then initialized the tfm's default
authsize from that value.
As a result, selecting an ahash with digest size 1..3, such as
cbcmac(cipher_null), exposed authencesn instances whose default
authsize was invalid even though setauthsize() would have rejected the
same value. AF_ALG could then trigger the ESN tail handling with a
too-short tag and hit an out-of-bounds access.
Reject authencesn instances whose ahash digest size is in the invalid
non-zero range 1..3 so that no tfm can inherit an unsupported default
authsize.
Fixes: f15f05b0a5 ("crypto: ccm - switch to separate cbcmac driver")
Cc: stable@kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Yuhang Zheng <z1652074432@gmail.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Yucheng Lu <kanolyc@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to do the following load-acquire and store-release tests on
LoongArch:
sudo ./test_progs -t verifier_load_acquire
sudo ./test_progs -t verifier_store_release
sudo ./test_progs -t verifier_precision/bpf_load_acquire
sudo ./test_progs -t verifier_precision/bpf_store_release
sudo ./test_progs -t compute_live_registers/atomic_load_acq_store_rel
It needs to enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Implement BPF_TRACE_FSESSION support in LoongArch BPF JIT. The logic
here is almost identical to what has been done in RISC-V JIT.
The key changes are:
- Allocate stack space for function meta and session cookies
- Introduce invoke_bpf() as a wrapper around invoke_bpf_prog() that
populates session cookies before each invocation
- Implement bpf_jit_supports_fsession() callback
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Reviewed-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Introduce a helper to store 64-bit immediate on the trampoline stack.
The helper will be used in the next patch. Also refactor the existing
code to use this helper.
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Reviewed-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
sfb_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_sfb_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260421141655.3953721-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
red_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_red_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421142309.3964322-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fq_codel_dump_stats() acquires the qdisc spinlock a bit too late.
Move this acquisition before we fill st.qdisc_stats with live data.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421142509.3967231-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pie_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_pie_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421142944.4009941-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hhf_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421143349.4052215-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller says:
====================
Intel Wired LAN Driver Updates 2026-04-20 (ice)
Since this is a set of related fixes for just the ice driver, Jake provides
the following description for the series:
We recently ran into a nasty corner case issue with a customer operating
E825C cards seeing some strange behavior with missing Tx timestamps. During
the course of debugging. This series contains a few fixes found during this
debugging process.
The primary issue discovered in the investigation is a misconfiguration of
the E825C PHY timestamp interrupt register, PHY_REG_TS_INT_CONFIG. This
register is responsible for programming the Tx timestamp behavior of a PHY
port. The driver programs two values here: a threshold for when to
interrupt and whether the interrupt is enabled.
The threshold value is used by hardware to determine when to trigger a Tx
timestamp interrupt. The interrupt cause for the port is raised when the
number of outstanding timestamps in the PHY port timestamp memory meets the
threshold. The interrupt cause is not cleared until the number of
outstanding timestamps drops *below* the threshold.
It is considered a misconfiguration if the threshold is programmed to 0. If
the interrupt is enabled while the threshold is zero, hardware will raise
the interrupt cause at the next time it checks. Once raised, the interrupt
cause for the port will never lower, since you cannot have fewer than zero
outstanding timestamps.
Worse, the timestamp status for the port will remain high even if the
PHY_REG_TS_INT_CONFIG is reprogrammed with a new threshold. The PHY is a
separate hardware block from the MAC, and thus the interrupt status for the
port will remain high even if you reset the device MAC with a PF reset,
CORE reset, or GLOBAL reset.
PHY ports are connected together into quads. Each quad muxes the PHY
interrupt status for the 4 ports on the quad together before connecting
that to the MACs miscellaneous interrupt vector. As a result, if a single
PHY port in the quad is stuck, no timestamp interrupts will be generated
for any timestamp on any port on that quad.
The ice driver never directly writes a value of 0 for the threshold.
Indeed, the desired behavior is to set the threshold to 1, so that
interrupts are generated as soon as a single timestamp is captured.
Unfortunately, it turns out that for the E825C PHY, programming the
threshold and enable bit in the same write may cause a race in the PHY
timestamp block. The PHY may "see" the interrupt as enabled first before it
sees the threshold value. If the previous threshold value is zero (such as
when the register is initialized to zero at a cold power on), the hardware
may race with programming the threshold and set the PHY interrupt status to
high as described above.
The first patch in this series corrects that programming order, ensuring
that the threshold is always written first in a separate transaction from
enabling the interrupt bit. Additionally, an explicit check against writing
a 0 is added to make it clear to future readers that writing 0 to the
threshold while enabling the interrupt is not safe.
The PHY timestamp block does not reset with the MAC, and seems to only
reset during cold power on. This makes recovery from the faulty
configuration difficult. To address this, perform an explicit reset of the
PHY PTP block during initialization. This is achieved by writing the
PHY_REG_GLOBAL register. This performs a PHY soft reset, which completely
resets the timestamp block. This includes clearing the timestamp memory,
the PHY timestamp interrupt status, and the PHY PTP counter. A soft reset
of all ports on the device is done as part of ice_ptp_init_phc() during
early initialization of the PTP functionality by the PTP clock owner, prior
to programming each PHY. The ice_ptp_init_phc() function is called at
driver init and during reinitialization after all forms of device reset.
This ensures that the driver begins operation at a clean slate, rather than
carrying over the stale and potentially buggy configuration of a previous
driver.
While attempting to root cause the issue with the PHY timestamp interrupt,
we also discovered that the driver incorrectly assumes that it is operating
on E822 hardware when reading the PHY timestamp memory status registers in
a few places. This includes the check at the end of the interrupt handler,
as well as the check done inside the PTP auxiliary function. This prevented
the driver from detecting waiting timestamps on ports other than the first
two.
Finally, the ice_ptp_read_tx_hwstamp_status_eth56g() function was
discovered to only read the timestamp interrupt status value from the first
quad due to mistaking the port index for a PHY quad index. This resulted in
reporting the timestamp status for the second quad as identical to the
first quad instead of properly reporting its value. This is a minor fix
since the function currently is only used for diagnostic purposes and does
not impact driver decision logic.
====================
Link: https://patch.msgid.link/20260420-jk-iwl-net-2026-04-20-ptp-e825c-phy-interrupt-fixes-v1-0-bc2240f42251@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_ptp_read_tx_hwtstamp_status_eth56g function calls
ice_read_phy_eth56g with a PHY index. However the function actually expects
a port index. This causes the function to read the wrong PHY_PTP_INT_STATUS
registers, and effectively makes the status wrong for the second set of
ports from 4 to 7.
The ice_read_phy_eth56g function uses the provided port index to determine
which PHY device to read. We could refactor the entire chain to take a PHY
index, but this would impact many code sites. Instead, multiply the PHY
index by the number of ports, so that we read from the first port of each
PHY.
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260420-jk-iwl-net-2026-04-20-ptp-e825c-phy-interrupt-fixes-v1-4-bc2240f42251@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The E800 hardware (apart from E810) has a ready bitmap for the PHY
indicating which timestamp slots currently have an outstanding timestamp
waiting to be read by software.
This bitmap is checked in multiple places using the
ice_get_phy_tx_tstamp_ready():
* ice_ptp_process_tx_tstamp() calls it to determine which timestamps to
attempt reading from the PHY
* ice_ptp_tx_tstamps_pending() calls it in a loop at the end of the
miscellaneous IRQ to check if new timestamps came in while the interrupt
handler was executing.
* ice_ptp_maybe_trigger_tx_interrupt() calls it in the auxiliary work task
to trigger a software interrupt in the event that the hardware logic
gets stuck.
For E82X devices, multiple PHYs share the same block, and the parameter
passed to the ready bitmap is a block number associated with the given
port. For E825-C devices, the PHYs have their own independent blocks and do
not share, so the parameter passed needs to be the port number. For E810
devices, the ice_get_phy_tx_tstamp_ready() always returns all 1s regardless
of what port, since this hardware does not have a ready bitmap. Finally,
for E830 devices, each PF has its own ready bitmap accessible via register,
and the block parameter is unused.
The first call correctly uses the Tx timestamp tracker block parameter to
check the appropriate timestamp block. This works because the tracker is
setup correctly for each timestamp device type.
The second two callers behave incorrectly for all device types other than
the older E822 devices. They both iterate in a loop using
ICE_GET_QUAD_NUM() which is a macro only used by E822 devices. This logic
is incorrect for devices other than the E822 devices.
For E810 the calls would always return true, causing E810 devices to always
attempt to trigger a software interrupt even when they have no reason to.
For E830, this results in duplicate work as the ready bitmap is checked
once per number of quads. Finally, for E825-C, this results in the pending
checks failing to detect timestamps on ports other than the first two.
Fix this by introducing a new hardware API function to ice_ptp_hw.c,
ice_check_phy_tx_tstamp_ready(). This function will check if any timestamps
are available and returns a positive value if any timestamps are pending.
For E810, the function always returns false, so that the re-trigger checks
never happen. For E830, check the ready bitmap just once. For E82x
hardware, check each quad. Finally, for E825-C, check every port.
The interface function returns an integer to enable reporting of error code
if the driver is unable read the ready bitmap. This enables callers to
handle this case properly. The previous implementation assumed that
timestamps are available if they failed to read the bitmap. This is
problematic as it could lead to continuous software IRQ triggering if the
PHY timestamp registers somehow become inaccessible.
This change is especially important for E825-C devices, as the missing
checks could leave a window open where a new timestamp could arrive while
the existing timestamps aren't completed. As a result, the hardware
threshold logic would not trigger a new interrupt. Without the check, the
timestamp is left unhandled, and new timestamps will not cause an interrupt
again until the timestamp is handled. Since both the interrupt check and
the backup check in the auxiliary task do not function properly, the device
may have Tx timestamps permanently stuck failing on a given port.
The faulty checks originate from commit d938a8cca8 ("ice: Auxbus devices
& driver for E822 TS") and commit 712e876371 ("ice: periodically kick Tx
timestamp interrupt"), however at the time of the original coding, both
functions only operated on E822 hardware. This is no longer the case, and
hasn't been since the introduction of the ETH56G PHY model in commit
7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260420-jk-iwl-net-2026-04-20-ptp-e825c-phy-interrupt-fixes-v1-3-bc2240f42251@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some cases the PHY timestamp block of the E825C can become stuck. This
is known to occur if the software writes 0 to the Tx timestamp threshold,
and with older versions of the ice driver the threshold configuration is
buggy and can race in such that hardware briefly operates with a zero
threshold enabled. There are no other known ways to trigger this behavior,
but once it occurs, the hardware is not recovered by normal reset, a driver
reload, or even a warm power cycle of the system. A cold power cycle is
sufficient to recover hardware, but this is extremely invasive and can
result in significant downtime on customer deployments.
The PHY for each port has a timestamping block which has its own reset
functionality accessible by programming the PHY_REG_GLOBAL register.
Writing to the PHY_REG_GLOBAL_SOFT_RESET_BIT triggers the hardware to
perform a complete reset of the timestamping block of the PHY. This
includes clearing the timestamp status for the port, clearing all
outstanding timestamps in the memory bank, and resetting the PHY timer.
The new ice_ptp_phy_soft_reset_eth56g() function toggles the
PHY_REG_GLOBAL soft reset bit with the required delays, ensuring the
PHY is properly reinitialized without requiring a full device reset.
The sequence clears the reset bit, asserts it, then clears it again,
with short waits between transitions to allow hardware stabilization.
Call this function in the new ice_ptp_init_phc_e825c(), implementing the
E825C device specific variant of the ice_ptp_init_phc(). Note that if
ice_ptp_init_phc() fails, PTP functionality may be disabled, but the driver
will still load to allow basic functionality to continue.
This causes the clock owning PF driver to perform a PHY soft reset for
every port during initialization. This ensures the driver begins life in a
known functional state regardless of how it was previously programmed.
This ensures that we properly reconfigure the hardware after a device reset
or when loading the driver, even if it was previously misconfigured with an
out-of-date or modified driver.
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Signed-off-by: Timothy Miskell <timothy.miskell@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260420-jk-iwl-net-2026-04-20-ptp-e825c-phy-interrupt-fixes-v1-2-bc2240f42251@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The E825C ice_phy_cfg_intr_eth56g() function is responsible for programming
the PHY interrupt for a given port. This function writes to the
PHY_REG_TS_INT_CONFIG register of the port. The register is responsible for
configuring whether the port interrupt logic is enabled, as well as
programming the threshold of waiting timestamps that will trigger an
interrupt from this port.
This threshold value must not be programmed to zero while the interrupt is
enabled. Doing so puts the port in a misconfigured state where the PHY
timestamp interrupt for the quad of connected ports will become stuck.
This occurs, because a threshold of zero results in the timestamp interrupt
status for the port becoming stuck high. The four ports in the connected
quad have their timestamp status indicators muxed together. A new interrupt
cannot be generated until the timestamp status indicators return low for
all four ports.
Normally, the timestamp status for a port will clear once there are fewer
timestamps in that ports timestamp memory bank than the threshold. A
threshold of zero makes this impossible, so the timestamp status for the
port does not clear.
The ice driver never intentionally programs the threshold to zero, indeed
the driver always programs it to a value of 1, intending to get an
interrupt immediately as soon as even a single packet is waiting for a
timestamp.
However, there is a subtle flaw in the programming logic in the
ice_phy_cfg_intr_eth56g() function. Due to the way that the hardware
handles enabling the PHY interrupt. If the threshold value is modified at
the same time as the interrupt is enabled, the HW PHY state machine might
enable the interrupt before the new threshold value is actually updated.
This leaves a potential race condition caused by the hardware logic where
a PHY timestamp interrupt might be triggered before the non-zero threshold
is written, resulting in the PHY timestamp logic becoming stuck.
Once the PHY timestamp status is stuck high, it will remain stuck even
after attempting to reprogram the PHY block by changing its threshold or
disabling the interrupt. Even a typical PF or CORE reset will not reset the
particular block of the PHY that becomes stuck. Even a warm power cycle is
not guaranteed to cause the PHY block to reset, and a cold power cycle is
required.
Prevent this by always writing the PHY_REG_TS_INT_CONFIG in two stages.
First write the threshold value with the interrupt disabled, and only write
the enable bit after the threshold has been programmed. When disabling the
interrupt, leave the threshold unchanged. Additionally, re-read the
register after writing it to guarantee that the write to the PHY has been
flushed upon exit of the function.
While we're modifying this function implementation, explicitly reject
programming a threshold of 0 when enabling the interrupt. No caller does
this today, but the consequences of doing so are significant. An explicit
rejection in the code makes this clear.
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260420-jk-iwl-net-2026-04-20-ptp-e825c-phy-interrupt-fixes-v1-1-bc2240f42251@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_for_each_conn_info() and rds_walk_conn_path_info() both hand a
caller-allocated on-stack u64 buffer to a per-connection visitor and
then copy the full item_len bytes back to user space via
rds_info_copy() regardless of how much of the buffer the visitor
actually wrote.
rds_ib_conn_info_visitor() and rds6_ib_conn_info_visitor() only
write a subset of their output struct when the underlying
rds_connection is not in state RDS_CONN_UP (src/dst addr, tos, sl
and the two GIDs via explicit memsets). Several u32 fields
(max_send_wr, max_recv_wr, max_send_sge, rdma_mr_max, rdma_mr_size,
cache_allocs) and the 2-byte alignment hole between sl and
cache_allocs remain as whatever stack contents preceded the visitor
call and are then memcpy_to_user()'d out to user space.
struct rds_info_rdma_connection and struct rds6_info_rdma_connection
are the only rds_info_* structs in include/uapi/linux/rds.h that are
not marked __attribute__((packed)), so they have a real alignment
hole. The other info visitors (rds_conn_info_visitor,
rds6_conn_info_visitor, rds_tcp_tc_info, ...) write all fields of
their packed output struct today and are not known to be vulnerable,
but a future visitor that adds a conditional write-path would have
the same bug.
Reproduction on a kernel built without CONFIG_INIT_STACK_ALL_ZERO=y:
a local unprivileged user opens AF_RDS, sets SO_RDS_TRANSPORT=IB,
binds to a local address on an RDMA-capable netdev (rxe soft-RoCE on
any netdev is sufficient), sendto()'s any peer on the same subnet
(fails cleanly but installs an rds_connection in the global hash in
RDS_CONN_CONNECTING), then calls getsockopt(SOL_RDS,
RDS_INFO_IB_CONNECTIONS). The returned 68-byte item contains 26
bytes of stack garbage including kernel text/data pointers:
0..7 0a 63 00 01 0a 63 00 02 src=10.99.0.1 dst=10.99.0.2
8..39 00 ... gids (memset-zeroed)
40..47 e0 92 a3 81 ff ff ff ff kernel pointer (max_send_wr)
48..55 7f 37 b5 81 ff ff ff ff kernel pointer (rdma_mr_max)
56..59 01 00 08 00 rdma_mr_size (garbage)
60..61 00 00 tos, sl
62..63 00 00 alignment padding
64..67 18 00 00 00 cache_allocs (garbage)
Fix by zeroing the per-item buffer in both rds_for_each_conn_info()
and rds_walk_conn_path_info() before invoking the visitor. This
covers the IPv4/IPv6 IB visitors and hardens all current and future
visitors against the same class of bug.
No functional change for visitors that fully populate their output.
Changes in v2:
- retarget at the net tree (subject prefix "[PATCH net v2]",
net/rds: prefix in the title)
- pick up Reviewed-by tags from Sharath Srinivasan and
Allison Henderson
Fixes: ec16227e14 ("RDS/IB: Infiniband transport")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Assisted-by: Claude:claude-opus-4-7
Link: https://patch.msgid.link/20260418141047.3398203-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When SEG6_IPTUN_MODE_L2ENCAP_RED (L2ENCAP_RED) was introduced, the
condition in seg6_build_state() that excludes L2 encap modes from
setting LWTUNNEL_STATE_OUTPUT_REDIRECT was not updated to account for
the new mode.
As a consequence, L2ENCAP_RED routes incorrectly trigger seg6_output()
on the output path, where the packet is silently dropped because
skb_mac_header_was_set() fails on L3 packets.
Extend the check to also exclude L2ENCAP_RED, consistent with L2ENCAP.
Fixes: 13f0296be8 ("seg6: add support for SRv6 H.L2Encaps.Red behavior")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260418162838.31979-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_clone() increments sockets_allocated and sets the socket refcount to 2.
SCTP performs additional accounting in sctp_clone_sock(), so the clone-time
increment must be undone to avoid double counting.
Note we cannot simply remove the SCTP-side increment, because the SCTP
destroy path in sctp_destroy_sock() only decrements sockets_allocated when
sp->ep is set, which may not be true for all failure paths in
sctp_clone_sock().
Fixes: 16942cf4d3 ("sctp: Use sk_clone() in sctp_accept().")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/af8d66f928dec3e9fcbee8d4a85b7d5a6b86f515.1776460180.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vikas Gupta says:
====================
bnge fixes
Patch-1:
Due to wrong HWRM sequence, driver do not get the correct
information regarding resources and capabilities.
The patch fixes the initial HWRM sequence.
Patch-2:
Remove the unsupported backing store type initialization, which is
not supported in Thor Ultra devices.
====================
Link: https://patch.msgid.link/20260418023438.1597876-1-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The backing store type, BNGE_CTX_MRAV, is not applicable in Thor Ultra
devices. Remove it from the backing store configuration, as the firmware
will not populate entities in this backing store type, due to which the
driver load fails.
Fixes: 29c5b358f3 ("bng_en: Add backing store support")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Dharmender Garg <dharmender.garg@broadcom.com>
Link: https://patch.msgid.link/20260418023438.1597876-3-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Firmware may not advertize correct resources if backing store is not
enabled before resource information is queried.
Fix the initial sequence of HWRMs so that driver gets capabilities
and resource information correctly.
Fixes: 3fa9e977a0 ("bng_en: Initialize default configuration")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rahul Gupta <rahul-rg.gupta@broadcom.com>
Link: https://patch.msgid.link/20260418023438.1597876-2-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In tpacket_snd(), when PACKET_VNET_HDR is enabled, vnet_hdr points
directly into the mmap'd TX ring buffer shared with userspace. The
kernel validates the header via __packet_snd_vnet_parse() but then
re-reads all fields later in virtio_net_hdr_to_skb(). A concurrent
userspace thread can modify the vnet_hdr fields between validation
and use, bypassing all safety checks.
The non-TPACKET path (packet_snd()) already correctly copies vnet_hdr
to a stack-local variable. All other vnet_hdr consumers in the kernel
(tun.c, tap.c, virtio_net.c) also use stack copies. The TPACKET TX
path is the only caller of virtio_net_hdr_to_skb() that reads directly
from user-controlled shared memory.
Fix this by copying vnet_hdr from the mmap'd ring buffer to a
stack-local variable before validation and use, consistent with the
approach used in packet_snd() and all other callers.
Fixes: 1d036d25e5 ("packet: tpacket_snd gso and checksum offload")
Signed-off-by: Bingquan Chen <patzilla007@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260418112006.78823-1-patzilla007@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 2bd82484bb ("xps: fix xps for stacked devices"),
skb->napi_id shares storage with sender_cpu. RX tracepoints using
net_dev_rx_verbose_template read skb->napi_id directly and can therefore
report sender_cpu values as if they were NAPI IDs.
For example, on the loopback path this can report 1 as napi_id, where 1
comes from raw_smp_processor_id() + 1 in the XPS path:
# bpftrace -e 'tracepoint:net:netif_rx_entry{ print(args->napi_id); }'
# taskset -c 0 ping -c 1 ::1
Report only valid NAPI IDs in these tracepoints and use 0 otherwise.
Fixes: 2bd82484bb ("xps: fix xps for stacked devices")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260420105427.162816-1-kohei@enjuk.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aa_dfa_unpack returns ERR_PTR not NULL when it fails, but aa_put_dfa
only checks NULL for its input, which would cause invalid memory access
in aa_put_dfa. Set nulldfa to NULL explicitly to fix that.
Fixes: 98b824ff89 ("apparmor: refcount the pdb")
Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
When booting Ubuntu 26.04 with Linux 7.0-rc4 on an ARM64 Qualcomm
Snapdragon X1 we see a string buffer overrun:
BUG: KASAN: slab-out-of-bounds in aa_dfa_match (security/apparmor/match.c:535)
Read of size 1 at addr ffff0008901cc000 by task snap-update-ns/2120
CPU: 5 UID: 60578 PID: 2120 Comm: snap-update-ns Not tainted 7.0.0-rc4+ #22 PREEMPTLAZY
Hardware name: LENOVO 83ED/LNVNB161216, BIOS NHCN60WW 09/11/2025
Call trace:
show_stack (arch/arm64/kernel/stacktrace.c:501) (C)
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
__asan_report_load1_noabort (mm/kasan/report_generic.c:378)
aa_dfa_match (security/apparmor/match.c:535)
match_mnt_path_str (security/apparmor/mount.c:244 security/apparmor/mount.c:336)
match_mnt (security/apparmor/mount.c:371)
aa_bind_mount (security/apparmor/mount.c:447 (discriminator 4))
apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1))
security_sb_mount (security/security.c:1062 (discriminator 31))
path_mount (fs/namespace.c:4101)
__arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338)
invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49)
el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2))
do_el0_svc (arch/arm64/kernel/syscall.c:152)
el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744)
el0t_64_sync (arch/arm64/kernel/entry.S:596)
Allocated by task 2120:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/arm64/include/asm/current.h:19 mm/kasan/common.c:70 mm/kasan/common.c:79)
kasan_save_alloc_info (mm/kasan/generic.c:571)
__kasan_kmalloc (mm/kasan/common.c:419)
__kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5260 mm/slub.c:5272)
aa_get_buffer (security/apparmor/lsm.c:2201)
aa_bind_mount (security/apparmor/mount.c:442)
apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1))
security_sb_mount (security/security.c:1062 (discriminator 31))
path_mount (fs/namespace.c:4101)
__arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338)
invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49)
el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2))
do_el0_svc (arch/arm64/kernel/syscall.c:152)
el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744)
el0t_64_sync (arch/arm64/kernel/entry.S:596)
The buggy address belongs to the object at ffff0008901ca000
which belongs to the cache kmalloc-rnd-06-8k of size 8192
The buggy address is located 0 bytes to the right of
allocated 8192-byte region [ffff0008901ca000, ffff0008901cc000)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9101c8
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:-1 pincount:0
flags: 0x8000000000000040(head|zone=2)
page_type: f5(slab)
raw: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70
raw: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000
head: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70
head: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000
head: 8000000000000003 fffffdffe2407201 fffffdffffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff0008901cbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008901cbf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff0008901cc000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff0008901cc080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff0008901cc100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
This was introduced by previous incorrect conversion from strcpy(). Fix it
by adding the missing terminator.
Cc: stable@vger.kernel.org
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Fixes: 93d4dbdc8d ("apparmor: Replace deprecated strcpy in d_namespace_path")
Signed-off-by: John Johansen <john.johansen@canonical.com>
In apparmor_path_rename(), when handling RENAME_EXCHANGE, the
cond_exchange structure is supposed to carry the attributes of the
*new* dentry (since it is used to authorize moving new_dentry to the
old location). However, line 412 reads:
vfsuid = i_uid_into_vfsuid(idmap, d_backing_inode(old_dentry));
This fetches the uid of old_dentry instead of new_dentry. As a result,
the RENAME_EXCHANGE permission check uses the wrong file owner, which
can allow a rename that should be denied (if old_dentry's owner has
more privileges) or deny one that should be allowed.
Note that cond_exchange.mode on the line above correctly uses
new_dentry. Only the uid lookup is wrong.
Fix by changing old_dentry to new_dentry in the i_uid_into_vfsuid call.
Fixes: 5e26a01e56 ("apparmor: use type safe idmapping helpers")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
error is initialized to -EPROTO but set by some of the internal
functions, unfortunately the last two checks assume error is set to
-EPROTO already for the failure case. Ensure it is by setting it
before these checks.
Fixes: 3d28e2397a ("apparmor: add support loading per permission tagging")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
AppArmor dfas need a minimum of two states to be valid. State 0 is the
default trap state, and State 1 the default start state. When verifying
the dfa ensure that this is the case.
Fixes: c27c6bd2c4 ("apparmor: ensure that dfa state tables have entries")
Signed-off-by: John Johansen <john.johansen@canonical.com>
- Fix ordering of dma-buf cleanup versus device disabling in vfio-pci.
(Matt Evans)
- Resolve an inconsistent and incorrect use of spinlock-irq in the
virtio vfio-pci variant by conversion to mutex and proceed to
modernize and simplify driver with use of guards. (Alex Williamson)
- Resurrect the removal of the remaining class_create() call in vfio,
replacing with const struct class and class_register().
(Jori Koolstra, Alex Williamson)
- Fix NULL pointer dereference, properly serialize interrupt setup,
and cleanup interrupt state tracking in the cdx vfio bus driver.
(Prasanna Kumar T S M, Alex Williamson)
-----BEGIN PGP SIGNATURE-----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=54Nf
-----END PGP SIGNATURE-----
Merge tag 'vfio-v7.1-rc1-pt2' of https://github.com/awilliam/linux-vfio
Pull more VFIO updates from Alex Williamson:
- Fix ordering of dma-buf cleanup versus device disabling in vfio-pci
(Matt Evans)
- Resolve an inconsistent and incorrect use of spinlock-irq in the
virtio vfio-pci variant by conversion to mutex and proceed to
modernize and simplify driver with use of guards (Alex Williamson)
- Resurrect the removal of the remaining class_create() call in vfio,
replacing with const struct class and class_register() (Jori
Koolstra, Alex Williamson)
- Fix NULL pointer dereference, properly serialize interrupt setup, and
cleanup interrupt state tracking in the cdx vfio bus driver (Prasanna
Kumar T S M, Alex Williamson)
* tag 'vfio-v7.1-rc1-pt2' of https://github.com/awilliam/linux-vfio:
vfio/cdx: Consolidate MSI configured state onto cdx_irqs
vfio/cdx: Serialize VFIO_DEVICE_SET_IRQS with a per-device mutex
vfio/cdx: Fix NULL pointer dereference in interrupt trigger path
vfio: replace vfio->device_class with a const struct class
vfio/virtio: Use guard() for bar_mutex in legacy I/O
vfio/virtio: Use guard() for migf->lock where applicable
vfio/virtio: Use guard() for list_lock where applicable
vfio/virtio: Convert list_lock from spinlock to mutex
vfio/pci: Clean up DMABUFs before disabling function
- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaeji/QAKCRBAj56VGEWX
nGHgAP4n7O4oAR9Oik3zKLN095LPpMumqSMTQ8o3TpKzNWql2AEAscjPpRoCGdPA
94CsBVwFYBYkiWd2l5lye7WvK2tNrgI=
=pNNY
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups
* tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (101 commits)
Input: charlieplex_keypad - add GPIO charlieplex keypad
dt-bindings: input: add GPIO charlieplex keypad
dt-bindings: input: add settling-time-us common property
dt-bindings: input: add debounce-delay-ms common property
Input: imx_keypad - fix spelling mistake "Colums" -> "Columns"
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()
Input: ct82c710 - remove driver
Input: mk712 - remove driver
Input: logibm - remove driver
Input: inport - remove driver
Input: qt1070 - inline i2c_check_functionality check
Input: qt1050 - inline i2c_check_functionality check
Input: aiptek - validate raw macro indices before updating state
Input: gf2k - skip invalid hat lookup values
Input: xpad - add RedOctane Games vendor id
Input: xpad - remove stale TODO and changelog header
Input: usbtouchscreen - refactor endpoint lookup
Input: aw86927 - add support for Awinic AW86938
dt-bindings: input: awinic,aw86927: Add Awinic AW86938
...
- Use list_add_tail_rcu() for walking eventfs children
The children link list is protected by SRCU and list walkers can walk the
list with only using SRCU. Using just list_add_tail() on weakly ordered
architectures can cause issues. Instead use list_add_tail_rcu().
- Hold eventfs_mutex and SRCU for remount walk events
The trace_apply_options() walks the tracefs_inodes where some are eventfs
inodes and eventfs_remount() is called which in turn calls
eventfs_set_attr(). This walk only holds normal RCU read locks, but the
eventfs_mutex and SRCU should be held. Add a eventfs_remount_(un)lock()
helpers to take the necessary locks before iterating the list.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaekrdRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6ql43AP9evY7U3aOAfPV9Zz6UEZe37Px4rDf5
7R8Udq3BxI4c0AEArooS0KILZsWnGYFfgq2KbJM4Wq4j5xHcj9VBp95WvQM=
=1RCW
-----END PGP SIGNATURE-----
Merge tag 'tracefs-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs fixes from Steven Rostedt:
- Use list_add_tail_rcu() for walking eventfs children
The linked list of children is protected by SRCU and list walkers can
walk the list with only using SRCU. Using just list_add_tail() on
weakly ordered architectures can cause issues. Instead use
list_add_tail_rcu().
- Hold eventfs_mutex and SRCU for remount walk events
The trace_apply_options() walks the tracefs_inodes where some are
eventfs inodes and eventfs_remount() is called which in turn calls
eventfs_set_attr(). This walk only holds normal RCU read locks, but
the eventfs_mutex and SRCU should be held.
Add a eventfs_remount_(un)lock() helpers to take the necessary locks
before iterating the list.
* tag 'tracefs-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Hold eventfs_mutex and SRCU when remount walks events
eventfs: Use list_add_tail_rcu() for SRCU-protected children list
- Fix month in date timestamp used to create failure directories
On failure, a directory is created to store the logs and config file to
analyze the failure. The Perl function localtime is used to create the
data timestamp of the directory. The month passed back from that
function starts at 0 and not 1, but the timestamp used does not account
for that. Thus for April 20, 2026, the timestamp of 20260320 is used,
instead of 20260420.
- Save the logfile to the failure directory
Just the test log is saved to the directory on failure, but there's
useful information in the full logfile that can be helpful to analyzing
the failure. Save the logfile as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaeknTxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qm9hAP9jPNvXaCqvcGfz9QN2fEOs7sWWVOAQ
gryZ8Nyqn4CmswD/aQkYBVRSeWsvUrbw7WYrFvEOH0hUfKD6CaFLaA6EigE=
=ONM2
-----END PGP SIGNATURE-----
Merge tag 'ktest-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Fix month in date timestamp used to create failure directories
On failure, a directory is created to store the logs and config file
to analyze the failure. The Perl function localtime is used to create
the data timestamp of the directory. The month passed back from that
function starts at 0 and not 1, but the timestamp used does not
account for that. Thus for April 20, 2026, the timestamp of 20260320
is used, instead of 20260420.
- Save the logfile to the failure directory
Just the test log was saved to the directory on failure, but there's
useful information in the full logfile that can be helpful to
analyzing the failure. Save the logfile as well.
* tag 'ktest-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add logfile to failure directory
ktest: Fix the month in the name of the failure directory
- Make undefsyms_base.c into a real file
The file undefsyms_base.c is used to catch any symbols used by a remote
ring buffer that is made for use of a pKVM hypervisor. As it doesn't share
the same text as the rest of the kernel, referencing any symbols within
the kernel will make it fail to be built for the standalone hypervisor.
A file was created by the Makefile that checked for any symbols that could
cause issues. There's no reason to have this file created by the Makefile,
just create it as a normal file instead.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaekbsxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr0MAQCHMFK56uzmMvQJg5Tfhtb+grY7ryo4
j0rjLkNQBovmxwD/XylBDkhxr8IQ72jU04e+xuXzrqoT18U7XvQEVpPgkQQ=
=dQi0
-----END PGP SIGNATURE-----
Merge tag 'trace-ring-buffer-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fix from Steven Rostedt:
- Make undefsyms_base.c into a real file
The file undefsyms_base.c is used to catch any symbols used by a
remote ring buffer that is made for use of a pKVM hypervisor. As it
doesn't share the same text as the rest of the kernel, referencing
any symbols within the kernel will make it fail to be built for the
standalone hypervisor.
A file was created by the Makefile that checked for any symbols that
could cause issues. There's no reason to have this file created by
the Makefile, just create it as a normal file instead.
* tag 'trace-ring-buffer-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Make undefsyms_base.c a first-class citizen
Only a very small update for kgdb this cycle: a single patch from Kexin Sun
that fixes some outdated comments.
Signed-off-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
-----BEGIN PGP SIGNATURE-----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=MegD
-----END PGP SIGNATURE-----
Merge tag 'kgdb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb update from Daniel Thompson:
"Only a very small update for kgdb this cycle: a single patch from
Kexin Sun that fixes some outdated comments"
* tag 'kgdb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb: update outdated references to kgdb_wait()
