sashiko reports for unrelated patch:
Does the core ebtables initialization in ebtables.c suffer from a similar race?
Once nf_register_sockopt() completes, the sockopts are exposed globally.
sockopt has to be registered last, just like in ip/ip6/arptables.
Fixes: 5b53951cfc ("netfilter: ebtables: use net_generic infra")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Similar to the previous ebtables patch:
template add exposes the table to userspace, we must do this last to
rnsure the pernet ops are set up (contain the destructors).
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
sashiko reported for a related patch:
In modules like iptable_raw.c, [..], if register_pernet_subsys() fails,
the rollback might call kfree(rawtable_ops) before [..]
During this window, could a concurrent userspace process find the globally
visible template, trigger table_init(), [..]
The table init functions must always register the template last.
Otherwise, set/getsockopt can instantiate a table in a namespace
while the required pernet ops (contain the destructor) isn't available.
This change is also required in x_tables, handled in followup change.
Fixes: 87663c39f8 ("netfilter: ebtables: do not hook tables by default")
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Like previous patches for x_tables, follow same pattern in ebtables.
We can't reuse xt helpers: ebt_table struct layout is incompatible.
table->ops assignment is now done while still holding the ebt mutex
to make sure we never expose partially-filled table struct.
Fixes: 87663c39f8 ("netfilter: ebtables: do not hook tables by default")
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Previous change added xtables_unregister_table_pre_exit to detach the
table from the packetpath and to unlink it from the active table list.
In case of rmmod, userspace that is doing set/getsockopt for this table
will not be able to re-instantiate the table:
1. The larval table has been removed already
2. existing instantiated table is no longer on the xt pernet table list.
This adds the second stage helper:
unlink the table from the dying list, free the hook ops (if any) and do
the audit notification. It replaces xt_unregister_table().
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Reported-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When the module is going away we need to zap the template
first. Else there is a small race window where userspace
could instantiate a new table after the pernet exit function
has removed the current table.
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Reported-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Remove the copypasted variants of _pre_exit and add one single
function in the xtables core. ebtables is not compatible with
x_tables and therefore unchanged.
This is a preparation patch to reduce noise in the followup
bug fixes.
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
arp/ip(6)t_register_table() add the table to the per-netns list via
xt_register_table() before allocating the per-netns hook ops copy
via kmemdup_array(). This leaves a window where the table is
visible in the list with ops=NULL.
If the pernet exit happens runs concurrently the pre_exit callback finds
the table via xt_find_table() and passes the NULL ops pointer to
nf_unregister_net_hooks(), causing a NULL dereference:
general protection fault in nf_unregister_net_hooks+0xbc/0x150
RIP: nf_unregister_net_hooks (net/netfilter/core.c:613)
Call Trace:
ipt_unregister_table_pre_exit
iptable_mangle_net_pre_exit
ops_pre_exit_list
cleanup_net
Fix by moving the ops allocation into the xtables core so the table is
never in the list without valid ops. Also ensure the table is no longer
processing packets before its torn down on error unwind.
nf_register_net_hooks might have published at least one hook; call
synchronize_rcu() if there was an error.
audit log register message gets deferred until all operations have
passed, this avoids need to emit another ureg message in case of
error unwinding.
Based on earlier patch by Tristan Madani.
Fixes: f9006acc8d ("netfilter: arp_tables: pass table pointer via nf_hook_ops")
Fixes: ee177a5441 ("netfilter: ip6_tables: pass table pointer via nf_hook_ops")
Fixes: ae68933422 ("netfilter: ip_tables: pass table pointer via nf_hook_ops")
Link: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
At the moment we emit the audit log a bit too early, which makes it
necessary to also emit an unregister log in case we have to unwind
errors after possible hook register failure.
Followup patch will be slightly simpler if we can delay the
register message until after the hooks have been wired up.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ads7871_read_reg16() function relies on spi_w8r16() to read the
16-bit sensor output. The ADS7871 device transmits the Least Significant
Byte (LSB) first.
On Little-Endian architectures, spi_w8r16() correctly reconstructs the
16-bit value. However, on Big-Endian architectures, the byte swapping
causes the first received byte (LSB) to be placed in the most significant
byte of the u16, resulting in corrupted voltage readings.
To fix this, cast the integer result of spi_w8r16() to a restricted
__le16 type and convert it to the host CPU's native byte order using
le16_to_cpu(). Negative error codes returned by the SPI core are caught
and returned prior to the conversion to avoid mangling the error status.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260418034601.90226-1-tabreztalks@gmail.com
Fixes: e0c70b8078 ("hwmon: add TI ads7871 a/d converter driver")
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Tabrez Ahmed <tabreztalks@gmail.com>
Link: https://lore.kernel.org/r/20260502020844.110038-2-tabreztalks@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sensors configurations are defined by set and clear masks. These
do not follow a consistent "clear mask is a superset of set mask"
rule. This relaxed definition breaks lm75_write_config()
static inline int lm75_write_config(struct lm75_data *data, u16 set_mask,
u16 clr_mask)
{
return regmap_update_bits(data->regmap, LM75_REG_CONF,
clr_mask | LM75_SHUTDOWN, set_mask);
}
Basically all bits from set_mask that are not defined in clr_mask are
dropped. Fix that by enhancing the helper to always combine clr_mask
and set_mask into the mask bits of regmap_update_bits().
Fixes: 6da24a25f7 ("hwmon: (lm75) Hide register size differences in regmap access functions")
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://lore.kernel.org/r/20260502173207.3567876-3-markus.stockhausen@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The initialization of the AS6200 has two shortcomings
- The device-add-commit states "Conversion mode: continuous" but the
the lm75_params structure uses set_mask = 0x94c0. This activates
single shot mode (bit 15). According to the datasheet "The device
features a single shot measurement mode if the device is in sleep
mode (SM=1)". This is quite contradictionary.
- It is the only device that activates polarity active-high (bit 10)
All this is paired with a undefined clear mask bug in function
lm75_write_config() that was introduced with a later refactoring
commit.
[as6200] = {
.config_reg_16bits = true,
.set_mask = 0x94C0,
-> .clr_mask not defined here
.default_resolution = 12,
...
static inline int lm75_write_config(struct lm75_data *data, u16 set_mask,
u16 clr_mask)
{
return regmap_update_bits(data->regmap, LM75_REG_CONF,
clr_mask | LM75_SHUTDOWN, set_mask);
}
regmap_update_bits() requires clr_mask to be a superset of set_mask.
So basically all sensors with "wrong" masks like the AS6200 are not
initialized as intended.
Fix that by
- Change the set_mask to 0xc010 to reflect the current active-low
setup properly and to drive the sensor in continous mode. This
takes into account that the config register is little endian and
the first byte sent to the chip is the LSB.
- Adapt the alarm handling so it can report the alarm correctly
even if it is high active. This is done by comparing config register
bit 5 and 10 (translated to 2 and 13).
This commit does not introduce any ABI breakage as the mutliple bugs
effectly drive the AS6200 in standard active-low mode.
Fixes: 4b6358e1fe ("hwmon: (lm75) Add AMS AS6200 temperature sensor")
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://lore.kernel.org/r/20260502173207.3567876-2-markus.stockhausen@gmx.de
[groeck: Update set_mask for as6200 further: As modeled, the upper bits
contain the conversion rate, so the config register needs to be set to
0xc010 instead of 0x10c0 to reflect 8 samples/s and 4 consecutive faults.
Fix the same problem for TMP112.]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Add NULL check for media_gt in intel_hdcp_gsc_check_status (Gustavo)
- Fix EAGAIN sign in pf_migration_consume (Shuicheng)
- Fix MMIO access using PF view instead of VF view during migration (Shuicheng)
- Exclude indirect ring state page from ADS engine state size (Satya)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/afw5lsrjE4pStEml@gsse-cloud1.jf.intel.com
- Fix unsound initialization in drm::Device::new(); if pinned
initialization of drm::Device::Data fails, make sure
drm::Device::release() isn't called, so we don't run the data's
destructor
- Fix missing GEM state cleanup in the init failure case; call
drm_gem_private_object_fini() if drm_gem_object_init() fails
- Fix wrong ARef import in the DRM shmem GEM helper abstraction
- Replace the nouveau mailing list with the new nova-gpu mailing list
for both nova-core and nova-drm, and remove unused patchwork entries
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCafvHOQAKCRBFlHeO1qrK
LsJDAPsEb5Kmth5WyT3cgJxNFVTLebkzMZ1OdNkTnJ8PHstNTAEA7wj0t2nB8lJz
Xy3qh75pKfrBt597MUVyhZY/z9+6gw0=
=EWEG
-----END PGP SIGNATURE-----
Merge tag 'drm-rust-fixes-2026-05-07' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-fixes
DRM Rust fixes for v7.1-rc3
- Fix unsound initialization in drm::Device::new(); if pinned
initialization of drm::Device::Data fails, make sure
drm::Device::release() isn't called, so we don't run the data's
destructor
- Fix missing GEM state cleanup in the init failure case; call
drm_gem_private_object_fini() if drm_gem_object_init() fails
- Fix wrong ARef import in the DRM shmem GEM helper abstraction
- Replace the nouveau mailing list with the new nova-gpu mailing list
for both nova-core and nova-drm, and remove unused patchwork entries
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://patch.msgid.link/DIBZJ40ZC4J3.Y1DLA7JTS2PC@kernel.org
When fallocate() with FALLOC_FL_KEEP_SIZE preallocates an extent past the
current i_size, the file_extent_tree of the inode is updated to cover
that range. However, on the next mount, btrfs_read_locked_inode() only
re-populates file_extent_tree with [0, round_up(i_size, sectorsize)),
losing the marks that belonged to the KEEP_SIZE prealloc extent beyond
i_size.
Later, when a non-KEEP_SIZE fallocate() extends i_size into / past that
old prealloc extent, the reservation loop in btrfs_fallocate() skips
already-prealloc segments and does not call into the path that marks the
file_extent_tree, so a gap remains inside the file_extent_tree across
[old_aligned_i_size, start_of_new_alloc). Then __btrfs_prealloc_file_range()
calls btrfs_inode_safe_disk_i_size_write(), which uses
find_contiguous_extent_bit() starting at offset 0 to derive disk_i_size.
The walk stops at the gap, so disk_i_size ends up smaller than i_size and
gets persisted. After the next mount, the file shows the wrong (smaller)
size.
The following reproducer triggers the problem:
$ cat test.sh
MNT=/mnt/sdi
DEV=/dev/sdi
mkdir -p $MNT
mkfs.btrfs -f -O ^no-holes $DEV
mount $DEV $MNT
touch $MNT/file1
# KEEP_SIZE prealloc beyond i_size (i_size stays 0)
fallocate -n -o 4M -l 4M $MNT/file1
umount $MNT
mount $DEV $MNT
# non-KEEP_SIZE fallocate that overlaps the previous prealloc tail
# and extends past it
fallocate -o 7M -l 2M $MNT/file1
ls -lh $MNT/file1
umount $MNT
mount $DEV $MNT
ls -lh $MNT/file1
umount $MNT
Running the reproducer gives the following result:
$ ./test.sh
(...)
-rw-rw-r-- 1 root root 9.0M May 4 16:35 /mnt/sdi/file1
-rw-rw-r-- 1 root root 7.0M May 4 16:35 /mnt/sdi/file1
The size before the second mount is correct (9M), but after the
remount it drops to 7M, i.e. the start of the gap inside file_extent_tree.
Fix this in __btrfs_prealloc_file_range() by marking the entire range
[round_down(old_i_size, sectorsize), round_up(new_i_size, sectorsize))
in file_extent_tree before updating i_size and calling
btrfs_inode_safe_disk_i_size_write(). This ensures the contiguous bit
search starting from 0 is not truncated by a stale gap left behind by a
previous KEEP_SIZE prealloc that was not restored on inode load.
The fix has no effect when the NO_HOLES feature is enabled because
btrfs_inode_safe_disk_i_size_write() and
btrfs_inode_set_file_extent_range()
both take the fast path that directly tracks disk_i_size without
consulting file_extent_tree.
Fixes: 9ddc959e80 ("btrfs: use the file extent tree infrastructure")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
[ Minor updates to the change log ]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[WARNING]
With extra warning on dirty extent buffers at umount (aka, the next
patch in the series), test case generic/388 can trigger the following
warning about dirty extent buffers at unmount time:
BTRFS critical (device dm-2 state E): emergency shutdown
BTRFS error (device dm-2 state E): error while writing out transaction: -30
BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction.
BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30)
BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem
BTRFS info (device dm-2 state EA): forced readonly
BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c
------------[ cut here ]------------
WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368
CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs]
Call Trace:
<TASK>
close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
generic_shutdown_super+0x89/0x1a0
kill_anon_super+0x16/0x40
btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
deactivate_locked_super+0x2d/0xb0
cleanup_mnt+0xdc/0x140
task_work_run+0x5a/0xa0
exit_to_user_mode_loop+0x123/0x4b0
do_syscall_64+0x243/0x7c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7
I'm using a stripped down version, which seems to trigger the warning
more reliably:
_fsstress_pid=""
workload()
{
dmesg -C
mkfs.btrfs -f -K $dev > /dev/null
echo 1 > /sys/kernel/debug/clear_warn_once
mount $dev $mnt
$fsstress -w -n 1024 -p 4 -d $mnt &
_fsstress_pid=$!
sleep 0
$godown $mnt
pkill --echo -PIPE fsstress > /dev/null
wait $_fsstress_pid
unset _fsstress_pid
umount $mnt
if dmesg | grep -q "WARNING"; then
fail
fi
}
for (( i = 0; i < $runtime; i++ )); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
Inside btrfs_write_and_wait_transaction(), we first try to write all
dirty ebs, then wait for them to finish.
After that we call btrfs_extent_io_tree_release() to free all
extent states from dirty_pages io tree.
However if we hit an error from btrfs_write_marked_extent(), then we
still call btrfs_extent_io_tree_release() to clear that dirty_pages io
tree, which may contain dirty records that we haven't yet submitted.
Furthermore, the later transaction cleanup path will utilize that
dirty_pages io tree to properly cleanup those dirty ebs, but since it's
already empty, no dirty ebs are properly cleaned up, thus will later
trigger the warnings inside invalidate_btree_folios().
[FIX]
Normally such dirty ebs won't cause problems, as when the iput() is
called on the btree inode, the dirty ebs will be forcibly written back,
and since the fs is already in an error status, such writeback will not
reach disk and finish immediately.
But it's still better to get rid of such dirty ebs, if we ended up with
dirty ebs but the fs is not in an error status, then such writeback at
iput() time will be too late, as all workers are already stopped but
writeback will utilize workers, which will lead to NULL pointer
dereferences.
Instead of unconditionally calling btrfs_extent_io_tree_release(), only
call it if btrfs_write_and_wait_transaction() finished successfully, so
that @dirty_pages extent io tree is kept untouched for transaction
cleanup.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The trace event btrfs_sync_file() is called in an atomic context (all trace
events are) and its call to dput(), which is needed due to the call to
dget_parent(), can sleep, triggering a kernel splat.
This can be reproduced by enabling the trace event and running btrfs/056
from fstests for example. The splat shown in dmesg is the following:
[53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970
[53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io
[53.988] preempt_count: 2, expected: 0
[53.967] RCU nest depth: 0, expected: 0
[53.943] Preemption disabled at:
[53.944] [<0000000000000000>] 0x0
[54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full)
[54.070] Tainted: [W]=WARN
[54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[54.072] Call Trace:
[54.074] <TASK>
[54.076] dump_stack_lvl+0x56/0x80
[54.079] __might_resched.cold+0xd6/0x10f
[54.072] dput.part.0+0x24/0x110
[54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs]
[54.089] btrfs_sync_file+0x1ed/0x530 [btrfs]
[54.087] ? __handle_mm_fault+0x8ae/0xed0
[54.089] btrfs_do_write_iter+0x172/0x210 [btrfs]
[54.091] vfs_write+0x21f/0x450
[54.094] __x64_sys_pwrite64+0x8d/0xc0
[54.096] ? do_user_addr_fault+0x20c/0x670
[54.099] do_syscall_64+0x60/0xf20
[54.092] ? clear_bhb_loop+0x60/0xb0
[54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e
So stop using dget_parent() and dput() and access the parent dentry
directly as dentry->d_parent. This is also what ext4 is doing in
its equivalent trace event ext4_sync_file_enter().
Fixes: a85b46db14 ("btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A build workload newly prints order-0 allocation failures on 7.1-rc1:
sh: page allocation failure: order:0
mode:0x14084a(__GFP_HIGHMEM|__GFP_MOVABLE|__GFP_IO|__GFP_KSWAPD_RECLAIM|
__GFP_COMP|__GFP_HARDWALL)
CPU: 27 UID: 1000 PID: 855540 Comm: sh Not tainted 7.1.0-rc1-llvm-00058-gdca922e019dd #1 PREEMPTLAZY
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
warn_alloc+0xeb/0x100
__alloc_pages_slowpath+0x567/0x5a0
? filemap_get_entry+0x11a/0x140
__alloc_frozen_pages_noprof+0x249/0x2d0
alloc_pages_mpol+0xe4/0x180
folio_alloc_noprof+0x80/0xa0
add_ra_bio_pages+0x13c/0x4b0
btrfs_submit_compressed_read+0x229/0x300
submit_one_bio+0x9e/0xe0
btrfs_readahead+0x185/0x1a0
[...]
(lldb) source list -a add_ra_bio_pages+0x13c
.../vmlinux.unstripped add_ra_bio_pages + 316 at .../fs/btrfs/compression.c:454:8
451
452 folio = filemap_alloc_folio(mapping_gfp_constraint(mapping, constraint_gfp),
453 0, NULL);
-> 454 if (!folio)
455 break;
I can reproduce this consistently by running a memory hog concurrently
with a buffered writer on a machine with a very large amount of swap.
Commit 7ae37b2c94 ("btrfs: prevent direct reclaim during compressed
readahead") clearly intended to suppress these warnings. But because the
mask set in the address_space with mapping_set_gfp_mask() doesn't include
__GFP_NOWARN, mapping_gfp_constraint() removes it from constraint_gfp
before it is passed to filemap_alloc_folio().
Fix by refactoring the code to add __GFP_NOWARN after the call to
mapping_gfp_constraint().
Fixes: 7ae37b2c94 ("btrfs: prevent direct reclaim during compressed readahead")
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
A corrupted image with a chunk present in the chunk tree but whose
corresponding block group item is missing from the extent tree can be
mounted successfully, even though check_chunk_block_group_mappings()
is supposed to catch exactly this corruption at mount time. Once
mounted, running btrfs balance with a usage filter (-dusage=N or
-dusage=min..max) triggers a null-ptr-deref:
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
RIP: 0010:chunk_usage_filter fs/btrfs/volumes.c:3874 [inline]
RIP: 0010:should_balance_chunk fs/btrfs/volumes.c:4018 [inline]
RIP: 0010:__btrfs_balance fs/btrfs/volumes.c:4172 [inline]
RIP: 0010:btrfs_balance+0x2024/0x42b0 fs/btrfs/volumes.c:4604
[CAUSE]
The crash occurs because __btrfs_balance() iterates the on-disk chunk
tree, finds the orphaned chunk, calls chunk_usage_filter() (or
chunk_usage_range_filter()), which queries the in-memory block group
cache via btrfs_lookup_block_group(). Since no block group was ever
inserted for this chunk, the lookup returns NULL, and the subsequent
dereference of cache->used crashes.
check_chunk_block_group_mappings() uses btrfs_find_chunk_map() to
iterate the in-memory chunk map (fs_info->mapping_tree):
map = btrfs_find_chunk_map(fs_info, start, 1);
With @start = 0 and @length = 1, btrfs_find_chunk_map() looks for a
chunk map that *contains* the logical address 0. If no chunk contains
logical address 0, btrfs_find_chunk_map(fs_info, 0, 1) returns NULL
immediately and the loop breaks after the very first iteration,
having checked zero chunks. The entire verification function is therefore
a no-op, and the corrupted image passes the mount-time check undetected.
[FIX]
Replace the btrfs_find_chunk_map() based loop with a direct in-order
walk of fs_info->mapping_tree using rb_first_cached() + rb_next().
This guarantees that every chunk map in the tree is visited regardless
of the logical addresses involved.
No lock is taken around the traversal. This function is called during
mount from btrfs_read_block_groups(), which is invoked from open_ctree()
before any background threads (cleaner, transaction kthread, etc.) are
started. There are therefore no concurrent writers that could modify
mapping_tree at this point. An analogous lockless direct traversal of
mapping_tree already exists in fill_dummy_bgs() in the same file.
Since we walk the rb-tree directly via rb_entry() without going through
btrfs_find_chunk_map(), no reference is taken on each map entry, so the
btrfs_free_chunk_map() calls are also removed.
Signed-off-by: ZhengYuan Huang <gality369@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
scx_find_sub_sched()'s only caller, scx_bpf_sub_dispatch(), is gated on
CONFIG_EXT_SUB_SCHED. When CONFIG_EXT_SUB_SCHED=n the caller compiles out
and the stub becomes dead code, tripping -Wunused-function on randconfigs.
Drop the stub.
Fixes: 25037af712 ("sched_ext: Add rhashtable lookup for sub-schedulers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202605080556.42PXw8U9-lkp@intel.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Since prepare_alloc_pages() unconditionally adds __GFP_HARDWALL for the
fast path when cpusets are enabled, the __GFP_HARDWALL check in
cpuset_current_node_allowed() causes the PF_EXITING escape path to be
skipped on the first allocation attempt. This makes it unreachable in
the common case, so dying tasks can get stuck in direct reclaim or even
trigger OOM while trying to exit, despite being allowed to allocate from
any node.
Move the PF_EXITING check before __GFP_HARDWALL so that dying tasks
can allocate memory from any node to exit quickly, even when cpusets
are enabled.
Also update the function comment to reflect the actual behavior of
prepare_alloc_pages() and the corrected check ordering.
Signed-off-by: Chen Wandun <chenwandun@lixiang.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_link_sched() holds scx_sched_lock. The scx_error() calls inside take the
same lock through scx_claim_exit() and deadlock. Move them out of the guard.
Fixes: 6b4576b097 ("sched_ext: Reject sub-sched attachment to a disabled parent")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
parse_sec_desc(), build_sec_desc(), and the chown path in
id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd
before proving a DACL header fits inside the returned security
descriptor.
On 32-bit builds a malicious server can return dacloffset near
U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip
past the later pointer-based bounds checks. build_sec_desc() and
id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped
pointer in the chmod/chown rewrite paths.
Validate dacloffset numerically before building any DACL pointer and
reuse the same helper at the three DACL entry points.
Fixes: bc3e9dd9d1 ("cifs: Change SIDs in ACEs while transferring file ownership.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If a server sends a truncated response but a large OutputBufferLength, and
terminates the EA list early, check_wsl_eas() returns success without
validating that the entire OutputBufferLength fits within iov_len.
Then smb2_compound_op() does:
memcpy(idata->wsl.eas, data[0], size[0]);
Where size[0] is OutputBufferLength. If iov_len is smaller than size[0],
memcpy can read beyond the end of the rsp_iov allocation and leak adjacent
kernel heap memory.
Link: https://lore.kernel.org/linux-cifs/d998240c-aca9-420d-9dbd-f5ba24af19e0@chenxiaosong.com/
Fixes: ea41367b2a ("smb: client: introduce SMB2_OP_QUERY_WSL_EA")
Cc: stable@vger.kernel.org
Signed-off-by: Zisen Ye <zisenye@stu.xidian.edu.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since smb2_check_message() returns success without length validation for
the symlink error response, in symlink_data() it is possible for
iov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the buffer
only contains the base SMB2 header (64 bytes), accessing
err->ErrorContextCount (at offset 66) or err->ByteCount later in
symlink_data() will cause an out-of-bounds read.
Link: https://lore.kernel.org/linux-cifs/297d8d9b-adf7-42fd-a1c2-5b1f230032bc@chenxiaosong.com/
Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Cc: Stable@vger.kernel.org
Signed-off-by: Zisen Ye <zisenye@stu.xidian.edu.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Per MS-SMB2 section 3.2.5.3, Session.SessionKey is the first 16 bytes
of the GSS cryptographic key, right-padded with zero bytes if the key
is shorter than 16 bytes.
SMB2_auth_kerberos() copies the GSS session key from the cifs.upcall
response using kmemdup(msg->data, msg->sesskey_len, ...) and stores
the GSS-reported length verbatim in ses->auth_key.len. generate_key()
reads SMB2_NTLMV2_SESSKEY_SIZE bytes from this buffer when feeding the
HMAC-SHA256 KDF for signing key derivation. If a GSS mechanism returns
a session key shorter than 16 bytes (e.g. a deprecated single-DES
Kerberos enctype with an 8-byte session key), the KDF call performs an
out-of-bounds slab read and derives keys that do not match the server,
which pads per the spec.
Modern KDCs disable short-key enctypes by default, so this is latent
rather than reachable in production, but it is still a kernel heap
over-read.
Allocate auth_key.response with kzalloc() at a length of
max(msg->sesskey_len, SMB2_NTLMV2_SESSKEY_SIZE), copy the GSS key in,
and rely on kzalloc()'s zero initialization for the spec-mandated
padding. Set ses->auth_key.len to the padded length. Larger GSS keys
(e.g. the 32-byte aes256-cts-hmac-sha1-96 session key) continue to be
stored at their natural length, preserving the FullSessionKey path.
Emit a cifs_dbg(VFS, ...) message when a short key is encountered to
surface deprecated-enctype usage.
NTLMv2 and NTLMSSP code paths produce a 16-byte session key by
construction and are unaffected.
Signed-off-by: Piyush Sachdeva <psachdeva@microsoft.com>
Signed-off-by: Piyush Sachdeva <s.piyush1024@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When Kerberos authentication is used with AES-256 encryption (AES-256-CCM
or AES-256-GCM), the SMB3 encryption and decryption keys must be derived
using the full session key (Session.FullSessionKey) rather than just the
first 16 bytes (Session.SessionKey).
Per MS-SMB2 section 3.2.5.3.1, when Connection.Dialect is "3.1.1" and
Connection.CipherId is AES-256-CCM or AES-256-GCM, Session.FullSessionKey
must be set to the full cryptographic key from the GSS authentication
context. The encryption and decryption key derivation (SMBC2SCipherKey,
SMBS2CCipherKey) must use this FullSessionKey as the KDF input. The
signing key derivation continues to use Session.SessionKey (first 16
bytes) in all cases.
Previously, generate_key() hardcoded SMB2_NTLMV2_SESSKEY_SIZE (16) as the
HMAC-SHA256 key input length for all derivations. When Kerberos with
AES-256 provides a 32-byte session key, the KDF for encryption/decryption
was using only the first 16 bytes, producing keys that did not match the
server's, causing mount failures with sec=krb5 and require_gcm_256=1.
Add a full_key_size parameter to generate_key() and pass the appropriate
size from generate_smb3signingkey():
- Signing: always SMB2_NTLMV2_SESSKEY_SIZE (16 bytes)
- Encryption/Decryption: ses->auth_key.len when AES-256, otherwise 16
Also fix cifs_dump_full_key() to report the actual session key length for
AES-256 instead of hardcoded CIFS_SESS_KEY_SIZE, so that userspace tools
like Wireshark receive the correct key for decryption.
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Piyush Sachdeva <psachdeva@microsoft.com>
Signed-off-by: Piyush Sachdeva <s.piyush1024@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that
IPv6 itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi: cw1200: revert "Fix locking in error paths"
- wifi: ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix: fix an issue between garbage collection and PEEK
- af_unix: fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmn8whsACgkQMUZtbf5S
IrtH+w//SEA3x/LuhHYW7dAr6j+yF5YXnGQ5+DlvUI2N5MzzLRKZqPQB9XSNzQEv
Ptq8XAoNY+ItZft8GjTGOQddMDPYi+sS43Lt5t2W1Fq74tUkI+9YEPin0WH9WapQ
uy7e9/15/gJW+3jQeCg4KYMwf65THCUhoSNZO5ORIeVuT/m0OdsoVLNwuM6zjzNZ
hwOGWZDFn06M0tm8oL2LnE9D/iXqztgnHhcSVMe5X3uCgK7EHMySjmj4JsjdEV6R
9U83zG+5/VKjVc7fGiozCiYk5ctiGYFMhvLUDZtdxNpf95rVRpCWu2TNx4gsCh9E
QaOarvqHXTrrG4bz57vN7Bcegcjk+5GvREIPNznEWfMN+k3Tft9x+wEHP5MGBbn3
K+2JGoNF7aTQGlBuH/szPdHh3m0V3oTRu1azisY0NiAGUKHageQAch6uHTm/7ixj
iNmOQ/aY10ITlhUqmTN2jHdl+8bgtMOmaV9zyn5588UWakVu+5zUGTtxjefrxMiQ
bYTs9Ya54BM5dKVT1tbgKs6ZY+shb8Erncd8vr0ltUmp8UW4Ovz6FxQ9tRP7tAaV
vRAQYWE50751YUjqwJJShWpKAlWJlJ0jELEsYYXNeeBbmpMYLm9vgGf7+2TNXToE
0dth3eJTGhzYYDqqgC9Q2ZlkbhdCMWotde9vMUGdhiErgorKsqs=
=ogzY
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, IPsec, Bluetooth and WiFi.
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that IPv6
itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi:
- cw1200: revert "Fix locking in error paths"
- ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix:
- fix an issue between garbage collection and PEEK
- fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)"
* tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (190 commits)
net: sparx5: configure serdes for 1000BASE-X in sparx5_port_init()
net: sparx5: fix wrong chip ids for TSN SKUs
net: stmmac: dwmac-nuvoton: fix NULL pointer dereference in nvt_set_phy_intf_sel()
tcp: Fix dst leak in tcp_v6_connect().
ipmr: Call ipmr_fib_lookup() under RCU.
net: phy: broadcom: Save PHY counters during suspend
net/smc: fix missing sk_err when TCP handshake fails
af_unix: Reject SIOCATMARK on non-stream sockets
veth: fix OOB txq access in veth_poll() with asymmetric queue counts
eth: fbnic: fix double-free of PCS on phylink creation failure
net: ethernet: cortina: Drop half-assembled SKB
selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl
selftests: mptcp: check output: catch cmd errors
mptcp: pm: prio: skip closed subflows
mptcp: pm: ADD_ADDR rtx: return early if no retrans
mptcp: pm: ADD_ADDR rtx: skip inactive subflows
mptcp: pm: ADD_ADDR rtx: resched blocked ADD_ADDR quicker
mptcp: pm: ADD_ADDR rtx: free sk if last
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
mptcp: pm: ADD_ADDR rtx: fix potential data-race
...
In mxt_update_cfg(), the driver calculates the memory size needed to store
the configuration as data->mem_size - cfg.start_ofs. If data->mem_size is
less than or equal to cfg.start_ofs, this calculation will underflow or
result in a zero-size buffer, neither of which is valid for a configuration
update.
Add a check to return -EINVAL if data->mem_size is too small. While at it,
change the types of start_ofs and mem_size in struct mxt_cfg to u16 to
match the device address space.
Assisted-by: Gemini:gemini-3.1-pro
Link: https://patch.msgid.link/20260504185448.4055973-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a configuration file provides an object size that is larger than the
driver's known mxt_obj_size(object), the driver intends to discard the
extra bytes.
The loop iterates using for (i = 0; i < size; i++). Inside the loop, the
condition to skip processing extra bytes is:
if (i > mxt_obj_size(object))
continue;
Since i is a 0-based index, the valid indices for the object are 0 through
mxt_obj_size(object) - 1.
When i == mxt_obj_size(object), the condition evaluates to false, and the
code processes the byte instead of discarding it.
This causes the code to calculate byte_offset = reg + i - cfg->start_ofs
and writes the byte there, overwriting exactly one byte of the adjacent
instance or object.
Update the boundary check to skip extra bytes correctly by using >=.
Fixes: 50a77c658b ("Input: atmel_mxt_ts - download device config using firmware loader")
Cc: stable@vger.kernel.org
Assisted-by: Gemini:gemini-3.1-pro
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260504185448.4055973-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of assigning the pci_device_id members using a list (which is
hard to read as you need to look at the order of the members in that
struct in parallel) use the PCI_VDEVICE() convenience macro to compact
the initialisation while improving readability.
Also drop trailing zeros that the compiler will care about then.
The change doesn't introduce binary changes to the compiled driver,
verified on both ARCH=x86 and ARCH=arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260507160051.3315630-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
sparx5_port_init() only invokes sparx5_serdes_set() and the associated
shadow-device enable and low-speed device switch for SGMII and QSGMII.
On any port with a high-speed primary device (DEV5G/DEV10G/DEV25G)
configured for 1000BASE-X the serdes is therefore left uninitialized,
the DEV2G5 shadow is never enabled, and the port stays pointed at its
high-speed device rather than the DEV2G5. The PCS1G block looks
healthy in isolation, but no frames reach the link partner.
Add 1000BASE-X to the check so the same three steps run.
Note: the same issue might apply to 2500BASE-X, but that will,
eventually, be addressed in a separate commit.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 946e7fd505 ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260506-misc-fixes-sparx5-lan969x-v2-4-fb236aa96908@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TSN SKUs in enum spx5_target_chiptype have incorrect IDs:
SPX5_TARGET_CT_7546TSN = 0x47546,
SPX5_TARGET_CT_7549TSN = 0x47549,
SPX5_TARGET_CT_7552TSN = 0x47552,
SPX5_TARGET_CT_7556TSN = 0x47556,
SPX5_TARGET_CT_7558TSN = 0x47558,
The value read back from the chip is GCB_CHIP_ID_PART_ID, which is a
GENMASK(27, 12) field, i.e. at most 16 bits wide. It can never match
these IDs, so probing a TSN part fails with a "Target not supported"
error.
Fix the enum to use the actual 16-bit part IDs returned by the
hardware: 0x0546, 0x0549, 0x0552, 0x0556 and 0x0558.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 3cfa11bac9 ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260506-misc-fixes-sparx5-lan969x-v2-3-fb236aa96908@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Again a collection of small fixes, mostly for device-specific ones.
The only big LOC is about the removal of pretty old dead code in
ab8500 codec driver, while the rest all nice small changes.
* Core / API:
- Fix race in deferred fasync state checks
- Fix UMP group filtering in sequencer
* ASoC:
- cs35l56: fixes for driver cleanup and error paths
- tas2764/2770: workaround for bogus temperature readings
- wm_adsp: fixes for firmware unit tests
- amd-yc: more DMI quirks for laptops
- Minor fixes for fsl_xcvr and spacemit
* HD-Audio:
- Mute LED and speaker quirks for HP, Lenovo, and Xiaomi laptops
* USB-audio:
- New device-specific quirks (Motu, JBL, AlphaTheta, Razer)
- Fix of MIDI2 playback on resume
* Others:
- Firewire-tascam control event fix
- Minor cleanups and fixes for sparc/dbri and pcmtest
-----BEGIN PGP SIGNATURE-----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=prTy
-----END PGP SIGNATURE-----
Merge tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Again a collection of small fixes, mostly for device-specific ones.
The only big LOC is about the removal of pretty old dead code in
ab8500 codec driver, while the rest all nice small changes.
Core / API:
- Fix race in deferred fasync state checks
- Fix UMP group filtering in sequencer
ASoC:
- cs35l56: fixes for driver cleanup and error paths
- tas2764/2770: workaround for bogus temperature readings
- wm_adsp: fixes for firmware unit tests
- amd-yc: more DMI quirks for laptops
- Minor fixes for fsl_xcvr and spacemit
HD-Audio:
- Mute LED and speaker quirks for HP, Lenovo, and Xiaomi laptops
USB-audio:
- New device-specific quirks (Motu, JBL, AlphaTheta, Razer)
- Fix of MIDI2 playback on resume
Others:
- Firewire-tascam control event fix
- Minor cleanups and fixes for sparc/dbri and pcmtest"
* tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ASoC: cs35l56: Destroy workqueue in probe error path
ASoC: cs35l56: Don't use devres to unregister component
ALSA: sparc/dbri: add missing fallthrough
ALSA: core: Serialize deferred fasync state checks
ALSA: hda/realtek: Add mute LED fixup for HP Pavilion 15-cs1xxx
ALSA: seq: Fix UMP group 16 filtering
ASoC: wm_adsp_fw_find_test: Clear searched_fw_files in find-by-index test
ASoC: wm_adsp_fw_find_test: Redirect wm_adsp_release_firmware_files()
ASoC: tas2770: Deal with bogus initial temperature value
ASoC: tas2764: Deal with bogus initial temperature register value
ALSA: usb-audio: add clock quirk for Motu 1248
ALSA: usb-audio: midi2: Restart output URBs on resume
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 15-fh0xxx
ALSA: usb-audio: Add quirk flags for JBL Pebbles
ALSA: firewire-tascam: Do not drop unread control events
ALSA: usb-audio: Add quirk flags for AlphaTheta EUPHONIA
ASoC: fsl_xcvr: Fix event generation for cached controls
ASoC: sdw_utils: avoid the SDCA companion function not supported failure
ASoC: amd: yc: Add HP OMEN Gaming Laptop 16-ap0xxx product line in quirk table
ASoC: cs35l56: Fix out-of-bounds in dev_err() in cs35l56_read_onchip_spkid()
...
Fixes
- hp-wmi: silence unknown board warning for 8D41
- lenovo/wmi-other: Fix uninitialized variable in fan RPM handling
- wmi: Check min_size also when ACPI does not return an out object
The following is an automated shortlog grouped by driver:
hp-wmi:
- silence unknown board warning for 8D41
lenovo: wmi-other:
- Fix uninitialized variable in lwmi_om_hwmon_write()
wmi:
- Fix unchecked min_size in wmidev_invoke_method()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCafx4pgAKCRBZrE9hU+XO
MerAAP9ALfDumabgsXGDibvB5700w4oXxKpf+NS/O0RGlKSpigD/bvo4xIut5Qow
xYZfEhYkRUyd0bSQwYh5i7fS8am7Nw8=
=Lais
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- Silence unknown board warning for 8D41 (hp-wmi)
- Fix uninitialized variable in fan RPM handling (lenovo/wmi-other)
- Check min_size also when ACPI does not return an out object (wmi)
* tag 'platform-drivers-x86-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lenovo: wmi-other: Fix uninitialized variable in lwmi_om_hwmon_write()
platform/x86: hp-wmi: silence unknown board warning for 8D41
platform/wmi: Fix unchecked min_size in wmidev_invoke_method()
The i.MX8M soc device is registered via platform_device_register_simple(),
so it is not associated with a Device Tree node and the imx8m_soc_driver
has no of_match_table.
As a result, device_get_match_data() always returns NULL when probing
the soc device.
Retrieve the match data directly from the machine compatible using
of_machine_get_match_data(imx8_soc_match), which provides the correct SoC
data.
Fixes: 2524b293a5 ("soc: imx8m: don't access of_root directly")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
priv->dev was never initialized after devm_kzalloc() allocates the
private data structure. When nvt_set_phy_intf_sel() is later invoked
via the phylink interface_select callback, it calls
nvt_gmac_get_delay(priv->dev, ...) which dereferences the NULL pointer.
Fix this by assigning priv->dev = dev immediately after allocation.
Fixes: 4d7c557f58 ("net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family")
Signed-off-by: Joey Lu <a0987203069@gmail.com>
Link: https://patch.msgid.link/20260506084614.192894-2-a0987203069@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a socket is bound to a wildcard address, tcp_v[46]_connect()
updates it with a non-wildcard address based on the route lookup.
After bhash2 was introduced in the cited commit, we must call
inet_bhash2_update_saddr() to update the bhash2 entry as well.
If inet_bhash2_update_saddr() fails, we must release the refcount
for dst by ip_route_connect() or ip6_dst_lookup_flow().
While tcp_v4_connect() calls ip_rt_put() in the error path,
tcp_v6_connect() does not call dst_release().
Let's call dst_release() when inet_bhash2_update_saddr() fails
in tcp_v6_connect().
Fixes: 28044fc1d4 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260506070443.1699879-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PHY counters can be lost if the PHY is reset during suspend. We
need to save the values into the shadow counters or the accounting
will be incorrect over multiple suspend and resume cycles.
Fixes: 820ee17b8d ("net: phy: broadcom: Add support code for reading PHY counters")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260505173926.2870069-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In smc_connect_work(), when the underlying TCP handshake fails, the error
code (rc) must be propagated to sk_err to ensure userspace can correctly
retrieve the error status via SO_ERROR. Currently, the code only handles
a restricted set of error codes (e.g., EPIPE, ECONNREFUSED). If other
errors occurs, such as EHOSTUNREACH, sk_err remains unset (zero).
This affects applications that rely on SO_ERROR to determine connect
outcome. For example, higher versions of Go's netpoller treats
SO_ERROR == 0 combined with a failed getpeername() as a spurious wakeup
and re-enters epoll_wait(). Under ET mode, no further edge will be
generated since the socket is already in a terminal state, causing the
connect to hang indefinitely or until a user-specified timeout, if one
is set.
Fixes: 50717a37db ("net/smc: nonblocking connect rework")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260506014105.27093-1-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SIOCATMARK reports whether the receive queue is at the urgent mark for
MSG_OOB.
In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.
SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),
so they should not support SIOCATMARK either.
Return -EOPNOTSUPP for non-stream sockets before checking the receive
queue.
Fixes: 314001f0bf ("af_unix: Add OOB support")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506140825.2987635-1-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
acpi_dev_get_first_match_dev() returns a refcounted ACPI device and
callers must balance it with acpi_dev_put().
cs35l41_hda_read_acpi() stores the returned ACPI device in
cs35l41->dacpi. That reference is normally released by the later
probe cleanup or the remove path, but the NULL-check on
physdev exits before either of those paths can run.
Drop the lookup reference before returning -ENODEV.
Fixes: c34b04cc61 ("ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()")
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Tested-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260428081238.GA1659932@chcpu16
acpi_dev_get_first_match_dev() returns a refcounted ACPI device and
callers are expected to balance it with acpi_dev_put().
When no companion is already attached, cs35l56_hda_read_acpi() looks
up an ACPI device and sets it with ACPI_COMPANION_SET(), but leaves
the lookup reference held.
ACPI_COMPANION_SET() does not take ownership of that reference, so
drop it with acpi_dev_put() after attaching the companion.
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Tested-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260428080139.GA1649104@chcpu16
XDP redirect into a veth device (via bpf_redirect()) calls
veth_xdp_xmit(), which enqueues frames into the peer's ptr_ring using
smp_processor_id() % peer->real_num_rx_queues
as the ring index. With an asymmetric veth pair where the peer has
fewer TX queues than RX queues, that index can exceed
peer->real_num_tx_queues.
veth_poll() then resolves peer_txq for the ring via:
peer_txq = peer_dev ? netdev_get_tx_queue(peer_dev, queue_idx) : NULL;
where queue_idx = rq->xdp_rxq.queue_index. When queue_idx exceeds
peer_dev->real_num_tx_queues this is an out-of-bounds (OOB) access
into the peer's netdev_queue array, triggering DEBUG_NET_WARN_ON_ONCE
in netdev_get_tx_queue().
The normal ndo_start_xmit path is not affected: the stack clamps
skb->queue_mapping via netdev_cap_txqueue() before invoking
ndo_start_xmit, so rxq in veth_xmit() never exceeds real_num_tx_queues.
Fix veth_poll() by clamping: only dereference peer_txq when queue_idx is
within bounds, otherwise set it to NULL. The out-of-range rings are fed
exclusively via XDP redirect (veth_xdp_xmit), never via ndo_start_xmit
(veth_xmit), so the peer txq was never stopped and there is nothing to
wake; NULL is the correct fallback.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260502071828.616C3C19425@smtp.kernel.org/
Fixes: dc82a33297 ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20260505132159.241305-2-hawk@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The HP Victus 16-r0xxx (board ID: 8BC2) has the same WMI as other Victus
S boards, but requires quirks for correctly switching thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8BC2 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Signed-off-by: Haichen Feng <2806891994@qq.com>
Link: https://patch.msgid.link/tencent_8E29805D8DC7B6005244C3433C62DD9DF606@qq.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
dma_resv_wait_timeout() returns a positive 'remaining jiffies' value
on success, 0 on timeout, and -errno on failure.
panfrost_ioctl_wait_bo() returns this 'long' result from an int-typed
ioctl handler, so positive values reach userspace as bogus errors.
Explicitly set ret to 0 on the success path.
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gyeyoung Baek <gye976@gmail.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/fe33f82fded7be1c18e2e0eb2db451d5a738cf39.1776581974.git.gye976@gmail.com
Signed-off-by: Steven Price <steven.price@arm.com>
dma_resv_wait_timeout() returns a positive 'remaining jiffies' value
on success, 0 on timeout, and -errno on failure.
rocket_ioctl_prep_bo() returns this 'long' result from an int-typed
ioctl handler, so positive values reach userspace as bogus errors.
Explicitly set ret to 0 on the success path.
Fixes: 525ad89dd9 ("accel/rocket: Add IOCTLs for synchronizing memory accesses")
Cc: stable@vger.kernel.org
Signed-off-by: Gyeyoung Baek <gye976@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/c0ebf83b345721701b22d8f5bc41c52c0ecf5e16.1776581974.git.gye976@gmail.com
Signed-off-by: Steven Price <steven.price@arm.com>
