arm allmodconfig fails to build with gcc:
In file included from sound/soc/ux500/ux500_msp_i2s.c:20:
sound/soc/ux500/ux500_msp_i2s.h:151:38: error: suggest parentheses
around arithmetic in operand of '^' [-Werror=parentheses]
sound/soc/ux500/ux500_msp_i2s.c:204:21: note: in expansion of macro
'MSP_TX_CLKPOL_BIT'
cc1: all warnings being treated as errors
The macros never parenthesized their argument:
#define MSP_TX_CLKPOL_BIT(n) ((n & TCKPOL_MASK) << TCKPOL_SHIFT)
That went unnoticed while every caller passed a plain variable, but
configure_protocol() now passes an XOR expression, which binds as
"a ^ (b & MASK)" rather than "(a ^ b) & MASK", and gcc rightly
complains.
No functional change: tx_clk_pol and rx_clk_pol only ever hold
MSP_FALLING_EDGE (0) or MSP_RISING_EDGE (1), and bclk_inverted is a
bool, so masking before or after the XOR gives the same 0/1 result.
Parenthesize the argument anyway - it fixes the build and stops the
macros from silently mis-evaluating a future composite argument.
Fixes: 9ccbacf5a0 ("ASoC: ux500: Validate MSP DAI configuration")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202609051547.G9SJp8UQ-lkp@intel.com/
Assisted-by: LLM
Signed-off-by: Sasha Levin <sashal@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260913173132.1172003-1-sashal@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DMA engine is configured for four-element bursts, but the MSP
driver never programs the FIFO watermark register and instead depends
on its previous or reset value. The DB8500 DMA request protocol requires
the peripheral watermark to match the DMA packet size.
Program four-element receive and transmit watermarks when configuring
the first direction, before enabling MSP DMA requests.
Fixes: 3592b7f69a ("ASoC: Ux500: Add MSP I2S-driver")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260902-ux500-msp-fixes-v2-9-4b60b002d55a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA can call the DAI prepare callback again after an XRUN without
first shutting down the stream. The MSP open helper rejects the second
call with -EBUSY because the direction remains configured.
Track successful playback and capture configurations at the DAI layer.
Make repeated prepare calls no-ops and only close directions which were
successfully prepared.
Fixes: 3592b7f69a ("ASoC: Ux500: Add MSP I2S-driver")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260902-ux500-msp-fixes-v2-8-4b60b002d55a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DB8500 PRCMU QoS interface consists of unconditional inline stubs,
so the MSP calls and cached constraint state have no effect. Device
power and clocks are already represented by the regulator, power-domain
and common-clock frameworks.
Remove the dead calls and their private state instead of pretending to
change the APE operating point.
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260902-ux500-msp-fixes-v2-7-4b60b002d55a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A bare devm_ioremap() neither reserves the register range nor preserves
the platform resource error. This permits another driver to claim the
same range and reports every mapping failure as an allocation failure.
Use the managed platform resource helper, retaining the resolved
resource only to derive the DMA register address.
Fixes: 3592b7f69a ("ASoC: Ux500: Add MSP I2S-driver")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260902-ux500-msp-fixes-v2-6-4b60b002d55a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The devicetree has described each MSP reset line since the PRCC reset
controller was added, but the driver never acquires or deasserts it. The
block can consequently remain inaccessible when firmware has left it in
reset.
Acquire the reset exclusively and keep it deasserted for the lifetime of
the bound device.
Fixes: 95f0404832 ("ARM: dts: ux500: Add reset lines to IP blocks")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260902-ux500-msp-fixes-v2-5-4b60b002d55a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Installing channel constraints from hw_params is too late to affect the
parameters being committed. The driver consequently accepts channel
counts which disagree with the I2S or TDM setup. It also silently
truncates out-of-range slot masks and accepts inverted bit clock formats
which prepare then rejects.
Validate the selected channel count directly, reject invalid masks
before changing cached TDM state, and implement all four standard clock
and frame inversion combinations. Use the requested format in
validation diagnostics.
Fixes: 3592b7f69a ("ASoC: Ux500: Add MSP I2S-driver")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260902-ux500-msp-fixes-v2-4-4b60b002d55a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
FRPER plus one is the number of bit clocks in a frame. It must follow
the configured slot count and width. The legacy rate-dependent
constants produce malformed frames; notably, a 16-slot, 16-bit frame
is programmed as 278 rather than 256 clocks.
Derive the frame period from the TDM geometry and use the real
functional clock rate. Validate that the requested bit clock has an
exact, representable divider, program SCKDIV as divider minus one, and
report the resulting bit clock using that same divisor.
Fixes: 3592b7f69a ("ASoC: Ux500: Add MSP I2S-driver")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260902-ux500-msp-fixes-v2-3-4b60b002d55a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The prepare callback continues with a partly initialized configuration
when format setup fails. Probe likewise tests the allocated pointer
instead of the return value, so an MMIO resource or mapping failure can
be ignored after allocation succeeds.
Return configuration failures from prepare and test the MSP
initialization result directly.
Fixes: 3592b7f69a ("ASoC: Ux500: Add MSP I2S-driver")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260902-ux500-msp-fixes-v2-2-4b60b002d55a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The trigger stop path drops the direction busy flag even though ALSA
still owns the stream until shutdown. A later trigger cannot reliably
restart it, shutdown may leave the block configured, and a second
stream may overwrite shared duplex configuration.
Keep configured and running directions as separate state. Program
shared settings only for the first direction, require a compatible
configuration for the other half of a duplex stream, and enable the
frame generator only while a provider stream is running. Also fix the
RX-disable direction test and preserve the other direction multichannel
setup.
Fixes: 3592b7f69a ("ASoC: Ux500: Add MSP I2S-driver")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260902-ux500-msp-fixes-v2-1-4b60b002d55a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the DBx500 PRCMU definitions into the DB8500 PRCMU
header and delete the wrapper header.
Convert users of simple PRCMU wrappers to call the DB8500 helpers
directly.
The dbx500-prcmu.h header was the result of an earlier attempt to
abstract several DBx5x SoC PRCMU units to use the same abstract
header. They are deleted from the kernel and this is not just
causing maintenance burden and build errors.
The stub code is using -ENOSYS in a way checkpatch complains about
so replace these with -EINVAL while we're at it.
Assisted-by: Codex:gpt-5-5
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606180825.vUSQntkJ-lkp@intel.com/
Signed-off-by: Linus Walleij <linusw@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/oe-kbuild-all/202606180825.vUSQntkJ-lkp@intel.com/
Link: https://patch.msgid.link/20260619-mfd-prcmu-merge-headers-v1-1-8ea0ee23b4d6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
It sets drvdata again in remove(), but it want to remove it.
void mop500_ab8500_remove(...)
{
struct mop500_ab8500_drvdata *drvdata = snd_soc_card_get_drvdata(card);
...
snd_soc_card_set_drvdata(card, drvdata);
} ^^^^^^^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cxwhi083.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
mop500.c will be updated when Card capsuling.
To makes its review easy, tidyup mop500_of_probe() parameter.
No functional change, but is preparation for cleanup driver.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ecgxi087.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877c1hzqcv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function ux500_msp_drv_probe, the 'int' type cast
in front of the PTR_ERR() macro is redundant, thus remove
it.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241107075440.2770-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all drivers below sound/soc to use .remove(), with the eventual
goal to drop struct platform_driver::remove_new(). As .remove() and
.remove_new() have the same prototypes, conversion is done by just
changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909151230.909818-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-33-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ledcqni4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/877cq5b0sx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-169-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-168-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
ux500_pcm_request_chan() is never called because the dma channels
are already set up from DT. Remove this, along with the
ux500_msp_dma_params structure.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230118161110.521504-4-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform data definition for ux500 sound devices was removed
six years ago after the DT conversion was completed, see commit
4b483ed0be ("ARM: ux500: cut some platform data").
Remove some leftover bits in the ASoC driver and just assume that
it always gets probed using DT.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230118161110.521504-3-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
This driver appears to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-31-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Currently the set_fmt callback always passes clock provider/consumer
with respect to the CODEC. This made sense when the framework was
directly broken down into platforms and CODECs. However, as things
are now broken down into components which can be connected as either
the CPU or CODEC side of a DAI link it simplifies things if each
side of the link is just told if it is provider or consumer of the
clocks. Making this change allows us to remove one of the last parts
of the ASoC core that needs to know if a driver is a CODEC driver,
where it flips the clock format specifier if a CODEC driver is used on
the CPU side of a DAI link, as well as just being conceptually more
consistent with componentisation.
The basic idea of this patch chain is to change the set_fmt callback
from specifying if the CODEC is provider/consumer into directly
specifying if the component is provider/consumer. To do this we add
some new defines, and then to preserve bisectability, the migration is
done by adding a new callback, converting over all existing CPU side
drivers, converting the core, and then finally reverting back to the
old callback.
Converting the platform drivers makes sense as the existing defines
are from the perspective of the CODEC and there are more CODEC drivers
than platform drivers.
Obviously a fair amount of this patch chain I was only able to build
test, so any testing that can be done would be greatly appreciated.
Now the core has been migrated across to the new direct clock
specification we can move the drivers back to the normal set_fmt
callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220519154318.2153729-54-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of updating the core to directly tell drivers if they are clock
provider or consumer update this CPU side driver to use the new direct
callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220519154318.2153729-27-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
clk_put() already checks the clk ptr using !clk and IS_ERR()
so there is no need to check it again before calling it.
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Link: https://lore.kernel.org/r/20220517033050.5191-1-hanyihao@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct mop500_ab8500_ops is only assigned to the ops field in the
snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210929094401.28086-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks like these have been unchecked since the driver's inception in 2012.
Fixes the following W=1 kernel build warning(s):
sound/soc/ux500/ux500_msp_i2s.c: In function ‘flush_fifo_rx’:
sound/soc/ux500/ux500_msp_i2s.c:398:6: warning: variable ‘reg_val_DR’
set but not used [-Wunused-but-set-variable]
sound/soc/ux500/ux500_msp_i2s.c: In function ‘flush_fifo_tx’:
sound/soc/ux500/ux500_msp_i2s.c:415:6: warning: variable
‘reg_val_TSTDR’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: zhong jiang <zhongjiang@huawei.com>
Cc: Ola Lilja <ola.o.lilja@stericsson.com>
Cc: Roger Nilsson <roger.xr.nilsson@stericsson.com>
Cc: Sandeep Kaushik <sandeep.kaushik@st.com>
Link: https://lore.kernel.org/r/20200709162328.259586-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are 2 issues here:
- if one of the 'of_parse_phandle' fails, calling 'mop500_of_node_put()'
is a no-op because the 'mop500_dai_links' structure has not been
initialized yet, so the referenced are not decremented
- The reference stored in 'mop500_dai_links[i].codecs' is refcounted
only once in the probe and must be decremented only once.
Fixes: 39013bd60e ("ASoC: Ux500: Dispose of device nodes correctly")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200512100705.246349-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 9ae6cdb184 ("ASoC: ux500: mop500: don't select unnecessary
Platform")
Current ALSA SoC avoid to add duplicate component to rtd,
and this driver was selecting CPU component as Platform component.
Thus, above patch removed Platform settings from this driver,
because it assumed these are same component.
But, some CPU driver is using generic DMAEngine, in such case, both
CPU component and Platform component will have same of_node/name.
In other words, there are some components which are different but
have same of_node/name.
In such case, Card driver definitely need to select Platform even
though it is same as CPU.
It is depends on CPU driver, but is difficult to know it from Card driver.
This patch reverts above patch.
Fixes: commit 9ae6cdb184 ("ASoC: ux500: mop500: don't select unnecessary Platform")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now supporting modern style dai_link
(= snd_soc_dai_link_component) for CPU/Codec/Platform.
This patch switches to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
