- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which onoly removed it from the core but failed to invoke
the actual device driver shutdown callback. This keeps the timer
active, which prevents power savings and causes pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is a
private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide better
information for analysis.
- The usual set of cleanups and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=A9Tu
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which only removed it from the core but failed to invoke
the actual device driver shutdown callback. This kept the timer
active, which prevented power savings and caused pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is
a private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide
better information for analysis.
- The usual set of cleanups and enhancements all over the place
* tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix spelling mistakes in comments
clocksource: Print durations for sync check unconditionally
LoongArch: Remove clockevents shutdown call on offlining
tick: Do not set device to detached state in tick_shutdown()
hrtimer: Reorder branches in hrtimer_clockid_to_base()
hrtimer: Remove hrtimer_clock_base:: Get_time
hrtimer: Use hrtimer_cb_get_time() helper
media: pwm-ir-tx: Avoid direct access to hrtimer clockbase
ALSA: hrtimer: Avoid direct access to hrtimer clockbase
lib: test_objpool: Avoid direct access to hrtimer clockbase
sched/core: Avoid direct access to hrtimer clockbase
timers/itimer: Avoid direct access to hrtimer clockbase
posix-timers: Avoid direct access to hrtimer clockbase
jiffies: Remove obsolete SHIFTED_HZ comment
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaNraNQAKCRA2KwveOeQk
u/DkAPwKPP5BSmVR2wkdpQaXIr3PGA+cbBYp34DMJNujZ9piIwD/WZ+HfGTLoERy
+2Q6HLj9hUdd+Rx3IZ8/w1QmnhUIUAU=
=AwV9
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One notable addition is the creation of the 'transitional' keyword for
kconfig so CONFIG renaming can go more smoothly.
This has been a long-standing deficiency, and with the renaming of
CONFIG_CFI_CLANG to CONFIG_CFI (since GCC will soon have KCFI
support), this came up again.
The breadth of the diffstat is mainly this renaming.
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI"
* tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/string_choices: Add str_assert_deassert() helper
kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
kconfig: Add transitional symbol attribute for migration support
kconfig: Fix BrokenPipeError warnings in selftests
gcc-plugins: Remove TODO_verify_il for GCC >= 16
stddef: Introduce __TRAILING_OVERLAP()
stddef: Remove token-pasting in TRAILING_OVERLAP()
lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
- Add a RISC-V optimized implementation of Poly1305. This code was
written by Andy Polyakov and contributed by Zhihang Shao.
- Migrate the MD5 code into lib/crypto/, and add KUnit tests for MD5.
Yes, it's still the 90s, and several kernel subsystems are still using
MD5 for legacy use cases. As long as that remains the case, it's
helpful to clean it up in the same way as I've been doing for other
algorithms. Later, I plan to convert most of these users of MD5 to use
the new MD5 library API instead of the generic crypto API.
- Simplify the organization of the ChaCha, Poly1305, BLAKE2s, and
Curve25519 code. Consolidate these into one module per algorithm,
and centralize the configuration and build process. This is the same
reorganization that has already been successful for SHA-1 and SHA-2.
- Remove the unused crypto_kpp API for Curve25519.
- Migrate the BLAKE2s and Curve25519 self-tests to KUnit.
- Always enable the architecture-optimized BLAKE2s code.
Due to interdependencies between test and non-test code, both are
included in this pull request. The broken-down diffstat is as follows:
Tests: 735 insertions(+), 1917 deletions(-)
RISC-V Poly1305: 877 insertions(+), 1 deletion(-)
Other: 1777 insertions(+), 3117 deletions(-)
Besides the new RISC-V code which is an addition, there are quite a
few simplifications due to the improved code organization for multiple
algorithms, the removal of the unused crypto_kpp API for Curve25519
and redundant tests, and the redesign of the BLAKE2s test.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaNgwUhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK3EnAP96hB1wD12DvIovGCmWnnlbzOt+CoK2
B5CW74eYEZiSbwD7BiKPDqvSmLzEBtbKmOSwRvxKuQ2uGGef3USFKYVCiw0=
=DY5R
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add a RISC-V optimized implementation of Poly1305. This code was
written by Andy Polyakov and contributed by Zhihang Shao.
- Migrate the MD5 code into lib/crypto/, and add KUnit tests for MD5.
Yes, it's still the 90s, and several kernel subsystems are still
using MD5 for legacy use cases. As long as that remains the case,
it's helpful to clean it up in the same way as I've been doing for
other algorithms.
Later, I plan to convert most of these users of MD5 to use the new
MD5 library API instead of the generic crypto API.
- Simplify the organization of the ChaCha, Poly1305, BLAKE2s, and
Curve25519 code.
Consolidate these into one module per algorithm, and centralize the
configuration and build process. This is the same reorganization that
has already been successful for SHA-1 and SHA-2.
- Remove the unused crypto_kpp API for Curve25519.
- Migrate the BLAKE2s and Curve25519 self-tests to KUnit.
- Always enable the architecture-optimized BLAKE2s code.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (38 commits)
crypto: md5 - Implement export_core() and import_core()
wireguard: kconfig: simplify crypto kconfig selections
lib/crypto: tests: Enable Curve25519 test when CRYPTO_SELFTESTS
lib/crypto: curve25519: Consolidate into single module
lib/crypto: curve25519: Move a couple functions out-of-line
lib/crypto: tests: Add Curve25519 benchmark
lib/crypto: tests: Migrate Curve25519 self-test to KUnit
crypto: curve25519 - Remove unused kpp support
crypto: testmgr - Remove curve25519 kpp tests
crypto: x86/curve25519 - Remove unused kpp support
crypto: powerpc/curve25519 - Remove unused kpp support
crypto: arm/curve25519 - Remove unused kpp support
crypto: hisilicon/hpre - Remove unused curve25519 kpp support
lib/crypto: tests: Add KUnit tests for BLAKE2s
lib/crypto: blake2s: Consolidate into single C translation unit
lib/crypto: blake2s: Move generic code into blake2s.c
lib/crypto: blake2s: Always enable arch-optimized BLAKE2s code
lib/crypto: blake2s: Remove obsolete self-test
lib/crypto: x86/blake2s: Reduce size of BLAKE2S_SIGMA2
lib/crypto: chacha: Consolidate into single module
...
The checkpatch.pl script currently warns against the use of strcpy,
strlcpy, and strncpy, recommending strscpy as a safer alternative.
However, these warnings are also triggered for code under tools/ and
scripts/, which are userspace utilities where strscpy is not available.
This patch suppresses these warnings for files in tools/ and scripts/.
Link: https://lkml.kernel.org/r/20250923171722.7798-1-suchitkarunakaran@gmail.com
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Segmentation fault ./scripts/mod/modpost -o vmlinux.symvers vmlinux.o
stops the kernel build. It comes when write_vmlinux_export_c_file()
tries to buf_printf alias->builtin_modname. malloc'ed memory is not
necessarily zeroed. NULL new->builtin_modname before adding to aliases.
Fixes: 5ab23c7923 ("modpost: Create modalias for builtin modules")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/4590a243-0a7e-b7e6-e2d3-cd1b41a12237@google.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Add a new Coccinelle script to identify places where PTR_ERR() is used
in print functions and suggest using the %pe format specifier instead.
For printing error pointers (i.e., a pointer for which IS_ERR() is true)
%pe will print a symbolic error name (e.g,. -EINVAL), opposed to the raw
errno (e.g,. -22) produced by PTR_ERR().
It also makes the code cleaner by saving a redundant call to PTR_ERR().
The script supports context, report, and org modes.
Example transformation:
printk("Error: %ld\n", PTR_ERR(ptr)); // Before
printk("Error: %pe\n", ptr); // After
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1758192227-701925-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During kernel option migrations (e.g. CONFIG_CFI_CLANG to CONFIG_CFI),
existing .config files need to maintain backward compatibility while
preventing deprecated options from appearing in newly generated
configurations. This is challenging with existing Kconfig mechanisms
because:
1. Simply removing old options breaks existing .config files.
2. Manually listing an option as "deprecated" leaves it needlessly
visible and still writes them to new .config files.
3. Using any method to remove visibility (.e.g no 'prompt', 'if n',
etc) prevents the option from being processed at all.
Add a "transitional" attribute that creates symbols which are:
- Processed during configuration (can influence other symbols' defaults)
- Hidden from user menus (no prompts appear)
- Omitted from newly written .config files (gets migrated)
- Restricted to only having help sections (no defaults, selects, etc)
making it truly just a "prior value pass-through" option.
The transitional syntax requires a type argument and prevents type
redefinition:
config NEW_OPTION
bool "New option"
default OLD_OPTION
config OLD_OPTION
bool
transitional
help
Transitional config for OLD_OPTION migration.
This allows seamless migration: olddefconfig processes existing
CONFIG_OLD_OPTION=y settings to enable CONFIG_NEW_OPTION=y, while
CONFIG_OLD_OPTION is omitted from newly generated .config files.
Added positive and negative testing via "testconfig" make target.
Co-developed-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250923213422.1105654-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
The kconfig test harness ("make testconfig") was generating BrokenPipeError
warnings when running interactive tests like oldaskconfig and oldconfig:
/usr/lib/python3/dist-packages/_pytest/unraisableexception.py:85: PytestUnraisableExceptionWarning: Exception ignored in: <_io.BufferedWriter name=12>
Traceback (most recent call last):
File "/srv/code/scripts/kconfig/tests/conftest.py", line 127, in oldaskconfig
return self._run_conf('--oldaskconfig', dot_config=dot_config,
~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
interactive=True, in_keys=in_keys)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
BrokenPipeError: [Errno 32] Broken pipe
The issue occurred when the test framework attempted to write to stdin
after the conf subprocess had already exited.
Wrap stdin write operations in try/except to catch BrokenPipeError and
stop sending more input. Add explicit flush() after writes so we can see
delivery errors immediately. Ignore BrokenPipeError when closing stdin.
Explicitly call wait() to validate subprocess termination.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250923213422.1105654-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Alexey Gladkov says:
The modules.builtin.modinfo file is used by userspace (kmod to be specific) to
get information about builtin modules. Among other information about the module,
information about module aliases is stored. This is very important to determine
that a particular modalias will be handled by a module that is inside the
kernel.
There are several mechanisms for creating modalias for modules:
The first is to explicitly specify the MODULE_ALIAS of the macro. In this case,
the aliases go into the '.modinfo' section of the module if it is compiled
separately or into vmlinux.o if it is builtin into the kernel.
The second is the use of MODULE_DEVICE_TABLE followed by the use of the
modpost utility. In this case, vmlinux.o no longer has this information and
does not get it into modules.builtin.modinfo.
For example:
$ modinfo pci:v00008086d0000A36Dsv00001043sd00008694bc0Csc03i30
modinfo: ERROR: Module pci:v00008086d0000A36Dsv00001043sd00008694bc0Csc03i30 not found.
$ modinfo xhci_pci
name: xhci_pci
filename: (builtin)
license: GPL
file: drivers/usb/host/xhci-pci
description: xHCI PCI Host Controller Driver
The builtin module is missing alias "pci:v*d*sv*sd*bc0Csc03i30*" which will be
generated by modpost if the module is built separately.
To fix this it is necessary to add the generated by modpost modalias to
modules.builtin.modinfo. Fortunately modpost already generates .vmlinux.export.c
for exported symbols. It is possible to add `.modinfo` for builtin modules and
modify the build system so that `.modinfo` section is extracted from the
intermediate vmlinux after modpost is executed.
Link: https://patch.msgid.link/cover.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Since .vmlinux.export.c is used to add generated by modpost modaliases
for builtin modules the .vmlinux.export.o is no longer optional and
should always be created. The generation of this file is not dependent
on CONFIG_MODULES.
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/0e63a9c7741fe8217e4fd7c60afcf057ffa2ef5a.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
For some modules, modalias is generated using the modpost utility and
the section is added to the module file.
When a module is added inside vmlinux, modpost does not generate
modalias for such modules and the information is lost.
As a result kmod (which uses modules.builtin.modinfo in userspace)
cannot determine that modalias is handled by a builtin kernel module.
$ cat /sys/devices/pci0000:00/0000:00:14.0/modalias
pci:v00008086d0000A36Dsv00001043sd00008694bc0Csc03i30
$ modinfo xhci_pci
name: xhci_pci
filename: (builtin)
license: GPL
file: drivers/usb/host/xhci-pci
description: xHCI PCI Host Controller Driver
Missing modalias "pci:v*d*sv*sd*bc0Csc03i30*" which will be generated by
modpost if the module is built separately.
To fix this it is necessary to generate the same modalias for vmlinux as
for the individual modules. Fortunately '.vmlinux.export.o' is already
generated from which '.modinfo' can be extracted in the same way as for
vmlinux.o.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/28d4da3b0e3fc8474142746bcf469e03752c3208.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
At this point, if a symbol is compiled as part of the kernel,
information about which module the symbol belongs to is lost.
To save this it is possible to add the module name to the alias name.
It's not very pretty, but it's possible for now.
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: rust-for-linux@vger.kernel.org
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/1a0d0bd87a4981d465b9ed21e14f4e78eaa03ded.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Currently, we assume all the data for modules.builtin.modinfo are
available in vmlinux.o.
This makes it impossible for modpost, which is invoked after vmlinux.o,
to add additional module info.
This commit moves the modules.builtin.modinfo rule after modpost.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/cdb3e5b9a739666b755cd0097dc34ab69c350e51.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Keep the .modinfo section during linking, but strip it from the final
vmlinux.
Adjust scripts/mksysmap to exclude modinfo symbols from kallsyms.
This change will allow the next commit to extract the .modinfo section
from the vmlinux.unstripped intermediate.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/aaf67c07447215463300fccaa758904bac42f992.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Generate the intermediate vmlinux.unstripped regardless of
CONFIG_ARCH_VMLINUX_NEEDS_RELOCS.
If CONFIG_ARCH_VMLINUX_NEEDS_RELOCS is unset, vmlinux.unstripped and
vmlinux are identiacal.
This simplifies the build rule, and allows to strip more sections
by adding them to remove-section-y.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/a48ca543fa2305bd17324f41606dcaed9b19f2d4.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
builtin_platform_driver() and others also use macro
platform_driver_register() which sets the .owner=THIS_MODULE, so extend
the cocci script to detect these as well.
Link: https://lkml.kernel.org/r/20250911184726.23154-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'struct spi_device_id' tables also need to be NULL terminated.
Link: https://lkml.kernel.org/r/20250911193354.56262-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 8a298579cd ("scripts: sphinx-build-wrapper: get rid of uapi/media Makefile")
accidentally added scripts/sphinx-build-wrapper, probably due
to some rebase issues.
The file was added on a separate patch series, at tools/docs,
and has other patches on the top of it, so drop this extra
version.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <d26137d908dc7813fafcded2c728ec837e4df073.1758361087.git.mchehab+huawei@kernel.org>
With lines having a code to decode, the alignment was not preserved for
the first line.
With this sample ...
[ 52.238089][ T55] RIP: 0010:__ip_queue_xmit+0x127c/0x1820
[ 52.238401][ T55] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 (...)
... the script was producing the following output:
[ 52.238089][ T55] RIP: 0010:__ip_queue_xmit (...)
[ 52.238401][ T55] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 (...)
That's because scripts/decodecode doesn't preserve the alignment. No need
to modify it, it is enough to give only the "Code: (...)" part to this
script, and print the prefix without modifications.
With the same sample, we now have:
[ 52.238089][ T55] RIP: 0010:__ip_queue_xmit (...)
[ 52.238401][ T55] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 (...)
Link: https://lkml.kernel.org/r/20250908-decode_strace_indent-v1-3-28e5e4758080@kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Carlos Llamas <cmllamas@google.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Elliot Berman <quic_eberman@quicinc.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With lines having a symbol to decode, the script was only trying to
preserve the alignment for the timestamps, but not the rest, nor when the
caller was set (CONFIG_PRINTK_CALLER=y).
With this sample ...
[ 52.080924] Call Trace:
[ 52.080926] <TASK>
[ 52.080931] dump_stack_lvl+0x6f/0xb0
... the script was producing the following output:
[ 52.080924] Call Trace:
[ 52.080926] <TASK>
[ 52.080931] dump_stack_lvl (arch/x86/include/asm/irqflags.h:19)
(dump_stack_lvl is no longer aligned with <TASK>: one missing space)
With this other sample ...
[ 52.080924][ T48] Call Trace:
[ 52.080926][ T48] <TASK>
[ 52.080931][ T48] dump_stack_lvl+0x6f/0xb0
... the script was producing the following output:
[ 52.080924][ T48] Call Trace:
[ 52.080926][ T48] <TASK>
[ 52.080931][ T48] dump_stack_lvl (arch/x86/include/asm/irqflags.h:19)
(the misalignment is clearer here)
That's because the script had a workaround for CONFIG_PRINTK_TIME=y only,
see the previous comment called "Format timestamps with tabs".
To always preserve spaces, they need to be recorded along the words. That
is what is now done with the new 'spaces' array.
Some notes:
- 'extglob' is needed only for this operation, and that's why it is set
in a dedicated subshell.
- 'read' is used with '-r' not to treat a <backslash> character in any
special way, e.g. when followed by a space.
- When a word is removed from the 'words' array, the corresponding space
needs to be removed from the 'spaces' array as well.
With the last sample, we now have:
[ 52.080924][ T48] Call Trace:
[ 52.080926][ T48] <TASK>
[ 52.080931][ T48] dump_stack_lvl (arch/x86/include/asm/irqflags.h:19)
(the alignment is preserved)
Link: https://lkml.kernel.org/r/20250908-decode_strace_indent-v1-2-28e5e4758080@kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Carlos Llamas <cmllamas@google.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Elliot Berman <quic_eberman@quicinc.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A few patches slightly improving the output generated by
decode_stacktrace.sh.
This patch (of 3):
Lines having a symbol to decode might not always have info after this
symbol. It means ${info_str} might not be set, but it will always be
printed after a space, causing trailing whitespaces.
That's a detail, but when the output is opened with an editor marking
these trailing whitespaces, that's a bit disturbing. It is easy to remove
them by printing this variable with a space only if it is set.
While at it, do the same with ${module} and print everything in one line.
Link: https://lkml.kernel.org/r/20250908-decode_strace_indent-v1-0-28e5e4758080@kernel.org
Link: https://lkml.kernel.org/r/20250908-decode_strace_indent-v1-1-28e5e4758080@kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Elliot Berman <quic_eberman@quicinc.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmjHMcoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5bwH/23w8iGB4hf7L/7Z
e7blX42Pe9EXA1uK62iWmwEjDvBuJ7TmVfXH09qYJ56fj6/rJEdpQwtBMd4ypL81
QA/7lq5UEl0apPzMN86J8EHCzmjNzv7o+UtEd4C/hPFEZHZJa5Hqj9CBglSwSCEn
fTkLk7Gl6s8SfzBQ/rXX6/ZChAB/RleVWabDlIQMDz++/+9DZ0aqphj+5bYSqysL
ROQOaj4LOICuLfrup9J61hKNBoF7Dv3sO20vc+Iic0XHRPZ6/lKCnHgCUsqVIOOQ
L4kDT7XKQg+n3ttjrMe84/8iHZdWtf8VMWrtniPT8e1YGYuMpavVplgIcFoFCoNm
Qa7NPDs=
=rZeT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaM3AYQAKCRAdayaRccAa
lkrsAQCfR0LymE8Hq+Vfk65DK4qZxigaXGTfg5n3xlPhTAh/iQEA02N0/ReHOOdH
nQde8709saIFE5axIMFvdWzbFPDtWwE=
=eIkf
-----END PGP SIGNATURE-----
Merge 6.17-rc6 into kbuild-next
Commit bd7c231212 ("pinctrl: meson: Fix typo in device table macro")
is needed in kbuild-next to avoid a build error with a future change.
While at it, address the conflict between commit 41f9049cff ("riscv:
Only allow LTO with CMODEL_MEDANY") and commit 6578a1ff6a ("riscv:
Remove version check for LTO_CLANG selects"), as reported by Stephen
Rothwell [1].
Link: https://lore.kernel.org/20250908134913.68778b7b@canb.auug.org.au/ [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
When running kernel-doc over multiple documents, it emits
one error message per file with is not what we want:
$ python3.6 scripts/kernel-doc.py . --none
...
Warning: ./include/trace/events/swiotlb.h:0 Python 3.7 or later is required for correct results
Warning: ./include/trace/events/iommu.h:0 Python 3.7 or later is required for correct results
Warning: ./include/trace/events/sock.h:0 Python 3.7 or later is required for correct results
...
Change the logic to warn it only once at the library:
$ python3.6 scripts/kernel-doc.py . --none
Warning: Python 3.7 or later is required for correct results
Warning: ./include/cxl/features.h:0 Python 3.7 or later is required for correct results
When running from command line, it warns twice, but that sounds
ok.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <68e54cf8b1201d1f683aad9bc710a99421910356.1758196090.git.mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
While cross-references are complex, as related ones can be on
different files, we can at least correlate the ones that belong
to the same file, adding a SEE ALSO section for them.
The result is not bad. See for instance:
$ tools/docs/sphinx-build-wrapper --sphinxdirs driver-api/media -- mandocs
$ man Documentation/output/driver-api/man/edac_pci_add_device.9
edac_pci_add_device(9) Kernel Hacker's Manual edac_pci_add_device(9)
NAME
edac_pci_add_device - Insert the 'edac_dev' structure into the
edac_pci global list and create sysfs entries associated with
edac_pci structure.
SYNOPSIS
int edac_pci_add_device (struct edac_pci_ctl_info *pci , int
edac_idx );
ARGUMENTS
pci pointer to the edac_device structure to be added to
the list
edac_idx A unique numeric identifier to be assigned to the
RETURN
0 on Success, or an error code on failure
SEE ALSO
edac_pci_alloc_ctl_info(9), edac_pci_free_ctl_info(9),
edac_pci_alloc_index(9), edac_pci_del_device(9), edac_pci_cre‐
ate_generic_ctl(9), edac_pci_release_generic_ctl(9),
edac_pci_create_sysfs(9), edac_pci_remove_sysfs(9)
August 2025 edac_pci_add_device edac_pci_add_device(9)
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <fba25efb41eadad17a54e6275a6191173d702f00.1758196090.git.mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Generating man files currently requires running a separate
script. The target also doesn't appear at the docs Makefile.
Add support for mandocs at the Makefile, adding the build
logic inside sphinx-build-wrapper, updating documentation
and dropping the ancillary script.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <3d248d724e7f3154f6e3a227e5923d7360201de9.1758196090.git.mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As we're reorganizing the place where doc scripts are located,
move this one to tools/docs.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <5e2c40d3aebfd67b7ac7817f548bd1fa4ff661a8.1758196090.git.mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As we'll be using the actual code inside sphinx-build-wrapper,
split the library from the executable, placing the exec at
the new place we've been using:
tools/docs
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <8adbc22df1d43b1c5a673799d2333cc429ffe9fc.1758196090.git.mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This script handle errors when trying to build translations
with make pdfdocs.
As part of our cleanup work to remove hacks from docs Makefile,
convert this to python, preparing it to be part of a library
to be called by sphinx-build-wrapper.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <d438fb01d2c00e2c2b4ac16f999d9a8ce848251b.1758196090.git.mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Currently, calling it without an argument shows an ugly error
message. Instead, print a message using pythondoc as description.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <64b0339eac54ac0f2b3de3667a7f4f5becb1c6ae.1758196090.git.mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
To make it easier to be re-used, move the JobserverExec class
to the library directory.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <6be7b161b6c005a9807162ebfd239af6a4e6fa47.1758196090.git.mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Convert the code inside jobserver-exec to a class and
properly document it.
Using a class allows reusing the jobserver logic on other
scripts.
While the main code remains unchanged, being compatible with
Python 2.6 and 3.0+, its coding style now follows a more
modern standard, having tabs replaced by a 4-spaces
indent, passing autopep8, black and pylint.
The code allows using a pythonic way to enter/exit a python
code, e.g. it now supports:
with JobserverExec() as jobserver:
jobserver.run(sys.argv[1:])
With the new code, the __exit__() function should ensure
that the jobserver slot will be closed at the end, even if
something bad happens somewhere.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <4749921b75d4e0bd85a25d4d94aa2c940fad084e.1758196090.git.mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The regex in this block of code makes no sense, and a quick test shows that
it never matches anything; simply delete the code.
No output changes.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add some more comments to dump_function(), add some comments, and trim out
an unneeded duplicate output_declaration() call.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The logic to handle macros is split in dump_function(); bring it all
together into a single place and add a comment saying what's going on.
Remove the unneeded is_define_proto variable, and tighten up the code
a bit.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The regexes for the parsing of function prototypes were more complicated
than they needed to be and difficult to understand -- at least, I spent a
fair amount of time bashing my head against them. Simplify them, and add
some documentation comments as well.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The is_define_proto case in dump_function() uses a regex with an empty
capture group - () - that has no use; just take it out.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The "name" regex in dump_function() includes both the tilde and colon
characters, but neither has any place in function prototypes. Remove the
characters, after which the regex simplifies to "\w+"
No output changes.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Both functions and structs are passed through a set of regex-based
transforms, but the two were structured differently, despite being the same
thing. Create a utility function to apply transformations and use it in
both cases.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Move these definitions to file level, where they are executed once, and
don't clutter the function itself.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The handling of untyped parameters involved a number of redundant tests;
restructure the code to remove them and be more compact.
No output changes.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The special case for __cacheline_group_begin/end() can be handled by just
adding another pattern to the struct_prefixes, eliminating the need for a
special case in push_parameter().
One change is that these annotations no longer appear in the rendered
output, just like all the other annotations that we clean out.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reduce coupling to implementation details of the formatting machinery by
avoiding direct use for `core`'s formatting traits and macros.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In order to support LKMM atomics in Rust, add rust_helper_* for atomic
APIs. These helpers ensure the implementation of LKMM atomics in Rust is
the same as in C. This could save the maintenance burden of having two
similar atomic implementations in asm.
Originally-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/all/20250719030827.61357-2-boqun.feng@gmail.com/
Dave Gilbert noticed that checkpatch warns about URL links over 75 chars
in length in commit logs.
Fix that.
Link: https://lkml.kernel.org/r/3529faaf84a5a9a96c5c0ec4183ae0ba6e97673c.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dave Gilbert <linux@treblig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e10 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The get_time() callbacks always need to match the bases clockid.
Instead of maintaining that association twice in hrtimer_bases,
use a helper.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-8-3ae822e5bfbd@linutronix.de
Toolchain and infrastructure:
- Two changes to prepare for the future Rust 1.91.0 release (expected
2025-10-30, currently in nightly): a target specification format
change and a renamed, soon-to-be-stabilized 'core' function.
-----BEGIN PGP SIGNATURE-----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=j/MW
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Two changes to prepare for the future Rust 1.91.0 release (expected
2025-10-30, currently in nightly): a target specification format
change and a renamed, soon-to-be-stabilized 'core' function.
* tag 'rust-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: support Rust >= 1.91.0 target spec
rust: use the new name Location::file_as_c_str() in Rust >= 1.91.0
Now that kernel-include directive supports parsing data
structs directly, we can finally get rid of the horrible hack
we added to support parsing media uAPI symbols.
As a side effect, Documentation/output doesn't have anymore
media auto-generated .rst files on it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/5dbb257a4b283697271c9c7b8f4713857e8191c8.1755872208.git.mchehab+huawei@kernel.org
Add a KUnit test suite for BLAKE2s. Most of the core test logic is in
the previously-added hash-test-template.h. This commit just adds the
actual KUnit suite, commits the generated test vectors to the tree so
that gen-hash-testvecs.py won't have to be run at build time, and adds a
few BLAKE2s-specific test cases.
This is the replacement for blake2s-selftest, which an earlier commit
removed. Improvements over blake2s-selftest include integration with
KUnit, more comprehensive test cases, and support for benchmarking.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
s390 and x86 have required LLVM 15 since
30d17fac6a ("scripts/min-tool-version.sh: raise minimum clang version to 15.0.0 for s390")
7861640aac ("x86/build: Raise the minimum LLVM version to 15.0.0")
respectively. This series bumps the rest of the kernel to 15.0.0 to
match, which allows for a decent number of clean ups.
On the distros front, we will only leave behind Debian Bookworm and
Ubuntu Jammy. In both of those cases, builders / developers can either
use the kernel.org toolchains or https://apt.llvm.org to get newer
versions that will run on those distributions, if they cannot upgrade.
archlinux:latest clang version 20.1.8
debian:oldoldstable-slim Debian clang version 11.0.1-2
debian:oldstable-slim Debian clang version 14.0.6
debian:stable-slim Debian clang version 19.1.7 (3+b1)
debian:testing-slim Debian clang version 19.1.7 (3+b1)
debian:unstable-slim Debian clang version 19.1.7 (3+b2)
fedora:41 clang version 19.1.7 (Fedora 19.1.7-4.fc41)
fedora:latest clang version 20.1.8 (Fedora 20.1.8-3.fc42)
fedora:rawhide clang version 20.1.8 (Fedora 20.1.8-3.fc43)
opensuse/leap:latest clang version 17.0.6
opensuse/tumbleweed:latest clang version 20.1.8
ubuntu:focal clang version 10.0.0-4ubuntu1
ubuntu:jammy Ubuntu clang version 14.0.0-1ubuntu1.1
ubuntu:noble Ubuntu clang version 18.1.3 (1ubuntu1)
ubuntu:latest Ubuntu clang version 18.1.3 (1ubuntu1)
ubuntu:rolling Ubuntu clang version 20.1.2 (0ubuntu1)
ubuntu:devel Ubuntu clang version 20.1.8 (0ubuntu1)
Link: https://lore.kernel.org/r/20250821-bump-min-llvm-ver-15-v2-0-635f3294e5f0@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
s390 and x86 have required LLVM 15 since
30d17fac6a ("scripts/min-tool-version.sh: raise minimum clang version to 15.0.0 for s390")
7861640aac ("x86/build: Raise the minimum LLVM version to 15.0.0")
respectively but most other architectures allow LLVM 13.0.1 or newer. In
accordance with the recent minimum supported version of GCC bump that
happened in
118c40b7b5 ("kbuild: require gcc-8 and binutils-2.30")
do the same for LLVM to 15.0.0.
Of the supported releases of Arch Linux, Debian, Fedora, and OpenSUSE
surveyed in evaluating this bump, this only leaves behind Debian
Bookworm (14.0.6) and Ubuntu Jammy (14.0.0). Debian Trixie has 19.1.7
and Ubuntu Noble has 18.1.3 (so there are viable upgrade paths) or users
can use apt.llvm.org, which provides even newer packages for those
distributions.
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/r/20250821-bump-min-llvm-ver-15-v2-1-635f3294e5f0@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
The uAPI stddef header includes compiler_types.h, a kernel-only
header, to make sure that kernel definitions of annotations
like __counted_by() take precedence.
There is a hack in scripts/headers_install.sh which strips includes
of compiler.h and compiler_types.h when installing uAPI headers.
While explicit handling makes sense for compiler.h, which is included
all over the uAPI, compiler_types.h is only included by stddef.h
(within the uAPI, obviously it's included in kernel code a lot).
Remove the stripping from scripts/headers_install.sh and wrap
the include of compiler_types.h in #ifdef __KERNEL__ instead.
This should be equivalent functionally, but is easier to understand
to a casual reader of the code. It also makes it easier to work
with kernel headers directly from under tools/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250825201828.2370083-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
GCC doesn't support "hwasan-kernel-mem-intrinsic-prefix", only
"asan-kernel-mem-intrinsic-prefix"[0], while LLVM supports both. This is
already taken into account when checking
"CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX", but not in the KASAN Makefile
adding those parameters when "CONFIG_KASAN_SW_TAGS" is enabled.
Replace the version check with "CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX",
which already validates that mem-intrinsic prefix parameter can be used,
and choose the correct name depending on compiler.
GCC 13 and above trigger "CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX" which
prevents `mem{cpy,move,set}()` being redefined in "mm/kasan/shadow.c"
since commit 36be5cba99 ("kasan: treat meminstrinsic as builtins in
uninstrumented files"), as we expect the compiler to prefix those calls
with `__(hw)asan_` instead. But as the option passed to GCC has been
incorrect, the compiler has not been emitting those prefixes, effectively
never calling the instrumented versions of `mem{cpy,move,set}()` with
"CONFIG_KASAN_SW_TAGS" enabled.
If "CONFIG_FORTIFY_SOURCES" is enabled, this issue would be mitigated as
it redefines `mem{cpy,move,set}()` and properly aliases the
`__underlying_mem*()` that will be called to the instrumented versions.
Link: https://lkml.kernel.org/r/20250821120735.156244-1-ada.coupriediaz@arm.com
Link: https://gcc.gnu.org/onlinedocs/gcc-13.4.0/gcc/Optimize-Options.html [0]
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Fixes: 36be5cba99 ("kasan: treat meminstrinsic as builtins in uninstrumented files")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The module export checks are looking for EXPORT_SYMBOL_GPL_FOR_MODULES()
which was renamed to EXPORT_SYMBOL_FOR_MODULES(). Update the checks.
Fixes: 6d3c3ca4c7 ("module: Rename EXPORT_SYMBOL_GPL_FOR_MODULES to EXPORT_SYMBOL_FOR_MODULES")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/r/20250825-export_modules_fix-v1-1-5c331e949538@suse.cz
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
There are some missing packages causing PDF build to fail on
Archlinux and add latexmk (from texlive-binextra package).
Yet, at least today, PDF builds are failing on a very late
stage, when trying to run xdvipdfmx:
$ xdvipdfmx -E -o "peci.pdf" "peci.xdv"
xdvipdfmx:fatal: Unrecognized paper format: # Simply write the paper name. See man 1 paper and "paper --no-size --all" for possible values
Despite its message, even using a very simple document like:
\def\sphinxdocclass{report}
\documentclass[a4paper,11pt,english]{sphinxmanual}
\begin{document}
Test
\end{document}
or even:
\def\sphinxdocclass{report}
\documentclass{sphinxmanual}
\begin{document}
Test
\end{document}
Is causing xdvipdfmx to complain about geometry. As Archlinux is
a rolling release distro, maybe I got it on a bad day. So, let's
fix it in the hope that soon enough someone would fix the issues
there.
Such broken scenario happens with those packages installed:
texlive-basic 2025.2-1
texlive-bin 2025.2-1
texlive-binextra 2025.2-1
texlive-fontsrecommended 2025.2-1
texlive-langchinese 2025.2-1
texlive-langcjk 2025.2-1
texlive-latex 2025.2-1
texlive-latexextra 2025.2-1
texlive-latexrecommended 2025.2-1
texlive-pictures 2025.2-1
texlive-xetex 2025.2-1
python-docutils 1:0.21.2-3
python-sphinx 8.2.3-1
python-sphinx-alabaster-theme 1.0.0-4
python-sphinxcontrib-applehelp 2.0.0-3
python-sphinxcontrib-devhelp 2.0.0-4
python-sphinxcontrib-htmlhelp 2.1.0-3
python-sphinxcontrib-jsmath 1.0.1-19
python-sphinxcontrib-qthelp 2.0.0-3
python-sphinxcontrib-serializinghtml 2.0.0-3
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/574d902f7691861e18339217f42409850ee58791.1755763127.git.mchehab+huawei@kernel.org
The dependeny list for OpenMandriva is wrong. Update it.
Yet, on my tests with OpenMandriva LX 4.3, the texlive packages are
broken: xelatex can't build anything there, as it lacks xelatex.sfm.
Yet, this could be a problem at the way I created the container.
Just in case, add a note about that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/669e759ba366328e5c8d5b14a591ba45a1f58176.1755763127.git.mchehab+huawei@kernel.org
The dependencies are outdated: both versions need texlive-dejavu
fonts. Also, for PDF generation, python311-Sphinx-latex is
required.
With that, all PDF files are now tuilt on both:
openSUSE Leap 15.6:
-------------------
PASSED: OS detection: openSUSE Leap 15.6
SKIPPED (Sphinx Sphinx 7.2.6): System packages
SKIPPED (Sphinx already installed either as venv or as native package): Sphinx on venv
SKIPPED (Sphinx already installed either as venv or as native package): Sphinx package
PASSED: Clean documentation: Build time: 0:00, return code: 0
PASSED: Build HTML documentation: Build time: 5:29, return code: 0
PASSED: Build PDF documentation: Build time: 13:45, return code: 0
openSUSE Tumbleweed:
--------------------
PASSED: OS detection: openSUSE Tumbleweed
SKIPPED (Sphinx Sphinx 8.2.3): System packages
SKIPPED (Sphinx already installed either as venv or as native package): Sphinx on venv
SKIPPED (Sphinx already installed either as venv or as native package): Sphinx package
PASSED: Clean documentation: Build time: 0:00, return code: 0
PASSED: Build HTML documentation: Build time: 4:33, return code: 0
PASSED: Build PDF documentation: Build time: 13:18, return code: 0
Summary
=======
PASSED - openSUSE Leap 15.6 (7 tests)
PASSED - openSUSE Tumbleweed (7 tests)
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/d78457376f9dfd24cb7ac3a32895c654412715f3.1755763127.git.mchehab+huawei@kernel.org
When qconf (xconfig) exits, it saves the current Option settings
for Show Name, Show Debug Info, and Show {Normal|All|Prompt} Options.
When it is next run, it loads these Option settings from its
config file. It correctly shows the flag settings for Show Name
and Show Debug Info, but it does not show which of the 3 Show...Options
is set. This can lead to confusing output, e.g., if the user thinks
that xconfig is in Show All Options mode but kconfig options which
have an unmet dependency are still being listed.
Add code to show the radio button for the current Show...Options
mode during startup so that it will reflect the current config
setting.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/r/20250812223502.1356426-1-rdunlap@infradead.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Use "%.*s" as the format specifier and supply the 'line' length 'len' to
mvwprintw() to format and print each line without making a temporary
copy. Remove the temporary buffer.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/r/20250811161650.37428-2-thorsten.blum@linux.dev
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reiserfs has been removed in 6.13, there are still some mentions in the
documentation about it and the tools. Remove those that don't seem
relevant anymore but keep references to reiserfs' r5 hash used by some
code.
There's one change in a script scripts/selinux/install_policy.sh but it
does not seem to be relevant either.
Signed-off-by: David Sterba <dsterba@suse.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250813100053.1291961-1-dsterba@suse.com
By the time stuff gets to create_parameter_list(), comments have long since
been stripped out, so we do not need to do it again here.
Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250814154035.328769-8-corbet@lwn.net
Simplify one gnarly regex and remove another altogether; add a comment
describing what is going on. There will be no #-substituted commas in this
case, so don't bother trying to put them back.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250814154035.328769-6-corbet@lwn.net
Make what the final code is doing a bit more clear to slow readers like me.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250814154035.328769-5-corbet@lwn.net
The logic for finding the name of the first in a series of variable names
is somewhat convoluted and, in the use of .extend(), actively buggy.
Document what is happening and simplify the logic.
Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250814154035.328769-4-corbet@lwn.net
Remove a redundant test and add a comment describing what the space removal
is doing.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250814154035.328769-3-corbet@lwn.net
create_parameter_list() tests an argument against the same regex twice, in
two different locations; remove the pointless extra tests and the
never-executed error cases that go with them.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250814154035.328769-2-corbet@lwn.net
The userprogs compiler and linker do not share the regular compiler flags.
Make sure they also fail on warnings with CONFIG_WERROR and W=e.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/r/20250814-kbuild-werror-v2-5-c01e596309d2@linutronix.de
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
The linker and assembler do not share the compiler flags.
Make sure they also fail on warnings with CONFIG_WERROR and W=e.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/r/20250814-kbuild-werror-v2-4-c01e596309d2@linutronix.de
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Following commit e88ca24319 ("kbuild: consolidate warning flags
in scripts/Makefile.extrawarn"), move `-Dwarnings` handling into
`Makefile.extrawarn` like C's `-Werror`.
No functional change intended.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/r/20250814-kbuild-werror-v2-3-c01e596309d2@linutronix.de
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
The two mechanisms have the same effect, unify their implementation.
Also avoid spurious rebuilds when switching between the two.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/r/20250814-kbuild-werror-v2-2-c01e596309d2@linutronix.de
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
CONFIG_WERROR sets KBUILD_CPPFLAGS while W=e would only set KBUILD_CFLAGS.
As a preparation to unify the two mechanism, align their effects.
While at it, add some alignment whitespace to prepare for later additions
to the list of changed variables.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/r/20250814-kbuild-werror-v2-1-c01e596309d2@linutronix.de
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
While nothing was really needed for virtualenv to work on most
distros, we had an issue with OpenMandriva.
While checking for it, it was noticed that there was no check if
python-virtualenv was installed.
This didn't solve the issues we faced there: at least with
the half-broken OpenMandriva Lx 4.0 docker container we used,
ensurepip was not available anywhere, causing venv to fail.
Add a distro-specific note about that.
Note: at least at the time we did our tests, OpenMandriva Lx 4.0
docker was shipped with wrong dnf repositories. Also, there
was no repos available for it anymore. So, we had to do some
hacks to upgrade to 4.3 before being able to run any tests.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/e3a0e5eccd50eb506846e3e8487a2d9124ef83e2.1754992972.git.mchehab+huawei@kernel.org
This program is somewhat complex. Add some docstring documentation,
explaining what each function and class is supposed to do.
Most of the focus here were to describe the ancillary functions used
to detect dependency needs.
The main SphinxDependencyChecker still requires a lot of care,
and probably need to be reorganized to clearly split the 4 types
of output it produces:
- Need to upgrade Python binary;
- System install needs;
- Virtual env install needs;
- Python install needs via system packages, to run Sphinx
natively.
Yet, for now, I'm happy of having it a lot better documented
than its Perl version.
-
While here, rename a parameter to have its usage better
documented.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/0cadab2cab3f78ae6d9f378e92a45125fbc5188f.1754992972.git.mchehab+huawei@kernel.org
The code at get_system_release() is actually a helper function,
independent from the actual Sphinx verification checker. Move
it to MissingCheckers class, where other checkers are present.
With that, the entire distro-specific handler logic, with
all its complexity is confined at SphinxDependencyChecker
class.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/4b42a85bbb6575bb34a58cf66019038c4afa1d5b.1754992972.git.mchehab+huawei@kernel.org
Better organize the code by moving the more generic methods
to MissingCheckers. Such class contain only binary and package
dependent missing checkers, but no distro-specific data or code.
All distro-specific data/code remains at SphinxDependencyChecker
class.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/11a252fe816bd7c85583d26ade0666eb2b481bf0.1754992972.git.mchehab+huawei@kernel.org
Better implement support for RHEL-based distros. While here,
get rid of a Fedora 28 support which cause troubles with
server distros. Also, get rid of yum, as RHEL8 already
suppords dnf, and this is not the minimal version we may
still support.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/4d1b27d3a381f011e150bb50176babba83af9e1a.1754992972.git.mchehab+huawei@kernel.org
When is_optional was added in Perl, it was a boolean. With
time, it ended becoming a sort of enum, which makes the
module harder to maintain.
Convert it to a enum-like class and add more options to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/42290a24f3b1dbea9ebe19747cf5622bb2f2cf5c.1754992972.git.mchehab+huawei@kernel.org
Currently, if Python < 3.7, package install will fail. That happens
with OpenSuse Leap and RHEL-based ver 8 distros.
OpenSuse allows installing Sphinx with Python 3.11, but RHEL-based
distros don't.
Prepare to recomend only venv on such cases. For now, just split
the recomendation on a new function that will check for a
paramtere to be called.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/4fb2181c960e89774309a833f80209a1a3ab10d2.1754992972.git.mchehab+huawei@kernel.org
It took me a lot of time, but I guess understand now what it
takes to install a package on Gentoo.
Handling dependencies is a nightmare, as Gentoo refuses to emerge
some packages if there's no package.use file describing them.
To make it worse, compilation flags shall also be present there
for some packages. If USE is not perfect, error/warning messages
like those are shown:
gnome-base/librsvg dev-texlive/texlive-xetex media-fonts/dejavu dev-python/pyyaml
...
!!! The following binary packages have been ignored due to non matching USE:
=media-gfx/graphviz-12.2.1-r1 X pdf -python_single_target_python3_13 qt6 svg
=media-gfx/graphviz-12.2.1-r1 X pdf python_single_target_python3_12 -python_single_target_python3_13 qt6 svg
=media-gfx/graphviz-12.2.1-r1 X pdf qt6 svg
=media-gfx/graphviz-12.2.1-r1 X pdf -python_single_target_python3_10 qt6 svg
=media-gfx/graphviz-12.2.1-r1 X pdf -python_single_target_python3_10 python_single_target_python3_12 -python_single_target_python3_13 qt6 svg
=media-fonts/noto-cjk-20190416 X
=app-text/texlive-core-2024-r1 X cjk -xetex
=app-text/texlive-core-2024-r1 X -xetex
=app-text/texlive-core-2024-r1 -xetex
=dev-libs/zziplib-0.13.79-r1 sdl
If emerge is allowed, it will simply ignore the above packages,
creating an incomplete installation, which will later fail when
one tries to build docs with images or build PDFs.
After the fix, command line commands to produce the needed USE
chain will be emitted, if they don't exist yet.
sudo su -c 'echo "media-gfx/graphviz" > /etc/portage/package.use/graphviz'
sudo su -c 'echo "media-gfx/imagemagick" > /etc/portage/package.use/imagemagick'
sudo su -c 'echo "media-libs/harfbuzz icu" > /etc/portage/package.use/media-libs'
sudo su -c 'echo "media-fonts/noto-cjk" > /etc/portage/package.use/media-fonts'
sudo su -c 'echo "app-text/texlive-core xetex" > /etc/portage/package.use/texlive'
sudo su -c 'echo "dev-libs/zziplib sdl" > /etc/portage/package.use/zziblib'
The new logic tries to be smart enough to detect for missing files
and missing arguments. Yet, as Gentoo seems to require users to
manage those package.use files by hand, the logic isn't perfect:
users may still need to verify for conflicts on different use
files.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/365fe5e7d568da932dcffde65f48f2c1256cb773.1754992972.git.mchehab+huawei@kernel.org
I forgot one f-string marker, with turned to be affecting 3
lines, because of cut-and-paste ;-)
Use the proper f-string marker to print Sphinx version at
the hint lines. Yet, we don't want to print as a tuple, so
call ver_str() for it.
Ideally, we would be placing it directly at the f-string, but
Python 3.6 f-string support was pretty much limited. Only
3.12 (PEP 701) makes it similar to Perl, allowing expressions
inside it. It sounds that function call itself was introduced
on 3.7.
As we explicitly want this one to run on 3.6, as latest Leap
comes with it, we can't use function calls on f-string.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/b0ad1795446b17a00ba2dd83f366e784253668e6.1754992972.git.mchehab+huawei@kernel.org
Rhel < 8.0 is not supported anymore. Drop support for it.
Rhel 8 is problematic: at least on the tests I did with a
docker repo, it didn't work, but it could be due to the issue
that it is actually different than a real One.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/62fe8ab243ad39f4964f1f74b965e43dc8f10e23.1754992972.git.mchehab+huawei@kernel.org
On openSUSE Leap 15.6, which is the current LTS version, has two
Sphinx packages. The normal one requires Python 3.6, which we
don't support anymore. However, it also has Python 3.11 with a
newer Sphinx version (7.2.6).
Suggest the newer version:
Detected OS: openSUSE Leap 15.6.
ERROR: at least python 3.7 is required to build the kernel docs
Warning: python version is not supported.
Warning: better to also install "convert".
Warning: better to also install "dot".
ERROR: please install "yaml", otherwise, build won't work.
You should run:
sudo zypper install --no-recommends ImageMagick graphviz python311-pyyaml
Sphinx needs to be installed either:
1) via pip/pypi with:
Currently not possible.
Please upgrade Python to a newer version and run this script again
2) As a package with:
sudo zypper install --no-recommends python311-Sphinx
Please note that Sphinx >= 3.0 will currently produce false-positive
warning when the same name is used for more than one type (functions,
structs, enums,...). This is known Sphinx bug. For more details, see:
https://github.com/sphinx-doc/sphinx/pull/8313
Can't build as 2 mandatory dependencies are missing
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/a1600e292b63f96f40163e350238812158ebd6c2.1754992972.git.mchehab+huawei@kernel.org
The scripts/sphinx-pre-install is used to detect problems at
the system environment and adjust it to build the Kernel
documentation. If the version is too old, it won't run, though.
Check if the version which started the script is valid. If not,
seek for a new one that is compatible with documentation
build.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/76627055a7f82f6a79296ddbd873fa5ac8f82a1d.1754992972.git.mchehab+huawei@kernel.org
The minimal version requirements we have is 3.9. Yet, the
script which detects it is this one. So, let's try supporting
an old version here, as we may want to suggest to upgrade
Python version to build the docs.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/39d6e27a047bc3cc8208ac5e11fe6ba44faff9c4.1754992972.git.mchehab+huawei@kernel.org
While we do need at least 3.6 for kernel-doc to work, and at least
3.7 for it to output functions and structs with parameters at the
right order, let the python binary be compatible with legacy
versions.
The rationale is that the Kernel build nowadays calls kernel-doc
with -none on some places. Better not to bail out when older
versions are found.
With that, potentially this will run with python 2.7 and 3.2+,
according with vermin:
$ vermin --no-tips -v ./scripts/kernel-doc
Detecting python files..
Analyzing using 24 processes..
2.7, 3.2 /new_devel/v4l/docs/scripts/kernel-doc
Minimum required versions: 2.7, 3.2
3.2 minimal requirement is due to argparse.
The minimal version I could check was version 3.4
(using anaconda). Anaconda doesn't support 3.2 or 3.3
anymore, and 3.2 doesn't even compile (I tested compiling
Python 3.2 on Fedora 42 and on Fedora 32 - no show).
With 3.4, the script didn't crash and emitted the right warning:
$ conda create -n py34 python=3.4
$ conda activate py34
python --version
Python 3.4.5
$ python ./scripts/kernel-doc --none include/media
Error: Python 3.6 or later is required by kernel-doc
$ conda deactivate
$ python --version
Python 3.13.5
$ python ./scripts/kernel-doc --none include/media
(no warnings and script ran properly)
Supporting 2.7 is out of scope, as it is EOL for 5 years, and
changing shebang to point to "python" instead of "python3"
would have a wider impact.
I did some extra checks about the differences from 3.2 and
3.4, and didn't find anything that would cause troubles:
grep -rE "yield from|asyncio|pathlib|async|await|enum" scripts/kernel-doc
Also, it doesn't use "@" operator. So, I'm confident that it
should run (producing the exit warning) since Python 3.2.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/87d55e76b0b1391cb7a83e3e965dbddb83fa9786.1753806485.git.mchehab+huawei@kernel.org
In my ongoing effort to truly understand our new kernel-doc, I continue to
make changes to improve the code, and to try to make the understanding task
easier for the next person. These patches focus on dump_struct() in
particular, which starts out at nearly 300 lines long - to much to fit into
my little brain anyway. Hopefully the result is easier to manage.
There are no changes in the rendered docs.
Add a couple more comments so that each phase of the process is
now clearly marked.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250807211639.47286-13-corbet@lwn.net
The last thing done in dump_struct() is to format the structure for
printing. That, too, is a separate activity; split it out into its own
function.
dump_struct() now fits in a single, full-hight editor screen.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250807211639.47286-12-corbet@lwn.net
Get rid of some redundant checks, and generally tighten up the code; no
logical change.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250807211639.47286-11-corbet@lwn.net
Add comments to rewrite_struct_members() describing what it is actually
doing, and reformat/comment the main struct_members regex so that it is
(more) comprehensible to humans.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250807211639.47286-10-corbet@lwn.net
...the variable in question was already strip()ed at the top of the loop.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250807211639.47286-9-corbet@lwn.net
Adopt a more Pythonic form for the main loop of this function, getting rid
of the "while True:" construction and making the actual loop invariant
explicit.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250807211639.47286-8-corbet@lwn.net
The massive loop that massages struct members shares no data with the rest
of dump_struct(); split it out into its own function. Code movement only,
no other changes.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250807211639.47286-7-corbet@lwn.net
Move the initial split of the prototype into its own function in the
ongoing effort to cut dump_struct() down to size.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250807211639.47286-6-corbet@lwn.net
dump_struct is one of the longest functions in the kdoc_parser class,
making it hard to read and reason about. Move the definition of the prefix
transformations out of the function, join them with the definition of
"attribute" (which was defined at the top of the file but only used here),
and reformat the code slightly for shorter line widths.
Just code movement in the end.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250807211639.47286-5-corbet@lwn.net
A lot of the regular expressions in this file have extraneous backslashes
that may have been needed in Perl, but aren't helpful here. Take them out
to reduce slightly the visual noise.
Escaping of (){}[] has been left in place, even when unnecessary, for
visual clarity.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250807211639.47286-4-corbet@lwn.net
The complex struct_members regex was defined far from its use; bring the
two together. Remove some extraneous backslashes while making the move.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250807211639.47286-3-corbet@lwn.net
There were two locations duplicating the logic of stripping private members
and associated comments; coalesce them into one, and add some comments
describing what's going on.
Output change: we now no longer add extraneous white space around macro
definitions.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250807211639.47286-2-corbet@lwn.net
This adds the following commits from upstream:
52f07dcca47c dtc: Add informative error for stray identifier
9cabae6b0351 checks: Fix detection of 'i2c-bus' node
605dc044c3fe New helper to add markers
7da5d106c740 fdtput: Fix documentation about existing nodes
53c63dd421d7 dtdiff: Use input format dtb for dtbo files
84d9dd2fcbc8 dtc: Add data_insert_data function
97011d1f4e98 meson: use override_find_program/override_dependency
b841391bbd08 srcpos: Define srcpos_free
e0b7749c26a9 Add alloc_marker
ecb21febfdd3 meson: port python bindings to build natively via meson and meson-python
7ebfcac8520e Makefile: deprecate in favor of Meson
f4c53f4ebf78 Use __ASSEMBLER__ instead of __ASSEMBLY__
205fbef17b7b Fix some typos
da85f91931e5 Remove duplicated words in documentation and comments
dd1b3e532d22 meson: support building libfdt without static library
1ccd232709d4 meson: don't build test programs by default
ce1d8588880a tests: When building .so from -O asm output mark as non-executable stack
915daadbb62d Start with empty __local_fixups__ and __fixups__ nodes
4ea851f5a44d Let get_subnode() not return deleted nodes
175d2a564c47 Use build_root_node() instead of open-coding it
18f4f305fdd7 build: fix -Dtools=false build
267efc7d4694 checks: Warn about missing #address-cells for interrupt parents
755db115355b libfdt: Add fdt_setprop_namelen_string()
bdca8612009e libfdt: Add fdt_setprop_namelen()
0f69cedc08fc libfdt_internal: fdt_find_string_len_()
56b2b30c5bd0 libfdt: add fdt_get_property_namelen_w()
1e8c5f60e127 Add clang-format config
6f183c7d9246 checks: Relax avoid_unnecessary_addr_size check to allow child ranges properties
66c7d0e6f4f3 tests/sw_tree1.c: fix unitialized saveptr
9a969f3b70b0 pylibfdt/libfdt.i: fix backwards compatibility of return values
4292b072a23a .github/workflows: update ubuntu runner to supported version
1c745a9bd169 libfdt: Remove fdt parameter from overlay_fixup_one_phandle
b3bbee6b1242 libfdt: Move the SBOM authors section
d1656730abfb Add a SBOM file in CycloneDX format
b75515af4576 libfdt: Remove extra semi-colons outside functions
2d10aa2afe35 Bump version to v1.7.2
48795c82bdb6 pylibfdt: Don't emit warnings from swig generate C code
838f11e830e3 fdtoverlay: provide better error message for missing `/__symbols__`
d1e2384185c5 pylibfdt/libfdt.i: Use SWIG_AppendOutput
18aa49a9f68d Escape spaces in depfile with backslashes.
f9968fa06921 libfdt.h: whitespace consistency fixups
9b5f65fb3d8d libfdt.h: typo and consistency fixes
99031e3a4a6e Bump version to v1.7.1
3d5e376925fd setup: Move setting of srcdir down to the bottom
e277553b9880 setup: Collect top-level code together
7e5a88984081 setup: Move version and full_description into a function
78b6a85c113b Tidy up some pylint warnings
3501d373f0a2 Require Python 3
The added include of string.h in libfdt_internal.h breaks the kernel
overriding libfdt_env.h with its own string functions, so it is dropped.
An upstream fix is pending.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
- Fix a shortcut key issue in menuconfig
- Fix missing rebuild of kheaders
- Sort the symbol dump generated by gendwarfsyms
- Support zboot extraction in scripts/extract-vmlinux
- Migrate gconfig to GTK 3
- Add TAR variable to allow overriding the default tar command
- Hand over Kbuild maintainership
-----BEGIN PGP SIGNATURE-----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=MtyJ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"This is the last pull request from me.
I'm grateful to have been able to continue as a maintainer for eight
years. From the next cycle, Nathan and Nicolas will maintain Kbuild.
- Fix a shortcut key issue in menuconfig
- Fix missing rebuild of kheaders
- Sort the symbol dump generated by gendwarfsyms
- Support zboot extraction in scripts/extract-vmlinux
- Migrate gconfig to GTK 3
- Add TAR variable to allow overriding the default tar command
- Hand over Kbuild maintainership"
* tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (92 commits)
MAINTAINERS: hand over Kbuild maintenance
kheaders: make it possible to override TAR
kbuild: userprogs: use correct linker when mixing clang and GNU ld
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c
kconfig: lxdialog: replace strcpy with snprintf in print_autowrap
kconfig: gconf: refactor text_insert_help()
kconfig: gconf: remove unneeded variable in text_insert_msg
kconfig: gconf: use hyphens in signals
kconfig: gconf: replace GtkImageMenuItem with GtkMenuItem
kconfig: gconf: Fix Back button behavior
kconfig: gconf: fix single view to display dependent symbols correctly
scripts: add zboot support to extract-vmlinux
gendwarfksyms: order -T symtypes output by name
gendwarfksyms: use preferred form of sizeof for allocation
kconfig: qconf: confine {begin,end}Group to constructor and destructor
kconfig: qconf: fix ConfigList::updateListAllforAll()
kconfig: add a function to dump all menu entries in a tree-like format
kconfig: gconf: show GTK version in About dialog
kconfig: gconf: replace GtkHPaned and GtkVPaned with GtkPaned
kconfig: gconf: replace GdkColor with GdkRGBA
...
strcpy() performs no bounds checking and can lead to buffer overflows if
the input string exceeds the destination buffer size. This patch replaces
it with strncpy(), and null terminates the input string.
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Reviewed-by: Nicolas Schier <nicolas.schier@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
strcpy() does not perform bounds checking and can lead to buffer overflows
if the source string exceeds the destination buffer size. In
print_autowrap(), replace strcpy() with snprintf() to safely copy the
prompt string into the fixed-size tempstr buffer.
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- The 2 patch series "squashfs: Remove page->mapping references" from
Matthew Wilcox gets us closer to being able to remove page->mapping.
- The 5 patch series "relayfs: misc changes" from Jason Xing does some
maintenance and minor feature addition work in relayfs.
- The 5 patch series "kdump: crashkernel reservation from CMA" from Jiri
Bohac switches us from static preallocation of the kdump crashkernel's
working memory over to dynamic allocation. So the difficulty of
a-priori estimation of the second kernel's needs is removed and the
first kernel obtains extra memory.
- The 5 patch series "generalize panic_print's dump function to be used
by other kernel parts" from Feng Tang implements some consolidation and
rationalizatio of the various ways in which a faiing kernel splats
information at the operator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaI+82gAKCRDdBJ7gKXxA
jj4JAP9xb+w9DrBY6sa+7KTPIb+aTqQ7Zw3o9O2m+riKQJv6jAEA6aEwRnDA0451
fDT5IqVlCWGvnVikdZHSnvhdD7TGsQ0=
=rT71
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and 'ref_as_ptr'.
These are intended to avoid type casts with the 'as' operator, which
are quite powerful, into restricted variants that are less powerful
and thus should help to avoid mistakes.
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle.
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is followed
as for the static branch code in order to share the assembly between
both C and Rust. This required a few rearrangements on C arch headers
-- the existing C macros should still generate the same outputs, thus
no functional change expected there.
- 'workqueue' module: add delayed work items, including a 'DelayedWork'
struct, a 'impl_has_delayed_work!' macro and an 'enqueue_delayed'
method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
static_assert!(0b00010000 == bit_u8(4));
static_assert!(0b00011110 == genmask_u8(1..=4));
assert!(checked_bit_u32(u32::BITS).is_none());
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which reads
NUL-terminated strings from userspace into a '&CStr'.
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C, to
minimize mistakes handling userspace pointers, including mixing them
up with integers and leaking them via the 'Debug' trait. Add it to
the prelude, too.
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and some
other cleanups.
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances.
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature.
- Convert the 'read!()' and 'write!()' macros to return a 'Result'.
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'.
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add the
corresponding type invariants.
- Implement 'CoherentAllocation::dma_handle_with_offset()'.
- 'time' module:
- Make 'Instant' generic over clock source. This allows the compiler
to assert that arithmetic expressions involving the 'Instant' use
'Instants' based on the same clock source.
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers take a
'Duration' or an 'Instant' when setting the expiry time, depending
on the timer mode. With this change, the compiler can check the
type matches the timer mode.
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending on
the requested sleep time.
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps.
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types.
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'.
- 'list' module: remove 'OFFSET' constants, allowing to remove pointer
arithmetic; now 'impl_list_item!' invokes 'impl_has_list_links!' or
'impl_has_list_links_self_ptr!'. Other simplifications too.
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null.
Remove the 'Either<L, R>' type as well. It is unused, and we want to
encourage the use of custom enums for concrete use cases.
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs.
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'.
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it.
- 'rbtree' module: add 'is_empty' method.
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which we
want to reduce or eventually remove. Also fix a safety comment in
'static_lock_class'.
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are now
(pin-)initializers.
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'.
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'.
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for '"Rust"'
and '"C"' ABIs and up to 20 arguments.
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'.
- Renamed 'zeroed()' to 'init_zeroed()'.
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two '-next'
branches in upstream and the kernel.
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone).
And a few other cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=5Wt9
-----END PGP SIGNATURE-----
Merge tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and
'ref_as_ptr'
These are intended to avoid type casts with the 'as' operator,
which are quite powerful, into restricted variants that are less
powerful and thus should help to avoid mistakes
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is
followed as for the static branch code in order to share the
assembly between both C and Rust
This required a few rearrangements on C arch headers -- the
existing C macros should still generate the same outputs, thus no
functional change expected there
- 'workqueue' module: add delayed work items, including a
'DelayedWork' struct, a 'impl_has_delayed_work!' macro and an
'enqueue_delayed' method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
static_assert!(0b00010000 == bit_u8(4));
static_assert!(0b00011110 == genmask_u8(1..=4));
assert!(checked_bit_u32(u32::BITS).is_none());
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which
reads NUL-terminated strings from userspace into a '&CStr'
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C,
to minimize mistakes handling userspace pointers, including mixing
them up with integers and leaking them via the 'Debug' trait. Add
it to the prelude, too
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and
some other cleanups
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature
- Convert the 'read!()' and 'write!()' macros to return a 'Result'
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add
the corresponding type invariants
- Implement 'CoherentAllocation::dma_handle_with_offset()'
- 'time' module:
- Make 'Instant' generic over clock source. This allows the
compiler to assert that arithmetic expressions involving the
'Instant' use 'Instants' based on the same clock source
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers
take a 'Duration' or an 'Instant' when setting the expiry time,
depending on the timer mode. With this change, the compiler can
check the type matches the timer mode
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending
on the requested sleep time
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'
- 'list' module: remove 'OFFSET' constants, allowing to remove
pointer arithmetic; now 'impl_list_item!' invokes
'impl_has_list_links!' or 'impl_has_list_links_self_ptr!'. Other
simplifications too
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null
Remove the 'Either<L, R>' type as well. It is unused, and we want
to encourage the use of custom enums for concrete use cases
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it
- 'rbtree' module: add 'is_empty' method
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which
we want to reduce or eventually remove. Also fix a safety comment
in 'static_lock_class'
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are
now (pin-)initializers
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for
'"Rust"' and '"C"' ABIs and up to 20 arguments
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'
- Renamed 'zeroed()' to 'init_zeroed()'
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two
'-next' branches in upstream and the kernel
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone)
And a few other cleanups and improvements"
* tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (76 commits)
rust: Add warn_on macro
arm64/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
riscv/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
rust: kernel: move ARef and AlwaysRefCounted to sync::aref
rust: sync: fix safety comment for `static_lock_class`
rust: types: remove `Either<L, R>`
rust: kernel: use `core::ffi::CStr` method names
rust: str: add `CStr` methods matching `core::ffi::CStr`
rust: str: remove unnecessary qualification
rust: use `kernel::{fmt,prelude::fmt!}`
rust: kernel: add `fmt` module
rust: kernel: remove `fmt!`, fix clippy::uninlined-format-args
scripts: rust: emit path candidates in panic message
scripts: rust: replace length checks with match
rust: list: remove nonexistent generic parameter in link
rust: bits: add support for bits/genmask macros
rust: list: remove OFFSET constants
rust: list: add `impl_list_item!` examples
rust: list: use fully qualified path
...
This typo was not listed in scripts/spelling.txt, thus it was more
difficult to detect. Add it for convenience.
Link: https://lkml.kernel.org/r/02153C05ED7B49B7+20250722073431.21983-8-wangyuli@uniontech.com
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
- The Perl kernel-doc script was added to 2.3.52pre1 just after the turn of
the millennium. Over the following 25 years, it accumulated a vast
amount of cruft, all in a language few people want to deal with anymore.
Mauro's Python replacement in 6.16 faithfully reproduced all of the cruft
in the hope of avoiding regressions. Now that we have a more reasonable
code base, though, we can work on cleaning it up; many of the changes
this time around are toward that end.
- A reorganization of the ext4 docs into the usual TOC format.
- Various Chinese translations and updates.
- A new script from Mauro to help with docs-build testing.
- A new document for linked lists
- A sweep through MAINTAINERS fixing broken GitHub git:// repository links.
...and lots of fixes and updates.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmiHe3oPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y+EIH/0dMribAlWSrfS1sdisfkVp+nHh+DB6EA+uX
XqbJvQrukze6GvvOI2L6+3fDp+5CBtBRRSkzsNIXfFQo6p/jEbTmD/JILO0LcyDT
9iFX+W30nRetu1SqkiTGjLXgu+tF0gUE6zVnI7Lx7H10PUnUPkFbmMuwmOcOV/lC
7Lml+G1FTByGE6gDjTTyTJOqBf37uLJq33N2YnPK0SHm4DiSsWGvINxGbXrrpR5Z
7ORA6SnaIxFuy60SxL9pEH92OLS/kHRw74P/DT1dkg9BSdy4TRLM30QkZFGoiG2B
OOnnT/JJz80BzI1ctzpcwGRWfD+i8DDvujp8+aLxXYbl5N7WYw0=
=sji4
-----END PGP SIGNATURE-----
Merge tag 'docs-6.17' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle for docs, especially the build
system:
- The Perl kernel-doc script was added to 2.3.52pre1 just after the
turn of the millennium. Over the following 25 years, it accumulated
a vast amount of cruft, all in a language few people want to deal
with anymore. Mauro's Python replacement in 6.16 faithfully
reproduced all of the cruft in the hope of avoiding regressions.
Now that we have a more reasonable code base, though, we can work
on cleaning it up; many of the changes this time around are toward
that end.
- A reorganization of the ext4 docs into the usual TOC format.
- Various Chinese translations and updates.
- A new script from Mauro to help with docs-build testing.
- A new document for linked lists
- A sweep through MAINTAINERS fixing broken GitHub git:// repository
links.
...and lots of fixes and updates"
* tag 'docs-6.17' of git://git.lwn.net/linux: (147 commits)
scripts: add origin commit identification based on specific patterns
sphinx: kernel_abi: fix performance regression with O=<dir>
Documentation: core-api: entry: Replace deprecated KVM entry/exit functions
docs: fault-injection: drop reference to md-faulty
docs: document linked lists
scripts: kdoc: make it backward-compatible with Python 3.7
docs: kernel-doc: emit warnings for ancient versions of Python
Documentation/rtla: Describe exit status
Documentation/rtla: Add include common_appendix.rst
docs: kernel: Clarify printk_ratelimit_burst reset behavior
Documentation: ioctl-number: Don't repeat macro names
Documentation: ioctl-number: Shorten macros table
Documentation: ioctl-number: Correct full path to papr-physical-attestation.h
Documentation: ioctl-number: Extend "Include File" column width
Documentation: ioctl-number: Fix linuxppc-dev mailto link
overlayfs.rst: fix typos
docs: kdoc: emit a warning for ancient versions of Python
docs: kdoc: clean up check_sections()
docs: kdoc: directly access the always-there KdocItem fields
docs: kdoc: straighten up dump_declaration()
...
- Keep track of when fgraph_ops are registered or not
Keep accounting of when fgraph_ops are registered as if a fgraph_ops is
registered twice it can mess up the accounting and it will not work as
expected later. Trigger a warning if something registers it twice as to
catch bugs before they are found by things just not working as expected.
- Make DYNAMIC_FTRACE always enabled for architectures that support it
As static ftrace (where all functions are always traced) is very expensive
and only exists to help architectures support ftrace, do not make it an
option. As soon as an architecture supports DYNAMIC_FTRACE make it use it.
This simplifies the code.
- Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant
with the HAVE_DYNAMIC_FTRACE.
- Make pid_ptr string size match the comment
In print_graph_proc() the pid_ptr string is of size 11, but the comment says
/* sign + log10(MAX_INT) + '\0' */ which is actually 12.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIkVkRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmdxAPsGcyT/gnyX/wf70cI63QoODrlRAd7M
tg3R0J0H41U05QD/apttbA9GSdZ8bDLLSFAXTJgr8f4GvYvbUsmu2sMBBA8=
=gd9V
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Keep track of when fgraph_ops are registered or not
Keep accounting of when fgraph_ops are registered as if a fgraph_ops
is registered twice it can mess up the accounting and it will not
work as expected later. Trigger a warning if something registers it
twice as to catch bugs before they are found by things just not
working as expected.
- Make DYNAMIC_FTRACE always enabled for architectures that support it
As static ftrace (where all functions are always traced) is very
expensive and only exists to help architectures support ftrace, do
not make it an option. As soon as an architecture supports
DYNAMIC_FTRACE make it use it. This simplifies the code.
- Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it
redundant with the HAVE_DYNAMIC_FTRACE.
- Make pid_ptr string size match the comment
In print_graph_proc() the pid_ptr string is of size 11, but the
comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12.
* tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
ftrace: Make DYNAMIC_FTRACE always enabled for architectures that support it
fgraph: Keep track of when fgraph_ops are registered or not
fgraph: Make pid_str size match the comment
This pull request contains the following branches:
rcu-exp.23.07.2025
- Protect against early RCU exp quiescent state reporting during exp
grace period initialization.
- Remove superfluous barrier in task unblock path.
- Remove the CPU online quiescent state report optimization, which is
error prone for certain scenarios.
- Add warning for unexpected pending requested expedited quiescent
state on dying CPU.
rcu.22.07.2025
- Robustify rcu_is_cpu_rrupt_from_idle() by using more accurate
indicators of the actual context tracking state of a CPU.
- Handle ->defer_qs_iw_pending field data race.
- Enable rcu_normal_wake_from_gp by default on systems with <= 16 CPUs.
- Fix lockup in rcu_read_unlock() due to recursive irq_exit() calls.
- Refactor expedited handling condition in rcu_read_unlock_special().
- Documentation updates for hotplug and GP init scan ordering,
separation of rcu_state and rnp's gp_seq states, quiescent state
reporting for offline CPUs.
torture-scripts.16.07.2025
- Cleanup and improve scripts : remove superfluous warnings for disabled
tests; better handling of kvm.sh --kconfig arg; suppress some confusing
diagnostics; tolerate bad kvm.sh args; add new diagnostic for build
output; fail allmodconfig testing on warnings.
- Include RCU_TORTURE_TEST_CHK_RDR_STATE config for KCSAN kernels.
- Disable default RCU-tasks and clocksource-wdog testing on arm64.
- Add EXPERT Kconfig option for arm64 KCSAN runs.
- Remove SRCU-lite testing.
rcutorture.16.07.2025
- Start torture writer threads creation after reader threads to handle
race in SRCU-P scenario.
- Add SRCU down_read()/up_read() test.
- Add diagnostics for delayed SRCU up_read(), unmatched up_read(), print
number of up/down readers and the number of such readers which
migrated to other CPU.
- Ignore certain unsupported configurations for trivial RCU test.
- Fix splats in RT kernels due to inaccurate checks for BH-disabled
context.
- Enable checks and logs to capture intentionally exercised unexpected
scenarios (too short readers) for BUSTED test.
- Remove SRCU-lite testing.
srcu.19.07.2025
- Expedite SRCU-fast grace periods.
- Remove SRCU-lite implementation.
- Add guards for SRCU-fast readers.
rcu.nocb.18.07.2025
- Dump NOCB group leader state on stall detection.
- Robustify nocb_cb_kthread pointer accesses.
- Fix delayed execution of hurry callbacks when LAZY_RCU is enabled.
refscale.07.07.2025
- Fix multiplication overflow in "loops" and "nreaders" calculations.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSi2tPIQIc2VEtjarIAHS7/6Z0wpQUCaINnRwAKCRAAHS7/6Z0w
pRYJAQC97ZDW2wBegDbQPsg5ECLX9Lyd6+IC65sdi38IENl+TQEA4/oMzUUceIH+
CDCnxv3fAMhPncJfvIukOLzMJpKw0go=
=8t4O
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Neeraj Upadhyay:
"Expedited grace period updates:
- Protect against early RCU exp quiescent state reporting during exp
grace period initialization
- Remove superfluous barrier in task unblock path
- Remove the CPU online quiescent state report optimization, which is
error prone for certain scenarios
- Add warning for unexpected pending requested expedited quiescent
state on dying CPU
Core:
- Robustify rcu_is_cpu_rrupt_from_idle() by using more accurate
indicators of the actual context tracking state of a CPU
- Handle ->defer_qs_iw_pending field data race
- Enable rcu_normal_wake_from_gp by default on systems with <= 16
CPUs
- Fix lockup in rcu_read_unlock() due to recursive irq_exit() calls
- Refactor expedited handling condition in rcu_read_unlock_special()
- Documentation updates for hotplug and GP init scan ordering,
separation of rcu_state and rnp's gp_seq states, quiescent state
reporting for offline CPUs
torture-scripts:
- Cleanup and improve scripts : remove superfluous warnings for
disabled tests; better handling of kvm.sh --kconfig arg; suppress
some confusing diagnostics; tolerate bad kvm.sh args; add new
diagnostic for build output; fail allmodconfig testing on warnings
- Include RCU_TORTURE_TEST_CHK_RDR_STATE config for KCSAN kernels
- Disable default RCU-tasks and clocksource-wdog testing on arm64
- Add EXPERT Kconfig option for arm64 KCSAN runs
- Remove SRCU-lite testing
rcutorture:
- Start torture writer threads creation after reader threads to
handle race in SRCU-P scenario
- Add SRCU down_read()/up_read() test
- Add diagnostics for delayed SRCU up_read(), unmatched up_read(),
print number of up/down readers and the number of such readers
which migrated to other CPU
- Ignore certain unsupported configurations for trivial RCU test
- Fix splats in RT kernels due to inaccurate checks for BH-disabled
context
- Enable checks and logs to capture intentionally exercised
unexpected scenarios (too short readers) for BUSTED test
- Remove SRCU-lite testing
srcu:
- Expedite SRCU-fast grace periods
- Remove SRCU-lite implementation
- Add guards for SRCU-fast readers
rcu nocb:
- Dump NOCB group leader state on stall detection
- Robustify nocb_cb_kthread pointer accesses
- Fix delayed execution of hurry callbacks when LAZY_RCU is enabled
refscale:
- Fix multiplication overflow in "loops" and "nreaders" calculations"
* tag 'rcu.release.v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (49 commits)
rcu: Document concurrent quiescent state reporting for offline CPUs
rcu: Document separation of rcu_state and rnp's gp_seq
rcu: Document GP init vs hotplug-scan ordering requirements
srcu: Add guards for SRCU-fast readers
rcu: Fix delayed execution of hurry callbacks
rcu: Refactor expedited handling check in rcu_read_unlock_special()
checkpatch: Remove SRCU-lite deprecation
srcu: Remove SRCU-lite implementation
srcu: Expedite SRCU-fast grace periods
rcutorture: Remove support for SRCU-lite
rcutorture: Remove SRCU-lite scenarios
torture: Remove support for SRCU-lite
torture: Make torture.sh --allmodconfig testing fail on warnings
torture: Add "ERROR" diagnostic for testing kernel-build output
torture: Make torture.sh tolerate runs having bad kvm.sh arguments
torture: Add textid.txt file to --do-allmodconfig and --do-rcu-rust runs
torture: Extract testid.txt generation to separate script
torture: Suppress "find" diagnostics from torture.sh --do-none run
torture: Provide EXPERT Kconfig option for arm64 KCSAN torture.sh runs
rcu: Fix rcu_read_unlock() deadloop due to IRQ work
...
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
* Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective subsystems. Only 5
(out of the original 50) will remain in kernel/sysctl.c file; these handle
either sysctl or common arch variables.
By decentralizing sysctl registrations, subsystem maintainers regain control
over their sysctl interfaces, improving maintainability and reducing the
likelihood of merge conflicts.
* docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented in the
check-sysctl-docs script. This script can now be used to automatically
identify if documentation is missing.
* Testing
All these have been in linux-next since rc3, giving them a solid 3 to 4 weeks
worth of testing. Additionally, sysctl selftests and kunit were also run
locally on my x86_64
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEErkcJVyXmMSXOyyeQupfNUreWQU8FAmiAvd8ACgkQupfNUreW
QU+9nAv/dtxaKoL4BXJSzsA2+49bbo9QfiK5Vjz1wSRYRQTb+jhGr9QdS5hG+NeX
uN2ilvcNQqW7ENdiblU10lvcbPjIn2hw4lbMcpv/+QXnrudtGYlBFXlkWqW5nv7X
AVvHU8y3uzfs6JbRIpROUA7Cn2cDOlfP2mMtwxCXR3iP+orS1ziuVEi1JRoirIyG
iq5I/1rJMJBU3FjqqDTq6yljspLx8AlXO1yc5xUxAM67IcY4ew3ZTxqiZr6M9AhV
DUbR2lu/88wcFNERt8DJmuQ50dSGGqOEpK3FURTmkwtMFxzNLmenFDQeBKKahz3Q
2ntXSDfp2y+ppZNmcOP8tZZkra03Xpy1DQyoOgQ2r9uGekPxyr+wmKXwYPOeJIPO
YWTNBm8omX9qr49zVzaZ1f2foRGfgStHL6aa6xLIf34zzScSDEPtO3og2+5Hw/30
gnp+7v9E19uKpoE6oiGE0PtiFzAi/I6nFxzG2RRqrlMLFXyKVccTKygzY6tCnI3P
6144s/Bt
=R369
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective
subsystems. Only 5 (out of the original 50) will remain in
kernel/sysctl.c file; these handle either sysctl or common arch
variables.
By decentralizing sysctl registrations, subsystem maintainers regain
control over their sysctl interfaces, improving maintainability and
reducing the likelihood of merge conflicts.
- docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented
in the check-sysctl-docs script. This script can now be used to
automatically identify if documentation is missing.
* tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits)
docs: Downgrade arm64 & riscv from titles to comment
docs: Replace spaces with tabs in check-sysctl-docs
docs: Remove colon from ctltable title in vm.rst
docs: Add awk section for ucount sysctl entries
docs: Use skiplist when checking sysctl admin-guide
docs: nixify check-sysctl-docs
sysctl: rename kern_table -> sysctl_subsys_table
kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c
uevent: mv uevent_helper into kobject_uevent.c
sysctl: Removed unused variable
sysctl: Nixify sysctl.sh
sysctl: Remove superfluous includes from kernel/sysctl.c
sysctl: Remove (very) old file changelog
sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c
sysctl: move cad_pid into kernel/pid.c
sysctl: Move tainted ctl_table into kernel/panic.c
Input: sysrq: mv sysrq into drivers/tty/sysrq.c
fork: mv threads-max into kernel/fork.c
parisc/power: Move soft-power into power.c
mm: move randomize_va_space into memory.c
...
- staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int()
I was asked to carry this fix, so here it is. :)
- fortify: Fix incorrect reporting of read buffer size
- kstack_erase: Fix missed export of renamed KSTACK_ERASE_CFLAGS
- compiler_types: Provide __no_kstack_erase to disable coverage only on Clang
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIlnHwAKCRA2KwveOeQk
u7tdAQCWoq7YUp1ee2RxYt2UdRhwlMfPE4cYrC1E9GHBA3fRnQD/QMvQ/EJ5eb0Y
u4vO3woSKkMxu4VmZPCzmT0mRNo/kAA=
=RhhL
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.17-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"Notably, this contains the fix for for the GCC __init mess I created
with the kstack_erase annotations.
- staging: media: atomisp: Fix stack buffer overflow in
gmin_get_var_int().
I was asked to carry this fix, so here it is. :)
- fortify: Fix incorrect reporting of read buffer size
- kstack_erase: Fix missed export of renamed KSTACK_ERASE_CFLAGS
- compiler_types: Provide __no_kstack_erase to disable coverage only
on Clang"
* tag 'hardening-v6.17-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
compiler_types: Provide __no_kstack_erase to disable coverage only on Clang
fortify: Fix incorrect reporting of read buffer size
kstack_erase: Fix missed export of renamed KSTACK_ERASE_CFLAGS
staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int()
- Standardize on the __ASSEMBLER__ macro that is provided by GCC
and Clang compilers and replace __ASSEMBLY__ with __ASSEMBLER__
in both uapi and non-uapi headers
- Explicitly include <linux/export.h> in architecture and driver
files which contain an EXPORT_SYMBOL() and remove the include
from the files which do not contain the EXPORT_SYMBOL()
- Use the full title of "z/Architecture Principles of Operation"
manual and the name of a section where facility bits are listed
- Use -D__DISABLE_EXPORTS for files in arch/s390/boot to avoid
unnecessary slowing down of the build and confusing external
kABI tools that process symtypes data
- Print additional unrecoverable machine check information to make
the root cause analysis easier
- Move cmpxchg_user_key() handling to uaccess library code, since
the generated code is large anyway and there is no benefit if it
is inlined
- Fix a problem when cmpxchg_user_key() is executing a code with a
non-default key: if a system is IPL-ed with "LOAD NORMAL", and
the previous system used storage keys where the fetch-protection
bit was set for some pages, and the cmpxchg_user_key() is located
within such page, a protection exception happens
- Either the external call or emergency signal order is used to send
an IPI to a remote CPU. Use the external order only, since it is at
least as good and sometimes even better, than the emergency signal
- In case of an early crash the early program check handler prints
more or less random value of the last breaking event address, since
it is not initialized properly. Copy the last breaking event address
from the lowcore to pt_regs to address this
- During STP synchronization check udelay() can not be used, since the
first CPU modifies tod_clock_base and get_tod_clock_monotonic() might
return a non-monotonic time. Instead, busy-loop on other CPUs, while
the the first CPU actually handles the synchronization operation
- When debugging the early kernel boot using QEMU with the -S flag and
GDB attached, skip the decompressor and start directly in kernel
- Rename PAI Crypto event 4210 according to z16 and z17 "z/Architecture
Principles of Operation" manual
- Remove the in-kernel time steering support in favour of the new s390
PTP driver, which allows the kernel clock steered more precisely
- Remove a possible false-positive warning in pte_free_defer(), which
could be triggered in a valid case KVM guest process is initializing
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaIJQThccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8FI2APwPnlrj6ZVXzNA6dw0fSUt697rS
NlaHEORXL8KcfoQh8QD/WwHUe1VNtDG1R5bBn0guR+UytVgR9Tt7LxyKfIgT3ws=
=tdMb
-----END PGP SIGNATURE-----
Merge tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Standardize on the __ASSEMBLER__ macro that is provided by GCC and
Clang compilers and replace __ASSEMBLY__ with __ASSEMBLER__ in both
uapi and non-uapi headers
- Explicitly include <linux/export.h> in architecture and driver files
which contain an EXPORT_SYMBOL() and remove the include from the
files which do not contain the EXPORT_SYMBOL()
- Use the full title of "z/Architecture Principles of Operation" manual
and the name of a section where facility bits are listed
- Use -D__DISABLE_EXPORTS for files in arch/s390/boot to avoid
unnecessary slowing down of the build and confusing external kABI
tools that process symtypes data
- Print additional unrecoverable machine check information to make the
root cause analysis easier
- Move cmpxchg_user_key() handling to uaccess library code, since the
generated code is large anyway and there is no benefit if it is
inlined
- Fix a problem when cmpxchg_user_key() is executing a code with a
non-default key: if a system is IPL-ed with "LOAD NORMAL", and the
previous system used storage keys where the fetch-protection bit was
set for some pages, and the cmpxchg_user_key() is located within such
page, a protection exception happens
- Either the external call or emergency signal order is used to send an
IPI to a remote CPU. Use the external order only, since it is at
least as good and sometimes even better, than the emergency signal
- In case of an early crash the early program check handler prints more
or less random value of the last breaking event address, since it is
not initialized properly. Copy the last breaking event address from
the lowcore to pt_regs to address this
- During STP synchronization check udelay() can not be used, since the
first CPU modifies tod_clock_base and get_tod_clock_monotonic() might
return a non-monotonic time. Instead, busy-loop on other CPUs, while
the the first CPU actually handles the synchronization operation
- When debugging the early kernel boot using QEMU with the -S flag and
GDB attached, skip the decompressor and start directly in kernel
- Rename PAI Crypto event 4210 according to z16 and z17 "z/Architecture
Principles of Operation" manual
- Remove the in-kernel time steering support in favour of the new s390
PTP driver, which allows the kernel clock steered more precisely
- Remove a possible false-positive warning in pte_free_defer(), which
could be triggered in a valid case KVM guest process is initializing
* tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
s390/mm: Remove possible false-positive warning in pte_free_defer()
s390/stp: Default to enabled
s390/stp: Remove leap second support
s390/time: Remove in-kernel time steering
s390/sclp: Use monotonic clock in sclp_sync_wait()
s390/smp: Use monotonic clock in smp_emergency_stop()
s390/time: Use monotonic clock in get_cycles()
s390/pai_crypto: Rename PAI Crypto event 4210
scripts/gdb/symbols: make lx-symbols skip the s390 decompressor
s390/boot: Introduce jump_to_kernel() function
s390/stp: Remove udelay from stp_sync_clock()
s390/early: Copy last breaking event address to pt_regs
s390/smp: Remove conditional emergency signal order code usage
s390/uaccess: Merge cmpxchg_user_key() inline assemblies
s390/uaccess: Prevent kprobes on cmpxchg_user_key() functions
s390/uaccess: Initialize code pages executed with non-default access key
s390/skey: Provide infrastructure for executing with non-default access key
s390/uaccess: Make cmpxchg_user_key() library code
s390/page: Add memory clobber to page_set_storage_key()
s390/page: Cleanup page_set_storage_key() inline assemblies
...
Certain targets disable kstack_erase by filtering out KSTACK_ERASE_CFLAGS
rather than adding DISABLE_KSTACK_ERASE. The renaming to kstack_erase
missed the CFLAGS export, which broke those build targets (e.g. x86
vdso32).
Fixes: 76261fc7d1 ("stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS")
Signed-off-by: Kees Cook <kees@kernel.org>
- DEBUGFS
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
- SYSFS
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
- Support cache-ids for device-tree systems
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
- Rust
- Device
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
- Misc
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaIjkhwAKCRBFlHeO1qrK
LpXuAP9RWwfD9ZGgQZ9OsMk/0pZ2mDclaK97jcmI9TAeSxeZMgD1FHnOMTY7oSIi
iG7Muq0yLD+A5gk9HUnMUnFNrngWCg==
=jgRj
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
Add KUnit test suites for the Poly1305, SHA-1, SHA-224, SHA-256,
SHA-384, and SHA-512 library functions.
These are the first KUnit tests for lib/crypto/. So in addition to
being useful tests for these specific algorithms, they also establish
some conventions for lib/crypto/ testing going forwards.
The new tests are fairly comprehensive: more comprehensive than the
generic crypto infrastructure's tests. They use a variety of
techniques to check for the types of implementation bugs that tend to
occur in the real world, rather than just naively checking some test
vectors. (Interestingly, poly1305_kunit found a bug in QEMU.)
The core test logic is shared by all six algorithms, rather than being
duplicated for each algorithm.
Each algorithm's test suite also optionally includes a benchmark.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ+WhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK+C4AQCOi7iOlFLouUfu9klrovp3i/iSMhyQ
gUEHPGSelBy4wQD+NnrLGIdpCcaDAzyWpT4TxG6esN2/97ewh4VUa2MDuQQ=
=rS0F
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library test updates from Eric Biggers:
"Add KUnit test suites for the Poly1305, SHA-1, SHA-224, SHA-256,
SHA-384, and SHA-512 library functions.
These are the first KUnit tests for lib/crypto/. So in addition to
being useful tests for these specific algorithms, they also establish
some conventions for lib/crypto/ testing going forwards.
The new tests are fairly comprehensive: more comprehensive than the
generic crypto infrastructure's tests. They use a variety of
techniques to check for the types of implementation bugs that tend to
occur in the real world, rather than just naively checking some test
vectors. (Interestingly, poly1305_kunit found a bug in QEMU)
The core test logic is shared by all six algorithms, rather than being
duplicated for each algorithm.
Each algorithm's test suite also optionally includes a benchmark"
* tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: tests: Annotate worker to be on stack
lib/crypto: tests: Add KUnit tests for SHA-1 and HMAC-SHA1
lib/crypto: tests: Add KUnit tests for Poly1305
lib/crypto: tests: Add KUnit tests for SHA-384 and SHA-512
lib/crypto: tests: Add KUnit tests for SHA-224 and SHA-256
lib/crypto: tests: Add hash-test-template.h and gen-hash-testvecs.py
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIfUkgAKCRA2KwveOeQk
uypLAP92r6f47sWcOw/5B9aVffX6Bypsb7dqBJQpCNxI5U1xcAEAiCrZ98UJyOeQ
JQgnXd4N67K4EsS2JDc+FutRn3Yi+A8=
=+5Bq
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
* tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
sched/task_stack: Add missing const qualifier to end_of_stack()
kstack_erase: Support Clang stack depth tracking
kstack_erase: Add -mgeneral-regs-only to silence Clang warnings
init.h: Disable sanitizer coverage for __init and __head
kstack_erase: Disable kstack_erase for all of arm compressed boot code
x86: Handle KCOV __init vs inline mismatches
arm64: Handle KCOV __init vs inline mismatches
s390: Handle KCOV __init vs inline mismatches
arm: Handle KCOV __init vs inline mismatches
mips: Handle KCOV __init vs inline mismatch
powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section
configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON
configs/hardening: Enable CONFIG_KSTACK_ERASE
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth
stackleak: Rename STACKLEAK to KSTACK_ERASE
seq_buf: Introduce KUnit tests
string: Group str_has_prefix() and strstarts()
kunit/fortify: Add back "volatile" for sizeof() constants
acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCpgAKCRCRxhvAZXjc
oqfFAQDcy3rROUF3W34KcSi7rDmaKVSX53d1tUoqH+1zDRpSlwEAriKDNC1ybudp
YAnxVzkRHjHs1296WIuwKq5lfhJ60Q4=
=geAl
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fileattr updates from Christian Brauner:
"This introduces the new file_getattr() and file_setattr() system calls
after lengthy discussions.
Both system calls serve as successors and extensible companions to
the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have
started to show their age in addition to being named in a way that
makes it easy to conflate them with extended attribute related
operations.
These syscalls allow userspace to set filesystem inode attributes on
special files. One of the usage examples is the XFS quota projects.
XFS has project quotas which could be attached to a directory. All new
inodes in these directories inherit project ID set on parent
directory.
The project is created from userspace by opening and calling
FS_IOC_FSSETXATTR on each inode. This is not possible for special
files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left
with empty project ID. Those inodes then are not shown in the quota
accounting but still exist in the directory. This is not critical but
in the case when special files are created in the directory with
already existing project quota, these new inodes inherit extended
attributes. This creates a mix of special files with and without
attributes. Moreover, special files with attributes don't have a
possibility to become clear or change the attributes. This, in turn,
prevents userspace from re-creating quota project on these existing
files.
In addition, these new system calls allow the implementation of
additional attributes that we couldn't or didn't want to fit into the
legacy ioctls anymore"
* tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: tighten a sanity check in file_attr_to_fileattr()
tree-wide: s/struct fileattr/struct file_kattr/g
fs: introduce file_getattr and file_setattr syscalls
fs: prepare for extending file_get/setattr()
fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP
selinux: implement inode_file_[g|s]etattr hooks
lsm: introduce new hooks for setting/getting inode fsxattr
fs: split fileattr related helpers into separate file
text_insert_help() and text_insert_msg() share similar code.
Refactor text_insert_help() to eliminate the code duplication.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Clicking the Back button may navigate to a non-menu hierarchy level.
[Example]
menu "menu1"
config A
bool "A"
default y
config B
bool "B"
depends on A
default y
menu "menu2"
depends on B
config C
bool "C"
default y
endmenu
endmenu
After being re-parented by menu_finalize(), the menu tree is structured
like follows:
menu "menu1"
\-- A
\-- B
\-- menu "menu2"
\-- C
In Single view, visit "menu2" and click the Back button. It should go up
to "menu1" and show A, B and "menu2", but instead goes up to A and show
only B and "menu2". This is a bug in on_back_clicked().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In the following example, the symbol C was never displayed in Single
view. Fix the recursion logic so that all symbols are shown.
menu "menu"
config A
bool "A"
config B
bool "B"
depends on A
config C
bool "C"
depends on B
endmenu
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Zboot compressed kernel images are used for arm64 kernels on various
distros.
extract-vmlinux fails with those kernels because the wrapped image is
another PE. While this could be a bit confusing, the tools primary
purpose of unwrapping and decompressing the contained kernel image
makes it the obvious place for this functionality.
Add a 'file' check in check_vmlinux() that detects a contained PE
image before trying readelf. Recent (FILES_39, Jun/2020) file
implementations output something like:
"Linux kernel ARM64 boot executable Image, little-endian, 4K pages"
Which is also a stronger statement than readelf provides so drop that
part of the comment. At the same time this means that kernel images
which don't appear to contain a compressed image will be returned
rather than reporting an error. Which matches the behavior for
existing ELF files.
The extracted PE image can then be inspected, or used as would any
other kernel PE.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When writing symtypes information, we iterate through the entire hash
table containing type expansions. The key order varies unpredictably
as new entries are added, making it harder to compare symtypes between
builds.
Resolve this by sorting the type expansions by name before output.
Signed-off-by: Giuliano Procida <gprocida@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The preferred form is to use the variable being allocated to, rather
than explicitly supplying a type name which might become stale.
Also do this for memset.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Giuliano Procida <gprocida@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ConfigList::updateListForAll() and ConfigList::updateListAllforAll()
are identical.
Commit f9b918fae6 ("kconfig: qconf: move ConfigView::updateList(All)
to ConfigList class") was a misconversion.
Fixes: f9b918fae6 ("kconfig: qconf: move ConfigView::updateList(All) to ConfigList class")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is useful for debugging purposes. menu_finalize() re-parents menu
entries, and this function can be used to dump the final structure of
the menu tree.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Likewise xconfig, it is useful to display the GTK version in the About
dialog.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
GdkColor is deprecated with GTK 3.14. [1]
Use GdkRGBA instead.
This fixes warnings such as:
scripts/kconfig/gconf.c: In function ‘set_node’:
scripts/kconfig/gconf.c:138:9: warning: ‘gdk_color_parse’ is deprecated: Use 'gdk_rgba_parse' instead [-Wdeprecated-declarations]
138 | gdk_color_parse(menu_is_visible(menu) ? "Black" : "DarkGray", &color);
| ^~~~~~~~~~~~~~~
[1]: https://gitlab.gnome.org/GNOME/gtk/-/blob/3.14.0/gdk/deprecated/gdkcolor.h#L52
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
This commit switches from GTK 2.x to GTK 3, applying the following
necessary changes:
- Do not include individual headers
- GtkObject is gone
- Convert Glade to GtkBuilder
Link: https://docs.gtk.org/gtk3/migrating-2to3.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
The next commit will convert this file to GtkBuilder format. Rename
it in advance to reflect the intended format.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
This function recreates the tree store to update the menu content.
Rename it to recreate_tree() to better reflect its purpose.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The size-request event handler is currently used to adjust the position
of the horizontal separator in the right pane.
However, the size-request signal is not available in GTK 3. Use the
configure-event signal instead.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
A menu can be created under a symbol.
[Example]
menu "outer menu"
config A
bool "A"
menu "inner menu"
depends on A
config B
bool "B"
endmenu
endmenu
After being re-parented by menu_finalize(), the menu tree is structured
like follows:
menu "outer menu"
\-- A
\-- menu "inner menu"
\-- B
In split view, the symbol A is shown in the right pane, so all of its
descendants must also be shown there. This has never worked correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
strncpy() does not guarantee null-termination if the source string is
longer than the destination buffer.
Ensure the buffer is explicitly null-terminated to prevent potential
string overflows or undefined behavior.
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Nicolas Schier <n.schier@avm.de>
Acked-by: Nicolas Schier <n.schier@avm.de>
This patch adds the functionability to smartly identify origin commit
of the translation by matching the following patterns in commit log:
1) update to commit HASH
2) Update the translation through commit HASH
If no such pattern is found, script will obey the original workflow.
Signed-off-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250713163418.1459-1-zhiyuzhang999@gmail.com
Adjust the sysctl table detection to include the macro pattern used for
the ucount ctl_tables. This prevents falsly assigning them as
non-documented ctl_tables
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Use a skiplist to "skip" the titles in the guide documentation
(Documentation/admin-guide/sysctl/*) that are not sysctls. This will
give a more accurate account of what sysctl are miss-documented.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Use "#!/usr/bin/env -S gawk -f" instead of "#!/bin/gawk". Needed for
testing in nix environments as they only provide /usr/bin/env at the
standard location.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Ftrace is tightly coupled with architecture specific code because it
requires the use of trampolines written in assembly. This means that when
a new feature or optimization is made, it must be done for all
architectures. To simplify the approach, CONFIG_HAVE_FTRACE_* configs are
added to denote which architecture has the new enhancement so that other
architectures can still function until they too have been updated.
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant
with the HAVE_DYNAMIC_FTRACE.
Remove the HAVE_FTRACE_MCOUNT config and use DYNAMIC_FTRACE directly where
applicable.
Link: https://lore.kernel.org/all/20250703154916.48e3ada7@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250704104838.27a18690@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In preparation for Clang stack depth tracking for KSTACK_ERASE,
split the stackleak-specific cflags out of GCC_PLUGINS_CFLAGS into
KSTACK_ERASE_CFLAGS.
Link: https://lore.kernel.org/r/20250717232519.2984886-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
The Clang stack depth tracking implementation has a fixed name for
the stack depth tracking callback, "__sanitizer_cov_stack_depth", so
rename the GCC plugin function to match since the plugin has no external
dependencies on naming.
Link: https://lore.kernel.org/r/20250717232519.2984886-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for adding Clang sanitizer coverage stack depth tracking
that can support stack depth callbacks:
- Add the new top-level CONFIG_KSTACK_ERASE option which will be
implemented either with the stackleak GCC plugin, or with the Clang
stack depth callback support.
- Rename CONFIG_GCC_PLUGIN_STACKLEAK as needed to CONFIG_KSTACK_ERASE,
but keep it for anything specific to the GCC plugin itself.
- Rename all exposed "STACKLEAK" names and files to "KSTACK_ERASE" (named
for what it does rather than what it protects against), but leave as
many of the internals alone as possible to avoid even more churn.
While here, also split "prev_lowest_stack" into CONFIG_KSTACK_ERASE_METRICS,
since that's the only place it is referenced from.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250717232519.2984886-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Include all information in the panic message rather than emit fragments
to stderr to avoid possible interleaving with other output.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250529-idiomatic-match-slice-v2-2-4925ca2f1550@gmail.com
[ Kept newlines using `writeln!`. Used new message from Tamir. Reworded
title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Use a match expression with slice patterns instead of length checks and
indexing. The result is more idiomatic, which is a better example for
future Rust code authors.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250529-idiomatic-match-slice-v2-1-4925ca2f1550@gmail.com
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There's a comprehensive example in `rust/kernel/list.rs` but it doesn't
exercise the `using ListLinksSelfPtr` variant nor the generic cases. Add
that here. Generalize `impl_has_list_links_self_ptr` to handle nested
fields in the same manner as `impl_has_list_links`.
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250709-list-no-offset-v4-5-a429e75840a9@gmail.com
[ Fixed Rust < 1.82 build by enabling the `offset_of_nested`
feature. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Toolchain and infrastructure:
- Fix build and modpost confusion for the upcoming Rust 1.89.0 release.
- Clean objtool warning for the upcoming Rust 1.89.0 release by adding
one more noreturn function.
'kernel' crate:
- Fix build error when using generics in the 'try_{,pin_}init!' macros.
-----BEGIN PGP SIGNATURE-----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=mz3t
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix build and modpost confusion for the upcoming Rust 1.89.0
release
- Clean objtool warning for the upcoming Rust 1.89.0 release by
adding one more noreturn function
'kernel' crate:
- Fix build error when using generics in the 'try_{,pin_}init!'
macros"
* tag 'rust-fixes-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: use `#[used(compiler)]` to fix build and `modpost` with Rust >= 1.89.0
objtool/rust: add one more `noreturn` Rust function for Rust 1.89.0
rust: init: Fix generics in *_init! macros
Kernel-doc requires at least version 3.6 to run, as it uses f-string.
Yet, Kernel build currently calls kernel-doc with -none on some places.
Better not to bail out when older versions are found.
Versions of Python prior to 3.7 do not guarantee to remember the insertion
order of dicts; since kernel-doc depends on that guarantee, running with
such older versions could result in output with reordered sections.
Check Python version when called via command line.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/7d7fa3a3aa1fafa0cc9ea29c889de4c7d377dca6.1752218291.git.mchehab+huawei@kernel.org
Now that SRCU-lite has been removed from the kernel, let's remove the
now-redundant deprecation from checkpatch.pl.
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
The kerneldoc parsing phase gathers all of the information about the
declarations of interest, then passes it through to the output phase as a
dict that is an unstructured blob of information; this organization has its
origins in the Perl version of the program. It results in an interface
that is difficult to reason about, dozen-parameter function calls, and
other ills.
Introduce a new class (KdocItem) to carry this information between the
parser and the output modules, and, step by step, modify the system to use
this class in a more structured way. This could be taken further by
creating a subclass of KdocItem for each declaration type (function,
struct, ...), but that is probably more structure than we need.
The result is (I hope) clearer code, the removal of a bunch of boilerplate,
and no changes to the generated output.
Versions of Python prior to 3.7 do not guarantee to remember the insertion
order of dicts; since kernel-doc depends on that guarantee, running with
such older versions could result in output with reordered sections.
Python 3.9 is the minimum for the kernel as a whole, so this should not be
a problem, but put in a warning just in case somebody tries to use
something older.
Suggested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
entry.sectcheck is just a duplicate of our list of sections that is only
passed to check_sections(); its main purpose seems to be to avoid checking
the special named sections. Rework check_sections() to not use that field
(which is then deleted), tocheck for the known sections directly, and
tighten up the logic in general.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
They are part of the interface, so use them directly. This allows the
removal of the transitional __dict__ hack in KdocItem.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Get rid of the excess "return" statements in dump_declaration(), along with
a line of never-executed dead code.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Each declaration type passes through the name in a unique field of the
"args" blob - even though we have always just passed the name separately.
Get rid of all the weird names and just use the common version.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Callers to output_declaration() always pass the parameter information from
self.entry; remove all of the boilerplate arguments and just get at that
information directly. Formalize its placement in the KdocItem class.
It would be nice to get rid of parameterlist as well, but that has the
effect of reordering the output of function parameters and struct fields to
match the order in the kerneldoc comment rather than in the declaration.
One could argue about which is more correct, but the ordering has been left
unchanged for now.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Callers of check_sections() join parameterlist into a single string, which
is then immediately split back into the original list. Rather than do all
that, just use parameterlist directly in check_sections().
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The code goes out of its way to create a special list of parameters in
entry.struct_actual that is just like entry.parameterlist, but with extra
junk. The only use of that information, in check_sections(), promptly
strips all the extra junk back out. Drop all that extra work and just use
parameterlist.
No output changes.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The section list always comes directly from the under-construction entry
and is used uniformly. Formalize section handling in the KdocItem class,
and have output_declaration() load the sections directly from the entry,
eliminating a lot of duplicated, verbose parameters.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Python dicts (as of 3.7) are guaranteed to remember the insertion order of
items, so we do not need a separate list for that purpose. Drop the
per-entry sectionlist variable and just rely on native dict ordering.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Starting with Rust 1.89.0 (expected 2025-08-07), the Rust compiler fails
to build the `rusttest` target due to undefined references such as:
kernel...-cgu.0:(.text....+0x116): undefined reference to
`rust_helper_kunit_get_current_test'
Moreover, tooling like `modpost` gets confused:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/nova/nova.o
ERROR: modpost: missing MODULE_LICENSE() in drivers/gpu/nova-core/nova_core.o
The reason behind both issues is that the Rust compiler will now [1]
treat `#[used]` as `#[used(linker)]` instead of `#[used(compiler)]`
for our targets. This means that the retain section flag (`R`,
`SHF_GNU_RETAIN`) will be used and that they will be marked as `unique`
too, with different IDs. In turn, that means we end up with undefined
references that did not get discarded in `rusttest` and that multiple
`.modinfo` sections are generated, which confuse tooling like `modpost`
because they only expect one.
Thus start using `#[used(compiler)]` to keep the previous behavior
and to be explicit about what we want. Sadly, it is an unstable feature
(`used_with_arg`) [2] -- we will talk to upstream Rust about it. The good
news is that it has been available for a long time (Rust >= 1.60) [3].
The changes should also be fine for previous Rust versions, since they
behave the same way as before [4].
Alternatively, we could use `#[no_mangle]` or `#[export_name = ...]`
since those still behave like `#[used(compiler)]`, but of course it is
not really what we want to express, and it requires other changes to
avoid symbol conflicts.
Cc: David Wood <david@davidtw.co>
Cc: Wesley Wiser <wwiser@gmail.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/140872 [1]
Link: https://github.com/rust-lang/rust/issues/93798 [2]
Link: https://github.com/rust-lang/rust/pull/91504 [3]
Link: https://godbolt.org/z/sxzWTMfzW [4]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Link: https://lore.kernel.org/r/20250712160103.1244945-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a KUnit test suite for the Poly1305 functions. Most of its test
cases are instantiated from hash-test-template.h, which is also used by
the SHA-2 tests. A couple additional test cases are also included to
test edge cases specific to Poly1305.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250709200112.258500-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add hash-test-template.h which generates the following KUnit test cases
for hash functions:
test_hash_test_vectors
test_hash_all_lens_up_to_4096
test_hash_incremental_updates
test_hash_buffer_overruns
test_hash_overlaps
test_hash_alignment_consistency
test_hash_ctx_zeroization
test_hash_interrupt_context_1
test_hash_interrupt_context_2
test_hmac (when HMAC is supported)
benchmark_hash (when CONFIG_CRYPTO_LIB_BENCHMARK=y)
The initial use cases for this will be sha224_kunit, sha256_kunit,
sha384_kunit, sha512_kunit, and poly1305_kunit.
Add a Python script gen-hash-testvecs.py which generates the test
vectors required by test_hash_test_vectors,
test_hash_all_lens_up_to_4096, and test_hmac.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250709200112.258500-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Paolo Abeni says:
====================
virtio: introduce GSO over UDP tunnel
Some virtualized deployments use UDP tunnel pervasively and are impacted
negatively by the lack of GSO support for such kind of traffic in the
virtual NIC driver.
The virtio_net specification recently introduced support for GSO over
UDP tunnel, this series updates the virtio implementation to support
such a feature.
Currently the kernel virtio support limits the feature space to 64,
while the virtio specification allows for a larger number of features.
Specifically the GSO-over-UDP-tunnel-related virtio features use bits
65-69.
The first four patches in this series rework the virtio and vhost
feature support to cope with up to 128 bits. The limit is set by
a define and could be easily raised in future, as needed.
This implementation choice is aimed at keeping the code churn as
limited as possible. For the same reason, only the virtio_net driver is
reworked to leverage the extended feature space; all other
virtio/vhost drivers are unaffected, but could be upgraded to support
the extended features space in a later time.
The last four patches bring in the actual GSO over UDP tunnel support.
As per specification, some additional fields are introduced into the
virtio net header to support the new offload. The presence of such
fields depends on the negotiated features.
New helpers are introduced to convert the UDP-tunneled skb metadata to
an extended virtio net header and vice versa. Such helpers are used by
the tun and virtio_net driver to cope with the newly supported offloads.
Tested with basic stream transfer with all the possible permutations of
host kernel/qemu/guest kernel with/without GSO over UDP tunnel support.
====================
Link: https://patch.msgid.link/cover.1751874094.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When one starts QEMU with the -S flag and attaches GDB, the kernel is
not yet loaded, and the current instruction is an entry point to the
decompressor. In case the intention is to debug the early kernel boot,
and not the decompressor, e.g., put a breakpoint on some kernel
function and see all the invocations, one has to skip the decompressor.
There are many ways to do this, and so far people wrote private scripts
or memorized certain command sequences.
Make it work out of the box like this:
$ gdb -ex 'target remote :6812' -ex 'source vmlinux-gdb.py' vmlinux
Remote debugging using :6812
0x0000000000010000 in ?? ()
(gdb) lx-symbols
loading vmlinux
(gdb) x/i $pc
=> 0x3ffe0100000 <startup_continue>: lghi %r2,0
Implement this by reading the address of the jump_to_kernel() function
from the lowcore, and step until DAT is turned on.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20250625154220.75300-3-iii@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
All of the ID tables based on <linux/mod_devicetable.h> (of_device_id,
pci_device_id, ...) require their arrays to end in an empty sentinel
value. That's usually spelled with an empty initializer entry (e.g.,
"{}"), but also sometimes with explicit 0 entries, field initializers
(e.g., '.id = ""'), or even a macro entry (like PCMCIA_DEVICE_NULL).
Without a sentinel, device-matching code may read out of bounds.
I've found a number of such bugs in driver reviews, and we even
occasionally commit one to the tree. See commit 5751eee5c6 ("i2c:
nomadik: Add missing sentinel to match table") for example.
Teach checkpatch to find these ID tables, and complain if it looks like
there wasn't a sentinel value.
Test output:
$ git format-patch -1 a0d15cc47f --stdout | scripts/checkpatch.pl -
ERROR: missing sentinel in ID array
#57: FILE: drivers/i2c/busses/i2c-nomadik.c:1073:
+static const struct of_device_id nmk_i2c_eyeq_match_table[] = {
{
.compatible = "XXXXXXXXXXXXXXXXXX",
.data = (void *)(NMK_I2C_EYEQ_FLAG_32B_BUS | NMK_I2C_EYEQ_FLAG_IS_EYEQ5),
},
};
total: 1 errors, 0 warnings, 66 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
"[PATCH] i2c: nomadik: switch from of_device_is_compatible() to" has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
When run across the entire tree (scripts/checkpatch.pl -q --types
MISSING_SENTINEL -f ...), false positives exist:
* where macros are used that hide the table from analysis
(e.g., drivers/gpu/drm/radeon/radeon_drv.c / radeon_PCI_IDS).
There are fewer than 5 of these.
* where such tables are processed correctly via ARRAY_SIZE() (fewer than
5 instances). This is by far not the typical usage of *_device_id
arrays.
* some odd parsing artifacts, where ctx_statement_block() seems to quit
in the middle of a block due to #if/#else/#endif.
Also, not every "struct *_device_id" is in fact a sentinel-requiring
structure, but even with such types, false positives are very rare.
Link: https://lkml.kernel.org/r/20250702235245.1007351-1-briannorris@chromium.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since these are now no longer defines, but in an enum.
Link: https://lkml.kernel.org/r/20250618134629.25700-2-johannes@sipsolutions.net
Fixes: 101f2bbab5 ("fs: convert mount flags to enum")
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current code that checks for misspelling verifies, in a more
complex regex, if $rawline matches [^\w]($misspellings)[^\w]
Being $rawline a byte-string, a utf-8 character in $rawline can
match the non-word-char [^\w].
E.g.:
./scripts/checkpatch.pl --git 81c2f059ab
WARNING: 'ment' may be misspelled - perhaps 'meant'?
#36: FILE: MAINTAINERS:14360:
+M: Clément Léger <clement.leger@bootlin.com>
^^^^
Use a utf-8 version of $rawline for spell checking.
Link: https://lkml.kernel.org/r/20250616-b4-checkpatch-upstream-v2-1-5600ce4a3b43@foss.st.com
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The empty MOD_CODETAG_SECTIONS() macro added an incomplete .data section
in module linker script, which caused symbol lookup tools like gdb to
misinterpret symbol addresses e.g., __ib_process_cq incorrectly mapping to
unrelated functions like below.
(gdb) disas __ib_process_cq
Dump of assembler code for function trace_event_fields_cq_schedule:
Removing the empty section restores proper symbol resolution and layout,
ensuring .data placement behaves as expected.
Link: https://lkml.kernel.org/r/20250610162258.324645-1-cachen@purestorage.com
Fixes: 0db6f8d782 ("alloc_tag: load module tags into separate contiguous memory")
22d407b164 ("lib: add allocation tagging support for memory allocation profiling")
Signed-off-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Yuanyuan Zhong <yzhong@purestorage.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The per-CPU MCE interrupts are looked up by reference and need to be
de-referenced before printing, otherwise we print the addresses of the
variables instead of their contents:
MCE: 18379471554386948492 Machine check exceptions
MCP: 18379471554386948488 Machine check polls
The corrected output looks like this instead now:
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
Link: https://lkml.kernel.org/r/20250625021109.1057046-1-florian.fainelli@broadcom.com
Link: https://lkml.kernel.org/r/20250624030020.882472-1-florian.fainelli@broadcom.com
Fixes: b0969d7687 ("scripts/gdb: print interrupts")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In commit 721255b982 ("genirq: Use a maple tree for interrupt descriptor
management"), the irq_desc_tree was replaced with a sparse_irqs tree using
a maple tree structure. Since the script looked for the irq_desc_tree
symbol which is no longer available, no interrupts would be printed and
the script output would not be useful anymore.
In addition to looking up the correct symbol (sparse_irqs), a new module
(mapletree.py) is added whose mtree_load() implementation is largely
copied after the C version and uses the same variable and intermediate
function names wherever possible to ensure that both the C and Python
version be updated in the future.
This restores the scripts' output to match that of /proc/interrupts.
Link: https://lkml.kernel.org/r/20250625021020.1056930-1-florian.fainelli@broadcom.com
Fixes: 721255b982 ("genirq: Use a maple tree for interrupt descriptor management")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Shanker Donthineni <sdonthineni@nvidia.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The text line would not be appended to as it should have, it should have
been a '+=' but ended up being a '==', fix that.
Link: https://lkml.kernel.org/r/20250623164153.746359-1-florian.fainelli@broadcom.com
Fixes: b0969d7687 ("scripts/gdb: print interrupts")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The mentioned macro introduce by the next patch will foul kdoc;
fully expand the mentioned macro to avoid the issue.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add some comments to dump_enum to help the next person who has to figure
out what it is actually doing.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-8-corbet@lwn.net
Add a set of comments to process_proto_function and reorganize the logic
slightly; no functional change.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-6-corbet@lwn.net
process_proto_type() is using a complex regex and a "while True" loop to
split a declaration into chunks and, in the end, count brackets. Switch to
using a simpler regex to just do the split directly, and handle each chunk
as it comes. The result is, IMO, easier to understand and reason about.
The old algorithm would occasionally elide the space between function
parameters; see struct rng_alg->generate(), foe example. The only output
difference is to not elide that space, which is more correct.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-5-corbet@lwn.net
Putting the floor under brcount does not change the output in any way, just
remove it.
Change the termination test from ==0 to <=0 to prevent infinite loops in
case somebody does something truly wacko in the code.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-4-corbet@lwn.net
process_proto_type() and process_proto_function() reinventing the strip()
string method with a whole series of separate regexes; take all that out
and just use strip().
The previous implementation also (in process_proto_type()) removed C++
comments *after* the above dance, leaving trailing whitespace in that case;
now we do the stripping afterward. This results in exactly one output
change: the removal of a spurious space in the definition of
BACKLIGHT_POWER_REDUCED - see
https://docs.kernel.org/gpu/backlight.html#c.backlight_properties.
I note that we are putting semicolons after #define lines that really
shouldn't be there - a task for another day.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-2-corbet@lwn.net
Since our output items contain their name, we don't need to pass it
separately.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This class is intended to replace the unstructured dict used to accumulate
an entry to pass to an output module. For now, it remains unstructured,
but it works well enough that the output classes don't notice the
difference.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Introduce file_getattr() and file_setattr() syscalls to manipulate inode
extended attributes. The syscalls takes pair of file descriptor and
pathname. Then it operates on inode opened accroding to openat()
semantics. The struct file_attr is passed to obtain/change extended
attributes.
This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference
that file don't need to be open as we can reference it with a path
instead of fd. By having this we can manipulated inode extended
attributes not only on regular files but also on special ones. This
is not possible with FS_IOC_FSSETXATTR ioctl as with special files
we can not call ioctl() directly on the filesystem inode using fd.
This patch adds two new syscalls which allows userspace to get/set
extended inode attributes on special files by using parent directory
and a path - *at() like syscall.
CC: linux-api@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: linux-xfs@vger.kernel.org
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This is no longer available in GTK 3. Use "tooltip-text" instead.
Also reword "Goes up of one level" to "Goes up one level" while I am
here.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The tips are still displayed without this.
This property does not exist in GtkBuilder with GTK 3.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There is no need to reconstruct the entire tree store when a symbol's
value changes. Simply call gtk_tree_store_set() to update the row data.
Introduce update_trees() to factor out the common update logic.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The row[] array is used to prepare data passed to set_node(), but this
indirection is unnecessary. Squash fill_row() into set_node() and call
gtk_tree_store_set() directly.
Also, calling gdk_pixbuf_new_from_xpm_data() for every row is
inefficient. Call it once and store the resulting pixbuf in a global
variable.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
These variables are unnecessary because the current model can be
retrieved using gtk_tree_view_get_model().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Currently, update_tree() adds/removes entries to show/hide rows.
This approach is extremely complicated.
Use the tree model filter to control row visibility instead.
Do not toggle the MENU_CHANGED flag, as it is hard to control this
correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Preserve the current menu selection when switching to a different view
mode, as it improves usability.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'current' (SINGLE view) and 'browsed' (SPLIT_VIEW) variables serve
similar purposes and are not needed at the same time. Merge them.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
These are modal dialogs in xconfig. Make them modal in gconfig as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
The "window" and "style" arguments for replace_button_icon() are
now unused. Remove them and refactor the function accordingly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
gdk_pixmap_create_from_xpm_d has been deprecated since version 2.22.
Use a GdkPixbuf instead. You can use gdk_pixbuf_new_from_xpm_data() to
create it. [1]
[1]: https://gitlab.gnome.org/GNOME/gtk/-/blob/2.24.33/gdk/gdkpixmap.c#L742
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The "clicked" event handler for GtkToolButton takes the GtkToolButton*
as the first parameter.
This is different from the existing on_save_activate() handler.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Although this is only used in the right tree view, it is better not to
hardcode model2 for consistency.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The on_treeview2_cursor_changed() handler is connected to both the left
and right tree views, but it hardcodes model2 (the GtkTreeModel of the
right tree view). This is incorrect. Get the associated model from the
view.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, on_treeview2_key_press_event() returns early for the tree1
widget. We can make it work on the left pane as well by avoiding the
hardcoded use of model2.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This clarifies which view is currently selected.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Factor out common code for setting the view into a new function,
set_view_mode().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Add some comments to dump_enum to help the next person who has to figure
out what it is actually doing.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add a set of comments to process_proto_function and reorganize the logic
slightly; no functional change.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
process_proto_type() is using a complex regex and a "while True" loop to
split a declaration into chunks and, in the end, count brackets. Switch to
using a simpler regex to just do the split directly, and handle each chunk
as it comes. The result is, IMO, easier to understand and reason about.
The old algorithm would occasionally elide the space between function
parameters; see struct rng_alg->generate(), foe example. The only output
difference is to not elide that space, which is more correct.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Now that "inline_*" are just ordinary parser states, split them into two
separate functions, getting rid of some nested conditional logic.
The original process_inline() would simply ignore lines that didn't match
any of the regexes (those lacking the initial " * " marker). I have
preserved that behavior, but we should perhaps emit a warning instead.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627184000.132291-9-corbet@lwn.net
The processing of inline kerneldoc comments is a state like the rest, but
it was implemented as a set of separate substates. Just remove the
substate logic and make the inline states normal ones like the rest.
INLINE_ERROR was never actually used for anything, so just take it out.
No changes to the generated output.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627184000.132291-8-corbet@lwn.net
Reorganize process_export() to eliminate duplicated code, don't look for
exports in states where we don't expect them, and don't bother with normal
state-machine processing if an export declaration has been found.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627184000.132291-6-corbet@lwn.net
The type_param regex matches "@..." just fine, so the special-case branch
for that in dump_section() is never executed. Just remove it.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627184000.132291-4-corbet@lwn.net
Rather than having other code mucking around with this bit of internal
state, encapsulate it internally. Accumulate the description as a list of
strings, joining them at the end, which is a more efficient way of building
the text.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627184000.132291-3-corbet@lwn.net
The tree1 and tree2 variables are initialized earlier in
init_tree_model(), so the NULL checks are redundant.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The parents[] array is used to store the GtkTreeIter of parent nodes,
but this can be simplified: we can pass a GtkTreeIter pointer down
when _display_tree() recurses.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
gtk_set_locale() has been deprecated since version 2.24, and setlocale()
should be used directly. [1]
However, gtk_init() automatically does this, so there is typically no
point in calling this function.
[1]: https://gitlab.gnome.org/GNOME/gtk/-/blob/2.24.33/gtk/gtkmain.c#L1152
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'widget' variable is set, but not used in later code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
When gtk_dialog_run() returns GTK_RESPONSE_YES or GTK_RESPONSE_NO,
gtk_widget_destroy() is not called, resulting in a memory leak.
It is better to always destroy the dialog, even if the application
is about to exit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Putting the floor under brcount does not change the output in any way, just
remove it.
Change the termination test from ==0 to <=0 to prevent infinite loops in
case somebody does something truly wacko in the code.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
If gtk_tree_model_get_iter() fails, gtk_tree_path_free() is not called.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
The variable "resizeable" is a typo and always set to FALSE, resulting
in dead code in init_right_tree(). It is unclear column resizing should
be disabled. Enable it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
This helper returns the parent menu, or NULL if there is no parent.
The main difference from the previous version is that it always returns
the parent menu even when the given argument is itself a menu.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
The current menu_get_parent_menu() does not always return the parent
menu; if the given argument is itself a menu, it returns that menu.
Rename this function to better reflect this behavior.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
It is useful to display the selected choice's value in the Value column.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
When you select "Show All Options" or "Show Prompt Options", choice
entries display a check box icon, but this has no point because
choice is always y since commit fde192511b ("kconfig: remove tristate
choice support").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
process_proto_type() and process_proto_function() reinventing the strip()
string method with a whole series of separate regexes; take all that out
and just use strip().
The previous implementation also (in process_proto_type()) removed C++
comments *after* the above dance, leaving trailing whitespace in that case;
now we do the stripping afterward. This results in exactly one output
change: the removal of a spurious space in the definition of
BACKLIGHT_POWER_REDUCED - see
https://docs.kernel.org/gpu/backlight.html#c.backlight_properties.
I note that we are putting semicolons after #define lines that really
shouldn't be there - a task for another day.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Now that "inline_*" are just ordinary parser states, split them into two
separate functions, getting rid of some nested conditional logic.
The original process_inline() would simply ignore lines that didn't match
any of the regexes (those lacking the initial " * " marker). I have
preserved that behavior, but we should perhaps emit a warning instead.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The processing of inline kerneldoc comments is a state like the rest, but
it was implemented as a set of separate substates. Just remove the
substate logic and make the inline states normal ones like the rest.
INLINE_ERROR was never actually used for anything, so just take it out.
No changes to the generated output.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
In gconf, choice entries display the selected symbol in the 'Value'
column, but it is not updated when the selected symbol is changed.
Set the MENU_CHANGED flag, so it is updated.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Historically, the RGMII PHY modes specified in Device Trees have been
used inconsistently, often referring to the usage of delays on the PHY
side rather than describing the board; many drivers still implement this
incorrectly.
Require a comment in Devices Trees using these modes (usually mentioning
that the delay is realized on the PCB), so we can avoid adding more
incorrect uses (or will at least notice which drivers still need to be
fixed).
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/bc112b8aa510cf9df9ab33178d122f234d0aebf7.1750756583.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reorganize process_export() to eliminate duplicated code, don't look for
exports in states where we don't expect them, and don't bother with normal
state-machine processing if an export declaration has been found.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The "d_iname" member was replaced with "d_shortname.string" in the commit
referenced in the Fixes tag. This prevented the GDB script "lx-mount"
command to properly function:
(gdb) lx-mounts
mount super_block devname pathname fstype options
0xff11000002d21180 0xff11000002d24800 rootfs / rootfs rw 0 0
0xff11000002e18a80 0xff11000003713000 /dev/root / ext4 rw,relatime 0 0
Python Exception <class 'gdb.error'>: There is no member named d_iname.
Error occurred in Python: There is no member named d_iname.
Link: https://lkml.kernel.org/r/20250619225105.320729-1-florian.fainelli@broadcom.com
Fixes: 58cf9c383c ("dcache: back inline names with a struct-wrapped array of unsigned long")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The type_param regex matches "@..." just fine, so the special-case branch
for that in dump_section() is never executed. Just remove it.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Rather than having other code mucking around with this bit of internal
state, encapsulate it internally. Accumulate the description as a list of
strings, joining them at the end, which is a more efficient way of building
the text.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Most of the time, testing the full range of supported Sphinx
version is a waste of time and resources. Instead, the best is
to focus at the versions that are actually shipped by major
distros.
For it to work properly, we need to adjust the requirements for
them to start from first patch for each distro after the
minimal supported one. The requirements were re-adjusted to
avoid build breakages related to version incompatibilities.
Such builds were tested with:
./scripts/test_doc_build.py -m -a "SPHINXOPTS=-j8" "SPHINXDIRS=networking netlink/specs" --full
Change the logic to pick by default only such versions, adding
another parameter to do a comprehensive test.
While here, improve the script documentation to make it easier
to be used.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/a2b9b7775a185766643ea4b82b558de25b61d6c7.1750571906.git.mchehab+huawei@kernel.org
Move the last SPECIAL_SECTION special case into the proper handler
function, getting rid of more if/then/else logic. The leading-space
tracking was tightened up a bit in the move. Add some comments describing
what is going on.
No changes to the generated output.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250621203512.223189-10-corbet@lwn.net
Now that the function can actually fit into a human brain, add a few
comments. While I was at it, I switched to the trim_whitespace() helper
rather than open-coding it.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250621203512.223189-9-corbet@lwn.net
Separate out the end-of-comment logic into its own helper and remove the
duplicated code introduced earlier.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250621203512.223189-8-corbet@lwn.net
Move the recognition of this state to when we enter it, rather than when we
exit, eliminating some twisty logic along the way.
Some changes in output do result from this shift, generally for kerneldoc
comments that do not quite fit the format. See, for example,
struct irqdomain. As far as I can tell, the new behavior is more correct
in each case.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250621203512.223189-7-corbet@lwn.net
Merge the duplicated code back into a single implementation. Code movement
only, no logic changes.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250621203512.223189-6-corbet@lwn.net
The state known as BODY_WITH_BLANK_LINE really, in a convoluted way,
indicates a "special section" that is terminated by a blank line or the
beginning of a new section. That is either "@param: desc" sections, or the
weird "context" section that plays by the same rules.
Rename the state to SPECIAL_SECTION and split its processing into a
separate function; no real changes to the logic yet.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250621203512.223189-5-corbet@lwn.net
The BODY_MAYBE state really describes the "we are in a declaration" state.
Rename it accordingly, and split the handling of this state out from that
of the other BODY* states. This change introduces a fair amount of
duplicated code that will be coalesced in a later patch.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250621203512.223189-4-corbet@lwn.net
Pull the repeated "begin a section" logic into a single place and hide it
within the KernelEntry class.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250621203512.223189-3-corbet@lwn.net
The regex in the BODY_WITH_BLANK_LINE case was looking for lines starting
with " * ", where exactly one space was allowed before the following text.
There are many kerneldoc comments where the authors have put multiple
spaces instead, leading to mis-formatting of the documentation.
Specifically, in this case, the description portion is associated with the
last of the parameters.
Allow multiple spaces in this context.
See, for example, synchronize_hardirq() and how its documentation is
formatted before and after the change.
Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250621203512.223189-2-corbet@lwn.net
In case a menu has comment without letters/numbers (eg. characters
matching the regexp '^[^[:alpha:][:digit:]]+$', for example - or *),
hitting space will cycle through those comments, rather than
selecting/deselecting the currently-highlighted option.
This is the behaviour of hitting any letter/digit: jump to the next
option which prompt starts with that letter. The only letters that
do not behave as such are 'y' 'm' and 'n'. Prompts that start with
one of those three letters are instead matched on the first letter
that is not 'y', 'm' or 'n'.
Fix that by treating 'space' as we treat y/m/n, ie. as an action key,
not as shortcut to jump to prompt.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
[masahiro: took from Buildroot, adjusted the commit subject]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bcmp() was removed in POSIX.1-2008.
This commit replaces bcmp() with memcmp(). This allows Kconfig to link
with C libraries that do not provide bcmp(), such as Android bionic
libc.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reported-by: Abhigyan Ghosh <zscript.team.zs@gmail.com>
[masahiro: update commit description]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As we always iterate through the entire die_map when expanding
type strings, recursively processing referenced types in
type_expand_child() is not actually necessary. Furthermore,
the type_string kABI rule added in commit c9083467f7
("gendwarfksyms: Add a kABI rule to override type strings") can
fail to override type strings for structures due to a missing
kabi_get_type_string() check in this function.
Fix the issue by dropping the unnecessary recursion and moving
the override check to type_expand(). Note that symbol versions
are otherwise unchanged with this patch.
Fixes: c9083467f7 ("gendwarfksyms: Add a kABI rule to override type strings")
Reported-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add some comments to process_name() to cover its broad phases of operation,
and slightly restructure the if/then/else structure to remove some early
returns.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250606163438.229916-10-corbet@lwn.net
Move two complex regexes up with the other patterns, decluttering this
function and allowing the compilation to be done once rather than for every
kerneldoc comment.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250606163438.229916-9-corbet@lwn.net
The code testing for a pointer declaration in process_name() has no actual
effect on subsequent actions; remove it.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250606163438.229916-8-corbet@lwn.net
The entry.descr value used in process_name() is not actually a member of
the KernelEntry class; it is a bit of local state. So just manage it
locally.
A trim_whitespace() helper was added to clean up the code slightly.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250606163438.229916-7-corbet@lwn.net
entry::is_kernel_comment never had anything to do with the entry itself; it
is a bit of local state in one branch of process_name(). It can, in fact,
be removed entirely; rework the code slightly so that it is no longer
needed.
No change in the rendered output.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250606163438.229916-6-corbet@lwn.net
process_name() looks for the first line of a kerneldoc comment. It
contains two nearly identical regular expressions, the second of which only
catches six cases in the kernel, all of the form:
define SOME_MACRO_NAME - description
Simply put the "define" into the regex and discard it, eliminating the loop
and the code to remove it specially.
Note that this still treats these defines as if they were functions, but
that's a separate issue.
There is no change in the generated output.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250606163438.229916-5-corbet@lwn.net
It is only used in one place, so just put the constant string
"Introduction" there so people don't have to go looking for it.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250606163438.229916-4-corbet@lwn.net
Since all of the handlers already nicely have the same prototype, put them
into a table and call them from there and take out the extended
if-then-else series.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250606163438.229916-3-corbet@lwn.net
The support for dropping "_noprof" missed dropping the suffix from
exported symbols. That meant that using the :export: feature would
look for kernel-doc for (eg) krealloc_noprof() and not find the
kernel-doc for krealloc().
Fixes: 51a7bf0238 (scripts/kernel-doc: drop "_noprof" on function prototypes)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250606141543.1285671-1-willy@infradead.org
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which exports a
symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
-----BEGIN PGP SIGNATURE-----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=Dy49
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
Enumeration constants read from a symbol reference file can incorrectly
affect new enumeration constants parsed from an actual input file.
Example:
$ cat test.c
enum { E_A, E_B, E_MAX };
struct bar { int mem[E_MAX]; };
int foo(struct bar *a) {}
__GENKSYMS_EXPORT_SYMBOL(foo);
$ cat test.c | ./scripts/genksyms/genksyms -T test.0.symtypes
#SYMVER foo 0x070d854d
$ cat test.0.symtypes
E#E_MAX 2
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
$ cat test.c | ./scripts/genksyms/genksyms -T test.1.symtypes -r test.0.symtypes
<stdin>:4: warning: foo: modversion changed because of changes in enum constant E_MAX
#SYMVER foo 0x9c9dfd81
$ cat test.1.symtypes
E#E_MAX ( 2 ) + 3
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
The __add_symbol() function includes logic to handle the incrementation of
enumeration values, but this code is also invoked when reading a reference
file. As a result, the variables last_enum_expr and enum_counter might be
incorrectly set after reading the reference file, which later affects
parsing of the actual input.
Fix the problem by splitting the logic for the incrementation of
enumeration values into a separate function process_enum() and call it from
__add_symbol() only when processing non-reference data.
Fixes: e37ddb8250 ("genksyms: Track changes to enum constants")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the normal
constant forward progress of new device support and cleanups to existing
subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet, xillybus,
cardreader drivers, fastrpc and others.)
All of these have been in linux-next for quite a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaEKg5Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykUyACgmAzrzKMoQUwwhQ6ed2l7tHdrlOcAoIORI1/x
pNqQdrE1EbmAAyl47IN4
=ts6J
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
Another issue with <linux/export.h> is that it is sometimes included
even when EXPORT_SYMBOL() is not used at all.
Some headers (e.g. include/linux/linkage.h>) cannot be fixed for now
for the reason described in the previous commit.
This commit adds a warning for *.c files that include <linux/export.h>
but do not use EXPORT_SYMBOL() when the kernel is built with W=1.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The problem was described in commit 5b20755b77 ("init: move THIS_MODULE
from <linux/export.h> to <linux/init.h>").
To summarize it again here: <linux/export.h> is included by most C files,
even though only some of them actually export symbols. This is because
some headers, such as include/linux/{module.h,linkage}, needlessly
include <linux/export.h>.
I have added a more detailed explanation in the comments of
scripts/misc-check.
This problem will be fixed in two steps:
1. Add #include <linux/export.h> directly to C files that use
EXPORT_SYMBOL()
2. Remove #include <linux/export.h> from header files that do not use
EXPORT_SYMBOL()
This commit addresses step 1; scripts/misc-check will warn about *.[ch]
files that use EXPORT_SYMBOL() but do not include <linux/export.h>.
This check is only triggered when the kernel is built with W=1.
We need to fix 4000+ files. I hope others will help with this effort.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This script is executed only when ${KBUILD_EXTRA_WARN} contains 1.
Move this check to the top-level Makefile to allow more checks to be
easily added to this script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Some ctags implementations are available. With this change, You can
specify your favorite one with CTAGS environment variable.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, menu->prompt->type is checked to distinguish "comment"
(P_COMMENT) and "menu" (P_MENU) entries from regular "config" entries.
This is odd because P_COMMENT and P_MENU are not properties.
This commit introduces menu type enum to distinguish menu types more
naturally.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will be
checked, thus one can now easily catch errors when e.g. using the
'?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel' crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>' if
'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant
'len <= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed in
the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer' to
delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a dependency
for memory backing feature of the Rust null block driver, which is
waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the Rust
subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the pointer
passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time check
of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of 'assert_pinned!'
(so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=JRqL
-----END PGP SIGNATURE-----
Merge tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will
be checked, thus one can now easily catch errors when e.g. using
the '?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel'
crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>'
if 'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant 'len
<= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed
in the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer'
to delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a
dependency for memory backing feature of the Rust null block
driver, which is waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the
Rust subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the
pointer passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time
check of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of
'assert_pinned!' (so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements"
* tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (78 commits)
rust: list: Fix typo `much` in arc.rs
rust: check type of `$ptr` in `container_of!`
rust: workqueue: remove HasWork::OFFSET
rust: retain pointer mut-ness in `container_of!`
Documentation: rust: testing: add docs on the new KUnit `#[test]` tests
Documentation: rust: rename `#[test]`s to "`rusttest` host tests"
rust: str: take advantage of the `-> Result` support in KUnit `#[test]`'s
rust: str: simplify KUnit tests `format!` macro
rust: str: convert `rusttest` tests into KUnit
rust: add `kunit_tests` to the prelude
rust: kunit: support checked `-> Result`s in KUnit `#[test]`s
rust: kunit: support KUnit-mapped `assert!` macros in `#[test]`s
rust: make section names plural
rust: list: fix path of `assert_pinned!`
rust: compile libcore with edition 2024 for 1.87+
rust: dma: add missing Markdown code span
rust: task: add missing Markdown code spans and intra-doc links
rust: pci: fix docs related to missing Markdown code spans
rust: alloc: add missing Markdown code span
rust: alloc: add missing Markdown code spans
...
Sergey Senozhatsky adds infrastructure for passing algorithm-specific
parameters into zram. A single parameter `winbits' is implemented at
this time.
- The 5 patch series "memcg: nmi-safe kmem charging" from Shakeel Butt
makes memcg charging nmi-safe, which is required by BFP, which can
operate in NMI context.
- The 5 patch series "Some random fixes and cleanup to shmem" from
Kemeng Shi implements small fixes and cleanups in the shmem code.
- The 2 patch series "Skip mm selftests instead when kernel features are
not present" from Zi Yan fixes some issues in the MM selftest code.
- The 2 patch series "mm/damon: build-enable essential DAMON components
by default" from SeongJae Park reworks DAMON Kconfig to make it easier
to enable CONFIG_DAMON.
- The 2 patch series "sched/numa: add statistics of numa balance task
migration" from Libo Chen adds more info into sysfs and procfs files to
improve visibility into the NUMA balancer's task migration activity.
- The 4 patch series "selftests/mm: cow and gup_longterm cleanups" from
Mark Brown provides various updates to some of the MM selftests to make
them play better with the overall containing framework.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDzA9wAKCRDdBJ7gKXxA
js8sAP9V3COg+vzTmimzP3ocTkkbbIJzDfM6nXpE2EQ4BR3ejwD+NsIT2ZLtTF6O
LqAZpgO7ju6wMjR/lM30ebCq5qFbZAw=
=oruw
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "zram: support algorithm-specific parameters" from Sergey Senozhatsky
adds infrastructure for passing algorithm-specific parameters into
zram. A single parameter `winbits' is implemented at this time.
- "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg
charging nmi-safe, which is required by BFP, which can operate in NMI
context.
- "Some random fixes and cleanup to shmem" from Kemeng Shi implements
small fixes and cleanups in the shmem code.
- "Skip mm selftests instead when kernel features are not present" from
Zi Yan fixes some issues in the MM selftest code.
- "mm/damon: build-enable essential DAMON components by default" from
SeongJae Park reworks DAMON Kconfig to make it easier to enable
CONFIG_DAMON.
- "sched/numa: add statistics of numa balance task migration" from Libo
Chen adds more info into sysfs and procfs files to improve visibility
into the NUMA balancer's task migration activity.
- "selftests/mm: cow and gup_longterm cleanups" from Mark Brown
provides various updates to some of the MM selftests to make them
play better with the overall containing framework.
* tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (43 commits)
mm/khugepaged: clean up refcount check using folio_expected_ref_count()
selftests/mm: fix test result reporting in gup_longterm
selftests/mm: report unique test names for each cow test
selftests/mm: add helper for logging test start and results
selftests/mm: use standard ksft_finished() in cow and gup_longterm
selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled
sched/numa: add statistics of numa balance task
sched/numa: fix task swap by skipping kernel threads
tools/testing: check correct variable in open_procmap()
tools/testing/vma: add missing function stub
mm/gup: update comment explaining why gup_fast() disables IRQs
selftests/mm: two fixes for the pfnmap test
mm/khugepaged: fix race with folio split/free using temporary reference
mm: add CONFIG_PAGE_BLOCK_ORDER to select page block order
mmu_notifiers: remove leftover stub macros
selftests/mm: deduplicate test names in madv_populate
kcov: rust: add flags for KCOV with Rust
mm: rust: make CONFIG_MMU ifdefs more narrow
mmu_gather: move tlb flush for VM_PFNMAP/VM_MIXEDMAP vmas into free_pgtables()
mm/damon/Kconfig: enable CONFIG_DAMON by default
...
- randstruct: gcc-plugin: Fix attribute addition with GCC 15
- ubsan: integer-overflow: depend on BROKEN to keep this out of CI
- overflow: Introduce __DEFINE_FLEX for having no initializer
- wifi: iwlwifi: mld: Work around Clang loop unrolling bug
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaDx5RgAKCRA2KwveOeQk
u4KjAP9tpSeAc2cKb2ZeuVV2dVSf689jR/fxPbgyy2yWIJrPogD/bsFs+LTCXnwB
/Rk838ZZJEB0eXKoKk/LKmaN2UMSMgQ=
=6m7/
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.16-rc1-fix1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- randstruct: gcc-plugin: Fix attribute addition with GCC 15
- ubsan: integer-overflow: depend on BROKEN to keep this out of CI
- overflow: Introduce __DEFINE_FLEX for having no initializer
- wifi: iwlwifi: mld: Work around Clang loop unrolling bug
[ Take two after a jump scare due to some repo rewriting by 'b4' - Linus ]
* tag 'hardening-v6.16-rc1-fix1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: gcc-plugin: Fix attribute addition
overflow: Introduce __DEFINE_FLEX for having no initializer
ubsan: integer-overflow: depend on BROKEN to keep this out of CI
wifi: iwlwifi: mld: Work around Clang loop unrolling bug
Based on changes in the 2021 public version of the randstruct
out-of-tree GCC plugin[1], more carefully update the attributes on
resulting decls, to avoid tripping checks in GCC 15's
comptypes_check_enum_int() when it has been configured with
"--enable-checking=misc":
arch/arm64/kernel/kexec_image.c:132:14: internal compiler error: in comptypes_check_enum_int, at c/c-typeck.cc:1519
132 | const struct kexec_file_ops kexec_image_ops = {
| ^~~~~~~~~~~~~~
internal_error(char const*, ...), at gcc/gcc/diagnostic-global-context.cc:517
fancy_abort(char const*, int, char const*), at gcc/gcc/diagnostic.cc:1803
comptypes_check_enum_int(tree_node*, tree_node*, bool*), at gcc/gcc/c/c-typeck.cc:1519
...
Link: https://archive.org/download/grsecurity/grsecurity-3.1-5.10.41-202105280954.patch.gz [1]
Reported-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Closes: https://github.com/KSPP/linux/issues/367
Closes: https://lore.kernel.org/lkml/20250530000646.104457-1-thiago.bauermann@linaro.org/
Reported-by: Ingo Saitz <ingo@hannover.ccc.de>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1104745
Fixes: 313dd1b629 ("gcc-plugins: Add the randstruct plugin")
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Link: https://lore.kernel.org/r/20250530221824.work.623-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Rust code is currently not instrumented properly when KCOV is enabled.
Thus, add the relevant flags to perform instrumentation correctly. This
is necessary for efficient fuzzing of Rust code.
The sanitizer-coverage features of LLVM have existed for long enough
that they are available on any LLVM version supported by rustc, so we do
not need any Kconfig feature detection. The coverage level is set to 3,
as that is the level needed by trace-pc.
We do not instrument `core` since when we fuzz the kernel, we are
looking for bugs in the kernel, not the Rust stdlib.
Link: https://lkml.kernel.org/r/20250501-rust-kcov-v2-1-b71e83e9779f@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Aleksandr Nogikh <nogikh@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
semaphore" from Lance Yang enhances the hung task detector. The
detector presently dumps the blocking tasks's stack when it is blocked
on a mutex. Lance's series extends this to semaphores.
- The 2 patch series "nilfs2: improve sanity checks in dirty state
propagation" from Wentao Liang addresses a couple of minor flaws in
nilfs2.
- The 2 patch series "scripts/gdb: Fixes related to lx_per_cpu()" from
Illia Ostapyshyn fixes a couple of issues in the gdb scripts.
- The 9 patch series "Support kdump with LUKS encryption by reusing LUKS
volume keys" from Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in the
series [0/N] cover letter.
- The 2 patch series "sysfs: add counters for lockups and stalls" from
Max Kellermann adds /sys/kernel/hardlockup_count and
/sys/kernel/hardlockup_count and /sys/kernel/rcu_stall_count.
- The 3 patch series "fork: Page operation cleanups in the fork code"
from Pasha Tatashin implements a number of code cleanups in fork.c.
- The 3 patch series "scripts/gdb/symbols: determine KASLR offset on
s390 during early boot" from Ilya Leoshkevich fixes some s390 issues in
the gdb scripts.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDuCvQAKCRDdBJ7gKXxA
jrkxAQCnFAp/uK9ckkbN4nfpJ0+OMY36C+A+dawSDtuRsIkXBAEAq3e6MNAUdg5W
Ca0cXdgSIq1Op7ZKEA+66Km6Rfvfow8=
=g45L
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
x86 already uses gcc-8 as the minimum version, this changes all other
architectures to the same version. gcc-8 is used is Debian 10 and Red
Hat Enterprise Linux 8, both of which are still supported, and binutils
2.30 is the oldest corresponding version on those. Ubuntu Pro 18.04 and
SUSE Linux Enterprise Server 15 both use gcc-7 as the system compiler
but additionally include toolchains that remain supported.
With the new minimum toolchain versions, a number of workarounds for older
versions can be dropped, in particular on x86_64 and arm64. Importantly,
the updated compiler version allows removing two of the five remaining
gcc plugins, as support for sancov and structeak features is already
included in modern compiler versions.
I tried collecting the known changes that are possible based on the
new toolchain version, but expect that more cleanups will be possible.
Since this touches multiple architectures, I merged the patches through
the asm-generic tree.
-----BEGIN PGP SIGNATURE-----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=pdDC
-----END PGP SIGNATURE-----
Merge tag 'gcc-minimum-version-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull compiler version requirement update from Arnd Bergmann:
"Require gcc-8 and binutils-2.30
x86 already uses gcc-8 as the minimum version, this changes all other
architectures to the same version. gcc-8 is used is Debian 10 and Red
Hat Enterprise Linux 8, both of which are still supported, and
binutils 2.30 is the oldest corresponding version on those.
Ubuntu Pro 18.04 and SUSE Linux Enterprise Server 15 both use gcc-7 as
the system compiler but additionally include toolchains that remain
supported.
With the new minimum toolchain versions, a number of workarounds for
older versions can be dropped, in particular on x86_64 and arm64.
Importantly, the updated compiler version allows removing two of the
five remaining gcc plugins, as support for sancov and structeak
features is already included in modern compiler versions.
I tried collecting the known changes that are possible based on the
new toolchain version, but expect that more cleanups will be possible.
Since this touches multiple architectures, I merged the patches
through the asm-generic tree."
* tag 'gcc-minimum-version-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
Makefile.kcov: apply needed compiler option unconditionally in CFLAGS_KCOV
Documentation: update binutils-2.30 version reference
gcc-plugins: remove SANCOV gcc plugin
Kbuild: remove structleak gcc plugin
arm64: drop binutils version checks
raid6: skip avx512 checks
kbuild: require gcc-8 and binutils-2.30
* Add large stage-2 mapping (THP) support for non-protected guests when
pKVM is enabled, clawing back some performance.
* Enable nested virtualisation support on systems that support it,
though it is disabled by default.
* Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
* Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is automatically
extracted from the published JSON files), and helps dealing with the
evolution of the architecture.
* Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
* New selftest checking the pKVM ownership transition rules
* Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
* Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
* Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
* Add a new selftest for the SVE host state being corrupted by a
guest.
* Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
* Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
* Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
* and the usual random cleanups.
LoongArch:
* Don't flush tlb if the host supports hardware page table walks.
* Add KVM selftests support.
RISC-V:
* Add vector registers to get-reg-list selftest
* VCPU reset related improvements
* Remove scounteren initialization from VCPU reset
* Support VCPU reset from userspace using set_mpstate() ioctl
x86:
* Initial support for TDX in KVM. This finally makes it possible to use the
TDX module to run confidential guests on Intel processors. This is quite a
large series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some TDVMCALLs
to userspace, and handling several special VM exits from the TDX module.
This has been in the works for literally years and it's not really possible
to describe everything here, so I'll defer to the various merge commits
up to and including commit 7bcf7246c4 ("Merge branch 'kvm-tdx-finish-initial'
into HEAD").
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg02hwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNnkwf/db4xeWKSMseCIvBVR+ObDn3LXhwT
hAgmTkDkP1zq9RfbfJSbUA1DXRwfP+f1sWySLMWECkFEQW9fGIJF9fOQRDSXKmhX
158U3+FEt+3jxLRCGFd4zyXAqyY3C8JSkPUyJZxCpUbXtB5tdDNac4rZAXKDULwe
sUi0OW/kFDM2yt369pBGQAGdN+75/oOrYISGOSvMXHxjccNqvveX8MUhpBjYIuuj
73iBWmsfv3vCtam56Racz3C3v44ie498PmWFtnB0R+CVfWfrnUAaRiGWx+egLiBW
dBPDiZywMn++prmphEUFgaStDTQy23JBLJ8+RvHkp+o5GaTISKJB3nedZQ==
=adZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"As far as x86 goes this pull request "only" includes TDX host support.
Quotes are appropriate because (at 6k lines and 100+ commits) it is
much bigger than the rest, which will come later this week and
consists mostly of bugfixes and selftests. s390 changes will also come
in the second batch.
ARM:
- Add large stage-2 mapping (THP) support for non-protected guests
when pKVM is enabled, clawing back some performance.
- Enable nested virtualisation support on systems that support it,
though it is disabled by default.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE
and protected modes.
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is
automatically extracted from the published JSON files), and helps
dealing with the evolution of the architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
LoongArch:
- Don't flush tlb if the host supports hardware page table walks.
- Add KVM selftests support.
RISC-V:
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
x86:
- Initial support for TDX in KVM.
This finally makes it possible to use the TDX module to run
confidential guests on Intel processors. This is quite a large
series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some
TDVMCALLs to userspace, and handling several special VM exits from
the TDX module.
This has been in the works for literally years and it's not really
possible to describe everything here, so I'll defer to the various
merge commits up to and including commit 7bcf7246c4 ('Merge
branch 'kvm-tdx-finish-initial' into HEAD')"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (248 commits)
x86/tdx: mark tdh_vp_enter() as __flatten
Documentation: virt/kvm: remove unreferenced footnote
RISC-V: KVM: lock the correct mp_state during reset
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
RISC-V: KVM: add KVM_CAP_RISCV_MP_STATE_RESET
RISC-V: KVM: Remove scounteren initialization
KVM: RISC-V: remove unnecessary SBI reset state
...
-----BEGIN PGP SIGNATURE-----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=j3t8
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
Core
----
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing
again the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter
---------
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools
still use this interface.
- Implement support for wildcard netdevice in netdev basechain
and flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF
---
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols
---------
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the single
flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API
----------
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling
-----------------
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers
----------------------
- OpenVPN virtual driver: offload OpenVPN data channels processing
to the kernel-space, increasing the data transfer throughput WRT
the user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the stearing table handling to reduce significantly
the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmg3D64SHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkcIsQAK2eEc+BxQer975wzvtMg6gF9eoex4a+
rZ7jxfDzDtNvTauoQsrpehDZp0FnySaVGCU36lHGB2OvDnhCpPc5hXzKDWQpOuqQ
SHrGG3/6FTbdTG/HfHUcbNyrUzIf53SADSObiQ3qg4gyEQ3sCpcOKtVtMcU8rvsY
/HqMnsJWFaROUMjMtCcnUSgjmeY9kBvha3sTXUqgeRugEOCvZD7z4rpqFIcQqHw7
e2Fi8dwIXEYNxqPp6MRq2qdyUTewCRruE8ZIMAFuhtfYeMElUZMPlqlMENX3AzTQ
cr0EgwcFOUxRA7oZRxhoBNBsVXavtSpQr4ZDoWplxP4aQ37n5tc1E9Q72axpB/Og
FbJRl6GvWYnCd8071BczgmfHlKaTAigPvt2Z4r6JjM5I/Bij/IZ3k+On1OTuOAj/
EqfFkdZ0a5cfKrwUMP+oSGtSAywkMVUtnIKJlZeRbjSj2432sCfe2jVAlS8ELM43
3LUgXYrAKtA87g171LlsRu5EEpI5QmqPb+i5LpPlEXe2TJEgPisyfecJ3NafF/2+
j575lm+TFNm9NTNhGGjDPEvw0djI5wSGGMe9J4gC74eWi6s5t6C4cuUf84TKWdwR
x+9H0IB7rfFncAwXHJuUUtzd+fPHaYzs5dDGbSgMQOXr1cr1wlubCK8mQ1r/Wt/a
3GjFIOQKW2Q5
=t/Tz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----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=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
- Update overflow helpers to ease refactoring of on-stack flex array
instances (Gustavo A. R. Silva, Kees Cook)
- lkdtm: Use SLAB_NO_MERGE instead of constructors (Harry Yoo)
- Simplify CONFIG_CC_HAS_COUNTED_BY (Jan Hendrik Farr)
- Disable u64 usercopy KUnit test on 32-bit SPARC (Thomas Weißschuh)
- Add missed designated initializers now exposed by fixed randstruct
(Nathan Chancellor, Kees Cook)
- Document compilers versions for __builtin_dynamic_object_size
- Remove ARM_SSP_PER_TASK GCC plugin
- Fix GCC plugin randstruct, add selftests, and restore COMPILE_TEST
builds
- Kbuild: induce full rebuilds when dependencies change with GCC plugins,
the Clang sanitizer .scl file, or the randstruct seed.
- Kbuild: Switch from -Wvla to -Wvla-larger-than=1
- Correct several __nonstring uses for -Wunterminated-string-initialization
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaDUq9gAKCRA2KwveOeQk
u+ZCAQDhqpOE/yn5gfjyplIvaTtzj9CaW6g11AmPYrimJCuj3QD9G+0o35kzlXOw
f0ZIj2U7LFNgbLos+20hQwhMFf1Zhgg=
=OYzD
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Update overflow helpers to ease refactoring of on-stack flex array
instances (Gustavo A. R. Silva, Kees Cook)
- lkdtm: Use SLAB_NO_MERGE instead of constructors (Harry Yoo)
- Simplify CONFIG_CC_HAS_COUNTED_BY (Jan Hendrik Farr)
- Disable u64 usercopy KUnit test on 32-bit SPARC (Thomas Weißschuh)
- Add missed designated initializers now exposed by fixed randstruct
(Nathan Chancellor, Kees Cook)
- Document compilers versions for __builtin_dynamic_object_size
- Remove ARM_SSP_PER_TASK GCC plugin
- Fix GCC plugin randstruct, add selftests, and restore COMPILE_TEST
builds
- Kbuild: induce full rebuilds when dependencies change with GCC
plugins, the Clang sanitizer .scl file, or the randstruct seed.
- Kbuild: Switch from -Wvla to -Wvla-larger-than=1
- Correct several __nonstring uses for -Wunterminated-string-initialization
* tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
Revert "hardening: Disable GCC randstruct for COMPILE_TEST"
lib/tests: randstruct: Add deep function pointer layout test
lib/tests: Add randstruct KUnit test
randstruct: gcc-plugin: Remove bogus void member
net: qede: Initialize qede_ll_ops with designated initializer
scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops
md/bcache: Mark __nonstring look-up table
integer-wrap: Force full rebuild when .scl file changes
randstruct: Force full rebuild when seed changes
gcc-plugins: Force full rebuild when plugins change
kbuild: Switch from -Wvla to -Wvla-larger-than=1
hardening: simplify CONFIG_CC_HAS_COUNTED_BY
overflow: Fix direct struct member initialization in _DEFINE_FLEX()
kunit/overflow: Add tests for STACK_FLEX_ARRAY_SIZE() helper
overflow: Add STACK_FLEX_ARRAY_SIZE() helper
input/joystick: magellan: Mark __nonstring look-up table const
watchdog: exar: Shorten identity name to fit correctly
mod_devicetable: Enlarge the maximum platform_device_id name length
overflow: Clarify expectations for getting DEFINE_FLEX variable sizes
compiler_types: Identify compiler versions for __builtin_dynamic_object_size
...
This just converts the 'cc-disable-warning' uses in the generic makefile
extrawarn script to use the plain 'cc-option' form instead. Partly to
clean things up, and partly just to have the new form get some proper
test coverage.
I'll leave the various random other uses of 'cc-disable-warning' alone
and let subsystem maintainers decide if they want to convert to the new
unified model.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the follow-up to commit a79be02bba ("Fix mis-uses of
'cc-option' for warning disablement") where I mentioned that the best
fix would be to just make 'cc-option' a bit smarter, and work for all
compiler options, including the '-Wno-xyzzy' pattern that it used to
accept unknown options for.
It turns out that fixing cc-option is pretty straightforward: just
rewrite any '-Wno-xyzzy' option pattern to use '-Wxyzzy' instead for
testing.
That makes the whole artificial distinction between 'cc-option' and
'cc-disable-warning' go away, and we can happily forget about the odd
build rule that you have to treat compiler options that disable warnings
specially.
The 'cc-disable-warning' helper remains as a backwards compatibility
syntax for now, but is implemented in terms of the new and improved
cc-option.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- The most significant change is the replacement of the old kernel-doc
script (a monstrous collection of Perl regexes that predates the Git era)
with a Python reimplementation. That, too, is a horrifying collection of
regexes, but in a much cleaner and more maintainable structure that
integrates far better with the Sphinx build system.
This change has been in linux-next for the full 6.15 cycle; the small
number of problems that turned up have been addressed, seemingly to
everybody's satisfaction. The Perl kernel-doc script remains in tree (as
scripts/kernel-doc.pl) and can be used with a command-line option if need
be. Unless some reason to keep it around materializes, it will probably
go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmg0j/IPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yu7sH/1w2LtO8XB/KTRNmuz3tV6KzGtDvQVwqgxB2
X8bbeJlBtYenvuak66RjCfucOh7Y8Ni3UN0G2BGa67KBAxmZEYc6u+IF4SrJUg5g
DuS6+ZXgqV4TrjWMRof5LtPS8KbNJLGnqgxSVdEPSBV0jJ13r3gb3/e7X06iNAKR
X4Nq+h5aa1tCwZTkPOSHHQn4qm3Tb1LQreDSn8gnBn6e8nVJIakNlwaVYkClhI9B
byvItInv32LPAXPDkcEWITvLNUTiMobTyfBYHOD6i3nImQ+j4ZiMMmOUjiB+0jDO
UQDvoUa46ipXkLBsBOrYEkM/iKXBawMwTa3CcudxR4scvVgATJs=
=BQ9X
-----END PGP SIGNATURE-----
Merge tag 'docs-6.16' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A moderately busy cycle for documentation this time around:
- The most significant change is the replacement of the old
kernel-doc script (a monstrous collection of Perl regexes that
predates the Git era) with a Python reimplementation. That, too, is
a horrifying collection of regexes, but in a much cleaner and more
maintainable structure that integrates far better with the Sphinx
build system.
This change has been in linux-next for the full 6.15 cycle; the
small number of problems that turned up have been addressed,
seemingly to everybody's satisfaction. The Perl kernel-doc script
remains in tree (as scripts/kernel-doc.pl) and can be used with a
command-line option if need be. Unless some reason to keep it
around materializes, it will probably go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc"
* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
Docs: doc-guide: update sphinx.rst Sphinx version number
docs: doc-guide: clarify latest theme usage
Documentation/scheduler: Fix typo in sched-stats domain field description
scripts: kernel-doc: prevent a KeyError when checking output
docs: kerneldoc.py: simplify exception handling logic
MAINTAINERS: update linux-doc entry to cover new Python scripts
docs: align with scripts/syscall.tbl migration
Documentation: NTB: Fix typo
Documentation: ioctl-number: Update table intro
docs: conf.py: drop backward support for old Sphinx versions
Docs: driver-api/basics: add kobject_event interfaces
Docs: relay: editing cleanups
docs: fix "incase" typo in coresight/panic.rst
Fix spelling error for 'parallel'
docs: admin-guide: fix typos in reporting-issues.rst
docs: dmaengine: add explanation for DMA_ASYNC_TX capability
Documentation: leds: improve readibility of multicolor doc
docs: fix typo in firmware-related section
docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
Documentation: ioctl-number: Update outdated submission info
...
Boot code changes:
- A large series of changes to reorganize the x86 boot code into a better isolated
and easier to maintain base of PIC early startup code in arch/x86/boot/startup/,
by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86 boot code
reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S. Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish, Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix CONFIG_HARDENED_USERCOPY=y
(Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary (Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo Molnar)
- Make smp_text_poke_batch_process() subsume smp_text_poke_batch_finish()
(Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs (David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>
(Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy Shevchenko,
Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav Petkov, Chang S. Bae,
Chao Gao, Dan Williams, Dave Hansen, David Kaplan, David Woodhouse,
Eric Biggers, Ingo Molnar, Josh Poimboeuf, Juergen Gross, Malaya Kumar Rout,
Mario Limonciello, Nathan Chancellor, Oleg Nesterov, Pawan Gupta,
Peter Zijlstra, Shivank Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak,
Xin Li)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JgQo
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
Summary of changes:
- Removed swake_up_one_online() workaround
- Reverted an incorrect rcuog wake-up fix from offline softirq
- Rust RCU Guard methods marked as inline
- Updated MAINTAINERS with Joel’s and Zqiang's new email address
- Replaced magic constant in rcu_seq_done_exact() with named constant
- Added warning mechanism to validate rcu_seq_done_exact()
- Switched SRCU polling API to use rcu_seq_done_exact()
- Commented on redundant delta check in rcu_seq_done_exact()
- Made ->gpwrap tests in rcutorture more frequent
- Fixed reuse of ARM64 images in rcutorture
- rcutorture improved to check Kconfig and reader conflict handling
- Extracted logic from rcu_torture_one_read() for clarity
- Updated LWN RCU API documentation links
- Enabled --do-rt in torture.sh for CONFIG_PREEMPT_RT
- Added tests for SRCU up/down reader primitives
- Added comments and delays checks in rcutorture
- Deprecated srcu_read_lock_lite() and srcu_read_unlock_lite() via checkpatch
- Added --do-normal and --do-no-normal to torture.sh
- Added RCU Rust binding tests to torture.sh
- Reduced CPU overcommit and removed MAXSMP/CPUMASK_OFFSTACK in TREE01
- Replaced kmalloc() with kcalloc() in rcuscale
- Refined listRCU example code for stale data elimination
- Fixed hardirq count bug for x86 in cpu_stall_cputime
- Added safety checks in rcu/nocb for offloaded rdp access
- Other miscellaneous changes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEcoCIrlGe4gjE06JJqA4nf2o45hAFAmgoF5oACgkQqA4nf2o4
5hDvVw//TNsJ/g0HTMu02uXMmtFIrgvpTnH7OEGJ+2p/KErrmWYsBJQw41ueLAQL
Drtq3q9888UFF5LLA43HC88DFmT9uV8V8TmmURH+pZWdmJY1Ekn8UBSBhDPGGpC5
sGIO2jJKjHN8G7fyJKoPtL9jxKSulHF/XQTIL2pP23jopAIwosoCHVAwGvnGVvBC
smXfMSu+bd3IifNFroodsqjVXgnNQwWUNboOkz0KfkiiosgZsWWW8DaM3NGjdp+C
tUHLs1zfC6sgJUjdpokTE3TcNudlMgVlB2Quj5jhh1YvsvedgIJXl4wpR6JVutyN
F9awKt1AZkyZ+cTp+JpohaWaN9aKfNNG7jZ+rxQ0VcuRh35wmBJtiWNjEtJ38R82
kTC1RI7MEus+6OZRt92jv5TNSa9t3wHbi5fBjNRiQ8PYq5cibZy7Lyrj2JOK7Zqs
pgmdUnhQH2Uhf52b+clG5hWO55gEtACY8pin6kNewClcRtz04Jew7gkiYDGka4F4
EXbuDHSWi25eSb3FzT2BqR72OZcJ0kv747OTp+2yTv2TaBA5p+OD8hvL/WbWC2Ok
DK1YQ4RgEerTSZ4PbgPtWkNnlf6xjdWBaYNwmo+G/DgfjPoTOy1Jp73Z4b1AqSB5
IPEQy1d/799QgGTYkbrvRtvWHg8yfOMz3ByZoHg31rafr0AsrXM=
=6mun
-----END PGP SIGNATURE-----
Merge tag 'next.2025.05.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Joel Fernandes:
- Removed swake_up_one_online() workaround
- Reverted an incorrect rcuog wake-up fix from offline softirq
- Rust RCU Guard methods marked as inline
- Updated MAINTAINERS with Joel’s and Zqiang's new email address
- Replaced magic constant in rcu_seq_done_exact() with named constant
- Added warning mechanism to validate rcu_seq_done_exact()
- Switched SRCU polling API to use rcu_seq_done_exact()
- Commented on redundant delta check in rcu_seq_done_exact()
- Made ->gpwrap tests in rcutorture more frequent
- Fixed reuse of ARM64 images in rcutorture
- rcutorture improved to check Kconfig and reader conflict handling
- Extracted logic from rcu_torture_one_read() for clarity
- Updated LWN RCU API documentation links
- Enabled --do-rt in torture.sh for CONFIG_PREEMPT_RT
- Added tests for SRCU up/down reader primitives
- Added comments and delays checks in rcutorture
- Deprecated srcu_read_lock_lite() and srcu_read_unlock_lite() via checkpatch
- Added --do-normal and --do-no-normal to torture.sh
- Added RCU Rust binding tests to torture.sh
- Reduced CPU overcommit and removed MAXSMP/CPUMASK_OFFSTACK in TREE01
- Replaced kmalloc() with kcalloc() in rcuscale
- Refined listRCU example code for stale data elimination
- Fixed hardirq count bug for x86 in cpu_stall_cputime
- Added safety checks in rcu/nocb for offloaded rdp access
- Other miscellaneous changes
* tag 'next.2025.05.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (27 commits)
rcutorture: Fix issue with re-using old images on ARM64
rcutorture: Remove MAXSMP and CPUMASK_OFFSTACK from TREE01
rcutorture: Reduce TREE01 CPU overcommit
torture: Check for "Call trace:" as well as "Call Trace:"
rcutorture: Perform more frequent testing of ->gpwrap
torture: Add testing of RCU's Rust bindings to torture.sh
torture: Add --do-{,no-}normal to torture.sh
checkpatch: Deprecate srcu_read_lock_lite() and srcu_read_unlock_lite()
rcutorture: Comment invocations of tick_dep_set_task()
rcu/nocb: Add Safe checks for access offloaded rdp
rcuscale: using kcalloc() to relpace kmalloc()
doc/RCU/listRCU: refine example code for eliminating stale data
doc: Update LWN RCU API links in whatisRCU.rst
Revert "rcu/nocb: Fix rcuog wake-up from offline softirq"
rust: sync: rcu: Mark Guard methods as inline
rcu/cpu_stall_cputime: fix the hardirq count for x86 architecture
rcu: Remove swake_up_one_online() bandaid
MAINTAINERS: Update Zqiang's email address
rcutorture: Make torture.sh --do-rt use CONFIG_PREEMPT_RT
srcu: Use rcu_seq_done_exact() for polling API
...
* New features:
- Add large stage-2 mapping support for non-protected pKVM guests,
clawing back some performance.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
- Enable nested virtualisation support on systems that support it
(yes, it has been a long time coming), though it is disabled by
default.
* Improvements, fixes and cleanups:
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. This ensures correctness of
emulation (the data is automatically extracted from the published
JSON files), and helps dealing with the evolution of the
architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
-----BEGIN PGP SIGNATURE-----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=Jju3
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.16
* New features:
- Add large stage-2 mapping support for non-protected pKVM guests,
clawing back some performance.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
- Enable nested virtualisation support on systems that support it
(yes, it has been a long time coming), though it is disabled by
default.
* Improvements, fixes and cleanups:
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. This ensures correctness of
emulation (the data is automatically extracted from the published
JSON files), and helps dealing with the evolution of the
architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
Rust 1.87 (released on 2025-05-15) compiles core library with edition
2024 instead of 2021 [1]. Ensure that the edition matches libcore's
expectation to avoid potential breakage.
[ J3m3 reported in Zulip [2] that the `rust-analyzer` target was
broken after this patch -- indeed, we need to avoid `core-cfgs`
since those are passed to the `rust-analyzer` target.
So, instead, I tweaked the patch to create a new `core-edition`
variable and explicitly mention the `--edition` flag instead of
reusing `core-cfg`s.
In addition, pass a new argument using this new variable to
`generate_rust_analyzer.py` so that we set the right edition there.
By the way, for future reference: the `filter-out` change is needed
for Rust < 1.87, since otherwise we would skip the `--edition=2021`
we just added, ending up with no edition flag, and thus the compiler
would default to the 2015 one.
[2] https://rust-for-linux.zulipchat.com/#narrow/channel/291565/topic/x/near/520206547
- Miguel ]
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/138162 [1]
Reported-by: est31 <est31@protonmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1163
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250517085600.2857460-1-gary@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Explicitly adding MODULE_IMPORT_NS("module:...") is not allowed.
Currently, this is only checked at run time. That is, when such a
module is loaded, an error message like the following is shown:
foo: module tries to import module namespace: module:bar
Obviously, checking this at compile time improves usability.
In such a case, modpost will report the following error at compile time:
ERROR: modpost: foo: explicitly importing namespace "module:bar" is not allowed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/Makefile.lib is included by the following Makefiles:
scripts/Makefile.build
scripts/Makefile.modfinal
scripts/Makefile.package
scripts/Makefile.vmlinux
scripts/Makefile.vmlinux_o
However, the last four do not need to process Kbuild syntax such as
obj-*, lib-*, subdir-*, etc.
Move the relevant code to scripts/Makefile.build.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas.schier@linux.dev>
In rare situations where distributions must make significant
changes to otherwise opaque data structures that have
inadvertently been included in the published ABI, keeping
symbol versions stable using the existing kABI macros can
become tedious.
For example, Android decided to switch to a newer io_uring
implementation in the 5.10 GKI kernel "to resolve a huge number
of potential, and known, problems with the codebase," requiring
"horrible hacks" with genksyms:
"A number of the io_uring structures get used in other core
kernel structures, only as "opaque" pointers, so there is
not any real ABI breakage. But, due to the visibility of
the structures going away, the CRC values of many scheduler
variables and functions were changed."
-- https://r.android.com/2425293
While these specific changes probably could have been hidden
from gendwarfksyms using the existing kABI macros, this may not
always be the case.
Add a last resort kABI rule that allows distribution
maintainers to fully override a type string for a symbol or a
type. Also add a more informative error message in case we find
a non-existent type references when calculating versions.
Suggested-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
A data structure can be partially opaque to modules if its
allocation is handled by the core kernel, and modules only need
to access some of its members. In this situation, it's possible
to append new members to the structure without breaking the ABI,
as long as the layout for the original members remains unchanged.
For example, consider the following struct:
struct s {
unsigned long a;
void *p;
};
gendwarfksyms --stable --dump-dies produces the following type
expansion:
variable structure_type s {
member base_type long unsigned int byte_size(8) encoding(7) a
data_member_location(0) ,
member pointer_type {
base_type void
} byte_size(8) p data_member_location(8)
} byte_size(16)
To append new members, we can use the KABI_IGNORE() macro to
hide them from gendwarfksyms --stable:
struct s {
/* old members with unchanged layout */
unsigned long a;
void *p;
/* new members not accessed by modules */
KABI_IGNORE(0, unsigned long n);
};
However, we can't hide the fact that adding new members changes
the struct size, as seen in the updated type string:
variable structure_type s {
member base_type long unsigned int byte_size(8) encoding(7) a
data_member_location(0) ,
member pointer_type {
base_type void
} byte_size(8) p data_member_location(8)
} byte_size(24)
In order to support this use case, add a kABI rule that makes it
possible to override the byte_size attribute for types:
/*
* struct s allocation is handled by the kernel, so
* appending new members without changing the original
* layout won't break the ABI.
*/
KABI_BYTE_SIZE(s, 16);
This results in a type string that's unchanged from the original
and therefore, won't change versions for symbols that reference
the changed structure.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reduce code duplication by moving kABI rule look-ups to separate
functions.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Instead of only accepting "module:${name}", extend it with a comma
separated list of module names and add tail glob support.
That is, something like: "module:foo-*,bar" is now possible.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Designate the "module:${modname}" symbol namespace to mean: 'only
export to the named module'.
Notably, explicit imports of anything in the "module:" space is
forbidden.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Slight cleanup by using a for() loop instead of while(). This makes it
clearer what is the iteration and what is the actual work done.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* kvm-arm64/ubsan-el2:
: .
: Add UBSAN support to the EL2 portion of KVM, reusing most of the
: existing logic provided by CONFIG_IBSAN_TRAP.
:
: Patches courtesy of Mostafa Saleh.
: .
KVM: arm64: Handle UBSAN faults
KVM: arm64: Introduce CONFIG_UBSAN_KVM_EL2
ubsan: Remove regs from report_ubsan_failure()
arm64: Introduce esr_is_ubsan_brk()
Signed-off-by: Marc Zyngier <maz@kernel.org>
Macros and auto-generated code should use absolute paths, `::core::...`
and `::kernel::...`, for core and kernel references.
This prevents issues where user-defined modules named `core` or `kernel`
could be picked up instead of the `core` or `kernel` crates.
Thus clean some references up.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Closes: https://github.com/Rust-for-Linux/linux/issues/1150
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250519164615.3310844-1-igor.korotin.linux@gmail.com
[ Applied `rustfmt`. Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Using lx-symbols during s390 early boot fails with:
Error occurred in Python: 'utf-8' codec can't decode byte 0xcb in position 0: invalid continuation byte
The reason is that s390 decompressor's startup_kernel() does not create
vmcoreinfo note, and sets vmcore_info to kernel's physical base. This
confuses get_vmcore_s390().
Fix by handling this special case. Extract vm_layout.kaslr_offset from
the kernel image in physical memory, which is placed there by the
decompressor using the __bootdata_preserved mechanism, and generate a
synthetic vmcoreinfo note from it.
Link: https://lkml.kernel.org/r/20250515155811.114392-4-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move the code that turns off pagination into a separate function. It will
be useful later in order to prevent hangs when loading symbols for kernel
image in physical memory during s390 early boot.
Link: https://lkml.kernel.org/r/20250515155811.114392-3-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "scripts/gdb/symbols: determine KASLR offset on s390 during
early boot".
I noticed that debugging s390 early boot using the support I introduced in
commit 28939c3e99 ("scripts/gdb/symbols: determine KASLR offset on
s390") does not work.
The reason is that decompressor does not provide the vmcoreinfo note, so
KASLR offset needs to be extracted in a different way, which this series
implements. Patches 1-2 are trivial refactorings, and patch 3 is the
implementation.
This patch (of 3):
Move the code that determines the current vmlinux file into a separate
function. It will be useful later in order to analyze the kernel image in
physical memory during s390 early boot.
Link: https://lkml.kernel.org/r/20250515155811.114392-1-iii@linux.ibm.com
Link: https://lkml.kernel.org/r/20250515155811.114392-2-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 852faf8055 ("gcc-plugins: remove SANCOV gcc plugin") removes the
config CC_HAS_SANCOV_TRACE_PC, as all supported compilers include the
compiler option '-fsanitize-coverage=trace-pc' by now.
The commit however misses the important use of this config option in
Makefile.kcov to add '-fsanitize-coverage=trace-pc' to CFLAGS_KCOV.
Include the compiler option '-fsanitize-coverage=trace-pc' unconditionally
to CFLAGS_KCOV, as all compilers provide that option now.
Fixes: 852faf8055 ("gcc-plugins: remove SANCOV gcc plugin")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If a file sent to KernelFiles.msg() method doesn't exist, instead
of producing a KeyError, output an error message.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/linux-doc/cover.1747719873.git.mchehab+huawei@kernel.org/T/#ma43ae9d8d0995b535cf5099e5381dace0410de04
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <4efa177f2157a7ec009cc197dfc2d87e6f32b165.1747817887.git.mchehab+huawei@kernel.org>
