mirror of
https://github.com/torvalds/linux.git
synced 2026-07-27 17:47:41 +02:00
master
9817 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Wang Han
|
57ad674d03 |
scripts/sorttable: Handle RISC-V patchable ftrace entries
RISC-V uses -fpatchable-function-entry=8,4 when the compressed ISA is
enabled and -fpatchable-function-entry=4,2 otherwise. In both cases, the
patchable NOP area starts 8 bytes before the function symbol address.
The __mcount_loc entries therefore point at the patchable NOP area
associated with a function, while nm reports the function symbol at the
entry address used for the function range check.
After RISC-V selected HAVE_BUILDTIME_MCOUNT_SORT, sorttable started
applying that range check at build time. Without allowing entries just
before the reported function address, the mcount sorter treats valid
RISC-V ftrace callsites as invalid weak-function entries and writes
them back as zero. The resulting kernel boots with no ftrace entries,
breaking dynamic ftrace and users such as livepatch.
The failure is silent during the final link because zeroing weak-function
entries is an expected sorttable operation. At boot, those zero entries
are skipped by ftrace_process_locs(), so the only obvious symptom is that
the vmlinux ftrace table has lost valid callsites and ftrace users cannot
attach to them.
CONFIG_FTRACE_SORT_STARTUP_TEST also reports the table as sorted in this
state: it only checks that the __mcount_loc entries are in ascending
order, which a fully zeroed table trivially satisfies. The original
commit relied on this check and did not see the regression.
On an affected RISC-V QEMU boot with both CONFIG_FTRACE_SORT_STARTUP_TEST
and CONFIG_FTRACE_STARTUP_TEST enabled, the sort check still passes
while ftrace reports zero usable entries and the early selftests fail:
[ 0.000000] ftrace section at ffffffff8101da98 sorted properly
[ 0.000000] ftrace: allocating 0 entries in 128 pages
[ 0.054999] Testing tracer function: .. no entries found ..FAILED!
[ 0.172407] tracer: function failed selftest, disabling
[ 0.178186] Failed to init function_graph tracer, init returned -19
Handle RISC-V like arm64 for the function-range check and allow
patchable entries up to 8 bytes before the function address.
With this fix, a RISC-V QEMU smoke boot with ftrace startup tests shows
the vmlinux ftrace table is populated and dynamic ftrace still works:
[ 0.000000] ftrace: allocating 46749 entries in 184 pages
[ 0.051115] Testing tracer function: PASSED
[ 1.283782] Testing dynamic ftrace: PASSED
[ 6.275456] Testing tracer function_graph: PASSED
Fixes: 0ca1724b56af ("riscv: ftrace: select HAVE_BUILDTIME_MCOUNT_SORT")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Chen Pei <cp0613@linux.alibaba.com>
Link: https://lore.kernel.org/all/20260527113028.4b21a5de@fedora/
Signed-off-by: Wang Han <wanghan@linux.alibaba.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Link: https://patch.msgid.link/20260609063002.3943001-1-wanghan@linux.alibaba.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
||
|
Linus Torvalds
|
6cc37b86f8 |
Second round of Kbuild changes for 7.2
- Link host programs with ld.lld when $(LLVM) is set to match user's expectations that LLVM will be used exclusively during the build process - Fix modpost warnings from static variable name promotion that can happen more aggressively with the recently merged distributed ThinLTO support - Add an optional warning for user-supplied Kconfig values that changed after processing, such as out of range values or options that have incorrect / missing dependencies Signed-off-by: Nathan Chancellor <nathan@kernel.org> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCajxdqwAKCRAdayaRccAa lqp7AQDoaDr7cA9voR/vx+mC2zumBEnG1CAhMEIr4zPsPjyF5AD9GA5hXQc5DR68 wMqB8Na5lB43GjJQEJxFwkPX1l8BzQU= =Ughj -----END PGP SIGNATURE----- Merge tag 'kbuild-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux Pull more Kbuild updates from Nathan Chancellor: - Link host programs with ld.lld when $(LLVM) is set to match user's expectations that LLVM will be used exclusively during the build process - Fix modpost warnings from static variable name promotion that can happen more aggressively with the recently merged distributed ThinLTO support - Add an optional warning for user-supplied Kconfig values that changed after processing, such as out of range values or options that have incorrect / missing dependencies * tag 'kbuild-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: kconfig: add optional warnings for changed input values modpost: Ignore Clang LTO suffixes in symbol matching kbuild: Use ld.lld for linking host programs when LLVM is set |
||
|
Linus Torvalds
|
dcebfd2c14 |
Rust fixes for v7.2
Toolchain and infrastructure:
- Work around a 'rustc' bug by setting the 'frame-pointer' LLVM module
flag under 'CONFIG_FRAME_POINTER'. The upcoming Rust 1.98.0 is fixed.
- Doctests: fix incorrect replacement pattern.
'kernel' crate:
- Mark 'Debug' impl as '#[inline]'.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmo76uAACgkQGXyLc2ht
IW1XLQ/8DGJd3mulDJQVFOUO53o1vNSak74MvddVeURCwbqVVy+oO7o7ZPqwpoMW
R7nosvJTw3XFGytHjSdbhLJ01P2Tv2PQHW2vHMwFeLWBW5xtZqEAwbIgGjsB7LQ5
SrRQVglnjv7nBm6TurEBRB6WgtjdL1CuzWlWpspSSYA6LtZZiH/56cOxrgMLPOeb
usK0lh0lWFozeYUCpij1L9Sc6ShKYxoKXWIgGf0fY7aChEfSM77KQ2mXaARIbVd/
iKG7pL0B3QYOdwnrUasZdasqx+yBKl8rQNDzbLKCho//HpYSDLTkNgD7AmKYNXO3
6ZltvdV/z7Jg2Ks/08ers0EgvOV6ye0DgyJD6v9gbaKeNN4dp2F38wJJylJwfX+4
N2MMNfSYFuNYBCxb54nG+p2IWWJ042opGAaPAJ4+omHT3combzAAhUIxmRglOtGD
tHx7hs16TxITWZoRjpzyQz/ManwQJuZIipwkxIMrmRHre5+n+83I+LsdL51GEBAH
bREkLsdn7k3OlZIeQaeuSSUwRYI1QaJ0FzVw5BNslq4dRA0a3hMx3qGPBU+wrYlj
AXSIsV4VJMdvf1u3578Xjm/SqAzagM0MaBjc1+HgARA++nConnazzog1CP/4GoFN
FpZBQXXn+FL3ucn5Cp7p9Uz4aftAcF9D8VohtiwP4hKTY+mWQk4=
=8FnP
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Work around a 'rustc' bug by setting the 'frame-pointer' LLVM
module flag under 'CONFIG_FRAME_POINTER'.
The upcoming Rust 1.98.0 is fixed.
- Doctests: fix incorrect replacement pattern.
'kernel' crate:
- Mark 'Debug' impl as '#[inline]'"
* tag 'rust-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: Kbuild: set frame-pointer llvm module flag for CONFIG_FRAME_POINTER
rust: doctest: fix incorrect pattern in replacement
rust: bitfield: mark `Debug` impl as `#[inline]`
|
||
|
Linus Torvalds
|
f31c00c377 |
platform-drivers-x86 for v7.2-1
Highlights:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
ACPI:
- provide acpi_bus_find_device_by_name()
alienware-wmi-base:
- Transition to new WMI API
amd: hfi:
- Support for ranking table versions
amd/hsmp:
- Clamp ioctl/send_message indices (Spectre v1)
amd/pmc:
- Add delay_suspend module parameter
- Add PMC driver support for AMD 1Ah M80H SoC
- Check for intermediate wakeup in function
- Delay suspend for some Lenovo Laptops
- Don't log during intermediate wakeups
- Use per-SoC cpu_info struct for SMU mailbox and IP info
apple-gmux:
- Drop unused assignment of pnp_device_id driver data
arm64:
- Add driver for EC found on Qualcomm reference devices
arm64: qcom-hamoa-ec:
- Fix indentation in comment tables
arm64 Use named initializers for struct i2c_device_id:
- arm64 Use named initializers for struct i2c_device_id
asus-armoury:
- add support for FX608JPR
- add support for G614PR
- add support for GA402NJ
- add support for GA403UM
asus-wmi:
- add keystone dongle support
barco-p50-gpio:
- attach software node to its target GPIO device
classmate-laptop:
- Address memory leaks on driver removal
- Convert accel driver to a platform one
- Convert ipml driver to a platform one
- Convert keys driver to a platform one
- Convert tablet driver to a platform one
- Convert v4 accel driver to a platform one
- Pass struct device pointer to helpers
- Register ACPI notify handlers directly
- Rename two helper functions
- Unify probe rollback and remove code
dell-ddv:
- Use new buffer-based WMI API
dell-descriptor:
- Use new buffer-based WMI API
dell-dw5826e:
- Add reset driver for DW5826e
dell-laptop:
- add Inspiron N5110 to touchpad LED quirk table
- fix missing cleanups in init error path
dell-privacy:
- correct CONFIG_DELL_WMI_PRIVACY macro name in comments
- Use new buffer-based WMI API
dell_rbu:
- use strscpy in image_type_write
dell-smbios-wmi:
- Use new buffer-based WMI API
dell-wmi-base:
- Use new buffer-based WMI API
docs:
- fix typo in uniwill-laptop.rst
hp-wmi:
- Add support for Omen 16-ap0xxx (8D26)
- Add support for Omen 16-ap0xxx (8E35)
- Add thermal support for board 8B2F
hwmon:
- (dell-smm) Use new buffer-based WMI API
intel-hid:
- Add HP ProBook x360 440 G1 to button_array_table
- Protect ACPI notify handler against recursion
intel/pmc:
- Add ACPI PWRM telemetry driver for Nova Lake S
- Add Nova Lake support to intel_pmc_core driver
- Add NVL PCI IDs for SSRAM telemetry discovery
- Add PMC SSRAM Kconfig description
- Add support for variable DMU offsets
- Enable Pkgc blocking residency counter
- Enable PkgC LTR blocking counter
- rate-limit LTR scale-factor warning
- Retrieve PMC info only for available PMCs
intel/pmc/ssram:
- Add ACPI discovery scaffolding
- Add PCI platform data
- Make PMT registration optional
- Refactor DEVID/PWRMBASE extraction into helper
- Rename probe and PCI ID table for consistency
- Switch to static array with per-index probe state
intel/pmc:
- Use __free() in pmc_core_punit_pmt_init()
- Use PCI DID for PMC SSRAM device discovery
intel/pmt:
- Add pre/post decode hooks around header parsing
- Cache the telemetry discovery header
intel/pmt/crashlog:
- Split init into pre-decode
intel/pmt:
- Pass discovery index instead of resource
intel/pmt/telemetry:
- Move overlap check to post-decode hook
intel/pmt:
- Unify header fetch and add ACPI source
intel/tpmi:
- convert mutex in mem_write() to guard
- use cleanup helpers in mem_write()
intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- Rename instance_id
intel/vsec:
- allocate res with intel_vsec_dev
- Restore BAR fallback for header walk
ISST:
- Restore SST-PP control to all domains
lenovo-wmi-capdata:
- Add debugfs file for dumping capdata
lenovo-wmi-helpers:
- Add helper for creating per-device debugfs dir
lenovo-wmi-other:
- Add force_load_psy_ext module parameter
- Add GPU tunable attributes
- Add missing CPU tunable attributes
- Add WMI battery charge limiting
- Rename LWMI_OM_FW_ATTR_BASE_PATH
meraki-mx100:
- use real software node references
modpost:
- Handle malformed WMI GUID strings
Move delayed work on system_dfl_wq:
- Move delayed work on system_dfl_wq
msi-ec:
- Add support for MSI Pulse GL66 12th Gen
oxpec:
- add support for OneXPlayer Super X
panasonic-laptop:
- simplify allocation of sinf
pcengines-apuv2:
- reduce indiraction in swnode assignment
pmc_atom:
- Use named initializer for pci_device_id array
sel3350-platform:
- Retain LED state on load and unload
sonypi:
- use strscpy() in sonypi_acpi_probe
surface: SAM:
- Add support for Surface Pro 12in
thinkpad_acpi:
- Add debugfs entry to display HWDD raw
- Remove unneeded goto
tools/power/x86/intel-speed-select:
- Harden daemon pidfile open
uniwill-laptop:
- Add support for battery charge modes
- Enable battery charge modes on supported devices
- Mark EC_ADDR_OEM_4 as volatile
- Rework FN lock/super key suspend handling
use u8 * for raw byte buffers:
- use u8 * for raw byte buffers
wmi:
- Make sysfs attributes const
- Make wmi_bus_class const
x86-android-tablets:
- enable fwnode matching of GPIO chips
- Use named initializers for struct i2c_device_id
x86/platform/olpc: xo15:
- Convert ACPI driver to a platform one
- Drop wakeup source on driver removal
xo15-ebook:
- Convert ACPI driver to a platform one
- Fix formatting of labels
- Fix wakeup source and GPE handling
- Register ACPI notify handler directly
- Use devres-based resource management
Merges:
- Merge branch 'fixes' into for-next
- Merge branch 'fixes' of into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCajl8LgAKCRBZrE9hU+XO
MZ47AP0Z0IoiT8WEcXL4wuTQyR6ruXWClYk82wiroAFEko8Z5AD/WYNWCBXqjZk+
FlJbtleRLA/ADmgT3Mj+biHNTIqyBA0=
=Q3d+
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (115 commits)
platform/x86/intel/pmc: Add NVL PCI IDs for SSRAM telemetry discovery
platform/x86/intel/pmc/ssram: Make PMT registration optional
platform/x86/intel/pmc/ssram: Add ACPI discovery scaffolding
platform/x86/intel/pmc/ssram: Switch to static array with per-index probe state
platform/x86/intel/pmc/ssram: Refactor DEVID/PWRMBASE extraction into helper
platform/x86/intel/pmc/ssram: Add PCI platform data
platform/x86/intel/pmc/ssram: Rename probe and PCI ID table for consistency
platform/x86/intel/pmc: Add ACPI PWRM telemetry driver for Nova Lake S
platform/x86/intel/pmc: Add PMC SSRAM Kconfig description
platform/x86/intel/pmt: Unify header fetch and add ACPI source
platform/x86/intel/pmt: Cache the telemetry discovery header
platform/x86/intel/pmt: Pass discovery index instead of resource
platform/x86/intel/pmt/telemetry: Move overlap check to post-decode hook
platform/x86/intel/pmt/crashlog: Split init into pre-decode
platform/x86/intel/pmt: Add pre/post decode hooks around header parsing
modpost: Handle malformed WMI GUID strings
platform/wmi: Make sysfs attributes const
platform/wmi: Make wmi_bus_class const
hwmon: (dell-smm) Use new buffer-based WMI API
platform/x86: dell-ddv: Use new buffer-based WMI API
...
|
||
|
Linus Torvalds
|
e4b4bfaa50 |
SPDX patches for 7.2-rc1
Here is a "big" set of SPDX-like patches for 7.2-rc1. It is the addition of the ability for the kernel build process to generate a Software Bill of Materials (SBOM) in the SPDX format, that matches up exactly with just the files that are actually built for the specific kernel image generated. To generate a sbom, after the kernel has been built, just do: make sbom and marvel at the JSON file that is generated... This is needed by users for environments in which a SBOM is required (medical, automotive, anything shipped in the EU, etc.) and cuts down by a massive size the "naive" SBOM solution that many vendors have done by just including _all_ of the kernel files in the resulting document. This result is still a giant JSON file, that I am told parses properly, so we just have to trust that it is properly inclusive as attempting to parse that thing by hand is impossible. The scripts here are self-contained python scripts, no additional libraries or tools to create the SBOM are needed, which is important for many build systems. Overall it's just a bit over 4000 lines of "simple" python code, the most complex part is the regex matching lines, but those are nothing compared to what we maintain in scripts/checkpatch.pl today... The various parts where the tool touches the kbuild subsystem have been acked by the kbuild maintainer, so all should be good here. All of these patches have been in linux-next for weeks with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk0Hg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymLvgCffz6hsZs43VVpbqi7J1UKnxtlcAcAn0Qv2DgS wjRUwh7+ja4WLOaDnRsh =zSW4 -----END PGP SIGNATURE----- Merge tag 'spdx-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is a "big" set of SPDX-like patches for 7.2-rc1. It is the addition of the ability for the kernel build process to generate a Software Bill of Materials (SBOM) in the SPDX format, that matches up exactly with just the files that are actually built for the specific kernel image generated. To generate a sbom, after the kernel has been built, just do: make sbom and marvel at the JSON file that is generated... This is needed by users for environments in which a SBOM is required (medical, automotive, anything shipped in the EU, etc.) and cuts down by a massive size the "naive" SBOM solution that many vendors have done by just including _all_ of the kernel files in the resulting document. This result is still a giant JSON file, that I am told parses properly, so we just have to trust that it is properly inclusive as attempting to parse that thing by hand is impossible. The scripts here are self-contained python scripts, no additional libraries or tools to create the SBOM are needed, which is important for many build systems. Overall it's just a bit over 4000 lines of "simple" python code, the most complex part is the regex matching lines, but those are nothing compared to what we maintain in scripts/checkpatch.pl today... The various parts where the tool touches the kbuild subsystem have been acked by the kbuild maintainer, so all should be good here. All of these patches have been in linux-next for weeks with no reported problems" * tag 'spdx-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: scripts/sbom: add unit tests for SPDX-License-Identifier parsing scripts/sbom: add unit tests for command parsers scripts/sbom: add SPDX build graph scripts/sbom: add SPDX source graph scripts/sbom: add SPDX output graph scripts/sbom: collect file metadata scripts/sbom: add shared SPDX elements scripts/sbom: add JSON-LD serialization scripts/sbom: add SPDX classes scripts/sbom: add additional dependency sources for cmd graph scripts/sbom: add cmd graph generation scripts/sbom: add command parsers scripts/sbom: setup sbom logging scripts/sbom: integrate script in make process scripts/sbom: add documentation |
||
|
Linus Torvalds
|
2e05544060 |
mm.git review status for mm-hotfixes-stable..mm-nonmm-stable
Everything:
Total patches: 108
Reviews/patch: 0.84
Reviewed rate: 75%
Patch series in this merge:
- The 2 patch series "taskstats: fix TGID dead-thread stat retention"
from Yiyang Chen fixes a taskstats TGID aggregation bug where fields
added in the TGID query path were not preserved after thread exit, and
adds a kselftest covering the regression.
- The 2 patch series "lib/tests: string_helpers: Slight improvements"
from Andy Shevchenko improves lib/tests/string_helpers_kunit.c a little.
- The 2 patch series "lib/base64: decode fixes" from Josh Law addreesses
minor issues in lib/base64.c.
- The 3 patch series "selftests/filelock: Make output more kselftestish"
from Mark Brown makes the output from the ofdlocks test a bit easier for
tooling to work with, and also ignores the generated file.
- The 3 patch series "uaccess: unify inline vs outline
copy_{from,to}_user() selection" from Yury Norov simplifies the usercopy
code by removing the selectability of inlining copy_{from,to}_user().
- The 5 patch series "ocfs2: validate inline xattr header consumers"
from ZhengYuan Huang fixes a number of possible issues in the ocfs2
xattr code.
- The 8 patch series "lib and lib/cmdline enhancements" from Dmitry
Antipov provides additional robustness checking in the cmdline handling
code and its in-kernel testing and selftests.
- The 18 patch series "cleanup the RAID6 P/Q library" from Christoph
Hellwig cleans up the RAID6 P/Q library to match the recent updates to
the RAID 5 XOR library and other CRC/crypto libraries.
- The 3 patch series "ocfs2: harden inode validators against forged
metadata" from Michael Bommarito adds three structural checks to OCFS2
dinode validation so malformed on-disk fields are rejected before
ocfs2_populate_inode() copies them into the in-core inode.
- The 2 patch series "lib/raid: replace __get_free_pages() call with
kmalloc()" from Mike Rapoport cleans up the lib/raid code by using
kmalloc() in more places.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCajgeIQAKCRDdBJ7gKXxA
jmlWAQCLJVDZNJMFaXy4a+YHdu3tfemLpSy83A0Le61tOZUdBQD/Sf/7rhgeaM74
32yp53TZLA8xHImCGEin/1ddPJ8DbgY=
=GW2I
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
|
||
|
Gary Guo
|
ac4d1caa82 |
rust: doctest: fix incorrect pattern in replacement
The `-> Result<(), impl core::fmt::Debug>` string is generated by rustdoc
and by adding "::" into the string it no longer finds anything, making
the line useless.
Remove the "::" in the pattern. Omit it in the replacement too, for
consistency with upstream rustdoc.
Fixes:
|
||
|
Pengpeng Hou
|
645323a7f4
|
kconfig: add optional warnings for changed input values
When reading .config input, Kconfig stores user-provided values first and then resolves the final value after applying dependencies, ranges, and other constraints. If the final value differs from the user input, Kconfig already tracks that state internally, but it does not provide a focused diagnostic to show which explicit inputs were adjusted. This is particularly confusing for requested values that get forced down by unmet dependencies or clamped by ranges. Add an opt-in diagnostic controlled by KCONFIG_WARN_CHANGED_INPUT. Emit the warnings from conf_write() and conf_write_defconfig() after value resolution. Print the diagnostic to stderr directly, not through the normal message callback, so it remains visible when conf is run with -s, such as from make -s. Keep the diagnostic out of the conf_message() formatting buffer so long warning lists are not truncated, and mark processed symbols as written before the SYMBOL_WRITE check so duplicate menu nodes cannot emit duplicate warnings. Document the new environment variable and add tests for olddefconfig, savedefconfig, and the silent-conf path. Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Tested-by: Julian Braha <julianbraha@gmail.com> Link: https://patch.msgid.link/20260611060000.23858-1-pengpeng@iscas.ac.cn Signed-off-by: Nathan Chancellor <nathan@kernel.org> |
||
|
Rong Xu
|
9a289cc425
|
modpost: Ignore Clang LTO suffixes in symbol matching
When building the kernel with Clang ThinLTO enabled, the compiler can mangle static variable names by appending suffixes such as ".llvm.<hash>" to prevent naming collisions across translation units. This name mangling breaks the section mismatch whitelisting in modpost. modpost relies on glob patterns (e.g., "*_ops" or "*_probe") to identify safe references between permanent data and initialization code. Because the LTO suffix modifies the end of the symbol name, legitimately whitelisted structures fail the match, resulting in false positive warnings. For example, a static pernet_operations struct triggers the following: WARNING: modpost: vmlinux: section mismatch in reference: \ ping_v4_net_ops.llvm.5641696707737373282 (section: .data) -> \ ping_v4_proc_init_net (section: .init.text) Fix this by ignoring "*_ops.llvm.*" in "from" symbol names (the same as "*_ops"). Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202606111233.kM8oo8Df-lkp@intel.com/ Signed-off-by: Rong Xu <xur@google.com> Link: https://patch.msgid.link/20260617224623.1346309-1-xur@google.com Signed-off-by: Nathan Chancellor <nathan@kernel.org> |
||
|
Shardul Deshpande
|
07669b0abe |
treewide: fix transposed "sign" typos and update spelling.txt
Several comments transpose the letters in "assigned" and "unsigned", spelling them with "sing" instead of "sign". Correct all of them. Of these, the misspelling of "assigned" is not yet flagged by checkpatch, so also add it to scripts/spelling.txt. The remaining matches of `grep -ri singed` are RISINGEDGE register and enum names, not typos. Link: https://lore.kernel.org/20260612181633.734458-1-iamsharduld@gmail.com Signed-off-by: Shardul Deshpande <iamsharduld@gmail.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
09fb6892f3 |
Devicetree updates for v7.2:
DT core:
- Add support for handling multiple cells in "iommu-map" entries.
- Support only 1 entry in /reserved-memory "reg" entries. Support for
more than 1 entry has been broken.
- Fix a UAF on alloc_reserved_mem_array() failure
- Make "ibm,phandle" handling logic specific to PPC
- Use memcpy() instead of strcpy() for known length strings
- Ensure __of_find_n_match_cpu_property() handles malformed "reg"
entries
- Add various checks that expected strings are strings before accessing
them
- Drop redundant memset() when unflattening DT
DT bindings:
- Add a DTS style checker. Currently hooked up to dt_binding_check to
check examples.
- Convert st,nomadik platform, ti,omap-dmm, and ti,irq-crossbar
bindings to DT schema
- Add Apple System Management Controller hwmon, Qualcomm Hamoa Embedded
Controller, Qualcomm IPQ6018 PWM controller, fsl,mc1323, Samsung
SOFEF01-M DDIC panel, Freescale i.MX53 Television Encoder, Samsung S2M
series PMIC extcon, and MT6365 PMIC AuxADC schemas
- Extend bindings for QCom Maili and Nord PDC, QCom Hali fastrpc,
qcom,eliza-imem, qcom,oryon-1-5 CPU, and MT6365 Keys
- Consolidate "sram" property definitions
- Fix constraints on "nvmem" properties which only contain phandles and
no arg cells
- Another pass of fixing "phandle-array" constraints
- Add Gira vendor prefix
-----BEGIN PGP SIGNATURE-----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=0d13
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for handling multiple cells in "iommu-map" entries
- Support only 1 entry in /reserved-memory "reg" entries. Support for
more than 1 entry has been broken
- Fix a UAF on alloc_reserved_mem_array() failure
- Make "ibm,phandle" handling logic specific to PPC
- Use memcpy() instead of strcpy() for known length strings
- Ensure __of_find_n_match_cpu_property() handles malformed "reg"
entries
- Add various checks that expected strings are strings before
accessing them
- Drop redundant memset() when unflattening DT
DT bindings:
- Add a DTS style checker. Currently hooked up to dt_binding_check to
check examples
- Convert st,nomadik platform, ti,omap-dmm, and ti,irq-crossbar
bindings to DT schema
- Add Apple System Management Controller hwmon, Qualcomm Hamoa
Embedded Controller, Qualcomm IPQ6018 PWM controller, fsl,mc1323,
Samsung SOFEF01-M DDIC panel, Freescale i.MX53 Television Encoder,
Samsung S2M series PMIC extcon, and MT6365 PMIC AuxADC schemas
- Extend bindings for QCom Maili and Nord PDC, QCom Hali fastrpc,
qcom,eliza-imem, qcom,oryon-1-5 CPU, and MT6365 Keys
- Consolidate "sram" property definitions
- Fix constraints on "nvmem" properties which only contain phandles
and no arg cells
- Another pass of fixing "phandle-array" constraints
- Add Gira vendor prefix"
* tag 'devicetree-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
dt-bindings: interrupt-controller: qcom,pdc: Add Maili compatible string
dt-bindings: interrupt-controller: ti,irq-crossbar: Convert to DT schema
dt-bindings: vendor-prefixes: add Gira
dt-bindings: embedded-controller: Add Qualcomm reference device EC description
dt-bindings: pwm: add IPQ6018 binding
dt-bindings: hwmon: Add Apple System Management Controller hwmon schema
docs: dt: writing-schema: Clarify what is required in a schema
of: Respect #{iommu,msi}-cells in maps
of: Factor arguments passed to of_map_id() into a struct
of: Add convenience wrappers for of_map_id()
of: reserved_mem: zero total_reserved_mem_cnt if no valid /reserved-memory entry
of: reserved_mem: handle NULL name in of_reserved_mem_lookup()
dt-bindings: cache: l2c2x0: Add missing power-domains
dt-bindings: interrupt-controller: renesas,r9a09g077-icu: Fix reg size in example
dt-bindings: nvmem: consumer: Make 'nvmem' an array of one-item entries
drivers/of/overlay: Use memcpy() to copy known length strings
dt-bindings: add self-test fixtures for style checker
dt-bindings: wire style checker into dt_binding_check
scripts/jobserver-exec: propagate child exit status
dt-bindings: add DTS style checker
...
|
||
|
Linus Torvalds
|
42eb3a5ef6 |
linux_kselftest-kunit-7.2-rc1
Fixes to tool and kunit core and new features to both to support JUnit XML (primitive) and backtrace suppression API: - bug/kunit: Core support for suppressing warning backtraces - kunit: tool: Parse and print the reason tests are skipped - kunit: tool: Add (primitive) support for outputting JUnit XML - kunit:tool: Don't write to stdout when it should be disabled - kunit: Add backtrace suppression self-tests - drm: Suppress intentional warning backtraces in scaling unit tests - kunit: Add documentation for warning backtrace suppression API - kunit: Fix spelling mistakes in comments and messages - gen_compile_commands: Ignore libgcc.a - kunit: qemu_configs: Add or1k / openrisc configuration -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmowHNQACgkQCwJExA0N QxxjdQ/+MibsF3MON3LIOPC2/p23zoAv+jDkw4gxYWC3L9Wh3gqsZLUuYwyGc8Xn hO9xN7PEXressO4kukveWYnNtt//aXL3gnZ6Zysbt/BCO73LPxy1IGITDFL58ZVT F12ym07VsbqQIHMXR+ANJfxCE8RuaPzdkSW635sLQAhpB5W1Fb51XXfStbLswrVN iX8XNnOYGjBES8nDiwFKPCtgwvp19XN4B51iSo3XWU8nhcrrBxrk0ToWfyQVwEA0 T87hRL81cHLH4WREw1lwEVQ+lRY5WGBwQsKB2JFmI3HaTwcHbNY8p1sa/YARspmY LFCRLZu/KLio0a4ZxaVq690JCeQ2osgBhCvF9B/sxtc90/kYM5QycpnmpdgyPBZq v0vEnFBG7nAj1epHvmt/S2z11oTpdDbkuTZIEDvW/wsI82wbB6kAkzMY30BRitSJ E+RLZxTtSIovI44BgFVFypVWRa2XMaCKL2+GGZoIJiGUwCeJZSTs1nKtnkhYuhel daHosU85uB6GFnKE1L8LVJ+Vii+iOZUXN9F4B+2vCJ+eXm/0t85yIm5zEmTpKvNu sS8c3KRIkK5kSRitKJtUpiuxUQtPaJCA/w2B9FdPx5+yHmHa+Em3JUn8ZuM1ZRem lNIy1b0gM+kJvGT8ZN1eNDSwrHrC+cJ3RI4AeBYPcJ2ECnFvTYI= =nc4g -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-kunit-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit updates from Shuah Khan: "Fixes to tool and kunit core and new features to both to support JUnit XML (primitive) and backtrace suppression API: - Core support for suppressing warning backtraces - Parse and print the reason tests are skipped - Add (primitive) support for outputting JUnit XML - Don't write to stdout when it should be disabled - Add backtrace suppression self-tests - Suppress intentional warning backtraces in scaling unit tests - Add documentation for warning backtrace suppression API - Fix spelling mistakes in comments and messages - gen_compile_commands: Ignore libgcc.a - qemu_configs: Add or1k / openrisc configuration" * tag 'linux_kselftest-kunit-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit:tool: Don't write to stdout when it should be disabled kunit: tool: Add (primitive) support for outputting JUnit XML kunit: tool: Parse and print the reason tests are skipped kunit: Add documentation for warning backtrace suppression API drm: Suppress intentional warning backtraces in scaling unit tests kunit: Add backtrace suppression self-tests bug/kunit: Core support for suppressing warning backtraces kunit: Fix spelling mistakes in comments and messages kunit: qemu_configs: Add or1k / openrisc configuration gen_compile_commands: Ignore libgcc.a |
||
|
Linus Torvalds
|
97cc7dc16a |
- Move the zero-revision fixup for AMD microcode to the patch level
retrieval function and restrict it to Zen family processors, ensuring patch level arithmetic always operates on a valid revision - Fix an incorrect comment about which CPUID bit is checked when determining whether the microcode loader should be disabled - Add the latest Intel microcode revision data for a broad range of processor models and steppings and add the script which generates the header of minimum expected Intel microcode revisions -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmowMfYACgkQEsHwGGHe VUq4jRAAiUoRmAPSgxfw6fNzn+VcH2pxRa987HtZM/teJO9dec2fswhnOsOdx1Y+ hbQ1uxPdgZzowg2CJL/Il+QNGjpVkA0SaVbnlamX5bRMuEKdWXXawf0eeV3EMmmh f+LaN/jQ3+vuE5boSOh1tVGQOTPyuyOg977leXSPlXxyTMyrVuLAN6+Zs/qsuhSY vWTKY40E+1ZeDHCXcNtOhxKXR7tGjgGrjqLMx0bbs8z1DOP2OJpILHdgPB9igghb hg5uUSj2LTd+28/H0HIu5RqfI7/ulQPBmLFYmw6ENLSR4U3GEtg0gItZEXL6E8Dz UZVMqorpAMV41cPyBvStfK6R8cvGEe6m+iidmsTQDVvQWX9xnSNX1N+HV6Xr+fjN kuPZLEGhkmDRe8mup+n5t/wqw4iDFrfqhgPGgFN2fwDFcs9oJfAHTgMvpdvWGG/2 hbME8PGWFv+N3Piy4GqROuVjcm0cbTTzdzWmWEZ8qO3OakSDC9vex5061/O5DmFB vI7QHanc3Xe3vuf20Jnbc8LFkw54zHBSITrguah0yJFsVqE4tktSsy3NIHLxdP87 7e4oCzmP7oelCgxzvKyZiHzNtzrngGT9L0Nowcg9y/iibWzOkW8F9Ek5NqMaUyo4 JEKXizudArM6oZUtk+E6CAhGotL1en/FhfBmungtaExA2BnCJtc= =KarZ -----END PGP SIGNATURE----- Merge tag 'x86_microcode_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip Pull x86 microcode loader updates from Borislav Petkov: - Move the zero-revision fixup for AMD microcode to the patch level retrieval function and restrict it to Zen family processors, ensuring patch level arithmetic always operates on a valid revision - Fix an incorrect comment about which CPUID bit is checked when determining whether the microcode loader should be disabled - Add the latest Intel microcode revision data for a broad range of processor models and steppings and add the script which generates the header of minimum expected Intel microcode revisions * tag 'x86_microcode_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: x86/microcode/AMD: Move the no-revision fixup to get_patch_level() x86/microcode: Fix comment in microcode_loader_disabled() scripts/x86/intel: Add a script to update the old microcode list x86/microcode/intel: Refresh old_microcode defines with Nov 2025 release |
||
|
Linus Torvalds
|
25a01b5155 |
s390 updates for 7.2 merge window
- Use CIO device online variable instead of the internal FSM state to determine device availability during purge operations - Remove extra check of task_stack_page() because try_get_task_stack() already takes care of that when reading /proc/<pid>/wchan - Allow user-space to use the new SCLP action qualifier 4 for to provide NVMe SMART log data to the platform. - Send AP CHANGE uevents on successful bind and successful association to notify user-space about SE operations on AP queue devices - Add an s390dbf kernel parameter to configure debug log levels and area sizes during early boot - On arm64 the empty zero page is going to be mapped read-only. Do the same for s390 with an explicit set_memory_ro() call - Improve s390-specific bcr_serialize() and cpu_relax() implementations - Remove all unused variables to avoid allmodconfig W=1 build fails with latest clang-23 - Cleanup default Kconfig values for s390 selftests - Add a s390-tod trace clock to allow comparing trace timestamps between different systems or virtual machines on s390 - Remove the s390 implementation of strlcat() in favor of the generic variant - Make consistent the calling order between page_table_check_pte_clear() and secure page conversion across all code paths - Rearrange some fields within AP and zcrypt structs to reduce memory consumption and unused holes - Shorten GR_NUM and VX_NUM macros and move them to a separate header - Replace __get_free_page() with kmalloc() in few sources - Introduce an infrastructure for more efficient this_cpu operations. Eliminate conditional branches when PREEMPT_NONE is removed - Enable Rust support - Use z10 as minimum architecture level, similar to the boot code, to enforce a defined architecture level set - Improve and convert various mem*() helper functions to C. For that add .noinstr.text section to avoid orphaned warnings from the linker - Fix the function pointer type in __ret_from_fork() to correct the indirect call to match kernel thread return type of int - Revert support for DCACHE_WORD_ACCESS to avoid an endless exception loop on read from donated Ultravisor pages at unaligned addresses -----BEGIN PGP SIGNATURE----- iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCai/rTRccYWdvcmRlZXZA bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8KNOAPwMpGVtXcKF4HftCv49X0WpqKbU tdYO9hbq9wanIGpgIgEAk5vggxe74pj+palTbtCDteVjDpnSp811x8gfmLlPrgU= =qzZ2 -----END PGP SIGNATURE----- Merge tag 's390-7.2-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Use CIO device online variable instead of the internal FSM state to determine device availability during purge operations - Remove extra check of task_stack_page() because try_get_task_stack() already takes care of that when reading /proc/<pid>/wchan - Allow user-space to use the new SCLP action qualifier 4 for to provide NVMe SMART log data to the platform. - Send AP CHANGE uevents on successful bind and successful association to notify user-space about SE operations on AP queue devices - Add an s390dbf kernel parameter to configure debug log levels and area sizes during early boot - On arm64 the empty zero page is going to be mapped read-only. Do the same for s390 with an explicit set_memory_ro() call - Improve s390-specific bcr_serialize() and cpu_relax() implementations - Remove all unused variables to avoid allmodconfig W=1 build fails with latest clang-23 - Cleanup default Kconfig values for s390 selftests - Add a s390-tod trace clock to allow comparing trace timestamps between different systems or virtual machines on s390 - Remove the s390 implementation of strlcat() in favor of the generic variant - Make consistent the calling order between page_table_check_pte_clear() and secure page conversion across all code paths - Rearrange some fields within AP and zcrypt structs to reduce memory consumption and unused holes - Shorten GR_NUM and VX_NUM macros and move them to a separate header - Replace __get_free_page() with kmalloc() in few sources - Introduce an infrastructure for more efficient this_cpu operations. Eliminate conditional branches when PREEMPT_NONE is removed - Enable Rust support - Use z10 as minimum architecture level, similar to the boot code, to enforce a defined architecture level set - Improve and convert various mem*() helper functions to C. For that add .noinstr.text section to avoid orphaned warnings from the linker - Fix the function pointer type in __ret_from_fork() to correct the indirect call to match kernel thread return type of int - Revert support for DCACHE_WORD_ACCESS to avoid an endless exception loop on read from donated Ultravisor pages at unaligned addresses * tag 's390-7.2-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/s390/linux: (52 commits) s390: Revert support for DCACHE_WORD_ACCESS s390/process: Fix kernel thread function pointer type s390/tishift: Convert __ashlti3(), __ashrti3(), __lshrti3() to C s390/memmove: Optimize backward copy case s390/string: Convert memset(16|32|64)() to C s390/string: Convert memcpy() to C s390/string: Convert memset() to C s390/string: Convert memmove() to C s390/string: Add -ffreestanding compile option to string.o s390: Add .noinstr.text to boot and purgatory linker scripts s390/purgatory: Enforce z10 minimum architecture level s390: Enable Rust support s390/cmpxchg: Fix KASAN stack-out-of-bounds in atomic helpers rust: helpers: Add memchr wrapper for string operations rust/bindgen_parameters: Mark s390 types as opaque to prevent repr conflicts s390/jump_label: Implement ARCH_STATIC_BRANCH_JUMP_ASM and ARCH_STATIC_BRANCH_ASM macros s390/bug: Provide ARCH_WARN_ASM for Rust WARN/BUG support s390/ap: Fix locking issue in SE bind and associate sysfs functions s390/percpu: Provide arch_this_cpu_write() implementation s390/percpu: Provide arch_this_cpu_read() implementation ... |
||
|
Linus Torvalds
|
d8d706a274 |
Objtool updates for v7.2:
- A large series of KLP fixes and improvements, in preparation of
the arm64 port (Josh Poimboeuf)
- Fix a number of bugs and issues on specific distro, LTO,
FineIBT and kCFI configs (Josh Poimboeuf)
- Misc other fixes by Josh Poimboeuf and Joe Lawrence.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=D5SB
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- A large series of KLP fixes and improvements, in preparation of the
arm64 port (Josh Poimboeuf)
- Fix a number of bugs and issues on specific distro, LTO, FineIBT and
kCFI configs (Josh Poimboeuf)
- Misc other fixes by Josh Poimboeuf and Joe Lawrence
* tag 'objtool-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (53 commits)
objtool/klp: Cache dont_correlate() result
objtool: Improve and simplify prefix symbol detection
objtool/klp: Fix kCFI prefix finding/cloning
objtool: Grow __cfi_* prefix symbols for all CFI+CALL_PADDING
objtool/klp: Fix position-dependent checksums for non-relocated jumps/calls
objtool: Add insn_sym() helper
objtool/klp: Add correlation debugging output
objtool/klp: Rewrite symbol correlation algorithm
objtool/klp: Calculate object checksums
klp-build: Validate short-circuit prerequisites
objtool/klp: Remove "objtool --checksum"
klp-build: Use "objtool klp checksum" subcommand
objtool/klp: Add "objtool klp checksum" subcommand
objtool: Consolidate file decoding into decode_file()
objtool/klp: Extricate checksum calculation from validate_branch()
objtool: Add is_cold_func() helper
objtool: Add is_alias_sym() helper
objtool/klp: Handle Clang .data..Lanon anonymous data sections
objtool/klp: Create empty checksum sections for function-less object files
objtool: Include libsubcmd headers directly from source tree
...
|
||
|
Linus Torvalds
|
a53fcff8fc |
Updates for the NOHZ subsystem:
- Fix a long standing TOCTOU in get_cpu_sleep_time_us()
- Make the CPU offline NOHZ handling more robust by disabling NOHZ on the
outgoing CPU early instead of creating unneeded state which needs to be
undone.
- Unify idle CPU time accounting instead of having two different
accounting mechanisms. These two different mechanisms are not really
independent, but the different properties can in the worst case cause
that gloabl idle time can be observed going backwards.
- Consolidate the idle/iowait time retrieval interfaces instead of
converting back and forth between them.
- Make idle interrupt time accounting more robust. The original code
assumes that interrupt time accouting is enabled and therefore stops
elapsing idle time while an interrupt is handled in NOHZ dyntick
state. That assumption is not correct as interrupt time accounting can
be disabled at compile and runtime.
- Fix an accounting error between dyntick idle time and dyntick idle
steal time. The stolen time is not accounted and therefore idle time
becomes inaccurate. The stolen time is now accounted after the fact as
there is no way to predict the steal time upfront.
-----BEGIN PGP SIGNATURE-----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=+cVw
-----END PGP SIGNATURE-----
Merge tag 'timers-nohz-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull NOHZ updates from Thomas Gleixner:
- Fix a long standing TOCTOU in get_cpu_sleep_time_us()
- Make the CPU offline NOHZ handling more robust by disabling NOHZ on
the outgoing CPU early instead of creating unneeded state which needs
to be undone.
- Unify idle CPU time accounting instead of having two different
accounting mechanisms. These two different mechanisms are not really
independent, but the different properties can in the worst case cause
that gloabl idle time can be observed going backwards.
- Consolidate the idle/iowait time retrieval interfaces instead of
converting back and forth between them.
- Make idle interrupt time accounting more robust. The original code
assumes that interrupt time accouting is enabled and therefore stops
elapsing idle time while an interrupt is handled in NOHZ dyntick
state. That assumption is not correct as interrupt time accounting
can be disabled at compile and runtime.
- Fix an accounting error between dyntick idle time and dyntick idle
steal time. The stolen time is not accounted and therefore idle time
becomes inaccurate. The stolen time is now accounted after the fact
as there is no way to predict the steal time upfront.
* tag 'timers-nohz-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Handle dyntick-idle steal time correctly
sched/cputime: Handle idle irqtime gracefully
sched/cputime: Provide get_cpu_[idle|iowait]_time_us() off-case
tick/sched: Consolidate idle time fetching APIs
tick/sched: Account tickless idle cputime only when tick is stopped
tick/sched: Remove unused fields
tick/sched: Move dyntick-idle cputime accounting to cputime code
tick/sched: Remove nohz disabled special case in cputime fetch
tick/sched: Unify idle cputime accounting
s390/time: Prepare to stop elapsing in dynticks-idle
powerpc/time: Prepare to stop elapsing in dynticks-idle
sched/cputime: Correctly support generic vtime idle time
sched/cputime: Remove superfluous and error prone kcpustat_field() parameter
sched/idle: Handle offlining first in idle loop
tick/sched: Fix TOCTOU in nohz idle time fetch
|
||
|
Linus Torvalds
|
a60ce761d9 |
Updates for the time/timer core subsystem:
- Harden the user space controllable hrtimer interfaces further to
protect against unpriviledged DoS attempts by arming timers in the past.
- Add per-capacity hierarchies to the timer migration code to prevent
timer migration accross different capacity domains. This code has been
disabled last minute as there is a pathological problem with SoCs which
advertise a larger number of capacity domains. The problem is under
investigation and the code won't be active before v7.3, but that turned
out to be less intrusive than a full revert as it preserves the
preparatory steps and allows people to work on the final resolution
- Export time namespace functionality as a recent user can be built as a
module.
- Initialize the jiffies clocksource before using it. The recent
hardening against time moving backward requires that the related
members of struct clocksource have been initialized, otherwise it
clamps the readout to 0, which makes time stand sill and causes boot
delays.
- Fix a more than twenty year old PID reference count leak in an error
path of the POSIX CPU timer code.
- The usual small fixes, improvements and cleanups all over the place.
-----BEGIN PGP SIGNATURE-----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=KRcs
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
"Updates for the time/timer core subsystem:
- Harden the user space controllable hrtimer interfaces further to
protect against unpriviledged DoS attempts by arming timers in the
past.
- Add per-capacity hierarchies to the timer migration code to prevent
timer migration accross different capacity domains. This code has
been disabled last minute as there is a pathological problem with
SoCs which advertise a larger number of capacity domains. The
problem is under investigation and the code won't be active before
v7.3, but that turned out to be less intrusive than a full revert
as it preserves the preparatory steps and allows people to work on
the final resolution
- Export time namespace functionality as a recent user can be built
as a module.
- Initialize the jiffies clocksource before using it. The recent
hardening against time moving backward requires that the related
members of struct clocksource have been initialized, otherwise it
clamps the readout to 0, which makes time stand sill and causes
boot delays.
- Fix a more than twenty year old PID reference count leak in an
error path of the POSIX CPU timer code.
- The usual small fixes, improvements and cleanups all over the
place"
* tag 'timers-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (31 commits)
posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path
time/jiffies: Register jiffies clocksource before usage
timers/migration: Temporarily disable per capacity hierarchies
timers/migration: Turn tmigr_hierarchy level_list into a flexible array
timers/migration: Deactivate per-capacity hierarchies under nohz_full
timers/migration: Fix hotplug migrator selection target on asymetric capacity machines
ntsync: Honour caller's time namespace for absolute MONOTONIC timeouts
time/namespace: Export init_time_ns and do_timens_ktime_to_host()
timers/migration: Update stale @online doc to @available
timers: Fix flseep() typo in kernel-doc comment
hrtimer: Fix the bogus return type of __hrtimer_start_range_ns()
hrtimer: Return ktime_t from hrtimer_get_next_event()/hrtimer_next_event_without()
clocksource: Clean up clocksource_update_freq() functions
alarmtimer: Remove stale return description from alarm_handle_timer()
selftests/posix_timers: Use CLOCK_THREAD_CPUTIME_ID for ITIMER_PROF measurements
scripts/timers: Add timer_migration_tree.py
timers/migration: Handle capacity in connect tracepoints
timers/migration: Split per-capacity hierarchies
timers/migration: Track CPUs in a hierarchy
timers/migration: Abstract out hierarchy to prepare for CPU capacity awareness
...
|
||
|
Linus Torvalds
|
13e1a6d6a1 |
Interrupt core code changes:
- Rework of /proc/interrupt handling:
/proc/interrupts was subject to micro optimizations for a long time,
but most of the low hanging fruit was left on the table. This rework
addresses the major time consuming issues:
- Printing a long series of zeros one by one via a format string
instead of counting subsequent zeros and emitting a string
constant.
- Simplify and cache the conditions whether interrupts should be printed
- Use a proper iteration over the interrupt descriptor xarray
instead of walking and testing one by one.
- Provide helper functions for the architecture code to emit the
architecture specific counters
- Convert the counter structure in x86 to an array, which
simplifies the output and add mechanisms to suppress unused
architecture interrupts, which just occupy space for
nothing. Adopt the new core mechanisms.
This adjusts the gdb scripts related to interrupt counter statitics
to work with the new mechanisms.
- Prevent a string overflow in the /proc/irq/$N/ directory name
creation code.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmoths8QHHRnbHhAa2Vy
bmVsLm9yZwAKCRCmGPVMDXSYoSoMEACRODwHjNfULjgD2heHbiPKsmPMRZvwO1Ud
xu5XAoNT1gwxnLo4D+KrGCZeyxka+byRpby6eNg7HdRJuu3DUf8umwt/Q472I9a9
ck8OGFp8ntbxnueISKfzxY/O2eXHYxSKmmfZMv3wdOKbvn5OUlFT6eHPjb8PzVUM
7DiXsBL8s3MNHwdJ3grG5lBh60pt5fujzURwYAqvh/i8jlDHxsFRTMGuhR710knr
YZrgZ4/7ffnEbDsn98xezPewRomIbhhEijgfjkkbnYYUub6Y2RHJqOzZhlp6zNgi
vTsU/suW3ryVuzG34rL2uHvsxOcJY1HNA+ING7fkRmPuKxRGKOMBQfPmLQcWqP69
GxwGIlBvNbAEYievgTCS7GNHTy3t0JbxTGhHcBvX3oMtnnOSTttqH9XzvrTwGxjj
fMUykfvB+40Fp47D+t0JDhgyNNEkixSBjW8/gogZFQ0OdMFX6BQZNT/DLhMMC0LR
JbqMpfsffp5+gYam/wixv3sPlxajMpQ2w8ocgyUHVAeFMo1LOY1spUuO3+Tq7nSj
xt95xVg6HQDr+L+8QmZmnRq27uG276CxPpLotbPMsrn0Ax5PL+fymfmVsFmJFjAR
ZHKK3tSD6M94GtklfKlB/yBJGNRafH4MVZbMa0iUxGI6UyAFr/Yror3mfDK9NsIA
WTwwaqI8qw==
=z6vj
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull interrupt core updates from Thomas Gleixner:
- Rework of /proc/interrupt handling:
/proc/interrupts was subject to micro optimizations for a long time,
but most of the low hanging fruit was left on the table. This rework
addresses the major time consuming issues:
- Printing a long series of zeros one by one via a format string
instead of counting subsequent zeros and emitting a string
constant.
- Simplify and cache the conditions whether interrupts should be
printed
- Use a proper iteration over the interrupt descriptor xarray
instead of walking and testing one by one.
- Provide helper functions for the architecture code to emit the
architecture specific counters
- Convert the counter structure in x86 to an array, which
simplifies the output and add mechanisms to suppress unused
architecture interrupts, which just occupy space for nothing.
Adopt the new core mechanisms.
This adjusts the gdb scripts related to interrupt counter statistics
to work with the new mechanisms.
- Prevent a string overflow in the /proc/irq/$N/ directory name
creation code.
* tag 'irq-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/irq: Add missing 's' back to thermal event printout
genirq/proc: Speed up /proc/interrupts iteration
genirq/proc: Runtime size the chip name
genirq: Expose irq_find_desc_at_or_after() in core code
genirq: Add rcuref count to struct irq_desc
genirq/proc: Increase default interrupt number precision to four
genirq: Calculate precision only when required
genirq: Cache the condition for /proc/interrupts exposure
genirq/manage: Make NMI cleanup RT safe
genirq: Expose nr_irqs in core code
scripts/gdb: Update x86 interrupts to the array based storage
x86/irq: Move IOAPIC misrouted and PIC/APIC error counts into irq_stats
x86/irq: Suppress unlikely interrupt stats by default
x86/irq: Make irqstats array based
genirq/proc: Utilize irq_desc::tot_count to avoid evaluation
genirq/proc: Avoid formatting zero counts in /proc/interrupts
x86/irq: Optimize interrupts decimals printing
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
|
||
|
Linus Torvalds
|
b079329b86 |
Rust changes for v7.2
Toolchain and infrastructure:
- Introduce support for the 'zerocopy' library [1][2]:
Fast, safe, compile error. Pick two.
Zerocopy makes zero-cost memory manipulation effortless. We write
`unsafe` so you don't have to.
It essentially provides derivable traits (e.g. 'FromBytes') and
macros (e.g. 'transmute!') for safely converting between byte
sequences and other types. Having such support allows us to remove
some 'unsafe' code.
It is among the most downloaded Rust crates and it is also used by
the Rust compiler itself.
It is licensed under "BSD-2-Clause OR Apache-2.0 OR MIT".
The crates are imported essentially as-is (only +2/-3 lines needed
to be adapted), plus SPDX identifiers. Upstream has since added the
SPDX identifiers as well as one of the tweaks at my request, thus
reducing our future diffs on updates -- I keep the details in one of
our usual live lists [3].
In total, it is about ~39k lines added, ~32k without counting
'benches/' which are just for documentation purposes.
The series includes a few Kbuild and rust-analyzer improvements and
an example patch using it in Nova, removing one 'unsafe impl'.
I checked that the codegen of an isolated example function (similar
to the Nova patch on top) is essentially identical. It also turns out
that (for that particular case) the 'zerocopy' version, even with
'debug-assertions' enabled, has no remaining panics, unlike a few in
the current code (since the compiler can prove the remaining
'ub_checks' statically).
So their "fast, safe" does indeed check out -- at least in that case.
Link: https://github.com/google/zerocopy [1]
Link: https://docs.rs/zerocopy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/1239 [3]
- Support AutoFDO. This allows Rust code to be profiled and optimized
based on the profile. Tested with Rust Binder: ~13% slower without
AutoFDO in the binderAddInts benchmark (using an app-launch benchmark
for the profile).
- Support Software Tag-Based KASAN.
In addition, fix KASAN Kconfig by requiring Clang.
- Add Kconfig options for each existing Rust KUnit test suite, such as
'CONFIG_RUST_BITMAP_KUNIT_TEST'. They are placed within a new menu,
'CONFIG_RUST_KUNIT_TESTS', in the new 'rust/kernel/Kconfig.test'
file.
- Support the upcoming Rust 1.98.0 release (expected 2026-08-20): lint
cleanups and an unstable flag rename.
- Disable 'rustdoc' documentation inlining for all prelude items, which
bloats the generated documentation.
- Ignore (in Git) and clean (in Kbuild) the (rarely) 'rustc'-generated
'*.long-type-*.txt' files.
'kernel' crate:
- Add new 'bitfield' module with the 'bitfield!' macro (extracted from
the existing 'register!' one), which declares integer types that are
split into distinct bit fields of arbitrary length.
Each field is a 'Bounded' of the appropriate bit width (ensuring
values are properly validated and avoiding implicit data loss) and
gets several generated getters and setters (infallible, 'const' and
fallible) as well as associated constants ('_MASK', '_SHIFT' and
'_RANGE'). It also supports fields that can be converted from/to
custom types, either fallibly ('?=>') or infallibly ('=>').
For instance:
bitfield! {
struct Rgb(u16) {
15:11 blue;
10:5 green;
4:0 red;
}
}
// Compile-time checks.
let color = Rgb::zeroed().with_const_green::<0x1f>();
assert_eq!(color.green(), 0x1f);
assert_eq!(color.into_raw(), 0x1f << Rgb::GREEN_SHIFT);
Add as well documentation and a test suite for it, as usual; and
update the 'register!' macro to use it.
It will be maintained by Alexandre Courbot (with Yury Norov as
reviewer) under a new 'MAINTAINERS' entry: 'RUST [BITFIELD]'.
- 'ptr' module: rework index projection syntax into keyworded syntax
and introduce panicking variant.
The keyword syntax ('build:', 'try:', 'panic:') is more explicit and
paves the way of perhaps adding more flavors in the future, e.g. an
'unsafe' index projection.
For instance, projections now look like this:
fn f(p: *const [u8; 32]) -> Result {
// Ok, within bounds, checked at build time.
project!(p, [build: 1]);
// Build error.
project!(p, [build: 128]);
// `OutOfBound` runtime error (convertible to `ERANGE`).
project!(p, [try: 128]);
// Runtime panic.
project!(p, [panic: 128]);
Ok(())
}
Update as well the users, which now look like e.g.
// Pointer to the first entry of the GSP message queue.
let data = project!(self.0.as_ptr(), .gspq.msgq.data[build: 0]);
- 'build_assert' module: make the module the home of its macros instead
of rendering them twice.
- 'sync' module: add 'UniqueArc::as_ptr()' associated function.
- 'alloc' module:
+ Fix the 'Vec::reserve()' doctest to properly account for the
existing vector length in the capacity assertion.
+ Fix an incorrect operator in the 'Vec::extend_with()' 'SAFETY'
comment; add a doc test demonstrating basic usage and the
zero-length case.
- Clean imports across several modules to follow the "kernel vertical"
import style in order to minimize conflicts.
'pin-init' crate:
- User visible changes:
+ Do not generate 'non_snake_case' warnings for identifiers that are
syntactically just users of a field name. This would allow all
'#[allow(non_snake_case)]' in nova-core to be removed, which Gary
will send to the nova tree next cycle.
+ Filter non-cfg attributes out properly in derived structs. This
improves pin-init compatibility with other derive macros.
+ Insert projection types' where clause properly.
- Other changes:
+ Bump MSRV to 1.82, plus associated cleanups.
+ Overhaul how init slots are projected. The new approach is easier
to justify with safety comments.
+ Mark more functions as inline, which should help mitigate the
super-long symbol name issue due to lack of inlining.
rust-analyzer:
- Support '--envs' for passing env vars for crates like 'zerocopy'.
'MAINTAINERS':
- Add the following reviewers to the 'RUST' entry:
+ Daniel Almeida
+ Tamir Duberstein
+ Alexandre Courbot
+ Onur Özkan
They have been involved in the Rust for Linux project for about
7 collective years and bring expertise across several domains, which
will be very useful to have around in the future.
Thanks everyone for stepping up!
And some other fixes, cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=Setk
-----END PGP SIGNATURE-----
Merge tag 'rust-7.2' of gitolite.kernel.org:pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"This one is big due to the vendoring of the `zerocopy` library, which
allows us to replace a bunch of `unsafe` code dealing with conversions
between byte sequences and other types with safe alternatives. More
details on that below (and in its merge commit).
Toolchain and infrastructure:
- Introduce support for the 'zerocopy' library [1][2]:
Fast, safe, compile error. Pick two.
Zerocopy makes zero-cost memory manipulation effortless. We write
`unsafe` so you don't have to.
It essentially provides derivable traits (e.g. 'FromBytes') and
macros (e.g. 'transmute!') for safely converting between byte
sequences and other types. Having such support allows us to remove
some 'unsafe' code.
It is among the most downloaded Rust crates and it is also used by
the Rust compiler itself.
It is licensed under "BSD-2-Clause OR Apache-2.0 OR MIT".
The crates are imported essentially as-is (only +2/-3 lines needed
to be adapted), plus SPDX identifiers. Upstream has since added the
SPDX identifiers as well as one of the tweaks at my request, thus
reducing our future diffs on updates -- I keep the details in one
of our usual live lists [3].
In total, it is about ~39k lines added, ~32k without counting
'benches/' which are just for documentation purposes.
The series includes a few Kbuild and rust-analyzer improvements and
an example patch using it in Nova, removing one 'unsafe impl'.
I checked that the codegen of an isolated example function (similar
to the Nova patch on top) is essentially identical. It also turns
out that (for that particular case) the 'zerocopy' version, even
with 'debug-assertions' enabled, has no remaining panics, unlike a
few in the current code (since the compiler can prove the remaining
'ub_checks' statically).
So their "fast, safe" does indeed check out -- at least in that
case.
- Support AutoFDO. This allows Rust code to be profiled and optimized
based on the profile. Tested with Rust Binder: ~13% slower without
AutoFDO in the binderAddInts benchmark (using an app-launch
benchmark for the profile).
- Support Software Tag-Based KASAN.
In addition, fix KASAN Kconfig by requiring Clang.
- Add Kconfig options for each existing Rust KUnit test suite, such
as 'CONFIG_RUST_BITMAP_KUNIT_TEST'.
They are placed within a new menu, 'CONFIG_RUST_KUNIT_TESTS', in
the new 'rust/kernel/Kconfig.test' file.
- Support the upcoming Rust 1.98.0 release (expected 2026-08-20):
lint cleanups and an unstable flag rename.
- Disable 'rustdoc' documentation inlining for all prelude items,
which bloats the generated documentation.
- Ignore (in Git) and clean (in Kbuild) the (rarely) 'rustc'-generated
'*.long-type-*.txt' files.
'kernel' crate:
- Add new 'bitfield' module with the 'bitfield!' macro (extracted
from the existing 'register!' one), which declares integer types
that are split into distinct bit fields of arbitrary length.
Each field is a 'Bounded' of the appropriate bit width (ensuring
values are properly validated and avoiding implicit data loss) and
gets several generated getters and setters (infallible, 'const' and
fallible) as well as associated constants ('_MASK', '_SHIFT' and
'_RANGE'). It also supports fields that can be converted from/to
custom types, either fallibly ('?=>') or infallibly ('=>').
For instance:
bitfield! {
struct Rgb(u16) {
15:11 blue;
10:5 green;
4:0 red;
}
}
// Compile-time checks.
let color = Rgb::zeroed().with_const_green::<0x1f>();
assert_eq!(color.green(), 0x1f);
assert_eq!(color.into_raw(), 0x1f << Rgb::GREEN_SHIFT);
Add as well documentation and a test suite for it, as usual; and
update the 'register!' macro to use it.
It will be maintained by Alexandre Courbot (with Yury Norov as
reviewer) under a new 'MAINTAINERS' entry: 'RUST [BITFIELD]'.
- 'ptr' module: rework index projection syntax into keyworded syntax
and introduce panicking variant.
The keyword syntax ('build:', 'try:', 'panic:') is more explicit
and paves the way of perhaps adding more flavors in the future,
e.g. an 'unsafe' index projection.
For instance, projections now look like this:
fn f(p: *const [u8; 32]) -> Result {
// Ok, within bounds, checked at build time.
project!(p, [build: 1]);
// Build error.
project!(p, [build: 128]);
// `OutOfBound` runtime error (convertible to `ERANGE`).
project!(p, [try: 128]);
// Runtime panic.
project!(p, [panic: 128]);
Ok(())
}
Update as well the users, which now look like e.g.
// Pointer to the first entry of the GSP message queue.
let data = project!(self.0.as_ptr(), .gspq.msgq.data[build: 0]);
- 'build_assert' module: make the module the home of its macros
instead of rendering them twice.
- 'sync' module: add 'UniqueArc::as_ptr()' associated function.
- 'alloc' module:
- Fix the 'Vec::reserve()' doctest to properly account for the
existing vector length in the capacity assertion.
- Fix an incorrect operator in the 'Vec::extend_with()' 'SAFETY'
comment; add a doc test demonstrating basic usage and the
zero-length case.
- Clean imports across several modules to follow the "kernel
vertical" import style in order to minimize conflicts.
'pin-init' crate:
- User visible changes:
- Do not generate 'non_snake_case' warnings for identifiers that
are syntactically just users of a field name. This would allow
all '#[allow(non_snake_case)]' in nova-core to be removed,
which Gary will send to the nova tree next cycle.
- Filter non-cfg attributes out properly in derived structs. This
improves pin-init compatibility with other derive macros.
- Insert projection types' where clause properly.
- Other changes:
- Bump MSRV to 1.82, plus associated cleanups.
- Overhaul how init slots are projected. The new approach is
easier to justify with safety comments.
- Mark more functions as inline, which should help mitigate the
super-long symbol name issue due to lack of inlining.
rust-analyzer:
- Support '--envs' for passing env vars for crates like 'zerocopy'.
'MAINTAINERS':
- Add the following reviewers to the 'RUST' entry:
- Daniel Almeida
- Tamir Duberstein
- Alexandre Courbot
- Onur Özkan
They have been involved in the Rust for Linux project for about 7
collective years and bring expertise across several domains, which
will be very useful to have around in the future.
Thanks everyone for stepping up!
And some other fixes, cleanups and improvements"
Link: https://github.com/google/zerocopy [1]
Link: https://docs.rs/zerocopy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/1239 [3]
* tag 'rust-7.2' of gitolite.kernel.org:pub/scm/linux/kernel/git/ojeda/linux: (86 commits)
MAINTAINERS: add Onur Özkan as Rust reviewer
MAINTAINERS: add Alexandre Courbot as Rust reviewer
MAINTAINERS: add Tamir Duberstein as Rust reviewer
MAINTAINERS: add Daniel Almeida as Rust reviewer
kbuild: rust: clean `zerocopy-derive` in `mrproper`
rust: make `build_assert` module the home of related macros
rust: str: clean unused import for Rust >= 1.98
rust: str: use the "kernel vertical" imports style
rust: aref: use the "kernel vertical" imports style
rust: page: use the "kernel vertical" imports style
gpu: nova-core: firmware: parse `FalconUCodeDescV2` via `zerocopy`
rust: prelude: add `zerocopy{,_derive}::FromBytes`
rust: zerocopy-derive: enable support in kbuild
rust: zerocopy-derive: add `README.md`
rust: zerocopy-derive: avoid generating non-ASCII identifiers
rust: zerocopy-derive: add SPDX License Identifiers
rust: zerocopy-derive: import crate
rust: zerocopy: enable support in kbuild
rust: zerocopy: add `README.md`
rust: zerocopy: remove float `Display` support
...
|
||
|
Linus Torvalds
|
b8b674748f |
RCU pull request for v7.2
-----BEGIN PGP SIGNATURE-----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=Hsv1
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v7.2' of gitolite.kernel.org:pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Uladzislau Rezki:
"Torture test updates:
- Improve kvm-series.sh script by adding examples in its header
comment
- Lazy RCU is more fully tested now by replacing call_rcu_hurry()
with call_rcu() and doing rcu_barrier() to motivate lazy callbacks
during a stutter pause
- Add more synonyms for the "--do-normal" group of torture.sh
command-line arguments
Misc changes:
- Reduce stack usage of nocb_gp_wait() to address frame size warning
when built with CONFIG_UBSAN_ALIGNMENT
- The synchronize_rcu() call can detect the flood and latches a
normal/default path temporary switching to wait_rcu_gp() path
- Document using rcu_access_pointer() to fetch the old pointer for
lockless cmpxchg() updates
- Simplify some RCU code using clamp_val()
- Fix a kerneldoc header comment typo in srcu_down_read_fast()"
* tag 'rcu.release.v7.2' of gitolite.kernel.org:pub/scm/linux/kernel/git/rcu/linux:
rcu/nocb: reduce stack usage in nocb_gp_wait()
rcu-tasks: Fix possible boot-time tests failed for the call_rcu_tasks()
rcu: Latch normal synchronize_rcu() path on flood
rcu: Document rcu_access_pointer() feeding into cmpxchg()
rcu: Simplify param_set_next_fqs_jiffies() by applying clamp_val()
rcu: Simplify rcu_do_batch() by applying clamp()
checkpatch: Undeprecate rcu_read_lock_trace() and rcu_read_unlock_trace()
srcu: Fix kerneldoc header comment typo in srcu_down_read_fast()
torture: Allow "norm" abbreviation for "normal"
torture: Improve kvm-series.sh header comment
torture: Add torture_sched_set_normal() for user-specified nice values
rcutorture: Fully test lazy RCU
|
||
|
Linus Torvalds
|
73f399414a |
Kbuild / Kconfig changes for 7.2
Kbuild:
- Remove broken module linking exclusion for BTF
- Add documentation around how offset header files work
- Include unstripped vDSO libraries in pacman packages
- Bump minimum version of LLVM for building the kernel to 17.0.1 and
clean up unnecessary workarounds
- Use a context manager in run-clang-tools
- Add dist macro value if present to release tag for RPM packages
- Detect and report truncated buf_printf() output in modpost
- Add __llvm_covfun and __llvm_covmap to section whitelist in modpost
- Support Clang's distributed ThinLTO mode
- Remove architecture specific configurations for AutoFDO and Propeller
to ease individual architecture maintenance
Kconfig:
- Add kconfig-sym-check target to look for dangling Kconfig symbol
references and invalid tristate literal values
- Harden against potential NULL pointer dereference
- Fix typo in Kconfig test comment
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaijIpwAKCRAdayaRccAa
lszAAQD0PuP+a0IejIyubuvEeB0ecG5nvKZIV99veIaivp9J4QD+PwYuPf+Y9A0r
PqiV0IBrnhbmjNrSj8Clt2eHXqa4jg4=
=J1xQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild / Kconfig updates from Nathan Chancellor:
"Kbuild:
- Remove broken module linking exclusion for BTF
- Add documentation around how offset header files work
- Include unstripped vDSO libraries in pacman packages
- Bump minimum version of LLVM for building the kernel to 17.0.1 and
clean up unnecessary workarounds
- Use a context manager in run-clang-tools
- Add dist macro value if present to release tag for RPM packages
- Detect and report truncated buf_printf() output in modpost
- Add __llvm_covfun and __llvm_covmap to section whitelist in modpost
- Support Clang's distributed ThinLTO mode
- Remove architecture specific configurations for AutoFDO and
Propeller to ease individual architecture maintenance
Kconfig:
- Add kconfig-sym-check target to look for dangling Kconfig symbol
references and invalid tristate literal values
- Harden against potential NULL pointer dereference
- Fix typo in Kconfig test comment"
* tag 'kbuild-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (31 commits)
kconfig: tests: fix typo in comment
kconfig: Remove the architecture specific config for Propeller
kconfig: Remove the architecture specific config for AutoFDO
modpost: Add __llvm_covfun and __llvm_covmap to section_white_list
kconfig: add kconfig-sym-check static checker
kbuild: Remove unnecessary 'T' modifier in cmd_ar_builtin_fixup
kbuild: distributed build support for Clang ThinLTO
kbuild: move vmlinux.a build rule to scripts/Makefile.vmlinux_a
scripts: modpost: detect and report truncated buf_printf() output
kbuild: rpm-pkg: append %{?dist} macro to Release tag
run-clang-tools: run multiprocessing.Pool as context manager
compiler-clang.h: Drop explicit version number from "all" diagnostic macro
compiler-clang.h: Remove __cleanup -Wunused-variable workaround
kbuild: Remove check for broken scoping with clang < 17 in CC_HAS_ASM_GOTO_OUTPUT
x86/entry/vdso32: Remove conditional omission of '.cfi_offset eflags'
x86/module: Revert "Deal with GOT based stack cookie load on Clang < 17"
x86/build: Drop unnecessary '-ffreestanding' addition to KBUILD_CFLAGS
scripts/Makefile.warn: Drop -Wformat handling for clang < 16
riscv: Drop tautological condition from TOOLCHAIN_NEEDS_OLD_ISA_SPEC
riscv: Remove tautological condition from selection of ARCH_SUPPORTS_CFI
...
|
||
|
Armin Wolf
|
3429ae7b2f
|
modpost: Handle malformed WMI GUID strings
Some WMI GUIDs found inside binary MOF files contain both uppercase and lowercase characters. Blindly copying such GUIDs will prevent the associated WMI driver from loading automatically because the WMI GUID found inside WMI device ids always contains uppercase characters. Avoid this issue by always converting WMI GUID strings to uppercase. Also verify that the WMI GUID string actually looks like a valid GUID. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20260610203453.816254-10-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
Cryolitia PukNgae
|
66cbd50430 |
checkpatch: cuppress warnings when Reported-by: is followed by Link:
> The tag should be followed by a Closes: tag pointing to the report, > unless the report is not available on the web. The Link: tag can be > used instead of Closes: if the patch fixes a part of the issue(s) > being reported. According to Documentation/process/submitting-patches.rst, Link: is also acceptable to follow a Reported-by:, if the patch fixes a part of the issue(s) being reported. Link: https://lore.kernel.org/20260605-checkpatch-v1-1-8c68ae618513@linux.dev Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Cc: Andy Whitcroft <apw@canonical.com> Cc: Cheng Nie <niecheng1@uniontech.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Daniel Golle
|
efb6347d8b |
dt-bindings: add self-test fixtures for style checker
Provide good/ and bad/ DTS and YAML fixtures plus a small runner that feeds them to dt-check-style and diffs the output against expected text files. Wired into a new top-level dt_style_selftest make target so the suite can be exercised independently of the full tree. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/80fec5d2cfcdee0f9c5e2d4921ebbd4115d392b7.1779908995.git.daniel@makrotopia.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Daniel Golle
|
28019885a3 |
scripts/jobserver-exec: propagate child exit status
main() called JobserverExec().run() and discarded its return value,
then the script exited with the implicit status 0. As a result, any
Makefile that wired a build step through jobserver-exec saw the step
silently succeed even when the wrapped command had failed.
Two in-tree callers were affected:
Documentation/devicetree/bindings/Makefile
cmd_chk_style runs a python checker via jobserver-exec and uses
"&& touch $@ || true" so failures leave the stamp file untouched
and the next make rerun reports them again. The swallowed exit
code made the stamp file get created even on failure, caching the
failed run and hiding the reported issues until the inputs change.
scripts/Makefile.vmlinux_o
cmd_gen_initcalls_lds runs scripts/generate_initcall_order.pl via
jobserver-exec; a perl failure was masked by the wrapper.
Return the subprocess exit code from main() and pass it to sys.exit()
so the wrapped command's status reaches make.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/660368ca16e2d3845577a9fd157d2f37f0e09e85.1779908995.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
||
|
Daniel Golle
|
1e8a9af95a |
dt-bindings: add DTS style checker
Add a Python tool that checks DTS coding style on examples in YAML binding files and on .dts/.dtsi/.dtso source files. Rules are kept in a small declarative registry, each tagged 'relaxed' (default; must be zero-violation on the current tree) or 'strict' (opt-in for new submissions). Promoting a rule from strict to relaxed is a one-line edit once the tree is clean. Relaxed mode covers trailing whitespace, tab characters in YAML examples, mixed tab+space indents, and missing tabs in .dts files. Strict adds indent unit and consistency checks, blank-line placement, sibling address ordering, "compatible" and "reg" ordering, and unused labels. The tool reads file paths from @argfile and parallelises across CPUs via -j N. With no -j given it picks up $PARALLELISM (set by scripts/jobserver-exec from the GNU make jobserver) and falls back to os.cpu_count() otherwise. Running as one Python invocation amortises the ruamel.yaml import across the whole tree -- ~2s on a 32-CPU host vs ~28s sequential. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/224923f3d1c73ff55cebb3e0796f119e32c1bb43.1779908995.git.daniel@makrotopia.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Jan Polensky
|
3f70ebe638 |
s390: Enable Rust support
Enable building Rust code on s390 by wiring the architecture into the kernel Rust infrastructure. Add s390 to the Rust arch support documentation, provide the s390 Rust target and required compiler flags, and set the bindgen target for arch/s390. Adjust the Rust target generation and minimum rustc version gating so the s390 setup is handled explicitly. The Rust toolchain uses the "s390x" triple naming for the 64 bit target. Rust support is currently incompatible with CONFIG_EXPOLINE, which relies on compiler support for the -mindirect-branch= and -mfunction_return= options. Therefore, select HAVE_RUST only when EXPOLINE is disabled. Acked-by: Miguel Ojeda <ojeda@kernel.org> Acked-by: Gary Guo <gary@garyguo.net> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Jan Polensky <japo@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Ethan Nelson-Moore
|
1a1e62a5a4
|
kconfig: tests: fix typo in comment
scripts/kconfig/tests/no_write_if_dep_unmet/__init__.py contains a typo "COFIG_" for "CONFIG_". Fix it. Discovered while searching for typos in CONFIG_* variable references. Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Link: https://patch.msgid.link/20260609021712.7965-1-enelsonmoore@gmail.com Signed-off-by: Nathan Chancellor <nathan@kernel.org> |
||
|
Miguel Ojeda
|
5060549804 |
rust: zerocopy-derive: enable support in kbuild
With all the new files in place and ready from the new crate, enable the support for it in the build system. In addition, skip formatting for this vendored crate. Link: https://patch.msgid.link/20260608141439.182634-18-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Miguel Ojeda
|
567621523a |
rust: zerocopy: enable support in kbuild
With all the new files in place and ready from the new crate, enable the support for it in the build system. In addition, skip formatting for this vendored crate. Finally, there are no generated symbols expected from `zerocopy`, thus skip adding the `exports` generation. Link: https://patch.msgid.link/20260608141439.182634-13-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Miguel Ojeda
|
8b1549eee9 |
scripts: generate_rust_analyzer: support passing env vars
A future commit adding `zerocopy` support will need to pass an environment variable during its build. Thus add support for an `--envs` parameter, similar to `--cfgs`, that allows to pass a map of variables to set for a given crate. This allows us to keep a single source of truth for those values. No change intended in the generated `rust-project.json`. Acked-by: Tamir Duberstein <tamird@kernel.org> Link: https://patch.msgid.link/20260608141439.182634-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Linus Torvalds
|
d054796f8b |
Rust fixes for v7.1 (2nd)
Toolchain and infrastructure:
- Fix 'rustc-option' (the Makefile one) when cross-compiling that leads
to build or boot failures in certain configs.
- Work around a Rust compiler bug (already fixed for Rust 1.98.0) thats
lead to boot failures in certain configs due to missing 'uwtable'
LLVM module flags.
- Support a Rust compiler change (starting with Rust 1.98.0) in the
unstable target specification JSON files.
- Forbid Rust + arm + KASAN configs, which do not build.
'kernel' crate:
- Fix NOMMU build by adding a missing helper.
-----BEGIN PGP SIGNATURE-----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=7GFy
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix 'rustc-option' (the Makefile one) when cross-compiling that
leads to build or boot failures in certain configs
- Work around a Rust compiler bug (already fixed for Rust 1.98.0)
thats lead to boot failures in certain configs due to missing
'uwtable' LLVM module flags
- Support a Rust compiler change (starting with Rust 1.98.0) in the
unstable target specification JSON files
- Forbid Rust + arm + KASAN configs, which do not build
'kernel' crate:
- Fix NOMMU build by adding a missing helper"
* tag 'rust-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: x86: support Rust >= 1.98.0 target spec
rust: arm64: set uwtable llvm module flag for CONFIG_UNWIND_TABLES
rust: helpers: add is_vmalloc_addr wrapper for NOMMU builds
rust: kasan/kbuild: fix rustc-option when cross-compiling
ARM: Do not select HAVE_RUST when KASAN is enabled
|
||
|
James Lee
|
29c5290733
|
modpost: Add __llvm_covfun and __llvm_covmap to section_white_list
Modpost emits hundreds of warnings when using Clang to build for ARCH=um
and CONFIG_GCOV=y. e.g.:
vmlinux (__llvm_covfun): unexpected non-allocatable section.
Did you forget to use "ax"/"aw" in a .S file?
Note that for example <linux/init.h> contains
section definitions for use in .S files.
For example, when we use LLVM for a kunit user mode build with coverage:
python3 tools/testing/kunit/kunit.py build --make_options LLVM=1 \
--kunitconfig=tools/testing/kunit/configs/default.config \
--kunitconfig=tools/testing/kunit/configs/coverage_uml.config
The behaviour occurs when building the kernel for ARCH=um with code
coverage enabled. The warnings come from modpost's check_sec_ref
function, which ensures no sections reference others that will be
discarded. covfun and covmap sections must reference __init and __exit
sections to collect coverage data, triggering the modpost warning.
To suppress these warnings, these section names have been added to
modpost's whitelist. This is unlikely to suppress legitimate warnings as
Clang will only insert these sections when building with coverage, and
can be assumed to manage these references safely.
Signed-off-by: James Lee <james@codeconstruct.com.au>
Link: https://patch.msgid.link/20260604-dev-coverage-patch-v1-1-9f9368253cb4@codeconstruct.com.au
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
||
|
Zhou Yuhang
|
65b09bfa8a
|
kconfig: Fix repeated include selftest expectation
The err_repeated_inc test was added with an expected stderr fixture
that does not match the diagnostic printed by kconfig.
Running "make testconfig" currently fails in that test even though the
parser reports the duplicated include correctly:
[stderr]
Kconfig.inc1:4: error: repeated inclusion of Kconfig.inc3
Kconfig.inc2:3: note: location of first inclusion of Kconfig.inc3
The fixture expects "Repeated" and "Location" with capital letters, but
the diagnostic emitted by scripts/kconfig/util.c uses lowercase words.
Update the fixture to match the real message.
Fixes:
|
||
|
Miguel Ojeda
|
7594302d9d |
kbuild: rust: rename flag to -Zdebuginfo-for-profiling for Rust >= 1.98
Starting with Rust 1.98.0 (expected 2026-08-20), the
`-Zdebug-info-for-profiling` flag has been renamed to
`-Zdebuginfo-for-profiling` (i.e. one less dash, to match `debuginfo`s
in other flags) [1].
Without this change, one gets in the latest nightlies:
error: unknown unstable option: `debug-info-for-profiling`
Thus pass the right name.
Link: https://github.com/rust-lang/rust/pull/156887 [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260602151638.14358-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
|
Andrew Jones
|
f58316a441
|
kconfig: add kconfig-sym-check static checker
Add 'make kconfig-sym-check', a static checker that finds Kconfig symbols referenced in expressions (select, depends on, default, etc.) but never defined via config/menuconfig anywhere in the tree. New dangling symbols are reported as errors (exit 1) unless they are listed in an exclusion file, e.g. KCONFIG_SYM_CHECK_EXCLUDES=sym-check-excludes make kconfig-sym-check The exclusion file lists one symbol per line; blank lines and lines starting with '#' are ignored. The checker also warns about uppercase N/Y/M used as tristate literal values following the same logic as checkpatch. This new static checker is the script used for [1] with a few improvements to avoid some false positives. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216748 [1] Assisted-by: Claude:claude-sonnet-4-6 Signed-off-by: Andrew Jones <andrew.jones@linux.dev> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Julian Braha <julianbraha@gmail.com> Tested-by: Nicolas Schier <nsc@kernel.org> Acked-by: Nicolas Schier <nsc@kernel.org> Link: https://patch.msgid.link/20260527142703.107110-1-andrew.jones@linux.dev Signed-off-by: Nathan Chancellor <nathan@kernel.org> |
||
|
Nathan Chancellor
|
a48bd961fb
|
kbuild: Remove unnecessary 'T' modifier in cmd_ar_builtin_fixup
In cmd_ar_builtin_fixup, the 'T' modifier was added to '$(AR) mPi' to work around a bug in llvm-ar that caused thin archives to be silently converted to full archives [1]. Since commit |
||
|
Frederic Weisbecker
|
29807c524d |
tick/sched: Remove unused fields
Remove fields after the dyntick-idle cputime migration to scheduler code. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> Link: https://patch.msgid.link/20260508131647.43868-11-frederic@kernel.org |
||
|
Miguel Ojeda
|
905b06d32a |
rust: x86: support Rust >= 1.98.0 target spec
Starting with Rust 1.98.0 (expected 2026-08-20), the target spec will not
support `x86-softfloat` anymore [1]. Instead, `softfloat` should be used,
which is an alias. Otherwise, one gets:
error: error loading target specification: rustc-abi: invalid rustc abi: 'x86-softfloat'. allowed values: 'x86-sse2', 'softfloat' at line 3 column 32
|
= help: run `rustc --print target-list` for a list of built-in targets
Thus conditionally use one or the other depending on the version.
The alias has existed since Rust 1.95.0 (released 2026-04-16) [2], but
use the newer version instead to avoid changing how the build works for
existing compilers, at least until more testing takes place.
Cc: Ralf Jung <post@ralfj.de>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/157151 [1]
Link: https://github.com/rust-lang/rust/pull/151154 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260530114925.260754-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
|
Rong Xu
|
9f2aee8f7d
|
kbuild: distributed build support for Clang ThinLTO
Add distributed ThinLTO build support for the Linux kernel.
This new mode offers several advantages: (1) Increased
flexibility in handling user-specified build options.
(2) Improved user-friendliness for developers. (3) Greater
convenience for integrating with objtool and livepatch.
Note that "distributed" in this context refers to a term
that differentiates in-process ThinLTO builds by invoking
backend compilation through the linker, not necessarily
building in distributed environments.
Distributed ThinLTO is enabled via the
`CONFIG_LTO_CLANG_THIN_DIST` Kconfig option. For example:
> make LLVM=1 defconfig
> scripts/config -e LTO_CLANG_THIN_DIST
> make LLVM=1 oldconfig
> make LLVM=1 vmlinux -j <..>
The build flow proceeds in four stages:
1. Perform FE compilation, mirroring the in-process ThinLTO mode.
2. Thin-link the generated IR files and object files.
3. Find all IR files and perform BE compilation, using the flags
stored in the .*.o.cmd files.
4. Link the BE results to generate the final vmlinux.o.
NOTE: This patch currently implements the build for the main kernel
image (vmlinux) only. Kernel module support is planned for a
subsequent patch.
Tested on the following arch: x86, arm64, loongarch, and
riscv.
The earlier implementation details can be found here:
https://discourse.llvm.org/t/rfc-distributed-thinlto-build-for-kernel/85934
Signed-off-by: Rong Xu <xur@google.com>
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Piotr Gorski <piotrgorski@cachyos.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260529185347.2418373-4-xur@google.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
||
|
Masahiro Yamada
|
9c72d26e9f
|
kbuild: move vmlinux.a build rule to scripts/Makefile.vmlinux_a
Move the build rule for vmlinux.a to a separate file in preparation for supporting distributed builds with Clang ThinLTO. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Rong Xu <xur@google.com> Tested-by: Piotr Gorski <piotrgorski@cachyos.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Rong Xu <xur@google.com> Link: https://patch.msgid.link/20260529185347.2418373-2-xur@google.com [nathan: Squash in forward fix from Rong around '--thin' to $(AR) https://patch.msgid.link/20260529185347.2418373-3-xur@google.com] Signed-off-by: Nathan Chancellor <nathan@kernel.org> |
||
|
Yury Norov
|
c210dfaa27 |
scripts/bloat-o-meter: ignore _sdata
_sdata is a linker symbol, but bloat-o-meter may consider it as a real variable: $ scripts/bloat-o-meter vmlinux.orig vmlinux add/remove: 7/1 grow/shrink: 0/0 up/down: 3437/-4096 (-659) Function old new delta crc32table_le - 1024 +1024 crc32table_be - 1024 +1024 crc32ctable_le - 1024 +1024 byte_rev_table - 256 +256 crc32_be - 39 +39 crc32c - 35 +35 crc32_le - 35 +35 _sdata 4096 - -4096 Total: Before=8592564398, After=8592563739, chg -0.00% With the patch: $ scripts/bloat-o-meter vmlinux.orig vmlinux add/remove: 7/0 grow/shrink: 0/0 up/down: 3437/0 (3437) Function old new delta crc32table_le - 1024 +1024 crc32table_be - 1024 +1024 crc32ctable_le - 1024 +1024 byte_rev_table - 256 +256 crc32_be - 39 +39 crc32c - 35 +35 crc32_le - 35 +35 Total: Before=8592560302, After=8592563739, chg +0.00% Link: https://lore.kernel.org/20260504203606.427972-1-ynorov@nvidia.com Signed-off-by: Yury Norov <ynorov@nvidia.com> Cc: Valtteri Koskivuori <vkoskiv@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sasha Levin
|
09d8b39563 |
get_maintainer: add --json output mode
Add a --json flag to get_maintainer.pl that emits structured JSON output, making results machine-parseable for CI systems, IDE integrations, and AI-assisted development tools. The JSON output includes a maintainers array with structured name, email, and role fields, plus optional arrays for scm, status, subsystem, web, and bug information when those flags are enabled. Normal text output behavior is completely unchanged when --json is not specified. Assisted-by: Claude:claude-opus-4-6 Link: https://lore.kernel.org/20260408194542.1354549-1-sashal@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Joe Perches
|
1877a09b64 |
checkpatch: add check for function pointer arrays in declarations
checkpatch did not allow function pointer arrays when testing declaration blocks. Add it. Link: https://lore.kernel.org/eb62763085eb42193a611bca00a62d6f0ae72e1e.1776530118.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Dan Carpenter <dan.carpenter@linaro.org> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Petr Vorel
|
b8979a02f9 |
checkpatch: add option to not force /* */ for SPDX
Add option --spdx-cxx-comments to not force C comments (/* */) for SPDX,
but allow also C++ comments (//).
As documented in
|
||
|
Petr Vorel
|
2ddfdfe1ad |
checkpatch: allow passing config directory
checkpatch.pl searches for .checkpatch.conf in $CWD, $HOME and $CWD/.scripts. Allow passing a single directory via CHECKPATCH_CONFIG_DIR environment variable (empty value is ignored). This allows to directly use project configuration file for projects which vendored checkpatch.pl (e.g. LTP or u-boot). Although it'd be more convenient for user to have --conf-dir option (instead of using environment variable), code would get ugly because options from the configuration file needs to be read before processing command line options with Getopt::Long. While at it, document directories and environment variable in -h help and HTML doc. Link: https://lore.kernel.org/20260421211408.383972-1-pvorel@suse.cz Signed-off-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Perches <joe@perches.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Alexandre Courbot
|
d7231d8cb2
|
scripts: modpost: detect and report truncated buf_printf() output
buf_printf() uses a fixed-size stack buffer. vsnprintf() returns the number of bytes that *would* have been written to that buffer, which can be larger than the size of said buffer if the formatted string is too long. The problem is that whenever this happens buf_printf() currently passes this length, unchecked, to buf_write(), which silently reads past the stack buffer and copies invalid data into the output buffer. Fix this by detecting vsnprintf() failures and truncations before appending to the output buffer, and report a fatal error instead of producing corrupt symbol names. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://patch.msgid.link/20260527-nova-exports-v2-1-06de4c556d55@nvidia.com Signed-off-by: Nathan Chancellor <nathan@kernel.org> |
||
|
Yafang Shao
|
159921d63d
|
kbuild: rpm-pkg: append %{?dist} macro to Release tag
Add support for the %{?dist} macro in the kernel.spec file. This enables
building and releasing kernel RPMs with a custom distribution suffix
(e.g., via rpmbuild's --define option) to better match production
environment tracking.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://patch.msgid.link/20260526062732.84006-1-laoar.shao@gmail.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
||
|
Philipp Hahn
|
c10ba5c9c6
|
run-clang-tools: run multiprocessing.Pool as context manager
`multiprocessing.pool.Pool()` should be used as a context manager so Python can free its internal resources and do a proper cleanup.[1] While at it move the code to read the `compiler_commands.json` so the opened file can be closed before the sub-processes are fork()ed. Link: https://docs.python.org/3/library/multiprocessing.html#multiprocessing.pool.Pool [1] Signed-off-by: Philipp Hahn <phahn-oss@avm.de> Link: https://patch.msgid.link/40180613bef84946c45d6fbeb4bb274573cd0beb.1778849135.git.phahn-oss@avm.de Signed-off-by: Nathan Chancellor <nathan@kernel.org> |
||
|
Nathan Chancellor
|
2a35c63c6b
|
scripts/Makefile.warn: Drop -Wformat handling for clang < 16
Now that the minimum supported version of LLVM for building the kernel has been raised to 17.0.1, the block dealing with -Wformat with clang prior to 16 can be removed since the condition for its inclusion is always false. Reviewed-by: Nicolas Schier <nsc@kernel.org> Link: https://patch.msgid.link/20260517-bump-minimum-supported-llvm-version-to-17-v2-10-b3b8cda46bdd@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> |