bnep_add_connection() needs to keep holding the bnep_session_sem while
reading dev->name (just like bnep_get_connlist() does); otherwise the
bnep_session() thread can concurrently free the net_device, which can for
example be triggered by a concurrent bnep_del_connection().
(This UAF is fairly uninteresting from a security perspective;
calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN)
check. It also requires completely tearing down a netdev during a fairly
tight race window.)
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit 1c08108f30 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end
warnings") converted the on-stack request PDU in l2cap_ecred_reconfigure()
from an explicit packed struct to DEFINE_RAW_FLEX(), but did not adjust the
size and source-pointer arguments to l2cap_send_cmd():
- struct {
- struct l2cap_ecred_reconf_req req;
- __le16 scid;
- } pdu;
+ DEFINE_RAW_FLEX(struct l2cap_ecred_reconf_req, pdu, scid, 1);
...
l2cap_send_cmd(conn, chan->ident, L2CAP_ECRED_RECONF_REQ,
sizeof(pdu), &pdu);
After the conversion, DEFINE_RAW_FLEX() expands to declare an anonymous
union pdu_u plus a local pointer "pdu" pointing at it. Therefore:
- sizeof(pdu) is now sizeof(struct l2cap_ecred_reconf_req *) = 8 on
64-bit (4 on 32-bit), not the 6 bytes of (mtu, mps, scid[1]).
- &pdu is the address of the local pointer's stack storage, not the
address of the request payload.
l2cap_send_cmd() forwards (data, count) to l2cap_build_cmd(), which calls
skb_put_data(skb, data, count). The L2CAP_ECRED_RECONFIGURE_REQ packet
body therefore contains 8 bytes copied from the kernel stack starting at
&pdu -- the 8 bytes overlap the pdu pointer's value, leaking a kernel
stack address to the paired Bluetooth peer. The intended (mtu, mps, scid)
fields are not transmitted at all, so the peer rejects the request as
malformed and the L2CAP_ECRED_RECONFIGURE feature itself has been broken
for the local-side initiator since the introducing commit landed.
The sibling site l2cap_ecred_conn_req() in the same commit was converted
correctly (sizeof(*pdu) + len, pdu); only this site was missed.
Restore the original semantics: pass the full flex-struct size via
struct_size(pdu, scid, 1) and the pdu pointer (the struct address) as
the source.
Validated on a stock 7.0-based host kernel via the real call path:
setsockopt(SOL_BLUETOOTH, BT_RCVMTU, ...) on a BT_CONNECTED
L2CAP_MODE_EXT_FLOWCTL socket emits an L2CAP_ECRED_RECONFIGURE_REQ
whose body is 8 bytes (the on-stack pdu local's value) rather than
the expected 6. Three captures from fresh socket / fresh hciemu peer
on the same host -- low bytes vary per call, high 0xffff confirms a
kernel virtual address (KASLR-randomised stack slot, not a fixed
string):
RECONF_REQ body (ident=0x02 len=8): 42 fb 54 af 0e ca ff ff
RECONF_REQ body (ident=0x02 len=8): 52 3d 2e af 0e ca ff ff
RECONF_REQ body (ident=0x02 len=8): b2 fc 5b af 0e ca ff ff
After this patch the body is 6 bytes carrying the expected
little-endian (mtu, mps, scid).
Cc: stable@vger.kernel.org
Fixes: 1c08108f30 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_sock_poll() walks the accept queue without synchronization, while
child teardown can unlink the same socket and drop its last reference.
The unsynchronized accept queue walk has existed since the initial
Bluetooth import.
Protect accept_q with a dedicated lock for queue updates and polling.
Also rework bt_accept_dequeue() to take temporary child references under
the queue lock before dropping it and locking the child socket.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Jann Horn <jannh@google.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit dbf666e4fc ("Bluetooth: HIDP: Fix possible UAF") made
hidp_session_remove() drop the L2CAP reference and set
session->conn = NULL once the session is considered removed, and
added a bare if (session->conn) guard around the kthread-exit
l2cap_unregister_user() call in hidp_session_thread(). The sibling
ioctl site in hidp_connection_del() still reads session->conn
unlocked and unguarded, and the kthread-exit guard itself is a
lockless double-read.
hidp_session_find() drops hidp_session_sem before returning, so
hidp_session_remove() can null session->conn between the lookup and
the call in hidp_connection_del(). Worse, since commit 752a6c9596
("Bluetooth: L2CAP: Fix use-after-free in l2cap_unregister_user")
takes mutex_lock(&conn->lock) inside l2cap_unregister_user(), a
stale non-NULL snapshot also UAFs on conn->lock. v1 only added an
if (session->conn) guard at the ioctl site, which doesn't address
either race; Luiz suggested snapshotting session->conn under the
sem and clearing it before the call.
Taking hidp_session_sem across l2cap_unregister_user() would be
wrong: l2cap_conn_del() already establishes the lock order
conn->lock -> hidp_session_sem
via l2cap_unregister_all_users() -> user->remove ==
hidp_session_remove(), so taking hidp_session_sem before conn->lock
would AB/BA deadlock.
Factor a helper hidp_session_unregister_conn() that under
down_write(&hidp_session_sem) snapshots session->conn and clears
the member, then outside the sem calls l2cap_unregister_user() and
l2cap_conn_put() on the snapshot. Call it from both
hidp_connection_del() and hidp_session_thread()'s exit path. At
most one consumer wins the write-sem; later callers observe
session->conn == NULL and skip the unregister and put, so the
reference hidp_session_new() took via l2cap_conn_get() is consumed
exactly once. session_free() already tolerates a NULL session->conn.
Fixes: dbf666e4fc ("Bluetooth: HIDP: Fix possible UAF")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Link: https://lore.kernel.org/all/20260422011437.176643-1-michael.bommarito@gmail.com/
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_big_sync_established_evt() currently does:
conn->num_bis = 0;
memset(conn->bis, 0, sizeof(conn->num_bis));
sizeof(conn->num_bis) is wrong - it would make sense to either use
conn->num_bis (before setting that to 0) or sizeof(conn->bis).
Fix it by using sizeof(conn->bis), the least intrusive change.
Luckily, nothing actually depends on this memset() working properly:
Nothing seems to ever read from conn->bis beyond conn->num_bis, and when
conn->num_bis is increased, the corresponding elements of conn->bis are
initialized. So I think this line could also just be removed.
This is a purely theoretical fix and should have no impact on actual
behavior.
Fixes: 42ecf19471 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
rfcomm_recv_data() treats the first payload byte as a credit field when
the UIH frame carries PF and credit-based flow control is enabled.
After the header has been stripped, the PF/CFC path consumes that byte
with a direct skb->data dereference followed by skb_pull(). A malformed
short frame can reach this path without a byte available.
Use skb_pull_data() so the length check and pull happen together before
the returned credit byte is consumed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Several iso_pi(sk) fields (qos, qos_user_set, bc_sid, base, base_len,
sync_handle, bc_num_bis) are written under lock_sock in
iso_sock_setsockopt() and iso_sock_bind(), but read and written under
hci_dev_lock only in two other paths:
- iso_connect_bis() / iso_connect_cis(), invoked from connect(2),
read qos/base/bc_sid and reset qos to default_qos on the
qos_user_set validation failure -- all without lock_sock.
- iso_connect_ind(), invoked from hci_rx_work, writes sync_handle,
bc_sid, qos.bcast.encryption, bc_num_bis, base and base_len on
PA_SYNC_ESTABLISHED / PAST_RECEIVED / BIG_INFO_ADV_REPORT /
PER_ADV_REPORT events. The BIG_INFO handler additionally passes
&iso_pi(sk)->qos together with sync_handle / bc_num_bis / bc_bis
to hci_conn_big_create_sync() while setsockopt may be mutating
them.
Acquire lock_sock around the affected accesses in both paths.
The locking order hci_dev_lock -> lock_sock matches the existing
iso_conn_big_sync() precedent, whose comment documents the same
requirement for hci_conn_big_create_sync(). The HCI connect/bind
helpers do not wait for command completion -- they enqueue work via
hci_cmd_sync_queue{,_once}() / hci_le_create_cis_pending() and
return -- so the added hold time is comparable to iso_conn_big_sync().
KCSAN report:
BUG: KCSAN: data-race in iso_connect_cis / iso_sock_setsockopt
read to 0xffffa3ae8ce3cdc8 of 1 bytes by task 335 on cpu 0:
iso_connect_cis+0x49f/0xa20
iso_sock_connect+0x60e/0xb40
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
write to 0xffffa3ae8ce3cdc8 of 60 bytes by task 334 on cpu 1:
iso_sock_setsockopt+0x69a/0x930
do_sock_setsockopt+0xc3/0x170
__sys_setsockopt+0xd1/0x130
__x64_sys_setsockopt+0x64/0x80
x64_sys_call+0x1547/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 334 Comm: iso_setup_race Not tainted 7.0.0-10949-g8541d8f725c6 #44 PREEMPT(lazy)
The iso_connect_ind() races were found by inspection.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_sock_connect() copies the destination address into
iso_pi(sk)->dst under lock_sock, then releases the lock and reads
it back with bacmp() to decide between the CIS and BIS connect
paths:
lock_sock(sk);
bacpy(&iso_pi(sk)->dst, &sa->iso_bdaddr);
iso_pi(sk)->dst_type = sa->iso_bdaddr_type;
release_sock(sk);
if (bacmp(&iso_pi(sk)->dst, BDADDR_ANY)) // <- no lock held
This read after release_sock() races with any concurrent write to
iso_pi(sk)->dst on the same socket.
Fix by reading the destination address directly from the local
sockaddr argument (sa->iso_bdaddr) instead of iso_pi(sk)->dst.
Since sa is a function-local argument, reading it requires no
locking and avoids the race.
This patch addresses only the bacmp() race in iso_sock_connect();
other unprotected iso_pi(sk) accesses are fixed separately in the
next patch.
KCSAN report:
BUG: KCSAN: data-race in memcmp+0x39/0xb0
race at unknown origin, with read to 0xffff8f96ea66dde3 of 1 bytes by task 549 on cpu 1:
memcmp+0x39/0xb0
iso_sock_connect+0x275/0xb40
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00 -> 0xee
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 549 Comm: iso_race_combin Not tainted 7.0.0-08391-g1d51b370a0f8 #40 PREEMPT(lazy)
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sk deref in sco_conn_ready must be done either under conn->lock, or
holding a refcount, to avoid concurrent close. conn->sk and parent sk is
currently accessed without either, and without checking parent->sk_state:
[Task 1] [Task 2]
sco_sock_release
sco_conn_ready
sk = conn->sk
lock_sock(sk)
conn->sk = NULL
lock_sock(sk)
release_sock(sk)
sco_sock_kill(sk)
UAF on sk deref
and similarly for access to sco_get_sock_listen() return value.
Fix possible UAF by holding sk refcount in sco_conn_ready() and making
sco_get_sock_listen() increase refcount. Also recheck after lock_sock
that the socket is still valid. Adjust conn->sk locking so it's
protected also by lock_sock() of the associated socket if any.
Fixes: 27c24fda62 ("Bluetooth: switch to lock_sock in SCO")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb().
Fixes: 80808e431e ("Bluetooth: Add l2cap_chan_ops abstraction")
Cc: stable@kernel.org
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb().
Fixes: 8d836d71e2 ("Bluetooth: Access sk_sndtimeo indirectly in l2cap_core.c")
Cc: stable@kernel.org
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb().
Fixes: 89bc500e41 ("Bluetooth: Add state tracking to struct l2cap_chan")
Cc: stable@kernel.org
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a BLE peripheral sends an L2CAP Connection Parameter Update Request
the processing path is:
process_pending_rx() [takes conn->lock]
l2cap_le_sig_channel()
l2cap_conn_param_update_req()
hci_le_conn_update() [takes hdev->lock]
Meanwhile other code paths take the locks in the opposite order:
l2cap_chan_connect() [takes hdev->lock]
...
mutex_lock(&conn->lock)
l2cap_conn_ready() [hdev->lock via hci_cb_list_lock]
...
mutex_lock(&conn->lock)
This is a classic AB/BA deadlock which lockdep reports as a circular
locking dependency when connecting a BLE MIDI keyboard (Carry-On FC-49).
Fix this by making hci_le_conn_update() defer the HCI command through
hci_cmd_sync_queue() so it no longer needs to take hdev->lock in the
caller context. The sync callback uses __hci_cmd_sync_status_sk() to
wait for the HCI_EV_LE_CONN_UPDATE_COMPLETE event, then updates the
stored connection parameters (hci_conn_params) and notifies userspace
(mgmt_new_conn_param) only after the controller has confirmed the update.
A reference on hci_conn is held via hci_conn_get()/hci_conn_put() for
the lifetime of the queued work to prevent use-after-free, and
hci_conn_valid() is checked before proceeding in case the connection was
removed while the work was pending. The hci_dev_lock is held across
hci_conn_valid() and all conn field accesses to prevent a concurrent
disconnect from invalidating the connection mid-use.
Fixes: f044eb0524 ("Bluetooth: Store latency and supervision timeout in connection params")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The L2CAP specification states that if more than one channel is being
reconfigured, the MPS shall not be decreased. The current check has
two issues:
1) The comparison uses >= (greater-than-or-equal), which incorrectly
rejects reconfiguration requests where the MPS stays the same.
Since the spec says MPS "shall be greater than or equal to the
current MPS", only a strict decrease (remote_mps > mps) should be
rejected. Keeping the same MPS is valid.
2) The multi-channel guard uses `&& i` (loop index) to approximate
"more than one channel", but this incorrectly allows MPS decrease
for the first channel (i==0) even when multiple channels are being
reconfigured. Replace with `&& num_scid > 1` which correctly
checks whether the request covers more than one channel.
Fixes: 7accb1c432 ("Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In bnep_rx_frame(), the BNEP_FILTER_NET_TYPE_SET and
BNEP_FILTER_MULTI_ADDR_SET extension header parsing has two bugs:
1) The 2-byte length field is read with *(u16 *)(skb->data + 1), which
performs a native-endian read. The BNEP protocol specifies this field
in big-endian (network byte order), and the same file correctly uses
get_unaligned_be16() for the identical fields in
bnep_ctrl_set_netfilter() and bnep_ctrl_set_mcfilter().
2) The length is multiplied by 2, but unlike BNEP_SETUP_CONN_REQ where
the length byte counts UUID pairs (requiring * 2 for two UUIDs per
entry), the filter extension length field already represents the total
data size in bytes. This is confirmed by bnep_ctrl_set_netfilter()
which reads the same field as a byte count and divides by 4 to get
the number of filter entries.
The bogus * 2 means skb_pull advances twice as far as it should,
either dropping valid data from the next header or causing the pull
to fail entirely when the doubled length exceeds the remaining skb.
Fix by splitting the pull into two steps: first use skb_pull_data() to
safely pull and validate the 3-byte fixed header (ctrl type + length),
then pull the variable-length data using the properly decoded length.
Fixes: bf8b9a9cb7 ("Bluetooth: bnep: Add support to extended headers of control frames")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_create_big_complete_evt() iterates over BT_BOUND connections for
a BIG handle using a while loop, accessing ev->bis_handle[i++] on each
iteration. However, there is no check that i stays within ev->num_bis
before the array access.
When a controller sends a LE_Create_BIG_Complete event with fewer
bis_handle entries than there are BT_BOUND connections for that BIG,
or with num_bis=0, the loop reads beyond the valid bis_handle[] flex
array into adjacent heap memory. Since the out-of-bounds values
typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle()
rejects them and the connection remains in BT_BOUND state. The same
connection is then found again by hci_conn_hash_lookup_big_state(),
creating an infinite loop with hci_dev_lock held.
Fix this by terminating the BIG if in case not all BIS could be setup
properly.
Fixes: a0bfde167b ("Bluetooth: ISO: Add support for connecting multiple BISes")
Cc: stable@vger.kernel.org
Signed-off-by: ZhiTao Ou <hkbinbinbin@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add hci_conn_valid() check in create_big_sync() to detect stale
connections before proceeding with BIG creation. Handle the
resulting -ECANCELED in create_big_complete() and re-validate the
connection under hci_dev_lock() before dereferencing, matching the
pattern used by create_le_conn_complete() and create_pa_complete().
Keep the hci_conn object alive across the async boundary by taking
a reference via hci_conn_get() when queueing create_big_sync(), and
dropping it in the completion callback. The refcount and the lock
are complementary: the refcount keeps the object allocated, while
hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on
hdev->conn_hash, as required by hci_conn_del().
hci_conn_put() is called outside hci_dev_unlock() so the final put
(which resolves to kfree() via bt_link_release) does not run under
hdev->lock, though the release path would be safe either way.
Without this, create_big_complete() would unconditionally
dereference the conn pointer on error, causing a use-after-free
via hci_connect_cfm() and hci_conn_del().
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Cc: stable@vger.kernel.org
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sco_conn_ready calls sleeping functions under conn->lock spinlock.
The critical section can be reduced: conn->hcon is modified only with
hdev->lock held. It is guaranteed to be held in sco_conn_ready, so
conn->lock is not needed to guard it.
Move taking conn->lock after lock_sock(parent). This also follows the
lock ordering lock_sock() > conn->lock elsewhere in the file.
Fixes: 27c24fda62 ("Bluetooth: switch to lock_sock in SCO")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove the ISDN (mISDN, CAPI) subsystem and Bluetooth CMTP protocol
from the kernel tree.
ISDN is a pretty old technology and it's unclear whether anyone still
uses it. I went over the last few years of git history and all the
commits are either tree-wide conversions or syzbot/static analyzer
fixes.
When we discussed removal in the past IIRC there were some concerns
about ISDN still being used in parts of Germany. Unfortunately, the
code base is quite old, none of the current maintainers are familiar
with it and AI tools will have a field day finding bugs here.
Delete this code and preserve it in an out-of-tree repository
for any remaining users:
https://github.com/linux-netdev/mod-orphan
UAPI constants AF_ISDN/PF_ISDN and the SELinux isdn_socket class
are preserved for ABI stability, but the rest of uAPI is removed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260421022108.1299678-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Core & protocols
----------------
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP.
- Number of code moves to help the compiler with inlining.
Avoid output arguments for returning drop reason where possible.
- Rework drop handling within qdiscs to include more metadata
about the reason and dropping qdisc in the tracepoints.
- Remove the rtnl_lock use from IP Multicast Routing.
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two.
- Report TCP delayed ack timer information via socket diag.
- Add ip_local_port_step_width sysctl to allow distributing the randomly
selected ports more evenly throughout the allowed space.
- Add support for per-route tunsrc in IPv6 segment routing.
- Start work of switching sockopt handling to iov_iter.
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up.
- Support MSG_EOR in MPTCP.
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage.
- Remove UDP-Lite support (as announced in 2023).
- Remove support for building IPv6 as a module.
Remove the now unnecessary function calling indirection.
Cross-tree stuff
----------------
- Move Michael MIC code from generic crypto into wireless,
it's considered insecure but some WiFi networks still need it.
Netfilter
---------
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate.
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex.
- Add more opinionated input validation to lower security exposure.
- Make IPVS hash tables to be per-netns and resizable.
Wireless
--------
- Finished assoc frame encryption/EPPKE/802.1X-over-auth.
- Radar detection improvements.
- Add 6 GHz incumbent signal detection APIs.
- Multi-link support for FILS, probe response templates and
client probing.
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware.
Driver API
----------
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs.
- Add standard counters for reporting pause storm events
(implement in mlx5 and fbnic).
- Add configuration API for completion writeback buffering
(implement in mana).
- Support driver-initiated change of RSS context sizes.
- Support DPLL monitoring input frequency (implement in zl3073x).
- Support per-port resources in devlink (implement in mlx5).
Misc
----
- Expand the YAML spec for Netfilter.
Drivers
-------
- Software:
- macvlan: support multicast rx for bridge ports with shared source
MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EhQZ
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
Please consider pulling these changes from the signed vfs-7.1-rc1.kino tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCgAKCRCRxhvAZXjc
otmnAP4sbsxZQdz2TG2hJuOwnEZOkkxZQOUMc3ERVyZaWXIeTAEA7e5M+8FpoG9n
8ipO76UoaXdGLESrqVdp9EOhLqOW7QY=
=uMeJ
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs i_ino updates from Christian Brauner:
"For historical reasons, the inode->i_ino field is an unsigned long,
which means that it's 32 bits on 32 bit architectures. This has caused
a number of filesystems to implement hacks to hash a 64-bit identifier
into a 32-bit field, and deprives us of a universal identifier field
for an inode.
This changes the inode->i_ino field from an unsigned long to a u64.
This shouldn't make any material difference on 64-bit hosts, but
32-bit hosts will see struct inode grow by at least 4 bytes. This
could have effects on slabcache sizes and field alignment.
The bulk of the changes are to format strings and tracepoints, since
the kernel itself doesn't care that much about the i_ino field. The
first patch changes some vfs function arguments, so check that one out
carefully.
With this change, we may be able to shrink some inode structures. For
instance, struct nfs_inode has a fileid field that holds the 64-bit
inode number. With this set of changes, that field could be
eliminated. I'd rather leave that sort of cleanups for later just to
keep this simple"
* tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nilfs2: fix 64-bit division operations in nilfs_bmap_find_target_in_group()
EVM: add comment describing why ino field is still unsigned long
vfs: remove externs from fs.h on functions modified by i_ino widening
treewide: fix missed i_ino format specifier conversions
ext4: fix signed format specifier in ext4_load_inode trace event
treewide: change inode->i_ino from unsigned long to u64
nilfs2: widen trace event i_ino fields to u64
f2fs: widen trace event i_ino fields to u64
ext4: widen trace event i_ino fields to u64
zonefs: widen trace event i_ino fields to u64
hugetlbfs: widen trace event i_ino fields to u64
ext2: widen trace event i_ino fields to u64
cachefiles: widen trace event i_ino fields to u64
vfs: widen trace event i_ino fields to u64
net: change sock.sk_ino and sock_i_ino() to u64
audit: widen ino fields to u64
vfs: widen inode hash/lookup functions to u64
hci_conn lookup and field access must be covered by hdev lock in
hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise
the connection can be freed concurrently.
Extend the hci_dev_lock critical section to cover all conn usage in both
handlers.
Keep the existing keypress notification behavior unchanged by routing
the early exits through a common unlock path.
Fixes: 92a25256f1 ("Bluetooth: mgmt: Implement support for passkey notification")
Cc: stable@vger.kernel.org
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
copy_struct_from_sockptr() fill 'buffer' in
sco_sock_setsockopt() with zeros, so there's no
real problem.
But it actually looks strange to do this,
without checking all of codecs->codecs[0]
really comes from userspace:
sco_pi(sk)->codec = codecs->codecs[0];
As only optlen < sizeof(struct bt_codecs) is checked
and codecs->num_codecs is not checked against != 1,
but only <= 1, and the space for the additional struct bt_codec
is not checked.
Note I don't understand bluetooth and I didn't do any runtime
tests with this! I just found it when debugging a problem
in copy_struct_from_sockptr().
I just added this to check the size is as expected:
BUILD_BUG_ON(struct_size(codecs, codecs, 0) != 1);
BUILD_BUG_ON(struct_size(codecs, codecs, 1) != 8);
And made sure it still compiles using this:
make CF=-D__CHECK_ENDIAN__ W=1ce C=1 net/bluetooth/sco.o
Fixes: 3e643e4efa ("Bluetooth: Improve setsockopt() handling of malformed user input")
Cc: Michal Luczaj <mhal@rbox.co>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: David Wei <dw@davidwei.uk>
Cc: linux-bluetooth@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding
l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file
acquires the lock first. A remote BLE device can send a crafted
L2CAP ECRED reconfiguration response to corrupt the channel list
while another thread is iterating it.
Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(),
and l2cap_chan_unlock() and l2cap_chan_put() after, matching the
pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del().
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.
Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.
Fix by holding the lock.
Fixes: 70c4642563 ("Bluetooth: Refactor connection request handling")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_run_once() needs to indicate whether a queue item was
added, so caller can know if callbacks are called, so it can avoid
leaking resources.
Change the function to return -EEXIST if queue item already exists.
Modify all callsites vs. the changes. The only callsite is
hci_abort_conn().
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Core 6.0, Vol 3, Part A, 3.4.3:
"... If the payload size of any K-frame exceeds the receiver's MPS, the
receiver shall disconnect the channel..."
This fixes L2CAP/LE/CFC/BV-27-C (running together with 'l2test -r -P
0x0027 -V le_public -I 100').
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
Some controller firmwares (eg for MT7925) continuously send invalid ISO
packet, which result to "ISO unknown handle" error spam in logs. It's
not important to show all of them to the user.
Rate limit these ISO error messages, similarly as we do for SCO.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_big_create_sync() uses DEFINE_FLEX to allocate a
struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17)
BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31)
entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller
hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31,
the memcpy that copies conn->bis into cp->bis writes up to 14 bytes
past the stack buffer, corrupting adjacent stack memory.
This is trivially reproducible: binding an ISO socket with
bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will
eventually trigger hci_le_big_create_sync() from the HCI command
sync worker, causing a KASAN-detectable stack-out-of-bounds write:
BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0
Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71
Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to
HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that
conn->bis can actually carry.
Fixes: 42ecf19471 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Cc: stable@vger.kernel.org
Signed-off-by: hkbinbin <hkbinbinbin@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing result.
This also keeps the legacy path aligned with the Secure Connections code,
which already treats JUST_WORKS/JUST_CFM as unauthenticated.
Fixes: fff3490f47 ("Bluetooth: Fix setting correct authentication information for SMP STK")
Cc: stable@vger.kernel.org
Signed-off-by: Oleh Konko <security@1seal.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned.
Fixes: 2b64d153a0 ("Bluetooth: Add MITM mechanism to LE-SMP")
Cc: stable@vger.kernel.org
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Oleh Konko <security@1seal.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mesh_send() currently bounds MGMT_OP_MESH_SEND by total command
length, but it never verifies that the bytes supplied for the
flexible adv_data[] array actually match the embedded adv_data_len
field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a
truncated command can still pass the existing 20..50 byte range
check and later drive the async mesh send path past the end of the
queued command buffer.
Keep rejecting zero-length and oversized advertising payloads, but
validate adv_data_len explicitly and require the command length to
exactly match the flexible array size before queueing the request.
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn lookup and field access must be covered by hdev lock in
hci_le_remote_conn_param_req_evt, otherwise it's possible it is freed
concurrently.
Extend the hci_dev_lock critical section to cover all conn usage.
Fixes: 95118dd4ed ("Bluetooth: hci_event: Use of a function table to handle LE subevents")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn lookup and field access must be covered by hdev lock in
set_cig_params_sync, otherwise it's possible it is freed concurrently.
Take hdev lock to prevent hci_conn from being deleted or modified
concurrently. Just RCU lock is not suitable here, as we also want to
avoid "tearing" in the configuration.
Fixes: a091289218 ("Bluetooth: hci_conn: Fix hci_le_set_cig_params")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Load Long Term Keys stores the user-provided enc_size and later uses
it to size fixed-size stack operations when replying to LE LTK
requests. An enc_size larger than the 16-byte key buffer can therefore
overflow the reply stack buffer.
Reject oversized enc_size values while validating the management LTK
record so invalid keys never reach the stored key state.
Fixes: 346af67b8d ("Bluetooth: Add MGMT handlers for dealing with SMP LTK's")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When hci_cmd_sync_queue_once() returns with error, the destroy callback
will not be called.
Fix leaking references / memory on these failures.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_queue_once() needs to indicate whether a queue item was
added, so caller can know if callbacks are called, so it can avoid
leaking resources.
Change the function to return -EEXIST if queue item already exists.
Modify all callsites to handle that.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_store_wake_reason() is called from hci_event_packet() immediately
after stripping the HCI event header but before hci_event_func()
enforces the per-event minimum payload length from hci_ev_table.
This means a short HCI event frame can reach bacpy() before any bounds
check runs.
Rather than duplicating skb parsing and per-event length checks inside
hci_store_wake_reason(), move wake-address storage into the individual
event handlers after their existing event-length validation has
succeeded. Convert hci_store_wake_reason() into a small helper that only
stores an already-validated bdaddr while the caller holds hci_dev_lock().
Use the same helper after hci_event_func() with a NULL address to
preserve the existing unexpected-wake fallback semantics when no
validated event handler records a wake address.
Annotate the helper with __must_hold(&hdev->lock) and add
lockdep_assert_held(&hdev->lock) so future call paths keep the lock
contract explicit.
Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(),
hci_sync_conn_complete_evt(), le_conn_complete_evt(),
hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(),
hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and
hci_le_past_received_evt().
Fixes: 2f20216c1d ("Bluetooth: Emit controller suspend and resume events")
Cc: stable@vger.kernel.org
Signed-off-by: Oleh Konko <security@1seal.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sco_sock_connect() checks sk_state and sk_type without holding
the socket lock. Two concurrent connect() syscalls on the same
socket can both pass the check and enter sco_connect(), leading
to use-after-free.
The buggy scenario involves three participants and was confirmed
with additional logging instrumentation:
Thread A (connect): HCI disconnect: Thread B (connect):
sco_sock_connect(sk) sco_sock_connect(sk)
sk_state==BT_OPEN sk_state==BT_OPEN
(pass, no lock) (pass, no lock)
sco_connect(sk): sco_connect(sk):
hci_dev_lock hci_dev_lock
hci_connect_sco <- blocked
-> hcon1
sco_conn_add->conn1
lock_sock(sk)
sco_chan_add:
conn1->sk = sk
sk->conn = conn1
sk_state=BT_CONNECT
release_sock
hci_dev_unlock
hci_dev_lock
sco_conn_del:
lock_sock(sk)
sco_chan_del:
sk->conn=NULL
conn1->sk=NULL
sk_state=
BT_CLOSED
SOCK_ZAPPED
release_sock
hci_dev_unlock
(unblocked)
hci_connect_sco
-> hcon2
sco_conn_add
-> conn2
lock_sock(sk)
sco_chan_add:
sk->conn=conn2
sk_state=
BT_CONNECT
// zombie sk!
release_sock
hci_dev_unlock
Thread B revives a BT_CLOSED + SOCK_ZAPPED socket back to
BT_CONNECT. Subsequent cleanup triggers double sock_put() and
use-after-free. Meanwhile conn1 is leaked as it was orphaned
when sco_conn_del() cleared the association.
Fix this by:
- Moving lock_sock() before the sk_state/sk_type checks in
sco_sock_connect() to serialize concurrent connect attempts
- Fixing the sk_type != SOCK_SEQPACKET check to actually
return the error instead of just assigning it
- Adding a state re-check in sco_connect() after lock_sock()
to catch state changes during the window between the locks
- Adding sco_pi(sk)->conn check in sco_chan_add() to prevent
double-attach of a socket to multiple connections
- Adding hci_conn_drop() on sco_chan_add failure to prevent
HCI connection leaks
Fixes: 9a8ec9e8eb ("Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm")
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_run() may run the work immediately if called from existing
sync work (otherwise it queues a new sync work). In this case it fails
to call the destroy() function.
On immediate run, make it behave same way as if item was queued
successfully: call destroy, and return 0.
The only callsite is hci_abort_conn() via hci_cmd_sync_run_once(), and
this changes its return value. However, its return value is not used
except as the return value for hci_disconnect(), and nothing uses the
return value of hci_disconnect(). Hence there should be no behavior
change anywhere.
Fixes: c898f6d7b0 ("Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard.
Fixes: 96298f6401 ("Bluetooth: L2CAP: handle l2cap config request during open state")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer
and id_addr_timer while holding conn->lock. However, the work functions
l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire
conn->lock, creating a potential AB-BA deadlock if the work is already
executing when l2cap_conn_del() takes the lock.
Move the work cancellations before acquiring conn->lock and use
disable_delayed_work_sync() to additionally prevent the works from
being rearmed after cancellation, consistent with the pattern used in
hci_conn_del().
Fixes: ab4eedb790 ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the L2CAP channel mode is L2CAP_MODE_ERTM/L2CAP_MODE_STREAMING,
l2cap_publish_rx_avail will be called and le flow credits will be sent in
l2cap_chan_rx_avail, even though the link type is ACL.
The logs in question as follows:
> ACL Data RX: Handle 129 flags 0x02 dlen 12
L2CAP: Unknown (0x16) ident 4 len 4
40 00 ed 05
< ACL Data TX: Handle 129 flags 0x00 dlen 10
L2CAP: Command Reject (0x01) ident 4 len 2
Reason: Command not understood (0x0000)
Bluetooth: Unknown BR/EDR signaling command 0x16
Bluetooth: Wrong link type (-22)
Fixes: ce60b9231b ("Bluetooth: compute LE flow credits based on recvbuf space")
Signed-off-by: Zhang Chen <zhangchen01@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempt to fix regressions caused by reusing ident which apparently
is not handled well on certain stacks causing the stack to not respond to
requests, so instead of simple returning the first unallocated id this
stores the last used tx_ident and then attempt to use the next until all
available ids are exausted and then cycle starting over to 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177
Fixes: 6c3ea155e5 ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering).
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory.
Link: https://lore.kernel.org/linux-bluetooth/20260315132013.75ab40c5@kernel.org/T/#m1418f9c82eeff8510c1beaa21cf53af20db96c06
Fixes: 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
sco_recv_frame() reads conn->sk under sco_conn_lock() but immediately
releases the lock without holding a reference to the socket. A concurrent
close() can free the socket between the lock release and the subsequent
sk->sk_state access, resulting in a use-after-free.
Other functions in the same file (sco_sock_timeout(), sco_conn_del())
correctly use sco_sock_hold() to safely hold a reference under the lock.
Fix by using sco_sock_hold() to take a reference before releasing the
lock, and adding sock_put() on all exit paths.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path.
Fixes: aac23bf636 ("Bluetooth: Implement LE L2CAP reassembly")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Syzbot reported a KASAN stack-out-of-bounds read in l2cap_build_cmd()
that is triggered by a malformed Enhanced Credit Based Connection Request.
The vulnerability stems from l2cap_ecred_conn_req(). The function allocates
a local stack buffer (`pdu`) designed to hold a maximum of 5 Source Channel
IDs (SCIDs), totaling 18 bytes. When an attacker sends a request with more
than 5 SCIDs, the function calculates `rsp_len` based on this unvalidated
`cmd_len` before checking if the number of SCIDs exceeds
L2CAP_ECRED_MAX_CID.
If the SCID count is too high, the function correctly jumps to the
`response` label to reject the packet, but `rsp_len` retains the
attacker's oversized value. Consequently, l2cap_send_cmd() is instructed
to read past the end of the 18-byte `pdu` buffer, triggering a
KASAN panic.
Fix this by moving the assignment of `rsp_len` to after the `num_scid`
boundary check. If the packet is rejected, `rsp_len` will safely
remain 0, and the error response will only read the 8-byte base header
from the stack.
Fixes: c28d2bff70 ("Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short")
Reported-by: syzbot+b7f3e7d9a596bf6a63e3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b7f3e7d9a596bf6a63e3
Tested-by: syzbot+b7f3e7d9a596bf6a63e3@syzkaller.appspotmail.com
Signed-off-by: Minseo Park <jacob.park.9436@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_information_rsp() checks that cmd_len covers the fixed
l2cap_info_rsp header (type + result, 4 bytes) but then reads
rsp->data without verifying that the payload is present:
- L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads
4 bytes past the header (needs cmd_len >= 8).
- L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header
(needs cmd_len >= 5).
A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an
out-of-bounds read of adjacent skb data.
Guard each data access with the required payload length check. If the
payload is too short, skip the read and let the state machine complete
with safe defaults (feat_mask and remote_fixed_chan remain zero from
kzalloc), so the info timer cleanup and l2cap_conn_start() still run
and the connection is not stalled.
Fixes: 4e8402a3f8 ("[Bluetooth] Retrieve L2CAP features mask on connection setup")
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Johannes Möller <research@johannes-moeller.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field.
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Johannes Möller <research@johannes-moeller.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Within each signaling channel a different Identifier shall be used
for each successive request or indication.'
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d
So this attempts to check if there are any channels pending with the
same identifier and rejects if any are found.
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
After commit ab4eedb790 ("Bluetooth: L2CAP: Fix corrupted list in
hci_chan_del"), l2cap_conn_del() uses conn->lock to protect access to
conn->users. However, l2cap_register_user() and l2cap_unregister_user()
don't use conn->lock, creating a race condition where these functions can
access conn->users and conn->hchan concurrently with l2cap_conn_del().
This can lead to use-after-free and list corruption bugs, as reported
by syzbot.
Fix this by changing l2cap_register_user() and l2cap_unregister_user()
to use conn->lock instead of hci_dev_lock(), ensuring consistent locking
for the l2cap_conn structure.
Reported-by: syzbot+14b6d57fb728e27ce23c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=14b6d57fb728e27ce23c
Fixes: ab4eedb790 ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del")
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs") introduced
mgmt_pending_valid(), which not only validates the pending command but
also unlinks it from the pending list if it is valid. This change in
semantics requires updates to several completion handlers to avoid list
corruption and memory safety issues.
This patch addresses two left-over issues from the aforementioned rework:
1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()
is replaced with mgmt_pending_free() in the success path. Since
mgmt_pending_valid() already unlinks the command at the beginning of
the function, calling mgmt_pending_remove() leads to a double list_del()
and subsequent list corruption/kernel panic.
2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error
path is removed. Since the current command is already unlinked by
mgmt_pending_valid(), this foreach loop would incorrectly target other
pending mesh commands, potentially freeing them while they are still being
processed concurrently (leading to UAFs). The redundant mgmt_cmd_status()
is also simplified to use cmd->opcode directly.
Fixes: 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Wang Tao <wangtao554@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
While introducing hci_le_create_conn_sync the functionality
of hci_connect_le was ported to hci_le_create_conn_sync including
the disable of the scan before starting the connection.
When this code was run non synchronously the immediate call that was
setting the flag HCI_LE_SCAN_INTERRUPTED had an impact. Since the
completion handler for the LE_SCAN_DISABLE was not immediately called.
In the completion handler of the LE_SCAN_DISABLE event, this flag is
checked to set the state of the hdev to DISCOVERY_STOPPED.
With the synchronised approach the later setting of the
HCI_LE_SCAN_INTERRUPTED flag has not the same effect. The completion
handler would immediately fire in the LE_SCAN_DISABLE call, check for
the flag, which is then not yet set and do nothing.
To fix this issue and make the function call work as before, we move the
setting of the flag HCI_LE_SCAN_INTERRUPTED before disabling the scan.
Fixes: 8e8b92ee60 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso-tester defer tests seem to fail with hci_conn_hash_lookup_cig
being unable to resolve a cig in set_cig_params_sync due a race
where it is run immediatelly before hci_bind_cis is able to set
the QoS settings into the hci_conn object.
So this moves the assigning of the QoS settings to be done directly
by hci_le_set_cig_params to prevent that from happening again.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The last test step ("Test with Invalid public key X and Y, all set to
0") expects to get an "DHKEY check failed" instead of "unspecified".
Fixes: 6d19628f53 ("Bluetooth: SMP: Fail if remote and local public keys are identical")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Core 6.0, Vol 3, Part A, 3.4.3:
"... If the sum of the payload sizes for the K-frames exceeds the
specified SDU length, the receiver shall disconnect the channel."
This fixes L2CAP/LE/CFC/BV-27-C (running together with 'l2test -r -P
0x0027 -V le_public').
Fixes: aac23bf636 ("Bluetooth: Implement LE L2CAP reassembly")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Core 6.0, Vol 3, Part A, 3.4.3:
"If the SDU length field value exceeds the receiver's MTU, the receiver
shall disconnect the channel..."
This fixes L2CAP/LE/CFC/BV-26-C (running together with 'l2test -r -P
0x0027 -V le_public -I 100').
Fixes: aac23bf636 ("Bluetooth: Implement LE L2CAP reassembly")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
inode->i_ino is being converted to a u64. sock.sk_ino (which caches the
inode number) must also be widened to avoid truncation on 32-bit
architectures where unsigned long is only 32 bits.
Change sk_ino from unsigned long to u64, and update the return type
of sock_i_ino() to match. Fix all format strings that print the
result of sock_i_ino() (%lu -> %llu), and widen the intermediate
variables and function parameters in the diag modules that were
using int to hold the inode number.
Note that the UAPI socket diag structures (inet_diag_msg.idiag_inode,
unix_diag_msg.udiag_ino, etc.) are all __u32 and cannot be changed
without breaking the ABI. The assignments to those fields will
silently truncate, which is the existing behavior.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260304-iino-u64-v3-3-2257ad83d372@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE.
Link: https://lore.kernel.org/linux-bluetooth/5782243.rdbgypaU67@n9w6sw14/
Fixes: 27e2d4c8d2 ("Bluetooth: Add basic LE L2CAP connect request receiving support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
Upon receiving L2CAP_ECRED_CONN_REQ the given MTU shall be checked
against the suggested MTU of the listening socket as that is required
by the likes of PTS L2CAP/ECFC/BV-27-C test which expects
L2CAP_CR_LE_UNACCEPT_PARAMS if the MTU is lowers than socket omtu.
In order to be able to set chan->omtu the code now allows setting
setsockopt(BT_SNDMTU), but it is only allowed when connection has not
been stablished since there is no procedure to reconfigure the output
MTU.
Link: https://github.com/bluez/bluez/issues/1895
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the condition for sending the LE Set Host Feature command.
The command is sent to indicate host support for Connected Isochronous
Streams in this case. It has been observed that the system could not
initialize BIS-only capable controllers because the controllers do not
support the command.
As per Core v6.2 | Vol 4, Part E, Table 3.1 the command shall be
supported if CIS Central or CIS Peripheral is supported; otherwise,
the command is optional.
Fixes: 709788b154 ("Bluetooth: hci_core: Fix using {cis,bis}_capable for current settings")
Cc: stable@vger.kernel.org
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Similar to 03dba9cea7 ("Bluetooth: L2CAP: Fix not responding with
L2CAP_CR_LE_ENCRYPTION") the result code L2CAP_CR_LE_ENCRYPTION shall
be used when BT_SECURITY_MEDIUM is set since that means security mode 2
which mean it doesn't require authentication which results in
qualification test L2CAP/ECFC/BV-32-C failing.
Link: https://github.com/bluez/bluez/issues/1871
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue.
Fixes: 134f4b39df ("Bluetooth: add support for skb TX SND/COMPLETION timestamping")
Reported-by: syzbot+7ff4013eabad1407b70a@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=7ff4013eabad1407b70a
Cc: stable@vger.kernel.org
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Test L2CAP/ECFC/BV-26-C expect the response to L2CAP_ECRED_CONN_REQ with
and MTU value < L2CAP_ECRED_MIN_MTU (64) to be L2CAP_CR_LE_INVALID_PARAMS
rather than L2CAP_CR_LE_UNACCEPT_PARAMS.
Also fix not including the correct number of CIDs in the response since
the spec requires all CIDs being rejected to be included in the
response.
Link: https://github.com/bluez/bluez/issues/1868
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes responding with an invalid result caused by checking the
wrong size of CID which should have been (cmd_len - sizeof(*req)) and
on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which
is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C:
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 64
MPS: 64
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reserved (0x000c)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002)
when more than one channel gets its MPS reduced:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8
MTU: 264
MPS: 99
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 65
MPS: 64
! Source CID: 85
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 672
! MPS: 63
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Result: Reconfiguration failed - other unacceptable parameters (0x0004)
Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8
MTU: 84
! MPS: 71
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Link: https://github.com/bluez/bluez/issues/1865
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Core & protocols
----------------
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls for
small helper and stack canary overhead in the fast-path. This
generates better and faster code with very small or no text size
increases, as in many cases the call generated more code than the
actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage by
up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the RX
path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without the
HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified, aligning
IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the rate
shaper of sch_cake across multiple CPUs, while still enforcing a
single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations that
are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information, saving
cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most protocols,
avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies between
the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes back
online.
Driver API
----------
- Support for switching the working mode (automatic vs manual) of a DPLL
device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties, to
generalize polarity inversion requirements for differential signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers
--------------
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram and
NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the used
H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO, leading to
12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN metadata
access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support
multi-wiphy devices and and pave the way for future device support
in the same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmmMum4SHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkDnMP/3bpHAGj+gylTid3Xsj0TjJ8AkPsQs+W
uvSMiCB1TvGCTD9kK36Vr+qPoIgJY10UxYMMjt5Gs0A9TvGDDfYnUOVoUIkfkWCH
grqSdp6dVkyaJVfyLEcuOVQQG2HwEnhC4c3ZOhOxaKNAnsLCP142lYsMR9ktGRuA
4vDGtz1+y7t8qBk/lyfXDM71KRrtq0HWJZIhmhz8QXTBsgPDfSejbTPNxXQOJoeO
sKeArsHr/Cmvf89ZtLZ63vbfr4BKDm4PeXqPYR3PrQs2Yu6I1EK4lehygTY2yE2O
I3MEPlvpa/tiVLxqXNNwEFbYIkMPY6FXS9x05hTxNZM65A6aB3vvdkqPVnVmAlXE
f+4PYg9paI13lbzZOeQbGfZ5HgPpzQvnginaaX6s9Fp12K3Ll1FkwWdUznFWhzVn
5LSrGyecR00CdKJByTIw9JGg/1ptz5a57pa8OQmcKRx3WhQ1XeV5TIJQF4QcPgHw
ApyjmeGDTQMQMzha1fsaVr+i6BK2zgZvKK9uGDTX90xn2JUw/M75tyOlsTtGlnuM
sZgj0KVGQlG2wLwBB/+D4S9Oi9YlPG00rkCs0E4jk5C/G4NBmMgpEPQg6azkb57h
Uiy0paohxfwcZ3qbGA9In091ClGqIwOiCBaq+uXRq1ro88Neo6PWkjz5ItNrsD8t
Ttgd5AVAQyPT
=O31Y
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaYlV8xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK1ffAQCbM+cnqF4ThspBCgLZGSScx02KsA4U
dQblKoOFyIEbnwEA1ElJNhNQs2m7AT+R0hOh6yI+5+ttUfqLMT9tuNs2mwM=
=iZ06
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (53 commits)
lib/crypto: mldsa: Clarify the documentation for mldsa_verify() slightly
lib/crypto: aes: Drop 'volatile' from aes_sbox and aes_inv_sbox
lib/crypto: aes: Remove old AES en/decryption functions
lib/crypto: aesgcm: Use new AES library API
lib/crypto: aescfb: Use new AES library API
crypto: omap - Use new AES library API
crypto: inside-secure - Use new AES library API
crypto: drbg - Use new AES library API
crypto: crypto4xx - Use new AES library API
crypto: chelsio - Use new AES library API
crypto: ccp - Use new AES library API
crypto: x86/aes-gcm - Use new AES library API
crypto: arm64/ghash - Use new AES library API
crypto: arm/ghash - Use new AES library API
staging: rtl8723bs: core: Use new AES library API
net: phy: mscc: macsec: Use new AES library API
chelsio: Use new AES library API
Bluetooth: SMP: Use new AES library API
crypto: x86/aes - Remove the superseded AES-NI crypto_cipher
lib/crypto: x86/aes: Add AES-NI optimization
...
This attempts to proper track outstanding request by using struct ida
and allocating from it in l2cap_get_ident using ida_alloc_range which
would reuse ids as they are free, then upon completion release
the id using ida_free.
This fixes the qualification test case L2CAP/COS/CED/BI-29-C which
attempts to check if the host stack is able to work after 256 attempts
to connect which requires Ident field to use the full range of possible
values in order to pass the test.
Link: https://github.com/bluez/bluez/issues/1829
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures
are not freed after being removed from the pending list.
Commit 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs") replaced
mgmt_pending_foreach() calls with individual command handling but missed
adding mgmt_pending_free() calls in both error and success paths of
set_ssp_complete(). Other completion functions like set_le_complete()
were fixed correctly in the same commit.
This causes a memory leak of the mgmt_pending_cmd structure and its
associated parameter data for each SSP command that completes.
Add the missing mgmt_pending_free(cmd) calls in both code paths to fix
the memory leak. Also fix the same issue in set_advertising_complete().
Fixes: 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Export hci_discovery_active() so it can be used by bluetooth
drivers built as modules.
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This renames the PHY fields in bt_iso_io_qos to PHYs (plural) since it
represents a bitfield where multiple PHYs can be set and make the same
change also to HCI_OP_LE_SET_CIG_PARAMS since both c_phy and p_phy
fields are bitfields.
This also fixes the assumption that hci_evt_le_cis_established PHYs
fields are compatible with bt_iso_io_qos, they are not, the fields in
hci_evt_le_cis_established represent just a single PHY value so they
need to be converted to bitfield when set in bt_iso_io_qos.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables client to use setsockopt(BT_PHY) to set the connection
packet type/PHY:
Example setting BT_PHY_BR_1M_1SLOT:
< HCI Command: Change Conne.. (0x01|0x000f) plen 4
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
3-DH5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) ncmd 1
Status: Success (0x00)
> HCI Event: Connection Packet Typ.. (0x1d) plen 5
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
Example setting BT_PHY_LE_1M_TX and BT_PHY_LE_1M_RX:
< HCI Command: LE Set PHY (0x08|0x0032) plen 7
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
All PHYs preference: 0x00
TX PHYs preference: 0x01
LE 1M
RX PHYs preference: 0x01
LE 1M
PHY options preference: Reserved (0x0000)
> HCI Event: Command Status (0x0f) plen 4
LE Set PHY (0x08|0x0032) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 6
LE PHY Update Complete (0x0c)
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
TX PHY: LE 1M (0x01)
RX PHY: LE 1M (0x01)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
1. Implement LE Event Mask to include events required for
LE Channel Sounding
2. Enable Channel Sounding feature bit in the
LE Host Supported Features command
3. Define HCI command and event structures necessary for
LE Channel Sounding functionality
Signed-off-by: Naga Bhavani Akella <naga.akella@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
While the configurable system parameters allow controlling the SNIFF
mode parameters, they do not include the idle_timeout parameter
responsible for enabling SNIFF mode.
Add the idle_timeout parameter to allow controlling the idle timeout
of BR/EDR connections.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The connection link policy is only set when establishing an outgoing
ACL connection causing connection idle modes not to be available on
incoming connections. Move the setting of the link policy to the
creation of the connection so all ACL connection will use the link
policy set on the HCI device.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn_enter_active_mode() uses queue_delayed_work() with the
intention that the work will run after the given timeout. However,
queue_delayed_work() does nothing if the work is already queued, so
depending on the link policy we may end up putting the connection
into idle mode every hdev->idle_timeout ms.
Use mod_delayed_work() instead so the work is queued if not already
queued, and the timeout is updated otherwise.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
conn->le_{tx,rx}_phy is not actually a bitfield as it set by
HCI_EV_LE_PHY_UPDATE_COMPLETE it is actually correspond to the current
PHY in use not what is supported by the controller, so this introduces
different fields (conn->le_{tx,rx}_def_phys) to track what PHYs are
supported by the connection.
Fixes: eab2404ba7 ("Bluetooth: Add BT_PHY socket option")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures
are not freed after being removed from the pending list.
Commit 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs") replaced
mgmt_pending_foreach() calls with individual command handling but missed
adding mgmt_pending_free() calls in both error and success paths of
set_ssp_complete(). Other completion functions like set_le_complete()
were fixed correctly in the same commit.
This causes a memory leak of the mgmt_pending_cmd structure and its
associated parameter data for each SSP command that completes.
Add the missing mgmt_pending_free(cmd) calls in both code paths to fix
the memory leak. Also fix the same issue in set_advertising_complete().
Fixes: 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-20-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Enable the PA Sync Lost event mask to ensure PA sync loss is properly
reported and handled.
Fixes: 485e0626e5 ("Bluetooth: hci_event: Fix not handling PA Sync Lost event")
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
MGMT_SETTING_ISO_BROADCASTER and MGMT_SETTING_ISO_RECEIVER flags are
missing from supported_settings although they are in current_settings.
Report them also in supported_settings to be consistent.
Fixes: ae75336131 ("Bluetooth: Check for ISO support in controller")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for emulating LL Extended Feature Set introduced in 6.0
that adds the following:
Commands:
- HCI_LE_Read_All_Local_Supported_Features(0x2087)(Feature:47,1)
- HCI_LE_Read_All_Remote_Features(0x2088)(Feature:47,2)
Events:
- HCI_LE_Read_All_Remote_Features_Complete(0x2b)(Mask bit:42)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When both BIS and CIS links exist, their sockets are in
the BT_LISTEN state.
dump sock:
sk 000000001977ef51 state 6
src 10:a5:62:31:05:cf dst 00:00:00:00:00:00
sk 0000000031d28700 state 7
src 10:a5:62:31:05:cf dst00:00:00:00:00:00
sk 00000000613af00e state 4 # listen sock of bis
src 10:a5:62:31:05:cf dst 54:00:00:d4:99:30
sk 000000001710468c state 9
src 10:a5:62:31:05:cf dst 54:00:00:d4:99:30
sk 000000005d97dfde state 4 #listen sock of cis
src 10:a5:62:31:05:cf dst 00:00:00:00:00:00
To locate the CIS socket correctly, check both the BT_LISTEN
state and whether dst addr is BDADDR_ANY.
Link: https://github.com/bluez/bluez/issues/1224
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The source address for a BIS sender/Broadcast Source shall be updated
with the advertisement address since in case privacy is enabled it may
use an RPA rather than an identity address.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In certain cases setting devices flags like HCI_CONN_FLAG_PAST it
shouldn't require to do Add Device first since it may not need to add
an auto-connect policy, so this instead just automatically creates
a hci_conn_params if one cannot be found using HCI_AUTO_CONN_DISABLED.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Broadcasters maybe using RPAs which can change over time and not
matching the address used as destination in the socket, so this
attempts to resolve the addresses then match with the socket
address, in case that uses an indentity address, or then match the
IRKs if both broadcaster and socket are using RPAs.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure hci_conn is initialized with the identity address if
a matching IRK exists which avoids the trouble of having to do it at
multiple places which seems to be missing (e.g. CIS, BIS and PA).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it possible to bind to a different destination address
after being connected (BT_CONNECTED, BT_CONNECT2) which then triggers
PAST Sender proceedure to transfer the PA Sync to the destination
address.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces a new device flag so userspace can indicate if it
wants to enable PAST Receiver for a specific device.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds PAST related commands (HCI_OP_LE_PAST,
HCI_OP_LE_PAST_SET_INFO and HCI_OP_LE_PAST_PARAMS) and events
(HCI_EV_LE_PAST_RECEIVED) along with handling of PAST sender and
receiver features bits including new MGMG settings (
HCI_EV_LE_PAST_RECEIVED and MGMT_SETTING_PAST_RECEIVER) which
userspace can use to determine if PAST is supported by the
controller.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The change eed467b517 ("Bluetooth: fix passkey uninitialized when used")
introduced a goto that bypasses the creation of temporary mackey and ltk
which are later used by the likes of DHKey Check step.
Later ffee202a78 ("Bluetooth: Always request for user confirmation for
Just Works (LE SC)") which means confirm_hint is always set in case
JUST_WORKS so the branch checking for an existing LTK becomes pointless
as confirm_hint will always be set, so this just merge both cases of
malicious or legitimate devices to be confirmed before continuing with the
pairing procedure.
Link: https://github.com/bluez/bluez/issues/1622
Fixes: eed467b517 ("Bluetooth: fix passkey uninitialized when used")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The hdev lock/lookup/unlock/use pattern in the packet RX path doesn't
ensure hci_conn* is not concurrently modified/deleted. This locking
appears to be leftover from before conn_hash started using RCU
commit bf4c632524 ("Bluetooth: convert conn hash to RCU")
and not clear if it had purpose since then.
Currently, there are code paths that delete hci_conn* from elsewhere
than the ordered hdev->workqueue where the RX work runs in. E.g.
commit 5af1f84ed1 ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync")
introduced some of these, and there probably were a few others before
it. It's better to do the locking so that even if these run
concurrently no UAF is possible.
Move the lookup of hci_conn and associated socket-specific conn to
protocol recv handlers, and do them within a single critical section
to cover hci_conn* usage and lookup.
syzkaller has reported a crash that appears to be this issue:
[Task hdev->workqueue] [Task 2]
hci_disconnect_all_sync
l2cap_recv_acldata(hcon)
hci_conn_get(hcon)
hci_abort_conn_sync(hcon)
hci_dev_lock
hci_dev_lock
hci_conn_del(hcon)
v-------------------------------- hci_dev_unlock
hci_conn_put(hcon)
conn = hcon->l2cap_data (UAF)
Fixes: 5af1f84ed1 ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync")
Reported-by: syzbot+d32d77220b92eddd89ad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d32d77220b92eddd89ad
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is a potential race condition between sock bind and socket write
iter. bind may free the same cmd via mgmt_pending before write iter sends
the cmd, just as syzbot reported in UAF[1].
Here we use hci_dev_lock to synchronize the two, thereby avoiding the
UAF mentioned in [1].
[1]
syzbot reported:
BUG: KASAN: slab-use-after-free in mgmt_pending_remove+0x3b/0x210 net/bluetooth/mgmt_util.c:316
Read of size 8 at addr ffff888077164818 by task syz.0.17/5989
Call Trace:
mgmt_pending_remove+0x3b/0x210 net/bluetooth/mgmt_util.c:316
set_link_security+0x5c2/0x710 net/bluetooth/mgmt.c:1918
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0x21c/0x270 net/socket.c:742
sock_write_iter+0x279/0x360 net/socket.c:1195
Allocated by task 5989:
mgmt_pending_add+0x35/0x140 net/bluetooth/mgmt_util.c:296
set_link_security+0x557/0x710 net/bluetooth/mgmt.c:1910
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0x21c/0x270 net/socket.c:742
sock_write_iter+0x279/0x360 net/socket.c:1195
Freed by task 5991:
mgmt_pending_free net/bluetooth/mgmt_util.c:311 [inline]
mgmt_pending_foreach+0x30d/0x380 net/bluetooth/mgmt_util.c:257
mgmt_index_removed+0x112/0x2f0 net/bluetooth/mgmt.c:9477
hci_sock_bind+0xbe9/0x1000 net/bluetooth/hci_sock.c:1314
Fixes: 6fe26f694c ("Bluetooth: MGMT: Protect mgmt_pending list with its own lock")
Reported-by: syzbot+9aa47cd4633a3cf92a80@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9aa47cd4633a3cf92a80
Tested-by: syzbot+9aa47cd4633a3cf92a80@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HCI_OP_NOP means no command was actually sent so there is no point in
triggering cmd_timer which may cause a hdev->reset in the process since
it is assumed that the controller is stuck processing a command.
Fixes: e2d471b780 ("Bluetooth: ISO: Fix not using SID from adv report")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cross-merge networking fixes after downstream PR (net-6.18-rc6).
No conflicts, adjacent changes in:
drivers/net/phy/micrel.c
96a9178a29 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
61b7ade9ba ("net: phy: micrel: Add support for non PTP SKUs for lan8814")
and a trivial one in tools/testing/selftests/drivers/net/Makefile.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This handles PA Sync Lost event which previously was assumed to be
handled with BIG Sync Lost but their lifetime are not the same thus why
there are 2 different events to inform when each sync is lost.
Fixes: b2a5f2e1c1 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Contrary to what was stated on d36349ea73 ("Bluetooth: hci_conn:
Fix running bis_cleanup for hci_conn->type PA_LINK") the PA_LINK does
in fact needs to run bis_cleanup in order to terminate the PA Sync,
since that is bond to the listening socket which is the entity that
controls the lifetime of PA Sync, so if it is closed/released the PA
Sync shall be terminated, terminating the PA Sync shall not result in
the BIG Sync being terminated since once the later is established it
doesn't depend on the former anymore.
If the use user wants to reconnect/rebind a number of BIS(s) it shall
keep the socket open until it no longer needs the PA Sync, which means
it retains full control of the lifetime of both PA and BIG Syncs.
Fixes: d36349ea73 ("Bluetooth: hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK")
Fixes: a7bcffc673 ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_close() needs to be called in l2cap_chan_lock(), otherwise
l2cap_le_sig_cmd() etc. may run concurrently.
Add missing locks around l2cap_chan_close().
Fixes: 6b8d4a6a03 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
disconnect_all_peers() calls sleeping function (l2cap_chan_close) under
spinlock. Holding the lock doesn't actually do any good -- we work on a
local copy of the list, and the lock doesn't protect against peer->chan
having already been freed.
Fix by taking refcounts of peer->chan instead. Clean up the code and
old comments a bit.
Take devices_lock instead of RCU, because the kfree_rcu();
l2cap_chan_put(); construct in chan_close_cb() does not guarantee
peer->chan is necessarily valid in RCU.
Also take l2cap_chan_lock() which is required for l2cap_chan_close().
Log: (bluez 6lowpan-tester Client Connect - Disable)
------
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575
...
<TASK>
...
l2cap_send_disconn_req (net/bluetooth/l2cap_core.c:938 net/bluetooth/l2cap_core.c:1495)
...
? __pfx_l2cap_chan_close (net/bluetooth/l2cap_core.c:809)
do_enable_set (net/bluetooth/6lowpan.c:1048 net/bluetooth/6lowpan.c:1068)
------
Fixes: 9030582963 ("Bluetooth: 6lowpan: Converting rwlocks to use RCU")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_put() is exported, so export also l2cap_chan_hold() for
modules.
l2cap_chan_hold() has use case in net/bluetooth/6lowpan.c
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth 6lowpan.c confuses BDADDR_LE and ADDR_LE_DEV address types,
e.g. debugfs "connect" command takes the former, and "disconnect" and
"connect" to already connected device take the latter. This is due to
using same value both for l2cap_chan_connect and hci_conn_hash_lookup_le
which take different dst_type values.
Fix address type passed to hci_conn_hash_lookup_le().
Retain the debugfs API difference between "connect" and "disconnect"
commands since it's been like this since 2015 and nobody apparently
complained.
Fixes: f5ad4ffceb ("Bluetooth: 6lowpan: Use hci_conn_hash_lookup_le() when possible")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth 6lowpan.c netdev has header_ops, so it must set link-local
header for RX skb, otherwise things crash, eg. with AF_PACKET SOCK_RAW
Add missing skb_reset_mac_header() for uncompressed ipv6 RX path.
For the compressed one, it is done in lowpan_header_decompress().
Log: (BlueZ 6lowpan-tester Client Recv Raw - Success)
------
kernel BUG at net/core/skbuff.c:212!
Call Trace:
<IRQ>
...
packet_rcv (net/packet/af_packet.c:2152)
...
<TASK>
__local_bh_enable_ip (kernel/softirq.c:407)
netif_rx (net/core/dev.c:5648)
chan_recv_cb (net/bluetooth/6lowpan.c:294 net/bluetooth/6lowpan.c:359)
------
Fixes: 18722c2470 ("Bluetooth: Enable 6LoWPAN support for BT LE devices")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mesh_send_done timer is not canceled when hdev is removed, which causes
crash if the timer triggers after hdev is gone.
Cancel the timer when MGMT removes the hdev, like other MGMT timers.
Should fix the BUG: sporadically seen by BlueZ test bot
(in "Mesh - Send cancel - 1" test).
Log:
------
BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0
...
Freed by task 36:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x43/0x70
kfree+0x103/0x500
device_release+0x9a/0x210
kobject_put+0x100/0x1e0
vhci_release+0x18b/0x240
------
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Link: https://lore.kernel.org/linux-bluetooth/67364c09.0c0a0220.113cba.39ff@mx.google.com/
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec5 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c4 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c00 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9 ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update all struct proto_ops connect() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the parse_adv_monitor_pattern() function, the value of
the 'length' variable is currently limited to HCI_MAX_EXT_AD_LENGTH(251).
The size of the 'value' array in the mgmt_adv_pattern structure is 31.
If the value of 'pattern[i].length' is set in the user space
and exceeds 31, the 'patterns[i].value' array can be accessed
out of bound when copied.
Increasing the size of the 'value' array in
the 'mgmt_adv_pattern' structure will break the userspace.
Considering this, and to avoid OOB access revert the limits for 'offset'
and 'length' back to the value of HCI_MAX_AD_LENGTH.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: db08722fc7 ("Bluetooth: hci_core: Fix missing instances using HCI_MAX_AD_LENGTH")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In hci_cmd_complete_evt(), if the command complete event has an unknown
opcode, we assume the first byte of the remaining skb->data contains the
return status. However, parameter data has previously been pulled in
hci_event_func(), which may leave the skb empty. If so, using skb->data[0]
for the return status uses un-init memory.
The fix is to check skb->len before using skb->data.
Reported-by: syzbot+a9a4bedfca6aa9d7fa24@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a9a4bedfca6aa9d7fa24
Tested-by: syzbot+a9a4bedfca6aa9d7fa24@syzkaller.appspotmail.com
Fixes: afcb3369f4 ("Bluetooth: hci_event: Fix vendor (unknown) opcode status handling")
Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The RFCOMM driver confuses the local and remote modem control signals,
which specifically means that the reported DTR and RTS state will
instead reflect the remote end (i.e. DSR and CTS).
This issue dates back to the original driver (and a follow-on update)
merged in 2002, which resulted in a non-standard implementation of
TIOCMSET that allowed controlling also the TS07.10 IC and DV signals by
mapping them to the RI and DCD input flags, while TIOCMGET failed to
return the actual state of DTR and RTS.
Note that the bogus control of input signals in tiocmset() is just
dead code as those flags will have been masked out by the tty layer
since 2003.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Periodic advertising enabled flag cannot be tracked by the enabled
flag since advertising and periodic advertising each can be
enabled/disabled separately from one another causing the states to be
inconsistent when for example an advertising set is disabled its
enabled flag is set to false which is then used for periodic which has
not being disabled.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes bis_cleanup not considering connections in BT_OPEN state
before attempting to remove the BIG causing the following error:
btproxy[20110]: < HCI Command: LE Terminate Broadcast Isochronous Group (0x08|0x006a) plen 2
BIG Handle: 0x01
Reason: Connection Terminated By Local Host (0x16)
> HCI Event: Command Status (0x0f) plen 4
LE Terminate Broadcast Isochronous Group (0x08|0x006a) ncmd 1
Status: Unknown Advertising Identifier (0x42)
Fixes: fa224d0c09 ("Bluetooth: ISO: Reassociate a socket with an active BIS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Socket dst_type cannot be directly assigned to hci_conn->type since
there domain is different which may lead to the wrong address type being
used.
Fixes: 6a5ad251b7 ("Bluetooth: ISO: Fix possible circular locking dependency")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reverts commit c9d84da18d. It
replaces in L2CAP calls to msecs_to_jiffies() to secs_to_jiffies()
and updates the constants accordingly. But the constants are also
used in LCAP Configure Request and L2CAP Configure Response which
expect values in milliseconds.
This may prevent correct usage of L2CAP channel.
To fix it, keep those constants in milliseconds and so revert this
change.
Fixes: c9d84da18d ("Bluetooth: L2CAP: convert timeouts to secs_to_jiffies()")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is a BUG: KASAN: stack-out-of-bounds in set_mesh_sync due to
memcpy from badly declared on-stack flexible array.
Another crash is in set_mesh_complete() due to double list_del via
mgmt_pending_valid + mgmt_pending_remove.
Use DEFINE_FLEX to declare the flexible array right, and don't memcpy
outside bounds.
As mgmt_pending_valid removes the cmd from list, use mgmt_pending_free,
and also report status on error.
Fixes: 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the state tracking of advertisement set/instance 0x00 which
is considered a legacy instance and is not tracked individually by
adv_instances list, previously it was assumed that hci_dev itself would
track it via HCI_LE_ADV but that is a global state not specifc to
instance 0x00, so to fix it a new flag is introduced that only tracks the
state of instance 0x00.
Fixes: 1488af7b8b ("Bluetooth: hci_sync: Fix hci_resume_advertising_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Socket dst_type cannot be directly assigned to hci_conn->type since
there domain is different which may lead to the wrong address type being
used.
Fixes: 6a5ad251b7 ("Bluetooth: ISO: Fix possible circular locking dependency")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_dequeue_once() does lookup and then cancel
the entry under two separate lock sections. Meanwhile,
hci_cmd_sync_work() can also delete the same entry,
leading to double list_del() and "UAF".
Fix this by holding cmd_sync_work_lock across both
lookup and cancel, so that the entry cannot be removed
concurrently.
Fixes: 505ea2b295 ("Bluetooth: hci_sync: Add helper functions to manipulate cmd_sync queue")
Reported-by: Cen Zhang <zzzccc427@163.com>
Signed-off-by: Cen Zhang <zzzccc427@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the __struct_group() helper to fix 31 instances of the following
type of warnings:
30 net/bluetooth/mgmt_config.c:16:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
1 net/bluetooth/mgmt_config.c:22:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When creating an advertisement for BIG the address shall not be
non-resolvable since in case of acting as BASS/Broadcast Assistant the
address must be the same as the connection in order to use the PAST
method and even when PAST/BASS are not in the picture a Periodic
Advertisement can still be synchronized thus the same argument as to
connectable advertisements still stand.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
For ISO_CONT RX, the data from skb is copied to conn->rx_skb, but the
skb is leaked.
Free skb after copying its data.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If iso_conn is freed when RX is incomplete, free any leftover skb piece.
Fixes: dc26097bdb ("Bluetooth: ISO: Use kref to track lifetime of iso_conn")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempt to fix similar issue to sco_conn_free where if the
conn->sk is not set to NULL may lead to UAF on iso_conn_free.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prints the information about the hcon on hci_low_sent to confirm
all connection are being processed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to print the number of packets pending to be transmitted
in the conn->data_q.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The debug UUID was only getting set if MGMT_OP_READ_EXP_FEATURES_INFO
was not called with a specific index which breaks the likes of
bluetoothd since it only invokes MGMT_OP_READ_EXP_FEATURES_INFO when an
adapter is plugged, so instead of depending hdev not to be set just
enable the UUID on any index like it was done with iso_sock_uuid.
Fixes: e625e50cee ("Bluetooth: Introduce debug feature when dynamic debug is disabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to detect if an ISO link has been waiting for an ISO
buffer for longer than the maximum allowed transport latency then
proceed to use hci_link_tx_to which prints an error and disconnects.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This aligns the usage of socket sk_sndtimeo as conn_timeout when
initiating a connection and then use it when scheduling the
resulting HCI command, similar to what has been done in bf98feea5b
("Bluetooth: hci_conn: Always use sk_timeo as conn_timeout").
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ISO packets shall not use LE/ACL buffer pool, that feature seem to be
exclusive to LE-ACL only.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the controller has no buffers left return -ENOBUFF to indicate that
iso_cnt might be out of sync.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_resume_advertising_sync is suppose to resume all instance paused by
hci_pause_advertising_sync, this logic is used for procedures are only
allowed when not advertising, but instance 0x00 was not being
re-enabled.
Fixes: ad383c2c65 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Function set_name_sync() uses hdev->dev_name field to send
HCI_OP_WRITE_LOCAL_NAME command, but copying from data to hdev->dev_name
is called after mgmt cmd was queued, so it is possible that function
set_name_sync() will read old name value.
This change adds name as a parameter for function hci_update_name_sync()
to avoid race condition.
Fixes: 6f6ff38a1e ("Bluetooth: hci_sync: Convert MGMT_OP_SET_LOCAL_NAME")
Signed-off-by: Pavel Shpakovskiy <pashpakovskii@salutedevices.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a BIG sync is lost, the device should be set to "disconnected".
This ensures symmetry with the ISO path setup, where the device is
marked as "connected" once the path is established. Without this
change, the device state remains inconsistent and may lead to a
memory leak.
Fixes: b2a5f2e1c1 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event")
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to detect if HCI_EV_NUM_COMP_PKTS contain an unbalanced
(more than currently considered outstanding) number of packets otherwise
it could cause the hcon->sent to underflow and loop around breaking the
tracking of the outstanding packets pending acknowledgment.
Fixes: f428091858 ("Bluetooth: Simplify num_comp_pkts_evt function")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When suspending, the disconnect command for an active Bluetooth
connection could be issued, but the corresponding
`HCI_EV_DISCONN_COMPLETE` event might not be received before the system
completes the suspend process. This can lead to an inconsistent state.
On resume, the controller may auto-accept reconnections from the same
device (due to suspend event filters), but these new connections are
rejected by the kernel which still has connection objects from before
suspend. Resulting in errors like:
```
kernel: Bluetooth: hci0: ACL packet for unknown connection handle 1
kernel: Bluetooth: hci0: Ignoring HCI_Connection_Complete for existing
connection
```
This is a btmon snippet that shows the issue:
```
< HCI Command: Disconnect (0x01|0x0006) plen 3
Handle: 1 Address: 78:20:A5:4A:DF:28 (Nintendo Co.,Ltd)
Reason: Remote User Terminated Connection (0x13)
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) ncmd 2
Status: Success (0x00)
[...]
// Host suspends with the event filter set for the device
// On resume, the device tries to reconnect with a new handle
> HCI Event: Connect Complete (0x03) plen 11
Status: Success (0x00)
Handle: 2
Address: 78:20:A5:4A:DF:28 (Nintendo Co.,Ltd)
// Kernel ignores this event because there is an existing connection
with
// handle 1
```
By explicitly setting the connection state to BT_CLOSED we can ensure a
consistent state, even if we don't receive the disconnect complete event
in time.
Link: https://github.com/bluez/bluez/issues/1226
Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the host sends an HCI_OP_DISCONNECT command, the controller may
respond with the status HCI_ERROR_UNKNOWN_CONN_ID (0x02). E.g. this can
happen on resume from suspend, if the link was terminated by the remote
device before the event mask was correctly set.
This is a btmon snippet that shows the issue:
```
> ACL Data RX: Handle 3 flags 0x02 dlen 12
L2CAP: Disconnection Request (0x06) ident 5 len 4
Destination CID: 65
Source CID: 72
< ACL Data TX: Handle 3 flags 0x00 dlen 12
L2CAP: Disconnection Response (0x07) ident 5 len 4
Destination CID: 65
Source CID: 72
> ACL Data RX: Handle 3 flags 0x02 dlen 12
L2CAP: Disconnection Request (0x06) ident 6 len 4
Destination CID: 64
Source CID: 71
< ACL Data TX: Handle 3 flags 0x00 dlen 12
L2CAP: Disconnection Response (0x07) ident 6 len 4
Destination CID: 64
Source CID: 71
< HCI Command: Set Event Mask (0x03|0x0001) plen 8
Mask: 0x3dbff807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
[...]
< HCI Command: Disconnect (0x01|0x0006) plen 3
Handle: 3 Address: 78:20:A5:4A:DF:28 (Nintendo Co.,Ltd)
Reason: Remote User Terminated Connection (0x13)
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) ncmd 1
Status: Unknown Connection Identifier (0x02)
```
Currently, the hci_cs_disconnect function treats any non-zero status
as a command failure. This can be misleading because the connection is
indeed being terminated and the controller is confirming that is has no
knowledge of that connection handle. Meaning that the initial request of
disconnecting a device should be treated as done.
With this change we allow the function to proceed, following the success
path, which correctly calls `mgmt_device_disconnected` and ensures a
consistent state.
Link: https://github.com/bluez/bluez/issues/1226
Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to make unacked packet handling more robust by detecting
if there are no connections left then restore all buffers of the
respective pool.
Fixes: 5638d9ea9c ("Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The commit e07a06b4eb ("Bluetooth: Convert SCO configure_datapath to
hci_sync") missed to update the *return* statement under the *case* of
BT_CODEC_TRANSPARENT in hci_enhanced_setup_sync(), which led to returning
success (0) instead of the negative error code (-EINVAL). However, the
result of hci_enhanced_setup_sync() seems to be ignored anyway, since NULL
gets passed to hci_cmd_sync_queue() as the last argument in that case and
the only function interested in that result is specified by that argument.
Fixes: e07a06b4eb ("Bluetooth: Convert SCO configure_datapath to hci_sync")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BN == 0x00 in CIS Established means no isochronous data for the
corresponding direction (Core v6.1 pp. 2394). In this case SDU MTU
should be 0.
However, the specification does not say the Max_PDU_C_To_P or P_To_C are
then zero. Intel AX210 in Framed CIS mode sets nonzero Max_PDU for
direction with zero BN. This causes failure later when we try to LE
Setup ISO Data Path for disabled direction, which is disallowed (Core
v6.1 pp. 2750).
Fix by setting SDU MTU to 0 if BN == 0.
Fixes: 2be22f1941 ("Bluetooth: hci_event: Fix parsing of CIS Established Event")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ll_privacy_capable only indicates that the controller supports the
feature but it doesnt' check that LE is enabled so it end up being
marked as active in the current settings when it shouldn't.
Fixes: ad383c2c65 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
{cis,bis}_capable only indicates the controller supports the feature
since it doesn't check that LE is enabled so it shall not be used for
current setting, instead this introduces {cis,bis}_enabled macros that
can be used to indicate that these features are currently enabled.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Fixes: ae75336131 ("Bluetooth: Check for ISO support in controller")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes Broadcaster/Broadcast Source not sending HCI_OP_LE_TERM_BIG
because HCI_CONN_PER_ADV where not being set.
Fixes: a7bcffc673 ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Connections with type of PA_LINK shall be considered temporary just to
track the lifetime of PA Sync setup, once the BIG Sync is established
and connection are created with BIS_LINK the existing PA_LINK
connection shall not longer use bis_cleanup otherwise it terminates the
PA Sync when that shall be left to BIS_LINK connection to do it.
Fixes: a7bcffc673 ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
getname shall return iso_bc fields for both BIS_LINK and PA_LINK since
the likes of bluetoothd do use the getpeername to retrieve the SID both
when enumerating the broadcasters and when synchronizing.
Fixes: a7bcffc673 ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Passive scanning is used to program the address of the peer to be
synchronized, so once HCI_EV_LE_PA_SYNC_ESTABLISHED is received it
needs to be updated after clearing HCI_PA_SYNC then call
hci_update_passive_scan_sync to return it to its original state.
Fixes: 6d0417e4e1 ("Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
list_empty(&hdev->adv_instances) is always true during startup,
so an advertising instance is added by default.
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x24
hci_setup_ext_adv_instance_sync+0x17c/0x328
hci_powered_update_adv_sync+0xb4/0x12c
hci_powered_update_sync+0x54/0x70
hci_power_on_sync+0xe4/0x278
hci_set_powered_sync+0x28/0x34
set_powered_sync+0x40/0x58
hci_cmd_sync_work+0x94/0x100
process_one_work+0x168/0x444
worker_thread+0x378/0x3f4
kthread+0x108/0x10c
ret_from_fork+0x10/0x20
Link: https://github.com/bluez/bluez/issues/1442
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
Currently, BIS_LINK is used for both BIG sync and PA sync connections,
which makes it impossible to distinguish them when searching for a PA
sync connection.
Adding PA_LINK will make the distinction clearer and simplify future
extensions for PA-related features.
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Event_Type field in an LE Extended Advertising Report uses bits 5
and 6 for data status (e.g. truncation or fragmentation), not the PDU
type itself.
The ext_evt_type_to_legacy() function fails to mask these status bits
before evaluation. This causes valid advertisements with status bits set
(e.g. a truncated non-connectable advertisement, which ends up showing
as PDU type 0x40) to be misclassified as unknown and subsequently
dropped. This is okay for most checks which use bitwise AND on the
relevant event type bits, but it doesn't work for non-connectable types,
which are checked with '== LE_EXT_ADV_NON_CONN_IND' (that is, zero).
In terms of behaviour, first the device sends a truncated report:
> HCI Event: LE Meta Event (0x3e) plen 26
LE Extended Advertising Report (0x0d)
Entry 0
Event type: 0x0040
Data status: Incomplete, data truncated, no more to come
Address type: Random (0x01)
Address: 1D:12:46:FA:F8:6E (Non-Resolvable)
SID: 0x03
RSSI: -98 dBm (0x9e)
Data length: 0x00
Then, a few seconds later, it sends the subsequent complete report:
> HCI Event: LE Meta Event (0x3e) plen 122
LE Extended Advertising Report (0x0d)
Entry 0
Event type: 0x0000
Data status: Complete
Address type: Random (0x01)
Address: 1D:12:46:FA:F8:6E (Non-Resolvable)
SID: 0x03
RSSI: -97 dBm (0x9f)
Data length: 0x60
Service Data: Google (0xfef3)
Data[92]: ...
These devices often send multiple truncated reports per second.
This patch introduces a PDU type mask to ensure only the relevant bits
are evaluated, allowing for the correct translation of all valid
extended advertising packets.
Fixes: b2cc9761f1 ("Bluetooth: Handle extended ADV PDU types")
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently both dev_coredumpv and skb_put_data in hci_devcd_dump use
hdev->dump.head. However, dev_coredumpv can free the buffer. From
dev_coredumpm_timeout documentation, which is used by dev_coredumpv:
> Creates a new device coredump for the given device. If a previous one hasn't
> been read yet, the new coredump is discarded. The data lifetime is determined
> by the device coredump framework and when it is no longer needed the @free
> function will be called to free the data.
If the data has not been read by the userspace yet, dev_coredumpv will
discard new buffer, freeing hdev->dump.head. This leads to
vmalloc-out-of-bounds error when skb_put_data tries to access
hdev->dump.head.
A crash report from syzbot illustrates this:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in skb_put_data
include/linux/skbuff.h:2752 [inline]
BUG: KASAN: vmalloc-out-of-bounds in hci_devcd_dump+0x142/0x240
net/bluetooth/coredump.c:258
Read of size 140 at addr ffffc90004ed5000 by task kworker/u9:2/5844
CPU: 1 UID: 0 PID: 5844 Comm: kworker/u9:2 Not tainted
6.14.0-syzkaller-10892-g4e82c87058f4 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 02/12/2025
Workqueue: hci0 hci_devcd_timeout
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x23/0x60 mm/kasan/shadow.c:105
skb_put_data include/linux/skbuff.h:2752 [inline]
hci_devcd_dump+0x142/0x240 net/bluetooth/coredump.c:258
hci_devcd_timeout+0xb5/0x2e0 net/bluetooth/coredump.c:413
process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400
kthread+0x3c2/0x780 kernel/kthread.c:464
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The buggy address ffffc90004ed5000 belongs to a vmalloc virtual mapping
Memory state around the buggy address:
ffffc90004ed4f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90004ed4f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>ffffc90004ed5000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc90004ed5080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90004ed5100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
To avoid this issue, reorder dev_coredumpv to be called after
skb_put_data that does not free the data.
Reported-by: syzbot+ac3c79181f6aecc5120c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ac3c79181f6aecc5120c
Fixes: b257e02ecc ("HCI: coredump: Log devcd dumps into the monitor")
Tested-by: syzbot+ac3c79181f6aecc5120c@syzkaller.appspotmail.com
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
User-space applications (e.g. PipeWire) depend on
ISO-formatted timestamps for precise audio sync.
The ISO ts is based on the controller’s clock domain,
so hardware timestamping (hwtimestamp) must be used.
Ref: Documentation/networking/timestamping.rst,
section 3.1 Hardware Timestamping.
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
User applications need a way to track which ISO interval a given SDU
belongs to, to properly detect packet loss. All controllers do not set
timestamps, and it's not guaranteed user application receives all packet
reports (small socket buffer, or controller doesn't send all reports
like Intel AX210 is doing).
Add socket option BT_PKT_SEQNUM that enables reporting of received
packet ISO sequence number in BT_SCM_PKT_SEQNUM CMSG.
Use BT_PKT_SEQNUM == 22 for the socket option, as 21 was used earlier
for a removed experimental feature that never got into mainline.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Correct the misspelling of “estabilished” in the code.
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the BIS source stops, the controller sends an LE BIG Sync Lost
event (subevent 0x1E). Currently, this event is not handled, causing
the BIS stream to remain active in BlueZ and preventing recovery.
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HCI_EV_EXTENDED_INQUIRY_RESULT's comment wrongly uses 0x2d as its event
code.
Use right 0x2f instead.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Eliminate an unnecessary goto label by using break instead of goto to
exit the loop in hci_find_irk_by_addr().
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use bt_dev_err() instead of bt_dev_dbg() to log error message in
hci_update_event_filter_sync().
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reset cookie value to 0 instead of 0xffffffff in hci_sock_free_cookie()
since:
0 : means cookie has not been assigned yet
0xffffffff: means cookie assignment failure
Also fix generating cookie failure with usage shown below:
hci_sock_gen_cookie(sk) // generate cookie
hci_sock_free_cookie(sk) // free cookie
hci_sock_gen_cookie(sk) // Can't generate cookie any more
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmh9azkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG7GIH/0lpQtHRl6N+q2Qs
v75iG2ZouWyw2JlhUOHAToKU58MZqqTXLZzc8ZdY6fAd7DpXWKRGSDsyWVyLbUkt
UKGzXEIJsHXYvw2QIPbhkY9gQBWpdZTh4tHztFyKb0QLn81qkibVP6ChOwSzOGa/
xUyQ5v6yH+JvQlnQaCgy6hi7cMrLNSNZmuIjy0yc5Y153YPEtX5OUPO2PstpUx5r
AuiOhU4ewW9QCe07X/Pk7tdn0T2Jg8Kwk1FViaM0RBUf/0GXGfsovIxpUP/eCyMc
MA+9SXXLlDa/4Z8w3EsQYx6m2MnNmm0HPeevCmWqq3+Ocooik4si1BpzHfUaE6n/
/0D8zBg=
=NzEi
-----END PGP SIGNATURE-----
Merge tag 'v6.16-rc7' into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Configuration request only configure the incoming direction of the peer
initiating the request, so using the MTU is the other direction shall
not be used, that said the spec allows the peer responding to adjust:
Bluetooth Core 6.1, Vol 3, Part A, Section 4.5
'Each configuration parameter value (if any is present) in an
L2CAP_CONFIGURATION_RSP packet reflects an ‘adjustment’ to a
configuration parameter value that has been sent (or, in case of
default values, implied) in the corresponding
L2CAP_CONFIGURATION_REQ packet.'
That said adjusting the MTU in the response shall be limited to ERTM
channels only as for older modes the remote stack may not be able to
detect the adjustment causing it to silently drop packets.
Link: https://github.com/bluez/bluez/issues/1422
Link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/149
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4793
Fixes: 042bb9603c ("Bluetooth: L2CAP: Fix L2CAP MTU negotiation")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 'quirks' member already ran out of bits on some platforms some time
ago. Replace the integer member by a bitmap in order to have enough bits
in future. Replace raw bit operations by accessor macros.
Fixes: ff26b2dd65 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING")
Fixes: 127881334e ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE")
Suggested-by: Pauli Virtanen <pav@iki.fi>
Tested-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This replaces the usage of HCI_ERROR_REMOTE_USER_TERM, which as the name
suggest is to indicate a regular disconnection initiated by an user,
with HCI_ERROR_AUTH_FAILURE to indicate the session has timeout thus any
pairing shall be considered as failed.
Fixes: 1e91c29eb6 ("Bluetooth: Use hci_disconnect for immediate disconnection from SMP")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If a command is received while a bonding is ongoing consider it a
pairing failure so the session is cleanup properly and the device is
disconnected immediately instead of continuing with other commands that
may result in the session to get stuck without ever completing such as
the case bellow:
> ACL Data RX: Handle 2048 flags 0x02 dlen 21
SMP: Identity Information (0x08) len 16
Identity resolving key[16]: d7e08edef97d3e62cd2331f82d8073b0
> ACL Data RX: Handle 2048 flags 0x02 dlen 21
SMP: Signing Information (0x0a) len 16
Signature key[16]: 1716c536f94e843a9aea8b13ffde477d
Bluetooth: hci0: unexpected SMP command 0x0a from XX:XX:XX:XX:XX:XX
> ACL Data RX: Handle 2048 flags 0x02 dlen 12
SMP: Identity Address Information (0x09) len 7
Address: XX:XX:XX:XX:XX:XX (Intel Corporate)
While accourding to core spec 6.1 the expected order is always BD_ADDR
first first then CSRK:
When using LE legacy pairing, the keys shall be distributed in the
following order:
LTK by the Peripheral
EDIV and Rand by the Peripheral
IRK by the Peripheral
BD_ADDR by the Peripheral
CSRK by the Peripheral
LTK by the Central
EDIV and Rand by the Central
IRK by the Central
BD_ADDR by the Central
CSRK by the Central
When using LE Secure Connections, the keys shall be distributed in the
following order:
IRK by the Peripheral
BD_ADDR by the Peripheral
CSRK by the Peripheral
IRK by the Central
BD_ADDR by the Central
CSRK by the Central
According to the Core 6.1 for commands used for key distribution "Key
Rejected" can be used:
'3.6.1. Key distribution and generation
A device may reject a distributed key by sending the Pairing Failed command
with the reason set to "Key Rejected".
Fixes: b28b494366 ("Bluetooth: Add strict checks for allowed SMP PDUs")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently, the connectable flag used by the setup of an extended
advertising instance drives whether we require privacy when trying to pass
a random address to the advertising parameters (Own Address).
If privacy is not required, then it automatically falls back to using the
controller's public address. This can cause problems when using controllers
that do not have a public address set, but instead use a static random
address.
e.g. Assume a BLE controller that does not have a public address set.
The controller upon powering is set with a random static address by default
by the kernel.
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6
Address: E4:AF:26:D8:3E:3A (Static)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
Setting non-connectable extended advertisement parameters in bluetoothctl
mgmt
add-ext-adv-params -r 0x801 -x 0x802 -P 2M -g 1
correctly sets Own address type as Random
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036)
plen 25
...
Own address type: Random (0x01)
Setting connectable extended advertisement parameters in bluetoothctl mgmt
add-ext-adv-params -r 0x801 -x 0x802 -P 2M -g -c 1
mistakenly sets Own address type to Public (which causes to use Public
Address 00:00:00:00:00:00)
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036)
plen 25
...
Own address type: Public (0x00)
This causes either the controller to emit an Invalid Parameters error or to
mishandle the advertising.
This patch makes sure that we use the already set static random address
when requesting a connectable extended advertising when we don't require
privacy and our public address is not set (00:00:00:00:00:00).
Fixes: 3fe318ee72 ("Bluetooth: move hci_get_random_address() to hci_sync")
Signed-off-by: Alessandro Gasbarroni <alex.gasbarroni@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Upon receiving HCI_EVT_LE_BIG_SYNC_ESTABLISHED with status 0x00
(success) the corresponding BIS hci_conn state shall be set to
BT_CONNECTED otherwise they will be left with BT_OPEN which is invalid
at that point, also create the debugfs and sysfs entries following the
same logic as the likes of Broadcast Source BIS and CIS connections.
Fixes: f777d88278 ("Bluetooth: ISO: Notify user space about failed bis connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BIS/PA connections do have their own cleanup proceedure which are
performed by hci_conn_cleanup/bis_cleanup.
Fixes: 23205562ff ("Bluetooth: separate CIS_LINK and BIS_LINK link types")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
As the code comments on hci_setup_ext_adv_instance_sync suggests the
advertising instance needs to be disabled in order to update its
parameters, but it was wrongly checking that !adv->pending.
Fixes: cba6b75871 ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently, for controllers with extended advertising, the advertising
data is set in the asynchronous response handler for extended
adverstising params. As most advertising settings are performed in a
synchronous context, the (asynchronous) setting of the advertising data
is done too late (after enabling the advertising).
Move setting of adverstising data from asynchronous response handler
into synchronous context to fix ordering of HCI commands.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Fixes: a0fb3726ba ("Bluetooth: Use Set ext adv/scan rsp data if controller supports")
Cc: stable@vger.kernel.org
v2: https://lore.kernel.org/linux-bluetooth/20250626115209.17839-1-ceggers@arri.de/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The unconditional call of hci_disable_advertising_sync() in
mesh_send_done_sync() also disables other LE advertisings (non mesh
related).
I am not sure whether this call is required at all, but checking the
adv_instances list (like done at other places) seems to solve the
problem.
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
According to the message of commit b338d91703 ("Bluetooth: Implement
support for Mesh"), MGMT_OP_SET_MESH_RECEIVER should set the passive scan
parameters. Currently the scan interval and window parameters are
silently ignored, although user space (bluetooth-meshd) expects that
they can be used [1]
[1] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/mesh/mesh-io-mgmt.c#n344
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reverts minor parts of the changes made in commit b338d91703
("Bluetooth: Implement support for Mesh"). It looks like these changes
were only made for development purposes but shouldn't have been part of
the commit.
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Followup of commit 285975dd67 ("net: annotate data-races around
sk->sk_{rcv|snd}timeo").
Remove lock_sock()/release_sock() from sock_set_sndtimeo(),
and add READ_ONCE()/WRITE_ONCE() where it is needed.
Also SO_SNDTIMEO_OLD and SO_SNDTIMEO_NEW can call sock_set_timeout()
without holding the socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250620155536.335520-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Difference between sock_i_uid() and sk_uid() is that
after sock_orphan(), sock_i_uid() returns GLOBAL_ROOT_UID
while sk_uid() returns the last cached sk->sk_uid value.
None of sock_i_uid() callers care about this.
Use sk_uid() which is much faster and inlined.
Note that diag/dump users are calling sock_i_ino() and
can not see the full benefit yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20250620133001.4090592-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit 587ae086f6 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718
CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
skb_queue_purge include/linux/skbuff.h:3368 [inline]
vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69
hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline]
hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592
sock_do_ioctl+0xd9/0x300 net/socket.c:1190
sock_ioctl+0x576/0x790 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf5b98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929
RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009
RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528
</TASK>
Allocated by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635
misc_open+0x2bc/0x330 drivers/char/misc.c:161
chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414
do_dentry_open+0xdf0/0x1970 fs/open.c:964
vfs_open+0x3b/0x340 fs/open.c:1094
do_open fs/namei.c:3887 [inline]
path_openat+0x2ee5/0x3830 fs/namei.c:4046
do_filp_open+0x1fa/0x410 fs/namei.c:4073
do_sys_openat2+0x121/0x1c0 fs/open.c:1437
do_sys_open fs/open.c:1452 [inline]
__do_sys_openat fs/open.c:1468 [inline]
__se_sys_openat fs/open.c:1463 [inline]
__x64_sys_openat+0x138/0x170 fs/open.c:1463
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x18e/0x440 mm/slub.c:4842
vhci_release+0xbc/0xd0 drivers/bluetooth/hci_vhci.c:671
__fput+0x44c/0xa70 fs/file_table.c:465
task_work_run+0x1d1/0x260 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x6ad/0x22e0 kernel/exit.c:955
do_group_exit+0x21c/0x2d0 kernel/exit.c:1104
__do_sys_exit_group kernel/exit.c:1115 [inline]
__se_sys_exit_group kernel/exit.c:1113 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1113
x64_sys_call+0x21ba/0x21c0 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff88807cb8d800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 88 bytes inside of
freed 1024-byte region [ffff88807cb8d800, ffff88807cb8dc00)
Fixes: bf18c7118c ("Bluetooth: vhci: Free driver_data on file release")
Reported-by: syzbot+2faa4825e556199361f9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f62d64848fc4c7c30cd6
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
OBEX download from iPhone is currently slow due to small packet size
used to transfer data which doesn't follow the MTU negotiated during
L2CAP connection, i.e. 672 bytes instead of 32767:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 4103 (0x1007)
Source CID: 72
> ACL Data RX: Handle 11 flags 0x02 dlen 16
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 14608
Source CID: 72
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 20 len 19
Destination CID: 14608
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 72 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 72 len 21
Source CID: 14608
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 20 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 1 ReqSeq 2
< ACL Data TX: Handle 11 flags 0x00 dlen 13
Channel: 14608 len 9 ctrl 0x0204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0304 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 3
The MTUs are negotiated for each direction. In this traces 32767 for
iPhone->localhost and no MTU for localhost->iPhone, which based on
'4.4 L2CAP_CONFIGURATION_REQ' (Core specification v5.4, Vol. 3, Part
A):
The only parameters that should be included in the
L2CAP_CONFIGURATION_REQ packet are those that require different
values than the default or previously agreed values.
...
Any missing configuration parameters are assumed to have their
most recently explicitly or implicitly accepted values.
and '5.1 Maximum transmission unit (MTU)':
If the remote device sends a positive L2CAP_CONFIGURATION_RSP
packet it should include the actual MTU to be used on this channel
for traffic flowing into the local device.
...
The default value is 672 octets.
is set by BlueZ to 672 bytes.
It seems that the iPhone used the lowest negotiated value to transfer
data to the localhost instead of the negotiated one for the incoming
direction.
This could be fixed by using the MTU negotiated for the other
direction, if exists, in the L2CAP_CONFIGURATION_RSP.
This allows to use segmented packets as in the following traces:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 22 len 4
PSM: 4103 (0x1007)
Source CID: 72
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 24 len 19
Destination CID: 2832
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 15 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 15 len 21
Source CID: 2832
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 24 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0x4202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Start (len 21884) TxSeq 1 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0xc204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Continuation TxSeq 2 ReqSeq 2
This has been tested with kernel 5.4 and BlueZ 5.77.
Cc: stable@vger.kernel.org
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This code (tty_get -> vhangup -> tty_put) is repeated on few places.
Introduce a helper similar to tty_port_tty_hangup() (asynchronous) to
handle even vhangup (synchronous).
And use it on those places.
In fact, reuse the tty_port_tty_hangup()'s code and call tty_vhangup()
depending on a new bool parameter.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: David Lin <dtwlin@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250611100319.186924-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent invalid
routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused transient
packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0mtm
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
Currently bc_sid is being ignore when acting as Broadcast Source role,
so this fix it by passing the bc_sid and then use it when programming
the PA:
< HCI Command: LE Set Exte.. (0x08|0x0036) plen 25
Handle: 0x01
Properties: 0x0000
Min advertising interval: 140.000 msec (0x00e0)
Max advertising interval: 140.000 msec (0x00e0)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
TX power: Host has no preference (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 2M (0x02)
SID: 0x01
Scan request notifications: Disabled (0x00)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_SK_PA_SYNC is only valid for Broadcast Sinks which means socket used
for Broadcast Sources wouldn't be able to use the likes of getpeername
to read out the sockaddr_iso_bc fields which may have been update (e.g.
bc_sid).
Fixes: 0a766a0aff ("Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER
without checking if that would fit.
Link: https://github.com/bluez/bluez/issues/1117#issuecomment-2958244066
Fixes: 01ce70b0a2 ("Bluetooth: eir: Move EIR/Adv Data functions to its own file")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When using and existing adv_info instance for broadcast source it
needs to be updated to periodic first before it can be reused, also in
case the existing instance already have data hci_set_adv_instance_data
cannot be used directly since it would overwrite the existing data so
this reappend the original data after the Broadcast ID, if one was
generated.
Example:
bluetoothctl># Add PBP to EA so it can be later referenced as the BIS ID
bluetoothctl> advertise.service 0x1856 0x00 0x00
bluetoothctl> advertise on
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 13
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x09
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
...
bluetoothctl># Attempt to acquire Broadcast Source transport
bluetoothctl>transport.acquire /org/bluez/hci0/pac_bcast0/fd0
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 255
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x0e
Service Data: Broadcast Audio Announcement (0x1852)
Broadcast ID: 11371620 (0xad8464)
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Link: https://github.com/bluez/bluez/issues/1117
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA.
Fixes: 8f9ae5b3ae ("Bluetooth: eir: Add helpers for managing service data")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Releasing + re-acquiring RCU lock inside list_for_each_entry_rcu() loop
body is not correct.
Fix by taking the update-side hdev->lock instead.
Fixes: c7eaf80bfb ("Bluetooth: Fix hci_link_tx_to RCU lock usage")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Depending on the security set the response to L2CAP_LE_CONN_REQ shall be
just L2CAP_CR_LE_ENCRYPTION if only encryption when BT_SECURITY_MEDIUM
is selected since that means security mode 2 which doesn't require
authentication which is something that is covered in the qualification
test L2CAP/LE/CFC/BV-25-C.
Link: https://github.com/bluez/bluez/issues/1270
Fixes: 27e2d4c8d2 ("Bluetooth: Add basic LE L2CAP connect request receiving support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In 'mgmt_hci_cmd_sync()', check whether the size of parameters passed
in 'struct mgmt_cp_hci_cmd_sync' matches the total size of the data
(i.e. 'sizeof(struct mgmt_cp_hci_cmd_sync)' plus trailing bytes).
Otherwise, large invalid 'params_len' will cause 'hci_cmd_sync_alloc()'
to do 'skb_put_data()' from an area beyond the one actually passed to
'mgmt_hci_cmd_sync()'.
Reported-by: syzbot+5fe2d5bfbfbec0b675a0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5fe2d5bfbfbec0b675a0
Fixes: 827af4787e ("Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In 'mgmt_mesh_foreach()', iterate over mesh commands
rather than generic mgmt ones. Compile tested only.
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_check_enc_key_size shall check the security level of the
l2cap_chan rather than the hci_conn since for incoming connection
request that may be different as hci_conn may already been
encrypted using a different security level.
Fixes: 522e9ed157 ("Bluetooth: l2cap: Check encryption key size on incoming connection")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use separate link type id for unicast and broadcast ISO connections.
These connection types are handled with separate HCI commands, socket
API is different, and hci_conn has union fields that are different in
the two cases, so they shall not be mixed up.
Currently in most places it is attempted to distinguish ucast by
bacmp(&c->dst, BDADDR_ANY) but it is wrong as dst is set for bcast sink
hci_conn in iso_conn_ready(). Additionally checking sync_handle might be
OK, but depends on details of bcast conn configuration flow.
To avoid complicating it, use separate link types.
Fixes: f764a6c2c1 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth needs some way for user to get supported so_timestamping flags
for the different socket types.
Use SIOCETHTOOL API for this purpose. As hci_dev is not associated with
struct net_device, the existing implementation can't be reused, so we
add a small one here.
Add support (only) for ETHTOOL_GET_TS_INFO command. The API differs
slightly from netdev in that the result depends also on socket type.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the socket is a broadcast receiver fields from sockaddr_iso_bc shall
be part of the values returned to getpeername since some of these fields
are updated while doing the PA and BIG sync procedures.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Up until now it has been assumed that the application would be able to
enter the advertising SID in sockaddr_iso_bc.bc_sid, but userspace has
no access to SID since the likes of MGMT_EV_DEVICE_FOUND cannot carry
it, so it was left unset (0x00) which means it would be unable to
synchronize if the broadcast source is using a different SID e.g. 0x04:
> HCI Event: LE Meta Event (0x3e) plen 57
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x0000
Props: 0x0000
Data status: Complete
Address type: Random (0x01)
Address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Primary PHY: LE 1M
Secondary PHY: LE 2M
SID: 0x04
TX power: 127 dBm
RSSI: -55 dBm (0xc9)
Periodic advertising interval: 180.00 msec (0x0090)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
Data length: 0x1f
06 16 52 18 5b 0b e1 05 16 56 18 04 00 11 30 4c ..R.[....V....0L
75 69 7a 27 73 20 53 32 33 20 55 6c 74 72 61 uiz's S23 Ultra
Service Data: Broadcast Audio Announcement (0x1852)
Broadcast ID: 14748507 (0xe10b5b)
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0400
Unknown EIR field 0x30[16]: 4c75697a27732053323320556c747261
< HCI Command: LE Periodic Advertising Create Sync (0x08|0x0044) plen 14
Options: 0x0000
Use advertising SID, Advertiser Address Type and address
Reporting initially enabled
SID: 0x00 (<- Invalid)
Adv address type: Random (0x01)
Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Skip: 0x0000
Sync timeout: 20000 msec (0x07d0)
Sync CTE type: 0x0000
So instead this changes now allow application to set HCI_SID_INVALID
which will make hci_le_pa_create_sync to wait for a report, update the
conn->sid using the report SID and only then issue PA create sync
command:
< HCI Command: LE Periodic Advertising Create Sync
Options: 0x0000
Use advertising SID, Advertiser Address Type and address
Reporting initially enabled
SID: 0x04
Adv address type: Random (0x01)
Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Skip: 0x0000
Sync timeout: 20000 msec (0x07d0)
Sync CTE type: 0x0000
> HCI Event: LE Meta Event (0x3e) plen 16
LE Periodic Advertising Sync Established (0x0e)
Status: Success (0x00)
Sync handle: 64
Advertising SID: 0x04
Advertiser address type: Random (0x01)
Advertiser address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Advertiser PHY: LE 2M (0x02)
Periodic advertising interval: 180.00 msec (0x0090)
Advertiser clock accuracy: 0x05
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Although commit 75ddcd5ad4 ("Bluetooth: btusb: Configure altsetting
for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out
SCO data through USB Bluetooth chips, it's observed that with the patch
HFP is flaky on most of the existing USB Bluetooth controllers: Intel
chips sometimes send out no packet for Transparent codec; MTK chips may
generate SCO data with a wrong handle for CVSD codec; RTK could split
the data with a wrong packet size for Transparent codec; ... etc.
To address the issue above one needs to reset the altsetting back to
zero when there is no active SCO connection, which is the same as the
BlueZ behavior, and another benefit is the bus doesn't need to reserve
bandwidth when no SCO connection.
This patch adds the infrastructure that allow the user space program to
talk to Bluetooth drivers directly:
- Define the new packet type HCI_DRV_PKT which is specifically used for
communication between the user space program and the Bluetooth drviers
- hci_send_frame intercepts the packets and invokes drivers' HCI Drv
callbacks (so far only defined for btusb)
- 2 kinds of events to user space: Command Status and Command Complete,
the former simply returns the status while the later may contain
additional response data.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Fixes: b16b327edb ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the regression introduced by 50c1241e6a8a ("Bluetooth: l2cap:
Check encryption key size on incoming connection") introduced a check for
l2cap_check_enc_key_size which checks for hcon->enc_key_size which may
not be initialized if HCI_OP_READ_ENC_KEY_SIZE is still pending.
If the key encryption size is known, due previously reading it using
HCI_OP_READ_ENC_KEY_SIZE, then store it as part of link_key/smp_ltk
structures so the next time the encryption is changed their values are
used as conn->enc_key_size thus avoiding the racing against
HCI_OP_READ_ENC_KEY_SIZE.
Now that the enc_size is stored as part of key the information the code
then attempts to check that there is no downgrade of security if
HCI_OP_READ_ENC_KEY_SIZE returns a value smaller than what has been
previously stored.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220061
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220063
Fixes: 522e9ed157 ("Bluetooth: l2cap: Check encryption key size on incoming connection")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Device flags could be updated in the meantime while MGMT_OP_ADD_DEVICE
is pending on hci_update_passive_scan_sync so instead of setting the
current_flags as cmd->user_data just do a lookup using
hci_conn_params_lookup and use the latest stored flags.
Fixes: a182d9c84f ("Bluetooth: MGMT: Fix Add Device to responding before completing")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Copy timestamp too when allocating new skb for received fragment.
Fixes missing RX timestamps with fragmentation.
Fixes: 4d7ea8ee90 ("Bluetooth: L2CAP: Fix handling fragmented length")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BIG Create Sync requires the command to just generates a status so this
makes use of __hci_cmd_sync_status_sk to wait for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the BIG sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED before proceeding to next connection.
Fixes: 42ecf19471 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Broadcast Receiver requires creating PA sync but the command just
generates a status so this makes use of __hci_cmd_sync_status_sk to wait
for HCI_EV_LE_PA_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the PA sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EV_LE_PA_SYNC_ESTABLISHED before proceeding to next connection.
Fixes: 4a5e0ba686 ("Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is required for passing PTS test cases:
- L2CAP/COS/CED/BI-14-C
Multiple Signaling Command in one PDU, Data Truncated, BR/EDR,
Connection Request
- L2CAP/COS/CED/BI-15-C
Multiple Signaling Command in one PDU, Data Truncated, BR/EDR,
Disconnection Request
The test procedure defined in L2CAP.TS.p39 for both tests is:
1. The Lower Tester sends a C-frame to the IUT with PDU Length set
to 8 and Channel ID set to the correct signaling channel for the
logical link. The Information payload contains one L2CAP_ECHO_REQ
packet with Data Length set to 0 with 0 octets of echo data and
one command packet and Data Length set as specified in Table 4.6
and the correct command data.
2. The IUT sends an L2CAP_ECHO_RSP PDU to the Lower Tester.
3. Perform alternative 3A, 3B, 3C, or 3D depending on the IUT’s
response.
Alternative 3A (IUT terminates the link):
3A.1 The IUT terminates the link.
3A.2 The test ends with a Pass verdict.
Alternative 3B (IUT discards the frame):
3B.1 The IUT does not send a reply to the Lower Tester.
Alternative 3C (IUT rejects PDU):
3C.1 The IUT sends an L2CAP_COMMAND_REJECT_RSP PDU to the
Lower Tester.
Alternative 3D (Any other IUT response):
3D.1 The Upper Tester issues a warning and the test ends.
4. The Lower Tester sends a C-frame to the IUT with PDU Length set
to 4 and Channel ID set to the correct signaling channel for the
logical link. The Information payload contains Data Length set to
0 with an L2CAP_ECHO_REQ packet with 0 octets of echo data.
5. The IUT sends an L2CAP_ECHO_RSP PDU to the Lower Tester.
With expected outcome:
In Steps 2 and 5, the IUT responds with an L2CAP_ECHO_RSP.
In Step 3A.1, the IUT terminates the link.
In Step 3B.1, the IUT does not send a reply to the Lower Tester.
In Step 3C.1, the IUT rejects the PDU.
In Step 3D.1, the IUT sends any valid response.
Currently PTS fails with the following logs:
Failed to receive ECHO RESPONSE.
And HCI logs:
> ACL Data RX: Handle 11 flags 0x02 dlen 20
L2CAP: Information Response (0x0b) ident 2 len 12
Type: Fixed channels supported (0x0003)
Result: Success (0x0000)
Channels: 0x000000000000002e
L2CAP Signaling (BR/EDR)
Connectionless reception
AMP Manager Protocol
L2CAP Signaling (LE)
> ACL Data RX: Handle 11 flags 0x02 dlen 13
frame too long
08 01 00 00 08 02 01 00 aa .........
Cc: stable@vger.kernel.org
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Documentation/networking/timestamping.rst implies TX timestamping OPT_ID
tskey increments for each sendmsg. In practice: TCP socket increments
it for all sendmsg, timestamping on or off, but UDP only when
timestamping is on. The user-visible counter resets when OPT_ID is
turned on, so difference can be seen only if timestamping is enabled for
some packets only (eg. via SO_TIMESTAMPING CMSG).
Fix BT sockets to work in the same way: stream sockets increment tskey
for all sendmsg (seqpacket already increment for timestamped only).
Fixes: 134f4b39df ("Bluetooth: add support for skb TX SND/COMPLETION timestamping")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes sending MGMT_EV_DEVICE_FOUND for invalid address
(00:00:00:00:00:00) which is a regression introduced by
a2ec905d1e ("Bluetooth: fix kernel oops in store_pending_adv_report")
since in the attempt to skip storing data for extended advertisement it
actually made the code to skip the entire if statement supposed to send
MGMT_EV_DEVICE_FOUND without attempting to use the last_addr_adv which
is garanteed to be invalid for extended advertisement since we never
store anything on it.
Link: https://github.com/bluez/bluez/issues/1157
Link: https://github.com/bluez/bluez/issues/1149#issuecomment-2767215658
Fixes: a2ec905d1e ("Bluetooth: fix kernel oops in store_pending_adv_report")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This adds LL Privacy (bit 22) to Read Controller Information so the likes
of bluetoothd(1) can detect when the controller supports it or not.
Fixes: e209e5ccc5 ("Bluetooth: MGMT: Mark LL Privacy as stable")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some controllers seems to generate HCI_EV_LE_DIRECT_ADV_REPORT even when
scan_filter is not set to 0x02 or 0x03, which indicates that local
privacy is enabled, causing them to be ignored thus breaking
auto-connect logic:
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Own address type: Public (0x00)
Filter policy: Ignore not in accept list (0x01)
...
> HCI Event: LE Meta Event (0x3e) plen 18
LE Direct Advertising Report (0x0b)
Num reports: 1
Event type: Connectable directed - ADV_DIRECT_IND (0x01)
Address type: Random (0x01)
Address: XX:XX:XX:XX:XX:XX (Static)
Direct address type: Random (0x01)
Direct address: XX:XX:XX:XX:XX:XX (Non-Resolvable)
RSSI: -54 dBm (0xca)
So this attempts to mitigate the above problem by skipping checking of
direct_addr if local privacy is not enabled.
Link: https://github.com/bluez/bluez/issues/1138
Fixes: e209e5ccc5 ("Bluetooth: MGMT: Mark LL Privacy as stable")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Support TX timestamping in SCO sockets.
Not available for hdevs without SCO_FLOWCTL.
Support MSG_ERRQUEUE in SCO recvmsg.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Support TX timestamping in L2CAP sockets.
Support MSG_ERRQUEUE recvmsg.
For other than SOCK_STREAM L2CAP sockets, if a packet from sendmsg() is
fragmented, only the first ACL fragment is timestamped.
For SOCK_STREAM L2CAP sockets, use the bytestream convention and
timestamp the last fragment and count bytes in tskey.
Timestamps are not generated in the Enhanced Retransmission mode, as
meaning of COMPLETION stamp is unclear if L2CAP layer retransmits.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add BT_SCM_ERROR socket CMSG type.
Support TX timestamping in ISO sockets.
Support MSG_ERRQUEUE in ISO recvmsg.
If a packet from sendmsg() is fragmented, only the first ACL fragment is
timestamped.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Support enabling TX timestamping for some skbs, and track them until
packet completion. Generate software SCM_TSTAMP_COMPLETION when getting
completion report from hardware.
Generate software SCM_TSTAMP_SND before sending to driver. Sending from
driver requires changes in the driver API, and drivers mostly are going
to send the skb immediately.
Make the default situation with no COMPLETION TX timestamping more
efficient by only counting packets in the queue when there is nothing to
track. When there is something to track, we need to make clones, since
the driver may modify sent skbs.
The tx_q queue length is bounded by the hdev flow control, which will
not send new packets before it has got completion reports for old ones.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Return Parameters is not only status, also bdaddr:
BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E
page 1870:
BLUETOOTH CORE SPECIFICATION Version 5.0 | Vol 2, Part E
page 802:
Return parameters:
Status:
Size: 1 octet
BD_ADDR:
Size: 6 octets
Note that it also fixes the warning:
"Bluetooth: hci0: unexpected cc 0x041a length: 7 > 1"
Fixes: c8992cffbe ("Bluetooth: hci_event: Use of a function table to handle Command Complete")
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A SCO connection without the proper voice_setting can cause
the controller to lock up.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_PAGE_SCAN_TYPE.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_VOICE_SETTING.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() for readability.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() for readability.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mgmt_start_discovery_complete() and mgmt_stop_discovery_complete() last
uses were removed in 2022 by
commit ec2904c259 ("Bluetooth: Remove dead code from hci_request.c")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
