Expose timestamp information supported by the GPU with a new device
query.
Mali uses an external timer as GPU system time. On ARM, this is wired to
the generic arch timer so we wire cntfrq_el0 as device frequency.
This new uAPI will be used in Mesa to implement timestamp queries and
VK_KHR_calibrated_timestamps.
Since this extends the uAPI and because userland needs a way to advertise
those features conditionally, this also bumps the driver minor version.
v2:
- Rewrote to use GPU timestamp register
- Added timestamp_offset to drm_panthor_timestamp_info
- Add missing include for arch_timer_get_cntfrq
- Rework commit message
v3:
- Add panthor_gpu_read_64bit_counter
- Change panthor_gpu_read_timestamp to use
panthor_gpu_read_64bit_counter
v4:
- Fix multiple typos in uAPI documentation
- Mention behavior when the timestamp frequency is unknown
- Use u64 instead of unsigned long long
for panthor_gpu_read_timestamp
- Apply r-b from Mihail
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830080349.24736-2-mary.guillemard@collabora.com
We were allowing any users to create a high priority group without any
permission checks. As a result, this was allowing possible denial of
service.
We now only allow the DRM master or users with the CAP_SYS_NICE
capability to set higher priorities than PANTHOR_GROUP_PRIORITY_MEDIUM.
As the sole user of that uAPI lives in Mesa and hardcode a value of
MEDIUM [1], this should be safe to do.
Additionally, as those checks are performed at the ioctl level,
panthor_group_create now only check for priority level validity.
[1]f390835074/src/gallium/drivers/panfrost/pan_csf.c (L1038)
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Cc: stable@vger.kernel.org
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903144955.144278-2-mary.guillemard@collabora.com
Extend the uAPI with a new job requirement flag for cycle
counters. This requirement is used by userland to indicate that a job
requires cycle counters or system timestamp to be propagated. (for use
with write value timestamp jobs)
We cannot enable cycle counters unconditionally as this would result in
an increase of GPU power consumption. As a result, they should be left
off unless required by the application.
If a job requires cycle counters or system timestamps propagation, we
must enable cycle counting before issuing a job and disable it right
after the job completes.
Since this extends the uAPI and because userland needs a way to advertise
features like VK_KHR_shader_clock conditionally, we bumps the driver
minor version.
v2:
- Rework commit message
- Squash uAPI changes and implementation in this commit
- Simplify changes based on Steven Price comments
v3:
- Add Steven Price r-b
- Fix a codestyle issue
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240819080224.24914-3-mary.guillemard@collabora.com
Expose system timestamp and frequency supported by the GPU.
Mali uses an external timer as GPU system time. On ARM, this is wired to
the generic arch timer so we wire cntfrq_el0 as device frequency.
This new uAPI will be used in Mesa to implement timestamp queries and
VK_KHR_calibrated_timestamps.
v2:
- Rewrote to use GPU timestamp register
- Add missing include for arch_timer_get_cntfrq
- Rework commit message
v3:
- Move panfrost_cycle_counter_get and panfrost_cycle_counter_put to
panfrost_ioctl_query_timestamp
- Handle possible overflow in panfrost_timestamp_read
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240819080224.24914-2-mary.guillemard@collabora.com
This adds extra parameters that affect UBWC tiling that will be used by
the Mesa implementation of VK_EXT_host_image_copy.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607401/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Need to take some Xe bo definition in here before
we can add the BMG display 64k aligned size restrictions.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add Tile4 type ccs modifiers to indicate presence of compression on Xe2.
Here is defined I915_FORMAT_MOD_4_TILED_LNL_CCS which is meant for
integrated graphics with igpu related limitations
Here is also defined I915_FORMAT_MOD_4_TILED_BMG_CCS which is meant
for discrete graphics with dgpu related limitations
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816115229.531671-3-juhapekka.heikkila@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When building with gcc-5:
In function ‘decode_oa_format.isra.26’,
inlined from ‘xe_oa_set_prop_oa_format’ at drivers/gpu/drm/xe/xe_oa.c:1664:6:
././include/linux/compiler_types.h:510:38: error: call to ‘__compiletime_assert_1336’ declared with attribute error: FIELD_GET: mask is not constant
[...]
./include/linux/bitfield.h:155:3: note: in expansion of macro ‘__BF_FIELD_CHECK’
__BF_FIELD_CHECK(_mask, _reg, 0U, "FIELD_GET: "); \
^
drivers/gpu/drm/xe/xe_oa.c:1573:18: note: in expansion of macro ‘FIELD_GET’
u32 bc_report = FIELD_GET(DRM_XE_OA_FORMAT_MASK_BC_REPORT, fmt);
^
Fixes: b6fd51c621 ("drm/xe/oa/uapi: Define and parse OA stream properties")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729092634.2227611-1-geert+renesas@glider.be
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit f2881dfdaa)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This patch takes care of the following warnings during documentation
compiling:
./include/uapi/drm/drm_mode.h:869: warning: Function parameter or struct member 'width' not described in 'drm_plane_size_hint'
./include/uapi/drm/drm_mode.h:869: warning: Function parameter or struct member 'height' not described in 'drm_plane_size_hint'
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240811101653.170223-1-pvmohammedanees2003@gmail.com
UAPI Changes:
- Rename xe perf layer as xe observation layer, but was
also made available via fixes to previous verison (Ashutosh)
- Use write-back caching mode for system memory on DGFX,
but was also mad available via fixes to previous version (Thomas)
- Expose SIMD16 EU mask in topology query for userspace to know
the type of EU, as available in PVC, Lunar Lake and Battlemage
(Lucas)
- Return ENOBUFS instead of ENOMEM in vm_bind if failure is tied
to an array of binds (Matthew Brost)
Driver Changes:
- Log cleanup moving messages to debug priority (Michal Wajdeczko)
- Add timeout to fences to adhere to dma_buf rules (Matthew Brost)
- Rename old engine nomenclature to exec_queue (Matthew Brost)
- Convert multiple bind ops to 1 job (Matthew Brost)
- Add error injection for vm bind to help testing error path
(Matthew Brost)
- Fix error handling in page table to propagate correctly
to userspace (Matthew Brost)
- Re-organize and cleanup SR-IOV related registers (Michal Wajdeczko)
- Make the device write barrier compatible with VF (Michal Wajdeczko)
- New display workarounds for Battlemage (Matthew Auld)
- New media workarounds for Lunar Lake and Battlemage (Ngai-Mint Kwan)
- New graphics workarounds for Lunar Lake (Bommu Krishnaiah)
- Tracepoint updates (Matthew Brost, Nirmoy Das)
- Cleanup the header generation for OOB workarounds (Lucas De Marchi)
- Fix leaking HDCP-related object (Nirmoy Das)
- Serialize L2 flushes to avoid races (Tejas Upadhyay)
- Log pid and comm on job timeout (José Roberto de Souza)
- Simplify boilerplate code for live kunit (Michal Wajdeczko)
- Improve kunit skips for live kunit (Michal Wajdeczko)
- Fix xe_sync cleanup when handling xe_exec ioctl (Ashutosh Dixit)
- Limit fair VF LMEM provisioning (Michal Wajdeczko)
- New workaround to fence mmio writes in Lunar Lake (Tejas Upadhyay)
- Warn on writes inaccessible register in VF (Michal Wajdeczko)
- Fix register lookup in VF (Michal Wajdeczko)
- Add GSC support for Battlemage (Alexander Usyskin)
- Fix wedging only the GT in which timeout occurred (Matthew Brost)
- Block device suspend when wedging (Matthew Brost)
- Handle compression and migration changes for Battlemage
(Akshata Jahagirdar)
- Limit access of stolen memory for Lunar Lake (Uma Shankar)
- Fail invalid addresses during user fence creation (Matthew Brost)
- Refcount xe_file to safely and accurately store fdinfo stats
(Umesh Nerlige Ramappa)
- Cleanup and fix PM reference for TLB invalidation code
(Matthew Brost)
- Fix PM reference handling when communicating with GuC (Matthew Brost)
- Add new BO flag for 2 MiB alignement and use in VF (Michal Wajdeczko)
- Simplify MMIO setup for multi-tile platforms (Lucas De Marchi)
- Add check for uninitialized access to OOB workarounds
(Lucas De Marchi)
- New GSC and HuC firmware blobs for Lunar Lake and Battlemage
(Daniele Ceraolo Spurio)
- Unify mmio wait logic (Gustavo Sousa)
- Fix off-by-one when processing RTP rules (Lucas De Marchi)
- Future-proof migrate logic with compressed PAT flag (Matt Roper)
- Add WA kunit tests for Battlemage (Lucas De Marchi)
- Test active tracking for workaorunds with kunit (Lucas De Marchi)
- Add kunit tests for RTP with no actions (Lucas De Marchi)
- Unify parse of OR rules in RTP (Lucas De Marchi)
- Add performance tuning for Battlemage (Sai Teja Pottumuttu)
- Make bit masks unsigned (Geert Uytterhoeven)
-----BEGIN PGP SIGNATURE-----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=xmxR
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-07-30' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
drm-xe-next for 6.12
UAPI Changes:
- Rename xe perf layer as xe observation layer, but was
also made available via fixes to previous verison (Ashutosh)
- Use write-back caching mode for system memory on DGFX,
but was also mad available via fixes to previous version (Thomas)
- Expose SIMD16 EU mask in topology query for userspace to know
the type of EU, as available in PVC, Lunar Lake and Battlemage
(Lucas)
- Return ENOBUFS instead of ENOMEM in vm_bind if failure is tied
to an array of binds (Matthew Brost)
Driver Changes:
- Log cleanup moving messages to debug priority (Michal Wajdeczko)
- Add timeout to fences to adhere to dma_buf rules (Matthew Brost)
- Rename old engine nomenclature to exec_queue (Matthew Brost)
- Convert multiple bind ops to 1 job (Matthew Brost)
- Add error injection for vm bind to help testing error path
(Matthew Brost)
- Fix error handling in page table to propagate correctly
to userspace (Matthew Brost)
- Re-organize and cleanup SR-IOV related registers (Michal Wajdeczko)
- Make the device write barrier compatible with VF (Michal Wajdeczko)
- New display workarounds for Battlemage (Matthew Auld)
- New media workarounds for Lunar Lake and Battlemage (Ngai-Mint Kwan)
- New graphics workarounds for Lunar Lake (Bommu Krishnaiah)
- Tracepoint updates (Matthew Brost, Nirmoy Das)
- Cleanup the header generation for OOB workarounds (Lucas De Marchi)
- Fix leaking HDCP-related object (Nirmoy Das)
- Serialize L2 flushes to avoid races (Tejas Upadhyay)
- Log pid and comm on job timeout (José Roberto de Souza)
- Simplify boilerplate code for live kunit (Michal Wajdeczko)
- Improve kunit skips for live kunit (Michal Wajdeczko)
- Fix xe_sync cleanup when handling xe_exec ioctl (Ashutosh Dixit)
- Limit fair VF LMEM provisioning (Michal Wajdeczko)
- New workaround to fence mmio writes in Lunar Lake (Tejas Upadhyay)
- Warn on writes inaccessible register in VF (Michal Wajdeczko)
- Fix register lookup in VF (Michal Wajdeczko)
- Add GSC support for Battlemage (Alexander Usyskin)
- Fix wedging only the GT in which timeout occurred (Matthew Brost)
- Block device suspend when wedging (Matthew Brost)
- Handle compression and migration changes for Battlemage
(Akshata Jahagirdar)
- Limit access of stolen memory for Lunar Lake (Uma Shankar)
- Fail invalid addresses during user fence creation (Matthew Brost)
- Refcount xe_file to safely and accurately store fdinfo stats
(Umesh Nerlige Ramappa)
- Cleanup and fix PM reference for TLB invalidation code
(Matthew Brost)
- Fix PM reference handling when communicating with GuC (Matthew Brost)
- Add new BO flag for 2 MiB alignement and use in VF (Michal Wajdeczko)
- Simplify MMIO setup for multi-tile platforms (Lucas De Marchi)
- Add check for uninitialized access to OOB workarounds
(Lucas De Marchi)
- New GSC and HuC firmware blobs for Lunar Lake and Battlemage
(Daniele Ceraolo Spurio)
- Unify mmio wait logic (Gustavo Sousa)
- Fix off-by-one when processing RTP rules (Lucas De Marchi)
- Future-proof migrate logic with compressed PAT flag (Matt Roper)
- Add WA kunit tests for Battlemage (Lucas De Marchi)
- Test active tracking for workaorunds with kunit (Lucas De Marchi)
- Add kunit tests for RTP with no actions (Lucas De Marchi)
- Unify parse of OR rules in RTP (Lucas De Marchi)
- Add performance tuning for Battlemage (Sai Teja Pottumuttu)
- Make bit masks unsigned (Geert Uytterhoeven)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/k7xuktfav4zmtxxjr77glu2hszypvzgmzghoumh757nqfnk7kn@ccfi4ts3ytbk
When building with gcc-5:
In function ‘decode_oa_format.isra.26’,
inlined from ‘xe_oa_set_prop_oa_format’ at drivers/gpu/drm/xe/xe_oa.c:1664:6:
././include/linux/compiler_types.h:510:38: error: call to ‘__compiletime_assert_1336’ declared with attribute error: FIELD_GET: mask is not constant
[...]
./include/linux/bitfield.h:155:3: note: in expansion of macro ‘__BF_FIELD_CHECK’
__BF_FIELD_CHECK(_mask, _reg, 0U, "FIELD_GET: "); \
^
drivers/gpu/drm/xe/xe_oa.c:1573:18: note: in expansion of macro ‘FIELD_GET’
u32 bc_report = FIELD_GET(DRM_XE_OA_FORMAT_MASK_BC_REPORT, fmt);
^
Fixes: b6fd51c621 ("drm/xe/oa/uapi: Define and parse OA stream properties")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729092634.2227611-1-geert+renesas@glider.be
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
PVC, Xe2 and later platforms have 16-wide EUs. We were implicitly
reporting for PVC the number of 16-wide EUs without giving userspace any
hint that they were different than for other platforms. Xe2 and later
also have 16-wide, but in those cases the reported number would
correspond to the 8-wide count.
To avoid confusion and make sure the right number is used by userspace
depending on the platform, add a new item to the topology query and drop
the one that is not available. The new mask reported for both PVC and
Xe2 should now match the numbers reported via hwconfig.
v2: Use a different topo item with EU type in its name to report the
new mask instead of adding the type itself as the item (Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Jablonski <mateusz.jablonski@intel.com>
Acked-by: Wenbin Lu <wenbin.lu@intel.com>
Acked-by: Effie Yu <effie.yu@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710220446.2169797-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa,
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts,
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4,
Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro.
- Reduce Gaudi2 MSI-X interrupt count to 128.
- Add Gaudi2-D revision support.
- Add timestamp to CPLD info.
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error.
- Align Gaudi2 interrupt names.
- Check for errors after preboot is ready.
- Change habanalabs maintainer and git repo path.
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT.
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates
-----BEGIN PGP SIGNATURE-----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=g+Ad
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
The caching mode for buffer objects with VRAM as a possible
placement was forced to write-combined, regardless of placement.
However, write-combined system memory is expensive to allocate and
even though it is pooled, the pool is expensive to shrink, since
it involves global CPU TLB flushes.
Moreover write-combined system memory from TTM is only reliably
available on x86 and DGFX doesn't have an x86 restriction.
So regardless of the cpu caching mode selected for a bo,
internally use write-back caching mode for system memory on DGFX.
Coherency is maintained, but user-space clients may perceive a
difference in cpu access speeds.
v2:
- Update RB- and Ack tags.
- Rephrase wording in xe_drm.h (Matt Roper)
v3:
- Really rephrase wording.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 622f709ca6 ("drm/xe/uapi: Add support for CPU caching mode")
Cc: Pallavi Mishra <pallavi.mishra@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 622f709ca6 ("drm/xe/uapi: Add support for CPU caching mode")
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Acked-by: Effie Yu <effie.yu@intel.com> #On chat
Link: https://patchwork.freedesktop.org/patch/msgid/20240705132828.27714-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 01e0cfc994)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In Xe, the perf layer allows capture of HW counter streams. These HW
counters are generally performance related but don't have to be necessarily
so. Also, the name "perf" is a carryover from i915 and is not preferred.
Here we propose the name "observation" for this common layer which allows
capture of different types of these counter streams.
v2: Rename observability layer to observation layer (Lucas/Rodrigo)
v3: Rename sysctl file to "observation_paranoid" (Jose)
Fixes: 52c2e956dc ("drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream types")
Fixes: fe8929bdf8 ("drm/xe/perf/uapi: Add perf_stream_paranoid sysctl")
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703164801.2561423-1-ashutosh.dixit@intel.com
(cherry picked from commit 8169b2097d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The `power saving policy` DRM property is an optional property that
can be added to a connector by a driver.
This property is for compositors to indicate intent of policy of
whether a driver can use power saving features that may compromise
the experience intended by the compositor.
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703051722.328-2-mario.limonciello@amd.com
The caching mode for buffer objects with VRAM as a possible
placement was forced to write-combined, regardless of placement.
However, write-combined system memory is expensive to allocate and
even though it is pooled, the pool is expensive to shrink, since
it involves global CPU TLB flushes.
Moreover write-combined system memory from TTM is only reliably
available on x86 and DGFX doesn't have an x86 restriction.
So regardless of the cpu caching mode selected for a bo,
internally use write-back caching mode for system memory on DGFX.
Coherency is maintained, but user-space clients may perceive a
difference in cpu access speeds.
v2:
- Update RB- and Ack tags.
- Rephrase wording in xe_drm.h (Matt Roper)
v3:
- Really rephrase wording.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 622f709ca6 ("drm/xe/uapi: Add support for CPU caching mode")
Cc: Pallavi Mishra <pallavi.mishra@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 622f709ca6 ("drm/xe/uapi: Add support for CPU caching mode")
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Acked-by: Effie Yu <effie.yu@intel.com> #On chat
Link: https://patchwork.freedesktop.org/patch/msgid/20240705132828.27714-1-thomas.hellstrom@linux.intel.com
Updates for v6.11
Core:
- SM7150 support
DPU:
- SM7150 support
- Fix DSC support for DSI panels in video mode
- Fixed TE vsync source support for DSI command-mode panels
- Fix for devices without UBWC in the display controller (ie.
QCM2290)
DSI:
- Remove unused register-writing wrappers
- Fix DSC support for panels in video mode
- Add support for parsing TE vsync source
- Add support for MSM8937 (28nm DSI PHY)
MDP5:
- Add support for MSM8937
- Fix configuration for MSM8953
GPU:
- Split giant device table into per-gen "hw catalog" similar to
what is done on the display side of the driver
- Fix a702 UBWC mode
- Fix unused variably warnings
- GPU memory traces
- Add param for userspace to know if raytracing is supported
- Memory barrier cleanup and GBIF unhalt fix
- X185 support (aka gpu in X1 laptop chips)
- a505 support
- fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvZQpYEHpSCgXGJ2kaHJDK6QFAFfTsfiWm4b2zZOnjXGw@mail.gmail.com
In Xe, the perf layer allows capture of HW counter streams. These HW
counters are generally performance related but don't have to be necessarily
so. Also, the name "perf" is a carryover from i915 and is not preferred.
Here we propose the name "observation" for this common layer which allows
capture of different types of these counter streams.
v2: Rename observability layer to observation layer (Lucas/Rodrigo)
v3: Rename sysctl file to "observation_paranoid" (Jose)
Fixes: 52c2e956dc ("drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream types")
Fixes: fe8929bdf8 ("drm/xe/perf/uapi: Add perf_stream_paranoid sysctl")
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703164801.2561423-1-ashutosh.dixit@intel.com
A sync-only job is meant to provide a synchronization point on a
queue, so we can't return a NULL fence there, we have to add a signal
operation to the command stream which executes after all other
previously submitted jobs are done.
v2:
- Fixed a UAF bug
- Added R-bs
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703071640.231278-3-boris.brezillon@collabora.com
It verified GFX9-11 swizzle modes on GFX12, which has undefined behavior.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They were added accidentally.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- New uapi adding OA functionality to Xe (Ashutosh)
Cross-subsystem Changes:
- devcoredump: Add dev_coredumpm_timeout (Jose)
Driver Changes:
- More SRIOV preparation, including GuC communication improvements (Michal)
- Kconfig update: do not select ACPI_BUTTON (Jani)
- Rework GPU page fault handling (Brost)
- Forcewake clean-up and fixes (Himal, Michal)
- Drop EXEC_QUEUE_FLAG_BANNED (Brost)
- Xe/Xe2 Workarounds fixes and additions (Tejas, Akshata, Sai, Vinay)
- Xe devcoredump changes (Jose)
- Tracing cleanup and add mmio tracing (RK)
- Add BMG PCI IDs (Roper)
- Scheduler fixes and improvements (Brost)
- Some overal driver clean-up around headers and print macros (Michal)
- Rename xe_exec_queue::compute to xe_exec_queue::lr (Francois)
- Improve RTP rules to allow easier 'OR' conditions in WA declaration (Lucas)
- Use ttm_uncached for BO with NEEDS_UC flag (Michal)
- Other OA related work and fixes (Ashutosh, Michal, Jose)
- Simplify locking in new_vma (Brost)
- Remove xe_irq_shutdown (Ilia)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmZ8lnAACgkQ+mJfZA7r
E8qFfgf9HjV+KYoqqTuMX3A9wgAHZ6uAs5Z2EhhOcg/G317Mdh64XvsjN8HGSNWb
1ZIZivuelyGPBjYsPF/naeCnI5tj4r9NLDw7M1+PHoeCiQpL6GyPciQxF68Vxbfe
p6BqQH18CjtbuIunYMs/Z4Zlrj9W7xIiOqrzbysYW8LlHnnXcDFeigBVP9P2rhpl
Dh2sTl7IR5Cc9tWZyr+6Q8qqsUvK5MlgUEjGRyAre1y6pyNsWLg+R0vcn9+JRtYB
LLnh+037qN63FoN09sS/ZBw6ZNyQ9czoEDaJHzGud9eng/AmzLzzQtC9jvUDYFml
w+7Ld4FASkxt9O3x/ynFIxuwcCjNiw==
=KrT1
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-06-26' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- New uapi adding OA functionality to Xe (Ashutosh)
Cross-subsystem Changes:
- devcoredump: Add dev_coredumpm_timeout (Jose)
Driver Changes:
- More SRIOV preparation, including GuC communication improvements (Michal)
- Kconfig update: do not select ACPI_BUTTON (Jani)
- Rework GPU page fault handling (Brost)
- Forcewake clean-up and fixes (Himal, Michal)
- Drop EXEC_QUEUE_FLAG_BANNED (Brost)
- Xe/Xe2 Workarounds fixes and additions (Tejas, Akshata, Sai, Vinay)
- Xe devcoredump changes (Jose)
- Tracing cleanup and add mmio tracing (RK)
- Add BMG PCI IDs (Roper)
- Scheduler fixes and improvements (Brost)
- Some overal driver clean-up around headers and print macros (Michal)
- Rename xe_exec_queue::compute to xe_exec_queue::lr (Francois)
- Improve RTP rules to allow easier 'OR' conditions in WA declaration (Lucas)
- Use ttm_uncached for BO with NEEDS_UC flag (Michal)
- Other OA related work and fixes (Ashutosh, Michal, Jose)
- Simplify locking in new_vma (Brost)
- Remove xe_irq_shutdown (Ilia)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZnyW9RdC_aWSla_q@intel.com
Mesa VK_KHR_performance_query use case requires preemption and timeslicing
to be disabled for the stream exec queue. Implement this functionality
here.
v2: Minor change to debug print to print both ret values (Umesh)
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626181817.1516229-3-ashutosh.dixit@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix kernel doc in xe_drm.h. Also eliminate private/non-abi enum
definitions.
v2: Remove __DRM_XE_PERF_TYPE_MAX since it is unused (Michal)
v3: Also remove DRM_XE_OA_PROPERTY_MAX since it can also be
eliminated (Michal)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240623203119.3840283-1-ashutosh.dixit@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Need to sync some header include that propagated through
drm-intel-next.
v2: After some changes in drm/drm-next
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Expose the value of the software fuse to userspace.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/592044/
Signed-off-by: Rob Clark <robdclark@chromium.org>
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZlhUKAAKCRAnX84Zoj2+
dgHoAYDTpShgXFXnlnMtqZr+ZuShcjcwiqzwM4qNWdtyji9MONtJJU3ZQnGlnXbI
ZU+oZP0Bf0PyT0/8bf+rmZBJ1UdAxt2IQaLkP1tTHOad4E+KlcL5n1opzMi160mB
EZSm9f7aNw==
=bZPt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-05-30' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.11:
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530-hilarious-flat-magpie-5fa186@houat
Implement query for properties of OA units present on a device.
v2: Clean up reserved/pad fields (Umesh)
Follow the same scheme as other query structs
v3: Skip reporting reserved engines attached to OA units
v4: Expose oa_buf_size via DRM_XE_PERF_IOCTL_INFO (Umesh)
v5: Don't expose capabilities as OR of properties (Umesh)
v6: Add extensions to query output structs: drm_xe_oa_unit,
drm_xe_query_oa_units and drm_xe_oa_stream_info
v7: Change oa_units[] array to __u64 type
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-13-ashutosh.dixit@intel.com
Implement the OA stream read file_operation. Both blocking and non-blocking
reads are supported. As part of read system call, the read copies OA perf
data from the OA buffer to the user buffer, after appending packet headers
for status and data packets.
v2: Drop OA report headers, implement DRM_XE_PERF_IOCTL_STATUS (Umesh)
v3: Introduce 'struct drm_xe_oa_stream_status'
v4: Define oa_status register bitfields (Umesh)
v5: Add extensions to 'struct drm_xe_oa_stream_status'
v6: Minor cleanup, eliminate report32 variable
v7: Use -EIO to signal to userspace to read OASTATUS using
DRM_XE_PERF_IOCTL_STATUS, change previous sites returning -EIO to
return -EINVAL
Make drm_xe_oa_stream_status bits contiguous (Jose, Umesh)
rmw oa_status bits (Umesh)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-10-ashutosh.dixit@intel.com
The OA stream open perf op returns an fd with its own file_operations for
the newly initialized OA stream. These file_operations allow userspace to
enable or disable the stream, as well as apply a different metric
configuration for the OA stream. Userspace can also poll for data
availability. OA stream initialization is completed in this commit by
enabling the OA stream. When sampling is enabled this starts a hrtimer
which periodically checks for data availablility.
v2: Use stream properties for stream reconfiguration with
DRM_XE_PERF_IOCTL_CONFIG
v3: Hold runtime_pm reference across oa buffer alloc/free
v4: Fix 32 bit build
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-9-ashutosh.dixit@intel.com
Properties for OA streams are specified by user space, when the stream is
opened, as a chain of drm_xe_ext_set_property struct's. Parse and validate
these stream properties.
v2: Remove struct drm_xe_oa_open_param (Harish Chegondi)
Drop DRM_XE_OA_PROPERTY_POLL_OA_PERIOD_US (Umesh)
Eliminate comparison with xe_oa_max_sample_rate (Umesh)
Drop 'struct drm_xe_oa_record_header' (Umesh)
v3: s/DRM_XE_OA_PROPERTY_OA_EXPONENT/ \
DRM_XE_OA_PROPERTY_OA_PERIOD_EXPONENT/ (Jose)
v4: Fix 32 bit build
v5: Add non-static function kernel doc (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-7-ashutosh.dixit@intel.com
Introduce add/remove config perf ops for OA. OA configurations consist of a
set of event/counter select register address/value pairs. The add_config
perf op validates and stores such configurations and also exposes them in
the metrics sysfs. These configurations will be programmed to OA unit HW
when an OA stream using a configuration is opened. The OA stream can also
switch to other stored configurations.
v2: Start config id's from 1 and other minor review comments (Umesh)
v3: Add 32 bit build
v4: Add kernel doc for non-static functions (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-6-ashutosh.dixit@intel.com
Initialize OA unit data struct's for each gt during device probe. Also
assign OA units for hardware engines.
v2: Remove XE_OA_UNIT_OAG/XE_OA_UNIT_OAM_SAMEDIA_0 enum (Umesh)
Change mtl_oa_base to 0x13000 (Umesh)
v3: Switch to drmm_ functions and other cleanups (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-5-ashutosh.dixit@intel.com
Add and initialize supported OA data formats for various platforms
(including Xe2). User can request OA data in any supported format.
Bspec: 52198, 60942, 61101
v2: Start 'xe_oa_format_name' enum from 0 (Umesh)
Fix error rewind with OA (Umesh)
v3: Use graphics versions rather than absolute platform names
v4: Add missing kernel doc for struct memebers and enum and other minor
changes (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-4-ashutosh.dixit@intel.com
In Xe, the plan is to support multiple types of perf counter streams (OA is
only one type of these streams). Rather than introduce NxM ioctls for
these (N perf streams with M ioctl's per perf stream), we decide to
multiplex these (N different stream types and the M ops for each of these
stream types) through a single PERF ioctl. This multiplexing is the purpose
of the PERF layer.
In addition to PERF DRM ioctl's, another set of ioctl's on the PERF fd are
defined. These are expected to be common to different PERF stream types and
therefore defined at the PERF layer itself.
v2: Add param_size to 'struct drm_xe_perf_param' (Umesh)
v3: Rename 'enum drm_xe_perf_ops' to
'enum drm_xe_perf_ioctls' (Guy Zadicario)
Add DRM_ prefix to ioctl names to indicate uapi names
v4: Add 'enum drm_xe_perf_op' previously missed out (Guy Zadicario)
v5: Squash the ops and PERF layer patches into a single patch (Umesh)
Remove param_size from struct 'drm_xe_perf_param' (Umesh)
v6: Add DRM_XE_PERF_IOCTL_STATUS
v7: Add DRM_XE_PERF_IOCTL_INFO
v8: Fix Copyright years, fix DRM_XE_PERF_TYPE_MAX, move '#include
"xe_perf.h"' to xe_perf.c, add kernel doc (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Guy Zadicario <gzadicario@habana.ai>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-2-ashutosh.dixit@intel.com
- Expose the L3 bank mask (Francois)
Cross-subsystem Changes:
- Update Xe driver maintainers (Oded)
Display (i915):
- Add missing include to intel_vga.c (Michal Wajdeczko)
Driver Changes:
- Fix Display (xe-only) detection for ADL-N (Lucas)
- Runtime PM fixes that enabled PC-10 and D3Cold (Francois, Rodrigo)
- Fix unexpected silent drm backmerge issues (Thomas)
- More (a lot more) preparation for SR-IOV support (Michal Wajdeczko)
- Devcoredump fixes and improvements (Jose, Tejas, Matt Brost)
- Introduce device 'wedged' state (Rodrigo)
- Improve debug and info messages (Michal Wajdeczko, Rodrigo, Nirmoy)
- Adding or fixing workarounds (Tejas, Shekhar, Lucas, Bommu)
- Check result of drmm_mutex_init (Michal Wajdeczko)
- Enlarge the critical dma fence area for preempt fences (Matt Auld)
- Prevent UAF in VM's rebind work (Matt Auld)
- GuC submit related clean-ups and fixes (Matt Brost, Himal, Jonathan, Niranjana)
- Prefer local helpers to perform dma reservation locking (Himal)
- Spelling and typo fixes (Colin, Francois)
- Prep patches for 1 job per VM bind IOCTL (no uapi change yet) (Matt Brost)
- Remove uninitialized end var from xe_gt_tlb_invalidation_range (Nirmoy)
- GSC related changes targeting LNL support (Daniele)
- Fix assert in L3 bank mask generation (Francois)
- Perform dma_map when moving system buffer objects to TT (Thomas)
- Add helpers for manipulating macro arguments (Michal Wajdeczko)
- Refactor default device atomic settings (Nirmoy)
- Add debugfs node to dump mocs (Janga)
- Use ordered WQ for G2H handler (Matt Brost)
- Clean up and fixes in header includes (Michal Wajdeczko)
- Prefer flexible-array over deprecated zero-lenght ones (Lucas)
- Add Indirect Ring State support (Niranjana)
- Fix UBSAN shift-out-of-bounds failure (Shuicheng)
- HWMon fixes and additions (Karthik)
- Clean-up refactor around probe init functions (Lucas, Michal Wajdeczko)
- Fix PCODE init function (Himal)
- Only use reserved BCS instances for usm migrate exec queue (Matt Brost)
- Only zap PTEs as needed (Matt Brost)
- Per client usage info (Lucas)
- Core hotunplug improvements converting stuff towards devm (Matt Auld)
- Don't emit false error if running in execlist mode (Michal Wajdeczko)
- Remove unused struct (Dr. David)
- Support/debug for slow GuC loads (John Harrison)
- Decouple job seqno and lrc seqno (Matt Brost)
- Allow migrate vm gpu submissions from reclaim context (Thomas)
- Rename drm-client running time to run_ticks and fix a UAF (Umesh)
- Check empty pinned BO list with lock held (Nirmoy)
- Drop undesired prefix from the platform name (Michal Wajdeczko)
- Remove unwanted mutex locking on xe file close (Niranjana)
- Replace format-less snprintf() with strscpy() (Arnd)
- Other general clean-ups on registers definitions and function names (Michal Wajdeczko)
- Add kernel-doc to some xe_lrc interfaces (Niranajana)
- Use missing lock in relay_needs_worker (Nirmoy)
- Drop redundant W=1 warnings from Makefile (Jani)
- Simplify if condition in preempt fences code (Thorsten)
- Flush engine buffers before signalling user fence on all engines (Andrzej)
- Don't overmap identity VRAM mapping (Matt Brost)
- Do not dereference NULL job->fence in trace points (Matt Brost)
- Add synchronous gt reset debugfs (Jonathan)
- Xe gt_idle fixes (Riana)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmZiLKoACgkQ+mJfZA7r
E8rbgwf9FcPeq0jLTfdv4TDj6n54P1jpyqiQJq6a59TXUAhKIBpPfh1KLztIaZPh
EzUS4vMz8qXZaNIxgrmD8oN6+BIhGiAxU5Qd1TK4trSFLyKjieQVaX6TQBPxWmNF
+jlhh1UAsVVcuhs1hDGLLMeWPkKhxI5mhVr7py5IJBYlv+8tYo1/KlkpeKuuGJpS
Re+DYVKS749QEOnxCsu1yFacKb56NqjzlEEa+S08a6f5AcWoZpMVV/NF9VDtZ4LK
genZAjGXbv0cfBR4EDtyS84KqiCOSeVcYGc2JgQQHo5qhUsY0UBariyEMe89c+LR
Pk02k5b4/UgbUUX/vnEPHE/auqUJHg==
=crL/
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-06-06' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Expose the L3 bank mask (Francois)
Cross-subsystem Changes:
- Update Xe driver maintainers (Oded)
Display (i915):
- Add missing include to intel_vga.c (Michal Wajdeczko)
Driver Changes:
- Fix Display (xe-only) detection for ADL-N (Lucas)
- Runtime PM fixes that enabled PC-10 and D3Cold (Francois, Rodrigo)
- Fix unexpected silent drm backmerge issues (Thomas)
- More (a lot more) preparation for SR-IOV support (Michal Wajdeczko)
- Devcoredump fixes and improvements (Jose, Tejas, Matt Brost)
- Introduce device 'wedged' state (Rodrigo)
- Improve debug and info messages (Michal Wajdeczko, Rodrigo, Nirmoy)
- Adding or fixing workarounds (Tejas, Shekhar, Lucas, Bommu)
- Check result of drmm_mutex_init (Michal Wajdeczko)
- Enlarge the critical dma fence area for preempt fences (Matt Auld)
- Prevent UAF in VM's rebind work (Matt Auld)
- GuC submit related clean-ups and fixes (Matt Brost, Himal, Jonathan, Niranjana)
- Prefer local helpers to perform dma reservation locking (Himal)
- Spelling and typo fixes (Colin, Francois)
- Prep patches for 1 job per VM bind IOCTL (no uapi change yet) (Matt Brost)
- Remove uninitialized end var from xe_gt_tlb_invalidation_range (Nirmoy)
- GSC related changes targeting LNL support (Daniele)
- Fix assert in L3 bank mask generation (Francois)
- Perform dma_map when moving system buffer objects to TT (Thomas)
- Add helpers for manipulating macro arguments (Michal Wajdeczko)
- Refactor default device atomic settings (Nirmoy)
- Add debugfs node to dump mocs (Janga)
- Use ordered WQ for G2H handler (Matt Brost)
- Clean up and fixes in header includes (Michal Wajdeczko)
- Prefer flexible-array over deprecated zero-lenght ones (Lucas)
- Add Indirect Ring State support (Niranjana)
- Fix UBSAN shift-out-of-bounds failure (Shuicheng)
- HWMon fixes and additions (Karthik)
- Clean-up refactor around probe init functions (Lucas, Michal Wajdeczko)
- Fix PCODE init function (Himal)
- Only use reserved BCS instances for usm migrate exec queue (Matt Brost)
- Only zap PTEs as needed (Matt Brost)
- Per client usage info (Lucas)
- Core hotunplug improvements converting stuff towards devm (Matt Auld)
- Don't emit false error if running in execlist mode (Michal Wajdeczko)
- Remove unused struct (Dr. David)
- Support/debug for slow GuC loads (John Harrison)
- Decouple job seqno and lrc seqno (Matt Brost)
- Allow migrate vm gpu submissions from reclaim context (Thomas)
- Rename drm-client running time to run_ticks and fix a UAF (Umesh)
- Check empty pinned BO list with lock held (Nirmoy)
- Drop undesired prefix from the platform name (Michal Wajdeczko)
- Remove unwanted mutex locking on xe file close (Niranjana)
- Replace format-less snprintf() with strscpy() (Arnd)
- Other general clean-ups on registers definitions and function names (Michal Wajdeczko)
- Add kernel-doc to some xe_lrc interfaces (Niranajana)
- Use missing lock in relay_needs_worker (Nirmoy)
- Drop redundant W=1 warnings from Makefile (Jani)
- Simplify if condition in preempt fences code (Thorsten)
- Flush engine buffers before signalling user fence on all engines (Andrzej)
- Don't overmap identity VRAM mapping (Matt Brost)
- Do not dereference NULL job->fence in trace points (Matt Brost)
- Add synchronous gt reset debugfs (Jonathan)
- Xe gt_idle fixes (Riana)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZmItmuf7vq_xvRjJ@intel.com
The L3 bank mask is already generated and stored internally with
the rest of the GT topology. In user space, the compute runtime
now needs this information to be added to the device properties
therefore the topology mask query is extended to provide a new
mask which represents the L3 banks enabled on the GT.
The changes in the compute runtime are ready and approved, see
link below.
v2: Rewrite commit message and add a link to the compute
runtime PR (Francois Dugast)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Robert Krzemien <robert.krzemien@intel.com>
Cc: Mateusz Jablonski <mateusz.jablonski@intel.com>
Link: https://github.com/intel/compute-runtime/pull/722
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Acked-by: Mateusz Jablonski <mateusz.jablonski@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416145037.7-2-francois.dugast@intel.com
The Performance Counters enum used to identify the index of each
performance counter and provide the total number of performance
counters (V3D_PERFCNT_NUM). But, this enum is only valid for V3D 4.2,
not for V3D 7.1.
As we implemented a new flexible structure to retrieve performance
counters information, we can deprecate this enum.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240512222655.2792754-7-mcanal@igalia.com
Userspace usually needs some information about the performance counters
available. Although we could replicate this information in the kernel
and user-space, let's use the kernel as the "single source of truth" to
avoid issues in the future (e.g. list of performance counters is updated
in user-space, but not in the kernel, generating invalid requests).
Therefore, create a new IOCTL to expose the performance counters
information, that is name, category, and description.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240512222655.2792754-5-mcanal@igalia.com
The maximum number of performance counters can change from version to
version and it's important for userspace to know this value, as it needs
to use the counters for performance queries. Therefore, expose the
maximum number of performance counters to userspace as a parameter.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240512222655.2792754-4-mcanal@igalia.com
When debugging GPU hangs Mesa developers are finding it useful to replay
the captured error state against the simulator. But due various simulator
limitations which prevent replicating all hangs, one step further is being
able to replay against a real GPU.
This is almost doable today with the missing part being able to upload the
captured context image into the driver state prior to executing the
uploaded hanging batch and all the buffers.
To enable this last part we add a new context parameter called
I915_CONTEXT_PARAM_CONTEXT_IMAGE. It follows the existing SSEU
configuration pattern of being able to select which context to apply
against, paired with the actual image and its size.
Since this is adding a new concept of debug only uapi, we hide it behind
a new kconfig option and also require activation with a module parameter.
Together with a warning banner printed at driver load, all those combined
should be sufficient to guard against inadvertently enabling the feature.
In terms of implementation we allow the legacy context set param to be
used since that removes the need to record the per context data in the
proto context, while still allowing flexibility of specifying context
images for any context.
Mesa MR using the uapi can be seen at:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27594
v2:
* Fix whitespace alignment as per checkpatch.
* Added warning on userspace misuse.
* Rebase for extracting ce->default_state shadowing.
v3:
* Rebase for I915_CONTEXT_PARAM_LOW_LATENCY.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Carlos Santa <carlos.santa@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145939.87427-2-tursulin@igalia.com
Implement time based Metric Streamer profiling UAPI.
This is a generic mechanism allowing user mode tools to sample
NPU metrics. These metrics are defined by the FW and transparent to
the driver.
The user space can check for this feature by checking
DRM_IVPU_CAP_METRIC_STREAMER driver capability.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-9-jacek.lawrynowicz@linux.intel.com
Make sure the user is aware that drm_panthor_tiler_heap_destroy::handle
must be a handle previously returned by
DRM_IOCTL_PANTHOR_TILER_HEAP_CREATE.
v4:
- Add Steve's R-b
v3:
- New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-6-boris.brezillon@collabora.com
The field used to store the chunk size if 12 bits wide, and the encoding
is chunk_size = chunk_header.chunk_size << 12, which gives us a
theoretical [4k:8M] range. This range is further limited by
implementation constraints, and all known implementations seem to
impose a [128k:8M] range, so do the same here.
We also relax the power-of-two constraint, which doesn't seem to
exist on v10. This will allow userspace to fine-tune initial/max
tiler memory on memory-constrained devices.
v4:
- Actually fix the range in the kerneldoc
v3:
- Add R-bs
- Fix valid range in the kerneldoc
v2:
- Turn the power-of-two constraint into a page-aligned constraint to allow
fine-tune of the initial/max heap memory size
- Fix the panthor_heap_create() kerneldoc
Fixes: 9cca48fa4f ("drm/panthor: Add the heap logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-4-boris.brezillon@collabora.com
It doesn't make sense to have a maximum number of chunks smaller than
the initial number of chunks attached to the context.
Fix the uAPI header to reflect the new constraint, and mention the
undocumented "initial_chunk_count > 0" constraint while at it.
v3:
- Add R-b
v2:
- Fix the check
Fixes: 9cca48fa4f ("drm/panthor: Add the heap logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-3-boris.brezillon@collabora.com
drm_color_ctm_3x4 is some undocumented amgdpu private
uapi and thus has no business being in drm_mode.h.
At least move it to some amdgpu specific header, albeit
with the wrong namespace as maybe something somewhere
is using this already?
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: 6872a189be ("drm/amd/display: Add 3x4 CTM support for plane CTM")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422085857.17651-1-ville.syrjala@linux.intel.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
UAPI Changes:
- drm/i915/guc: Use context hints for GT frequency
Allow user to provide a low latency context hint. When set, KMD
sends a hint to GuC which results in special handling for this
context. SLPC will ramp the GT frequency aggressively every time
it switches to this context. The down freq threshold will also be
lower so GuC will ramp down the GT freq for this context more slowly.
We also disable waitboost for this context as that will interfere with
the strategy.
We need to enable the use of SLPC Compute strategy during init, but
it will apply only to contexts that set this bit during context
creation.
Userland can check whether this feature is supported using a new param-
I915_PARAM_HAS_CONTEXT_FREQ_HINT. This flag is true for all guc submission
enabled platforms as they use SLPC for frequency management.
The Mesa usage model for this flag is here -
https://gitlab.freedesktop.org/sushmave/mesa/-/commits/compute_hint
- drm/i915/gt: Enable only one CCS for compute workload
Enable only one CCS engine by default with all the compute sices
allocated to it.
While generating the list of UABI engines to be exposed to the
user, exclude any additional CCS engines beyond the first
instance
***
NOTE: This W/A will make all DG2 SKUs appear like single CCS SKUs by
default to mitigate a hardware bug. All the EUs will still remain
usable, and all the userspace drivers have been confirmed to be able
to dynamically detect the change in number of CCS engines and adjust.
For the smaller percent of applications that get perf benefit from
letting the userspace driver dispatch across all 4 CCS engines we will
be introducing a sysfs control as a later patch to choose 4 CCS each
with 25% EUs (or 50% if 2 CCS).
NOTE: A regression has been reported at
https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895
However Andi has been triaging the issue and we're closing in a fix
to the gap in the W/A implementation:
https://lists.freedesktop.org/archives/intel-gfx/2024-April/348747.html
Driver Changes:
- Add new and fix to existing workarounds: Wa_14018575942 (MTL),
Wa_16019325821 (Gen12.70), Wa_14019159160 (MTL), Wa_16015675438,
Wa_14020495402 (Gen12.70) (Tejas, John, Lucas)
- Fix UAF on destroy against retire race and remove two earlier
partial fixes (Janusz)
- Limit the reserved VM space to only the platforms that need it (Andi)
- Reset queue_priority_hint on parking for execlist platforms (Chris)
- Fix gt reset with GuC submission is disabled (Nirmoy)
- Correct capture of EIR register on hang (John)
- Remove usage of the deprecated ida_simple_xx() API
- Refactor confusing __intel_gt_reset() (Nirmoy)
- Fix the fix for GuC reset lock confusion (John)
- Simplify/extend platform check for Wa_14018913170 (John)
- Replace dev_priv with i915 (Andi)
- Add and use gt_to_guc() wrapper (Andi)
- Remove bogus null check (Rodrigo, Dan)
. Selftest improvements (Janusz, Nirmoy, Daniele)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZitVBTvZmityDi7D@jlahtine-mobl.ger.corp.intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmYutdweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGG5oH/3Ggwz5N+gdEK3np
qxUfpgJTWo+fJ6xhRLGy84TnEZ9s9UnK0Su6UuVyOb0F/2Y8hesJ6iwB16yQFKNe
Nore/VvuBZ+utshz5N20yNyPugNOP74GGbyOm+d+iJwIKnmSE8jSjWyMwNFHJCZM
BfoBxZrpwU/YD/0PD1KkI44jhPX1H/EcEmtNiklLnuYvJydTWiRFeku+CSgcOiRz
6fIFrcZMREZrAytMQSwteBAvI3vWblC0S39ZgJmtZt+oi+s1ksIUNG8Mm5uMAiyF
LcGep2tWV06x9uB9XVvrk0qco/kOaUgYuQrHQwNu9LzsaUdYGKqBBMk41SoNXFkB
hBXN26U=
=N2E2
-----END PGP SIGNATURE-----
Merge v6.9-rc6 into drm-next
Thomas needs the defio fixes, Maíra needs the vkms fixes and Joonas
has some fun with i915-gem conflicts.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GFX12 swizzle mode and GCC formats changed and is much simpler. Use a
seperate function for the same. Changes:
* Swizzle mode is now 3 bits only
* DCC enablement doesn't come from tiling_flags, it is always set in modifiers
* DCC max compressed block size of 128B
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1dccdba084.
In userspace a different approach was choosen - hwdb. As a result, there
is no need for these values.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
- Remove unused flags (Francois Dugast)
- Extend uAPI to query HuC micro-controler firmware version (Francois Dugast)
- drm/xe/uapi: Define topology types as indexes rather than masks
(Francois Dugast)
- drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
(Francois Dugast)
- devcoredump updates. Some touching the output format.
(José Roberto de Souza, Matthew Brost)
- drm/xe/hwmon: Add infra to support card power and energy attributes
- Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst)
- drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper)
- Invalidate userptr VMA on page pin fault (Matthew Brost)
- Improve xe_bo_move tracepoint (Priyanka Danamudi)
- Align fence output format in ftrace log
Cross-driver Changes:
- drm/i915/hwmon: Get rid of devm (Ashutosh Dixit)
(Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>)
- drm/i915/display: convert inner wakeref get towards get_if_in_use
(SOB Rodrigo Vivi)
- drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref
(Committer, SOB Jani Nikula)
Driver Changes:
- Fix for unneeded CCS metadata allocation (Akshata Jahagirdar)
- Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda)
- A couple of build fixes (Arnd Bergmann)
- Fix register definition (Ashutosh Dixit)
- Add BMG mocs table (Balasubramani Vivekanandan)
- Replace sprintf() across driver (Bommu Krishnaiah)
- Add an xe2 workaround (Bommu Krishnaiah)
- Makefile fix (Dafna Hirschfeld)
- force_wake_get error value check (Daniele Ceraolo Spurio)
- Handle GSCCS ER interrupt (Daniele Ceraolo Spurio)
- GSC Workaround (Daniele Ceraolo Spurio)
- Build error fix (Dawei Li)
- drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast)
- Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala,
Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada,
Vinay Belgaumkar, Badal Nilawar)
- xe2hpg compression (Himal Ghimiray Prasad)
- Error code cleanups and fixes (Himal Prasad Ghimiray)
- struct xe_device cleanup (Jani Nikula)
- Avoid validating bos when only requesting an exec dma-fence
(José Roberto de Souza)
- Remove debug message from migrate_clear (José Roberto de Souza)
- Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza)
- Mark dpt and related vma as uncached (Juha-Pekka Heikkila)
- Hwmon updates (Karthik Poosa)
- KConfig fix when ACPI_WMI selcted (Lu Yao)
- Update intel_uncore_read*() return types (Luca Coelho)
- Mocs updates (Lucas De Marchi, Matt Roper)
- Drop dynamic load-balancing workaround (Lucas De Marchi)
- Fix a PVC workaround (Lucas De Marchi)
- Group live kunit tests into a single module (Lucas De Marchi)
- Various code cleanups (Lucas De Marchi)
- Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock
(Maarten Lankhorst)
- Fix a bo leak (Marten Lankhorst)
- Add LRC parsing for more GPU instructions (Matt Roper)
- Add various definitions for hardware and IP (Matt Roper)
- Define all possible engines in media IP descriptors (Matt Roper)
- Various cleanups, asserts and code fixes (Matthew Auld)
- Various cleanups and code fixes (Matthew Brost)
- Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni)
- Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost)
- Handle timing out of already signaled jobs gracefully (Matthew Brost)
- Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost)
- Do not grab forcewakes when issuing GGTT TLB invalidation via GuC
(Matthew Brost)
- Drop ggtt invalidate from display code (Matthew Brost)
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost)
- Add debug messages for MMU notifier and VMA invalidate (Matthew Brost)
- Use ordered wq for preempt fence waiting (Matthew Brost)
- Initial development for SR-IOV support including some refactoring
(Michal Wajdeczko)
- Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko)
- Move userptr over to start using hmm_range_fault (Oak Zeng)
- Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli)
- Pcode - and VRAM initialization check update (Riana Tauro)
- Large PM update including i915 display patches, and a fix for one of those.
(Rodrigo Vivi)
- Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan)
- GSC / HDCP updates (Suraj Kandpal)
- Minor code cleanup (Tejas Upadhyay)
- Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop
(Thomas Hellström)
- Backmerge (Thomas Hellström)
- GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG
v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0
vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM=
=HouD
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-04-23' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Remove unused flags (Francois Dugast)
- Extend uAPI to query HuC micro-controler firmware version (Francois Dugast)
- drm/xe/uapi: Define topology types as indexes rather than masks
(Francois Dugast)
- drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
(Francois Dugast)
- devcoredump updates. Some touching the output format.
(José Roberto de Souza, Matthew Brost)
- drm/xe/hwmon: Add infra to support card power and energy attributes
- Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst)
- drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper)
- Invalidate userptr VMA on page pin fault (Matthew Brost)
- Improve xe_bo_move tracepoint (Priyanka Danamudi)
- Align fence output format in ftrace log
Cross-driver Changes:
- drm/i915/hwmon: Get rid of devm (Ashutosh Dixit)
(Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>)
- drm/i915/display: convert inner wakeref get towards get_if_in_use
(SOB Rodrigo Vivi)
- drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref
(Committer, SOB Jani Nikula)
Driver Changes:
- Fix for unneeded CCS metadata allocation (Akshata Jahagirdar)
- Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda)
- A couple of build fixes (Arnd Bergmann)
- Fix register definition (Ashutosh Dixit)
- Add BMG mocs table (Balasubramani Vivekanandan)
- Replace sprintf() across driver (Bommu Krishnaiah)
- Add an xe2 workaround (Bommu Krishnaiah)
- Makefile fix (Dafna Hirschfeld)
- force_wake_get error value check (Daniele Ceraolo Spurio)
- Handle GSCCS ER interrupt (Daniele Ceraolo Spurio)
- GSC Workaround (Daniele Ceraolo Spurio)
- Build error fix (Dawei Li)
- drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast)
- Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala,
Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada,
Vinay Belgaumkar, Badal Nilawar)
- xe2hpg compression (Himal Ghimiray Prasad)
- Error code cleanups and fixes (Himal Prasad Ghimiray)
- struct xe_device cleanup (Jani Nikula)
- Avoid validating bos when only requesting an exec dma-fence
(José Roberto de Souza)
- Remove debug message from migrate_clear (José Roberto de Souza)
- Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza)
- Mark dpt and related vma as uncached (Juha-Pekka Heikkila)
- Hwmon updates (Karthik Poosa)
- KConfig fix when ACPI_WMI selcted (Lu Yao)
- Update intel_uncore_read*() return types (Luca Coelho)
- Mocs updates (Lucas De Marchi, Matt Roper)
- Drop dynamic load-balancing workaround (Lucas De Marchi)
- Fix a PVC workaround (Lucas De Marchi)
- Group live kunit tests into a single module (Lucas De Marchi)
- Various code cleanups (Lucas De Marchi)
- Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock
(Maarten Lankhorst)
- Fix a bo leak (Marten Lankhorst)
- Add LRC parsing for more GPU instructions (Matt Roper)
- Add various definitions for hardware and IP (Matt Roper)
- Define all possible engines in media IP descriptors (Matt Roper)
- Various cleanups, asserts and code fixes (Matthew Auld)
- Various cleanups and code fixes (Matthew Brost)
- Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni)
- Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost)
- Handle timing out of already signaled jobs gracefully (Matthew Brost)
- Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost)
- Do not grab forcewakes when issuing GGTT TLB invalidation via GuC
(Matthew Brost)
- Drop ggtt invalidate from display code (Matthew Brost)
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost)
- Add debug messages for MMU notifier and VMA invalidate (Matthew Brost)
- Use ordered wq for preempt fence waiting (Matthew Brost)
- Initial development for SR-IOV support including some refactoring
(Michal Wajdeczko)
- Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko)
- Move userptr over to start using hmm_range_fault (Oak Zeng)
- Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli)
- Pcode - and VRAM initialization check update (Riana Tauro)
- Large PM update including i915 display patches, and a fix for one of those.
(Rodrigo Vivi)
- Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan)
- GSC / HDCP updates (Suraj Kandpal)
- Minor code cleanup (Tejas Upadhyay)
- Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop
(Thomas Hellström)
- Backmerge (Thomas Hellström)
- GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG
# v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0
# vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM=
# =HouD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Apr 2024 22:42:29 AEST
# gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF
# gpg: Can't check signature: No public key
# Conflicts:
# drivers/gpu/drm/xe/xe_device_types.h
# drivers/gpu/drm/xe/xe_vm.c
# drivers/gpu/drm/xe/xe_vm_types.h
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zievlb1wvqDg1ovi@fedora
drm-misc-next for v6.10-rc1:
UAPI Changes:
- Add SIZE_HINTS property for cursor planes.
Cross-subsystem Changes:
Core Changes:
- Document the requirements and expectations of adding new
driver-specific properties.
- Assorted small fixes to ttm.
- More Kconfig fixes.
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- Fixes for drm-panic, and option to test it.
- Assorted small fixes and updates to edid.
- Add drm_crtc_vblank_crtc and use it in vkms, nouveau.
Driver Changes:
- Assorted small fixes and improvements to bridge/imx8mp-hdmi-tx, nouveau, ast, qaic, lima, vc4, bridge/anx7625, mipi-dsi.
- Add drm panic to simpledrm, mgag200, imx, ast.
- Use dev_err_probe in bridge/panel drivers.
- Add Innolux G121X1-L03, LG sw43408 panels.
- Use struct drm_edid in i915 bios parsing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2dc1b7c6-1743-4ddd-ad42-36f700234fbe@linux.intel.com
- Fix documentation of DP tunnel functions (Imre)
- DP MST read sideband messaging cap (Jani)
- Preparation patches for Adaptive Sync SDP Support for DP (Mitul)
Driver Changes:
i915 core (non-display):
- Documentation improvements (Nirmoy)
- Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas)
- Do not print 'pxp init failed with 0' when it succeed (Jose)
- Clean-up, including removal of dead code for unsupported platforms (Lucas)
- Adding new DG2 PCI ID (Ravi)
{i915,xe} display:
- Spelling fix (Colin Ian)
- Document CDCLK components (Gustavo)
- Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala)
- BIOS/VBT/opregion related refactor (Jani, Ville, RK)
- Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe)
- Digital port related refactor/clean-up (Ville)
- Fix 2s boot time regression on DP panel replay init (Animesh)
- Remove redundant drm_rect_visible() overlay use (Arthur)
- DSC HW state readout fixes (Imre)
- Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville)
- Disable AuxCCS framebuffers if built for Xe (Juha-Pekka)
- Fix DSI init order (Ville)
- DRRS related refactor and fixes (Bhanuprakash)
- Fix DSB vblank waits with VRR (Ville)
- General improvements on register name and use of REG_BIT (Ville)
- Some display power well related improvements (Ville)
- FBC changes for better w/a handling (Ville)
- Make crtc disable more atomic (Ville)
- Fix hwmon locking inversion in sysfs getter (Janusz)
- Increase DP idle pattern wait timeout to 2ms (Shekhar)
- PSR related fixes and improvents (Jouni)
- Start using container_of_const() for some extra const safety (Ville)
- Use drm_printer more on display code (Ville)
- Fix Jasper Lake boot freeze (Jonathon)
- Update Pipe src size check in skl_update_scaler (Ankit)
- Enable MST mode for 128b/132b single-stream sideband (Jani)
- Pass encoder around more for port/phy checks (Jani)
- Some initial work to make display code more independent from i915 (Jani)
- Pre-populate the cursor physical dma address (Ville)
- Do not bump min backlight brightness to max on enable (Gareth)
- Fix MTL supported DP rates - removal of UHBR13.5 (Arun)
- Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit)
- Bigjoiner modeset sequence redesign and MST support (Ville)
- Enable Adaptive Sync SDP Support for DP (Mitul)
- Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav)
- HDCP related fixes (Suraj)
- Fix i915_display_info debugfs when connectors are not active (Ville)
- Clean up on Xe compat layer (Jani)
- Add jitter WAs for MST/FEC/DSC links (Imre)
- DMC wakelock implementation (Luca)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r
E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu
bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF
02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv
8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ
ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx
7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ==
=JvZN
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2024-04-17-1' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-next
Core Changes (DRM):
- Fix documentation of DP tunnel functions (Imre)
- DP MST read sideband messaging cap (Jani)
- Preparation patches for Adaptive Sync SDP Support for DP (Mitul)
Driver Changes:
i915 core (non-display):
- Documentation improvements (Nirmoy)
- Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas)
- Do not print 'pxp init failed with 0' when it succeed (Jose)
- Clean-up, including removal of dead code for unsupported platforms (Lucas)
- Adding new DG2 PCI ID (Ravi)
{i915,xe} display:
- Spelling fix (Colin Ian)
- Document CDCLK components (Gustavo)
- Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala)
- BIOS/VBT/opregion related refactor (Jani, Ville, RK)
- Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe)
- Digital port related refactor/clean-up (Ville)
- Fix 2s boot time regression on DP panel replay init (Animesh)
- Remove redundant drm_rect_visible() overlay use (Arthur)
- DSC HW state readout fixes (Imre)
- Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville)
- Disable AuxCCS framebuffers if built for Xe (Juha-Pekka)
- Fix DSI init order (Ville)
- DRRS related refactor and fixes (Bhanuprakash)
- Fix DSB vblank waits with VRR (Ville)
- General improvements on register name and use of REG_BIT (Ville)
- Some display power well related improvements (Ville)
- FBC changes for better w/a handling (Ville)
- Make crtc disable more atomic (Ville)
- Fix hwmon locking inversion in sysfs getter (Janusz)
- Increase DP idle pattern wait timeout to 2ms (Shekhar)
- PSR related fixes and improvents (Jouni)
- Start using container_of_const() for some extra const safety (Ville)
- Use drm_printer more on display code (Ville)
- Fix Jasper Lake boot freeze (Jonathon)
- Update Pipe src size check in skl_update_scaler (Ankit)
- Enable MST mode for 128b/132b single-stream sideband (Jani)
- Pass encoder around more for port/phy checks (Jani)
- Some initial work to make display code more independent from i915 (Jani)
- Pre-populate the cursor physical dma address (Ville)
- Do not bump min backlight brightness to max on enable (Gareth)
- Fix MTL supported DP rates - removal of UHBR13.5 (Arun)
- Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit)
- Bigjoiner modeset sequence redesign and MST support (Ville)
- Enable Adaptive Sync SDP Support for DP (Mitul)
- Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav)
- HDCP related fixes (Suraj)
- Fix i915_display_info debugfs when connectors are not active (Ville)
- Clean up on Xe compat layer (Jani)
- Add jitter WAs for MST/FEC/DSC links (Imre)
- DMC wakelock implementation (Luca)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r
# E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu
# bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF
# 02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv
# 8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ
# ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx
# 7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ==
# =JvZN
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Apr 2024 23:22:09 AEST
# gpg: using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown]
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zh_Q72gYKMMbge9A@intel.com
Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd04.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add a new immutable plane property by which a plane can advertise
a handful of recommended plane sizes. This would be mostly exposed
by cursor planes as a slightly more capable replacement for
the DRM_CAP_CURSOR_WIDTH/HEIGHT caps, which can only declare
a one size fits all limit for the whole device.
Currently eg. amdgpu/i915/nouveau just advertize the max cursor
size via the cursor size caps. But always using the max sized
cursor can waste a surprising amount of power, so a better
strategy is desirable.
Most other drivers don't specify any cursor size at all, in
which case the ioctl code just claims that 64x64 is a great
choice. Whether that is actually true is debatable.
A poll of various compositor developers informs us that
blindly probing with setcursor/atomic ioctl to determine
suitable cursor sizes is not acceptable, thus the
introduction of the new property to supplant the cursor
size caps. The compositor will now be free to select a
more optimal cursor size from the short list of options.
Note that the reported sizes (either via the property or the
caps) make no claims about things such as plane scaling. So
these things should only really be consulted for simple
"cursor like" use cases.
Userspace consumer in the form of mutter seems ready:
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3165
v2: Try to add some docs
v3: Specify that value 0 is reserved for future use (basic idea from Jonas)
Drop the note about typical hardware (Pekka)
v4: Update the docs to indicate the list is "in order of preference"
Add a a link to the mutter MR
v5: Limit to cursors only for now (Simon)
Cc: Jonas Ådahl <jadahl@redhat.com>
Cc: Sameer Lattannavar <sameer.lattannavar@intel.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318204408.9687-2-ville.syrjala@linux.intel.com
The commit 84a1ed5e67 ("drm/xe/uapi: Remove unused flags") is partially
reverted. At the time, flags not used by user space were removed during
cleanup. Some flags now needed by the compute runtime are brought back in
this commit:
- DRM_XE_VM_BIND_FLAG_READONLY is used to write protect kernel ISA thus
preventing accidental overwrites.
- DRM_XE_VM_BIND_FLAG_IMMEDIATE is used to trigger mapping at the time of
binding in order to prevent faulting at execution time.
The changes in the compute runtime are ready and approved, see link below.
v2: Include a link to the PR in the commit message (Matthew Brost)
v3: Update kernel doc and improve commit message (Lucas De Marchi)
Cc: Mateusz Jablonski <mateusz.jablonski@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://github.com/intel/compute-runtime/pull/717
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240329124403.7-1-francois.dugast@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Two misc-next in one.
drm-misc-next for v6.10-rc1:
The deal of a lifetime! You get ALL of the previous
drm-misc-next-2024-03-21-1 tag!!
But WAIT, there's MORE!
Cross-subsystem Changes:
- Assorted DT binding updates.
Core Changes:
- Clarify how optional wait_hpd_asserted is.
- Shuffle Kconfig names around.
Driver Changes:
- Assorted build fixes for panthor, imagination,
- Add AUO B120XAN01.0 panels.
- Assorted small fixes to panthor, panfrost.
drm-misc-next for v6.10:
UAPI Changes:
- Move some nouveau magic constants to uapi.
Cross-subsystem Changes:
- Move drm-misc to gitlab and freedesktop hosting.
- Add entries for panfrost.
Core Changes:
- Improve placement for TTM bo's in idle/busy handling.
- Improve drm/bridge init ordering.
- Add CONFIG_DRM_WERROR, and use W=1 for drm.
- Assorted documentation updates.
- Make more (drm and driver) headers self-contained and add header
guards.
- Grab reservation lock in pin/unpin callbacks.
- Fix reservation lock handling for vmap.
- Add edp and edid panel matching, use it to fix a nearly identical
panel.
Driver Changes:
- Add drm/panthor driver and assorted fixes.
- Assorted small fixes to xlnx, panel-edp, tidss, ci, nouveau,
panel and bridge drivers.
- Add Samsung s6e3fa7, BOE NT116WHM-N44, CMN N116BCA-EA1,
CrystalClear CMT430B19N00, Startek KD050HDFIA020-C020A,
powertip PH128800T006-ZHC01 panels.
- Fix console for omapdrm.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bea310a6-6ff6-477e-9363-f9f053cfd12a@linux.intel.com
The topology type is an index (not a mask) so define the values
like other indexes instead of using powers of 2. This is also
to make clear that the next type can use value 3. This commit
does not change the existing values so it does not break
compatibility.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/intel-xe/20240327232317.GI718896@mdroper-desk1.amr.corp.intel.com/
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328140243.7-1-francois.dugast@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync in
unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0,
BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to
XE_CACHE_UC to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support
-----BEGIN PGP SIGNATURE-----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=WLj9
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights are usual, more AMD IP blocks for future hw, i915/xe
changes, Displayport tunnelling support for i915, msm YUV over DP
changes, new tests for ttm, but its mostly a lot of stuff all over the
place from lots of people.
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync
in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by
hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support"
* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
drm/amd/pm: wait for completion of the EnableGfxImu message
drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
drm/amdgpu: add smu 14.0.1 support
drm/amdgpu: add VPE 6.1.1 discovery support
drm/amdgpu/vpe: add VPE 6.1.1 support
drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
drm/amdgpu/vpe: add collaborate mode support for VPE
drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
drm/amdgpu/vpe: add multi instance VPE support
drm/amdgpu/discovery: add nbif v6_3_1 ip block
drm/amdgpu: Add nbif v6_3_1 ip block support
drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
arch/powerpc: Remove <linux/fb.h> from backlight code
macintosh/via-pmu-backlight: Include <linux/backlight.h>
fbdev/chipsfb: Include <linux/backlight.h>
drm/etnaviv: Restore some id values
drm/amdkfd: make kfd_class constant
drm/amdgpu: add ring timeout information in devcoredump
...
For modern platforms (MTL and later), both kernel and userspace drivers
are expected to apply GT programming and workarounds based on the IP
version and stepping self-reported by the GT hardware via the GMD_ID
registers. Since userspace drivers can't access these registers
directly, pass along the version and stepping information via the GT
list query. Note that the new query fields will remain 0's when running
on pre-GMD_ID platforms. Userspace is expected to continue using PCI
devid / revid on those older platforms.
Although the hardware also has a GMD_ID register for display
version/stepping, that value is intentionally *not* included anywhere in
the Xe uapi. Display userspace should be using platform-agnostic APIs
and auto-detecting platform capabilities rather than matching specific
IP versions.
v2:
- s/revid/rev/ (Lucas)
- Fix kerneldoc copy/paste mistakes
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312211229.2871288-4-matthew.d.roper@intel.com
Backmerging to get the latest fixes from drm-next; specifically the
build fix from the patchset at [1]. Also fixes the build by removing
an unused variable from rzg2l_du_vsp_atomic_flush().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/130720/ # 1
- enhancements for NPU and MRT support
-----BEGIN PGP SIGNATURE-----
iQFLBAABCAA1FiEEz9DmVLy+XdLQMNIiz8wpfG0KEgsFAmXpksIXHGwuc3RhY2hA
cGVuZ3V0cm9uaXguZGUACgkQz8wpfG0KEgterAgAnvMM2QRG0qUXHmUJAqwQorU0
tErsfxsGrSnsQU2sCqN+D1GUqbIwvNUXX3xvj8r7LKCxkFzC+c7/rcKOHUHDsgOU
WvsDkJOJkx7In2NsiPSYOzUiyRpMwKa2MdFq6GdLB6ZT63GomK+rwL5/9+b23z8P
NbvI0zNMbZnWDpGnHcdTWCmkVd/sLtAnOa7MMqwR9r2RzdsP9ssDpSFXDPfViVxp
c8E6a11mhW+rI3KDRvGpQDRhd+7pDYS9+75aeAsDOhhiJCNVEUGnIyL71fb1FzDJ
oFypU2lNKEdLPUcdSOJSyhC98yupcmQ1j9lWzfqcGcpt8kfl1MlWTwj98hiRfw==
=3Frs
-----END PGP SIGNATURE-----
Merge tag 'drm-etnaviv-next-2024-03-07' of https://git.pengutronix.de/git/lst/linux into drm-next
- various code cleanups
- enhancements for NPU and MRT support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/72a783cd98d60f6ebb43b90a6b453eea87224409.camel@pengutronix.de
Allow user to provide a low latency context hint. When set, KMD
sends a hint to GuC which results in special handling for this
context. SLPC will ramp the GT frequency aggressively every time
it switches to this context. The down freq threshold will also be
lower so GuC will ramp down the GT freq for this context more slowly.
We also disable waitboost for this context as that will interfere with
the strategy.
We need to enable the use of SLPC Compute strategy during init, but
it will apply only to contexts that set this bit during context
creation.
Userland can check whether this feature is supported using a new param-
I915_PARAM_HAS_CONTEXT_FREQ_HINT. This flag is true for all guc submission
enabled platforms as they use SLPC for frequency management.
The Mesa usage model for this flag is here -
https://gitlab.freedesktop.org/sushmave/mesa/-/commits/compute_hint
v2: Rename flags as per review suggestions (Rodrigo, Tvrtko).
Also, use flag bits in intel_context as it allows finer control for
toggling per engine if needed (Tvrtko).
v3: Minor review comments (Tvrtko)
v4: Update comment (Sushma)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ivan Briano <ivan.briano@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306012759.204938-1-vinay.belgaumkar@intel.com
Panthor follows the lead of other recently submitted drivers with
ioctls allowing us to support modern Vulkan features, like sparse memory
binding:
- Pretty standard GEM management ioctls (BO_CREATE and BO_MMAP_OFFSET),
with the 'exclusive-VM' bit to speed-up BO reservation on job submission
- VM management ioctls (VM_CREATE, VM_DESTROY and VM_BIND). The VM_BIND
ioctl is loosely based on the Xe model, and can handle both
asynchronous and synchronous requests
- GPU execution context creation/destruction, tiler heap context creation
and job submission. Those ioctls reflect how the hardware/scheduler
works and are thus driver specific.
We also have a way to expose IO regions, such that the usermode driver
can directly access specific/well-isolate registers, like the
LATEST_FLUSH register used to implement cache-flush reduction.
This uAPI intentionally keeps usermode queues out of the scope, which
explains why doorbell registers and command stream ring-buffers are not
directly exposed to userspace.
v6:
- Add Maxime's and Heiko's acks
v5:
- Fix typo
- Add Liviu's R-b
v4:
- Add a VM_GET_STATE ioctl
- Fix doc
- Expose the CORE_FEATURES register so we can deal with variants in the
UMD
- Add Steve's R-b
v3:
- Add the concept of sync-only VM operation
- Fix support for 32-bit userspace
- Rework drm_panthor_vm_create to pass the user VA size instead of
the kernel VA size (suggested by Robin Murphy)
- Typo fixes
- Explicitly cast enums with top bit set to avoid compiler warnings in
-pedantic mode.
- Drop property core_group_count as it can be easily calculated by the
number of bits set in l2_present.
Co-developed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229162230.2634044-2-boris.brezillon@collabora.com
- A couple of tracepoint updates from Priyanka and Lucas.
- Make sure BINDs are completed before accepting UNBINDs on LR vms.
- Don't arbitrarily restrict max number of batched binds.
- Add uapi for dumpable bos (agreed on IRC).
- Remove unused uapi flags and a leftover comment.
Driver Changes:
- A couple of fixes related to the execlist backend.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZeB/nAAKCRC4FpNVCsYG
vwU8AQCD3be2p5O/SQ5btePtB1yFv3KgL1mGir7LTuvWj7VeegEAw0+7iZe+Uscp
XUAWl6AQQyXWxHXd4BcBAa56exMljwo=
=Y4LX
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-02-29' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- A couple of tracepoint updates from Priyanka and Lucas.
- Make sure BINDs are completed before accepting UNBINDs on LR vms.
- Don't arbitrarily restrict max number of batched binds.
- Add uapi for dumpable bos (agreed on IRC).
- Remove unused uapi flags and a leftover comment.
Driver Changes:
- A couple of fixes related to the execlist backend.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZeCBg4MA2hd1oggN@fedora
Those cases missed in previous uAPI cleanups were mostly accidentally
brought in from i915 or created to exercise the possibilities of gpuvm
but they are not used by userspace yet, so let's remove them. They can
still be brought back later if needed.
v2:
- Fix XE_VM_FLAG_FAULT_MODE support in xe_lrc.c (Brian Welty)
- Leave DRM_XE_VM_BIND_OP_UNMAP_ALL (José Roberto de Souza)
- Ensure invalid flag values are rejected (Rodrigo Vivi)
v3: Rebase after removal of persistent exec_queues (Francois Dugast)
v4: Rodrigo: Rebase after the new dumpable flag.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222232356.175431-1-rodrigo.vivi@intel.com
(cherry picked from commit 84a1ed5e67)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
This is a comment left over of commit d3d767396a
("drm/xe/uapi: Remove sync binds").
Fixes: d3d767396a ("drm/xe/uapi: Remove sync binds")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226172321.61518-1-jose.souza@intel.com
(cherry picked from commit f031c3a7af)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that this
mapping should be dumped.
This is not hooked up, but the uapi should be ready before merging.
It's likely easier to dump the contents of the bo's at devcoredump
readout time, so it's better if the bos will stay unmodified after
a hang. The NEEDS_CPU_MAPPING flag is removed as requirement.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-3-maarten.lankhorst@linux.intel.com
(cherry picked from commit 76a86b58d2)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The infrastructure to query GuC firmware version is already in place. It
is extended with a new micro-controller type to query the HuC firmware
version. It can be used from user space to know if HuC is running.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208183539.185095-2-jose.souza@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXb0T4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5YQH/3eCV90sNGch0Y94
8rtTdqFrVx7QPNl0pz+Mo6OUIKUUHvTuwime16ckLxG+3x2Y3I0MjP1edd1NB99C
Kje//JTpaZBPpTZ/jY4u8B1Shov2Drdx/J4NFnE/9rG6yXzKQBtvON/xAxXDCVHT
mLhst2LR0FeCSMk9jAX6CoqUPEgwlylNyAetKxaDQgoHl4GTZC7FDO17WxyjpIxe
1rVHsrV9Eq8kD4uxrzpTYWgZrwTObPmlZjvefa1JfzSwRNABIBJj/C1nra1Zc1oi
b7xVaXS1cMOxrtuuG00fmHsPnWivu0tuND7H3/yLd1mRCZAPSsVbVvrI/KNtoeV4
1euINlY=
=7IFt
-----END PGP SIGNATURE-----
Merge v6.8-rc6 into drm-next
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Those cases missed in previous uAPI cleanups were mostly accidentally
brought in from i915 or created to exercise the possibilities of gpuvm
but they are not used by userspace yet, so let's remove them. They can
still be brought back later if needed.
v2:
- Fix XE_VM_FLAG_FAULT_MODE support in xe_lrc.c (Brian Welty)
- Leave DRM_XE_VM_BIND_OP_UNMAP_ALL (José Roberto de Souza)
- Ensure invalid flag values are rejected (Rodrigo Vivi)
v3: Rebase after removal of persistent exec_queues (Francois Dugast)
v4: Rodrigo: Rebase after the new dumpable flag.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222232356.175431-1-rodrigo.vivi@intel.com
This reports the currently used vram allocations.
userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This returns the BAR resources size so userspace can make
decisions based on rebar support.
userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that this
mapping should be dumped.
This is not hooked up, but the uapi should be ready before merging.
It's likely easier to dump the contents of the bo's at devcoredump
readout time, so it's better if the bos will stay unmodified after
a hang. The NEEDS_CPU_MAPPING flag is removed as requirement.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-3-maarten.lankhorst@linux.intel.com
Persistent exec_queues delays explicit destruction of exec_queues
until they are done executing, but destruction on process exit
is still immediate. It turns out no UMD is relying on this
functionality, so remove it. If there turns out to be a use-case
in the future, let's re-add.
Persistent exec_queues were never used for LR VMs
v2:
- Don't add an "UNUSED" define for the missing property
(Lucas, Rodrigo)
v3:
- Remove the remaining struct xe_exec_queue::persistent state
(Niranjana, Lucas)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209113444.8396-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit f1a9abc0cf)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Bring changes from drm-misc-next that got merged in drm-next back to
drm-xe so they can be used for additional features.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tooling appears very strict so lets pacify it by adding some comments,
even if fields are completely self-explanatory.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: b112364867 ("drm/i915: Add GuC submission interface version query")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jose Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219132517.1868604-1-tvrtko.ursulin@linux.intel.com
Persistent exec_queues delays explicit destruction of exec_queues
until they are done executing, but destruction on process exit
is still immediate. It turns out no UMD is relying on this
functionality, so remove it. If there turns out to be a use-case
in the future, let's re-add.
Persistent exec_queues were never used for LR VMs
v2:
- Don't add an "UNUSED" define for the missing property
(Lucas, Rodrigo)
v3:
- Remove the remaining struct xe_exec_queue::persistent state
(Niranjana, Lucas)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209113444.8396-1-thomas.hellstrom@linux.intel.com
Add a new query to the GuC submission interface version.
Mesa intends to use this information to check for old firmware versions
with a known bug where using the render and compute command streamers
simultaneously can cause GPU hangs due issues in firmware scheduling.
Based on patches from Vivaik and Joonas.
Compile tested only.
v2:
* Added branch version.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208082510.1363268-1-tvrtko.ursulin@linux.intel.com
Due to a bug in GuC firmware, Mesa can't enable by default the usage of
compute engines in DG2 and newer.
A new GuC firmware fixed the issue but until now there was no way
for Mesa to know if KMD was running with the fixed GuC version or not,
so this uAPI is required.
It may be expanded in future to query other firmware versions too.
This is querying XE_UC_FW_VER_COMPATIBILITY/submission version because
that is also supported by VFs, while XE_UC_FW_VER_RELEASE don't.
i915 uAPI: https://patchwork.freedesktop.org/series/129627/
Mesa usage: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25233
v2:
- fixed drm_xe_query_uc_fw_version documentation
- moved branch_ver as the first version number
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208183539.185095-1-jose.souza@intel.com
Backmerging to update drm-misc-next to the state of v6.8-rc3. Also
fixes a build problem with xe.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Add DRM_IVPU_JOB_STATUS_ABORTED to indicate that the job was aborted
by the driver due to e.g. TDR or user context MMU faults.
This will help UMD and tests distinguish if job was aborted by the FW
or the driver.
Signed-off-by: Grzegorz Trzebiatowski <grzegorz.trzebiatowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-8-jacek.lawrynowicz@linux.intel.com
There is no real need to have a separate pool for shareable and
non-shareable surfaces. Make all surfaces shareable, regardless of whether
the drm_vmw_surface_flag_shareable has been specified.
Signed-off-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126200804.732454-3-zack.rusin@broadcom.com
These ones will be needed to make use fo the NN and TP units in the NPUs
based on Vivante IP.
Also fix the number of NN cores in the VIPNano-qi.
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Acked-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
DRM_IVPU_PARAM_CONTEXT_PRIORITY has been deprecated because it
has been replaced with DRM_IVPU_JOB_PRIORITY levels set with
submit IOCTL and was unused anyway.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-10-jacek.lawrynowicz@linux.intel.com
Some chips provide both average and input power. Previously
we just exposed average power, add a new query for input
power.
Example userspace:
https://github.com/Umio-Yasuno/libdrm-amdgpu-sys-rs/tree/input_power
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As of commit b77fdd6a48 ("scripts/kernel-doc: restore warning for
Excess struct/union"), we see the following warnings when running 'make
htmldocs':
./include/uapi/drm/nouveau_drm.h:292: warning: Excess struct member 'DRM_NOUVEAU_VM_BIND_OP_MAP' description in 'drm_nouveau_vm_bind_op'
./include/uapi/drm/nouveau_drm.h:292: warning: Excess struct member 'DRM_NOUVEAU_VM_BIND_OP_UNMAP' description in 'drm_nouveau_vm_bind_op'
./include/uapi/drm/nouveau_drm.h:292: warning: Excess struct member 'DRM_NOUVEAU_VM_BIND_SPARSE' description in 'drm_nouveau_vm_bind_op'
./include/uapi/drm/nouveau_drm.h:336: warning: Excess struct member 'DRM_NOUVEAU_VM_BIND_RUN_ASYNC' description in 'drm_nouveau_vm_bind'
The problem is that these values are #define constants, but had kerneldoc
comments attached to them as if they were actual struct members.
There are a number of ways we could fix this, but I chose to draw
inspiration from include/uapi/drm/i915_drm.h, which pulls them into the
corresponding kerneldoc comment for the struct member that they are
intended to be used with.
To keep the diff readable, there are a number of things I _didn't_ do in
this patch, but which we should also consider:
- This is pretty good documentation, but it ends up in gpu/driver-uapi,
which is part of subsystem-apis/ when it really ought to display under
userspace-api/ (the "Linux kernel user-space API guide" book of the
documentation).
- More generally, we might want a warning if include/uapi/ files are
kerneldoc'd outside userspace-api/.
- I'd consider it cleaner if the #defines appeared between the kerneldoc
for the member and the member itself (which is something other DRM-
related UAPI docs do).
- The %IDENTIFIER kerneldoc syntax is intended for "constants", and is
more appropriate in this context than ``IDENTIFIER`` or &IDENTIFIER.
The DRM docs aren't very consistent on this.
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231225065145.3060754-1-vegard.nossum@oracle.com
This is a comment left over of commit d3d767396a
("drm/xe/uapi: Remove sync binds").
Fixes: d3d767396a ("drm/xe/uapi: Remove sync binds")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
The notable changes are:
- uAPI changes:
- Add sysfs entry to allow users to identify a device minor id with its
debugfs path
- Add sysfs entry to expose the device's module id as given to us from
the f/w
- Add signed device information retrieval through the INFO ioctl
- New features and improvements:
- Update documentation of debugfs paths
- Add support for Gaudi2C device (new PCI revision number)
- Add pcie reset prepare/done hooks
- Firmware related fixes and changes:
- Print three instances version numbers of Infineon second stage
- Assume hard-reset is done by f/w upon PCIe AXI drain
- Bug fixes and code cleanups:
- Fix information leak in sec_attest_info()
- Avoid overriding existing undefined opcode data in Gaudi2
- Multiple Queue Manager (QMAN) fixes for Gaudi2
- Set hard reset flag if graceful reset is skipped
- Remove 'get temperature' debug print
- Fix the new Event Queue heartbeat mechanism
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmWBaF8ACgkQZR1NuKta
54ATiAf/flp2gakFbG18e/IAyroSE1c6ZEV07l9vuYF8VCSuC77YVKdkU+QwwwQt
h09gj46zsS/NX4QnBkUyZPnqsR/QoW2XpMABT89JuohCwDM7BNo2MUCRAFiNrH32
T3DjgJuLdk4cuohy7aD1mT0I/BsoCIQzJlojdOH7y3K2eNJD82wNVVjmjA1cfyVk
vKgZXT96o6mgPIA4cNcHjuYd5H9dE8z1vatq6a1JwVZM4FDWXLV1IxKJFOXTRUs9
30v0cNATkHbWMWI2N5bX+AK/GOuWvKaW8+NMmIjXaaHWS88tFFn2MKbAvxIChENd
w1ondDyZqxjAXFvLaJhpKcTG2m3BxA==
=YhxU
-----END PGP SIGNATURE-----
Merge tag 'drm-habanalabs-next-2023-12-19' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver changes for v6.8.
The notable changes are:
- uAPI changes:
- Add sysfs entry to allow users to identify a device minor id with its
debugfs path
- Add sysfs entry to expose the device's module id as given to us from
the f/w
- Add signed device information retrieval through the INFO ioctl
- New features and improvements:
- Update documentation of debugfs paths
- Add support for Gaudi2C device (new PCI revision number)
- Add pcie reset prepare/done hooks
- Firmware related fixes and changes:
- Print three instances version numbers of Infineon second stage
- Assume hard-reset is done by f/w upon PCIe AXI drain
- Bug fixes and code cleanups:
- Fix information leak in sec_attest_info()
- Avoid overriding existing undefined opcode data in Gaudi2
- Multiple Queue Manager (QMAN) fixes for Gaudi2
- Set hard reset flag if graceful reset is skipped
- Remove 'get temperature' debug print
- Fix the new Event Queue heartbeat mechanism
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZYFpihZscr/fsRRd@ogabbay-vm-u22.habana-labs.com
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms. The experimental support starts with Tiger Lake.
i915 will continue be the main production driver for the platforms
up to Meteor Lake and Alchemist. Then the goal is to make this Intel
Xe driver the primary driver for Lunar Lake and newer platforms.
It uses most, if not all, of the key drm concepts, in special: TTM,
drm-scheduler, drm-exec, drm-gpuvm/gpuva and others.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmWErlkACgkQ+mJfZA7r
E8ptAQf/UILUy63usqMBQx5gGTJ5e6oyGy0r97JdBBWNxhcu3/4uN1SR6V2LSV7p
mnZt/LrHZ/24s73e5D7sh909GCYm/MMWH7v0KypJq5Z74BHb9IePP7+Q4NTfXfqS
5AotYxDEwPBQZpfYLA7y17XrB01yz/gF8wHytBFTPiPOlve7BDAYw4j8o+ocztxy
sLLwPi7A6RJJlpXaDa33DpH5MLpTVYUOuxaIElqu949AJj/Me+LHd26VfoGWt9YT
AWzAm+LLoBhyE5lk9swWxvphGvNoOuKf8soTMEVXr4qxsR6d4LShkrljSYSbtRhl
2QZMgvSL4pGkB3Yvfxb0hidWuVMNfA==
=bubx
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2023-12-21-pr1-1' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Introduce a new DRM driver for Intel GPUs
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms. The experimental support starts with Tiger Lake.
i915 will continue be the main production driver for the platforms
up to Meteor Lake and Alchemist. Then the goal is to make this Intel
Xe driver the primary driver for Lunar Lake and newer platforms.
It uses most, if not all, of the key drm concepts, in special: TTM,
drm-scheduler, drm-exec, drm-gpuvm/gpuva and others.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: add an extra X86 check, fix a typo, fix drm_exec_init interface
change].
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZYSwLgXZUZ57qGPQ@intel.com
This kernel uevent is getting removed for now. It will come
back later with a better future proof name.
v2: Rebase (Francois Dugast)
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Bring those defines close to the context where they can be used. Also
apply indentation as it is done for other subsets of defines.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Move those defines to align on the rule used elsewhere in the file which
was introduced by commit 4f082f2c3a ("drm/xe: Move defines before
relevant fields").
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Complete the documentation of some structs by adding functional
examples of user space code. Those examples are intentionally kept
very simple. Put together, they provide a foundation for a minimal
application that executes a job using the Xe driver.
v2: Remove use of DRM_XE_VM_BIND_FLAG_ASYNC (Francois Dugast)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In order to make proper use the uAPI, a prerequisite is to understand
some key concepts about the discrete GPU devices which are supported
by the Xe driver. For example, some structs defined in the uAPI are an
abstraction of a hardware component with a specific role.
This diagram helps to build a mental representation of a device how it
is seen by the Xe driver. As written in the documentation, it does not
intend to be a literal representation of an existing device. A lot
more information could be added but the intention for the overview is
to keep it simple, and go into detail as needed in other sections.
v2: Add GT1 inside Tile0 (José Roberto de Souza)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The uAPI should stay generic in regarding to the bitmask. It is
the userspace responsibility to check for the type/class of the
memory, without any assumption.
Also add comments inside the code to explain how it is actually
constructed so we don't accidentally change the assignment of
the instance and the masks.
No functional change in this patch. It only explains and document
the memory_region masks. A further follow-up work with the
organization of all memory regions around struct xe_mem_regions
is desired, but not part of this patch.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
No functional change in this patch.
Let's ensure all of our structs are documented and with a certain
standard. Also, let's have an overview and list of IOCTLs as the
very beginning of the generated HTML doc.
v2: Nits (Lucas De Marchi)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
This patch doesn't modify any text or uapi entries themselves.
It only move things up and down aiming a better organization of the uAPI.
While fixing the documentation I noticed that query_engine_cs_cycles
was in the middle of the memory_region info. Then I noticed more
mismatches on the order when compared to the order of the IOCTL
and QUERY entries declaration. So this patch aims to bring some
order to the uAPI so it gets easier to read and the documentation
generated in the end is able to tell a consistent story.
Overall order:
1. IOCTL definition
2. Extension definition and helper structs
3. IOCTL's Query structs in the order of the Query's entries.
4. The rest of IOCTL structs in the order of IOCTL declaration.
5. uEvents
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
As there is no direct way to make comments of constants directly
visible in the kernel doc, move them to the description of the
structure where they can be used. By doing so they appear in the
"Description" section of the struct documentation.
v2: Remove DRM_XE_UFENCE_WAIT_MASK_* (Francois Dugast)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a documentation on the content and format of when using query type
DRM_XE_DEVICE_QUERY_HWCONFIG. The list of keys can be found in IGT
under lib/intel_hwconfig_types.h.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Provide a description of the keys used the struct
drm_xe_query_config info array.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/637
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Document the behavior of the driver for IOCTL DRM_IOCTL_XE_DEVICE_QUERY
depending on the size value provided in struct drm_xe_device_query.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This removes the documentation build warnings below:
include/uapi/drm/xe_drm.h:828: warning: Function parameter or \
member 'pad2' not described in 'drm_xe_vm_bind_op'
include/uapi/drm/xe_drm.h:875: warning: Function parameter or \
member 'pad2' not described in 'drm_xe_vm_bind'
include/uapi/drm/xe_drm.h:1006: warning: Function parameter or \
member 'handle' not described in 'drm_xe_sync'
include/uapi/drm/xe_drm.h:1006: warning: Function parameter or \
member 'timeline_value' not described in 'drm_xe_sync'
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a comment to each struct to complete documentation, ensure all
struct appear in the kernel doc, and bind structs to IOCTLs.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove concept of async vs sync VM bind queues, rather make all binds
async.
The following bits have dropped from the uAPI:
DRM_XE_ENGINE_CLASS_VM_BIND_ASYNC
DRM_XE_ENGINE_CLASS_VM_BIND_SYNC
DRM_XE_VM_CREATE_FLAG_ASYNC_DEFAULT
DRM_XE_VM_BIND_FLAG_ASYNC
To implement sync binds the UMD is expected to use the out-fence
interface.
v2: Send correct version
v3: Drop drm_xe_syncs
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
To ensure consistency and avoid possible later conflicts,
let's add drm_xe prefix to xe_user_extension struct.
Cc: Francois Dugast <francois.dugast@intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
PMU uapi is likely to change in the future. Till the uapi is finalized,
remove PMU from Xe. PMU can be re-added after uapi is finalized.
v2: Include xe_drm.h in xe/tests/xe_dma_buf.c (Francois)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Those are just possible values for the comparison mask but they are not
specific magic values. Let's keep them as examples in the documentation
but remove them from the uAPI.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The exec_queue_set_property feature was removed in a previous
commit 0f1d88f278 ("drm/xe/uapi: Kill exec_queue_set_property") and
is no longer usable, struct drm_xe_exec_queue_set_property does not
exist anymore, so let's remove this.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
remove the num_engines/instances members from drm_xe_wait_user_fence
structure and add a exec_queue_id member
Right now this is only checking if the engine list is sane and nothing
else. In the end every operation with this IOCTL is a soft check.
So, let's formalize that and only use this IOCTL to wait on the fence.
exec_queue_id member will help to user space to get proper error code
from kernel while in exec_queue reset
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
All the properties should be immutable and set upon exec_queue creation
using the existent extension. So, let's kill this useless and dangerous
uapi.
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
The vm_create ioctl function doesn't accept any extension.
Remove this left over.
A backward compatible change.
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Currently we're using "compute mode" for long running VMs using
preempt-fences for memory management, and "fault mode" for long
running VMs using page faults.
Change this to use the terminology "long-running" abbreviated as LR for
long-running VMs. These VMs can then either be in preempt-fence mode or
fault mode. The user can force fault mode at creation time, but otherwise
the driver can choose to use fault- or preempt-fence mode for long-running
vms depending on the device capabilities. Initially unless fault-mode is
specified, the driver uses preempt-fence mode.
v2:
- Fix commit message wording and the documentation around
CREATE_FLAG_LR_MODE and CREATE_FLAG_FAULT_MODE
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Although the exec ioctl is a very important one, it makes no sense
to explain xe_exec before explaining the exec_queue. So, let's
move this down to help bring a better flow on the documentation
and code readability.
It is important to highlight that this patch is changing all
the ioctl numbers in a non-backward compatible way. However, we
are doing this final uapi clean-up before we submit our first
pull-request to be part of the upstream Kernel. Once we get
there, no other change like this will ever happen and all the
backward compatibility will be respected.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Let's respect Documentation/process/botching-up-ioctls.rst
and add the proper padding for a 64b alignment with all as
well as all the required checks and settings for the pads
and the reserved entries.
v2: Fix remaining holes and double check with pahole (Jose)
Ensure with pahole that both 32b and 64b have exact same
layout (Thomas)
Do not set query's pad and reserved bits to zero since it
is redundant and already done by kzalloc (Matt)
v3: Fix alignment after rebase (José Roberto de Souza)
v4: Fix pad check (Francois Dugast)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
As an information only. So Userspace can use this information
and be able to correlate different GTs.
Make API symmetric between Engine and GT info.
There's no need right now to include a tile_query entry
since there's no other information that we need from tile
that is not already exposed through different queries.
However, this could be added later if we have different Tile
information that could matter to userspace. But let's keep
the API ready for a direct reference to Tile ID based on
the GT entry.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
First of all, let's remove the duplication.
But also, let's rename it to remove the word 'frequency'
out of it. In general, the first thing people think of frequency
is the frequency in which the GTs are operating to execute the
GPU instructions.
While this frequency here is a crystal reference clock frequency
which is the base of everything else, and in this case of this
uAPI it is used to calculate a better and precise timestamp.
v2: (Suggested by Jose) Remove the engine_cs and keep the GT info one
since it might be useful for other SRIOV cases where the engine_cs
will be zeroed. So, grabbing from the GT_LIST should be cleaner.
v3: Keep comment on put_user() call (José Roberto de Souza)
Cc: Matt Roper <matthew.d.roper@intel.com>
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
It is currently unused, so by the rules it cannot go upstream.
Also there was the desire to convert that to align with the
engine_class_instance selection, but the consensus on that one
is to remain with the global gt_id. So we are keeping the gt_id
there, not converting to a generic sched_group and also killing
this tile_mask and only using the default behavior of 0 that is
to create a mapping / page_table entry on every tile, similar
to what i915.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Let's continue on the uapi clean-up with more splits
with stuff into their own exclusive fields instead of
reusing stuff.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The uAPI provides queries which return arrays of elements. As of now
the format used in the struct is different depending on which element
is queried. Fix this for engines by applying the pattern below:
struct drm_xe_query_Xs {
__u32 num_Xs;
struct drm_xe_X Xs[];
...
}
Instead of directly returning an array of struct
drm_xe_query_engine_info, a new struct drm_xe_query_engines is
introduced. It contains itself an array of struct drm_xe_engine
which holds the information about each engine.
v2: Use plural for struct drm_xe_query_engines as multiple engines
are returned (José Roberto de Souza)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The uAPI provides queries which return arrays of elements. As of now
the format used in the struct is different depending on which element
is queried. However, aligning on the new common pattern:
struct drm_xe_query_Xs {
__u32 num_Xs;
struct drm_xe_X Xs[];
...
}
... would mean bringing back the name "gts" which is avoided per commit
fca54ba12470 ("drm/xe/uapi: Rename gts to gt_list") so make an exception
for gt and leave gt_list. Also, this change removes "query" in the
name of struct drm_xe_query_gt as it is not returned from the query
IOCTL. There is no functional change.
v2: Leave gt_list (Matt Roper)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The uAPI provides queries which return arrays of elements. As of now
the format used in the struct is different depending on which element
is queried. Fix this for memory regions by applying the pattern below:
struct drm_xe_query_Xs {
__u32 num_Xs;
struct drm_xe_X Xs[];
...
}
This removes "query" in the name of struct drm_xe_query_mem_region
as it is not returned from the query IOCTL. There is no functional
change.
v2: Only rename drm_xe_query_mem_region to drm_xe_mem_region
(José Roberto de Souza)
v3: Rename usage to mem_regions in xe_query.c (José Roberto de Souza)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For xe bo creation we request passing size which matches system or
vram minimum page alignment. This way we want to ensure userspace
is aware of region constraints and not aligned allocations will be
rejected returning EINVAL.
v2:
- Rebase, Update uAPI documentation. (Thomas)
v3:
- Adjust the dma-buf kunit test accordingly. (Thomas)
v4:
- Fixed rebase conflicts and updated commit message. (Francois)
Signed-off-by: Mauro Carvalho Chehab <mauro.chehab@linux.intel.com>
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We have at least 2 future features(OA and future media engines
capabilities) that will require Xe to provide more information about
engines to UMDs.
But this information should not just be added to
drm_xe_engine_class_instance for a couple of reasons:
- drm_xe_engine_class_instance is used as input to other structs/uAPIs
and those uAPIs don't care about any of these future new engine fields
- those new fields are useless information after initialization for
some UMDs, so it should not need to carry that around
So here my proposal is to make DRM_XE_DEVICE_QUERY_ENGINES return an
array of drm_xe_query_engine_info that contain
drm_xe_engine_class_instance and 3 u64s to be used for future features.
Reference OA:
https://patchwork.freedesktop.org/patch/558362/?series=121084&rev=6
v2: Reduce reserved[] to 3 u64 (Matthew Brost)
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo Rebased]
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Although the flags are about the creation, the memory placement
of the BO deserves a proper dedicated field in the uapi.
Besides getting more clear, it also allows to remove the
'magic' shifts from the flags that was a concern during the
uapi reviews.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The bind api is extensible but for a single bind op, there
is not a mechanism to extend. Add extensions field to
struct drm_xe_vm_bind_op.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Dominik Grzegorzek <dominik.grzegorzek@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Allow userspace to directly control the pat_index for a given vm
binding. This should allow directly controlling the coherency, caching
behaviour, compression and potentially other stuff in the future for the
ppGTT binding.
The exact meaning behind the pat_index is very platform specific (see
BSpec or PRMs) but effectively maps to some predefined memory
attributes. From the KMD pov we only care about the coherency that is
provided by the pat_index, which falls into either NONE, 1WAY or 2WAY.
The vm_bind coherency mode for the given pat_index needs to be at least
1way coherent when using cpu_caching with DRM_XE_GEM_CPU_CACHING_WB. For
platforms that lack the explicit coherency mode attribute, we treat
UC/WT/WC as NONE and WB as AT_LEAST_1WAY.
For userptr mappings we lack a corresponding gem object, so the expected
coherency mode is instead implicit and must fall into either 1WAY or
2WAY. Trying to use NONE will be rejected by the kernel. For imported
dma-buf (from a different device) the coherency mode is also implicit
and must also be either 1WAY or 2WAY.
v2:
- Undefined coh_mode(pat_index) can now be treated as programmer
error. (Matt Roper)
- We now allow gem_create.coh_mode <= coh_mode(pat_index), rather than
having to match exactly. This ensures imported dma-buf can always
just use 1way (or even 2way), now that we also bundle 1way/2way into
at_least_1way. We still require 1way/2way for external dma-buf, but
the policy can now be the same for self-import, if desired.
- Use u16 for pat_index in uapi. u32 is massive overkill. (José)
- Move as much of the pat_index validation as we can into
vm_bind_ioctl_check_args. (José)
v3 (Matt Roper):
- Split the pte_encode() refactoring into separate patch.
v4:
- Rebase
v5:
- Check for and reject !coh_mode which would indicate hw reserved
pat_index on xe2.
v6:
- Rebase on removal of coh_mode from uapi. We just need to reject
cpu_caching=wb + pat_index with coh_none.
Testcase: igt@xe_pat
Bspec: 45101, 44235 #xe
Bspec: 70552, 71582, 59400 #xe2
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Pallavi Mishra <pallavi.mishra@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Filip Hazubski <filip.hazubski@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Cc: Zhengguo Xu <zhengguo.xu@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Zhengguo Xu <zhengguo.xu@intel.com>
Acked-by: Bartosz Dunajski <bartosz.dunajski@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Allow userspace to specify the CPU caching mode at object creation.
Modify gem create handler and introduce xe_bo_create_user to replace
xe_bo_create. In a later patch we will support setting the pat_index as
part of vm_bind, where expectation is that the coherency mode extracted
from the pat_index must be least 1way coherent if using cpu_caching=wb.
v2
- s/smem_caching/smem_cpu_caching/ and
s/XE_GEM_CACHING/XE_GEM_CPU_CACHING/. (Matt Roper)
- Drop COH_2WAY and just use COH_NONE + COH_AT_LEAST_1WAY; KMD mostly
just cares that zeroing/swap-in can't be bypassed with the given
smem_caching mode. (Matt Roper)
- Fix broken range check for coh_mode and smem_cpu_caching and also
don't use constant value, but the already defined macros. (José)
- Prefer switch statement for smem_cpu_caching -> ttm_caching. (José)
- Add note in kernel-doc for dgpu and coherency modes for system
memory. (José)
v3 (José):
- Make sure to reject coh_mode == 0 for VRAM-only.
- Also make sure to actually pass along the (start, end) for
__xe_bo_create_locked.
v4
- Drop UC caching mode. Can be added back if we need it. (Matt Roper)
- s/smem_cpu_caching/cpu_caching. Idea is that VRAM is always WC, but
that is currently implicit and KMD controlled. Make it explicit in
the uapi with the limitation that it currently must be WC. For VRAM
+ SYS objects userspace must now select WC. (José)
- Make sure to initialize bo_flags. (José)
v5
- Make to align with the other uapi and prefix uapi constants with
DRM_ (José)
v6:
- Make it clear that zero cpu_caching is only allowed for kernel
objects. (José)
v7: (Oak)
- With all the changes from the original design, it looks we can
further simplify here and drop the explicit coh_mode. We can just
infer the coh_mode from the cpu_caching. i.e reject cpu_caching=wb +
coh_none. It's one less thing for userspace to maintain so seems
worth it.
v8:
- Make sure to also update the kselftests.
Testcase: igt@xe_mmap@cpu-caching
Signed-off-by: Pallavi Mishra <pallavi.mishra@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Filip Hazubski <filip.hazubski@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Cc: Zhengguo Xu <zhengguo.xu@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Zhengguo Xu <zhengguo.xu@intel.com>
Acked-by: Bartosz Dunajski <bartosz.dunajski@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Let's bring a bit of clarity on this 'region' field that is
part of vm_bind operation struct. Rename and document to make
it more than obvious that it is a region instance and not a
mask and also that it should only be used with the prefetch
operation itself.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
On one hand the WAIT_OP represents the operation use for waiting such
as ==, !=, > and so on. On the other hand, the mask is applied to the
value used for comparision. Split those two to bring clarity to the uapi.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Only cosmetic things. No functional change on this patch.
Define every flag with (1 << n) and use singular FLAG name.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
'Usage' gives an impression of telemetry information where someone
would query to see how the memory is currently used and available
size, etc. However this API is more than this. It is about a global
view of all the memory regions available in the system and user
space needs to have this information so they can then use the
mem_region masks that are returned for the engine access.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
- 'native' doesn't make much sense on integrated devices.
- 'slow' is not necessarily true and doesn't go well with opposition
to 'native'.
Instead, let's use 'near' vs 'far'. It makes sense with all the current
Intel GPUs and it is future proof. Right now, there's absolutely no need
to define among the 'far' memory, which ones are slower, either in terms
of latency, nunmber of hops or bandwidth.
In case of this might become a requirement in the future, a new query
could be added to indicate the certain 'distance' between a given engine
and a memory_region. But for now, this fulfill all of the current
requirements in the most straightforward way for the userspace drivers.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Change rsvd to pad in struct drm_xe_class_instance to prevent the field
from being used in future.
v2: Change from fixup to regular commit because this touches the
uAPI (Francois Dugast)
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Most constants defined in xe_drm.h which can be used for flags are
named DRM_XE_*_FLAG_*, which is helpful to identify them. Make this
systematic and add _FLAG where it was missing.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Most constants defined in xe_drm.h use DRM_XE_ as prefix which is
helpful to identify the name space. Make this systematic and add
this prefix where it was missing.
v2:
- fix vertical alignment of define values
- remove double DRM_ in some variables (José Roberto de Souza)
v3: Rebase
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Drop interrupt event from PMU as that is not useful and not being used
by any UMD.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As part of uAPI cleanup, remove this constant which is not used. Number
of GTs are provided as num_gt in drm_xe_query_gt_list.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As part of uAPI cleanup, remove this constant which is not used. Memory
regions can be queried with DRM_XE_DEVICE_QUERY_MEM_USAGE.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is not used and also the negative of the other 2 regions:
native_mem_regions and slow_mem_regions.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove unused IOCTL.
Without any userspace using it we need to remove before we
can be accepted upstream.
At this point we are breaking the compatibility for good,
so we don't need to break when we are in-tree. So, let's
also use this breakage to sort out the IOCTL entries and
fix all the small indentation and line issues.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
With the split between tile and gt, this is currently unused.
Also it is bringing confusion because main vs remote would be
more a concept of the tile itself and not about GT.
So, the MAIN one is the traditional GT used for every operation
in older platforms, and for render/graphics and compute on platforms
that contains the stand-alone Media GT.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
num_params can be used to retrieve the size of the info array
for the specific version of the kernel being used.
v2: Also remove XE_QUERY_CONFIG_NUM_PARAM (José Roberto de Souza)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add conditional check for access counter granularity.
This check will return -EINVAL if granularity is beyond 64M
which is a hardware limitation.
v2: Defined
XE_ACC_GRANULARITY_128K 0
XE_ACC_GRANULARITY_2M 1
XE_ACC_GRANULARITY_16M 2
XE_ACC_GRANULARITY_64M 3
as part of uAPI.
So, that user can also use it.(Oak)
v3: Move uAPI to proper location and give proper
documentation.(Brian, Oak)
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Janga Rahul Kumar <janga.rahul.kumar@intel.com>
Cc: Brian Welty <brian.welty@intel.com>
Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is used for the priority of an exec queue (not an engine) and
should be named accordingly.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
During the uapi review it was identified a possible confusion
with the plural of acronym with a new acronym. So the
recommendation is to go with gt_list instead.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
We already have many bits reserved at the end already.
Let's kill the unused ones.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Let's have a single GT ID per GT within the PCI Device Card.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Split drm_xe_query_gt out of the gt list one in order to better
document it.
No functional change at this point. Any actual change to the
uapi should come in follow-up additions.
v2: s/maks/mask
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Async worker is gone. All jobs and memory allocations done in IOCTL to
align with dma fencing rules.
Async vs. sync now means when do bind operations complete relative to
the IOCTL. Async completes when out-syncs signal while sync completes
when the IOCTL returns. In-syncs and out-syncs are only allowed in async
mode.
If memory allocations fail in the job creation step the VM is killed.
This is temporary, eventually a proper unwind will be done and VM will
be usable.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is not used nor does it align VM async document, kill this.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This extension is currently not used and it is not aligned with
the error handling on async VM_BIND. Let's remove it and along with
that, since it was the only extension for the vm_create, remove VM
extension entirely.
v2: rebase on top of the removal of drm_xe_ext_exec_queue_set_property
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
There really is no difference between 'struct drm_xe_ext_vm_set_property'
and 'struct drm_xe_ext_exec_queue_set_property', they are extensions which
specify a <property, value> pair. Replace the two extensions with a single
common 'struct drm_xe_ext_set_property' extension. The rationale is that
rather than have each XE module (including future modules) invent their own
property/value extensions, all XE modules use a common set_property
extension when possible.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Functionality of XE_EXEC_QUEUE_SET_PROPERTY_COMPUTE_MODE deprecated in a
previous patch, drop from uAPI. The property is just simply inherented
from the VM.
v2:
- Update commit message (Niranjana)
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use different members in the drm_xe_vm_bind_op for op and for flags as
it is done in other structures.
Type is left to u32 to leave enough room for future operations and flags.
v2: Remove the XE_VM_BIND_* flags shift (Rodrigo Vivi)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/303
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Perf measurements rely on CPU and engine timestamps to correlate
events of interest across these time domains. Current mechanisms get
these timestamps separately and the calculated delta between these
timestamps lack enough accuracy.
To improve the accuracy of these time measurements to within a few us,
add a query that returns the engine and cpu timestamps captured as
close to each other as possible.
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24591
v2:
- Fix kernel-doc warnings (CI)
- Document input params and group them together (Jose)
- s/cs/engine/ (Jose)
- Remove padding in the query (Ashutosh)
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo finished the s/cs/engine renaming]
There are a set of engine group busyness counters provided by HW which are
perfect fit to be exposed via PMU perf events.
BSPEC: 46559, 46560, 46722, 46729, 52071, 71028
events can be listed using:
perf list
xe_0000_03_00.0/any-engine-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/copy-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/interrupts/ [Kernel PMU event]
xe_0000_03_00.0/media-group-busy-gt0/ [Kernel PMU event]
xe_0000_03_00.0/render-group-busy-gt0/ [Kernel PMU event]
and can be read using:
perf stat -e "xe_0000_8c_00.0/render-group-busy-gt0/" -I 1000
time counts unit events
1.001139062 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
2.003294678 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
3.005199582 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
4.007076497 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
5.008553068 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
6.010531563 43520 ns xe_0000_8c_00.0/render-group-busy-gt0/
7.012468029 44800 ns xe_0000_8c_00.0/render-group-busy-gt0/
8.013463515 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
9.015300183 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.017233010 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
10.971934120 0 ns xe_0000_8c_00.0/render-group-busy-gt0/
The pmu base implementation is taken from i915.
v2:
Store last known value when device is awake return that while the GT is
suspended and then update the driver copy when read during awake.
v3:
1. drop init_samples, as storing counters before going to suspend should
be sufficient.
2. ported the "drm/i915/pmu: Make PMU sample array two-dimensional" and
dropped helpers to store and read samples.
3. use xe_device_mem_access_get_if_ongoing to check if device is active
before reading the OA registers.
4. dropped format attr as no longer needed
5. introduce xe_pmu_suspend to call engine_group_busyness_store
6. few other nits.
v4: minor nits.
v5: take forcewake when accessing the OAG registers
v6:
1. drop engine_busyness_sample_type
2. update UAPI documentation
v7:
1. update UAPI documentation
2. drop MEDIA_GT specific change for media busyness counter.
Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Co-developed-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The min_page_size is useful information to ensure alignment and it is
an API actually in use. However max_page_size doesn't bring any useful
information to the userspace hence being not used at all.
So, let's remove and only bring it back if that ever gets used.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Fix typos, lingo and other small things identified during uapi
review.
v2: Also fix ALIGNMENT typo at xe_query.c
v3: Do not touch property to get/set. (Francois)
Link: https://lore.kernel.org/all/863bebd0c624d6fc2b38c0a06b63e468b4185128.camel@linux.intel.com/
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Engine was inappropriately used to refer to execution queues and it
also created some confusion with hardware engines. Where it applies
the exec_queue variable name is changed to q and comments are also
updated.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/162
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Send uevent in case of gt reset failure. This intimation can be used by
userspace monitoring tool to do the device level reset/reboot
when GT reset fails. udevadm can be used to monitor the uevents.
v2:
- Support only gt failure notification (Rodrigo)
v3
- Rectify the comments in header file.
v4
- Use pci kobj instead of drm kobj for notification.(Rodrigo)
- Cleanup (Badal)
v5
- Add tile id and gt id as additional info provided by uevent.
- Provide code documentation for the uevent. (Rodrigo)
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This config is the only real one. If execlist remains in the
code it will forever be experimental and we shouldn't maintain
an uapi like that for that experimental piece of code that
should never be used by real users.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Mostly the same as i915. We add a new hint for userspace to force an
object into the mappable part of vram.
We also need to tell userspace how large the mappable part is. In Vulkan
for example, there will be two vram heaps for small-bar systems. And
here the size of each heap needs to be known. Likewise the used/avail
tracking needs to account for the mappable part.
We also limit the available tracking going forward, such that we limit
to privileged users only, since these values are system wide and are
technically considered an info leak.
v2 (Maarten):
- s/NEEDS_CPU_ACCESS/NEEDS_VISIBLE_VRAM/ in the uapi. We also no
longer require smem as an extra placement. This is more flexible,
and lets us use this for clear-color surfaces, since we need CPU access
there but we don't want to attach smem, since that effectively disables
CCS from kernel pov.
- Reject clear-color CCS buffers where NEEDS_VISIBLE_VRAM is not set,
instead of migrating it behind the scenes.
v3 (José):
- Split the changes that limit the accounting for perfmon_capable()
into a separate patch.
- Use XE_BO_CREATE_VRAM_MASK.
v4 (Gwan-gyeong Mun):
- Add some kernel-doc for the query bits.
v5:
- One small kernel-doc correction. The cpu_visible_size and
corresponding used tracking are always zero for non
XE_MEM_REGION_CLASS_VRAM.
v6:
- Without perfmon_capable() it likely makes more sense to report as
zero, instead of reporting as used == total size. This should give
similar behaviour as i915 which rather tracks free instead of used.
- Only enforce NEEDS_VISIBLE_VRAM on rc_ccs_cc_plane surfaces when the
device is actually small-bar.
Testcase: igt/tests/xe_query
Testcase: igt/tests/xe_mmap@small-bar
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Filip Hazubski <filip.hazubski@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Using jiffies as a timeout from userspace is weird even if
theoretically exists possiblity of acquiring jiffies via getconf.
Unfortunately this method is unreliable and the returned
value may vary from the one configured in the kernel config.
Now timeout is expressed in nanoseconds and its interpretation depends
on setting DRM_XE_UFENCE_WAIT_ABSTIME flag. Relative timeout (flag
is not set) means fence expire at now() + timeout. Absolute timeout
(flag is set) means that the fence expires at exact point of time.
Passing negative timeout means we will wait "forever" by setting
wait time to MAX_SCHEDULE_TIMEOUT.
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230628055141.398036-2-zbigniew.kempczynski@intel.com
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
./include/uapi/drm/xe_drm.h:263: warning: Function parameter or member
'gts' not described in 'drm_xe_query_gts'
./include/uapi/drm/xe_drm.h:854: WARNING: Inline emphasis start-string
without end-string.
With the idea to also include the uapi file in the pre-merge CI hooks
when building the kernel-doc, so first make sure it's clean:
https://gitlab.freedesktop.org/drm/xe/ci/-/merge_requests/16
v2: (Francois)
- It makes more sense to just fix the kernel-doc for 'gts'
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since we need to extend this, we should also take the time to add some
basic kernel-doc here for the existing bits. Note that this is all still
subject to change when upstreaming.
Also convert XE_MEM_REGION_CLASS_* into an enum, so we can more easily
create links to it from other parts of the uapi.
Suggested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Filip Hazubski <filip.hazubski@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Provide information on the types of topology masks that can be
queried and add some examples.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Align on same rule in the whole file: defines then doc then relevant
field, with an empty line to separate fields.
v2:
- Rebase on drm-xe-next
- Fix ordering of defines and fields in uAPI (Lucas De Marchi)
v3: Remove useless empty lines (Lucas De Marchi)
v4: Move changelog to commit
v5: Rebase
Reported-by: Oded Gabbay <ogabbay@kernel.org>
Link: https://lists.freedesktop.org/archives/intel-xe/2023-May/004704.html
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This adds documentation to the various structures used to query
memory, GTs, topology, engines, and so on. It includes a functional
code snippet to query engines.
v2:
- Rebase on drm-xe-next
- Also document structures related to drm_xe_device_query, changed
pseudo code to snippet (Lucas De Marchi)
v3:
- Move changelog to commit
- Fix warnings showed only using dim checkpath
Reported-by: Oded Gabbay <ogabbay@kernel.org>
Link: https://lists.freedesktop.org/archives/intel-xe/2023-May/004704.html
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add uAPI and implementation for NULL bindings. A NULL binding is defined
as writes dropped and read zero. A single bit in the uAPI has been added
which results in a single bit in the PTEs being set.
NULL bindings are intendedd to be used to implement VK sparse bindings,
in particular residencyNonResidentStrict property.
v2: Fix BUG_ON shown in VK testing, fix check patch warning, fix
xe_pt_scan_64K, update __gen8_pte_encode to understand NULL bindings,
remove else if vma_addr
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Suggested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix spacing, alignment, and repeated words in the documentation.
Reported-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Move the definition of drm_xe_engine_class_instance to group it with
other engine related structs and to follow the ioctls order.
Reported-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Replace the license text with its SPDX-License-Identifier for
quick identification of the license and consistency with the
rest of the driver.
Reported-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since memory and address spaces are a tile concept rather than a GT
concept, we need to plumb tile-based handling through lots of
memory-related code.
Note that one remaining shortcoming here that will need to be addressed
before media GT support can be re-enabled is that although the address
space is shared between a tile's GTs, each GT caches the PTEs
independently in their own TLB and thus TLB invalidation should be
handled at the GT level.
v2:
- Fix kunit test build.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pad the uAPI definition so that it would align identically between
64-bit and 32-bit uarch, so consumers using this header will work
correctly from 32-bit compat userspace on a 64-bit kernel. Do it
in a minimally invasive way, so that 64-bit userspace will still
work with the previous header, and so that no fields suddenly
change sizes.
Originally inspired by mlankhorst.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Intel Vulkan driver needs to know what is the maximum priority to fill
a device info struct for applications.
Right now we getting this information by creating a engine and setting
priorities from min to high to know what is the maximum priority for
running process but this leads to info messages to be printed to
dmesg:
xe 0000:03:00.0: [drm] Ioctl argument check failed at drivers/gpu/drm/xe/xe_engine.c:178: value == DRM_SCHED_PRIORITY_HIGH && !capable(CAP_SYS_NICE)
It does not cause any harm but when executing a test suite like
crucible it causes thousands of those messages to be printed.
So here adding one more property to drm_xe_query_config to fetch the
max engine priority.
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
All structs and defines had already been renamed to "xe", but some
comments with "i915" were left over. Rename them.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20230313211628.2492587-1-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is intended to get some properties that are of interest of UMDs
like the ban state.
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Engine property get uAPI will be added, so to avoid ambiguity here
renaming XE_ENGINE_PROPERTY_X to XE_ENGINE_SET_PROPERTY_X.
No changes in behavior.
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Updates for v6.8:
Core:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
on register write
- Kconfig fix for QMP dependency
- DT schema fixes
DPU:
- Add support for SDM670, SM8650
- Enable SmartDMA on SM8350 and SM8450
- Correct UBWC settings for SC8280XP
- Fix catalog settings for SC8180X
- Actually make use of the version to switch between QSEED3/3LITE/4
scalers
- Use devres-managed and drm-managed allocations where appropriate
- misc other fixes
- Enabled YUV writeback on SC7280, SM8250
- Enabled writeback on SM8350, SM8450
- CRC fix when encoder is selected as the input source
- other misc fixes
MDP4:
- Use devres-managed and drm-managed allocations where appropriate
- flush vblank event on CRTC disable
MDP5:
- Use devres-managed and drm-managed allocations where appropriate
DP:
- Add support for SM8650
- Enable PM runtime support
- Merge msm-specific debugfs dir with the generic one
- Described DisplayPort on SM8150 in DeviceTree bindings
- Moved dp_display_get_next_bridge() to probe()
DSI:
- Add support for SM8650
- Enable PM runtime support
GPU/GEM:
- demote userspace triggerable warnings to debug
- add GEM object metadata UAPI
- move GPU devcoredumps to GPU device
- fix hangcheck to skip retired submits
- expose UBWC config to userspace
- fix a680 chip-id
- drm_exec conversion
- drm/ci: remove rebase-merge directory (to unblock CI)
[airlied: fix drm_exec/amd interaction]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs9auYqmo-7NSd9FsbNBCDf7aBevd=4xkcF3A5G_OGvMQ@mail.gmail.com
amdgpu:
- Suspend fixes
- Misc code cleanups
- JPEG fix
- Add AMD specific color management (protected by AMD_PRIVATE_COLOR)
- UHBR13.5 cable fixes
- Misc display fixes
- Display WB fixes
- PSR fixes
- XGMI fix
- ACPI WBRF support for handling potential RF interference from GPU clocks
- Enable tunneling on high priority compute queues
- drm_edid.h include cleanup
- VPE DPM support
- SMU 13 fixes
- Fix possible double frees in error paths
- Misc fixes
amdkfd:
- Support import and export of dma-bufs using GEM handles
- MES shader debugger fixes
- SVM fixes
radeon:
- drm_edid.h include cleanup
- Misc code cleanups
- Fix possible memory leak in error path
drm:
- Increase max objects to accomodate new color props
- Make replace_property_blob_from_id a DRM helper
- Track color management changes per plane
platform-x86:
- Merge immutable branch from Hans for platform dependencies for WBRF to coordinate
merge of WBRF feature across wifi, platform, and GPU
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZXygTgAKCRC93/aFa7yZ
2EW1AQCILfGTtDWXzgLSpUBtt9jOooHqaSrah19Cfw0HlA3QIQD+OCohXH1LLZo1
tYHyfsLv0LsNawI198qABzB1PwptSAI=
=M1AO
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-next-6.8-2023-12-15' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.8-2023-12-15:
amdgpu:
- Suspend fixes
- Misc code cleanups
- JPEG fix
- Add AMD specific color management (protected by AMD_PRIVATE_COLOR)
- UHBR13.5 cable fixes
- Misc display fixes
- Display WB fixes
- PSR fixes
- XGMI fix
- ACPI WBRF support for handling potential RF interference from GPU clocks
- Enable tunneling on high priority compute queues
- drm_edid.h include cleanup
- VPE DPM support
- SMU 13 fixes
- Fix possible double frees in error paths
- Misc fixes
amdkfd:
- Support import and export of dma-bufs using GEM handles
- MES shader debugger fixes
- SVM fixes
radeon:
- drm_edid.h include cleanup
- Misc code cleanups
- Fix possible memory leak in error path
drm:
- Increase max objects to accomodate new color props
- Make replace_property_blob_from_id a DRM helper
- Track color management changes per plane
platform-x86:
- Merge immutable branch from Hans for platform dependencies for WBRF to coordinate
merge of WBRF feature across wifi, platform, and GPU
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZXygTgAKCRC93/aFa7yZ
# 2EW1AQCILfGTtDWXzgLSpUBtt9jOooHqaSrah19Cfw0HlA3QIQD+OCohXH1LLZo1
# tYHyfsLv0LsNawI198qABzB1PwptSAI=
# =M1AO
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 16 Dec 2023 04:51:58 AEST
# gpg: using EDDSA key 203B921D836B5735349902BDBDDFF6856BBC99D8
# gpg: Can't check signature: No public key
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215193519.5040-1-alexander.deucher@amd.com
User will provide a nonce via the INFO ioctl, and will retrieve
the signed device info generated using given nonce.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
->size in struct qaic_attach_slice_hdr is redundant since we have BO handle
and its size can be retrieved from base BO structure.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-2-quic_jhugo@quicinc.com
Create drm_color_ctm_3x4 to support 3x4-dimension plane CTM matrix and
convert DRM CTM to DC CSC float matrix.
v3:
- rename ctm2 to ctm_3x4 (Harry)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use "its" for possessive form instead of "it's".
Hyphenate multi-word adjectives.
Correct some spelling.
End one line of code with ';' instead of ','. The before and after
object files are identical.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213044014.21410-1-rdunlap@infradead.org
Correct spellos reported by codespell.
Fix some grammar (as 's' to a few words).
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213044107.29214-1-rdunlap@infradead.org
Correct spelling mistakes that were identified by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213043925.13852-1-rdunlap@infradead.org
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
This parameter is programmed by the kernel and influences the tiling
layout of images. Exposing it to userspace will allow it to tile/untile
images correctly without guessing what value the kernel programmed, and
allow us to change it in the future without breaking userspace.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/571181/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This reverts commit 85863a4e16.
Although the Solid Fill planes patchset got all reviews and
acknowledgements, it doesn't fulfill requirements for the new uABI. It
has neither corresponding open-source userspace implementation nor the
IGT tests coverage. Reverting this patchset until userspace obligations
are fulfilled.
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204131455.19023-7-dmitry.baryshkov@linaro.org
Document and add support for solid_fill property to drm_plane. In
addition, add support for setting and getting the values for solid_fill.
To enable solid fill planes, userspace must assign a property blob to
the "solid_fill" plane property containing the following information:
struct drm_mode_solid_fill {
u32 r, g, b, pad;
};
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-2-780188bfa7b2@quicinc.com
Add a new flag to let userspace provide a deadline as a hint for syncobj
and timeline waits. This gives a hint to the driver signaling the
backing fences about how soon userspace needs it to compete work, so it
can adjust GPU frequency accordingly. An immediate deadline can be
given to provide something equivalent to i915 "wait boost".
v2: Use absolute u64 ns value for deadline hint, drop cap and driver
feature flag in favor of allowing count_handles==0 as a way for
userspace to probe kernel for support of new flag
v3: More verbose comments about UAPI
v4: Fix negative zero, s/deadline_ns/deadline_nsec/ for consistency with
existing ioctl struct fields
v5: Comment/description typo fixes
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
[DB: fixed checkpatch warnings]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823215458.203366-2-robdclark@gmail.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A copy performance query job is a job that copy the complete
or partial result of a query to a buffer. In order to copy the result of
a performance query to a buffer, we need to get the values from the
performance monitors.
So, create a user extension for the CPU job that enables the creation
of a copy performance query job. This user extension will allow the creation
of a CPU job that copy the results of a performance query to a BO with the
possibility to indicate the availability with a availability bit.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-19-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A reset performance query job is a job that resets the
performance queries by resetting the values of the perfmons. Moreover,
we also reset the syncobjs related to the availability of the query.
So, create a user extension for the CPU job that enables the creation
of a reset performance job. This user extension will allow the creation of
a CPU job that resets the perfmons values and resets the availability syncobj.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-18-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A copy timestamp query job is a job that copy the complete
or partial result of a query to a buffer. As V3D doesn't provide any
mechanism to obtain a timestamp from the GPU, it is a job that needs
CPU intervention.
So, create a user extension for the CPU job that enables the creation
of a copy timestamp query job. This user extension will allow the creation
of a CPU job that copy the results of a timestamp query to a BO with the
possibility to indicate the timestamp availability with a availability bit.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-17-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A reset timestamp job is a job that resets the timestamp
queries based on the value offset of the first query. As V3D doesn't
provide any mechanism to obtain a timestamp from the GPU, it is a job
that needs CPU intervention.
So, create a user extension for the CPU job that enables the creation
of a reset timestamp job. This user extension will allow the creation of
a CPU job that resets the timestamp value in the timestamp BO and resets
the availability syncobj.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-16-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A timestamp query job is a job that calculates the
query timestamp and updates the query availability by signaling a
syncobj. As V3D doesn't provide any mechanism to obtain a timestamp
from the GPU, it is a job that needs CPU intervention.
So, create a user extension for the CPU job that enables the creation
of a timestamp query job. This user extension will allow the creation of
a CPU job that performs the timestamp query calculation and updates the
timestamp BO with the proper value.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-15-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. An indirect CSD job is a job that, when executed in the
queue, will map the indirect buffer, read the dispatch parameters, and
submit a regular dispatch. Therefore, it is a job that needs CPU
intervention.
So, create a user extension for the CPU job that enables the creation
of an indirect CSD. This user extension will allow the creation of a CSD
job linked to a CPU job. The CPU job will wait for the indirect CSD job
dependencies and, once they are signaled, it will update the CSD job
parameters.
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-14-mcanal@igalia.com
Create a new type of job, a CPU job. A CPU job is a type of job that
performs operations that requires CPU intervention. The overall idea is
to use user extensions to enable different types of CPU job, allowing the
CPU job to perform different operations according to the type of user
extension. The user extension ID identify the type of CPU job that must
be dealt.
Having a CPU job is interesting for synchronization purposes as a CPU
job has a queue like any other V3D job and can be synchoronized by the
multisync extension.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-9-mcanal@igalia.com
Virtualized drivers place additional restrictions on the cursor plane
which breaks the contract of universal planes. To allow atomic
modesettings with virtualized drivers the clients need to advertise
that they're capable of dealing with those extra restrictions.
To do that introduce DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT which
lets DRM know that the client is aware of and capable of dealing with
the extra restrictions on the virtual cursor plane.
Setting this option to true makes DRM expose the cursor plane on
virtualized drivers. The userspace is expected to set the hotspots
and handle mouse events on that plane.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023074613.41327-9-aesteve@redhat.com
This new kernel capability indicates whether async page-flips are
supported via the atomic uAPI. DRM clients can use it to check
for support before feeding DRM_MODE_PAGE_FLIP_ASYNC to the kernel.
Make it clear that DRM_CAP_ASYNC_PAGE_FLIP is for legacy uAPI only.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122161941.320564-4-andrealmeid@igalia.com
If the driver supports it, allow user-space to supply the
DRM_MODE_PAGE_FLIP_ASYNC flag to request an async page-flip.
Set drm_crtc_state.async_flip accordingly.
Document that drivers will reject atomic commits if an async
flip isn't possible. This allows user-space to fall back to
something else. For instance, Xorg falls back to a blit.
Another option is to wait as close to the next vblank as
possible before performing the page-flip to reduce latency.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Co-developed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122161941.320564-3-andrealmeid@igalia.com
Add the UAPI implementation for the PowerVR driver.
Changes from v8:
- Fixed documentation for unmapping, which previously suggested the
size was not used
- Corrected license identifier
Changes from v7:
- Remove prefixes from DRM_PVR_BO_* flags
- Improve struct drm_pvr_ioctl_create_hwrt_dataset_args documentation
- Remove references to static area carveouts
- CREATE_BO ioctl now returns an error if provided size isn't page aligned
- Clarify documentation for DRM_PVR_STATIC_DATA_AREA_EOT
Changes from v6:
- Add padding to struct drm_pvr_dev_query_gpu_info
- Improve BYPASS_CACHE flag documentation
- Add SUBMIT_JOB_FRAG_CMD_DISABLE_PIXELMERGE flag
Changes from v4:
- Remove CREATE_ZEROED flag for BO creation (all buffers are now zeroed)
Co-developed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Co-developed-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Sarah Walker <sarah.walker@imgtec.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://lore.kernel.org/r/8c95a3a1d685e2b44d361b95a19eae5a478fb9d1.1700668843.git.donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The EXT_external_objects extension is a bit awkward as it doesn't pass
explicit modifiers, leaving the importer to guess with incomplete
information. In the case of vk (turnip) exporting and gl (freedreno)
importing, the "OPTIMAL_TILING_EXT" layout depends on VkImageCreateInfo
flags (among other things), which the importer does not know. Which
unfortunately leaves us with the need for a metadata back-channel.
The contents of the metadata are defined by userspace. The
EXT_external_objects extension is only required to work between
compatible versions of gl and vk drivers, as defined by device and
driver UUIDs.
v2: add missing metadata kfree
v3: Rework to move copy_from/to_user out from under gem obj lock
to avoid angering lockdep about deadlocks against fs-reclaim
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/566157/
There are two problems with the current method of determining the
virtio-gpu debug name.
1) TASK_COMM_LEN is defined to be 16 bytes only, and this is a
Linux kernel idiom (see PR_SET_NAME + PR_GET_NAME). Though,
Android/FreeBSD get around this via setprogname(..)/getprogname(..)
in libc.
On Android, names longer than 16 bytes are common. For example,
one often encounters a program like "com.android.systemui".
The virtio-gpu spec allows the debug name to be up to 64 bytes, so
ideally userspace should be able to set debug names up to 64 bytes.
2) The current implementation determines the debug name using whatever
task initiated virtgpu. This is could be a "RenderThread" of a
larger program, when we actually want to propagate the debug name
of the program.
To fix these issues, add a new CONTEXT_INIT param that allows userspace
to set the debug name when creating a context.
It takes a null-terminated C-string as the param value. The length of the
string (excluding the terminator) **should** be <= 64 bytes. Otherwise,
the debug_name will be truncated to 64 bytes.
Link to open-source userspace:
https://android-review.googlesource.com/c/platform/hardware/google/gfxstream/+/2787176
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Josh Simonot <josh.simonot@gmail.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018181727.772-2-gurchetansingh@chromium.org
Usages of DRM_IVPU_BO_UNCACHED should be replaced by DRM_IVPU_BO_WC.
There is no functional benefit from DRM_IVPU_BO_UNCACHED if these
buffers are never mapped to host VM.
This allows to cut the buffer handling code in the kernel driver
by half.
Usage of DRM_IVPU_BO_UNCACHED buffers was removed from user-space
driver and will not be part of first UMD release.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031073156.1301669-4-stanislaw.gruszka@linux.intel.com
Add support to partially execute a slice which is resized to zero.
Executing a zero size slice in a BO should mean that there is no DMA
transfers involved but you should still configure doorbell and semaphores.
For example consider a BO of size 18K and it is sliced into 3 6K slices
and user calls partial execute ioctl with resize as 10K.
slice 0 - size is 6k and offset is 0, so resize of 10K will not cut short
this slice hence we send the entire slice for execution.
slice 1 - size is 6k and offset is 6k, so resize of 10K will cut short this
slice and only the first 4k should be DMA along with configuring
doorbell and semaphores.
slice 2 - size is 6k and offset is 12k, so resize of 10k will cut short
this slice and no DMA transfer would be involved but we should
would configure doorbell and semaphores.
This change begs to change the behavior of 0 resize. Currently, 0 resize
partial execute ioctl behaves exactly like execute ioctl i.e. no resize.
After this patch all the slice in BO should behave exactly like slice 2 in
above example.
Refactor copy_partial_exec_reqs() to make it more readable and less
complex.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027164330.11978-1-quic_jhugo@quicinc.com
drm-misc-next for v6.7-rc1:
drm-misc-next-2023-10-19 + following:
UAPI Changes:
Cross-subsystem Changes:
- Convert fbdev drivers to use fbdev i/o mem helpers.
Core Changes:
- Use cross-references for macros in docs.
- Make drm_client_buffer_addb use addfb2.
- Add NV20 and NV30 YUV formats.
- Documentation updates for create_dumb ioctl.
- CI fixes.
- Allow variable number of run-queues in scheduler.
Driver Changes:
- Rename drm/ast constants.
- Make ili9882t its own driver.
- Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu.
- Add planar formats to rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
The main motivation is to repeat that dumb buffers should not be
abused for anything else than basic software rendering with KMS.
User-space devs are more likely to look at the IOCTL docs than to
actively search for the driver-oriented "Dumb Buffer Objects"
section.
v2: reference DRM_CAP_DUMB_BUFFER, DRM_CAP_DUMB_PREFERRED_DEPTH and
DRM_CAP_DUMB_PREFER_SHADOW (Pekka)
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821131548.269204-1-contact@emersion.fr
DRM_FORMAT_NV20 and DRM_FORMAT_NV30 formats is the 2x1 and non-subsampled
variant of NV15, a 10-bit 2-plane YUV format that has no padding between
components. Instead, luminance and chrominance samples are grouped into 4s
so that each group is packed into an integer number of bytes:
YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
The '20' and '30' suffix refers to the optimum effective bits per pixel
which is achieved when the total number of luminance samples is a multiple
of 4.
V2: Added NV30 format
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023173718.188102-2-jonas@kwiboo.se
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmU1ngkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGrsIH/0k/+gdBBYFFdEym
foRhKir9WV3ZX4oIozJjA1f7T+qVYclKs6kaYm3gNepRBb6AoG8pdgv4MMAqhYsf
QMe2XHi0MrO/qKBgfNfivxEa9jq+0QK5uvTbqCRqCAB8LfwVyDqapCmg3EuiZcPW
UbMITmnwLIfXgPxvp9rabmCsTqO6FLbf0GDOVIkNSAIDBXMpcO1iffjrWUbhRa7n
oIoiJmWJLcXLxPWDsRKbpJwzw2cIG08YhfQYAiQnC3YaeRm1FKLDIICRBsmfYzja
rWv9r4dn4TDfV4/AnjggQnsZvz2yPCxNaFSQIT88nIeiLvyuUTJ9j8aidsSfMZQf
xZAbzbA=
=NoQv
-----END PGP SIGNATURE-----
BackMerge tag 'v6.6-rc7' into drm-next
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The notable changes are:
- uAPI changes:
- Expose tsc clock sampling to better sync clock information in profiler.
- Enhance engine error reporting in the info ioctl.
- Block access to the eventfd operations through the control device.
- Disable the option of the user to register multiple times with the same
offset for timestamp dump by the driver. If a user wants to use the same
offset in the timestamp buffer for different interrupt, it needs to first
de-register the offset.
- When exporting dma-buf (for p2p), force the user to specify size/offset
in multiples of PAGE_SIZE. This is instead of the driver doing the
rounding to PAGE_SIZE, which has caused the driver to map more memory
than was intended by the user.
- New features and improvements:
- Complete the move of the driver to the accel subsystem by removing the
custom habanalabs class and major and registering to accel subsystem.
- Move the firmware interface files to include/linux/habanalabs. This is
a pre-requisite for upstreaming the NIC drivers of Gaudi (as they need to
include those files).
- Perform device hard-reset upon PCIe AXI drain event to prevent the failure
from cascading to different IP blocks in the SoC. In secured environments,
this is done automatically by the firmware.
- Print device name when it is removed for better debuggability.
- Add support for trace of dma map sgtable operations.
- Optimize handling of user interrupts by splitting the interrupts to two
lists. One list for fast handling and second list for handling with
timestamp recording, which is slower.
- Prevent double device hard-reset due to 2 adjacent H/W events.
- Set device status 'malfunction' while in rmmod.
- Firmware related fixes:
- Extend preboot timeout because preboot loading might take longer than
expected in certain cases.
- Add a protection mechanism for the Event Queue. In case it is full, the
firmware will be able to notify about it through a dedicated interrupt.
- Perform device hard-reset in case scrubbing of memory has failed.
- Bug fixes and code cleanups:
- Small fixes of dma-buf handling in Gaudi2, such as handling an offset != 0,
using the correct exported size, creation of sg table.
- Fix spmu mask creation.
- Fix bug in wait for cs completion for decoder workloads.
- Cleanup Greco name from documentation.
- Fix bug in recording timestamp during cs completion interrupt handling.
- Fix CoreSight ETF configuration and flush logic.
- Fix small bug in hpriv_list handling (the list that contains the private
data per process that opens our device).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmUlHoQACgkQZR1NuKta
54DsXQf8CW+W4iWJf5UDTj/E/giu9rVRrsUsU0hhCcXbecIxRsLObYXtulENu5/u
VuEAo/tAvo0LUKi8pdIv6ernDKaxZ1+fimlfXMCzllAA/ts3yp1NgunprsIsx3tv
YgcJ2GNR8UlVZ1qYuZl+4dOTyD0yfRMROUXBe7wqKnUXOEepOiLBxq6W15tZiJnx
L+V0yGkNk6pAoADIXLW9EgEXiN/bJZCXGPWp06i/Nz7cHIHJGoV59wAqftqllCtk
8ZMkLByjlQKPhc5AgWBtKE8EGVip3sm7b/Q2Gq0ZXdZiebyVJ+AjuuDOdtq1UCIw
Rcp2576E7rByIBu3RAFlrioWhuR5Zw==
=2ien
-----END PGP SIGNATURE-----
Merge tag 'drm-habanalabs-next-2023-10-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver changes for v6.7.
The notable changes are:
- uAPI changes:
- Expose tsc clock sampling to better sync clock information in profiler.
- Enhance engine error reporting in the info ioctl.
- Block access to the eventfd operations through the control device.
- Disable the option of the user to register multiple times with the same
offset for timestamp dump by the driver. If a user wants to use the same
offset in the timestamp buffer for different interrupt, it needs to first
de-register the offset.
- When exporting dma-buf (for p2p), force the user to specify size/offset
in multiples of PAGE_SIZE. This is instead of the driver doing the
rounding to PAGE_SIZE, which has caused the driver to map more memory
than was intended by the user.
- New features and improvements:
- Complete the move of the driver to the accel subsystem by removing the
custom habanalabs class and major and registering to accel subsystem.
- Move the firmware interface files to include/linux/habanalabs. This is
a pre-requisite for upstreaming the NIC drivers of Gaudi (as they need to
include those files).
- Perform device hard-reset upon PCIe AXI drain event to prevent the failure
from cascading to different IP blocks in the SoC. In secured environments,
this is done automatically by the firmware.
- Print device name when it is removed for better debuggability.
- Add support for trace of dma map sgtable operations.
- Optimize handling of user interrupts by splitting the interrupts to two
lists. One list for fast handling and second list for handling with
timestamp recording, which is slower.
- Prevent double device hard-reset due to 2 adjacent H/W events.
- Set device status 'malfunction' while in rmmod.
- Firmware related fixes:
- Extend preboot timeout because preboot loading might take longer than
expected in certain cases.
- Add a protection mechanism for the Event Queue. In case it is full, the
firmware will be able to notify about it through a dedicated interrupt.
- Perform device hard-reset in case scrubbing of memory has failed.
- Bug fixes and code cleanups:
- Small fixes of dma-buf handling in Gaudi2, such as handling an offset != 0,
using the correct exported size, creation of sg table.
- Fix spmu mask creation.
- Fix bug in wait for cs completion for decoder workloads.
- Cleanup Greco name from documentation.
- Fix bug in recording timestamp during cs completion interrupt handling.
- Fix CoreSight ETF configuration and flush logic.
- Fix small bug in hpriv_list handling (the list that contains the private
data per process that opens our device).
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmUlHoQACgkQZR1NuKta
# 54DsXQf8CW+W4iWJf5UDTj/E/giu9rVRrsUsU0hhCcXbecIxRsLObYXtulENu5/u
# VuEAo/tAvo0LUKi8pdIv6ernDKaxZ1+fimlfXMCzllAA/ts3yp1NgunprsIsx3tv
# YgcJ2GNR8UlVZ1qYuZl+4dOTyD0yfRMROUXBe7wqKnUXOEepOiLBxq6W15tZiJnx
# L+V0yGkNk6pAoADIXLW9EgEXiN/bJZCXGPWp06i/Nz7cHIHJGoV59wAqftqllCtk
# 8ZMkLByjlQKPhc5AgWBtKE8EGVip3sm7b/Q2Gq0ZXdZiebyVJ+AjuuDOdtq1UCIw
# Rcp2576E7rByIBu3RAFlrioWhuR5Zw==
# =2ien
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 10 Oct 2023 19:51:00 AEST
# gpg: using RSA key ED311BA00042EF52DCB412C5651D4DB8AB5AE780
# gpg: Can't check signature: No public key
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZSUfiX4J7v4Wn0cU@ogabbay-vm-u22.habana-labs.com
kernel-doc emits a warning:
include/uapi/drm/nouveau_drm.h:49: warning: Cannot understand * @NOUVEAU_GETPARAM_EXEC_PUSH_MAX
on line 49 - I thought it was a doc line
We don't have a way to document a macro value via kernel-doc, so
change the "/**" kernel-doc marker to a C comment and format the comment
more like a kernel-doc comment for consistency.
Fixes: d59e75eef5 ("drm/nouveau: exec: report max pushs through getparam")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: Bragatheswaran Manickavel <bragathemanick0908@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008140231.17921-1-rdunlap@infradead.org
Greco was not upstreamed so no point of mentioning it here.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Add tsc clock to clock sync info, to enable using this clock for
sampling and sync it with device time.
Signed-off-by: Hen Alon <halon@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
To use drm_ioctl(), move the ioctls to the device specific ioctls
range at [DRM_COMMAND_BASE, DRM_COMMAND_END).
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User gets notification for every engine error report, but he still
lacks the exact engine information. Hence, we allow user to query
for the exact engine reported an error.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Correct typos of "occurred".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Report the maximum number of IBs that can be pushed with a single
DRM_IOCTL_NOUVEAU_EXEC through DRM_IOCTL_NOUVEAU_GETPARAM.
While the maximum number of IBs per ring might vary between chipsets,
the kernel will make sure that userspace can only push a fraction of the
maximum number of IBs per ring per job, such that we avoid a situation
where there's only a single job occupying the ring, which could
potentially lead to the ring run dry.
Using DRM_IOCTL_NOUVEAU_GETPARAM to report the maximum number of IBs
that can be pushed with a single DRM_IOCTL_NOUVEAU_EXEC implies that
all channels of a given device have the same ring size.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231002135008.10651-3-dakr@redhat.com
drm-misc-next for v6.7-rc1:
UAPI Changes:
- drm_file owner is now updated during use, in the case of a drm fd
opened by the display server for a client, the correct owner is
displayed.
- Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo
recycling.
Cross-subsystem Changes:
- Disable boot logo for au1200fb, mmpfb and unexport logo helpers.
Only fbcon should manage display of logo.
- Update freescale in MAINTAINERS.
- Add some bridge files to bridge in MAINTAINERS.
- Update gma500 driver repo in MAINTAINERS to point to drm-misc.
Core Changes:
- Move size computations to drm buddy allocator.
- Make drm_atomic_helper_shutdown(NULL) a nop.
- Assorted small fixes in drm_debugfs, DP-MST payload addition error handling.
- Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling.
- Handle bad (h/v)sync_end in EDID by clipping to htotal.
- Build GPUVM as a module.
Driver Changes:
- Simple drivers don't need to cache prepared result.
- Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot
more drm drivers.
- Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic,
nouveau, tc358768.
- Add NV12 for komeda writeback.
- Add arbitration lost event to synopsis/dw-hdmi-cec.
- Speed up s/r in nouveau by not restoring some big bo's.
- Assorted nouveau display rework in preparation for GSP-RM,
especially related to how the modeset sequence works and
the DP sequence in relation to link training.
- Update anx7816 panel.
- Support NVSYNC and NHSYNC in tegra.
- Allow multiple power domains in simple driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f1fae5eb-25b8-192a-9a53-215e1184ce81@linux.intel.com
Once a BO is attached with slicing configuration that BO can only be used
for that particular setting. With this new feature user can detach slicing
configuration off an already sliced BO and attach new slicing configuration
using QAIC_ATTACH_SLICE_BO.
This will support BO recycling.
detach_slice_bo() detaches slicing configuration from a BO. This new
helper function can also be used in release_dbc() as we are doing the
exact same thing.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
[jhugo: add documentation for new ioctl]
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-8-quic_jhugo@quicinc.com
->size field in struct qaic_bo stores user requested buffer size for
allocate path or size of the dmabuf(PRIME). Now for allocate path driver
allocates a BO of size which is PAGE_SIZE aligned, this size is already
stored in base BO structure (struct drm_gem_object).
So difference is ->size of struct qaic_bo stores the raw value coming from
user and ->size in struct drm_gem_object stores the PAGE_SZIE aligned size.
Do not use ->size from struct qaic_bo for any validation or operation
instead use ->size from struct drm_gem_object since we already have
allocated that much memory then why not use it. Only validate if user
is trying to use more then the BO size. This make the driver more flexible.
After this change ->size field of struct qaic_bo becomes redundant. Remove
it.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-2-quic_jhugo@quicinc.com
drm-misc-next for v6.7-rc1:
UAPI Changes:
- Nouveau changed to not set NO_PREFETCH flag explicitly.
Cross-subsystem Changes:
- Update documentation of dma-buf intro and uapi.
- fbdev/sbus fixes.
- Use initializer macros in a lot of fbdev drivers.
- Add Boris Brezillon as Panfrost driver maintainer.
- Add Jessica Zhang as drm/panel reviewer.
- Make more fbdev drivers use fb_ops helpers for deferred io.
- Small hid trailing whitespace fix.
- Use fb_ops in hid/picolcd
Core Changes:
- Assorted small fixes to ttm tests, drm/mst.
- Documentation updates to bridge.
- Add kunit tests for some drm_fb functions.
- Rework drm_debugfs implementation.
- Update xe documentation to mark todos as completed.
Driver Changes:
- Add support to rockchip for rv1126 mipi-dsi and vop.
- Assorted small fixes to nouveau, bridge/samsung-dsim,
bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper,
komeda, virtio, ssd130x.
- Add support for simple panels Mitsubishi AA084XE01,
JDI LPM102A188A,
- Documentation updates to accel/ivpu.
- Some nouveau scheduling/fence fixes.
- Power management related fixes and other fixes to ivpu.
- Assorted bridge/it66121 fixes.
- Make platform drivers return void in remove() callback.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
These flags (for GEM and SVM allocations) allocate
memory that allows for system-scope atomic semantics.
On GFX943 these flags cause caches to be avoided on
non-local memory.
On all other ASICs they are identical in functionality to the
equivalent COHERENT flags.
Corresponding Thunk patch is at
https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/pull/88
Reviewed-by: David Yat Sin <David.YatSin@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add HW IP for Video Processing Engine
to support user space CS.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, NO_PREFETCH is passed implicitly through
drm_nouveau_gem_pushbuf_push::length and drm_nouveau_exec_push::va_len.
Since this is a direct representation of how the HW is programmed it
isn't really future proof for a uAPI. Hence, fix this up for the new
uAPI and split up the va_len field of struct drm_nouveau_exec_push,
such that we keep 32bit for va_len and 32bit for flags.
For drm_nouveau_gem_pushbuf_push::length at least provide
NOUVEAU_GEM_PUSHBUF_NO_PREFETCH to indicate the bit shift.
While at it, fix up nv50_dma_push() as well, such that the caller
doesn't need to encode the NO_PREFETCH flag into the length parameter.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823181746.3446-1-dakr@redhat.com
Currently, NO_PREFETCH is passed implicitly through
drm_nouveau_gem_pushbuf_push::length and drm_nouveau_exec_push::va_len.
Since this is a direct representation of how the HW is programmed it
isn't really future proof for a uAPI. Hence, fix this up for the new
uAPI and split up the va_len field of struct drm_nouveau_exec_push,
such that we keep 32bit for va_len and 32bit for flags.
For drm_nouveau_gem_pushbuf_push::length at least provide
NOUVEAU_GEM_PUSHBUF_NO_PREFETCH to indicate the bit shift.
While at it, fix up nv50_dma_push() as well, such that the caller
doesn't need to encode the NO_PREFETCH flag into the length parameter.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823181746.3446-1-dakr@redhat.com
- SDMA 6.1.0 support
- SMU 13.x fixes
- PSP 13.x fixes
- HDP 6.1 support
- SMUIO 14.0 support
- IH 6.1 support
- Coding style cleanups
- Misc display fixes
- Initial Freesync panel replay support
- RAS fixes
- SDMA 5.2 MGCG updates
- SR-IOV fixes
- DCN3+ gamma fix
- Revert zpos properly until IGT regression is fixed
- NBIO 7.9 fixes
- Use TTM to manage the doorbell BAR
- Async flip fix
- DPIA tracing support
- DCN 3.x TMDS HDMI fixes
- FRU fixes
amdkfd:
- Coding style cleanups
- SVM fixes
- Trap handler fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
radeon:
- Coding style cleanups
drm buddy:
- Fix debugging output
UAPI:
- A new memory pool was added to amdgpu_drm.h since we converted doorbell BAR management to use TTM,
but userspace is blocked from allocating from it at this point, so kind of not really anything new
here per se
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZNahZwAKCRC93/aFa7yZ
2KNjAP0UV2vJZjrze7OQI/YoI+40UlGjS81nKGlMIN3eR8nzvAD/c9McLJViL82R
idEAK7tsr/MaCKoPAlED7CkUZiHNlQw=
=4w7I
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-next-6.6-2023-08-11' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amdgpu:
- SDMA 6.1.0 support
- SMU 13.x fixes
- PSP 13.x fixes
- HDP 6.1 support
- SMUIO 14.0 support
- IH 6.1 support
- Coding style cleanups
- Misc display fixes
- Initial Freesync panel replay support
- RAS fixes
- SDMA 5.2 MGCG updates
- SR-IOV fixes
- DCN3+ gamma fix
- Revert zpos properly until IGT regression is fixed
- NBIO 7.9 fixes
- Use TTM to manage the doorbell BAR
- Async flip fix
- DPIA tracing support
- DCN 3.x TMDS HDMI fixes
- FRU fixes
amdkfd:
- Coding style cleanups
- SVM fixes
- Trap handler fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
radeon:
- Coding style cleanups
drm buddy:
- Fix debugging output
UAPI:
- A new memory pool was added to amdgpu_drm.h since we converted doorbell BAR management to use TTM,
but userspace is blocked from allocating from it at this point, so kind of not really anything new
here per se
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZNahZwAKCRC93/aFa7yZ
# 2KNjAP0UV2vJZjrze7OQI/YoI+40UlGjS81nKGlMIN3eR8nzvAD/c9McLJViL82R
# idEAK7tsr/MaCKoPAlED7CkUZiHNlQw=
# =4w7I
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 12 Aug 2023 07:00:23 AEST
# gpg: using EDDSA key 203B921D836B5735349902BDBDDFF6856BBC99D8
# gpg: Can't check signature: No public key
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811211554.7804-1-alexander.deucher@amd.com
Add new dma range and change naming convention for virtual address
memory ranges managed by KMD.
New available ranges are named as follows:
* global range - global context accessible by FW
* aliased range - user context accessible by FW
* dma range - user context accessible by DMA
* shave range - user context accessible by shaves
* global shave range - global context accessible by shave nn
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-6-stanislaw.gruszka@linux.intel.com
Add DRM_IVPU_PARAM_CAPABILITIES parameters to get_param ioctl to query
driver capabilities. For now use it for identify metric streamer and
new dma memory range features. Currently upstream version of intel_vpu
does not have those, they will be added it the future.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-5-stanislaw.gruszka@linux.intel.com
This patch adds flags for a new gem domain AMDGPU_GEM_DOMAIN_DOORBELL
in the UAPI layer.
V2: Drop 'memory' from description (Christian)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
This commit provides the interfaces for the new UAPI motivated by the
Vulkan API. It allows user mode drivers (UMDs) to:
1) Initialize a GPU virtual address (VA) space via the new
DRM_IOCTL_NOUVEAU_VM_INIT ioctl. UMDs can provide a kernel reserved
VA area.
2) Bind and unbind GPU VA space mappings via the new
DRM_IOCTL_NOUVEAU_VM_BIND ioctl.
3) Execute push buffers with the new DRM_IOCTL_NOUVEAU_EXEC ioctl.
Both, DRM_IOCTL_NOUVEAU_VM_BIND and DRM_IOCTL_NOUVEAU_EXEC support
asynchronous processing with DRM syncobjs as synchronization mechanism.
The default DRM_IOCTL_NOUVEAU_VM_BIND is synchronous processing,
DRM_IOCTL_NOUVEAU_EXEC supports asynchronous processing only.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-4-dakr@redhat.com
nouveau > 10 years ago had a plan for new multiplexer inside a multiplexer
API using nvif. It never fully reached fruition, fast forward 10 years,
and the new vulkan driver is avoiding libdrm and calling ioctls, and
these 3 ioctls, getparam, channel alloc + free don't seem to be things
we'd want to use nvif for.
Undeprecate and put them into the uapi header so we can just copy it
into mesa later.
v2: use uapi types.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-3-dakr@redhat.com
Since commit 6b85aa68d9 ("drm: Enable PRIME import/export for all
drivers"), import/export is always supported. Document this so that
user-space knows what to expect.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712183156.191445-1-contact@emersion.fr
Convert struct drm_event to a kernel doc comment. Link to the
generic DRM event types. Add a basic description of each event
type.
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230717093032.600773-1-contact@emersion.fr
When I originally wrote these docs, I couldn't manage to insert a
cross-reference to a section. Here's how it can be done.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803095734.386761-1-contact@emersion.fr
Add sync object DRM UAPI support to VirtIO-GPU driver. Sync objects
support is needed by native context VirtIO-GPU Mesa drivers, it also will
be used by Venus and Virgl contexts.
Reviewed-by; Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> # amdgpu nctx
Tested-by: Rob Clark <robdclark@gmail.com> # freedreno nctx
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230416115237.798604-4-dmitry.osipenko@collabora.com
Introduce a new DRM_IOCTL_SYNCOBJ_EVENTFD IOCTL which signals an
eventfd from a syncobj.
This is useful for Wayland compositors to handle wait-before-submit.
Wayland clients can send a timeline point to the compositor
before the point has materialized yet, then compositors can wait
for the point to materialize via this new IOCTL.
The existing DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT IOCTL is not suitable
because it blocks. Compositors want to integrate the wait with
their poll(2)-based event loop.
Requirements for new uAPI:
- User-space patch: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4262
- IGT: https://lists.freedesktop.org/archives/igt-dev/2023-July/057893.html
v2:
- Wait for fence when flags is zero
- Improve documentation (Pekka)
- Rename IOCTL (Christian)
- Fix typo in drm_syncobj_add_eventfd() (Christian)
v3:
- Link user-space + IGT patches
- Add reference from overview docs
v4: fix IOCTL number conflict with GETFB2 (Nicholas Choi, Vitaly Prosyak)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: James Jones <jajones@nvidia.com>
Cc: Austin Shafer <ashafer@nvidia.com>
Cc: Vitaly Prosyak <vprosyak@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714111257.11940-1-contact@emersion.fr
Only the stuff inside the brackets should be indented.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428100115.9802-1-contact@emersion.fr
amd-drm-next-6.5-2023-06-02:
amdgpu:
- SR-IOV fixes
- Warning fixes
- Misc code cleanups and spelling fixes
- DCN 3.2 updates
- Improved DC FAMS support for better power management
- Improved DC SubVP support for better power management
- DCN 3.1.x fixes
- Max IB size query
- DC GPU reset fixes
- RAS updates
- DCN 3.0.x fixes
- S/G display fixes
- CP shadow buffer support
- Implement connector force callback
- Z8 power improvements
- PSP 13.0.10 vbflash support
- Mode2 reset fixes
- Store MQDs in VRAM to improve queue switch latency
- VCN 3.x fixes
- JPEG 3.x fixes
- Enable DC_FP on LoongArch
- GFXOFF fixes
- GC 9.4.3 partition support
- SDMA 4.4.2 partition support
- VCN/JPEG 4.0.3 partition support
- VCN 4.0.3 updates
- NBIO 7.9 updates
- GC 9.4.3 updates
- Take NUMA into account when allocating memory
- Handle NUMA for partitions
- SMU 13.0.6 updates
- GC 9.4.3 RAS updates
- Stop including unused swiotlb.h
- SMU 13.0.7 fixes
- Fix clock output ordering on some APUs
- Clean up DC FPGA code
- GFX9 preemption fixes
- Misc irq fixes
- S0ix fixes
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- PCIe fix for RDNA2
- kdoc fixes
- Documentation updates
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
radeon:
- Fix possible double free
- Stop including unused swiotlb.h
- Fix possible division by zero
ttm:
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
UAPI:
- Add new ctx query flag to better handle GPU resets
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290
- Add new interface to query and set shadow buffer for RDNA3
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986
- Add new INFO query for max IB size
Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3
amd-drm-next-6.5-2023-06-09:
amdgpu:
- S0ix fixes
- Initial SMU13 Overdrive support
- kdoc fixes
- Misc clode cleanups
- Flexible array fixes
- Display OTG fixes
- SMU 13.0.6 updates
- Revert some broken clock counter updates
- Misc display fixes
- GFX9 preemption fixes
- Add support for newer EEPROM bad page table format
- Add missing radeon secondary id
- Add support for new colorspace KMS API
- CSA fix
- Stable pstate fixes for APUs
- make vbl interface admin only
- Handle PCI accelerator class
amdkfd:
- Add debugger support for gdb
radeon:
- Fix possible UAF
drm:
- Add Colorspace functionality
UAPI:
- Add debugger interface for enabling gdb
Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi
- Add KMS colorspace API
Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
OpenGL EXT_robustness extension expects the driver to stop reporting
GUILTY_CONTEXT_RESET when the reset has completed and the GPU is ready
to accept submission again.
This commit adds a AMDGPU_CTX_QUERY2_FLAGS_RESET_IN_PROGRESS flag,
that let the UMD know that the reset is still not finished.
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake.
Driver Changes:
Fixes/improvements/new stuff:
- Use large rings for compute contexts (Chris Wilson)
- Better logging/debug of unexpected GuC communication issues (Michal Wajdeczko)
- Clear out entire reports after reading if not power of 2 size (Ashutosh Dixit)
- Limit lmem allocation size to succeed on SmallBars (Andrzej Hajda)
- perf/OA capture robustness improvements on DG2 (Umesh Nerlige Ramappa)
- Fix error code in intel_gsc_uc_heci_cmd_submit_nonpriv() (Dan Carpenter)
Future platform enablement:
- Add workaround 14016712196 (Tejas Upadhyay)
- HuC loading for MTL (Daniele Ceraolo Spurio)
- Allow user to set cache at BO creation (Fei Yang)
Miscellaneous:
- Use system include style for drm headers (Jani Nikula)
- Drop legacy CTB definitions (Michal Wajdeczko)
- Turn off the timer to sample frequencies when GT is parked (Ashutosh Dixit)
- Make PMU sample array two-dimensional (Ashutosh Dixit)
- Use the correct error value when kernel_context() fails (Andi Shyti)
- Fix second parameter type of pre-gen8 pte_encode callbacks (Nathan Chancellor)
- Fix parameter in gmch_ggtt_insert_{entries, page}() (Nathan Chancellor)
- Fix size_t format specifier in gsccs_send_message() (Nathan Chancellor)
- Use the fdinfo helper (Tvrtko Ursulin)
- Add some missing error propagation (Tvrtko Ursulin)
- Reduce I915_MAX_GT to 2 (Matt Atwood)
- Rename I915_PMU_MAX_GTS to I915_PMU_MAX_GT (Matt Atwood)
- Remove some obsolete definitions (John Harrison)
Merges:
- Merge drm/drm-next into drm-intel-gt-next (Tvrtko Ursulin)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZIH09fqe5v5yArsu@tursulin-desk
drm/i915 features for v6.5:
Features and functionality:
- Meteorlake (MTL) display enabling (Mika, Radhakrishna, José, Ankit, Clint,
Gustavo, Imre, Anusha, Juha-Pekka, Matt)
- Allow VRR to be toggled during fastsets (Ville)
- Allow arbitrary refresh rates with VRR eDP panels (Ville)
- Support async flips on linear buffers on display ver 12+ (Arun)
- New debugfs for display clock frequencies (Bhanuprakash)
- Taint kernel when force probing unsupported devices (Jani)
- Expose CRTC CTM property on ILK/SNB/VLV (Ville)
DRM subsystem changes:
- EDID changes to support further conversion to struct drm_edid (Jani)
- Move i915 DSC parameter code to common DRM helpers (Dmitry Baryshkov)
Refactoring and cleanups:
- CSC color refactoring (Ville)
- VRR cleanups (Ville)
- Finish i915 conversion to struct drm_edid (Jani)
- Start high level display driver file (Jani)
- Hotplug refactoring (Ville)
- Misc display refactoring and cleanups (Jani, Ville)
- Use device based logging for state checker warnings (Jani)
- Split out hotplug and display irq handling (Jani)
- Move display device info and probe under display/ (Matt)
- HDCP cleanups (Suraj)
- Use localized warning ignores instead of per file (Jani)
- Remove superfluous enum i915_drm_suspend_mode (Maarten)
- PSR, pfit, scaler and chicken register definition cleanups (Ville)
- Constify pointers to hwmon_channel_info (Krzysztof Kozlowski)
- Replace all non-returning strlcpy with strscpy (Azeem Shaikh)
- Refactor VBT aux channel and DDC pin mapping (Ville)
- Include cleanups (Jani)
Fixes:
- Fix modeset locking issue in DP MST HDCP (Suraj)
- Fix disconnected Type-C/DP-alt disable at probe (Imre)
- Fix HDMI PCON DSC usage and color conversions (Ankit)
- Fix g4x HDMI infoframe/audio transmission port usage (Ville)
- Avoid use-after-free when DP connector init fails (Maarten)
- Fix voltage level for 480 MHz CDCLK (Chaitanya)
- Check HPD live state during eDP probe (Ville)
- Fix active port PLL selection for secondary MST streams (Imre)
- Check pipe source size when using SKL+ scalers (Ville)
- Fix MIPI DSI sleep sequences (Hans de Goede)
- Fix DPCD register write order to match 128b/132b requirement (Arun)
- Increase AUX timeout for Type-C (Suraj)
- Communicate display power demands to pcode (Stan)
- Fix potential division by zero in DSC compute config (Nikita Zhandarovich)
- Fix fast wake AUX sync length (Jouni)
- Fix potential oops on intel_get_crtc_new_encoder() (Ville)
Merges:
- drm-next backmerges (Rodrigo, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zg5eat32.fsf@intel.com
Several info ioctls may return success although no data retrieved.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
To comply with the design that buffer objects shall have immutable
cache setting through out their life cycle, {set, get}_caching ioctl's
are no longer supported from MTL onward. With that change caching
policy can only be set at object creation time. The current code
applies a default (platform dependent) cache setting for all objects.
However this is not optimal for performance tuning. The patch extends
the existing gem_create uAPI to let user set PAT index for the object
at creation time.
The new extension is platform independent, so UMD's can switch to using
this extension for older platforms as well, while {set, get}_caching are
still supported on these legacy paltforms for compatibility reason.
However, since PAT index was not clearly defined for platforms prior to
GEN12 (TGL), so we are limiting this externsion to GEN12+ platforms
only. See ext_set_pat() in for the implementation details.
The documentation related to the PAT/MOCS tables is currently available
for Tiger Lake here:
https://www.intel.com/content/www/us/en/docs/graphics-for-linux/developer-reference/1-0/tiger-lake.html
The documentation for other platforms is currently being updated.
BSpec: 45101
Mesa support has been submitted in this merge request:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22878
The media driver supprt has bin submitted in this merge request:
https://github.com/intel/media-driver/pull/1680
The IGT test related to this change is
igt@gem_create@create-ext-set-pat
Signed-off-by: Fei Yang <fei.yang@intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Carl Zhang <carl.zhang@intel.com>
Tested-by: Lihao Gu <lihao.gu@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Slawomir Milczarek <slawomir.milczarek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606100042.482345-2-andi.shyti@linux.intel.com
Before we add the second step of the MTL HuC auth (via GSC), we need to
have the ability to differentiate between them. To do so, the huc
authentication check is duplicated for GuC and GSC auth, with
GSC-enabled binaries being considered fully authenticated only after
the GSC auth step.
To report the difference between the 2 auth steps, a new case is added
to the HuC getparam. This way, the clear media driver can start
submitting before full auth, as partial auth is enough for those
workloads.
v2: fix authentication status check for DG2
v3: add a better comment at the top of the HuC file to explain the
different approaches to load and auth (John)
v4: update call to intel_huc_is_authenticated in the pxp code to check
for GSC authentication
v5: drop references to meu and esclamation mark in huc_auth print (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> #v2
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-5-daniele.ceraolospurio@intel.com
Reserve some bits in the counter config namespace which will carry the
tile id and prepare the code to handle this.
No per tile counters have been added yet.
v2:
- Fix checkpatch issues
- Use 4 bits for gt id in non-engine counters. Drop FIXME.
- Set MAX GTs to 4. Drop FIXME.
v3: (Ashutosh, Tvrtko)
- Drop BUG_ON that would never fire
- Make enable u64
- Pull in some code from next patch
v4: Set I915_PMU_MAX_GTS to 2 (Tvrtko)
v5: s/u64/u32 where needed (Ashutosh)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519154946.3751971-7-umesh.nerlige.ramappa@intel.com
Because of the additional firmware, component-driver and
initialization depedencies required on MTL platform before a
PXP context can be created, UMD calling for PXP creation as a
way to get-caps can take a long time. An actual real world
customer stack has seen this happen in the 4-to-8 second range
after the kernel starts (which sees MESA's init appear in the
middle of this range as the compositor comes up). To avoid
unncessary delays experienced by the UMD for get-caps purposes,
add a GET_PARAM for I915_PARAM_PXP_SUPPORT.
However, some failures can still occur after all the depedencies
are met (such as firmware init flow failure, bios configurations
or SOC fusing not allowing PXP enablement). Those scenarios will
only be known to user space when it attempts creating a PXP context
and is documented in the GEM UAPI headers.
While making this change, create a helper that is common to both
GET_PARAM caller and intel_pxp_start since the latter does
similar checks.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-7-alan.previn.teres.alexis@intel.com
Add MTL's function for ARB session creation using PXP firmware
version 4.3 ABI structure format.
While relooking at the ARB session creation flow in intel_pxp_start,
let's address missing UAPI documentation. Without actually changing
backward compatible behavior, update i915's drm-uapi comments
that describe the possible error values when creating a context
with I915_CONTEXT_PARAM_PROTECTED_CONTENT:
Since the first merge of PXP support on ADL, i915 returns -ENXIO
if a dependency such as firmware or component driver was yet to
be loaded or returns -EIO if the creation attempt failed when
requested by the PXP firmware (specific firmware error responses
are reported in dmesg).
Add MTL's function for ARB session invalidation but this
reuses PXP firmware version 4.2 ABI structure format.
For both cases, in the back-end gsccs functions for sending messages
to the firmware inspect the GSC-CS-Mem-Header's pending-bit which
means the GSC firmware is busy and we should retry.
Given the last hw requirement, lets also update functions in
front-end layer that wait for session creation or teardown
completion to use new worst case timeout periods.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-6-alan.previn.teres.alexis@intel.com
Add UAPI to query the GFX shadow buffer requirements
for preemption on GFX11. UMDs need to specify the shadow
areas for preemption.
v2: move into existing asic info query
drop GDS as its use is determined by the UMD (Marek)
v3: Update comments to note that alignment is base
virtual alignment (Alex)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFX11, the UMD needs to allocate some shadow buffers
to be used for preemption. The UMD allocates the buffers
and passes the GPU virtual address to the kernel since the
kernel will program the packet that specified these
addresses as part of its IB submission frame.
v2: UMD passes shadow init to tell kernel when to initialize
the shadow
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This info would be used by radv to figure out when we need to
split a submission into multiple submissions. radv currently has
a limit of 192 which seems to work for most gfx submissions, but
is way too high for e.g. compute or sdma.
Userspace is available at
https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3
v3: Completely rewrote based on suggestion of making it a separate query.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2498
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
main pull request for v6.4
Core Display:
============
* Bugfixes for error handling during probe
* rework UBWC decoder programming
* prepare_commit cleanup
* bindings for SM8550 (MDSS, DPU), SM8450 (DP)
* timeout calculation fixup
* atomic: use drm_crtc_next_vblank_start() instead of our own
custom thing to calculate the start of next vblank
DP:
==
* interrupts cleanup
DPU:
===
* DSPP sub-block flush on sc7280
* support AR30 in addition to XR30 format
* Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
* Split the HW catalog into individual per-SoC files
DSI:
===
* rework DSI instance ID detection on obscure platforms
GPU:
===
* uapi C++ compatibility fix
* a6xx: More robust gdsc reset
* a3xx and a4xx devfreq support
* update generated headers
* various cleanups and fixes
* GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
* dma-fence deadline hint support and wait-boost
* a640 speedbin support
* a650 speedbin support
Conflicts in drivers/gpu/drm/msm/adreno/adreno_gpu.c:
Conflict between the 7fa5047a43 ("drm: Use of_property_present() for
testing DT property presence") and 9f251f9340 ("drm/msm/adreno: Use
OPP for every GPU generation"). The latter removed the of_ function
call outright, so I went with what's in the PR unchanged.
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwuj5tabyW910+N-B=5kFNAC7QNYoQ=0xi3roBjQvFFQ@mail.gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Add definition of a new Gaudi2 server type. This represents
the connectivity between the cards in that server type.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
