Some sockets suffer from heavy false sharing on sk->sk_drops,
and fields in the same cache line.
Add sk->sk_drop_counters to:
- move the drop counter(s) to dedicated cache lines.
- Add basic NUMA awareness to these drop counter(s).
Following patches will use this infrastructure for UDP and RAW sockets.
sk_clone_lock() is not yet ready, it would need to properly
set newsk->sk_drop_counters if we plan to use this for TCP sockets.
v2: used Paolo suggestion from https://lore.kernel.org/netdev/8f09830a-d83d-43c9-b36b-88ba0a23e9b2@redhat.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Existing sk_drops_add() helper is renamed to sk_drops_skbadd().
Add sk_drops_add() and convert sk_drops_inc() to use it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We want to split sk->sk_drops in the future to reduce
potential contention on this field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch fixes an issue where two different flows on the same RXq
produce the same hash resulting in continuous flow overwrites.
Flow #1: A packet for Flow #1 comes in, kernel calls the steering
function. The driver gives back a filter id. The kernel saves
this filter id in the selected slot. Later, the driver's
service task checks if any filters have expired and then
installs the rule for Flow #1.
Flow #2: A packet for Flow #2 comes in. It goes through the same steps.
But this time, the chosen slot is being used by Flow #1. The
driver gives a new filter id and the kernel saves it in the
same slot. When the driver's service task runs, it runs through
all the flows, checks if Flow #1 should be expired, the kernel
returns True as the slot has a different filter id, and then
the driver installs the rule for Flow #2.
Flow #1: Another packet for Flow #1 comes in. The same thing repeats.
The slot is overwritten with a new filter id for Flow #1.
This causes a repeated cycle of flow programming for missed packets,
wasting CPU cycles while not improving performance. This problem happens
at higher rates when the RPS table is small, but tests show it still
happens even with 12,000 connections and an RPS size of 16K per queue
(global table size = 144x16K = 64K).
This patch prevents overwriting an rps_dev_flow entry if it is active.
The intention is that it is better to do aRFS for the first flow instead
of hurting all flows on the same hash. Without this, two (or more) flows
on one RX queue with the same hash can keep overwriting each other. This
causes the driver to reprogram the flow repeatedly.
Changes:
1. Add a new 'hash' field to struct rps_dev_flow.
2. Add rps_flow_is_active(): a helper function to check if a flow is
active or not, extracted from rps_may_expire_flow(). It is further
simplified as per reviewer feedback.
3. In set_rps_cpu():
- Avoid overwriting by programming a new filter if:
- The slot is not in use, or
- The slot is in use but the flow is not active, or
- The slot has an active flow with the same hash, but target CPU
differs.
- Save the hash in the rps_dev_flow entry.
4. rps_may_expire_flow(): Use earlier extracted rps_flow_is_active().
Testing & results:
- Driver: ice (E810 NIC), Kernel: net-next
- #CPUs = #RXq = 144 (1:1)
- Number of flows: 12K
- Eight RPS settings from 256 to 32768. Though RPS=256 is not ideal,
it is still sufficient to cover 12K flows (256*144 rx-queues = 64K
global table slots)
- Global Table Size = 144 * RPS (effectively equal to 256 * RPS)
- Each RPS test duration = 8 mins (org code) + 8 mins (new code).
- Metrics captured on client
Legend for following tables:
Steer-C: #times ndo_rx_flow_steer() was Called by set_rps_cpu()
Steer-L: #times ice_arfs_flow_steer() Looped over aRFS entries
Add: #times driver actually programmed aRFS (ice_arfs_build_entry())
Del: #times driver deleted the flow (ice_arfs_del_flow_rules())
Units: K = 1,000 times, M = 1 million times
|-------|---------|------| Org Code |---------|---------|
| RPS | Latency | CPU | Add | Del | Steer-C | Steer-L |
|-------|---------|------|--------|--------|---------|---------|
| 256 | 227.0 | 93.2 | 1.6M | 1.6M | 121.7M | 267.6M |
| 512 | 225.9 | 94.1 | 11.5M | 11.2M | 65.7M | 199.6M |
| 1024 | 223.5 | 95.6 | 16.5M | 16.5M | 27.1M | 187.3M |
| 2048 | 222.2 | 96.3 | 10.5M | 10.5M | 12.5M | 115.2M |
| 4096 | 223.9 | 94.1 | 5.5M | 5.5M | 7.2M | 65.9M |
| 8192 | 224.7 | 92.5 | 2.7M | 2.7M | 3.0M | 29.9M |
| 16384 | 223.5 | 92.5 | 1.3M | 1.3M | 1.4M | 13.9M |
| 32768 | 219.6 | 93.2 | 838.1K | 838.1K | 965.1K | 8.9M |
|-------|---------|------| New Code |---------|---------|
| 256 | 201.5 | 99.1 | 13.4K | 5.0K | 13.7K | 75.2K |
| 512 | 202.5 | 98.2 | 11.2K | 5.9K | 11.2K | 55.5K |
| 1024 | 207.3 | 93.9 | 11.5K | 9.7K | 11.5K | 59.6K |
| 2048 | 207.5 | 96.7 | 11.8K | 11.1K | 15.5K | 79.3K |
| 4096 | 206.9 | 96.6 | 11.8K | 11.7K | 11.8K | 63.2K |
| 8192 | 205.8 | 96.7 | 11.9K | 11.8K | 11.9K | 63.9K |
| 16384 | 200.9 | 98.2 | 11.9K | 11.9K | 11.9K | 64.2K |
| 32768 | 202.5 | 98.0 | 11.9K | 11.9K | 11.9K | 64.2K |
|-------|---------|------|--------|--------|---------|---------|
Some observations:
1. Overall Latency improved: (1790.19-1634.94)/1790.19*100 = 8.67%
2. Overall CPU increased: (777.32-751.49)/751.45*100 = 3.44%
3. Flow Management (add/delete) remained almost constant at ~11K
compared to values in millions.
Signed-off-by: Krishna Kumar <krikku@gmail.com>
Link: https://patch.msgid.link/20250825031005.3674864-2-krikku@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'use' field in struct rose_neigh is used as a reference counter but
lacks atomicity. This can lead to race conditions where a rose_neigh
structure is freed while still being referenced by other code paths.
For example, when rose_neigh->use becomes zero during an ioctl operation
via rose_rt_ioctl(), the structure may be removed while its timer is
still active, potentially causing use-after-free issues.
This patch changes the type of 'use' from unsigned short to refcount_t and
updates all code paths to use rose_neigh_hold() and rose_neigh_put() which
operate reference counts atomically.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Takamitsu Iwai <takamitz@amazon.co.jp>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250823085857.47674-3-takamitz@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current rose_remove_neigh() performs two distinct operations:
1. Removes rose_neigh from rose_neigh_list
2. Frees the rose_neigh structure
Split these operations into separate functions to improve maintainability
and prepare for upcoming refcount_t conversion. The timer cleanup remains
in rose_remove_neigh() because free operations can be called from timer
itself.
This patch introduce rose_neigh_put() to handle the freeing of rose_neigh
structures and modify rose_remove_neigh() to handle removal only.
Signed-off-by: Takamitsu Iwai <takamitz@amazon.co.jp>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250823085857.47674-2-takamitz@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare the HMAC key when it is added to the kernel, instead of
preparing it implicitly for every packet. This significantly improves
the performance of seg6_hmac_compute(). A microbenchmark on x86_64
shows seg6_hmac_compute() (with HMAC-SHA256) dropping from ~1978 cycles
to ~1419 cycles, a 28% improvement.
The size of 'struct seg6_hmac_info' increases by 128 bytes, but that
should be fine, since there should not be a massive number of keys.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250824013644.71928-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the HMAC-SHA1 and HMAC-SHA256 library functions instead of
crypto_shash. This is simpler and faster. Pre-allocating per-CPU hash
transformation objects and descriptors is no longer needed, and a
microbenchmark on x86_64 shows seg6_hmac_compute() (with HMAC-SHA256)
dropping from ~2494 cycles to ~1978 cycles, a 20% improvement.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250824013644.71928-2-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the ->flowic_tos field of struct flowi_common from __u8 to
dscp_t, rename it ->flowic_dscp and propagate these changes to struct
flowi and struct flowi4.
We've had several bugs in the past where ECN bits could interfere with
IPv4 routing, because these bits were not properly cleared when setting
->flowi4_tos. These bugs should be fixed now and the dscp_t type has
been introduced to ensure that variables carrying DSCP values don't
accidentally have any ECN bits set. Several variables and structure
fields have been converted to dscp_t already, but the main IPv4 routing
structure, struct flowi4, is still using a __u8. To avoid any future
regression, this patch converts it to dscp_t.
There are many users to convert at once. Fortunately, around half of
->flowi4_tos users already have a dscp_t value at hand, which they
currently convert to __u8 using inet_dscp_to_dsfield(). For all of
these users, we just need to drop that conversion.
But, although we try to do the __u8 <-> dscp_t conversions at the
boundaries of the network or of user space, some places still store
TOS/DSCP variables as __u8 in core networking code. Those can hardly be
converted either because the data structure is part of UAPI or because
the same variable or field is also used for handling ECN in other parts
of the code. In all of these cases where we don't have a dscp_t
variable at hand, we need to use inet_dsfield_to_dscp() when
interacting with ->flowi4_dscp.
Changes since v1:
* Fix space alignment in __bpf_redirect_neigh_v4() (Ido).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/29acecb45e911d17446b9a3dbdb1ab7b821ea371.1756128932.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the devlink health reporter starts the grace period
immediately after handling an error, blocking any further recoveries
until it finished.
However, when a single root cause triggers multiple errors in a short
time frame, it is desirable to treat them as a bulk of errors and to
allow their recoveries, avoiding premature blocking of subsequent
related errors, and reducing the risk of inconsistent or incomplete
error handling.
To address this, introduce a configurable burst period for devlink
health reporter. Start this period when the first error is handled,
and allow recovery attempts for reported errors during this window.
Once burst period expires, begin the grace period to block further
recoveries until it concludes.
Timeline summary:
----|--------|------------------------------/----------------------/--
error is error is burst period grace period
reported recovered (recoveries allowed) (recoveries blocked)
For calculating the burst period duration, use the same
last_recovery_ts as the grace period. Update it on recovery only
when the burst period is inactive (either disabled or at the
first error).
This patch implements the framework for the burst period and
effectively sets its value to 0 at reporter creation, so the current
behavior remains unchanged, which ensures backward compatibility.
A downstream patch will make the burst period configurable.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250824084354.533182-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the default graceful period from a parameter to
devlink_health_reporter_create() to a field in the
devlink_health_reporter_ops structure.
This change improves consistency, as the graceful period is inherently
tied to the reporter's behavior and recovery policy. It simplifies the
signature of devlink_health_reporter_create() and its internal helper
functions. It also centralizes the reporter configuration at the ops
structure, preparing the groundwork for a downstream patch that will
introduce a devlink health reporter burst period attribute whose
default value will similarly be provided by the driver via the ops
structure.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250824084354.533182-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These socket lookup functions required struct inet_hashinfo because
they are shared by TCP and DCCP.
* __inet_lookup_established()
* __inet_lookup_listener()
* __inet6_lookup_established()
* inet6_lookup_listener()
DCCP has gone, and we don't need to pass hashinfo down to them.
Let's fetch net->ipv4.tcp_death_row.hashinfo directly in the above
4 functions.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250822190803.540788-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since DCCP has been removed, sk->sk_prot->twsk_prot->twsk_destructor
is always tcp_twsk_destructor().
Let's call tcp_twsk_destructor() directly in inet_twsk_free() and
remove ->twsk_destructor().
While at it, tcp_twsk_destructor() is un-exported.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250822190803.540788-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Function set_name_sync() uses hdev->dev_name field to send
HCI_OP_WRITE_LOCAL_NAME command, but copying from data to hdev->dev_name
is called after mgmt cmd was queued, so it is possible that function
set_name_sync() will read old name value.
This change adds name as a parameter for function hci_update_name_sync()
to avoid race condition.
Fixes: 6f6ff38a1e ("Bluetooth: hci_sync: Convert MGMT_OP_SET_LOCAL_NAME")
Signed-off-by: Pavel Shpakovskiy <pashpakovskii@salutedevices.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is a page_pool_put() function but no get equivalent.
Having multiple references to a page pool is quite useful.
It avoids branching in create / destroy paths in drivers
which support memory providers.
Use the new helper in bnxt.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250820025704.166248-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The port's actor_oper_port_state activity flag should be updated immediately
after changing the lacp_active option to reflect the current mode correctly.
Fixes: 3a755cd8b7 ("bonding: add new option lacp_active")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250815062000.22220-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert SCTP cookies to use HMAC-SHA256, instead of the previous choice
of the legacy algorithms HMAC-MD5 and HMAC-SHA1. Simplify and optimize
the code by using the HMAC-SHA256 library instead of crypto_shash, and
by preparing the HMAC key when it is generated instead of per-operation.
This doesn't break compatibility, since the cookie format is an
implementation detail, not part of the SCTP protocol itself.
Note that the cookie size doesn't change either. The HMAC field was
already 32 bytes, even though previously at most 20 bytes were actually
compared. 32 bytes exactly fits an untruncated HMAC-SHA256 value. So,
although we could safely truncate the MAC to something slightly shorter,
for now just keep the cookie size the same.
I also considered SipHash, but that would generate only 8-byte MACs. An
8-byte MAC *might* suffice here. However, there's quite a lot of
information in the SCTP cookies: more than in TCP SYN cookies. So
absent an analysis that occasional forgeries of all that information is
okay in SCTP, I errored on the side of caution.
Remove HMAC-MD5 and HMAC-SHA1 as options, since the new HMAC-SHA256
option is just better. It's faster as well as more secure. For
example, benchmarking on x86_64, cookie authentication is now nearly 3x
as fast as the previous default choice and implementation of HMAC-MD5.
Also just make the kernel always support cookie authentication if SCTP
is supported at all, rather than making it optional in the build. (It
was sort of optional before, but it didn't really work properly. E.g.,
a kernel with CONFIG_SCTP_COOKIE_HMAC_MD5=n still supported HMAC-MD5
cookie authentication if CONFIG_CRYPTO_HMAC and CONFIG_CRYPTO_MD5
happened to be enabled in the kconfig for other reasons.)
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250818205426.30222-5-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For SCTP chunk authentication, use the HMAC-SHA1 and HMAC-SHA256 library
functions instead of crypto_shash. This is simpler and faster. There's
no longer any need to pre-allocate 'crypto_shash' objects; the SCTP code
now simply calls into the HMAC code directly.
As part of this, make SCTP always support both HMAC-SHA1 and
HMAC-SHA256. Previously, it only guaranteed support for HMAC-SHA1.
However, HMAC-SHA256 tended to be supported too anyway, as it was
supported if CONFIG_CRYPTO_SHA256 was enabled elsewhere in the kconfig.
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250818205426.30222-4-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Except for sk_clone_lock(), all accesses to sk->sk_memcg
is done under CONFIG_MEMCG.
As a bonus, let's define sk->sk_memcg under CONFIG_MEMCG.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will store a flag in the lowest bit of sk->sk_memcg.
Then, we cannot pass the raw pointer to mem_cgroup_under_socket_pressure().
Let's pass struct sock to it and rename the function to match other
functions starting with mem_cgroup_sk_.
Note that the helper is moved to sock.h to use mem_cgroup_from_sk().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The socket memcg feature is enabled by a static key and
only works for non-root cgroup.
We check both conditions in many places.
Let's factorise it as a helper function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will store a flag in the lowest bit of sk->sk_memcg.
Then, directly dereferencing sk->sk_memcg will be illegal, and we
do not want to allow touching the raw sk->sk_memcg in many places.
Let's introduce mem_cgroup_from_sk().
Other places accessing the raw sk->sk_memcg will be converted later.
Note that we cannot define the helper as an inline function in
memcontrol.h as we cannot access any fields of struct sock there
due to circular dependency, so it is placed in sock.h.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch enhances RX buffer handling in the mana driver by allocating
pages from a page pool and slicing them into MTU-sized fragments, rather
than dedicating a full page per packet. This approach is especially
beneficial on systems with large base page sizes like 64KB.
Key improvements:
- Proper integration of page pool for RX buffer allocations.
- MTU-sized buffer slicing to improve memory utilization.
- Reduce overall per Rx queue memory footprint.
- Automatic fallback to full-page buffers when:
* Jumbo frames are enabled (MTU > PAGE_SIZE / 2).
* The XDP path is active, to avoid complexities with fragment reuse.
Testing on VMs with 64KB pages shows around 200% throughput improvement.
Memory efficiency is significantly improved due to reduced wastage in page
allocations. Example: We are now able to fit 35 rx buffers in a single 64kb
page for MTU size of 1500, instead of 1 rx buffer per page previously.
Tested:
- iperf3, iperf2, and nttcp benchmarks.
- Jumbo frames with MTU 9000.
- Native XDP programs (XDP_PASS, XDP_DROP, XDP_TX, XDP_REDIRECT) for
testing the XDP path in driver.
- Memory leak detection (kmemleak).
- Driver load/unload, reboot, and stress scenarios.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20250814140410.GA22089@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This fixes the likes of hci_conn_num(CIS_LINK) returning the total of
ISO connection which includes BIS_LINK as well, so this splits the
iso_num into each link type and introduces hci_iso_num that can be used
in places where the total number of ISO connection still needs to be
used.
Fixes: 23205562ff ("Bluetooth: separate CIS_LINK and BIS_LINK link types")
Fixes: a7bcffc673 ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ll_privacy_capable only indicates that the controller supports the
feature but it doesnt' check that LE is enabled so it end up being
marked as active in the current settings when it shouldn't.
Fixes: ad383c2c65 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
{cis,bis}_capable only indicates the controller supports the feature
since it doesn't check that LE is enabled so it shall not be used for
current setting, instead this introduces {cis,bis}_enabled macros that
can be used to indicate that these features are currently enabled.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Fixes: ae75336131 ("Bluetooth: Check for ISO support in controller")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This issue applies for the following qdiscs: hhf, fq, fq_codel, and
fq_pie, and occurs in their change handlers when adjusting to the new
limit. The problem is the following in the values passed to the
subsequent qdisc_tree_reduce_backlog call given a tbf parent:
When the tbf parent runs out of tokens, skbs of these qdiscs will
be placed in gso_skb. Their peek handlers are qdisc_peek_dequeued,
which accounts for both qlen and backlog. However, in the case of
qdisc_dequeue_internal, ONLY qlen is accounted for when pulling
from gso_skb. This means that these qdiscs are missing a
qdisc_qstats_backlog_dec when dropping packets to satisfy the
new limit in their change handlers.
One can observe this issue with the following (with tc patched to
support a limit of 0):
export TARGET=fq
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: tbf rate 8bit burst 100b latency 1ms
tc qdisc replace dev lo handle 3: parent 1:1 $TARGET limit 1000
echo ''; echo 'add child'; tc -s -d qdisc show dev lo
ping -I lo -f -c2 -s32 -W0.001 127.0.0.1 2>&1 >/dev/null
echo ''; echo 'after ping'; tc -s -d qdisc show dev lo
tc qdisc change dev lo handle 3: parent 1:1 $TARGET limit 0
echo ''; echo 'after limit drop'; tc -s -d qdisc show dev lo
tc qdisc replace dev lo handle 2: parent 1:1 sfq
echo ''; echo 'post graft'; tc -s -d qdisc show dev lo
The second to last show command shows 0 packets but a positive
number (74) of backlog bytes. The problem becomes clearer in the
last show command, where qdisc_purge_queue triggers
qdisc_tree_reduce_backlog with the positive backlog and causes an
underflow in the tbf parent's backlog (4096 Mb instead of 0).
To fix this issue, the codepath for all clients of qdisc_dequeue_internal
has been simplified: codel, pie, hhf, fq, fq_pie, and fq_codel.
qdisc_dequeue_internal handles the backlog adjustments for all cases that
do not directly use the dequeue handler.
The old fq_codel_change limit adjustment loop accumulated the arguments to
the subsequent qdisc_tree_reduce_backlog call through the cstats field.
However, this is confusing and error prone as fq_codel_dequeue could also
potentially mutate this field (which qdisc_dequeue_internal calls in the
non gso_skb case), so we have unified the code here with other qdiscs.
Fixes: 2d3cbfd6d5 ("net_sched: Flush gso_skb list too during ->change()")
Fixes: 4b549a2ef4 ("fq_codel: Fair Queue Codel AQM")
Fixes: 10239edf86 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250812235725.45243-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Constify the devlink port attributes to indicate they are read only
and does not depend on anything else. Therefore, validate it early
before setting in the devlink port.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://patch.msgid.link/20250813094417.7269-3-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ixgbe: bypass devlink phys_port_name generation
Jedrzej adds option to skip phys_port_name generation and opts
ixgbe into it as some configurations rely on pre-devlink naming
which could end up broken as a result.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
====================
Link: https://patch.msgid.link/20250812205226.1984369-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.
However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.
Fix this with using the appropriate kthread's API.
Fixes: d1a8919758 ("kthread: Default affine kthread to its preferred NUMA node")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Currently when adding devlink port, phys_port_name is automatically
generated within devlink port initialization flow. As a result adding
devlink port support to driver may result in forced changes of interface
names, which breaks already existing network configs.
This is an expected behavior but in some scenarios it would not be
preferable to provide such limitation for legacy driver not being able to
keep 'pre-devlink' interface name.
Add flag no_phys_port_name to devlink_port_attrs struct which indicates
if devlink should not alter name of interface.
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/all/nbwrfnjhvrcduqzjl4a2jafnvvud6qsbxlvxaxilnryglf4j7r@btuqrimnfuly/
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Page pool can have pages "directly" (locklessly) recycled to it,
if the NAPI that owns the page pool is scheduled to run on the same CPU.
To make this safe we check that the NAPI is disabled while we destroy
the page pool. In most cases NAPI and page pool lifetimes are tied
together so this happens naturally.
The queue API expects the following order of calls:
-> mem_alloc
alloc new pp
-> stop
napi_disable
-> start
napi_enable
-> mem_free
free old pp
Here we allocate the page pool in ->mem_alloc and free in ->mem_free.
But the NAPIs are only stopped between ->stop and ->start. We created
page_pool_disable_direct_recycling() to safely shut down the recycling
in ->stop. This way the page_pool_destroy() call in ->mem_free doesn't
have to worry about recycling any more.
Unfortunately, the page_pool_disable_direct_recycling() is not enough
to deal with failures which necessitate freeing the _new_ page pool.
If we hit a failure in ->mem_alloc or ->stop the new page pool has
to be freed while the NAPI is active (assuming driver attaches the
page pool to an existing NAPI instance and doesn't reallocate NAPIs).
Freeing the new page pool is technically safe because it hasn't been
used for any packets, yet, so there can be no recycling. But the check
in napi_assert_will_not_race() has no way of knowing that. We could
check if page pool is empty but that'd make the check much less likely
to trigger during development.
Add page_pool_enable_direct_recycling(), pairing with
page_pool_disable_direct_recycling(). It will allow us to create the new
page pools in "disabled" state and only enable recycling when we know
the reconfig operation will not fail.
Coincidentally it will also let us re-enable the recycling for the old
pool, if the reconfig failed:
-> mem_alloc (new)
-> stop (old)
# disables direct recycling for old
-> start (new)
# fail!!
-> start (old)
# go back to old pp but direct recycling is lost :(
-> mem_free (new)
The new helper is idempotent to make the life easier for drivers,
which can operate in HDS mode and support zero-copy Rx.
The driver can call the helper twice whether there are two pools
or it has multiple references to a single pool.
Fixes: 40eca00ae6 ("bnxt_en: unlink page pool when stopping Rx queue")
Tested-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250805003654.2944974-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- netlink: avoid infinite retry looping in netlink_unicast()
Previous releases - always broken:
- packet: fix a race in packet_set_ring() and packet_notifier()
- ipv6: reject malicious packets in ipv6_gso_segment()
- sched: mqprio: fix stack out-of-bounds write in tc entry parsing
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- number of device tree / OF reference leak fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=nwy7
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Previous releases - regressions:
- netlink: avoid infinite retry looping in netlink_unicast()
Previous releases - always broken:
- packet: fix a race in packet_set_ring() and packet_notifier()
- ipv6: reject malicious packets in ipv6_gso_segment()
- sched: mqprio: fix stack out-of-bounds write in tc entry parsing
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- a number of device tree / OF reference leak fixes"
* tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
pptp: fix pptp_xmit() error path
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
net: Update threaded state in napi config in netif_set_threaded
selftests: netdevsim: Xfail nexthop test on slow machines
eth: fbnic: Lock the tx_dropped update
eth: fbnic: Fix tx_dropped reporting
eth: fbnic: remove the debugging trick of super high page bias
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
dt-bindings: net: Replace bouncing Alexandru Tachici emails
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
Revert "net: mdio_bus: Use devm for getting reset GPIO"
selftests: net: packetdrill: xfail all problems on slow machines
net/packet: fix a race in packet_set_ring() and packet_notifier()
benet: fix BUG when creating VFs
net: airoha: npu: Add missing MODULE_FIRMWARE macros
net: devmem: fix DMA direction on unmapping
ipa: fix compile-testing with qcom-mdt=m
eth: fbnic: unlink NAPIs from queues on error to open
net: Add locking to protect skb->dev access in ip_output
...
- Fix a shortcut key issue in menuconfig
- Fix missing rebuild of kheaders
- Sort the symbol dump generated by gendwarfsyms
- Support zboot extraction in scripts/extract-vmlinux
- Migrate gconfig to GTK 3
- Add TAR variable to allow overriding the default tar command
- Hand over Kbuild maintainership
-----BEGIN PGP SIGNATURE-----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=MtyJ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"This is the last pull request from me.
I'm grateful to have been able to continue as a maintainer for eight
years. From the next cycle, Nathan and Nicolas will maintain Kbuild.
- Fix a shortcut key issue in menuconfig
- Fix missing rebuild of kheaders
- Sort the symbol dump generated by gendwarfsyms
- Support zboot extraction in scripts/extract-vmlinux
- Migrate gconfig to GTK 3
- Add TAR variable to allow overriding the default tar command
- Hand over Kbuild maintainership"
* tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (92 commits)
MAINTAINERS: hand over Kbuild maintenance
kheaders: make it possible to override TAR
kbuild: userprogs: use correct linker when mixing clang and GNU ld
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c
kconfig: lxdialog: replace strcpy with snprintf in print_autowrap
kconfig: gconf: refactor text_insert_help()
kconfig: gconf: remove unneeded variable in text_insert_msg
kconfig: gconf: use hyphens in signals
kconfig: gconf: replace GtkImageMenuItem with GtkMenuItem
kconfig: gconf: Fix Back button behavior
kconfig: gconf: fix single view to display dependent symbols correctly
scripts: add zboot support to extract-vmlinux
gendwarfksyms: order -T symtypes output by name
gendwarfksyms: use preferred form of sizeof for allocation
kconfig: qconf: confine {begin,end}Group to constructor and destructor
kconfig: qconf: fix ConfigList::updateListAllforAll()
kconfig: add a function to dump all menu entries in a tree-like format
kconfig: gconf: show GTK version in About dialog
kconfig: gconf: replace GtkHPaned and GtkVPaned with GtkPaned
kconfig: gconf: replace GdkColor with GdkRGBA
...
In ip_output() skb->dev is updated from the skb_dst(skb)->dev
this can become invalid when the interface is unregistered and freed,
Introduced new skb_dst_dev_rcu() function to be used instead of
skb_dst_dev() within rcu_locks in ip_output.This will ensure that
all the skb's associated with the dev being deregistered will
be transnmitted out first, before freeing the dev.
Given that ip_output() is called within an rcu_read_lock()
critical section or from a bottom-half context, it is safe to introduce
an RCU read-side critical section within it.
Multiple panic call stacks were observed when UL traffic was run
in concurrency with device deregistration from different functions,
pasting one sample for reference.
[496733.627565][T13385] Call trace:
[496733.627570][T13385] bpf_prog_ce7c9180c3b128ea_cgroupskb_egres+0x24c/0x7f0
[496733.627581][T13385] __cgroup_bpf_run_filter_skb+0x128/0x498
[496733.627595][T13385] ip_finish_output+0xa4/0xf4
[496733.627605][T13385] ip_output+0x100/0x1a0
[496733.627613][T13385] ip_send_skb+0x68/0x100
[496733.627618][T13385] udp_send_skb+0x1c4/0x384
[496733.627625][T13385] udp_sendmsg+0x7b0/0x898
[496733.627631][T13385] inet_sendmsg+0x5c/0x7c
[496733.627639][T13385] __sys_sendto+0x174/0x1e4
[496733.627647][T13385] __arm64_sys_sendto+0x28/0x3c
[496733.627653][T13385] invoke_syscall+0x58/0x11c
[496733.627662][T13385] el0_svc_common+0x88/0xf4
[496733.627669][T13385] do_el0_svc+0x2c/0xb0
[496733.627676][T13385] el0_svc+0x2c/0xa4
[496733.627683][T13385] el0t_64_sync_handler+0x68/0xb4
[496733.627689][T13385] el0t_64_sync+0x1a4/0x1a8
Changes in v3:
- Replaced WARN_ON() with WARN_ON_ONCE(), as suggested by Willem de Bruijn.
- Dropped legacy lines mistakenly pulled in from an outdated branch.
Changes in v2:
- Addressed review comments from Eric Dumazet
- Used READ_ONCE() to prevent potential load/store tearing
- Added skb_dst_dev_rcu() and used along with rcu_read_lock() in ip_output
Signed-off-by: Sharath Chandra Vurukala <quic_sharathv@quicinc.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250730105118.GA26100@hu-sharathv-hyd.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When sending a packet with virtio_net_hdr to tun device, if the gso_type
in virtio_net_hdr is SKB_GSO_UDP and the gso_size is less than udphdr
size, below crash may happen.
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:4572!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 62 Comm: mytest Not tainted 6.16.0-rc7 #203 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:skb_pull_rcsum+0x8e/0xa0
Code: 00 00 5b c3 cc cc cc cc 8b 93 88 00 00 00 f7 da e8 37 44 38 00 f7 d8 89 83 88 00 00 00 48 8b 83 c8 00 00 00 5b c3 cc cc cc cc <0f> 0b 0f 0b 66 66 2e 0f 1f 84 00 000
RSP: 0018:ffffc900001fba38 EFLAGS: 00000297
RAX: 0000000000000004 RBX: ffff8880040c1000 RCX: ffffc900001fb948
RDX: ffff888003e6d700 RSI: 0000000000000008 RDI: ffff88800411a062
RBP: ffff8880040c1000 R08: 0000000000000000 R09: 0000000000000001
R10: ffff888003606c00 R11: 0000000000000001 R12: 0000000000000000
R13: ffff888004060900 R14: ffff888004050000 R15: ffff888004060900
FS: 000000002406d3c0(0000) GS:ffff888084a19000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000040 CR3: 0000000004007000 CR4: 00000000000006f0
Call Trace:
<TASK>
udp_queue_rcv_one_skb+0x176/0x4b0 net/ipv4/udp.c:2445
udp_queue_rcv_skb+0x155/0x1f0 net/ipv4/udp.c:2475
udp_unicast_rcv_skb+0x71/0x90 net/ipv4/udp.c:2626
__udp4_lib_rcv+0x433/0xb00 net/ipv4/udp.c:2690
ip_protocol_deliver_rcu+0xa6/0x160 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x72/0x90 net/ipv4/ip_input.c:233
ip_sublist_rcv_finish+0x5f/0x70 net/ipv4/ip_input.c:579
ip_sublist_rcv+0x122/0x1b0 net/ipv4/ip_input.c:636
ip_list_rcv+0xf7/0x130 net/ipv4/ip_input.c:670
__netif_receive_skb_list_core+0x21d/0x240 net/core/dev.c:6067
netif_receive_skb_list_internal+0x186/0x2b0 net/core/dev.c:6210
napi_complete_done+0x78/0x180 net/core/dev.c:6580
tun_get_user+0xa63/0x1120 drivers/net/tun.c:1909
tun_chr_write_iter+0x65/0xb0 drivers/net/tun.c:1984
vfs_write+0x300/0x420 fs/read_write.c:593
ksys_write+0x60/0xd0 fs/read_write.c:686
do_syscall_64+0x50/0x1c0 arch/x86/entry/syscall_64.c:63
</TASK>
To trigger gso segment in udp_queue_rcv_skb(), we should also set option
UDP_ENCAP_ESPINUDP to enable udp_sk(sk)->encap_rcv. When the encap_rcv
hook return 1 in udp_queue_rcv_one_skb(), udp_csum_pull_header() will try
to pull udphdr, but the skb size has been segmented to gso size, which
leads to this crash.
Previous commit cf329aa42b ("udp: cope with UDP GRO packet misdirection")
introduces segmentation in UDP receive path only for GRO, which was never
intended to be used for UFO, so drop UFO packets in udp_rcv_segment().
Link: https://lore.kernel.org/netdev/20250724083005.3918375-1-wangliang74@huawei.com/
Link: https://lore.kernel.org/netdev/20250729123907.3318425-1-wangliang74@huawei.com/
Fixes: cf329aa42b ("udp: cope with UDP GRO packet misdirection")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250730101458.3470788-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/O3j
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Remove usermode driver (UMD) framework (Thomas Weißschuh)
- Introduce Strongly Connected Component (SCC) in the verifier to
detect loops and refine register liveness (Eduard Zingerman)
- Allow 'void *' cast using bpf_rdonly_cast() and corresponding
'__arg_untrusted' for global function parameters (Eduard Zingerman)
- Improve precision for BPF_ADD and BPF_SUB operations in the verifier
(Harishankar Vishwanathan)
- Teach the verifier that constant pointer to a map cannot be NULL
(Ihor Solodrai)
- Introduce BPF streams for error reporting of various conditions
detected by BPF runtime (Kumar Kartikeya Dwivedi)
- Teach the verifier to insert runtime speculation barrier (lfence on
x86) to mitigate speculative execution instead of rejecting the
programs (Luis Gerhorst)
- Various improvements for 'veristat' (Mykyta Yatsenko)
- For CONFIG_DEBUG_KERNEL config warn on internal verifier errors to
improve bug detection by syzbot (Paul Chaignon)
- Support BPF private stack on arm64 (Puranjay Mohan)
- Introduce bpf_cgroup_read_xattr() kfunc to read xattr of cgroup's
node (Song Liu)
- Introduce kfuncs for read-only string opreations (Viktor Malik)
- Implement show_fdinfo() for bpf_links (Tao Chen)
- Reduce verifier's stack consumption (Yonghong Song)
- Implement mprog API for cgroup-bpf programs (Yonghong Song)
* tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (192 commits)
selftests/bpf: Migrate fexit_noreturns case into tracing_failure test suite
selftests/bpf: Add selftest for attaching tracing programs to functions in deny list
bpf: Add log for attaching tracing programs to functions in deny list
bpf: Show precise rejected function when attaching fexit/fmod_ret to __noreturn functions
bpf: Fix various typos in verifier.c comments
bpf: Add third round of bounds deduction
selftests/bpf: Test invariants on JSLT crossing sign
selftests/bpf: Test cross-sign 64bits range refinement
selftests/bpf: Update reg_bound range refinement logic
bpf: Improve bounds when s64 crosses sign boundary
bpf: Simplify bounds refinement from s32
selftests/bpf: Enable private stack tests for arm64
bpf, arm64: JIT support for private stack
bpf: Move bpf_jit_get_prog_name() to core.c
bpf, arm64: Fix fp initialization for exception boundary
umd: Remove usermode driver framework
bpf/preload: Don't select USERMODE_DRIVER
selftests/bpf: Fix test dynptr/test_dynptr_memset_xdp_chunks failure
selftests/bpf: Fix test dynptr/test_dynptr_copy_xdp failure
selftests/bpf: Increase xdp data size for arm64 64K page size
...
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
-----BEGIN PGP SIGNATURE-----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=EGH5
-----END PGP SIGNATURE-----
Merge tag 'for-6.17/io_uring-20250728' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Optimization to avoid reference counts on non-cloned registered
buffers. This is how these buffers were handled prior to having
cloning support, and we can still use that approach as long as the
buffers haven't been cloned to another ring.
- Cleanup and improvement for uring_cmd, where btrfs was the only user
of storing allocated data for the lifetime of the uring_cmd. Clean
that up so we can get rid of the need to do that.
- Avoid unnecessary memory copies in uring_cmd usage. This is
particularly important as a lot of uring_cmd usage necessitates the
use of 128b SQEs.
- A few updates for recv multishot, where it's now possible to add
fairness limits for limiting how much is transferred for each retry
loop. Additionally, recv multishot now supports an overall cap as
well, where once reached the multishot recv will terminate. The
latter is useful for buffer management and juggling many recv streams
at the same time.
- Add support for returning the TX timestamps via a new socket command.
This feature can work in either singleshot or multishot mode, where
the latter triggers a completion whenever new timestamps are
available. This is an alternative to using the existing error queue.
- Add support for an io_uring "mock" file, which is the start of being
able to do 100% targeted testing in terms of exercising io_uring
request handling. The idea is to have a file type that can be
anything the tester would like, and behave exactly how you want it to
behave in terms of hitting the code paths you want.
- Improve zcrx by using sgtables to de-duplicate and improve dma
address handling.
- Prep work for supporting larger pages for zcrx.
- Various little improvements and fixes.
* tag 'for-6.17/io_uring-20250728' of git://git.kernel.dk/linux: (42 commits)
io_uring/zcrx: fix leaking pages on sg init fail
io_uring/zcrx: don't leak pages on account failure
io_uring/zcrx: fix null ifq on area destruction
io_uring: fix breakage in EXPERT menu
io_uring/cmd: remove struct io_uring_cmd_data
btrfs/ioctl: store btrfs_uring_encoded_data in io_btrfs_cmd
io_uring/cmd: introduce IORING_URING_CMD_REISSUE flag
io_uring/zcrx: account area memory
io_uring: export io_[un]account_mem
io_uring/net: Support multishot receive len cap
io_uring: deduplicate wakeup handling
io_uring/net: cast min_not_zero() type
io_uring/poll: cleanup apoll freeing
io_uring/net: allow multishot receive per-invocation cap
io_uring/net: move io_sr_msg->retry_flags to io_sr_msg->flags
io_uring/net: use passed in 'len' in io_recv_buf_select()
io_uring/zcrx: prepare fallback for larger pages
io_uring/zcrx: assert area type in io_zcrx_iov_page
io_uring/zcrx: allocate sgtable for umem areas
io_uring/zcrx: introduce io_populate_area_dma
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCiQAKCRCRxhvAZXjc
orltAQDq3y1anYETz5/FD6P2gXY1W5hXdSm3EHHeacQ1JjTXvgEA2g1lWO7J4anf
oOVE8aSvMow/FOjivLZBYmI65pkYJAE=
=oDKB
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs updates from Christian Brauner:
- persistent info
Persist exit and coredump information independent of whether anyone
currently holds a pidfd for the struct pid.
The current scheme allocated pidfs dentries on-demand repeatedly.
This scheme is reaching it's limits as it makes it impossible to pin
information that needs to be available after the task has exited or
coredumped and that should not be lost simply because the pidfd got
closed temporarily. The next opener should still see the stashed
information.
This is also a prerequisite for supporting extended attributes on
pidfds to allow attaching meta information to them.
If someone opens a pidfd for a struct pid a pidfs dentry is allocated
and stashed in pid->stashed. Once the last pidfd for the struct pid
is closed the pidfs dentry is released and removed from pid->stashed.
So if 10 callers create a pidfs dentry for the same struct pid
sequentially, i.e., each closing the pidfd before the other creates a
new one then a new pidfs dentry is allocated every time.
Because multiple tasks acquiring and releasing a pidfd for the same
struct pid can race with each another a task may still find a valid
pidfs entry from the previous task in pid->stashed and reuse it. Or
it might find a dead dentry in there and fail to reuse it and so
stashes a new pidfs dentry. Multiple tasks may race to stash a new
pidfs dentry but only one will succeed, the other ones will put their
dentry.
The current scheme aims to ensure that a pidfs dentry for a struct
pid can only be created if the task is still alive or if a pidfs
dentry already existed before the task was reaped and so exit
information has been was stashed in the pidfs inode.
That's great except that it's buggy. If a pidfs dentry is stashed in
pid->stashed after pidfs_exit() but before __unhash_process() is
called we will return a pidfd for a reaped task without exit
information being available.
The pidfds_pid_valid() check does not guard against this race as it
doens't sync at all with pidfs_exit(). The pid_has_task() check might
be successful simply because we're before __unhash_process() but
after pidfs_exit().
Introduce a new scheme where the lifetime of information associated
with a pidfs entry (coredump and exit information) isn't bound to the
lifetime of the pidfs inode but the struct pid itself.
The first time a pidfs dentry is allocated for a struct pid a struct
pidfs_attr will be allocated which will be used to store exit and
coredump information.
If all pidfs for the pidfs dentry are closed the dentry and inode can
be cleaned up but the struct pidfs_attr will stick until the struct
pid itself is freed. This will ensure minimal memory usage while
persisting relevant information.
The new scheme has various advantages. First, it allows to close the
race where we end up handing out a pidfd for a reaped task for which
no exit information is available. Second, it minimizes memory usage.
Third, it allows to remove complex lifetime tracking via dentries
when registering a struct pid with pidfs. There's no need to get or
put a reference. Instead, the lifetime of exit and coredump
information associated with a struct pid is bound to the lifetime of
struct pid itself.
- extended attributes
Now that we have a way to persist information for pidfs dentries we
can start supporting extended attributes on pidfds. This will allow
userspace to attach meta information to tasks.
One natural extension would be to introduce a custom pidfs.* extended
attribute space and allow for the inheritance of extended attributes
across fork() and exec().
The first simple scheme will allow privileged userspace to set
trusted extended attributes on pidfs inodes.
- Allow autonomous pidfs file handles
Various filesystems such as pidfs and drm support opening file
handles without having to require a file descriptor to identify the
filesystem. The filesystem are global single instances and can be
trivially identified solely on the information encoded in the file
handle.
This makes it possible to not have to keep or acquire a sentinal file
descriptor just to pass it to open_by_handle_at() to identify the
filesystem. That's especially useful when such sentinel file
descriptor cannot or should not be acquired.
For pidfs this means a file handle can function as full replacement
for storing a pid in a file. Instead a file handle can be stored and
reopened purely based on the file handle.
Such autonomous file handles can be opened with or without specifying
a a file descriptor. If no proper file descriptor is used the
FD_PIDFS_ROOT sentinel must be passed. This allows us to define
further special negative fd sentinels in the future.
Userspace can trivially test for support by trying to open the file
handle with an invalid file descriptor.
- Allow pidfds for reaped tasks with SCM_PIDFD messages
This is a logical continuation of the earlier work to create pidfds
for reaped tasks through the SO_PEERPIDFD socket option merged in
923ea4d448 ("Merge patch series "net, pidfs: enable handing out
pidfds for reaped sk->sk_peer_pid"").
- Two minor fixes:
* Fold fs_struct->{lock,seq} into a seqlock
* Don't bother with path_{get,put}() in unix_open_file()
* tag 'vfs-6.17-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (37 commits)
don't bother with path_get()/path_put() in unix_open_file()
fold fs_struct->{lock,seq} into a seqlock
selftests: net: extend SCM_PIDFD test to cover stale pidfds
af_unix: enable handing out pidfds for reaped tasks in SCM_PIDFD
af_unix: stash pidfs dentry when needed
af_unix/scm: fix whitespace errors
af_unix: introduce and use scm_replace_pid() helper
af_unix: introduce unix_skb_to_scm helper
af_unix: rework unix_maybe_add_creds() to allow sleep
selftests/pidfd: decode pidfd file handles withou having to specify an fd
fhandle, pidfs: support open_by_handle_at() purely based on file handle
uapi/fcntl: add FD_PIDFS_ROOT
uapi/fcntl: add FD_INVALID
fcntl/pidfd: redefine PIDFD_SELF_THREAD_GROUP
uapi/fcntl: mark range as reserved
fhandle: reflow get_path_anchor()
pidfs: add pidfs_root_path() helper
fhandle: rename to get_path_anchor()
fhandle: hoist copy_from_user() above get_path_from_fd()
fhandle: raise FILEID_IS_DIR in handle_type
...
-----BEGIN PGP SIGNATURE-----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=mKnX
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following series contains Netfilter/IPVS updates for net-next:
1) Display netns inode in conntrack table full log, from lvxiafei.
2) Autoload nf_log_syslog in case no logging backend is available,
from Lance Yang.
3) Three patches to remove unused functions in x_tables, nf_tables and
conntrack. From Yue Haibing.
4) Exclude LEGACY TABLES on PREEMPT_RT: Add NETFILTER_XTABLES_LEGACY
to exclude xtables legacy infrastructure.
5) Restore selftests by toggling NETFILTER_XTABLES_LEGACY where needed.
From Florian Westphal.
6) Use CONFIG_INET_SCTP_DIAG in tools/testing/selftests/net/netfilter/config,
from Sebastian Andrzej Siewior.
7) Use timer_delete in comment in IPVS codebase, from WangYuli.
8) Dump flowtable information in nfnetlink_hook, this includes an initial
patch to consolidate common code in helper function, from Phil Sutter.
9) Remove unused arguments in nft_pipapo set backend, from Florian Westphal.
10) Return nft_set_ext instead of boolean in set lookup function,
from Florian Westphal.
11) Remove indirection in dynamic set infrastructure, also from Florian.
12) Consolidate pipapo_get/lookup, from Florian.
13) Use kvmalloc in nft_pipapop, from Florian Westphal.
14) syzbot reports slab-out-of-bounds in xt_nfacct log message,
fix from Florian Westphal.
15) Ignored tainted kernels in selftest nft_interface_stress.sh,
from Phil Sutter.
16) Fix IPVS selftest by disabling rp_filter with ipip tunnel device,
from Yi Chen.
* tag 'nf-next-25-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
selftests: netfilter: ipvs.sh: Explicity disable rp_filter on interface tunl0
selftests: netfilter: Ignore tainted kernels in interface stress test
netfilter: xt_nfacct: don't assume acct name is null-terminated
netfilter: nft_set_pipapo: prefer kvmalloc for scratch maps
netfilter: nft_set_pipapo: merge pipapo_get/lookup
netfilter: nft_set: remove indirection from update API call
netfilter: nft_set: remove one argument from lookup and update functions
netfilter: nft_set_pipapo: remove unused arguments
netfilter: nfnetlink_hook: Dump flowtable info
netfilter: nfnetlink: New NFNLA_HOOK_INFO_DESC helper
ipvs: Rename del_timer in comment in ip_vs_conn_expire_now()
selftests: netfilter: Enable CONFIG_INET_SCTP_DIAG
selftests: net: Enable legacy netfilter legacy options.
netfilter: Exclude LEGACY TABLES on PREEMPT_RT.
netfilter: conntrack: Remove unused net in nf_conntrack_double_lock()
netfilter: nf_tables: Remove unused nft_reduce_is_readonly()
netfilter: x_tables: Remove unused functions xt_{in|out}name()
netfilter: load nf_log_syslog on enabling nf_conntrack_log_invalid
netfilter: conntrack: table full detailed log
====================
Link: https://patch.msgid.link/20250725170340.21327-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As part of the removal of the variably-sized sockaddr for kernel
internals, replace struct sockaddr with sockaddr_inet in the sctp_addr
union.
No binary changes; the union size remains unchanged due to sockaddr_inet
matching the size of sockaddr_in6.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250722171836.1078436-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This stems from a time when sets and nft_dynset resided in different kernel
modules. We can replace this with a direct call.
We could even remove both ->update and ->delete, given its only
supported by rhashtable, but on the off-chance we'll see runtime
add/delete for other types or a new set type keep that as-is for now.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Return the extension pointer instead of passing it as a function
argument to be filled in by the callee.
As-is, whenever false is returned, the extension pointer is not used.
For all set types, when true is returned, the extension pointer was set
to the matching element.
Only exception: nft_set_bitmap doesn't support extensions.
Return a pointer to a static const empty element extension container.
return false -> return NULL
return true -> return the elements' extension pointer.
This saves one function argument.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since commit 9e539c5b6d ("netfilter: nf_tables: disable expression
reduction infra") this is unused.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When no logger is registered, nf_conntrack_log_invalid fails to log invalid
packets, leaving users unaware of actual invalid traffic. Improve this by
loading nf_log_syslog, similar to how 'iptables -I FORWARD 1 -m conntrack
--ctstate INVALID -j LOG' triggers it.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Zi Li <zi.li@linux.dev>
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Move multiple copies of same code snippet doing `gro_flush` and
`gro_normal_list` into separate helper function.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-2-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core:
- hci_sync: fix double free in 'hci_discovery_filter_clear()'
- hci_event: Mask data status from LE ext adv reports
- hci_devcd_dump: fix out-of-bounds via dev_coredumpv
- ISO: add socket option to report packet seqnum via CMSG
- hci_event: Add support for handling LE BIG Sync Lost event
- ISO: Support SCM_TIMESTAMPING for ISO TS
- hci_core: Add PA_LINK to distinguish BIG sync and PA sync connections
- hci_sock: Reset cookie to zero in hci_sock_free_cookie()
drivers:
- btusb: Add new VID/PID 0489/e14e for MT7925
- btusb: Add a new VID/PID 2c7c/7009 for MT7925
- btusb: Add RTL8852BE device 0x13d3:0x3618
- btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601)
- btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano
- btusb: QCA: Support downloading custom-made firmwares
- btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
- nxp: add support for supply and reset
- btnxpuart: Add support for 4M baudrate
- btnxpuart: Correct the Independent Reset handling after FW dump
- btnxpuart: Add uevents for FW dump and FW download complete
- btintel: Define a macro for Intel Reset vendor command
- btintel_pcie: Support Function level reset
- btintel_pcie: Add support for device 0x4d76
- btintel_pcie: Make driver wait for alive interrupt
- btintel_pcie: Fix Alive Context State Handling
- hci_qca: Enable ISO data packet RX
-----BEGIN PGP SIGNATURE-----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=L038
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_sync: fix double free in 'hci_discovery_filter_clear()'
- hci_event: Mask data status from LE ext adv reports
- hci_devcd_dump: fix out-of-bounds via dev_coredumpv
- ISO: add socket option to report packet seqnum via CMSG
- hci_event: Add support for handling LE BIG Sync Lost event
- ISO: Support SCM_TIMESTAMPING for ISO TS
- hci_core: Add PA_LINK to distinguish BIG sync and PA sync connections
- hci_sock: Reset cookie to zero in hci_sock_free_cookie()
drivers:
- btusb: Add new VID/PID 0489/e14e for MT7925
- btusb: Add a new VID/PID 2c7c/7009 for MT7925
- btusb: Add RTL8852BE device 0x13d3:0x3618
- btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601)
- btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano
- btusb: QCA: Support downloading custom-made firmwares
- btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
- nxp: add support for supply and reset
- btnxpuart: Add support for 4M baudrate
- btnxpuart: Correct the Independent Reset handling after FW dump
- btnxpuart: Add uevents for FW dump and FW download complete
- btintel: Define a macro for Intel Reset vendor command
- btintel_pcie: Support Function level reset
- btintel_pcie: Add support for device 0x4d76
- btintel_pcie: Make driver wait for alive interrupt
- btintel_pcie: Fix Alive Context State Handling
- hci_qca: Enable ISO data packet RX
* tag 'for-net-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (42 commits)
Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections
Bluetooth: hci_event: Mask data status from LE ext adv reports
Bluetooth: btintel_pcie: Fix Alive Context State Handling
Bluetooth: btintel_pcie: Make driver wait for alive interrupt
Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv
Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()'
Bluetooth: btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
Bluetooth: btusb: Sort WCN6855 device IDs by VID and PID
Bluetooth: btusb: QCA: Support downloading custom-made firmwares
Bluetooth: btnxpuart: Add uevents for FW dump and FW download complete
Bluetooth: btnxpuart: Correct the Independent Reset handling after FW dump
Bluetooth: ISO: Support SCM_TIMESTAMPING for ISO TS
Bluetooth: ISO: add socket option to report packet seqnum via CMSG
Bluetooth: btintel: Define a macro for Intel Reset vendor command
Bluetooth: Fix typos in comments
Bluetooth: RFCOMM: Fix typos in comments
Bluetooth: aosp: Fix typo in comment
Bluetooth: hci_bcm4377: Fix typo in comment
Bluetooth: btrtl: Fix typo in comment
Bluetooth: btmtk: Fix typo in log string
...
====================
Link: https://patch.msgid.link/20250723190233.166823-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- rtw89:
- STA+P2P concurrency
- support for USB devices RTL8851BU/RTL8852BU
- ath9k: OF support
- ath12k:
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- iwlwifi: some FIPS interoperability
- brcm80211: support SDIO 43751 device
- rt2x00: better DT/OF support
- cfg80211/mac80211:
- improved S1G support
- beacon monitor for MLO
-----BEGIN PGP SIGNATURE-----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=Dkfh
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another wireless update:
- rtw89:
- STA+P2P concurrency
- support for USB devices RTL8851BU/RTL8852BU
- ath9k: OF support
- ath12k:
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- iwlwifi: some FIPS interoperability
- brcm80211: support SDIO 43751 device
- rt2x00: better DT/OF support
- cfg80211/mac80211:
- improved S1G support
- beacon monitor for MLO
* tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (199 commits)
ssb: use new GPIO line value setter callbacks for the second GPIO chip
wifi: Fix typos
wifi: brcmsmac: Use str_true_false() helper
wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failure
wifi: brcm80211: Remove yet more unused functions
wifi: brcm80211: Remove more unused functions
wifi: brcm80211: Remove unused functions
wifi: iwlwifi: Revert "wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions"
wifi: iwlwifi: check validity of the FW API range
wifi: iwlwifi: don't export symbols that we shouldn't
wifi: iwlwifi: mld: use spec link id and not FW link id
wifi: iwlwifi: mld: decode EOF bit for AMPDUs
wifi: iwlwifi: Remove support for rx OMI bandwidth reduction
wifi: iwlwifi: stop supporting iwl_omi_send_status_notif ver 1
wifi: iwlwifi: remove SC2F firmware support
wifi: iwlwifi: mvm: Remove NAN support
wifi: iwlwifi: mld: avoid outdated reorder buffer head_sn
wifi: iwlwifi: mvm: avoid outdated reorder buffer head_sn
wifi: iwlwifi: disable certain features for fips_enabled
wifi: iwlwifi: mld: support channel survey collection for ACS scans
...
====================
Link: https://patch.msgid.link/20250724100349.21564-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=MBQn
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-07-23
1) Premption fixes for xfrm_state_find.
From Sabrina Dubroca.
2) Initialize offload path also for SW IPsec GRO. This fixes a
performance regression on SW IPsec offload.
From Leon Romanovsky.
3) Fix IPsec UDP GRO for IKE packets.
From Tobias Brunner,
4) Fix transport header setting for IPcomp after decompressing.
From Fernando Fernandez Mancera.
5) Fix use-after-free when xfrmi_changelink tries to change
collect_md for a xfrm interface.
From Eyal Birger .
6) Delete the special IPcomp x->tunnel state along with the state x
to avoid refcount problems.
From Sabrina Dubroca.
Please pull or let me know if there are problems.
* tag 'ipsec-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
Revert "xfrm: destroy xfrm_state synchronously on net exit path"
xfrm: delete x->tunnel as we delete x
xfrm: interface: fix use-after-free after changing collect_md xfrm interface
xfrm: ipcomp: adjust transport header after decompressing
xfrm: Set transport header to fix UDP GRO handling
xfrm: always initialize offload path
xfrm: state: use a consistent pcpu_id in xfrm_state_find
xfrm: state: initialize state_ptrs earlier in xfrm_state_find
====================
Link: https://patch.msgid.link/20250723075417.3432644-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
DualPI2 provides L4S-type low latency & loss to traffic that uses a
scalable congestion controller (e.g. TCP-Prague, DCTCP) without
degrading the performance of 'classic' traffic (e.g. Reno,
Cubic etc.). It is to be the reference implementation of IETF RFC9332
DualQ Coupled AQM (https://datatracker.ietf.org/doc/html/rfc9332).
Note that creating two independent queues cannot meet the goal of
DualPI2 mentioned in RFC9332: "...to preserve fairness between
ECN-capable and non-ECN-capable traffic." Further, it could even
lead to starvation of Classic traffic, which is also inconsistent
with the requirements in RFC9332: "...although priority MUST be
bounded in order not to starve Classic traffic." DualPI2 is
designed to maintain approximate per-flow fairness on L-queue and
C-queue by forming a single qdisc using the coupling factor and
scheduler between two queues.
The qdisc provides two queues called low latency and classic. It
classifies packets based on the ECN field in the IP headers. By
default it directs non-ECN and ECT(0) into the classic queue and
ECT(1) and CE into the low latency queue, as per the IETF spec.
Each queue runs its own AQM:
* The classic AQM is called PI2, which is similar to the PIE AQM but
more responsive and simpler. Classic traffic requires a decent
target queue (default 15ms for Internet deployment) to fully
utilize the link and to avoid high drop rates.
* The low latency AQM is, by default, a very shallow ECN marking
threshold (1ms) similar to that used for DCTCP.
The DualQ isolates the low queuing delay of the Low Latency queue
from the larger delay of the 'Classic' queue. However, from a
bandwidth perspective, flows in either queue will share out the link
capacity as if there was just a single queue. This bandwidth pooling
effect is achieved by coupling together the drop and ECN-marking
probabilities of the two AQMs.
The PI2 AQM has two main parameters in addition to its target delay.
The integral gain factor alpha is used to slowly correct any persistent
standing queue error from the target delay, while the proportional gain
factor beta is used to quickly compensate for queue changes (growth or
shrinkage). Either alpha and beta are given as a parameter, or they can
be calculated by tc from alternative typical and maximum RTT parameters.
Internally, the output of a linear Proportional Integral (PI)
controller is used for both queues. This output is squared to
calculate the drop or ECN-marking probability of the classic queue.
This counterbalances the square-root rate equation of Reno/Cubic,
which is the trick that balances flow rates across the queues. For
the ECN-marking probability of the low latency queue, the output of
the base AQM is multiplied by a coupling factor. This determines the
balance between the flow rates in each queue. The default setting
makes the flow rates roughly equal, which should be generally
applicable.
If DUALPI2 AQM has detected overload (due to excessive non-responsive
traffic in either queue), it will switch to signaling congestion
solely using drop, irrespective of the ECN field. Alternatively, it
can be configured to limit the drop probability and let the queue
grow and eventually overflow (like tail-drop).
GSO splitting in DUALPI2 is configurable from userspace while the
default behavior is to split gso. When running DUALPI2 at unshaped
10gigE with 4 download streams test, splitting gso apart results in
halving the latency with no loss in throughput:
Summary of tcp_4down run 'no_split_gso':
avg median # data pts
Ping (ms) ICMP : 0.53 0.30 ms 350
TCP download avg : 2326.86 N/A Mbits/s 350
TCP download sum : 9307.42 N/A Mbits/s 350
TCP download::1 : 2672.99 2568.73 Mbits/s 350
TCP download::2 : 2586.96 2570.51 Mbits/s 350
TCP download::3 : 1786.26 1798.82 Mbits/s 350
TCP download::4 : 2261.21 2309.49 Mbits/s 350
Summart of tcp_4down run 'split_gso':
avg median # data pts
Ping (ms) ICMP : 0.22 0.23 ms 350
TCP download avg : 2335.02 N/A Mbits/s 350
TCP download sum : 9340.09 N/A Mbits/s 350
TCP download::1 : 2335.30 2334.22 Mbits/s 350
TCP download::2 : 2334.72 2334.20 Mbits/s 350
TCP download::3 : 2335.28 2334.58 Mbits/s 350
TCP download::4 : 2334.79 2334.39 Mbits/s 350
A similar result is observed when running DUALPI2 at unshaped 1gigE
with 1 download stream test:
Summary of tcp_1down run 'no_split_gso':
avg median # data pts
Ping (ms) ICMP : 1.13 1.25 ms 350
TCP download : 941.41 941.46 Mbits/s 350
Summart of tcp_1down run 'split_gso':
avg median # data pts
Ping (ms) ICMP : 0.51 0.55 ms 350
TCP download : 941.41 941.45 Mbits/s 350
Additional details can be found in the draft:
https://datatracker.ietf.org/doc/html/rfc9332
Signed-off-by: Koen De Schepper <koen.de_schepper@nokia-bell-labs.com>
Co-developed-by: Olga Albisser <olga@albisser.org>
Signed-off-by: Olga Albisser <olga@albisser.org>
Co-developed-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Co-developed-by: Henrik Steen <henrist@henrist.net>
Signed-off-by: Henrik Steen <henrist@henrist.net>
Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Bob Briscoe <research@bobbriscoe.net>
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Acked-by: Dave Taht <dave.taht@gmail.com>
Link: https://patch.msgid.link/20250722095915.24485-4-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make xdp access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-13-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make mlx4 access ->pp_ref_count through netmem_desc instead of page.
While at it, add a helper, pp_page_to_nmdesc() and __pp_page_to_nmdesc(),
that can be used to get netmem_desc from page only if it's a pp page.
For now that netmem_desc overlays on page, it can be achieved by just
casting, and use macro and _Generic to cover const casting as well.
Plus, change page_pool_page_is_pp() to check for 'const struct page *'
instead of 'struct page *' since it doesn't modify data and additionally
covers const type.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-4-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of the page pool fields in struct page, the page
pool code should use netmem descriptor and APIs instead.
However, __netmem_get_pp() still accesses ->pp via struct page. So
change it to use struct netmem_desc instead, since ->pp no longer will
be available in struct page.
While at it, add a helper, __netmem_to_nmdesc(), that can be used to
unsafely get pointer to netmem_desc backing the netmem_ref, only when
the netmem_ref is always backed by system memory.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-3-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To simplify struct page, the page pool members of struct page should be
moved to other, allowing these members to be removed from struct page.
Introduce a network memory descriptor to store the members, struct
netmem_desc, and make it union'ed with the existing fields in struct
net_iov, allowing to organize the fields of struct net_iov.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20250721021835.63939-2-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, BIS_LINK is used for both BIG sync and PA sync connections,
which makes it impossible to distinguish them when searching for a PA
sync connection.
Adding PA_LINK will make the distinction clearer and simplify future
extensions for PA-related features.
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Event_Type field in an LE Extended Advertising Report uses bits 5
and 6 for data status (e.g. truncation or fragmentation), not the PDU
type itself.
The ext_evt_type_to_legacy() function fails to mask these status bits
before evaluation. This causes valid advertisements with status bits set
(e.g. a truncated non-connectable advertisement, which ends up showing
as PDU type 0x40) to be misclassified as unknown and subsequently
dropped. This is okay for most checks which use bitwise AND on the
relevant event type bits, but it doesn't work for non-connectable types,
which are checked with '== LE_EXT_ADV_NON_CONN_IND' (that is, zero).
In terms of behaviour, first the device sends a truncated report:
> HCI Event: LE Meta Event (0x3e) plen 26
LE Extended Advertising Report (0x0d)
Entry 0
Event type: 0x0040
Data status: Incomplete, data truncated, no more to come
Address type: Random (0x01)
Address: 1D:12:46:FA:F8:6E (Non-Resolvable)
SID: 0x03
RSSI: -98 dBm (0x9e)
Data length: 0x00
Then, a few seconds later, it sends the subsequent complete report:
> HCI Event: LE Meta Event (0x3e) plen 122
LE Extended Advertising Report (0x0d)
Entry 0
Event type: 0x0000
Data status: Complete
Address type: Random (0x01)
Address: 1D:12:46:FA:F8:6E (Non-Resolvable)
SID: 0x03
RSSI: -97 dBm (0x9f)
Data length: 0x60
Service Data: Google (0xfef3)
Data[92]: ...
These devices often send multiple truncated reports per second.
This patch introduces a PDU type mask to ensure only the relevant bits
are evaluated, allowing for the correct translation of all valid
extended advertising packets.
Fixes: b2cc9761f1 ("Bluetooth: Handle extended ADV PDU types")
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
User applications need a way to track which ISO interval a given SDU
belongs to, to properly detect packet loss. All controllers do not set
timestamps, and it's not guaranteed user application receives all packet
reports (small socket buffer, or controller doesn't send all reports
like Intel AX210 is doing).
Add socket option BT_PKT_SEQNUM that enables reporting of received
packet ISO sequence number in BT_SCM_PKT_SEQNUM CMSG.
Use BT_PKT_SEQNUM == 22 for the socket option, as 21 was used earlier
for a removed experimental feature that never got into mainline.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Correct the misspelling of “estabilished” in the code.
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the BIS source stops, the controller sends an LE BIG Sync Lost
event (subevent 0x1E). Currently, this event is not handled, causing
the BIS stream to remain active in BlueZ and preventing recovery.
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since commit 4aa42119d9 ("Bluetooth: Remove pending ACL connection
attempts") this function is unused.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ieee80211_add_gtk_rekey receives a keyconf as an argument, and the
cipher and keylen are taken from there to the new allocated key.
But in rekey, both the cipher and the keylen should be the same as of
the old key, so let ieee80211_add_gtk_rekey find those, so drivers won't
have to fill it in.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250721214922.3c5c023bfae9.Ie6594ae2b4b6d5b3d536e642b349046ebfce7a5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The upper layer may require the link ID to properly handle
unexpected frames. For instance, if hostapd, operating as an
AP MLD, receives a data frame from a non-associated STA,
it must send deauthentication to the link on which the STA is
operating.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Reviewed-by: Money Wang <money.wang@mediatek.com>
Link: https://patch.msgid.link/20250721065159.1740992-1-michael-cy.lee@mediatek.com
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new SKB drop reason (SKB_DROP_REASON_PFMEMALLOC) to track packets
dropped due to memory pressure. In production environments, we've observed
memory exhaustion reported by memory layer stack traces, but these drops
were not properly tracked in the SKB drop reason infrastructure.
While most network code paths now properly report pfmemalloc drops, some
protocol-specific socket implementations still use sk_filter() without
drop reason tracking:
- Bluetooth L2CAP sockets
- CAIF sockets
- IUCV sockets
- Netlink sockets
- SCTP sockets
- Unix domain sockets
These remaining cases represent less common paths and could be converted
in a follow-up patch if needed. The current implementation provides
significantly improved observability into memory pressure events in the
network stack, especially for key protocols like TCP and UDP, helping to
diagnose problems in production environments.
Reported-by: Matt Fleming <mfleming@cloudflare.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/175268316579.2407873.11634752355644843509.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the ability to parse the short beacon data and long
beacon period. The long beacon period represents the number of beacon
intervals between each long beacon transmission. Additionally,
as a BSS cannot change its configuration such that short beaconing
is dynamically disabled/enabled without tearing down the interface
- we ensure we have an existing short beacon before performing
the update.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250717074205.312577-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G short beacons are an optional frame type used in an S1G BSS
that contain a limited set of elements. While they are optional,
they are a fundamental part of S1G that enables significant
power saving.
Expose 2 additional netlink attributes,
NL80211_ATTR_S1G_LONG_BEACON_PERIOD which denotes the number of beacon
intervals between each long beacon and NL80211_ATTR_S1G_SHORT_BEACON
which is a nested attribute containing the short beacon tail and
head. We split them as the long beacon period cannot be updated,
and is only used when initialisng the interface, whereas the short
beacon data can be used to both initialise and update the templates.
This follows how things such as the beacon interval and DTIM period
currently operate.
During the initialisation path, we ensure we have the long beacon
period if the short beacon data is being passed down, whereas
the update path will simply update the template if its sent down.
The short beacon data is validated using the same routines for regular
beacons as they support correctly parsing the short beacon format
while ensuring the frame is well-formed.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250717074205.312577-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
neigh_add() updates pneigh_entry() found or created by pneigh_create().
This update is serialised by RTNL, but we will remove it.
Let's move the update part to pneigh_create() and make it return errno
instead of a pointer of pneigh_entry.
Now, the pneigh code is RTNL free.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-16-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tbl->phash_buckets[] is only modified in the slow path by pneigh_create()
and pneigh_delete() under the table lock.
Both of them are called under RTNL, so no extra lock is needed, but we
will remove RTNL from the paths.
pneigh_create() looks up a pneigh_entry, and this part can be lockless,
but it would complicate the logic like
1. lookup
2. allocate pengih_entry for GFP_KERNEL
3. lookup again but under lock
4. if found, return it after freeing the allocated memory
5. else, return the new one
Instead, let's add a per-table mutex and run lookup and allocation
under it.
Note that updating pneigh_entry part in neigh_add() is still protected
by RTNL and will be moved to pneigh_create() in the next patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-15-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__pneigh_lookup() is the lockless version of pneigh_lookup(),
but its only caller pndisc_is_router() holds the table lock and
reads pneigh_netry.flags.
This is because accessing pneigh_entry after pneigh_lookup() was
illegal unless the caller holds RTNL or the table lock.
Now, pneigh_entry is guaranteed to be alive during the RCU critical
section.
Let's call pneigh_lookup() and use READ_ONCE() for n->flags in
pndisc_is_router() and remove __pneigh_lookup().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-13-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will convert RTM_GETNEIGH to RCU.
neigh_get() looks up pneigh_entry by pneigh_lookup() and passes
it to pneigh_fill_info().
Then, we must ensure that the entry is alive till pneigh_fill_info()
completes, but read_lock_bh(&tbl->lock) in pneigh_lookup() does not
guarantee that.
Also, we will convert all readers of tbl->phash_buckets[] to RCU.
Let's use call_rcu() to free pneigh_entry and update phash_buckets[]
and ->next by rcu_assign_pointer().
pneigh_ifdown_and_unlock() uses list_head to avoid overwriting
->next and moving RCU iterators to another list.
pndisc_destructor() (only IPv6 ndisc uses this) uses a mutex, so it
is not delayed to call_rcu(), where we cannot sleep. This is fine
because the mcast code works with RCU and ipv6_dev_mc_dec() frees
mcast objects after RCU grace period.
While at it, we change the return type of pneigh_ifdown_and_unlock()
to void.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The next patch will free pneigh_entry with call_rcu().
Then, we need to annotate neigh_table.phash_buckets[] and
pneigh_entry.next with __rcu.
To make the next patch cleaner, let's annotate the fields in advance.
Currently, all accesses to the fields are under the neigh table lock,
so rcu_dereference_protected() is used with 1 for now, but most of them
(except in pneigh_delete() and pneigh_ifdown_and_unlock()) will be
replaced with rcu_dereference() and rcu_dereference_check().
Note that pneigh_ifdown_and_unlock() changes pneigh_entry.next to a
local list, which is illegal because the RCU iterator could be moved
to another list. This part will be fixed in the next patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pneigh_lookup() has ASSERT_RTNL() in the middle of the function, which
is confusing.
When called with the last argument, creat, 0, pneigh_lookup() literally
looks up a proxy neighbour entry. This is the case of the reader path
as the fast path and RTM_GETNEIGH.
pneigh_lookup(), however, creates a pneigh_entry when called with creat 1
from RTM_NEWNEIGH and SIOCSARP, which require RTNL.
Let's split pneigh_lookup() into two functions.
We will convert all the reader paths to RCU, and read_lock_bh(&tbl->lock)
in the new pneigh_lookup() will be dropped.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- hci_sync: fix connectable extended advertising when using static random address
- hci_core: fix typos in macros
- hci_core: add missing braces when using macro parameters
- hci_core: replace 'quirks' integer by 'quirk_flags' bitmap
- SMP: If an unallowed command is received consider it a failure
- SMP: Fix using HCI_ERROR_REMOTE_USER_TERM on timeout
- L2CAP: Fix null-ptr-deref in l2cap_sock_resume_cb()
- L2CAP: Fix attempting to adjust outgoing MTU
- btintel: Check if controller is ISO capable on btintel_classify_pkt_type
- btusb: QCA: Fix downloading wrong NVM for WCN6855 GF variant without board ID
-----BEGIN PGP SIGNATURE-----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=JuS2
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: fix connectable extended advertising when using static random address
- hci_core: fix typos in macros
- hci_core: add missing braces when using macro parameters
- hci_core: replace 'quirks' integer by 'quirk_flags' bitmap
- SMP: If an unallowed command is received consider it a failure
- SMP: Fix using HCI_ERROR_REMOTE_USER_TERM on timeout
- L2CAP: Fix null-ptr-deref in l2cap_sock_resume_cb()
- L2CAP: Fix attempting to adjust outgoing MTU
- btintel: Check if controller is ISO capable on btintel_classify_pkt_type
- btusb: QCA: Fix downloading wrong NVM for WCN6855 GF variant without board ID
* tag 'for-net-2025-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix attempting to adjust outgoing MTU
Bluetooth: btusb: QCA: Fix downloading wrong NVM for WCN6855 GF variant without board ID
Bluetooth: hci_dev: replace 'quirks' integer by 'quirk_flags' bitmap
Bluetooth: hci_core: add missing braces when using macro parameters
Bluetooth: hci_core: fix typos in macros
Bluetooth: SMP: Fix using HCI_ERROR_REMOTE_USER_TERM on timeout
Bluetooth: SMP: If an unallowed command is received consider it a failure
Bluetooth: btintel: Check if controller is ISO capable on btintel_classify_pkt_type
Bluetooth: hci_sync: fix connectable extended advertising when using static random address
Bluetooth: Fix null-ptr-deref in l2cap_sock_resume_cb()
====================
Link: https://patch.msgid.link/20250717142849.537425-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- cfg80211: fix double-free introduced earlier
- mac80211: fix RCU iteration in CSA
- iwlwifi: many cleanups (unused FW APIs, PCIe code, WoWLAN)
- mac80211: some work around how FIPS affects wifi, which was
wrong (RC4 is used by TKIP, not only WEP)
- cfg/mac80211: improvements for unsolicated probe response
handling
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmh4xE8ACgkQ10qiO8sP
aAANTA/9HWfjfXTvZ3lEZqmOeJdHxd6xw3uHA732NF+KxoKi8vnO8V63WNVxBzCF
6srSaSi0IkdtnyR/uPqG5AkWej/ouAeDy+FtzoDpP8O6G4e9yjKZBRnvP+O/gkod
ERM4ouLWsumAIZqSqrSAJHgNTOP0/n5MNiLoKHlcjZmXphL2/lM8Qay7kVmWG+vT
tqv/LrwqRiTe/a+O9PKaW2sq6z23CBhEqWf6hhFCaEPVQXQJLBc6FTI4008zP/Rt
aSq672rMwA8ckuVOH0EAX544DMJc736to9XJEuu9EzuOaDZ9FwfqF9nOTMnFDev2
k9qn8Q5vsx+786A6pXw+sarnxhUxnQCYB00MhMe1e1yoB0lv57hZCD1Z0JTBGXPh
8ghmbelYBvkLollie6zUUcdf3G98ADUYvHsR0elBgGADWPHvnbn3ORVcv852X6jS
El1CR3lyvwwHn9USKaR91ESQWFRtLtPG+OmmLRLIG7wdkp0sDjHOpvV7A/7QpFLw
A18QrN+ORNL3Pja4A4dyIpDRQiTKHIjEEm3dAlVDzSWcPpcws5WlfreC1L71XblA
kRl+1I7SZ87rp8d6TXXxc8QmIMA+M4OL6M4FMAJgjn8VdyjlaC6lvl1i+tgdaDik
ISrY/78gnnt93BQmHU4P/syvh+NdpgNN+LgeaikKb1kmjG837Yk=
=g8VQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another set of changes, notably:
- cfg80211: fix double-free introduced earlier
- mac80211: fix RCU iteration in CSA
- iwlwifi: many cleanups (unused FW APIs, PCIe code, WoWLAN)
- mac80211: some work around how FIPS affects wifi, which was
wrong (RC4 is used by TKIP, not only WEP)
- cfg/mac80211: improvements for unsolicated probe response
handling
* tag 'wireless-next-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (64 commits)
wifi: cfg80211: fix double free for link_sinfo in nl80211_station_dump()
wifi: cfg80211: fix off channel operation allowed check for MLO
wifi: mac80211: use RCU-safe iteration in ieee80211_csa_finish
wifi: mac80211_hwsim: Update comments in header
wifi: mac80211: parse unsolicited broadcast probe response data
wifi: cfg80211: parse attribute to update unsolicited probe response template
wifi: mac80211: don't use TPE data from assoc response
wifi: mac80211: handle WLAN_HT_ACTION_NOTIFY_CHANWIDTH async
wifi: mac80211: simplify __ieee80211_rx_h_amsdu() loop
wifi: mac80211: don't mark keys for inactive links as uploaded
wifi: mac80211: only assign chanctx in reconfig
wifi: mac80211_hwsim: Declare support for AP scanning
wifi: mac80211: clean up cipher suite handling
wifi: mac80211: don't send keys to driver when fips_enabled
wifi: cfg80211: Fix interface type validation
wifi: mac80211: remove ieee80211_link_unreserve_chanctx() return value
wifi: mac80211: don't unreserve never reserved chanctx
mwl8k: Add missing check after DMA map
wifi: mac80211: make VHT opmode NSS ignore a debug message
wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions
...
====================
Link: https://patch.msgid.link/20250717094610.20106-47-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- ath12k performance regression from -rc1
- cfg80211 counted_by() removal for scan request
as it doesn't match usage and keeps complaining
- iwlwifi crash with certain older devices
- iwlwifi missing an error path unlock
- iwlwifi compatibility with certain BIOS updates
-----BEGIN PGP SIGNATURE-----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=yzt3
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
- ath12k performance regression from -rc1
- cfg80211 counted_by() removal for scan request
as it doesn't match usage and keeps complaining
- iwlwifi crash with certain older devices
- iwlwifi missing an error path unlock
- iwlwifi compatibility with certain BIOS updates
* tag 'wireless-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix botched indexing conversion
wifi: cfg80211: remove scan request n_channels counted_by
wifi: ath12k: Fix packets received in WBM error ring with REO LUT enabled
wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap
wifi: iwlwifi: pcie: fix locking on invalid TOP reset
====================
Link: https://patch.msgid.link/20250717091831.18787-5-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A crash in conntrack was reported while trying to unlink the conntrack
entry from the hash bucket list:
[exception RIP: __nf_ct_delete_from_lists+172]
[..]
#7 [ff539b5a2b043aa0] nf_ct_delete at ffffffffc124d421 [nf_conntrack]
#8 [ff539b5a2b043ad0] nf_ct_gc_expired at ffffffffc124d999 [nf_conntrack]
#9 [ff539b5a2b043ae0] __nf_conntrack_find_get at ffffffffc124efbc [nf_conntrack]
[..]
The nf_conn struct is marked as allocated from slab but appears to be in
a partially initialised state:
ct hlist pointer is garbage; looks like the ct hash value
(hence crash).
ct->status is equal to IPS_CONFIRMED|IPS_DYING, which is expected
ct->timeout is 30000 (=30s), which is unexpected.
Everything else looks like normal udp conntrack entry. If we ignore
ct->status and pretend its 0, the entry matches those that are newly
allocated but not yet inserted into the hash:
- ct hlist pointers are overloaded and store/cache the raw tuple hash
- ct->timeout matches the relative time expected for a new udp flow
rather than the absolute 'jiffies' value.
If it were not for the presence of IPS_CONFIRMED,
__nf_conntrack_find_get() would have skipped the entry.
Theory is that we did hit following race:
cpu x cpu y cpu z
found entry E found entry E
E is expired <preemption>
nf_ct_delete()
return E to rcu slab
init_conntrack
E is re-inited,
ct->status set to 0
reply tuplehash hnnode.pprev
stores hash value.
cpu y found E right before it was deleted on cpu x.
E is now re-inited on cpu z. cpu y was preempted before
checking for expiry and/or confirm bit.
->refcnt set to 1
E now owned by skb
->timeout set to 30000
If cpu y were to resume now, it would observe E as
expired but would skip E due to missing CONFIRMED bit.
nf_conntrack_confirm gets called
sets: ct->status |= CONFIRMED
This is wrong: E is not yet added
to hashtable.
cpu y resumes, it observes E as expired but CONFIRMED:
<resumes>
nf_ct_expired()
-> yes (ct->timeout is 30s)
confirmed bit set.
cpu y will try to delete E from the hashtable:
nf_ct_delete() -> set DYING bit
__nf_ct_delete_from_lists
Even this scenario doesn't guarantee a crash:
cpu z still holds the table bucket lock(s) so y blocks:
wait for spinlock held by z
CONFIRMED is set but there is no
guarantee ct will be added to hash:
"chaintoolong" or "clash resolution"
logic both skip the insert step.
reply hnnode.pprev still stores the
hash value.
unlocks spinlock
return NF_DROP
<unblocks, then
crashes on hlist_nulls_del_rcu pprev>
In case CPU z does insert the entry into the hashtable, cpu y will unlink
E again right away but no crash occurs.
Without 'cpu y' race, 'garbage' hlist is of no consequence:
ct refcnt remains at 1, eventually skb will be free'd and E gets
destroyed via: nf_conntrack_put -> nf_conntrack_destroy -> nf_ct_destroy.
To resolve this, move the IPS_CONFIRMED assignment after the table
insertion but before the unlock.
Pablo points out that the confirm-bit-store could be reordered to happen
before hlist add resp. the timeout fixup, so switch to set_bit and
before_atomic memory barrier to prevent this.
It doesn't matter if other CPUs can observe a newly inserted entry right
before the CONFIRMED bit was set:
Such event cannot be distinguished from above "E is the old incarnation"
case: the entry will be skipped.
Also change nf_ct_should_gc() to first check the confirmed bit.
The gc sequence is:
1. Check if entry has expired, if not skip to next entry
2. Obtain a reference to the expired entry.
3. Call nf_ct_should_gc() to double-check step 1.
nf_ct_should_gc() is thus called only for entries that already failed an
expiry check. After this patch, once the confirmed bit check passes
ct->timeout has been altered to reflect the absolute 'best before' date
instead of a relative time. Step 3 will therefore not remove the entry.
Without this change to nf_ct_should_gc() we could still get this sequence:
1. Check if entry has expired.
2. Obtain a reference.
3. Call nf_ct_should_gc() to double-check step 1:
4 - entry is still observed as expired
5 - meanwhile, ct->timeout is corrected to absolute value on other CPU
and confirm bit gets set
6 - confirm bit is seen
7 - valid entry is removed again
First do check 6), then 4) so the gc expiry check always picks up either
confirmed bit unset (entry gets skipped) or expiry re-check failure for
re-inited conntrack objects.
This change cannot be backported to releases before 5.19. Without
commit 8a75a2c174 ("netfilter: conntrack: remove unconfirmed list")
|= IPS_CONFIRMED line cannot be moved without further changes.
Cc: Razvan Cojocaru <rzvncj@gmail.com>
Link: https://lore.kernel.org/netfilter-devel/20250627142758.25664-1-fw@strlen.de/
Link: https://lore.kernel.org/netfilter-devel/4239da15-83ff-4ca4-939d-faef283471bb@gmail.com/
Fixes: 1397af5bfd ("netfilter: conntrack: remove the percpu dying list")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The 'quirks' member already ran out of bits on some platforms some time
ago. Replace the integer member by a bitmap in order to have enough bits
in future. Replace raw bit operations by accessor macros.
Fixes: ff26b2dd65 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING")
Fixes: 127881334e ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE")
Suggested-by: Pauli Virtanen <pav@iki.fi>
Tested-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Macro parameters should always be put into braces when accessing it.
Fixes: 4fc9857ab8 ("Bluetooth: hci_sync: Add check simultaneous roles support")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The provided macro parameter is named 'dev' (rather than 'hdev', which
may be a variable on the stack where the macro is used).
Fixes: a9a830a676 ("Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE")
Fixes: 6126ffabba ("Bluetooth: Introduce HCI_CONN_FLAG_DEVICE_PRIVACY device flag")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Prior to calling bind() a program may call connect() on a socket to
restrict to a remote peer address.
Using connect() is the normal mechanism to specify a remote network
peer, so we use that here. In MCTP connect() is only used for bound
sockets - send() is not available for MCTP since a tag must be provided
for each message.
The smctp_type must match between connect() and bind() calls.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20250710-mctp-bind-v4-6-8ec2f6460c56@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ensure that a specific EID (remote or local) bind will match in
preference to a MCTP_ADDR_ANY bind.
This adds infrastructure for binding a socket to receive messages from a
specific remote peer address, a future commit will expose an API for
this.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20250710-mctp-bind-v4-5-8ec2f6460c56@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
At present, the updated unsolicited broadcast probe response template is
not processed during userspace commands such as channel switch or color
change. This leads to an issue where older incorrect unsolicited probe
response is still used during these events.
Add support to parse the netlink attribute and store it so that
mac80211/drivers can use it to set the BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
flag in order to send the updated unsolicited broadcast probe response
templates during these events.
Signed-off-by: Yuvarani V <quic_yuvarani@quicinc.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250710-update_unsol_bcast_probe_resp-v2-1-31aca39d3b30@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit e3eac9f32e ("wifi: cfg80211: Annotate struct
cfg80211_scan_request with __counted_by").
This really has been a completely failed experiment. There were
no actual bugs found, and yet at this point we already have four
"fixes" to it, with nothing to show for but code churn, and it
never even made the code any safer.
In all of the cases that ended up getting "fixed", the structure
is also internally inconsistent after the n_channels setting as
the channel list isn't actually filled yet. You cannot scan with
such a structure, that's just wrong. In mac80211, the struct is
also reused multiple times, so initializing it once is no good.
Some previous "fixes" (e.g. one in brcm80211) are also just setting
n_channels before accessing the array, under the assumption that the
code is correct and the array can be accessed, further showing that
the whole thing is just pointless when the allocation count and use
count are not separate.
If we really wanted to fix it, we'd need to separately track the
number of channels allocated and the number of channels currently
used, but given that no bugs were found despite the numerous syzbot
reports, that'd just be a waste of time.
Remove the __counted_by() annotation. We really should also remove
a number of the n_channels settings that are setting up a structure
that's inconsistent, but that can wait.
Reported-by: syzbot+e834e757bd9b3d3e1251@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e834e757bd9b3d3e1251
Fixes: e3eac9f32e ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Link: https://patch.msgid.link/20250714142130.9b0bbb7e1f07.I09112ccde72d445e11348fc2bef68942cb2ffc94@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These functions to not modify the skb, add a const qualifier.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new SNMP MIB : LINUX_MIB_BEYOND_WINDOW
Incremented when an incoming packet is received beyond the
receiver window.
nstat -az | grep TcpExtBeyondWindow
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, TCP accepts incoming packets which might go beyond the
offered RWIN.
Add to tcp_sequence() the validation of packet end sequence.
Add the corresponding check in the fast path.
We relax this new constraint if the receive queue is empty,
to not freeze flows from buggy peers.
Add a new drop reason : SKB_DROP_REASON_TCP_INVALID_END_SEQUENCE.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
x25_terminate_link() has been unused since the last use was removed
in 2020 by:
commit 7eed751b3b ("net/x25: handle additional netdev events")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://patch.msgid.link/20250712205759.278777-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 465b9ee0ee.
Such notifications fit better into core or nfnetlink_hook code,
following the NFNL_MSG_HOOK_GET message format.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Also storing tcf_action into struct tcf_skbedit_params
makes sure there is no discrepancy in tcf_skbedit_act().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_police_params
makes sure there is no discrepancy in tcf_police_act().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_pedit_params
makes sure there is no discrepancy in tcf_pedit_act().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_nat_params
makes sure there is no discrepancy in tcf_nat_act().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_mpls_params
makes sure there is no discrepancy in tcf_mpls_act().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_ctinfo_params
makes sure there is no discrepancy in tcf_ctinfo_act().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 21c167aa0b ("net/sched: act_ctinfo: use percpu stats")
missed that stats_dscp_set, stats_dscp_error and stats_cpmark_set
might be written (and read) locklessly.
Use atomic64_t for these three fields, I doubt act_ctinfo is used
heavily on big SMP hosts anyway.
Fixes: 24ec483cec ("net: sched: Introduce act_ctinfo action")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pedro Tammela <pctammela@mojatatu.com>
Link: https://patch.msgid.link/20250709090204.797558-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_ct_params
makes sure there is no discrepancy in tcf_ct_act().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_csum_params
makes sure there is no discrepancy in tcf_csum_act().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_connmark_parms
makes sure there is no discrepancy in tcf_connmark_act().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_tm_dump() reads fields that can be changed concurrently,
and tcf_lastuse_update() might race against itself.
Add READ_ONCE() and WRITE_ONCE() annotations.
Fetch jiffies once in tcf_tm_dump().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2).
No conflicts.
Adjacent changes:
drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
c701574c54 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan")
b3a431fe2e ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()")
drivers/net/wireless/mediatek/mt76/mt7996/mac.c
62da647a2b ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
dc66a129ad ("wifi: mt76: add a wrapper for wcid access with validation")
drivers/net/wireless/mediatek/mt76/mt7996/main.c
3dd6f67c66 ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()")
8989d8e90f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()")
net/mac80211/cfg.c
58fcb1b428 ("wifi: mac80211: reject VHT opmode for unsupported channel widths")
037dc18ac3 ("wifi: mac80211: add support for storing station S1G capabilities")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use attach_type in bpf_link to replace the location filed, and
remove location field in tcx_link.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20250710032038.888700-5-chen.dylane@linux.dev
-----BEGIN PGP SIGNATURE-----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=zECx
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next (v2)
The following series contains an initial small batch of Netfilter
updates for net-next:
1) Remove DCCP conntrack support, keep DCCP matches around in order to
avoid breakage when loading ruleset, add Kconfig to wrap the code
so it can be disabled by distributors.
2) Remove buggy code aiming at shrinking netlink deletion event, then
re-add it correctly in another patch. This is to prevent -stable to
pick up on a fix that breaks old userspace. From Phil Sutter.
3) Missing WARN_ON_ONCE() to check for lockdep_commit_lock_is_held()
to uncover bugs. From Fedor Pchelkin.
* tag 'nf-next-25-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: adjust lockdep assertions handling
netfilter: nf_tables: Reintroduce shortened deletion notifications
netfilter: nf_tables: Drop dead code from fill_*_info routines
netfilter: conntrack: remove DCCP protocol support
====================
Link: https://patch.msgid.link/20250710010706.2861281-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mt76: firmware recovery improvements, MLO work
- iwlwifi: use embedded PNVM in (to be released) FW images
to fix compatibility issues
- cfg80211/mac80211: extended regulatory info support (6 GHz)
- cfg80211: use "faux device" for regulatory
-----BEGIN PGP SIGNATURE-----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=qkYl
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-07-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Quite a bit more work, notably:
- mt76: firmware recovery improvements, MLO work
- iwlwifi: use embedded PNVM in (to be released) FW images
to fix compatibility issues
- cfg80211/mac80211: extended regulatory info support (6 GHz)
- cfg80211: use "faux device" for regulatory
* tag 'wireless-next-2025-07-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (48 commits)
wifi: mac80211: don't complete management TX on SAE commit
wifi: cfg80211/mac80211: implement dot11ExtendedRegInfoSupport
wifi: mac80211: send extended MLD capa/ops if AP has it
wifi: mac80211: copy first_part into HW scan
wifi: cfg80211: add a flag for the first part of a scan
wifi: mac80211: remove DISALLOW_PUNCTURING_5GHZ code
wifi: cfg80211: only verify part of Extended MLD Capabilities
wifi: nl80211: make nl80211_check_scan_flags() type safe
wifi: cfg80211: hide scan internals
wifi: mac80211: fix deactivated link CSA
wifi: mac80211: add mandatory bitrate support for 6 GHz
wifi: mac80211: remove spurious blank line
wifi: mac80211: verify state before connection
wifi: mac80211: avoid weird state in error path
wifi: iwlwifi: mvm: remove support for iwl_wowlan_info_notif_v4
wifi: iwlwifi: bump minimum API version in BZ
wifi: iwlwifi: mvm: remove unneeded argument
wifi: iwlwifi: mvm: remove MLO GTK rekey code
wifi: iwlwifi: pcie: rename iwl_pci_gen1_2_probe() argument
wifi: iwlwifi: match discrete/integrated to fix some names
...
====================
Link: https://patch.msgid.link/20250710123113.24878-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ND_PRINTK with val > 1 only works when the ND_DEBUG was set in compilation
phase. Replace it with dynamic debug. Convert ND_PRINTK with val <= 1 to
net_{err,warn}_ratelimited, and convert the rest to net_dbg_ratelimited.
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250708033342.1627636-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch provides a setsockopt method to let applications leverage to
adjust how many descs to be handled at most in one send syscall. It
mitigates the situation where the default value (32) that is too small
leads to higher frequency of triggering send syscall.
Considering the prosperity/complexity the applications have, there is no
absolutely ideal suggestion fitting all cases. So keep 32 as its default
value like before.
The patch does the following things:
- Add XDP_MAX_TX_SKB_BUDGET socket option.
- Set max_tx_budget to 32 by default in the initialization phase as a
per-socket granular control.
- Set the range of max_tx_budget as [32, xs->tx->nentries].
The idea behind this comes out of real workloads in production. We use a
user-level stack with xsk support to accelerate sending packets and
minimize triggering syscalls. When the packets are aggregated, it's not
hard to hit the upper bound (namely, 32). The moment user-space stack
fetches the -EAGAIN error number passed from sendto(), it will loop to try
again until all the expected descs from tx ring are sent out to the driver.
Enlarging the XDP_MAX_TX_SKB_BUDGET value contributes to less frequency of
sendto() and higher throughput/PPS.
Here is what I did in production, along with some numbers as follows:
For one application I saw lately, I suggested using 128 as max_tx_budget
because I saw two limitations without changing any default configuration:
1) XDP_MAX_TX_SKB_BUDGET, 2) socket sndbuf which is 212992 decided by
net.core.wmem_default. As to XDP_MAX_TX_SKB_BUDGET, the scenario behind
this was I counted how many descs are transmitted to the driver at one
time of sendto() based on [1] patch and then I calculated the
possibility of hitting the upper bound. Finally I chose 128 as a
suitable value because 1) it covers most of the cases, 2) a higher
number would not bring evident results. After twisting the parameters,
a stable improvement of around 4% for both PPS and throughput and less
resources consumption were found to be observed by strace -c -p xxx:
1) %time was decreased by 7.8%
2) error counter was decreased from 18367 to 572
[1]: https://lore.kernel.org/all/20250619093641.70700-1-kerneljasonxing@gmail.com/
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250704160138.48677-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c)
when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the return
value before using it, similar to the existing approach in sch_hfsc.c.
To avoid code duplication, the following changes are made:
1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a static
inline function.
2. Moved qdisc_peek_len from net/sched/sch_hfsc.c to
include/net/pkt_sched.h so that sch_qfq can reuse it.
3. Applied qdisc_peek_len in agg_dequeue to avoid crashing.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250705212143.3982664-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a new device generic parameter to specify clock ID that should
be used by the device for registering DPLL devices and pins.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250704182202.1641943-5-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only 8, 16 and 32-bit integers are supported for numeric devlink
parameters. The subsequent patch adds support for DPLL clock ID
that is defined as 64-bit number. Add support for u64 parameter
type.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250704182202.1641943-4-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When SAE commit is sent and received in response, there's no
ordering for the SAE confirm messages. As such, don't call
drivers to stop listening on the channel when the confirm
message is still expected.
This fixes an issue if the local confirm is transmitted later
than the AP's confirm, for iwlwifi (and possibly mt76) the
AP's confirm would then get lost since the device isn't on
the channel at the time the AP transmit the confirm.
For iwlwifi at least, this also improves the overall timing
of the authentication handshake (by about 15ms according to
the report), likely since the session protection won't be
aborted and rescheduled.
Note that even before this, mgd_complete_tx() wasn't always
called for each call to mgd_prepare_tx() (e.g. in the case
of WEP key shared authentication), and the current drivers
that have the complete callback don't seem to mind. Document
this as well though.
Reported-by: Jan Hendrik Farr <kernel@jfarr.cc>
Closes: https://lore.kernel.org/all/aB30Ea2kRG24LINR@archlinux/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213232.12691580e140.I3f1d3127acabcd58348a110ab11044213cf147d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When there are no non-6 GHz channels, then the 6 GHz scan is the first
part of a split scan. Add a boolean denoting whether the scan is the
first part of a scan as it might be useful to drivers for internal
bookkeeping. This flag is also set if the scan is not split.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213231.07e5a8a452ec.Ibf18f513e507422078fb31b28947e582a20df87a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Hide the internal scan fields from mac80211 and drivers, the
'notified' variable is for internal tracking, and the 'info'
is output that's passed to cfg80211_scan_done() and stored
only for delayed userspace notification.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213231.6a62e41858e2.I004f66e9c087cc6e6ae4a24951cf470961ee9466@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we get to the error path of ieee80211_prep_connection, for example
because of a FW issue, then ieee80211_vif_set_links is called
with 0.
But the call to drv_change_vif_links from ieee80211_vif_update_links
will probably fail as well, for the same reason.
In this case, the valid_links and active_links bitmaps will be reverted
to the value of the failing connection.
Then, in the next connection, due to the logic of
ieee80211_set_vif_links_bitmaps, valid_links will be set to the ID of
the new connection assoc link, but the active_links will remain with the
ID of the old connection's assoc link.
If those IDs are different, we get into a weird state of valid_links and
active_links being different. One of the consequences of this state is
to call drv_change_vif_links with new_links as 0, since the & operation
between the bitmaps will be 0.
Since a removal of a link should always succeed, ignore the return value
of drv_change_vif_links if it was called to only remove links, which is
the case for the ieee80211_prep_connection's error path.
That way, the bitmaps will not be reverted to have the value from the
failing connection and will have 0, so the next connection will have a
good state.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250609213231.ba2011fb435f.Id87ff6dab5e1cf757b54094ac2d714c656165059@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have an application that uses almost the same code for TCP and
AF_UNIX (SOCK_STREAM).
TCP can use TCP_INQ, but AF_UNIX doesn't have it and requires an
extra syscall, ioctl(SIOCINQ) or getsockopt(SO_MEMINFO) as an
alternative.
Let's introduce the generic version of TCP_INQ.
If SO_INQ is enabled, recvmsg() will put a cmsg of SCM_INQ that
contains the exact value of ioctl(SIOCINQ). The cmsg is also
included when msg->msg_get_inq is non-zero to make sockets
io_uring-friendly.
Note that SOCK_CUSTOM_SOCKOPT is flagged only for SOCK_STREAM to
override setsockopt() for SOL_SOCKET.
By having the flag in struct unix_sock, instead of struct sock, we
can later add SO_INQ support for TCP and reuse tcp_sk(sk)->recvmsg_inq.
Note also that supporting custom getsockopt() for SOL_SOCKET will need
preparation for other SOCK_CUSTOM_SOCKOPT users (UDP, vsock, MPTCP).
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250702223606.1054680-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Compared to TCP, ioctl(SIOCINQ) for AF_UNIX SOCK_STREAM socket is more
expensive, as unix_inq_len() requires iterating through the receive queue
and accumulating skb->len.
Let's cache the value for SOCK_STREAM to a new field during sendmsg()
and recvmsg().
The field is protected by the receive queue lock.
Note that ioctl(SIOCINQ) for SOCK_DGRAM returns the length of the first
skb in the queue.
SOCK_SEQPACKET still requires iterating through the queue because we do
not touch functions shared with unix_dgram_ops. But, if really needed,
we can support it by switching __skb_try_recv_datagram() to a custom
version.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250702223606.1054680-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit f75a2804da.
With all states (whether user or kern) removed from the hashtables
during deletion, there's no need for synchronous destruction of
states. xfrm6_tunnel states still need to have been destroyed (which
will be the case when its last user is deleted (not destroyed)) so
that xfrm6_tunnel_free_spi removes it from the per-netns hashtable
before the netns is destroyed.
This has the benefit of skipping one synchronize_rcu per state (in
__xfrm_state_destroy(sync=true)) when we exit a netns.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The ipcomp fallback tunnels currently get deleted (from the various
lists and hashtables) as the last user state that needed that fallback
is destroyed (not deleted). If a reference to that user state still
exists, the fallback state will remain on the hashtables/lists,
triggering the WARN in xfrm_state_fini. Because of those remaining
references, the fix in commit f75a2804da ("xfrm: destroy xfrm_state
synchronously on net exit path") is not complete.
We recently fixed one such situation in TCP due to defered freeing of
skbs (commit 9b6412e697 ("tcp: drop secpath at the same time as we
currently drop dst")). This can also happen due to IP reassembly: skbs
with a secpath remain on the reassembly queue until netns
destruction. If we can't guarantee that the queues are flushed by the
time xfrm_state_fini runs, there may still be references to a (user)
xfrm_state, preventing the timely deletion of the corresponding
fallback state.
Instead of chasing each instance of skbs holding a secpath one by one,
this patch fixes the issue directly within xfrm, by deleting the
fallback state as soon as the last user state depending on it has been
deleted. Destruction will still happen when the final reference is
dropped.
A separate lockdep class for the fallback state is required since
we're going to lock x->tunnel while x is locked.
Fixes: 9d4139c769 ("netns xfrm: per-netns xfrm_state_all list")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
tc_action_net_exit() got an rtnl exclusion in commit
a159d3c4b8 ("net_sched: acquire RTNL in tc_action_net_exit()")
Since then, commit 16af606739 ("net: sched: implement reference
counted action release") made this RTNL exclusion obsolete for
most cases.
Only tcf_action_offload_del() might still require it.
Move the rtnl locking into tcf_idrinfo_destroy() when
an offload action is found.
Most netns do not have actions, yet deleting them is adding a lot
of pressure on RTNL, which is for many the most contended mutex
in the kernel.
We are moving to a per-netns 'rtnl', so tc_action_net_exit()
will not be able to grab 'rtnl' a single time for a batch of netns.
Before the patch:
perf probe -a rtnl_lock
perf record -e probe:rtnl_lock -a /bin/bash -c 'unshare -n "/bin/true"; sleep 1'
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.305 MB perf.data (25 samples) ]
After the patch:
perf record -e probe:rtnl_lock -a /bin/bash -c 'unshare -n "/bin/true"; sleep 1'
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.304 MB perf.data (9 samples) ]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Buslov <vladbu@nvidia.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://patch.msgid.link/20250702071230.1892674-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change allows for gateway routing, where a route table entry
may reference a routable endpoint (by network and EID), instead of
routing directly to a netdevice.
We add support for a RTM_GATEWAY attribute for netlink route updates,
with an attribute format of:
struct mctp_fq_addr {
unsigned int net;
mctp_eid_t eid;
}
- we need the net here to uniquely identify the target EID, as we no
longer have the device reference directly (which would provide the net
id in the case of direct routes).
This makes route lookups recursive, as a route lookup that returns a
gateway route must be resolved into a direct route (ie, to a device)
eventually. We provide a limit to the route lookups, to prevent infinite
loop routing.
The route lookup populates a new 'nexthop' field in the dst structure,
which now specifies the key for the neighbour table lookup on device
output, rather than using the packet destination address directly.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-13-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we have the dst->haddr populated by sendmsg (when extended
addressing is in use), we no longer need to stash the link-layer address
in the skb->cb.
Instead, only use skb->cb for incoming lladdr data.
While we're at it: remove cb->src, as was never used.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-4-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change adds a struct mctp_dst, representing the result of a routing
lookup. This decouples the struct mctp_route from the actual
implementation of a routing operation.
This will allow for future routing changes which may require more
involved lookup logic, such as gateway routing - which may require
multiple traversals of the routing table.
Since we only use the struct mctp_route at lookup time, we no longer
hold routes over a routing operation, as we only need it to populate the
dst. However, we do hold the dev while the dst is active.
This requires some changes to the route test infrastructure, as we no
longer have a mock route to handle the route output operation, and
transient dsts are created by the routing code, so we can't override
them as easily.
Instead, we use kunit->priv to stash a packet queue, and a custom
dst_output function queues into that packet queue, which we can use for
later expectations.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-3-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stacking technology is a type of technology used to expand ports on
Ethernet switches. It is widely used as a common access method in
large-scale Internet data center architectures. Years of practice
have proved that stacking technology has advantages and disadvantages
in high-reliability network architecture scenarios. For instance,
in stacking networking arch, conventional switch system upgrades
require multiple stacked devices to restart at the same time.
Therefore, it is inevitable that the business will be interrupted
for a while. It is for this reason that "no-stacking" in data centers
has become a trend. Additionally, when the stacking link connecting
the switches fails or is abnormal, the stack will split. Although it is
not common, it still happens in actual operation. The problem is that
after the split, it is equivalent to two switches with the same
configuration appearing in the network, causing network configuration
conflicts and ultimately interrupting the services carried by the
stacking system.
To improve network stability, "non-stacking" solutions have been
increasingly adopted, particularly by public cloud providers and
tech companies like Alibaba, Tencent, and Didi. "non-stacking" is
a method of mimicing switch stacking that convinces a LACP peer,
bonding in this case, connected to a set of "non-stacked" switches
that all of its ports are connected to a single switch
(i.e., LACP aggregator), as if those switches were stacked. This
enables the LACP peer's ports to aggregate together, and requires
(a) special switch configuration, described in the linked article,
and (b) modifications to the bonding 802.3ad (LACP) mode to send
all ARP/ND packets across all ports of the active aggregator.
Note that, with multiple aggregators, the current broadcast mode
logic will send only packets to the selected aggregator(s).
+-----------+ +-----------+
| switch1 | | switch2 |
+-----------+ +-----------+
^ ^
| |
+-----------------+
| bond4 lacp |
+-----------------+
| |
| NIC1 | NIC2
+-----------------+
| server |
+-----------------+
- https://www.ruijie.com/fr-fr/support/tech-gallery/de-stack-data-center-network-architecture/
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Signed-off-by: Zengbing Tu <tuzengbing@didiglobal.com>
Link: https://patch.msgid.link/84d0a044514157bb856a10b6d03a1028c4883561.1751031306.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- hci_sync: Fix not disabling advertising instance
- hci_core: Remove check of BDADDR_ANY in hci_conn_hash_lookup_big_state
- hci_sync: Fix attempting to send HCI_Disconnect to BIS handle
- hci_event: Fix not marking Broadcast Sink BIS as connected
-----BEGIN PGP SIGNATURE-----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=o7T9
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-07-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: Fix not disabling advertising instance
- hci_core: Remove check of BDADDR_ANY in hci_conn_hash_lookup_big_state
- hci_sync: Fix attempting to send HCI_Disconnect to BIS handle
- hci_event: Fix not marking Broadcast Sink BIS as connected
* tag 'for-net-2025-07-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_event: Fix not marking Broadcast Sink BIS as connected
Bluetooth: hci_sync: Fix attempting to send HCI_Disconnect to BIS handle
Bluetooth: hci_core: Remove check of BDADDR_ANY in hci_conn_hash_lookup_big_state
Bluetooth: hci_sync: Fix not disabling advertising instance
====================
Link: https://patch.msgid.link/20250703160409.1791514-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The page pool members in struct page cannot be removed unless it's not
allowed to access any of them via struct page.
Do not access 'page->dma_addr' directly in page_pool_get_dma_addr() but
just wrap page_pool_get_dma_addr_netmem() safely.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20250702053256.4594-6-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current page_to_netmem() doesn't cover const casting resulting in
trying to cast const struct page * to const netmem_ref fails.
To cover the case, change page_to_netmem() to use macro and _Generic.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20250702053256.4594-5-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From commit 634f1a7110 ("vsock: support sockmap"), `struct proto
vsock_proto`, defined in af_vsock.c, is not static anymore, since it's
used by vsock_bpf.c.
If CONFIG_BPF_SYSCALL is not defined, `make C=2` will print a warning:
$ make O=build C=2 W=1 net/vmw_vsock/
...
CC [M] net/vmw_vsock/af_vsock.o
CHECK ../net/vmw_vsock/af_vsock.c
../net/vmw_vsock/af_vsock.c:123:14: warning: symbol 'vsock_proto' was not declared. Should it be static?
Declare `vsock_proto` regardless of CONFIG_BPF_SYSCALL, since it's defined
in af_vsock.c, which is built regardless of CONFIG_BPF_SYSCALL.
Fixes: 634f1a7110 ("vsock: support sockmap")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20250703112329.28365-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The check for destination to be BDADDR_ANY is no longer necessary with
the introduction of BIS_LINK.
Fixes: 23205562ff ("Bluetooth: separate CIS_LINK and BIS_LINK link types")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The DCCP socket family has now been removed from this tree, see:
8bb3212be4 ("Merge branch 'net-retire-dccp-socket'")
Remove connection tracking and NAT support for this protocol, this
should not pose a problem because no DCCP traffic is expected to be seen
on the wire.
As for the code for matching on dccp header for iptables and nftables,
mark it as deprecated and keep it in place. Ruleset restoration is an
atomic operation. Without dccp matching support, an astray match on dccp
could break this operation leaving your computer with no policy in
place, so let's follow a more conservative approach for matches.
Add CONFIG_NFT_EXTHDR_DCCP which is set to 'n' by default to deprecate
dccp extension support. Similarly, label CONFIG_NETFILTER_XT_MATCH_DCCP
as deprecated too and also set it to 'n' by default.
Code to match on DCCP protocol from ebtables also remains in place, this
is just a few checks on IPPROTO_DCCP from _check() path which is
exercised when ruleset is loaded. There is another use of IPPROTO_DCCP
from the _check() path in the iptables multiport match. Another check
for IPPROTO_DCCP from the packet in the reject target is also removed.
So let's schedule removal of the dccp matching for a second stage, this
should not interfer with the dccp retirement since this is only matching
on the dccp header.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Introduce support for specifying relative bandwidth shares between
traffic classes (TC) in the devlink-rate API. This new option allows
users to allocate bandwidth across multiple traffic classes in a
single command.
This feature provides a more granular control over traffic management,
especially for scenarios requiring Enhanced Transmission Selection.
Users can now define a relative bandwidth share for each traffic class.
For example, assigning share values of 20 to TC0 (TCP/UDP) and 80 to TC5
(RoCE) will result in TC0 receiving 20% and TC5 receiving 80% of the
total bandwidth. The actual percentage each class receives depends on
the ratio of its share value to the sum of all shares.
Example:
DEV=pci/0000:08:00.0
$ devlink port function rate add $DEV/vfs_group tx_share 10Gbit \
tx_max 50Gbit tc-bw 0:20 1:0 2:0 3:0 4:0 5:80 6:0 7:0
$ devlink port function rate set $DEV/vfs_group \
tc-bw 0:20 1:0 2:0 3:0 4:0 5:20 6:60 7:0
Example usage with ynl:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-set --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1,
"rate-tc-bws": [
{"rate-tc-index": 0, "rate-tc-bw": 50},
{"rate-tc-index": 1, "rate-tc-bw": 50},
{"rate-tc-index": 2, "rate-tc-bw": 0},
{"rate-tc-index": 3, "rate-tc-bw": 0},
{"rate-tc-index": 4, "rate-tc-bw": 0},
{"rate-tc-index": 5, "rate-tc-bw": 0},
{"rate-tc-index": 6, "rate-tc-bw": 0},
{"rate-tc-index": 7, "rate-tc-bw": 0}
]
}'
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-get --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1
}'
output for rate-get:
{'bus-name': 'pci',
'dev-name': '0000:08:00.0',
'port-index': 1,
'rate-tc-bws': [{'rate-tc-bw': 50, 'rate-tc-index': 0},
{'rate-tc-bw': 50, 'rate-tc-index': 1},
{'rate-tc-bw': 0, 'rate-tc-index': 2},
{'rate-tc-bw': 0, 'rate-tc-index': 3},
{'rate-tc-bw': 0, 'rate-tc-index': 4},
{'rate-tc-bw': 0, 'rate-tc-index': 5},
{'rate-tc-bw': 0, 'rate-tc-index': 6},
{'rate-tc-bw': 0, 'rate-tc-index': 7}],
'rate-tx-max': 0,
'rate-tx-priority': 0,
'rate-tx-share': 0,
'rate-tx-weight': 0,
'rate-type': 'leaf'}
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the nlmsg_for_each_attr_type() macro to simplify iteration over
attributes of a specific type in a Netlink message.
Convert existing users in vxlan and nfsd to use the new macro.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new helpers as a step to deal with potential dst->dev races.
v2: fix typo in ipv6_rthdr_rcv() (kernel test robot <lkp@intel.com>)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new helper as a step to deal with potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new helpers as a first step to deal with
potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst->dev is read locklessly in many contexts,
and written in dst_dev_put().
Fixing all the races is going to need many changes.
We probably will have to add full RCU protection.
Add three helpers to ease this painful process.
static inline struct net_device *dst_dev(const struct dst_entry *dst)
{
return READ_ONCE(dst->dev);
}
static inline struct net_device *skb_dst_dev(const struct sk_buff *skb)
{
return dst_dev(skb_dst(skb));
}
static inline struct net *skb_dst_dev_net(const struct sk_buff *skb)
{
return dev_net(skb_dst_dev(skb));
}
static inline struct net *skb_dst_dev_net_rcu(const struct sk_buff *skb)
{
return dev_net_rcu(skb_dst_dev(skb));
}
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst_dev_put() can overwrite dst->output while other
cpus might read this field (for instance from dst_output())
Add READ_ONCE()/WRITE_ONCE() annotations to suppress
potential issues.
We will likely need RCU protection in the future.
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst_dev_put() can overwrite dst->input while other
cpus might read this field (for instance from dst_input())
Add READ_ONCE()/WRITE_ONCE() annotations to suppress
potential issues.
We will likely need full RCU protection later.
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(dst_entry)->lastuse is read and written locklessly,
add corresponding annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(dst_entry)->expires is read and written locklessly,
add corresponding annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
____cacheline_aligned_in_smp attribute only makes sure to align
a field to a cache line. It does not prevent the linker to use
the remaining of the cache line for other variables, causing
potential false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
____cacheline_aligned_in_smp attribute only makes sure to align
a field to a cache line. It does not prevent the linker to use
the remaining of the cache line for other variables, causing
potential false sharing.
Move tcp_memory_allocated into a dedicated cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using per-cpu data for net->net_cookie generation is overkill,
because even busy hosts do not create hundreds of netns per second.
Make sure to put net_cookie in a private cache line to avoid
potential false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This structure will hold networking data that must
consume a full cache line to avoid accidental false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upon receiving the Reset Request, pause the connection and clean up
queues, wait for the specified period, then resume the NIC.
In the cleanup phase, the HWC is no longer responding, so set hwc_timeout
to zero to skip waiting on the response.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1751055983-29760-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tl;dr
=====
Add a new neighbor flag ("extern_valid") that can be used to indicate to
the kernel that a neighbor entry was learned and determined to be valid
externally. The kernel will not try to remove or invalidate such an
entry, leaving these decisions to the user space control plane. This is
needed for EVPN multi-homing where a neighbor entry for a multi-homed
host needs to be synced across all the VTEPs among which the host is
multi-homed.
Background
==========
In a typical EVPN multi-homing setup each host is multi-homed using a
set of links called ES (Ethernet Segment, i.e., LAG) to multiple leaf
switches (VTEPs). VTEPs that are connected to the same ES are called ES
peers.
When a neighbor entry is learned on a VTEP, it is distributed to both ES
peers and remote VTEPs using EVPN MAC/IP advertisement routes. ES peers
use the neighbor entry when routing traffic towards the multi-homed host
and remote VTEPs use it for ARP/NS suppression.
Motivation
==========
If the ES link between a host and the VTEP on which the neighbor entry
was locally learned goes down, the EVPN MAC/IP advertisement route will
be withdrawn and the neighbor entries will be removed from both ES peers
and remote VTEPs. Routing towards the multi-homed host and ARP/NS
suppression can fail until another ES peer locally learns the neighbor
entry and distributes it via an EVPN MAC/IP advertisement route.
"draft-rbickhart-evpn-ip-mac-proxy-adv-03" [1] suggests avoiding these
intermittent failures by having the ES peers install the neighbor
entries as before, but also injecting EVPN MAC/IP advertisement routes
with a proxy indication. When the previously mentioned ES link goes down
and the original EVPN MAC/IP advertisement route is withdrawn, the ES
peers will not withdraw their neighbor entries, but instead start aging
timers for the proxy indication.
If an ES peer locally learns the neighbor entry (i.e., it becomes
"reachable"), it will restart its aging timer for the entry and emit an
EVPN MAC/IP advertisement route without a proxy indication. An ES peer
will stop its aging timer for the proxy indication if it observes the
removal of the proxy indication from at least one of the ES peers
advertising the entry.
In the event that the aging timer for the proxy indication expired, an
ES peer will withdraw its EVPN MAC/IP advertisement route. If the timer
expired on all ES peers and they all withdrew their proxy
advertisements, the neighbor entry will be completely removed from the
EVPN fabric.
Implementation
==============
In the above scheme, when the control plane (e.g., FRR) advertises a
neighbor entry with a proxy indication, it expects the corresponding
entry in the data plane (i.e., the kernel) to remain valid and not be
removed due to garbage collection or loss of carrier. The control plane
also expects the kernel to notify it if the entry was learned locally
(i.e., became "reachable") so that it will remove the proxy indication
from the EVPN MAC/IP advertisement route. That is why these entries
cannot be programmed with dummy states such as "permanent" or "noarp".
Instead, add a new neighbor flag ("extern_valid") which indicates that
the entry was learned and determined to be valid externally and should
not be removed or invalidated by the kernel. The kernel can probe the
entry and notify user space when it becomes "reachable" (it is initially
installed as "stale"). However, if the kernel does not receive a
confirmation, have it return the entry to the "stale" state instead of
the "failed" state.
In other words, an entry marked with the "extern_valid" flag behaves
like any other dynamically learned entry other than the fact that the
kernel cannot remove or invalidate it.
One can argue that the "extern_valid" flag should not prevent garbage
collection and that instead a neighbor entry should be programmed with
both the "extern_valid" and "extern_learn" flags. There are two reasons
for not doing that:
1. Unclear why a control plane would like to program an entry that the
kernel cannot invalidate but can completely remove.
2. The "extern_learn" flag is used by FRR for neighbor entries learned
on remote VTEPs (for ARP/NS suppression) whereas here we are
concerned with local entries. This distinction is currently irrelevant
for the kernel, but might be relevant in the future.
Given that the flag only makes sense when the neighbor has a valid
state, reject attempts to add a neighbor with an invalid state and with
this flag set. For example:
# ip neigh add 192.0.2.1 nud none dev br0.10 extern_valid
Error: Cannot create externally validated neighbor with an invalid state.
# ip neigh add 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid
# ip neigh replace 192.0.2.1 nud failed dev br0.10 extern_valid
Error: Cannot mark neighbor as externally validated with an invalid state.
The above means that a neighbor cannot be created with the
"extern_valid" flag and flags such as "use" or "managed" as they result
in a neighbor being created with an invalid state ("none") and
immediately getting probed:
# ip neigh add 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid use
Error: Cannot create externally validated neighbor with an invalid state.
However, these flags can be used together with "extern_valid" after the
neighbor was created with a valid state:
# ip neigh add 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid
# ip neigh replace 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid use
One consequence of preventing the kernel from invalidating a neighbor
entry is that by default it will only try to determine reachability
using unicast probes. This can be changed using the "mcast_resolicit"
sysctl:
# sysctl net.ipv4.neigh.br0/10.mcast_resolicit
0
# tcpdump -nn -e -i br0.10 -Q out arp &
# ip neigh replace 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid use
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
# sysctl -wq net.ipv4.neigh.br0/10.mcast_resolicit=3
# ip neigh replace 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid use
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
iproute2 patches can be found here [2].
[1] https://datatracker.ietf.org/doc/html/draft-rbickhart-evpn-ip-mac-proxy-adv-03
[2] https://github.com/idosch/iproute2/tree/submit/extern_valid_v1
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250626073111.244534-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
inet_rtx_syn_ack() is a simple wrapper around tcp_rtx_synack(),
if we move req->num_retrans update.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250626153017.2156274-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now inet_rtx_syn_ack() is only used by TCP, it can directly
call tcp_rtx_synack() instead of using an indirect call
to req->rsk_ops->rtx_syn_ack().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250626153017.2156274-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit c54e1d920f ("flow_offload: add ops to tc_action_ops for
flow action setup") these are unused.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250624014327.3686873-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While configuring a vxlan tunnel in a system with a i40e NIC driver, I
observe the following deadlock:
WARNING: possible recursive locking detected
6.16.0-rc2.net-next-6.16_92d87230d899+ #13 Tainted: G E
--------------------------------------------
kworker/u256:4/1125 is trying to acquire lock:
ffff88921ab9c8c8 (&utn->lock){+.+.}-{4:4}, at: i40e_udp_tunnel_set_port (/home/pabeni/net-next/include/net/udp_tunnel.h:343 /home/pabeni/net-next/drivers/net/ethernet/intel/i40e/i40e_main.c:13013) i40e
but task is already holding lock:
ffff88921ab9c8c8 (&utn->lock){+.+.}-{4:4}, at: udp_tunnel_nic_device_sync_work (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:739) udp_tunnel
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&utn->lock);
lock(&utn->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by kworker/u256:4/1125:
#0: ffff8892910ca158 ((wq_completion)udp_tunnel_nic){+.+.}-{0:0}, at: process_one_work (/home/pabeni/net-next/kernel/workqueue.c:3213)
#1: ffffc900244efd30 ((work_completion)(&utn->work)){+.+.}-{0:0}, at: process_one_work (/home/pabeni/net-next/kernel/workqueue.c:3214)
#2: ffffffff9a14e290 (rtnl_mutex){+.+.}-{4:4}, at: udp_tunnel_nic_device_sync_work (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:737) udp_tunnel
#3: ffff88921ab9c8c8 (&utn->lock){+.+.}-{4:4}, at: udp_tunnel_nic_device_sync_work (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:739) udp_tunnel
stack backtrace:
Hardware name: Dell Inc. PowerEdge R7525/0YHMCJ, BIOS 2.2.5 04/08/2021
i
Call Trace:
<TASK>
dump_stack_lvl (/home/pabeni/net-next/lib/dump_stack.c:123)
print_deadlock_bug (/home/pabeni/net-next/kernel/locking/lockdep.c:3047)
validate_chain (/home/pabeni/net-next/kernel/locking/lockdep.c:3901)
__lock_acquire (/home/pabeni/net-next/kernel/locking/lockdep.c:5240)
lock_acquire.part.0 (/home/pabeni/net-next/kernel/locking/lockdep.c:473 /home/pabeni/net-next/kernel/locking/lockdep.c:5873)
__mutex_lock (/home/pabeni/net-next/kernel/locking/mutex.c:604 /home/pabeni/net-next/kernel/locking/mutex.c:747)
i40e_udp_tunnel_set_port (/home/pabeni/net-next/include/net/udp_tunnel.h:343 /home/pabeni/net-next/drivers/net/ethernet/intel/i40e/i40e_main.c:13013) i40e
udp_tunnel_nic_device_sync_by_port (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:230 /home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:249) udp_tunnel
__udp_tunnel_nic_device_sync.part.0 (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:292) udp_tunnel
udp_tunnel_nic_device_sync_work (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:742) udp_tunnel
process_one_work (/home/pabeni/net-next/kernel/workqueue.c:3243)
worker_thread (/home/pabeni/net-next/kernel/workqueue.c:3315 /home/pabeni/net-next/kernel/workqueue.c:3402)
kthread (/home/pabeni/net-next/kernel/kthread.c:464)
AFAICS all the existing callsites of udp_tunnel_nic_set_port_priv() are
already under the utn lock scope, avoid (re-)acquiring it in such a
function.
Fixes: 1ead750109 ("udp_tunnel: remove rtnl_lock dependency")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/95a827621ec78c12d1564ec3209e549774f9657d.1750675978.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for updating the stations S1G capabilities when
an S1G association occurs.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250617080610.756048-3-lachlan.hodges@morsemicro.com
[remove unused S1G_CAP3_MAX_MPDU_LEN_3895/_7791]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently there is no support for initialising a peers S1G capabilities,
this patch adds support for configuring an S1G station.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250617080610.756048-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, setting RTS threshold is based on per-phy basis, i.e., all the
radios present in a wiphy will take RTS threshold value to be the one sent
from userspace. But each radio in a multi-radio wiphy can have different
RTS threshold requirements.
To extend support to set RTS threshold for each radio, get the radio for
which RTS threshold needs to be changed from the user. Use the attribute
in NL - NL80211_ATTR_WIPHY_RADIO_INDEX, to identify the radio of interest.
Create a new structure - wiphy_radio_cfg and add rts_threshold in it as a
u32 value to store RTS threshold of each radio in a wiphy and allocate
memory for it during wiphy register based on the wiphy.n_radio updated by
drivers. Pass radio id received from the user to mac80211 drivers along
with its corresponding RTS threshold.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-3-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.
To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM
By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, link station statistics for MLO are filled by mac80211.
But there are some statistics that kept by mac80211 might not be
accurate, so let the driver pre-fill the link statistics. The driver
can fill the values (indicating which field is filled, by setting the
filled bitmapin in link_station structure).
Statistics that driver don't fill are filled by mac80211.
Hence, add link_sta_statistics callback to fill link station statistics
for MLO in sta_set_link_sinfo() by drivers.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-11-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, sinfo structure is supported to fill information at
deflink( or one of the links) level for station. This has problems
when applied to fetch multi-link(ML) station information.
Hence, if valid_links are present, support filling link_station
structure for each link.
This will be helpful to check the link related statistics during MLO.
Additionally, TXQ stats for pertid are applicable at station level
not at link level. Therefore check link_id is less then 0, before
filling TXQ stats in pertid stats.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-9-quic_sarishar@quicinc.com
[fix some indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, station_info structure is passed to fill station statistics
from mac80211/drivers. After NL message send to user space for requested
station statistics, memory for station statistics is freed in cfg80211.
Therefore, memory allocation/free for link station statistics should
also happen in cfg80211 only.
Hence, allocate the memory for link_station structure for all
possible links and free in cfg80211_sinfo_release_content().
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-6-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Current implementation of NL80211_GET_STATION does not work for
multi-link operation(MLO) since in case of MLO only deflink (or one
of the links) is considered and not all links.
Therefore to support for MLO, add link_station_info structure
to account link level statistics for station.
Additionally, add valid_links in station_info structure to indicate
bitmap of valid links for MLO. This will be helpful to check the link
related statistics during MLO.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-3-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in supporting API's to fill sinfo structure from sta
structure, is mapped to fill the fields from sta->deflink. However,
for multi-link (ML) station, sinfo structure should be filled from
corresponding link_id.
Therefore, add link_id as an additional argument in supporting API's
for filling sinfo structure correctly. Link_id is set to -1 for non-ML
station and corresponding link_id for ML stations. In supporting API's
for filling sinfo structure, check for link_id, if link_id < 0, fill
the sinfo structure from sta->deflink, otherwise fill from
sta->link[link_id].
Current, changes are done at the deflink level i.e, pass -1 as link_id.
Actual link_id will be added in subsequent patches to support
station statistics for MLO.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-2-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The symbol names in the .modinfo section are never used and already
randomized by the __UNIQUE_ID() macro.
Therefore, the second parameter of __MODULE_INFO() is meaningless
and can be removed to simplify the code.
With this change, the symbol names in the .modinfo section will be
prefixed with __UNIQUE_ID_modinfo, making it clearer that they
originate from MODULE_INFO().
[Before]
$ objcopy -j .modinfo vmlinux.o modinfo.o
$ nm -n modinfo.o | head -n10
0000000000000000 r __UNIQUE_ID_license560
0000000000000011 r __UNIQUE_ID_file559
0000000000000030 r __UNIQUE_ID_description558
0000000000000074 r __UNIQUE_ID_license580
000000000000008e r __UNIQUE_ID_file579
00000000000000bd r __UNIQUE_ID_description578
00000000000000e6 r __UNIQUE_ID_license581
00000000000000ff r __UNIQUE_ID_file580
0000000000000134 r __UNIQUE_ID_description579
0000000000000179 r __UNIQUE_ID_uncore_no_discover578
[After]
$ objcopy -j .modinfo vmlinux.o modinfo.o
$ nm -n modinfo.o | head -n10
0000000000000000 r __UNIQUE_ID_modinfo560
0000000000000011 r __UNIQUE_ID_modinfo559
0000000000000030 r __UNIQUE_ID_modinfo558
0000000000000074 r __UNIQUE_ID_modinfo580
000000000000008e r __UNIQUE_ID_modinfo579
00000000000000bd r __UNIQUE_ID_modinfo578
00000000000000e6 r __UNIQUE_ID_modinfo581
00000000000000ff r __UNIQUE_ID_modinfo580
0000000000000134 r __UNIQUE_ID_modinfo579
0000000000000179 r __UNIQUE_ID_modinfo578
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Followup of commit 285975dd67 ("net: annotate data-races around
sk->sk_{rcv|snd}timeo").
Remove lock_sock()/release_sock() from ksmbd_tcp_rcv_timeout()
and add READ_ONCE()/WRITE_ONCE() where it is needed.
Also SO_RCVTIMEO_OLD and SO_RCVTIMEO_NEW can call sock_set_timeout()
without holding the socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250620155536.335520-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Followup of commit 285975dd67 ("net: annotate data-races around
sk->sk_{rcv|snd}timeo").
Remove lock_sock()/release_sock() from sock_set_sndtimeo(),
and add READ_ONCE()/WRITE_ONCE() where it is needed.
Also SO_SNDTIMEO_OLD and SO_SNDTIMEO_NEW can call sock_set_timeout()
without holding the socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250620155536.335520-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Difference between sock_i_uid() and sk_uid() is that
after sock_orphan(), sock_i_uid() returns GLOBAL_ROOT_UID
while sk_uid() returns the last cached sk->sk_uid value.
None of sock_i_uid() callers care about this.
Use sk_uid() which is much faster and inlined.
Note that diag/dump users are calling sock_i_ino() and
can not see the full benefit yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20250620133001.4090592-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_uid can be read while another thread changes its
value in sockfs_setattr().
Add sk_uid(const struct sock *sk) helper to factorize the needed
READ_ONCE() annotations, and add corresponding WRITE_ONCE()
where needed.
Fixes: 86741ec254 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20250620133001.4090592-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit 587ae086f6 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718
CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
skb_queue_purge include/linux/skbuff.h:3368 [inline]
vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69
hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline]
hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592
sock_do_ioctl+0xd9/0x300 net/socket.c:1190
sock_ioctl+0x576/0x790 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf5b98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929
RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009
RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528
</TASK>
Allocated by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635
misc_open+0x2bc/0x330 drivers/char/misc.c:161
chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414
do_dentry_open+0xdf0/0x1970 fs/open.c:964
vfs_open+0x3b/0x340 fs/open.c:1094
do_open fs/namei.c:3887 [inline]
path_openat+0x2ee5/0x3830 fs/namei.c:4046
do_filp_open+0x1fa/0x410 fs/namei.c:4073
do_sys_openat2+0x121/0x1c0 fs/open.c:1437
do_sys_open fs/open.c:1452 [inline]
__do_sys_openat fs/open.c:1468 [inline]
__se_sys_openat fs/open.c:1463 [inline]
__x64_sys_openat+0x138/0x170 fs/open.c:1463
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x18e/0x440 mm/slub.c:4842
vhci_release+0xbc/0xd0 drivers/bluetooth/hci_vhci.c:671
__fput+0x44c/0xa70 fs/file_table.c:465
task_work_run+0x1d1/0x260 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x6ad/0x22e0 kernel/exit.c:955
do_group_exit+0x21c/0x2d0 kernel/exit.c:1104
__do_sys_exit_group kernel/exit.c:1115 [inline]
__se_sys_exit_group kernel/exit.c:1113 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1113
x64_sys_call+0x21ba/0x21c0 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff88807cb8d800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 88 bytes inside of
freed 1024-byte region [ffff88807cb8d800, ffff88807cb8dc00)
Fixes: bf18c7118c ("Bluetooth: vhci: Free driver_data on file release")
Reported-by: syzbot+2faa4825e556199361f9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f62d64848fc4c7c30cd6
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the case of SME-in-driver, the driver can internally choose to
update the links based on the AP MLD recommendation and do link
reconfiguration negotiation with AP MLD.
(e.g., After the driver processing the BSS Transition Management request
frame received from the AP MLD with Neighbor Report containing
Multi-Link element with recommended links information chooses to do link
reconfiguration negotiation with AP MLD).
To support this, extend cfg80211_mlo_reconf_add_done() and
NL80211_CMD_ASSOC_MLO_RECONF to indicate added links information for
driver-initiated link reconfiguration requests. For removed links,
the driver indicates links information using the
NL80211_CMD_LINKS_REMOVED event for driver-initiated cases, the same as
supplicant initiated cases.
For the driver-initiated case, cfg80211 will receive link
reconfiguration result asynchronously from driver so holding BSSes of
the accepted add links is needed in the event path. Also, no need of
unhold call for the rejected add link BSSes since there was no hold call
happened previously.
Once the supplicant receives the NL80211_CMD_ASSOC_MLO_RECONF event,
it needs to process the information about newly added links and install
per-link group keys (e.g., GTK/IGTK/BIGTK etc.).
In case of the SME-in-driver, using a vendor interface etc. to notify
the supplicant to initiate a link reconfiguration request and then
supplicant sending command to the cfg80211 can lead to race conditions.
The correct design to avoid this is that the driver indicates the
cfg80211 directly with the results of the link reconfiguration
negotiation.
Signed-off-by: Kavita Kavita <quic_kkavita@quicinc.com>
Link: https://patch.msgid.link/20250604105757.2542-3-quic_kkavita@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add utility API cfg80211_get_radio_idx_by_chan() to retrieve the radio
index corresponding to a given channel in a multi-radio wiphy.
This utility function can be used when we want to check the radio-specific
data for a channel in a multi-radio wiphy. For example, it can help
determine the radio index required to handle a scan request. This index
can then be used to decide whether the scan can proceed without
interfering with ongoing DFS operations on another radio.
Signed-off-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-1-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As discussesd before in [0] proxy entries (which are more configuration
than runtime data) should stay when the link (carrier) goes does down.
This is what happens for regular neighbour entries.
So lets fix this by:
- storing in proxy entries the fact that it was added as NUD_PERMANENT
- not removing NUD_PERMANENT proxy entries when the carrier goes down
(same as how it's done in neigh_flush_dev() for regular neigh entries)
[0]: https://lore.kernel.org/netdev/c584ef7e-6897-01f3-5b80-12b53f7b4bf4@kernel.org/
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250617141334.3724863-1-nico.escande@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If any of the HWC commands are not recognized by the
underlying hardware, the hardware returns the response
header status of -1. Log the information using
netdev_info_once to avoid multiple error logs in dmesg.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-5-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.
The driver retrieves this information by issuing a
HWC command to the hardware via mana_query_link_cfg(),
which retrieves the SKU's maximum supported speed.
These APIs when invoked on hardware that are older/do
not support these APIs, the speed would be reported as UNKNOWN.
Before:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
After:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 16000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for net_shaper_ops in the MANA driver,
enabling configuration of rate limiting on the MANA NIC.
To apply rate limiting, the driver issues a HWC command via
mana_set_bw_clamp() and updates the corresponding shaper object
in the net_shaper cache. If an error occurs during this process,
the driver restores the previous speed by querying the current link
configuration using mana_query_link_cfg().
The minimum supported bandwidth is 100 Mbps, and only values that are
exact multiples of 100 Mbps are allowed. Any other values are rejected.
To remove a shaper, the driver resets the bandwidth to the maximum
supported by the SKU using mana_set_bw_clamp() and clears the
associated cache entry. If an error occurs during this process,
the shaper details are retained.
On the hardware that does not support these APIs, the net-shaper
calls to set speed would fail.
Set the speed:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do set --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' },
"bw-max": 200000000 }'
Get the shaper details:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do get --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' }}'
> {'bw-max': 200000000,
> 'handle': {'scope': 'netdev'},
> 'ifindex': $IFINDEX,
> 'metric': 'bps'}
Delete the shaper object:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do delete --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev","id":'$ID' }}'
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a new device generic parameter to enable/disable the
PHC (PTP Hardware Clock) functionality in the device associated
with the devlink instance.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250617110545.5659-6-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers that are using ops lock and don't depend on RTNL lock
still need to manage it because udp_tunnel's RTNL dependency.
Introduce new udp_tunnel_nic_lock and use it instead of
rtnl_lock. Drop non-UDP_TUNNEL_NIC_INFO_MAY_SLEEP mode from
udp_tunnel infra (udp_tunnel_nic_device_sync_work needs to
grab udp_tunnel_nic_lock mutex and might sleep).
Cover more places in v4:
- netlink
- udp_tunnel_notify_add_rx_port (ndo_open)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_notify_del_rx_port (ndo_stop)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_get_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- udp_tunnel_drop_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- udp_tunnel_nic_reset_ntf (ndo_open)
- notifiers
- udp_tunnel_nic_netdevice_event, depending on the event:
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- ethnl_tunnel_info_reply_size
- udp_tunnel_nic_set_port_priv (two intel drivers)
Cc: Michael Chan <michael.chan@broadcom.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250616162117.287806-4-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
libeth: add libeth_xdp helper lib
Alexander Lobakin says:
Time to add XDP helpers infra to libeth to greatly simplify adding
XDP to idpf and iavf, as well as improve and extend XDP in ice and
i40e. Any vendor is free to reuse helpers. If this happens, I'm fine
with moving the folder of out intel/.
The helpers greatly simplify building xdp_buff, running a prog,
handling the verdict, implement XDP_TX, .ndo_xdp_xmit, XDP buffer
completion. Same applies to XSk (with XSk xmit instead of
.ndo_xdp_xmit, plus stuff like XSk wakeup).
They are entirely generic with no HW definitions or assumptions.
HW-specific stuff like parsing Rx desc / filling Tx desc is passed
from the driver as inline callbacks.
For now, key assumptions that optimize performance / avoid code
bloat, but might not fit every driver in driver/net/:
* netmem holding the buffers are always order-0;
* driver has separate XDP Tx queues, doesn't use stack queues for
that. For best efficiency, you may want to have nr_cpu_ids XDP
queues, but less (queue sharing) is also supported;
* XDP Tx queues are interrupt-less and use "lazy" cleaning only
when there are less than 1/4 free Tx descriptors of the queue
size;
* main target platforms are 64-bit, although 32-bit is also fully
supported, but the code might be not as optimized for them.
Library code already supports multi-buffer for all kinds of Tx and
both header split and no split for Rx and Tx. Frags can come from
devmem/io_uring etc., direct `struct page *` is used only for header
buffers for which it's always true.
Drivers are free to pass their own Rx hints and XSK xmit hints ops.
XDP_TX and ndo_xdp_xmit use onstack bulk for the frames to be sent
and send them by batches of 16 buffers. This eats ~280 bytes on the
stack, but gives good boosts and allow to greatly optimize the main
sending function leaving it without any error/exception paths.
XSk xmit fills Tx descriptors in the loop unrolled by 8. This was
proven to improve perf on ice and i40e. XDP_TX and ndo_xdp_xmit
doesn't use unrolling as I wasn't able to get any improvements in
those scenenarios from this, while +1 Kb for their sending functions
for nothing doesn't sound reasonable.
XSk wakeup, instead of traditionally used "SW interrupts" provided
by NICs, uses IPI to schedule NAPI on the CPU corresponding to the
given queue pair. It gives better control over CPU distribution and
in general performs way better than "SW interrupts", plus allows us
to not pass any HW-specific callbacks there.
The code is built the way that all callbacks passed from drivers
get inlined; in general, most of hotpath gets inlined. Everything
slow/exception lands to .c files in the libeth folder, doesn't
create copies in the drivers themselves and doesn't overloat
hotpath.
Sure, inlining means that hotpath will be compiled into every driver
that uses the lib, but the core code is written in one place, so no
copying of bugs happens. Fixed once -- works everywhere.
The last commit might look like sorta hack, but it gives really good
boosts and decreases object code size, plus there are checks that
all those wider accesses are fully safe, so I don't feel anything
bad about it.
An example of using libeth_xdp can be found either on my GitHub or
on the mailing lists here ("XDP for idpf"). Macros for building
driver XDP functions lead to that some implementations (XDP_TX,
ndo_xdp_xmit etc.) consist of really only a few lines.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
libeth: xdp, xsk: access adjacent u32s as u64 where applicable
libeth: xsk: add XSkFQ refill and XSk wakeup helpers
libeth: xsk: add XSk Rx processing support
libeth: xsk: add XSk xmit functions
libeth: xsk: add XSk XDP_TX sending helpers
libeth: xdp: add RSS hash hint and XDP features setup helpers
libeth: xdp: add templates for building driver-side callbacks
libeth: xdp: add XDP prog run and verdict result handling
libeth: xdp: add helpers for preparing/processing &libeth_xdp_buff
libeth: xdp: add XDPSQ cleanup timers
libeth: xdp: add XDPSQ locking helpers
libeth: xdp: add XDPSQE completion helpers
libeth: xdp: add .ndo_xdp_xmit() helpers
libeth: xdp: add XDP_TX buffers sending
libeth: support native XDP and register memory model
libeth: convert to netmem
libeth, libie: clean symbol exports up a little
====================
Link: https://patch.msgid.link/20250616201639.710420-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the netmem counterpart of page_pool_dev_alloc_pages() which
uses the default GFP flags for RX.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts TCP Small Queues implementation from tasklet to BH
workqueue.
Semantically, this is an equivalent conversion and there shouldn't be any
user-visible behavior changes. While workqueue's queueing and execution
paths are a bit heavier than tasklet's, unless the work item is being queued
every packet, the difference hopefully shouldn't matter.
My experience with the networking stack is very limited and this patch
definitely needs attention from someone who actually understands networking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/aFBeJ38AS1ZF3Dq5@slm.duckdns.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Locally-generated MC packets have so far not been subject to MC routing.
Instead an MC-enabled installation would maintain the MC routing tables,
and separately from that the list of interfaces to send packets to as part
of the VXLAN FDB and MDB.
In a previous patch, a ip_mr_output() and ip6_mr_output() routines were
added for IPv4 and IPv6. All locally generated MC traffic is now passed
through these functions. For reasons of backward compatibility, an SKB
(IPCB / IP6CB) flag guards the actual MC routing.
This patch adds logic to set the flag, and the UAPI to enable the behavior.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/d899655bb7e9b2521ee8c793e67056b9fd02ba12.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6tunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IP6CB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel6_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IPv6 multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/acb4f9f3e40c3a931236c3af08a720b017fbfbfb.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function always returns zero, thus the return value does not carry any
signal. Just make it void.
Most callers already ignore the return value. However:
- Refold arguments of the call from sctp_v6_xmit() so that they fit into
the 80-column limit.
- tipc_udp_xmit() initializes err from the return value, but that should
already be always zero at that point. So there's no practical change, but
elision of the assignment prompts a couple more tweaks to clean up the
function.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/7facacf9d8ca3ca9391a4aee88160913671b868d.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multicast routing is today handled in the input path. Locally generated MC
packets don't hit the IPMR code today. Thus if a VXLAN remote address is
multicast, the driver needs to set an OIF during route lookup. Thus MC
routing configuration needs to be kept in sync with the VXLAN FDB and MDB.
Ideally, the VXLAN packets would be routed by the MC routing code instead.
To that end, this patch adds support to route locally generated multicast
packets. The newly-added routines do largely what ip_mr_input() and
ip_mr_forward() do: make an MR cache lookup to find where to send the
packets, and use ip_mc_output() to send each of them. When no cache entry
is found, the packet is punted to the daemon for resolution.
However, an installation that uses a VXLAN underlay netdevice for which it
also has matching MC routes, would get a different routing with this patch.
Previously, the MC packets would be delivered directly to the underlay
port, whereas now they would be MC-routed. In order to avoid this change in
behavior, introduce an IPCB flag. Only if the flag is set will
ip_mr_output() actually engage, otherwise it reverts to ip_mc_output().
This code is based on work by Roopa Prabhu and Nikolay Aleksandrov.
Signed-off-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/0aadbd49330471c0f758d54afb05eb3b6e3a6b65.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iptunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IPCB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IP multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Trivial fix to a couple of outdated netmem comments. No code changes,
just more accurately describing current code.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250615203511.591438-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for legacy Broadcom FCS tags, which are similar to
DSA_TAG_PROTO_BRCM_LEGACY.
BCM5325 and BCM5365 switches require including the original FCS value and
length, as opposed to BCM63xx switches.
Adding the original FCS value and length to DSA_TAG_PROTO_BRCM_LEGACY would
impact performance of BCM63xx switches, so it's better to create a new tag.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-3-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have removed the RFC3517/RFC6675 hints,
tcp_clear_retrans_hints_partial() is empty, and can be removed.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-4-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that obsolete RFC3517/RFC6675 TCP loss detection has been removed,
we can remove the somewhat complex and intrusive code to maintain its
hint state: lost_skb_hint and lost_cnt_hint.
This commit makes tcp_clear_retrans_hints_partial() empty. We will
remove tcp_clear_retrans_hints_partial() and its call sites in the
next commit.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-3-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Begunkov says:
====================
io_uring cmd for tx timestamps (part)
Apply the networking helpers for the io_uring timestamp API.
====================
Link: https://patch.msgid.link/cover.1750065793.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shradha Gupta says:
====================
Allow dyn MSI-X vector allocation of MANA
In this patchset we want to enable the MANA driver to be able to
allocate MSI-X vectors in PCI dynamically.
The first patch exports pci_msix_prepare_desc() in PCI to be able to
correctly prepare descriptors for dynamically added MSI-X vectors.
The second patch adds the support of dynamic vector allocation in
pci-hyperv PCI controller by enabling the MSI_FLAG_PCI_MSIX_ALLOC_DYN
flag and using the pci_msix_prepare_desc() exported in first patch.
The third patch adds a detailed description of the irq_setup(), to
help understand the function design better.
The fourth patch is a preparation patch for mana changes to support
dynamic IRQ allocation. It contains changes in irq_setup() to allow
skipping first sibling CPU sets, in case certain IRQs are already
affinitized to them.
The fifth patch has the changes in MANA driver to be able to allocate
MSI-X vectors dynamically. If the support does not exist it defaults to
older behavior.
* 'shradha_v6.16-rc1' of https://github.com/shradhagupta6/linux:
net: mana: Allocate MSI-X vectors dynamically
net: mana: Allow irq_setup() to skip cpus for affinity
net: mana: explain irq_setup() algorithm
PCI: hv: Allow dynamic MSI-X vector allocation
PCI/MSI: Export pci_msix_prepare_desc() for dynamic MSI-X allocations
====================
Link: https://patch.msgid.link/1749650984-9193-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the MANA driver allocates MSI-X vectors statically based on
MANA_MAX_NUM_QUEUES and num_online_cpus() values and in some cases ends
up allocating more vectors than it needs. This is because, by this time
we do not have a HW channel and do not know how many IRQs should be
allocated.
To avoid this, we allocate 1 MSI-X vector during the creation of HWC and
after getting the value supported by hardware, dynamically add the
remaining MSI-X vectors.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
To collaborate with hardware servicing events, upon receiving the special
EQE notification from the HW channel, remove the devices on this bus.
Then, after a waiting period based on the device specs, rescan the parent
bus to recover the devices.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1749834034-18498-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On 64-bit systems, writing/reading one u64 is faster than two u32s even
when they're are adjacent in a struct. The compilers won't guarantee
they will combine those; I observed both successful and unsuccessful
attempts with both GCC and Clang, and it's not easy to say what it
depends on.
There's a few places in libeth_xdp winning up to several percent from
combined access (both performance and object code size, especially
when unrolling). Add __LIBETH_WORD_ACCESS and use it there on LE.
Drivers are free to optimize HW-specific callbacks under the same
definition.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
XSkFQ refill is pretty generic across the drivers minus FQ descriptor
filling and can easily be unified with one inline callback.
XSk wakeup is usually not, but here, instead of commonly used
"SW interrupts", I picked firing an IPI. In most tests, it showed better
performance; it also provides better control for userspace on which CPU
will handle the xmit, as SW interrupts honor IRQ affinity no matter
which core produces XSk xmit descs (while XDPSQs are associated 1:1
with cores having the same ID).
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add XSk counterparts for preparing XSk &libeth_xdp_buff (adding head and
frags), running the program, and handling the verdict, inc. XDP_PASS.
Shortcuts in comparison with regular Rx: frags and all verdicts except
XDP_REDIRECT are under unlikely() and out of line; no checks for XDP
program presence as it's always true for XSk.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # optimizations
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reuse core sending functions to send XSk xmit frames.
Both metadata and no metadata pools/driver are supported. libeth_xdp
also provides generic XSk metadata ops, currently with the checksum
offload only and for cases when HW doesn't require supplying L3/L4
checksum offsets. Drivers are free to pass their own ops.
&libeth_xdp_tx_bulk is not used here as it would be redundant;
pool->tx_descs are accessed directly.
Fake "libeth_xsktmo" is needed to hide implementation details from the
drivers when they want to use the generic ops: the original struct is
defined in the same file where dev->xsk_tx_metadata_ops gets set to
avoid duplication of slowpath; at the same time; XSk xmit functions
use local "fast" copy to inline XMO callbacks.
Tx descriptor filling loop is unrolled by 8.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # optimizations
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add Xsk counterparts for XDP_TX buffer sending and completion.
The same base structures and functions used from the libeth_xdp core,
with adjustments to that XSk Rx always operates on &xdp_buff_xsk for
both head and frags. And unlike regular Rx, here unlikely() are used
for frags, as the header split gives no benefits for XSk Rx, at
least for now.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
End the XDP section by adding helpers to setup XDP features, flipping
.ndo_xdp_xmit() support at runtime (in case when it's not always on),
and calculating the queue clean/refill threshold.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Defining driver-specific functions to pass to libeth_xdp functions can
induce boilerplates and/or look a bit cryptic with all those layers of
indirection. On the other hand, this indirection is needed to allow
compilers to uninline big functions even when passed to __always_inline
helpers (too much inlining also hurts performance in some cases), plus
to reuse some XDP helpers in XSk code.
Add macros to quickly build them, with the detailed kdoc. They take
names of the actual callbacks for filling a Tx descriptor and other
purely HW-specific things and wrap them appropriately.
LIBETH_XDP_DEFINE_{BEGIN,END}() is needed for GCC 8+ unfortunately to
let the drivers control which functions will be static and which global
without hitting `-Wold-style-declaration`.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Running a prog and handling the verdicts, up to napi_gro_receive()
is also pretty generic code not really differing between vendors
(except for Tx descriptor filling and Rx descriptor parsing).
Define a couple inlines to do that. The inline callbacks a driver
needs to pass is mentioned above: Tx descriptor filling for XDP_TX,
populating skb with the descriptor data for XDP_PASS, finalizing
XDPSQs after the polling loop for XDP_TX (kicking the HW to start
sending).
The populate callback passes only &libeth_xdp_buff assuming buff::desc
pointer is enough, plus you can always get the corresponding Rx queue
structure via container_of(buff::rxq). If not, a driver can extend
the buff with more fields directly on the stack without touching
libeth_xdp definitions.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add convenience helpers to build an &xdp_buff. This means: general
initialization before the NAPI loop, adding head, adding frags etc.
libeth_xdp_process_buff() is the same what everybody have in their
drivers:
dma_sync_for_cpu();
if (!frag) {
add_head();
prefetch();
} else {
add_frag();
}
Note that I don't use net_prefetch(), sticking to the original
prefetch(). In none of my tests prefetching 128 bytes yielded better
perf than 64 bytes. That might differ if the headers are huge enough,
but then additional tunneling etc. overhead takes place, you either
way won't win a lot.
&libeth_xdp_stash is for cases when you exit the polling loop without
finishing building the buff. If that happens, you need to store the
buffer in the queue structure until the next loop and then restore it.
It makes no sense to place a whole full &xdp_buff there. Define a
minimal structure, which would store only the fields essential to
restore it.
I was able to pack it into 16 bytes, which is only 8 bytes bigger
than `struct sk_buff *skb` on x64.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When XDP Tx queues are not interrupt-driven but use lazy cleaning,
i.e. only when there are less than `threshold` free descriptors left,
we also need cleanup timers to avoid &xdp_buff and &xdp_frame stall
for too long, especially with Page Pool (it warns every about inflight
pages every 60 second).
Let's say we sent 256 frames and don't need to send more, but we clean
only when the number of pending items >= 384. In that case, those 256
will stall until 128 more are sent. For this, add simple helpers to
run a timer which will clean the queue regardless, after 1 second of
the last send.
The timer is triggered when finalizing the queue. As long as there is
regular active traffic, the timer doesn't fire.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Unfortunately, it's not always possible to allocate
max(num_rxqs, nr_cpu_ids) even on hi-end NICs.
To mitigate this, add simple locking helpers to libeth_xdp.
As long as XDPSQs are not shared, the whole functionality is gated
behind a static lock. Otherwise, each bulk flush locks the queue for
the time of cleaning and filling the descriptors.
As long as this particular queue is not used by more than 1 CPU,
the impact is minimal (runtime check for boolean twice per 16+
descriptors).
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # static key
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Similarly to libeth_tx_complete(), add libeth_xdp_complete_tx() to
handle XDP_TX and xmit buffers. Both use bulk return under the hood.
Also add out of line libeth_tx_complete_any() which handles both
regular and XDP frames (if libeth_xdp is loaded), for example,
to call on queue destroy, where we don't need inlining but
convenience.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add helpers for implementing .ndo_xdp_xmit().
Same as for XDP_TX, accumulate up to 16 DMA-mapped frames on the stack,
then flush. If DMA mapping is failed for some reason, don't try mapping
further frames, but still flush what was already prepared.
DMA address of a head frame is stored in its headroom, assuming it
has enough of it for an 8 (or 4) byte value.
In addition to @prep and @xmit driver callbacks in XDP_TX, xmit also
needs @finalize to kick the XDPSQ after filling.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Start adding XDP-specific code to libeth, namely handling XDP_TX buffers
(only sending).
The idea is that we accumulate up to 16 buffers on the stack, then,
if either the limit is reached or the polling is finished, flush them
at once with only one XDPSQ cleaning (if needed). The main sending
function will be aware of the sending budget and already have all the
info to send the buffers, so it can't fail.
Drivers need to provide 2 inline callbacks to the main sending function:
for cleaning an XDPSQ and for filling descriptors; the library code
takes care of the rest.
Note that unlike the generic code, multi-buffer support is not wrapped
here with unlikely() to not hurt header split setups.
&libeth_xdp_buff is a simple extension over &xdp_buff which has a direct
pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL
size and 16-byte alignment on x86_64).
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Expand libeth's Page Pool functionality by adding native XDP support.
This means picking the appropriate headroom and DMA direction.
Also, register all the created &page_pools as XDP memory models.
A driver then can call xdp_rxq_info_attach_page_pool() when registering
its RxQ info.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Back when the libeth Rx core was initially written, devmem was a draft
and netmem_ref didn't exist in the mainline. Now that it's here, make
libeth MP-agnostic before introducing any new code or any new library
users.
When it's known that the created PP/FQ is for header buffers, use faster
"unsafe" underscored netmem <--> virt accessors as netmem_is_net_iov()
is always false in that case, but consumes some cycles (bit test +
true branch).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The field is spelled "message_priprity" in the big-endian bit-field
definition. Nothing in-tree currently references the member, so the
typo does not break kernel builds, but it is clearly incorrect.
Signed-off-by: RubenKelevra <rubenkelevra@gmail.com>
Link: https://patch.msgid.link/20250612145012.185321-1-rubenkelevra@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- eir: Fix NULL pointer deference on eir_get_service_data
- eir: Fix possible crashes on eir_create_adv_data
- hci_sync: Fix broadcast/PA when using an existing instance
- ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
- ISO: Fix not using bc_sid as advertisement SID
- MGMT: Fix sparse errors
-----BEGIN PGP SIGNATURE-----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=dulg
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- eir: Fix NULL pointer deference on eir_get_service_data
- eir: Fix possible crashes on eir_create_adv_data
- hci_sync: Fix broadcast/PA when using an existing instance
- ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
- ISO: Fix not using bc_sid as advertisement SID
- MGMT: Fix sparse errors
* tag 'for-net-2025-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix sparse errors
Bluetooth: ISO: Fix not using bc_sid as advertisement SID
Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
Bluetooth: eir: Fix possible crashes on eir_create_adv_data
Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance
Bluetooth: Fix NULL pointer deference on eir_get_service_data
====================
Link: https://patch.msgid.link/20250611204944.1559356-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function is no longer used after the four prior fixes.
Given all prior uses were wrong, it seems better to remove it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Offload path is used for GRO with SW IPsec, and not just for HW
offload. So initialize it anyway.
Fixes: 585b64f5a6 ("xfrm: delay initialization of offload path till its actually requested")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Closes: https://lore.kernel.org/all/aEGW_5HfPqU1rFjl@krikkit
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently bc_sid is being ignore when acting as Broadcast Source role,
so this fix it by passing the bc_sid and then use it when programming
the PA:
< HCI Command: LE Set Exte.. (0x08|0x0036) plen 25
Handle: 0x01
Properties: 0x0000
Min advertising interval: 140.000 msec (0x00e0)
Max advertising interval: 140.000 msec (0x00e0)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
TX power: Host has no preference (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 2M (0x02)
SID: 0x01
Scan request notifications: Disabled (0x00)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmhH/swTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnONCCACa16bTW53gBzmiTxdEgUJ/h+gQuR8G
Fj+yOYIWNZY/YOExa40ldApu3iB9UAB0D+FOly4Wv5zYDct6yNBxqtZjbkTFMaoi
3i+SSrRLNtIxgGs1KgJKVPis8mhCqiBL0aGoJDGyRiye6hotECDyQWvlGM3lMGUr
wdMDQW2xyKOWvm++jXijkUMyKThmI7czlSH8al+JU9KcAO9hiUlGzejdI56KUIMW
TRlg2QSK9CfIzgUP4RQughbF59/8Xbq3LOidu50xMad2wiOJj0IUHB0h6LoAshnS
jFy4Ox4Gw5hcmdaEKazjYEtq3nQeZ6wct7jThw02e4D9h0ac2MCVhphk
=Pt9d
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.17-20250610' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-06-10
The first 4 patches are by Vincent Mailhol and prepare the CAN netlink
interface for the introduction of CAN XL configuration.
Geert Uytterhoeven's patch updates the CAN networking documentation.
The last 2 patched are by Davide Caratti and introduce skb drop
reasons in the receive path of several CAN protocols.
* tag 'linux-can-next-for-6.17-20250610' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: add drop reasons in CAN protocols receive path
can: add drop reasons in the receive path of AF_CAN
documentation: networking: can: Document alloc_candev_mqs()
can: netlink: can_changelink(): rename tdc_mask into fd_tdc_flag_provided
can: bittiming: rename can_tdc_is_enabled() into can_fd_tdc_is_enabled()
can: bittiming: rename CAN_CTRLMODE_TDC_MASK into CAN_CTRLMODE_FD_TDC_MASK
can: netlink: replace tabulation by space in assignment
====================
Link: https://patch.msgid.link/20250610094933.1593081-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.
This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.
Ensure the function pointer does not turn NULL after the check.
Fixes: 8934ce2fd0 ("bpf: sockmap redirect ingress support")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new function, netif_subqueue_sent, which is a wrapper for
netdev_tx_sent_queue.
Drivers that use the subqueue variant macros, netif_subqueue_xxx,
identify queue by index and are not required to obtain
struct netdev_queue explicitly.
Such drivers still need to call netdev_tx_sent_queue which is a
counterpart of netif_subqueue_completed_wake. Allowing drivers to use a
subqueue variant for this purpose improves their code consistency by
always referring to queue by its index.
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Link: https://patch.msgid.link/909a5c92db49cad39f0954d6cb86775e6480ef4c.1749038081.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function was introduced in commit 783da70e83 ("net: add
sock_enable_timestamps"), with one caller in rxrpc.
That only caller was removed in commit 7903d4438b ("rxrpc: Don't use
received skbuff timestamps").
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250609153254.3504909-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for reporting additional hardware counters for drop and
TC using the ethtool -S interface.
These counters include:
- Aggregate Rx/Tx drop counters
- Per-TC Rx/Tx packet counters
- Per-TC Rx/Tx byte counters
- Per-TC Rx/Tx pause frame counters
The counters are exposed using ethtool_ops->get_ethtool_stats and
ethtool_ops->get_strings. This feature/counters are not available
to all versions of hardware.
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20250609100103.GA7102@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Besides the existing pr_warn_once(), use skb drop reasons in case AF_CAN
layer drops non-conformant CAN{,FD,XL} frames, or conformant frames
received by "wrong" devices, so that it's possible to debug (and count)
such events using existing tracepoints:
| # perf record -e skb:kfree_skb -aR -- ./drv/canfdtest -v -g -l 1 vcan0
| # perf script
| [...]
| canfdtest 1123 [000] 3893.271264: skb:kfree_skb: skbaddr=0xffff975703c9f700 rx_sk=(nil) protocol=12 location=can_rcv+0x4b reason: CAN_RX_INVALID_FRAME
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20250604160605.1005704-2-dcaratti@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
- MGMT: Protect mgmt_pending list with its own lock
- hci_core: fix list_for_each_entry_rcu usage
- btintel_pcie: Increase the tx and rx descriptor count
- btintel_pcie: Reduce driver buffer posting to prevent race condition
- btintel_pcie: Fix driver not posting maximum rx buffers
-----BEGIN PGP SIGNATURE-----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=VZN1
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
- MGMT: Protect mgmt_pending list with its own lock
- hci_core: fix list_for_each_entry_rcu usage
- btintel_pcie: Increase the tx and rx descriptor count
- btintel_pcie: Reduce driver buffer posting to prevent race condition
- btintel_pcie: Fix driver not posting maximum rx buffers
* tag 'for-net-2025-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Protect mgmt_pending list with its own lock
Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
Bluetooth: btintel_pcie: Reduce driver buffer posting to prevent race condition
Bluetooth: btintel_pcie: Increase the tx and rx descriptor count
Bluetooth: btintel_pcie: Fix driver not posting maximum rx buffers
Bluetooth: hci_core: fix list_for_each_entry_rcu usage
====================
Link: https://patch.msgid.link/20250605191136.904411-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN
in all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place,
fix GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth: stmmac: prevent div by 0 when clock rate is misconfigured
- eth: ice: fix Tx scheduler handling of XDP and changing queue count
- eth: b53: fix support for the RGMII interface when delays configured
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sRQt
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, wireless, Bluetooth, and Netfilter.
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in
all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place, fix
GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth:
- stmmac: prevent div by 0 when clock rate is misconfigured
- ice: fix Tx scheduler handling of XDP and changing queue count
- eth: fix support for the RGMII interface when delays configured"
* tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
calipso: unlock rcu before returning -EAFNOSUPPORT
seg6: Fix validation of nexthop addresses
net: prevent a NULL deref in rtnl_create_link()
net: annotate data-races around cleanup_net_task
selftests: drv-net: tso: make bkg() wait for socat to quit
selftests: drv-net: tso: fix the GRE device name
selftests: drv-net: add configs for the TSO test
wireguard: device: enable threaded NAPI
netlink: specs: rt-link: decode ip6gre
netlink: specs: rt-link: add missing byte-order properties
net: wwan: mhi_wwan_mbim: use correct mux_id for multiplexing
wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
net: dsa: b53: do not touch DLL_IQQD on bcm53115
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
net: dsa: b53: do not configure bcm63xx's IMP port interface
net: dsa: b53: do not enable RGMII delay on bcm63xx
net: dsa: b53: do not enable EEE on bcm63xx
net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
...
During ILA address translations, the L4 checksums can be handled in
different ways. One of them, adj-transport, consist in parsing the
transport layer and updating any found checksum. This logic relies on
inet_proto_csum_replace_by_diff and produces an incorrect skb->csum when
in state CHECKSUM_COMPLETE.
This bug can be reproduced with a simple ILA to SIR mapping, assuming
packets are received with CHECKSUM_COMPLETE:
$ ip a show dev eth0
14: eth0@if15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 62:ae:35:9e:0f:8d brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 3333:0:0:1::c078/64 scope global
valid_lft forever preferred_lft forever
inet6 fd00:10:244:1::c078/128 scope global nodad
valid_lft forever preferred_lft forever
inet6 fe80::60ae:35ff:fe9e:f8d/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
$ ip ila add loc_match fd00:10:244:1 loc 3333:0:0:1 \
csum-mode adj-transport ident-type luid dev eth0
Then I hit [fd00:10:244:1::c078]:8000 with a server listening only on
[3333:0:0:1::c078]:8000. With the bug, the SYN packet is dropped with
SKB_DROP_REASON_TCP_CSUM after inet_proto_csum_replace_by_diff changed
skb->csum. The translation and drop are visible on pwru [1] traces:
IFACE TUPLE FUNC
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ipv6_rcv
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ip6_rcv_core
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) nf_hook_slow
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) inet_proto_csum_replace_by_diff
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_early_demux
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_route_input
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input_finish
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_protocol_deliver_rcu
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) raw6_local_deliver
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ipv6_raw_deliver
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_rcv
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) __skb_checksum_complete
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skb_reason(SKB_DROP_REASON_TCP_CSUM)
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_head_state
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_data
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_free_head
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skbmem
This is happening because inet_proto_csum_replace_by_diff is updating
skb->csum when it shouldn't. The L4 checksum is updated such that it
"cancels" the IPv6 address change in terms of checksum computation, so
the impact on skb->csum is null.
Note this would be different for an IPv4 packet since three fields
would be updated: the IPv4 address, the IP checksum, and the L4
checksum. Two would cancel each other and skb->csum would still need
to be updated to take the L4 checksum change into account.
This patch fixes it by passing an ipv6 flag to
inet_proto_csum_replace_by_diff, to skip the skb->csum update if we're
in the IPv6 case. Note the behavior of the only other user of
inet_proto_csum_replace_by_diff, the BPF subsystem, is left as is in
this patch and fixed in the subsequent patch.
With the fix, using the reproduction from above, I can confirm
skb->csum is not touched by inet_proto_csum_replace_by_diff and the TCP
SYN proceeds to the application after the ILA translation.
Link: https://github.com/cilium/pwru [1]
Fixes: 65d7ab8de5 ("net: Identifier Locator Addressing module")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/b5539869e3550d46068504feb02d37653d939c0b.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Usual collection of driver fixes:
- Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw
- Further ODP functionality in rxe
- Remote access MRs in mana, along with more page sizes
- Improve CM scalability with a rwlock around the agent
- More trace points for hns
- ODP hmm conversion to the new two step dma API
- Support the ethernet HW device in mana as well as the RNIC
- Cleanups:
* Use secs_to_jiffies() when appropriate
* Use ERR_CAST() instead of naked casts
* Don't use %pK in printk
* Unusued functions removed
* Allocation type matching
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaDm95gAKCRCFwuHvBreF
YXJxAQCZ+p+mxt0rTeVI2j6YQ26thuvb/tH0Upu8epgdQ3T/ZgD/YOHBC6OrXWJa
Uz6BTiyz/xiyMtJLTD4kEiG2o74J1gE=
=DNQC
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual collection of driver fixes:
- Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw
- Further ODP functionality in rxe
- Remote access MRs in mana, along with more page sizes
- Improve CM scalability with a rwlock around the agent
- More trace points for hns
- ODP hmm conversion to the new two step dma API
- Support the ethernet HW device in mana as well as the RNIC
- Cleanups:
- Use secs_to_jiffies() when appropriate
- Use ERR_CAST() instead of naked casts
- Don't use %pK in printk
- Unusued functions removed
- Allocation type matching"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (57 commits)
RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work
RDMA/bnxt_re: Support extended stats for Thor2 VF
RDMA/hns: Fix endian issue in trace events
RDMA/mlx5: Avoid flexible array warning
IB/cm: Remove dead code and adjust naming
RDMA/core: Avoid hmm_dma_map_alloc() for virtual DMA devices
RDMA/rxe: Break endless pagefault loop for RO pages
RDMA/bnxt_re: Fix return code of bnxt_re_configure_cc
RDMA/bnxt_re: Fix missing error handling for tx_queue
RDMA/bnxt_re: Fix incorrect display of inactivity_cp in debugfs output
RDMA/mlx5: Add support for 200Gbps per lane speeds
RDMA/mlx5: Remove the redundant MLX5_IB_STAGE_UAR stage
RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction
net: mana: Add support for auxiliary device servicing events
RDMA/mana_ib: unify mana_ib functions to support any gdma device
RDMA/mana_ib: Add support of mana_ib for RNIC and ETH nic
net: mana: Probe rdma device in mana driver
RDMA/siw: replace redundant ternary operator with just rv
RDMA/umem: Separate implicit ODP initialization from explicit ODP
RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage
...
To support Multi Vports on Bare metal, increase the device config response
version. And, skip the register HW vport, and register filter steps, when
the Bare metal hostmode is set.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1747671636-5810-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sctp_do_peeloff is only used inside of net/sctp/socket.c,
so mark it static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250526054745.2329201-1-hch@lst.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lingering should be transport-independent in the long run. In preparation
for supporting other transports, as well as the linger on shutdown(), move
code to core.
Generalize by querying vsock_transport::unsent_bytes(), guard against the
callback being unimplemented. Do not pass sk_lingertime explicitly. Pull
SOCK_LINGER check into vsock_linger().
Flatten the function. Remove the nested block by inverting the condition:
return early on !timeout.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-2-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgzoyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0cEIAJrO2lKaFN4fbv6G
FQTHQF1soicGpak3yY9u1o5LCqEIzjW2ScxcKG+dl7FcXsaZYcyg4HNzxbV9l/rr
Ck2qZh3CCkVem0/nEsOJwYbNYKnq+pM5h1jIwn/LUkRuV55s5K5oRHzRj673BEj5
BLaRFivZ1t4eM64EqbU1ut11/VEAkr2GcB01forHDeuWwoa3p6DfmALo7X/U43Vg
FN2hp/3PPfiU6PwoCxQlmMpHNFkoZOHpi8P8Qm+mu0MQI12QrUC1Riib4EkrwEEv
a28F4Au+TIjLceRdi6Ss/rhTC71usQIQ2OnnmHBUeYgdwHRXHgfewhtQDUKTU0MR
OwKECbY=
=skuS
-----END PGP SIGNATURE-----
Merge tag 'v6.15' into rdma.git for-next
Following patches need the RDMA rc branch since we are past the RC cycle
now.
Merge conflicts resolved based on Linux-next:
- For RXE odp changes keep for-next version and fixup new places that
need to call is_odp_mr()
https://lore.kernel.org/r/20250422143019.500201bd@canb.auug.org.auhttps://lore.kernel.org/r/20250514122455.3593b083@canb.auug.org.au
- irdma is keeping the while/kfree bugfix from -rc and the pf/cdev_info
change from for-next
https://lore.kernel.org/r/20250513130630.280ee6c5@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----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=fBhd
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next,
specifically 26 patches: 5 patches adding/updating selftests,
4 fixes, 3 PREEMPT_RT fixes, and 14 patches to enhance nf_tables):
1) Improve selftest coverage for pipapo 4 bit group format, from
Florian Westphal.
2) Fix incorrect dependencies when compiling a kernel without
legacy ip{6}tables support, also from Florian.
3) Two patches to fix nft_fib vrf issues, including selftest updates
to improve coverage, also from Florian Westphal.
4) Fix incorrect nesting in nft_tunnel's GENEVE support, from
Fernando F. Mancera.
5) Three patches to fix PREEMPT_RT issues with nf_dup infrastructure
and nft_inner to match in inner headers, from Sebastian Andrzej Siewior.
6) Integrate conntrack information into nft trace infrastructure,
from Florian Westphal.
7) A series of 13 patches to allow to specify wildcard netdevice in
netdev basechain and flowtables, eg.
table netdev filter {
chain ingress {
type filter hook ingress devices = { eth0, eth1, vlan* } priority 0; policy accept;
}
}
This also allows for runtime hook registration on NETDEV_{UN}REGISTER
event, from Phil Sutter.
netfilter pull request 25-05-23
* tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: (26 commits)
selftests: netfilter: Torture nftables netdev hooks
netfilter: nf_tables: Add notifications for hook changes
netfilter: nf_tables: Support wildcard netdev hook specs
netfilter: nf_tables: Sort labels in nft_netdev_hook_alloc()
netfilter: nf_tables: Handle NETDEV_CHANGENAME events
netfilter: nf_tables: Wrap netdev notifiers
netfilter: nf_tables: Respect NETDEV_REGISTER events
netfilter: nf_tables: Prepare for handling NETDEV_REGISTER events
netfilter: nf_tables: Have a list of nf_hook_ops in nft_hook
netfilter: nf_tables: Pass nf_hook_ops to nft_unregister_flowtable_hook()
netfilter: nf_tables: Introduce nft_register_flowtable_ops()
netfilter: nf_tables: Introduce nft_hook_find_ops{,_rcu}()
netfilter: nf_tables: Introduce functions freeing nft_hook objects
netfilter: nf_tables: add packets conntrack state to debug trace info
netfilter: conntrack: make nf_conntrack_id callable without a module dependency
netfilter: nf_dup_netdev: Move the recursion counter struct netdev_xmit
netfilter: nft_inner: Use nested-BH locking for nft_pcpu_tun_ctx
netfilter: nf_dup{4, 6}: Move duplication check to task_struct
netfilter: nft_tunnel: fix geneve_opt dump
selftests: netfilter: nft_fib.sh: add type and oif tests with and without VRFs
...
====================
Link: https://patch.msgid.link/20250523132712.458507-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GRVJ
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2025-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
1) Remove some unnecessary strscpy_pad() size arguments.
From Thorsten Blum.
2) Correct use of xso.real_dev on bonding offloads.
Patchset from Cosmin Ratiu.
3) Add hardware offload configuration to XFRM_MSG_MIGRATE.
From Chiachang Wang.
4) Refactor migration setup during cloning. This was
done after the clone was created. Now it is done
in the cloning function itself.
From Chiachang Wang.
5) Validate assignment of maximal possible SEQ number.
Prevent from setting to the maximum sequrnce number
as this would cause for traffic drop.
From Leon Romanovsky.
6) Prevent configuration of interface index when offload
is used. Hardware can't handle this case.i
From Leon Romanovsky.
7) Always use kfree_sensitive() for SA secret zeroization.
From Zilin Guan.
ipsec-next-2025-05-23
* tag 'ipsec-next-2025-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: use kfree_sensitive() for SA secret zeroization
xfrm: prevent configuration of interface index when offload is used
xfrm: validate assignment of maximal possible SEQ number
xfrm: Refactor migration setup during the cloning process
xfrm: Migrate offload configuration
bonding: Fix multiple long standing offload races
bonding: Mark active offloaded xfrm_states
xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free}
xfrm: Remove unneeded device check from validate_xmit_xfrm
xfrm: Use xdo.dev instead of xdo.real_dev
net/mlx5: Avoid using xso.real_dev unnecessarily
xfrm: Remove unnecessary strscpy_pad() size arguments
====================
Link: https://patch.msgid.link/20250523075611.3723340-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace kfree_skb() used in neigh_resolve_output() and
neigh_connected_output() with kfree_skb_reason().
Following new skb drop reason is added:
/* failed to fill the device hard header */
SKB_DROP_REASON_NEIGH_HH_FILLFAIL
Signed-off-by: Qiu Yutan <qiu.yutan@zte.com.cn>
Signed-off-by: Jiang Kun <jiang.kun2@zte.com.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Xu Xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Notify user space if netdev hooks are updated due to netdev add/remove
events. Send minimal notification messages by introducing
NFT_MSG_NEWDEV/DELDEV message types describing a single device only.
Upon NETDEV_CHANGENAME, the callback has no information about the
interface's old name. To provide a clear message to user space, include
the hook's stored interface name in the notification.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Supporting a 1:n relationship between nft_hook and nf_hook_ops is
convenient since a chain's or flowtable's nft_hooks may remain in place
despite matching interfaces disappearing. This stabilizes ruleset dumps
in that regard and opens the possibility to claim newly added interfaces
which match the spec. Also it prepares for wildcard interface specs
since these will potentially match multiple interfaces.
All spots dealing with hook registration are updated to handle a list of
multiple nf_hook_ops, but nft_netdev_hook_alloc() only adds a single
item for now to retain the old behaviour. The only expected functional
change here is how vanishing interfaces are handled: Instead of dropping
the respective nft_hook, only the matching nf_hook_ops are dropped.
To safely remove individual ops from the list in netdev handlers, an
rcu_head is added to struct nf_hook_ops so kfree_rcu() may be used.
There is at least nft_flowtable_find_dev() which may be iterating
through the list at the same time.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Also a pretty dull wrapper around the hook->ops.dev comparison for now.
Will search the embedded nf_hook_ops list in future. The ugly cast to
eliminate the const qualifier will vanish then, too.
Since this future list will be RCU-protected, also introduce an _rcu()
variant here.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
fib has two modes:
1. Obtain output device according to source or destination address
2. Obtain the type of the address, e.g. local, unicast, multicast.
'fib daddr type' should return 'local' if the address is configured
in this netns or unicast otherwise.
'fib daddr . iif type' should return 'local' if the address is configured
on the input interface or unicast otherwise, i.e. more restrictive.
However, if the interface is part of a VRF, then 'fib daddr type'
returns unicast even if the address is configured on the incoming
interface.
This is broken for both ipv4 and ipv6.
In the ipv4 case, inet_dev_addr_type must only be used if the
'iif' or 'oif' (strict mode) was requested.
Else inet_addr_type_dev_table() needs to be used and the correct
dev argument must be passed as well so the correct fib (vrf) table
is used.
In the ipv6 case, the bug is similar, without strict mode, dev is NULL
so .flowi6_l3mdev will be set to 0.
Add a new 'nft_fib_l3mdev_master_ifindex_rcu()' helper and use that
to init the .l3mdev structure member.
For ipv6, use it from nft_fib6_flowi_init() which gets called from
both the 'type' and the 'route' mode eval functions.
This provides consistent behaviour for all modes for both ipv4 and ipv6:
If strict matching is requested, the input respectively output device
of the netfilter hooks is used.
Otherwise, use skb->dev to obtain the l3mdev ifindex.
Without this, most type checks in updated nft_fib.sh selftest fail:
FAIL: did not find veth0 . 10.9.9.1 . local in fibtype4
FAIL: did not find veth0 . dead:1::1 . local in fibtype6
FAIL: did not find veth0 . dead:9::1 . local in fibtype6
FAIL: did not find tvrf . 10.0.1.1 . local in fibtype4
FAIL: did not find tvrf . 10.9.9.1 . local in fibtype4
FAIL: did not find tvrf . dead:1::1 . local in fibtype6
FAIL: did not find tvrf . dead:9::1 . local in fibtype6
FAIL: fib expression address types match (iif in vrf)
(fib errounously returns 'unicast' for all of them, even
though all of these addresses are local to the vrf).
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As long as recvmsg() or recvmmsg() is used with cmsg, it is not
possible to avoid receiving file descriptors via SCM_RIGHTS.
This behaviour has occasionally been flagged as problematic, as
it can be (ab)used to trigger DoS during close(), for example, by
passing a FUSE-controlled fd or a hung NFS fd.
For instance, as noted on the uAPI Group page [0], an untrusted peer
could send a file descriptor pointing to a hung NFS mount and then
close it. Once the receiver calls recvmsg() with msg_control, the
descriptor is automatically installed, and then the responsibility
for the final close() now falls on the receiver, which may result
in blocking the process for a long time.
Regarding this, systemd calls cmsg_close_all() [1] after each
recvmsg() to close() unwanted file descriptors sent via SCM_RIGHTS.
However, this cannot work around the issue at all, because the final
fput() may still occur on the receiver's side once sendmsg() with
SCM_RIGHTS succeeds. Also, even filtering by LSM at recvmsg() does
not work for the same reason.
Thus, we need a better way to refuse SCM_RIGHTS at sendmsg().
Let's introduce SO_PASSRIGHTS to disable SCM_RIGHTS.
Note that this option is enabled by default for backward
compatibility.
Link: https://uapi-group.org/kernel-features/#disabling-reception-of-scm_rights-for-af_unix-sockets #[0]
Link: https://github.com/systemd/systemd/blob/v257.5/src/basic/fd-util.c#L612-L628 #[1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As explained in the next patch, SO_PASSRIGHTS would have a problem
if we assigned a corresponding bit to socket->flags, so it must be
managed in struct sock.
Mixing socket->flags and sk->sk_flags for similar options will look
confusing, and sk->sk_flags does not have enough space on 32bit system.
Also, as mentioned in commit 16e5726269 ("af_unix: dont send
SCM_CREDENTIALS by default"), SOCK_PASSCRED and SOCK_PASSPID handling
is known to be slow, and managing the flags in struct socket cannot
avoid that for embryo sockets.
Let's move SOCK_PASS{CRED,PIDFD,SEC} to struct sock.
While at it, other SOCK_XXX flags in net.h are grouped as enum.
Note that assign_bit() was atomic, so the writer side is moved down
after lock_sock() in setsockopt(), but the bit is only read once
in sendmsg() and recvmsg(), so lock_sock() is not needed there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SCM_CREDENTIALS and SCM_SECURITY can be recv()ed by calling
scm_recv() or scm_recv_unix(), and SCM_PIDFD is only used by
scm_recv_unix().
scm_recv() is called from AF_NETLINK and AF_BLUETOOTH.
scm_recv_unix() is literally called from AF_UNIX.
Let's restrict SO_PASSCRED and SO_PASSSEC to such sockets and
SO_PASSPIDFD to AF_UNIX only.
Later, SOCK_PASS{CRED,PIDFD,SEC} will be moved to struct sock
and united with another field.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
scm_recv() has been placed in scm.h since the pre-git era for no
particular reason (I think), which makes the file really fragile.
For example, when you move SOCK_PASSCRED from include/linux/net.h to
enum sock_flags in include/net/sock.h, you will see weird build failure
due to terrible dependency.
To avoid the build failure in the future, let's move scm_recv(_unix())?
and its callees to scm.c.
Note that only scm_recv() needs to be exported for Bluetooth.
scm_send() should be moved to scm.c too, but I'll revisit later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2 ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a2 ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bgyq
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2025-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-05-21
1) Fix some missing kfree_skb in the error paths of espintcp.
From Sabrina Dubroca.
2) Fix a reference leak in espintcp.
From Sabrina Dubroca.
3) Fix UDP GRO handling for ESPINUDP.
From Tobias Brunner.
4) Fix ipcomp truesize computation on the receive path.
From Sabrina Dubroca.
5) Sanitize marks before policy/state insertation.
From Paul Chaignon.
* tag 'ipsec-2025-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Sanitize marks before insert
xfrm: ipcomp: fix truesize computation on receive
xfrm: Fix UDP GRO handling for some corner cases
espintcp: remove encap socket caching to avoid reference leak
espintcp: fix skb leaks
====================
Link: https://patch.msgid.link/20250521054348.4057269-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that the only remaining caller of __skb_checksum() is
skb_checksum(), fold __skb_checksum() into skb_checksum(). This makes
struct skb_checksum_ops unnecessary, so remove that too and simply do
the "regular" net checksum. It also makes the wrapper functions
csum_partial_ext() and csum_block_add_ext() unnecessary, so remove those
too and just use the underlying functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-7-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sctp_compute_cksum() just use the new function skb_crc32c(),
instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C. This is faster and simpler.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-6-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use separate link type id for unicast and broadcast ISO connections.
These connection types are handled with separate HCI commands, socket
API is different, and hci_conn has union fields that are different in
the two cases, so they shall not be mixed up.
Currently in most places it is attempted to distinguish ucast by
bacmp(&c->dst, BDADDR_ANY) but it is wrong as dst is set for bcast sink
hci_conn in iso_conn_ready(). Additionally checking sync_handle might be
OK, but depends on details of bcast conn configuration flow.
To avoid complicating it, use separate link types.
Fixes: f764a6c2c1 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth needs some way for user to get supported so_timestamping flags
for the different socket types.
Use SIOCETHTOOL API for this purpose. As hci_dev is not associated with
struct net_device, the existing implementation can't be reused, so we
add a small one here.
Add support (only) for ETHTOOL_GET_TS_INFO command. The API differs
slightly from netdev in that the result depends also on socket type.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Although commit 75ddcd5ad4 ("Bluetooth: btusb: Configure altsetting
for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out
SCO data through USB Bluetooth chips, it's observed that with the patch
HFP is flaky on most of the existing USB Bluetooth controllers: Intel
chips sometimes send out no packet for Transparent codec; MTK chips may
generate SCO data with a wrong handle for CVSD codec; RTK could split
the data with a wrong packet size for Transparent codec; ... etc.
To address the issue above one needs to reset the altsetting back to
zero when there is no active SCO connection, which is the same as the
BlueZ behavior, and another benefit is the bus doesn't need to reserve
bandwidth when no SCO connection.
This patch adds the infrastructure that allow the user space program to
talk to Bluetooth drivers directly:
- Define the new packet type HCI_DRV_PKT which is specifically used for
communication between the user space program and the Bluetooth drviers
- hci_send_frame intercepts the packets and invokes drivers' HCI Drv
callbacks (so far only defined for btusb)
- 2 kinds of events to user space: Command Status and Command Complete,
the former simply returns the status while the later may contain
additional response data.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Fixes: b16b327edb ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Checking the SOCK_WIFI_STATUS flag bit in sk_flags may give wrong results
since sk_flags are part of a union and the union is used otherwise. Add
sk_requests_wifi_status() which checks if sk is non-NULL, sk is a full
socket (so flags are valid) and checks the flag bit.
Fixes: 76a853f86c ("wifi: free SKBTX_WIFI_STATUS skb tx_flags flag")
Suggested-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250520223430.6875-1-spasswolf@web.de
[edit commit message, fix indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit f130a0cc1b ("inet: fix lwtunnel_valid_encap_type() lock
imbalance") added the rtnl_is_held argument as a temporary fix while
I'm converting nexthop and IPv6 routing table to per-netns RTNL or RCU.
Now all callers of lwtunnel_valid_encap_type() do not hold RTNL.
Let's remove the argument.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_lock is already held when calling bnxt_ulp_irq_stop() and
bnxt_ulp_irq_restart(). When converting rtnl_lock to netdev_lock,
the original code was rtnl_dereference() to indicate that rtnl_lock
was already held. rcu_dereference_protected() is the correct
conversion after replacing rtnl_lock with netdev_lock.
Add a new helper netdev_lock_dereference() similar to
rtnl_dereference().
Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250519204130.3097027-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AFAIU always returning -1 from lockdep's compare function
basically disables checking of dependencies between given
locks. Try to be a little more precise about what guarantees
that instance locks won't deadlock.
Right now we only nest them under protection of rtnl_lock.
Mostly in unregister_netdevice_many() and dev_close_many().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250517200810.466531-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename local variable in macros from txq to _txq.
When macro parameter get_desc is expended it is likely to have a txq
token that refers to a different txq variable at the caller's site.
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/95b60d218f004308486d92ed17c8cc6f28bac09d.1747559621.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFS can exhibit lower performance for workloads using short-lived
flows and a small set of 4-tuple.
This is often the case for load-testers, using a pair of hosts,
if the server has a single listener port.
Typical use case :
Server : tcp_crr -T128 -F1000 -6 -U -l30 -R 14250
Client : tcp_crr -T128 -F1000 -6 -U -l30 -c -H server | grep local_throughput
This is because RFS global hash table contains stale information,
when the same RSS key is recycled for another socket and another cpu.
Make sure to undo the changes and go back to initial state when
a flow is disconnected.
Performance of the above test is increased by 22 %,
going from 372604 transactions per second to 457773.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Octavian Purdila <tavip@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250515100354.3339920-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers need to make sure not to pass netmem dma-addrs to the
dma-mapping API in order to support netmem TX.
Add helpers and netmem_dma_*() helpers that enables special handling of
netmem dma-addrs that drivers can use.
Document in netmem.rst what drivers need to do to support netmem TX.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-7-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Augment dmabuf binding to be able to handle TX. Additional to all the RX
binding, we also create tx_vec needed for the TX path.
Provide API for sendmsg to be able to send dmabufs bound to this device:
- Provide a new dmabuf_tx_cmsg which includes the dmabuf to send from.
- MSG_ZEROCOPY with SCM_DEVMEM_DMABUF cmsg indicates send from dma-buf.
Devmem is uncopyable, so piggyback off the existing MSG_ZEROCOPY
implementation, while disabling instances where MSG_ZEROCOPY falls back
to copying.
We additionally pipe the binding down to the new
zerocopy_fill_skb_from_devmem which fills a TX skb with net_iov netmems
instead of the traditional page netmems.
We also special case skb_frag_dma_map to return the dma-address of these
dmabuf net_iovs instead of attempting to map pages.
The TX path may release the dmabuf in a context where we cannot wait.
This happens when the user unbinds a TX dmabuf while there are still
references to its netmems in the TX path. In that case, the netmems will
be put_netmem'd from a context where we can't unmap the dmabuf, Resolve
this by making __net_devmem_dmabuf_binding_free schedule_work'd.
Based on work by Stanislav Fomichev <sdf@fomichev.me>. A lot of the meat
of the implementation came from devmem TCP RFC v1[1], which included the
TX path, but Stan did all the rebasing on top of netmem/net_iov.
Cc: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-5-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently net_iovs support only pp ref counts, and do not support a
page ref equivalent.
This is fine for the RX path as net_iovs are used exclusively with the
pp and only pp refcounting is needed there. The TX path however does not
use pp ref counts, thus, support for get_page/put_page equivalent is
needed for netmem.
Support get_netmem/put_netmem. Check the type of the netmem before
passing it to page or net_iov specific code to obtain a page ref
equivalent.
For dmabuf net_iovs, we obtain a ref on the underlying binding. This
ensures the entire binding doesn't disappear until all the net_iovs have
been put_netmem'ed. We do not need to track the refcount of individual
dmabuf net_iovs as we don't allocate/free them from a pool similar to
what the buddy allocator does for pages.
This code is written to be extensible by other net_iov implementers.
get_netmem/put_netmem will check the type of the netmem and route it to
the correct helper:
pages -> [get|put]_page()
dmabuf net_iovs -> net_devmem_[get|put]_net_iov()
new net_iovs -> new helpers
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-3-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Later patches in the series adds TX net_iovs where there is no pp
associated, so we can't rely on niov->pp->mp_ops to tell what is the
type of the net_iov.
Add a type enum to the net_iov which tells us the net_iov type.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508004830.4100853-2-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Handle soc servicing events which require the rdma auxiliary device resources to
be cleaned up during a suspend, and re-initialized during a resume.
Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1746633545-17653-5-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Initialize gdma device for rdma inside mana module.
For each gdma device, initialize an auxiliary ib device.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1746633545-17653-2-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
New timestamping API was introduced in commit 66f7223039 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert DSA to the new API, so that the ndo_eth_ioctl() path can
be removed completely.
Move the ds->ops->port_hwtstamp_get() and ds->ops->port_hwtstamp_set()
calls from dsa_user_ioctl() to dsa_user_hwtstamp_get() and
dsa_user_hwtstamp_set().
Due to the fact that the underlying ifreq type changes to
kernel_hwtstamp_config, the drivers and the Ocelot switchdev front-end,
all hooked up directly or indirectly, must also be converted all at once.
The conversion also updates the comment from dsa_port_supports_hwtstamp(),
which is no longer true because kernel_hwtstamp_config is kernel memory
and does not need copy_to_user(). I've deliberated whether it is
necessary to also update "err != -EOPNOTSUPP" to a more general "!err",
but all drivers now either return 0 or -EOPNOTSUPP.
The existing logic from the ocelot_ioctl() function, to avoid
configuring timestamping if the PHY supports the operation, is obsoleted
by more advanced core logic in dev_set_hwtstamp_phylib().
This is only a partial preparation for proper PHY timestamping support.
None of these switch driver currently sets up PTP traps for PHY
timestamping, so setting dev->see_all_hwtstamp_requests is not yet
necessary and the conversion is relatively trivial.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # felix, sja1105, mv88e6xxx
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508095236.887789-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, when reducing a qdisc's limit via the ->change() operation, only
the main skb queue was trimmed, potentially leaving packets in the gso_skb
list. This could result in NULL pointer dereference when we only check
sch->limit against sch->q.qlen.
This patch introduces a new helper, qdisc_dequeue_internal(), which ensures
both the gso_skb list and the main queue are properly flushed when trimming
excess packets. All relevant qdiscs (codel, fq, fq_codel, fq_pie, hhf, pie)
are updated to use this helper in their ->change() routines.
Fixes: 76e3cc126b ("codel: Controlled Delay AQM")
Fixes: 4b549a2ef4 ("fq_codel: Fair Queue Codel AQM")
Fixes: afe4fd0624 ("pkt_sched: fq: Fair Queue packet scheduler")
Fixes: ec97ecf1eb ("net: sched: add Flow Queue PIE packet scheduler")
Fixes: 10239edf86 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Fixes: d4b36210c2 ("net: pkt_sched: PIE AQM scheme")
Reported-by: Will <willsroot@protonmail.com>
Reported-by: Savy <savy@syst3mfailure.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags
- hci_event: Fix not using key encryption size when its known
-----BEGIN PGP SIGNATURE-----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=uyVh
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags
- hci_event: Fix not using key encryption size when its known
* tag 'for-net-2025-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_event: Fix not using key encryption size when its known
Bluetooth: MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags
====================
Link: https://patch.msgid.link/20250508150927.385675-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element
contains MCS15 Disable subfield as the sixth bit, which is set when
MCS15 support is not enabled.
Get MCS15 support from EHT operation params and add it in link_conf
so that driver can use this value to know if EHT-MCS 15 reception
is enabled.
Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com>
Link: https://patch.msgid.link/20250505152836.3266829-1-quic_mkumarg@quicinc.com
[remove pointless !! for bool assignment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This fixes the regression introduced by 50c1241e6a8a ("Bluetooth: l2cap:
Check encryption key size on incoming connection") introduced a check for
l2cap_check_enc_key_size which checks for hcon->enc_key_size which may
not be initialized if HCI_OP_READ_ENC_KEY_SIZE is still pending.
If the key encryption size is known, due previously reading it using
HCI_OP_READ_ENC_KEY_SIZE, then store it as part of link_key/smp_ltk
structures so the next time the encryption is changed their values are
used as conn->enc_key_size thus avoiding the racing against
HCI_OP_READ_ENC_KEY_SIZE.
Now that the enc_size is stored as part of key the information the code
then attempts to check that there is no downgrade of security if
HCI_OP_READ_ENC_KEY_SIZE returns a value smaller than what has been
previously stored.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220061
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220063
Fixes: 522e9ed157 ("Bluetooth: l2cap: Check encryption key size on incoming connection")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Older drivers and drivers with lower queue counts often have a static
array of queues, rather than allocating structs for each queue on demand.
Add a helper for adding up qstats from a queue range. Expectation is
that driver will pass a queue range [netdev->real_num_*x_queues, MAX).
It was tempting to always use num_*x_queues as the end, but virtio
seems to clamp its queue count after allocating the netdev. And this
way we can trivaly reuse the helper for [0, real_..).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250507003221.823267-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
-----BEGIN PGP SIGNATURE-----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=s9mS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless features, notably
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
* tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (177 commits)
Revert "wifi: iwlwifi: clean up config macro"
wifi: iwlwifi: move phy_filters to fw_runtime
wifi: iwlwifi: pcie: make sure to lock rxq->read
wifi: iwlwifi: add definitions for iwl_mac_power_cmd version 2
wifi: iwlwifi: clean up config macro
wifi: iwlwifi: mld: simplify iwl_mld_rx_fill_status()
wifi: iwlwifi: mld: rx: simplify channel handling
wifi: iwlwifi: clean up band in RX metadata
wifi: iwlwifi: mld: skip unknown FW channel load values
wifi: iwlwifi: define API for external FSEQ images
wifi: iwlwifi: mld: allow EMLSR on separated 5 GHz subbands
wifi: iwlwifi: mld: use cfg80211_chandef_get_width()
wifi: iwlwifi: mld: fix iwl_mld_emlsr_disallowed_with_link() return
wifi: iwlwifi: mld: clarify variable type
wifi: iwlwifi: pcie: add support for the reset handshake in MSI
wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled
wifi: mac80211: restructure tx profile retrieval for MLO MBSSID
wifi: nl80211: add link id of transmitted profile for MLO MBSSID
wifi: ieee80211: Add helpers to fetch EMLSR delay and timeout values
wifi: mac80211: update ML STA with EML capabilities
...
====================
Link: https://patch.msgid.link/20250506174656.119970-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Assign DEVLINK_PARAM_TYPE_* enum values to DEVLINK_VAR_ATTR_TYPE_* to
ensure the same values are used internally and in UAPI. Benefit from
that by removing the value translations.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250505114513.53370-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_assoc_del_peer() last use was removed in 2015 by
commit 73e6742027 ("sctp: Do not try to search for the transport twice")
which now uses rm_peer instead of del_peer.
sctp_chunk_iif() last use was removed in 2016 by
commit 1f45f78f8e ("sctp: allow GSO frags to access the chunk too")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250501233815.99832-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The last use of __strp_unpause() was removed in 2022 by
commit 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250501002402.308843-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Load balance new TCP connections across nexthops also when they
connect to the same service at a single remote address and port.
This affects only port-based multipath hashing:
fib_multipath_hash_policy 1 or 3.
Local connections must choose both a source address and port when
connecting to a remote service, in ip_route_connect. This
"chicken-and-egg problem" (commit 2d7192d6cb ("ipv4: Sanitize and
simplify ip_route_{connect,newports}()")) is resolved by first
selecting a source address, by looking up a route using the zero
wildcard source port and address.
As a result multiple connections to the same destination address and
port have no entropy in fib_multipath_hash.
This is not a problem when forwarding, as skb-based hashing has a
4-tuple. Nor when establishing UDP connections, as autobind there
selects a port before reaching ip_route_connect.
Load balance also TCP, by using a random port in fib_multipath_hash.
Port assignment in inet_hash_connect is not atomic with
ip_route_connect. Thus ports are unpredictable, effectively random.
Implementation details:
Do not actually pass a random fl4_sport, as that affects not only
hashing, but routing more broadly, and can match a source port based
policy route, which existing wildcard port 0 will not. Instead,
define a new wildcard flowi flag that is used only for hashing.
Selecting a random source is equivalent to just selecting a random
hash entirely. But for code clarity, follow the normal 4-tuple hash
process and only update this field.
fib_multipath_hash can be reached with zero sport from other code
paths, so explicitly pass this flowi flag, rather than trying to infer
this case in the function itself.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424143549.669426-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With multipath routes, try to ensure that packets leave on the device
that is associated with the source address.
Avoid the following tcpdump example:
veth0 Out IP 10.1.0.2.38640 > 10.2.0.3.8000: Flags [S]
veth1 Out IP 10.1.0.2.38648 > 10.2.0.3.8000: Flags [S]
Which can happen easily with the most straightforward setup:
ip addr add 10.0.0.1/24 dev veth0
ip addr add 10.1.0.1/24 dev veth1
ip route add 10.2.0.3 nexthop via 10.0.0.2 dev veth0 \
nexthop via 10.1.0.2 dev veth1
This is apparently considered WAI, based on the comment in
ip_route_output_key_hash_rcu:
* 2. Moreover, we are allowed to send packets with saddr
* of another iface. --ANK
It may be ok for some uses of multipath, but not all. For instance,
when using two ISPs, a router may drop packets with unknown source.
The behavior occurs because tcp_v4_connect makes three route
lookups when establishing a connection:
1. ip_route_connect calls to select a source address, with saddr zero.
2. ip_route_connect calls again now that saddr and daddr are known.
3. ip_route_newports calls again after a source port is also chosen.
With a route with multiple nexthops, each lookup may make a different
choice depending on available entropy to fib_select_multipath. So it
is possible for 1 to select the saddr from the first entry, but 3 to
select the second entry. Leading to the above situation.
Address this by preferring a match that matches the flowi4 saddr. This
will make 2 and 3 make the same choice as 1. Continue to update the
backup choice until a choice that matches saddr is found.
Do this in fib_select_multipath itself, rather than passing an fl4_oif
constraint, to avoid changing non-multipath route selection. Commit
e6b45241c5 ("ipv4: reset flowi parameters on route connect") shows
how that may cause regressions.
Also read ipv4.sysctl_fib_multipath_use_neigh only once. No need to
refresh in the loop.
This does not happen in IPv6, which performs only one lookup.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424143549.669426-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The "noqueue" qdisc can either be directly attached, or get default
attached if net_device priv_flags has IFF_NO_QUEUE. In both cases, the
allocated Qdisc structure gets it's enqueue function pointer reset to
NULL by noqueue_init() via noqueue_qdisc_ops.
This is a common case for software virtual net_devices. For these devices
with no-queue, the transmission path in __dev_queue_xmit() will bypass
the qdisc layer. Directly invoking device drivers ndo_start_xmit (via
dev_hard_start_xmit). In this mode the device driver is not allowed to
ask for packets to be queued (either via returning NETDEV_TX_BUSY or
stopping the TXQ).
The simplest and most reliable way to identify this no-queue case is by
checking if enqueue == NULL.
The vrf driver currently open-codes this check (!qdisc->enqueue). While
functionally correct, this low-level detail is better encapsulated in a
dedicated helper for clarity and long-term maintainability.
To make this behavior more explicit and reusable, this patch introduce a
new helper: qdisc_txq_has_no_queue(). Helper will also be used by the
veth driver in the next patch, which introduces optional qdisc-based
backpressure.
This is a non-functional change.
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/174559293172.827981.7583862632045264175.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BIG Create Sync requires the command to just generates a status so this
makes use of __hci_cmd_sync_status_sk to wait for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the BIG sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED before proceeding to next connection.
Fixes: 42ecf19471 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Broadcast Receiver requires creating PA sync but the command just
generates a status so this makes use of __hci_cmd_sync_status_sk to wait
for HCI_EV_LE_PA_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the PA sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EV_LE_PA_SYNC_ESTABLISHED before proceeding to next connection.
Fixes: 4a5e0ba686 ("Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bring back previous offset calculation behaviour
in AF_XDP unaligned umem mode.
In unaligned mode, upper 16 bits should contain
data offset, lower 48 bits should contain
only specific chunk location without offset.
Remove pool->headroom duplication into 48bit address.
Signed-off-by: Eryk Kubanski <e.kubanski@partner.samsung.com>
Fixes: bea14124ba ("xsk: Get rid of xdp_buff_xsk::orig_addr")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://patch.msgid.link/20250416112925.7501-1-e.kubanski@partner.samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move rx_lock from xsk_socket to xsk_buff_pool.
Fix synchronization for shared umem mode in
generic RX path where multiple sockets share
single xsk_buff_pool.
RX queue is exclusive to xsk_socket, while FILL
queue can be shared between multiple sockets.
This could result in race condition where two
CPU cores access RX path of two different sockets
sharing the same umem.
Protect both queues by acquiring spinlock in shared
xsk_buff_pool.
Lock contention may be minimized in the future by some
per-thread FQ buffering.
It's safe and necessary to move spin_lock_bh(rx_lock)
after xsk_rcv_check():
* xs->pool and spinlock_init is synchronized by
xsk_bind() -> xsk_is_bound() memory barriers.
* xsk_rcv_check() may return true at the moment
of xsk_release() or xsk_unbind_dev(),
however this will not cause any data races or
race conditions. xsk_unbind_dev() removes xdp
socket from all maps and waits for completion
of all outstanding rx operations. Packets in
RX path will either complete safely or drop.
Signed-off-by: Eryk Kubanski <e.kubanski@partner.samsung.com>
Fixes: bf0bdd1343 ("xdp: fix race on generic receive path")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://patch.msgid.link/20250416101908.10919-1-e.kubanski@partner.samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove three functions that are no longer used.
rxrpc_get_txbuf() last use was removed by 2020's
commit 5e6ef4f101 ("rxrpc: Make the I/O thread take over the call and
local processor work")
rxrpc_kernel_get_epoch() last use was removed by 2020's
commit 44746355cc ("afs: Don't get epoch from a server because it may be
ambiguous")
rxrpc_kernel_set_max_life() last use was removed by 2023's
commit db099c625b ("rxrpc: Fix timeout of a call that hasn't yet been
granted a channel")
Both of the rxrpc_kernel_* functions were documented. Remove that
documentation as well as the code.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20250422235147.146460-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT.
Then, we may be going to add a route tied to a dying nexthop.
The nexthop itself is not freed during the RCU grace period, but
if we link a route after __remove_nexthop_fib() is called for the
nexthop, the route will be leaked.
To avoid the race between IPv6 route addition under RCU vs nexthop
deletion under RTNL, let's add a dead flag and protect it and
nh->f6i_list with a spinlock.
__remove_nexthop_fib() acquires the nexthop's spinlock and sets false
to nh->dead, then calls ip6_del_rt() for the linked route one by one
without the spinlock because fib6_purge_rt() acquires it later.
While adding an IPv6 route, fib6_add() acquires the nexthop lock and
checks the dead flag just before inserting the route.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-15-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The next patch adds per-nexthop spinlock which protects nh->f6i_list.
When rt->nh is not NULL, fib6_add_rt2node() will be called under the lock.
fib6_add_rt2node() could call fib6_purge_rt() for another route, which
could holds another nexthop lock.
Then, deadlock could happen between two nexthops.
Let's defer fib6_purge_rt() after fib6_add_rt2node().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-14-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT.
If the request specifies a new table ID, fib6_new_table() is
called to create a new routing table.
Two concurrent requests could specify the same table ID, so we
need a lock to protect net->ipv6.fib_table_hash[h].
Let's add a spinlock to protect the hash bucket linkage.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-13-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For MBSSID, each vif (struct ieee80211_vif) stores another vif
pointer for the transmitting profile of MBSSID set. This won't
suffice for MLO as there may be multiple links, each of which can
be part of different MBSSID sets. Hence the information needs to
be stored per-link. Additionally, the transmitted profile itself
may be part of an MLD hence storing vif will not suffice either.
Fix MLO by storing an instance of struct ieee80211_bss_conf
for each link.
Modify following operations to reflect the above structure updates:
- channel switch completion
- BSS color change completion
- Removing nontransmitted links in ieee80211_stop_mbssid()
- drivers retrieving the transmitted link for beacon templates.
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408184501.3715887-3-aloka.dixit@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During non-transmitted (nontx) profile configuration, interface
index of the transmitted (tx) profile is used to retrieve the
wireless device (wdev) associated with it. With MLO, this 'wdev'
may be part of an MLD with more than one link, hence only
interface index is not sufficient anymore to retrieve the correct
tx profile. Add a new attribute to configure link id of tx profile.
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408184501.3715887-2-aloka.dixit@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an AP and Non-AP MLD operates in EMLSR mode, EML capabilities
advertised during Association contains information such as EMLSR
transition delay, padding delay and transition timeout values.
Save the EML capabilities information that is received during station
addition and capabilities update in ieee80211_sta so that drivers can use
it for triggering EMLSR operation.
Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20250327051320.3253783-3-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Enhanced multi-link single-radio (EMLSR) operation allows a non-AP MLD
with multiple receive chains to listen on one or more EMLSR links when the
corresponding non-AP STA(s) affiliated with the non-AP MLD is (are) in
the awake state. [IEEE 802.11be-2024, (35.3.17 Enhanced multi-link
single-radio (EMLSR) operation)]
An MLD which intends to enable EMLSR operations will set the EML
Capabilities Present subfield to 1 and shall set the EMLSR Support
subfield in the Common Info field of the Basic Multi-Link element to 1 in
all Management frames that include the Basic Multi-Link element except
Authentication frames. EML capabilities contains information such as
EML Transition timeout, Padding delay and Transition delay. These fields
needs to updated to drivers to trigger EMLSR operation and to transmit and
receive initial control frame and data frames.
Add support to receive EML Capabilities subfield that non-AP MLD
advertises during (re)association request and send it to underlying
drivers during ADD/SET station.
Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20250327051320.3253783-2-quic_ramess@quicinc.com
[accept EMLSR capabilities only for unassoc AP STA]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 484a54c2e5. The CoDel
parameter change essentially disables CoDel on slow stations, with some
questionable assumptions, as Dave pointed out in [0]. Quoting from
there:
But here are my pithy comments as to why this part of mac80211 is so
wrong...
static void sta_update_codel_params(struct sta_info *sta, u32 thr)
{
- if (thr && thr < STA_SLOW_THRESHOLD * sta->local->num_sta) {
1) sta->local->num_sta is the number of associated, rather than
active, stations. "Active" stations in the last 50ms or so, might have
been a better thing to use, but as most people have far more than that
associated, we end up with really lousy codel parameters, all the
time. Mistake numero uno!
2) The STA_SLOW_THRESHOLD was completely arbitrary in 2016.
- sta->cparams.target = MS2TIME(50);
This, by itself, was probably not too bad. 30ms might have been
better, at the time, when we were battling powersave etc, but 20ms was
enough, really, to cover most scenarios, even where we had low rate
2Ghz multicast to cope with. Even then, codel has a hard time finding
any sane drop rate at all, with a target this high.
- sta->cparams.interval = MS2TIME(300);
But this was horrible, a total mistake, that is leading to codel being
completely ineffective in almost any scenario on clients or APS.
100ms, even 80ms, here, would be vastly better than this insanity. I'm
seeing 5+seconds of delay accumulated in a bunch of otherwise happily
fq-ing APs....
100ms of observed jitter during a flow is enough. Certainly (in 2016)
there were interactions with powersave that I did not understand, and
still don't, but if you are transmitting in the first place, powersave
shouldn't be a problemmmm.....
- sta->cparams.ecn = false;
At the time we were pretty nervous about ecn, I'm kind of sanguine
about it now, and reliably indicating ecn seems better than turning it
off for any reason.
[...]
In production, on p2p wireless, I've had 8ms and 80ms for target and
interval for years now, and it works great.
I think Dave's arguments above are basically sound on the face of it,
and various experimentation with tighter CoDel parameters in the OpenWrt
community have show promising results[1]. So I don't think there's any
reason to keep this parameter fiddling; hence this revert.
[0] https://lore.kernel.org/linux-wireless/CAA93jw6NJ2cmLmMauz0xAgC2MGbBq6n0ZiZzAdkK0u4b+O2yXg@mail.gmail.com/
[1] https://forum.openwrt.org/t/reducing-multiplexing-latencies-still-further-in-wifi/133605/130
Suggested-By: Dave Taht <dave.taht@gmail.com>
In-memory-of: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250403183930.197716-1-toke@toke.dk
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jason mentioned at netdevconf that we've run out of tx_flags in
the skb_shinfo(). Gain one bit back by removing the wifi bit.
We can do that because the only userspace application for it
(hostapd) doesn't change the setting on the socket, it just
uses different sockets, and normally doesn't even use this any
more, sending the frames over nl80211 instead.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250313134942.52ff54a140ec.If390bbdc46904cf451256ba989d7a056c457af6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 03df156dd3 ("xdp: double protect netdev->xdp_flags with
netdev->lock") introduces the netdev lock to xdp_set_features_flag().
The change includes a _locked version of the method, as it is possible
for a driver to have already acquired the netdev lock before calling
this helper. However, the same applies to
xdp_features_(set|clear)_redirect_flags(), which ends up calling the
unlocked version of xdp_set_features_flags() leading to deadlocks in
GVE, which grabs the netdev lock as part of its suspend, reset, and
shutdown processes:
[ 833.265543] WARNING: possible recursive locking detected
[ 833.270949] 6.15.0-rc1 #6 Tainted: G E
[ 833.276271] --------------------------------------------
[ 833.281681] systemd-shutdow/1 is trying to acquire lock:
[ 833.287090] ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: xdp_set_features_flag+0x29/0x90
[ 833.295470]
[ 833.295470] but task is already holding lock:
[ 833.301400] ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: gve_shutdown+0x44/0x90 [gve]
[ 833.309508]
[ 833.309508] other info that might help us debug this:
[ 833.316130] Possible unsafe locking scenario:
[ 833.316130]
[ 833.322142] CPU0
[ 833.324681] ----
[ 833.327220] lock(&dev->lock);
[ 833.330455] lock(&dev->lock);
[ 833.333689]
[ 833.333689] *** DEADLOCK ***
[ 833.333689]
[ 833.339701] May be due to missing lock nesting notation
[ 833.339701]
[ 833.346582] 5 locks held by systemd-shutdow/1:
[ 833.351205] #0: ffffffffa9c89130 (system_transition_mutex){+.+.}-{4:4}, at: __se_sys_reboot+0xe6/0x210
[ 833.360695] #1: ffff93b399e5c1b8 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xb4/0x1f0
[ 833.369144] #2: ffff949d19a471b8 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xc2/0x1f0
[ 833.377603] #3: ffffffffa9eca050 (rtnl_mutex){+.+.}-{4:4}, at: gve_shutdown+0x33/0x90 [gve]
[ 833.386138] #4: ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: gve_shutdown+0x44/0x90 [gve]
Introduce xdp_features_(set|clear)_redirect_target_locked() versions
which assume that the netdev lock has already been acquired before
setting the XDP feature flag and update GVE to use the locked version.
Fixes: 03df156dd3 ("xdp: double protect netdev->xdp_flags with netdev->lock")
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250422011643.3509287-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
p8022.c defines two external functions, register_8022_client()
and unregister_8022_client(), the last use of which was removed in
2018 by
commit 7a2e838d28 ("staging: ipx: delete it from the tree")
Remove the p8022.c file, it's corresponding header, and glue
surrounding it. There was one place the header was included in vlan.c
but it didn't use the functions it declared.
There was a comment in net/802/Makefile about checking
against net/core/Makefile, but that's at least 20 years old and
there's no sign of net/core/Makefile mentioning it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250418011519.145320-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FDB entries are currently stored in a hash table with a fixed number of
buckets (256), resulting in performance degradation as the number of
entries grows. Solve this by converting the driver to use rhashtable
which maintains more or less constant performance regardless of the
number of entries.
Measured transmitted packets per second using a single pktgen thread
with varying number of entries when the transmitted packet always hits
the default entry (worst case):
Number of entries | Improvement
------------------|------------
1k | +1.12%
4k | +9.22%
16k | +55%
64k | +585%
256k | +2460%
In addition, the change reduces the size of the VXLAN device structure
from 2584 bytes to 672 bytes.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-16-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, FDB entries are stored in a hash table with a fixed number of
buckets. The table is used for both lookups and entry traversal.
Subsequent patches will convert the table to rhashtable which is not
suitable for entry traversal.
In preparation for this conversion, add FDB entries to a linked list.
Subsequent patches will convert the driver to use this list when
traversing entries during dump, flush, etc.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-8-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the VXLAN driver stores FDB entries in a hash table with a
fixed number of buckets (256). Subsequent patches are going to convert
this table to rhashtable with a linked list for entry traversal, as
rhashtable is more scalable.
In preparation for this conversion, move from a per-bucket spin lock to
a single spin lock that protects the entire FDB table.
The per-bucket spin locks were introduced by commit fe1e0713bb
("vxlan: Use FDB_HASH_SIZE hash_locks to reduce contention") citing
"huge contention when inserting/deleting vxlan_fdbs into the fdb_head".
It is not clear from the commit message which code path was holding the
spin lock for long periods of time, but the obvious suspect is the FDB
cleanup routine (vxlan_cleanup()) that periodically traverses the entire
table in order to delete aged-out entries.
This will be solved by subsequent patches that will convert the FDB
cleanup routine to traverse the linked list of FDB entries using RCU,
only acquiring the spin lock when deleting an aged-out entry.
The change reduces the size of the VXLAN device structure from 3600
bytes to 2576 bytes.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-7-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Check PF capability flag whether the 4M, 1G, and 2G pages are
supported. Add these pages sizes to mana_ib, if supported.
Define possible page sizes in enum gdma_page_type and
remove unused enum atb_page_size.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1744621234-26114-4-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add IB_ZERO_BASED to the valid flags and use
the corresponding MR creation request for the zero
based memory.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1744621234-26114-3-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Kuniyuki reports that the assert for netdev lock fires when
there are netdev event listeners (otherwise we skip the netlink
event generation).
Correct the locking when coming from the notifier.
The NETDEV_XDP_FEAT_CHANGE notifier is already fully locked,
it's the documentation that's incorrect.
Fixes: 99e44f39a8 ("netdev: depend on netdev->lock for xdp features")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/20250410171019.62128-1-kuniyu@amazon.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250416030447.1077551-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add hardware offload configuration to XFRM_MSG_MIGRATE
using an option netlink attribute XFRMA_OFFLOAD_DEV.
In the existing xfrm_state_migrate(), the xfrm_init_state()
is called assuming no hardware offload by default. Even the
original xfrm_state is configured with offload, the setting will
be reset. If the device is configured with hardware offload,
it's reasonable to allow the device to maintain its hardware
offload mode. But the device will end up with offload disabled
after receiving a migration event when the device migrates the
connection from one netdev to another one.
The devices that support migration may work with different
underlying networks, such as mobile devices. The hardware setting
should be forwarded to the different netdev based on the
migration configuration. This change provides the capability
for user space to migrate from one netdev to another.
Test: Tested with kernel test in the Android tree located
in https://android.googlesource.com/kernel/tests/
The xfrm_tunnel_test.py under the tests folder in
particular.
Signed-off-by: Chiachang Wang <chiachangwang@google.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently, bnxt_en driver satisfies the requirements of the Device
memory TCP, which is HDS.
So, it implements rx-side Device memory TCP for bnxt_en driver.
It requires only converting the page API to netmem API.
`struct page` of agg rings are changed to `netmem_ref netmem` and
corresponding functions are changed to a variant of netmem API.
It also passes PP_FLAG_ALLOW_UNREADABLE_NETMEM flag to a parameter of
page_pool.
The netmem will be activated only when a user requests devmem TCP.
When netmem is activated, received data is unreadable and netmem is
disabled, received data is readable.
But drivers don't need to handle both cases because netmem core API will
handle it properly.
So, using proper netmem API is enough for drivers.
Device memory TCP can be tested with
tools/testing/selftests/drivers/net/hw/ncdevmem.
This is tested with BCM57504-N425G and firmware version 232.0.155.8/pkg
232.1.132.8.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: David Wei <dw@davidwei.uk>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250415052458.1260575-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the bonding ipsec offload operations to fix a number of
long-standing control plane races between state migration and user
deletion and a few other issues.
xfrm state deletion can happen concurrently with
bond_change_active_slave() operation. This manifests itself as a
bond_ipsec_del_sa() call with x->lock held, followed by a
bond_ipsec_free_sa() a bit later from a wq. The alternate path of
these calls coming from xfrm_dev_state_flush() can't happen, as that
needs the RTNL lock and bond_change_active_slave() already holds it.
1. bond_ipsec_del_sa_all() might call xdo_dev_state_delete() a second
time on an xfrm state that was concurrently killed. This is bad.
2. bond_ipsec_add_sa_all() can add a state on the new device, but
pending bond_ipsec_free_sa() calls from the old device will then hit
the WARN_ON() and then, worse, call xdo_dev_state_free() on the new
device without a corresponding xdo_dev_state_delete().
3. Resolve a sleeping in atomic context introduced by the mentioned
"Fixes" commit.
bond_ipsec_del_sa_all() and bond_ipsec_add_sa_all() now acquire x->lock
and check for x->km.state to help with problems 1 and 2. And since
xso.real_dev is now a private pointer managed by the bonding driver in
xfrm state, make better use of it to fully fix problems 1 and 2. In
bond_ipsec_del_sa_all(), set xso.real_dev to NULL while holding both the
mutex and x->lock, which makes sure that neither bond_ipsec_del_sa() nor
bond_ipsec_free_sa() could run concurrently.
Fix problem 3 by moving the list cleanup (which requires the mutex) from
bond_ipsec_del_sa() (called from atomic context) to bond_ipsec_free_sa()
Finally, simplify bond_ipsec_del_sa() and bond_ipsec_free_sa() by using
xso->real_dev directly, since it's now protected by locks and can be
trusted to always reflect the offload device.
Fixes: 2aeeef906d ("bonding: change ipsec_lock from spin lock to mutex")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Previously, device driver IPSec offload implementations would fall into
two categories:
1. Those that used xso.dev to determine the offload device.
2. Those that used xso.real_dev to determine the offload device.
The first category didn't work with bonding while the second did.
In a non-bonding setup the two pointers are the same.
This commit adds explicit pointers for the offload netdevice to
.xdo_dev_state_add() / .xdo_dev_state_delete() / .xdo_dev_state_free()
which eliminates the confusion and allows drivers from the first
category to work with bonding.
xso.real_dev now becomes a private pointer managed by the bonding
driver.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Before commit 40867d74c3 ("net: Add l3mdev index to flow struct and
avoid oif reset for port devices") it was possible to use FIB rules to
match on a L3 domain. This was done by having a FIB rule match on iif /
oif being a L3 master device. It worked because prior to the FIB rule
lookup the iif / oif fields in the flow structure were reset to the
index of the L3 master device to which the input / output device was
enslaved to.
The above scheme made it impossible to match on the original input /
output device. Therefore, cited commit stopped overwriting the iif / oif
fields in the flow structure and instead stored the index of the
enslaving L3 master device in a new field ('flowi_l3mdev') in the flow
structure.
While the change enabled new use cases, it broke the original use case
of matching on a L3 domain. Fix this by interpreting the iif / oif
matching on a L3 master device as a match against the L3 domain. In
other words, if the iif / oif in the FIB rule points to a L3 master
device, compare the provided index against 'flowi_l3mdev' rather than
'flowi_{i,o}if'.
Before cited commit, a FIB rule that matched on 'iif vrf1' would only
match incoming traffic from devices enslaved to 'vrf1'. With the
proposed change (i.e., comparing against 'flowi_l3mdev'), the rule would
also match traffic originating from a socket bound to 'vrf1'. Avoid that
by adding a new flow flag ('FLOWI_FLAG_L3MDEV_OIF') that indicates if
the L3 domain was derived from the output interface or the input
interface (when not set) and take this flag into account when evaluating
the FIB rule against the flow structure.
Avoid unnecessary checks in the data path by detecting that a rule
matches on a L3 master device when the rule is installed and marking it
as such.
Tested using the following script [1].
Output before 40867d74c3 (v5.4.291):
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
Output after 40867d74c374:
default dev dummy1 table 300 scope link
default dev dummy1 table 300 scope link
Output with this patch:
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
[1]
#!/bin/bash
ip link add name vrf1 up type vrf table 10
ip link add name dummy1 up master vrf1 type dummy
sysctl -wq net.ipv4.conf.all.forwarding=1
sysctl -wq net.ipv4.conf.all.rp_filter=0
ip route add table 100 default dev dummy1
ip route add table 200 default dev dummy1
ip route add table 300 default dev dummy1
ip rule add prio 0 oif vrf1 table 100
ip rule add prio 1 iif vrf1 table 200
ip rule add prio 2 table 300
ip route get 192.0.2.1 oif dummy1 fibmatch
ip route get 192.0.2.1 iif dummy1 from 198.51.100.1 fibmatch
Fixes: 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: hanhuihui <hanhuihui5@huawei.com>
Closes: https://lore.kernel.org/netdev/ec671c4f821a4d63904d0da15d604b75@huawei.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250414172022.242991-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new helper function, nlmsg_payload(), to simplify checking and
retrieving Netlink message payloads.
This reduces boilerplate code for users who need to verify the message
length before accessing its data.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-1-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a follow-up of commit b68b106b0f ("mptcp: sched: reduce size
for unused data"), now removing the mptcp_sched_data structure.
Now is a good time to do that, because the previously mentioned WIP work
has been updated, no longer depending on this structure.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-1-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow the app to request that CHALLENGEs be passed to it through an
out-of-band queue that allows recvmsg() to pick it up so that the app can
add data to it with sendmsg().
This will allow the application (AFS or userspace) to interact with the
process if it wants to and put values into user-defined fields. This will
be used by AFS when talking to a fileserver to supply that fileserver with
a crypto key by which callback RPCs can be encrypted (ie. notifications
from the fileserver to the client).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A number of functions separately furnish an AF_RXRPC socket with callback
function pointers into a kernel app (such as the AFS filesystem) that is
using it. Replace most of these with an ops table for the entire socket.
This makes it easier to add more callback functions.
Note that the call incoming data processing callback is retaind as that
gets set to different things, depending on the type of op.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are no ->exit_batch_rtnl() users remaining.
Let's remove the hook.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-15-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_tunnel_delete_nets() iterates the dying netns list and performs the
same operations for each.
Let's export ip_tunnel_destroy() as ip_tunnel_delete_net() and call it
from ->exit_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct pernet_operations provides two batching hooks; ->exit_batch()
and ->exit_batch_rtnl().
The batching variant is beneficial if ->exit() meets any of the
following conditions:
1) ->exit() repeatedly acquires a global lock for each netns
2) ->exit() has a time-consuming operation that can be factored
out (e.g. synchronize_rcu(), smp_mb(), etc)
3) ->exit() does not need to repeat the same iterations for each
netns (e.g. inet_twsk_purge())
Currently, none of the ->exit_batch_rtnl() functions satisfy any of
the above conditions because RTNL is factored out and held by the
caller and all of these functions iterate over the dying netns list.
Also, we want to hold per-netns RTNL there but avoid spreading
__rtnl_net_lock() across multiple locations.
Let's add ->exit_rtnl() hook and run it under __rtnl_net_lock().
The following patches will convert all ->exit_batch_rtnl() users
to ->exit_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When enabling DMA mapping in page_pool, pages are kept DMA mapped until
they are released from the pool, to avoid the overhead of re-mapping the
pages every time they are used. This causes resource leaks and/or
crashes when there are pages still outstanding while the device is torn
down, because page_pool will attempt an unmap through a non-existent DMA
device on the subsequent page return.
To fix this, implement a simple tracking of outstanding DMA-mapped pages
in page pool using an xarray. This was first suggested by Mina[0], and
turns out to be fairly straight forward: We simply store pointers to
pages directly in the xarray with xa_alloc() when they are first DMA
mapped, and remove them from the array on unmap. Then, when a page pool
is torn down, it can simply walk the xarray and unmap all pages still
present there before returning, which also allows us to get rid of the
get/put_device() calls in page_pool. Using xa_cmpxchg(), no additional
synchronisation is needed, as a page will only ever be unmapped once.
To avoid having to walk the entire xarray on unmap to find the page
reference, we stash the ID assigned by xa_alloc() into the page
structure itself, using the upper bits of the pp_magic field. This
requires a couple of defines to avoid conflicting with the
POINTER_POISON_DELTA define, but this is all evaluated at compile-time,
so does not affect run-time performance. The bitmap calculations in this
patch gives the following number of bits for different architectures:
- 23 bits on 32-bit architectures
- 21 bits on PPC64 (because of the definition of ILLEGAL_POINTER_VALUE)
- 32 bits on other 64-bit architectures
Stashing a value into the unused bits of pp_magic does have the effect
that it can make the value stored there lie outside the unmappable
range (as governed by the mmap_min_addr sysctl), for architectures that
don't define ILLEGAL_POINTER_VALUE. This means that if one of the
pointers that is aliased to the pp_magic field (such as page->lru.next)
is dereferenced while the page is owned by page_pool, that could lead to
a dereference into userspace, which is a security concern. The risk of
this is mitigated by the fact that (a) we always clear pp_magic before
releasing a page from page_pool, and (b) this would need a
use-after-free bug for struct page, which can have many other risks
since page->lru.next is used as a generic list pointer in multiple
places in the kernel. As such, with this patch we take the position that
this risk is negligible in practice. For more discussion, see[1].
Since all the tracking added in this patch is performed on DMA
map/unmap, no additional code is needed in the fast path, meaning the
performance overhead of this tracking is negligible there. A
micro-benchmark shows that the total overhead of the tracking itself is
about 400 ns (39 cycles(tsc) 395.218 ns; sum for both map and unmap[2]).
Since this cost is only paid on DMA map and unmap, it seems like an
acceptable cost to fix the late unmap issue. Further optimisation can
narrow the cases where this cost is paid (for instance by eliding the
tracking when DMA map/unmap is a no-op).
The extra memory needed to track the pages is neatly encapsulated inside
xarray, which uses the 'struct xa_node' structure to track items. This
structure is 576 bytes long, with slots for 64 items, meaning that a
full node occurs only 9 bytes of overhead per slot it tracks (in
practice, it probably won't be this efficient, but in any case it should
be an acceptable overhead).
[0] https://lore.kernel.org/all/CAHS8izPg7B5DwKfSuzz-iOop_YRbk3Sd6Y4rX7KBG9DcVJcyWg@mail.gmail.com/
[1] https://lore.kernel.org/r/20250320023202.GA25514@openwall.com
[2] https://lore.kernel.org/r/ae07144c-9295-4c9d-a400-153bb689fe9e@huawei.com
Reported-by: Yonglong Liu <liuyonglong@huawei.com>
Closes: https://lore.kernel.org/r/8743264a-9700-4227-a556-5f931c720211@huawei.com
Fixes: ff7d6b27f8 ("page_pool: refurbish version of page_pool code")
Suggested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Tested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Tested-by: Qiuling Ren <qren@redhat.com>
Tested-by: Yuying Ma <yuma@redhat.com>
Tested-by: Yonglong Liu <liuyonglong@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409-page-pool-track-dma-v9-2-6a9ef2e0cba8@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current scheme for caching the encap socket can lead to reference
leaks when we try to delete the netns.
The reference chain is: xfrm_state -> enacp_sk -> netns
Since the encap socket is a userspace socket, it holds a reference on
the netns. If we delete the espintcp state (through flush or
individual delete) before removing the netns, the reference on the
socket is dropped and the netns is correctly deleted. Otherwise, the
netns may not be reachable anymore (if all processes within the ns
have terminated), so we cannot delete the xfrm state to drop its
reference on the socket.
This patch results in a small (~2% in my tests) performance
regression.
A GC-type mechanism could be added for the socket cache, to clear
references if the state hasn't been used "recently", but it's a lot
more complex than just not caching the socket.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
DCCP was removed, so tcp_or_dccp_get_hashinfo() should be renamed.
Let's rename it to tcp_get_hashinfo().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250410023921.11307-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DCCP was removed, so many inet functions no longer need to
be exported.
Let's unexport or use EXPORT_IPV6_MOD() for such functions.
sk_free_unlock_clone() is inlined in sk_clone_lock() as it's
the only caller.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250410023921.11307-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DCCP was orphaned in 2021 by commit 054c4610bd ("MAINTAINERS: dccp:
move Gerrit Renker to CREDITS"), which noted that the last maintainer
had been inactive for five years.
In recent years, it has become a playground for syzbot, and most changes
to DCCP have been odd bug fixes triggered by syzbot. Apart from that,
the only changes have been driven by treewide or networking API updates
or adjustments related to TCP.
Thus, in 2023, we announced we would remove DCCP in 2025 via commit
b144fcaf46 ("dccp: Print deprecation notice.").
Since then, only one individual has contacted the netdev mailing list. [0]
There is ongoing research for Multipath DCCP. The repository is hosted
on GitHub [1], and development is not taking place through the upstream
community. While the repository is published under the GPLv2 license,
the scheduling part remains proprietary, with a LICENSE file [2] stating:
"This is not Open Source software."
The researcher mentioned a plan to address the licensing issue, upstream
the patches, and step up as a maintainer, but there has been no further
communication since then.
Maintaining DCCP for a decade without any real users has become a burden.
Therefore, it's time to remove it.
Removing DCCP will also provide significant benefits to TCP. It allows
us to freely reorganize the layout of struct inet_connection_sock, which
is currently shared with DCCP, and optimize it to reduce the number of
cachelines accessed in the TCP fast path.
Note that we keep DCCP netfilter modules as requested. [3]
Link: https://lore.kernel.org/netdev/20230710182253.81446-1-kuniyu@amazon.com/T/#u #[0]
Link: https://github.com/telekom/mp-dccp #[1]
Link: https://github.com/telekom/mp-dccp/blob/mpdccp_v03_k5.10/net/dccp/non_gpl_scheduler/LICENSE #[2]
Link: https://lore.kernel.org/netdev/Z_VQ0KlCRkqYWXa-@calendula/ #[3]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM and SELinux)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://patch.msgid.link/20250410023921.11307-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP is in TIME_WAIT state, PAWS verification uses
LINUX_PAWSESTABREJECTED, which is ambiguous and cannot be distinguished
from other PAWS verification processes.
We added a new counter, like the existing PAWS_OLD_ACK one.
Also we update the doc with previously missing PAWS_OLD_ACK.
usage:
'''
nstat -az | grep PAWSTimewait
TcpExtPAWSTimewait 1 0.0
'''
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250409112614.16153-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devices in the networking path, such as firewalls, NATs, or routers, which
can perform SNAT or DNAT, use addresses from their own limited address
pools to masquerade the source address during forwarding, causing PAWS
verification to fail more easily.
Currently, packet loss statistics for PAWS can only be viewed through MIB,
which is a global metric and cannot be precisely obtained through tracing
to get the specific 4-tuple of the dropped packet. In the past, we had to
use kprobe ret to retrieve relevant skb information from
tcp_timewait_state_process().
We add a drop_reason pointer, similar to what previous commit does:
commit e34100c2ec ("tcp: add a drop_reason pointer to tcp_check_req()")
This commit addresses the PAWSESTABREJECTED case and also sets the
corresponding drop reason.
We use 'pwru' to test.
Before this commit:
''''
./pwru 'port 9999'
2025/04/07 13:40:19 Listening for events..
TUPLE FUNC
172.31.75.115:12345->172.31.75.114:9999(tcp) sk_skb_reason_drop(SKB_DROP_REASON_NOT_SPECIFIED)
'''
After this commit:
'''
./pwru 'port 9999'
2025/04/07 13:51:34 Listening for events..
TUPLE FUNC
172.31.75.115:12345->172.31.75.114:9999(tcp) sk_skb_reason_drop(SKB_DROP_REASON_TCP_RFC7323_TW_PAWS)
'''
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250409112614.16153-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink().
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr().
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wkGz
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink()
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr()
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority"
* tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ethtool: cmis_cdb: Fix incorrect read / write length extension
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
net: ppp: Add bound checking for skb data on ppp_sync_txmung
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
ipv6: Align behavior across nexthops during path selection
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
net_sched: sch_sfq: move the limit validation
net_sched: sch_sfq: use a temporary work area for validating configuration
net: libwx: handle page_pool_dev_alloc_pages error
selftests: mptcp: validate MPJoin HMacFailure counters
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
rtnetlink: Fix bad unlock balance in do_setlink().
net: ethtool: Don't call .cleanup_data when prepare_data fails
tc: Ensure we have enough buffer space when sending filter netlink notifications
net: libwx: Fix the wrong Rx descriptor field
octeontx2-pf: qos: fix VF root node parent queue index
selftests: tls: check that disconnect does nothing
...
When I ran the repro [0] and waited a few seconds, I observed two
LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1]
Reproduction Steps:
1) Mount CIFS
2) Add an iptables rule to drop incoming FIN packets for CIFS
3) Unmount CIFS
4) Unload the CIFS module
5) Remove the iptables rule
At step 3), the CIFS module calls sock_release() for the underlying
TCP socket, and it returns quickly. However, the socket remains in
FIN_WAIT_1 because incoming FIN packets are dropped.
At this point, the module's refcnt is 0 while the socket is still
alive, so the following rmmod command succeeds.
# ss -tan
State Recv-Q Send-Q Local Address:Port Peer Address:Port
FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445
# lsmod | grep cifs
cifs 1159168 0
This highlights a discrepancy between the lifetime of the CIFS module
and the underlying TCP socket. Even after CIFS calls sock_release()
and it returns, the TCP socket does not die immediately in order to
close the connection gracefully.
While this is generally fine, it causes an issue with LOCKDEP because
CIFS assigns a different lock class to the TCP socket's sk->sk_lock
using sock_lock_init_class_and_name().
Once an incoming packet is processed for the socket or a timer fires,
sk->sk_lock is acquired.
Then, LOCKDEP checks the lock context in check_wait_context(), where
hlock_class() is called to retrieve the lock class. However, since
the module has already been unloaded, hlock_class() logs a warning
and returns NULL, triggering the null-ptr-deref.
If LOCKDEP is enabled, we must ensure that a module calling
sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded
while such a socket is still alive to prevent this issue.
Let's hold the module reference in sock_lock_init_class_and_name()
and release it when the socket is freed in sk_prot_free().
Note that sock_lock_init() clears sk->sk_owner for svc_create_socket()
that calls sock_lock_init_class_and_name() for a listening socket,
which clones a socket by sk_clone_lock() without GFP_ZERO.
[0]:
CIFS_SERVER="10.0.0.137"
CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST"
DEV="enp0s3"
CRED="/root/WindowsCredential.txt"
MNT=$(mktemp -d /tmp/XXXXXX)
mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1
iptables -A INPUT -s ${CIFS_SERVER} -j DROP
for i in $(seq 10);
do
umount ${MNT}
rmmod cifs
sleep 1
done
rm -r ${MNT}
iptables -D INPUT -s ${CIFS_SERVER} -j DROP
[1]:
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
...
Call Trace:
<IRQ>
__lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178)
lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
_raw_spin_lock_nested (kernel/locking/spinlock.c:379)
tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
...
BUG: kernel NULL pointer dereference, address: 00000000000000c4
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G W 6.14.0 #36
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__lock_acquire (kernel/locking/lockdep.c:4852 kernel/locking/lockdep.c:5178)
Code: 15 41 09 c7 41 8b 44 24 20 25 ff 1f 00 00 41 09 c7 8b 84 24 a0 00 00 00 45 89 7c 24 20 41 89 44 24 24 e8 e1 bc ff ff 4c 89 e7 <44> 0f b6 b8 c4 00 00 00 e8 d1 bc ff ff 0f b6 80 c5 00 00 00 88 44
RSP: 0018:ffa0000000468a10 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ff1100010091cc38 RCX: 0000000000000027
RDX: ff1100081f09ca48 RSI: 0000000000000001 RDI: ff1100010091cc88
RBP: ff1100010091c200 R08: ff1100083fe6e228 R09: 00000000ffffbfff
R10: ff1100081eca0000 R11: ff1100083fe10dc0 R12: ff1100010091cc88
R13: 0000000000000001 R14: 0000000000000000 R15: 00000000000424b1
FS: 0000000000000000(0000) GS:ff1100081f080000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c4 CR3: 0000000002c4a003 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
_raw_spin_lock_nested (kernel/locking/spinlock.c:379)
tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (./include/linux/rcupdate.h:878 net/ipv4/ip_input.c:234)
ip_sublist_rcv_finish (net/ipv4/ip_input.c:576)
ip_list_rcv_finish (net/ipv4/ip_input.c:628)
ip_list_rcv (net/ipv4/ip_input.c:670)
__netif_receive_skb_list_core (net/core/dev.c:5939 net/core/dev.c:5986)
netif_receive_skb_list_internal (net/core/dev.c:6040 net/core/dev.c:6129)
napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:519 ./include/net/gro.h:514 net/core/dev.c:6496)
e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3815)
__napi_poll.constprop.0 (net/core/dev.c:7191)
net_rx_action (net/core/dev.c:7262 net/core/dev.c:7382)
handle_softirqs (kernel/softirq.c:561)
__irq_exit_rcu (kernel/softirq.c:596 kernel/softirq.c:435 kernel/softirq.c:662)
irq_exit_rcu (kernel/softirq.c:680)
common_interrupt (arch/x86/kernel/irq.c:280 (discriminator 14))
</IRQ>
<TASK>
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:693)
RIP: 0010:default_idle (./arch/x86/include/asm/irqflags.h:37 ./arch/x86/include/asm/irqflags.h:92 arch/x86/kernel/process.c:744)
Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d c3 2b 15 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90
RSP: 0018:ffa00000000ffee8 EFLAGS: 00000202
RAX: 000000000000640b RBX: ff1100010091c200 RCX: 0000000000061aa4
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff812f30c5
RBP: 000000000000000a R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
default_idle_call (./include/linux/cpuidle.h:143 kernel/sched/idle.c:118)
do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
cpu_startup_entry (kernel/sched/idle.c:422 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:315)
common_startup_64 (arch/x86/kernel/head_64.S:421)
</TASK>
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CR2: 00000000000000c4
Fixes: ed07536ed6 ("[PATCH] lockdep: annotate nfs/nfsd in-kernel sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250407163313.22682-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We mostly needed rtnl_lock in qstat to make sure the queue count
is stable while we work. For "ops locked" drivers the instance
lock protects the queue count, so we don't have to take rtnl_lock.
For currently ops-locked drivers: netdevsim and bnxt need
the protection from netdev going down while we dump, which
instance lock provides. gve doesn't care.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Protect xdp_features with netdev->lock. This way pure readers
no longer have to take rtnl_lock to access the field.
This includes calling NETDEV_XDP_FEAT_CHANGE under the lock.
Looks like that's fine for bonding, the only "real" listener,
it's the same as ethtool feature change.
In terms of normal drivers - only GVE need special consideration
(other drivers don't use instance lock or don't support XDP).
It calls xdp_set_features_flag() helper from gve_init_priv() which
in turn is called from gve_reset_recovery() (locked), or prior
to netdev registration. So switch to _locked.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250408195956.412733-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helpers to "lock a netdev in a backward-compatible way",
which for ops-locked netdevs will mean take the instance lock.
For drivers which haven't opted into the ops locking we'll take
rtnl_lock.
The scoped foreach is dropping and re-taking the lock for each
device, even if prev and next are both under rtnl_lock.
I hope that's fine since we expect that netdev nl to be mostly
supported by modern drivers, and modern drivers should also
opt into the instance locking.
Note that these helpers are mostly needed for queue related state,
because drivers modify queue config in their ops in a non-atomic
way. Or differently put, queue changes don't have a clear-cut API
like NAPI configuration. Any state that can should just use the
instance lock directly, not the "compat" hacks.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Read accesses go via xsk_get_pool_from_qid(), the call coming
from the core and gve look safe (other "ops locked" drivers
don't support XSK).
Write accesses go via xsk_reg_pool_at_qid() and xsk_clear_pool_at_qid().
Former is already under the ops lock, latter is not (both coming from
the workqueue via xp_clear_dev() and NETDEV_UNREGISTER via xsk_notifier()).
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's quite common to have a single UDP tunnel type active in the
whole system. In such a case we can replace the indirect call for
the UDP tunnel GRO callback with a static call.
Add the related accounting in the control path and switch to static
call when possible. To keep the code simple use a static array for
the registered tunnel types, and size such array based on the kernel
config.
Note that there are valid kernel configurations leading to
UDP_MAX_TUNNEL_TYPES == 0 even with IS_ENABLED(CONFIG_NET_UDP_TUNNEL),
Explicitly skip the accounting in such a case, to avoid compile warning
when accessing "udp_tunnel_gro_types".
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/53d156cdfddcc9678449e873cc83e68fa1582653.1744040675.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most UDP tunnels bind a socket to a local port, with ANY address, no
peer and no interface index specified.
Additionally it's quite common to have a single tunnel device per
namespace.
Track in each namespace the UDP tunnel socket respecting the above.
When only a single one is present, store a reference in the netns.
When such reference is not NULL, UDP tunnel GRO lookup just need to
match the incoming packet destination port vs the socket local port.
The tunnel socket never sets the reuse[port] flag[s]. When bound to no
address and interface, no other socket can exist in the same netns
matching the specified local port.
Matching packets with non-local destination addresses will be
aggregated, and eventually segmented as needed - no behavior changes
intended.
Restrict the optimization to kernel sockets only: it covers all the
relevant use-cases, and user-space owned sockets could be disconnected
and rebound after setup_udp_tunnel_sock(), breaking the uniqueness
assumption
Note that the UDP tunnel socket reference is stored into struct
netns_ipv4 for both IPv4 and IPv6 tunnels. That is intentional to keep
all the fastpath-related netns fields in the same struct and allow
cacheline-based optimization. Currently both the IPv4 and IPv6 socket
pointer share the same cacheline as the `udp_table` field.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/41d16bc8d1257d567f9344c445b4ae0b4a91ede4.1744040675.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an rcu_head to sd_flow_limit and rps_sock_flow_table structs
to use the more conventional and predictable k[v]free_rcu().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250407163602.170356-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_sendmsg() re-uses associations and transports when possible by
doing a lookup based on the socket endpoint and the message destination
address, and then sctp_sendmsg_to_asoc() sets the selected transport in
all the message chunks to be sent.
There's a possible race condition if another thread triggers the removal
of that selected transport, for instance, by explicitly unbinding an
address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have
been set up and before the message is sent. This can happen if the send
buffer is full, during the period when the sender thread temporarily
releases the socket lock in sctp_wait_for_sndbuf().
This causes the access to the transport data in
sctp_outq_select_transport(), when the association outqueue is flushed,
to result in a use-after-free read.
This change avoids this scenario by having sctp_transport_free() signal
the freeing of the transport, tagging it as "dead". In order to do this,
the patch restores the "dead" bit in struct sctp_transport, which was
removed in
commit 47faa1e4c5 ("sctp: remove the dead field of sctp_transport").
Then, in the scenario where the sender thread has released the socket
lock in sctp_wait_for_sndbuf(), the bit is checked again after
re-acquiring the socket lock to detect the deletion. This is done while
holding a reference to the transport to prevent it from being freed in
the process.
If the transport was deleted while the socket lock was relinquished,
sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the
send.
The bug was found by a private syzbot instance (see the error report [1]
and the C reproducer that triggers it [2]).
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport.txt [1]
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport__repro.c [2]
Cc: stable@vger.kernel.org
Fixes: df132eff46 ("sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250404-kasan_slab-use-after-free_read_in_sctp_outq_select_transport__20250404-v1-1-5ce4a0b78ef2@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
devmem code performs a number of safety checks to avoid having
to reimplement all of them in the drivers. Move those to
__net_mp_open_rxq() and reuse that function for binding to make
sure that io_uring ZC also benefits from them.
While at it rename the queue ID variable to rxq_idx in
__net_mp_open_rxq(), we touch most of the relevant lines.
The XArray insertion is reordered after the netdev_rx_queue_restart()
call, otherwise we'd need to duplicate the queue index check
or risk inserting an invalid pointer. The XArray allocation
failures should be extremely rare.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: 6e18ed929d ("net: add helpers for setting a memory provider on an rx queue")
Link: https://patch.msgid.link/20250403013405.2827250-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to exercise and verify notifiers' locking assumptions,
register dummy notifiers (via register_netdevice_notifier_dev_net).
Share notifier event handler that enforces the assumptions with
lock_debug.c (rename and export rtnl_net_debug_event as
netdev_debug_event). Add ops lock asserts to netdev_debug_event.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_add_dev might call dev_disable_lro which unconditionally grabs
instance lock, so it will deadlock during NETDEV_REGISTER. Switch
to netif_disable_lro.
Make sure all callers hold the instance lock as well.
Cc: Cosmin Ratiu <cratiu@nvidia.com>
Fixes: ad7c7b2172 ("net: hold netdev instance lock during sysfs operations")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc",
error queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported,
avoid spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmfrLiQACgkQMUZtbf5S
IrvDsg//VH5VmkMau/TUF1WpwA03Wb/X0UqtM72lufVCMGYCogqjHZzs9popfhuu
CCi4ZiBofEJHfN9WYJoumUL8aOdux0Q875o7h5gvfqKCokkUbJDk3W32QiLj1RqZ
L14TorNOyS9Tg9m60pLa/6H3WS0kduhUGLuLzgTmOtT/YVJrOGmBtk/tRXFAKclH
f3CPucvZGS5Fr4HfUc3yWXiocjibDJnv+jE+xW6S6YHpghvsK7anUvqIGTqQV8Vp
s6AuvFULGO00968hFHcO0N8f8MnaCCJr2bcHCOXyjssdEbdvDOqzhFN4KhxWEPbK
kCl3rLkPdkXo+ekOC7gIxXXaKVz3IVm28pegtEws8fda/iLuqZTp+BKo7kdrf3Iy
br0rP/iK3eFN0M1XpVUIbmEuJ6VamztCzK88uvDKdI+Ol3GLAfy9v5NmkbzJI+aE
cw+SyE6NgbeDeHBxvOu2F7G2sWMBkTEGaHMNXCv7I/VAvQsbk48onTVnpA+GlFD5
vFqMxiZHLBUfFOfUcHxmw8KAkZ44pc1xEkpw/4s8GZOfq+1oWz2LrSQ8M8Hjs2VN
NTuE44OOsBDPOJ54iDAIOr5jyF+ZDeWEuPbvWbHGri80gII+2iF2788N2ToyAkyR
R0t4VtJwXF+8D6IxTG41OIvAuq9Zc8AqM6O7VnOyFhZtKqezBTI=
=BDoM
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Rather tiny pull request, mostly so that we can get into our trees
your fix to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc", error
queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported, avoid
spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files"
* tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc"
bnxt_en: bring back rtnl lock in bnxt_shutdown
eth: gve: add missing netdev locks on reset and shutdown paths
selftests: mptcp: ignore mptcp_diag binary
selftests: mptcp: close fd_in before returning in main_loop
selftests: mptcp: fix incorrect fd checks in main_loop
mptcp: fix NULL pointer in can_accept_new_subflow
octeontx2-af: Free NIX_AF_INT_VEC_GEN irq
octeontx2-af: Fix mbox INTR handler when num VFs > 64
net: fix use-after-free in the netdev_nl_sock_priv_destroy()
selftests: net: use Path helpers in ping
selftests: net: use the dummy bpf from net/lib
selftests: drv-net: replace the rpath helper with Path objects
net: lapbether: use netdev_lockdep_set_classes() helper
net: phy: broadcom: Correct BCM5221 PHY model detection
net: usb: usbnet: restore usb%d name exception for local mac addresses
net/mlx5e: SHAMPO, Make reserved size independent of page size
net: mana: Switch to page pool for jumbo frames
MAINTAINERS: Add dedicated entries for phy_link_topology
net: move replay logic to tc_modify_qdisc
...
Uros Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was founf to be incorrect.
- The 4 patch series "Some cleanup for memcg" from Chen Ridong
implements some relatively monir cleanups for the memcontrol code.
- The 17 patch series "mm: fixes for device-exclusive entries (hmm)"
from David Hildenbrand fixes a boatload of issues which David found then
using device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now succeed.
- The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry
Ahmed remove the z3fold and zbud implementations. They have been
deprecated for half a year and nobody has complained.
- The 5 patch series "mm: further simplify VMA merge operation" from
Lorenzo Stoakes implements numerous simplifications in this area. No
runtime effects are anticipated.
- The 4 patch series "mm/madvise: remove redundant mmap_lock operations
from process_madvise()" from SeongJae Park rationalizes the locking in
the madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The 12 patch series "Tiny cleanup and improvements about SWAP code"
from Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The 2 patch series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak user-visible
output.
- The 2 patch series "mm/damon/paddr: fix large folios access and
schemes handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The 3 patch series "mm/damon/core: fix wrong and/or useless
damos_walk() behaviors" from SeongJae Park fixes a few issues with the
accuracy of kdamond's walking of DAMON regions.
- The 3 patch series "expose mapping wrprotect, fix fb_defio use" from
Lorenzo Stoakes changes the interaction between framebuffer deferred-io
and core MM. No functional changes are anticipated - this is
preparatory work for the future removal of page structure fields.
- The 4 patch series "mm/damon: add support for hugepage_size DAMOS
filter" from Usama Arif adds a DAMOS filter which permits the filtering
by huge page sizes.
- The 4 patch series "mm: permit guard regions for file-backed/shmem
mappings" from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The 4 patch series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping for
pte-mapped large folios.
- The 18 patch series "reimplement per-vma lock as a refcount" from
Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation
fixes and improves" from SeongJae Park does some maintenance work on the
DAMON docs.
- The 27 patch series "hugetlb/CMA improvements for large systems" from
Frank van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped
pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The 19 patch series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The 12 patch series "selftests/mm: Some cleanups from trying to run
them" from Brendan Jackman fixes a pile of unrelated issues which
Brendan encountered while runnimg our selftests.
- The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap"
from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply wasn't
being effective.
- The 5 patch series "mm: cleanups for device-exclusive entries (hmm)"
from David Hildenbrand implements a number of unrelated cleanups in this
code.
- The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman
Khandual implements a number of preparatoty cleanups to the
GENERIC_PTDUMP Kconfig logic.
- The 8 patch series "mm/damon: auto-tune aggregation interval" from
SeongJae Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some
issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did
this in preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The 2 patch series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the code
easier to follow.
- The 3 patch series "page_counter cleanup and size reduction" from
Shakeel Butt cleans up the page_counter code and fixes a size increase
which we accidentally added late last year.
- The 3 patch series "Add a command line option that enables control of
how many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The 3 patch series "Fix calculations in trace_balance_dirty_pages()
for cgwb" from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The 9 patch series "mm/damon: make allow filters after reject filters
useful and intuitive" from SeongJae Park improves the handling of allow
and reject filters. Behaviour is made more consistent and the
documention is updated accordingly.
- The 5 patch series "Switch zswap to object read/write APIs" from Yosry
Ahmed updates zswap to the new object read/write APIs and thus permits
the removal of some legacy code from zpool and zsmalloc.
- The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang
does as it claims.
- The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts"
from Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes
is a preparatoty refactoring and cleanup of the mremap() code.
- The 20 patch series "mm: MM owner tracking for large folios (!hugetlb)
+ CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS
filters based on handling layers" from SeongJae Park adds a couple of
new sysfs directories to ease the management of DAMON/DAMOS filters.
- The 13 patch series "arch, mm: reduce code duplication in mem_init()"
from Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The 13 patch series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The 3 patch series "mm: page_ext: Introduce new iteration API" from
Luiz Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The 8 patch series "Buddy allocator like (or non-uniform) folio split"
from Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios are
generated.
- The 2 patch series "Minimize xa_node allocation during xarry split"
from Zi Yan reduces the number of xarray xa_nodes which are generated
during an xarray split.
- The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The 3 patch series "Add tracepoints for lowmem reserves, watermarks
and totalreserve_pages" from Martin Liu adds some more tracepoints to
the page allocator code.
- The 4 patch series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which SeongJae
observed during his earlier madvise work.
- The 3 patch series "mm/hwpoison: Fix regressions in memory failure
handling" from Shuai Xue addresses two quite serious regressions which
Shuai has observed in the memory-failure implementation.
- The 5 patch series "mm: reliable huge page allocator" from Johannes
Weiner makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The 5 patch series "Minor memcg cleanups & prep for memdescs" from
Matthew Wilcox is preparatory work for the future implementation of
memdescs.
- The 4 patch series "track memory used by balloon drivers" from Nico
Pache introduces a way to track memory used by our various balloon
drivers.
- The 2 patch series "mm/damon: introduce DAMOS filter type for active
pages" from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The 2 patch series "Adding Proactive Memory Reclaim Statistics" from
Hao Jia separates the proactive reclaim statistics from the direct
reclaim statistics.
- The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio"
from Jinjiang Tu fixes our handling of hwpoisoned pages within the
reclaim code.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA
jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF
Ee93qSSLR1BkNdDw+931Pu0mXfbnBw==
=Pn2K
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
This reverts commit 0de2a5c4b8.
I forgot that a TCP socket could receive messages in its error queue.
sock_queue_err_skb() can be called without socket lock being held,
and changes sk->sk_rmem_alloc.
The fact that skbs in error queue are limited by sk->sk_rcvbuf
means that error messages can be dropped if socket receive
queues are full, which is an orthogonal issue.
In future kernels, we could use a separate sk->sk_error_mem_alloc
counter specifically for the error queue.
Fixes: 0de2a5c4b8 ("tcp: avoid atomic operations on sk->sk_rmem_alloc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250331075946.31960-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser, mlx5,
vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting in-kernel
verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism to
access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ+ap4gAKCRCFwuHvBreF
YaFHAP9wyeZCZIbnWaGcbNdbsmkEgy7aTVILRHf1NA7VSJ211gD9Ha60E+mkwtvA
i7IJ49R2BdqzKaO9oTutj2Lw+8rABwQ=
=qXhh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser,
mlx5, vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting
in-kernel verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism
to access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (73 commits)
IB/mad: Check available slots before posting receive WRs
RDMA/mana_ib: Fix integer overflow during queue creation
RDMA/mlx5: Fix calculation of total invalidated pages
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
RDMA/mlx5: Fix page_size variable overflow
RDMA/mlx5: Drop access_flags from _mlx5_mr_cache_alloc()
RDMA/mlx5: Fix cache entry update on dereg error
RDMA/mlx5: Fix MR cache initialization error flow
RDMA/mlx5: Support optional-counters binding for QPs
RDMA/mlx5: Compile fs.c regardless of INFINIBAND_USER_ACCESS config
RDMA/core: Pass port to counter bind/unbind operations
RDMA/core: Add support to optional-counters binding configuration
RDMA/core: Create and destroy rdma_counter using rdma_zalloc_drv_obj()
RDMA/mlx5: Add optional counters for RDMA_TX/RX_packets/bytes
RDMA/core: Fix use-after-free when rename device name
RDMA/bnxt_re: Support perf management counters
RDMA/rxe: Fix incorrect return value of rxe_odp_atomic_op()
RDMA/uverbs: Propagate errors from rdma_lookup_get_uobject()
RDMA/mana_ib: Handle net event for pointing to the current netdev
net: mana: Change the function signature of mana_get_primary_netdev_rcu
...
Core & protocols
----------------
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls).
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked)
in BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream performance
up to 2x.
- Improve performance of contended connect() by 200% by searching
for an available 4-tuple under RCU rather than a spin lock.
Bring an additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles.
There are up to 4 namespace roles but we used to have just 2 netns
pointer arguments, interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout
in TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar
to normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name
to messages as metadata
Driver API
----------
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where possible.
Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers
--------------
- Remove the IBM LCS driver for s390.
- Remove the sb1000 cable modem driver.
- Add support for SFP module access over SMBus.
- Add MCTP transport driver for MCTP-over-USB.
- Enable XDP metadata support in multiple drivers.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96% with
1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmfkLC8ACgkQMUZtbf5S
Irsb5g/+L7oKOf0ALbaV9kxFsoz8AymZfAW9i/27F07omGJGpks8oX6j6rQLgIRO
OQOFcp7XEdDh1+jh82gHVuPrw2/6lchLtW8ARtzdiQKFr5DRjrsbtua6GRc8iBqA
DIRCBFoV2HuMkF39Vr09HMa9AZAT7QR2RLsRGpSq8E8Z8xxKz0X7oujs10PFpMTE
IVKhTrVrk+NDot/IU2hzVpnpup+0ld+T2/ZaBklJGcU8uDffImsqNepHRyCG5UC3
xz74Ju23MAj24Gct+og0yFUooF+lUltKyVm0FYCDCY3bASTwgY01NR3kEH/0NQvM
cywLzd/ngHm/SMD2ggVAHkjZUieiIVHdaZ53dgjDeBOQoVP6p0dgUK7EumXX8Mx4
8ReR2UiGoYRPaq9c4o+IjG4K027MwVK2p+mF1a6MLa+20XcyMbev8FIRbbHtC/V4
z5/FsOAxcuICWkA1hU9bODrrGzIqemmdRgKG8sGuTJCt/kYGAn72/TCATGNSaCJ0
00n2jN1aepa7wtywHJ5MhVzxN9iQX7+geUHXz0BI+lK4e1Pmk+vjGksymb9ai2fk
eQAUV9ekub6q68/J16scD7XeOUM37bTLiMBQeIF8UtZBOJscKiS71zn9QP9Twwxv
P2pm01RDZUI+z5ZX3hc12Pm1vjRHaAh9S1JpAw/pTOVlQ+mAJEM=
=XY0S
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
Merge in late fixes to prepare for the 6.15 net-next PR.
No conflicts, adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
919f9f497d ("eth: bnxt: fix out-of-range access of vnic_info array")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After merging the apparmor tree, today's linux-next build (x86_64
allmodconfig) failed like this:
security/apparmor/af_unix.c: In function 'unix_state_double_lock':
security/apparmor/af_unix.c:627:17: error: implicit declaration of function 'unix_state_lock'; did you mean 'unix_state_double_lock'? [-Wimplicit-function-declaration]
627 | unix_state_lock(sk1);
| ^~~~~~~~~~~~~~~
| unix_state_double_lock
security/apparmor/af_unix.c: In function 'unix_state_double_unlock':
security/apparmor/af_unix.c:642:17: error: implicit declaration of function 'unix_state_unlock'; did you mean 'unix_state_double_lock'? [-Wimplicit-function-declaration]
642 | unix_state_unlock(sk1);
| ^~~~~~~~~~~~~~~~~
| unix_state_double_lock
Caused by commit
c05e705812 ("apparmor: add fine grained af_unix mediation")
interacting with commit
84960bf240 ("af_unix: Move internal definitions to net/unix/.")
from the net-next tree.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patch.msgid.link/20250326150148.72d9138d@canb.auug.org.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like what
I did last cycle for the CRC32 and CRC-T10DIF library functions.
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme.
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme.
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since they
are no longer needed there.
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect.
- Add kunit test cases for crc64_nvme and crc7.
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c().
- Remove unnecessary prompts from some of the CRC kconfig options.
- Further optimize the x86 crc32c code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CGGhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3wRAP4tbnzawUmlIHIF0hleoADXehUgAhMt
NZn15mGvyiuwIQEA8W9qvnLdFXZkdxhxAEvDDFjyrRauL6eGtr/GvCx4AQY=
=wmKG
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
core:
- Add support for skb TX SND/COMPLETION timestamping
- hci_core: Enable buffer flow control for SCO/eSCO
- coredump: Log devcd dumps into the monitor
drivers:
- btusb: Add 2 HWIDs for MT7922
- btusb: Fix regression in the initialization of fake Bluetooth controllers
- btusb: Add 14 USB device IDs for Qualcomm WCN785x
- btintel: Add support for Intel Scorpius Peak
- btintel: Add support to configure TX power
- btintel: Add DSBR support for ScP
- btintel_pcie: Add device id of Whale Peak
- btintel_pcie: Setup buffers for firmware traces
- btintel_pcie: Read hardware exception data
- btintel_pcie: Add support for device coredump
- btintel_pcie: Trigger device coredump on hardware exception
- btnxpuart: Support for controller wakeup gpio config
- btnxpuart: Add support to set BD address
- btnxpuart: Add correct bootloader error codes
- btnxpuart: Handle bootloader error during cmd5 and cmd7
- btnxpuart: Fix kernel panic during FW release
- qca: add WCN3950 support
- hci_qca: use the power sequencer for wcn6750
- btmtksdio: Prevent enabling interrupts after IRQ handler removal
-----BEGIN PGP SIGNATURE-----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=XCdn
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2025-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- Add support for skb TX SND/COMPLETION timestamping
- hci_core: Enable buffer flow control for SCO/eSCO
- coredump: Log devcd dumps into the monitor
drivers:
- btusb: Add 2 HWIDs for MT7922
- btusb: Fix regression in the initialization of fake Bluetooth controllers
- btusb: Add 14 USB device IDs for Qualcomm WCN785x
- btintel: Add support for Intel Scorpius Peak
- btintel: Add support to configure TX power
- btintel: Add DSBR support for ScP
- btintel_pcie: Add device id of Whale Peak
- btintel_pcie: Setup buffers for firmware traces
- btintel_pcie: Read hardware exception data
- btintel_pcie: Add support for device coredump
- btintel_pcie: Trigger device coredump on hardware exception
- btnxpuart: Support for controller wakeup gpio config
- btnxpuart: Add support to set BD address
- btnxpuart: Add correct bootloader error codes
- btnxpuart: Handle bootloader error during cmd5 and cmd7
- btnxpuart: Fix kernel panic during FW release
- qca: add WCN3950 support
- hci_qca: use the power sequencer for wcn6750
- btmtksdio: Prevent enabling interrupts after IRQ handler removal
* tag 'for-net-next-2025-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (53 commits)
Bluetooth: MGMT: Add LL Privacy Setting
Bluetooth: hci_event: Fix handling of HCI_EV_LE_DIRECT_ADV_REPORT
Bluetooth: btnxpuart: Fix kernel panic during FW release
Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7
Bluetooth: btnxpuart: Add correct bootloader error codes
t blameBluetooth: btintel: Fix leading white space
Bluetooth: btintel: Add support to configure TX power
Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal
Bluetooth: btmtk: Remove the resetting step before downloading the fw
Bluetooth: SCO: add TX timestamping
Bluetooth: L2CAP: add TX timestamping
Bluetooth: ISO: add TX timestamping
Bluetooth: add support for skb TX SND/COMPLETION timestamping
net-timestamp: COMPLETION timestamp on packet tx completion
HCI: coredump: Log devcd dumps into the monitor
Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel
Bluetooth: hci_vhci: Mark Sync Flow Control as supported
Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO
Bluetooth: btintel_pci: Fix build warning
Bluetooth: btintel_pcie: Trigger device coredump on hardware exception
...
====================
Link: https://patch.msgid.link/20250325192925.2497890-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds LL Privacy (bit 22) to Read Controller Information so the likes
of bluetoothd(1) can detect when the controller supports it or not.
Fixes: e209e5ccc5 ("Bluetooth: MGMT: Mark LL Privacy as stable")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
icsk->icsk_ack.timeout can be replaced by icsk->csk_delack_timer.expires
This saves 8 bytes in TCP/DCCP sockets and helps for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250324203607.703850-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icsk->icsk_timeout can be replaced by icsk->icsk_retransmit_timer.expires
This saves 8 bytes in TCP/DCCP sockets and helps for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250324203607.703850-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev netlink is the only reader of netdev_{,rx_}queue->napi,
and it already holds netdev->lock. Switch protection of
the writes to netdev->lock to "ops protected".
The expectation will be now that accessing queue->napi
will require netdev->lock for "ops locked" drivers, and
rtnl_lock for all other drivers.
Current "ops locked" drivers don't require any changes.
gve and netdevsim use _locked() helpers right next to
netif_queue_set_napi() so they must be holding the instance
lock. iavf doesn't call it. bnxt is a bit messy but all paths
seem locked.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Try to define some terminology for which fields are protected
by which lock and how. Some fields are protected by both rtnl_lock
and instance lock which is hard to talk about without having
a "key phrase" to refer to a particular protection scheme.
"ops protected" fields are defined later in the series, one by one.
Add ASSERT_RTNL() to netdev_ops_assert_locked() for drivers
not other instance protection of ops. Hopefully it's not too
confusion that netdev_lock_ops() does not match the lock which
netdev_ops_assert_locked() will assert, exactly. The noun "ops"
is in a different place in the name, so I think it's acceptable...
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lockdep asserts and predicates can operate on const pointers.
In the future this will let us add asserts in functions
which operate on const pointers like dev_get_min_mp_channel_count().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support TX timestamping in L2CAP sockets.
Support MSG_ERRQUEUE recvmsg.
For other than SOCK_STREAM L2CAP sockets, if a packet from sendmsg() is
fragmented, only the first ACL fragment is timestamped.
For SOCK_STREAM L2CAP sockets, use the bytestream convention and
timestamp the last fragment and count bytes in tskey.
Timestamps are not generated in the Enhanced Retransmission mode, as
meaning of COMPLETION stamp is unclear if L2CAP layer retransmits.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add BT_SCM_ERROR socket CMSG type.
Support TX timestamping in ISO sockets.
Support MSG_ERRQUEUE in ISO recvmsg.
If a packet from sendmsg() is fragmented, only the first ACL fragment is
timestamped.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Support enabling TX timestamping for some skbs, and track them until
packet completion. Generate software SCM_TSTAMP_COMPLETION when getting
completion report from hardware.
Generate software SCM_TSTAMP_SND before sending to driver. Sending from
driver requires changes in the driver API, and drivers mostly are going
to send the skb immediately.
Make the default situation with no COMPLETION TX timestamping more
efficient by only counting packets in the queue when there is nothing to
track. When there is something to track, we need to make clones, since
the driver may modify sent skbs.
The tx_q queue length is bounded by the hdev flow control, which will
not send new packets before it has got completion reports for old ones.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Return Parameters is not only status, also bdaddr:
BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E
page 1870:
BLUETOOTH CORE SPECIFICATION Version 5.0 | Vol 2, Part E
page 802:
Return parameters:
Status:
Size: 1 octet
BD_ADDR:
Size: 6 octets
Note that it also fixes the warning:
"Bluetooth: hci0: unexpected cc 0x041a length: 7 > 1"
Fixes: c8992cffbe ("Bluetooth: hci_event: Use of a function table to handle Command Complete")
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_PAGE_SCAN_TYPE.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_VOICE_SETTING.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() for readability.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mgmt_start_discovery_complete() and mgmt_stop_discovery_complete() last
uses were removed in 2022 by
commit ec2904c259 ("Bluetooth: Remove dead code from hci_request.c")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Revert "udp_tunnel: use static call for GRO hooks when possible"
This reverts commit 311b36574c.
Revert "udp_tunnel: create a fastpath GRO lookup."
This reverts commit 8d4880db37.
There are multiple small issues with the series. In the interest
of unblocking the merge window let's opt for a revert.
Link: https://lore.kernel.org/cover.1742557254.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9RMg
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2025-03-24
1) Prevent setting high order sequence number bits input in
non-ESN mode. From Leon Romanovsky.
2) Support PMTU handling in tunnel mode for packet offload.
From Leon Romanovsky.
3) Make xfrm_state_lookup_byaddr lockless.
From Florian Westphal.
4) Remove unnecessary NULL check in xfrm_lookup_with_ifid().
From Dan Carpenter.
* tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Remove unnecessary NULL check in xfrm_lookup_with_ifid()
xfrm: state: make xfrm_state_lookup_byaddr lockless
xfrm: check for PMTU in tunnel mode for packet offload
xfrm: provide common xdo_dev_offload_ok callback implementation
xfrm: rely on XFRM offload
xfrm: simplify SA initialization routine
xfrm: delay initialization of offload path till its actually requested
xfrm: prevent high SEQ input in non-ESN mode
====================
Link: https://patch.msgid.link/20250324061855.4116819-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=b5n2
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
1) Use kvmalloc in xt_hashlimit, from Denis Kirjanov.
2) Tighten nf_conntrack sysctl accepted values for nf_conntrack_max
and nf_ct_expect_max, from Nicolas Bouchinet.
3) Avoid lookup in nft_fib if socket is available, from Florian Westphal.
4) Initialize struct lsm_context in nfnetlink_queue to avoid
hypothetical ENOMEM errors, Chenyuan Yang.
5) Use strscpy() instead of _pad when initializing xtables table name,
kzalloc is already used to initialized the table memory area.
From Thorsten Blum.
6) Missing socket lookup by conntrack information for IPv6 traffic
in nft_socket, there is a similar chunk in IPv4, this was never
added when IPv6 NAT was introduced. From Maxim Mikityanskiy.
7) Fix clang issues with nf_tables CONFIG_MITIGATION_RETPOLINE,
from WangYuli.
* tag 'nf-next-25-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: Only use nf_skip_indirect_calls() when MITIGATION_RETPOLINE
netfilter: socket: Lookup orig tuple for IPv6 SNAT
netfilter: xtables: Use strscpy() instead of strscpy_pad()
netfilter: nfnetlink_queue: Initialize ctx to avoid memory allocation error
netfilter: fib: avoid lookup if socket is available
netfilter: conntrack: Bound nf_conntrack sysctl writes
netfilter: xt_hashlimit: replace vmalloc calls with kvmalloc
====================
Link: https://patch.msgid.link/20250323100922.59983-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFS is using two kinds of hash tables.
First one is controlled by /proc/sys/net/core/rps_sock_flow_entries = 2^N
and using the N low order bits of the l4 hash is good enough.
Then each RX queue has its own hash table, controlled by
/sys/class/net/eth1/queues/rx-$q/rps_flow_cnt = 2^X
Current hash function, using the X low order bits is suboptimal,
because RSS is usually using Func(hash) = (hash % power_of_two);
For example, with 32 RX queues, 6 low order bits have no entropy
for a given queue.
Switch this hash function to hash_32(hash, log) to increase
chances to use all possible slots and reduce collisions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250321171309.634100-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* cfg80211/mac80211: fix and enable link reconfiguration
* rtw88: support RTL8814AE/RTL8814AU
* mt7996: preparations for MLO
* ath12k: continued work on MLO
* iwlwifi: add new iwlmld sub-driver/op-mode for
some current and future devices
* wfx: wowlan support
-----BEGIN PGP SIGNATURE-----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=HSDM
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
More features for 6.15, major changes:
* cfg80211/mac80211: fix and enable link reconfiguration
* rtw88: support RTL8814AE/RTL8814AU
* mt7996: preparations for MLO
* ath12k: continued work on MLO
* iwlwifi: add new iwlmld sub-driver/op-mode for
some current and future devices
* wfx: wowlan support
* tag 'wireless-next-2025-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (311 commits)
wifi: mt76: mt7996: fix locking in mt7996_mac_sta_rc_work()
wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table
wifi: mt76: mt792x: re-register CHANCTX_STA_CSA only for the mt7921 series
wifi: mt76: mt7996: Update mt7996_tx to MLO support
wifi: mt76: mt7996: rework mt7996_ampdu_action to support MLO
wifi: mt76: mt7996: rework set/get_tsf callabcks to support MLO
wifi: mt76: mt7996: set vif default link_id adding/removing vif links
wifi: mt76: mt7996: rework mt7996_mcu_beacon_inband_discov to support MLO
wifi: mt76: mt7996: rework mt7996_mcu_add_obss_spr to support MLO
wifi: mt76: mt7996: rework mt7996_net_fill_forward_path to support MLO
wifi: mt76: mt7996: rework mt7996_update_mu_group to support MLO
wifi: mt76: mt7996: rework mt7996_mac_sta_poll to support MLO
wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO
wifi: mt76: mt7996: remove mt7996_mac_enable_rtscts()
wifi: mt76: mt7996: rework mt7996_sta_hw_queue_read to support MLO
wifi: mt76: mt7996: rework mt7996_set_hw_key to support MLO
wifi: mt76: mt7996: Add mt7996_sta_link to mt7996_mcu_add_bss_info signature
wifi: mt76: mt7996: rework mt7996_sta_set_4addr and mt7996_sta_set_decap_offload to support MLO
wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO
wifi: mt76: mt7996: Rely on wcid_to_sta in mt7996_mac_add_txs_skb()
...
====================
Link: https://patch.msgid.link/20250320131106.33266-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following operations can trigger a warning[1]:
ip netns add ns1
ip netns exec ns1 ip link add bond0 type bond mode balance-rr
ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp
ip netns exec ns1 ip link set bond0 type bond mode broadcast
ip netns del ns1
When delete the namespace, dev_xdp_uninstall() is called to remove xdp
program on bond dev, and bond_xdp_set() will check the bond mode. If bond
mode is changed after attaching xdp program, the warning may occur.
Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode
with xdp program attached is not good. Add check for xdp program when set
bond mode.
[1]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 11 at net/core/dev.c:9912 unregister_netdevice_many_notify+0x8d9/0x930
Modules linked in:
CPU: 0 UID: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.14.0-rc4 #107
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
Workqueue: netns cleanup_net
RIP: 0010:unregister_netdevice_many_notify+0x8d9/0x930
Code: 00 00 48 c7 c6 6f e3 a2 82 48 c7 c7 d0 b3 96 82 e8 9c 10 3e ...
RSP: 0018:ffffc90000063d80 EFLAGS: 00000282
RAX: 00000000ffffffa1 RBX: ffff888004959000 RCX: 00000000ffffdfff
RDX: 0000000000000000 RSI: 00000000ffffffea RDI: ffffc90000063b48
RBP: ffffc90000063e28 R08: ffffffff82d39b28 R09: 0000000000009ffb
R10: 0000000000000175 R11: ffffffff82d09b40 R12: ffff8880049598e8
R13: 0000000000000001 R14: dead000000000100 R15: ffffc90000045000
FS: 0000000000000000(0000) GS:ffff888007a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000d406b60 CR3: 000000000483e000 CR4: 00000000000006f0
Call Trace:
<TASK>
? __warn+0x83/0x130
? unregister_netdevice_many_notify+0x8d9/0x930
? report_bug+0x18e/0x1a0
? handle_bug+0x54/0x90
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? unregister_netdevice_many_notify+0x8d9/0x930
? bond_net_exit_batch_rtnl+0x5c/0x90
cleanup_net+0x237/0x3d0
process_one_work+0x163/0x390
worker_thread+0x293/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0xec/0x1e0
? __pfx_kthread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 9e2ee5c7e7 ("net, bonding: Add XDP support to the bonding driver")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Acked-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250321044852.1086551-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP uses generic skb_set_owner_r() and sock_rfree()
for received packets, with socket lock being owned.
Switch to private versions, avoiding two atomic operations
per packet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250320121604.3342831-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_rcv_core() is using:
__IP6_ADD_STATS(net, idev,
IPSTATS_MIB_NOECTPKTS +
(ipv6_get_dsfield(hdr) & INET_ECN_MASK),
max_t(unsigned short, 1, skb_shinfo(skb)->gso_segs));
This is currently evaluating both expressions twice.
Fix _DEVADD() and _DEVUPD() macros to evaluate their arguments once.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250319212516.2385451-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
include/net/af_unix.h indirectly includes some definitions for structs.
Let's include such headers explicitly.
linux/atomic.h : scm_stat.nr_fds
linux/net.h : unix_sock.peer_wq
linux/path.h : unix_sock.path
linux/spinlock.h : unix_sock.lock
linux/wait.h : unix_sock.peer_wake
uapi/linux/un.h : unix_address.name[]
linux/socket.h is removed as the structs there are not used directly,
and linux/un.h is clarified with uapi as un.h only exists under
include/uapi.
While at it, duplicate headers are removed from .c files.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250318034934.86708-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/af_unix.h is included by core and some LSMs, but most definitions
need not be.
Let's move struct unix_{vertex,edge} to net/unix/garbage.c and other
definitions to net/unix/af_unix.h.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250318034934.86708-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a prep patch to make the following changes cleaner.
No functional change intended.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250318034934.86708-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support adjusting/reading RTO MIN for socket level by using set/getsockopt().
This new option has the same effect as TCP_BPF_RTO_MIN, which means it
doesn't affect RTAX_RTO_MIN usage (by using ip route...). Considering that
bpf option was implemented before this patch, so we need to use a standalone
new option for pure tcp set/getsockopt() use.
When the socket is created, its icsk_rto_min is set to the default
value that is controlled by sysctl_tcp_rto_min_us. Then if application
calls setsockopt() with TCP_RTO_MIN_US flag to pass a valid value, then
icsk_rto_min will be overridden in jiffies unit.
This patch adds WRITE_ONCE/READ_ONCE to avoid data-race around
icsk_rto_min.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250317120314.41404-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently network taps unbound to any interface are linked in the
global ptype_all list, affecting the performance in all the network
namespaces.
Add per netns ptypes chains, so that in the mentioned case only
the netns owning the packet socket(s) is affected.
While at that drop the global ptype_all list: no in kernel user
registers a tap on "any" type without specifying either the target
device or the target namespace (and IMHO doing that would not make
any sense).
Note that this adds a conditional in the fast path (to check for
per netns ptype_specific list) and increases the dataset size by
a cacheline (owing the per netns lists).
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumaze@google.com>
Link: https://patch.msgid.link/ae405f98875ee87f8150c460ad162de7e466f8a7.1742494826.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90sDQAKCRCRxhvAZXjc
ooUnAQCaXv5U0GaEwkCcW78vw/dk7jyFG5LlrGUMvZV8MBSvuAEAsaPvU2uM6ZNf
743B8zOopOeX3Nwy8UKRcHk1nO1m5AY=
=NoZe
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs afs updates from Christian Brauner:
"This contains the work for afs for this cycle:
- Fix an occasional hang that's only really encountered when
rmmod'ing the kafs module
- Remove the "-o autocell" mount option. This is obsolete with the
dynamic root and removing it makes the next patch slightly easier
- Change how the dynamic root mount is constructed. Currently, the
root directory is (de)populated when it is (un)mounted if there are
cells already configured and, further, pairs of automount points
have to be created/removed each time a cell is added/deleted
This is changed so that readdir on the root dir lists all the known
cell automount pairs plus the @cell symlinks and the inodes and
dentries are constructed by lookup on demand. This simplifies the
cell management code
- A few improvements to the afs_volume and afs_server tracepoints
- Pass trace info into the afs_lookup_cell() function to allow the
trace log to indicate the purpose of the lookup
- Remove the 'net' parameter from afs_unuse_cell() as it's
superfluous
- In rxrpc, allow a kernel app (such as kafs) to store a word of
information on rxrpc_peer records
- Use the information stored on the rxrpc_peer record to point to the
afs_server record. This allows the server address lookup to be done
away with
- Simplify the afs_server ref/activity accounting to make each one
self-contained and not garbage collected from the cell management
work item
- Simplify the afs_cell ref/activity accounting to make each one of
these also self-contained and not driven by a central management
work item
The current code was intended to make it such that a single timer
for the namespace and one work item per cell could do all the work
required to maintain these records. This, however, made for some
sequencing problems when cleaning up these records. Further, the
attempt to pass refs along with timers and work items made getting
it right rather tricky when the timer or work item already had a
ref attached and now a ref had to be got rid of"
* tag 'vfs-6.15-rc1.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Simplify cell record handling
afs: Fix afs_server ref accounting
afs: Use the per-peer app data provided by rxrpc
rxrpc: Allow the app to store private data on peer structs
afs: Drop the net parameter from afs_unuse_cell()
afs: Make afs_lookup_cell() take a trace note
afs: Improve server refcount/active count tracing
afs: Improve afs_volume tracing to display a debug ID
afs: Change dynroot to create contents on demand
afs: Remove the "autocell" mount option
inet_connection_sock_af_ops.addr2sockaddr() hasn't been used at all
in the git era.
$ git grep addr2sockaddr $(git rev-list HEAD | tail -n 1)
Let's remove it.
Note that there was a 4 bytes hole after sockaddr_len and now it's
6 bytes, so the binary layout is not changed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250318060112.3729-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a followup of my presentation in Zagreb for netdev 0x19:
icsk_clean_acked is only used by TCP when/if CONFIG_TLS_DEVICE
is enabled from tcp_ack().
Rename it to tcp_clean_acked, move it to tcp_sock structure
in the tcp_sock_read_rx for better cache locality in TCP
fast path.
Define this field only when CONFIG_TLS_DEVICE is enabled
saving 8 bytes on configs not using it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250317085313.2023214-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Binding AX25 socket by using the autobind feature leads to memory leaks
in ax25_connect() and also refcount leaks in ax25_release(). Memory
leak was detected with kmemleak:
================================================================
unreferenced object 0xffff8880253cd680 (size 96):
backtrace:
__kmalloc_node_track_caller_noprof (./include/linux/kmemleak.h:43)
kmemdup_noprof (mm/util.c:136)
ax25_rt_autobind (net/ax25/ax25_route.c:428)
ax25_connect (net/ax25/af_ax25.c:1282)
__sys_connect_file (net/socket.c:2045)
__sys_connect (net/socket.c:2064)
__x64_sys_connect (net/socket.c:2067)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
================================================================
When socket is bound, refcounts must be incremented the way it is done
in ax25_bind() and ax25_setsockopt() (SO_BINDTODEVICE). In case of
autobind, the refcounts are not incremented.
This bug leads to the following issue reported by Syzkaller:
================================================================
ax25_connect(): syz-executor318 uses autobind, please contact jreuter@yaina.de
------------[ cut here ]------------
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 5317 at lib/refcount.c:31 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
Modules linked in:
CPU: 0 UID: 0 PID: 5317 Comm: syz-executor318 Not tainted 6.14.0-rc4-syzkaller-00278-gece144f151ac #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
...
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x6af/0x7e0 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4302 [inline]
netdev_put include/linux/netdevice.h:4319 [inline]
ax25_release+0x368/0x960 net/ax25/af_ax25.c:1080
__sock_release net/socket.c:647 [inline]
sock_close+0xbc/0x240 net/socket.c:1398
__fput+0x3e9/0x9f0 fs/file_table.c:464
__do_sys_close fs/open.c:1580 [inline]
__se_sys_close fs/open.c:1565 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1565
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Considering the issues above and the comments left in the code that say:
"check if we can remove this feature. It is broken."; "autobinding in this
may or may not work"; - it is better to completely remove this feature than
to fix it because it is broken and leads to various kinds of memory bugs.
Now calling connect() without first binding socket will result in an
error (-EINVAL). Userspace software that relies on the autobind feature
might get broken. However, this feature does not seem widely used with
this specific driver as it was not reliable at any point of time, and it
is already broken anyway. E.g. ax25-tools and ax25-apps packages for
popular distributions do not use the autobind feature for AF_AX25.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+33841dc6aa3e1d86b78a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=33841dc6aa3e1d86b78a
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
The void * cast in mctp_cb is unnecessary as it's already been done
at the start of the function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/Z9PwOQeBSYlgZlHq@gondor.apana.org.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace the legacy comperssion interface with the new acomp
interface. This is the first user to make full user of the
asynchronous nature of acomp by plugging into the existing xfrm
resume interface.
As a result of SG support by acomp, the linear scratch buffer
in ipcomp can be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case the fib match is used from the input hook we can avoid the fib
lookup if early demux assigned a socket for us: check that the input
interface matches sk-cached one.
Rework the existing 'lo bypass' logic to first check sk, then
for loopback interface type to elide the fib lookup.
This speeds up fib matching a little, before:
93.08 GBit/s (no rules at all)
75.1 GBit/s ("fib saddr . iif oif missing drop" in prerouting)
75.62 GBit/s ("fib saddr . iif oif missing drop" in input)
After:
92.48 GBit/s (no rules at all)
75.62 GBit/s (fib rule in prerouting)
90.37 GBit/s (fib rule in input).
Numbers for the 'no rules' and 'prerouting' are expected to
closely match in-between runs, the 3rd/input test case exercises the
the 'avoid lookup if cached ifindex in sk matches' case.
Test used iperf3 via veth interface, lo can't be used due to existing
loopback test.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad7 ("selftest: net: add proc_net_pktgen")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711ac ("selftests: net: Add test cases for link and peer netns")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429e ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similarly to net.mptcp.available_schedulers, this patch adds a new one
net.mptcp.available_path_managers to list the available path managers.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-11-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to allow users to develop their own BPF-based path manager,
this patch defines a struct ops "mptcp_pm_ops" for an MPTCP path
manager, which contains a set of interfaces. Currently only init()
and release() interfaces are included, subsequent patches will add
others step by step.
Add a set of functions to register, unregister, find and validate a
given path manager struct ops.
"list" is used to add this path manager to mptcp_pm_list list when
it is registered. "name" is used to identify this path manager.
mptcp_pm_find() uses "name" to find a path manager on the list.
mptcp_pm_unregister is not used in this set, but will be invoked in
.unreg of struct bpf_struct_ops. mptcp_pm_validate() will be invoked
in .validate of struct bpf_struct_ops. That's why they are exported.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-6-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- hci_event: Fix connection regression between LE and non-LE adapters
- Fix error code in chan_alloc_skb_cb()
-----BEGIN PGP SIGNATURE-----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=+VUv
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_event: Fix connection regression between LE and non-LE adapters
- Fix error code in chan_alloc_skb_cb()
* tag 'for-net-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_event: Fix connection regression between LE and non-LE adapters
Bluetooth: Fix error code in chan_alloc_skb_cb()
====================
Link: https://patch.msgid.link/20250314163847.110069-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcp_in_quickack_mode() is called from input path for small packets.
It calls __sk_dst_get() which reads sk->sk_dst_cache which has been
put in sock_read_tx group (for good reasons).
Then dst_metric(dst, RTAX_QUICKACK) also needs extra cache line misses.
Cache RTAX_QUICKACK in icsk->icsk_ack.dst_quick_ack to no longer pull
these cache lines for the cases a delayed ACK is scheduled.
After this patch TCP receive path does not longer access sock_read_tx
group.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250312083907.1931644-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the following patch, we no longer assume inet_frag_kill()
callers own a reference.
Consuming two refcounts from inet_frag_kill() would lead in UAF.
Propagate the pointer to the refs that will be consumed later
by the final inet_frag_putn() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
inet_frag_putn() can release multiple references
in one step.
Use it in inet_frags_free_cb().
Replace inet_frag_put(X) with inet_frag_putn(X, 1)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's quite common to have a single UDP tunnel type active in the
whole system. In such a case we can replace the indirect call for
the UDP tunnel GRO callback with a static call.
Add the related accounting in the control path and switch to static
call when possible. To keep the code simple use a static array for
the registered tunnel types, and size such array based on the kernel
config.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/6fd1f9c7651151493ecab174e7b8386a1534170d.1741718157.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Most UDP tunnels bind a socket to a local port, with ANY address, no
peer and no interface index specified.
Additionally it's quite common to have a single tunnel device per
namespace.
Track in each namespace the UDP tunnel socket respecting the above.
When only a single one is present, store a reference in the netns.
When such reference is not NULL, UDP tunnel GRO lookup just need to
match the incoming packet destination port vs the socket local port.
The tunnel socket never sets the reuse[port] flag[s]. When bound to no
address and interface, no other socket can exist in the same netns
matching the specified local port.
Matching packets with non-local destination addresses will be
aggregated, and eventually segmented as needed - no behavior changes
intended.
Note that the UDP tunnel socket reference is stored into struct
netns_ipv4 for both IPv4 and IPv6 tunnels. That is intentional to keep
all the fastpath-related netns fields in the same struct and allow
cacheline-based optimization. Currently both the IPv4 and IPv6 socket
pointer share the same cacheline as the `udp_table` field.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/4d5c319c4471161829f50cb8436841de81a5edae.1741718157.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to GDMA protocol, holes (zeros) are allowed at the beginning
or middle of the gdma_list_devices_resp message. The existing code
cannot properly handle this, and may miss some devices in the list.
To fix, scan the entire list until the num_of_devs are found, or until
the end of the list.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@microsoft.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741723974-1534-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are a few conflicts between the work that went
into wireless and that's here now, resolve them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Accurate ECN needs to send custom flags to handle IP-ECN
field reflection during handshake.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ECN bits in TOS are always cleared when sending in ACKs in TW. Clearing
them is problematic for TCP flows that used Accurate ECN because ECN bits
decide which service queue the packet is placed into (L4S vs Classic).
Effectively, TW ACKs are always downgraded from L4S to Classic queue
which might impact, e.g., delay the ACK will experience on the path
compared with the other packets of the flow.
Change the TW ACK sending code to differentiate:
- In tcp_v4_send_reset(), commit ba9e04a7dd ("ip: fix tos reflection
in ack and reset packets") cleans ECN bits for TW reset and this is
not affected.
- In tcp_v4_timewait_ack(), ECN bits for all TW ACKs are cleaned. But now
only ECN bits of ACKs for oow data or paws_reject are cleaned, and ECN
bits of other ACKs will not be cleaned.
- In tcp_v4_reqsk_send_ack(), commit 66b13d99d9 ("ipv4: tcp: fix TOS
value in ACK messages sent from TIME_WAIT") did not clean ECN bits of
ACKs for oow data or paws_reject. But now the ECN bits rae cleaned for
these ACKs.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create helpers for TCP ECN modes. No functional changes.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With AccECN, there's one additional TCP flag to be used (AE)
and ACE field that overloads the definition of AE, CWR, and
ECE flags. As tcp_flags was previously only 1 byte, the
byte-order stuff needs to be added to it's handling.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use BIT() macro for TCP flags field and TCP congestion control
flags that will be used by the congestion control algorithm.
No functional changes.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Ilpo Järvinen <ij@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use TYPEOF_UNQUAL() to declare variables as a corresponding type without
named address space qualifier to avoid "`__seg_gs' specified for auto
variable `var'" errors.
Link: https://lkml.kernel.org/r/20250127160709.80604-4-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Nadav Amit <nadav.amit@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Due to a typo during defining HCI errors it is not possible to connect
LE-capable device with BR/EDR only adapter. The connection is terminated
by the LE adapter because the invalid LL params error code is treated
as unsupported remote feature.
Fixes: 79c0868ad6 ("Bluetooth: hci_event: Use HCI error defines instead of magic values")
Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change mana_get_primary_netdev_rcu() to mana_get_primary_netdev(), and
return the ndev with refcount held. The caller is responsible for dropping
the refcount.
Also drop the check for IFF_SLAVE as it is not necessary if the upper
device is present.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1741821332-9392-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
As we move away from rtnl_lock for queue ops, introduce
per-netdev_nl_sock lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No functional changes. Next patches will add more granular locking
to netdev_nl_sock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some regulatory bodies doesn't allow IR (initiate radioation) on a
specific subband, but allows it for channels with a bandwidth of 20 MHz.
Add a channel flag that indicates that, and consider it in
cfg80211_reg_check_beaconing.
While on it, fix the kernel doc of enum nl80211_reg_rule_flags and
change it to use BIT().
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Co-developed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.d3ab352a73ff.I8a8f79e1c9eb74936929463960ee2a324712fe51@changeid
[fix typo]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some extended MLD capabilities and operations bits (currently
the "BTM MLD Recommendataion For Multiple APs Support" bit)
may depend on userspace capabilities. Allow userspace to pass
the values for this field that it supports to the association
and link reconfiguration operations.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20250308225541.bd52078b5f65.I4dd8f53b0030db7ea87a2e0920989e7e2c7b5345@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Provide a way for the application (e.g. the afs filesystem) to store
private data on the rxrpc_peer structs for later retrieval via the call
object.
This will allow afs to store a pointer to the afs_server object on the
rxrpc_peer struct, thereby obviating the need for afs to keep lookup tables
by which it can associate an incoming call with server that transmitted it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-13-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-9-dhowells@redhat.com/ # v4
Move the more esoteric helpers for netdev instance lock to
a dedicated header. This avoids growing netdevice.h to infinity
and makes rebuilding the kernel much faster (after touching
the header with the helpers).
The main netdev_lock() / netdev_unlock() functions are used
in static inlines in netdevice.h and will probably be used
most commonly, so keep them in netdevice.h.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When introduced in commit 61723b3932 ("tcp: ulp: add functions to dump
ulp-specific information"), the whole ULP diag info has been exported
only if the requester had CAP_NET_ADMIN.
It looks like not everything is sensitive, and some info can be exported
to all users in order to ease the debugging from the userspace side
without requiring additional capabilities. Each layer should then decide
what can be exposed to everybody. The 'net_admin' boolean is then passed
to the different layers.
On kTLS side, it looks like there is nothing sensitive there: version,
cipher type, tx/rx user config type, plus some flags. So, only some
metadata about the configuration, no cryptographic info like keys, etc.
Then, everything can be exported to all users.
On MPTCP side, that's different. The MPTCP-related sequence numbers per
subflow should certainly not be exposed to everybody. For example, the
DSS mapping and ssn_offset would give all users on the system access to
narrow ranges of values for the subflow TCP sequence numbers and
MPTCP-level DSNs, and then ease packet injection. The TCP diag interface
doesn't expose the TCP sequence numbers for TCP sockets, so best to do
the same here. The rest -- token, IDs, flags -- can be exported to
everybody.
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250306-net-next-tcp-ulp-diag-net-admin-v1-2-06afdd860fc9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 4d94f05558 which has
problems (see [1]) and is no longer needed since 581dd2dc16
("Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating")
has reworked the code where the original bug has been found.
[1] Link: https://lore.kernel.org/linux-bluetooth/877c55ci1r.wl-tiwai@suse.de/T/#t
Fixes: 4d94f05558 ("Bluetooth: hci_core: Fix sleeping function called from invalid context")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The call to flush_work before tearing down a table from the netlink
notifier was supposed to make sure that all earlier updates (e.g. rule
add) that might reference that table have been processed.
Unfortunately, flush_work() waits for the last queued instance.
This could be an instance that is different from the one that we must
wait for.
This is because transactions are protected with a pernet mutex, but the
work item is global, so holding the transaction mutex doesn't prevent
another netns from queueing more work.
Make the work item pernet so that flush_work() will wait for all
transactions queued from this netns.
A welcome side effect is that we no longer need to wait for transaction
objects from foreign netns.
The gc work queue is still global. This seems to be ok because nft_set
structures are reference counted and each container structure owns a
reference on the net namespace.
The destroy_list is still protected by a global spinlock rather than
pernet one but the hold time is very short anyway.
v2: call cancel_work_sync before reaping the remaining tables (Pablo).
Fixes: 9f6958ba2e ("netfilter: nf_tables: unconditionally flush pending work before notifier")
Reported-by: syzbot+5d8c5789c8cb076b2c25@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
After blamed commit rtm_to_fib_config() now calls
lwtunnel_valid_encap_type{_attr}() without RTNL held,
triggering an unlock balance in __rtnl_unlock,
as reported by syzbot [1]
IPv6 and rtm_to_nh_config() are not yet converted.
Add a temporary @rtnl_is_held parameter to lwtunnel_valid_encap_type()
and lwtunnel_valid_encap_type_attr().
While we are at it replace the two rcu_dereference()
in lwtunnel_valid_encap_type() with more appropriate
rcu_access_pointer().
[1]
syz-executor245/5836 is trying to release lock (rtnl_mutex) at:
[<ffffffff89d0e38c>] __rtnl_unlock+0x6c/0xf0 net/core/rtnetlink.c:142
but there are no more locks to release!
other info that might help us debug this:
no locks held by syz-executor245/5836.
stack backtrace:
CPU: 0 UID: 0 PID: 5836 Comm: syz-executor245 Not tainted 6.14.0-rc4-syzkaller-00873-g3424291dd242 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_unlock_imbalance_bug+0x25b/0x2d0 kernel/locking/lockdep.c:5289
__lock_release kernel/locking/lockdep.c:5518 [inline]
lock_release+0x47e/0xa30 kernel/locking/lockdep.c:5872
__mutex_unlock_slowpath+0xec/0x800 kernel/locking/mutex.c:891
__rtnl_unlock+0x6c/0xf0 net/core/rtnetlink.c:142
lwtunnel_valid_encap_type+0x38a/0x5f0 net/core/lwtunnel.c:169
lwtunnel_valid_encap_type_attr+0x113/0x270 net/core/lwtunnel.c:209
rtm_to_fib_config+0x949/0x14e0 net/ipv4/fib_frontend.c:808
inet_rtm_newroute+0xf6/0x2a0 net/ipv4/fib_frontend.c:917
rtnetlink_rcv_msg+0x791/0xcf0 net/core/rtnetlink.c:6919
netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:709 [inline]
Fixes: 1dd2af7963 ("ipv4: fib: Convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL.")
Reported-by: syzbot+3f18ef0f7df107a3f6a0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67c6f87a.050a0220.38b91b.0147.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250304125918.2763514-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When __inet_hash_connect() has to try many 4-tuples before
finding an available one, we see a high spinlock cost from
the many spin_lock_bh(&head->lock) performed in its loop.
This patch adds an RCU lookup to avoid the spinlock cost.
check_established() gets a new @rcu_lookup argument.
First reason is to not make any changes while head->lock
is not held.
Second reason is to not make this RCU lookup a second time
after the spinlock has been acquired.
Tested:
Server:
ulimit -n 40000; neper/tcp_crr -T 200 -F 30000 -6 --nolog
Client:
ulimit -n 40000; neper/tcp_crr -T 200 -F 30000 -6 --nolog -c -H server
Before series:
utime_start=0.288582
utime_end=1.548707
stime_start=20.637138
stime_end=2002.489845
num_transactions=484453
latency_min=0.156279245
latency_max=20.922042756
latency_mean=1.546521274
latency_stddev=3.936005194
num_samples=312537
throughput=47426.00
perf top on the client:
49.54% [kernel] [k] _raw_spin_lock
25.87% [kernel] [k] _raw_spin_lock_bh
5.97% [kernel] [k] queued_spin_lock_slowpath
5.67% [kernel] [k] __inet_hash_connect
3.53% [kernel] [k] __inet6_check_established
3.48% [kernel] [k] inet6_ehashfn
0.64% [kernel] [k] rcu_all_qs
After this series:
utime_start=0.271607
utime_end=3.847111
stime_start=18.407684
stime_end=1997.485557
num_transactions=1350742
latency_min=0.014131929
latency_max=17.895073144
latency_mean=0.505675853 # Nice reduction of latency metrics
latency_stddev=2.125164772
num_samples=307884
throughput=139866.80 # 190 % increase
perf top on client:
56.86% [kernel] [k] __inet6_check_established
17.96% [kernel] [k] __inet_hash_connect
13.88% [kernel] [k] inet6_ehashfn
2.52% [kernel] [k] rcu_all_qs
2.01% [kernel] [k] __cond_resched
0.41% [kernel] [k] _raw_spin_lock
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250302124237.3913746-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add RCU protection to inet_bind_bucket structure.
- Add rcu_head field to the structure definition.
- Use kfree_rcu() at destroy time, and remove inet_bind_bucket_destroy()
first argument.
- Use hlist_del_rcu() and hlist_add_head_rcu() methods.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250302124237.3913746-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
-----BEGIN PGP SIGNATURE-----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=KYXQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First 6.15 material:
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
* tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits)
wifi: iwlwifi: remove mld/roc.c
wifi: mac80211: refactor populating mesh related fields in sinfo
wifi: cfg80211: reorg sinfo structure elements for mesh
wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"
wifi: iwlwifi: add Debug Host Command APIs
wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro
wifi: iwlwifi: add OMI bandwidth reduction APIs
wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif
wifi: iwlwifi: remember if the UATS table was read successfully
wifi: iwlwifi: export iwl_get_lari_config_bitmap
wifi: iwlwifi: add support for external 32 KHz clock
wifi: iwlwifi: mld: add a debug level for EHT prints
wifi: iwlwifi: mld: add a debug level for PTP prints
wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif
wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid
wifi: iwlwifi: location api cleanup
wifi: cfg80211: expose update timestamp to drivers
wifi: mac80211: add ieee80211_iter_chan_contexts_mtx
wifi: mac80211: fix integer overflow in hwmp_route_info_get()
wifi: mac80211: Fix possible integer promotion issue
...
====================
Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds the sock version of kmemdup() helper, named sock_kmemdup(),
to duplicate the input "src" memory block using the socket's option memory
buffer.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/f828077394c7d1f3560123497348b438c875b510.1740735165.git.tanggeliang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP uses of dev_net() are under RCU protection, change them
to dev_net_rcu() to get LOCKDEP support.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use two existing drop reasons in tcp_check_req():
- TCP_RFC7323_PAWS
- TCP_OVERWINDOW
Add two new ones:
- TCP_RFC7323_TSECR (corresponds to LINUX_MIB_TSECRREJECTED)
- TCP_LISTEN_OVERFLOW (when a listener accept queue is full)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to add new drop reasons for packets dropped in 3WHS in the
following patches.
tcp_rcv_state_process() has to set reason to TCP_FASTOPEN,
because tcp_check_req() will conditionally overwrite the drop_reason.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL.
Then, we need to have per-netns hash tables for struct fib_info.
Let's allocate the hash tables per netns.
fib_info_hash, fib_info_hash_bits, and fib_info_cnt are now moved
to struct netns_ipv4 and accessed with net->ipv4.fib_XXX.
Also, the netns checks are removed from fib_find_info_nh() and
fib_find_info().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250228042328.96624-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will allocate fib_info_hash[] and fib_info_laddrhash[] for each netns.
Currently, fib_info_hash[] is allocated when the first route is added.
Let's move the first allocation to a new __net_init function.
Note that we must call fib4_semantics_exit() in fib_net_exit_batch()
because ->exit() is called earlier than ->exit_batch().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250228042328.96624-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, as multi-link operation(MLO) is not supported for mesh,
reorganize the sinfo structure for mesh-specific fields and embed
mesh related NL attributes together in organized view.
This will allow for the simplified reorganization of sinfo structure
for link level in a subsequent patch to add support for MLO station
statistics.
No functionality changes added.
Pahole summary before the reorg of sinfo structure:
- size: 256, cachelines: 4, members: 50
- sum members: 239, holes: 4, sum holes: 17
- paddings: 2, sum paddings: 2
- forced alignments: 1, forced holes: 1, sum forced holes: 1
Pahole summary after the reorg of sinfo structure:
- size: 248, cachelines: 4, members: 50
- sum members: 239, holes: 4, sum holes: 9
- paddings: 2, sum paddings: 2
- forced alignments: 1, last cacheline: 56 bytes
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250213171632.1646538-2-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
this week, so next week's PR is probably going to be bigger. A healthy
dose of fixes for bugs introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net()
RDMA driver register notifier after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue
with LED support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=+Ci7
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
The only user was veth, which now uses napi_skb_cache_get_bulk().
It's now preferred over a direct allocation and is exported as
well, so remove this one.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make GRO init and cleanup functions global to be able to use GRO
without a NAPI instance. Taking into account already global gro_flush(),
it's now fully usable standalone.
New functions are not exported, since they're not supposed to be used
outside of the kernel core code.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In fact, these two are not tied closely to each other. The only
requirements to GRO are to use it in the BH context and have some
sane limits on the packet batches, e.g. NAPI has a limit of its
budget (64/8/etc.).
Move purely GRO fields into a new structure, &gro_node. Embed it
into &napi_struct and adjust all the references.
gro_node::cached_napi_id is effectively the same as
napi_struct::napi_id, but to be used on GRO hotpath to mark skbs.
napi_struct::napi_id is now a fully control path field.
Three Ethernet drivers use napi_gro_flush() not really meant to be
exported, so move it to <net/gro.h> and add that include there.
napi_gro_receive() is used in more than 100 drivers, keep it
in <linux/netdevice.h>.
This does not make GRO ready to use outside of the NAPI context
yet.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This information is exposed to userspace but not drivers. Make this
field public so that drivers are also able to access it. The information
is for example useful for link selection to determine whether the BSS
corresponding to an MLO link has been seen in a recent scan.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212082137.b682ee7aebc8.I0f7cca9effa2b1cee79f4f2eb8b549c99b4e0571@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is merge of shared branch between RDMA and net-next trees.
* mlx5-next: (550 commits)
net/mlx5: Change POOL_NEXT_SIZE define value and make it global
net/mlx5: Add new health syndrome error and crr bit offset
Linux 6.14-rc3
...
Signed-off-by: Leon Romanovsky <leon@kernel.org>
get_retrans() interface of the burst packet scheduler invokes a sleeping
function mptcp_pm_subflow_chk_stale(), which calls __lock_sock_fast().
So get_retrans() interface should be set with BPF_F_SLEEPABLE flag in
BPF. But get_send() interface of this scheduler can't be set with
BPF_F_SLEEPABLE flag since it's invoked in ack_update_msk() under mptcp
data lock.
So this patch has to split get_subflow() interface of packet scheduer into
two interfaces: get_send() and get_retrans(). Then we can set get_retrans()
interface alone with BPF_F_SLEEPABLE flag.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-8-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCZ7ffOQAKCRAraS+Z+3y5
EzVHAP9h/QkeYoOZW9gul08I8vFiZsFe/lbOSLJWxeVfxb9JhgD/cMqby3qAxQK6
lsdNQ9jYG2232Wym89ag7fvTBK15Wg4=
=gkN2
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-02-20
We've added 19 non-merge commits during the last 8 day(s) which contain
a total of 35 files changed, 1126 insertions(+), 53 deletions(-).
The main changes are:
1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing
2) Add network TX timestamping support to BPF sock_ops, from Jason Xing
3) Add TX metadata Launch Time support, from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
igc: Add launch time support to XDP ZC
igc: Refactor empty frame insertion for launch time support
net: stmmac: Add launch time support to XDP ZC
selftests/bpf: Add launch time request to xdp_hw_metadata
xsk: Add launch time hardware offload support to XDP Tx metadata
selftests/bpf: Add simple bpf tests in the tx path for timestamping feature
bpf: Support selective sampling for bpf timestamping
bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback
net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING
bpf: Disable unsafe helpers in TX timestamping callbacks
bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback
bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping
bpf: Add networking timestamping support to bpf_get/setsockopt()
selftests/bpf: Add rto max for bpf_setsockopt test
bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt
====================
Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that devices have been converted to use the specific netns instead
of ambiguous "net", let's remove it from newlink parameters.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-11-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When link_net is set, use it as link netns instead of dev_net(). This
prepares for rtnetlink core to create device in target netns directly,
in which case the two namespaces may be different.
Convert common ip_tunnel_newlink() to accept an extra link netns
argument.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-7-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two helper functions - rtnl_newlink_link_net() and
rtnl_newlink_peer_net() for netns fallback logic. Peer netns falls back
to link netns, and link netns falls back to source netns.
Convert the use of params->net in netdevice drivers to one of the helper
functions for clarity.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-4-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are 4 net namespaces involved when creating links:
- source netns - where the netlink socket resides,
- target netns - where to put the device being created,
- link netns - netns associated with the device (backend),
- peer netns - netns of peer device.
Currently, two nets are passed to newlink() callback - "src_net"
parameter and "dev_net" (implicitly in net_device). They are set as
follows, depending on netlink attributes in the request.
+------------+-------------------+---------+---------+
| peer netns | IFLA_LINK_NETNSID | src_net | dev_net |
+------------+-------------------+---------+---------+
| | absent | source | target |
| absent +-------------------+---------+---------+
| | present | link | link |
+------------+-------------------+---------+---------+
| | absent | peer | target |
| present +-------------------+---------+---------+
| | present | peer | link |
+------------+-------------------+---------+---------+
When IFLA_LINK_NETNSID is present, the device is created in link netns
first and then moved to target netns. This has some side effects,
including extra ifindex allocation, ifname validation and link events.
These could be avoided if we create it in target netns from
the beginning.
On the other hand, the meaning of src_net parameter is ambiguous. It
varies depending on how parameters are passed. It is the effective
link (or peer netns) by design, but some drivers ignore it and use
dev_net instead.
To provide more netns context for drivers, this patch packs existing
newlink() parameters, along with the source netns, link netns and peer
netns, into a struct. The old "src_net" is renamed to "net" to avoid
confusion with real source netns, and will be deprecated later. The use
of src_net are converted to params->net trivially.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In tunnel mode, for the packet offload, there were no PMTU signaling
to the upper level about need to fragment the packet. As a solution,
call to already existing xfrm[4|6]_tunnel_check_size() to perform that.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
SA replay mode is initialized differently for user-space and
kernel-space users, but the call to xfrm_init_replay() existed in
common path with boolean protection. That caused to situation where
we have two different function orders.
So let's rewrite the SA initialization flow to have same order for
both in-kernel and user-space callers.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
XFRM offload path is probed even if offload isn't needed at all. Let's
make sure that x->type_offload pointer stays NULL for such path to
reduce ambiguity.
Fixes: 9d389d7f84 ("xfrm: Add a xfrm type offload.")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
- Fix a soft-lockup in BPF arena_map_free on 64k page size
kernels (Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding
kfree_skb to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's
freeze_mutex (Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when
eth_skb_pkt_type is accessing skb data not containing an
Ethernet header (Shigeru Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch
(Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2)
in user space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ7evlRUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIPwHgD/dTvM00Ck4Q73fPivyT7tcqxeXJlD
D6ggzWl/SG9LAbwA/2/cSgAM9Jm1g7ddvn/S9QaDYOs5GmFl6urq6krs+tYD
=FCs9
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
Extend the XDP Tx metadata framework so that user can requests launch time
hardware offload, where the Ethernet device will schedule the packet for
transmission at a pre-determined time called launch time. The value of
launch time is communicated from user space to Ethernet driver via
launch_time field of struct xsk_tx_metadata.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250216093430.957880-2-yoong.siang.song@intel.com
Support the ACK case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_ACK_CB. This
callback will occur at the same timestamping point as the user
space's SCM_TSTAMP_ACK. The BPF program can use it to get the
same SCM_TSTAMP_ACK timestamp without modifying the user-space
application.
This patch extends txstamp_ack to two bits: 1 stands for
SO_TIMESTAMPING mode, 2 bpf extension.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-10-kerneljasonxing@gmail.com
The subsequent patch will implement BPF TX timestamping. It will
call the sockops BPF program without holding the sock lock.
This breaks the current assumption that all sock ops programs will
hold the sock lock. The sock's fields of the uapi's bpf_sock_ops
requires this assumption.
To address this, a new "u8 is_locked_tcp_sock;" field is added. This
patch sets it in the current sock_ops callbacks. The "is_fullsock"
test is then replaced by the "is_locked_tcp_sock" test during
sock_ops_convert_ctx_access().
The new TX timestamping callbacks added in the subsequent patch will
not have this set. This will prevent unsafe access from the new
timestamping callbacks.
Potentially, we could allow read-only access. However, this would
require identifying which callback is read-safe-only and also requires
additional BPF instruction rewrites in the covert_ctx. Since the BPF
program can always read everything from a socket (e.g., by using
bpf_core_cast), this patch keeps it simple and disables all read
and write access to any socket fields through the bpf_sock_ops
UAPI from the new TX timestamping callback.
Moreover, note that some of the fields in bpf_sock_ops are specific
to tcp_sock, and sock_ops currently only supports tcp_sock. In
the future, UDP timestamping will be added, which will also break
this assumption. The same idea used in this patch will be reused.
Considering that the current sock_ops only supports tcp_sock, the
variable is named is_locked_"tcp"_sock.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250220072940.99994-4-kerneljasonxing@gmail.com
This patch introduces a new bpf_skops_tx_timestamping() function
that prepares the "struct bpf_sock_ops" ctx and then executes the
sockops BPF program.
The subsequent patch will utilize bpf_skops_tx_timestamping() at
the existing TX timestamping kernel callbacks (__sk_tstamp_tx
specifically) to call the sockops BPF program. Later, four callback
points to report information to user space based on this patch will
be introduced.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250220072940.99994-3-kerneljasonxing@gmail.com
The new SK_BPF_CB_FLAGS and new SK_BPF_CB_TX_TIMESTAMPING are
added to bpf_get/setsockopt. The later patches will implement the
BPF networking timestamping. The BPF program will use
bpf_setsockopt(SK_BPF_CB_FLAGS, SK_BPF_CB_TX_TIMESTAMPING) to
enable the BPF networking timestamping on a socket.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-2-kerneljasonxing@gmail.com
Remove the hidden assumption that options are allocated at the end of
the struct, and teach the compiler about them using a flexible array.
With this, we can revert the unsafe_memcpy() call we have in
tun_dst_unclone() [1], and resolve the false field-spanning write
warning caused by the memcpy() in ip_tunnel_info_opts_set().
The layout of struct ip_tunnel_info remains the same with this patch.
Before this patch, there was an implicit padding at the end of the
struct, options would be written at 'info + 1' which is after the
padding.
This will remain the same as this patch explicitly aligns 'options'.
The alignment is needed as the options are later casted to different
structs, and might result in unaligned memory access.
Pahole output before this patch:
struct ip_tunnel_info {
struct ip_tunnel_key key; /* 0 64 */
/* XXX last struct has 1 byte of padding */
/* --- cacheline 1 boundary (64 bytes) --- */
struct ip_tunnel_encap encap; /* 64 8 */
struct dst_cache dst_cache; /* 72 16 */
u8 options_len; /* 88 1 */
u8 mode; /* 89 1 */
/* size: 96, cachelines: 2, members: 5 */
/* padding: 6 */
/* paddings: 1, sum paddings: 1 */
/* last cacheline: 32 bytes */
};
Pahole output after this patch:
struct ip_tunnel_info {
struct ip_tunnel_key key; /* 0 64 */
/* XXX last struct has 1 byte of padding */
/* --- cacheline 1 boundary (64 bytes) --- */
struct ip_tunnel_encap encap; /* 64 8 */
struct dst_cache dst_cache; /* 72 16 */
u8 options_len; /* 88 1 */
u8 mode; /* 89 1 */
/* XXX 6 bytes hole, try to pack */
u8 options[] __attribute__((__aligned__(16))); /* 96 0 */
/* size: 96, cachelines: 2, members: 6 */
/* sum members: 90, holes: 1, sum holes: 6 */
/* paddings: 1, sum paddings: 1 */
/* forced alignments: 1, forced holes: 1, sum forced holes: 6 */
/* last cacheline: 32 bytes */
} __attribute__((__aligned__(16)));
[1] Commit 13cfd6a6d7 ("net: Silence false field-spanning write warning in metadata_dst memcpy")
Link: https://lore.kernel.org/all/53D1D353-B8F6-4ADC-8F29-8C48A7C9C6F1@kernel.org/
Suggested-by: Kees Cook <kees@kernel.org>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250219143256.370277-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tunnel options should not be accessed directly, use the ip_tunnel_info()
accessor instead.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250219143256.370277-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabrina reported the following splat:
WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0
Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48
RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e
RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6
RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c
R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168
R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007
FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
gro_cells_init+0x1ba/0x270
xfrm_input_init+0x4b/0x2a0
xfrm_init+0x38/0x50
ip_rt_init+0x2d7/0x350
ip_init+0xf/0x20
inet_init+0x406/0x590
do_one_initcall+0x9d/0x2e0
do_initcalls+0x23b/0x280
kernel_init_freeable+0x445/0x490
kernel_init+0x20/0x1d0
ret_from_fork+0x46/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 584330
hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0
hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0
softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470
softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0
on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024)
is smaller than GRO_MAX_HEAD.
Such built additionally contains the revert of the single page frag cache
so that napi_get_frags() ends up using the page frag allocator, triggering
the splat.
Note that the underlying issue is independent from the mentioned
revert; address it ensuring that the small head cache will fit either TCP
and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb()
to select kmalloc() usage for any allocation fitting such cache.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: 3948b05950 ("net: introduce a config option to tweak MAX_SKB_FRAGS")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while
running tests that boil down to:
- create a pair of netns
- run a basic TCP test over ipcomp6
- delete the pair of netns
The xfrm_state found on spi_byaddr was not deleted at the time we
delete the netns, because we still have a reference on it. This
lingering reference comes from a secpath (which holds a ref on the
xfrm_state), which is still attached to an skb. This skb is not
leaked, it ends up on sk_receive_queue and then gets defer-free'd by
skb_attempt_defer_free.
The problem happens when we defer freeing an skb (push it on one CPU's
defer_list), and don't flush that list before the netns is deleted. In
that case, we still have a reference on the xfrm_state that we don't
expect at this point.
We already drop the skb's dst in the TCP receive path when it's no
longer needed, so let's also drop the secpath. At this point,
tcp_filter has already called into the LSM hooks that may require the
secpath, so it should not be needed anymore. However, in some of those
places, the MPTCP extension has just been attached to the skb, so we
cannot simply drop all extensions.
Fixes: 68822bdf76 ("net: generalize skb freeing deferral to per-cpu lists")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/5055ba8f8f72bdcb602faa299faca73c280b7735.1739743613.git.sd@queasysnail.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After the previous patch we can remove the forward_alloc_get
proto callback, basically reverting commit 292e6077b0 ("net: introduce
sk_forward_alloc_get()") and commit 66d58f046c ("net: use
sk_forward_alloc_get() in sk_get_meminfo()").
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-5-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend IPv4 FIB rules to match on source and destination ports using a
mask. Note that the mask is only set when not matching on a range.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for configuring and deleting rules that match on source and
destination ports using a mask as well as support for dumping such rules
to user space.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This initializes tclass and dontfrag before cmsg parsing, removing the
need for explicit checks against -1 in each caller.
Leave hlimit set to -1, because its full initialization
(in ip6_sk_dst_hoplimit) requires more state (dst, flowi6, ..).
This also prepares for calling sockcm_init in a follow-on patch.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-7-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initialize the ip cookie tos field when initializing the cookie, in
ipcm_init_sk.
The existing code inverts the standard pattern for initializing cookie
fields. Default is to initialize the field from the sk, then possibly
overwrite that when parsing cmsgs (the unlikely case).
This field inverts that, setting the field to an illegal value and
after cmsg parsing checking whether the value is still illegal and
thus should be overridden.
Be careful to always apply mask INET_DSCP_MASK, as before.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-5-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid open coding initialization of sockcm fields.
Avoid reading the sk_priority field twice.
This ensures all callers, existing and future, will correctly try a
cmsg passed mark before sk_mark.
This patch extends support for cmsg mark to:
packet_spkt and packet_tpacket and net/can/raw.c.
This patch extends support for cmsg priority to:
packet_spkt and packet_tpacket.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice, iavf: Add support for Rx timestamping
Mateusz Polchlopek says:
Initially, during VF creation it registers the PTP clock in
the system and negotiates with PF it's capabilities. In the
meantime the PF enables the Flexible Descriptor for VF.
Only this type of descriptor allows to receive Rx timestamps.
Enabling virtual clock would be possible, though it would probably
perform poorly due to the lack of direct time access.
Enable timestamping should be done using userspace tools, e.g.
hwstamp_ctl -i $VF -r 14
In order to report the timestamps to userspace, the VF extends
timestamp to 40b.
To support this feature the flexible descriptors and PTP part
in iavf driver have been introduced.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: add support for Rx timestamps to hotpath
iavf: handle set and get timestamps ops
iavf: Implement checking DD desc field
iavf: refactor iavf_clean_rx_irq to support legacy and flex descriptors
iavf: define Rx descriptors as qwords
libeth: move idpf_rx_csum_decoded and idpf_rx_extracted
iavf: periodically cache PHC time
iavf: add support for indirect access to PHC time
iavf: add initial framework for registering PTP clock
iavf: negotiate PTP capabilities
iavf: add support for negotiating flexible RXDID format
virtchnl: add enumeration for the rxdid format
ice: support Rx timestamp on flex descriptor
virtchnl: add support for enabling PTP on iAVF
====================
Link: https://patch.msgid.link/20250214192739.1175740-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Creating empty nests is helpful when the exact attributes to be exposed
in the future are not known. Encapsulate the logic in a helper.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 6597e8d358 ("netdev-genl: Elide napi_id when not present"),
napi_id_valid function was added. Use the helper to refactor open-coded
checks in the source.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Stefano Jordhani <sjordhani@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk> # for iouring
Link: https://patch.msgid.link/20250214181801.931-1-sjordhani@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have many EXPORT_SYMBOL(x) in networking tree because IPv6
can be built as a module.
CONFIG_IPV6=y is becoming the norm.
Define a EXPORT_IPV6_MOD(x) which only exports x
for modular IPv6.
Same principle applies to EXPORT_IPV6_MOD_GPL()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250212132418.1524422-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Structs idpf_rx_csum_decoded and idpf_rx_extracted are used both in
idpf and iavf Intel drivers. Change the prefix from idpf_* to libeth_*
and move mentioned structs to libeth's rx.h header file.
Adjust usage in idpf driver.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After commit 5d4cc87414 ("net: reorganize "struct sock" fields"),
the sk_tsflags field shares the same cacheline with sk_forward_alloc.
The UDP protocol does not acquire the sock lock in the RX path;
forward allocations are protected via the receive queue spinlock;
additionally udp_recvmsg() calls sock_recv_cmsgs() unconditionally
touching sk_tsflags on each packet reception.
Due to the above, under high packet rate traffic, when the BH and the
user-space process run on different CPUs, UDP packet reception
experiences a cache miss while accessing sk_tsflags.
The receive path doesn't strictly need to access the problematic field;
change sock_set_timestamping() to maintain the relevant information
in a newly allocated sk_flags bit, so that sock_recv_cmsgs() can
take decisions accessing the latter field only.
With this patch applied, on an AMD epic server with i40e NICs, I
measured a 10% performance improvement for small packets UDP flood
performance tests - possibly a larger delta could be observed with more
recent H/W.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/dbd18c8a1171549f8249ac5a8b30b1b5ec88a425.1739294057.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 13c7c941e7 ("netdev: add qstat for csum complete") reserved
the entry for csum complete in the qstats uAPI. Start reporting this
value now that we have a driver which needs it.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250211181356.580800-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous patch added a TCP_RTO_MAX_MS socket option
to tune a TCP socket max RTO value.
Many setups prefer to change a per netns sysctl.
This patch adds /proc/sys/net/ipv4/tcp_rto_max_ms
Its initial value is 120000 (120 seconds).
Keep in mind that a decrease of tcp_rto_max_ms
means shorter overall timeouts, unless tcp_retries2
sysctl is increased.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, TCP stack uses a constant (120 seconds)
to limit the RTO value exponential growth.
Some applications want to set a lower value.
Add TCP_RTO_MAX_MS socket option to set a value (in ms)
between 1 and 120 seconds.
It is discouraged to change the socket rto max on a live
socket, as it might lead to unexpected disconnects.
Following patch is adding a netns sysctl to control the
default value at socket creation time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We want to factorize calls to inet_csk_reset_xmit_timer(),
to ease TCP_RTO_MAX change.
Current users want to add tcp_pacing_delay(sk)
to the timeout.
Remaining calls to inet_csk_reset_xmit_timer()
do not add the pacing delay. Following patch
will convert them, passing false for @pace_delay.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All callers use TCP_RTO_MAX, we can factorize this constant,
becoming a variable soon.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This will be used by the low level driver.
Note that link_id will be 0 in case of a non-MLO authentication.
Also fix a call-site of mgd_prepare_tx() where the link_id was not
populated.
Update the documentation to reflect the current state
ieee80211_prep_tx_info::link_id is also available in mgd_complete_tx().
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.6a590f189ce5.I1fc5c0da26b143f5b07191eb592f01f7083d55ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a strict mode where we disable certain workarounds and have
additional checks such as, for now, that VHT capabilities from
association response match those from beacon/probe response. We
can extend the checks in the future.
Make it an opt-in setting by the driver so it can be set there
in some driver-specific way, for example. Also allow setting
this one hw flag through the hwflags debugfs, by writing a new
strict=0 or strict=1 value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.5cecb0469479.I4a69617dc60ba0d6308416ffbc3102cfd08ba068@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for configuring EPCS state:
- When EPCS is enabled, send an EPCS enable request action frame
to the AP. When the AP replies with EPCS enable response, enable
EPCS by applying the QoS parameters provided by the AP. Do so for
all the valid MLD links. Once EPCS is enabled, support processing
of unsolicited EPCS enable response frames.
- When EPCS is disabled, send an EPCS teardown request to the AP
and apply the QoS parameters as obtained from the last received
beacons. Do so for all the valid links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.7a90afd7e140.I3f602d65f5c1fd849d6c70b12307dda33aa91ccb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Hostapd switched from cooked monitor interfaces to nl80211 Dec 2011.
Drop support for the outdated cooked monitor interfaces and fix
creating the virtual monitor interfaces in the following cases:
1) We have one non-monitor and one monitor interface with
%MONITOR_FLAG_ACTIVE enabled and then delete the non-monitor
interface.
2) We only have monitor interfaces enabled on resume while at least one
has %MONITOR_FLAG_ACTIVE set.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204111352.7004-2-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Unconditionally start to refuse creating cooked monitor interfaces to
phase them out.
There is no feature flag for drivers to opt-in for cooked monitor and
all known users are using/preferring the modern API since the hostapd
release 1.0 in May 2012.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204111352.7004-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
fib_nl_newrule() / fib_nl_delrule() is the doit() handler for
RTM_NEWRULE / RTM_DELRULE but also called from vrf_newlink().
Currently, we hold RTNL on both paths but will not on the former.
Also, we set dev_net(dev)->rtnl to skb->sk in vrf_fib_rule() because
fib_nl_newrule() / fib_nl_delrule() fetch net as sock_net(skb->sk).
Let's Factorise the two functions and pass net and rtnl_held flag.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
l3mdev_l3_out() can be called without RCU being held:
raw_sendmsg()
ip_push_pending_frames()
ip_send_skb()
ip_local_out()
__ip_local_out()
l3mdev_ip_out()
Add rcu_read_lock() / rcu_read_unlock() pair to avoid
a potential UAF.
Fixes: a8e3e1a9f0 ("net: l3mdev: Add hook to output path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when your driver supports XSk Tx metadata and you want to
send an XSk frame, you need to do the following:
* call external xsk_buff_raw_get_dma();
* call inline xsk_buff_get_metadata(), which calls external
xsk_buff_raw_get_data() and then do some inline checks.
This effectively means that the following piece:
addr = pool->unaligned ? xp_unaligned_add_offset_to_addr(addr) : addr;
is done twice per frame, plus you have 2 external calls per frame, plus
this:
meta = pool->addrs + addr - pool->tx_metadata_len;
if (unlikely(!xsk_buff_valid_tx_metadata(meta)))
is always inlined, even if there's no meta or it's invalid.
Add xsk_buff_raw_get_ctx() (xp_raw_get_ctx() to be precise) to do that
in one go. It returns a small structure with 2 fields: DMA address,
filled unconditionally, and metadata pointer, non-NULL only if it's
present and valid. The address correction is performed only once and
you also have only 1 external call per XSk frame, which does all the
calculations and checks outside of your hotpath. You only need to
check `if (ctx.meta)` for the metadata presence.
To not copy any existing code, derive address correction and getting
virtual and DMA address into small helpers. bloat-o-meter reports no
object code changes for the existing functionality.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250206182630.3914318-5-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the Castagnoli CRC32 is now always just crc32c(), rename
__crc32c_le_combine() and __crc32c_le_shift() accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
For historical reasons, the Castagnoli CRC32 is available under 3 names:
crc32c(), crc32c_le(), and __crc32c_le(). Most callers use crc32c().
The more verbose versions are not really warranted; there is no "_be"
version that the "_le" version needs to be differentiated from, and the
leading underscores are pointless.
Therefore, let's standardize on just crc32c(). Remove the other two
names, and update callers accordingly.
Specifically, the new crc32c() comes from what was previously
__crc32c_le(), so compared to the old crc32c() it now takes a size_t
length rather than unsigned int, and it's now in linux/crc32.h instead
of just linux/crc32c.h (which includes linux/crc32.h).
Later patches will also rename __crc32c_le_combine(), crc32c_le_base(),
and crc32c_le_arch().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
We seem to be missing a netif_running() check from the devmem
installation path. Starting a queue on a stopped device makes
no sense. We still want to be able to allocate the memory, just
to test that the device is indeed setting up the page pools
in a memory provider compatible way.
This is not a bug fix, because existing drivers check if
the interface is down as part of the ops. But new drivers
shouldn't have to do this, as long as they can correctly
alloc/free while down.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250206225638.1387810-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
inet_csk_delete_keepalive_timer() and inet_csk_reset_keepalive_timer()
are only used from core TCP, there is no need to export them.
Replace their prefix by tcp.
Move them to net/ipv4/tcp_timer.c and make tcp_delete_keepalive_timer()
static.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250206094605.2694118-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are at least two cases where napi_id may not present and the
napi_id should be elided:
1. Queues could be created, but napi_enable may not have been called
yet. In this case, there may be a NAPI but it may not have an ID and
output of a napi_id should be elided.
2. TX-only NAPIs currently do not have NAPI IDs. If a TX queue happens
to be linked with a TX-only NAPI, elide the NAPI ID from the netlink
output as a NAPI ID of 0 is not useful for users.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205193751.297211-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Wei says:
====================
io_uring zero copy rx
This patchset contains net/ patches needed by a new io_uring request
implementing zero copy rx into userspace pages, eliminating a kernel
to user copy.
We configure a page pool that a driver uses to fill a hw rx queue to
hand out user pages instead of kernel pages. Any data that ends up
hitting this hw rx queue will thus be dma'd into userspace memory
directly, without needing to be bounced through kernel memory. 'Reading'
data out of a socket instead becomes a _notification_ mechanism, where
the kernel tells userspace where the data is. The overall approach is
similar to the devmem TCP proposal.
This relies on hw header/data split, flow steering and RSS to ensure
packet headers remain in kernel memory and only desired flows hit a hw
rx queue configured for zero copy. Configuring this is outside of the
scope of this patchset.
We share netdev core infra with devmem TCP. The main difference is that
io_uring is used for the uAPI and the lifetime of all objects are bound
to an io_uring instance. Data is 'read' using a new io_uring request
type. When done, data is returned via a new shared refill queue. A zero
copy page pool refills a hw rx queue from this refill queue directly. Of
course, the lifetime of these data buffers are managed by io_uring
rather than the networking stack, with different refcounting rules.
This patchset is the first step adding basic zero copy support. We will
extend this iteratively with new features e.g. dynamically allocated
zero copy areas, THP support, dmabuf support, improved copy fallback,
general optimisations and more.
In terms of netdev support, we're first targeting Broadcom bnxt. Patches
aren't included since Taehee Yoo has already sent a more comprehensive
patchset adding support in [1]. Google gve should already support this,
and Mellanox mlx5 support is WIP pending driver changes.
===========
Performance
===========
Note: Comparison with epoll + TCP_ZEROCOPY_RECEIVE isn't done yet.
Test setup:
* AMD EPYC 9454
* Broadcom BCM957508 200G
* Kernel v6.11 base [2]
* liburing fork [3]
* kperf fork [4]
* 4K MTU
* Single TCP flow
With application thread + net rx softirq pinned to _different_ cores:
+-------------------------------+
| epoll | io_uring |
|-----------|-------------------|
| 82.2 Gbps | 116.2 Gbps (+41%) |
+-------------------------------+
Pinned to _same_ core:
+-------------------------------+
| epoll | io_uring |
|-----------|-------------------|
| 62.6 Gbps | 80.9 Gbps (+29%) |
+-------------------------------+
=====
Links
=====
Broadcom bnxt support:
[1]: https://lore.kernel.org/20241003160620.1521626-8-ap420073@gmail.com
Linux kernel branch including io_uring bits:
[2]: https://github.com/isilence/linux.git zcrx/v13
liburing for testing:
[3]: https://github.com/isilence/liburing.git zcrx/next
kperf for testing:
[4]: https://git.kernel.dk/kperf.git
====================
Link: https://patch.msgid.link/20250204215622.695511-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helpers that properly prep or remove a memory provider for an rx
queue then restart the queue.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-11-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helpers for memory providers to interact with page pools.
net_mp_niov_{set,clear}_page_pool() serve to [dis]associate a net_iov
with a page pool. If used, the memory provider is responsible to match
"set" calls with "clear" once a net_iov is not going to be used by a page
pool anymore, changing a page pool, etc.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-10-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devmem TCP needs a hook in unregister_netdevice_many_notify() to upkeep
the set tracking queues it's bound to, i.e. ->bound_rxqs. Instead of
devmem sticking directly out of the genetic path, add a mp function.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-8-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a mandatory callback that prints information about the memory
provider to netlink.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-7-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A spin off from the original page pool memory providers patch by Jakub,
which allows extending page pools with custom allocators. One of such
providers is devmem TCP, and the other is io_uring zerocopy added in
following patches.
Link: https://lore.kernel.org/netdev/20230707183935.997267-7-kuba@kernel.org/
Co-developed-by: Jakub Kicinski <kuba@kernel.org> # initial mp proposal
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-5-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently net_iov stores a pointer to struct dmabuf_genpool_chunk_owner,
which serves as a useful abstraction to share data and provide a
context. However, it's too devmem specific, and we want to reuse it for
other memory providers, and for that we need to decouple net_iov from
devmem. Make net_iov to point to a new base structure called
net_iov_area, which dmabuf_genpool_chunk_owner extends.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_dst_mtu_maybe_forward() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: f87c10a8aa ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip4_dst_hoplimit() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: fa50d974d1 ("ipv4: Namespaceify ip_default_ttl sysctl knob")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev->nd_net can change, readers should either
use rcu_read_lock() or RTNL.
We currently use a generic helper, dev_net() with
no debugging support. We probably have many hidden bugs.
Add dev_net_rcu() helper for callers using rcu_read_lock()
protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the mana_ib_gd_query_adapter_caps function to retrieve and store
the feature_flags from the firmware response.
Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1738751713-16169-2-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In case of tc offload, when user space queries the kernel for tc action
statistics, tc will query the offloaded statistics from device drivers.
Among other statistics, drivers are expected to pass the number of
packets that hit the action since the last query as a 64-bit number.
Unfortunately, tc treats the number of packets as a 32-bit number,
leading to truncation and incorrect statistics when the number of
packets since the last query exceeds 0xffffffff:
$ tc -s filter show dev swp2 ingress
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
skip_sw
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device swp1) stolen
index 1 ref 1 bind 1 installed 58 sec used 0 sec
Action statistics:
Sent 1133877034176 bytes 536959475 pkt (dropped 0, overlimits 0 requeues 0)
[...]
According to the above, 2111-byte packets were redirected which is
impossible as only 64-byte packets were transmitted and the MTU was
1500.
Fix by treating packets as a 64-bit number:
$ tc -s filter show dev swp2 ingress
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
skip_sw
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device swp1) stolen
index 1 ref 1 bind 1 installed 61 sec used 0 sec
Action statistics:
Sent 1370624380864 bytes 21416005951 pkt (dropped 0, overlimits 0 requeues 0)
[...]
Which shows that only 64-byte packets were redirected (1370624380864 /
21416005951 = 64).
Fixes: 3804070235 ("net/sched: Enable netdev drivers to update statistics of offloaded actions")
Reported-by: Joe Botha <joe@atomic.ac>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250204123839.1151804-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rx/tx queues embed their own kobject for registering their per-queue
sysfs files. The issue is they're using the kobject default groups for
this and entirely rely on the kobject refcounting for releasing their
sysfs paths.
In order to remove rtnl_trylock calls we need sysfs files not to rely on
their associated kobject refcounting for their release. Thus we here
move queues sysfs files from the kobject default groups to their own
groups which can be removed separately.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-3-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement allocation of DMA-mapped memory regions.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-3-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allow the HW to register DMA-mapped memory for kernel-level PDs.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-2-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
'sk->copied_seq' was updated in the tcp_eat_skb() function when the action
of a BPF program was SK_REDIRECT. For other actions, like SK_PASS, the
update logic for 'sk->copied_seq' was moved to tcp_bpf_recvmsg_parser()
to ensure the accuracy of the 'fionread' feature.
It works for a single stream_verdict scenario, as it also modified
sk_data_ready->sk_psock_verdict_data_ready->tcp_read_skb
to remove updating 'sk->copied_seq'.
However, for programs where both stream_parser and stream_verdict are
active (strparser purpose), tcp_read_sock() was used instead of
tcp_read_skb() (sk_data_ready->strp_data_ready->tcp_read_sock).
tcp_read_sock() now still updates 'sk->copied_seq', leading to duplicate
updates.
In summary, for strparser + SK_PASS, copied_seq is redundantly calculated
in both tcp_read_sock() and tcp_bpf_recvmsg_parser().
The issue causes incorrect copied_seq calculations, which prevent
correct data reads from the recv() interface in user-land.
We do not want to add new proto_ops to implement a new version of
tcp_read_sock, as this would introduce code complexity [1].
We could have added noack and copied_seq to desc, and then called
ops->read_sock. However, unfortunately, other modules didn’t fully
initialize desc to zero. So, for now, we are directly calling
tcp_read_sock_noack() in tcp_bpf.c.
[1]: https://lore.kernel.org/bpf/20241218053408.437295-1-mrpre@163.com
Fixes: e5c6de5fa0 ("bpf, sockmap: Incorrectly handling copied_seq")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-3-mrpre@163.com
Added a new read_sock handler, allowing users to customize read operations
instead of relying on the native socket's read_sock.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-2-mrpre@163.com
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH7ZpcWbFyOOp6OJbrB3Eaf9PW7cFAmeXIF4ACgkQrB3Eaf9P
W7fRMA/+Js2x0HNA3+6SMb5nJzY6lywi1BIRAzstyfd6EsxbHlgfdWYCCpixboA0
/ZfDe7yPND/ewPIQLT9eO6hk9YzuAVhYUkdIcDC5jdFDNbh9dDqBdyu5P/5spsi9
9SdFEucoOsKBP4ejmSvtwGsVNIf/1vB8hFqYxB+vh8+d/g8PHrI3xxk+2b7KkIGS
ms+IyDCoVdCGQUOp4BGtEQbzXtx67diH5dcfwg8/DJpSMbfqO3ZFRG7gPu8C5Igt
cxVSCW67rv/zzPkGPv8B+nczAdVUZ3OFXgEWxdDCN/mUbFKwxUcIDxZVJMfBBAUP
lcjsbzmNfj2PNMLZFe/5LuU6o+sFEZdxmTPmvbb+lSYrRHx2oz2/Jb871gEj8rTC
vNZ+1Lu1k7QRjEPiO1fe85vWdmU4G81+WAzC88nD0KYLDUN4c+MmxUFQkKbAxf6p
e6VCihcKqi5Sa6R73Ohm87iyiSuv8WvkyVSM0XgQrkXWDFy5Jp2Bo25pW0QgVxK+
l/aHhDA+YHFEOZTcjZsh/EdKlQRIxBNJ3ualITkjd2T+A1WyWm0A3S+kYZQCKqiM
WGGWM3oVNXkUAaRxvURNvmXqO+hPeKfIElDeVrOUjG8zQ+EktKcg4KpDQb2BGJCj
s9ksFj0pplR4GHxUrFmkEPxJWYKpFqUYCZMJDnBnHFm1ykC7QGM=
=pg+h
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-01-27
1) Fix incrementing the upper 32 bit sequence numbers for GSO skbs.
From Jianbo Liu.
2) Fix an out-of-bounds read on xfrm state lookup.
From Florian Westphal.
3) Fix secpath handling on packet offload mode.
From Alexandre Cassen.
4) Fix the usage of skb->sk in the xfrm layer.
5) Don't disable preemption while looking up cache state
to fix PREEMPT_RT.
From Sebastian Sewior.
* tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Don't disable preemption while looking up cache state.
xfrm: Fix the usage of skb->sk
xfrm: delete intermediate secpath entry in packet offload mode
xfrm: state: fix out-of-bounds read during lookup
xfrm: replay: Fix the update of replay_esn->oseq_hi for GSO
====================
Link: https://patch.msgid.link/20250127060757.3946314-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Page ppol tried to cache the NAPI ID in page pool info to avoid
having a dependency on the life cycle of the NAPI instance.
Since commit under Fixes the NAPI ID is not populated until
napi_enable() and there's a good chance that page pool is
created before NAPI gets enabled.
Protect the NAPI pointer with the existing page pool mutex,
the reading path already holds it. napi_id itself we need
to READ_ONCE(), it's protected by netdev_lock() which are
not holding in page pool.
Before this patch napi IDs were missing for mlx5:
# ./cli.py --spec netlink/specs/netdev.yaml --dump page-pool-get
[{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912},
{'id': 143, 'ifindex': 2, 'inflight': 5568, 'inflight-mem': 22806528},
{'id': 142, 'ifindex': 2, 'inflight': 5120, 'inflight-mem': 20971520},
{'id': 141, 'ifindex': 2, 'inflight': 4992, 'inflight-mem': 20447232},
...
After:
[{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912,
'napi-id': 565},
{'id': 143, 'ifindex': 2, 'inflight': 4224, 'inflight-mem': 17301504,
'napi-id': 525},
{'id': 142, 'ifindex': 2, 'inflight': 4288, 'inflight-mem': 17563648,
'napi-id': 524},
...
Fixes: 86e25f40aa ("net: napi: Add napi_config")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250123231620.1086401-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core
----
- More core refactoring to reduce the RTNL lock contention,
including preparatory work for the per-network namespace RTNL lock,
replacing RTNL lock with a per device-one to protect NAPI-related
net device data and moving synchronize_net() calls outside such
lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and
more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter
---------
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on
each restart.
Protocols
---------
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets,
to avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel
TLS (for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API
----------
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling
-----------------
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec,
to ease maintenance and future development.
- Add YNL support for decoding the link types used in net
self-tests, allowing a single build to run both net and
drivers/net.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues, affecting
both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station mode
support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hrsp
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
-----BEGIN PGP SIGNATURE-----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=fgyr
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Improved handling of LSM "secctx" strings through lsm_context struct
The LSM secctx string interface is from an older time when only one
LSM was supported, migrate over to the lsm_context struct to better
support the different LSMs we now have and make it easier to support
new LSMs in the future.
These changes explain the Rust, VFS, and networking changes in the
diffstat.
- Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are
enabled
Small tweak to be a bit smarter about when we build the LSM's common
audit helpers.
- Check for absurdly large policies from userspace in SafeSetID
SafeSetID policies rules are fairly small, basically just "UID:UID",
it easy to impose a limit of KMALLOC_MAX_SIZE on policy writes which
helps quiet a number of syzbot related issues. While work is being
done to address the syzbot issues through other mechanisms, this is a
trivial and relatively safe fix that we can do now.
- Various minor improvements and cleanups
A collection of improvements to the kernel selftests, constification
of some function parameters, removing redundant assignments, and
local variable renames to improve readability.
* tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: initialize local array before use to quiet static analysis
safesetid: check size of policy writes
net: corrections for security_secid_to_secctx returns
lsm: rename variable to avoid shadowing
lsm: constify function parameters
security: remove redundant assignment to return variable
lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set
selftests: refactor the lsm `flags_overset_lsm_set_self_attr` test
binder: initialize lsm_context structure
rust: replace lsm context+len with lsm_context
lsm: secctx provider check on release
lsm: lsm_context in security_dentry_init_security
lsm: use lsm_context in security_inode_getsecctx
lsm: replace context+len with lsm_context
lsm: ensure the correct LSM context releaser
We will convert rtnl_lock() with rtnl_net_lock(), and we want to
convert __in6_dev_get() too.
__in6_dev_get() uses rcu_dereference_rtnl(), but as written in its
comment, rtnl_dereference() or rcu_dereference() is preferable.
Let's add __in6_dev_get_rtnl_net() that uses rtnl_net_dereference().
We can add the RCU version helper later if needed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AASc
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
1) Unbreak set size settings for rbtree set backend, intervals in
rbtree are represented as two elements, this detailed is leaked
to userspace leading to bogus ENOSPC from control plane.
2) Remove dead code in br_netfilter's br_nf_pre_routing_finish()
due to never matching error when looking up for route,
from Antoine Tenart.
3) Simplify check for device already in use in flowtable,
from Phil Sutter.
4) Three patches to restore interface name field in struct nft_hook
and use it, this is to prepare for wildcard interface support.
From Phil Sutter.
5) Do not remove netdev basechain when last device is gone, this is
for consistency with the flowtable behaviour. This allows for netdev
basechains without devices. Another patch to simplify netdev event
notifier after this update. Also from Phil.
6) Two patches to add missing spinlock when flowtable updates TCP
state flags, from Florian Westphal.
7) Simplify __nf_ct_refresh_acct() by removing skbuff parameter,
also from Florian.
8) Flowtable gc now extends ct timeout for offloaded flow. This
is to address a possible race that leads to handing over flow
to classic path with long ct timeouts.
9) Tear down flow if cached rt_mtu is stale, before this patch,
packet is handed over to classic path but flow entry still remained
in place.
10) Revisit the flowtable teardown strategy, which was originally
designed to release flowtable hardware entries early. Add a new
CLOSING flag that still allows hardware to release entries when
fin/rst is seen, but keeps the flow entry in place when the
TCP connection is closed. Release flow after timeout or when a new
syn packet is seen for TCP reopen scenario.
* tag 'nf-next-25-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: flowtable: add CLOSING state
netfilter: flowtable: teardown flow if cached mtu is stale
netfilter: conntrack: rework offload nf_conn timeout extension logic
netfilter: conntrack: remove skb argument from nf_ct_refresh
netfilter: nft_flow_offload: update tcp state flags under lock
netfilter: nft_flow_offload: clear tcp MAXACK flag before moving to slowpath
netfilter: nf_tables: Simplify chain netdev notifier
netfilter: nf_tables: Tolerate chains with no remaining hooks
netfilter: nf_tables: Compare netdev hooks based on stored name
netfilter: nf_tables: Use stored ifname in netdev hook dumps
netfilter: nf_tables: Store user-defined hook ifname
netfilter: nf_tables: Flowtable hook's pf value never varies
netfilter: br_netfilter: remove unused conditional and dead code
netfilter: nf_tables: fix set size with rbtree backend
====================
Link: https://patch.msgid.link/20250119172051.8261-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate the HDS config from the ethtool state struct.
The HDS config contains just simple parameters, not state.
Having it as a separate struct will make it easier to clone / copy
and also long term potentially make it per-queue.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
unix_dgram_disconnected() is called from two places:
1. when a connect()ed socket dis-connect()s or re-connect()s to
another socket
2. when sendmsg() fails because the peer socket that the client
has connect()ed to has been close()d
Then, the client's recv queue is purged to remove all messages from
the old peer socket.
Let's define a new drop reason for that case.
# echo 1 > /sys/kernel/tracing/events/skb/kfree_skb/enable
# python3
>>> from socket import *
>>>
>>> # s1 has a message from s2
>>> s1, s2 = socketpair(AF_UNIX, SOCK_DGRAM)
>>> s2.send(b'hello world')
>>>
>>> # re-connect() drops the message from s2
>>> s3 = socket(AF_UNIX, SOCK_DGRAM)
>>> s3.bind('')
>>> s1.connect(s3.getsockname())
# cat /sys/kernel/tracing/trace_pipe
python3-250 ... kfree_skb: ... location=skb_queue_purge_reason+0xdc/0x110 reason: UNIX_DISCONNECT
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AF_UNIX SOCK_STREAM socket supports MSG_OOB.
When OOB data is sent to a socket, recv() will break at that point.
If the next recv() does not have MSG_OOB, the normal data following
the OOB data is returned.
Then, the OOB skb is dropped.
Let's define a new drop reason for that case in manage_oob().
# echo 1 > /sys/kernel/tracing/events/skb/kfree_skb/enable
# python3
>>> from socket import *
>>> s1, s2 = socketpair(AF_UNIX)
>>> s1.send(b'a', MSG_OOB)
>>> s1.send(b'b')
>>> s2.recv(2)
b'b'
# cat /sys/kernel/tracing/trace_pipe
...
python3-223 ... kfree_skb: ... location=unix_stream_read_generic+0x59e/0xc20 reason: UNIX_SKIP_OOB
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
unix_release_sock() is called when the last refcnt of struct file
is released.
Let's define a new drop reason SKB_DROP_REASON_SOCKET_CLOSE and
set it for kfree_skb() in unix_release_sock().
# echo 1 > /sys/kernel/tracing/events/skb/kfree_skb/enable
# python3
>>> from socket import *
>>> s1, s2 = socketpair(AF_UNIX)
>>> s1.send(b'hello world')
>>> s2.close()
# cat /sys/kernel/tracing/trace_pipe
...
python3-280 ... kfree_skb: ... protocol=0 location=unix_release_sock+0x260/0x420 reason: SOCKET_CLOSE
To be precise, unix_release_sock() is also called for a new child
socket in unix_stream_connect() when something fails, but the new
sk does not have skb in the recv queue then and no event is logged.
Note that only tcp_inbound_ao_hash() uses a similar drop reason,
SKB_DROP_REASON_TCP_CLOSE, and this can be generalised later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following patch adds a new drop reason starting with
the SOCKET_ prefix.
Let's gather the existing SOCKET_ reasons.
Note that the order is not part of uAPI.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change resolves warning produced by sparse tool as currently
there is a mismatch between normal generic type in salt and endian
annotated type in macsec driver code. Endian annotated types should
be used here.
Sparse output:
warning: restricted ssci_t degrades to integer
warning: incorrect type in assignment (different base types)
expected restricted ssci_t [usertype] ssci
got unsigned int
warning: restricted __be64 degrades to integer
warning: incorrect type in assignment (different base types)
expected restricted __be64 [usertype] pn
got unsigned long long
Signed-off-by: Ales Nezbeda <anezbeda@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch addresses issues with filter counting in block (tcf_block),
particularly for software bypass scenarios, by introducing a more
accurate mechanism using useswcnt.
Previously, filtercnt and skipswcnt were introduced by:
Commit 2081fd3445 ("net: sched: cls_api: add filter counter") and
Commit f631ef39d8 ("net: sched: cls_api: add skip_sw counter")
filtercnt tracked all tp (tcf_proto) objects added to a block, and
skipswcnt counted tp objects with the skipsw attribute set.
The problem is: a single tp can contain multiple filters, some with skipsw
and others without. The current implementation fails in the case:
When the first filter in a tp has skipsw, both skipswcnt and filtercnt
are incremented, then adding a second filter without skipsw to the same
tp does not modify these counters because tp->counted is already set.
This results in bypass software behavior based solely on skipswcnt
equaling filtercnt, even when the block includes filters without
skipsw. Consequently, filters without skipsw are inadvertently bypassed.
To address this, the patch introduces useswcnt in block to explicitly count
tp objects containing at least one filter without skipsw. Key changes
include:
Whenever a filter without skipsw is added, its tp is marked with usesw
and counted in useswcnt. tc_run() now uses useswcnt to determine software
bypass, eliminating reliance on filtercnt and skipswcnt.
This refined approach prevents software bypass for blocks containing
mixed filters, ensuring correct behavior in tc_run().
Additionally, as atomic operations on useswcnt ensure thread safety and
tp->lock guards access to tp->usesw and tp->counted, the broader lock
down_write(&block->cb_lock) is no longer required in tc_new_tfilter(),
and this resolves a performance regression caused by the filter counting
mechanism during parallel filter insertions.
The improvement can be demonstrated using the following script:
# cat insert_tc_rules.sh
tc qdisc add dev ens1f0np0 ingress
for i in $(seq 16); do
taskset -c $i tc -b rules_$i.txt &
done
wait
Each of rules_$i.txt files above includes 100000 tc filter rules to a
mlx5 driver NIC ens1f0np0.
Without this patch:
# time sh insert_tc_rules.sh
real 0m50.780s
user 0m23.556s
sys 4m13.032s
With this patch:
# time sh insert_tc_rules.sh
real 0m17.718s
user 0m7.807s
sys 3m45.050s
Fixes: 047f340b36 ("net: sched: make skip_sw actually skip software")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp rst/fin packet triggers an immediate teardown of the flow which
results in sending flows back to the classic forwarding path.
This behaviour was introduced by:
da5984e510 ("netfilter: nf_flow_table: add support for sending flows back to the slow path")
b6f27d322a ("netfilter: nf_flow_table: tear down TCP flows if RST or FIN was seen")
whose goal is to expedite removal of flow entries from the hardware
table. Before these patches, the flow was released after the flow entry
timed out.
However, this approach leads to packet races when restoring the
conntrack state as well as late flow re-offload situations when the TCP
connection is ending.
This patch adds a new CLOSING state that is is entered when tcp rst/fin
packet is seen. This allows for an early removal of the flow entry from
the hardware table. But the flow entry still remains in software, so tcp
packets to shut down the flow are not sent back to slow path.
If syn packet is seen from this new CLOSING state, then this flow enters
teardown state, ct state is set to TCP_CONNTRACK_CLOSE state and packet
is sent to slow path, so this TCP reopen scenario can be handled by
conntrack. TCP_CONNTRACK_CLOSE provides a small timeout that aims at
quickly releasing this stale entry from the conntrack table.
Moreover, skip hardware re-offload from flowtable software packet if the
flow is in CLOSING state.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Offload nf_conn entries may not see traffic for a very long time.
To prevent incorrect 'ct is stale' checks during nf_conntrack table
lookup, the gc worker extends the timeout nf_conn entries marked for
offload to a large value.
The existing logic suffers from a few problems.
Garbage collection runs without locks, its unlikely but possible
that @ct is removed right after the 'offload' bit test.
In that case, the timeout of a new/reallocated nf_conn entry will
be increased.
Prevent this by obtaining a reference count on the ct object and
re-check of the confirmed and offload bits.
If those are not set, the ct is being removed, skip the timeout
extension in this case.
Parallel teardown is also problematic:
cpu1 cpu2
gc_worker
calls flow_offload_teardown()
tests OFFLOAD bit, set
clear OFFLOAD bit
ct->timeout is repaired (e.g. set to timeout[UDP_CT_REPLIED])
nf_ct_offload_timeout() called
expire value is fetched
<INTERRUPT>
-> NF_CT_DAY timeout for flow that isn't offloaded
(and might not see any further packets).
Use cmpxchg: if ct->timeout was repaired after the 2nd 'offload bit' test
passed, then ct->timeout will only be updated of ct->timeout was not
altered in between.
As we already have a gc worker for flowtable entries, ct->timeout repair
can be handled from the flowtable gc worker.
This avoids having flowtable specific logic in the conntrack core
and avoids checking entries that were never offloaded.
This allows to remove the nf_ct_offload_timeout helper.
Its safe to use in the add case, but not on teardown.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its not used (and could be NULL), so remove it.
This allows to use nf_ct_refresh in places where we don't have
an skb without having to double-check that skb == NULL would be safe.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Do not drop a netdev-family chain if the last interface it is registered
for vanishes. Users dumping and storing the ruleset upon shutdown to
restore it upon next boot may otherwise lose the chain and all contained
rules. They will still lose the list of devices, a later patch will fix
that. For now, this aligns the event handler's behaviour with that for
flowtables.
The controversal situation at netns exit should be no problem here:
event handler will unregister the hooks, core nftables cleanup code will
drop the chain itself.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Prepare for hooks with NULL ops.dev pointer (due to non-existent device)
and store the interface name and length as specified by the user upon
creation. No functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The existing rbtree implementation uses singleton elements to represent
ranges, however, userspace provides a set size according to the number
of ranges in the set.
Adjust provided userspace set size to the number of singleton elements
in the kernel by multiplying the range by two.
Check if the no-match all-zero element is already in the set, in such
case release one slot in the set size.
Fixes: 0ed6389c48 ("netfilter: nf_tables: rename set implementations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmeKvq8RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtJ3wf/bMRrED1k1xtC117yxBthXOZj7Ae0MG3s
cqIDBZ2MSmi596jfmc/FRFTN6Rie7+WQg8MGhpWpJt4WyvCd+IqmluLwuJGg3oHz
KdDQHN766cPb50mykTBY0m+Uh9eqyhaoozzK+KbrJZNLUt/Ri3DOdPInWP/ODKuT
uo9xv25zmOMQuUJlhOlFpOW68y6isuMsnPpgTvbtjndw3nPe+tVIfGPdg3xeQnq1
SG05wmOeJ8obmO1VsnmHPN20F5PfS5t2asu12UafR7KTiJOdP2QXKGNTy+ag7fQ/
9Sq6SzuPpbHHJJ93f0aJOkTUKdQVmk2xfCYNOyPNu1ewLqiVlvnkew==
=Vu+D
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Integrate with the standard infrastructure for reporting hardware packet
timestamping statistics.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- core: avoid CFI problems with sock priv helpers
- xsk: bring back busy polling support
- netpoll: ensure skb_pool list is always initialized
Current release - new code bugs:
- core: make page_pool_ref_netmem work with net iovs
- ipv4: route: fix drop reason being overridden in ip_route_input_slow
- udp: make rehash4 independent in udp_lib_rehash()
Previous releases - regressions:
- bpf: fix bpf_sk_select_reuseport() memory leak
- openvswitch: fix lockup on tx to unregistering netdev with carrier
- mptcp: be sure to send ack when mptcp-level window re-opens
- eth: bnxt: always recalculate features after XDP clearing, fix null-deref
- eth: mlx5: fix sub-function add port error handling
- eth: fec: handle page_pool_dev_alloc_pages error
Previous releases - always broken:
- vsock: some fixes due to transport de-assignment
- eth: ice: fix E825 initialization
- eth: mlx5e: fix inversion dependency warning while enabling IPsec tunnel
- eth: gtp: destroy device along with udp socket's netns dismantle.
- eth: xilinx: axienet: Fix IRQ coalescing packet count overflow
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=EtnO
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Notably this includes fixes for a few regressions spotted very
recently. No known outstanding ones.
Current release - regressions:
- core: avoid CFI problems with sock priv helpers
- xsk: bring back busy polling support
- netpoll: ensure skb_pool list is always initialized
Current release - new code bugs:
- core: make page_pool_ref_netmem work with net iovs
- ipv4: route: fix drop reason being overridden in
ip_route_input_slow
- udp: make rehash4 independent in udp_lib_rehash()
Previous releases - regressions:
- bpf: fix bpf_sk_select_reuseport() memory leak
- openvswitch: fix lockup on tx to unregistering netdev with carrier
- mptcp: be sure to send ack when mptcp-level window re-opens
- eth:
- bnxt: always recalculate features after XDP clearing, fix
null-deref
- mlx5: fix sub-function add port error handling
- fec: handle page_pool_dev_alloc_pages error
Previous releases - always broken:
- vsock: some fixes due to transport de-assignment
- eth:
- ice: fix E825 initialization
- mlx5e: fix inversion dependency warning while enabling IPsec
tunnel
- gtp: destroy device along with udp socket's netns dismantle.
- xilinx: axienet: Fix IRQ coalescing packet count overflow"
* tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netdev: avoid CFI problems with sock priv helpers
net/mlx5e: Always start IPsec sequence number from 1
net/mlx5e: Rely on reqid in IPsec tunnel mode
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
net/mlx5: Clear port select structure when fail to create
net/mlx5: SF, Fix add port error handling
net/mlx5: Fix a lockdep warning as part of the write combining test
net/mlx5: Fix RDMA TX steering prio
net: make page_pool_ref_netmem work with net iovs
net: ethernet: xgbe: re-add aneg to supported features in PHY quirks
net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII
net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband
selftests: net: Adapt ethtool mq tests to fix in qdisc graft
net: fec: handle page_pool_dev_alloc_pages error
net: netpoll: ensure skb_pool list is always initialized
net: xilinx: axienet: Fix IRQ coalescing packet count overflow
nfp: bpf: prevent integer overflow in nfp_bpf_event_output()
selftests: mptcp: avoid spurious errors on disconnect
mptcp: fix spurious wake-up on under memory pressure
mptcp: be sure to send ack when mptcp-level window re-opens
...
cleanup_net() is the single thread responsible
for netns dismantles, and a serious bottleneck.
Before we can get per-netns RTNL, make sure
all synchronize_net() called from this thread
are using rcu_synchronize_expedited().
v3: deal with CONFIG_NET_NS=n
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Link: https://patch.msgid.link/20250114205531.967841-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
page_pool_ref_netmem() should work with either netmem representation, but
currently it casts to a page with netmem_to_page(), which will fail with
net iovs. Use netmem_get_pp_ref_count_ref() instead.
Fixes: 8ab79ed50c ("page_pool: devmem support")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/20250108220644.3528845-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hdev->reset is never used now and the hdev->cmd_timeout actually
does reset. This patch changes the call path from
hdev->cmd_timeout -> vendor_cmd_timeout -> btusb_reset -> hdev->reset
, to
hdev->reset -> vendor_reset -> btusb_reset
Which makes it clear when we export the hdev->reset to a wider usage
e.g. allowing reset from sysfs.
This patch doesn't introduce any behavior change.
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_bdaddr_list_del_with_flags() was added in 2020's
commit 8baaa4038e ("Bluetooth: Add bdaddr_list_with_flags for classic
whitelist")
but has remained unused.
hci_remove_ext_adv_instance() was added in 2020's
commit eca0ae4aea ("Bluetooth: Add initial implementation of BIS
connections")
but has remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This marks LL Privacy as stable by removing its experimental UUID and
move its functionality to Device Flag (HCI_CONN_FLAG_ADDRESS_RESOLUTION)
which can be set by MGMT Device Set Flags so userspace retain control of
the feature.
Link: https://github.com/bluez/bluez/issues/1028
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Prior patch in the series added TCP_RFC7323_PAWS_ACK drop reason.
This patch adds the corresponding SNMP counter, for folks
using nstat instead of tracing for TCP diagnostics.
nstat -az | grep PAWSOldAck
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250113135558.3180360-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XPS can cause reorders because of the relaxed OOO
conditions for pure ACK packets.
For hosts not using RFS, what can happpen is that ACK
packets are sent on behalf of the cpu processing NIC
interrupts, selecting TX queue A for ACK packet P1.
Then a subsequent sendmsg() can run on another cpu.
TX queue selection uses the socket hash and can choose
another queue B for packets P2 (with payload).
If queue A is more congested than queue B,
the ACK packet P1 could be sent on the wire after
P2.
A linux receiver when processing P1 (after P2) currently increments
LINUX_MIB_PAWSESTABREJECTED (TcpExtPAWSEstab)
and use TCP_RFC7323_PAWS drop reason.
It might also send a DUPACK if not rate limited.
In order to better understand this pattern, this
patch adds a new drop_reason : TCP_RFC7323_PAWS_ACK.
For old ACKS like these, we no longer increment
LINUX_MIB_PAWSESTABREJECTED and no longer sends a DUPACK,
keeping credit for other more interesting DUPACK.
perf record -e skb:kfree_skb -a
perf script
...
swapper 0 [148] 27475.438637: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438706: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438908: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439010: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439214: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.439286: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
...
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250113135558.3180360-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6jpN
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains a small batch of Netfilter/IPVS updates
for net-next:
1) Remove unused genmask parameter in nf_tables_addchain()
2) Speed up reads from /proc/net/ip_vs_conn, from Florian Westphal.
3) Skip empty buckets in hashlimit to avoid atomic operations that results
in false positive reports by syzbot with lockdep enabled, patch from
Eric Dumazet.
4) Add conntrack event timestamps available via ctnetlink,
from Florian Westphal.
netfilter pull request 25-01-11
* tag 'nf-next-25-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: conntrack: add conntrack event timestamp
netfilter: xt_hashlimit: htable_selective_cleanup() optimization
ipvs: speed up reads from ip_vs_conn proc file
netfilter: nf_tables: remove the genmask parameter
====================
Link: https://patch.msgid.link/20250111230800.67349-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When in non-MLO mode, the key ID was set to -1 even for keys that are
not pairwise. Change the link ID to be the link ID of the deflink in
this case so that drivers do not need to special cases for this.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.0c066f084677.I4a5c288465e75119edb6a0df90dddf6f30d14a02@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for configuring Emergency Preparedness Communication
Services (EPCS) for station mode.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.ea54ac94445c.I11d750188bc0871e13e86146a3b5cc048d853e69@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the SAE_H2E selector already exists, which needs to be
implemented by the SME. As new such selectors might be added in the
future, add a feature to permit userspace to report a selector as
supported.
If not given, the kernel should assume that userspace does support
SAE_H2E.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.fe67b871cc39.Ieb98390328927e998e612345a58b6dbc00b0e3a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to save power, it can be desirable to change the
RX operating mode using OMI to reduce the bandwidth. As the
handshake must be done in the HTC+ field, it cannot be done
by mac80211 directly, so expose functions to the driver to
request and finalize the necessary updates.
Note that RX OMI really only changes what the peer (AP) will
transmit to us, but in order to use it to actually save some
power (by reducing the listen bandwidth) we also update rate
scaling and then the channel context's mindef accordingly.
The updates are split into two in order to sequence them
correctly, when reducing bandwidth first reduce the rate
scaling and thus TX, then send OMI, then reduce the listen
bandwidth (chandef); when increasing bandwidth this is the
other way around. This also requires tracking in different
variables which part is applicable already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.2c1a1934bd73.I4e90fd503504e37f9eac5bdae62e3f07e7071275@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the sequence goes like this (among others):
1. flush all stations (including the AP ones) -> this will tell the
drivers to remove the stations
2. notify the driver the vif is not associated.
Which means that in between 1 and 2, the state is that the vif is
associated, but there is no AP station, which makes no sense, and may be
problematic for some drivers (for example iwlwifi)
Change the sequence to:
1. flush the TDLS stations
2. move the AP station to IEEE80211_STA_NONE
3. notify the driver about the vif being unassociated
4. flush the AP station
In order to not break other drivers, add a vif flag to indicate whether
the driver wants to new sequence or not. If the flag is not set, then
things will be done in the old sequence.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241224192322.996ad1be6cb3.I7815d33415aa1d65c0120b54be7a15a45388f807@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 86e25f40aa ("net: napi: Add napi_config") moved napi->napi_id
assignment to a later point in time (napi_hash_add_with_id). This breaks
__xdp_rxq_info_reg which copies napi_id at an earlier time and now
stores 0 napi_id. It also makes sk_mark_napi_id_once_xdp and
__sk_mark_napi_id_once useless because they now work against 0 napi_id.
Since sk_busy_loop requires valid napi_id to busy-poll on, there is no way
to busy-poll AF_XDP sockets anymore.
Bring back the ability to busy-poll on XSK by resolving socket's napi_id
at bind time. This relies on relatively recent netif_queue_set_napi,
but (assume) at this point most popular drivers should have been converted.
This also removes per-tx/rx cycles which used to check and/or set
the napi_id value.
Confirmed by running a busy-polling AF_XDP socket
(github.com/fomichev/xskrtt) on mlx5 and looking at BusyPollRxPackets
from /proc/net/netstat.
Fixes: 86e25f40aa ("net: napi: Add napi_config")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250109003436.2829560-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ4EhtAAKCRCRxhvAZXjc
orToAQCIKKS7fk9j8CUSAdRG5mMy7Q++8OEVA+gyyMWuXnBPYwD/ehy+1xBVjCcI
FBzLadaJSuygjZVCzhVXsE0oRf4A2wg=
=waDA
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"afs:
- Fix the maximum cell name length
- Fix merge preference rule failure condition
fuse:
- Fix fuse_get_user_pages() so it doesn't risk misleading the caller
to think pages have been allocated when they actually haven't
- Fix direct-io folio offset and length calculation
netfs:
- Fix async direct-io handling
- Fix read-retry for filesystems that don't provide a
->prepare_read() method
vfs:
- Prevent truncating 64-bit offsets to 32-bits in iomap
- Fix memory barrier interactions when polling
- Remove MNT_ONRB to fix concurrent modification of @mnt->mnt_flags
leading to MNT_ONRB to not be raised and invalid access to a list
member"
* tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
poll: kill poll_does_not_wait()
sock_poll_wait: kill the no longer necessary barrier after poll_wait()
io_uring_poll: kill the no longer necessary barrier after poll_wait()
poll_wait: kill the obsolete wait_address check
poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll()
afs: Fix merge preference rule failure condition
netfs: Fix read-retry for fs with no ->prepare_read()
netfs: Fix kernel async DIO
fs: kill MNT_ONRB
iomap: avoid avoid truncating 64-bit offset to 32 bits
afs: Fix the maximum cell name length
fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure
fuse: fix direct io folio offset and length calculation
Now that poll_wait() provides a full barrier we can remove smp_mb() from
sock_poll_wait().
Also, the poll_does_not_wait() check before poll_wait() just adds the
unnecessary confusion, kill it. poll_wait() does the same "p && p->_qproc"
check.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250107162736.GA18944@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----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=U79q
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2025-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-2025-01-09
1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality.
From Christian Hopps.
2) Support ESN context update to hardware for TX.
From Jianbo Liu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nadia Pinaeva writes:
I am working on a tool that allows collecting network performance
metrics by using conntrack events.
Start time of a conntrack entry is used to evaluate seen_reply
latency, therefore the sooner it is timestamped, the better the
precision is.
In particular, when using this tool to compare the performance of the
same feature implemented using iptables/nftables/OVS it is crucial
to have the entry timestamped earlier to see any difference.
At this time, conntrack events can only get timestamped at recv time in
userspace, so there can be some delay between the event being generated
and the userspace process consuming the message.
There is sys/net/netfilter/nf_conntrack_timestamp, which adds a
64bit timestamp (ns resolution) that records start and stop times,
but its not suited for this either, start time is the 'hashtable insertion
time', not 'conntrack allocation time'.
There is concern that moving the start-time moment to conntrack
allocation will add overhead in case of flooding, where conntrack
entries are allocated and released right away without getting inserted
into the hashtable.
Also, even if this was changed it would not with events other than
new (start time) and destroy (stop time).
Pablo suggested to add new CTA_TIMESTAMP_EVENT, this adds this feature.
The timestamp is recorded in case both events are requested and the
sys/net/netfilter/nf_conntrack_timestamp toggle is enabled.
Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com>
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This change introduces a mechanism for notifying userspace
applications about changes to IPv6 anycast addresses via netlink. It
includes:
* Addition and deletion of IPv6 anycast addresses are reported using
RTM_NEWANYCAST and RTM_DELANYCAST.
* A new netlink group (RTNLGRP_IPV6_ACADDR) for subscribing to these
notifications.
This enables user space applications(e.g. ip monitor) to efficiently
track anycast addresses through netlink messages, improving metrics
collection and system monitoring. It also unlocks the potential for
advanced anycast management in user space, such as hardware offload
control and fine grained network control.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250107114355.1766086-1-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The get_mac_eee() is no longer called by the core DSA code, nor are
there any implementations of this method. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUllU-007UzL-KV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define inet_sk_dscp() to get a dscp_t value from struct inet_sock, so
that sctp_v4_get_dst() can easily set ->flowi4_tos from a dscp_t
variable. For the SCTP_DSCP_SET_MASK case, we can just use
inet_dsfield_to_dscp() to get a dscp_t value.
Then, when converting ->flowi4_tos from __u8 to dscp_t, we'll just have
to drop the inet_dscp_to_dsfield() conversion function.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/1a645f4a0bc60ad18e7c0916642883ce8a43c013.1735835456.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the backlog of listen() is set to zero, sk_acceptq_is_full() allows
one connection to be made, but inet_csk_reqsk_queue_is_full() does not.
When the net.ipv4.tcp_syncookies is zero, inet_csk_reqsk_queue_is_full()
will cause an immediate drop before the sk_acceptq_is_full() check in
tcp_conn_request(), resulting in no connection can be made.
This patch tries to keep consistent with 64a146513f ("[NET]: Revert
incorrect accept queue backlog changes.").
Link: https://lore.kernel.org/netdev/20250102080258.53858-1-kuniyu@amazon.com/
Fixes: ef547f2ac1 ("tcp: remove max_qlen_log")
Signed-off-by: Zhongqiu Duan <dzq.aishenghu0@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250102171426.915276-1-dzq.aishenghu0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
two-thirds of our normal weekly fix count, but delaying sending these
until -rc7 seemed like a really bad idea.
AFAIK we have no bugs under investigation. One or two reverts for
stuff for which we haven't gotten a proper fix will likely come in
the next PR.
Including fixes from wireles and netfilter.
Current release - fix to a fix:
- netfilter: nft_set_hash: unaligned atomic read on struct nft_set_ext
- eth: gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
Previous releases - regressions:
- net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
- mptcp:
- fix sleeping rcvmsg sleeping forever after bad recvbuffer adjust
- fix TCP options overflow
- prevent excessive coalescing on receive, fix throughput
- net: fix memory leak in tcp_conn_request() if map insertion fails
- wifi: cw1200: fix potential NULL dereference after conversion
to GPIO descriptors
- phy: micrel: dynamically control external clock of KSZ PHY,
fix suspend behavior
Previous releases - always broken:
- af_packet: fix VLAN handling with MSG_PEEK
- net: restrict SO_REUSEPORT to inet sockets
- netdev-genl: avoid empty messages in NAPI get
- dsa: microchip: fix set_ageing_time function on KSZ9477 and LAN937X
- eth: gve: XDP fixes around transmit, queue wakeup etc.
- eth: ti: icssg-prueth: fix firmware load sequence to prevent time
jump which breaks timesync related operations
Misc:
- netlink: specs: mptcp: add missing attr and improve documentation
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YKS4
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireles and netfilter.
Nothing major here. Over the last two weeks we gathered only around
two-thirds of our normal weekly fix count, but delaying sending these
until -rc7 seemed like a really bad idea.
AFAIK we have no bugs under investigation. One or two reverts for
stuff for which we haven't gotten a proper fix will likely come in the
next PR.
Current release - fix to a fix:
- netfilter: nft_set_hash: unaligned atomic read on struct
nft_set_ext
- eth: gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
Previous releases - regressions:
- net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
- mptcp:
- fix sleeping rcvmsg sleeping forever after bad recvbuffer adjust
- fix TCP options overflow
- prevent excessive coalescing on receive, fix throughput
- net: fix memory leak in tcp_conn_request() if map insertion fails
- wifi: cw1200: fix potential NULL dereference after conversion to
GPIO descriptors
- phy: micrel: dynamically control external clock of KSZ PHY, fix
suspend behavior
Previous releases - always broken:
- af_packet: fix VLAN handling with MSG_PEEK
- net: restrict SO_REUSEPORT to inet sockets
- netdev-genl: avoid empty messages in NAPI get
- dsa: microchip: fix set_ageing_time function on KSZ9477 and LAN937X
- eth:
- gve: XDP fixes around transmit, queue wakeup etc.
- ti: icssg-prueth: fix firmware load sequence to prevent time
jump which breaks timesync related operations
Misc:
- netlink: specs: mptcp: add missing attr and improve documentation"
* tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init
net: ti: icssg-prueth: Fix firmware load sequence.
mptcp: prevent excessive coalescing on receive
mptcp: don't always assume copied data in mptcp_cleanup_rbuf()
mptcp: fix recvbuffer adjust on sleeping rcvmsg
ila: serialize calls to nf_register_net_hooks()
af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK
af_packet: fix vlan_get_tci() vs MSG_PEEK
net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()
net: restrict SO_REUSEPORT to inet sockets
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
net: sfc: Correct key_len for efx_tc_ct_zone_ht_params
net: wwan: t7xx: Fix FSM command timeout issue
sky2: Add device ID 11ab:4373 for Marvell 88E8075
mptcp: fix TCP options overflow.
net: mv643xx_eth: fix an OF node reference leak
gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
eth: bcmsysport: fix call balance of priv->clk handling routines
net: llc: reset skb->transport_header
netlink: specs: mptcp: fix missing doc
...
Current PF number description is vague, sometimes interpreted as
some PF index. VF number in the PCI specification starts at 1; however
in kernel, it starts at 0 for representor model.
Improve the description of devlink port attributes PF, VF and SF
numbers with these details.
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://patch.msgid.link/20241224183706.26571-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bridge input code may drop frames for various reasons and at various
points in the ingress handling logic. Currently kfree_skb() is used
everywhere, and therefore no drop reason is specified. Add drop reasons
to the most common drop points.
Drop reasons are not added exhaustively to the entire bridge code. The
intention is to incrementally add drop reasons to the rest of the bridge
code in follow up patches.
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241219163606.717758-3-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SKB_DROP_REASON_VXLAN_NO_REMOTE skb drop reason was introduced in
the specific context of vxlan. As it turns out, there are similar cases
when a packet needs to be dropped in other parts of the network stack,
such as the bridge module.
Rename SKB_DROP_REASON_VXLAN_NO_REMOTE and give it a more generic name,
so that it can be used in other parts of the network stack. This is not
a functional change, and the numeric value of the drop reason even
remains unchanged.
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241219163606.717758-2-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv4 code commonly has to initialise a flowi4 structure from an IPv4
socket. This requires looking at potential IPv4 options to set the
proper destination address, call flowi4_init_output() with the correct
set of parameters and run the sk_classify_flow security hook.
Instead of reimplementing these operations in different parts of the
stack, let's define inet_sk_init_flowi4() which does all these
operations.
The first user is inet_sk_rebuild_header(), where inet_sk_init_flowi4()
replaces ip_route_output_ports(). Unlike ip_route_output_ports(), which
sets the flowi4 structure and performs the route lookup in one go,
inet_sk_init_flowi4() only initialises the flow. The route lookup is
then done by ip_route_output_flow(). Decoupling flow initialisation
from route lookup makes this new interface applicable more broadly as
it will allow some users to overwrite specific struct flowi4 members
before the route lookup.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/fd416275262b1f518d5abfcef740ce4f4a1a6522.1734357769.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When bpf_tcp_ingress() is called, the skmsg is being redirected to the
ingress of the destination socket. Therefore, we should charge its
receive socket buffer, instead of sending socket buffer.
Because sk_rmem_schedule() tests pfmemalloc of skb, we need to
introduce a wrapper and call it for skmsg.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241210012039.1669389-2-zijianzhang@bytedance.com
Same as with converting &xdp_buff to skb on Rx, the code which allocates
a new skb and copies the XSk frame there is identical across the
drivers, so make it generic. This includes copying all the frags if they
are present in the original buff.
System percpu page_pools greatly improve XDP_PASS performance on XSk:
instead of page_alloc() + page_free(), the net core recycles the same
pages, so the only overhead left is memcpy()s. When the Page Pool is
not compiled in, the whole function is a return-NULL (but it always
gets selected when eBPF is enabled).
Note that the passed buff gets freed if the conversion is done w/o any
error, assuming you don't need this buffer after you convert it to an
skb.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-6-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, xsk_buff_add_frag() only adds the frag to pool's linked list,
not doing anything with the &xdp_buff. The drivers do that manually and
the logic is the same.
Make it really add an skb frag, just like xdp_buff_add_frag() does that,
and freeing frags on error if needed. This allows to remove repeating
code from i40e and ice and not add the same code again and again.
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-5-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code which builds an skb from an &xdp_buff keeps multiplying itself
around the drivers with almost no changes. Let's try to stop that by
adding a generic function.
Unlike __xdp_build_skb_from_frame(), always allocate an skbuff head
using napi_build_skb() and make use of the available xdp_rxq pointer to
assign the Rx queue index. In case of PP-backed buffer, mark the skb to
be recycled, as every PP user's been switched to recycle skbs.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code piece which would attach a frag to &xdp_buff is almost
identical across the drivers supporting XDP multi-buffer on Rx.
Make it a generic elegant "oneliner".
Also, I see lots of drivers calculating frags_truesize as
`xdp->frame_sz * nr_frags`. I can't say this is fully correct, since
frags might be backed by chunks of different sizes, especially with
stuff like the header split. Even page_pool_alloc() can give you two
different truesizes on two subsequent requests to allocate the same
buffer size. Add a field to &skb_shared_info (unionized as there's no
free slot currently on x86_64) to track the "true" truesize. It can
be used later when updating the skb.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similarly to other _dev shorthands, add one for page_pool_alloc_netmem()
to allocate a netmem using the default Rx GFP flags (ATOMIC | NOWARN) to
make the page -> netmem transition of drivers easier.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We already have enough variants of ip_route_output*() functions. We
don't need a GRE specific one in the generic route.h header file.
Furthermore, ip_route_output_gre() is only used once, in ipgre_open(),
where it can be easily replaced by a simple call to
ip_route_output_key().
While there, and for clarity, explicitly set .flowi4_scope to
RT_SCOPE_UNIVERSE instead of relying on the implicit zero
initialisation.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/ab7cba47b8558cd4bfe2dc843c38b622a95ee48e.1734527729.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
* define wiphy guard
* get TX power per link
* EHT 320 MHz channel support for mesh
ath11k
* QCA6698AQ support
ath9k
* RX inactivity detection
rtl8xxxu
* add more USB device IDs
rtw88
* add more USB device IDs
* enable USB RX aggregation and USB 3 to improve performance
rtw89
* PowerSave flow for Multi-Link Operation
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmdkbAoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuRIgf/dcjYr+eg3I7iU9qGxvEwHlDAC5CaMRwe
8+/SO6gy49xf6igleNQ2jBn/qAsJTiro6IzJwb1D6i16ax4TRUTEkTZSiYCzntKI
9Nkq59qhsRI4Vxrhp6NibUtVnjuRdSruVM5uLCccUCJ8tfq13WGhecR2pmV0TDO3
bRSza6L64XIuSmqHkuWS3Hz1YQvIvIZMeeiWoC35mtXg6ORRXpYloLtCzFn1zxoP
YPoeSfoAqIlaVwdB1DoaakU6is8oGZ0oI6zw/qaN8P7pYfqO62ATf6ZzAdwHE1dU
fow9nvwzln+BqgpdIK81QFR+XC+7LorCGSaQlYu6C0nxjSzycSrgOw==
=WIP7
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
- define wiphy guard
- get TX power per link
- EHT 320 MHz channel support for mesh
ath11k
- QCA6698AQ support
ath9k
- RX inactivity detection
rtl8xxxu
- add more USB device IDs
rtw88
- add more USB device IDs
- enable USB RX aggregation and USB 3 to improve performance
rtw89
- PowerSave flow for Multi-Link Operation
* tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits)
wifi: wlcore: sysfs: constify 'struct bin_attribute'
wifi: brcmfmac: clarify unmodifiable headroom log message
wifi: brcmfmac: add missing header include for brcmf_dbg
wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()
wifi: qtnfmac: fix spelling error in core.h
wifi: rtw89: phy: add dummy C2H event handler for report of TAS power
wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read()
wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc()
wifi: rtlwifi: pci: wait for firmware loading before releasing memory
wifi: rtlwifi: fix memory leaks and invalid access at probe error path
wifi: rtlwifi: destroy workqueue at rtl_deinit_core
wifi: rtlwifi: remove unused check_buddy_priv
wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2
wifi: rtw89: regd: update regulatory map to R68-R51
wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ
wifi: rtw89: disable firmware training HE GI and LTF
wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS
wifi: rtw89: ps: refactor channel info to firmware before entering PS
wifi: rtw89: ps: refactor PS flow to support MLO
wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s
...
====================
Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: add support for devlink health events
Przemek Kitszel says:
Reports for two kinds of events are implemented, Malicious Driver
Detection (MDD) and Tx hang.
Patches 1, 2, 3: core improvements (checkpatch.pl, devlink extension)
Patch 4: rename current ice devlink/ files
Patches 5, 6, 7: ice devlink health infra + reporters
Mateusz did good job caring for this series, and hardening the code.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add MDD logging via devlink health
ice: add Tx hang devlink health reporter
ice: rename devlink_port.[ch] to port.[ch]
devlink: add devlink_fmsg_dump_skb() function
devlink: add devlink_fmsg_put() macro
checkpatch: don't complain on _Generic() use
====================
Link: https://patch.msgid.link/20241217210835.3702003-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
page_pool_is_last_ref() releases a reference while the name,
to me at least, suggests it just checks if the refcount is 1.
The semantics of the function are the same as those of
atomic_dec_and_test() and refcount_dec_and_test(), so just
use the _and_test() suffix.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20241215212938.99210-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add devlink_fmsg_dump_skb() function that adds some diagnostic
information about skb (like length, pkt type, MAC, etc) to devlink
fmsg mechanism using bunch of devlink_fmsg_put() function calls.
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add devlink_fmsg_put() that dispatches based on the type
of the value to put, example: bool -> devlink_fmsg_bool_pair_put().
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit 6fd1d51cfa ("net: SO_RCVMARK socket option
for SO_MARK with recvmsg()").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Linux socket API currently allows setting SO_PRIORITY at the
socket level, applying a uniform priority to all packets sent through
that socket. The exception to this is IP_TOS, when the priority value
is calculated during the handling of
ancillary data, as implemented in commit f02db315b8 ("ipv4: IP_TOS
and IP_TTL can be specified as ancillary data").
However, this is a computed
value, and there is currently no mechanism to set a custom priority
via control messages prior to this patch.
According to this patch, if SO_PRIORITY is specified as ancillary data,
the packet is sent with the priority value set through
sockc->priority, overriding the socket-level values
set via the traditional setsockopt() method. This is analogous to
the existing support for SO_MARK, as implemented in
commit c6af0c227a ("ip: support SO_MARK cmsg").
If both cmsg SO_PRIORITY and IP_TOS are passed, then the one that
takes precedence is the last one in the cmsg list.
This patch has the side effect that raw_send_hdrinc now interprets cmsg
IP_TOS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-3-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a TLS handshake record carrying a KeyUpdate message is received,
all subsequent records will be encrypted with a new key. We need to
stop decrypting incoming records with the old key, and wait until
userspace provides a new key.
Make a note of this in the RX context just after decrypting that
record, and stop recvmsg/splice calls with EKEYEXPIRED until the new
key is available.
key_update_pending can't be combined with the existing bitfield,
because we will read it locklessly in ->poll.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change introduces netlink notifications for multicast address
changes. The following features are included:
* Addition and deletion of multicast addresses are reported using
RTM_NEWMULTICAST and RTM_DELMULTICAST messages with AF_INET and
AF_INET6.
* Two new notification groups: RTNLGRP_IPV4_MCADDR and
RTNLGRP_IPV6_MCADDR are introduced for receiving these events.
This change allows user space applications (e.g., ip monitor) to
efficiently track multicast group memberships by listening for netlink
events. Previously, applications relied on inefficient polling of
procfs, introducing delays. With netlink notifications, applications
receive realtime updates on multicast group membership changes,
enabling more precise metrics collection and system monitoring.
This change also unlocks the potential for implementing a wide range
of sophisticated multicast related features in user space by allowing
applications to combine kernel provided multicast address information
with user space data and communicate decisions back to the kernel for
more fine grained control. This mechanism can be used for various
purposes, including multicast filtering, IGMP/MLD offload, and
IGMP/MLD snooping.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Co-developed-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Link: https://lore.kernel.org/r/20180906091056.21109-1-pruddy@vyatta.att-mail.com
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dmabuf dma-addresses should not be dma_sync'd for CPU/device. Typically
its the driver responsibility to dma_sync for CPU, but the driver should
not dma_sync for CPU if the netmem is actually coming from a dmabuf
memory provider.
The page_pool already exposes a helper for dma_sync_for_cpu:
page_pool_dma_sync_for_cpu. Upgrade this existing helper to handle
netmem, and have it skip dma_sync if the memory is from a dmabuf memory
provider. Drivers should migrate to using this helper when adding
support for netmem.
Also minimize the impact on the dma syncing performance for pages. Special
case the dma-sync path for pages to not go through the overhead checks
for dma-syncing and conversion to netmem.
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20241211212033.1684197-5-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create page_pool_alloc_netmem to be the mirror of page_pool_alloc.
This enables drivers that want currently use page_pool_alloc to
transition to netmem by converting the call sites to
page_pool_alloc_netmem.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241211212033.1684197-3-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
page_pool_alloc_netmem (without an s) was the mirror of
page_pool_alloc_pages (with an s), which was confusing.
Rename to page_pool_alloc_netmems so it's the mirror of
page_pool_alloc_pages.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241211212033.1684197-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, __xdp_return() takes pointer to the virtual memory to free
a buffer. Apart from that this sometimes provokes redundant
data <--> page conversions, taking data pointer effectively prevents
lots of XDP code to support non-page-backed buffers, as there's no
mapping for the non-host memory (data is always NULL).
Just convert it to always take netmem reference. For
xdp_return_{buff,frame*}(), this chops off one page_address() per each
frag and adds one virt_to_netmem() (same as virt_to_page()) per header
buffer. For __xdp_return() itself, it removes one virt_to_page() for
MEM_TYPE_PAGE_POOL and another one for MEM_TYPE_PAGE_ORDER0, adding
one page_address() for [not really common nowadays]
MEM_TYPE_PAGE_SHARED, but the main effect is that the abovementioned
functions won't die or memleak anymore if the frame has non-host memory
attached and will correctly free those.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initially, xdp_frame::mem.id was used to search for the corresponding
&page_pool to return the page correctly.
However, after that struct page was extended to have a direct pointer
to its PP (netmem has it as well), further keeping of this field makes
no sense. xdp_return_frame_bulk() still used it to do a lookup, and
this leftover is now removed.
Remove xdp_frame::mem and replace it with ::mem_type, as only memory
type still matters and we need to know it to be able to free the frame
correctly.
As a cute side effect, we can now make every scalar field in &xdp_frame
of 4 byte width, speeding up accesses to them.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main reason for this change was to allow mixing pages from different
&page_pools within one &xdp_buff/&xdp_frame. Why not? With stuff like
devmem and io_uring zerocopy Rx, it's required to have separate PPs for
header buffers and payload buffers.
Adjust xdp_return_frame_bulk() and page_pool_put_netmem_bulk(), so that
they won't be tied to a particular pool. Let the latter create a
separate bulk of pages which's PP is different from the first netmem of
the bulk and process it after the main loop.
This greatly optimizes xdp_return_frame_bulk(): no more hashtable
lookups and forced flushes on PP mismatch. Also make
xdp_flush_frame_bulk() inline, as it's just one if + function call + one
u32 read, not worth extending the call ladder.
Co-developed-by: Toke Høiland-Jørgensen <toke@redhat.com> # iterative
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org> # while (count)
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add three qdisc-specific drop reasons and use them in sch_cake:
1) SKB_DROP_REASON_QDISC_OVERLIMIT
Whenever the total queue limit for a qdisc instance is exceeded
and a packet is dropped to make room.
2) SKB_DROP_REASON_QDISC_CONGESTED
Whenever a packet is dropped by the qdisc AQM algorithm because
congestion is detected.
3) SKB_DROP_REASON_CAKE_FLOOD
Whenever a packet is dropped by the flood protection part of the
CAKE AQM algorithm (BLUE).
Also use the existing SKB_DROP_REASON_QUEUE_PURGE in cake_clear_tin().
Reasons show up as:
perf record -a -e skb:kfree_skb sleep 1; perf script
iperf3 665 [005] 848.656964: skb:kfree_skb: skbaddr=0xffff98168a333500 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x10f0 reason: QDISC_OVERLIMIT
swapper 0 [001] 909.166055: skb:kfree_skb: skbaddr=0xffff98168280cee0 rx_sk=(nil) protocol=34525 location=cake_dequeue+0x5ef reason: QDISC_CONGESTED
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241211-cake-drop-reason-v2-1-920afadf4d1b@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
-----BEGIN PGP SIGNATURE-----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=1Po/
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
* tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
Bluetooth: Improve setsockopt() handling of malformed user input
====================
Link: https://patch.msgid.link/20241212142806.2046274-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The voice setting is used by sco_connect() or sco_conn_defer_accept()
after being set by sco_sock_setsockopt().
The PCM part of the voice setting is used for offload mode through PCM
chipset port.
This commits add support for mSBC 16 bits offloading, i.e. audio data
not transported over HCI.
The BCM4349B1 supports 16 bits transparent data on its I2S port.
If BT_VOICE_TRANSPARENT is used when accepting a SCO connection, this
gives only garbage audio while using BT_VOICE_TRANSPARENT_16BIT gives
correct audio.
This has been tested with connection to iPhone 14 and Samsung S24.
Fixes: ad10b1a487 ("Bluetooth: Add Bluetooth socket voice option")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----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=JEfQ
-----END PGP SIGNATURE-----
Merge tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix bogus test reports in rpath.sh selftest by adding permanent
neighbor entries, from Phil Sutter.
2) Lockdep reports possible ABBA deadlock in xt_IDLETIMER, fix it by
removing sysfs out of the mutex section, also from Phil Sutter.
3) It is illegal to release basechain via RCU callback, for several
reasons. Keep it simple and safe by calling synchronize_rcu() instead.
This is a partially reverting a botched recent attempt of me to fix
this basechain release path on netdevice removal.
From Florian Westphal.
netfilter pull request 24-12-11
* tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: do not defer rule destruction via call_rcu
netfilter: IDLETIMER: Fix for possible ABBA deadlock
selftests: netfilter: Stabilize rpath.sh
====================
Link: https://patch.msgid.link/20241211230130.176937-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Provide a trivial implementation for the .support_eee() method which
switch drivers can use to simply indicate that they support EEE on
all their user ports.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL149-006cZJ-JJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a hook to determine whether the switch supports EEE. This will
return false if the switch does not, or true if it does. If the
method is not implemented, we assume (currently) that the switch
supports EEE.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL144-006cZD-El@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Today we have a hardcoded delay of 1 sec before a TIME-WAIT socket can be
reused by reopening a connection. This is a safe choice based on an
assumption that the other TCP timestamp clock frequency, which is unknown
to us, may be as low as 1 Hz (RFC 7323, section 5.4).
However, this means that in the presence of short lived connections with an
RTT of couple of milliseconds, the time during which a 4-tuple is blocked
from reuse can be orders of magnitude longer that the connection lifetime.
Combined with a reduced pool of ephemeral ports, when using
IP_LOCAL_PORT_RANGE to share an egress IP address between hosts [1], the
long TIME-WAIT reuse delay can lead to port exhaustion, where all available
4-tuples are tied up in TIME-WAIT state.
Turn the reuse delay into a per-netns setting so that sysadmins can make
more aggressive assumptions about remote TCP timestamp clock frequency and
shorten the delay in order to allow connections to reincarnate faster.
Note that applications can completely bypass the TIME-WAIT delay protection
already today by locking the local port with bind() before connecting. Such
immediate connection reuse may result in PAWS failing to detect old
duplicate segments, leaving us with just the sequence number check as a
safety net.
This new configurable offers a trade off where the sysadmin can balance
between the risk of PAWS detection failing to act versus exhausting ports
by having sockets tied up in TIME-WAIT state for too long.
[1] https://lpc.events/event/16/contributions/1349/
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20241209-jakub-krn-909-poc-msec-tw-tstamp-v2-2-66aca0eed03e@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare ground for TIME-WAIT socket reuse with subsecond delay.
Today the last TS.Recent update timestamp, recorded in seconds and stored
tp->ts_recent_stamp and tw->tw_ts_recent_stamp fields, has two purposes.
Firstly, it is used to track the age of the last recorded TS.Recent value
to detect when that value becomes outdated due to potential wrap-around of
the other TCP timestamp clock (RFC 7323, section 5.5).
For this purpose a second-based timestamp is completely sufficient as even
in the worst case scenario of a peer using a high resolution microsecond
timestamp, the wrap-around interval is ~36 minutes long.
Secondly, it serves as a threshold value for allowing TIME-WAIT socket
reuse. A TIME-WAIT socket can be reused only once the virtual 1 Hz clock,
ktime_get_seconds, is past the TS.Recent update timestamp.
The purpose behind delaying the TIME-WAIT socket reuse is to wait for the
other TCP timestamp clock to tick at least once before reusing the
connection. It is only then that the PAWS mechanism for the reopened
connection can detect old duplicate segments from the previous connection
incarnation (RFC 7323, appendix B.2).
In this case using a timestamp with second resolution not only blocks the
way toward allowing faster TIME-WAIT reuse after shorter subsecond delay,
but also makes it impossible to reliably delay TW reuse by one second.
As Eric Dumazet has pointed out [1], due to timestamp rounding, the TW
reuse delay will actually be between (0, 1] seconds, and 0.5 seconds on
average. We delay TW reuse for one full second only when last TS.Recent
update coincides with our virtual 1 Hz clock tick.
Considering the above, introduce a dedicated field to store a millisecond
timestamp of transition into the TIME-WAIT state. Place it in an existing
4-byte hole inside inet_timewait_sock structure to avoid an additional
memory cost.
Use the new timestamp to (i) reliably delay TIME-WAIT reuse by one second,
and (ii) prepare for configurable subsecond reuse delay in the subsequent
change.
We assume here that a full one second delay was the original intention in
[2] because it accounts for the worst case scenario of the other TCP using
the slowest recommended 1 Hz timestamp clock.
A more involved alternative would be to change the resolution of the last
TS.Recent update timestamp, tw->tw_ts_recent_stamp, to milliseconds.
[1] https://lore.kernel.org/netdev/CANn89iKB4GFd8sVzCbRttqw_96o3i2wDhX-3DraQtsceNGYwug@mail.gmail.com/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b8439924316d5bcb266d165b93d632a4b4b859af
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20241209-jakub-krn-909-poc-msec-tw-tstamp-v2-1-66aca0eed03e@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nf_tables_chain_destroy can sleep, it can't be used from call_rcu
callbacks.
Moreover, nf_tables_rule_release() is only safe for error unwinding,
while transaction mutex is held and the to-be-desroyed rule was not
exposed to either dataplane or dumps, as it deactives+frees without
the required synchronize_rcu() in-between.
nft_rule_expr_deactivate() callbacks will change ->use counters
of other chains/sets, see e.g. nft_lookup .deactivate callback, these
must be serialized via transaction mutex.
Also add a few lockdep asserts to make this more explicit.
Calling synchronize_rcu() isn't ideal, but fixing this without is hard
and way more intrusive. As-is, we can get:
WARNING: .. net/netfilter/nf_tables_api.c:5515 nft_set_destroy+0x..
Workqueue: events nf_tables_trans_destroy_work
RIP: 0010:nft_set_destroy+0x3fe/0x5c0
Call Trace:
<TASK>
nf_tables_trans_destroy_work+0x6b7/0xad0
process_one_work+0x64a/0xce0
worker_thread+0x613/0x10d0
In case the synchronize_rcu becomes an issue, we can explore alternatives.
One way would be to allocate nft_trans_rule objects + one nft_trans_chain
object, deactivate the rules + the chain and then defer the freeing to the
nft destroy workqueue. We'd still need to keep the synchronize_rcu path as
a fallback to handle -ENOMEM corner cases though.
Reported-by: syzbot+b26935466701e56cfdc2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67478d92.050a0220.253251.0062.GAE@google.com/T/
Fixes: c03d278fdf ("netfilter: nf_tables: wait for rcu grace period on net_device removal")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The bt_copy_from_sockptr() return value is being misinterpreted by most
users: a non-zero result is mistakenly assumed to represent an error code,
but actually indicates the number of bytes that could not be copied.
Remove bt_copy_from_sockptr() and adapt callers to use
copy_safe_from_sockptr().
For sco_sock_setsockopt() (case BT_CODEC) use copy_struct_from_sockptr() to
scrub parts of uninitialized buffer.
Opportunistically, rename `len` to `optlen` in hci_sock_setsockopt_old()
and hci_sock_setsockopt().
Fixes: 51eda36d33 ("Bluetooth: SCO: Fix not validating setsockopt user input")
Fixes: a97de7bff1 ("Bluetooth: RFCOMM: Fix not validating setsockopt user input")
Fixes: 4f3951242a ("Bluetooth: L2CAP: Fix not validating setsockopt user input")
Fixes: 9e8742cdfc ("Bluetooth: ISO: Fix not validating setsockopt user input")
Fixes: b2186061d6 ("Bluetooth: hci_sock: Fix not validating setsockopt user input")
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
- avoid CSA warnings during link removal
(by changing link bitmap after remove)
- fix # of spatial streams initialisation
- fix queues getting stuck in some CSA cases
and resume failures
- fix interface address when switching monitor mode
- fix MBSS change flags 32-bit stack corruption
- more UBSAN __counted_by "fixes" ...
- fix link ID netlink validation
-----BEGIN PGP SIGNATURE-----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=qo16
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
A small set of fixes:
- avoid CSA warnings during link removal
(by changing link bitmap after remove)
- fix # of spatial streams initialisation
- fix queues getting stuck in some CSA cases
and resume failures
- fix interface address when switching monitor mode
- fix MBSS change flags 32-bit stack corruption
- more UBSAN __counted_by "fixes" ...
- fix link ID netlink validation
* tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: sme: init n_channels before channels[] access
wifi: mac80211: fix station NSS capability initialization order
wifi: mac80211: fix vif addr when switching from monitor to station
wifi: mac80211: fix a queue stall in certain cases of CSA
wifi: mac80211: wake the queues in case of failure in resume
wifi: cfg80211: clear link ID from bitmap during link delete after clean up
wifi: mac80211: init cnt before accessing elem in ieee80211_copy_mbssid_beacon
wifi: mac80211: fix mbss changed flags corruption on 32 bit systems
wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one
====================
Link: https://patch.msgid.link/20241210130145.28618-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to make it possible to configure which bits in VXLAN header should
be considered reserved, introduce a new field vxlan_config::reserved_bits.
Have it cover the whole header, except for the VNI-present bit and the bits
for VNI itself, and have individual enabled features clear more bits off
reserved_bits.
(This is expressed as first constructing a used_bits set, and then
inverting it to get the reserved_bits. The set of used_bits will be useful
on its own for validation of user-set reserved_bits in a following patch.)
The patch also moves a comment relevant to the validation from the unparsed
validation site up to the new site. Logically this patch should add the new
comment, and a later patch that removes the unparsed bits would remove the
old comment. But keeping both legs in the same patch is better from the
history spelunking point of view.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/984dbf98d5940d3900268dbffaf70961f731d4a4.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kernel-doc -Wall warns about missing Return: statement for non-void
functions. We have a number of kdocs in our headers which are missing
the colon, IOW they use
* Return some value
or
* Returns some value
Having the colon makes some sense, it should help kdoc parser avoid
false positives. So add them. This is mostly done with a sed script,
and removing the unnecessary cases (mostly the comments which aren't
kdoc).
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20241205165914.1071102-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, page_pool_put_page_bulk() indeed takes an array of pointers
to the data, not pages, despite the name. As one side effect, when
you're freeing frags from &skb_shared_info, xdp_return_frame_bulk()
converts page pointers to virtual addresses and then
page_pool_put_page_bulk() converts them back. Moreover, data pointers
assume every frag is placed in the host memory, making this function
non-universal.
Make page_pool_put_page_bulk() handle array of netmems. Pass frag
netmems directly and use virt_to_netmem() when freeing xdpf->data,
so that the PP core will then get the compound netmem and take care
of the rest.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241203173733.3181246-9-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following netmem counterparts:
* virt_to_netmem() -- simple page_to_netmem(virt_to_page()) wrapper;
* netmem_is_pfmemalloc() -- page_is_pfmemalloc() for page-backed
netmems, false otherwise;
and the following "unsafe" versions:
* __netmem_to_page()
* __netmem_get_pp()
* __netmem_address()
They do the same as their non-underscored buddies, but assume the netmem
is always page-backed. When working with header &page_pools, you don't
need to check whether netmem belongs to the host memory and you can
never get NULL instead of &page. Checks for the LSB, clearing the LSB,
branches take cycles and increase object code size, sometimes
significantly. When you're sure your PP is always host, you can avoid
this by using the underscored counterparts.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241203173733.3181246-8-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One may need to register memory model separately from xdp_rxq_info. One
simple example may be XDP test run code, but in general, it might be
useful when memory model registering is managed by one layer and then
XDP RxQ info by a different one.
Allow such scenarios by adding a simple helper which "attaches"
already registered memory model to the desired xdp_rxq_info. As this
is mostly needed for Page Pool, add a special function to do that for
a &page_pool pointer.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241203173733.3181246-5-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lots of read-only helpers for &xdp_buff and &xdp_frame, such as getting
the frame length, skb_shared_info etc., don't have their arguments
marked with `const` for no reason. Add the missing annotations to leave
less place for mistakes and more for optimization.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241203173733.3181246-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the series "XSk buff on a diet" by Maciej, the greatest pow-2
which &xdp_buff_xsk can be divided got reduced from 16 to 8 on x86_64.
Also, sizeof(xdp_buff_xsk) now is 120 bytes, which, taking the previous
sentence into account, leads to that it leaves 8 bytes at the end of
cacheline, which means an array of buffs will have its elements
messed between the cachelines chaotically.
Use __aligned_largest for this struct. This alignment is usually 16
bytes, which makes it fill two full cachelines and align an array
nicely. ___cacheline_aligned may be excessive here, especially on
arches with 128-256 byte CLs, as well as 32-bit arches (76 -> 96
bytes on MIPS32R2), while not doing better than _largest.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241203173733.3181246-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth: bnxt_en: support header page pool in queue API
- eth: ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth: mlxsw: use correct key block on Spectrum-4
- eth: mlx5: fix memory leak in mlx5hws_definer_calc_layout
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=nkPk
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
-----BEGIN PGP SIGNATURE-----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=3N6k
-----END PGP SIGNATURE-----
Merge tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix esoteric undefined behaviour due to uninitialized stack access
in ip_vs_protocol_init(), from Jinghao Jia.
2) Fix iptables xt_LED slab-out-of-bounds due to incorrect sanitization
of the led string identifier, reported by syzbot. Patch from
Dmitry Antipov.
3) Remove WARN_ON_ONCE reachable from userspace to check for the maximum
cgroup level, nft_socket cgroup matching is restricted to 255 levels,
but cgroups allow for INT_MAX levels by default. Reported by syzbot.
4) Fix nft_inner incorrect use of percpu area to store tunnel parser
context with softirqs, resulting in inconsistent inner header
offsets that could lead to bogus rule mismatches, reported by syzbot.
5) Grab module reference on ipset core while requesting set type modules,
otherwise kernel crash is possible by removing ipset core module,
patch from Phil Sutter.
6) Fix possible double-free in nft_hash garbage collector due to unstable
walk interator that can provide twice the same element. Use a sequence
number to skip expired/dead elements that have been already scheduled
for removal. Based on patch from Laurent Fasnach
netfilter pull request 24-12-05
* tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
netfilter: nft_inner: incorrect percpu area handling under softirq
netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level
netfilter: x_tables: fix LED ID check in led_tg_check()
ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init()
====================
Link: https://patch.msgid.link/20241205002854.162490-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add static inline dst_dev_overhead() function to include/net/dst.h. This
helper function is used by ioam6_iptunnel, rpl_iptunnel and
seg6_iptunnel to get the dev's overhead based on a cache entry
(dst_entry). If the cache is empty, the default and generic value
skb->mac_len is returned. Otherwise, LL_RESERVED_SPACE() over dst's dev
is returned.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Define `XFRM_MODE_IPTFS` and `IPSEC_MODE_IPTFS` constants, and add these to
switch case and conditionals adjacent with the existing TUNNEL modes.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add a set of callbacks xfrm_mode_cbs to xfrm_state. These callbacks
enable the addition of new xfrm modes, such as IP-TFS to be defined
in modules.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Replace the (secctx,seclen) pointer pair with a single
lsm_context pointer to allow return of the LSM identifier
along with the context and context length. This allows
security_release_secctx() to know how to release the
context. Callers have been modified to use or save the
returned data from the new structure.
security_secid_to_secctx() and security_lsmproc_to_secctx()
will now return the length value on success instead of 0.
Cc: netdev@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: netfilter-devel@vger.kernel.org
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak, kdoc fix, signedness fix from Dan Carpenter]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a new lsm_context data structure to hold all the information about a
"security context", including the string, its size and which LSM allocated
the string. The allocation information is necessary because LSMs have
different policies regarding the lifecycle of these strings. SELinux
allocates and destroys them on each use, whereas Smack provides a pointer
to an entry in a list that never goes away.
Update security_release_secctx() to use the lsm_context instead of a
(char *, len) pair. Change its callers to do likewise. The LSMs
supporting this hook have had comments added to remind the developer
that there is more work to be done.
The BPF security module provides all LSM hooks. While there has yet to
be a known instance of a BPF configuration that uses security contexts,
the possibility is real. In the existing implementation there is
potential for multiple frees in that case.
Cc: linux-integrity@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: netfilter-devel@vger.kernel.org
To: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: linux-nfs@vger.kernel.org
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
ML interfaces can have multiple affiliated links to it and
hence there is a need to report tx power of specified link
rather deflink.
Add changes to report tx power of requested link from mac80211,
also pass link id as an argument in get_tx_power op so that supported
drivers can use it to report link's tx power.
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20241125083217.216095-3-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, TX power is reported on interface/wdev level as
part of NL80211_CMD_GET_INTERFACE. With MLO, Multiple links
can be part of an interface/wdev and hence its necessary to
report the TX power of each link.
Add support to send tx power for all valid links of an MLD as
part of NL80211_CMD_GET_INTERFACE request.
As far as userspace is concerned, there is no behavioral change
for Non-ML Interfaces. For ML interfaces, userspace should fetch
TX power that is nested inside NL80211_ATTR_MLO_LINKS, similar to
how channel info(NL80211_ATTR_WIPHY_FREQ) is fetched.
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20241125083217.216095-2-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Define a guard for the wiphy mutex, and use it in
most code in cfg80211, though not all due to some
interaction with RTNL and/or indentation.
Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241122094225.88765cbaab65.I610c9b14f36902e75e1d13f0db29f8bef2298804@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Softirq can interrupt ongoing packet from process context that is
walking over the percpu area that contains inner header offsets.
Disable bh and perform three checks before restoring the percpu inner
header offsets to validate that the percpu area is valid for this
skbuff:
1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff
has already been parsed before for inner header fetching to
register.
2) Validate that the percpu area refers to this skbuff using the
skbuff pointer as a cookie. If there is a cookie mismatch, then
this skbuff needs to be parsed again.
3) Finally, validate if the percpu area refers to this tunnel type.
Only after these three checks the percpu area is restored to a on-stack
copy and bh is enabled again.
After inner header fetching, the on-stack copy is stored back to the
percpu area.
Fixes: 3a07327d10 ("netfilter: nft_inner: support for inner tunnel header matching")
Reported-by: syzbot+84d0441b9860f0d63285@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since adding support for opting out of virtual monitor support, a zero vif
addr was used to indicate passive vs active monitor to the driver.
This would break the vif->addr when changing the netdev mac address before
switching the interface from monitor to sta mode.
Fix the regression by adding a separate flag to indicate whether vif->addr
is valid.
Reported-by: syzbot+9ea265d998de25ac6a46@syzkaller.appspotmail.com
Fixes: 9d40f7e327 ("wifi: mac80211: add flag to opt out of virtual monitor support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20241115115850.37449-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we got an unprotected action frame with CSA and then we heard the
beacon with the CSA IE, we'll block the queues with the CSA reason
twice. Since this reason is refcounted, we won't wake up the queues
since we wake them up only once and the ref count will never reach 0.
This led to blocked queues that prevented any activity (even
disconnection wouldn't reset the queue state and the only way to recover
would be to reload the kernel module.
Fix this by not refcounting the CSA reason.
It becomes now pointless to maintain the csa_blocked_queues state.
Remove it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: 414e090bc4 ("wifi: mac80211: restrict public action ECSA frame handling")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241119173108.5ea90828c2cc.I4f89e58572fb71ae48e47a81e74595cac410fbac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmdKGgEVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGrFoQAIgioJPRG+HC6bGmjy4tL4bq1RAm
78nbD12grrAa+NvQGRZYRs264rWxBGwrNfGGS9BDvlWJZ3fmKEuPlfCIxC0nkKk8
LVLNxSVvgpHE47RQ+E4V+yYhrlZKb4aWZjH3ZICn7vxRgbQ5Veq61aatluVHyn9c
I8g+APYN/S1A4JkFzaLe8GV7v5OM3+zGSn3M9n7/DxVkoiNrMOXJm5hRdRgYfEv/
kMppheY2PPshZsaL+yLAdrJccY5au5vYE/v8wHkMtvM/LF6YwjgqPVDRFQ30BuLM
sAMMd6AUoopiDZQOpqmXYukU0b0MQPswg3jmB+PWUBrlsuydRa8kkyPwUaFrDd+w
9d0jZRc8/O/lxUdD1AefRkNcA/dIJ4lTPr+2NpxwHuj2UFo0gLQmtjBggMFHaWvs
0NQRBPlxfOE4+Htl09gyg230kHuWq+rh7xqbyJCX+hBOaZ6kI2lryl6QkgpAoS+x
KDOcUKnsgGMGARQRrvCOAXnQs+rjkW8fEm6t7eSBFPuWJMK85k4LmxOog8GVYEdM
JcwCnCHt9TtcHlSxLRnVXj2aqGTFNLJXE1aLyCp9u8MxZ7qcx01xOuCmwp6FRzNq
ghal7ngA58Y/S4K/oJ+CW2KupOb6CFne8mpyotpYeWI7MR64t0YWs4voZkuK46E2
CEBfA4PDehA4BxQe
=GDKD
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
* tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits)
kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms
gitignore: Don't ignore 'tags' directory
kbuild: add dependency from vmlinux to resolve_btfids
modpost: replace tdb_hash() with hash_str()
kbuild: deb-pkg: add python3:native to build dependency
genksyms: reduce indentation in export_symbol()
modpost: improve error messages in device_id_check()
modpost: rename alias symbol for MODULE_DEVICE_TABLE()
modpost: rename variables in handle_moddevtable()
modpost: move strstarts() to modpost.h
modpost: convert do_usb_table() to a generic handler
modpost: convert do_of_table() to a generic handler
modpost: convert do_pnp_device_entry() to a generic handler
modpost: convert do_pnp_card_entries() to a generic handler
modpost: call module_alias_printf() from all do_*_entry() functions
modpost: pass (struct module *) to do_*_entry() functions
modpost: remove DEF_FIELD_ADDR_VAR() macro
modpost: deduplicate MODULE_ALIAS() for all drivers
modpost: introduce module_alias_printf() helper
modpost: remove unnecessary check in do_acpi_entry()
...
Commit b1fca27d38 ("kernel debug: support resetting WARN*_ONCE")
added support for clearing the state of once warnings. However,
it is not functional when CONFIG_LD_DEAD_CODE_DATA_ELIMINATION or
CONFIG_LTO_CLANG is enabled, because .data.once matches the
.data.[0-9a-zA-Z_]* pattern in the DATA_MAIN macro.
Commit cb87481ee8 ("kbuild: linker script do not match C names unless
LD_DEAD_CODE_DATA_ELIMINATION is configured") was introduced to suppress
the issue for the default CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=n case,
providing a minimal fix for stable backporting. We were aware this did
not address the issue for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y. The
plan was to apply correct fixes and then revert cb87481ee8. [1]
Seven years have passed since then, yet the #ifdef workaround remains in
place. Meanwhile, commit b1fca27d38 introduced the .data.once section,
and commit dc5723b02e ("kbuild: add support for Clang LTO") extended
the #ifdef.
Using a ".." separator in the section name fixes the issue for
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION and CONFIG_LTO_CLANG.
[1]: https://lore.kernel.org/linux-kbuild/CAK7LNASck6BfdLnESxXUeECYL26yUDm0cwRZuM4gmaWUkxjL5g@mail.gmail.com/
Fixes: b1fca27d38 ("kernel debug: support resetting WARN*_ONCE")
Fixes: dc5723b02e ("kbuild: add support for Clang LTO")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core
----
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read
access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code
--------------------------------------------
- Add small file operations for debugfs, to reduce the struct ops size.
- Refactoring and optimization for the implementation of page_frag API,
This is a preparatory work to consolidate the page_frag
implementation.
Netfilter
---------
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users
the option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent
CI improvements.
BPF
---
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols
---------
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after close,
the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per device
neigh lists.
Driver API
----------
- Introduce a unified interface to configure transmission H/W shaping,
and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling
-----------------
- forwarding: introduce deferred commands, to simplify
the cleanup phase
Drivers
-------
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- adds support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Adds representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- adds support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implements page pool support
- macsec:
- inherit lower device's features and TSO limits when offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- Add the dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- adds clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmc8sukSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkLEYQAIMM6Qjh0bh3Byr3gOS1xZzXG+APLjP4
9Jr0p3i+X53i90jvVqzeVO5FTc95MVHSKZ3kvPkDMXSLUaEJxocNHCI5Dzl/2/qL
wWdpUB6/ou+jKB4Bn6Z8OvVODT7qrr0tVa9M2/fuKWrIsOU/ntIhG8EhnGddk5U/
vKPSf5PUIb81uNRnF58VusY3wrT1dEoh9VfJYxL+ST+inPxjEAMy6Y+lmlsjGaSX
jrS+Pp9KYiUwl3Qt0AQs+cG4OHkJdjbnChrfosWwpkiyddO8klVq06+wX/TiSzfF
b9VZtBfy/GZs3lkE1mQkcILdtX5pP3YHQdpsuxFfVI0JHVszx2ck7WdoRux/8F0v
kKZsYcO7bH9I1wMFP66Ff9hIbdEQaeucK+KdDkXyPNMfP91Vzmfjii8IBxOC36Ie
BbOeFUrXyTxxJ2u0vf/X9JtIq8bcrkNrSd1n1jlGPMqG3FVzsY95+Oi4qfsyeUbl
lS1PlVTqPMPFdX54HnxM3y2rJjhd7iXhkvmtuXNjRFThXlOiK3maAPWlM1aZ3b8u
Vjs4JFUsW0tleZG+RzANjsGjXbf7AiPUGLZt+acem0K+fcjG4i5aGIAJrxwa/ORx
eG74IZRt5cOI371W7gNLGHjwnuge8tFPgOWcRP2eozNm7jvMYALBejYS7eWUTvaf
THcvVM+bupEZ
=GzPr
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
-----BEGIN PGP SIGNATURE-----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=m/yY
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
"Thirteen patches, all focused on moving away from the current 'secid'
LSM identifier to a richer 'lsm_prop' structure.
This move will help reduce the translation that is necessary in many
LSMs, offering better performance, and make it easier to support
different LSMs in the future"
* tag 'lsm-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: remove lsm_prop scaffolding
netlabel,smack: use lsm_prop for audit data
audit: change context data from secid to lsm_prop
lsm: create new security_cred_getlsmprop LSM hook
audit: use an lsm_prop in audit_names
lsm: use lsm_prop in security_inode_getsecid
lsm: use lsm_prop in security_current_getsecid
audit: update shutdown LSM data
lsm: use lsm_prop in security_ipc_getsecid
audit: maintain an lsm_prop in audit_context
lsm: add lsmprop_to_secctx hook
lsm: use lsm_prop in security_audit_rule_match
lsm: add the lsm_prop data structure
Implement ipv6 udp hash4 like that in ipv4. The major difference is that
the hash value should be calculated with udp6_ehashfn(). Besides,
ipv4-mapped ipv6 address is handled before hash() and rehash(). Export
udp_ehashfn because now we use it in udpv6 rehash.
Core procedures of hash/unhash/rehash are same as ipv4, and udpv4 and
udpv6 share the same udptable, so some functions in ipv4 hash4 can also
be shared.
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the udp_table has two hash table, the port hash and portaddr
hash. Usually for UDP servers, all sockets have the same local port and
addr, so they are all on the same hash slot within a reuseport group.
In some applications, UDP servers use connect() to manage clients. In
particular, when firstly receiving from an unseen 4 tuple, a new socket
is created and connect()ed to the remote addr:port, and then the fd is
used exclusively by the client.
Once there are connected sks in a reuseport group, udp has to score all
sks in the same hash2 slot to find the best match. This could be
inefficient with a large number of connections, resulting in high
softirq overhead.
To solve the problem, this patch implement 4-tuple hash for connected
udp sockets. During connect(), hash4 slot is updated, as well as a
corresponding counter, hash4_cnt, in hslot2. In __udp4_lib_lookup(),
hslot4 will be searched firstly if the counter is non-zero. Otherwise,
hslot2 is used like before. Note that only connected sockets enter this
hash4 path, while un-connected ones are not affected.
hlist_nulls is used for hash4, because we probably move to another hslot
wrongly when lookup with concurrent rehash. Then we check nulls at the
list end to see if we should restart lookup. Because udp does not use
SLAB_TYPESAFE_BY_RCU, we don't need to touch sk_refcnt when lookup.
Stress test results (with 1 cpu fully used) are shown below, in pps:
(1) _un-connected_ socket as server
[a] w/o hash4: 1,825176
[b] w/ hash4: 1,831750 (+0.36%)
(2) 500 _connected_ sockets as server
[c] w/o hash4: 290860 (only 16% of [a])
[d] w/ hash4: 1,889658 (+3.1% compared with [b])
With hash4, compute_score is skipped when lookup, so [d] is slightly
better than [b].
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new hash list, hash4, in udp table. It will be used to implement
4-tuple hash for connected udp sockets. This patch adds the hlist to
table, and implements helpers and the initialization. 4-tuple hash is
implemented in the following patch.
hash4 uses hlist_nulls to avoid moving wrongly onto another hlist due to
concurrent rehash, because rehash() can happen with lookup().
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preparing for udp 4-tuple hash (uhash4 for short).
To implement uhash4 without cache line missing when lookup, hslot2 is
used to record the number of hashed sockets in hslot4. Thus adding a new
struct udp_hslot_main with field hash4_cnt, which is used by hash2. The
new struct is used to avoid doubling the size of udp_hslot.
Before uhash4 lookup, firstly checking hash4_cnt to see if there are
hashed sks in hslot4. Because hslot2 is always used in lookup, there is
no cache line miss.
Related helpers are updated, and use the helpers as possible.
uhash4 is implemented in following patches.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=Ioo8
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-11-15
1) Add support for RFC 9611 per cpu xfrm state handling.
2) Add inbound and outbound xfrm state caches to speed up
state lookups.
3) Convert xfrm to dscp_t. From Guillaume Nault.
4) Fix error handling in build_aevent.
From Everest K.C.
5) Replace strncpy with strscpy_pad in copy_to_user_auth.
From Daniel Yang.
6) Fix an uninitialized symbol during acquire state insertion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- btusb: add Foxconn 0xe0fc for Qualcomm WCN785x
- btmtk: Fix ISO interface handling
- Add quirk for ATS2851
- btusb: Add RTL8852BE device 0489:e123
- ISO: Do not emit LE PA/BIG Create Sync if previous is pending
- btusb: Add USB HW IDs for MT7920/MT7925
- btintel_pcie: Add handshake between driver and firmware
- btintel_pcie: Add recovery mechanism
- hci_conn: Use disable_delayed_work_sync
- SCO: Use kref to track lifetime of sco_conn
- ISO: Use kref to track lifetime of iso_conn
- btnxpuart: Add GPIO support to power save feature
- btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x
-----BEGIN PGP SIGNATURE-----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=niGG
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: add Foxconn 0xe0fc for Qualcomm WCN785x
- btmtk: Fix ISO interface handling
- Add quirk for ATS2851
- btusb: Add RTL8852BE device 0489:e123
- ISO: Do not emit LE PA/BIG Create Sync if previous is pending
- btusb: Add USB HW IDs for MT7920/MT7925
- btintel_pcie: Add handshake between driver and firmware
- btintel_pcie: Add recovery mechanism
- hci_conn: Use disable_delayed_work_sync
- SCO: Use kref to track lifetime of sco_conn
- ISO: Use kref to track lifetime of iso_conn
- btnxpuart: Add GPIO support to power save feature
- btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x
* tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (51 commits)
Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC
Bluetooth: fix use-after-free in device_for_each_child()
Bluetooth: btintel: Direct exception event to bluetooth stack
Bluetooth: hci_core: Fix calling mgmt_device_connected
Bluetooth: hci_bcm: Use the devm_clk_get_optional() helper
Bluetooth: ISO: Send BIG Create Sync via hci_sync
Bluetooth: hci_conn: Remove alloc from critical section
Bluetooth: ISO: Use kref to track lifetime of iso_conn
Bluetooth: SCO: Use kref to track lifetime of sco_conn
Bluetooth: HCI: Add IPC(11) bus type
Bluetooth: btusb: Add 3 HWIDs for MT7925
Bluetooth: btusb: Add new VID/PID 0489/e124 for MT7925
Bluetooth: ISO: Update hci_conn_hash_lookup_big for Broadcast slave
Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending
Bluetooth: ISO: Fix matching parent socket for BIS slave
Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending
Bluetooth: btrtl: Decrease HCI_OP_RESET timeout from 10 s to 2 s
Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name()
Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925
Bluetooth: btmtk: adjust the position to init iso data anchor
...
====================
Link: https://patch.msgid.link/20241114214731.1994446-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Tp49
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Extended netlink error reporting if nfnetlink attribute parser fails,
from Donald Hunter.
2) Incorrect request_module() module, from Simon Horman.
3) A series of patches to reduce memory consumption for set element
transactions.
Florian Westphal says:
"When doing a flush on a set or mass adding/removing elements from a
set, each element needs to allocate 96 bytes to hold the transactional
state.
In such cases, virtually all the information in struct nft_trans_elem
is the same.
Change nft_trans_elem to a flex-array, i.e. a single nft_trans_elem
can hold multiple set element pointers.
The number of elements that can be stored in one nft_trans_elem is limited
by the slab allocator, this series limits the compaction to at most 62
elements as it caps the reallocation to 2048 bytes of memory."
4) A series of patches to prepare the transition to dscp_t in .flowi_tos.
From Guillaume Nault.
5) Support for bitwise operations with two source registers,
from Jeremy Sowden.
* tag 'nf-next-24-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: bitwise: add support for doing AND, OR and XOR directly
netfilter: bitwise: rename some boolean operation functions
netfilter: nf_dup4: Convert nf_dup_ipv4_route() to dscp_t.
netfilter: nft_fib: Convert nft_fib4_eval() to dscp_t.
netfilter: rpfilter: Convert rpfilter_mt() to dscp_t.
netfilter: flow_offload: Convert nft_flow_route() to dscp_t.
netfilter: ipv4: Convert ip_route_me_harder() to dscp_t.
netfilter: nf_tables: allocate element update information dynamically
netfilter: nf_tables: switch trans_elem to real flex array
netfilter: nf_tables: prepare nft audit for set element compaction
netfilter: nf_tables: prepare for multiple elements in nft_trans_elem structure
netfilter: nf_tables: add nft_trans_commit_list_add_elem helper
netfilter: bpf: Pass string literal as format argument of request_module()
netfilter: nfnetlink: Report extack policy errors for batched ops
====================
Link: https://patch.msgid.link/20241115133207.8907-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds the initial implementation of MGMT_OP_HCI_CMD_SYNC as
documented in mgmt-api (BlueZ tree):
Send HCI command and wait for event Command
===========================================
Command Code: 0x005B
Controller Index: <controller id>
Command Parameters: Opcode (2 Octets)
Event (1 Octet)
Timeout (1 Octet)
Parameter Length (2 Octets)
Parameter (variable)
Return Parameters: Response (1-variable Octets)
This command may be used to send a HCI command and wait for an
(optional) event.
The HCI command is specified by the Opcode, any arbitrary is supported
including vendor commands, but contrary to the like of
Raw/User channel it is run as an HCI command send by the kernel
since it uses its command synchronization thus it is possible to wait
for a specific event as a response.
Setting event to 0x00 will cause the command to wait for either
HCI Command Status or HCI Command Complete.
Timeout is specified in seconds, setting it to 0 will cause the
default timeout to be used.
Possible errors: Failed
Invalid Parameters
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zephyr(1) has been using the same bus defines as Linux so tools likes of
btmon, etc, are able to decode the bus used by the driver to transport
HCI packets.
Link: https://github.com/zephyrproject-rtos/zephyr/pull/80808
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently, hci_conn_hash_lookup_big only checks for BIS master connections,
by filtering out connections with the destination address set. This commit
updates this function to also consider BIS slave connections, since it is
also used for a Broadcast Receiver to set an available BIG handle before
issuing the LE BIG Create Sync command.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth Core spec does not allow a LE BIG Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2586).
In order to avoid this issue, the HCI_CONN_CREATE_BIG_SYNC was added
to mark that the LE BIG Create Sync command has been sent for a hcon.
Once the BIG Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth Core spec does not allow a LE PA Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2493).
In order to avoid this issue, the HCI_CONN_CREATE_PA_SYNC was added
to mark that the LE PA Create Sync command has been sent for a hcon.
Once the PA Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds quirks for broken extended create connection,
and write auth payload timeout.
Signed-off-by: Danil Pylaev <danstiv404@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move the timeout/expire/flag members from nft_trans_one_elem struct into
a dybamically allocated structure, only needed when timeout update was
requested.
This halves size of nft_trans_one_elem struct and allows to compact up to
124 elements in one transaction container rather than 62.
This halves memory requirements for a large flush or insert transaction,
where ->update remains NULL.
Care has to be taken to release the extra data in all spots, including
abort path.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add helpers to release the individual elements contained in the
trans_elem container structure.
No functional change intended.
Followup patch will add 'nelems' member and will turn 'priv' into
a flexible array.
These helpers can then loop over all elements.
Care needs to be taken to handle a mix of new elements and existing
elements that are being updated (e.g. timeout refresh).
Before this patch, NEWSETELEM transaction with update is released
early so nft_trans_set_elem_destroy() won't get called, so we need
to skip elements marked as update.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 4598380f9c ("bonding: fix ns validation on backup slaves")
tried to resolve the issue where backup slaves couldn't be brought up when
receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only
worked for drivers that receive all multicast messages, such as the veth
interface.
For standard drivers, the NS multicast message is silently dropped because
the slave device is not a member of the NS target multicast group.
To address this, we need to make the slave device join the NS target
multicast group, ensuring it can receive these IPv6 NS messages to validate
the slave’s status properly.
There are three policies before joining the multicast group:
1. All settings must be under active-backup mode (alb and tlb do not support
arp_validate), with backup slaves and slaves supporting multicast.
2. We can add or remove multicast groups when arp_validate changes.
3. Other operations, such as enslaving, releasing, or setting NS targets,
need to be guarded by arp_validate.
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmc04UYRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuckgf/RV0zy8gMuzJ/cSk1GDKoOYmEwAZ4JvtW
teAKghsODDW/bng2iKnXphJyx3spZRCNuvOmfPcHsWoResX+vqrKJOaER/3159OF
68xAPZNXPRF4M693IpIUB/P3uTw/jieXPI7ftSPuUOhStca/ALwQd5Lp3kNKkVtq
HipXJwCenVS7Hd8DdHbpvYFUckRWr3tHPFlOgG3qOQOVvfRen2z9rhM14oK9rn+h
f309ATHKTbpTKNagOPYAYcyHs3zE59hlVRgRqHL7Ew0a0HI8uPJ4KK2n5W6tZJFN
swhoQolc1uXrRYlZ3Bdr7mKSIqt557kRz7NJ9ITe7KKCU0CxM/7nhQ==
=v8bS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6
(Jiawei Ye)
- Fix BPF sockmap with kTLS to reject vsock and unix sockets
upon kTLS context retrieval (Zijian Zhang)
- Fix BPF bits iterator selftest for s390x (Hou Tao)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZzQV0BUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIPFywD9Fx9Qc7LdWGmRAmWTqGKSOVPTBC1L
eC/uXop6sLqapP0A/1KsLQmntvXhp+gmxzPEBdwAwb7/DvyPCQV19FZ/sIkA
=lDzI
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann:
- Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6 (Jiawei Ye)
- Fix BPF sockmap with kTLS to reject vsock and unix sockets upon kTLS
context retrieval (Zijian Zhang)
- Fix BPF bits iterator selftest for s390x (Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6
bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx
selftests/bpf: Use -4095 as the bad address for bits iterator
In this commit, we make ip_route_use_hint() return drop reasons. The
drop reasons that we return are similar to what we do in
ip_route_input_slow(), and no drop reasons are added in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In this commit, we make ip_mkroute_input() and __mkroute_input() return
drop reasons.
The drop reason "SKB_DROP_REASON_ARP_PVLAN_DISABLE" is introduced for
the case: the packet which is not IP is forwarded to the in_dev, and
the proxy_arp_pvlan is not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In this commit, we make ip_route_input() return skb drop reasons that come
from ip_route_input_noref().
Meanwhile, adjust all the call to it.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In this commit, we make ip_route_input_noref() return drop reasons, which
come from ip_route_input_rcu().
We need adjust the callers of ip_route_input_noref() to make sure the
return value of ip_route_input_noref() is used properly.
The errno that ip_route_input_noref() returns comes from ip_route_input
and bpf_lwt_input_reroute in the origin logic, and we make them return
-EINVAL on error instead. In the following patch, we will make
ip_route_input() returns drop reasons too.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In this commit, we make ip_route_input_slow() return skb drop reasons,
and following new skb drop reasons are added:
SKB_DROP_REASON_IP_INVALID_DEST
The only caller of ip_route_input_slow() is ip_route_input_rcu(), and we
adjust it by making it return -EINVAL on error.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make ip_mc_validate_source() return drop reason, and adjust the call of
it in ip_route_input_mc().
Another caller of it is ip_rcv_finish_core->udp_v4_early_demux, and the
errno is not checked in detail, so we don't do more adjustment for it.
The drop reason "SKB_DROP_REASON_IP_LOCALNET" is added in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In this commit, we make fib_validate_source() and __fib_validate_source()
return -reason instead of errno on error.
The return value of fib_validate_source can be -errno, 0, and 1. It's hard
to make fib_validate_source() return drop reasons directly.
The fib_validate_source() will return 1 if the scope of the source(revert)
route is HOST. And the __mkroute_input() will mark the skb with
IPSKB_DOREDIRECT in this case (combine with some other conditions). And
then, a REDIRECT ICMP will be sent in ip_forward() if this flag exists. We
can't pass this information to __mkroute_input if we make
fib_validate_source() return drop reasons.
Therefore, we introduce the wrapper fib_validate_source_reason() for
fib_validate_source(), which will return the drop reasons on error.
In the origin logic, LINUX_MIB_IPRPFILTER will be counted if
fib_validate_source() return -EXDEV. And now, we need to adjust it by
checking "reason == SKB_DROP_REASON_IP_RPFILTER". However, this will take
effect only after the patch "net: ip: make ip_route_input_noref() return
drop reasons", as we can't pass the drop reasons from
fib_validate_source() to ip_rcv_finish_core() in this patch.
Following new drop reasons are added in this patch:
SKB_DROP_REASON_IP_LOCAL_SOURCE
SKB_DROP_REASON_IP_INVALID_SOURCE
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The napi_suspend_irqs routine bootstraps irq suspension by elongating
the defer timeout to irq_suspend_timeout.
The napi_resume_irqs routine effectively cancels irq suspension by
forcing the napi to be scheduled immediately.
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://patch.msgid.link/20241109050245.191288-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, rtnl_setlink() and rtnl_dellink() cannot be fully converted
to per-netns RTNL due to a lack of handling peer/lower/upper devices in
different netns.
For example, when we change a device in rtnl_setlink() and need to
propagate that to its upper devices, we want to avoid acquiring all netns
locks, for which we do not know the upper limit.
The same situation happens when we remove a device.
rtnl_dellink() could be transformed to remove a single device in the
requested netns and delegate other devices to per-netns work, and
rtnl_setlink() might be ?
Until we come up with a better idea, let's use a new flag
RTNL_FLAG_DOIT_PERNET_WIP for rtnl_dellink() and rtnl_setlink().
This will unblock converting RTNL users where such devices are not related.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241108004823.29419-11-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In ops->newlink(), veth, vxcan, and netkit call rtnl_link_get_net() with
a net pointer, which is the first argument of ->newlink().
rtnl_link_get_net() could return another netns based on IFLA_NET_NS_PID
and IFLA_NET_NS_FD in the peer device's attributes.
We want to get it and fill rtnl_nets->nets[] in advance in rtnl_newlink()
for per-netns RTNL.
All of the three get the peer netns in the same way:
1. Call rtnl_nla_parse_ifinfomsg()
2. Call ops->validate() (vxcan doesn't have)
3. Call rtnl_link_get_net_tb()
Let's add a new field peer_type to struct rtnl_link_ops and prefetch
netns in the peer ifla to add it to rtnl_nets in rtnl_newlink().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241108004823.29419-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
link_ops is protected by link_ops_mutex and no longer needs RTNL,
so we have no reason to have __rtnl_link_register() separately.
Let's remove it and call rtnl_link_register() from ifb.ko and
dummy.ko.
Note that both modules' init() work on init_net only, so we need
not export pernet_ops_rwsem and can use rtnl_net_lock() there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241108004823.29419-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_link_unregister() holds RTNL and calls synchronize_srcu(),
but rtnl_newlink() will acquire SRCU frist and then RTNL.
Then, we need to unlink ops and call synchronize_srcu() outside
of RTNL to avoid the deadlock.
rtnl_link_unregister() rtnl_newlink()
---- ----
lock(rtnl_mutex);
lock(&ops->srcu);
lock(rtnl_mutex);
sync(&ops->srcu);
Let's move as such and add a mutex to protect link_ops.
Now, link_ops is protected by its dedicated mutex and
rtnl_link_register() no longer needs to hold RTNL.
While at it, we move the initialisation of ops->dellink and
ops->srcu out of the mutex scope.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241108004823.29419-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_link_unregister() holds RTNL and calls __rtnl_link_unregister(),
where we call synchronize_srcu() to wait inflight RTM_NEWLINK requests
for per-netns RTNL.
We put synchronize_srcu() in __rtnl_link_unregister() due to ifb.ko
and dummy.ko.
However, rtnl_newlink() will acquire SRCU before RTNL later in this
series. Then, lockdep will detect the deadlock:
rtnl_link_unregister() rtnl_newlink()
---- ----
lock(rtnl_mutex);
lock(&ops->srcu);
lock(rtnl_mutex);
sync(&ops->srcu);
To avoid the problem, we must call synchronize_srcu() before RTNL in
rtnl_link_unregister().
As a preparation, let's remove __rtnl_link_unregister().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241108004823.29419-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are quite a number of places that use patterns
such as
if (attr)
val = nla_get_u16(attr);
else
val = DEFAULT;
Add nla_get_u16_default() and friends like that to
not have to type this out all the time.
Acked-by: Toke Høiland-Jørgensen <toke@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241108114145.acd2aadb03ac.I3df6aac71d38a5baa1c0a03d0c7e82d4395c030e@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a mapping between a netdev and its neighoburs,
allowing for much cheaper flushes.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241107160444.2913124-7-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove all usage of the bare neighbour::next pointer,
replacing them with neighbour::hash and its for_each macro.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-5-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce neigh_for_each_in_bucket in neighbour.h, to help iterate over
the neighbour table more succinctly.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-3-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a doubly-linked node to neighbours, so that they
can be deleted without iterating the entire bucket they're in.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-2-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MCTP control protocol implementations are transport binding dependent.
Endpoint discovery is mandatory based on transport binding.
Message timing requirements are specified in each respective transport
binding specification.
However, we currently have no means to get this information from MCTP
links.
Add a IFLA_MCTP_PHYS_BINDING netlink link attribute, which represents
the transport type using the DMTF DSP0239-defined type numbers, returned
as part of RTM_GETLINK data.
We get an IFLA_MCTP_PHYS_BINDING attribute for each MCTP link, for
example:
- 0x00 (unspec) for loopback interface;
- 0x01 (SMBus/I2C) for mctpi2c%d interfaces; and
- 0x05 (serial) for mctpserial%d interfaces.
Signed-off-by: Khang Nguyen <khangng@os.amperecomputing.com>
Reviewed-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20241105071915.821871-1-khangng@os.amperecomputing.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the "tos" parameter of ip_route_output() to dscp_t. This way
we'll have a dscp_t value directly available when .flowi4_tos will
eventually be converted to dscp_t.
All ip_route_output() callers but one set this "tos" parameter to 0 and
therefore don't need to be adapted to the new prototype.
Only br_nf_pre_routing_finish() needs conversion. It can just use
ip4h_dscp() to get the DSCP field from the IPv4 header.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/0f10d031dd44c70aae9bc6e19391cb30d5c2fe71.1730928699.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sequence of calls has changed, but the description is inconsistent.
So, fix the description.
Fixes: 188a1bf894 ("wifi: mac80211: re-order assigning channel in activate links")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Link: https://patch.msgid.link/20241101082143.11138-1-kevin_yang@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-----BEGIN PGP SIGNATURE-----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=TkS8
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following series contains Netfilter updates for net-next:
1) Make legacy xtables configs user selectable, from Breno Leitao.
2) Fix a few sparse warnings related to percpu, from Uros Bizjak.
3) Use strscpy_pad, from Justin Stitt.
4) Use nft_trans_elem_alloc() in catchall flush, from Florian Westphal.
5) A series of 7 patches to fix false positive with CONFIG_RCU_LIST=y.
Florian also sees possible issue with 10 while module load/removal
when requesting an expression that is available via module. As for
patch 11, object is being updated so reference on the module already
exists so I don't see any real issue.
Florian says:
"Unfortunately there are many more errors, and not all are false positives.
First patches pass lockdep_commit_lock_is_held() to the rcu list traversal
macro so that those splats are avoided.
The last two patches are real code change as opposed to
'pass the transaction mutex to relax rcu check':
Those two lists are not protected by transaction mutex so could be altered
in parallel.
This targets nf-next because these are long-standing issues."
netfilter pull request 24-11-07
* tag 'nf-next-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: must hold rcu read lock while iterating object type list
netfilter: nf_tables: must hold rcu read lock while iterating expression type list
netfilter: nf_tables: avoid false-positive lockdep splats with basechain hook
netfilter: nf_tables: avoid false-positive lockdep splats in set walker
netfilter: nf_tables: avoid false-positive lockdep splats with flowtables
netfilter: nf_tables: avoid false-positive lockdep splats with sets
netfilter: nf_tables: avoid false-positive lockdep splat on rule deletion
netfilter: nf_tables: prefer nft_trans_elem_alloc helper
netfilter: nf_tables: replace deprecated strncpy with strscpy_pad
netfilter: nf_tables: Fix percpu address space issues in nf_tables_api.c
netfilter: Make legacy configs user selectable
====================
Link: https://patch.msgid.link/20241106234625.168468-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
8c873e2199 ("netfilter: core: free hooks with call_rcu") removed
synchronize_net() call when unregistering basechain hook, however,
net_device removal event handler for the NFPROTO_NETDEV was not updated
to wait for RCU grace period.
Note that 835b803377 ("netfilter: nf_tables_netdev: unregister hooks
on net_device removal") does not remove basechain rules on device
removal, I was hinted to remove rules on net_device removal later, see
5ebe0b0eec ("netfilter: nf_tables: destroy basechain and rules on
netdevice removal").
Although NETDEV_UNREGISTER event is guaranteed to be handled after
synchronize_net() call, this path needs to wait for rcu grace period via
rcu callback to release basechain hooks if netns is alive because an
ongoing netlink dump could be in progress (sockets hold a reference on
the netns).
Note that nf_tables_pre_exit_net() unregisters and releases basechain
hooks but it is possible to see NETDEV_UNREGISTER at a later stage in
the netns exit path, eg. veth peer device in another netns:
cleanup_net()
default_device_exit_batch()
unregister_netdevice_many_notify()
notifier_call_chain()
nf_tables_netdev_event()
__nft_release_basechain()
In this particular case, same rule of thumb applies: if netns is alive,
then wait for rcu grace period because netlink dump in the other netns
could be in progress. Otherwise, if the other netns is going away then
no netlink dump can be in progress and basechain hooks can be released
inmediately.
While at it, turn WARN_ON() into WARN_ON_ONCE() for the basechain
validation, which should not ever happen.
Fixes: 835b803377 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
