Quite alot of buf fixes again:
- Assorted locking, bounds-checking, cleanup, and error-path fixes across
UCMA/CMA, bng_re, bnxt_re, cxgb4, EFA, ERDMA, HFI1, HNS, ionic, iRDMA,
mlx4/mlx5, RXE, SIW, SRP/SRPT, and iSER target.
- netlink report for max # of supported resources
- get_zeroed_page()/etc removal
- Robust udata for ionic
- Allow unique RDMA device names per network namespace
- Completion counters and v2 admit queue support for EFA
- UC QP support for MANA
- Completion timestamps for ionic
- Harden uverbs data validation and resource lifetime handling, fixing several core use-after-free conditions.
- bnxt_re toggle-page ownership and lifetime bug fixes
- dmabuf SRQ support for mlx5
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaoeO2wAKCRCFwuHvBreF
YcyJAQCn8JeqTuayLchCARJX+9fazTaJES9zj41i3M8a7BfxCAEA2b266g0S660m
7eQ761NiIb1iklSl9rmt8vM22EMcngM=
=qcwp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull RDMA updates from Jason Gunthorpe:
"About the normal size, still a lot of AI bug fixes and so on, but some
interesting new functionality too:
- Assorted locking, bounds-checking, cleanup, and error-path fixes
across UCMA/CMA, bng_re, bnxt_re, cxgb4, EFA, ERDMA, HFI1, HNS,
ionic, iRDMA, mlx4/mlx5, RXE, SIW, SRP/SRPT, and iSER target.
- netlink report for max # of supported resources
- get_zeroed_page()/etc removal
- Robust udata for ionic
- Allow unique RDMA device names per network namespace
- Completion counters and v2 admit queue support for EFA
- UC QP support for MANA
- Completion timestamps for ionic
- Harden uverbs data validation and resource lifetime handling,
fixing several core use-after-free conditions.
- bnxt_re toggle-page ownership and lifetime bug fixes
- dmabuf SRQ support for mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (160 commits)
RDMA/ucma: Allow path records to exactly fit the output buffer
RDMA/uverbs: Guard legacy bundles without method_elm
RDMA/efa: Add support for 128B admin v2 SQ entry
RDMA/efa: Generalize the admin SQ
RDMA/efa: Decouple admin command payload from admin header
RDMA/rxe: Fix OOB in free_rd_atomic_resources()
RDMA/cma: Fix WARNING in res_to_rt
RDMA/cxgb4: Free debugfs on registration failure
RDMA/cxgb4: Cancel reg_work before freeing device on remove
RDMA/ucma: Lock the handler in ucma_set_ib_path()
RDMA/ucma: Lock the handler in ucma_write_cm_event()
RDMA/erdma: restrict the driver to little-endian systems
RDMA/ionic: Embed counter driver data in rdma_counter allocation
RDMA/ionic: Cap eq_count to the eth driver's interrupt vector budget
RDMA/siw: Fix use-after-free in siw_accept()
IB/isert: post the full-feature receive buffers after session registration
IB/isert: delay the final Login Response until the session is registered
RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ
RDMA/erdma: Hold QP references for AE and CM processing
RDMA/erdma: Hold CQ references when processing EQ events
...
Each GDMA queue ring is one dma_alloc_coherent() of the whole ring size.
Such high-order allocations fail first under memory fragmentation, so
queue setup can fail with memory still free.
The hardware does not need the ring physically contiguous:
mana_gd_create_dma_region() already maps it as a list of MANA_PAGE_SIZE
(4K) device addresses. Only the driver's linear CPU view needs
contiguity, and it goes through mana_gd_ring_ptr() and
mana_gd_ring_contig_avail(); change both to map offsets onto
scattered pages.
Add a fallback in mana_gd_alloc_memory(): data-path queues pass
allow_scatter=true, so when the contiguous allocation fails the ring is
backed by a vector of scattered PAGE_SIZE (order-0) coherent pages,
presenting the same DMA page-list layout to the device. The HW channel
bootstrap keeps allow_scatter=false, and the debugfs ring dumper reads
scattered rings through the same helpers.
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Link: https://patch.msgid.link/20260807210002.1695263-3-gargaditya@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To support up to 8 packets per CQE, update related CQE processing
code and structures.
Update ethtool handlers to set this feature.
Update per queue stat to show the coalesced CQE counters.
This feature is supported on NIC hardware showing the relevant
PF flag.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260805185404.1052177-1-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On some ARM64 platforms with 4K PAGE_SIZE, page_pool fragment
allocation in the RX refill path can cause 15-20% throughput
regression under high connection counts (>16 TCP streams).
Add an ethtool private flag "full-page-rx" that allows the user to
force one RX buffer per page, bypassing the page_pool fragment path.
This restores line-rate (180+ Gbps) performance on affected platforms.
Usage:
ethtool --set-priv-flags eth0 full-page-rx on
There is no behavioral change by default. The flag must be explicitly
enabled by the user or udev rule.
The existing single-buffer-per-page logic for XDP and jumbo frames is
consolidated into a new helper mana_use_single_rxbuf_per_page() which
is now the single decision point for both the automatic and
user-controlled paths.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20260729063347.3388035-3-dipayanroy@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New HW no longer implements a separate class for latency-sensitive QPs
and advertises this by a new cap bit.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement returning to userspace applications PDNs of created PDs.
The PDN is used by applications that build work requests outside of the
rdma-core code base. The PDN is used to build work requests that require
mentioning the PD. The HW still ensures PD isolation using PDN attached
to MRs and WRs, therefore the PDN mentioned in the work request must match
the PDN of the used work queue. The work requests can fit only 16 bit PDNs.
Allow users to request short PDNs which are 16 bits.
The capability to request short PDN and get PDN is encoded in the response
of alloc user context IOCTL.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/20260717200839.495327-1-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add a per-port debugfs boolean "tx_timeout_skip_reset" that, when
enabled, makes mana_tx_timeout() log the TX timeout and return without
queueing the per-port detach/attach recovery work.
This is a debug-only aid for bringup and qualification: skipping the
recovery reset keeps the device and queue state intact so a TX timeout
can be correlated with hardware telemetry. The knob defaults to false,
so production recovery behaviour is unchanged.
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260710132229.2851441-1-gargaditya@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add Static and Dynamic Interrupt Moderation (DIM) support for
Rx and Tx.
Update queue creation procedure with new data struct with the related
settings.
Add functions to collect stat for DIM, and workers to update DIM data
and settings.
Update ethtool handler to get/set the moderation settings from a user.
To avoid detach/re-attach ops, ring DIM doorbell to change settings
at run time.
By default, adaptive-rx/tx (DIM) are enabled if supported by HW.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260702220123.815018-1-haiyangz@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
MANA allocates RX buffers from page pool fragments when frag_count is
greater than 1. In that case the buffers remain DMA mapped by page pool
and the RX completion path does not call dma_unmap_single(). As a result,
the implicit sync-for-CPU normally performed by dma_unmap_single() is
missing before the packet data is passed to the networking stack.
This breaks RX on configurations which require explicit DMA syncing, for
example when booted with swiotlb=force.
Fix this by recording the page pool page and DMA sync offset when the RX
buffer is allocated, and syncing the received packet range for CPU access
before handing the RX buffer to the stack.
Fixes: 730ff06d3f ("net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.")
Cc: stable@vger.kernel.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Link: https://patch.msgid.link/20260702041237.617719-3-decui@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mana_query_link_cfg() sends an HWC command to firmware on every call,
but the link speed and QoS values it returns only change when the
driver explicitly calls mana_set_bw_clamp(). This function is called
not only by userspace via ethtool get_link_ksettings, but also
periodically by hv_netvsc through netvsc_get_link_ksettings and by
the sysfs speed_show attribute via dev_attr_show, resulting in
unnecessary HWC traffic every few minutes.
Add a link_cfg_error field to mana_port_context to cache the query
result. The field uses three states: 1 (not yet queried, initial
value set during mana_probe_port), 0 (success, speed/max_speed are
valid), or a negative errno for permanent errors like -EOPNOTSUPP
when the hardware does not support the command. Transient errors and
qos_unconfigured responses are not cached so that subsequent calls
will retry.
MANA is ops-locked because it implements net_shaper_ops, so the core
already takes netdev_lock() around all ethtool_ops and net_shaper_ops
entry points. Reuse that lock to serialize mana_query_link_cfg() and
mana_set_bw_clamp(). This prevents a concurrent mana_set_bw_clamp()
from racing with an in-flight query and publishing stale pre-clamp
speed/max_speed.
Invalidate the cache inside mana_set_bw_clamp() on success, so all
current and future callers that change the link configuration
automatically trigger a fresh query on the next mana_query_link_cfg()
call. Also reset link_cfg_error during resume in mana_probe() under
netdev_lock(), so that any query already in flight cannot later
store 0 and silently overwrite the post-resume invalidation.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260606133301.2180073-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the device id table to include the new device id 0x00C1.
This device's BAR layout is similar to VF's, update the function,
mana_gd_init_registers(), accordingly.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260605212302.2135499-1-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the GIC functions to allocate interrupt contexts for RDMA EQs. These
interrupt contexts may be shared with Ethernet EQs when MSI-X vectors
are limited.
The driver now supports allocating dedicated MSI-X for each EQ. Indicate
this capability through driver capability bits. The RDMA EQs pass
use_msi_bitmap=false to share MSI-X vectors with Ethernet, while the
capability flag advertises that the driver supports per-vPort EQ
separation when hardware has sufficient vectors.
Populate eq.irq on all RDMA EQs for consistency with the Ethernet path.
Also relocate the GDMA_DRV_CAP_FLAG_1_HW_VPORT_LINK_AWARE define to its
numeric BIT(6) position among the other capability flags.
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Leon Romanovsky <leon@kernel.org>
Link: https://patch.msgid.link/20260605005717.2059954-7-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use GIC functions to create a dedicated interrupt context or acquire a
shared interrupt context for each EQ when setting up a vPort.
The caller now owns the GIC reference across the EQ create/destroy
lifecycle: mana_create_eq() calls mana_gd_get_gic() before creating
each EQ and mana_destroy_eq() calls mana_gd_put_gic() after destroying
it. The msix_index invalidation is moved from mana_gd_deregister_irq()
to the mana_gd_create_eq() error path so that mana_destroy_eq() can
read the index before teardown.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-6-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To allow Ethernet EQs to use dedicated or shared MSI-X vectors and RDMA
EQs to share the same MSI-X, introduce a GIC (GDMA IRQ Context) with
reference counting. This allows the driver to create an interrupt context
on an assigned or unassigned MSI-X vector and share it across multiple
EQ consumers.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-4-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When querying the device, adjust the max number of queues to allow
dedicated MSI-X vectors for each vPort. The per-vPort queue count is
clamped towards MANA_DEF_NUM_QUEUES but will not exceed the hardware
maximum reported by the device.
MSI-X sharing among vPorts is enabled when there are not enough MSI-X
vectors for dedicated allocation, or when the platform does not support
dynamic MSI-X allocation (in which case all vectors are pre-allocated
at probe time and sharing is always used). The msi_sharing flag is
reset at the top of mana_gd_query_max_resources() so it is recomputed
from current hardware state on each probe or resume cycle.
Clamp apc->max_queues to gc->max_num_queues_vport in mana_init_port()
so that on resume, if max_num_queues_vport has decreased due to fewer
MSI-X vectors, num_queues is reduced accordingly before EQ allocation.
A device reporting zero ports now results in a fatal probe error since
the per-vPort MSI-X math requires at least one port.
Rename mana_query_device_cfg() to mana_gd_query_device_cfg() as it is
used at GDMA device probe time for querying device capabilities.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-3-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To prepare for assigning vPorts to dedicated MSI-X vectors, remove EQ
sharing among the vPorts and create dedicated EQs for each vPort.
Move the EQ definition from struct mana_context to struct mana_port_context
and update related support functions. Export mana_create_eq() and
mana_destroy_eq() for use by the MANA RDMA driver.
RSS QPs now take a vport reference via pd->vport_use_count to ensure
EQs outlive all QP consumers. The vport must already be configured by
a raw QP before an RSS QP can be created. EQs are only destroyed when
the last QP (raw or RSS) on the PD releases its reference.
Restrict each vport to a single RSS QP. The hardware only supports one
steering configuration (indirection table / hash key) per vport, and
mana_disable_vport_rx() on QP destroy disables RX globally for the
vport. Previously, creating a second RSS QP would silently overwrite
the first QP's steering config and destroy would blackhole all traffic.
This is now explicitly rejected with -EBUSY. Existing applications
(DPDK being the primary RDMA consumer) always create one RSS QP per
vport, so no real-world flows are affected.
Reject cross-port PD sharing for both raw and RSS QPs. Since EQs and
vport configuration are per-port, a PD is bound to the port used by
its first raw QP. Subsequent QPs on the same PD must use the same
port or the creation fails with -EINVAL. Previously this was silently
broken: with shared EQs it appeared to work, but with per-vPort EQs
a cross-port PD would cause wrong-port EQ teardown and corruption.
DPDK creates one PD per port so no existing flows are affected.
Serialize mana_set_channels() and the async per-port queue reset
handler against RDMA vport configuration to prevent RDMA from claiming
the vport during the detach/attach window. A channel_changing flag is
set under apc->vport_mutex before detach and checked by
mana_cfg_vport() when called from the RDMA path, blocking RDMA from
grabbing the vport during the entire window. When the port is down
and RDMA already holds the vport, the channel change is rejected with
-EBUSY.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-2-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add debugfs entries to expose hardware configuration and diagnostic
information that aids in debugging driver initialization and runtime
operations without adding noise to dmesg.
The debugfs directory for each PCI device is named using pci_name()
(the unique BDF address), and its creation and removal is integrated
into mana_gd_setup() and mana_gd_cleanup_device() respectively, so
that all callers (probe, remove, suspend, resume, shutdown) share a
single code path.
Device-level entries (under /sys/kernel/debug/mana/<BDF>/):
- num_msix_usable, max_num_queues: Max resources from hardware
- gdma_protocol_ver, pf_cap_flags1: VF version negotiation results
- num_vports, bm_hostmode: Device configuration
Per-vPort entries (under /sys/kernel/debug/mana/<BDF>/vportN/):
- port_handle: Hardware vPort handle
- max_sq, max_rq: Max queues from vPort config
- indir_table_sz: Indirection table size
- steer_rx, steer_rss, steer_update_tab, steer_cqe_coalescing:
Last applied steering configuration parameters
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260519064621.772154-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert tx_qp from a single contiguous array allocation to per-queue
individual allocations. Each mana_tx_qp struct is approximately 35KB.
With many queues (e.g., 32/64), the flat array requires a single
contiguous allocation that can fail under memory fragmentation.
Change mana_tx_qp *tx_qp to mana_tx_qp **tx_qp (array of pointers),
allocating each queue's mana_tx_qp individually via kvzalloc. This
reduces each allocation to ~35KB and provides vmalloc fallback,
avoiding allocation failure due to fragmentation.
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260502074552.23857-2-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Usual collection of driver changes, more core infrastructure updates that
typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa, ocrdma,
erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in core
- Promote UMEM to a core component, split out DMA block iterator logic
- Introduce FRMR pools with aging, statistics, pinned handles, and netlink
control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
- Fixes:
IB/core zero dmac neighbor resolution race
GID table memory free
rxe pad/ICRC validation and r_key async errors
mlx4 external umem for CQ
umem DMA attributes on unmap
mana_ib RX steering on RSS QP destroy
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaeJyjAAKCRCFwuHvBreF
YXWOAQDZz7buqUgw45ufFMcClAfnIYeAIb0dlD5vnltvbIkUFgEAmOabYPZk0PHY
NlmfFBmWmIYXwgMHfYPlN1xYN/+Fjww=
=dd92
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"The usual collection of driver changes, more core infrastructure
updates that typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa,
ocrdma, erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in
core
- Promote UMEM to a core component, split out DMA block iterator
logic
- Introduce FRMR pools with aging, statistics, pinned handles, and
netlink control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in
irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
Fixes:
- IB/core zero dmac neighbor resolution race
- GID table memory free
- rxe pad/ICRC validation and r_key async errors
- mlx4 external umem for CQ
- umem DMA attributes on unmap
- mana_ib RX steering on RSS QP destroy"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (116 commits)
RDMA/core: Fix user CQ creation for drivers without create_cq
RDMA/ionic: bound node_desc sysfs read with %.64s
IB/core: Fix zero dmac race in neighbor resolution
RDMA/mana_ib: Support memory windows
RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
RDMA/core: Prefer NLA_NUL_STRING
RDMA/core: Fix memory free for GID table
RDMA/hns: Remove the duplicate calls to ib_copy_validate_udata_in()
RDMA: Remove redundant = {} for udata req structs
RDMA/irdma: Add missing comp_mask check in alloc_ucontext
RDMA/hns: Add missing comp_mask check in create_qp
RDMA/mlx5: Pull comp_mask validation into ib_copy_validate_udata_in_cm()
RDMA: Use ib_copy_validate_udata_in_cm() for zero comp_mask
RDMA/hns: Use ib_copy_validate_udata_in()
RDMA/mlx4: Use ib_copy_validate_udata_in() for QP
RDMA/mlx4: Use ib_copy_validate_udata_in()
RDMA/mlx5: Use ib_copy_validate_udata_in() for MW
RDMA/mlx5: Use ib_copy_validate_udata_in() for SRQ
RDMA/pvrdma: Use ib_copy_validate_udata_in() for srq
RDMA: Use ib_copy_validate_udata_in() for implicit full structs
...
Implement .alloc_mw() and .dealloc_mw() for mana device.
This is just the basic infrastructure, MW is not practically usable until
additional kernel support for allowing user space to submit MW work
requests is completed.
Link: https://patch.msgid.link/r/20260331090851.2276205-1-kotaranov@linux.microsoft.com
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss()
destroys the RX WQ objects but does not disable vPort RX steering in
firmware. This leaves stale steering configuration that still points to
the destroyed RX objects.
If traffic continues to arrive (e.g. peer VM is still transmitting) and
the VF interface is subsequently brought up (mana_open), the firmware
may deliver completions using stale CQ IDs from the old RX objects.
These CQ IDs can be reused by the ethernet driver for new TX CQs,
causing RX completions to land on TX CQs:
WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false)
WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails)
Fix this by disabling vPort RX steering before destroying RX WQ objects.
Note that mana_fence_rqs() cannot be used here because the fence
completion is delivered on the CQ, which is polled by user-mode (e.g.
DPDK) and not visible to the kernel driver.
Refactor the disable logic into a shared mana_disable_vport_rx() in
mana_en, exported for use by mana_ib, replacing the duplicate code.
The ethernet driver's mana_dealloc_queues() is also updated to call
this common function.
Fixes: 0266a17763 ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Cc: stable@vger.kernel.org
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260325194100.1929056-1-longli@microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Set the default number of queues per vPort to MANA_DEF_NUM_QUEUES (16),
as 16 queues can achieve optimal throughput for typical workloads. The
actual number of queues may be lower if it exceeds the hardware reported
limit. Users can increase the number of queues up to max_queues via
ethtool if needed.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260323194925.1766385-1-longli@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For RX CQEs with type CQE_RX_COALESCED_4, to measure the coalescing
efficiency, add counters to count how many contains 2, 3, 4 packets
respectively.
Also, add a counter for the error case of first packet with length == 0.
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260317191826.1346111-4-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Our NIC can have up to 4 RX packets on 1 CQE. To support this feature,
check and process the type CQE_RX_COALESCED_4. The default setting is
disabled, to avoid possible regression on latency.
And, add ethtool handler to switch this feature. To turn it on, run:
ethtool -C <nic> rx-cqe-frames 4
To turn it off:
ethtool -C <nic> rx-cqe-frames 1
The rx-cqe-nsec is the time out value in nanoseconds after the first
packet arrival in a coalesced CQE to be sent. It's read-only for this
NIC.
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260317191826.1346111-3-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a part of MANA hardening for CVM, add validation for the doorbell
ID (db_id) received from hardware in the GDMA_REGISTER_DEVICE response
to prevent out-of-bounds memory access when calculating the doorbell
page address.
In mana_gd_ring_doorbell(), the doorbell page address is calculated as:
addr = db_page_base + db_page_size * db_index
= (bar0_va + db_page_off) + db_page_size * db_index
A hardware could return values that cause this address to fall outside
the BAR0 MMIO region. In Confidential VM environments, hardware responses
cannot be fully trusted.
Add the following validations:
- Store the BAR0 size (bar0_size) in gdma_context during probe.
- Validate the doorbell page offset (db_page_off) read from device
registers does not exceed bar0_size during initialization, converting
mana_gd_init_registers() to return an error code.
- Validate db_id from GDMA_REGISTER_DEVICE response against the
maximum number of doorbell pages that fit within BAR0.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260306211212.543376-1-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The GF stats periodic query is used as mechanism to monitor HWC health
check. If this HWC command times out, it is a strong indication that
the device/SoC is in a faulty state and requires recovery.
Today, when a timeout is detected, the driver marks
hwc_timeout_occurred, clears cached stats, and stops rescheduling the
periodic work. However, the device itself is left in the same failing
state.
Extend the timeout handling path to trigger the existing MANA VF
recovery service by queueing a GDMA_EQE_HWC_RESET_REQUEST work item.
This is expected to initiate the appropriate recovery flow by suspende
resume first and if it fails then trigger a bus rescan.
This change is intentionally limited to HWC command timeouts and does
not trigger recovery for errors reported by the SoC as a normal command
response.
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aaFShvKnwR5FY8dH@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Usual smallish cycle:
- Various code improvements in irdma, rtrs, qedr, ocrdma, irdma, rxe
- Small driver improvements and minor bug fixes to hns, mlx5, rxe, mana,
mlx5, irdma
- Robusness improvements in completion processing for EFA
- New query_port_speed() verb to move past limited IBA defined speed steps
- Support for SG_GAPS in rts and many other small improvements
- Rare list corruption fix in iwcm
- Better support different page sizes in rxe
- Device memory support for mana
- Direct bio vec to kernel MR for use by NFS-RDMA
- QP rate limiting for bnxt_re
- Remote triggerable NULL pointer crash in siw
- DMA-buf exporter support for RDMA mmaps like doorbells
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaY44vgAKCRCFwuHvBreF
YfiZAP91cMZfogN7r1FMD75xDZu55dI3Jvy8OaixyRxlWLGPcQEAjritdL0o7fZp
YrD1OXNS/1XG//rPBVw7xj+54Aa8hAU=
=AVcu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual smallish cycle. The NFS biovec work to push it down into RDMA
instead of indirecting through a scatterlist is pretty nice to see,
been talked about for a long time now.
- Various code improvements in irdma, rtrs, qedr, ocrdma, irdma, rxe
- Small driver improvements and minor bug fixes to hns, mlx5, rxe,
mana, mlx5, irdma
- Robusness improvements in completion processing for EFA
- New query_port_speed() verb to move past limited IBA defined speed
steps
- Support for SG_GAPS in rts and many other small improvements
- Rare list corruption fix in iwcm
- Better support different page sizes in rxe
- Device memory support for mana
- Direct bio vec to kernel MR for use by NFS-RDMA
- QP rate limiting for bnxt_re
- Remote triggerable NULL pointer crash in siw
- DMA-buf exporter support for RDMA mmaps like doorbells"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/mlx5: Implement DMABUF export ops
RDMA/uverbs: Add DMABUF object type and operations
RDMA/uverbs: Support external FD uobjects
RDMA/siw: Fix potential NULL pointer dereference in header processing
RDMA/umad: Reject negative data_len in ib_umad_write
IB/core: Extend rate limit support for RC QPs
RDMA/mlx5: Support rate limit only for Raw Packet QP
RDMA/bnxt_re: Report QP rate limit in debugfs
RDMA/bnxt_re: Report packet pacing capabilities when querying device
RDMA/bnxt_re: Add support for QP rate limiting
MAINTAINERS: Drop RDMA files from Hyper-V section
RDMA/uverbs: Add __GFP_NOWARN to ib_uverbs_unmarshall_recv() kmalloc
svcrdma: use bvec-based RDMA read/write API
RDMA/core: add rdma_rw_max_sge() helper for SQ sizing
RDMA/core: add MR support for bvec-based RDMA operations
RDMA/core: use IOVA-based DMA mapping for bvec RDMA operations
RDMA/core: add bio_vec based RDMA read/write API
RDMA/irdma: Use kvzalloc for paged memory DMA address array
RDMA/rxe: Fix race condition in QP timer handlers
RDMA/mana_ib: Add device‑memory support
...
Introduce a basic DM implementation that enables creating and
registering device memory, and using the associated memory keys
for networking operations.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/20260127082649.429018-1-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement .ndo_tx_timeout for MANA so any stalled TX queue can be detected
and a device-controlled port reset for all queues can be scheduled to a
ordered workqueue. The reset for all queues on stall detection is
recomended by hardware team.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20260112130552.GA11785@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When MANA is being probed, it's possible that hardware is in recovery
mode and the device may get GDMA_EQE_HWC_RESET_REQUEST over HWC in the
middle of the probe. Detect such condition and go through the recovery
service procedure.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1764193552-9712-1-git-send-email-longli@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MANA hardware supports a maximum of 30 scatter-gather entries (SGEs)
per TX WQE. Exceeding this limit can cause TX failures.
Add ndo_features_check() callback to validate SKB layout before
transmission. For GSO SKBs that would exceed the hardware SGE limit, clear
NETIF_F_GSO_MASK to enforce software segmentation in the stack.
Add a fallback in mana_start_xmit() to linearize non-GSO SKBs that still
exceed the SGE limit.
Also, Add ethtool counter for SKBs linearized
Co-developed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1763464269-10431-2-git-send-email-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report standard counter stats->rx_missed_errors
using hc_rx_discards_no_wqe from the hardware.
Add a global workqueue to periodically run
mana_query_gf_stats every 2 seconds to get the latest
info in eth_stats and define a driver capability flag
to notify hardware of the periodic queries.
To avoid repeated failures and log flooding, the workqueue
is not rescheduled if mana_query_gf_stats fails on HWC timeout
error and the stats are reset to 0. Other errors are transient
which will not need a VF reset for recovery.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1763120599-6331-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move hardware counter (HC) statistics from mana_port_context to
mana_context to enable sharing stats across multiple network ports
on the same MANA VF. Previously, each network port queried
hardware counters independently using MANA_QUERY_GF_STAT command
(GF = Generic Function stats from GDMA hardware), resulting in
redundant queries when multiple ports existed on the same device.
Isolate hardware counter stats by introducing mana_ethtool_hc_stats
in mana_context and update the code to ensure all stats are properly
reported via ethtool -S <interface>, maintaining consistency with
previous behavior.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1763120599-6331-2-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Handle the NIC hardware link state events received from the HW
channel, then set the proper link state accordingly.
And, add a feature bit, GDMA_DRV_CAP_FLAG_1_HW_VPORT_LINK_AWARE,
to inform the NIC hardware this handler exists.
Our MANA NIC only sends out the link state down/up messages
when we need to let the VM rerun DHCP client and change IP
address. So, add netif_carrier_on() in the probe(), let the NIC
show the right initial state in /sys/class/net/ethX/operstate.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1761770601-16920-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch enhances RX buffer handling in the mana driver by allocating
pages from a page pool and slicing them into MTU-sized fragments, rather
than dedicating a full page per packet. This approach is especially
beneficial on systems with large base page sizes like 64KB.
Key improvements:
- Proper integration of page pool for RX buffer allocations.
- MTU-sized buffer slicing to improve memory utilization.
- Reduce overall per Rx queue memory footprint.
- Automatic fallback to full-page buffers when:
* Jumbo frames are enabled (MTU > PAGE_SIZE / 2).
* The XDP path is active, to avoid complexities with fragment reuse.
Testing on VMs with 64KB pages shows around 200% throughput improvement.
Memory efficiency is significantly improved due to reduced wastage in page
allocations. Example: We are now able to fit 35 rx buffers in a single 64kb
page for MTU size of 1500, instead of 1 rx buffer per page previously.
Tested:
- iperf3, iperf2, and nttcp benchmarks.
- Jumbo frames with MTU 9000.
- Native XDP programs (XDP_PASS, XDP_DROP, XDP_TX, XDP_REDIRECT) for
testing the XDP path in driver.
- Memory leak detection (kmemleak).
- Driver load/unload, reboot, and stress scenarios.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20250814140410.GA22089@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Upon receiving the Reset Request, pause the connection and clean up
queues, wait for the specified period, then resume the NIC.
In the cleanup phase, the HWC is no longer responding, so set hwc_timeout
to zero to skip waiting on the response.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1751055983-29760-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If any of the HWC commands are not recognized by the
underlying hardware, the hardware returns the response
header status of -1. Log the information using
netdev_info_once to avoid multiple error logs in dmesg.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-5-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.
The driver retrieves this information by issuing a
HWC command to the hardware via mana_query_link_cfg(),
which retrieves the SKU's maximum supported speed.
These APIs when invoked on hardware that are older/do
not support these APIs, the speed would be reported as UNKNOWN.
Before:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
After:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 16000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for net_shaper_ops in the MANA driver,
enabling configuration of rate limiting on the MANA NIC.
To apply rate limiting, the driver issues a HWC command via
mana_set_bw_clamp() and updates the corresponding shaper object
in the net_shaper cache. If an error occurs during this process,
the driver restores the previous speed by querying the current link
configuration using mana_query_link_cfg().
The minimum supported bandwidth is 100 Mbps, and only values that are
exact multiples of 100 Mbps are allowed. Any other values are rejected.
To remove a shaper, the driver resets the bandwidth to the maximum
supported by the SKU using mana_set_bw_clamp() and clears the
associated cache entry. If an error occurs during this process,
the shaper details are retained.
On the hardware that does not support these APIs, the net-shaper
calls to set speed would fail.
Set the speed:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do set --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' },
"bw-max": 200000000 }'
Get the shaper details:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do get --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' }}'
> {'bw-max': 200000000,
> 'handle': {'scope': 'netdev'},
> 'ifindex': $IFINDEX,
> 'metric': 'bps'}
Delete the shaper object:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do delete --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev","id":'$ID' }}'
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shradha Gupta says:
====================
Allow dyn MSI-X vector allocation of MANA
In this patchset we want to enable the MANA driver to be able to
allocate MSI-X vectors in PCI dynamically.
The first patch exports pci_msix_prepare_desc() in PCI to be able to
correctly prepare descriptors for dynamically added MSI-X vectors.
The second patch adds the support of dynamic vector allocation in
pci-hyperv PCI controller by enabling the MSI_FLAG_PCI_MSIX_ALLOC_DYN
flag and using the pci_msix_prepare_desc() exported in first patch.
The third patch adds a detailed description of the irq_setup(), to
help understand the function design better.
The fourth patch is a preparation patch for mana changes to support
dynamic IRQ allocation. It contains changes in irq_setup() to allow
skipping first sibling CPU sets, in case certain IRQs are already
affinitized to them.
The fifth patch has the changes in MANA driver to be able to allocate
MSI-X vectors dynamically. If the support does not exist it defaults to
older behavior.
* 'shradha_v6.16-rc1' of https://github.com/shradhagupta6/linux:
net: mana: Allocate MSI-X vectors dynamically
net: mana: Allow irq_setup() to skip cpus for affinity
net: mana: explain irq_setup() algorithm
PCI: hv: Allow dynamic MSI-X vector allocation
PCI/MSI: Export pci_msix_prepare_desc() for dynamic MSI-X allocations
====================
Link: https://patch.msgid.link/1749650984-9193-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the MANA driver allocates MSI-X vectors statically based on
MANA_MAX_NUM_QUEUES and num_online_cpus() values and in some cases ends
up allocating more vectors than it needs. This is because, by this time
we do not have a HW channel and do not know how many IRQs should be
allocated.
To avoid this, we allocate 1 MSI-X vector during the creation of HWC and
after getting the value supported by hardware, dynamically add the
remaining MSI-X vectors.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
To collaborate with hardware servicing events, upon receiving the special
EQE notification from the HW channel, remove the devices on this bus.
Then, after a waiting period based on the device specs, rescan the parent
bus to recover the devices.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1749834034-18498-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for reporting additional hardware counters for drop and
TC using the ethtool -S interface.
These counters include:
- Aggregate Rx/Tx drop counters
- Per-TC Rx/Tx packet counters
- Per-TC Rx/Tx byte counters
- Per-TC Rx/Tx pause frame counters
The counters are exposed using ethtool_ops->get_ethtool_stats and
ethtool_ops->get_strings. This feature/counters are not available
to all versions of hardware.
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20250609100103.GA7102@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Usual collection of driver fixes:
- Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw
- Further ODP functionality in rxe
- Remote access MRs in mana, along with more page sizes
- Improve CM scalability with a rwlock around the agent
- More trace points for hns
- ODP hmm conversion to the new two step dma API
- Support the ethernet HW device in mana as well as the RNIC
- Cleanups:
* Use secs_to_jiffies() when appropriate
* Use ERR_CAST() instead of naked casts
* Don't use %pK in printk
* Unusued functions removed
* Allocation type matching
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaDm95gAKCRCFwuHvBreF
YXJxAQCZ+p+mxt0rTeVI2j6YQ26thuvb/tH0Upu8epgdQ3T/ZgD/YOHBC6OrXWJa
Uz6BTiyz/xiyMtJLTD4kEiG2o74J1gE=
=DNQC
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual collection of driver fixes:
- Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw
- Further ODP functionality in rxe
- Remote access MRs in mana, along with more page sizes
- Improve CM scalability with a rwlock around the agent
- More trace points for hns
- ODP hmm conversion to the new two step dma API
- Support the ethernet HW device in mana as well as the RNIC
- Cleanups:
- Use secs_to_jiffies() when appropriate
- Use ERR_CAST() instead of naked casts
- Don't use %pK in printk
- Unusued functions removed
- Allocation type matching"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (57 commits)
RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work
RDMA/bnxt_re: Support extended stats for Thor2 VF
RDMA/hns: Fix endian issue in trace events
RDMA/mlx5: Avoid flexible array warning
IB/cm: Remove dead code and adjust naming
RDMA/core: Avoid hmm_dma_map_alloc() for virtual DMA devices
RDMA/rxe: Break endless pagefault loop for RO pages
RDMA/bnxt_re: Fix return code of bnxt_re_configure_cc
RDMA/bnxt_re: Fix missing error handling for tx_queue
RDMA/bnxt_re: Fix incorrect display of inactivity_cp in debugfs output
RDMA/mlx5: Add support for 200Gbps per lane speeds
RDMA/mlx5: Remove the redundant MLX5_IB_STAGE_UAR stage
RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction
net: mana: Add support for auxiliary device servicing events
RDMA/mana_ib: unify mana_ib functions to support any gdma device
RDMA/mana_ib: Add support of mana_ib for RNIC and ETH nic
net: mana: Probe rdma device in mana driver
RDMA/siw: replace redundant ternary operator with just rv
RDMA/umem: Separate implicit ODP initialization from explicit ODP
RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage
...
To support Multi Vports on Bare metal, increase the device config response
version. And, skip the register HW vport, and register filter steps, when
the Bare metal hostmode is set.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1747671636-5810-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Handle soc servicing events which require the rdma auxiliary device resources to
be cleaned up during a suspend, and re-initialized during a resume.
Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1746633545-17653-5-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
