Merge assorted ACPI support fixes for 7.1-rc2:
- Fix EINJV2 memory error injection in APEI (Tony Luck)
- Add missing notifier_block structure forward declaration to
acpi_bus.h (Bartosz Golaszewski)
- Fix related_cpus inconsistency during CPU hotplug in the ACPI CPPC
library (Jinjie Ruan)
- Add a quirk to force native backlight on HP OMEN 16 (8A44) in the
ACPI video bus driver (Shivam Kalra)
* acpi-apei:
ACPI: APEI: EINJ: Fix EINJV2 memory error injection
ACPICA: Provide #defines for EINJV2 error types
* acpi-bus:
ACPI: bus: add missing forward declaration to acpi_bus.h
* acpi-cppc:
ACPI: CPPC: Fix related_cpus inconsistency during CPU hotplug
* acpi-video:
ACPI: video: force native backlight on HP OMEN 16 (8A44)
The header references struct notifier_block but neither includes
linux/notifier.h nor contains the relevant forward declaration.
Add the latter for correctness.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
[ rjw: Subject tweak ]
Link: https://patch.msgid.link/20260427112238.132419-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
EINJV2 defined new error types by moving the severity (correctable,
uncorrectable non-fatal, uncorrectable fatal) out of the "type".
ACPI 6.5 introduced EINJV2 and defined a vendor defined error type
using bit 31. This was dropped in ACPI 6.6.
Link: https://github.com/acpica/acpica/commit/e82d2d2fd145
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260421150216.11666-2-tony.luck@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic EPP,
Raw EPP, and new unit tests for them to amd-pstate (Gautham Shenoy,
Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate which
leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add a
boost_freq_req QoS request to save the boost constraint instead of
overwriting the last scaling_max_freq constraint (Pierre Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is written
to its status sysfs attribute while the driver is already off (Fabio
De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping core
code (Randy Dunlap)
- Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)
- Use _visible attribute to replace create/remove_sysfs_files() in
devfreq (Pengjie Zhang)
- Add Tegra114 support to activity monitor device in tegra30-devfreq as
a preparation to upcoming EMC controller support (Svyatoslav Ryhel)
- Fix mistakes in cpupower man pages, add the boost and epp options to
the cpupower-frequency-info man page, and add the perf-bias option to
the cpupower-info man page (Roberto Ricci)
- Remove unnecessary extern declarations from getopt.h in arguments
parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmnY9TISHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1G9gH/j5mEqfPpiwX6fQ/ZwOGdNOOPVA5w9j4
KPHSMwMD5lZkoaZfasp2vt27KY5SOoVVvRZ2DKkFJ3Jai4I3cUPZYypga2nre1ag
tgzX4vOjcw2r40Eda6ezWl1h4mca/xJJBX7xH2+hn1JY+Y1in37g50CqMIjKh96z
Uugkk6UZytL1XcF55PMhIUgDf6pDtRT5UOW9xOKOkUt8FVWTJ7ei3HaWyV5kDmVq
b5eQ42+OH7y6sWNnoKczFd8fStvh6J/avoJurBEvcOQhMcjaIaB48G19+KjDg73E
NjrVcgG20P2rltBvV2d0J1TKskZHkaP7XjIeWfkwjGZhee3FL7ssS/g=
=fRCO
-----END PGP SIGNATURE-----
Merge tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, cpufreq is the most active development area, mostly
because of the new feature additions and documentation updates in the
amd-pstate driver, but there are also changes in the cpufreq core
related to boost support and other assorted updates elsewhere.
Next up are power capping changes due to the major cleanup of the
Intel RAPL driver.
On the cpuidle front, a new C-states table for Intel Panther Lake is
added to the intel_idle driver, the stopped tick handling in the menu
and teo governors is updated, and there are a couple of cleanups.
Apart from the above, support for Tegra114 is added to devfreq and
there are assorted cleanups of that code, there are also two updates
of the operating performance points (OPP) library, two minor updates
related to hibernation, and cpupower utility man pages updates and
cleanups.
Specifics:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic
EPP, Raw EPP, and new unit tests for them to amd-pstate (Gautham
Shenoy, Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate
which leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add
a boost_freq_req QoS request to save the boost constraint instead
of overwriting the last scaling_max_freq constraint (Pierre
Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury
Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is
written to its status sysfs attribute while the driver is already
off (Fabio De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto
Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping
core code (Randy Dunlap)
- Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)
- Use _visible attribute to replace create/remove_sysfs_files() in
devfreq (Pengjie Zhang)
- Add Tegra114 support to activity monitor device in tegra30-devfreq
as a preparation to upcoming EMC controller support (Svyatoslav
Ryhel)
- Fix mistakes in cpupower man pages, add the boost and epp options
to the cpupower-frequency-info man page, and add the perf-bias
option to the cpupower-info man page (Roberto Ricci)
- Remove unnecessary extern declarations from getopt.h in arguments
parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)"
* tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
cpupower: remove extern declarations in cmd functions
cpuidle: Simplify cpuidle_register_device() with guard()
PM / devfreq: tegra30-devfreq: add support for Tegra114
PM / devfreq: use _visible attribute to replace create/remove_sysfs_files()
PM / devfreq: Remove unneeded casting for HZ_PER_KHZ
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
...
Merge ACPI APEI updates for 7.1-rc1:
- Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
Feng)
* acpi-apei:
ACPI: APEI: GHES: Add NVIDIA vendor CPER record handler
PCI: hisi: Use devm_ghes_register_vendor_record_notifier()
ACPI: APEI: GHES: Add devm_ghes_register_vendor_record_notifier()
Merge ACPI core driver core driver updates and assorted driver updates
related to ACPI support for 7.1-rc1:
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
Wysocki)
- Update the ACPI core device drivers to stop setting acpi_device_name()
unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
bind to platform devices instead of ACPI devices (Rafael Wysocki)
* acpi-driver:
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: AC: Define ACPI_AC_CLASS in one place
ACPI: driver: Do not set acpi_device_class() unnecessarily
ACPI: driver: Avoid using pnp.device_class for netlink handling
ACPI: event: Redefine acpi_notifier_call_chain()
ACPI: driver: Do not set acpi_device_name() unnecessarily
ACPI: video: Consolidate pnp.bus_id workarounds handling
ACPI: video: Rework checking for duplicate video bus devices
driver core: auxiliary bus: Introduce dev_is_auxiliary()
ACPI: PAD: Rearrange notify handler installation and removal
ACPI: AC: Get rid of unnecessary declarations
Merge updates related to the CMOS RTC driver and x86/ACPI CMOS RTC
support for 7.1-rc1:
- Add ACPI support to the platform device interface in the CMOS RTC
driver, make the ACPI core device enumeration code create a platform
device for the CMOS RTC, and drop CMOS RTC PNP device support (Rafael
Wysocki)
- Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
driver and clean up the CMOS RTC ACPI address space handler (Rafael
Wysocki)
- Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
and allow that driver to work without a dedicated IRQ if the ACPI
alarm is used (Rafael Wysocki)
* acpi-cmos-rtc:
rtc: cmos: Do not require IRQ if ACPI alarm is used
rtc: cmos: Enable ACPI alarm if advertised in ACPI FADT
ACPI: TAD/x86: cmos_rtc: Consolidate address space handler setup
rtc: cmos: Drop PNP device support
x86: rtc: Drop PNP device check
ACPI: PNP: Drop CMOS RTC PNP device support
ACPI: x86/rtc-cmos: Use platform device for driver binding
ACPI: x86: cmos_rtc: Create a CMOS RTC platform device
ACPI: x86: cmos_rtc: Improve coordination with ACPI TAD driver
ACPI: x86: cmos_rtc: Clean up address space handler driver
Add a device-managed wrapper around ghes_register_vendor_record_notifier()
so drivers can avoid manual cleanup on device removal or probe failure.
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://patch.msgid.link/20260330094203.38022-2-kaihengf@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On AMD Ryzen Embedded V1780B (Family 17h, Zen 1), the BIOS does not
provide ACPI _CPC objects and the CPU does not support MSR-based CPPC
(X86_FEATURE_CPPC). The _PSS table only lists nominal P-states
(P0 = 3350 MHz), so when get_max_boost_ratio() fails at
cppc_get_perf_caps(), cpuinfo_max_freq reports only the base frequency
instead of the rated boost frequency (3600 MHz).
dmesg:
ACPI CPPC: No CPC descriptor for CPU:0
acpi_cpufreq: CPU0: Unable to get performance capabilities (-19)
cppc-cpufreq already has a DMI fallback (cppc_get_dmi_max_khz()) that
reads the processor max speed from SMBIOS Type 4. Export it and reuse
it in acpi-cpufreq as a last-resort source for the boost frequency.
A sanity check ensures the DMI value is above the _PSS P0 frequency
and within 2x of it; values outside that range are ignored and the
existing arch_set_max_freq_ratio() path is taken instead. The 2x
upper bound is based on a survey of the AMD Ryzen Embedded V1000
series, where the highest boost-to-base ratio is 1.8x (V1404I:
2.0 GHz base / 3.6 GHz boost).
The DMI lookup and sanity check are wrapped in a helper,
acpi_cpufreq_resolve_max_freq(), which falls through to
arch_set_max_freq_ratio() if the DMI value is absent or
out of range.
Tested on AMD Ryzen Embedded V1780B with v7.0-rc4:
Before: cpuinfo_max_freq = 3350000 (base only)
After: cpuinfo_max_freq = 3600000 (includes boost)
Link: https://www.amd.com/en/products/embedded/ryzen/ryzen-v1000-series.html#specifications
Signed-off-by: Henry Tseng <henrytseng@qnap.com>
Link: https://patch.msgid.link/20260324090948.1667340-1-henrytseng@qnap.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI_AC_CLASS symbol is defined in several places in the same way
which is rather unfortunate.
Instead, define it in one common header file (acpi_bus.h) so that it is
accessible to all of its users.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/6163384.MhkbZ0Pkbq@rafael.j.wysocki
Several core ACPI device drivers set acpi_device_class() for the given
struct acpi_device to whatever they like, but that value is never used
unless the driver itself uses it and, sadly, they neglect to clear it on
remove. Since the only one of them still using acpi_device_class()
after previous changes is the button driver, update the others to stop
setting it in vain. Also drop the related device class sybmols that
become redundant.
Since the ACPI button driver continues to use acpi_device_class(), make
it clear the struct field represented by acpi_device_class() in its
remove callback.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3706295.iIbC2pHGDl@rafael.j.wysocki
Notice that acpi_notifier_call_chain() only uses its device argument
to retrieve the pnp.device_class and pnp.bus_id values from there, so
it can be redefined to take pointers to those two strings as parameters
istead of a struct acpi_device pointer.
That allows all of its callers to pass a string literal as its first
argument, so they won't need to initialize pnp.device_class in
struct acpi_device objects operated by them any more, and its
signature becomes more similar to acpi_bus_generate_netlink_event()
then.
Update the code as per the above.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2056097.PYKUYFuaPT@rafael.j.wysocki
ACPI drivers usually set acpi_device_name() for the given struct
acpi_device to whatever they like, but that value is never used unless
the driver itself uses it and, quite unfortunately, drivers neglect to
clear it on remove. Some drivers use it for printing messages or
initializing the names of subordinate devices, but it is better to use
string literals for that, especially if the given one is used just once.
To eliminate unnecessary overhead related to acpi_device_name()
handling, rework multiple core ACPI device drivers to stop setting
acpi_device_name() for struct acpi_device objects manipulated
by them and use a string literal instead of it where applicable.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10840483.nUPlyArG6x@rafael.j.wysocki
Currently, the `Reference Performance` register is read every time
the CPU frequency is sampled in `cppc_get_perf_ctrs()`. This function
is on the hot path of the cppc_cpufreq driver.
Reference Performance indicates the performance level that corresponds
to the Reference Counter incrementing and is not expected to change
dynamically during runtime (unlike the Delivered and Reference counters).
Reading this register in the hot path incurs unnecessary overhead,
particularly on platforms where CPC registers are located in the PCC
(Platform Communication Channel) subspace. This patch moves
`reference_perf` from the dynamic feedback counters structure
(`cppc_perf_fb_ctrs`) to the static capabilities structure
(`cppc_perf_caps`).
Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com>
[ rjw: Changelog adjustment ]
Link: https://patch.msgid.link/20260213100935.19111-1-zhangpengjie2@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add sysfs interface to read/write the Performance Limited register.
The Performance Limited register indicates to the OS that an
unpredictable event (like thermal throttling) has limited processor
performance. It contains two sticky bits set by the platform:
- Bit 0 (Desired_Excursion): Set when delivered performance is
constrained below desired performance. Not used when Autonomous
Selection is enabled.
- Bit 1 (Minimum_Excursion): Set when delivered performance is
constrained below minimum performance.
These bits remain set until OSPM explicitly clears them. The write
operation accepts a bitmask of bits to clear:
- Write 0x1 to clear bit 0
- Write 0x2 to clear bit 1
- Write 0x3 to clear both bits
This enables users to detect if platform throttling impacted a workload.
Users clear the register before execution, run the workload, then check
afterward - if set, hardware throttling occurred during that time window.
The interface is exposed as:
/sys/devices/system/cpu/cpuX/cpufreq/perf_limited
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20260206142658.72583-7-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add cppc_get_perf() function to read values of performance control
registers including desired_perf, min_perf, max_perf, energy_perf,
and auto_sel.
This provides a read interface to complement the existing
cppc_set_perf() write interface for performance control registers.
Note that auto_sel is read by cppc_get_perf() but not written by
cppc_set_perf() to avoid unintended mode changes during performance
updates. It can be updated with existing dedicated cppc_set_auto_sel()
API.
Use cppc_get_perf() in cppc_cpufreq_get_cpu_data() to initialize
perf_ctrls with current hardware register values during cpufreq
policy initialization.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20260206142658.72583-2-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On x86, as a rule the CMOS RTC address space handler is set up by the
CMOS RTC ACPI scan handler attach callback, acpi_cmos_rtc_attach(),
but if the ACPI namespace does not contain a CMOS RTC device object,
the CMOS RTC address space handler installation is taken care of the
ACPI TAD (Timer and Alarm Device) driver.
This is not particularly straightforward and can be avoided by adding
the ACPI TAD device ID to the CMOS RTC ACPI scan handler which will
cause it to create a platform device for ACPI TAD after installing
the CMOS RTC address space handler. One related detail that needs to
be taken care of, though, is that the creation of an ACPI TAD platform
device should not cause cmos_rtc_platform_device_present to be set,
since this may cause add_rtc_cmos() to suppress the creation of a
fallback CMOS RTC platform device which may not be the right thing
to do (for instance, due to the fact that the ACPI TAD driver is
missing an RTC class device interface).
After doing the above, the CMOS RTC address space handler installation
and removal can be dropped from the ACPI TAD driver (which allows it to
be simplified quite a bit), acpi_remove_cmos_rtc_space_handler() can
be dropped and acpi_install_cmos_rtc_space_handler() can be made static.
Update the code as per the above.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/23028644.EfDdHjke4D@rafael.j.wysocki
PCC
- Updates to transmission and interrupt handling, including
dynamic txdone configuration, ->last_tx_done() wiring, and SHMEM
initialization fixes. Reverted previous shared buffer patch.
MediaTek
- Introduce mtk-vcp-mailbox driver and bindings for MT8196 VCP.
- Expand mtk-cmdq for MT8196 with GCE virtualization, mminfra_offset,
and instruction generation data.
Spreadtrum (SPRD)
- Add Mailbox Revision 2 support and UMS9230 bindings.
- Fix unhandled interrupt masking and TX done delivery flags.
Microchip
- Add pic64gx compatibility to MPFS.
- Fix out-of-bounds access and smatch warnings in mchp-ipc-sbi.
Core & Misc Platform Updates
- Prevent out-of-bounds access in fw_mbox_index_xlate().
- Add bindings for Qualcomm CPUCP (Kaanapali).
- Simplify mtk-cmdq and zynqmp-ipi with scoped OF child iterators.
- Consolidate various minor fixes, dead code removal, and typo
corrections across Broadcom, NXP, Samsung, Xilinx, ARM, and
core headers.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAmmP4QkACgkQf9lkf8eY
P5XRlg//Ye7g0M4uLODJCPRBCG9WsBfHTi3FrpPi9yiaXXy0v5t8+2vwq8YEzevU
/4UbuC1hANdVbDB8ETtyeI+kmpcIw9VbZz/B4MW5PNr0bNuO1UUKgueoalXwkT6g
4S8zNX+Kx2dvjHjf4UF/tmBDDM0MAMKuTwEiugree2S7tuusrn0MFYt3XEeMVpKN
0ob+JTzSi3kHIiWHLi6ZagK8PqtZtOJTdJEziAz0OgOXdLWg614M0lAwPwdnkqX0
I+nIYeNaDqsR2tmMldPxRGv4A7sKKsZm/nnzrTC7OAvU/q+l7JNjF3ejeMJWehpF
4I6/jFsnAhmBBr/4U+HuzMxwARI11VjexQYlTH+aoZFtfiAEGfCNVYLAnbzOX1jh
7mnb1ccwWlgfuj0GtVYjYbrR0wjZVfsgSZX6mfbEOuDVLeQE/AWV1pq2V2Ptcl/s
qzKQwzDtAuHIJRB73xYthAE4jWF/EigEHyedDPoEXE8K+pkv8G9zuVHQYsejYmNF
oWlnoJZH/q+z7vMKCgblKQDPb++bUbXQr/x4PNLGW7J+ROikOOux0zOBJDaPSWoM
Mpw2sUaWI40IgpmEswtoifqzspYUwN7t/C7nBM/vdyFy/13KVOjV0Jbk2oW7mtMA
BzotYgVIThScG0P7iflXFvQz0fEMN8p4up/nYxbitgBFaBtHdU0=
=9BUB
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Platform and core updates
PCC:
- Updates to transmission and interrupt handling, including dynamic
txdone configuration, ->last_tx_done() wiring, and SHMEM
initialization fixes. Reverted previous shared buffer patch
MediaTek
- Introduce mtk-vcp-mailbox driver and bindings for MT8196 VCP
- Expand mtk-cmdq for MT8196 with GCE virtualization, mminfra_offset,
and instruction generation data
Spreadtrum (SPRD)
- Add Mailbox Revision 2 support and UMS9230 bindings
- Fix unhandled interrupt masking and TX done delivery flags
Microchip
- Add pic64gx compatibility to MPFS
- Fix out-of-bounds access and smatch warnings in mchp-ipc-sbi
Core & Misc Platform Updates
- Prevent out-of-bounds access in fw_mbox_index_xlate()
- Add bindings for Qualcomm CPUCP (Kaanapali)
- Simplify mtk-cmdq and zynqmp-ipi with scoped OF child iterators
- Consolidate various minor fixes, dead code removal, and typo
corrections across Broadcom, NXP, Samsung, Xilinx, ARM, and core
headers"
* tag 'mailbox-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (34 commits)
mailbox: sprd: mask interrupts that are not handled
mailbox: sprd: add support for mailbox revision 2
mailbox: sprd: clear delivery flag before handling TX done
dt-bindings: mailbox: sprd: add compatible for UMS9230
mailbox: bcm-ferxrm-mailbox: Use default primary handler
mailbox: Remove mailbox_client.h from controller drivers
mailbox: zynqmp-ipi: Simplify with scoped for each OF child loop
mailbox: mtk-cmdq: Simplify with scoped for each OF child loop
dt-bindings: mailbox: xlnx,zynqmp-ipi-mailbox: Document msg region requirement
mailbox: Improve RISCV_SBI_MPXY_MBOX guidance
mailbox: mchp-ipc-sbi: fix uninitialized symbol and other smatch warnings
mailbox: arm_mhuv3: fix typo in comment
mailbox: cix: fix typo in error message
mailbox: imx: Skip the suspend flag for i.MX7ULP
mailbox: exynos: drop unneeded runtime pointer (pclk)
mailbox: pcc: Remove spurious IRQF_ONESHOT usage
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
mailbox: mtk-cmdq: Add GCE hardware virtualization configuration
mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction
...
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers (Juan
Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the closest
timer event when the scheduler tick has been stopped to prevent it
from mistakenly selecting the deepest available idle state (Rafael
Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal decisions
in certain corner cases and generally improve idle state selection
accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers (Breno
Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer (Christian
Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping
driver (Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the energy
model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of systemd's
unit file (João Marcos Costa)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmmDr5ASHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1Q8oH/0KRqdidHzesIQl6gd5WSS/sWdxODRUt
R9dEGQQ6LXCY0z05RAq29HZQf618fYuRFX4PSrtyCvrcRJK7MJKuzK55MRq0MC3c
c/2pL1PdpHexjLXUP9pcoxrYjetsr7SnD6Y0M3JfOPg1E/bG8sp1DlnE8cdqrL0W
lrdB2cEGewT2SVkNhCIQ2n6bwfQwmLlfQl1vXTM8BA7xCjoslePUJlRphAFVAt/J
5fQxSOH0eSxK5PYQFUDM2D2J3uMAN0pFb6eIjwVYYqjABqV//BPl99Rv2W3ElJq7
K/SICRWlvzyINCgF15QAUtQHWdINxSb0GzovECVxODHOv0N4mKHdpNU=
=QlVe
-----END PGP SIGNATURE-----
Merge tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of commits, cpufreq is the leading party (again) and the
most visible change there is the removal of the omap-cpufreq driver
that has not been used for a long time (good riddance). There are also
quite a few changes in the cppc_cpufreq driver, mostly related to
fixing its frequency invariance engine in the case when the CPPC
registers used by it are not in PCC. In addition to that, support for
AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
list is updated for some platforms. The remaining cpufreq changes are
assorted fixes and cleanups.
Next up is cpuidle and the changes there are dominated by intel_idle
driver updates, mostly related to the new command line facility
allowing users to adjust the list of C-states used by the driver.
There are also a few updates of cpuidle governors, including two menu
governor fixes and some refinements of the teo governor, and a
MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
[Thanks for stepping up Christian!]
The most significant update related to system suspend and hibernation
is the one to stop freezing the PM runtime workqueue during system PM
transitions which allows some deadlocks to be avoided. There is also a
fix for possible concurrent bit field updates in the core device
suspend code and a few other minor fixes.
Apart from the above, several drivers are updated to discard the
return value of pm_runtime_put() which is going to be converted to a
void function as soon as everybody stops using its return value, PL4
support for Ice Lake is added to the Intel RAPL power capping driver,
and there are assorted cleanups, documentation fixes, and some
cpupower utility improvements.
Specifics:
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers
(Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the
closest timer event when the scheduler tick has been stopped to
prevent it from mistakenly selecting the deepest available idle
state (Rafael Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal
decisions in certain corner cases and generally improve idle state
selection accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers
(Breno Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
(Christian Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael
Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping driver
(Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the
energy model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of
systemd's unit file (João Marcos Costa)"
* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
cpufreq: Documentation: Update description of rate_limit_us default value
cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: EM: Documentation: Fix bug in example code snippet
Documentation: Fix typos in energy model documentation
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpufreq: ondemand: Simplify idle cputime granularity test
cpufreq: userspace: make scaling_setspeed return the actual requested frequency
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
cpufreq: CPPC: Add generic helpers for sysfs show/store
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
...
Merge ACPI APEI support updates for 6.20-rc1/7.0-rc1:
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on systems
with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary overhead
in the NMI handler by carrying out all of the requisite preparations
and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
* acpi-apei:
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: extlog: Trace CPER CXL Protocol Error Section
ACPI: APEI: GHES: Add helper to copy CPER CXL protocol error info to work struct
ACPI: APEI: GHES: Add helper for CPER CXL protocol errors checks
ACPI: extlog: Trace CPER PCI Express Error Section
ACPI: extlog: Trace CPER Non-standard Section Body
ACPI: APEI: GHES: Improve ghes_notify_sea() status check
ACPI: APEI: GHES: Extract helper functions for error status handling
ACPI: APEI: GHES: Improve ghes_notify_nmi() status check
EFI/CPER: don't dump the entire memory region
APEI/GHES: ensure that won't go past CPER allocated record
EFI/CPER: don't go past the ARM processor CPER record buffer
APEI/GHES: ARM processor Error: don't go past allocated memory
ACPI: APEI: EINJ: make read-only array non_mmio_desc static const
Merge ACPI processor driver changes for 6.20-rc1/7.0-rc1:
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
* acpi-processor:
ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_dev() to void
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_states() to void
ACPI: processor: idle: Add debug log for states with invalid entry methods
ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()
ACPI: processor: Do not expose global variable acpi_idle_driver
ACPI: processor: idle: Rearrange declarations in header file
ACPI: processor: idle: Redefine two functions as void
ACPI: processor: Update cpuidle driver check in __acpi_processor_start()
ACPI: processor: Remove unused empty stubs of some functions
ACPI: processor: idle: Optimize ACPI idle driver registration
Merge ACPICA changes for 6.20-rc1/7.0-rc1:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions (Jose
Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
* acpica: (26 commits)
ACPICA: Refactor for TPR Base/Limit registers bitmasks
ACPICA: Replace TPRn Base and Limit registers
ACPICA: Logfile: Changes for version 20251212
ACPICA: Align comments in TPRn-related structures
ACPICA: Cleanup comments and DTPR Table handle functions
ACPICA: Verify DTPR and TPR Instance buffer pointers
ACPICA: Fix Segmentation Fault error related to DTPR
ACPICA: Create auxiliary ACPI_TPR_AUX_SR structure for iASL compiler
ACPICA: ACPI 6.6: Add _VDM (Voltage Domain) object
ACPICA: actbl3.h: ACPI 6.6: SRAT: New flag in Memory Affinity Structure
ACPICA: actbl2.h: ACPI 6.6: RAS2: Update Parameter Block structure
ACPICA: Add Arm IORT IWB node definitions
ACPICA: Add GICv5 MADT structures
ACPICA: Fix asltests using the Fatal() opcode
ACPICA: ACPI 6.4: PPTT: include all fields in subtable type1
ACPICA: Abort AML bytecode execution when executing AML_FATAL_OP
ACPICA: Define DTPR structure related info tables and data template
ACPICA: Add DTPR table support for the ASL compiler
ACPICA: iASL: Add definitions for the IOVT table
ACPICA: Add support for the Microsoft display mux _OSI string
...
- Remove redundant energy_perf field from 'struct cppc_perf_caps' as
the same is available in 'struct cppc_perf_ctrls' which is used.
- Move the 'auto_sel' field from 'struct cppc_perf_caps' to
'struct cppc_perf_ctrls' as it represents a control register.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20260120145623.2959636-3-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio).
- Minor improvements to the cpufreq / cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen).
- Add support for AM62L3 SoC to ti-cpufreq driver (Dhruva Gole).
- Update FIE arch_freq_scale in ticks for non-PCC regs (Jie Zhan).
- Other minor cleanups / improvements (Felix Gu, Juan Martinez, Luca
Weiss, and Sergey Shtylyov).
-----BEGIN PGP SIGNATURE-----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=Zz3B
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull CPUFreq Arm updates for 7.0 from Viresh Kumar:
"- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio).
- Minor improvements to the cpufreq / cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen).
- Add support for AM62L3 SoC to ti-cpufreq driver (Dhruva Gole).
- Update FIE arch_freq_scale in ticks for non-PCC regs (Jie Zhan).
- Other minor cleanups / improvements (Felix Gu, Juan Martinez, Luca
Weiss, and Sergey Shtylyov)."
* tag 'cpufreq-arm-updates-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
cpufreq: CPPC: Update FIE arch_freq_scale in ticks for non-PCC regs
cpufreq: CPPC: Factor out cppc_fie_kworker_init()
ACPI: CPPC: Factor out and export per-cpu cppc_perf_ctrs_in_pcc_cpu()
rust: cpufreq: replace `kernel::c_str!` with C-Strings
cpufreq: Add Tegra186 and Tegra194 to cpufreq-dt-platdev blocklist
dt-bindings: cpufreq: qcom-hw: document Milos CPUFREQ Hardware
rust: cpufreq: add __rust_helper to helpers
rust: cpufreq: always inline functions using build_assert with arguments
Factor out cppc_perf_ctrs_in_pcc_cpu() for checking whether per-cpu CPC
regs are defined in PCC channels, and export it out for further use.
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This reverts commit 5378bdf6a6.
Commit 5378bdf6a6 ("mailbox/pcc: support mailbox management of the shared buffer")
attempted to introduce generic helpers for managing the PCC shared memory,
but it largely duplicates functionality already provided by the mailbox
core and leaves gaps:
1. TX preparation: The mailbox framework already supports this via
->tx_prepare callback for mailbox clients. The patch adds
pcc_write_to_buffer() and expects clients to toggle pchan->chan.manage_writes,
but no drivers set manage_writes, so pcc_write_to_buffer() has no users.
2. RX handling: Data reception is already delivered through
mbox_chan_received_data() and client ->rx_callback. The patch adds an
optional pchan->chan.rx_alloc, which again has no users and duplicates
the existing path.
3. Completion handling: While adding last_tx_done is directionally useful,
the implementation only covers Type 3/4 and fails to handle the absence
of a command_complete register, so it is incomplete for other types.
Given the duplication and incomplete coverage, revert this change. Any new
requirements should be addressed in focused follow-ups rather than bundling
multiple behavioral changes together.
Fixes: 5378bdf6a6 ("mailbox/pcc: support mailbox management of the shared buffer")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Fix Segmentation Fault error, caused by invalid buffer lenght in DTPR
Table Template:
* Update buffer length for TPR Table, which invalid value caused
Segmentation Fault, during ASL file production.
* Refactor invalid values of TPR instances, arrays and serialization
requests count and TPR Base addresses in the DTPR table template.
* Fix offset updating in the acpi_dm_dump_dtpr function.
Link: https://github.com/acpica/acpica/commit/f75850bc4717
Signed-off-by: Michal Camacho Romero <michal.camacho.romero@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2541195.jE0xQCEvom@rafael.j.wysocki
ACPI 6.6 introduces RAS2 enhancements for patrol scrub functionality,
adding new fields to the Parameter Block structure. These fields are
applicable only in the response to the GET_PATROL_PARAMETERS command.
Link: https://github.com/acpica/acpica/commit/062842024000
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2263284.Mh6RI2rZIc@rafael.j.wysocki
In PPTT version 3 an extra field, Cache ID, was added to the Cache Type
Structure. The struct, struct acpi_pptt_cache_v1, contains only this field. This
differs from the treatment of other versioned structures and is unexpected
for linux which reuses the actbl2.h header file. Include all the fields of
the new Cache Type Structure in struct acpi_pptt_cache_v1 and fix up all uses.
Link: https://github.com/acpica/acpica/commit/a9ec9105f552
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1851677.VLH7GnMWUR@rafael.j.wysocki
The Trusted Computing Group has designed multiple interface extensions
around TPM 2.0 devices including the ACPI start method, hardware
information and memory clear features. Add the associated UUIDs to the
list of known UUIDs so that the ASL compiler stops complaining about
them.
Link: https://github.com/acpica/acpica/commit/0e8b10b05825
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2254685.irdbgypaU6@rafael.j.wysocki
ghes_notify_nmi() is called for every NMI and must check whether the NMI was
generated because an error was signalled by platform firmware.
This check is very expensive as for each registered GHES NMI source it reads
from the acpi generic address attached to this error source to get the physical
address of the acpi_hest_generic_status block. It then checks the "block_status"
to see if an error was logged.
The ACPI/APEI code must create virtual mappings for each of those physical
addresses, and tear them down afterwards. On an Icelake system this takes around
15,000 TSC cycles. Enough to disturb efforts to profile system performance.
If that were not bad enough, there are some atomic accesses in the code path
that will cause cache line bounces between CPUs. A problem that gets worse as
the core count increases.
But BIOS changes neither the acpi generic address nor the physical address of
the acpi_hest_generic_status block. So this walk can be done once when the NMI is
registered to save the virtual address (unmapping if the NMI is ever unregistered).
The "block_status" can be checked directly in the NMI handler. This can be done
without any atomic accesses.
Resulting time to check that there is not an error record is around 900 cycles.
Reported-by: Andi Kleen <andi.kleen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://patch.msgid.link/20260112032239.30023-2-xueshuai@linux.alibaba.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move the cpuidle driver check from __acpi_processor_start() to
acpi_processor_power_init() which allows variable acpi_idle_driver to
become static.
No intentional functional impact.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251223100914.2407069-7-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
