TCPCI maxim driver directly writes to the charger's register space to
set charger mode depending on the power role. As MAX77759 chg driver
exists, this WAR is not required.
Instead, use a regulator interface to source vbus when typec is in
source power mode. In other power modes, this regulator will be turned
off if active.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260325-max77759-charger-v9-6-4486dd297adc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Cadence USBSSP (CDNSP) controller was previously only accessible
through PCI, coupling the gadget driver with the PCI glue layer into a
single monolithic module (cdnsp-udc-pci). This prevented using the
CDNSP IP on SoC/platform designs that expose the controller through
device tree. It restructures the driver to decouple the CDNSP gadget
from PCI.
- Introduce CONFIG_USB_CDNSP as a standalone tristate (analogous to
CONFIG_USB_CDNS3), with USB_CDNSP_GADGET and USB_CDNSP_HOST as
bool sub-options. The gadget code builds as a separate cdnsp.ko
module.
- Regroup USBSSP and CDNS3 Kconfig options under the USB_CDNS_SUPPORT
menu so they appear properly grouped in menuconfig.
- Refactor cdnsp-pci.c into a thin PCI-to-platform wrapper (similar
to cdns3-pci-wrap.c) that registers a platform device and passes
PCI resources and platform data to the common platform driver.
- Auto-detect the controller version (USBSS vs USBSSP) at runtime by
reading the DRD/OTG Device ID register in cdns_drd_init(), and select
the appropriate gadget init function (cdns3_gadget_init or
cdnsp_gadget_init) based on cdns->version. This follows the same
pattern already used for host initialization.
- Fix gadget-export.h to use IS_REACHABLE() keyed on the tristate
module config (CONFIG_USB_CDNS3/CONFIG_USB_CDNSP) instead of
IS_ENABLED() on the bool gadget config. The bool configs are always
'y' when enabled, causing IS_ENABLED/IS_REACHABLE to always return
true and resulting in link errors when cdns-usb-common is built-in
but the gadget module is loadable.
- Add missing MODULE_LICENSE()/MODULE_DESCRIPTION() and
EXPORT_SYMBOL_GPL() to the cdns3 and cdnsp gadget modules, required
by modpost.
- Pass override_apb_timeout through cdns3_platform_data so the PCI
wrapper can communicate PCI-specific APB timeout values to the
common driver.
This patch is Assisted-by: Cursor:claude-4.6-opus
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Link: https://patch.msgid.link/20260316064831.274865-3-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FUSB302 fails to probe with -EINVAL if its interrupt line is connected via
an I2C GPIO expander, such as TI TCA6416.
Switch the interrupt handler to a threaded one, which also works behind
such GPIO expanders.
Cc: stable <stable@kernel.org>
Fixes: 309b6341d5 ("usb: typec: fusb302: Revert incorrect threaded irq fix")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogrerus@linux.intel.com>
Link: https://patch.msgid.link/20260317-fusb302-irq-v2-1-dbabd5c5c961@flipper.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Existing checks for VID/PID/DID in the driver are redundant since the
driver is already matched to the device via I2C device ID and OF
compatible strings, and they preclude the use of fallback compatibles.
Remove them to make the driver slimmer and adding new clones easier.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260318-husb311-v4-4-69e029255430@flipper.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some SpacemiT K1 boards (like OrangePi R2S) provide USB VBUS
through a controllable regulator. Add support for the optional
vbus-supply property so the regulator can be properly managed
in host mode instead of left always-on. Note that this doesn't
apply to USB Hub downstream ports with different VBUS supplies.
The enabled and disabled actions of the regulator are handled
automatically by devm_regulator_get_enable_optional().
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Link: https://patch.msgid.link/20260326100010.3588454-2-amadeus@jmu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function usb_gadget_udc_start() was renamed to
usb_gadget_udc_start_locked() by commit 286d9975a8 ("usb: gadget:
udc: core: Prevent soft_connect_store() race"). Update the comment
in usb_gadget_udc_set_speed() accordingly.
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260321110006.8484-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the chip indicates its "Connection Orientation" standard output control
in STANDARD_OUTPUT_CAPABILITIES register, it can do the thing by
programming CONFIG_STANDARD_OUTPUT register. Due to the optional feature,
the chip which not present this capability currently doesn't have a way to
correctly set the data path. This add the support to set orientation via
a simple GPIO.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260319-support-setting-orientation-use-gpio-v4-2-ab6dfa8610c2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows to reduce the size of the initramfs by only selecting
the related firmware when a given SOC is enabled.
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Link: https://patch.msgid.link/20260323140249.173603-1-kwizart@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bdc_sr_xsf() decodes a 5-bit endpoint number from the hardware status
report and uses it to index bdc->bdc_ep_array[] directly. The array is
only allocated to bdc->num_eps for the current controller instance, so a
status report can carry an endpoint number that still fits the 5-bit
field but does not fit the runtime-sized endpoint table.
Reject status reports whose endpoint number is outside bdc->num_eps
before indexing the endpoint array.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Justin Chen <justin.chen@broadcom.com>
Link: https://patch.msgid.link/20260323121730.75245-1-pengpeng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver uses its own definitions for HID requests.
This leads to duplication and obfuscation. Use HID's
definitions.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260325171311.384010-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver uses its own definitions for HID requests.
This leads to duplication and obfuscation. Use HID's
definitions.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260325171311.384010-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a runtime suspend is executed followed by a system suspend, the driver
may invoke dwc3_imx_suspend() twice, which causes enable_irq() to be
called twice as well. This leads to an unbalanced IRQ state and may
trigger warnings or malfunction. Prevent this by checking the pm_suspended
flag before running the imx suspend/resume path.
Fixes: 76fc9452a6 ("usb: dwc3: introduce flatten model driver of i.MX Soc")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260317030546.1665206-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a gadget request is only partially transferred in transfer()
because the per-frame bandwidth budget is exhausted, the loop advances
to the next queued request. If that next request is a zero-length
packet (ZLP), len evaluates to zero and the code takes the
unlikely(len == 0) path, which sets is_short = 1. This bypasses the
bandwidth guard ("limit < ep->ep.maxpacket && limit < len") that
lives in the else branch and would otherwise break out of the loop for
non-zero requests. The is_short path then completes the URB before all
data from the first request has been transferred.
Reproducer (bulk IN, high speed):
Device side (FunctionFS with Linux AIO):
1. Queue a 65024-byte write via io_submit (127 * 512, i.e. a
multiple of the HS bulk max packet size).
2. Immediately queue a zero-length write (ZLP) via io_submit.
Host side:
3. Submit a 65536-byte bulk IN URB.
Expected: URB completes with actual_length = 65024.
Actual: URB completes with actual_length = 53248, losing 11776
bytes that leak into subsequent URBs.
At high speed the per-frame budget is 53248 bytes (512 * 13 * 8).
The 65024-byte request exhausts this budget after 53248 bytes, leaving
the request incomplete (req->req.actual < req->req.length). Neither
the request nor the URB is finished, and rescan is 0, so the loop
advances to the ZLP. For the ZLP, dev_len = 0, so len = min(12288, 0)
= 0, taking the unlikely(len == 0) path and setting is_short = 1.
The is_short handler then sets *status = 0, completing the URB with
only 53248 of the expected 65024 bytes.
Fix this by breaking out of the loop when the current request has
remaining data (req->req.actual < req->req.length). The request
resumes on the next timer tick, preserving correct data ordering.
Signed-off-by: Sebastian Urban <surban@surban.net>
Cc: stable <stable@kernel.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260315151045.1155850-1-surban@surban.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When syscon_regmap_lookup_by_phandle_args() fails, the function was
returning directly without cleaning up the power domain initialized
earlier by dwc3_google_pm_domain_init().
Fix by jumping to err_deinit_pdom to properly clean up resources.
Fixes: 8995a37371 ("usb: dwc3: Add Google Tensor SoC DWC3 glue driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260316-dwc3-google-v1-1-c9bde1b02f62@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This device has a union descriptor that is just garbage
and needs a custom descriptor.
In principle this could be done with a (conditionally
activated) heuristic. That would match more devices
without a need for defining a new quirk. However,
this always carries the risk that the heuristics
does the wrong thing and leads to more breakage.
Defining the quirk and telling it exactly what to do
is the safe and conservative approach.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260317084139.1461008-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit ec35c19696 ("usb: gadget: f_ncm: Fix net_device lifecycle with
device_move") reparents the gadget device to /sys/devices/virtual during
unbind, clearing the gadget pointer. If the userspace tool queries on
the surviving interface during this detached window, this leads to a
NULL pointer dereference.
Unable to handle kernel NULL pointer dereference
Call trace:
eth_get_drvinfo+0x50/0x90
ethtool_get_drvinfo+0x5c/0x1f0
__dev_ethtool+0xaec/0x1fe0
dev_ethtool+0x134/0x2e0
dev_ioctl+0x338/0x560
Add a NULL check for dev->gadget in eth_get_drvinfo(). When detached,
skip copying the fw_version and bus_info strings, which is natively
handled by ethtool_get_drvinfo for empty strings.
Suggested-by: Val Packett <val@packett.cool>
Reported-by: Val Packett <val@packett.cool>
Closes: https://lore.kernel.org/linux-usb/10890524-cf83-4a71-b879-93e2b2cc1fcc@packett.cool/
Fixes: ec35c19696 ("usb: gadget: f_ncm: Fix net_device lifecycle with device_move")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260316-eth-null-deref-v1-1-07005f33be85@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes an error in synchronization in the dummy-hcd driver. The
error has a somewhat involved history. The synchronization mechanism
was introduced by commit 7dbd8f4cab ("USB: dummy-hcd: Fix erroneous
synchronization change"), which added an emulated "interrupts enabled"
flag together with code emulating synchronize_irq() (it waits until
all current handler callbacks have returned).
But the emulated interrupt-disable occurred too late, after the driver
containing the handler callback routines had been told that it was
unbound and no more callbacks would occur. Commit 4a5d797a9f ("usb:
gadget: dummy_hcd: fix gpf in gadget_setup") tried to fix this by
moving the synchronize_irq() emulation code from dummy_stop() to
dummy_pullup(), which runs before the unbind callback.
There still were races, though, because the emulated interrupt-disable
still occurred too late. It couldn't be moved to dummy_pullup(),
because that routine can be called for reasons other than an impending
unbind. Therefore commits 7dc0c55e9f ("USB: UDC core: Add
udc_async_callbacks gadget op") and 04145a03db ("USB: UDC: Implement
udc_async_callbacks in dummy-hcd") added an API allowing the UDC core
to tell dummy-hcd exactly when emulated interrupts and their callbacks
should be disabled.
That brings us to the current state of things, which is still wrong
because the emulated synchronize_irq() occurs before the emulated
interrupt-disable! That's no good, beause it means that more emulated
interrupts can occur after the synchronize_irq() emulation has run,
leading to the possibility that a callback handler may be running when
the gadget driver is unbound.
To fix this, we have to move the synchronize_irq() emulation code yet
again, to the dummy_udc_async_callbacks() routine, which takes care of
enabling and disabling emulated interrupt requests. The
synchronization will now run immediately after emulated interrupts are
disabled, which is where it belongs.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 04145a03db ("USB: UDC: Implement udc_async_callbacks in dummy-hcd")
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/c7bc93fe-4241-4d04-bd56-27c12ba35c97@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot testing was able to provoke an addressing exception and crash
in the usb_gadget_udc_reset() routine in
drivers/usb/gadgets/udc/core.c, resulting from the fact that the
routine was called with a second ("driver") argument of NULL. The bad
caller was set_link_state() in dummy_hcd.c, and the problem arose
because of a race between a USB reset and driver unbind.
These sorts of races were not supposed to be possible; commit
7dbd8f4cab ("USB: dummy-hcd: Fix erroneous synchronization change"),
along with a few followup commits, was written specifically to prevent
them. As it turns out, there are (at least) two errors remaining in
the code. Another patch will address the second error; this one is
concerned with the first.
The error responsible for the syzbot crash occurred because the
stop_activity() routine will sometimes drop and then re-acquire the
dum->lock spinlock. A call to stop_activity() occurs in
set_link_state() when handling an emulated USB reset, after the test
of dum->ints_enabled and before the increment of dum->callback_usage.
This allowed another thread (doing a driver unbind) to sneak in and
grab the spinlock, and then clear dum->ints_enabled and dum->driver.
Normally this other thread would have to wait for dum->callback_usage
to go down to 0 before it would clear dum->driver, but in this case it
didn't have to wait since dum->callback_usage had not yet been
incremented.
The fix is to increment dum->callback_usage _before_ calling
stop_activity() instead of after. Then the thread doing the unbind
will not clear dum->driver until after the call to
usb_gadget_udc_reset() safely returns and dum->callback_usage has been
decremented again.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: syzbot+19bed92c97bee999e5db@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/68fc7c9c.050a0220.346f24.023c.GAE@google.com/
Tested-by: syzbot+19bed92c97bee999e5db@syzkaller.appspotmail.com
Fixes: 7dbd8f4cab ("USB: dummy-hcd: Fix erroneous synchronization change")
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/46135f42-fdbe-46b5-aac0-6ca70492af15@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a
7-bit field (0-127) that is used to index into the connector array in
ucsi_connector_change(). However, the array is only allocated for the
number of connectors reported by the device (typically 2-4 entries).
A malicious or malfunctioning device could report an out-of-range
connector number in the CCI, causing an out-of-bounds array access in
ucsi_connector_change().
Add a bounds check in ucsi_notify_common(), the central point where CCI
is parsed after arriving from hardware, so that bogus connector numbers
are rejected before they propagate further.
Fixes: bdc62f2bae ("usb: typec: ucsi: Simplified registration and I/O API")
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Nathan Rebello <nathan.c.rebello@gmail.com>
Link: https://patch.msgid.link/20260313222453.123-1-nathan.c.rebello@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A race condition between gether_disconnect() and eth_stop() leads to a
NULL pointer dereference. Specifically, if eth_stop() is triggered
concurrently while gether_disconnect() is tearing down the endpoints,
eth_stop() attempts to access the cleared endpoint descriptor, causing
the following NPE:
Unable to handle kernel NULL pointer dereference
Call trace:
__dwc3_gadget_ep_enable+0x60/0x788
dwc3_gadget_ep_enable+0x70/0xe4
usb_ep_enable+0x60/0x15c
eth_stop+0xb8/0x108
Because eth_stop() crashes while holding the dev->lock, the thread
running gether_disconnect() fails to acquire the same lock and spins
forever, resulting in a hardlockup:
Core - Debugging Information for Hardlockup core(7)
Call trace:
queued_spin_lock_slowpath+0x94/0x488
_raw_spin_lock+0x64/0x6c
gether_disconnect+0x19c/0x1e8
ncm_set_alt+0x68/0x1a0
composite_setup+0x6a0/0xc50
The root cause is that the clearing of dev->port_usb in
gether_disconnect() is delayed until the end of the function.
Move the clearing of dev->port_usb to the very beginning of
gether_disconnect() while holding dev->lock. This cuts off the link
immediately, ensuring eth_stop() will see dev->port_usb as NULL and
safely bail out.
Fixes: 2b3d942c48 ("usb ethernet gadget: split out network core")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260311-gether-disconnect-npe-v1-1-454966adf7c7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Static structure "ti_tusb8041_data" is exactly the same as
"ti_tusb8020b_data" and "cypress_hx2vl_data" is the same as
"microchip_usb424_data". Drop the duplicated structures to reduce
driver size and memory usage without affecting functionality.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260318084626.34314-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a port is disabled, an attached device will be disconnected. This
causes a port-status-change event, which will race with hub autosuspend
(if the disabled port was the only connected port on its hub), causing
an immediate resume and a second autosuspend. Both of these can be
avoided by adding a short delay after the call to
usb_hub_set_port_power().
Below log shows what is happening:
$ echo 1 > usb1-port1/disable
[ 37.958239] usb 1-1: USB disconnect, device number 2
[ 37.964101] usb 1-1: unregistering device
[ 37.970070] hub 1-0:1.0: hub_suspend
[ 37.971305] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 37.974412] usb usb1: bus auto-suspend, wakeup 1
[ 37.988175] usb usb1: suspend raced with wakeup event <---
[ 37.993947] usb usb1: usb auto-resume
[ 37.998401] hub 1-0:1.0: hub_resume
[ 38.105688] usb usb1-port1: status 0000, change 0000, 12 Mb/s
[ 38.112399] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 38.118645] hub 1-0:1.0: hub_suspend
[ 38.122963] usb usb1: bus auto-suspend, wakeup 1
[ 38.200368] usb usb1: usb wakeup-resume
[ 38.204982] usb usb1: usb auto-resume
[ 38.209376] hub 1-0:1.0: hub_resume
[ 38.213676] usb usb1-port1: status 0101 change 0001
[ 38.321552] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 38.327978] usb usb1-port1: status 0101, change 0000, 12 Mb/s
[ 38.457429] usb 1-1: new high-speed USB device number 3 using ci_hdrc
Then, port change bit will be fixed to the final state and
usb_clear_port_feature() can correctly clear it after this period. This
will also avoid usb runtime suspend routine to run because
usb_autopm_put_interface() not run yet.
Fixes: f061f43d74 ("usb: hub: port: add sysfs entry to switch port power")
Cc: stable@kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260316095042.1559882-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB core only relaxes the default PM_QOS_FLAG_NO_POWER_OFF policy when
an upstream hub reports switchable port power. That misses internal
ports whose power is managed by platform firmware instead of the USB
hub descriptor.
Allow the port-poweroff policy to be exposed for hard-wired ports with
an ACPI-managed power resource. The existing runtime PM path still
requires the child usage count to drop and remote wakeup to be clear
before it will power the port down.
This lets internal devices such as CNVi Bluetooth use the existing USB
ACPI runtime power path even when the root hub reports no USB-standard
port power switching.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://patch.msgid.link/20260315223433.23452-1-sean@starlabs.systems
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of "shrinking" the allocation by kmalloc()ing a new, smaller
buffer, utilize krealloc() to shrink the existing allocation. This saves
a memcpy(), as well as eliminates the temporary `smallbuf` allocation,
which guards against allocation failure under extreme memory pressure.
Signed-off-by: Bence Csókás <bence98@sch.bme.hu>
Link: https://patch.msgid.link/20260315-usb-krealloc-v2-1-32f83e090409@sch.bme.hu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the ID entries and platform data for the Corechips SL6341 onboard
USB 2.0/3.0 hub controller, which requires a reset pin and a power supply
for proper operation.
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260311-sl6341-v1-3-0a890056f054@flipper.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk_enable() may fail according to the API contract.
Previously, udc_enable() ignored its return value and returned void.
Modify udc_enable() to return the error code. Additionally, update
all of its callers (pxa_udc_pullup, pxa_udc_vbus_session,
pxa27x_udc_start, pxa_udc_probe, and pxa_udc_resume) to check
this return value and handle the failure properly with necessary
cleanups or rollbacks.
Signed-off-by: Zhaoyang Yu <2426767509@qq.com>
Link: https://patch.msgid.link/tencent_46693FE6DB434ACFB7412B16F6078AC01A06@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On X1E80100, when we connect a USB4 capable dock, the PARTNER_FLAGS
indicate USB4_GEN3 being set whilst keeping the PARTNER_FLAGS_USB
cleared. Due to this, during ucsi_partner_change call, the usb role
is marked as ROLE_NONE and passed to DWC3 controller the same way.
Fix this by adding UCSI_USB4_IMPLIES_USB quirk and check for it to
decide and pass on proper ROLE information to DWC3 layer.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260312101431.2375709-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function itself, if it has to wait to perform
IO, use interruptible sleep. Hence the sleep needed
to avoid the write code path racing with itself should also
use interruptible sleep.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260312094619.1590556-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver saves the minor number it gets upon registration
in its descriptor for debugging purposes. However, there is
inevitably a window between registration and saving the correct
minor in a descriptor. During this window the debugging output
will be wrong.
As wrong debug output is worse than no debug output, just
remove it.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260312094619.1590556-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A UAS device can in principle contain multiple busses.
A reset on the USB level will reset them all. We
cannot reset a single bus.
In practical terms this does not matter, as only
one method of reset is implemented, but we should
not lie.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260312123435.2015029-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert kzalloc_obj(s) to kzalloc_flex to save an allocation.
Add __counted_by to get extra runtime analysis. Move counting variable
assignment immediately after allocation as required by __counted_by.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260313003456.124270-1-rosenp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes one allocation and one free by using a flexible array member.
Also added __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260311232043.18025-1-rosenp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB device while it is bound to a
driver and there is no need to take additional references unless the
structure is needed after disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305133851.2952-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB device while it is bound to a
driver and there is no need to take additional references unless the
structure is needed after disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://patch.msgid.link/20260305133851.2952-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
The Blackbox 724-746-5500 USB Director USB-RS-232 HUB, part number
IC135A, is a rebadged Edgeport/4 with its own USB device id.
Signed-off-by: Frej Drejhammar <frej@stacken.kth.se>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Add USB_QUIRK_NO_BOS for ezcap401 capture card, without it dmesg will show
"unable to get BOS descriptor or descriptor too short" and "unable to
read config index 0 descriptor/start: -71" errors and device will not
able to work at full speed at 10gbs
Signed-off-by: Vyacheslav Vahnenko <vahnenko2003@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260313123638.20481-1-vahnenko2003@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_role_switch_is_parent() was walking up to the parent node and checking
for the "usb-role-switch" property regardless of the type of the passed
fwnode. This could cause unrelated device nodes to be probed as potential
role switch parent, leading to spurious matches and "-EPROBE_DEFER" being
returned infinitely.
Till now only Type-B connector node will have a parent node which may
present "usb-role-switch" property and register the role switch device.
For Type-C connector node, its parent node will always be a Type-C chip
device which will never register the role switch device. However, it may
still present a non-boolean "usb-role-switch = <&usb_controller>" property
for historical compatibility.
So restrict the helper to only operate on Type-B connector when attempting
to get the role switch from parent node.
Fixes: 6fadd72943 ("usb: roles: get usb-role-switch from parent")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260309074313.2809867-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 1366cd228b.
The fwnode_usb_role_switch_get() returns NULL only if no connection is
found, returns ERR_PTR(-EPROBE_DEFER) if connection is found but deferred
probe is needed, or a valid pointer of usb_role_switch.
When switching from a NULL check to IS_ERR_OR_NULL(), usb_role_switch_get()
returns NULL and overwrites the ERR_PTR(-EPROBE_DEFER) returned by
fwnode_usb_role_switch_get(). This causes the deferred probe indication to
be lost, preventing the USB role switch from ever being retrieved.
Fixes: 1366cd228b ("tcpm: allow looking for role_sw device in the main node")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260309074313.2809867-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The network device outlived its parent gadget device during
disconnection, resulting in dangling sysfs links and null pointer
dereference problems.
A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1]
was reverted due to power management ordering concerns and a NO-CARRIER
regression.
A subsequent attempt to defer net_device allocation to bind [2] broke
1:1 mapping between function instance and network device, making it
impossible for configfs to report the resolved interface name. This
results in a regression where the DHCP server fails on pmOS.
Use device_move to reparent the net_device between the gadget device and
/sys/devices/virtual/ across bind/unbind cycles. This preserves the
network interface across USB reconnection, allowing the DHCP server to
retain their binding.
Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use
__free(detach_gadget) macro to undo attachment on bind failure. The
bind_count ensures device_move executes only on the first bind.
[1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/
[2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/
Fixes: 40d133d7f5 ("usb: gadget: f_ncm: convert to new function interface with backward compatibility")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-7-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit e065c6a7e4.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-6-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 7a7930c0f9.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-5-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 0c0981126b.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-4-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 56a512a9b4.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-3-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit fde0634ad9.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-2-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 0d6c8144ca.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-1-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dp_altmode_configure sets the signaling rate to the current
configuration's rate and then shifts the value to the Select
Configuration bitfield. On the initial configuration, dp->data.conf
is 0 to begin with, so the signaling rate field is never set, which
leads to some DisplayPort Alt Mode partners sending NAK to the
Configure message.
Set the signaling rate to the capabilities supported by both the
port and the port partner. If the cable supports DisplayPort Alt Mode,
then include its capabilities as well.
Fixes: a17fae8fc3 ("usb: typec: Add Displayport Alternate Mode 2.1 Support")
Cc: stable <stable@kernel.org>
Signed-off-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260310204106.3939862-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the necessary PCI ID for Intel Nova Lake -H
devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260309130204.208661-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to other Huawei LTE modules using this quirk, this version with
another vid/pid suffers from spurious wakeups.
Setting the quirk fixes the issue for this device as well.
Cc: stable <stable@kernel.org>
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260306172817.2098898-1-wse@tuxedocomputers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal reported and debgged a NULL pointer dereference bug in the
recently added portli debugfs files
Oops is caused when there are more port registers counted in
xhci->max_ports than ports reported by Supported Protocol capabilities.
This is possible if max_ports is more than maximum port number, or
if there are gaps between ports of different speeds the 'Supported
Protocol' capabilities.
In such cases port->rhub will be NULL so we can't reach xhci behind it.
Add an explicit NULL check for this case, and print portli in hex
without dereferencing port->rhub.
Reported-by: Michal Pecio <michal.pecio@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20260304103856.48b785fd.michal.pecio@gmail.com
Fixes: 384c57ec72 ("usb: xhci: Add debugfs support for xHCI Port Link Info (PORTLI) register.")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260304223639.3882398-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xHCI controller reports a Host Controller Error (HCE) in UAS Storage
Device plug/unplug scenarios on Android devices. HCE is checked in
xhci_irq() function and causes an interrupt storm (since the interrupt
isn’t cleared), leading to severe system-level faults.
When the xHC controller reports HCE in the interrupt handler, the driver
only logs a warning and assumes xHC activity will stop as stated in xHCI
specification. An interrupt storm does however continue on some hosts
even after HCE, and only ceases after manually disabling xHC interrupt
and stopping the controller by calling xhci_halt().
Add xhci_halt() to xhci_irq() function where STS_HCE status is checked,
mirroring the existing error handling pattern used for STS_FATAL errors.
This only fixes the interrupt storm. Proper HCE recovery requires resetting
and re-initializing the xHC.
CC: stable@vger.kernel.org
Signed-off-by: Dayu Jiang <jiangdayu@xiaomi.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260304223639.3882398-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_alloc_command() allocates a command structure and, when the
second argument is true, also allocates a completion structure.
Currently, the error handling path in xhci_disable_slot() only frees
the command structure using kfree(), causing the completion structure
to leak.
Use xhci_free_command() instead of kfree(). xhci_free_command() correctly
frees both the command structure and the associated completion structure.
Since the command structure is allocated with zero-initialization,
command->in_ctx is NULL and will not be erroneously freed by
xhci_free_command().
This bug was found using an experimental static analysis tool we are
developing. The tool is based on the LLVM framework and is specifically
designed to detect memory management issues. It is currently under
active development and not yet publicly available, but we plan to
open-source it after our research is published.
The bug was originally detected on v6.13-rc1 using our static analysis
tool, and we have verified that the issue persists in the latest mainline
kernel.
We performed build testing on x86_64 with allyesconfig using GCC=11.4.0.
Since triggering these error paths in xhci_disable_slot() requires specific
hardware conditions or abnormal state, we were unable to construct a test
case to reliably trigger these specific error paths at runtime.
Fixes: 7faac1953e ("xhci: avoid race between disable slot command and host runtime suspend")
CC: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260304223639.3882398-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quoting the bug report:
Due to compiler optimization or CPU out-of-order execution, the
desc->length update can be reordered before the memmove. If this
happens, wdm_read() can see the new length and call copy_to_user() on
uninitialized memory. This also violates LKMM data race rules [1].
Fix it by using WRITE_ONCE and memory barriers.
Fixes: afba937e54 ("USB: CDC WDM driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Closes: https://lore.kernel.org/linux-usb/CALbr=LbrUZn_cfp7CfR-7Z5wDTHF96qeuM=3fO2m-q4cDrnC4A@mail.gmail.com/
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260304130116.1721682-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In usbhs_remove(), the driver frees resources (including the pipe array)
while the interrupt handler (usbhs_interrupt) is still registered. If an
interrupt fires after usbhs_pipe_remove() but before the driver is fully
unbound, the ISR may access freed memory, causing a use-after-free.
Fix this by calling devm_free_irq() before freeing resources. This ensures
the interrupt handler is both disabled and synchronized (waits for any
running ISR to complete) before usbhs_pipe_remove() is called.
Fixes: f1407d5c66 ("usb: renesas_usbhs: Add Renesas USBHS common code")
Cc: stable <stable@kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260303073344.34577-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CH343 USB/serial adapter is as buggy as it is popular (very).
One of its quirks is that despite being capable of signalling a
BREAK condition, it doesn't advertise it.
This used to work nonetheless until 66aad7d8d3 ("usb: cdc-acm:
return correct error code on unsupported break") applied some
reasonable restrictions, preventing breaks from being emitted on
devices that do not advertise CAP_BRK.
Add a quirk for this particular device, so that breaks can still
be produced on some of my machines attached to my console server.
Fixes: 66aad7d8d3 ("usb: cdc-acm: return correct error code on unsupported break")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable <stable@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260301124440.1192752-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `check_command_size_in_blocks()` function calculates the data size
in bytes by left shifting `common->data_size_from_cmnd` by the block
size (`common->curlun->blkbits`). However, it does not validate whether
this shift operation will cause an integer overflow.
Initially, the block size is set up in `fsg_lun_open()` , and the
`common->data_size_from_cmnd` is set up in `do_scsi_command()`. During
initialization, there is no integer overflow check for the interaction
between two variables.
So if a malicious USB host sends a SCSI READ or WRITE command
requesting a large amount of data (`common->data_size_from_cmnd`), the
left shift operation can wrap around. This results in a truncated data
size, which can bypass boundary checks and potentially lead to memory
corruption or out-of-bounds accesses.
Fix this by using the check_shl_overflow() macro to safely perform the
shift and catch any overflows.
Fixes: 144974e7f9 ("usb: gadget: mass_storage: support multi-luns with different logic block size")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260228104324.1696455-2-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When adding dynamic configuration for bInterval, the value was removed
from the static SuperSpeed endpoint descriptors but was not set from the
configured value in hidg_bind(). Thus at SuperSpeed the interrupt
endpoints have bInterval as zero which is not valid per the USB
specification.
Add the missing setting for SuperSpeed endpoints.
Fixes: ea34925f5b ("usb: gadget: hid: allow dynamic interval configuration via configfs")
Cc: stable <stable@kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://patch.msgid.link/20260227111540.431521-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some USB devices incorrectly report bNumConfigurations as 0 in their
device descriptor, which causes the USB core to reject them during
enumeration.
logs:
usb 1-2: device descriptor read/64, error -71
usb 1-2: no configurations
usb 1-2: can't read configurations, error -22
However, these devices actually work correctly when
treated as having a single configuration.
Add a new quirk USB_QUIRK_FORCE_ONE_CONFIG to handle such devices.
When this quirk is set, assume the device has 1 configuration instead
of failing with -EINVAL.
This quirk is applied to the device with VID:PID 5131:2007 which
exhibits this behavior.
Signed-off-by: Jie Deng <dengjie03@kylinos.cn>
Link: https://patch.msgid.link/20260227084931.1527461-1-dengjie03@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If get_1284_register() fails, the usb device reference count is
incorrect and needs to be properly dropped before returning. That will
happen when the kref is dropped in the call to destroy_priv(), so jump
to that error path instead of returning directly.
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022342-smokiness-stove-d792@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in
usbcore allow unlimited timeout durations. And since they use
uninterruptible waits, this leaves open the possibility of hanging a
task for an indefinitely long time, with no way to kill it short of
unplugging the target device.
To prevent this sort of problem, enforce a maximum limit on the length
of these unkillable timeouts. The limit chosen here, somewhat
arbitrarily, is 60 seconds. On many systems (although not all) this
is short enough to avoid triggering the kernel's hung-task detector.
In addition, clear up the ambiguity of negative timeout values by
treating them the same as 0, i.e., using the maximum allowed timeout.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/15fc9773-a007-47b0-a703-df89a8cf83dd@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The synchronous message API in usbcore (usb_control_msg(),
usb_bulk_msg(), and so on) uses uninterruptible waits. However,
drivers may call these routines in the context of a user thread, which
means it ought to be possible to at least kill them.
For this reason, introduce a new usb_bulk_msg_killable() function
which behaves the same as usb_bulk_msg() except for using
wait_for_completion_killable_timeout() instead of
wait_for_completion_timeout(). The same can be done later for
usb_control_msg() later on, if it turns out to be needed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/248628b4-cc83-4e81-a620-3ce4e0376d41@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the error path from the usb_phy_roothub_set_mode() function.
The code is clearly wrong, because phy_set_mode() calls can't be
balanced with phy_power_off() calls.
Additionally, the usb_phy_roothub_set_mode() function is called only
from usb_add_hcd() before it powers on the PHYs, so powering off those
makes no sense anyway.
Presumably, the code is copy-pasted from the phy_power_on() function
without adjusting the error handling.
Cc: stable@vger.kernel.org # v5.1+
Fixes: b97a313483 ("usb: core: comply to PHY framework")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260218-usb-phy-poweroff-fix-v1-1-66e6831e860e@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for responding to Sink Cap Extended msg request. To achieve
this, include parsing support for DT properties related to Sink Cap
Extended. The request for Sink Cap Ext is a control message while the
response is an extended message (chunked). As the Sink Caps Extended
Data Block size (24 Byte) is less than MaxExtendedMsgChunkLen (26 Byte),
a single chunk is sufficient to complete this AMS.
Supporting sink cap extended messages while responding to a
Get_Sink_Caps_Extended request when port is in Sink role is required in
order to be compliant with at least USB PD Rev3.1 Ver1.8.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260223-skedb-v2-2-60675765bc7e@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move VID field to chip info to accommodate different VIDs.
Add chip info for Etek Micro ET7304. ET7304 is functionally
identical to the Richtek RT1715, with the only difference
being the VID.
Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260220-et7304-v3-2-ede2d9634957@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-7-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-6-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-5-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-4-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-3-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260310094434.3639602-2-aichao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some devices use combo PHYs (i.e. USB3 + DisplayPort), which also
handle the lane muxing. These PHYs are referenced twice from
the USB-C connector (USB super-speed lines and SBU/AUX lines)
resulting in the mux being configured twice. Avoid this by
dropping duplicates.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260223-typec-mux-duplication-fix-v2-2-0402fefc222e@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some devices use combo PHYs (i.e. USB3 + DisplayPort), which also
handle the orientation mux. These PHYs are referenced twice from
the USB-C connector (USB super-speed lines and SBU/AUX lines)
resulting in the switch being configured twice. Avoid this by
dropping duplicates.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260223-typec-mux-duplication-fix-v2-1-0402fefc222e@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable tps->partner is checked for an error pointer and then if it
is, it sends an error message but does not return and then immediately
dereferenced a few lines below:
tps->partner = typec_register_partner(tps->port, &desc);
if (IS_ERR(tps->partner))
dev_warn(tps->dev, "%s: failed to register partnet\n", __func__);
if (desc.identity) {
typec_partner_set_identity(tps->partner);
cd321x->cur_partner_identity = st.partner_identity;
}
Add early return and fix spelling mistake in error message.
Detected by Smatch:
drivers/usb/typec/tipd/core.c:827 cd321x_update_work() error:
'tps->partner' dereferencing possible ERR_PTR()
Fixes: 82432bbfb9 ("usb: typec: tipd: Handle mode transitions for CD321x")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260218214621.38154-1-ethantidmore06@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
File-scope 'tcpci_pm_ops' is not used outside of this unit, so make it
static to silence sparse warning:
tcpm/tcpci.c:1002:1: warning: symbol 'tcpci_pm_ops' was not declared. Should it be static?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20260216110403.159945-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ucsi_run_command trace event is exposed in tracefs, but it never
produces any output because the UCSI core never invokes the associated
tracepoint. As a result, enabling the event under events/ucsi/ yields
no traces, preventing users from inspecting UCSI command sequencing.
Wire the tracepoint into the UCSI command path so that commands are
properly reported.
Example:
50.692342: ucsi_run_command: GET_CONNECTOR_STATUS -> OK (err=0)
50.692345: ucsi_connector_change: port0 status: change=4800, ...
51.750298: ucsi_run_command: GET_CABLE_PROPERTY -> FAIL (err=-5)
51.773360: ucsi_run_command: GET_CONNECTOR_STATUS -> OK (err=0)
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260217103403.1956-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch warns that __dwc3_gadget_kick_transfer() might be missing an
error code when returning 'ret' at line 1691.
While 'ret' is guaranteed to be 0 at this point, returning an explicit 0
improves readability by removing a level of indirection and clarifies
the intent that this is a successful "no-op" path. This change also
silences the Smatch warning.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Zeeshan Ahmad <zeeshanahmad022019@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260306090643.47383-1-zeeshanahmad022019@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The platform_get_irq_byname_optional() function returns a non-zero
IRQ number on success and a negative error code on failure. It
never returns zero.
The current implementation in the modern dwc3-qcom driver checks for
a return value less than or equal to zero. Since zero is not a
valid return value, simplify the check to only look for negative
error codes. This aligns the logic with the standard return contract
of the platform IRQ APIs.
Signed-off-by: Zeeshan Ahmad <zeeshanahmad022019@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260225065157.8952-1-zeeshanahmad022019@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111511.18386-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111511.18386-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB interface while it is bound to
a driver and there is no need to take another reference unless the
interface is needed after disconnect.
Drop the redundant interface reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260305111511.18386-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111511.18386-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111511.18386-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It should be 'HighSpeed' instead of 'HishSpeed'.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260304113916.856841-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add '*' to needs_full_reinit comment line to fix a kernel-doc issue.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260304113916.856841-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to use fusb302 based USB-C connectors with the DP altmode
helper code on devicetree based platforms. To get this working there
must be a DRM bridge chain from the DisplayPort controller to the USB-C
connector. E.g. on Rockchip RK3576:
root@rk3576 # cat /sys/kernel/debug/dri/0/encoder-0/bridges
bridge[0]: dw_dp_bridge_funcs
refcount: 7
type: [10] DP
OF: /soc/dp@27e40000:rockchip,rk3576-dp
ops: [0x47] detect edid hpd
bridge[1]: drm_aux_bridge_funcs
refcount: 4
type: [0] Unknown
OF: /soc/phy@2b010000:rockchip,rk3576-usbdp-phy
ops: [0x0]
bridge[2]: drm_aux_hpd_bridge_funcs
refcount: 5
type: [10] DP
OF: /soc/i2c@2ac50000/typec-portc@22/connector:usb-c-connector
ops: [0x4] hpd
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260310-fusb302-drm-dp-hpd-bridge-v1-1-ffd41ef9afe3@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplifies allocation and allows using __counted_by for extra runtime
analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20260306031639.46942-1-rosenp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Microchip USB3340x ULPI PHY requires a delay when switching to the
high-speed transmitter. See:
http://ww1.microchip.com/downloads/en/DeviceDoc/80000645A.pdf
Module 2 "Device Enumeration Failure with Link IP Systems"
For details on the behavior and fix, refer to the AMD (formerly Xilinx)
forum post: "USB stuck in full speed mode with USB3340 ULPI PHY, ZynqMP."
This patch uses the USB PHY Vendor-ID and Product-ID to detect the
USB3340 PHY and then applies the necessary fix if this PHY is found.
Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260305121452.54082-2-ingo.rohloff@lauterbach.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a regulator-only entry matching OF-described USB Type-A connectors.
This allows platforms to explicitly model VBUS supply regulators for these
ports instead of calling them PHY supplies or making the respective
regulators always-on in their device trees.
Type-A ports won't typically need a dedicated driver, as there is nothing
to configure apart from the power supply, so there is no controller driver
to traverse the OF graph and request the VBUS regulator, unlike for Type-C
ports. Thus make it an onboard USB device, which it kind of really is.
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260217-typea-vbus-v1-1-657b4e55a4c2@flipper.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the USB core code handles the generic USB PHYs automatically, the
optional PHY handling code has been removed from the 'ehci-orion' driver
entirely by commit e04585184d ("usb: ehci-orion: avoid double PHY
initialization"). However, the devm_phy_optional_get() call has been kept
so the driver still gets the PHY even though it is not used for anything
in the driver.
Drop the remaining code, and also remove the 'phy' member of the
'orion_ehci_hcd' structure to simplify the code.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260221-ehci-orion-drop-phy-handling-v2-1-5e26aa73790b@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the PHY subsystem already synchronizes concurrent accesses to a PHY
instance with a core-internal mutex remove the driver specific mutex
synchronization.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://patch.msgid.link/20260127-diogo-tegra_phy-v2-2-787b9eed3ed5@tecnico.ulisboa.pt
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This has us use the driver's completion preference by default. There is
no behavior changes with this patch and we queue completion to LIO's
completion workqueue by default.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260222232946.7637-3-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The i.MX USB glue and DWC3 core are closely coupled. Describe the i.MX
USB block in a single block will bring more benefits than a parent-
child relation. To support the flatten model devicetree, DWC3 USB core
driver already support to directly register and initialize the core in
glue layer using one device. And many notification can be received in
glue layer timely and proper actions can be executed accordingly.
To align with mainstream, introduce a new driver to support flatten dwc3
devicetree model for i.MX Soc. Besides this driver disables wakeup irq
when system is active, no other function change in this version compared
to dwc3-imx8mp.c. After this new driver is settled, only maintenance
fixes will be added to dwc3-imx8mp.c, new features will only be added
to this new driver. Once all users switch to this new one, the legacy
driver will be removed at proper time.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260212-add-flatten-dts-based-dwc3-imx-driver-v5-3-ff04a75ce221@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current design assumes that the controller remains powered when wakeup
is enabled. However, some SoCs provide wakeup capability even when the
controller itself is powered down, using separate dedicated wakeup logic.
This allows additional power savings, but requires the controller to be
fully re‑initialized after system resume.
To support these SoCs, introduce a flag needs_full_reinit for the purpose.
And the glue layer needs to indicate if the controller needs this behavior
by setting a same flag needs_full_reinit in dwc3_properties.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260212-add-flatten-dts-based-dwc3-imx-driver-v5-2-ff04a75ce221@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdc800_device_read() submits download_urb and waits for completion.
If the timeout fires and the device has not responded, the function
returns without killing the URB, leaving it active.
A subsequent read() resubmits the same URB while it is still
in-flight, triggering the WARN in usb_submit_urb():
"URB submitted while active"
Check the return value of wait_event_timeout() and kill the URB if
it indicates timeout, ensuring the URB is complete before its status
is inspected or the URB is resubmitted.
Similar to
- commit 372c931319 ("USB: yurex: fix control-URB timeout handling")
- commit b98d5000c5 ("media: rc: iguanair: handle timeouts")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260209151937.2247202-1-n7l8m4@u.northwestern.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a signal arrives after a read has partially completed,
we need to return the number of bytes read. -EINTR is correct
only if that number is zero.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260209142048.1503791-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bbu member of the descriptor must be set to the value
standing for uninitialized values before the URB whose
completion handler sets bbu is submitted. Otherwise there is
a window during which probing can overwrite already retrieved
data.
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260209143720.1507500-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ncm_set_alt function was holding a mutex to protect against races
with configfs, which invokes the might-sleep function inside an atomic
context.
Remove the struct net_device pointer from the f_ncm_opts structure to
eliminate the contention. The connection state is now managed by a new
boolean flag to preserve the use-after-free fix from
commit 6334b8e455 ("usb: gadget: f_ncm: Fix UAF ncm object at re-bind
after usb ep transport error").
BUG: sleeping function called from invalid context
Call Trace:
dump_stack_lvl+0x83/0xc0
dump_stack+0x14/0x16
__might_resched+0x389/0x4c0
__might_sleep+0x8e/0x100
...
__mutex_lock+0x6f/0x1740
...
ncm_set_alt+0x209/0xa40
set_config+0x6b6/0xb40
composite_setup+0x734/0x2b40
...
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260221-legacy-ncm-v2-2-dfb891d76507@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle
with bind/unbind") deferred the allocation of the net_device. This
change leads to a NULL pointer dereference in the legacy NCM driver as
it attempts to access the net_device before it's fully instantiated.
Store the provided qmult, host_addr, and dev_addr into the struct
ncm_opts->net_opts during gncm_bind(). These values will be properly
applied to the net_device when it is allocated and configured later in
the binding process by the NCM function driver.
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable@kernel.org
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202602181727.fd76c561-lkp@intel.com
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260221-legacy-ncm-v2-1-dfb891d76507@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically
managed and tied to userspace configuration via ConfigFS. It can be
NULL if the USB host sends requests before the nexus is fully
established or immediately after it is dropped.
Currently, functions like `bot_submit_command()` and the data
transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately
dereference `tv_nexus->tvn_se_sess` without any validation. If a
malicious or misconfigured USB host sends a BOT (Bulk-Only Transport)
command during this race window, it triggers a NULL pointer
dereference, leading to a kernel panic (local DoS).
This exposes an inconsistent API usage within the module, as peer
functions like `usbg_submit_command()` and `bot_send_bad_response()`
correctly implement a NULL check for `tv_nexus` before proceeding.
Fix this by bringing consistency to the nexus handling. Add the
missing `if (!tv_nexus)` checks to the vulnerable BOT command and
request processing paths, aborting the command gracefully with an
error instead of crashing the system.
Fixes: c52661d60f ("usb-gadget: Initial merge of target module for UASP + BOT")
Cc: stable <stable@kernel.org>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260219023834.17976-1-jiashengjiangcool@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several USB capture devices also need the USB_QUIRK_NO_BOS set for them
to work properly, odds are they are all the same chip inside, just
different vendor/product ids.
This fixes up:
- ASUS TUF 4K PRO
- Avermedia Live Gamer Ultra 2.1 (GC553G2)
- UGREEN 35871
to now run at full speed (10 Gbps/4K 60 fps mode.)
Link: https://lore.kernel.org/r/CACy+XB-f-51xGpNQFCSm5pE_momTQLu=BaZggHYU1DiDmFX=ug@mail.gmail.com
Cc: stable <stable@kernel.org>
Signed-off-by: A1RM4X <dev@a1rm4x.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Here is the "big" set of USB and Thunderbolt driver updates for 7.0-rc1.
Overall more lines were removed than added, thanks to dropping the
obsolete isp1362 USB host controller driver, always a nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaZR0Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylcCgCfUyUFi0UOMPRyrU/fo5nyeWomgvsAnRst3nva
y7BvYwC2L4FIP23snrTM
=8S4Q
-----END PGP SIGNATURE-----
Merge tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes. The biggest core change is the massive code
motion in the sd driver to remove forward declarations and the most
significant change is to enumify the queuecommand return.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaY4ljBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIWFlwEAr9nc1ntxH4UNPgFCVjKyAOa5IE+p5o5C
2lwQIufcihEBAORvI9KO6AoEK6v9TmMKZXoyVsDRFe79fQE5NwCjfAA3
=My8f
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes.
The biggest core change is the massive code motion in the sd driver to
remove forward declarations and the most significant change is to
enumify the queuecommand return"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
scsi: csiostor: Fix dereference of null pointer rn
scsi: buslogic: Reduce stack usage
scsi: ufs: host: mediatek: Require CONFIG_PM
scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
scsi: mpi3mr: Make driver probing asynchronous
scsi: ufs: core: Flush exception handling work when RPM level is zero
scsi: efct: Use IRQF_ONESHOT and default primary handler
scsi: ufs: core: Use a host-wide tagset in SDB mode
scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: mpi3mr: Driver version update to 8.17.0.3.50
scsi: mpi3mr: Fixed the W=1 compilation warning
scsi: mpi3mr: Record and report controller firmware faults
scsi: mpi3mr: Update MPI Headers to revision 39
scsi: mpi3mr: Use negotiated link rate from DevicePage0
scsi: mpi3mr: Avoid redundant diag-fault resets
scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
scsi: mpi3mr: Add module parameter to control threaded IRQ polling
...
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
-----BEGIN PGP SIGNATURE-----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=LIjp
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
- Add the missing IRQF_COND_ONESHOT flag to devm_request_irq()
This is inconsistent vs. request_irq() and causes the same issues which
where addressed with the introduction of this flag
- Cleanup IRQF_ONESHOT and IRQF_NO_THREAD usage
Quite some drivers have inconsistent interrupt request flags related to
interrupt threading namely IRQF_ONESHOT and IRQF_NO_THREAD. This leads to
warnings and/or malfunction when forced interrupt threading is enabled.
- Remove stub primary (hard interrupt) handlers
A bunch of drivers implement a stub primary (hard interrupt) handler which
just returns IRQ_WAKE_THREAD. The same functionality is provided by the
core code when the primary handler argument of request_thread_irq() is set
to NULL.
-----BEGIN PGP SIGNATURE-----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=vrmm
-----END PGP SIGNATURE-----
Merge tag 'irq-cleanups-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A series of treewide cleanups to ensure interrupt request consistency.
- Add the missing IRQF_COND_ONESHOT flag to devm_request_irq()
This is inconsistent vs request_irq() and causes the same issues
which where addressed with the introduction of this flag
- Cleanup IRQF_ONESHOT and IRQF_NO_THREAD usage
Quite some drivers have inconsistent interrupt request flags
related to interrupt threading namely IRQF_ONESHOT and
IRQF_NO_THREAD. This leads to warnings and/or malfunction when
forced interrupt threading is enabled.
- Remove stub primary (hard interrupt) handlers
A bunch of drivers implement a stub primary (hard interrupt)
handler which just returns IRQ_WAKE_THREAD. The same functionality
is provided by the core code when the primary handler argument of
request_thread_irq() is set to NULL"
* tag 'irq-cleanups-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
media: pci: mg4b: Use IRQF_NO_THREAD
mfd: wm8350-core: Use IRQF_ONESHOT
thermal/qcom/lmh: Replace IRQF_ONESHOT with IRQF_NO_THREAD
rtc: amlogic-a4: Remove IRQF_ONESHOT
usb: typec: fusb302: Remove IRQF_ONESHOT
EDAC/altera: Remove IRQF_ONESHOT
char: tpm: cr50: Remove IRQF_ONESHOT
ARM: versatile: Remove IRQF_ONESHOT
scsi: efct: Use IRQF_ONESHOT and default primary handler
Bluetooth: btintel_pcie: Use IRQF_ONESHOT and default primary handler
bus: fsl-mc: Use default primary handler
mailbox: bcm-ferxrm-mailbox: Use default primary handler
iommu/amd: Use core's primary handler and set IRQF_ONESHOT
platform/x86: int0002: Remove IRQF_ONESHOT from request_irq()
genirq: Set IRQF_COND_ONESHOT in devm_request_irq().
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers (Juan
Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the closest
timer event when the scheduler tick has been stopped to prevent it
from mistakenly selecting the deepest available idle state (Rafael
Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal decisions
in certain corner cases and generally improve idle state selection
accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers (Breno
Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer (Christian
Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping
driver (Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the energy
model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of systemd's
unit file (João Marcos Costa)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmmDr5ASHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1Q8oH/0KRqdidHzesIQl6gd5WSS/sWdxODRUt
R9dEGQQ6LXCY0z05RAq29HZQf618fYuRFX4PSrtyCvrcRJK7MJKuzK55MRq0MC3c
c/2pL1PdpHexjLXUP9pcoxrYjetsr7SnD6Y0M3JfOPg1E/bG8sp1DlnE8cdqrL0W
lrdB2cEGewT2SVkNhCIQ2n6bwfQwmLlfQl1vXTM8BA7xCjoslePUJlRphAFVAt/J
5fQxSOH0eSxK5PYQFUDM2D2J3uMAN0pFb6eIjwVYYqjABqV//BPl99Rv2W3ElJq7
K/SICRWlvzyINCgF15QAUtQHWdINxSb0GzovECVxODHOv0N4mKHdpNU=
=QlVe
-----END PGP SIGNATURE-----
Merge tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of commits, cpufreq is the leading party (again) and the
most visible change there is the removal of the omap-cpufreq driver
that has not been used for a long time (good riddance). There are also
quite a few changes in the cppc_cpufreq driver, mostly related to
fixing its frequency invariance engine in the case when the CPPC
registers used by it are not in PCC. In addition to that, support for
AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
list is updated for some platforms. The remaining cpufreq changes are
assorted fixes and cleanups.
Next up is cpuidle and the changes there are dominated by intel_idle
driver updates, mostly related to the new command line facility
allowing users to adjust the list of C-states used by the driver.
There are also a few updates of cpuidle governors, including two menu
governor fixes and some refinements of the teo governor, and a
MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
[Thanks for stepping up Christian!]
The most significant update related to system suspend and hibernation
is the one to stop freezing the PM runtime workqueue during system PM
transitions which allows some deadlocks to be avoided. There is also a
fix for possible concurrent bit field updates in the core device
suspend code and a few other minor fixes.
Apart from the above, several drivers are updated to discard the
return value of pm_runtime_put() which is going to be converted to a
void function as soon as everybody stops using its return value, PL4
support for Ice Lake is added to the Intel RAPL power capping driver,
and there are assorted cleanups, documentation fixes, and some
cpupower utility improvements.
Specifics:
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers
(Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the
closest timer event when the scheduler tick has been stopped to
prevent it from mistakenly selecting the deepest available idle
state (Rafael Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal
decisions in certain corner cases and generally improve idle state
selection accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers
(Breno Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
(Christian Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael
Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping driver
(Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the
energy model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of
systemd's unit file (João Marcos Costa)"
* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
cpufreq: Documentation: Update description of rate_limit_us default value
cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: EM: Documentation: Fix bug in example code snippet
Documentation: Fix typos in energy model documentation
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpufreq: ondemand: Simplify idle cputime granularity test
cpufreq: userspace: make scaling_setspeed return the actual requested frequency
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
cpufreq: CPPC: Add generic helpers for sysfs show/store
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
...
Introduce support for Thunderbolt (TBT) alternate mode to the UCSI driver.
This allows the driver to manage the entry and exit of TBT altmode by
providing the necessary typec_altmode_ops.
ucsi_altmode_update_active() is invoked when the Connector Partner Changed
bit is set in the GET_CONNECTOR_STATUS data. This ensures that the
alternate mode's active state is synchronized with the current mode the
connector is operating in.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260206115754.828954-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check regulator state as peripheral and detach can disable vbus.
Without this check we will try to disable the regulator twice if
we disconnect host and then connect as device.
Fixes: 27fbc19e52 ("usb: typec: hd3ss3220: Enable VBUS based on role state")
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linu.intel.com>
Link: https://patch.msgid.link/20260206-wip-jremmet-hd3ss3220_vbus_split-v4-1-ee5b4e402187@phytec.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When all files are closed, functionfs needs ffs_data_reset() to be
done before any further opens are allowed.
During that time we have ffs->state set to FFS_CLOSING; that makes
->open() fail with -EBUSY. Once ffs_data_reset() is done, it
switches state (to FFS_READ_DESCRIPTORS) indicating that opening
that thing is allowed again. There's a couple of additional twists:
* mounting with -o no_disconnect delays ffs_data_reset()
from doing that at the final ->release() to the first subsequent
open(). That's indicated by ffs->state set to FFS_DEACTIVATED;
if open() sees that, it immediately switches to FFS_CLOSING and
proceeds with doing ffs_data_reset() before returning to userland.
* a couple of usb callbacks need to force the delayed
transition; unfortunately, they are done in locking environment
that does not allow blocking and ffs_data_reset() can block.
As the result, if these callbacks see FFS_DEACTIVATED, they change
state to FFS_CLOSING and use schedule_work() to get ffs_data_reset()
executed asynchronously.
Unfortunately, the locking is rather insufficient. A fix attempted
in e5bf5ee266 ("functionfs: fix the open/removal races") had closed
a bunch of UAF, but it didn't do anything to the callbacks, lacked
barriers in transition from FFS_CLOSING to FFS_READ_DESCRIPTORS
_and_ it had been too heavy-handed in open()/open() serialization -
I've used ffs->mutex for that, and it's being held over actual IO on
ep0, complete with copy_from_user(), etc.
Even more unfortunately, the userland side is apparently racy enough
to have the resulting timing changes (no failures, just a delayed
return of open(2)) disrupt the things quite badly. Userland bugs
or not, it's a clear regression that needs to be dealt with.
Solution is to use a spinlock for serializing these state checks and
transitions - unlike ffs->mutex it can be taken in these callbacks
and it doesn't disrupt the timings in open().
We could introduce a new spinlock, but it's easier to use the one
that is already there (ffs->eps_lock) instead - the locking
environment is safe for it in all affected places.
Since now it is held over all places that alter or check the
open count (ffs->opened), there's no need to keep that atomic_t -
int would serve just fine and it's simpler that way.
Fixes: e5bf5ee266 ("functionfs: fix the open/removal races")
Fixes: 18d6b32fca ("usb: gadget: f_fs: add "no_disconnect" mode") # v4.0
Tested-by: Samuel Wu <wusamuel@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The PORTSC1 register has a different offset in Tegra20 compared to
Tegra30+, yet they share a crucial set of registers required for HSIC
functionality. Reflect this register offset change in the SoC config.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://patch.msgid.link/20260202080526.23487-5-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parallel transceiver select used in HSIC mode differs on Tegra20,
where it uses the UTMI value (0), whereas Tegra30+ uses a dedicated HSIC
value. Reflect this in the SoC config.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://patch.msgid.link/20260202080526.23487-4-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return exact error value from utmi_wait_register during HSIC power on.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://patch.msgid.link/20260202080526.23487-3-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change TEGRA_USB_HOSTPC1_DEVLC_PTS_HSIC to its literal value instead of
using the BIT macro, as it is an enumeration. Correct the spelling in the
comment and rename uhsic_registers_shift to uhsic_registers_offset.
These changes are cosmetic and do not affect code behavior.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://patch.msgid.link/20260202080526.23487-2-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13b1f8e25b ("usb: dwc2: Force mode optimizations") removed the
dwc2_force_mode(hsotg, true) in dwc2_force_dr_mode() if dr_mode is host.
But this brings a bug: the controller fails to resume back as host,
further debugging shows that the controller is resumed as peripheral.
The reason is dwc2_force_dr_mode() missed the host mode forcing, and
when resuming from s2ram, GINTSTS is 0 by default, dwc2_is_device_mode
in dwc2_resume() misreads this as the controller is in peripheral mode.
Fix the resume failure by adding back the dwc2_force_mode(hsotg, true).
Then an obvious question is: why this bug hasn't been observed and fixed
for about six years? There are two resons: most dwc2 platforms set the
dr_mode as otg; Some platforms don't have suspend & resume support yet.
Fixes: 13b1f8e25b ("usb: dwc2: Force mode optimizations")
Cc: stable <stable@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260129021534.10411-1-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the role change while we are suspended, the cdns3 driver switches to the
new mode during resume. However, switching to host mode in this context
causes a NULL pointer dereference.
The host role's start() operation registers a xhci-hcd device, but its
probe is deferred while we are in the resume path. The host role's resume()
operation assumes the xhci-hcd device is already probed, which is not the
case, leading to the dereference. Since the start() operation of the new
role is already called, the resume operation can be skipped.
So skip the resume operation for the new role if a role switch occurs
during resume. Once the resume sequence is complete, the xhci-hcd device
can be probed in case of host mode.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208
Mem abort info:
...
Data abort info:
...
[0000000000000208] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted
6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT
Hardware name: Texas Instruments J7200 EVM (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usb_hcd_is_primary_hcd+0x0/0x1c
lr : cdns_host_resume+0x24/0x5c
...
Call trace:
usb_hcd_is_primary_hcd+0x0/0x1c (P)
cdns_resume+0x6c/0xbc
cdns3_controller_resume.isra.0+0xe8/0x17c
cdns3_plat_resume+0x18/0x24
platform_pm_resume+0x2c/0x68
dpm_run_callback+0x90/0x248
device_resume+0x100/0x24c
dpm_resume+0x190/0x2ec
dpm_resume_end+0x18/0x34
suspend_devices_and_enter+0x2b0/0xa44
pm_suspend+0x16c/0x5fc
state_store+0x80/0xec
kobj_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x130/0x1dc
vfs_write+0x240/0x370
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0x108
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401)
---[ end trace 0000000000000000 ]---
Cc: stable <stable@kernel.org>
Fixes: 2cf2581cd2 ("usb: cdns3: add power lost support for system resume")
Signed-off-by: Thomas Richard (TI) <thomas.richard@bootlin.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260130-usb-cdns3-fix-role-switching-during-resume-v1-1-44c456852b52@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently dwc3_gadget_vbus_draw() can be called from atomic
context, which in turn invokes power-supply-core APIs. And
some these PMIC APIs have operations that may sleep, leading
to kernel panic.
Fix this by moving the vbus_draw into a workqueue context.
Fixes: 99288de360 ("usb: dwc3: add an alternate path in vbus_draw callback")
Cc: stable <stable@kernel.org>
Tested-by: Samuel Wu <wusamuel@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204054155.3063825-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some new modem device ids for 6.20-rc1.
Everything has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaYN00BsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDIACgkQC8XNwux9ZQiMEQD/cdK1J++w+QgeyIq/uGa9
vUVgZnkD26ZsWKU6xnBNYo8BAJDmomuSR67ruPLjLEDcgGIrmx+bbsHHS9O5Vuol
ojIB
=rC4M
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial device ids for 6.20-rc1
Here are some new modem device ids for 6.20-rc1.
Everything has been in linux-next with no reported issues.
* tag 'usb-serial-6.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN920C04 RNDIS compositions
Merge updates related to runtime PM for 6.20-rc1/7.0-rc1:
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
* pm-runtime:
drm: Discard pm_runtime_put() return value
genirq/chip: Change irq_chip_pm_put() return type to void
scsi: ufs: core: Discard pm_runtime_put() return values
platform/chrome: cros_hps_i2c: Discard pm_runtime_put() return value
coresight: Discard pm_runtime_put() return values
hwspinlock: omap: Discard pm_runtime_put() return value
watchdog: rzv2h_wdt: Discard pm_runtime_put() return value
watchdog: rz: Discard pm_runtime_put() return values
media: ccs: Discard pm_runtime_put() return value
drm/imagination: Discard pm_runtime_put() return value
USB: core: Discard pm_runtime_put() return value
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Fixes: 309b6341d5 ("usb: typec: fusb302: Revert incorrect threaded irq fix")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-12-bigeasy@linutronix.de
When multiple DWC3 controllers are being used, trace events from
different instances get mixed up making debugging difficult as
there's no way to distinguish which instance generated the trace.
Use the register base address of dwc3 controller and append it to
trace events, so that the source instance is clearly identifiable.
Example trace output,
before -> dwc3_event: event (00000101): Reset [U0]
after -> dwc3_event: 0x000000000a600000: event (00000101): Reset [U0]
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260122105000.4126769-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The COREPLL_PWRDN bit in the BLCG register must be set when the XUSB
device controller is powergated and cleared when it is unpowergated.
If this bit is not explicitly controlled, the core PLL may remain in an
incorrect power state across suspend/resume or ELPG transitions.
Therefore, update the driver to explicitly control this bit during
powergate transitions.
Fixes: 49db427232 ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Cc: stable <stable@kernel.org>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://patch.msgid.link/20260123173121.4093902-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning
option has been introduced. This warning is enabled by default and can
be used to catch .queuecommand() implementations that return another
value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch
that changes the return type of the .queuecommand() implementations from
'int' into 'enum scsi_qc_status'. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for HSIC USB mode, which can be set for second USB controller
and PHY on Tegra SoC along with already supported UTMI or ULPI.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://patch.msgid.link/20260122151125.7367-3-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor to directly use enum usb_phy_interface to determine the PHY mode.
This change is in preparation for adding support for HSIC mode.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://patch.msgid.link/20260122151125.7367-2-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mode selection sequence is initiated by the driver after all partner
alternate modes have been successfully registered.
When a partner is disconnected, the driver also stops the mode selection
process and releases resources via `typec_mode_selection_delete`.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-8-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the ucsi port driver supports modes selection, it should implement
`add_partner_altmodes` and `remove_partner_altmodes` ucsi operations. With
these operations the driver can manage the mode selection process.
Once partner altmodes are registered, `add_partner_altmodes` is called to
start the mode selection. When the partner is unregistered,
`remove_partner_altmodes` is supposed to stop any ongoing processes and
clean up the resources.
`typec_altmode_state_update` informes mode selection about the current mode
of the Type-C connector.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-7-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port driver sets this bit for an alternate mode description to indicate
support for the mode selection feature. Once set, individual Alt Mode
drivers will no longer attempt to activate their respective modes within
their probe functions. This prevents race conditions and non-prioritized
activation.
The bit is not set by default. If left unset, the system retains the
current behavior where Alt Mode drivers manage their own activation logic.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-6-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mode selection process is controlled by the following API functions,
which allow to initiate and complete mode entry based on the priority of
each mode:
`typec_mode_selection_start` function compiles a priority list of supported
Alternate Modes.
`typec_altmode_state_update` function is invoked by the port driver to
communicate the current mode of the Type-C connector.
`typec_mode_selection_delete` function stops the currently running mode
selection process and releases all associated system resources.
`mode_selection_work_fn` task attempts to activate modes. The process stops
on success; otherwise, it proceeds to the next mode after a timeout or
error.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-5-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces a priority sysfs attribute to the USB Type-C
alternate mode port interface. This new attribute allows user-space to
configure the numeric priority of alternate modes managing their preferred
order of operation. If a new priority value conflicts with an existing
mode's priority, the priorities of the conflicting mode and all subsequent
modes are automatically incremented to ensure uniqueness.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-4-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This new field in the port properties dictates whether the Platform Policy
Manager (PPM) allows the OS Policy Manager (OPM) to change the currently
active, negotiated alternate mode.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260119131824.2529334-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The generic USB PHY driver uses the existence of the "clocks" property
to see if a clock is optional or not. Use devm_clk_get_optional()
instead, which exists for this purpose. As usb_phy_generic.clk is now
either a valid clock pointer or NULL, and all clock operations handle
NULL pointers gracefully, several IS_ERR() checks can be removed,
simplifying the code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
...
Link: https://patch.msgid.link/5cc21d821edf5d40f56a74cd251bb1b982876b72.1769004444.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bdc_run() can be ran during atomic context leading to a sleep during
atomic warning. Fix this by replacing read_poll_timeout() with
read_poll_timeout_atomic().
Fixes: 75ae051efc ("usb: gadget: bdc: use readl_poll_timeout() to simplify code")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260120200754.2488765-1-justin.chen@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add dbc_manufacturer sysfs attribute to allow changing the manufacturer
description presented by the debug device when a host requests a string
descriptor with iManufacturer index.
Value can only be changed while debug capability (DbC) is in disabled
state to prevent USB device descriptor change while connected to a USB
host.
The default value is "Linux Foundation".
The string length can be from 1 to 126 characters.
String is terminated at null or newline, driver does not support empty
string.
[ mn: Improve commit message and sysfs entry documentation ]
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260120181148.128712-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add dbc_product sysfs attribute to allow changing the product description
presented by the debug device when a host requests a string descriptor
with iProduct index.
Value can only be changed while debug capability (DbC) is in disabled
state to prevent USB device descriptor change while connected to a USB
host.
The default value is "Linux USB Debug Target".
The field length can be from 1 to 126 characters.
String is terminated at null or newline, driver does not support empty
string.
[ mn: Improve commit message and sysfs entry documentation ]
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260120181148.128712-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add dbc_serial sysfs attribute to allow changing the serial number
string descriptor presented by the debug device when a host requests a
string descriptor with iSerialNumber index.
Value can only be changed while debug capability (DbC) is in disabled
state to prevent USB device descriptor change while connected to a USB
host.
The default value is "0001".
The field length can be from 1 to 126 characters.
String is terminated at null or newline, driver does not support empty
string.
[ mn: Improve commit message and sysfs entry documentation ]
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260120181148.128712-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reorganize the code to prepare ground for setting serial number,
product and manufacturer names through sysfs. This commit:
1. Introduces new buffers for storing serial number, product and
manufacturer name in utf8. The buffers will be used by sysfs
*_show and *_store functions.
2. Increases USB string descriptor data maximum length to the
value from USB specification (126 bytes of data).
3. Adds new helper functions get_str_desc_len, prepare_len
and xhci_dbc_populate_str_desc.
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260120181148.128712-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For systems where the ID pin isn't available as gpio use the ATTACHED_STATE
register instead to control vbus.
>From the datasheet:
"This is an additional method to communicate attach other
than the ID pin. These bits can be read by the application to
determine what was attached."
Use this method if id-gpios property is not set, but the connector node
has vbus-supply defined.
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260115-wip-jremmet-hd3ss3220_vbus-v1-1-b7d9adfbe346@phytec.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The platform_get_irq_byname() function already prints an error message
internally upon failure using dev_err_probe(). Therefore, the explicit
dev_err() is redundant and results in duplicate error logs.
Remove the redundant dev_err() call to clean up the error path.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260115023800.4142416-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We found that calling irq_dispose_mapping() caused a kernel warning
when removing the driver. The IRQs are obtained using
platform_get_irq(), which returns a Linux virtual IRQ number directly
managed by the device core, not by the OF subsystem. Therefore, the
driver should not call irq_dispose_mapping() for these IRQs.
Fixes: 5df186e2ef ("usb: xhci: tegra: Support USB wakeup function for Tegra234")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Link: https://patch.msgid.link/20260115103621.587366-1-weichengc@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The WCH CH334/CH335[0] are USB2.0 protocol compliant 4-port USB HUB
controller chips, supporting USB2.0 high-speed and full-speed for
upstream ports, and USB2.0 high-speed 480Mbps, full-speed 12Mbps and
low-speed 1.5Mbps for downstream ports, supporting not only low-cost STT
mode (single TT schedules 4 downstream ports in time share), but also
supports high performance MTT mode (4 TTs each corresponding to 1 port,
concurrent processing).
[0]: https://www.wch-ic.com/downloads/CH334DS1_PDF.html
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Link: https://patch.msgid.link/20260113095827.115-3-kernel@airkyi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use dwc pointer in dwc3_readl() dwc3_writel() instead of passing
the dwc->regs. This would help us access the dwc structure and
log the base address in traces. There's no functional changes in
this patch, just refactoring existing APIs.
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260114100748.2950103-3-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove dep->regs from struct dwc3_ep and reuse dwc->regs instead.
Thus eliminating redundant iomem addresses and making register
access more consistent across the driver.
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260114100748.2950103-2-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_sideband_remove_endpoint() incorrecly assumes that the endpoint is
running and has a valid transfer ring.
Lianqin reported a crash during suspend/wake-up stress testing, and
found the cause to be dereferencing a non-existing transfer ring
'ep->ring' during xhci_sideband_remove_endpoint().
The endpoint and its ring may be in unknown state if this function
is called after xHCI was reinitialized in resume (lost power), or if
device is being re-enumerated, disconnected or endpoint already dropped.
Fix this by both removing unnecessary ring access, and by checking
ep->ring exists before dereferencing it. Also make sure endpoint is
running before attempting to stop it.
Remove the xhci_initialize_ring_info() call during sideband endpoint
removal as is it only initializes ring structure enqueue, dequeue and
cycle state values to their starting values without changing actual
hardware enqueue, dequeue and cycle state. Leaving them out of sync
is worse than leaving it as it is. The endpoint will get freed in after
this in most usecases.
If the (audio) class driver want's to reuse the endpoint after offload
then it is up to the class driver to ensure endpoint is properly set up.
Reported-by: 胡连勤 <hulianqin@vivo.com>
Closes: https://lore.kernel.org/linux-usb/TYUPR06MB6217B105B059A7730C4F6EC8D2B9A@TYUPR06MB6217.apcprd06.prod.outlook.com/
Tested-by: 胡连勤 <hulianqin@vivo.com>
Fixes: de66754e9f ("xhci: sideband: add initial api to register a secondary interrupter entity")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260115233758.364097-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's a fix for an f81232 enumeration issue that could prevent some
ports from being enabled (e.g. during driver rebind).
Included are also some new device ids.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaWoQSRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDIACgkQC8XNwux9ZQhodAEA8zxaqwYjUT1ot4PaujAk
kByHySPyDVy3/cfXSboxqkQBAM9lv1DiIuNZV5NEdhIRVXEXjbMG6hUrzXVOdZM6
xEgL
=CG1a
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.19-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial fix for 6.19-rc6
Here's a fix for an f81232 enumeration issue that could prevent some
ports from being enabled (e.g. during driver rebind).
Included are also some new device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.19-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: f81232: fix incomplete serial port generation
USB: serial: ftdi_sio: add support for PICAXE AXE027 cable
USB: serial: option: add Telit LE910 MBIM composition
Based on the reality[1][2] that vb2_dma_sg_alloc() can't alloc buffer with
device DMA limits, those device will always get below error: "swiotlb
buffer is full (sz: 393216 bytes), total 65536 (slots), used 2358 (slots)"
and the uvc gadget function can't work at all.
The videobuf2-dma-sg.c driver doesn't has a formal improve about this issue
till now. For UVC gadget, the videobuf2 subsystem doesn't do dma_map() on
vmalloc returned big buffer when allocate the video buffers, however, it do
it for dma_sg returned buffer. So the issue happens for vb2_dma_sg_alloc().
To workaround the issue, lets retry vb2_reqbufs() with
vb_vmalloc_memops if it fails to allocate buffer with vb2_dma_sg_memops.
If use vmalloced buffer, UVC gadget will allocate some small buffers for
each usb_request to do dma transfer, then uvc driver will memcopy data
from big buffer to small buffer.
Link[1]: https://lore.kernel.org/linux-media/20230828075420.2009568-1-anle.pan@nxp.com/
Link[2]: https://lore.kernel.org/linux-media/20230914145812.12851-1-hui.fang@nxp.com/
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-4-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uvcg_queue_init() may fail, but its return value is currently ignored.
Propagate the error code from uvcg_queue_init() to correctly report
initialization failures.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-3-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to USB specification:
For full-/high-speed isochronous endpoints, the bInterval value is
used as the exponent for a 2^(bInterval-1) value.
To correctly convert bInterval as interval_duration:
interval_duration = 2^(bInterval-1) * frame_interval
Because the unit of video->interval is 100ns, add a comment info to
make it clear.
Fixes: 48dbe73117 ("usb: gadget: uvc: set req_size and n_requests based on the frame interval")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-2-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current req_payload_size calculation has 2 issue:
(1) When the first time calculate req_payload_size for all the buffers,
reqs_per_frame = 0 will be the divisor of DIV_ROUND_UP(). So
the result is undefined.
This happens because VIDIOC_STREAMON is always executed after
VIDIOC_QBUF. So video->reqs_per_frame will be 0 until VIDIOC_STREAMON
is run.
(2) The buf->req_payload_size may be bigger than max_req_size.
Take YUYV pixel format as example:
If bInterval = 1, video->interval = 666666, high-speed:
video->reqs_per_frame = 666666 / 1250 = 534
720p: buf->req_payload_size = 1843200 / 534 = 3452
1080p: buf->req_payload_size = 4147200 / 534 = 7766
Based on such req_payload_size, the controller can't run normally.
To fix above issue, assign max_req_size to buf->req_payload_size when
video->reqs_per_frame = 0. And limit buf->req_payload_size to
video->req_size if it's large than video->req_size. Since max_req_size
is used at many place, add it to struct uvc_video and set the value once
endpoint is enabled.
Fixes: 98ad032915 ("usb: gadget: uvc: set req_length based on payload by nreqs instead of req_size")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-1-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ignore USB role switches if dwc3-apple is already in the desired state.
The USB-C port controller on M2 and M1/M2 Pro/Max/Ultra devices issues
additional interrupts which result in USB role switches to the already
active role.
Ignore these USB role switches to ensure the USB-C port controller and
dwc3-apple are always in a consistent state. This matches the behaviour
in __dwc3_set_mode() in core.c.
Fixes detecting USB 2.0 and 3.x devices on the affected systems. The
reset caused by the additional role switch appears to leave the USB
devices in a state which prevents detection when the phy and dwc3 is
brought back up again.
Fixes: 0ec946d32e ("usb: dwc3: Add Apple Silicon DWC3 glue layer driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Tested-by: Sven Peter <sven@kernel.org> # M1 mac mini and macbook air
Link: https://patch.msgid.link/20260109-apple-dwc3-role-switch-v1-1-11623b0f6222@jannau.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When some wake IRQs are disabled in the device tree, the corresponding
interrupt entries are removed from DT. In such cases, the driver
currently calls platform_get_irq(), which returns -ENXIO and logs
an error like:
tegra-xusb 3610000.usb: error -ENXIO: IRQ index 2 not found
However, not all wake IRQs are mandatory. The hardware can operate
normally even if some wake sources are not defined in DT. To avoid this
false alarm and allow missing wake IRQs gracefully, use
platform_get_irq_optional() instead of platform_get_irq().
Fixes: 5df186e2ef ("usb: xhci: tegra: Support USB wakeup function for Tegra234")
Cc: stable <stable@kernel.org>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260112145653.95691-1-weichengc@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9beeee6584 ("USB: EHCI: log a warning if ehci-hcd is not
loaded first") said that ehci-hcd should be loaded before ohci-hcd and
uhci-hcd. However, commit 05c92da0c5 ("usb: ohci/uhci - add soft
dependencies on ehci_pci") only makes ohci-pci/uhci-pci depend on ehci-
pci, which is not enough and we may still see the warnings in boot log.
To eliminate the warnings we should make ohci-hcd/uhci-hcd depend on
ehci-hcd. But Alan said that the warning introduced by 9beeee6584
is bogus, we only need the soft dependencies in the PCI level rather
than the HCD level.
However, there is really another neccessary soft dependencies between
ohci-platform/uhci-platform and ehci-platform, which is added by this
patch. The boot logs are below.
1. ohci-platform loaded before ehci-platform:
ohci-platform 1f058000.usb: Generic Platform OHCI controller
ohci-platform 1f058000.usb: new USB bus registered, assigned bus number 1
ohci-platform 1f058000.usb: irq 28, io mem 0x1f058000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usb 1-4: new low-speed USB device number 2 using ohci-platform
ehci-platform 1f050000.usb: EHCI Host Controller
ehci-platform 1f050000.usb: new USB bus registered, assigned bus number 2
ehci-platform 1f050000.usb: irq 29, io mem 0x1f050000
ehci-platform 1f050000.usb: USB 2.0 started, EHCI 1.00
usb 1-4: device descriptor read/all, error -62
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 1-4: new low-speed USB device number 3 using ohci-platform
input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@10000000/1f058000.usb/usb1/1-4/1-4:1.0/0003:10C4:8105.0001/input/input0
hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-1f058000.usb-4/input0
2. ehci-platform loaded before ohci-platform:
ehci-platform 1f050000.usb: EHCI Host Controller
ehci-platform 1f050000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1f050000.usb: irq 28, io mem 0x1f050000
ehci-platform 1f050000.usb: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci-platform 1f058000.usb: Generic Platform OHCI controller
ohci-platform 1f058000.usb: new USB bus registered, assigned bus number 2
ohci-platform 1f058000.usb: irq 29, io mem 0x1f058000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 2-4: new low-speed USB device number 2 using ohci-platform
input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@10000000/1f058000.usb/usb2/2-4/2-4:1.0/0003:10C4:8105.0001/input/input0
hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-1f058000.usb-4/input0
In the later case, there is no re-connection for USB-1.0/1.1 devices,
which is expected.
Cc: stable <stable@kernel.org>
Reported-by: Shengwen Xiao <atzlinux@sina.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260112084802.1995923-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the upstream code has been getting broader test coverage by our
users we occasionally see issues with USB2 devices plugged in during boot.
Before Linux is running, the USB2 PHY has usually been running in device
mode and it turns out that sometimes host->device or device->host
transitions don't work.
The root cause: If the role inside the USB2 PHY is re-configured when it
has already been powered on or when dwc3 has already enabled the ULPI
interface the new configuration sometimes doesn't take affect until dwc3
is reset again. Fix this rare issue by configuring the role much earlier.
Note that the USB3 PHY does not suffer from this issue and actually
requires dwc3 to be up before the correct role can be configured there.
Reported-by: James Calligeros <jcalligeros99@gmail.com>
Reported-by: Janne Grunau <j@jannau.net>
Fixes: 0ec946d32e ("usb: dwc3: Add Apple Silicon DWC3 glue layer driver")
Cc: stable <stable@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Janne Grunau <j@jannau.net>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20260109-dwc3-apple-usb2phy-fix-v2-1-ab6b041e3b26@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.
The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.
Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists
This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted).
Signed-off-by: Mario Peter <mario.peter@leica-geosystems.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260108165902.795354-1-mario.peter@leica-geosystems.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the wakeup and controller interrupt name are same. It's not
easy to find the correct one in /proc/interrupt at the first glance.
Rename the wakeup interrupt name for better distinction.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260112110408.3263954-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we don't have a usb3 phy we don't need to assert the core resets.
Deassert them even if we didn't assert them to support booting when the
bootloader never released the core from reset.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260106171018.501612-1-sean.anderson@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It turns out that warning about which USB host controller is loaded
before another one doesn't really matter. All that really is needed is
the PCI softdep module loading logic, which has been present in the
kernel ever since commit 05c92da0c5 ("usb: ohci/uhci - add soft
dependencies on ehci_pci")
So remove the warning messages, they are not useful, not needed, and
only confuse people. As can be seen in the discussion at
https://lore.kernel.org/r/20251230080014.3934590-1-chenhuacai@loongson.cn
Cc: Huacai Chen <chenhuacai@loongson.cn>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/2026010739-diffuser-shelter-e31c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do dwc3 core auto suspend enable for device and disable for host
, this can make sure dwc3 core device auto suspend setting is
correct all the time, the background of disable dwc3 core device
auto suspend is to make its parent device suspend immediately
(so wakeup enable can be enabled) after xhci-plat device suspended,
for device mode, we keep the dwc3 core device auto suspend is to
give some wait for gadget to be enumerated.
Note: It's a temporary solution until we switch to using the new
flatten model.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260108081433.2119328-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's confuse to let "dwc3" represent a platform_device, because "dwc3"
may also represent a dwc3 core structure. Rename it for better
distinction.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260108081433.2119328-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call dwc3_pre_set_role() to support both extcon and otg usecase, so that
the glue driver can do proper action in case of role changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260108081433.2119328-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, DMA_FROM_DEVICE is used when attaching DMABUFs to IN
endpoints and DMA_TO_DEVICE for OUT endpoints. This is inverted from
how it should be.
The result is IOMMU read-only mappings placed on OUT queues,
triggering arm-smmu write faults.
Put differently, OUT endpoints flow data from host -> gadget, meaning
the UDC peripheral needs to have write access to the buffer to fill it
with the incoming data.
This commit flips the directions and updates the implicit-sync helpers
so IN endpoints act as readers and OUT endpoints as writers.
Signed-off-by: Sam Day <me@samcday.com>
Tested-by: David Heidelberg <david@ixit.cz> # OnePlus 6T on sdm845-next-20251119
Link: https://patch.msgid.link/20260108-ffs-dmabuf-ioctl-fix-v1-2-e51633891a81@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ffs_epfile_ioctl handles FUNCTIONFS_DMABUF_* ioctls, it's currently
falling through when copy_from_user fails.
However, this fallthrough isn't being checked properly, so the handler
continues executing further than it should. It then tries the secondary
dispatch where it ultimately gives up and returns -ENOTTY.
The end result is invalid ioctl invocations will yield a -ENOTTY rather
than an -EFAULT.
It's a common pattern elsewhere in the kernel code to directly return
-EFAULT when copy_from_user fails. So we update ffs_epfile_ioctl to do
the same and fix this issue.
Signed-off-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20260108-ffs-dmabuf-ioctl-fix-v1-1-e51633891a81@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In usbg_submit_command(), which handles the UAS protocol, the 'data_len'
member of the 'usbg_cmd' structure was left uninitialized by the
logic, relying instead on the zeroing performed by usbg_get_cmd().
In contrast, the BOT path (bot_submit_command) explicitly initializes
this field from the Command Block Wrapper (CBW). This discrepancy is
evident in error handling paths where __target_init_cmd() is called
using cmd->data_len.
Explicitly initialize cmd->data_len to 0 in the UAS path and use this
variable when calling target_submit_cmd(). This ensures architectural
consistency between the UAS and BOT protocols within the driver and
avoids reliance on implicit memory state during error transitions.
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://patch.msgid.link/20260107190622.26070-1-jiashengjiangcool@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Fintek F81532A/534A/535/536 family relies on the
F81534A_CTRL_CMD_ENABLE_PORT (116h) register during initialization to
both determine serial port status and control port creation. If the
driver experiences fast load/unload cycles, the device state may becomes
unstable, resulting in the incomplete generation of serial ports.
Performing a dummy read operation on the register prior to the initial
write command resolves the issue. This clears the device's stale internal
state. Subsequent write operations will correctly generate all serial
ports.
This patch also removes the retry loop in f81534a_ctrl_set_register()
because the stale state has been fixed.
Tested on: HygonDM1SLT(Hygon C86 3250 8-core Processor)
Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Signed-off-by: Johan Hovold <johan@kernel.org>
Add PCI_VENDOR_ID_ASPEED to the shared pci_ids.h header and remove the
duplicate local definition from ehci-pci.c.
This prepares for adding a PCI quirk for ASPEED devices.
Signed-off-by: Nirmoy Das <nirmoyd@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patch.msgid.link/20251217154529.377586-1-nirmoyd@nvidia.com
To allow the return type of pm_runtime_put() to be changed to void in the
future, modify usb_autopm_put_interface_async() to discard the return
value of pm_runtime_put().
That value is merely used in a debug comment printed by the function in
question and it is not a particularly useful piece of information
because pm_runtime_put() does not guarantee that the device will be
suspended even if it successfully queues up a work item to check
whether or not the device can be suspended.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/5058509.GXAFRqVoOG@rafael.j.wysocki
Add USB_QUIRK_NO_BOS quirk flag to skip requesting the BOS descriptor
for devices that cannot handle it.
Add Elgato 4K X (0fd9:009b) to the quirk table. This device hangs when
the BOS descriptor is requested at SuperSpeed Plus (10Gbps).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220027
Cc: stable <stable@kernel.org>
Signed-off-by: Johannes Brüderl <johannes.bruederl@gmail.com>
Link: https://patch.msgid.link/20251207090220.14807-1-johannes.bruederl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If ports are defined in the tcpc main node, fwnode_usb_role_switch_get()
returns an error, meaning usb_role_switch_get() (which would succeed)
never gets a chance to run as port->role_sw isn't NULL, causing a
regression on devices where this is the case.
Fix this by turning the NULL check into IS_ERR_OR_NULL(), so
usb_role_switch_get() can actually run and the device get properly probed.
Fixes: 2d8713f807 ("tcpm: switch check for role_sw device with fw_node")
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Link: https://patch.msgid.link/20260105-fix-ppp-power-v2-1-6924f5a41224@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Synopsys renamed DWC_usb32 IP to DWC_usb4 as of IP version 1.30. No
functional change except checking for the IP_NAME here. The driver will
treat the new IP_NAME as if it's DWC_usb32. Additional features for USB4
will be introduced and checked separately.
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/e6f1827754c7a7ddc5eb7382add20bfe3a9b312f.1767390747.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the net_device is allocated in ncm_alloc_inst() and freed in
ncm_free_inst(). This ties the network interface's lifetime to the
configuration instance rather than the USB connection (bind/unbind).
This decoupling causes issues when the USB gadget is disconnected where
the underlying gadget device is removed. The net_device can outlive its
parent, leading to dangling sysfs links and NULL pointer dereferences
when accessing the freed gadget device.
Problem 1: NULL pointer dereference on disconnect
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
Call trace:
__pi_strlen+0x14/0x150
rtnl_fill_ifinfo+0x6b4/0x708
rtmsg_ifinfo_build_skb+0xd8/0x13c
rtmsg_ifinfo+0x50/0xa0
__dev_notify_flags+0x4c/0x1f0
dev_change_flags+0x54/0x70
do_setlink+0x390/0xebc
rtnl_newlink+0x7d0/0xac8
rtnetlink_rcv_msg+0x27c/0x410
netlink_rcv_skb+0x134/0x150
rtnetlink_rcv+0x18/0x28
netlink_unicast+0x254/0x3f0
netlink_sendmsg+0x2e0/0x3d4
Problem 2: Dangling sysfs symlinks
console:/ # ls -l /sys/class/net/ncm0
lrwxrwxrwx ... /sys/class/net/ncm0 ->
/sys/devices/platform/.../gadget.0/net/ncm0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/ncm0
ls: .../gadget.0/net/ncm0: No such file or directory
Move the net_device allocation to ncm_bind() and deallocation to
ncm_unbind(). This ensures the network interface exists only when the
gadget function is actually bound to a configuration.
To support pre-bind configuration (e.g., setting interface name or MAC
address via configfs), cache user-provided options in f_ncm_opts
using the gether_opts structure. Apply these cached settings to the
net_device upon creation in ncm_bind().
Preserve the use-after-free fix from commit 6334b8e455 ("usb: gadget:
f_ncm: Fix UAF ncm object at re-bind after usb ep transport error").
Check opts->net in ncm_set_alt() and ncm_disable() to ensure
gether_disconnect() runs only if a connection was established.
Fixes: 40d133d7f5 ("usb: gadget: f_ncm: convert to new function interface with backward compatibility")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20251230-ncm-refactor-v1-3-793e347bc7a7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The net_device in the u_ether framework currently requires explicit
calls to unregister and free the device.
Introduce gether_unregister_free_netdev() and the corresponding
auto-cleanup macro. This ensures that if a net_device is registered, it
is properly unregistered and the associated work queue is flushed before
the memory is freed.
This is a preparatory patch to simplify error handling paths in gadget
drivers by removing the need for explicit goto labels for net_device
cleanup.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20251230-ncm-refactor-v1-2-793e347bc7a7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the net_device is allocated when the function instance is
created (e.g., in ncm_alloc_inst()). While this allows userspace to
configure the device early, it decouples the net_device lifecycle from
the actual USB connection state (bind/unbind). The goal is to defer
net_device creation to the bind callback to properly align the lifecycle
with its parent gadget device.
However, deferring net_device allocation would prevent userspace from
configuring parameters (like interface name or MAC address) before the
net_device exists.
Introduce a new structure, struct gether_opts, associated with the
usb_function_instance, to cache settings independently of the
net_device. These settings include the interface name pattern, MAC
addresses (device and host), queue multiplier, and address assignment
type.
New helper functions are added:
- gether_setup_opts_default(): Initializes struct gether_opts with
defaults, including random MAC addresses.
- gether_apply_opts(): Applies the cached options from a struct
gether_opts to a valid net_device.
To expose these options to userspace, new configfs macros
(USB_ETHER_OPTS_ITEM and USB_ETHER_OPTS_ATTR_*) are defined in
u_ether_configfs.h. These attributes are part of the function
instance's configfs group.
This refactoring is a preparatory step. It allows the subsequent patch
to safely move the net_device allocation from the instance creation
phase to the bind phase without losing the ability to pre-configure
the interface via configfs.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20251230-ncm-refactor-v1-1-793e347bc7a7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
EXTCON_TCSS_CROS_EC isn't used anywhere else in the kernel tree,
so drop it from this Kconfig file.
(unless it should be EXTCON_USBC_CROS_EC ?)
Fixes: f1a2241778 ("usb: typec: ucsi: Implement ChromeOS UCSI driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20251228190604.2484082-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fhci-hcd driver does not really depend on any symbols controlled by
the OF_GPIO switch. It was probably added by accident so remove it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260106132706.45433-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to configure maxburst via configfs for bulk endpoints.
Update gadget documentation describing the new configfs property.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://patch.msgid.link/20251227145224.2091397-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The last user of the platform driver was a Blackfin BF533 powered board,
and it was removed in commit 4ba66a9760 ("arch: remove blackfin port")
along with the whole Blackfin architecture support 7 years ago.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251226000237.1440642-1-vz@mleia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold <johan@kernel.org> says:
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3e082978c3.
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
CPU: 0 UID: 0 PID: 813 Comm: kworker/0:3 Not tainted 6.19.0-rc2 #26 PREEMPT
Hardware name: LENOVO 21BYZ9SRUS/21BYZ9SRUS, BIOS N3HET87W (1.59 ) 12/05/2023
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call trace:
ucsi_sync_control_common+0xe4/0x1ec [typec_ucsi] (P)
ucsi_run_command+0xcc/0x194 [typec_ucsi]
ucsi_send_command_common+0x84/0x2a0 [typec_ucsi]
ucsi_get_connector_status+0x48/0x78 [typec_ucsi]
ucsi_handle_connector_change+0x5c/0x4f4 [typec_ucsi]
process_one_work+0x208/0x60c
worker_thread+0x244/0x388
The new code completely ignores concurrency so that the message length
can be updated while a transaction is ongoing. In the above case, the
length ends up being modified by another thread while processing an ack
so that the NULL cci pointer is dereferenced.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Fixes: 3e082978c3 ("usb: typec: ucsi: Update UCSI structure to have message in and message out fields")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-5-johan@kernel.org
This reverts commit db0028637c.
The new buffer management code that this feature relies on is broken so
revert for now.
As for the in buffer, nothing prevents the out message size and buffer
from being modified while the message is being processed due to lack of
serialisation.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-4-johan@kernel.org
This reverts commit 775fae520e.
The new buffer management code that this relies on is broken so revert
for now.
It also looks like the error handling needs some more thought as the
message out size is not reset on errors.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-3-johan@kernel.org
This reverts commit 1b474ee01f.
The new buffer management code that this feature relies on is broken so
revert for now.
The interface for writing data and support for UCSI_SET_PDOS looks like
it could use some more thought as well.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-2-johan@kernel.org
This reverts commit 14ad4c10d5.
The originally offending commit will be reverted instead of this fix up
at this point in time, so revert this fix.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: stable <stable@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Fixes: 14ad4c10d5 ("usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common")
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 5106dbab44.
There are reported issues in this file, so revert the commit for now so
that the original offending changes can be reverted and working systems
can be restored. This can come back at a later time if it is rebased
yet-again (sorry.)
Cc: stable <stable@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Fixes: 5106dbab44 ("usb: typec: ucsi: Get connector status after enable notifications")
Cc: Kenneth R. Crudup <kenny@panix.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hsin-Te Yuan <yuanhsinte@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Error labels should be named after what they do rather than after from
where they are jumped to.
Rename the probe error labels for consistency and to improve
readability.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Error labels should be named after what they do rather than after from
where they are jumped to.
Rename the probe error labels for consistency and to improve
readability.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use.
Fixes: c84117912b ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent change fixing a device reference leak introduced a clock
imbalance by reusing an error path so that the clock may be disabled
before having been enabled.
Note that the clock framework allows for passing in NULL clocks so there
is no risk for a NULL pointer dereference.
Also drop the bogus I2C client NULL check added by the offending commit
as the pointer has already been verified to be non-NULL.
Fixes: c84117912b ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Originally, the notification for connector change will be enabled after
the first read of the connector status. Therefore, if the event happens
during this window, it will be missing and make the status unsynced.
Get the connector status only after enabling the notification for
connector change to ensure the status is synced.
Fixes: c1b0bc2dab ("usb: typec: Add support for UCSI interface")
Cc: stable <stable@kernel.org>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://patch.msgid.link/20251218-ucsi-v7-1-aea83e83fb12@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We cannot determine which models require the NO_ATA_1X and
IGNORE_RESIDUE quirks aside from the EL-R12 optical drive device.
Fixes: 955a48a535 ("usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.")
Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
Link: https://patch.msgid.link/20251218012318.15978-1-chenchangcheng@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the DWC3 USB controller found on Google Tensor G5
(codename: laguna). The controller features dual-role functionality
and hibernation.
The primary focus is implementing hibernation support in host mode,
enabling the controller to enter a low-power state (D3). This is
particularly relevant during system power state transition and
runtime power management for power efficiency.
Highlights:
- Align suspend callback with dwc3_suspend_common() for deciding
between a full teardown and hibernation in host mode.
- Integration with `psw` (power switchable) and `top` power domains,
managing their states and device links to support hibernation.
- A notifier callback dwc3_google_usb_psw_pd_notifier() for
`psw` power domain events to manage controller state
transitions to/from D3.
- Coordination of the `non_sticky` reset during power state
transitions, asserting it on D3 entry and deasserting on D0 entry
in hibernation scenario.
- Handling of high-speed and super-speed PME interrupts
that are generated by remote wakeup during hibernation.
Co-developed-by: Joy Chakraborty <joychakr@google.com>
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Co-developed-by: Naveen Kumar <mnkumar@google.com>
Signed-off-by: Naveen Kumar <mnkumar@google.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Roy Luo <royluo@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251218-controller-v10-2-4047c9077274@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
65061 20968 256 86285 1510d drivers/usb/gadget/configfs.o
After:
=====
text data bss dec hex filename
66181 19848 256 86285 1510d drivers/usb/gadget/configfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/49cec1cb84425f854de80b6d69b53a5a3cda8189.1766164523.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When clk_bulk_prepare_enable() fails, the error path jumps to
err_resetc_assert, skipping clk_bulk_put_all() and leaking the
clock references acquired by clk_bulk_get_all().
Add err_clk_put_all label to properly release clock resources
in all error paths.
Found via static analysis and code review.
Fixes: c0c61471ef ("usb: dwc3: of-simple: Convert to bulk clk API")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251211064937.2360510-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing null check for cci parameter before dereferencing it in
ucsi_sync_control_common(). The function can be called with cci=NULL
from ucsi_acknowledge(), which leads to a null pointer dereference
when accessing *cci in the condition check.
The crash occurs because the code checks if cci is not null before
calling ucsi->ops->read_cci(ucsi, cci), but then immediately
dereferences cci without a null check in the following condition:
(*cci & UCSI_CCI_COMMAND_COMPLETE).
KASAN trace:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:ucsi_sync_control_common+0x2ae/0x4e0 [typec_ucsi]
Cc: stable <stable@kernel.org>
Fixes: 667ecac558 ("usb: typec: ucsi: return CCI and message from sync_control callback")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251216122210.5457-1-superm1@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lpc32xx_udc_probe() acquires an i2c_client reference through
isp1301_get_client() but fails to release it in both error handling
paths and the normal removal path. This could result in a reference
count leak for the I2C device, preventing proper cleanup and potentially
leading to resource exhaustion. Add put_device() to release the
reference in the probe failure path and in the remove function.
Calling path: isp1301_get_client() -> of_find_i2c_device_by_node() ->
i2c_find_device_by_fwnode(). As comments of i2c_find_device_by_fwnode()
says, 'The user must call put_device(&client->dev) once done with the
i2c client.'
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 24a28e4283 ("USB: gadget driver for LPC32xx")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251215020931.15324-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The delayed work item otg_event is initialized in fsl_otg_conf() and
scheduled under two conditions:
1. When a host controller binds to the OTG controller.
2. When the USB ID pin state changes (cable insertion/removal).
A race condition occurs when the device is removed via fsl_otg_remove():
the fsl_otg instance may be freed while the delayed work is still pending
or executing. This leads to use-after-free when the work function
fsl_otg_event() accesses the already freed memory.
The problematic scenario:
(detach thread) | (delayed work)
fsl_otg_remove() |
kfree(fsl_otg_dev) //FREE| fsl_otg_event()
| og = container_of(...) //USE
| og-> //USE
Fix this by calling disable_delayed_work_sync() in fsl_otg_remove()
before deallocating the fsl_otg structure. This ensures the delayed work
is properly canceled and completes execution prior to memory deallocation.
This bug was identified through static analysis.
Fixes: 0807c500a1 ("USB: add Freescale USB OTG Transceiver driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/20251205034831.12846-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Selecting DRM_AUX_HPD_BRIDGE is not possible from a built-in driver when
CONFIG_DRM=m:
WARNING: unmet direct dependencies detected for DRM_AUX_HPD_BRIDGE
Depends on [m]: HAS_IOMEM [=y] && DRM [=m] && DRM_BRIDGE [=y] && OF [=y]
Selected by [y]:
- UCSI_HUAWEI_GAOKUN [=y] && USB_SUPPORT [=y] && TYPEC [=y] && TYPEC_UCSI [=y] && EC_HUAWEI_GAOKUN [=y] && DRM_BRIDGE [=y] && OF [=y]
Add the same dependency we have in similar drivers to work around this.
Fixes: 00327d7f2c ("usb: typec: ucsi: add Huawei Matebook E Go ucsi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251204101111.1035975-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some platforms, switching USB roles from host to device can trigger
controller faults due to premature PHY power-down. This occurs when the
PHY is disabled too early during teardown, causing synchronization
issues between the PHY and controller.
Keep susphy enabled during dwc3_host_exit() and dwc3_gadget_exit()
ensures the PHY remains in a low-power state capable of handling
required commands during role switch.
Cc: stable <stable@kernel.org>
Fixes: 6d73572206 ("usb: dwc3: core: Prevent phy suspend during init")
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Udipto Goswami <udipto.goswami@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251126054221.120638-1-udipto.goswami@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ucsi_psy_get_voltage_max and ucsi_psy_get_current_max are calculated
using whichever pdo is in the last position of the src_pdos array, presuming
it to be a fixed pdo, so the pdo_fixed_voltage or pdo_max_current
helpers are used on that last pdo.
However, non-Fixed PDOs such as Battery PDOs, Augmented PDOs (used for AVS and
for PPS) may exist, and are always at the end of the array if they do.
In the event one of these more advanced chargers are attached the helpers for
fixed return mangled values.
Here's an example case of a Google Pixel Flex Dual Port 67W USB-C Fast Charger
with PPS support:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=13400000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=5790000
POWER_SUPPLY_CURRENT_NOW=3250000
Voltage Max is reading as 13.4V, but that's an incorrect decode of the PPS
APDO in the last position. Same goes for CURRENT_MAX. 5.79A is incorrect.
Instead, enumerate through the src_pdos and filter just for Fixed PDOs for
now, and find the one with the highest voltage and current respectively.
After, from the same charger:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=20000000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=4000000
POWER_SUPPLY_CURRENT_NOW=3250000
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208174918.289394-3-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
current_now would always return 0 in for non-PD power sources, and the
negotiated current based on the Request RDO in PD mode.
For USB Type-C current or legacy Default USB cases current_now will present
the max value of those modes, as that is the equivalent of the Request RDO
in PD.
Also, current_now will now return 0 when the port is disconnected to match
the same behavior of current_max.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208174918.289394-2-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using f_midi from configfs the USB MIDI interface string is hardcoded
to 'MIDI function'.
This USB string descriptor is used by some third-party OS or software to
display the name of the MIDI device
Since we add an additional string option a new macro block was created to
factorize declarations
Signed-off-by: Victor Krawiec <victor.krawiec@arturia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251209164006.143219-1-victor.krawiec@arturia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DRM may want to register a notifier on the typec bus to know when
a typec altmode device is added, and distinguish between different
types of typec altmode device.
Export these things.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208015500.94-3-kernel@airkyi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port and plug altmodes can't be bound to the altmode
drivers because the altmode drivers are meant for partner
communication using the VDM (vendor defined messages), but
they can still be part of the bus. The bus will make sure
that the normal bus notifications are available also with
the port altmodes.
The previously used common device type for all alternate
modes is replaced with separate dedicated device types for
port, plug, and partner alternate modes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Link: https://patch.msgid.link/20251208015500.94-2-kernel@airkyi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the AST2700 SOC in the vhub gadget driver. AST2700
uses a 64-bit DMA addressing capability, so select 64-bit DMA mask
for compatible. AST2700 vhub also requires an reset line, so hook
up the optional reset control and assert/deassert it during probe
and remove.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://patch.msgid.link/20251128-upstream_vhub-v2-2-1fa66a5833c2@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of USB and Thunderbolt driver updates for 6.19-rc1.
Nothing major here, just lots of tiny updates for most of the common USB
drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTLNQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn29wCcD23xCSWuRIKHfSWlefCwptHKT0AAoM0NJdeO
C4/4pui5ifTu1g5Vud1r
=Sm/3
-----END PGP SIGNATURE-----
Merge tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
dentries of created objects in dcache (and undo it when removing those).
Reference is grabbed and not released, but it's not actually _stored_
anywhere. That works, but it's hard to follow and verify; among other
things, we have no way to tell _which_ of the increments is intended
to be an unpaired one. Worse, on removal we need to decide whether
the reference had already been dropped, which can be non-trivial if
that removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag (DCACHE_PERSISTENT)
marking those "leaked" dentries. Having it set claims responsibility
for +1 in refcount.
The end result this series is aiming for:
* get these unbalanced dget() and dput() replaced with new primitives that
would, in addition to adjusting refcount, set and clear persistency flag.
* instead of having kill_litter_super() mess with removing the remaining
"leaked" references (e.g. for all tmpfs files that hadn't been removed
prior to umount), have the regular shrink_dcache_for_umount() strip
DCACHE_PERSISTENT of all dentries, dropping the corresponding
reference if it had been set. After that kill_litter_super() becomes
an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many places
in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary pieces
have already gone into mainline. This chunk is finally getting to the
meat of that stuff - infrastructure and most of the conversions to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaTEq1wAKCRBZ7Krx/gZQ
643uAQC1rRslhw5l7OjxEpIYbGG4M+QaadN4Nf5Sr2SuTRaPJQD/W4oj/u4C2eCw
Dd3q071tqyvm/PXNgN2EEnIaxlFUlwc=
=rKq+
-----END PGP SIGNATURE-----
Merge tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull persistent dentry infrastructure and conversion from Al Viro:
"Some filesystems use a kinda-sorta controlled dentry refcount leak to
pin dentries of created objects in dcache (and undo it when removing
those). A reference is grabbed and not released, but it's not actually
_stored_ anywhere.
That works, but it's hard to follow and verify; among other things, we
have no way to tell _which_ of the increments is intended to be an
unpaired one. Worse, on removal we need to decide whether the
reference had already been dropped, which can be non-trivial if that
removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag
(DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set
claims responsibility for +1 in refcount.
The end result this series is aiming for:
- get these unbalanced dget() and dput() replaced with new primitives
that would, in addition to adjusting refcount, set and clear
persistency flag.
- instead of having kill_litter_super() mess with removing the
remaining "leaked" references (e.g. for all tmpfs files that hadn't
been removed prior to umount), have the regular
shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries,
dropping the corresponding reference if it had been set. After that
kill_litter_super() becomes an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many
places in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary
pieces have already gone into mainline. This chunk is finally getting
to the meat of that stuff - infrastructure and most of the conversions
to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here"
* tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
d_make_discardable(): warn if given a non-persistent dentry
kill securityfs_recursive_remove()
convert securityfs
get rid of kill_litter_super()
convert rust_binderfs
convert nfsctl
convert rpc_pipefs
convert hypfs
hypfs: swich hypfs_create_u64() to returning int
hypfs: switch hypfs_create_str() to returning int
hypfs: don't pin dentries twice
convert gadgetfs
gadgetfs: switch to simple_remove_by_name()
convert functionfs
functionfs: switch to simple_remove_by_name()
functionfs: fix the open/removal races
functionfs: need to cancel ->reset_work in ->kill_sb()
functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}()
functionfs: don't abuse ffs_data_closed() on fs shutdown
convert selinuxfs
...
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95
-----BEGIN PGP SIGNATURE-----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=Fkue
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95"
* tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits)
pmdomain: Extend the genpd governor for CPUs to account for IPIs
smp: Introduce a helper function to check for pending IPIs
pmdomain: mediatek: convert from clk round_rate() to determine_rate()
amba: bus: Drop dev_pm_domain_detach() call
pmdomain: bcm: bcm2835-power: Prepare to support BCM2712
pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig
pmdomain: mediatek: Add support for MFlexGraphics
pmdomain: mediatek: Fix build-errors
cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu
pmdomain: rockchip: Add support for RV1126B
pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains
pmdomain: mediatek: Add support for MT8196 SCPSYS power domains
pmdomain: mediatek: Add support for secure HWCCF infra power on
pmdomain: mediatek: Add support for Hardware Voter power domains
pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali
usb: dwc3: imx8mp: Set out of band wakeup for i.MX95
usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95
usb: chipidea: core: detach power domain for ci_hdrc platform device
pmdomain: core: Allow power-off for out-of-band wakeup-capable devices
PM: wakeup: Add out-of-band system wakeup support for devices
...
- Introduce and document a QoS limit on CPU exit latency during wakeup
from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
- Add support for sending netlink notifications to user space on energy
model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the cpufreq
core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up multiple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat Lake
processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate cpufreq
driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking in
it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi, Hal
Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in
generic PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power management
watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source from
the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael Wysocki)
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
- Move governor.h from devfreq under include/linux/ and rename to
devfreq-governor.h to allow devfreq governor definitions in out
of drivers/devfreq/ (Dmitry Baryshkov)
- Use min() to improve readability in tegra30-devfreq.c (Thorsten
Blum)
- Fix potential use-after-free issue of OPP handling in
hisi_uncore_freq.c (Pengjie Zhang)
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name in
governor_simpleondemand.c in devfreq (Riwen Lu)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmkp0BYSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1Pc8H/2G5d0aD/ym1a8MDTpKqn7t3/rVMHa76
YGfxXMBr1oY++r5GTJTKBxZBHmF89VH71kdyvsMidTAtHjR+iZAS1ajd2Q5VYjOF
QNMld1qgPEzAZU8WSetDrBqMr89zls05Uubo4aCoNy6rFmgRaLHh3AmIKSS9aJuo
C1eH8dRONME5I/rafkOUpFs1+/Agq1vePwPZmwVnZX9A3qI+UOhMRdU9A37kYkx9
YwfQvR2fKTIPjZ6B9f/wGXPOvdrT37d4+dWT3EABOHMkxlpAPDMvmVzZsUaXSQMr
0d9NGEjPGo33qciKJJpHqNOdDOhi90606WBBf7aaMF+GMhDX3PznOK4=
=rzXO
-----END PGP SIGNATURE-----
Merge tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are quite a few interesting things here, including new hardware
support, new features, some bug fixes and documentation updates. In
addition, there are a usual bunch of minor fixes and cleanups all
over.
In the new hardware support category, there are intel_pstate and
intel_rapl driver updates to support new processors, Panther Lake,
Wildcat Lake, Noval Lake, and Diamond Rapids in the OOB mode, OPP and
bandwidth allocation support in the tegra186 cpufreq driver, and
JH7110S SOC support in dt-platdev cpufreq.
The new features are the PM QoS CPU latency limit for suspend-to-idle,
the netlink support for the energy model management, support for
terminating system suspend via a wakeup event during the sync of file
systems, configurable number of hibernation compression threads, the
runtime PM auto-cleanup macros, and the "poweroff" PM event that is
expected to be used during system shutdown.
Bugs are mostly fixed in cpuidle governors, but there are also fixes
elsewhere, like in the amd-pstate cpufreq driver.
Documentation updates include, but are not limited to, a new doc on
debugging shutdown hangs, cross-referencing fixes and cleanups in the
intel_pstate documentation, and updates of comments in the core
hibernation code.
Specifics:
- Introduce and document a QoS limit on CPU exit latency during
wakeup from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
- Add support for sending netlink notifications to user space on
energy model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the
cpufreq core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up multiple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat
Lake processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate
cpufreq driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking
in it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi,
Hal Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in generic
PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power
management watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source
from the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael
Wysocki)
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
- Move governor.h from devfreq under include/linux/ and rename to
devfreq-governor.h to allow devfreq governor definitions in out of
drivers/devfreq/ (Dmitry Baryshkov)
- Use min() to improve readability in tegra30-devfreq.c (Thorsten
Blum)
- Fix potential use-after-free issue of OPP handling in
hisi_uncore_freq.c (Pengjie Zhang)
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name in
governor_simpleondemand.c in devfreq (Riwen Lu)"
* tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (96 commits)
PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name
cpuidle: Warn instead of bailing out if target residency check fails
cpuidle: Update header inclusion
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
cpuidle: governors: teo: Add missing space to the description
PM: hibernate: Extra cleanup of comments in swap handling code
PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate
PM / devfreq: hisi: Fix potential UAF in OPP handling
PM / devfreq: Move governor.h to a public header location
powercap: intel_rapl: Enable MSR-based RAPL PMU support
powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
cpufreq: ACPI: Replace udelay() with usleep_range()
...
The driver previously skipped handling ClearFeature(ENDPOINT_HALT)
when the endpoint was already not halted. This prevented the
controller from resetting the data sequence number and reinitializing
the endpoint state.
According to USB 3.2 specification Rev. 1.1, section 9.4.5,
ClearFeature(ENDPOINT_HALT) must always reset the data sequence and
set the stream state machine to Disabled, regardless of whether the
endpoint was halted.
Remove the early return so that ClearFeature(ENDPOINT_HALT) always
resets the endpoint sequence state as required by the specification.
Fixes: 49db427232 ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Cc: stable <stable@kernel.org>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://patch.msgid.link/20251127033540.2287517-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are the USB serial updates for 6.19-rc1:
- fix belkin_sa and kobil_sct TIOCMBIS and TIOCMBIC ioctls
- match on interface number for dual-port ftdi devices with reserved
jtag port
- do not log reserved ftdi jtag ports on probe
- apply ftdi_sio NDI quirk remapping 19200 bps consistently
- drop ftdi_sio NDI quirk module parameter
- clean up ftdi_sio quirk implementations
- add more modem device ids
Included are also various clean ups.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaSgIYwAKCRALxc3C7H1l
CJNkAP4nUci9snQxOwALfxIb5d4qBgeyHtqA2JO1BNENztExtgEA1vrCIWZJ7uFS
H60jvRQXtNaNJmn5Zgu0gQMbPk1SWwM=
=VLLU
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.19-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 6.19-rc1
Here are the USB serial updates for 6.19-rc1:
- fix belkin_sa and kobil_sct TIOCMBIS and TIOCMBIC ioctls
- match on interface number for dual-port ftdi devices with reserved
jtag port
- do not log reserved ftdi jtag ports on probe
- apply ftdi_sio NDI quirk remapping 19200 bps consistently
- drop ftdi_sio NDI quirk module parameter
- clean up ftdi_sio quirk implementations
- add more modem device ids
Included are also various clean ups.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.19-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
USB: serial: option: add Foxconn T99W760
USB: serial: ftdi_sio: drop NDI quirk module parameter
USB: serial: ftdi_sio: clean up NDI speed hack
USB: serial: ftdi_sio: enable NDI speed hack consistently
USB: serial: ftdi_sio: rename quirk symbols
USB: serial: ftdi_sio: clean up quirk comments
USB: serial: ftdi_sio: rewrite 8u2232c quirk
USB: serial: ftdi_sio: silence jtag probe
USB: serial: ftdi_sio: match on interface number for jtag
USB: serial: kobil_sct: drop unnecessary initialisations
USB: serial: kobil_sct: clean up set_termios()
USB: serial: kobil_sct: add control request helpers
USB: serial: kobil_sct: clean up device type checks
USB: serial: kobil_sct: clean up tiocmset()
USB: serial: belkin_sa: clean up tiocmset()
USB: serial: kobil_sct: fix TIOCMBIS and TIOCMBIC
USB: serial: belkin_sa: fix TIOCMBIS and TIOCMBIC
Move Telit 0x10c7 composition right after 0x10c6 composition and
before 0x10c8 composition.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
The delayed work uec->work is scheduled in gaokun_ucsi_probe()
but never properly canceled in gaokun_ucsi_remove(). This creates
use-after-free scenarios where the ucsi and gaokun_ucsi structure
are freed after ucsi_destroy() completes execution, while the
gaokun_ucsi_register_worker() might be either currently executing
or still pending in the work queue. The already-freed gaokun_ucsi
or ucsi structure may then be accessed.
Furthermore, the race window is 3 seconds, which is sufficiently
long to make this bug easily reproducible. The following is the
trace captured by KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in __run_timers+0x5ec/0x630
Write of size 8 at addr ffff00000ec28cc8 by task swapper/0/0
...
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x78/0x90
print_report+0x114/0x580
kasan_report+0xa4/0xf0
__asan_report_store8_noabort+0x20/0x2c
__run_timers+0x5ec/0x630
run_timer_softirq+0xe8/0x1cc
handle_softirqs+0x294/0x720
__do_softirq+0x14/0x20
____do_softirq+0x10/0x1c
call_on_irq_stack+0x30/0x48
do_softirq_own_stack+0x1c/0x28
__irq_exit_rcu+0x27c/0x364
irq_exit_rcu+0x10/0x1c
el1_interrupt+0x40/0x60
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
arch_local_irq_enable+0x4/0x8 (P)
do_idle+0x334/0x458
cpu_startup_entry+0x60/0x70
rest_init+0x158/0x174
start_kernel+0x2f8/0x394
__primary_switched+0x8c/0x94
Allocated by task 72 on cpu 0 at 27.510341s:
kasan_save_stack+0x2c/0x54
kasan_save_track+0x24/0x5c
kasan_save_alloc_info+0x40/0x54
__kasan_kmalloc+0xa0/0xb8
__kmalloc_node_track_caller_noprof+0x1c0/0x588
devm_kmalloc+0x7c/0x1c8
gaokun_ucsi_probe+0xa0/0x840 auxiliary_bus_probe+0x94/0xf8
really_probe+0x17c/0x5b8
__driver_probe_device+0x158/0x2c4
driver_probe_device+0x10c/0x264
__device_attach_driver+0x168/0x2d0
bus_for_each_drv+0x100/0x188
__device_attach+0x174/0x368
device_initial_probe+0x14/0x20
bus_probe_device+0x120/0x150
device_add+0xb3c/0x10fc
__auxiliary_device_add+0x88/0x130
...
Freed by task 73 on cpu 1 at 28.910627s:
kasan_save_stack+0x2c/0x54
kasan_save_track+0x24/0x5c
__kasan_save_free_info+0x4c/0x74
__kasan_slab_free+0x60/0x8c
kfree+0xd4/0x410
devres_release_all+0x140/0x1f0
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x344/0x460
device_release_driver+0x18/0x24
bus_remove_device+0x198/0x274
device_del+0x310/0xa84
...
The buggy address belongs to the object at ffff00000ec28c00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 200 bytes inside of
freed 512-byte region
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ec28
head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff)
page_type: f5(slab)
raw: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 03fffe0000000002 fffffdffc03b0a01 00000000ffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff00000ec28b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff00000ec28c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff00000ec28c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff00000ec28d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff00000ec28d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Add disable_delayed_work_sync() in gaokun_ucsi_remove() to ensure
that uec->work is properly canceled and prevented from executing
after the ucsi and gaokun_ucsi structure have been deallocated.
Fixes: 00327d7f2c ("usb: typec: ucsi: add Huawei Matebook E Go ucsi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/cc31e12ef9ffbf86676585b02233165fd33f0d8e.1764065838.git.duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gaokun_ucsi_probe() uses ucsi_create() to allocate a UCSI instance.
The ucsi_create() validates whether ops->poll_cci is defined, and if not,
it directly returns -EINVAL. However, the gaokun_ucsi_ops structure does
not define the poll_cci, causing ucsi_create() always fail with -EINVAL.
This issue can be observed in the kernel log with the following error:
ucsi_huawei_gaokun.ucsi huawei_gaokun_ec.ucsi.0: probe with driver
ucsi_huawei_gaokun.ucsi failed with error -22
Fix the issue by adding the missing poll_cci callback to gaokun_ucsi_ops.
Fixes: 00327d7f2c ("usb: typec: ucsi: add Huawei Matebook E Go ucsi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://patch.msgid.link/4d077d6439d728be68646bb8c8678436a3a0885e.1764065838.git.duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove redundant comment which was put in to address LLUCTL register
modifications for all applicable ports of multiport controller. Although
the support was added, the todo comment wasn't removed then.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251116123033.131004-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As part of the registration of a new 'struct usb_phy' with the USB PHY core
via either usb_add_phy(struct usb_phy *x, ...) or usb_add_phy_dev(struct
usb_phy *x) these functions call list_add_tail(&x->head, phy_list) in
order for the new instance x to be stored in phy_list, a static list
kept internally by the core.
After 7d21114dc6 ("usb: phy: Introduce one extcon device into usb phy")
when executing either of the registration functions above it is possible
that usb_add_extcon() fails, leading to either function returning before
the call to list_add_tail(), leaving x->head uninitialized.
Then, when a driver tries to undo the failed registration by calling
usb_remove_phy(struct usb_phy *x) there will be an unconditional call to
list_del(&x->head) acting on an uninitialized variable, and thus a
possible NULL pointer dereference.
Fix this by initializing x->head before usb_add_extcon() has a
chance to fail. Note that this was not needed before 7d21114dc6 since
list_add_phy() was executed unconditionally and it guaranteed that x->head
was initialized.
Fixes: 7d21114dc6 ("usb: phy: Introduce one extcon device into usb phy")
Cc: stable <stable@kernel.org>
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://patch.msgid.link/20251121-diogo-smaug_typec-v2-1-5c37c1169d57@tecnico.ulisboa.pt
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_pm_runtime_enable() can fail due to memory allocation.
The current code ignores its return value, potentially causing
pm_runtime_resume_and_get() to operate on uninitialized runtime
PM state.
Check the return value of devm_pm_runtime_enable() and return on failure.
Fixes: 3e6e14ffde ("usb: gadget: udc: add Renesas RZ/N1 USBF controller support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251124022215.1619-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A report from Oleg Smirnov indicates that the unusual_devs quirks
entry for the Novatek camera does not need to override the subclass
and protocol parameters:
[3266355.209532] usb 1-3: new high-speed USB device number 10 using xhci_hcd
[3266355.333031] usb 1-3: New USB device found, idVendor=0603, idProduct=8611, bcdDevice= 1.00
[3266355.333040] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[3266355.333043] usb 1-3: Product: YICARCAM
[3266355.333045] usb 1-3: Manufacturer: XIAO-YI
[3266355.333047] usb 1-3: SerialNumber: 966110000000100
[3266355.338621] usb-storage 1-3:1.0: USB Mass Storage device detected
[3266355.338817] usb-storage 1-3:1.0: Quirks match for vid 0603 pid 8611: 4000
[3266355.338821] usb-storage 1-3:1.0: This device (0603,8611,0100 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h (kernel 6.16.10-arch1-1)
Please send a copy of this message to
<linux-usb@vger.kernel.org> and <usb-storage@lists.one-eyed-alien.net>
The overrides are harmless but they do provoke the driver into logging
this annoying message. Update the entry to remove the unneeded entries.
Reported-by: stealth <oleg.smirnov.1988@gmail.com>
Closes: https://lore.kernel.org/CAKxjRRxhC0s19iEWoN=pEMqXJ_z8w_moC0GCXSqSKCcOddnWjQ@mail.gmail.com/
Fixes: 6ca8af3c8f ("USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera")
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/b440f177-f0b8-4d5a-8f7b-10855d4424ee@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The optical drive of EL-R12 has the same vid and pid as INIC-3069,
as follows:
T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0
D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=13fd ProdID=3940 Rev= 3.10
S: Manufacturer=HL-DT-ST
S: Product= DVD+-RW GT80N
S: SerialNumber=423349524E4E38303338323439202020
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=144mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=02 Prot=50 Driver=usb-storage
E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
This will result in the optical drive device also adding
the quirks of US_FL_NO_ATA_1X. When performing an erase operation,
it will fail, and the reason for the failure is as follows:
[ 388.967742] sr 5:0:0:0: [sr0] tag#0 Send: scmd 0x00000000d20c33a7
[ 388.967742] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
[ 388.967773] sr 5:0:0:0: [sr0] tag#0 Done: SUCCESS Result: hostbyte=DID_TARGET_FAILURE driverbyte=DRIVER_OK cmd_age=0s
[ 388.967773] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
[ 388.967803] sr 5:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
[ 388.967803] sr 5:0:0:0: [sr0] tag#0 Add. Sense: Invalid field in cdb
[ 388.967803] sr 5:0:0:0: [sr0] tag#0 scsi host busy 1 failed 0
[ 388.967803] sr 5:0:0:0: Notifying upper driver of completion (result 8100002)
[ 388.967834] sr 5:0:0:0: [sr0] tag#0 0 sectors total, 0 bytes done.
For the EL-R12 standard optical drive, all operational commands
and usage scenarios were tested without adding the IGNORE_RESIDUE quirks,
and no issues were encountered. It can be reasonably concluded
that removing the IGNORE_RESIDUE quirks has no impact.
Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
Link: https://patch.msgid.link/20251121064020.29332-1-chenchangcheng@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a ID pin present on HD3SS3220 controller that can be routed
to SoC. As per the datasheet:
"Upon detecting a UFP device, HD3SS3220 will keep ID pin high if VBUS is
not at VSafe0V. Once VBUS is at VSafe0V, the HD3SS3220 will assert ID pin
low. This is done to enforce Type-C requirement that VBUS must be at
VSafe0V before re-enabling VBUS"
Add support to read the ID pin state and enable VBUS accordingly.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251111072025.2199142-3-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251107153737.301413-3-marco.crivellari@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251107153737.301413-2-marco.crivellari@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
min_t(unsigned int, a, b) casts an 'unsigned long' to 'unsigned int'.
Use min(a, b) instead as it promotes any 'unsigned int' to 'unsigned long'
and so cannot discard significant bits.
In this case the 'unsigned long' value is small enough that the result
is ok.
Detected by an extra check added to min_t().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20251119224140.8616-29-david.laight.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The previous commit removed the PAGE_SIZE limit on transfer length of
raw_io buffer in order to avoid any problems with emulating USB devices
whose full configuration descriptor exceeds PAGE_SIZE in length. However
this also removes the upperbound on user supplied length, allowing very
large values to be passed to the allocator.
syzbot on fuzzing the transfer length with very large value (1.81GB)
results in kmalloc() to fall back to the page allocator, which triggers
a kernel warning as the page allocator cannot handle allocations more
than MAX_PAGE_ORDER/KMALLOC_MAX_SIZE.
Since there is no limit imposed on the size of buffer for both control
and non control transfers, cap the raw_io transfer length to
KMALLOC_MAX_SIZE and return -EINVAL for larger transfer length to
prevent any warnings from the page allocator.
Fixes: 37b9dd0d11 ("usb: raw-gadget: do not limit transfer length")
Tested-by: syzbot+d8fd35fa6177afa8c92b@syzkaller.appspotmail.com
Reported-by: syzbot+d8fd35fa6177afa8c92b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68fc07a0.a70a0220.3bf6c6.01ab.GAE@google.com/
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://patch.msgid.link/20251028165659.50962-1-krishnagopi487@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a UAS device is unplugged during data transfer, there is
a probability of a system panic occurring. The root cause is
an access to an invalid memory address during URB callback handling.
Specifically, this happens when the dma_direct_unmap_sg() function
is called within the usb_hcd_unmap_urb_for_dma() interface, but the
sg->dma_address field is 0 and the sg data structure has already been
freed.
The SCSI driver sends transfer commands by invoking uas_queuecommand_lck()
in uas.c, using the uas_submit_urbs() function to submit requests to USB.
Within the uas_submit_urbs() implementation, three URBs (sense_urb,
data_urb, and cmd_urb) are sequentially submitted. Device removal may
occur at any point during uas_submit_urbs execution, which may result
in URB submission failure. However, some URBs might have been successfully
submitted before the failure, and uas_submit_urbs will return the -ENODEV
error code in this case. The current error handling directly calls
scsi_done(). In the SCSI driver, this eventually triggers scsi_complete()
to invoke scsi_end_request() for releasing the sgtable. The successfully
submitted URBs, when being unlinked to giveback, call
usb_hcd_unmap_urb_for_dma() in hcd.c, leading to exceptions during sg
unmapping operations since the sg data structure has already been freed.
This patch modifies the error condition check in the uas_submit_urbs()
function. When a UAS device is removed but one or more URBs have already
been successfully submitted to USB, it avoids immediately invoking
scsi_done() and save the cmnd to devinfo->cmnd array. If the successfully
submitted URBs is completed before devinfo->resetting being set, then
the scsi_done() function will be called within uas_try_complete() after
all pending URB operations are finalized. Otherwise, the scsi_done()
function will be called within uas_zap_pending(), which is executed after
usb_kill_anchored_urbs().
The error handling only takes effect when uas_queuecommand_lck() calls
uas_submit_urbs() and returns the error value -ENODEV . In this case,
the device is disconnected, and the flow proceeds to uas_disconnect(),
where uas_zap_pending() is invoked to call uas_try_complete().
Fixes: eb2a86ae8c ("USB: UAS: fix disconnect by unplugging a hub")
Cc: stable <stable@kernel.org>
Signed-off-by: Yu Chen <chenyu45@xiaomi.com>
Signed-off-by: Owen Gu <guhuinan@xiaomi.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20251120123336.3328-1-guhuinan@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch addresses a race condition caused by unsynchronized
execution of multiple call paths invoking `dwc3_remove_requests()`,
leading to premature freeing of USB requests and subsequent crashes.
Three distinct execution paths interact with `dwc3_remove_requests()`:
Path 1:
Triggered via `dwc3_gadget_reset_interrupt()` during USB reset
handling. The call stack includes:
- `dwc3_ep0_reset_state()`
- `dwc3_ep0_stall_and_restart()`
- `dwc3_ep0_out_start()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 2:
Also initiated from `dwc3_gadget_reset_interrupt()`, but through
`dwc3_stop_active_transfers()`. The call stack includes:
- `dwc3_stop_active_transfers()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 3:
Occurs independently during `adb root` execution, which triggers
USB function unbind and bind operations. The sequence includes:
- `gserial_disconnect()`
- `usb_ep_disable()`
- `dwc3_gadget_ep_disable()`
- `dwc3_remove_requests()` with `-ESHUTDOWN` status
Path 3 operates asynchronously and lacks synchronization with Paths
1 and 2. When Path 3 completes, it disables endpoints and frees 'out'
requests. If Paths 1 or 2 are still processing these requests,
accessing freed memory leads to a crash due to use-after-free conditions.
To fix this added check for request completion and skip processing
if already completed and added the request status for ep0 while queue.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Manish Nagar <manish.nagar@oss.qualcomm.com>
Link: https://patch.msgid.link/20251120074435.1983091-1-manish.nagar@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When DbC is disconnected then xhci_dbc_tty_unregister_device()
is called. However if there is any user space process blocked
on write to DbC terminal device then it will never be signalled
and thus stay blocked indifinitely.
This fix adds a tty_vhangup() call in xhci_dbc_tty_unregister_device().
The tty_vhangup() wakes up any blocked writers and causes subsequent
write attempts to DbC terminal device to fail.
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Link: https://patch.msgid.link/20251119212910.1245694-1-ukaszb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Discovered by Atuin - Automated Vulnerability Discovery Engine.
new_pba comes from the status packet returned after each write.
A bogus device could report values beyond the block count derived
from info->capacity, letting the driver walk off the end of
pba_to_lba[] and corrupt heap memory.
Reject PBAs that exceed the computed block count and fail the
transfer so we avoid touching out-of-range mapping entries.
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/B2DC73A3EE1E3A1D+202511161322001664687@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We no longer support any board files for DaVinci in mainline and so
struct da8xx_ohci_root_hub is no longer used. Remove it together with
all the code it's used for.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20251114-davinci-usb-v1-1-737380353a74@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the open-coded dma_resv_lock()/dma_resv_unlock() around
dma_buf_unmap_attachment() in ffs_dmabuf_release() with the
dma_buf_unmap_attachment_unlocked() helper.
This aligns FunctionFS DMABUF unmap handling with the standard
DMA-BUF API, avoids duplicating locking logic and eases future
maintenance. No functional change.
Reviewed-by: fanggeng <fanggeng@lixiang.com>
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Link: https://patch.msgid.link/20251114084246.2064845-1-buaajxlj@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The EIC7700 instantiates two USB 3.0 DWC3 IPs, each of which is backward
compatible with USB interfaces. It supports Super-speed (5Gb/s), DRD mode,
and compatible with xHCI 1.1, etc. Each of instances supports 16 endpoints
in device's mode and max 64 devices in host's mode.
This module needs to interact with the NOC via the AXI master bus, thus
requiring some HSP configuration operations to achieve this. Ops include
bus filter, pm signal or status to usb bus and so on.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Senchuan Zhang <zhangsenchuan@eswincomputing.com>
Signed-off-by: Hang Cao <caohang@eswincomputing.com>
Link: https://patch.msgid.link/20251112055346.1655-1-caohang@eswincomputing.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add debugfs entry for writing message_out data structure to handle
UCSI 2.1 and 3.0 commands through debugfs interface.
Users writing to the message_out debugfs file should ensure the input
data adheres to the following format:
1. Input must be a non-empty valid hexadecimal string.
2. Input length of hexadecimal string must not exceed 256 bytes of
length to be in alignment with the message out data structure size
as per the UCSI specification v2.1.
3. If the input string length is odd, then user needs to prepend a
'0' to the first character for proper hex conversion.
Below are examples of valid hex strings. Note that these values are
just examples. The exact values depend on specific command use case.
#echo 1A2B3C4D > message_out
#echo 01234567 > message_out
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pooja Katiyar <pooja.katiyar@intel.com>
Link: https://patch.msgid.link/0a81c2209eb299c1af191cd7ce758a92d5adf81b.1761773881.git.pooja.katiyar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for updating message out data structure for UCSI
ACPI interface for UCSI 2.1 and UCSI 3.0 commands such as
Set PDOs and LPM Firmware Update.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pooja Katiyar <pooja.katiyar@intel.com>
Link: https://patch.msgid.link/5bb1f367e44c9fc5244c3e10e513f02d62fe8166.1761773881.git.pooja.katiyar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update UCSI structure by adding fields for incoming and outgoing
messages. Update .sync_control function and other related functions
to use these new fields within the UCSI structure, instead of handling
them as separate parameters.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pooja Katiyar <pooja.katiyar@intel.com>
Link: https://patch.msgid.link/214b0a90c3220db33084ab714f4f33a004f70a41.1761773881.git.pooja.katiyar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The spec requires at least one interface respectively country.
It allows multiple ones. This needs to be clearly said in the UAPI.
This is subject to sanity checking in cdc_parse_cdc_header(), thus
we can trust the length.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20251111134641.4118827-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20251111095117.95023-1-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Renesas RZ/G3S SoC supports a power-saving mode in which power to most
SoC components is turned off, including the USB subsystem.
To properly restore from such a state, the reset signal needs to be
asserted/de-asserted during suspend/resume. Add reset assert/de-assert on
suspend/resume.
The resume code has been moved into a separate function to allow reusing
it in case reset_control_assert() from suspend fails.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251106143625.3050119-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Renesas RZ/G3S SoC supports a power-saving mode in which power to most
of the SoC components is turned off, including the USB blocks. On the
resume path, the reset signal must be de-asserted before applying any
settings to the USB registers. To handle this properly, call
reset_control_assert() and reset_control_deassert() during suspend and
resume, respectively.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251106143625.3050119-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Renesas RZ/G3S SoC supports a power-saving mode in which power to most
of the SoC components is turned off, including the USB blocks. On the
resume path, the reset signal must be de-asserted before applying any
settings to the USB registers. To handle this properly, call
reset_control_assert() and reset_control_deassert() during suspend and
resume, respectively.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20251106143625.3050119-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to check the entries in priv->clks[] array before passing
it to clk_disable_unprepare() as the clk_disable_unprepare() already
check if it receives a NULL or error pointer as argument. Remove this
check. This makes the code simpler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251106143625.3050119-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver contains orientation detection logic and correctly calls
typec_set_orientation(), but forgets to set the orientation_aware
capability, so the orientation value is not visible in sysfs - Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251107151311.2089806-1-peter@korsgaard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251107154236.306620-1-marco.crivellari@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Switch to using system_percpu_wq because system_wq is going away as part of
a workqueue restructuring.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251106152712.279042-1-marco.crivellari@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dwc2 on most platforms needs phy controller, clock and power supply.
All of them must be enabled/activated to properly operate. If dwc2
is configured as peripheral mode, then all the above three hardware
resources are disabled at the end of the probe:
/* Gadget code manages lowlevel hw on its own */
if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
dwc2_lowlevel_hw_disable(hsotg);
But the dwc2_suspend() tries to read the dwc2's reg to check whether
is_device_mode or not, this would result in hang during suspend if dwc2
is configured as peripheral mode.
Fix this hang by bypassing suspend/resume if lowlevel hw isn't
enabled.
Fixes: 09a75e8577 ("usb: dwc2: refactor common low-level hw code to platform.c")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20251104002503.17158-3-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dwc2 on most platforms needs phy controller, clock and power supply.
All of them must be enabled/activated to properly operate. If dwc2
is configured as peripheral mode, then all the above three hardware
resources are disabled at the end of the probe:
/* Gadget code manages lowlevel hw on its own */
if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
dwc2_lowlevel_hw_disable(hsotg);
But dwc2_driver_shutdown() tries to disable the interrupts on HW IP
level. This would result in hang during shutdown if dwc2 is configured
as peripheral mode.
Fix this hang by only disable and sync irq when lowlevel hw is enabled.
Fixes: 4fdf228cdf ("usb: dwc2: Fix shutdown callback in platform")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20251104002503.17158-2-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For UCSI 2.0 and above, since the orientation is part of the paylad,
set the orientation_aware by default and let the implementation specific
update_connector op override if necessary.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251028-b4-ucsi-set-orientation-aware-on-version-2-and-above-v1-1-d3425f5679af@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A failure to take a lock with O_NONBLOCK needs to result
in -EAGAIN. Change it.
Fixes: 66e3e59189 ("usb: Add driver for Altus Metrum ChaosKey device (v2)")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20251030093918.2248104-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each xHCI roothub port has a Port Link Info (PORTLI) register that is
used by USB3 and eUSB2V2 ports.
USB3 ports show link error count, rx lane count, and tx lane count.
eUSB2V2 ports show Rx Data Rate (RDR) and Tx Data Rate (TDR).
Rx/Tx Data Rate is a multiple of USB2 2.0 HS 480 Mb/s data rates,
and is only valid if a eUSB2V2 device is connected (CCS=1).
0 = "USB 2.0 HS" normal HS 480 Mb/s, no eUSB2V2 in use
1 = "HS1" Assymetric eUSB2V2 where this direction runs normal 480Mb/s
2 = "HS2" 960Mb/s
...
10 = "HS10" 4.8 Gb/s, max eUSB2V2 rate
PORTLI is Reserved and preserve "RsvdP" for normal USB2 ports
Sample output of USB3 port PORTLI:
cat /sys/kernel/debug/usb/xhci/0000:00:14.0/ports/port14/portli
0x00000000 LEC=0 RLC=0 TLC=0
Signed-off-by: Rai, Amardeep <amardeep.rai@intel.com>
Co-developed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-24-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert single bit-field macros to simple masks. The change makes the
masks more universal. Multi bit-field macros are changed in the next
commit. After both changes, all masks in xhci-caps.h will follow the
same format. I plan to introduce this change to all xhci macros.
Bit shift operations on a 32-bit signed can be problematic on some
architectures. Instead use BIT() macro, which returns a 64-bit unsigned
value. This ensures that the shift operation is performed on an unsigned
type, which is safer and more portable across different architectures.
Using unsigned integers for bit shifts avoids issues related to sign bits
and ensures consistent behavior.
Switch from 32-bit to 64-bit?
As far as I am aware, this does not cause any issues.
Performing bitwise operations between 32 and 64 bit values, the smaller
operand is promoted to match the size of the larger one, resulting in a
64-bit operation. This promotion extends the 32-bit value to 64 bits,
by zero-padding (for unsigned).
Will the change to 64-bit slow down the xhci driver?
On a 64-bit architecture - No. On a 32-bit architecture, yes? but in my
opinion the performance decrease does not outweigh the readability and
other benefits of using BIT() macro.
Why not use FIELD_GET() and FIELD_PREP()?
While they can be used for single bit macros, I prefer to use simple
bitwise operation directly. Because, it takes less space, is less overhead
and is as clear as if using FIELD_GET() and FIELD_PREP().
Why not use test_bit() macro?
Same reason as with FIELD_GET() and FIELD_PREP().
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-23-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the dependency of xhci-caps.h on xhci-ext-caps.h by eliminating 2
instances where macros in xhci-caps.h were redefined from xhci-ext-caps.h.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-22-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Max Scratchpad Buffers consist of two bit-fields:
bits 25:21 - Max Scratchpad Buffers High, 5 Most significant bits
bits 27:31 - Max Scratchpad Buffers Low, 5 Least significant bits
Combined they create the Max Scratchpad Buffers value.
Add two new macros, 'HCS_MAX_SP_HI' and 'HCS_MAX_SP_LO', to separately
extract the high and low parts of the Max Scratchpad Buffers. These are
then combined using 'HCS_MAX_SCRATCHPAD' macro. This change simplifies
the code and makes it similar to other split value register macros in the
xhci driver.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-21-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IST is represented by bits 2:0, with bit 3 indicating the unit of
measurement, Frames or Microframes. Introduce xhci_ist_microframes(),
which returns the IST value in Microframes, simplifying the code and
reducing duplication.
Improve documentation in xhci-caps.h to clarify the IST register specifics,
including the unit conversion details. These change removes the need to
explain it each time the IST values is retrieved.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-20-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No functional changes.
This patch updates comments in xhci-caps.h for better readability and
consistency. Each Capability Register bit field now includes a brief
description of its name and valid range, following a uniform comment
format across the file.
These updates are based on the xHCI specification, revision 1.2.
Bit field comment format:
/* <bit range> - <Field name>,<noteworthy information if any> */
Why print the bit range?
The bit range aids in identifying missing macros and reserved bit ranges.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-19-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xHCI driver defines only 128 interrupter register slots, yet allows up
to 2047 interrupters. According to the xHCI specification, the maximum
valid number of interrupters is 1024. These mismatches can lead to
out-of-range accesses and excessive memory use.
The Number of Interrupters (MaxIntrs) field occupies bits 18:8 of the
HCSPARAMS1 register, which can yield a value up to 2047, although the
specification limits it to 1024. Cap the value using the 'MAX_HC_INTRS'
macro.
Set 'xhci->max_intrs' to the minimum of the value reported by the
HCSPARAMS1 register and 'MAX_HC_INTRS'. The interrupter register slot
array is defined for 1024 entries, serving only as a structural template
and not increasing memory usage.
Although the xHCI specification allows up to 1024 interrupters, raising
'MAX_HC_INTRS' above 128 provides no practical benefit. The driver only
uses the primary interrupter (0), and secondary interrupters (1+) are
rarely, if ever, used in practice. No reports exist of usage beyond 128.
Therefore, I have limited it to 128.
Summary:
* Interrupter allocations are now limited to 128 from 2047.
* Interrupter Register template slots are set to 1024 from 128.
* Macro 'MAX_HC_INTRS' can be modified to set the interrupter limit.
==== Detailed interrupter explanation ====
There are two relevant components:
Interrupter array:
This holds the software interrupter structures and is allocated by the
xhci driver. The number of interrupters allocated is determined by the
HCSPARAMS1 register field, which specifies the supported interrupter
count.
Interrupter register slots:
This is a template struct used to access the hardware's runtime
registers. It is not allocated by the driver, the hardware defines and
owns this memory region, and the driver only maps it for MMIO access.
Each entry in the interrupter array points to its corresponding
interrupter register slot in the hardware region once that interrupter
is enabled.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-18-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xHCI driver allocates various port-related structures based on the
maximum number of ports reported by the controller. The Number of Ports
(MaxPorts) field occupies bits 31:24 of the HCSPARAMS1 register and can
represent values up to 255. However, the 'HCS_MAX_PORTS()' macro currently
reads bits 30:24, effectively limiting the maximum to 127.
Fixing the macro increases the reported port limit to 255, which in turn
increases memory usage regardless of how many ports are actually used.
To maintain compatibility and control memory consumption, set
'xhci->max_ports' to the minimum of the value read from 'HCS_MAX_PORTS()'
and 127 (MAX_HC_PORTS). This preserves the existing limit while making
the restriction explicit and easier to adjust in the future.
Summary:
* Port allocations are now limited to 127.
* HC max ports macro now correctly reads the MaxPorts value.
* Macro 'MAX_HC_PORTS' can be modified to set the port limit.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-17-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 32-bit read-only HCSPARAMS1 register contains the following fields:
Bits 7:0 - Number of Device Slots (MaxSlots)
Bits 18:8 - Number of Interrupters (MaxIntrs)
Bits 23:19 - Reserved
Bits 31:24 - Number of Ports (MaxPorts)
Since the register value is constant for the lifetime of the controller,
it is cached in 'xhci->hcs_params1'. However, platform drivers may
override the number of interrupters through a separate variable,
'xhci->max_interrupters', leaving only the maximum slots and ports values
still derived from the cached register.
To simplify the code and improve readability, replace 'xhci->hcs_params1'
with two dedicated 'u8' fields: 'xhci->max_slots' and 'xhci->max_ports'.
These values are initialized once and used directly instead of calling
'HCS_MAX_SLOTS()' and 'HCS_MAX_PORTS()' macros.
This change reduces code clutter without increasing memory usage.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Structural Parameters 1 (HCSPARAMS1) register is read and cached in
'xhci->hcs_params1' during host controller initialization. Since this
register is read-only and its value remains constant for the lifetime of
the controller, re-reading it later is unnecessary.
Replace subsequent register reads with the cached 'xhci->hcs_params1'
value to avoid redundant MMIO access.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove endpoint number 'ep_num' argument and memory operation from
xhci_log_ctx() trace function. These changes were added in commit
1d27fabec0 ("xhci: add xhci_address_ctx trace event") on Aug 14, 2013
and have never been used.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-14-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Device Context Base Address Array (DCBAA) contains pointers to device
contexts. These fields are 64-bit registers, capable of holding 64-bit
addresses.
When struct 'xhci_device_context_array' was introduced in commit [1],
the entries were represented as pairs of 'u32', requiring a custom helper
function to set 64-bit addresses. This was later made redundant by
commit [2], which changed the representation to a single 'u64', allowing
direct assignment.
The associated TODO comment referencing the old 32-bit representation is
no longer relevant and is removed.
Link: https://git.kernel.org/torvalds/c/a74588f94655 [1]
Link: https://git.kernel.org/torvalds/c/8e595a5d30a5 [2]
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-13-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Switch to using system_percpu_wq because system_wq is going away as part of
a workqueue restructuring.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some old HCs ignore transfer ring link TRBs whose chain bit is unset.
This breaks endpoint operation and sometimes makes it execute other
ring's TDs, which may corrupt their buffers or cause unwanted device
action. We avoid this by chaining all link TRBs on affected rings.
Fix an omission which allows them to be unchained by cancelling TDs.
The patch was tested by reproducing this condition on an isochronous
endpoint (non-power-of-two TDs are sometimes split not to cross 64K)
and printing link TRBs in trb_to_noop() on good and buggy HCs.
Actual hardware malfunction is rare since it requires Missed Service
Error shortly before the unchained link TRB, at least on NEC and AMD.
I have never seen it after commit bb0ba4cb10 ("usb: xhci: Apply the
link chain quirk on NEC isoc endpoints"), but it's Russian roulette
and I can't test all affected hosts and workloads. Fairly often MSEs
happen after cancellation because the endpoint was stopped.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xHCI 4.8.3 recommends that software should simply assume endpoints to
halt after certain events, without looking at the Endpoint Context for
confirmation, because HCs may be slow to update that.
While no cases of such "slowness" appear to be known, different problem
exists on AMD Promontory chipsets: they may halt and generate a transfer
event, but fail to ever update the Endpoint Context at all, at least not
until some command is queued and fails with Context State Error. This is
easily triggered by disconnecting D- of a full speed serial device.
Possibly similar bug in non-AMD hardware has been reported to linux-usb.
In such case, failed TD is given back without erasing from the ring and
endpoint isn't reset. If some URB is unlinked later, Stop Endpoint fails
and its handler resets the endpoint. On next submission it will restart
on the stale TD. Outcome is UAF on success, or another halt on error and
then Dequeue doesn't move and URBs are stuck. Unlinking and resubmitting
the URBs causes unlimited ring expansion if the situation repeats.
This can be solved by ignoring Endpoint Context State and trusting that
endpoints halt when required, except one known case in ancient hardware.
The check for "Already resolving halted ep" becomes redundant, because
for these completion codes we now jump to xhci_handle_halted_endpoint()
which deals with pending EP_HALTED internally.
Link: https://lore.kernel.org/linux-usb/20250311234139.0e73e138@foxbook/
Link: https://lore.kernel.org/linux-usb/20250918055527.4157212-1-zhangjinpeng@kylinos.cn/
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, each port's 'addr' field pointed to the base of the Host
Controller USB Port Register Set, and specific registers were accessed
using macros such as (port->addr + PORTPMSC).
This patch replaces the raw '__le32 __iomem *addr' pointer with a typed
'struct xhci_port_regs __iomem *port_reg' pointer. With this change,
individual registers can be accessed directly through the structure
fields:
Before:
port->addr
port->addr + PORTPMSC
port->addr + PORTLI
port->addr + PORTHLPMC
After:
port->port_reg->portsc
port->port_reg->portpmsc
port->port_reg->portli
port->port_reg->porthlpmc
This improves code readability and makes register access more intuitive
by using named struct members instead of pointer arithmetic and macros.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a new struct for the Host Controller USB Port Register Set to
enhance readability and maintainability.
The Host Controller Operational Registers (struct 'xhci_op_regs') span from
offset 0x0 to 0x3FF and consist of fixed fields. Following these fixed
fields are the Host Controller USB Port Register Sets, which are dynamic
and repeat from 1 to MaxPorts, as defined by HCSPARAMS1.
Currently, the struct 'xhci_op_regs' includes:
__le32 port_status_base; The first PORTSC
__le32 port_power_base; The first PORTPMSC
__le32 port_link_base; The first PORTLI
__le32 reserved5; The first PORTHLPMC, not reserved
__le32 reserved6[NUM_PORT_REGS*254]; Port registers 2 to MaxPorts
Replace this with the simpler:
struct xhci_port_regs port_regs[]; Port registers 1 to MaxPorts
Host Controller USB Port Register Set:
| Offset | Mnemonic | Register Name
--------------------------------------------------------------------------
| 0x0 | PORTSC | Port Status and Control
| 0x4 | PORTPMSC | Port Power Management Status and Control
| 0x8 | PORTLI | Port Link Info
| 0xC | PORTHLPMC | Port Hardware LPM Control
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a dedicated helper function to read the USB Port Status and Control
(PORTSC) register. This complements xhci_portsc_writel() and improves code
clarity by providing a clear counterpart for reading the register.
Suggested-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Peter Chen <peter.chen@kerne.org>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a dedicated write function for the USB Port Register Set (PORTSC)
that includes tracing capabilities for values written to the PORTSC
register. This enhancement minimizes code duplication and improves
debugging.
The PORTSC register is part of the Host Controller USB Port Register Set,
comprising 4 x 32-bit registers. As the first register, PORTSC is accessed
directly via 'port->addr'. Future commits will introduce a dedicated Port
register struct to further streamline access.
By adding the xhci_portsc_writel() function prior to these changes, we
significantly reduce the number of same line modifications required.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rework xhci_decode_portsc(), which is used for PORTSC tracing, to make
the output more compact and general.
The function now first prints the multi-bit fields (port speed and link
state), followed by the abbreviated names of each individual bit as
defined in the xHCI specification. This reduces message length and makes
the output easier to read.
This change prepares for upcoming patches that will trace all PORTSC
writes, requiring the same decoding logic to handle both reads and writes.
This is particularly important for Read-Write-1-to-Clear (RW1C) bits,
where the semantics differ between read and write operations. For
example, when reading the Port Enabled bit, a set bit means the port is
enabled; when writing, a set bit indicates the port is being disabled.
The decoder now also includes the following fields:
Port Link State Write Strobe (LWS)
Device Removable (DR)
Warm Port Reset (WPR)
==== Examples Traces ====
Before:
0x00201201 Powered Connected Disabled Link:U0 PortSpeed:4 Change: PRC Wake:
0x0a0002a0 Powered Not-connected Disabled Link:RxDetect PortSpeed:0 \
Change: Wake: WCE WOE
After:
0x00201201 Speed=4 Link=U0 CCS PP PRC
0x0a0002a0 Speed=0 Link=RxDetect PP WCE WOE
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The trb_in_td() checking is quite complex, especially when checking for
TRBs in ranges that can span several segments.
Simplify the search by creating a position index for each TRB on the
ring, and just compare the position indexes.
Add a more generic dma_in_range() helper that checks if a trb dma
address is in the range between a start and end trb and call it from
trb_in_td()
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a xhci_dma_to_trb() helper, and use it to find the transfer TRB
early in handle_tx_event() based on the dma address found in the
event TRB.
With this helper we can avoid using 'ep_seg' transfer TRB segment
variable as both a a boolean to indicate if the transfer TRB is part
of the next queued TD, and to actually find the transfer TRB based
on ep_seg and ep_trb_dma.
This is a first step in reworking and cleaning up trb_in_td() and
handle_tx_event()
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct the kernel-doc notation in xhck-mtk.h to avoid most kernel-doc
warnings. Summary of changes:
- don't use /** to begin comments that are not in kernel-doc format
- add missing "struct mu3h_sch_tt" kernel-doc line
- convert several "struct mu3h_...:" to using " - " to separate the
struct name from its short description
- add a missing @speed: struct member description
Warning messages that are fixed:
xhci-mtk.h:25: warning: This comment starts with '/**', but isn't a
kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* To simplify scheduler algorithm, set a upper limit for ESIT,
xhci-mtk.h:25: warning: missing initial short description on line:
* To simplify scheduler algorithm, set a upper limit for ESIT,
Warning: drivers/usb/host/xhci-mtk.h:36 Cannot find identifier on line:
* @fs_bus_bw_out: save bandwidth used by FS/LS OUT eps in each uframes
Warning: drivers/usb/host/xhci-mtk.h:37 Cannot find identifier on line:
* @fs_bus_bw_in: save bandwidth used by FS/LS IN eps in each uframes
Warning: drivers/usb/host/xhci-mtk.h:38 Cannot find identifier on line:
* @ls_bus_bw: save bandwidth used by LS eps in each uframes
Warning: drivers/usb/host/xhci-mtk.h:39 Cannot find identifier on line:
* @fs_frame_bw: save bandwidth used by FS/LS eps in each FS frames
Warning: drivers/usb/host/xhci-mtk.h:40 Cannot find identifier on line:
* @in_ss_cnt: the count of Start-Split for IN eps
Warning: drivers/usb/host/xhci-mtk.h:41 Cannot find identifier on line:
* @ep_list: Endpoints using this TT
Warning: drivers/usb/host/xhci-mtk.h:42 Cannot find identifier on line:
*/
Warning: drivers/usb/host/xhci-mtk.h:43 Cannot find identifier on line:
struct mu3h_sch_tt {
Warning: drivers/usb/host/xhci-mtk.h:44 Cannot find identifier on line:
u16 fs_bus_bw_out[XHCI_MTK_MAX_ESIT];
Warning: drivers/usb/host/xhci-mtk.h:45 Cannot find identifier on line:
u16 fs_bus_bw_in[XHCI_MTK_MAX_ESIT];
Warning: drivers/usb/host/xhci-mtk.h:46 Cannot find identifier on line:
u8 ls_bus_bw[XHCI_MTK_MAX_ESIT];
Warning: drivers/usb/host/xhci-mtk.h:47 Cannot find identifier on line:
u16 fs_frame_bw[XHCI_MTK_FRAMES_CNT];
Warning: drivers/usb/host/xhci-mtk.h:48 Cannot find identifier on line:
u8 in_ss_cnt[XHCI_MTK_MAX_ESIT];
Warning: drivers/usb/host/xhci-mtk.h:49 Cannot find identifier on line:
struct list_head ep_list;
Warning: drivers/usb/host/xhci-mtk.h:50 Cannot find identifier on line:
};
Warning: drivers/usb/host/xhci-mtk.h:51 Cannot find identifier on line:
Warning: drivers/usb/host/xhci-mtk.h:52 Cannot find identifier on line:
/**
Warning: drivers/usb/host/xhci-mtk.h:121 struct member 'speed' not
described in 'mu3h_sch_ep_info'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251104070216.907540-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i.MX95 DWC3 inside HSIOMIX could still wakeup Linux, even if HSIOMIX
power domain(Digital logic) is off. There is still always on logic
have the wakeup capability which is out band wakeup capbility.
So use device_set_out_band_wakeup for i.MX95 to make sure DWC3 could
wakeup system even if HSIOMIX power domain is in off state.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
i.MX95 USB2 inside HSIOMIX could still wakeup Linux, even if HSIOMIX
power domain(Digital logic) is off. There is still always on logic
have the wakeup capability which is out band wakeup capbility.
So use device_set_out_band_wakeup for i.MX95 to make sure usb2 could
wakeup system even if HSIOMIX power domain is in off state.
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When add a platform device by calling ci_hdrc_add_device(), this device
will reuse OF node of its parent device. If power-domains property is
provided in the OF node, both two platform devices will be attached to
the same power domain. This should be unnecessary and may bring other
inconsistent behavior. For example, to support wakeup capability, these
two platform device need different power domain state. The parent device
need NOT power domain on for out-band interrupt, but the ci_hdrc device
need power domain on for in-band interrupt. The i.MX95 Soc support
out-band wakeup interrupt, the user need to enable wakeup for the parent
device, but if the user also enable wakeup for ci_hdrc device, the power
domain will keep at on state finally. To exclude such inconsistent
behavior and simplify the power management, detach power domain for ci_hdrc
platform device.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
All files are regular; ep0 is there all along, other ep* may appear
and go away during the filesystem lifetime; all of those are guaranteed
to be gone by the time we umount it.
Object creation is in ffs_sb_create_file(), removals - at ->kill_sb()
time (for ep0) or by simple_remove_by_name() from ffs_epfiles_destroy()
(for the rest of them).
Switch ffs_sb_create_file() to simple_start_creating()/d_make_persistent()/
simple_done_creating() and that's it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
No need to return dentry from ffs_sb_create_file() or keep it around
afterwards.
To avoid subtle issues with getting to ffs from epfiles in
ffs_epfiles_destroy(), pass the superblock as explicit argument.
Callers have it anyway.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ffs_epfile_open() can race with removal, ending up with file->private_data
pointing to freed object.
There is a total count of opened files on functionfs (both ep0 and
dynamic ones) and when it hits zero, dynamic files get removed.
Unfortunately, that removal can happen while another thread is
in ffs_epfile_open(), but has not incremented the count yet.
In that case open will succeed, leaving us with UAF on any subsequent
read() or write().
The root cause is that ffs->opened is misused; atomic_dec_and_test() vs.
atomic_add_return() is not a good idea, when object remains visible all
along.
To untangle that
* serialize openers on ffs->mutex (both for ep0 and for dynamic files)
* have dynamic ones use atomic_inc_not_zero() and fail if we had
zero ->opened; in that case the file we are opening is doomed.
* have the inodes of dynamic files marked on removal (from the
callback of simple_recursive_removal()) - clear ->i_private there.
* have open of dynamic ones verify they hadn't been already removed,
along with checking that state is FFS_ACTIVE.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... otherwise we just might free ffs with ffs->reset_work
still on queue. That needs to be done after ffs_data_reset() -
that's the cutoff point for configfs accesses (serialized
on gadget_info->lock), which is where the schedule_work()
would come from.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A reference is held by the superblock (it's dropped in ffs_kill_sb())
and filesystem will not get to ->kill_sb() while there are any opened
files, TYVM...
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ffs_data_closed() has a seriously confusing logics in it: in addition
to the normal "decrement a counter and do some work if it hits zero"
there's "... and if it has somehow become negative, do that" bit.
It's not a race, despite smelling rather fishy. What really happens
is that in addition to "call that on close of files there, to match
the increments of counter on opens" there's one call in ->kill_sb().
Counter starts at 0 and never goes negative over the lifetime of
filesystem (or we have much worse problems everywhere - ->release()
call of some file somehow unpaired with successful ->open() of the
same). At the filesystem shutdown it will be 0 or, again, we have
much worse problems - filesystem instance destroyed with files on it
still open. In other words, at that call and at that call alone
the decrement would go from 0 to -1, hitting that chunk (and not
hitting the "if it hits 0" part).
So that check is a weirdly spelled "called from ffs_kill_sb()".
Just expand the call in the latter and kill the misplaced chunk
in ffs_data_closed().
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
NDI devices have been using a latency timer of 1 ms since commit
b760dac290 ("USB: ftdi: support NDI devices"), which also added a
vendor specific module parameter that could be used to override the
default value for these devices.
Module parameters should generally be avoided as they apply to all
devices managed by a driver and vendor specific hacks should be kept out
of mainline.
Drop the module parameter in favour of the generic sysfs interface for
setting the latency timer (e.g. using udev rules) while keeping the
default 1 ms timer for NDI devices.
Note that there seems to be no (correct) public references to the module
parameter and most likely no one is using it.
Cc: Ryan Mann <rmann@ndigital.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
NDI devices remap the 19200 line speed to 1.2 Mbps.
Use the quirk pointer from the match table to enable the quirk instead
of comparing PIDs on every speed change.
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the quirk function comments that were using odd formatting and
were referring to a non-existing function.
Signed-off-by: Johan Hovold <johan@kernel.org>
Rewrite the 8u2232c quirk to avoid the manufacturer and product string
comparisons for the second port which will always be bound.
Signed-off-by: Johan Hovold <johan@kernel.org>
Probe of a device should generally be silent unless errors are
encountered.
Stop logging that the JTAG port is ignored when probing devices with
such a reserved port.
This also maintains consistency with devices that match on interface
number to avoid binding to reserved ports.
Note that the message is not even correct for the second port of the ST
Micro Connect Lite.
Signed-off-by: Johan Hovold <johan@kernel.org>
Some FTDI devices have the first port reserved for JTAG and have been
using a dedicated quirk to prevent binding to it.
As can be inferred directly or indirectly from the commit messages,
almost all of these devices are dual port devices which means that the
more recently added macro for matching on interface number can be used
instead (and some such devices do so already).
This avoids probing interfaces that will never be bound and cleans up
the match table somewhat.
Note that the JTAG quirk is kept for quad port devices, which would
otherwise require three match entries.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
When the PM core uses hibernation callbacks for shutdown drivers
will receive PM_EVENT_POWEROFF and should handle it the same as
PM_EVENT_HIBERNATE would have been used.
Tested-by: Eric Naim <dnaim@cachyos.org>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Changelog adjustment ]
Link: https://patch.msgid.link/20251112224025.2051702-4-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here are some more modem and ftdi device ids.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaRRElgAKCRALxc3C7H1l
CKLjAQDdFvsO5vCAleIC/OJPsq7fMqH3CY9Os2kGOSYErtsh+AD+PA0h2Nfqk04D
l1Qsm8zfW21CtXOwl0rwZeLavbg+KA4=
=wxRc
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.18-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial devices ids for 6.18-rc6
Here are some more modem and ftdi device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.18-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add support for Rolling RW101R-GL
USB: serial: ftdi_sio: add support for u-blox EVK-M101
The ucsi_psy_get_current_max function defaults to 0.1A when it is not
clear how much current the partner device can support. But this does
not check the port is connected, and will report 0.1A max current when
nothing is connected. Update ucsi_psy_get_current_max to report 0A when
there is no connection.
Fixes: af833e7f7d ("usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default")
Cc: stable@vger.kernel.org
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Rule: add
Link: https://lore.kernel.org/stable/20251017000051.2094101-1-jthies%40google.com
Link: https://patch.msgid.link/20251106011446.2052583-1-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCI device IDs were organised based on the Intel
architecture generation in most cases, but not with every
ID. That left the device ID table with no real order.
Sorting the table based on the device ID.
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251107121548.2702900-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the necessary PCI ID for Intel Nova Lake -S
devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251106115926.2317877-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysdev_is_parent check was being used to infer PCI devices that have
the DMA mask set from the PCI capabilities, but sysdev_is_parent is also
used for non-PCI ACPI devices in which case the DMA mask would be the
bus default or as set by the _DMA method.
Without this fix the DMA mask would default to 32-bits and so allocation
would fail if there was no DRAM below 4GB.
Fixes: 47ce45906c ("usb: dwc3: leave default DMA for PCI devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Jamie Iles <jamie.iles@oss.qualcomm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251107104437.1602509-1-punit.agrawal@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A kernel memory leak was identified by the 'ioctl_sg01' test from Linux
Test Project (LTP). The following bytes were mainly observed: 0x53425355.
When USB storage devices incorrectly skip the data phase with status data,
the code extracts/validates the CSW from the sg buffer, but fails to clear
it afterwards. This leaves status protocol data in srb's transfer buffer,
such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can
lead to USB protocols leaks to user space through SCSI generic (/dev/sg*)
interfaces, such as the one seen here when the LTP test requested 512 KiB.
Fix the leak by zeroing the CSW data in srb's transfer buffer immediately
after the validation of devices that skip data phase.
Note: Differently from CVE-2018-1000204, which fixed a big leak by zero-
ing pages at allocation time, this leak occurs after allocation, when USB
protocol data is written to already-allocated sg pages.
Fixes: a45b599ad8 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()")
Cc: stable <stable@kernel.org>
Signed-off-by: Desnes Nunes <desnesn@redhat.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20251031043436.55929-1-desnesn@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uttkarsh Aggarwal observed a kernel panic during sideband un-register
and found it was caused by a race condition between sideband unregister,
and creating sideband interrupters.
The issue occurrs when thread T1 runs uaudio_disconnect() and released
sb->xhci via sideband_unregister, while thread T2 simultaneously accessed
the now-NULL sb->xhci in xhci_sideband_create_interrupter() resulting in
a crash.
Ensure new endpoints or interrupter can't be added to a sidenband after
xhci_sideband_unregister() cleared the existing ones, and unlocked the
sideband mutex.
Reorganize code so that mutex is only taken and released once in
xhci_sideband_unregister(), and clear sb->vdev while mutex is taken.
Use mutex guards to reduce human unlock errors in code
Refuse to add endpoints or interrupter if sb->vdev is not set.
sb->vdev is set when sideband is created and registered.
Reported-by: Uttkarsh Aggarwal <uttkarsh.aggarwal@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-usb/20251028080043.27760-1-uttkarsh.aggarwal@oss.qualcomm.com
Fixes: de66754e9f ("xhci: sideband: add initial api to register a secondary interrupter entity")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251107162819.1362579-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Data read from a DbC device may be corrupted due to a race between
ongoing write and write request completion handler both queuing new
transfer blocks (TRBs) if there are remining data in the kfifo.
TRBs may be in incorrct order compared to the data in the kfifo.
Driver fails to keep lock between reading data from kfifo into a
dbc request buffer, and queuing the request to the transfer ring.
This allows completed request to re-queue itself in the middle of
an ongoing transfer loop, forcing itself between a kfifo read and
request TRB write of another request
cpu0 cpu1 (re-queue completed req2)
lock(port_lock)
dbc_start_tx()
kfifo_out(fifo, req1->buffer)
unlock(port_lock)
lock(port_lock)
dbc_write_complete(req2)
dbc_start_tx()
kfifo_out(fifo, req2->buffer)
unlock(port_lock)
lock(port_lock)
req2->trb = ring->enqueue;
ring->enqueue++
unlock(port_lock)
lock(port_lock)
req1->trb = ring->enqueue;
ring->enqueue++
unlock(port_lock)
In the above scenario a kfifo containing "12345678" would read "1234" to
req1 and "5678" to req2, but req2 is queued before req1 leading to
data being transmitted as "56781234"
Solve this by adding a flag that prevents starting a new tx if we
are already mid dbc_start_tx() during the unlocked part.
The already running dbc_do_start_tx() will make sure the newly completed
request gets re-queued as it is added to the request write_pool while
holding the lock.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251107162819.1362579-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A usb device caught behind a link in ss.Inactive error state needs to
be reset to recover. A VDEV_PORT_ERROR flag is used to track this state,
preventing new transfers from being queued until error is cleared.
This flag may be left uncleared if link goes to error state between two
resets, and print the following message:
"xhci_hcd 0000:00:14.0: Can't queue urb, port error, link inactive"
Fix setting and clearing the flag.
The flag is cleared after hub driver has successfully reset the device
when hcd->reset_device is called. xhci-hcd issues an internal "reset
device" command in this callback, and clear all flags once the command
completes successfully.
This command may complete with a context state error if slot was recently
reset and is already in the defauilt state. This is treated as a success
but flag was left uncleared.
The link state field is also unreliable if port is currently in reset,
so don't set the flag in active reset cases.
Also clear the flag immediately when link is no longer in ss.Inactive
state and port event handler detects a completed reset.
This issue was discovered while debugging kernel bugzilla issue 220491.
It is likely one small part of the problem, causing some of the failures,
but root cause remains unknown
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220491
Fixes: b8c3b71808 ("usb: xhci: Don't try to recover an endpoint if port is in error state.")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251107162819.1362579-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The U-Blox EVK-M101 enumerates as 1546:0506 [1] with four FTDI interfaces:
- EVK-M101 current sensors
- EVK-M101 I2C
- EVK-M101 UART
- EVK-M101 port D
Only the third USB interface is a UART. This change lets ftdi_sio probe
the VID/PID and registers only interface #3 as a TTY, leaving the rest
available for other drivers.
[1]
usb 5-1.3: new high-speed USB device number 11 using xhci_hcd
usb 5-1.3: New USB device found, idVendor=1546, idProduct=0506, bcdDevice= 8.00
usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.3: Product: EVK-M101
usb 5-1.3: Manufacturer: u-blox AG
Datasheet: https://content.u-blox.com/sites/default/files/documents/EVK-M10_UserGuide_UBX-21003949.pdf
Signed-off-by: Oleksandr Suvorov <cryosay@gmail.com>
Link: https://lore.kernel.org/20250926060235.3442748-1-cryosay@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
The driver uses pcim_enable_device() to enable the PCI device,
the device will be automatically disabled on driver detach through
the managed device framework. The manual pci_disable_device() calls
in the error paths are therefore redundant and should be removed.
Found via static anlaysis and this is similar to commit 99ca0b57e4
("thermal: intel: int340x: processor: Fix warning during module unload").
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20251026090859.33107-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A race condition during gadget teardown can lead to a use-after-free
in usb_gadget_state_work(), as reported by KASAN:
BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0
Workqueue: events usb_gadget_state_work
The fundamental race occurs because a concurrent event (e.g., an
interrupt) can call usb_gadget_set_state() and schedule gadget->work
at any time during the cleanup process in usb_del_gadget().
Commit 399a45e523 ("usb: gadget: core: flush gadget workqueue after
device removal") attempted to fix this by moving flush_work() to after
device_del(). However, this does not fully solve the race, as a new
work item can still be scheduled *after* flush_work() completes but
before the gadget's memory is freed, leading to the same use-after-free.
This patch fixes the race condition robustly by introducing a 'teardown'
flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is
set during cleanup in usb_del_gadget() *before* calling flush_work() to
prevent any new work from being scheduled once cleanup has commenced.
The scheduling site, usb_gadget_set_state(), now checks this flag under
the lock before queueing the work, thus safely closing the race window.
Fixes: 5702f75375 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://patch.msgid.link/20251023054945.233861-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to UCSI 2.0 specification, the orientation is
part of the connector status payload. So tie up the port
orientation.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20251028-usb-typec-ucsi-orientation-v2-1-9330478bb6c1@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SET_POWER_LEVEL to list of commands supported by UCSI debugfs.
Signed-off-by: Venkat Jayaraman <venkat.jayaraman@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251026235830.936477-1-venkat.jayaraman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix unconventional kernel-doc lines to avoid warnings.
Summary of changes:
- change non-kernel-doc comments from "/**" to "/*"
- add "enum <enum-name> - short description" for undescribed enums
- use leading '@' for describing enum members and struct members
- add "struct <struct-name> - short description" for undescribed structs
Repair and remove invalid or unconventional lines in mtu3.h:
(This list is a combination of warnings from the old kernel-doc.pl and
the new kernel-doc.py scripts. This combo provides better coverage
of all problems.)
mtu3.h:69: warning: This comment starts with '/**', but isn't a
kernel-doc comment.
* IP TRUNK version
mtu3.h:69: warning: missing initial short description on line:
* IP TRUNK version
mtu3.h:78: warning: This comment starts with '/**', but isn't a
kernel-doc comment.
* Normally the device works on HS or SS, to simplify fifo management,
mtu3.h:78: warning: missing initial short description on line:
* Normally the device works on HS or SS, to simplify fifo management,
mtu3.h:89: warning: This comment starts with '/**', but isn't
a kernel-doc comment.
* Maximum size of ep0 response buffer for ch9 requests,
mtu3.h:89: warning: missing initial short description on line:
* Maximum size of ep0 response buffer for ch9 requests,
mtu3.h:106: warning: Cannot understand * @MU3D_EP0_STATE_SETUP: waits for
SETUP or received a SETUP
on line 106 - I thought it was a doc line
mtu3.h:130: warning: cannot understand function prototype:
'enum mtu3_dr_force_mode'
mtu3.h:137: warning: Cannot understand * @base: the base address of fifo
on line 137 - I thought it was a doc line
mtu3.h:148: warning: missing initial short description on line:
* General Purpose Descriptor (GPD):
mtu3.h:174: warning: cannot understand function prototype:
'struct qmu_gpd'
mtu3.h:189: warning: cannot understand function prototype:
'struct mtu3_gpd_ring'
mtu3.h:198: warning: Cannot understand * @vbus: vbus 5V used by host mode
on line 198 - I thought it was a doc line
mtu3.h:225: warning: Cannot understand * @mac_base: register base address
of device MAC, exclude xHCI's
on line 225 - I thought it was a doc line
mtu3.h:275: warning: cannot understand function prototype: 'struct mtu3_ep'
Warning: drivers/usb/mtu3/mtu3.h:135 Enum value 'MTU3_DR_FORCE_NONE'
not described in enum 'mtu3_dr_force_mode'
Warning: drivers/usb/mtu3/mtu3.h:135 Enum value 'MTU3_DR_FORCE_HOST'
not described in enum 'mtu3_dr_force_mode'
Warning: drivers/usb/mtu3/mtu3.h:135 Enum value 'MTU3_DR_FORCE_DEVICE'
not described in enum 'mtu3_dr_force_mode'
Warning: drivers/usb/mtu3/mtu3.h:270 Cannot find identifier on line:
* @fifo_size: it is (@slot + 1) * @fifo_seg_size
Warning: drivers/usb/mtu3/mtu3.h:271 Cannot find identifier on line:
* @fifo_seg_size: it is roundup_pow_of_two(@maxp)
Warning: drivers/usb/mtu3/mtu3.h:272 Cannot find identifier on line:
*/
Warning: drivers/usb/mtu3/mtu3.h:273 Cannot find identifier on line:
struct mtu3_ep {
Warning: drivers/usb/mtu3/mtu3.h:274 Cannot find identifier on line:
struct usb_ep ep;
Warning: drivers/usb/mtu3/mtu3.h:275 Cannot find identifier on line:
char name[12];
Warning: drivers/usb/mtu3/mtu3.h:276 missing initial short description
on line:
struct mtu3 *mtu;
This removes all of the invalid/unconventional kernel-doc attempts but
still leaves quite a few struct members in structs ssusb_mtk, mtu3_ep,
and mtu3 without kernel-doc descriptions.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251026224558.826143-2-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'struct hc_driver' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
52065 23176 256 75497 126e9 drivers/usb/host/xen-hcd.o
After:
=====
text data bss dec hex filename
52897 22344 256 75497 126e9 drivers/usb/host/xen-hcd.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/63241c9e857646d895ce615b998d41ee4829f9e3.1761475831.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop unnecessary initialisation of variables that are always assigned
before being used.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up set_termios() by using a shorter identifier for the control
request value, replacing a ternary operator and adding some missing
braces to make it more readable.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Refactor by adding two control request helpers to make the code more
readable.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the driver device type checks by moving logical operators to
the previous line and using consistent indentation of continuation
lines.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the tiocmset() implementation by simplifying the flag check,
dropping some dev_dbg(), logging errors using dev_err() and using a
common control message call for both DTR and RTS to make the existing
logic easier to follow.
Note that the modem control lines are currently only manipulated in this
function, which therefore does not require any locking.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the tiocmset() implementation by dropping the dtr and rts flags
to make the logic a little easier to follow.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Asserting or deasserting a modem control line using TIOCMBIS or TIOCMBIC
should not deassert any lines that are not in the mask.
Fix this long-standing issue dating back to 2003 when the support for
these ioctls was added with the introduction of the tiocmset() callback.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Asserting or deasserting a modem control line using TIOCMBIS or TIOCMBIC
should not deassert any lines that are not in the mask.
Fix this long-standing regression dating back to 2003 when the
tiocmset() callback was introduced.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
UCSI v2 specification has increased the MSG_IN and MSG_OUT size from
16 bytes to 256 bytes each for the message exchange between OPM and PPM
This makes the total buffer size increase from 48 bytes to 528 bytes.
Update the buffer size to support this increase.
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251022004554.1956729-3-anjelique.melendez@oss.qualcomm.com
Update the ucsi request/response buffers to be packed to ensure there
are no "holes" in memory while we read/write these structs.
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251022004554.1956729-2-anjelique.melendez@oss.qualcomm.com
There is a possibility of user needs for USB mode switching on boards
that lack external hardware support for dynamic host/device role
detection. This is particularly relevant in automotive applications
where userspace applications need to switch USB roles (host to device)
at runtime for CarPlay/Android Auto integration.
Add an `allow_userspace_control` flag to handle such cases. When
enabled, it exposes a sysfs attribute that allows userspace to switch
the USB role manually between host and device. This provides flexibility
for platforms that cannot rely on hardware-based mode detection.
The role switch can be done as below
echo host > /sys/class/usb_role/<ADDR>.usb-role-switch/role
echo device > /sys/class/usb_role/<ADDR>.usb-role-switch/role
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251024085455.789555-1-pritam.sutar@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some new modem device ids.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaPs3+QAKCRALxc3C7H1l
CD45AQDpZXxs99B1iutLEHKUeXXaMDQAAHuOapQ4TaU4RNaeOwD+INDscrQhqYjs
HzDfPFMD+vwZgS7BwXwtygCb72VNhg8=
=eK7W
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.18-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial device ids for 6.18-rc3
Here are some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.18-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
USB: serial: option: add UNISOC UIS7720
After commit 18a9ec886d ("usb: uhci: Add Aspeed AST2700 support"),
clang incorrectly warns:
In file included from drivers/usb/host/uhci-hcd.c:855:
drivers/usb/host/uhci-platform.c:69:32: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
69 | static const u64 dma_mask_64 = DMA_BIT_MASK(64);
| ^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:93:54: note: expanded from macro 'DMA_BIT_MASK'
93 | #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
| ^ ~~~
clang has a long outstanding and complicated problem [1] with generating
a proper control flow graph at global scope, resulting in it being
unable to understand that this shift can never happen due to the
'n == 64' check.
Restructure the code to only use DMA_BIT_MASK() within
uhci_hcd_platform_probe() (i.e., function scope) to avoid this global
scope issue, similar to the approach of commit 274f2232a9 ("usb: ehci:
Add Aspeed AST2700 support").
Closes: https://github.com/ClangBuiltLinux/linux/issues/2136
Link: https://github.com/ClangBuiltLinux/linux/issues/92 [1]
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://patch.msgid.link/20251015-usb-uhci-avoid-bogus-clang-shift-warning-v2-1-68532d2f6114@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This chip can do some more than the driver currently describes. Add
support for configuring it for various flavors of TBT3/USB4 operation.
Reviewed-by: Jack Pham <jack.pham@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251014-topic-ps883x_usb4-v1-3-e6adb1a4296e@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to extend it with new alt/USB modes, rework the code a
bit by changing the flow into a pair of switch statements.
Reviewed-by: Jack Pham <jack.pham@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251014-topic-ps883x_usb4-v1-2-e6adb1a4296e@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Certain Type-C mode configurations may result in identical settings of
the PS8830. Check if the latter have changed instead of assuming
there's always a difference.
ps883x_set() is changed to accept a typec_retimer_state in preparation
for more work and the ps883x_sw_set() (which only handles orientation
switching) is changed to use regmap_assign_bits(), which itself does
not perform any writes if the desired value is already set.
Reviewed-by: Jack Pham <jack.pham@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251014-topic-ps883x_usb4-v1-1-e6adb1a4296e@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the UCSI interface driver to report a power supply change when
the PPM sets the Sink Path Change bit.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Tested-By: Kenneth R. Crudup <kenny@panix.com>
Link: https://patch.msgid.link/20251016235909.2092917-4-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Report opmode changes from the PPM to the power supply class by calling
ucsi_port_psy_changed(). If the current opmode is USB PD, do not call
ucsi_port_psy_changed(). The power supply class will be updated after
requesting partner source PDOs.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-By: Kenneth R. Crudup <kenny@panix.com>
Link: https://patch.msgid.link/20251016235909.2092917-3-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for power supply status. If a port is acting as a sink
with the sink path enabled, report it is charging. If a port is
source, report it is discharging. If there is no connection or the
port hasn't enabled the sink path, report not charging.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Tested-By: Kenneth R. Crudup <kenny@panix.com>
Link: https://patch.msgid.link/20251016235909.2092917-2-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dwc3 controller present on Apple Silicon SoCs like the M1 requires
a specific order of operations synchronized between its PHY and its
Type-C controller. Specifically, the PHY first has to go through initial
bringup (which requires knowledge of the lane mode and orientation)
before dwc3 itself can be brought up and can then finalize the PHY
configuration.
Additionally, dwc3 has to be teared down and re-initialized whenever
the cable is changed due to hardware quirks that prevent a new device
from being recognized and due to the PHY being unable to switch lane
mode or orientation while dwc3 is up and running.
These controllers also have a Apple-specific MMIO region after the
common dwc3 region where some controls have to be updated. PHY bringup
and shutdown also requires SUSPHY to be enabled for the ports to work
correctly.
In the future, this driver will also gain support for USB3-via-USB4
tunneling which will require additional tweaks.
Add a glue driver that takes of all of these constraints.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251015-b4-aplpe-dwc3-v2-5-cbd65a2d511a@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need fine grained control over mode switched on the DWC3 controller
present on Apple Silicon. Export core, host and gadget init and exit,
ptrcap and susphy control functions. Also introduce an additional
parameter to probe_data that allows to skip the final initialization
step that would bring up host or gadget mode.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251015-b4-aplpe-dwc3-v2-4-cbd65a2d511a@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're about to add more exported functions to be used inside glue
driver which will need more detailed documentation explaining how
they must be used. Let's also add documentation for the functions
already available.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251015-b4-aplpe-dwc3-v2-3-cbd65a2d511a@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Apple Silicon machines we can't use ioremap() / Device-nGnRE to map most
regions but must use ioremap_np() / Device-nGnRnE whenever
IORESOURCE_MEM_NONPOSTED is set. Make sure this is also done inside
dwc3_power_off_all_roothub_ports to prevent SErrors.
Fixes: 2d2a334952 ("usb: dwc3: Add workaround for host mode VBUS glitch when boot")
Cc: stable@kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251015-b4-aplpe-dwc3-v2-2-cbd65a2d511a@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_power_delivery class will now display AVS cap as
`spr_adjustable_voltage_supply`. `maximum_current_9V_to_15V` and
`maximum_current_15V_to_20V` shows the corresponding current limits
in mA. `peak_current` follows the same convention as fixed_supply
where the value reported in the capabilities message is displayed
as is.
Sample output with an SPR AVS capable PD charger:
$cat /sys/class/usb_power_delivery/pd1/source-capabilities/5:spr_adjustable_voltage_supply/maximum_current_9V_to_15V
4000mA
$cat /sys/class/usb_power_delivery/pd1/source-capabilities/5:spr_adjustable_voltage_supply/maximum_current_15V_to_20V
3350mA
$cat /sys/class/usb_power_delivery/pd1/source-capabilities/5:spr_adjustable_voltage_supply/peak_current
0
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251015043017.3382908-2-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB PD specification introduced new Adjustable Voltage Supply (AVS)
types for both Standard Power Range (SPR) and Extended Power Range (EPR)
sources.
Add definitions to correctly parse and handle the new AVS APDO. Use
bitfield macros to add inline helper functions to extract voltage,
current, power, and peak current fields to parse and log the details
of the new EPR AVS and SPR AVS APDO.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Kyle Tso <kyletso@google.com>
Reviewed-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251015043017.3382908-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use min() to improve stub_send_ret_submit(). Change the local variable
'size' from 'int' to 'unsigned int' to prevent a signedness error and to
match the resulting type.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251017091923.1694-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce new tracepoints to the USB core to improve debuggability of
USB device lifecycle events.
The following tracepoints are added:
- usb_alloc_dev: Triggered when a new USB device structure is allocated,
providing insights into early device setup.
- usb_set_device_state: Triggered when the USB device state changes,
allowing observation of the device's state transitions.
These tracepoints capture detailed information about the USB device,
including its name, speed, state, bus current value, and authorized
flag. This will aid developers in diagnosing issues related to device
enumeration within the USB subsystem.
Examples:
usb_alloc_dev: usb 1-1 speed UNKNOWN state attached 0mA [authorized]
usb_set_device_state: usb 1-1 speed UNKNOWN state powered 0mA [authorized]
usb_set_device_state: usb 1-1 speed full-speed state default 500mA [authorized]
usb_set_device_state: usb 1-1 speed full-speed state default 500mA [authorized]
usb_set_device_state: usb 1-1 speed full-speed state addressed 500mA [authorized]
usb_set_device_state: usb 1-1 speed full-speed state configured 500mA [authorized]
usb_set_device_state: usb 1-1 speed full-speed state suspended 500mA [authorized]
usb_set_device_state: usb 1-1 speed full-speed state not attached 500mA [authorized]
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20251015-usbcore-tracing-v2-2-5a14b5b9d4e0@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a new static function, update_usb_device_state(), to
centralize the process of changing a device's state, including the
management of active_duration during suspend/resume transitions.
This change prepares for adding tracepoints, allowing tracing logic to
be added in a single, central location within the new helper function.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20251015-usbcore-tracing-v2-1-5a14b5b9d4e0@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When there is no port entry in the tcpci entry itself, the driver will
trigger an error message "OF: graph: no port node found in /...../typec" .
It is documented that the dts node should contain an connector entry
with ports and several port pointing to devices with usb-role-switch
property set. Only when those connector entry is missing, it should
check for port entries in the main node.
We switch the search order for looking after ports, which will avoid the
failure message while there are explicit connector entries.
Fixes: d56de8c9a1 ("usb: typec: tcpm: try to get role switch from tcpc fwnode")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20251013-b4-ml-topic-tcpm-v2-1-63c9b2ab8a0b@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The list of Huawei LTE modules needing the quirk fixing spurious wakeups
was missing the IDs of the Huawei ME906S module, therefore suspend did not
work.
Cc: stable <stable@kernel.org>
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20251020134304.35079-1-wse@tuxedocomputers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the check on the maximum transfer length in Raw Gadget for both
control and non-control transfers.
Limiting the transfer length causes a problem with emulating USB devices
whose full configuration descriptor exceeds PAGE_SIZE in length.
Overall, there does not appear to be any reason to enforce any kind of
transfer length limit on the Raw Gadget side for either control or
non-control transfers, so let's just drop the related check.
Cc: stable <stable@kernel.org>
Fixes: f2c2e71764 ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://patch.msgid.link/a6024e8eab679043e9b8a5defdb41c4bda62f02b.1761085528.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DbC is currently only enabled back if it's in configured state during
suspend.
If system is suspended after DbC is enabled, but before the device is
properly enumerated by the host, then DbC would not be enabled back in
resume.
Always enable DbC back in resume if it's suspended in enabled,
connected, or configured state
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DbC may add 1024 bogus bytes to the beginneing of the receiving endpoint
if DbC hw triggers a STALL event before any Transfer Blocks (TRBs) for
incoming data are queued, but driver handles the event after it queued
the TRBs.
This is possible as xHCI DbC hardware may trigger spurious STALL transfer
events even if endpoint is empty. The STALL event contains a pointer
to the stalled TRB, and "remaining" untransferred data length.
As there are no TRBs queued yet the STALL event will just point to first
TRB position of the empty ring, with '0' bytes remaining untransferred.
DbC driver is polling for events, and may not handle the STALL event
before /dev/ttyDBC0 is opened and incoming data TRBs are queued.
The DbC event handler will now assume the first queued TRB (length 1024)
has stalled with '0' bytes remaining untransferred, and copies the data
This race situation can be practically mitigated by making sure the event
handler handles all pending transfer events when DbC reaches configured
state, and only then create dev/ttyDbC0, and start queueing transfers.
The event handler can this way detect the STALL events on empty rings
and discard them before any transfers are queued.
This does in practice solve the issue, but still leaves a small possible
gap for the race to trigger.
We still need a way to distinguish spurious STALLs on empty rings with '0'
bytes remaing, from actual STALL events with all bytes transmitted.
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent change to hide USB3 root hubs of USB2-only controllers broke
registration of USB2 root hubs - allow_single_roothub is set too late,
and by this time xhci_run() has already deferred root hub registration
until after the shared HCD is added, which will never happen.
This makes such controllers unusable, but testers didn't notice since
they were only bothered by warnings about empty USB3 root hubs. The bug
causes problems to other people who actually use such HCs and I was
able to confirm it on an ordinary HC by patching to ignore USB3 ports.
Setting allow_single_roothub during early setup fixes things.
Reported-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Closes: https://lore.kernel.org/linux-usb/CABpa4MA9unucCoKtSdzJyOLjHNVy+Cwgz5AnAxPkKw6vuox1Nw@mail.gmail.com/
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/linux-usb/lnb5bum7dnzkn3fc7gq6hwigslebo7o4ccflcvsc3lvdgnu7el@fvqpobbdoapl/
Fixes: 719de070f7 ("usb: xhci-pci: add support for hosts with zero USB3 ports")
Tested-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Intel USBIO driver is x86 only, other architectures have ACPI
so add an appropriate depenecy plus compile test.
Fixes: 121a0f839d ("usb: misc: Add Intel USBIO bridge driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_clk_bulk_get_all_enabled() is used in the probe, so
clk_bulk_disable_unprepare() should not be called explicitly in the remove
function.
Fixes: e0b6dc00c7 ("usb: dwc3: add generic driver to support flattened")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the differences between the LJCA client device ACPI hardware IDs,
including the USBIO IDs used for LJCA devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20251010055625.4147844-2-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver has three lists of ACPI hardware IDs, for GPIO, I²C and SPI.
Order them alphabetically.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20251010055625.4147844-1-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Where possible, use driver model logging helpers dev_*() instead of
pr_*() to ensure the messages are always associated with the
corresponding device/driver.
While at it, join the split strings to make checkpatch happy and regain
ability to grep for those log messages in the source code:
WARNING: quoted string split across lines
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20251008-vhci-hcd-cleanup-v2-2-b6acc4dd6e44@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace pr_err() calls in vhci_hcd_probe() with dev_err_probe(), to
simplify error handling a bit and improve consistency.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20251008-vhci-hcd-cleanup-v2-1-b6acc4dd6e44@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UCSI spec states that the num_connectors field is 7 bits, and the
8th bit is reserved and should be set to zero.
Some buggy FW has been known to set this bit, and it can lead to a
system not booting.
Flag that the FW is not behaving correctly, and auto-fix the value
so that the system boots correctly.
Found on Lenovo P1 G8 during Linux enablement program. The FW will
be fixed, but seemed worth addressing in case it hit platforms that
aren't officially Linux supported.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250821185319.2585023-1-mpearson-lenovo@squebb.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In cdc_parse_cdc_header(), the check for the USB_CDC_MBIM_EXTENDED_TYPE
descriptor was using 'break' upon detecting an invalid length.
This was incorrect because 'break' only exits the switch statement,
causing the code to fall through to cnt++, thus incorrectly
incrementing the count of parsed descriptors for a descriptor that was
actually invalid and being discarded.
This patch changes 'break' to 'goto next_desc;' to ensure that the
logic skips the counter increment and correctly proceeds to the next
descriptor in the buffer. This maintains an accurate count of only
the successfully parsed descriptors.
Fixes: e4c6fb7794 ("usbnet: move the CDC parser into USB core")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://lore.kernel.org/r/20250928185611.764589-1-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add layerscape dwc3 support by using flatten dwc3 core library. Layerscape
dwc3 need set gsbuscfg0-reqinfo as 0x2222 when dma-coherence set.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250929-ls_dma_coherence-v5-3-2ebee578eb7e@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add software-managed properties for the flattened model, which does not
need to use device tree properties to pass down information to the
common DWC3 core.
Add 'properties' in dwc3_probe_data and set default values for existing
users (dwc3-qcom, dwc3-generic-plat).
No functional changes.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250929-ls_dma_coherence-v5-2-2ebee578eb7e@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nothing currently stops the DisplayPort Alt Mode driver from sending
Enter Mode if the port is the Data Device. Utilize
typec_altmode_get_data_role to prevent mode entry.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250923181606.1583584-6-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alt Mode drivers are responsible for sending Enter Mode through the TCPM,
but only a DFP is allowed to send Enter Mode. typec_get_data_role gets
the port's data role, which can then be used in altmode drivers via
typec_altmode_get_data_role to know if Enter Mode should be sent.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250923181606.1583584-5-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add new imx94_usbmisc_ops for i.MX94 due to it has same wakeup logic
as i.MX95, but it doesn't need workaround for ERR051725, so pullup
is not needed.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250919071111.2558628-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now cd321x_read_data_status always returns true even if it
encounters any errors: tps6598x_read_data_status returns a boolean but
we treated it as an errno and then we have a bunch of dev_errs in case
tps6598x_block_read fails but just continue along and return true.
Fix that to correctly report errors to the callee.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-usb/aMvWJo3IkClmFoAA@stanley.mountain/
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250920-tipd-fix-v1-1-49886d4f081d@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the device working at enhanced superspeed, it needs to send function
remote wakeup signal to the host instead of device remote wakeup. Add
function wakeup support for the purpose.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250916020544.1301866-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Interrupts are disabled before entering usb_hcd_giveback_urb().
A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be
acquired with disabled interrupts.
Save the interrupt status and restore it after usb_hcd_giveback_urb().
syz reported:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
Call Trace:
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
rt_spin_lock+0xc7/0x2c0 kernel/locking/spinlock_rt.c:57
spin_lock include/linux/spinlock_rt.h:44 [inline]
mon_bus_complete drivers/usb/mon/mon_main.c:134 [inline]
mon_complete+0x5c/0x200 drivers/usb/mon/mon_main.c:147
usbmon_urb_complete include/linux/usb/hcd.h:738 [inline]
__usb_hcd_giveback_urb+0x254/0x5e0 drivers/usb/core/hcd.c:1647
vhci_urb_enqueue+0xb4f/0xe70 drivers/usb/usbip/vhci_hcd.c:818
Reported-by: syzbot+205ef33a3b636b4181fb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=205ef33a3b636b4181fb
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916014143.1439759-1-lizhi.xu@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local variable 'res' is only used to temporary store the results of
calling copy_from_user() and copy_to_user(). Use the results directly
and remove the local variable.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250918151328.331015-1-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike earlier Aspeed SoCs (AST2400/2500/2600) which are limited to
32-bit DMA addressing, the EHCI controller in AST2700 supports 64-bit
DMA. Update the EHCI platform driver to make use of this capability by
selecting a 64-bit DMA mask when the "aspeed,ast2700-ehci" compatible
is present in device tree.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250928032407.27764-3-ryan_chen@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike earlier Aspeed SoCs (AST2400/2500/2600) which are limited to
32-bit DMA addressing, the UHCI controller in AST2700 supports 64-bit
DMA. Update the platform UHCI driver to select the appropriate DMA
mask based on the device tree compatible string.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250922052045.2421480-5-ryan_chen@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some SoCs, such as the Aspeed AST2700, require the UHCI controller
to be taken out of reset before it can operate. Add optional reset
control support to the UHCI platform driver.
The driver now acquires an optional reset line from device tree,
deasserts it during probe, and asserts it again in the error path
and shutdown.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250922052045.2421480-3-ryan_chen@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It was
another normal development cycle, with lots of the usual drivers getting
updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective subsystem
maintainers, but you will get a merge conflict with the i2c tree where
new drivers were added in the same places in a Kconfig and Makefile.
The merge conflict is simple, just take both sides.
All of these have been in linux-next for a while, with the only issue
being the i2c tree merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOEo8Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynpOQCgkenJzjsGVHhl/tm447z3pQ8NtvQAn2GfxMF9
4jQlUtr6McyzCLVPOZRD
=pPei
-----END PGP SIGNATURE-----
Merge tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
-----BEGIN PGP SIGNATURE-----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=Fuey
-----END PGP SIGNATURE-----
Merge tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Added a new V4L2 clock helper
- New camera sensor drivers
- iris: Enable H.264/H.265 encoder support and fixes in iris driver
common code
- camss: add support for new SoC flavors
- venus: add new SoC support
- tc358743: support more infoframe types
- Various fixes, driver improvements and cleanups
* tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits)
media: venus: pm_helpers: add fallback for the opp-table
media: qcom: camss: vfe: Fix BPL alignment for QCM2290
media: tuner: xc5000: Fix use-after-free in xc5000_release
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
media: vsp1: Export missing vsp1_isp_free_buffer symbol
media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS()
media: renesas: ceu: Convert to RUNTIME_PM_OPS()
media: renesas: fdp1: Convert to RUNTIME_PM_OPS()
media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID
media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE
media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls
media: uvcvideo: Shorten the transfer size non compliance message
media: uvcvideo: Do not re-reference dev->udev
media: uvcvideo: Use intf instead of udev for printks
media: uvcvideo: Move video_device under video_queue
media: uvcvideo: Drop stream->mutex
media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQMQAKCRCRxhvAZXjc
omNLAQCgrwzd9sa1JTlixweu3OAxQlSEbLuMpEv7Ztm+B7Wz0AD9HtwPC44Kev03
GbMcB2DCFLC4evqYECj6IG7NBmoKsAs=
=1ICf
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add "initramfs_options" parameter to set initramfs mount options.
This allows to add specific mount options to the rootfs to e.g.,
limit the memory size
- Add RWF_NOSIGNAL flag for pwritev2()
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
signal from being raised when writing on disconnected pipes or
sockets. The flag is handled directly by the pipe filesystem and
converted to the existing MSG_NOSIGNAL flag for sockets
- Allow to pass pid namespace as procfs mount option
Ever since the introduction of pid namespaces, procfs has had very
implicit behaviour surrounding them (the pidns used by a procfs
mount is auto-selected based on the mounting process's active
pidns, and the pidns itself is basically hidden once the mount has
been constructed)
This implicit behaviour has historically meant that userspace was
required to do some special dances in order to configure the pidns
of a procfs mount as desired. Examples include:
* In order to bypass the mnt_too_revealing() check, Kubernetes
creates a procfs mount from an empty pidns so that user
namespaced containers can be nested (without this, the nested
containers would fail to mount procfs)
But this requires forking off a helper process because you cannot
just one-shot this using mount(2)
* Container runtimes in general need to fork into a container
before configuring its mounts, which can lead to security issues
in the case of shared-pidns containers (a privileged process in
the pidns can interact with your container runtime process)
While SUID_DUMP_DISABLE and user namespaces make this less of an
issue, the strict need for this due to a minor uAPI wart is kind
of unfortunate
Things would be much easier if there was a way for userspace to
just specify the pidns they want. So this pull request contains
changes to implement a new "pidns" argument which can be set
using fsconfig(2):
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
Cleanups:
- Remove the last references to EXPORT_OP_ASYNC_LOCK
- Make file_remove_privs_flags() static
- Remove redundant __GFP_NOWARN when GFP_NOWAIT is used
- Use try_cmpxchg() in start_dir_add()
- Use try_cmpxchg() in sb_init_done_wq()
- Replace offsetof() with struct_size() in ioctl_file_dedupe_range()
- Remove vfs_ioctl() export
- Replace rwlock() with spinlock in epoll code as rwlock causes
priority inversion on preempt rt kernels
- Make ns_entries in fs/proc/namespaces const
- Use a switch() statement() in init_special_inode() just like we do
in may_open()
- Use struct_size() in dir_add() in the initramfs code
- Use str_plural() in rd_load_image()
- Replace strcpy() with strscpy() in find_link()
- Rename generic_delete_inode() to inode_just_drop() and
generic_drop_inode() to inode_generic_drop()
- Remove unused arguments from fcntl_{g,s}et_rw_hint()
Fixes:
- Document @name parameter for name_contains_dotdot() helper
- Fix spelling mistake
- Always return zero from replace_fd() instead of the file descriptor
number
- Limit the size for copy_file_range() in compat mode to prevent a
signed overflow
- Fix debugfs mount options not being applied
- Verify the inode mode when loading it from disk in minixfs
- Verify the inode mode when loading it from disk in cramfs
- Don't trigger automounts with RESOLVE_NO_XDEV
If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
through automounts, but could still trigger them
- Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
tracepoints
- Fix unused variable warning in rd_load_image() on s390
- Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD
- Use ns_capable_noaudit() when determining net sysctl permissions
- Don't call path_put() under namespace semaphore in listmount() and
statmount()"
* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
fcntl: trim arguments
listmount: don't call path_put() under namespace semaphore
statmount: don't call path_put() under namespace semaphore
pid: use ns_capable_noaudit() when determining net sysctl permissions
fs: rename generic_delete_inode() and generic_drop_inode()
init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
initramfs: Replace strcpy() with strscpy() in find_link()
initrd: Use str_plural() in rd_load_image()
initramfs: Use struct_size() helper to improve dir_add()
initrd: Fix unused variable warning in rd_load_image() on s390
fs: use the switch statement in init_special_inode()
fs/proc/namespaces: make ns_entries const
filelock: add FL_RECLAIM to show_fl_flags() macro
eventpoll: Replace rwlock with spinlock
selftests/proc: add tests for new pidns APIs
procfs: add "pidns" mount option
pidns: move is-ancestor logic to helper
openat2: don't trigger automounts with RESOLVE_NO_XDEV
namei: move cross-device check to __traverse_mounts
namei: remove LOOKUP_NO_XDEV check from handle_mounts
...
The VHCI platform driver aims to forbid entering system suspend when at
least one of the virtual USB ports are bound to an active USB/IP
connection.
However, in some cases, the detection logic doesn't work reliably, i.e.
when all devices attached to the virtual root hub have been already
suspended, leading to a broken suspend state, with unrecoverable resume.
Ensure the virtually attached devices do not enter suspend by setting
the syscore PM flag. Note this is currently limited to the client side
only, since the server side doesn't implement system suspend prevention.
Fixes: 04679b3489 ("Staging: USB/IP: add client driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250902-vhci-hcd-suspend-fix-v3-1-864e4e833559@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are the USB serial updates for 6.18-rc1 consisting of some new
modem device ids and a trivial cleanup.
Everything has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaNU3ZQAKCRALxc3C7H1l
CGugAP9omygiNhS3fWhrQG8yV6u54o3qy6PV96LhilGqzX42OAEAzw7VpcaZu48z
x9NiJFKETmPx3C2gVM7bY0+B4J7xfQs=
=2IYa
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 6.18-rc1
Here are the USB serial updates for 6.18-rc1 consisting of some new
modem device ids and a trivial cleanup.
Everything has been in linux-next with no reported issues.
* tag 'usb-serial-6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add SIMCom 8230C compositions
USB: serial: oti6858: remove extranenous ; after comment
In the xHCI driver, port numbers are typically described using a one-based
index. However, tracing currently uses a zero-based index. To ensure
consistency between tracing and dynamic debugging, update the trace port
number to use a one-based index.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct the indentation in USB Port Register Set (PORTSC) tracing.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Address the naming and usage of the TR Dequeue Pointer mask in the xhci
driver. The Endpoint Context Field at offset 0x08 is defined as follows:
Bit 0 Dequeue Cycle State (DCS)
Bits 3:1 RsvdZ (Reserved and Zero)
Bits 63:4 TR Dequeue Pointer
When extracting the TR Dequeue Pointer for an Endpoint without Streams,
in xhci_handle_cmd_set_deq(), the inverted Dequeue Cycle State mask
(~EP_CTX_CYCLE_MASK) is used, inadvertently including the Reserved bits.
Although bits 3:1 are typically zero, using the incorrect mask could cause
issues.
The existing mask, named "SCTX_DEQ_MASK," is misleading because "SCTX"
implies exclusivity to Stream Contexts, whereas the TR Dequeue Pointer is
applicable to both Stream and non-Stream Contexts.
Rename the mask to "TR_DEQ_PTR_MASK", utilize GENMASK_ULL() macro and use
the mask when handling the TR Dequeue Pointer field.
Function xhci_get_hw_deq() returns the Endpoint Context Field 0x08, either
directly from the Endpoint context or a Stream.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add xhci support for PCI hosts that have zero USB3 ports.
Avoid creating a shared Host Controller Driver (HCD) when there is only
one root hub. Additionally, all references to 'xhci->shared_hcd' are now
checked before use.
Only xhci-pci.c requires modification to accommodate this change, as the
xhci core already supports configurations with zero USB3 ports. This
capability was introduced when xHCI Platform and MediaTek added support
for zero USB3 ports.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220181
Tested-by: Nick Nielsen <nick.kainielsen@free.fr>
Tested-by: grm1 <grm1@mailbox.org>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Retries are no longer gated by a quirk, so remove that part.
Add a brief explanation of the timeout.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 28a76fcc4c.
No actual HW bugs are known where Endpoint Context shows Running state
but Stop Endpoint fails repeatedly with Context State Error and leaves
the endpoint state unchanged. Stop Endpoint retries on Running EPs have
been performed since early 2021 with no such issues reported so far.
Trying to handle this hypothetical case brings a more realistic danger:
if Stop Endpoint fails on an endpoint which hasn't yet started after a
doorbell ring and enough latency occurs before this completion event is
handled, the driver may time out and begin removing cancelled TDs from
a running endpoint, even though one more retry would stop it reliably.
Such high latency is rare but not impossible, and removing TDs from a
running endpoint can cause more damage than not giving back a cancelled
URB (which wasn't happening anyway). So err on the side of caution and
revert to the old policy of always retrying if the EP appears running.
[Remove stable tag as we are dealing with theoretical cases -Mathias]
Fixes: 28a76fcc4c ("usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running")
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kuen-Han Tsai <khtsai@google.com> says:
This patch series refactors the error-handling paths in the bind()
function for f_ncm, f_acm, f_ecm, and f_rndis drivers.
The current, unified goto logic in these drivers is vulnerable to a null
pointer dereference. This is caused by the cleanup logic incorrectly
handling the stale usb_request pointer after a bind/unbind cycle. This
series fixes this issue by converting the drivers to use the modern
__free() scope-based cleanup mechanism.
Patches 1-2 are preparatory, adding the endpoint pointer to struct
usb_request and defining helpers for the __free() cleanup. The remaining
four patches use this new plumbing to refactor each driver.
Future work
-----------
1. Refactor usb_ep_free_request(), usb_ep_queue(), and usb_ep_dequeue()
functions as the ep parameter becomes redudant.
2. Convert the remaining gadget function drivers to use the new __free()
cleanup mechanism.
Link: https://lore.kernel.org/r/20250916-ready-v1-0-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After an bind/unbind cycle, the rndis->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Fixes: 45fe3b8e53 ("usb ethernet gadget: split RNDIS function")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-6-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-6-4997bf277548@google.com
After an bind/unbind cycle, the ecm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Fixes: da741b8c56 ("usb ethernet gadget: split CDC Ethernet function")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-5-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-5-4997bf277548@google.com
After an bind/unbind cycle, the acm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
gs_free_req+0x30/0x44
acm_bind+0x1b8/0x1f4
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
Fixes: 1f1ba11b64 ("usb gadget: issue notifications from ACM function")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-4-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-4-4997bf277548@google.com
After an bind/unbind cycle, the ncm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
ncm_bind+0x39c/0x3dc
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
Fixes: 9f6ce4240a ("usb: gadget: f_ncm.c added")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-3-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-3-4997bf277548@google.com
Gadget function drivers often have goto-based error handling in their
bind paths, which can be bug-prone. Refactoring these paths to use
__free() scope-based cleanup is desirable, but currently blocked.
The blocker is that usb_ep_free_request(ep, req) requires two
parameters, while the __free() mechanism can only pass a pointer to the
request itself.
Store an endpoint pointer in the struct usb_request. The pointer is
populated centrally in usb_ep_alloc_request() on every successful
allocation, making the request object self-contained.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
The USB3.2 Gen2 Host controller (a.k.a USB3HOST), IP found on the RZ/G3E
SoC is similar to R-Car XHCI, but it doesn't require any firmware.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250916150255.4231-7-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some SoCs (eg Renesas RZ/G3E SoC) have special sequence after
xhci_resume, add .post_resume_quick for it.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250916150255.4231-6-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move xhci-rcar reg definitions to a header file for the preparation of adding
support for RZ/G3E XHCI that has different register definitions.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250916150255.4231-5-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A race condition occurs when ffs_func_eps_enable() runs concurrently
with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset()
sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading
to a NULL pointer dereference when accessing epfile->ep in
ffs_func_eps_enable() after successful usb_ep_enable().
The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and
ffs_data_close() functions, and its modification is protected by the
spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function
is also protected by ffs->eps_lock.
Thus, add NULL pointer handling for ffs->epfiles in the
ffs_func_eps_enable() function to fix issues
Signed-off-by: Owen Gu <guhuinan@xiaomi.com>
Link: https://lore.kernel.org/r/20250915092907.17802-1-guhuinan@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usbmon binary interface currently truncates captures of large
transfers from higher-speed USB devices. Because a single event capture
is limited to one-fifth of the total buffer size, the current maximum
size of a captured URB is around 240 KiB. This is insufficient when
capturing traffic from modern devices that use transfers of several
hundred kilobytes or more, as truncated URBs can make it impossible for
user-space USB analysis tools like Wireshark to properly defragment and
reassemble higher-level protocol packets in the captured data.
The root cause of this issue is the 1200 KiB BUFF_MAX limit, which has
not been changed since the binary interface was introduced in 2006.
To resolve this issue, this patch increases BUFF_MAX to 64 MiB. The
original comment for BUFF_MAX based the limit's calculation on a
saturated 480 Mbit/s bus. Applying the same logic to a modern USB 3.2
Gen 2×2 20 Gbit/s bus (~2500 MB/s over a 20ms window) indicates the
buffer should be at least 50 MB. The new limit of 64 MiB covers that,
plus a little extra for any overhead.
With this change, both users and developers should now be able to debug
and reverse engineer modern USB devices even when running unmodified
distro kernels.
Please note that this change does not affect the default buffer size. A
larger buffer is only allocated when a user explicitly requests it via
the MON_IOCT_RING_SIZE ioctl, so the change to the maximum buffer size
should not unduly increase memory usage for users that don't
deliberately request a larger buffer.
Link: https://lore.kernel.org/CAO3ALPzdUkmMr0YMrODLeDSLZqNCkWcAP8NumuPHLjNJ8wC1kQ@mail.gmail.com
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/CAO3ALPxU5RzcoueC454L=WZ1qGMfAcnxm+T+p+9D8O9mcrUbCQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow autosuspend to be used by xhci plat device. For Qualcomm SoCs,
when in host mode, it is intended that the controller goes to suspend
state to save power and wait for interrupts from connected peripheral
to wake it up. This is particularly used in cases where a HID or Audio
device is connected. In such scenarios, the usb controller can enter
auto suspend and resume action after getting interrupts from the
connected device.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916120436.3617598-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ze Huang <huang.ze@linux.dev> says:
The USB 3.0 controller found in the SpacemiT K1 SoC[1] supports both
USB3.0 Host and USB2.0 Dual-Role Device (DRD).
This controller is compatible with DesignWare Core USB 3 (DWC3) driver.
However, constraints in the `snps,dwc3` bindings limit the ability to
describe hardware-specific features in a clean and maintainable way.
While `dwc3-of-simple` still serves as a glue layer for many platforms,
it requires a split device tree node structure, which is less desirable
in newer platforms.
To promote a transition toward a flattened `dwc` node structure, this
series introduces `dwc3-generic-plat`, building upon prior efforts that
exposed the DWC3 core driver [2].
The device tree support for SpacemiT K1 will be submitted separately
when the associated PHY driver is ready.
Link: https://developer.spacemit.com/documentation?token=AjHDwrW78igAAEkiHracBI9HnTb [1]
Link: https://lore.kernel.org/all/20250414-dwc3-refactor-v7-3-f015b358722d@oss.qualcomm.com [2]
Link: https://lore.kernel.org/r/20250913-dwc3_generic-v8-0-b50f81f05f95@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generic_delete_inode() is rather misleading for what the routine is
doing. inode_just_drop() should be much clearer.
The new naming is inconsistent with generic_drop_inode(), so rename that
one as well with inode_ as the suffix.
No functional changes.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
On Apple Silicon machines there is no control over which alt mode is
chosen. The CD321x' firmware negotiates the target mode on its own and
only lets the main CPU know after the mode has already been chosen.
Especially after plugging a new cable in this can result to quick mode
changes from e.g. power only -> USB3 only -> USB3+DisplayPort in a short
time. It is not possile to influence this in any way and we also do not
get direct access to the PDOs or VDOs exchanged via USB PD.
Additionally, mode changes must be tightly synchronized between DWC3 and
the Type C PHY and most mode changes require a full reset of DWC3 to
make the port work correctly.
This is all done synchronously from the role switch handler inside the
DWC3 glue driver on these machines to avoid tripping any failsafes or
watchdogs inside the Type-C PHY that may, in the worst case, reset the
entire SoC.
To be able to control all this we trigger the entire process in the
correct order directly from the TIPD driver and de-bounce any mode
changes to avoid tearing down and re-setting DWC3 back up multiple times
any time a new connection is made.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Co-developed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-11-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just like for power status we also need to keep track of data status to
be able to detect mode changes once we introduce de-bouncing for CD321x.
Read it during probe and keep a cached copy of its value.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-10-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the initial power status to be able to reliably detect connector
changes once we introduce de-bouncing for CD321x next. read_power_status
takes care of this and also forwards the status to the trace subsystem
so let's use that instead of open-coding it inside probe.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-9-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Whenever the power status is changed make sure to also update the
partner identity to be able to detect changes once de-bouncing and mode
changes are added for CD321x.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-8-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ports equipped with a CD321x are only found on Apple Silicon machines
and always support DisplayPort, Thunderbolt and USB4. Register these
port modes unconditionally.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-7-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CD321x supports various alternate modes and stores information once
these are entered into separate status registers. Read those when they
are active when reading TPS_DATA_STATUS to prepare supporting these.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-6-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're about to add more fields to struct tps6598x which are only relevant
for Apple's CD321x and to ensure that we don't waste memory everywhere for
those add a separate struct for cd321x and prepare to allocate more space
inside probe.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-5-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some bits inside the CD321x TPS_DATA_STATUS register have a different
function compared to the original tipd chip. Add these and introduce a
separate trace function to show them correctly.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-4-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When support for CD321x was originally added no other hardware variant
was supported and there was no need for struct tipd_data. Now that it
exists move the special case in there so that we can drop the
of_device_is_compatible_check entirely.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-3-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the irq mask was originally added more tipd variants have been
introduced and there's now struct tipd_data. Move the initial mask in
there.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-2-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now the interrupt handler first reads all updated status registers
and only then clears the interrupts. It's possible that a duplicate
interrupt for a changed register or plug state comes in after the
interrupts have been processed but before they have been cleared:
* plug is inserted, TPS_REG_INT_PLUG_EVENT is set
* TPS_REG_INT_EVENT1 is read
* tps6598x_handle_plug_event() has run and registered the plug
* plug is removed again, TPS_REG_INT_PLUG_EVENT is set (again)
* TPS_REG_INT_CLEAR1 is written, TPS_REG_INT_PLUG_EVENT is cleared
We then have no plug connected and no pending interrupt but the tipd
core still thinks there is a plug. It's possible to trigger this with
e.g. a slightly broken Type-C to USB A converter.
Fix this by first clearing the interrupts and only then reading the
updated registers.
Fixes: 45188f27b3 ("usb: typec: tipd: Add support for Apple CD321X")
Fixes: 0a4c005bd1 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Cc: stable@kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-1-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guan-Yu Lin <guanyulin@google.com> says:
Wesley Cheng and Mathias Nyman's USB offload design enables a
co-processor to handle some USB transfers, potentially allowing the
system to sleep (suspend-to-RAM) and save power. However, Linux's System
Sleep model halts the USB host controller when the main system isn't
managing any USB transfers. To address this, the proposal modifies the
system to recognize offloaded USB transfers and manage power
accordingly. This way, offloaded USB transfers could still happen during
system sleep (Suspend-to-RAM).
This involves two key steps:
1. Transfer Status Tracking: Propose offload_usage and corresponding
apis drivers could track USB transfers on the co-processor, ensuring
the system is aware of any ongoing activity.
2. Power Management Adjustment: Modifications to the USB driver stack
(xhci host controller driver, and USB device drivers) allow the
system to sleep (Suspend-to-RAM) without disrupting co-processor
managed USB transfers. This involves adding conditional checks to
bypass some power management operations in the System Sleep model.
Link: https://lore.kernel.org/r/20250911142051.90822-1-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sharing a USB controller with another entity via xhci-sideband driver
creates power management complexities. To prevent the USB controller
from being inadvertently deactivated while in use by the other entity, a
usage-count based mechanism is implemented. This allows the system to
manage power effectively, ensuring the controller remains available
whenever needed.
In order to maintain full functionality of an offloaded USB devices,
several changes are made within the suspend flow of such devices:
- skip usb_suspend_device() so that the port/hub are still active for
USB transfers via offloaded path.
- not suspending the endpoints which are used by USB interfaces marked
with needs_remote_wakeup. Namely, skip usb_suspend_interface() and
usb_hcd_flush_endpoint() on associated USB interfaces. This reserves a
pending interrupt urb during system suspend for handling the interrupt
transfer, which is necessary since remote wakeup doesn't apply in the
offloaded USB devices when controller is still active.
- not flushing the endpoints of actively offloaded USB devices. Given
that the USB devices is used by another entity, unilaterally flush the
endpoint might lead to unexpected behavior on another entity.
- not suspending the xhci controller. This is done by skipping the
suspend/resume callbacks in the xhci platform driver.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-5-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-5-guanyulin@google.com
The existing sideband driver only registers sidebands without tracking
their active usage. To address this, sideband will now record its active
usage when it creates/removes interrupters. In addition, a new api is
introduced to provide a means for other dirvers to fetch sideband
activity information on a USB host controller.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-4-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-4-guanyulin@google.com
Introduce offload_usage and corresponding apis to track offload usage
on each USB device. Offload denotes that there is another co-processor
accessing the USB device via the same USB host controller. To optimize
power usage, it's essential to monitor whether the USB device is
actively used by other co-processor. This information is vital when
determining if a USB device can be safely suspended during system power
state transitions.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-3-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-3-guanyulin@google.com
Add a driver for the Intel USBIO USB IO-expander used by the MIPI cameras
on various new (Meteor Lake and later) Intel laptops.
This is an USB bridge driver which adds auxbus child devices for the GPIO,
I2C and SPI functions of the USBIO chip and which exports IO-functions for
the drivers for the auxbus child devices to communicate with the USBIO
device's firmware.
Co-developed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com>
Link: https://lore.kernel.org/r/20250911181343.77398-2-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Qualcomm DWC3 dual-role controllers, the conndone/disconnect events in
device mode are generated by controller when software writes to QSCRATCH
registers in Qualcomm Glue layer rather than the vbus line being routed to
dwc3 core IP for it to recognize and generate these events.
UTMI_OTG_VBUS_VALID bit of QSCRATCH_HS_PHY_CTRL register needs to be set
to generate a connection done event and to be cleared for the controller to
generate a disconnect event during cable removal. When the disconnect is
not generated upon cable removal, the "connected" flag of dwc3 is left
marked as "true" and it blocks suspend routines and for that to happen upon
cable removal, the cable disconnect notification coming in via set_role
call need to be provided to the Qualcomm glue layer as well.
Currently, the way DWC3 core and Qualcomm legacy glue driver are designed,
there is no mechanism through which the DWC3 core can notify the Qualcomm
glue layer of any role changes which it receives via role switch. To
register these glue callbacks at probe time, for enabling core to notify
glue layer, the legacy Qualcomm driver has no way to find out when the
child driver probe was successful since it does not check for the same
during of_platform_populate.
Hence implement the following glue callbacks for flattened Qualcomm glue
driver:
1. set_role: To pass role switching information from drd layer to glue.
This information is needed to identify NONE/DEVICE mode switch and modify
QSCRATCH to generate connect-done event on device mode entry and disconnect
event on cable removal in device mode.
2. run_stop: When booting up in device mode, if autouspend is enabled and
userspace doesn't write UDC on boot, controller enters autosuspend. After
this, if the userspace writes to UDC in the future, run_stop notifier is
required to enable UTMI_OTG_VBUS_VALID of QSCRATCH so that connect done
event is generated after run_stop(1) is done to finish enumeration.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250907181412.2174616-3-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In certain situations like role switching, the glue layers need to be
informed of these events, so that they can take any necessary action.
But in non-flattened implementations, the glue drivers have no data on
when the core driver probe was successful post invoking of_platform_
populate. Now that the core driver supports flattened implementations
as well, introduce vendor callbacks that can be passed on from glue to
core before invoking dwc3_core_probe.
Introduce callbacks to notify glue layer of role_switch and run_stop
changes. These can be used by flattened implementation of Qualcomm
glue layer to generate connect/disconnect events in controller during
cable connect and run stop modifications by udc in device mode.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250907181412.2174616-2-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the system is suspended, USB hot-plugging/unplugging can trigger
wake events of the Tegra USB host controller.
Enable support for USB wake-up events by parsing device-tree to see if
the interrupts for the wake-up events are present and if so configure
those interrupts. Note that if wake-up events are not present, still
allow the USB host controller to probe as normal.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Link: https://lore.kernel.org/r/20250811074558.1062048-5-haotienh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While the userspace program can be notified of gadget state changes,
timing issue can lead to missed transitions when reading the state
value.
Introduce a trace event for usb_gadget_set_state to reliably track state
transitions.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250818082722.2952867-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DWC2 IP can be properly integrated in a SoC to work at high-speed
USB speed but some board issues, EMC constraints or any other reasons
can lead to the need to limit this USB speed at board level.
The device-tree 'maximum-speed' property already exists for this purpose
but is not handled by the DWC2 driver.
Fill this lack adding support for 'maximum-speed' property and so allow
to limit the USB speed in device-tree (board description).
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20250910160730.585303-1-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add wakeup support for tcpci. If the user enables the wakeup file, call
enable_irq_wake() during system suspend and disable_irq_wake() during
system resume. Since this driver supports shared interrupts, mask the
chip interrupt by default when wakeup is disabled to avoid affecting
other IRQ users.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250910105042.695146-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some new modem device ids.
Everything has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaMPXVAAKCRALxc3C7H1l
CIToAQDoULIp/C7gzVUPgHpIeMGPHspAsVqjZ5TDO0Bhc6oM4QEAtpsmzbiZ76xh
jxTtlUiCmVedSTu/OMRTXW2Xz/CRgAU=
=U3Rs
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.17-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial device ids for 6.17-rc6
Here are some new modem device ids.
Everything has been in linux-next with no reported issues.
* tag 'usb-serial-6.17-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit Cinterion LE910C4-WWX new compositions
USB: serial: option: add Telit Cinterion FN990A w/audio compositions
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://lore.kernel.org/r/20250902132613.84876-1-liaoyuanhong@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The EP-IN of MIDI2 (altset 1) wasn't initialized in
f_midi2_create_usb_configs() as it's an INT EP unlike others BULK
EPs. But this leaves rather the max packet size unchanged no matter
which speed is used, resulting in the very slow access.
And the wMaxPacketSize values set there look legit for INT EPs, so
let's initialize the MIDI2 EP-IN there for achieving the equivalent
speed as well.
Fixes: 8b645922b2 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250905133240.20966-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gadget card driver forgot to call snd_ump_update_group_attrs()
after adding FBs, and this leaves the UMP group attributes
uninitialized. As a result, -ENODEV error is returned at opening a
legacy rawmidi device as an inactive group.
This patch adds the missing call to address the behavior above.
Fixes: 8b645922b2 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250904153932.13589-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcpm_handle_vdm_request delivers messages to the partner altmode or the
cable altmode depending on the SVDM response type, which is incorrect.
The partner or cable should be chosen based on the received message type
instead.
Also add this filter to ADEV_NOTIFY_USB_AND_QUEUE_VDM, which is used when
the Enter Mode command is responded to by a NAK on SOP or SOP' and when
the Exit Mode command is responded to by an ACK on SOP.
Fixes: 7e7877c55e ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250821203759.1720841-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yunseong Kim and the syzbot fuzzer both reported a problem in
RT-enabled kernels caused by the way dummy-hcd mixes interrupt
management and spin-locking. The pattern was:
local_irq_save(flags);
spin_lock(&dum->lock);
...
spin_unlock(&dum->lock);
... // calls usb_gadget_giveback_request()
local_irq_restore(flags);
The code was written this way because usb_gadget_giveback_request()
needs to be called with interrupts disabled and the private lock not
held.
While this pattern works fine in non-RT kernels, it's not good when RT
is enabled. RT kernels handle spinlocks much like mutexes; in particular,
spin_lock() may sleep. But sleeping is not allowed while local
interrupts are disabled.
To fix the problem, rewrite the code to conform to the pattern used
elsewhere in dummy-hcd and other UDC drivers:
spin_lock_irqsave(&dum->lock, flags);
...
spin_unlock(&dum->lock);
usb_gadget_giveback_request(...);
spin_lock(&dum->lock);
...
spin_unlock_irqrestore(&dum->lock, flags);
This approach satisfies the RT requirements.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Fixes: b4dbda1a22 ("USB: dummy-hcd: disable interrupts during req->complete")
Reported-by: Yunseong Kim <ysk@kzalloc.com>
Closes: <https://lore.kernel.org/linux-usb/5b337389-73b9-4ee4-a83e-7e82bf5af87a@kzalloc.com/>
Reported-by: syzbot+8baacc4139f12fa77909@syzkaller.appspotmail.com
Closes: <https://lore.kernel.org/linux-usb/68ac2411.050a0220.37038e.0087.GAE@google.com/>
Tested-by: syzbot+8baacc4139f12fa77909@syzkaller.appspotmail.com
CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
CC: stable@vger.kernel.org
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/bb192ae2-4eee-48ee-981f-3efdbbd0d8f0@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suspend-resume cycle test revealed a memory leak in 6.17-rc3
Turns out the slot_id race fix changes accidentally ends up calling
xhci_free_virt_device() with an incorrect vdev parameter.
The vdev variable was reused for temporary purposes right before calling
xhci_free_virt_device().
Fix this by passing the correct vdev parameter.
The slot_id race fix that caused this regression was targeted for stable,
so this needs to be applied there as well.
Fixes: 2eb0337615 ("usb: xhci: Fix slot_id resource race conflict")
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/linux-usb/20250829181354.4450-1-00107082@163.com
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Suggested-by: David Wang <00107082@163.com>
Cc: stable@vger.kernel.org
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pending requests will be flushed on disconnect, and the corresponding
TRBs will be turned into No-op TRBs, which are ignored by the xHC
controller once it starts processing the ring.
If the USB debug cable repeatedly disconnects before ring is started
then the ring will eventually be filled with No-op TRBs.
No new transfers can be queued when the ring is full, and driver will
print the following error message:
"xhci_hcd 0000:00:14.0: failed to queue trbs"
This is a normal case for 'in' transfers where TRBs are always enqueued
in advance, ready to take on incoming data. If no data arrives, and
device is disconnected, then ring dequeue will remain at beginning of
the ring while enqueue points to first free TRB after last cancelled
No-op TRB.
s
Solve this by reinitializing the rings when the debug cable disconnects
and DbC is leaving the configured state.
Clear the whole ring buffer and set enqueue and dequeue to the beginning
of ring, and set cycle bit to its initial state.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Decouple allocation of endpoint ring buffer from initialization
of the buffer, and initialization of endpoint context parts from
from the rest of the contexts.
It allows driver to clear up and reinitialize endpoint rings
after disconnect without reallocating everything.
This is a prerequisite for the next patch that prevents the transfer
ring from filling up with cancelled (no-op) TRBs if a debug cable is
reconnected several times without transferring anything.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sakari Ailus <sakari.ailus@linux.intel.com> says:
This series enables support for eUSB2 Double Isochronous IN Bandwidth UVC
devices specified in 'USB 2.0 Double Isochronous IN Bandwidth' ECN. In
short, it adds support for new integrated USB2 webcams that can send twice
the data compared to conventional USB2 webcams.
These devices are identified by the device descriptor bcdUSB 0x0220 value.
They have an additional eUSB2 Isochronous Endpoint Companion Descriptor,
and a zero max packet size in regular isoc endpoint descriptor. Support
for parsing that new descriptor was added in commit
c749f058b4 ("USB: core: Add eUSB2 descriptor and parsing in USB core")
This series adds support to UVC, USB core, and xHCI to identify eUSB2
double isoc devices, and allow and set proper max packet, iso frame desc
sizes, bytes per interval, and other values in URBs and xHCI endpoint
contexts needed to support the double data rates for eUSB2 double isoc
devices.
since v4:
https://lore.kernel.org/linux-usb/20250812132445.3185026-1-sakari.ailus@linux.intel.com
- New patch: use le16_to_cpu() to access endpoint descriptor's
wMaxPacketSize field, which is an __le16. This isn't a bugfix as the
value was compared to 0.
- New patch: add USB device speed check for eUSB2 isochronous endpoint
companion parsing. The check is then removed from sites checking the
existence of the companion (through companion's bDescriptorType field,
which is non-zero for valid descriptors).
- New patch: do not parse eUSB2 isoc double BW companion descriptor on
interrupt or OUT endpoints. It is not supposed to be found there,
according to the ECN.
- Rename usb_endpoint_max_isoc_bpi() as
usb_endpoint_max_periodic_payload() and move it right after
usb_maxpacket().
- Fixed @ep reference in kernel-doc documentation for
usb_endpoint_max_periodic_payload().
- In usb_endpoint_max_periodic_payload(), call struct usb_device pointer
argument "udev" instead of "dev", to align with naming elsewhere.
- Add support for interrupt endpoints in
usb_endpoint_max_periodic_payload(); eUSB2 double isoc BW is still
limited to isochronous endpoints though.
- In usb_endpoint_max_periodic_payload(), remove the separate case for
USB_SPEED_HIGH as the check is already done in parsing the eUSB isoc
double BW companion, which is checked for.
- New patch: use usb_endpoint_max_periodic_payload() in xHCI driver,
replacing xhci_get_max_esit_payload().
- Check non-zero bDescriptorType field of ep->eusb2_isoc_ep_comp instead
of dwBytesPerInterval value exceeding 3072, where
xhci_eusb2_is_isoc_bw_double() was used. This aligns the checks of eUSB2
isochronous double bandwidth support for an endpoint.
- New patch: introduce usb_endpoint_is_hs_isoc_double() to figure out
whether an endpoint uses isochronous double bandwidth and use the
function in the xHCI driver and the usb core.
xhci_eusb2_is_isoc_bw_double() is dropped, as well as the
MAX_ISOC_XFER_SIZE_HS macro. usb_endpoint_is_hs_isoc_double() also
includes check for bcdUSB == 0x220, to anticipate adding support for
eUSB2V2.
- Merge condition for checking eUSB2 isoc double bw support for
xHCI/endpoint in xhci_get_endpoint_mult().
- Improve comment regarding maximum packet size bits 12:11 in
xhci_get_endpoint_max_burst().
- Aligned subject prefixes with the recent patches to the same files.
since v3:
https://lore.kernel.org/linux-usb/20250807055355.1257029-1-sakari.ailus@linux.intel.com/
- Use spaces in aligning macro body for HCC2_EUSB2_DIC() (1st patch).
- Move usb_endpoint_max_isoc_bpi() to drivers/usb/core/usb.c (3rd patch).
since v2:
https://lore.kernel.org/linux-usb/20250711083413.1552423-1-sakari.ailus@linux.intel.com
- Use ep->eusb2_isoc_ep_comp.bDescriptorType to determined whether the
eUSB2 isochronous endpoint companion descriptor exists.
- Clean up eUSB2 double isoc bw maxp calculation.
- Drop le16_to_cpu(udev->descriptor.bcdUSB) == 0x220 check from
xhci_eusb2_is_isoc_bw_double() -- it's redundant as
ep->eusb2_isoc_ep_comp.dwBytesPerInterval will be zero otherwise.
- Add kernel-doc documentation for usb_endpoint_max_isoc_bpi().
- Check the endpoint has IN direction in usb_endpoint_max_isoc_bpi() and
usb_submit_urb() as a condition for eUSB2 isoc double bw.
since v1:
https://lore.kernel.org/linux-usb/20250616093730.2569328-2-mathias.nyman@linux.intel.com
- Introduce uvc_endpoint_max_isoc_bpi() to obtain maximum bytes per
interval value for an endpoint, in a new patch (3rd). This code has been
slightly reworked from the instance in the UVC driver, including support
for SuperSpeedPlus Isochronous Endpoint Companion.
- Use usb_endpoint_max_isoc_bpi() in the UVC driver instead of open-coding
eUSB2 support there, also drop now-redundant uvc_endpoint_max_bpi().
- Use u32 for maximum bpi and related information in the UVC driver -- the
value could be larger than a 16-bit type can hold.
- Assume max in usb_submit_urb() is a natural number as
usb_endpoint_maxp() returns only natural numbers (2nd patch).
Link: https://lore.kernel.org/r/20250820143824.551777-1-sakari.ailus@linux.intel.com
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
eUSB2 double isochronous in bandwidth devices support up to 6 transactions
per microframe, and thus doubles the total bytes possible to receive per
microframe.
Support larger URB isoc frame sizes for eUSB2 double isoc in endpoints.
Also usb_endpoint_maxp() returns a natural number so there's no need to
assume it could be < 0.
Signed-off-by: Rai, Amardeep <amardeep.rai@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-9-sakari.ailus@linux.intel.com
Detect eUSB2 double isoc bw capable hosts and devices, and set the proper
xhci endpoint context values such as 'Mult', 'Max Burst Size', and 'Max
ESIT Payload' to enable the double isochronous bandwidth endpoints.
Intel xHC uses the endpoint context 'Mult' field for eUSB2 isoc
endpoints even if hosts supporting Large ESIT Payload Capability should
normally ignore the mult field.
Signed-off-by: Rai, Amardeep <amardeep.rai@intel.com>
Co-developed-by: Kannappan R <r.kannappan@intel.com>
Signed-off-by: Kannappan R <r.kannappan@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Co-developed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-8-sakari.ailus@linux.intel.com
Use the newly added usb_endpoint_max_periodic_payload() to obtain the
maximum number of bytes to transfer during a service interval for
isochronous and interrupt endpoints. This will replace the xhci-specific
xhci_get_max_esit_payload() which is removed as redundant.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-6-sakari.ailus@linux.intel.com
Add usb_endpoint_max_periodic_payload() to obtain maximum payload bytes in
a service interval for isochronous and interrupt endpoints in a USB
version independent way.
Signed-off-by: Rai, Amardeep <amardeep.rai@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-5-sakari.ailus@linux.intel.com
The eUSB2 isochronous double bandwidth endpoint descriptor is allowed for
the isochronous IN endpoints, according to the ECN. Do not parse these
descriptors if they are found in interrupt or OUT endpoints.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-4-sakari.ailus@linux.intel.com
Check that a device is a high-speed one before proceeding to parse the
eUSB2 isochronous endpoint companion descriptors.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-3-sakari.ailus@linux.intel.com
wMaxPacketSize field in struct usb_endpoint_descriptor is an __le16, use
le16_to_cpu() to read it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-2-sakari.ailus@linux.intel.com
"Power Reading" bit is introduced in UCSI v2.1 and so limit the
check for that bit only if version supported is 2.1 or above.
Fixes: c851b71fd6 ("usb: typec: ucsi: Add support for READ_POWER_LEVEL command")
Signed-off-by: Venkat Jayaraman <venkat.jayaraman@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250905184401.3222530-1-venkat.jayaraman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the __cdnsp_gadget_init() and cdnsp_gadget_exit() functions, the gadget
structure (pdev->gadget) was freed before its endpoints.
The endpoints are linked via the ep_list in the gadget structure.
Freeing the gadget first leaves dangling pointers in the endpoint list.
When the endpoints are subsequently freed, this results in a use-after-free.
Fix:
By separating the usb_del_gadget_udc() operation into distinct "del" and
"put" steps, cdnsp_gadget_free_endpoints() can be executed prior to the
final release of the gadget structure with usb_put_gadget().
A patch similar to bb9c74a5bd14("usb: dwc3: gadget: Free gadget structure
only after freeing endpoints").
Signed-off-by: Chen Yufeng <chenyufeng@iie.ac.cn>
Link: https://lore.kernel.org/r/20250905094842.1232-1-chenyufeng@iie.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cdnsp-pci driver uses pcim_enable_device() to enable a PCI device,
which means the device will be automatically disabled on driver detach
through the managed device framework. The manual pci_disable_device()
call in the error path is therefore redundant.
Found via static anlaysis and this is similar to commit 99ca0b57e4
("thermal: intel: int340x: processor: Fix warning during module unload").
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250903141613.2535472-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://lore.kernel.org/r/20250902132720.85504-1-liaoyuanhong@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tracepoints that are defined take up around 5K each, even if they are not
used. If they are defined and not used, then they waste memory for unused
code. Soon unused tracepoints will cause warnings.
Remove the unused tracepoints of the cdnsp subsystem. They are:
cdnsp_defered_event
cdnsp_ep0_halted
cdnsp_free_priv_device
cdnsp_handle_cmd_flush_ep
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250829015650.224063821@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tracepoints that are defined take up around 5K each, even if they are not
used. If they are defined and not used, then they waste memory for unused
code. Soon unused tracepoints will cause warnings.
Remove the unused tracepoints of the cdns3 subsystem. They are:
cdns3_mapped_request
cdns3_map_request
cdns3_stream_transfer_split
cdns3_stream_transfer_split_next_part
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250829015650.053498355@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tracepoints that are defined take up around 5K each, even if they are not
used. If they are defined and not used, then they waste memory for unused
code. Soon unused tracepoints will cause warnings.
Remove the unused tracepoints of the cdns2 subsystem. They are:
cdns2_ep0_enqueue
cdns2_ep0_set_config
cdns2_ep_queue
cdns2_iso_out_ep_disable
cdns2_lpm
cdns2_mapped_request
cdns2_map_request
cdns2_may_wakeup
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20250829015649.885512884@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the usb251xb assumes i2c control. But from HW point of
view, the hub supports usage case without any i2c, we only want the
gpio controls.
Refactor the code so that register writes for configuration are only
performed if the device has a i2c_client provided and also register as
a platform driver. This allows the driver to be used to manage GPIO
based control of the device.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20250825234509.1041-4-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://lore.kernel.org/r/20250825234509.1041-3-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samsung S3C24xx family of SoCs was removed the Linux kernel in the
commit 61b7f8920b ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of remaining S3C24xx compatibles.
The driver (named s3c2410) is still being used via platform code for
S3C64xx platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250831122222.50332-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the hid req->zero flag of ep0/in_ep to true by default,
then the UDC drivers can transfer a zero length packet at
the end if the hid transfer with size divisible to EPs max
packet size according to the USB 2.0 spec.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Link: https://lore.kernel.org/r/1756204087-26111-1-git-send-email-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Once the use_os_string flag is set to true for some functions
(e.g. adb/mtp) which need to response the OS string, and then
if we re-bind the ConfigFS gadget to use the other functions
(e.g. hid) which should not to response the OS string, however,
because the use_os_string flag is still true, so the usb gadget
response the OS string descriptor incorrectly, this can cause
the USB device to be unrecognizable on the Windows system.
An example of this as follows:
echo 1 > os_desc/use
ln -s functions/ffs.adb configs/b.1/function0
start adbd
echo "<udc device>" > UDC #succeed
stop adbd
rm configs/b.1/function0
echo 0 > os_desc/use
ln -s functions/hid.gs0 configs/b.1/function0
echo "<udc device>" > UDC #fail to connect on Windows
This patch sets the use_os_string flag to false at bind if
the functions not support OS Descriptors.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Fixes: 87213d388e ("usb: gadget: configfs: OS String support")
Link: https://lore.kernel.org/r/1755833769-25434-1-git-send-email-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vbus IRQ is optional, so no error message should be printed if it is
not available.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250825124901.2190539-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use dwc3_mode_string as the single source of truth for mode-to-string
conversion.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250822092411.173519-2-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes to the port capability can be indirectly observed by tracing
register writes to DWC3_GCTL. However, this requires interpreting the
raw value, which is neither intuitive nor precise for debugging.
Monitoring these mode changes is essential for resolving issues related
to USB role switching and enumeration.
Introduce a dedicated trace event to provide a human-readable log when
the port capability is configured.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250822092411.173519-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the twl6030_usb_probe(), the variable ret is declared as
a u32 type. However, since ret may receive -ENODEV when accepting
the return value of omap_usb2_set_comparator().Therefore, its type
should be changed to int.
Fixes: 0e98de67ba ("usb: otg: make twl6030_usb as a comparator driver to omap_usb2")
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/r/20250822092224.30645-1-zhao.xichao@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify the calculation of 'residue' in rts51x_bulk_transport() and
avoid unnecessarily reassigning 'residue' to itself.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250828162623.4840-3-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use min_t() to improve usblp_read() and avoid calculating
'avail - usblp->readcount' twice. Use min_t(ssize_t,,) instead of min()
to avoid a signedness error.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250829173713.56222-1-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a redundant semicolon after a comment, remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just
return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://lore.kernel.org/r/20250819112451.587817-1-zhao.xichao@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Partially revert commit e1db856bd2 ("usb: xhci: remove '0' write to
write-1-to-clear register") because the patch cleared the Interrupt Pending
bit during interrupt enabling and disabling. The Interrupt Pending bit
should only be cleared when the driver has handled the interrupt.
Ideally, all interrupts should be handled before disabling the interrupt;
consequently, no interrupt should be pending when enabling the interrupt.
For this reason, keep the debug message informing if an interrupt is still
pending when an interrupt is disabled.
Because the Interrupt Pending bit is write-1-to-clear, writing '0' to it
ensures that the state does not change.
Link: https://lore.kernel.org/linux-usb/20250818231103.672ec7ed@foxbook
Fixes: e1db856bd2 ("usb: xhci: remove '0' write to write-1-to-clear register")
Closes: https://bbs.archlinux.org/viewtopic.php?id=307641
cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250819125844.2042452-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xHC controller may immediately reuse a slot_id after it's disabled,
giving it to a new enumerating device before the xhci driver freed
all resources related to the disabled device.
In such a scenario, device-A with slot_id equal to 1 is disconnecting
while device-B is enumerating, device-B will fail to enumerate in the
follow sequence.
1.[device-A] send disable slot command
2.[device-B] send enable slot command
3.[device-A] disable slot command completed and wakeup waiting thread
4.[device-B] enable slot command completed with slot_id equal to 1 and
wakeup waiting thread
5.[device-B] driver checks that slot_id is still in use (by device-A) in
xhci_alloc_virt_device, and fail to enumerate due to this
conflict
6.[device-A] xhci->devs[slot_id] set to NULL in xhci_free_virt_device
To fix driver's slot_id resources conflict, clear xhci->devs[slot_id] and
xhci->dcbba->dev_context_ptrs[slot_id] pointers in the interrupt context
when disable slot command completes successfully. Simultaneously, adjust
function xhci_free_virt_device to accurately handle device release.
[minor smatch warning and commit message fix -Mathias]
Cc: stable@vger.kernel.org
Fixes: 7faac1953e ("xhci: avoid race between disable slot command and host runtime suspend")
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250819125844.2042452-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fusb302 irq handler has been carefully optimized by Hans de Goede in
commit 207338ec5a ("usb: typec: fusb302: Improve suspend/resume
handling"). A recent 'fix' undid most of that work to avoid a virtio-gpio
driver bug.
This reverts the incorrect fix, since it is of very low quality. It
reverts the quirks from Hans change (and thus reintroduces the problems
fixed by Hans) while keeping the overhead from the original change.
The proper fix to support using fusb302 with an interrupt line provided
by virtio-gpio must be implemented in the virtio driver instead, which
should support disabling the IRQ from the fusb302 interrupt routine.
Cc: Hans de Goede <hansg@kernel.org>
Cc: Yongbo Zhang <giraffesnn123@gmail.com>
Fixes: 1c2d81bded ("usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250818-fusb302-unthreaded-irq-v1-1-3a9a11a9f56f@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kerneldoc added for usb_hcd_giveback_urb() by commit 41631d3616
("usb: core: Replace in_interrupt() in comments") is unclear and
incorrect. Update the text for greater clarity and to say that URBs
for a root hub will always use a BH context for their completion.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/41eaae05-116a-4568-940c-eeb94ab6baa0@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fix is already present in f_ecm.c and was never
propagated to f_ncm.c
When creating multiple NCM ethernet devices
on a composite usb gadget device
each MAC address on the HOST side will be identical.
Having the same MAC on different network interfaces is bad.
This fix updates the MAC address inside the
ncm_strings_defs global during the ncm_bind call.
This ensures each device has a unique MAC.
In f_ecm.c ecm_string_defs is updated in the same way.
The defunct MAC assignment in ncm_alloc has been removed.
Signed-off-by: raub camaioni <raubcameo@gmail.com>
Link: https://lore.kernel.org/r/20250815131358.1047525-1-raubcameo@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pm_runtime_resume_and_get() always returns a negative error code or zero;
there's no need to check for positive values such as returned by
pm_runtime_get_sync(). Simply drop the check.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250815113121.925641-1-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for UCSI READ_POWER_LEVEL command as per
UCSI specification v2.1 and above to debugfs.
Following power related fields will be exposed as files in debugfs:-
peak_current (Peak current),
avg_current (Average current) and
vbus_voltage (VBUS voltage)
These files will be updated either when a READ_POWER_LEVEL
command is sent from OS or when a device is connected.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Venkat Jayaraman <venkat.jayaraman@intel.com>
Link: https://lore.kernel.org/r/20250814163028.18058-1-venkat.jayaraman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Presently in `max_contaminant_is_contaminant()` if there's no
contaminant detected previously, CC is open & stopped toggling and no
contaminant is currently present, TCPC.RC would be programmed to do DRP
toggling. However, it didn't actively look for a connection. This would
lead to Type-C not detect *any* new connections. Hence, in the above
situation, re-enable toggling & program TCPC to look for a new
connection.
Also, return early if TCPC was looking for connection as this indicates
TCPC has neither detected a potential connection nor a change in
contaminant state.
In addition, once dry detection is complete (port is dry), restart
toggling.
Fixes: 02b332a063 ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250815-fix-upstream-contaminant-v2-2-6c8d6c3adafb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Low power mode is enabled when reading CC resistance as part of
`max_contaminant_read_resistance_kohm()` and left in that state.
However, it's supposed to work with 1uA current source. To read CC
comparator values current source is changed to 80uA. This causes a storm
of CC interrupts as it (falsely) detects a potential contaminant. To
prevent this, disable low power mode current sourcing before reading
comparator values.
Fixes: 02b332a063 ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Rule: add
Link: https://lore.kernel.org/stable/20250814-fix-upstream-contaminant-v1-1-801ce8089031%40google.com
Link: https://lore.kernel.org/r/20250815-fix-upstream-contaminant-v2-1-6c8d6c3adafb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit addresses a rarely observed endpoint command timeout
which causes kernel panic due to warn when 'panic_on_warn' is enabled
and unnecessary call trace prints when 'panic_on_warn' is disabled.
It is seen during fast software-controlled connect/disconnect testcases.
The following is one such endpoint command timeout that we observed:
1. Connect
=======
->dwc3_thread_interrupt
->dwc3_ep0_interrupt
->configfs_composite_setup
->composite_setup
->usb_ep_queue
->dwc3_gadget_ep0_queue
->__dwc3_gadget_ep0_queue
->__dwc3_ep0_do_control_data
->dwc3_send_gadget_ep_cmd
2. Disconnect
==========
->dwc3_thread_interrupt
->dwc3_gadget_disconnect_interrupt
->dwc3_ep0_reset_state
->dwc3_ep0_end_control_data
->dwc3_send_gadget_ep_cmd
In the issue scenario, in Exynos platforms, we observed that control
transfers for the previous connect have not yet been completed and end
transfer command sent as a part of the disconnect sequence and
processing of USB_ENDPOINT_HALT feature request from the host timeout.
This maybe an expected scenario since the controller is processing EP
commands sent as a part of the previous connect. It maybe better to
remove WARN_ON in all places where device endpoint commands are sent to
avoid unnecessary kernel panic due to warn.
Cc: stable <stable@kernel.org>
Co-developed-by: Akash M <akash.m5@samsung.com>
Signed-off-by: Akash M <akash.m5@samsung.com>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250808125315.1607-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many Realtek USB Wi-Fi dongles released in recent years have two modes:
one is driver CD mode which has Windows driver onboard, another one is
Wi-Fi mode. Add the US_FL_IGNORE_DEVICE quirk for these multi-mode devices.
Otherwise, usb_modeswitch may fail to switch them to Wi-Fi mode.
Currently there are only two USB IDs known to be used by these multi-mode
Wi-Fi dongles: 0bda:1a2b and 0bda:a192.
Information about Mercury MW310UH in /sys/kernel/debug/usb/devices.
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 12 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=a192 Rev= 2.00
S: Manufacturer=Realtek
S: Product=DISK
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Information about D-Link AX9U rev. A1 in /sys/kernel/debug/usb/devices.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 55 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=1a2b Rev= 0.00
S: Manufacturer=Realtek
S: Product=DISK
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable <stable@kernel.org>
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250813162415.2630-1-zenmchen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since 'bcs->Residue' has the data type '__le32', convert it to the
correct byte order of the CPU using this driver when assigning it to
the local variable 'residue'.
Cc: stable <stable@kernel.org>
Fixes: 50a6cb932d ("USB: usb_storage: add ums-realtek driver")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250813145247.184717-3-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When add workaround for ERR051725, the usbmisc will put PHY to
Non-driving mode (OPMODE = 01) after stopping the device controller
and put PHY back to Normal mode (OPMODE = 00) after starting the device
controller.
However, this will bring issue for host controller. Because the PHY may
stay in Non-driving mode after switching the role from device to host.
Then the port will not work if USB device is attached. To fix this issue,
improving the workaround by putting PHY to Non-driving mode for a certain
period and back to Normal mode finally. To make host detect a disconnect
signal, the period should be at least 125us (a micro-frame time) for
high-speed link.
And only working as high-speed mode will need workaround for ERR051725.
So this will also filter the pullup event for high-speed.
Fixes: 11992b4100 ("usb: chipidea: imx: implement workaround for ERR051725")
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250811100833.862876-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kcov_remote_start_usb_softirq() the begin of urb's completion callback.
HCDs marked HCD_BH will invoke this function from the softirq and
in_serving_softirq() will detect this properly.
Root-HUB (RH) requests will not be delayed to softirq but complete
immediately in IRQ context.
This will confuse kcov because in_serving_softirq() will report true if
the softirq is served after the hardirq and if the softirq got
interrupted by the hardirq in which currently runs.
This was addressed by simply disabling interrupts in
kcov_remote_start_usb_softirq() which avoided the interruption by the RH
while a regular completion callback was invoked.
This not only changes the behaviour while kconv is enabled but also
breaks PREEMPT_RT because now sleeping locks can no longer be acquired.
Revert the previous fix. Address the issue by invoking
kcov_remote_start_usb() only if the context is just "serving softirqs"
which is identified by checking in_serving_softirq() and in_hardirq()
must be false.
Fixes: f85d39dd7e ("kcov, usb: disable interrupts in kcov_remote_start_usb_softirq")
Cc: stable <stable@kernel.org>
Reported-by: Yunseong Kim <ysk@kzalloc.com>
Closes: https://lore.kernel.org/all/20250725201400.1078395-2-ysk@kzalloc.com/
Tested-by: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250811082745.ycJqBXMs@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During a device-initiated disconnect, the End Transfer command resets
the event filter, allowing a new xferNotReady event to be generated
before the controller is fully halted. Processing this late event
incorrectly triggers a Start Transfer, which prevents the controller
from halting and results in a DSTS.DEVCTLHLT bit polling timeout.
Ignore the late xferNotReady event if the controller is already in a
disconnected state.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250807090700.2397190-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB core will unmap urb->transfer_dma after SETUP stage completes.
Then the USB controller will access unmapped memory when it received
device descriptor. If iommu is equipped, the entire test can't be
completed due to the memory accessing is blocked.
Fix it by calling map_urb_for_dma() again for IN stage. To reduce
redundant map for urb->transfer_buffer, this will also set
URB_NO_TRANSFER_DMA_MAP flag before first map_urb_for_dma() to skip
dma map for urb->transfer_buffer and clear URB_NO_TRANSFER_DMA_MAP
flag before second map_urb_for_dma().
Fixes: 216e0e563d ("usb: core: hcd: use map_urb_for_dma for single step set feature urb")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250806083955.3325299-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Increase the External ROM access timeouts to prevent failures during
programming of External SPI EEPROM chips. The current timeouts are
too short for some SPI EEPROMs used with uPD720201 controllers.
The current timeout for Chip Erase in renesas_rom_erase() is 100 ms ,
the current timeout for Sector Erase issued by the controller before
Page Program in renesas_fw_download_image() is also 100 ms. Neither
timeout is sufficient for e.g. the Macronix MX25L5121E or MX25V5126F.
MX25L5121E reference manual [1] page 35 section "ERASE AND PROGRAMMING
PERFORMANCE" and page 23 section "Table 8. AC CHARACTERISTICS (Temperature
= 0°C to 70°C for Commercial grade, VCC = 2.7V ~ 3.6V)" row "tCE" indicate
that the maximum time required for Chip Erase opcode to complete is 2 s,
and for Sector Erase it is 300 ms .
MX25V5126F reference manual [2] page 47 section "13. ERASE AND PROGRAMMING
PERFORMANCE (2.3V - 3.6V)" and page 42 section "Table 8. AC CHARACTERISTICS
(Temperature = -40°C to 85°C for Industrial grade, VCC = 2.3V - 3.6V)" row
"tCE" indicate that the maximum time required for Chip Erase opcode to
complete is 3.2 s, and for Sector Erase it is 400 ms .
Update the timeouts such, that Chip Erase timeout is set to 5 seconds,
and Sector Erase timeout is set to 500 ms. Such lengthy timeouts ought
to be sufficient for majority of SPI EEPROM chips.
[1] https://www.macronix.com/Lists/Datasheet/Attachments/8634/MX25L5121E,%203V,%20512Kb,%20v1.3.pdf
[2] https://www.macronix.com/Lists/Datasheet/Attachments/8750/MX25V5126F,%202.5V,%20512Kb,%20v1.1.pdf
Fixes: 2478be82de ("usb: renesas-xhci: Add ROM loader for uPD720201")
Cc: stable <stable@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250802225526.25431-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upon resume from system suspend, the PM runtime core issues the
following warning:
tegra-xudc 3550000.usb: Runtime PM usage count underflow!
This is because tegra_xudc_resume() unconditionally calls
schedule_work(&xudc->usb_role_sw_work) whether or not anything has
changed, which causes tegra_xudc_device_mode_off() to be called
even when we're already in that mode.
Keep track of the current state of "device_mode", and only schedule
this work if it has changed from the hardware state on resume.
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1uhtkH-007KDZ-JT@rmk-PC.armlinux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Another SanDisk 3.2Gen1 Flash Drive also need DELAY_INIT quick,
or it will randomly work incorrectly on Huawei hisi platforms
when doing reboot test.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250801082728.469406-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
EUD_MODE_MANAGER2 register is mapped to a memory region that is marked
as read-only for operating system running at EL1, enforcing access
restrictions that prohibit direct memory-mapped writes via writel().
Attempts to write to this region from HLOS can result in silent failures
or memory access violations, particularly when toggling EUD (Embedded
USB Debugger) state. To ensure secure register access, modify the driver
to use qcom_scm_io_writel(), which routes the write operation to Qualcomm
Secure Channel Monitor (SCM). SCM has the necessary permissions to access
protected memory regions, enabling reliable control over EUD state.
SC7280, the only user of EUD is also affected, indicating that this could
never have worked on a properly fused device.
Fixes: 9a1bf58ccd ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)")
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250731-eud_mode_manager_secure_access-v8-1-4a5dcbb79f41@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kthread_run() function returns error pointers so the
max3421_hcd->spi_thread pointer can be either error pointers or NULL.
Check for both before dereferencing it.
Fixes: 05dfa5c9bc ("usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJTMVAPtRe5H6jug@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Historically Qualcomm DWC3 glue driver supported both extcon and
usb-role-switch kinds of notifications. When Bjorn contributed [1] the
flattened representation for the DWC3 host controller, he also kept both
extcon and usb-role-switch support in the flattened driver & bindings.
Currently there are no in-kernel users for flattened DWC3 and extcon. As
device's DT needs to be manually converted from legacy to the flat DWC3
representation, we can drop (legacy / deprecated) extcon support from
the new DWC3 glue driver, significantly simplifying the code.
This potentially affects flattening effort for the following platforms:
Platforms currently using linux,extcon-usb-gpio device that need to
switch to gpio-usb-b-connector:
- apq8096-db820c,
- msm8996-sony-xperia-tone-dora
Platforms currently using linux,extcon-usb-gpio device that need to
switch to gpio-usb-c-connector (not supported at this moment) or to
implement typec support
- msm8996-sony-xperia-tone-kagura
- msm8996-sony-xperia-tone-keyaki
- msm8998-fxtec-pro1
- msm8998-sony-xperia-yoshino-lilac
- msm8998-sony-xperia-yoshino-maple
- msm8998-sony-xperia-yoshino-poplar
- sda660-inforce-ifc6560
- sdm630-sony-xperia-nile-discovery
- sdm630-sony-xperia-nile-pioneer
- sdm630-sony-xperia-nile-voyager
- sdm660-xiaomi-lavender
- sm6125-sony-xperia-seine-pdx201
- sm6125-xiaomi-ginkgo
- sm6125-xiaomi-laurel-sprout
Platforms using TI TUSB320L chip need to switch to represent the USB-C
connector properly (and to have a typec-class driver for the TUSB320L
chip):
- msm8996-xiaomi-gemini
- msm8996pro-xiaomi-natrium
- msm8996pro-xiaomi-scoprpio
Commit message suggested by Dmitry Baryshkov.
[1]: https://lore.kernel.org/all/20250414-dwc3-refactor-v7-0-f015b358722d@oss.qualcomm.com/
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250729092708.3628187-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When `devm_add_action_or_reset()` fails, it is due to a failed memory
allocation and will thus return `-ENOMEM`. `dev_err_probe()` doesn't do
anything when error is `-ENOMEM`. Therefore, remove the useless call to
`dev_err_probe()` when `devm_add_action_or_reset()` fails, and just
return the value instead.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/pndo6sukt8u.a.out@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This message is not a useful error in practice:
- when using tools such as usbguard, the message is always printed but
it does not presume anything regarding the actual device acceptance
(later 'authorized to connect' message is at info level, and not
displayed on console)
- this can be a source of flood if a usb device connection is flaky
- ... and it is only displayed as the result of an admin action
(modifying authorized_default), working as intended, so not likely
to be an error.
This is still useful to know when looking at usb devices problems, so
info seems appropriate for this class of messages together with the
later eventual authorized message.
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Link: https://lore.kernel.org/r/20250801-usb-auth-v1-1-a59bfdf0293f@atmark-techno.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the Renesas RZ/T2H (r9a09g077) SoC by adding a compatible
string to the usbhs_of_match table. The USBHS controller on the RZ/T2H is
functionally similar to the one found on the RZ/G2L. While there are minor
differences in register fields (for example, the AWAIT[8:13] bits in
SYSCFG1 register), the current driver does not configure these, allowing
reuse of the existing usbhs_rzg2l_plat_info for the RZ/T2H.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250805114730.2491238-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently during system reboot, SMMU disables its translations
while devices like USB may still be actively using DMA buffers.
This can lead to NOC errors and system crashes due to invalid
memory access.
Address this by adding a shutdown callback to dwc3-qcom, which
ensures proper teardown of UDC stack and prevents DWC3 controller
from accessing memory after SMMU translation is disabled. Reuse
the existing remove callback for this purpose.
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250725062158.2418961-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Multiple drivers that use v4l2_fh and call v4l2_fh_del() manually reset
the file->private_data pointer to NULL in their video device .release()
file operation handler. Move the code to the v4l2_fh_del() function to
avoid direct access to file->private_data in drivers. This requires
adding a file pointer argument to the function.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- filp->private_data = NULL;
...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...
- filp->private_data = NULL;
...>
}
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}
Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_del() prototype and reset file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_del() function prototype
and its documentation.
Additionally, white space issues have been fixed manually in
drivers/usb/gadget/function/uvc_v4l2.c
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
All the drivers that use v4l2_fh and call v4l2_fh_add() manually store a
pointer to the v4l2_fh instance in file->private_data in their video
device .open() file operation handler. Move the code to the
v4l2_fh_add() function to avoid direct access to file->private_data in
drivers. This requires adding a file pointer argument to the function.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- filp->private_data = fh;
...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...>
}
@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...
- filp->private_data = fh;
...>
}
Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_add() prototype set file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_add() function prototype
and its documentation.
Additionally, white space issues have been fixed manually in
drivers/media/platform/nvidia/tegra-vde/v4l2.c,
drivers/media/platform/rockchip/rkvdec/rkvdec.c,
drivers/media/v4l2-core/v4l2-fh.c and
drivers/staging/most/video/video.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Accessing file->private_data manually to retrieve the v4l2_fh pointer is
error-prone, as the field is a void * and will happily cast implicitly
to any pointer type.
Replace all remaining locations that read the v4l2_fh pointer directly
from file->private_data with usage of the file_to_v4l2_fh() function.
The change was generated manually.
No functional change is intended, this only paves the way to remove
direct accesses to file->private_data and make V4L2 drivers safer.
Other accesses to the field will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
- DEBUGFS
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
- SYSFS
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
- Support cache-ids for device-tree systems
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
- Rust
- Device
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
- Misc
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaIjkhwAKCRBFlHeO1qrK
LpXuAP9RWwfD9ZGgQZ9OsMk/0pZ2mDclaK97jcmI9TAeSxeZMgD1FHnOMTY7oSIi
iG7Muq0yLD+A5gk9HUnMUnFNrngWCg==
=jgRj
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
Here is the big set of USB and Thunderbolt driver changes for 6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates, no
major new features this development cycle. Stuff included in here is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are "obviously
correct" :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeVLw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn3RACgg394VU3ENwqvkh1iF95fVwVheJYAn08YUeoM
98vPdogv4+kuC3B0TbiM
=7pfy
-----END PGP SIGNATURE-----
Merge tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates,
no major new features this development cycle. Stuff included in here
is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are
'obviously correct' :)"
* tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (100 commits)
usb: musb: omap2430: clean up probe error handling
usb: musb: omap2430: fix device leak at unbind
usb: gadget: udc: renesas_usb3: fix device leak at unbind
usb: dwc3: meson-g12a: fix device leaks at unbind
usb: dwc3: imx8mp: fix device leak at unbind
usb: musb: omap2430: enable compile testing
usb: gadget: udc: renesas_usb3: drop unused module alias
usb: xhci: print xhci->xhc_state when queue_command failed
usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init()
USB: serial: option: add Foxconn T99W709
usb: core: add urb->sgt parameter description
thunderbolt: Fix copy+paste error in match_service_id()
usb: typec: ucsi: Update power_supply on power role change
usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
usb: typec: fusb302: cache PD RX state
usb: typec: ucsi: yoga-c630: add DRM dependency
usb: gadget : fix use-after-free in composite_dev_cleanup()
usb: chipidea: imx: Add a missing blank line
usb: gadget: f_uac1: replace scnprintf() with sysfs_emit()
usb: usblp: clean up assignment inside if conditions
...
Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeWPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymQHgCfR3KXFe7ElzXQqjJhtN/ej6IPijIAoI6k3g0m
4UewNOIef9XpIAJ8zuoo
=850o
-----END PGP SIGNATURE-----
Merge tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain
serial: 8250: fix panic due to PSLVERR
dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible
vt: defkeymap: Map keycodes above 127 to K_HOLE
vt: keyboard: Don't process Unicode characters in K_OFF mode
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: qcom-geni: move clock-rate logic to separate function
serial: qcom-geni: move resource control logic to separate functions
serial: qcom-geni: move resource initialization to separate function
soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms
dt-bindings: qcom: geni-se: describe SA8255p
dt-bindings: serial: describe SA8255p
serial: 8250_dw: Fix typo "notifer"
dt-bindings: serial: 8250: spacemit: set clocks property as required
dt-bindings: serial: renesas: Document RZ/V2N SCIF
serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build
tty: omit need_resched() before cond_resched()
serial: 8250_ni: Reorder local variables
serial: 8250_ni: Fix build warning
...
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose the
global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the existing
interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more users
- start the process of allowing to compile-out the legacy parts of the
GPIO core for users who don't need it by introducing a new Kconfig
option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio helper
out of the core struct gpio_chip into their own structure that wraps
it: create a new header with modern interfaces and convert several
drivers to using it
- remove the platform data structure associated with the gpio-mmio helper
from the kernel after having converted all remaining users to generic
device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value setter
callbacks
- convert gpio-rcar to using simple device power management ops callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already handles
that
- also drop unneeded GPIO range checks in drivers, the core already makes
sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the user
wants to change direction of the pin to output even though these
drivers don't need to do anything else to actually set the direction,
otherwise a call like gpiod_direction_output(d, 1) will not result in
the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases where
the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different devices
to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of simple
hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the arguments
in some functions, remove duplicate includes, etc.
- documentation updates
-----BEGIN PGP SIGNATURE-----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=tUPm
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver (Apple SMC) and extensions to existing drivers
for supporting new HW models. A lot of different impovements across
drivers and in core GPIO code. Details on that are in the signed tag
as usual.
We managed to remove some of the legacy APIs. Arnd Bergmann started to
work on making the legacy bits optional so that we may compile them
only for older platforms that still really need them.
Rob Herring has done a lot of work to convert legacy .txt dt-bindings
for GPIO controllers to YAML. There are only a few left now in the
GPIO tree.
A big part of the commits in this PR concern the conversion of GPIO
drivers to using the new line value setter callbacks. This conversion
is now complete treewide (unless I've missed something) and once all
the changes from different trees land in mainline, I'll send you
another PR containing a commit dropping the legacy callbacks from the
tree.
As the quest to pay back technical dept never really ends, we're
starting another set of interface conversions, this time it's about
moving fields specific to only a handful of drivers using the
gpio-mmio helper out of the core gpio_chip structure that every
controller implements and uses. This cycle we introduce a new set of
APIs and convert a few drivers under drivers/gpio/, next cycle we'll
convert remaining modules treewide (in gpio, pinctrl and mfd trees)
and finally remove the old interfaces and move the gpio-mmio fields
into their own structure wrapping gpio_chip.
One last change I should mention here is the rework of the sysfs
interface. In 2016, we introduced the GPIO character device as the
preferred alternative to the sysfs class under /sys/class/gpio. While
it has seen a wide adoption with the help of its user-space
counterpart - libgpiod - there are still users who prefer the
simplicity of sysfs.
As far as the GPIO subsystem is concerned, the problem is not the
existince of the GPIO class as such but rather the fact that it
exposes the global GPIO numbers to the user-space, stopping us from
ever being able to remove the numberspace from the kernel. To that
end, this release we introduced a parallel, limited sysfs interface
that doesn't expose these numbers and only implements a subset of
features that are relevant to the existing users. This is a result of
several discussions over the course of last year and should allow us
to remove the legacy part some time in the future.
Summary:
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose
the global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the
existing interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more
users
- start the process of allowing to compile-out the legacy parts of
the GPIO core for users who don't need it by introducing a new
Kconfig option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio
helper out of the core struct gpio_chip into their own structure
that wraps it: create a new header with modern interfaces and
convert several drivers to using it
- remove the platform data structure associated with the gpio-mmio
helper from the kernel after having converted all remaining users
to generic device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value
setter callbacks
- convert gpio-rcar to using simple device power management ops
callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already
handles that
- also drop unneeded GPIO range checks in drivers, the core already
makes sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the
user wants to change direction of the pin to output even though
these drivers don't need to do anything else to actually set the
direction, otherwise a call like gpiod_direction_output(d, 1) will
not result in the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases
where the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in
gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different
devices to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of
simple hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the
arguments in some functions, remove duplicate includes, etc.
- documentation updates"
* tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits)
MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips
gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB
gpio: virtio: Fix config space reading.
gpiolib: make legacy interfaces optional
dt-bindings: gpio: rockchip: Allow use of a power-domain
gpiolib: of: add forward declaration for struct device_node
power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC
gpio: Add new gpio-macsmc driver for Apple Macs
mfd: Add Apple Silicon System Management Controller
soc: apple: rtkit: Make shmem_destroy optional
dt-bindings: mfd: Add Apple Mac System Management Controller
dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller
dt-bindings: gpio: Add Apple Mac SMC GPIO block
gpio: cadence: Remove duplicated include in gpio-cadence.c
gpio: tps65219: Add support for TI TPS65214 PMIC
gpio: tps65219: Update _IDX & _OFFSET macro prefix
gpio: sysfs: Fix an end of loop test in gpiod_unexport()
dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema
dt-bindings: gpio: Convert maxim,max3191x to DT schema
dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles
...
places; unfortunately, it's easy to get wrong. A number of open-coded
attempts are out there, with varying amount of bogosities.
simple_recursive_removal() had been introduced for doing that with
all precautions needed; it does an equivalent of rm -rf, with sufficient
locking, eviction of anything mounted on top of the subtree, etc.
This series converts a bunch of open-coded instances to using that.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaIRCUwAKCRBZ7Krx/gZQ
66XWAP9BNyHcvl9uV/ku/mswYiRBxYoVogciIKeugwYTVLuTJgEA7jdh1eyLkvbS
rwbL7XD+Q35/vXZHEet+RLCGH3ae6wc=
=yaKF
-----END PGP SIGNATURE-----
Merge tag 'pull-simple_recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull simple_recursive_removal() update from Al Viro:
"Removing subtrees of kernel filesystems is done in quite a few places;
unfortunately, it's easy to get wrong. A number of open-coded attempts
are out there, with varying amount of bogosities.
simple_recursive_removal() had been introduced for doing that with all
precautions needed; it does an equivalent of rm -rf, with sufficient
locking, eviction of anything mounted on top of the subtree, etc.
This series converts a bunch of open-coded instances to using that"
* tag 'pull-simple_recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
functionfs, gadgetfs: use simple_recursive_removal()
kill binderfs_remove_file()
fuse_ctl: use simple_recursive_removal()
pstore: switch to locked_recursive_removal()
binfmt_misc: switch to locked_recursive_removal()
spufs: switch to locked_recursive_removal()
add locked_recursive_removal()
better lockdep annotations for simple_recursive_removal()
simple_recursive_removal(): saner interaction with fsnotify
Using numbered error labels is discouraged (e.g. as it requires
renumbering them when adding a new intermediate error path).
Rename the error labels after what they do.
While at it, drop the redundant platform allocation failure dev_err()
as the error would already have been logged by the allocator.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724091910.21092-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the reference to the control device taken by
of_find_device_by_node() during probe when the driver is unbound.
Fixes: 8934d3e4d0 ("usb: musb: omap2430: Don't use omap_get_control_dev()")
Cc: stable@vger.kernel.org # 3.13
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724091910.21092-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the reference to the companion device taken during
probe when the driver is unbound.
Fixes: 39facfa01c ("usb: gadget: udc: renesas_usb3: Add register of usb role switch")
Cc: stable@vger.kernel.org # 4.19
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724091910.21092-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the references taken to the child devices by
of_find_device_by_node() during probe on driver unbind.
Fixes: c99993376f ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Cc: stable@vger.kernel.org # 5.2
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250724091910.21092-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the reference to the dwc3 device taken by
of_find_device_by_node() on probe errors and on driver unbind.
Fixes: 6dd2565989 ("usb: dwc3: add imx8mp dwc3 glue layer driver")
Cc: stable@vger.kernel.org # 5.12
Cc: Li Jun <jun.li@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724091910.21092-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nothing seems to prevent the driver from being compile tested on
non-OMAP platforms so enable it to provide wider build coverage.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724092104.21317-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit f3323cd03e ("usb: gadget: udc: renesas_usb3: remove R-Car
H3 ES1.* handling") the driver only supports OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724092006.21216-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When encounters some errors like these:
xhci_hcd 0000:4a:00.2: xHCI dying or halted, can't queue_command
xhci_hcd 0000:4a:00.2: FIXME: allocate a command ring segment
usb usb5-port6: couldn't allocate usb_device
It's hard to know whether xhc_state is dying or halted. So it's better
to print xhc_state's value which can help locate the resaon of the bug.
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20250725060117.1773770-1-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's a new modem device id.
This has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaIIDiwAKCRALxc3C7H1l
CGspAP9JWbxqxUkjVL1SbDo33GkPpFzvgChd/T3c9aQFVzbhKgEA8aiBRjj8SW6D
D7LnACK+zJ3QnxKAgLOAU46H5+UXzQY=
=eFS2
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.17-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial device id for 6.17-rc1
Here's a new modem device id.
This has been in linux-next with no reported issues.
* tag 'usb-serial-6.17-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Foxconn T99W709
Here are the USB serial updates for 6.17-rc1, including
- switch to new gpiolib interface that can return errors
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaIICfQAKCRALxc3C7H1l
CHV4AQCvorLSquAZcYd//Ytx7p8p26TTG1fYHsxiLeyCdBqcLQD/YPMNoJrKTRBL
in3L3/ldbBrGr6vI8cTvQYVmlWtJ/w4=
=NGRU
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 6.17-rc1
Here are the USB serial updates for 6.17-rc1, including
- switch to new gpiolib interface that can return errors
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: cp210x: use new GPIO line value setter callbacks
USB: serial: ftdi_sio: use new GPIO line value setter callbacks
After a recent change in clang to expose uninitialized warnings from
const variables [1], there is a warning in cxacru_heavy_init():
drivers/usb/atm/cxacru.c:1104:6: error: variable 'bp' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
1104 | if (instance->modem_type->boot_rom_patch) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/atm/cxacru.c:1113:39: note: uninitialized use occurs here
1113 | cxacru_upload_firmware(instance, fw, bp);
| ^~
drivers/usb/atm/cxacru.c:1104:2: note: remove the 'if' if its condition is always true
1104 | if (instance->modem_type->boot_rom_patch) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/atm/cxacru.c:1095:32: note: initialize the variable 'bp' to silence this warning
1095 | const struct firmware *fw, *bp;
| ^
| = NULL
While the warning is technically correct that bp is conditionally passed
uninitialized to cxacru_upload_firmware(), it is ultimately a false
positive warning on the uninitialized use of bp because the same
condition that initializes bp, instance->modem_type->boot_rom_patch, is
the same one that gates the use of bp within cxacru_upload_firmware().
As this warning occurs in clang's frontend before inlining occurs, it
cannot know that these conditions are indentical to avoid the warning.
Manually inline cxacru_upload_firmware() into cxacru_heavy_init(), as
that is its only callsite, so that clang can see that bp is initialized
and used under the same condition, clearing up the warning without any
functional changes to the code (LLVM was already doing this inlining
later).
Cc: stable@vger.kernel.org
Fixes: 1b0e614652 ("[PATCH] USB ATM: driver for the Conexant AccessRunner chipset cxacru")
Closes: https://github.com/ClangBuiltLinux/linux/issues/2102
Link: 2464313eef [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250722-usb-cxacru-fix-clang-21-uninit-warning-v2-1-6708a18decd2@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmh9azkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG7GIH/0lpQtHRl6N+q2Qs
v75iG2ZouWyw2JlhUOHAToKU58MZqqTXLZzc8ZdY6fAd7DpXWKRGSDsyWVyLbUkt
UKGzXEIJsHXYvw2QIPbhkY9gQBWpdZTh4tHztFyKb0QLn81qkibVP6ChOwSzOGa/
xUyQ5v6yH+JvQlnQaCgy6hi7cMrLNSNZmuIjy0yc5Y153YPEtX5OUPO2PstpUx5r
AuiOhU4ewW9QCe07X/Pk7tdn0T2Jg8Kwk1FViaM0RBUf/0GXGfsovIxpUP/eCyMc
MA+9SXXLlDa/4Z8w3EsQYx6m2MnNmm0HPeevCmWqq3+Ocooik4si1BpzHfUaE6n/
/0D8zBg=
=NzEi
-----END PGP SIGNATURE-----
Merge tag 'v6.16-rc7' into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current power direction of an USB-C port also influences the
power_supply's online status, so a power role change should also update
the power_supply.
Fixes an issue on some systems where plugging in a normal USB device in
for the first time after a reboot will cause upower to erroneously
consider the system to be connected to AC power.
Cc: stable <stable@kernel.org>
Fixes: 0e6371fbfb ("usb: typec: ucsi: Report power supply changes")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250721-fix-ucsi-pwr-dir-notify-v1-1-e53d5340cb38@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ucsi_psy_get_current_max would return 0mA as the maximum current if
UCSI detected a BC or a Default USB Power sporce.
The comment in this function is true that we can't tell the difference
between DCP/CDP or SDP chargers, but we can guarantee that at least 1-unit
of USB 1.1/2.0 power is available, which is 100mA, which is a better
fallback value than 0, which causes some userspaces, including the ChromeOS
power manager, to regard this as a power source that is not providing
any power.
In reality, 100mA is guaranteed from all sources in these classes.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250717200805.3710473-1-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a race condition communication error, which ends up in
PD hard resets when losing the race. Some systems, like the Radxa ROCK
5B are powered through USB-C without any backup power source and use a
FUSB302 chip to do the PD negotiation. This means it is quite important
to avoid hard resets, since that effectively kills the system's
power-supply.
I've found the following race condition while debugging unplanned power
loss during booting the board every now and then:
1. lots of TCPM/FUSB302/PD initialization stuff
2. TCPM ends up in SNK_WAIT_CAPABILITIES (tcpm_set_pd_rx is enabled here)
3. the remote PD source does not send anything, so TCPM does a SOFT RESET
4. TCPM ends up in SNK_WAIT_CAPABILITIES for the second time
(tcpm_set_pd_rx is enabled again, even though it is still on)
At this point I've seen broken CRC good messages being send by the
FUSB302 with a logic analyzer sniffing the CC lines. Also it looks like
messages are being lost and things generally going haywire with one of
the two sides doing a hard reset once a broken CRC good message was send
to the bus.
I think the system is running into a race condition, that the FIFOs are
being cleared and/or the automatic good CRC message generation flag is
being updated while a message is already arriving.
Let's avoid this by caching the PD RX enabled state, as we have already
processed anything in the FIFOs and are in a good state. As a side
effect that this also optimizes I2C bus usage :)
As far as I can tell the problem theoretically also exists when TCPM
enters SNK_WAIT_CAPABILITIES the first time, but I believe this is less
critical for the following reason:
On devices like the ROCK 5B, which are powered through a TCPM backed
USB-C port, the bootloader must have done some prior PD communication
(initial communication must happen within 5 seconds after plugging the
USB-C plug). This means the first time the kernel TCPM state machine
reaches SNK_WAIT_CAPABILITIES, the remote side is not sending messages
actively. On other devices a hard reset simply adds some extra delay and
things should be good afterwards.
Fixes: c034a43e72 ("staging: typec: Fairchild FUSB302 Type-c chip driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704-fusb302-race-condition-fix-v1-1-239012c0e27a@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Selecting DRM_AUX_HPD_BRIDGE is not possible from a built-in driver when
CONFIG_DRM=m:
WARNING: unmet direct dependencies detected for DRM_AUX_HPD_BRIDGE
Depends on [m]: HAS_IOMEM [=y] && DRM [=m] && DRM_BRIDGE [=y] && OF [=y]
Selected by [y]:
- UCSI_LENOVO_YOGA_C630 [=y] && USB_SUPPORT [=y] && TYPEC [=y] && TYPEC_UCSI [=y] && EC_LENOVO_YOGA_C630 [=y] && DRM_BRIDGE [=y] && OF [=y]
arm-linux-gnueabi-ld: drivers/gpu/drm/bridge/aux-hpd-bridge.o: in function `drm_aux_hpd_bridge_notify':
aux-hpd-bridge.c:(.text.drm_aux_hpd_bridge_notify+0x28): undefined reference to `drm_bridge_hpd_notify'
arm-linux-gnueabi-ld: drivers/gpu/drm/bridge/aux-hpd-bridge.o: in function `drm_aux_hpd_bridge_probe':
aux-hpd-bridge.c:(.text.drm_aux_hpd_bridge_probe+0x20): undefined reference to `__devm_drm_bridge_alloc'
Add a dependency to force UCSI_LENOVO_YOGA_C630 to be a loadable module as
well in this configuration.
Fixes: eb90d36bfa ("usb: typec: ucsi: yoga-c630: register DRM HPD bridge")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250717133045.991254-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. In func configfs_composite_bind() -> composite_os_desc_req_prepare():
if kmalloc fails, the pointer cdev->os_desc_req will be freed but not
set to NULL. Then it will return a failure to the upper-level function.
2. in func configfs_composite_bind() -> composite_dev_cleanup():
it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it
will attempt to use it.This will lead to a use-after-free issue.
BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0
Read of size 8 at addr 0000004827837a00 by task init/1
CPU: 10 PID: 1 Comm: init Tainted: G O 5.10.97-oh #1
kasan_report+0x188/0x1cc
__asan_load8+0xb4/0xbc
composite_dev_cleanup+0xf4/0x2c0
configfs_composite_bind+0x210/0x7ac
udc_bind_to_driver+0xb4/0x1ec
usb_gadget_probe_driver+0xec/0x21c
gadget_dev_desc_UDC_store+0x264/0x27c
Fixes: 37a3a53342 ("usb: gadget: OS Feature Descriptors support")
Cc: stable <stable@kernel.org>
Signed-off-by: Tao Xue <xuetao09@huawei.com>
Link: https://lore.kernel.org/r/20250721093908.14967-1-xuetao09@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a checkpatch warning:
CHECK: Please use a blank line after function/struct/union/enum declarations
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/36d1c961-319e-4457-bdc1-69f8b6bed33e@sabinyo.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/filesystems/sysfs.rst mentions that show() should only
use sysfs_emit() or sysfs_emit_at() when formating the value to be
returned to user space. So replace scnprintf() with sysfs_emit().
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://lore.kernel.org/r/20250718175037.299710-1-sumanth.gavini@yahoo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cleans up a few cases where assignments were made
inside of if conditions, like
if ((rv = func()) < 0)
into two lines, to improve readability and be more in-line with
Linux kernel coding style. It also cleans up checkpatch warnings
like:
ERROR: do not use assignment in if condition
No functional change, just a style and maintainability fix.
Signed-off-by: Darshan Rathod <darshan.rathod@siqol.com>
Link: https://lore.kernel.org/r/20250718091045.264129-1-darshan.rathod@siqol.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the devices that need their endpoints to get an
initial clear_halt, this needs to be done before
the devices can be opened. That means it needs to be
before the devices are registered.
Fixes: 15bf722e6f ("cdc-acm: Add support of ATOL FPrint fiscal printers")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250717141259.2345605-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmh9azkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG7GIH/0lpQtHRl6N+q2Qs
v75iG2ZouWyw2JlhUOHAToKU58MZqqTXLZzc8ZdY6fAd7DpXWKRGSDsyWVyLbUkt
UKGzXEIJsHXYvw2QIPbhkY9gQBWpdZTh4tHztFyKb0QLn81qkibVP6ChOwSzOGa/
xUyQ5v6yH+JvQlnQaCgy6hi7cMrLNSNZmuIjy0yc5Y153YPEtX5OUPO2PstpUx5r
AuiOhU4ewW9QCe07X/Pk7tdn0T2Jg8Kwk1FViaM0RBUf/0GXGfsovIxpUP/eCyMc
MA+9SXXLlDa/4Z8w3EsQYx6m2MnNmm0HPeevCmWqq3+Ocooik4si1BpzHfUaE6n/
/0D8zBg=
=NzEi
-----END PGP SIGNATURE-----
Merge tag 'v6.16-rc7' into usb-next
We need the USB/Thunderbolt fixes in here for other patches to be on top
of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a subtle contradiction between sections of the xHCI 1.2 spec
regarding the initialization of Input Endpoint Context fields. Section
4.8.2 ("Endpoint Context Initialization") states that all fields should
be initialized to 0. However, Section 6.2.3 ("Endpoint Context", p.453)
specifies that the Average TRB Length (avg_trb_len) field shall be
greater than 0, and explicitly notes (p.454): "Software shall set
Average TRB Length to '8' for control endpoints."
Strictly setting all fields to 0 during initialization conflicts with
the specific recommendation for control endpoints. In practice, setting
avg_trb_len = 0 is not meaningful for the hardware/firmware, as the
value is used for bandwidth calculation.
Motivation: Our company is developing a custom Virtual xHC hardware
platform that strictly follows the xHCI spec and its recommendations.
During validation, we observed that enumeration fails and a parameter
error (TRB Completion Code = 5) is reported if avg_trb_len for EP0 is
not set to 8 as recommended by Section 6.2.3. This demonstrates the
importance of assigning a meaningful, non-zero value to avg_trb_len,
even in virtualized or emulated environments.
This patch explicitly sets avg_trb_len to 8 for EP0 in
xhci_setup_addressable_virt_dev(), as recommended in Section 6.2.3, to
prevent potential issues with xHCI host controllers that enforce the
spec strictly.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220033
Signed-off-by: Jay Chen <shawn2000100@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250717073107.488599-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a USB4 dock is unplugged from a system it won't respond to ring
events. The PCI core handles the surprise removal event and notifies
all PCI drivers. The XHCI PCI driver sets a flag that the device is
being removed, and when the device stops responding a flag is also
added to indicate it's dying.
When that flag is set don't bother to show warnings about a missing
controller.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250717073107.488599-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a USB4 dock is unplugged from a system it won't respond to ring
events. The PCI core handles the surprise removal event and notifies
all PCI drivers. The XHCI PCI driver sets a flag that the device is
being removed as well.
When that flag is set don't show messages in the cleanup path for
marking the controller dead.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250717073107.488599-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hub driver warm-resets ports in SS.Inactive or Compliance mode to
recover a possible connected device. The port reset code correctly
detects if a connection is lost during reset, but hub driver
port_event() fails to take this into account in some cases.
port_event() ends up using stale values and assumes there is a
connected device, and will try all means to recover it, including
power-cycling the port.
Details:
This case was triggered when xHC host was suspended with DbC (Debug
Capability) enabled and connected. DbC turns one xHC port into a simple
usb debug device, allowing debugging a system with an A-to-A USB debug
cable.
xhci DbC code disables DbC when xHC is system suspended to D3, and
enables it back during resume.
We essentially end up with two hosts connected to each other during
suspend, and, for a short while during resume, until DbC is enabled back.
The suspended xHC host notices some activity on the roothub port, but
can't train the link due to being suspended, so xHC hardware sets a CAS
(Cold Attach Status) flag for this port to inform xhci host driver that
the port needs to be warm reset once xHC resumes.
CAS is xHCI specific, and not part of USB specification, so xhci driver
tells usb core that the port has a connection and link is in compliance
mode. Recovery from complinace mode is similar to CAS recovery.
xhci CAS driver support that fakes a compliance mode connection was added
in commit 8bea2bd37d ("usb: Add support for root hub port status CAS")
Once xHCI resumes and DbC is enabled back, all activity on the xHC
roothub host side port disappears. The hub driver will anyway think
port has a connection and link is in compliance mode, and hub driver
will try to recover it.
The port power-cycle during recovery seems to cause issues to the active
DbC connection.
Fix this by clearing connect_change flag if hub_port_reset() returns
-ENOTCONN, thus avoiding the whole unnecessary port recovery and
initialization attempt.
Cc: stable@vger.kernel.org
Fixes: 8bea2bd37d ("usb: Add support for root hub port status CAS")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250623133947.3144608-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cros_ec_ucsi fails to allocate a UCSI instance in it's probe function
because it does not define all operations checked by ucsi_create.
Update cros_ec_ucsi operations to use the same function for read_cci
and poll_cci.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20250711202033.2201305-1-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The general recommendation is to not use of_match_ptr() or CONFIG_OF
ifdef.
Drop them.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250707-max77759-irq-wake-v1-2-d367f633e4bc@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver calls enable_irq_wake() during probe() unconditionally, and
never issues the required corresponding disable_irq_wake() to disable
hardware interrupt wakeup signals.
Additionally, whether or not a device should wake-up the system is
meant to be a policy decision based on sysfs (.../power/wakeup) in the
first place.
Update the driver to use the standard approach to enable/disable IRQ
wake during the suspend/resume callbacks. This solves both issues
described above.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250707-max77759-irq-wake-v1-1-d367f633e4bc@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the Renesas USB3.0 Peripheral controller driver from
SIMPLE_DEV_PM_OPS() to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr().
This lets us drop the check for CONFIG_PM_SLEEP, and reduces kernel size
in case CONFIG_PM or CONFIG_PM_SLEEP is disabled, while increasing build
coverage.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/424d6c7843c5bfd47c0e1d8d02aa030581530bb1.1752087999.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the Renesas USBHS driver from SIMPLE_DEV_PM_OPS() to
DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(). This lets us drop the
__maybe_unused annotations from its suspend and resume callbacks, and
reduces kernel size in case CONFIG_PM or CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e1136dcd351a19b2e7145436bea1f38faa93a677.1752087914.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some more device ids for 6.16-rc7.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaHYKHAAKCRALxc3C7H1l
CFxHAP9HWsiKLcInAoXyfqfl8tPYYhQYzkzjh7+WB/nF4A2T7gD/SYcmPFtjDzYm
v0tV+py1PWllICujnR1CYKjk9EMJnQs=
=Afhj
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.16-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial device ids for 6.16-rc7
Here are some more device ids for 6.16-rc7.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.16-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit Cinterion FE910C04 (ECM) composition
USB: serial: ftdi_sio: add support for NDI EMGUIDE GEMINI
For UTMI+ PHY, according to programming guide, first should be set
PMUACTV bit then STOPPCLK bit. Otherwise, when the device issues
Remote Wakeup, then host notices disconnect instead.
For ULPI PHY, above mentioned bits must be set in reversed order:
STOPPCLK then PMUACTV.
Fixes: 4483ef3c16 ("usb: dwc2: Add hibernation updates for ULPI PHY")
Cc: stable <stable@kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/692110d3c3d9bb2a91cedf24528a7710adc55452.1751881374.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leaving the USB BCR asserted prevents the associated GDSC to turn on. This
blocks any subsequent attempts of probing the device, e.g. after a probe
deferral, with the following showing in the log:
[ 1.332226] usb30_prim_gdsc status stuck at 'off'
Leave the BCR deasserted when exiting the driver to avoid this issue.
Cc: stable <stable@kernel.org>
Fixes: a4333c3a6b ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250709132900.3408752-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NDI (Northern Digital Inc.) is introducing a new product called the
EMGUIDE GEMINI that will use an FTDI chip for USB serial communications.
Add the NDI EMGUIDE GEMINI product ID that uses the NDI Vendor ID
rather than the FTDI Vendor ID, unlike older products.
Signed-off-by: Ryan Mann <rmann@ndigital.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Here's a new modem device id.
Everything has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaG5AeQAKCRALxc3C7H1l
CG8IAP4rm27zOB/s1WNNh+G1595HaWN9HO4dKrhgHbbPtN3sZgD/ak1+e7QqcGNY
UUmLiPNz2L5nCQZdXtIghFw8ihA/Iwc=
=/71p
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.16-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial device id for 6.16-rc6
Here's a new modem device id.
Everything has been in linux-next with no reported issues.
* tag 'usb-serial-6.16-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Foxconn T99W640
This will add usb_alloc_noncoherent() and usb_free_noncoherent()
functions to support alloc and free buffer in a dma-noncoherent way.
To explicit manage the memory ownership for the kernel and device,
this will also add usb_dma_noncoherent_sync_for_cpu/device() functions
and call it at proper time. The management requires the user save
sg_table returned by usb_alloc_noncoherent() to urb->sgt.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250704095751.73765-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When writing an empty string to either 'qw_sign' or 'landingPage'
sysfs attributes, the store functions attempt to access page[l - 1]
before validating that the length 'l' is greater than zero.
This patch fixes the vulnerability by adding a check at the beginning
of os_desc_qw_sign_store() and webusb_landingPage_store() to handle
the zero-length input case gracefully by returning immediately.
Signed-off-by: Xinyu Liu <katieeliu@tencent.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/tencent_B1C9481688D0E95E7362AB2E999DE8048207@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable USB driver for s32g2. This chip has an errata ERR050474[1]
so we need to set S32G_UCMALLBE to avoid some memory corruption. I
have include the description below:
ERR050474: USB : USB data may be corrupted if transaction size is
non-multiple of 32bits
Description
When USB issues narrow length transfers i.e. AHB transaction size is less
than 4bytes, data for that transaction will get corrupted. Narrow length
transactions can occur if the transaction size is non-multiple of four
bytes, error scenarios terminate the transactions early or if the address
offset programmed in QTD is 4 Byte unaligned. This happens because the
SoC NOC is not able to handle the byte strobes generated by USB controller
and is dependent on its internally generates byte strobes.
Workaround
Narrow transfers work properly on bypassing USB controller’s byte
generation logic. This can be done by setting UCMALLBE (bit 15, USB Core
Master All Byte Enable) bit of UOTGNC_CR.
Link: https://www.nxp.com/webapp/Download?colCode=S32G2_1P77B
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/abb2ed5d-f01a-48f6-b1ae-6f8f39ae40fa@sabinyo.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/filesystems/sysfs.rst mentions that show() should only
use sysfs_emit() or sysfs_emit_at() when formating the value to be
returned to user space. So replace scnprintf() with sysfs_emit().
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://lore.kernel.org/r/20250704003425.467299-1-sumanth.gavini@yahoo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 24729b307e ("usb: gadget: f_fs: Fix race between aio_cancel()
and AIO request complete") moved the call to usb_ep_free_request() from
ffs_epfile_async_io_complete() to ffs_user_copy_worker().
In ffs_user_copy_worker(), ki_complete() is called before
usb_ep_free_request(). Once ki_complete() returns, ffs_aio_cancel() can
no longer be invoked for the completed kiocb, as ki_complete() removes it
from the &ctx->active_reqs list in aio.c. ffs_aio_cancel() only applies
to kiocb instances still present on this list.
The potential race between ki_complete() and ffs_aio_cancel() is already
guarded by the &ctx->ctx_lock spinlock in aio.c.
As a result, there is no race condition between the usb_ep_dequeue() call
in ffs_aio_cancel() and the usb_ep_free_request() call in
ffs_user_copy_worker(). Consequently, the spin lock/unlock operations on
&io_data->ffs->eps_lock are no longer necessary.
Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com>
Link: https://lore.kernel.org/r/20250701113602.33402-2-ingo.rohloff@lauterbach.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the TRB reclaim logic always inspects the TRB's CHN (Chain) bit
directly to determine whether a TRB is part of a chain, the explicit
'chain' parameter passed into dwc3_gadget_ep_reclaim_completed_trb()
is no longer necessary.
This cleanup simplifies the reclaim code by avoiding duplication of
chain state tracking, and makes the reclaim logic rely entirely on the
hardware descriptor flags — which are already present and accurate at
this stage.
No functional changes intended.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
Link: https://lore.kernel.org/r/20250629090414.294308-2-johannes.schneider@leica-geosystems.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In hidg_bind(), if alloc_workqueue() fails after usb_assign_descriptors()
has successfully allocated the USB descriptors, the current error handling
does not call usb_free_all_descriptors() to free the allocated descriptors,
resulting in a memory leak.
Restructure the error handling by adding proper cleanup labels:
- fail_free_all: cleans up workqueue and descriptors
- fail_free_descs: cleans up descriptors only
- fail: original cleanup for earlier failures
This ensures that allocated resources are properly freed in reverse order
of their allocation, preventing the memory leak when alloc_workqueue() fails.
Fixes: a139c98f76 ("USB: gadget: f_hid: Add GET_REPORT via userspace IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Yuhao Jiang <danisjiang@gmail.com>
Link: https://lore.kernel.org/r/20250623094844.244977-1-danisjiang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When unplugging the USB cable or disconnecting a gadget in usb peripheral mode with
echo "" > /sys/kernel/config/usb_gadget/<your_gadget>/UDC,
/sys/class/udc/musb-hdrc.0/state does not change from USB_STATE_CONFIGURED.
Testing on dwc2/3 shows they both update the state to USB_STATE_NOTATTACHED.
Add calls to usb_gadget_set_state in musb_g_disconnect and musb_gadget_stop
to fix both cases.
Fixes: 49401f4169 ("usb: gadget: introduce gadget state tracking")
Cc: stable@vger.kernel.org
Co-authored-by: Yehowshua Immanuel <yehowshua.immanuel@twosixtech.com>
Signed-off-by: Yehowshua Immanuel <yehowshua.immanuel@twosixtech.com>
Signed-off-by: Drew Hamilton <drew.hamilton@zetier.com>
Link: https://lore.kernel.org/r/20250701154126.8543-1-drew.hamilton@zetier.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
