This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Here is the "big" set of USB and Thunderbolt driver updates for 7.0-rc1.
Overall more lines were removed than added, thanks to dropping the
obsolete isp1362 USB host controller driver, always a nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaZR0Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylcCgCfUyUFi0UOMPRyrU/fo5nyeWomgvsAnRst3nva
y7BvYwC2L4FIP23snrTM
=8S4Q
-----END PGP SIGNATURE-----
Merge tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
When all files are closed, functionfs needs ffs_data_reset() to be
done before any further opens are allowed.
During that time we have ffs->state set to FFS_CLOSING; that makes
->open() fail with -EBUSY. Once ffs_data_reset() is done, it
switches state (to FFS_READ_DESCRIPTORS) indicating that opening
that thing is allowed again. There's a couple of additional twists:
* mounting with -o no_disconnect delays ffs_data_reset()
from doing that at the final ->release() to the first subsequent
open(). That's indicated by ffs->state set to FFS_DEACTIVATED;
if open() sees that, it immediately switches to FFS_CLOSING and
proceeds with doing ffs_data_reset() before returning to userland.
* a couple of usb callbacks need to force the delayed
transition; unfortunately, they are done in locking environment
that does not allow blocking and ffs_data_reset() can block.
As the result, if these callbacks see FFS_DEACTIVATED, they change
state to FFS_CLOSING and use schedule_work() to get ffs_data_reset()
executed asynchronously.
Unfortunately, the locking is rather insufficient. A fix attempted
in e5bf5ee266 ("functionfs: fix the open/removal races") had closed
a bunch of UAF, but it didn't do anything to the callbacks, lacked
barriers in transition from FFS_CLOSING to FFS_READ_DESCRIPTORS
_and_ it had been too heavy-handed in open()/open() serialization -
I've used ffs->mutex for that, and it's being held over actual IO on
ep0, complete with copy_from_user(), etc.
Even more unfortunately, the userland side is apparently racy enough
to have the resulting timing changes (no failures, just a delayed
return of open(2)) disrupt the things quite badly. Userland bugs
or not, it's a clear regression that needs to be dealt with.
Solution is to use a spinlock for serializing these state checks and
transitions - unlike ffs->mutex it can be taken in these callbacks
and it doesn't disrupt the timings in open().
We could introduce a new spinlock, but it's easier to use the one
that is already there (ffs->eps_lock) instead - the locking
environment is safe for it in all affected places.
Since now it is held over all places that alter or check the
open count (ffs->opened), there's no need to keep that atomic_t -
int would serve just fine and it's simpler that way.
Fixes: e5bf5ee266 ("functionfs: fix the open/removal races")
Fixes: 18d6b32fca ("usb: gadget: f_fs: add "no_disconnect" mode") # v4.0
Tested-by: Samuel Wu <wusamuel@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Based on the reality[1][2] that vb2_dma_sg_alloc() can't alloc buffer with
device DMA limits, those device will always get below error: "swiotlb
buffer is full (sz: 393216 bytes), total 65536 (slots), used 2358 (slots)"
and the uvc gadget function can't work at all.
The videobuf2-dma-sg.c driver doesn't has a formal improve about this issue
till now. For UVC gadget, the videobuf2 subsystem doesn't do dma_map() on
vmalloc returned big buffer when allocate the video buffers, however, it do
it for dma_sg returned buffer. So the issue happens for vb2_dma_sg_alloc().
To workaround the issue, lets retry vb2_reqbufs() with
vb_vmalloc_memops if it fails to allocate buffer with vb2_dma_sg_memops.
If use vmalloced buffer, UVC gadget will allocate some small buffers for
each usb_request to do dma transfer, then uvc driver will memcopy data
from big buffer to small buffer.
Link[1]: https://lore.kernel.org/linux-media/20230828075420.2009568-1-anle.pan@nxp.com/
Link[2]: https://lore.kernel.org/linux-media/20230914145812.12851-1-hui.fang@nxp.com/
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-4-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uvcg_queue_init() may fail, but its return value is currently ignored.
Propagate the error code from uvcg_queue_init() to correctly report
initialization failures.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-3-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to USB specification:
For full-/high-speed isochronous endpoints, the bInterval value is
used as the exponent for a 2^(bInterval-1) value.
To correctly convert bInterval as interval_duration:
interval_duration = 2^(bInterval-1) * frame_interval
Because the unit of video->interval is 100ns, add a comment info to
make it clear.
Fixes: 48dbe73117 ("usb: gadget: uvc: set req_size and n_requests based on the frame interval")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-2-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current req_payload_size calculation has 2 issue:
(1) When the first time calculate req_payload_size for all the buffers,
reqs_per_frame = 0 will be the divisor of DIV_ROUND_UP(). So
the result is undefined.
This happens because VIDIOC_STREAMON is always executed after
VIDIOC_QBUF. So video->reqs_per_frame will be 0 until VIDIOC_STREAMON
is run.
(2) The buf->req_payload_size may be bigger than max_req_size.
Take YUYV pixel format as example:
If bInterval = 1, video->interval = 666666, high-speed:
video->reqs_per_frame = 666666 / 1250 = 534
720p: buf->req_payload_size = 1843200 / 534 = 3452
1080p: buf->req_payload_size = 4147200 / 534 = 7766
Based on such req_payload_size, the controller can't run normally.
To fix above issue, assign max_req_size to buf->req_payload_size when
video->reqs_per_frame = 0. And limit buf->req_payload_size to
video->req_size if it's large than video->req_size. Since max_req_size
is used at many place, add it to struct uvc_video and set the value once
endpoint is enabled.
Fixes: 98ad032915 ("usb: gadget: uvc: set req_length based on payload by nreqs instead of req_size")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-1-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, DMA_FROM_DEVICE is used when attaching DMABUFs to IN
endpoints and DMA_TO_DEVICE for OUT endpoints. This is inverted from
how it should be.
The result is IOMMU read-only mappings placed on OUT queues,
triggering arm-smmu write faults.
Put differently, OUT endpoints flow data from host -> gadget, meaning
the UDC peripheral needs to have write access to the buffer to fill it
with the incoming data.
This commit flips the directions and updates the implicit-sync helpers
so IN endpoints act as readers and OUT endpoints as writers.
Signed-off-by: Sam Day <me@samcday.com>
Tested-by: David Heidelberg <david@ixit.cz> # OnePlus 6T on sdm845-next-20251119
Link: https://patch.msgid.link/20260108-ffs-dmabuf-ioctl-fix-v1-2-e51633891a81@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ffs_epfile_ioctl handles FUNCTIONFS_DMABUF_* ioctls, it's currently
falling through when copy_from_user fails.
However, this fallthrough isn't being checked properly, so the handler
continues executing further than it should. It then tries the secondary
dispatch where it ultimately gives up and returns -ENOTTY.
The end result is invalid ioctl invocations will yield a -ENOTTY rather
than an -EFAULT.
It's a common pattern elsewhere in the kernel code to directly return
-EFAULT when copy_from_user fails. So we update ffs_epfile_ioctl to do
the same and fix this issue.
Signed-off-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20260108-ffs-dmabuf-ioctl-fix-v1-1-e51633891a81@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In usbg_submit_command(), which handles the UAS protocol, the 'data_len'
member of the 'usbg_cmd' structure was left uninitialized by the
logic, relying instead on the zeroing performed by usbg_get_cmd().
In contrast, the BOT path (bot_submit_command) explicitly initializes
this field from the Command Block Wrapper (CBW). This discrepancy is
evident in error handling paths where __target_init_cmd() is called
using cmd->data_len.
Explicitly initialize cmd->data_len to 0 in the UAS path and use this
variable when calling target_submit_cmd(). This ensures architectural
consistency between the UAS and BOT protocols within the driver and
avoids reliance on implicit memory state during error transitions.
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://patch.msgid.link/20260107190622.26070-1-jiashengjiangcool@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the net_device is allocated in ncm_alloc_inst() and freed in
ncm_free_inst(). This ties the network interface's lifetime to the
configuration instance rather than the USB connection (bind/unbind).
This decoupling causes issues when the USB gadget is disconnected where
the underlying gadget device is removed. The net_device can outlive its
parent, leading to dangling sysfs links and NULL pointer dereferences
when accessing the freed gadget device.
Problem 1: NULL pointer dereference on disconnect
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
Call trace:
__pi_strlen+0x14/0x150
rtnl_fill_ifinfo+0x6b4/0x708
rtmsg_ifinfo_build_skb+0xd8/0x13c
rtmsg_ifinfo+0x50/0xa0
__dev_notify_flags+0x4c/0x1f0
dev_change_flags+0x54/0x70
do_setlink+0x390/0xebc
rtnl_newlink+0x7d0/0xac8
rtnetlink_rcv_msg+0x27c/0x410
netlink_rcv_skb+0x134/0x150
rtnetlink_rcv+0x18/0x28
netlink_unicast+0x254/0x3f0
netlink_sendmsg+0x2e0/0x3d4
Problem 2: Dangling sysfs symlinks
console:/ # ls -l /sys/class/net/ncm0
lrwxrwxrwx ... /sys/class/net/ncm0 ->
/sys/devices/platform/.../gadget.0/net/ncm0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/ncm0
ls: .../gadget.0/net/ncm0: No such file or directory
Move the net_device allocation to ncm_bind() and deallocation to
ncm_unbind(). This ensures the network interface exists only when the
gadget function is actually bound to a configuration.
To support pre-bind configuration (e.g., setting interface name or MAC
address via configfs), cache user-provided options in f_ncm_opts
using the gether_opts structure. Apply these cached settings to the
net_device upon creation in ncm_bind().
Preserve the use-after-free fix from commit 6334b8e455 ("usb: gadget:
f_ncm: Fix UAF ncm object at re-bind after usb ep transport error").
Check opts->net in ncm_set_alt() and ncm_disable() to ensure
gether_disconnect() runs only if a connection was established.
Fixes: 40d133d7f5 ("usb: gadget: f_ncm: convert to new function interface with backward compatibility")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20251230-ncm-refactor-v1-3-793e347bc7a7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The net_device in the u_ether framework currently requires explicit
calls to unregister and free the device.
Introduce gether_unregister_free_netdev() and the corresponding
auto-cleanup macro. This ensures that if a net_device is registered, it
is properly unregistered and the associated work queue is flushed before
the memory is freed.
This is a preparatory patch to simplify error handling paths in gadget
drivers by removing the need for explicit goto labels for net_device
cleanup.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20251230-ncm-refactor-v1-2-793e347bc7a7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the net_device is allocated when the function instance is
created (e.g., in ncm_alloc_inst()). While this allows userspace to
configure the device early, it decouples the net_device lifecycle from
the actual USB connection state (bind/unbind). The goal is to defer
net_device creation to the bind callback to properly align the lifecycle
with its parent gadget device.
However, deferring net_device allocation would prevent userspace from
configuring parameters (like interface name or MAC address) before the
net_device exists.
Introduce a new structure, struct gether_opts, associated with the
usb_function_instance, to cache settings independently of the
net_device. These settings include the interface name pattern, MAC
addresses (device and host), queue multiplier, and address assignment
type.
New helper functions are added:
- gether_setup_opts_default(): Initializes struct gether_opts with
defaults, including random MAC addresses.
- gether_apply_opts(): Applies the cached options from a struct
gether_opts to a valid net_device.
To expose these options to userspace, new configfs macros
(USB_ETHER_OPTS_ITEM and USB_ETHER_OPTS_ATTR_*) are defined in
u_ether_configfs.h. These attributes are part of the function
instance's configfs group.
This refactoring is a preparatory step. It allows the subsequent patch
to safely move the net_device allocation from the instance creation
phase to the bind phase without losing the ability to pre-configure
the interface via configfs.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20251230-ncm-refactor-v1-1-793e347bc7a7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to configure maxburst via configfs for bulk endpoints.
Update gadget documentation describing the new configfs property.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://patch.msgid.link/20251227145224.2091397-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
65061 20968 256 86285 1510d drivers/usb/gadget/configfs.o
After:
=====
text data bss dec hex filename
66181 19848 256 86285 1510d drivers/usb/gadget/configfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/49cec1cb84425f854de80b6d69b53a5a3cda8189.1766164523.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using f_midi from configfs the USB MIDI interface string is hardcoded
to 'MIDI function'.
This USB string descriptor is used by some third-party OS or software to
display the name of the MIDI device
Since we add an additional string option a new macro block was created to
factorize declarations
Signed-off-by: Victor Krawiec <victor.krawiec@arturia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251209164006.143219-1-victor.krawiec@arturia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of USB and Thunderbolt driver updates for 6.19-rc1.
Nothing major here, just lots of tiny updates for most of the common USB
drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTLNQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn29wCcD23xCSWuRIKHfSWlefCwptHKT0AAoM0NJdeO
C4/4pui5ifTu1g5Vud1r
=Sm/3
-----END PGP SIGNATURE-----
Merge tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
dentries of created objects in dcache (and undo it when removing those).
Reference is grabbed and not released, but it's not actually _stored_
anywhere. That works, but it's hard to follow and verify; among other
things, we have no way to tell _which_ of the increments is intended
to be an unpaired one. Worse, on removal we need to decide whether
the reference had already been dropped, which can be non-trivial if
that removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag (DCACHE_PERSISTENT)
marking those "leaked" dentries. Having it set claims responsibility
for +1 in refcount.
The end result this series is aiming for:
* get these unbalanced dget() and dput() replaced with new primitives that
would, in addition to adjusting refcount, set and clear persistency flag.
* instead of having kill_litter_super() mess with removing the remaining
"leaked" references (e.g. for all tmpfs files that hadn't been removed
prior to umount), have the regular shrink_dcache_for_umount() strip
DCACHE_PERSISTENT of all dentries, dropping the corresponding
reference if it had been set. After that kill_litter_super() becomes
an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many places
in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary pieces
have already gone into mainline. This chunk is finally getting to the
meat of that stuff - infrastructure and most of the conversions to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaTEq1wAKCRBZ7Krx/gZQ
643uAQC1rRslhw5l7OjxEpIYbGG4M+QaadN4Nf5Sr2SuTRaPJQD/W4oj/u4C2eCw
Dd3q071tqyvm/PXNgN2EEnIaxlFUlwc=
=rKq+
-----END PGP SIGNATURE-----
Merge tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull persistent dentry infrastructure and conversion from Al Viro:
"Some filesystems use a kinda-sorta controlled dentry refcount leak to
pin dentries of created objects in dcache (and undo it when removing
those). A reference is grabbed and not released, but it's not actually
_stored_ anywhere.
That works, but it's hard to follow and verify; among other things, we
have no way to tell _which_ of the increments is intended to be an
unpaired one. Worse, on removal we need to decide whether the
reference had already been dropped, which can be non-trivial if that
removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag
(DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set
claims responsibility for +1 in refcount.
The end result this series is aiming for:
- get these unbalanced dget() and dput() replaced with new primitives
that would, in addition to adjusting refcount, set and clear
persistency flag.
- instead of having kill_litter_super() mess with removing the
remaining "leaked" references (e.g. for all tmpfs files that hadn't
been removed prior to umount), have the regular
shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries,
dropping the corresponding reference if it had been set. After that
kill_litter_super() becomes an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many
places in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary
pieces have already gone into mainline. This chunk is finally getting
to the meat of that stuff - infrastructure and most of the conversions
to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here"
* tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
d_make_discardable(): warn if given a non-persistent dentry
kill securityfs_recursive_remove()
convert securityfs
get rid of kill_litter_super()
convert rust_binderfs
convert nfsctl
convert rpc_pipefs
convert hypfs
hypfs: swich hypfs_create_u64() to returning int
hypfs: switch hypfs_create_str() to returning int
hypfs: don't pin dentries twice
convert gadgetfs
gadgetfs: switch to simple_remove_by_name()
convert functionfs
functionfs: switch to simple_remove_by_name()
functionfs: fix the open/removal races
functionfs: need to cancel ->reset_work in ->kill_sb()
functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}()
functionfs: don't abuse ffs_data_closed() on fs shutdown
convert selinuxfs
...
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251107153737.301413-2-marco.crivellari@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the open-coded dma_resv_lock()/dma_resv_unlock() around
dma_buf_unmap_attachment() in ffs_dmabuf_release() with the
dma_buf_unmap_attachment_unlocked() helper.
This aligns FunctionFS DMABUF unmap handling with the standard
DMA-BUF API, avoids duplicating locking logic and eases future
maintenance. No functional change.
Reviewed-by: fanggeng <fanggeng@lixiang.com>
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Link: https://patch.msgid.link/20251114084246.2064845-1-buaajxlj@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All files are regular; ep0 is there all along, other ep* may appear
and go away during the filesystem lifetime; all of those are guaranteed
to be gone by the time we umount it.
Object creation is in ffs_sb_create_file(), removals - at ->kill_sb()
time (for ep0) or by simple_remove_by_name() from ffs_epfiles_destroy()
(for the rest of them).
Switch ffs_sb_create_file() to simple_start_creating()/d_make_persistent()/
simple_done_creating() and that's it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
No need to return dentry from ffs_sb_create_file() or keep it around
afterwards.
To avoid subtle issues with getting to ffs from epfiles in
ffs_epfiles_destroy(), pass the superblock as explicit argument.
Callers have it anyway.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ffs_epfile_open() can race with removal, ending up with file->private_data
pointing to freed object.
There is a total count of opened files on functionfs (both ep0 and
dynamic ones) and when it hits zero, dynamic files get removed.
Unfortunately, that removal can happen while another thread is
in ffs_epfile_open(), but has not incremented the count yet.
In that case open will succeed, leaving us with UAF on any subsequent
read() or write().
The root cause is that ffs->opened is misused; atomic_dec_and_test() vs.
atomic_add_return() is not a good idea, when object remains visible all
along.
To untangle that
* serialize openers on ffs->mutex (both for ep0 and for dynamic files)
* have dynamic ones use atomic_inc_not_zero() and fail if we had
zero ->opened; in that case the file we are opening is doomed.
* have the inodes of dynamic files marked on removal (from the
callback of simple_recursive_removal()) - clear ->i_private there.
* have open of dynamic ones verify they hadn't been already removed,
along with checking that state is FFS_ACTIVE.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... otherwise we just might free ffs with ffs->reset_work
still on queue. That needs to be done after ffs_data_reset() -
that's the cutoff point for configfs accesses (serialized
on gadget_info->lock), which is where the schedule_work()
would come from.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A reference is held by the superblock (it's dropped in ffs_kill_sb())
and filesystem will not get to ->kill_sb() while there are any opened
files, TYVM...
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ffs_data_closed() has a seriously confusing logics in it: in addition
to the normal "decrement a counter and do some work if it hits zero"
there's "... and if it has somehow become negative, do that" bit.
It's not a race, despite smelling rather fishy. What really happens
is that in addition to "call that on close of files there, to match
the increments of counter on opens" there's one call in ->kill_sb().
Counter starts at 0 and never goes negative over the lifetime of
filesystem (or we have much worse problems everywhere - ->release()
call of some file somehow unpaired with successful ->open() of the
same). At the filesystem shutdown it will be 0 or, again, we have
much worse problems - filesystem instance destroyed with files on it
still open. In other words, at that call and at that call alone
the decrement would go from 0 to -1, hitting that chunk (and not
hitting the "if it hits 0" part).
So that check is a weirdly spelled "called from ffs_kill_sb()".
Just expand the call in the latter and kill the misplaced chunk
in ffs_data_closed().
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It was
another normal development cycle, with lots of the usual drivers getting
updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective subsystem
maintainers, but you will get a merge conflict with the i2c tree where
new drivers were added in the same places in a Kconfig and Makefile.
The merge conflict is simple, just take both sides.
All of these have been in linux-next for a while, with the only issue
being the i2c tree merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOEo8Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynpOQCgkenJzjsGVHhl/tm447z3pQ8NtvQAn2GfxMF9
4jQlUtr6McyzCLVPOZRD
=pPei
-----END PGP SIGNATURE-----
Merge tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
-----BEGIN PGP SIGNATURE-----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=Fuey
-----END PGP SIGNATURE-----
Merge tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Added a new V4L2 clock helper
- New camera sensor drivers
- iris: Enable H.264/H.265 encoder support and fixes in iris driver
common code
- camss: add support for new SoC flavors
- venus: add new SoC support
- tc358743: support more infoframe types
- Various fixes, driver improvements and cleanups
* tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits)
media: venus: pm_helpers: add fallback for the opp-table
media: qcom: camss: vfe: Fix BPL alignment for QCM2290
media: tuner: xc5000: Fix use-after-free in xc5000_release
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
media: vsp1: Export missing vsp1_isp_free_buffer symbol
media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS()
media: renesas: ceu: Convert to RUNTIME_PM_OPS()
media: renesas: fdp1: Convert to RUNTIME_PM_OPS()
media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID
media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE
media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls
media: uvcvideo: Shorten the transfer size non compliance message
media: uvcvideo: Do not re-reference dev->udev
media: uvcvideo: Use intf instead of udev for printks
media: uvcvideo: Move video_device under video_queue
media: uvcvideo: Drop stream->mutex
media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQMQAKCRCRxhvAZXjc
omNLAQCgrwzd9sa1JTlixweu3OAxQlSEbLuMpEv7Ztm+B7Wz0AD9HtwPC44Kev03
GbMcB2DCFLC4evqYECj6IG7NBmoKsAs=
=1ICf
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add "initramfs_options" parameter to set initramfs mount options.
This allows to add specific mount options to the rootfs to e.g.,
limit the memory size
- Add RWF_NOSIGNAL flag for pwritev2()
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
signal from being raised when writing on disconnected pipes or
sockets. The flag is handled directly by the pipe filesystem and
converted to the existing MSG_NOSIGNAL flag for sockets
- Allow to pass pid namespace as procfs mount option
Ever since the introduction of pid namespaces, procfs has had very
implicit behaviour surrounding them (the pidns used by a procfs
mount is auto-selected based on the mounting process's active
pidns, and the pidns itself is basically hidden once the mount has
been constructed)
This implicit behaviour has historically meant that userspace was
required to do some special dances in order to configure the pidns
of a procfs mount as desired. Examples include:
* In order to bypass the mnt_too_revealing() check, Kubernetes
creates a procfs mount from an empty pidns so that user
namespaced containers can be nested (without this, the nested
containers would fail to mount procfs)
But this requires forking off a helper process because you cannot
just one-shot this using mount(2)
* Container runtimes in general need to fork into a container
before configuring its mounts, which can lead to security issues
in the case of shared-pidns containers (a privileged process in
the pidns can interact with your container runtime process)
While SUID_DUMP_DISABLE and user namespaces make this less of an
issue, the strict need for this due to a minor uAPI wart is kind
of unfortunate
Things would be much easier if there was a way for userspace to
just specify the pidns they want. So this pull request contains
changes to implement a new "pidns" argument which can be set
using fsconfig(2):
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
Cleanups:
- Remove the last references to EXPORT_OP_ASYNC_LOCK
- Make file_remove_privs_flags() static
- Remove redundant __GFP_NOWARN when GFP_NOWAIT is used
- Use try_cmpxchg() in start_dir_add()
- Use try_cmpxchg() in sb_init_done_wq()
- Replace offsetof() with struct_size() in ioctl_file_dedupe_range()
- Remove vfs_ioctl() export
- Replace rwlock() with spinlock in epoll code as rwlock causes
priority inversion on preempt rt kernels
- Make ns_entries in fs/proc/namespaces const
- Use a switch() statement() in init_special_inode() just like we do
in may_open()
- Use struct_size() in dir_add() in the initramfs code
- Use str_plural() in rd_load_image()
- Replace strcpy() with strscpy() in find_link()
- Rename generic_delete_inode() to inode_just_drop() and
generic_drop_inode() to inode_generic_drop()
- Remove unused arguments from fcntl_{g,s}et_rw_hint()
Fixes:
- Document @name parameter for name_contains_dotdot() helper
- Fix spelling mistake
- Always return zero from replace_fd() instead of the file descriptor
number
- Limit the size for copy_file_range() in compat mode to prevent a
signed overflow
- Fix debugfs mount options not being applied
- Verify the inode mode when loading it from disk in minixfs
- Verify the inode mode when loading it from disk in cramfs
- Don't trigger automounts with RESOLVE_NO_XDEV
If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
through automounts, but could still trigger them
- Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
tracepoints
- Fix unused variable warning in rd_load_image() on s390
- Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD
- Use ns_capable_noaudit() when determining net sysctl permissions
- Don't call path_put() under namespace semaphore in listmount() and
statmount()"
* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
fcntl: trim arguments
listmount: don't call path_put() under namespace semaphore
statmount: don't call path_put() under namespace semaphore
pid: use ns_capable_noaudit() when determining net sysctl permissions
fs: rename generic_delete_inode() and generic_drop_inode()
init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
initramfs: Replace strcpy() with strscpy() in find_link()
initrd: Use str_plural() in rd_load_image()
initramfs: Use struct_size() helper to improve dir_add()
initrd: Fix unused variable warning in rd_load_image() on s390
fs: use the switch statement in init_special_inode()
fs/proc/namespaces: make ns_entries const
filelock: add FL_RECLAIM to show_fl_flags() macro
eventpoll: Replace rwlock with spinlock
selftests/proc: add tests for new pidns APIs
procfs: add "pidns" mount option
pidns: move is-ancestor logic to helper
openat2: don't trigger automounts with RESOLVE_NO_XDEV
namei: move cross-device check to __traverse_mounts
namei: remove LOOKUP_NO_XDEV check from handle_mounts
...
Kuen-Han Tsai <khtsai@google.com> says:
This patch series refactors the error-handling paths in the bind()
function for f_ncm, f_acm, f_ecm, and f_rndis drivers.
The current, unified goto logic in these drivers is vulnerable to a null
pointer dereference. This is caused by the cleanup logic incorrectly
handling the stale usb_request pointer after a bind/unbind cycle. This
series fixes this issue by converting the drivers to use the modern
__free() scope-based cleanup mechanism.
Patches 1-2 are preparatory, adding the endpoint pointer to struct
usb_request and defining helpers for the __free() cleanup. The remaining
four patches use this new plumbing to refactor each driver.
Future work
-----------
1. Refactor usb_ep_free_request(), usb_ep_queue(), and usb_ep_dequeue()
functions as the ep parameter becomes redudant.
2. Convert the remaining gadget function drivers to use the new __free()
cleanup mechanism.
Link: https://lore.kernel.org/r/20250916-ready-v1-0-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After an bind/unbind cycle, the rndis->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Fixes: 45fe3b8e53 ("usb ethernet gadget: split RNDIS function")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-6-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-6-4997bf277548@google.com
After an bind/unbind cycle, the ecm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Fixes: da741b8c56 ("usb ethernet gadget: split CDC Ethernet function")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-5-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-5-4997bf277548@google.com
After an bind/unbind cycle, the acm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
gs_free_req+0x30/0x44
acm_bind+0x1b8/0x1f4
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
Fixes: 1f1ba11b64 ("usb gadget: issue notifications from ACM function")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-4-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-4-4997bf277548@google.com
After an bind/unbind cycle, the ncm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
ncm_bind+0x39c/0x3dc
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
Fixes: 9f6ce4240a ("usb: gadget: f_ncm.c added")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-3-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-3-4997bf277548@google.com
A race condition occurs when ffs_func_eps_enable() runs concurrently
with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset()
sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading
to a NULL pointer dereference when accessing epfile->ep in
ffs_func_eps_enable() after successful usb_ep_enable().
The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and
ffs_data_close() functions, and its modification is protected by the
spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function
is also protected by ffs->eps_lock.
Thus, add NULL pointer handling for ffs->epfiles in the
ffs_func_eps_enable() function to fix issues
Signed-off-by: Owen Gu <guhuinan@xiaomi.com>
Link: https://lore.kernel.org/r/20250915092907.17802-1-guhuinan@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generic_delete_inode() is rather misleading for what the routine is
doing. inode_just_drop() should be much clearer.
The new naming is inconsistent with generic_drop_inode(), so rename that
one as well with inode_ as the suffix.
No functional changes.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The EP-IN of MIDI2 (altset 1) wasn't initialized in
f_midi2_create_usb_configs() as it's an INT EP unlike others BULK
EPs. But this leaves rather the max packet size unchanged no matter
which speed is used, resulting in the very slow access.
And the wMaxPacketSize values set there look legit for INT EPs, so
let's initialize the MIDI2 EP-IN there for achieving the equivalent
speed as well.
Fixes: 8b645922b2 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250905133240.20966-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gadget card driver forgot to call snd_ump_update_group_attrs()
after adding FBs, and this leaves the UMP group attributes
uninitialized. As a result, -ENODEV error is returned at opening a
legacy rawmidi device as an inactive group.
This patch adds the missing call to address the behavior above.
Fixes: 8b645922b2 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250904153932.13589-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the hid req->zero flag of ep0/in_ep to true by default,
then the UDC drivers can transfer a zero length packet at
the end if the hid transfer with size divisible to EPs max
packet size according to the USB 2.0 spec.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Link: https://lore.kernel.org/r/1756204087-26111-1-git-send-email-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fix is already present in f_ecm.c and was never
propagated to f_ncm.c
When creating multiple NCM ethernet devices
on a composite usb gadget device
each MAC address on the HOST side will be identical.
Having the same MAC on different network interfaces is bad.
This fix updates the MAC address inside the
ncm_strings_defs global during the ncm_bind call.
This ensures each device has a unique MAC.
In f_ecm.c ecm_string_defs is updated in the same way.
The defunct MAC assignment in ncm_alloc has been removed.
Signed-off-by: raub camaioni <raubcameo@gmail.com>
Link: https://lore.kernel.org/r/20250815131358.1047525-1-raubcameo@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Multiple drivers that use v4l2_fh and call v4l2_fh_del() manually reset
the file->private_data pointer to NULL in their video device .release()
file operation handler. Move the code to the v4l2_fh_del() function to
avoid direct access to file->private_data in drivers. This requires
adding a file pointer argument to the function.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- filp->private_data = NULL;
...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...
- filp->private_data = NULL;
...>
}
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}
Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_del() prototype and reset file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_del() function prototype
and its documentation.
Additionally, white space issues have been fixed manually in
drivers/usb/gadget/function/uvc_v4l2.c
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
All the drivers that use v4l2_fh and call v4l2_fh_add() manually store a
pointer to the v4l2_fh instance in file->private_data in their video
device .open() file operation handler. Move the code to the
v4l2_fh_add() function to avoid direct access to file->private_data in
drivers. This requires adding a file pointer argument to the function.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- filp->private_data = fh;
...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...>
}
@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...
- filp->private_data = fh;
...>
}
Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_add() prototype set file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_add() function prototype
and its documentation.
Additionally, white space issues have been fixed manually in
drivers/media/platform/nvidia/tegra-vde/v4l2.c,
drivers/media/platform/rockchip/rkvdec/rkvdec.c,
drivers/media/v4l2-core/v4l2-fh.c and
drivers/staging/most/video/video.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Accessing file->private_data manually to retrieve the v4l2_fh pointer is
error-prone, as the field is a void * and will happily cast implicitly
to any pointer type.
Replace all remaining locations that read the v4l2_fh pointer directly
from file->private_data with usage of the file_to_v4l2_fh() function.
The change was generated manually.
No functional change is intended, this only paves the way to remove
direct accesses to file->private_data and make V4L2 drivers safer.
Other accesses to the field will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Here is the big set of USB and Thunderbolt driver changes for 6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates, no
major new features this development cycle. Stuff included in here is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are "obviously
correct" :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeVLw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn3RACgg394VU3ENwqvkh1iF95fVwVheJYAn08YUeoM
98vPdogv4+kuC3B0TbiM
=7pfy
-----END PGP SIGNATURE-----
Merge tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates,
no major new features this development cycle. Stuff included in here
is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are
'obviously correct' :)"
* tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (100 commits)
usb: musb: omap2430: clean up probe error handling
usb: musb: omap2430: fix device leak at unbind
usb: gadget: udc: renesas_usb3: fix device leak at unbind
usb: dwc3: meson-g12a: fix device leaks at unbind
usb: dwc3: imx8mp: fix device leak at unbind
usb: musb: omap2430: enable compile testing
usb: gadget: udc: renesas_usb3: drop unused module alias
usb: xhci: print xhci->xhc_state when queue_command failed
usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init()
USB: serial: option: add Foxconn T99W709
usb: core: add urb->sgt parameter description
thunderbolt: Fix copy+paste error in match_service_id()
usb: typec: ucsi: Update power_supply on power role change
usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
usb: typec: fusb302: cache PD RX state
usb: typec: ucsi: yoga-c630: add DRM dependency
usb: gadget : fix use-after-free in composite_dev_cleanup()
usb: chipidea: imx: Add a missing blank line
usb: gadget: f_uac1: replace scnprintf() with sysfs_emit()
usb: usblp: clean up assignment inside if conditions
...
places; unfortunately, it's easy to get wrong. A number of open-coded
attempts are out there, with varying amount of bogosities.
simple_recursive_removal() had been introduced for doing that with
all precautions needed; it does an equivalent of rm -rf, with sufficient
locking, eviction of anything mounted on top of the subtree, etc.
This series converts a bunch of open-coded instances to using that.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaIRCUwAKCRBZ7Krx/gZQ
66XWAP9BNyHcvl9uV/ku/mswYiRBxYoVogciIKeugwYTVLuTJgEA7jdh1eyLkvbS
rwbL7XD+Q35/vXZHEet+RLCGH3ae6wc=
=yaKF
-----END PGP SIGNATURE-----
Merge tag 'pull-simple_recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull simple_recursive_removal() update from Al Viro:
"Removing subtrees of kernel filesystems is done in quite a few places;
unfortunately, it's easy to get wrong. A number of open-coded attempts
are out there, with varying amount of bogosities.
simple_recursive_removal() had been introduced for doing that with all
precautions needed; it does an equivalent of rm -rf, with sufficient
locking, eviction of anything mounted on top of the subtree, etc.
This series converts a bunch of open-coded instances to using that"
* tag 'pull-simple_recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
functionfs, gadgetfs: use simple_recursive_removal()
kill binderfs_remove_file()
fuse_ctl: use simple_recursive_removal()
pstore: switch to locked_recursive_removal()
binfmt_misc: switch to locked_recursive_removal()
spufs: switch to locked_recursive_removal()
add locked_recursive_removal()
better lockdep annotations for simple_recursive_removal()
simple_recursive_removal(): saner interaction with fsnotify
Documentation/filesystems/sysfs.rst mentions that show() should only
use sysfs_emit() or sysfs_emit_at() when formating the value to be
returned to user space. So replace scnprintf() with sysfs_emit().
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://lore.kernel.org/r/20250718175037.299710-1-sumanth.gavini@yahoo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/filesystems/sysfs.rst mentions that show() should only
use sysfs_emit() or sysfs_emit_at() when formating the value to be
returned to user space. So replace scnprintf() with sysfs_emit().
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://lore.kernel.org/r/20250704003425.467299-1-sumanth.gavini@yahoo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 24729b307e ("usb: gadget: f_fs: Fix race between aio_cancel()
and AIO request complete") moved the call to usb_ep_free_request() from
ffs_epfile_async_io_complete() to ffs_user_copy_worker().
In ffs_user_copy_worker(), ki_complete() is called before
usb_ep_free_request(). Once ki_complete() returns, ffs_aio_cancel() can
no longer be invoked for the completed kiocb, as ki_complete() removes it
from the &ctx->active_reqs list in aio.c. ffs_aio_cancel() only applies
to kiocb instances still present on this list.
The potential race between ki_complete() and ffs_aio_cancel() is already
guarded by the &ctx->ctx_lock spinlock in aio.c.
As a result, there is no race condition between the usb_ep_dequeue() call
in ffs_aio_cancel() and the usb_ep_free_request() call in
ffs_user_copy_worker(). Consequently, the spin lock/unlock operations on
&io_data->ffs->eps_lock are no longer necessary.
Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com>
Link: https://lore.kernel.org/r/20250701113602.33402-2-ingo.rohloff@lauterbach.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In hidg_bind(), if alloc_workqueue() fails after usb_assign_descriptors()
has successfully allocated the USB descriptors, the current error handling
does not call usb_free_all_descriptors() to free the allocated descriptors,
resulting in a memory leak.
Restructure the error handling by adding proper cleanup labels:
- fail_free_all: cleans up workqueue and descriptors
- fail_free_descs: cleans up descriptors only
- fail: original cleanup for earlier failures
This ensures that allocated resources are properly freed in reverse order
of their allocation, preventing the memory leak when alloc_workqueue() fails.
Fixes: a139c98f76 ("USB: gadget: f_hid: Add GET_REPORT via userspace IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Yuhao Jiang <danisjiang@gmail.com>
Link: https://lore.kernel.org/r/20250623094844.244977-1-danisjiang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the USB fixes in here as well to build on top of for other
changes that depend on them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usual mount leaks if something had been bound on top of disappearing
files there.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There is no need to check if "port" is NULL. We already verified that it
is non-NULL. It's a stack variable and can't be modified by a different
thread. Delete this dead code.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/685c1413.050a0220.1a8223.d0b9@mx.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A race condition occurs when gs_start_io() calls either gs_start_rx() or
gs_start_tx(), as those functions briefly drop the port_lock for
usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear
port.tty and port_usb, respectively.
Use the null-safe TTY Port helper function to wake up TTY.
Example
CPU1: CPU2:
gserial_connect() // lock
gs_close() // await lock
gs_start_rx() // unlock
usb_ep_queue()
gs_close() // lock, reset port.tty and unlock
gs_start_rx() // lock
tty_wakeup() // NPE
Fixes: 35f95fd7f2 ("TTY: usb/u_serial, use tty from tty_port")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Reviewed-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/linux-usb/20240116141801.396398-1-khtsai@google.com/
Link: https://lore.kernel.org/r/20250617050844.1848232-2-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ffd603f214.
Commit ffd603f214 ("usb: gadget: u_serial: Add null pointer check in
gs_start_io") adds null pointer checks at the beginning of the
gs_start_io() function to prevent a null pointer dereference. However,
these checks are redundant because the function's comment already
requires callers to hold the port_lock and ensure port.tty and port_usb
are not null. All existing callers already follow these rules.
The true cause of the null pointer dereference is a race condition. When
gs_start_io() calls either gs_start_rx() or gs_start_tx(), the port_lock
is temporarily released for usb_ep_queue(). This allows port.tty and
port_usb to be cleared.
Fixes: ffd603f214 ("usb: gadget: u_serial: Add null pointer check in gs_start_io")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Reviewed-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250617050844.1848232-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the function usb_endpoint_num() rather than constants.
The Coccinelle semantic patch is as follows:
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bEndpointAddress & \(USB_ENDPOINT_NUMBER_MASK\|0x0f\))
+ usb_endpoint_num(epd)
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250618070216.817034-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices. I think this takes the
record for the most number of patch series (30+) over the longest
period of time (2+ years) to get merged properly. Many props go to
Wesley Cheng for seeing this effort through, they took a major
out-of-tree hacked-up-monstrosity that was created by multiple
vendors for their specific devices, got it all merged into a
semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees. This feature offers major power savings on embedded
devices where a USB audio stream can continue to flow while the rest
of the system is sleeping, something that devices running on battery
power really care about. There are still some more small tweaks
left to be done here, and those patches are still out for review and
arguing among the different hardware companies, but this is a major
step forward and a great example of how to do upstream development
well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added for
the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaEKnpA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym3zQCgz+Oz3DHfLcYOX7evGI2PjI4GNMkAoJa6Kndw
h4YgL+8MeBpKuHCQvxy8
=KVAn
-----END PGP SIGNATURE-----
Merge tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
-----BEGIN PGP SIGNATURE-----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=qI/U
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2025060301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for Apple Magic Mouse 2 USB-C (Aditya Garg)
- power management improvement for multitouch devices (Werner Sembach)
- fix for ACPI initialization in intel-thc driver (Wentao Guan)
- adaptation of HID drivers to use new gpio_chip's line setter
callbacks (Bartosz Golaszewski)
- fix potential OOB in usbhid_parse() (Terry Junge)
- make it possible to set hid_mouse_ignore_list dynamically (the same
way we handle other quirks) (Aditya Garg)
- other small assorted fixes and device ID additions
* tag 'hid-for-linus-2025060301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Disable touchpad on firmware level while not in use
HID: core: Add functions for HID drivers to react on first open and last close call
HID: HID_APPLETB_BL should depend on X86
HID: HID_APPLETB_KBD should depend on X86
HID: appletb-kbd: Use secs_to_jiffies() instead of msecs_to_jiffies()
HID: intel-thc-hid: intel-thc: make read-only arrays static const
HID: magicmouse: Apple Magic Mouse 2 USB-C support
HID: mcp2221: use new line value setter callbacks
HID: mcp2200: use new line value setter callbacks
HID: cp2112: use new line value setter callbacks
HID: cp2112: use lock guards
HID: cp2112: hold the lock for the entire direction_output() call
HID: cp2112: destroy mutex on driver detach
HID: intel-thc-hid: intel-quicki2c: pass correct arguments to acpi_evaluate_object
HID: corsair-void: Use to_delayed_work()
HID: hid-logitech: use sysfs_emit_at() instead of scnprintf()
HID: quirks: Add HID_QUIRK_IGNORE_MOUSE quirk
HID: usbhid: Eliminate recurrent out-of-bounds bug in usbhid_parse()
HID: Kysona: Add periodic online check
In struct usb_function, the struct usb_function_instance pointer
variable "fi" is listed as const, but it is written to in numerous
places, making the const marking of it a total lie. Fix this up by just
removing the const pointer attribute as this is modified in numerous
places.
Link: https://lore.kernel.org/r/2025052145-undress-puma-f7cf@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid unlocking serial_port_lock twice in gserial_suspend(), this can
occur if gserial_wakeup_host() fails. And since wakeup is performed
outside spinlock, check if the port is valid before proceeding again.
Fixes: 3baea29dc0 ("usb: gadget: u_serial: Implement remote wakeup capability")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aBHatifO5bjR1yPt@stanley.mountain/
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250506104912.3750934-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A handful small fixes. The only significant change is the fix for
MIDI 2.0 UMP handling in ALSA sequencer, but as MIDI 2.0 stuff is
still new and rarely used, the impact should be pretty limited.
Other than that, quirks for USB-audio and a few cosmetic fixes and
changes in drivers that should be safe to apply.
-----BEGIN PGP SIGNATURE-----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=kbgJ
-----END PGP SIGNATURE-----
Merge tag 'sound-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A handful small fixes. The only significant change is the fix for MIDI
2.0 UMP handling in ALSA sequencer, but as MIDI 2.0 stuff is still new
and rarely used, the impact should be pretty limited.
Other than that, quirks for USB-audio and a few cosmetic fixes and
changes in drivers that should be safe to apply"
* tag 'sound-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add sample rate quirk for Microdia JP001 USB Camera
ALSA: es1968: Add error handling for snd_pcm_hw_constraint_pow2()
ALSA: sh: SND_AICA should depend on SH_DMA_API
ALSA: usb-audio: Add sample rate quirk for Audioengine D1
ALSA: ump: Fix a typo of snd_ump_stream_msg_device_info
ALSA/hda: intel-sdw-acpi: Correct sdw_intel_acpi_scan() function parameter
ALSA: seq: Fix delivery of UMP events to group ports
s/devince/device/
It's used only internally, so no any behavior changes.
Fixes: 37e0e14128 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250511141147.10246-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When host sends GET_STATUS to ECM interface, handle the request
from the function driver. Since the interface is wakeup capable,
set the corresponding bit, and set RW bit if the function is
already armed for wakeup by the host.
Cc: stable <stable@kernel.org>
Fixes: 481c225c48 ("usb: gadget: Handle function suspend feature selector")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250422103231.1954387-2-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch enhances the HID gadget driver to support dynamic configuration
of the interrupt polling interval (bInterval) via configfs. A new
‘interval’ attribute is exposed under each HID function’s configfs
directory, and any write to it will adjust the poll rate for all endpoints
without requiring a rebuild.
When the attribute has never been written, legacy defaults are preserved:
• Full-Speed (FS) endpoints (IN & OUT) poll every 10 ms
• High-Speed (HS) endpoints (IN & OUT) poll every 4 micro-frames
(~1 ms)
To implement this cleanly:
• Add two new fields to f_hid_opts and f_hidg:
– unsigned char interval
– bool interval_user_set
• Introduce dedicated f_hid_opts_interval_show/store functions.
The store routine parses into an unsigned int, bounds‐checks,
assigns to opts->interval, and sets opts->interval_user_set = true.
• Initialize opts->interval = 4 and opts->interval_user_set = false in
hidg_alloc_inst(), then copy both into the live f_hidg instance in
hidg_alloc().
• In hidg_bind(), set each endpoint’s bInterval based on whether the
user has written the attribute:
– If interval_user_set == false, use FS=10 / HS=4
– If interval_user_set == true, use the user’s value for both FS
& HS
Signed-off-by: Ben Hoff <hoff.benjamin.k@gmail.com>
Link: https://lore.kernel.org/r/20250429182809.811786-1-hoff.benjamin.k@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the remote wakeup capability for u_serial. The newly added
function gserial_wakeup_host() wakes up the host when there is some
data to be sent while the device is suspended. Add gser_get_status()
callbacks to advertise f_serial interface as function wakeup capable.
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250424121142.4180241-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update struct hid_descriptor to better reflect the mandatory and
optional parts of the HID Descriptor as per USB HID 1.11 specification.
Note: the kernel currently does not parse any optional HID class
descriptors, only the mandatory report descriptor.
Update all references to member element desc[0] to rpt_desc.
Add test to verify bLength and bNumDescriptors values are valid.
Replace the for loop with direct access to the mandatory HID class
descriptor member for the report descriptor. This eliminates the
possibility of getting an out-of-bounds fault.
Add a warning message if the HID descriptor contains any unsupported
optional HID class descriptors.
Reported-by: syzbot+c52569baf0c843f35495@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c52569baf0c843f35495
Fixes: f043bfc98c ("HID: usbhid: fix out-of-bounds bug")
Cc: stable@vger.kernel.org
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The variable tpgt in usbg_make_tpg() is defined as unsigned long and is
assigned to tpgt->tport_tpgt, which is defined as u16. This may cause an
integer overflow when tpgt is greater than USHRT_MAX (65535). I
haven't tried to trigger it myself, but it is possible to trigger it
by calling usbg_make_tpg() with a large value for tpgt.
I modified the type of tpgt to match tpgt->tport_tpgt and adjusted the
relevant code accordingly.
This patch is similar to commit 59c816c1f2 ("vhost/scsi: potential
memory corruption").
Signed-off-by: Chen Yufeng <chenyufeng@iie.ac.cn>
Link: https://lore.kernel.org/r/20250415065857.1619-1-chenyufeng@iie.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to how it is done in the write path.
Add a disabled flag to track the function state and use it to exit the read
loops to ensure no readers get stuck when the function is disabled/unbound,
protecting against corruption when the waitq and spinlocks are reinitialized
in hidg_bind().
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20250318152207.330997-1-peter@korsgaard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice
that `struct uvc_input_header_descriptor` is a flexible structure --a
structure that contains a flexible-array member.
With this, fix three of the following warnings:
drivers/usb/gadget/function/uvc_configfs.h:77:57: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/Z9dyY7_ydJiGqh_d@kspp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of USB and Thunderbolt driver updates for 6.15-rc1.
Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+2Zaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynIgQCaAyMozdrZtTiOs1OcZEuTkoCtKrEAniqe0OiL
s7R6j2NoOIwo9d6hBsjh
=IH7I
-----END PGP SIGNATURE-----
Merge tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash. The only non-trivial core change
is an addition to unit attention handling to recognize UAs for power
on/reset and new media so the tape driver can use it.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ+RQ2yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe6DAQCdW/21
S1Y6BDlJLQfpWChGv6GIzanC+5sMfylw4d6ULgEA8upOE5L3fC29IY958jXig0o1
uLjxylwYEfVLDf8gwJ0=
=mkM+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash.
The only non-trivial core change is an addition to unit attention
handling to recognize UAs for power on/reset and new media so the tape
driver can use it"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
scsi: st: Tighten the page format heuristics with MODE SELECT
scsi: st: ERASE does not change tape location
scsi: st: Fix array overflow in st_setup()
scsi: target: tcm_loop: Fix wrong abort tag
scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
scsi: hisi_sas: Fixed failure to issue vendor specific commands
scsi: fnic: Remove unnecessary NUL-terminations
scsi: fnic: Remove redundant flush_workqueue() calls
scsi: core: Use a switch statement when attaching VPD pages
scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
scsi: ufs: renesas: Add reusable functions
scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
scsi: ufs: renesas: Remove register control helper function
scsi: ufs: renesas: Add register read to remove save/set/restore
scsi: ufs: renesas: Replace init data by init code
scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
scsi: mpi3mr: Task Abort EH Support
scsi: storvsc: Don't report the host packet status as the hv status
scsi: isci: Make most module parameters static
scsi: megaraid_sas: Make most module parameters static
...
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the upcoming
Rust integration and is obviously a silly implementation to begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member.
-----BEGIN PGP SIGNATURE-----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=bYAX
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
Currently while UDC suspends, u_ether attempts to remote wakeup
the host if there are any pending transfers. However, if remote
wakeup fails, the UDC remains suspended but the is_suspend flag
is not set. And since is_suspend flag isn't set, the subsequent
eth_start_xmit() would queue USB requests to suspended UDC.
To fix this, bail out from gether_suspend() only if remote wakeup
operation is successful.
Cc: stable <stable@kernel.org>
Fixes: 0a1af6dfa0 ("usb: gadget: f_ecm: Add suspend/resume and remote wakeup support")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250212100840.3812153-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/7239d6211ffb0dff6351d0549d065277f2562793.1738746904.git.namcao@linutronix.de
The behaviour of kthread_create_worker() was recently changed to align
with the one of kthread_create(). The kthread worker is created but not
awaken by default. This is to allow the use of kthread_affine_preferred()
and kthread_bind[_mask]() with kthread workers. In order to keep the
old behaviour and wake the kthread up, kthread_run_worker() must be
used. All the pre-existing users have been converted, except for UVC
that was introduced in the same merge window as the API change.
This results in hangs:
INFO: task UVCG:82 blocked for more than 491 seconds.
Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1
task:UVCG state:D stack:0 pid:82
Call Trace:
__schedule
schedule
schedule_preempt_disabled
kthread
? kthread_flush_work
ret_from_fork
ret_from_fork_asm
entry_INT80_32
Fix this with converting UVCG kworker to the new API.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502121025.55bfa801-lkp@intel.com
Fixes: f0bbfbd16b ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue")
Cc: stable <stable@kernel.org>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20250212135514.30539-1-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The names RESERVE and RELEASE are not only used in <scsi/scsi_proto.h> but
also elsewhere in the kernel:
$ git grep -nHE 'define[[:blank:]]*(RESERVE|RELEASE)[[:blank:]]'
drivers/input/joystick/walkera0701.c:13:#define RESERVE 20000
drivers/s390/char/tape_std.h:56:#define RELEASE 0xD4 /* 3420 NOP, 3480 REJECT */
drivers/s390/char/tape_std.h:58:#define RESERVE 0xF4 /* 3420 NOP, 3480 REJECT */
Additionally, while the names of the symbolic constants RESERVE_10 and
RELEASE_10 include the command length, the command length is not included
in the RESERVE and RELEASE names. Address both issues by renaming the
RESERVE and RELEASE constants into RESERVE_6 and RELEASE_6 respectively.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250210205031.2970833-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While the MIDI jacks are configured correctly, and the MIDIStreaming
endpoint descriptors are filled with the correct information,
bNumEmbMIDIJack and bLength are set incorrectly in these descriptors.
This does not matter when the numbers of in and out ports are equal, but
when they differ the host will receive broken descriptors with
uninitialized stack memory leaking into the descriptor for whichever
value is smaller.
The precise meaning of "in" and "out" in the port counts is not clearly
defined and can be confusing. But elsewhere the driver consistently
uses this to match the USB meaning of IN and OUT viewed from the host,
so that "in" ports send data to the host and "out" ports receive data
from it.
Cc: stable <stable@kernel.org>
Fixes: c8933c3f79 ("USB: gadget: f_midi: allow a dynamic number of input and output ports")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250130195035.3883857-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current implementation sets the wMaxPacketSize of bulk in/out
endpoints to 1024 bytes at the end of the f_midi_bind function. However,
in cases where there is a failure in the first midi bind attempt,
consider rebinding. This scenario may encounter an f_midi_bind issue due
to the previous bind setting the bulk endpoint's wMaxPacketSize to 1024
bytes, which exceeds the ep->maxpacket_limit where configured dwc3 TX/RX
FIFO's maxpacket size of 512 bytes for IN/OUT endpoints in support HS
speed only.
Here the term "rebind" in this context refers to attempting to bind the
MIDI function a second time in certain scenarios. The situations where
rebinding is considered include:
* When there is a failure in the first UDC write attempt, which may be
caused by other functions bind along with MIDI.
* Runtime composition change : Example : MIDI,ADB to MIDI. Or MIDI to
MIDI,ADB.
This commit addresses this issue by resetting the wMaxPacketSize before
endpoint claim. And here there is no need to reset all values in the usb
endpoint descriptor structure, as all members except wMaxPacketSize and
bEndpointAddress have predefined values.
This ensures that restores the endpoint to its expected configuration,
and preventing conflicts with value of ep->maxpacket_limit. It also
aligns with the approach used in other function drivers, which treat
endpoint descriptors as if they were full speed before endpoint claim.
Fixes: 46decc82ff ("usb: gadget: unconditionally allocate hs/ss descriptor in bind operation")
Cc: stable@vger.kernel.org
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Link: https://lore.kernel.org/r/20250118060134.927-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/2fb746b8-31c4-44e0-bf7b-7a0758edf52a@xs4all.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-5-c8405df47c19@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set TARGET_SCF_ACK_KREF flag and allow f_tcm to take the BOT command
reference. A usb request may be canceled, the f_tcm knows this. Let it
decides if the command should be freed. This is the same as how the UAS
interface is done.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/e791c639e91b5d91a8787f5d6902e8c58f1dc172.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Handle target_core_fabric_ops TASK MANAGEMENT functions and their
response. If a TASK MANAGEMENT command is received, the driver will
interpret the function TMF_*, translate to TMR_*, and fire off a command
work executing target_submit_tmr(). On completion, it will handle the
TASK MANAGEMENT response through uasp_send_tm_response().
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/50339586e36509dadb9c208b3314530993e673b6.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
