dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA
topology information for the PCI device, such as single-socket boards
that don't expose device-to-node affinity. Passing -1 directly into
cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds
array read caught by UBSAN:
UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask *[1024]'
Fall back to cpu_online_mask when no NUMA node is available, rather than
assuming dev_to_node() always returns a valid node index.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221294
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Fixes: 728bbc6cbf ("scsi: mpt3sas: Affinity high iops queues IRQs to local node")
Signed-off-by: Ivy Lopez <skunkolee@gmail.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260825190313.24013-1-skunkolee@gmail.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
This patch series enables context analysis for the SCSI core and the UFS
driver. The advantages are as follows:
- The compiler (only Clang) verifies whether the lock and unlock calls match
what has been declared via __must_hold(), __acquires() or __releases().
This is useful for catching locking bugs in error paths.
- Support for __guarded_by() is enabled. If a member variable is annotated
with __guarded_by(lock), the compiler will issue a warning if that member
variable is accessed without holding 'lock'.
Additionally, a patch is included that suppresses KCSAN complaints about SCSI
host state changes.
More information about lock context analysis is available in the cover letter of
[PATCH v5 00/36] Compiler-Based Context- and Locking-Analysis
(https://lore.kernel.org/lkml/20251219154418.3592607-1-elver@google.com/).
Please consider this patch series for the next merge window.
Thanks,
Bart.
Link: https://patch.msgid.link/cover.1786142946.git.bvanassche@acm.org
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
_base_release_memory_pools() unconditionally frees every
ioc->pcie_sg_lookup[] entry, including ones the setup loop never
allocated after a partial failure, causing a "bad dma" warning on debug
kernels or a NULL pointer dereference otherwise.
Fixes: dbec4c9040 ("scsi: mpt3sas: lockless command submission")
Reported-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://patch.msgid.link/20260808151010.185603-1-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Both branches of the check return the same value, so the check has no
effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260723184538.3888637-31-ekffu200098@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Expose the IOC and board temperature sensors of LSI / Broadcom SAS HBAs
through hwmon. Readings come from MPI IO Unit Page 7 via the accessor added
in the preceding patch.
The same fields are exposed by Broadcom's userspace tooling through the
/dev/mpt[23]ctl ioctl path (typically root-only): IOCTemperature and
BoardTemperature in lsiutil; ROC and Controller in storcli. With this
driver, sensors(1) shows them unprivileged:
$ sensors mpt3sas-pci-0200
mpt3sas-pci-0200
Adapter: PCI adapter
IOC: +42.0°C
Each channel is gated independently by its *TemperatureUnits field through
is_visible(); cards that populate only one sensor expose only one input
file, and cards that populate neither do not register an hwmon device.
The hwmon code is gated directly on CONFIG_HWMON. IS_REACHABLE() is used
rather than IS_ENABLED() so that SCSI_MPT3SAS=y with HWMON=m still builds;
in that configuration, the sensors are not exposed (same pattern as i915
and xe).
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Louis Sautier <sautier.louis@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260630224922.2543096-3-sautier.louis@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add mpt3sas_config_get_iounit_pg7(), mirroring the existing iounit page
accessors. Used by the hwmon driver added in the following patch to read
the IOC and board temperatures.
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Louis Sautier <sautier.louis@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260630224922.2543096-2-sautier.louis@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning
option has been introduced. This warning is enabled by default and can
be used to catch .queuecommand() implementations that return another
value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch
that changes the return type of the .queuecommand() implementations from
'int' into 'enum scsi_qc_status'. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_ordered_workqueue() format the workqueue name instead of
calling scnprintf() explicitly. Compile-tested only.
Cc: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260106185655.2526800-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a new module parameter "command_retry_count" to control the number
of retries during device discovery and readiness checks, improving
reliability for slow or transient SAS/PCIe devices.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20251113153712.31850-6-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support to requeue SAS/PCIe topology change events when devices are
busy or not ready. Introduce delayed work with retry counters so events
are retried instead of dropped, improving device discovery by retrying
transient failures instead of dropping events.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510311720.NiDwRLwp-lkp@intel.com/
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20251113153712.31850-5-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce a new module parameter "issue_scsi_cmd_to_bringup_drive"
(default=1) which allows overriding the driver's behavior of issuing
SCSI TEST_UNIT_READY/START_UNIT commands to bring devices to READY state
during unblock.
Improve device discovery and I/O unblocking reliability by adding
robust device readiness checks and separate callback handling for
discovery I/O. This introduces new helper routines for SCSI command
execution and readiness determination, ensuring smoother recovery and
initialization for slow or transient devices.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510310924.crvtELzs-lkp@intel.com/
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20251113153712.31850-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus
assorted cleanups and fixes. The only core update is to sd.c and is
mostly cosmetic.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaN7vMhsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIXdXgD9HsCcnqb5KzHs0EMzy752KjHoHeS5Tg59
CkTZcpTFAfgBAJJIHo5AripQ0cqPqTzVEkhWbd9q277A3HLgu3NFcsWG
=seOt
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus
assorted cleanups and fixes.
The only core update is to sd.c and is mostly cosmetic"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits)
scsi: MAINTAINERS: Update FC element owners
scsi: mpt3sas: Update driver version to 54.100.00.00
scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate
scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE
scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()
scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate
scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate
scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate
scsi: ufs: dt-bindings: Document gear and rate limit properties
scsi: ufs: core: Fix data race in CPU latency PM QoS request handling
scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill()
scsi: storvsc: Remove redundant ternary operators
scsi: ufs: core: Change MCQ interrupt enable flow
scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl()
scsi: lpfc: Copyright updates for 14.4.0.11 patches
scsi: lpfc: Update lpfc version to 14.4.0.11
scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int
scsi: lpfc: Clean up extraneous phba dentries
...
Updated driver version to 54.100.00.00.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Message-Id: <20250922095113.281484-5-ranjan.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add handling for MPI26_SAS_NEG_LINK_RATE_22_5 in
_transport_convert_phy_link_rate(). This maps the new 22.5 Gbps
negotiated rate to SAS_LINK_RATE_22_5_GBPS, to get correct PHY link
speeds.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Message-Id: <20250922095113.281484-4-ranjan.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avoid unconditional IOCLogInfo prints for CONFIG_INVALID_PAGE. Log only
if MPT_DEBUG_REPLY is enabled or when loginfo represents other
errors. This reduces uncessary logging without losing useful error
reporting.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instances are passed struct block_device *bdev argument; the only thing
it is used for (if it's used in the first place) is bdev->bd_disk.
Might as well pass that in the first place...
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In _mpt3sas_fw_work() the fw_event reference is removed, it should also
be freed in all cases.
Fixes: 4318c73478 ("scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20250723153018.50518-1-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With the ATA error model, an NCQ command failure always triggers an abort
(termination) of all NCQ commands queued on the device. In such case, the
SAT or the host must handle the failed command according to the command
sense data and immediately retry all other NCQ commands that were aborted
due to the failed NCQ command.
For SAS HBAs controlled by the mpt3sas driver, NCQ command aborts are not
handled by the HBA SAT and sent back to the host, with an ioc log
information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code
PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function
_scsih_io_done() always forces a retry of commands terminated with the
status MPI2_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result
DID_SOFT_ERROR, regardless of the log_info for the command. This
correctly forces the retry of collateral NCQ abort commands, but with the
retry counter for the command being incremented. If a command to an ATA
device is subject to too many retries due to other NCQ commands failing
(e.g. read commands trying to access unreadable sectors), the collateral
NCQ abort commands may be terminated with an error as they run out of
retries. This violates the SAT specification and causes hard-to-debug
command errors.
Solve this issue by modifying the handling of the
MPI2_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an
ATA device and if the command loginfo indicates an NCQ collateral
abort. If that is the case, force the command retry using the SCSI result
DID_IMM_RETRY to avoid incrementing the command retry count.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250606052747.742998-3-dlemoal@kernel.org
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With W=1, gcc complains correctly:
mpt3sas_ctl.c: In function ‘mpt3sas_send_mctp_passthru_req’:
mpt3sas_ctl.c:2917:29: error: variable ‘mpi_reply’ set but not used [-Werror=unused-but-set-variable]
2917 | MPI2DefaultReply_t *mpi_reply;
| ^~~~~~~~~
Drop the unused assignment and variable.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250606-mpt3sas-v1-1-906ffe49fb6b@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash. The only non-trivial core change
is an addition to unit attention handling to recognize UAs for power
on/reset and new media so the tape driver can use it.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ+RQ2yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe6DAQCdW/21
S1Y6BDlJLQfpWChGv6GIzanC+5sMfylw4d6ULgEA8upOE5L3fC29IY958jXig0o1
uLjxylwYEfVLDf8gwJ0=
=mkM+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash.
The only non-trivial core change is an addition to unit attention
handling to recognize UAs for power on/reset and new media so the tape
driver can use it"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
scsi: st: Tighten the page format heuristics with MODE SELECT
scsi: st: ERASE does not change tape location
scsi: st: Fix array overflow in st_setup()
scsi: target: tcm_loop: Fix wrong abort tag
scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
scsi: hisi_sas: Fixed failure to issue vendor specific commands
scsi: fnic: Remove unnecessary NUL-terminations
scsi: fnic: Remove redundant flush_workqueue() calls
scsi: core: Use a switch statement when attaching VPD pages
scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
scsi: ufs: renesas: Add reusable functions
scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
scsi: ufs: renesas: Remove register control helper function
scsi: ufs: renesas: Add register read to remove save/set/restore
scsi: ufs: renesas: Replace init data by init code
scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
scsi: mpi3mr: Task Abort EH Support
scsi: storvsc: Don't report the host packet status as the hv status
scsi: isci: Make most module parameters static
scsi: megaraid_sas: Make most module parameters static
...
The "sz" argument in mpt3sas_check_cmd_timeout() is the number of u32, not
the number of bytes. We dump that many u32 values to dmesg. Passing the
number of bytes will lead to a read overflow. Divide by 4 to get the
correct value.
Fixes: c72be4b5bb ("scsi: mpt3sas: Add support for MCTP Passthrough commands")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/02b0d4ff-961c-49ae-921a-5cc469edf93c@stanley.mountain
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for memtostr*() checking that its source is marked as
nonstring, annotate the device strings accordingly.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Signed-off-by: Kees Cook <kees@kernel.org>
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> says:
This patch series adds support for the MCTP passthrough function over
the MPI interface for management commands. Also fix issue related to
task management handling during IOCTL timeout.
Link: https://lore.kernel.org/r/1739410016-27503-1-git-send-email-shivasharan.srikanteshwara@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The MPI specification defines support for sending MCTP management commands
as a passthrough function to the IOC. Add support for driver to discover
the IOC capability to support MCTP passthrough function. Driver will
support applications and kernel modules to send MPT commands containing the
MCTP passthrough request to firmware through an MPI request.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Link: https://lore.kernel.org/r/1739410016-27503-3-git-send-email-shivasharan.srikanteshwara@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Call mutex_unlock(&ioc->hostdiag_unlock_mutex) once from error paths
instead of twice.
This patch fixes the following Clang -Wthread-safety errors:
drivers/scsi/mpt3sas/mpt3sas_base.c:8085:2: error: mutex 'ioc->hostdiag_unlock_mutex' is not held on every path through here [-Werror,-Wthread-safety-analysis]
8085 | pci_cfg_access_unlock(ioc->pdev);
| ^
drivers/scsi/mpt3sas/mpt3sas_base.c:8019:2: note: mutex acquired here
8019 | mutex_lock(&ioc->hostdiag_unlock_mutex);
| ^
./include/linux/mutex.h:171:26: note: expanded from macro 'mutex_lock'
171 | #define mutex_lock(lock) mutex_lock_nested(lock, 0)
| ^
drivers/scsi/mpt3sas/mpt3sas_base.c:8085:2: error: mutex 'ioc->hostdiag_unlock_mutex' is not held on every path through here [-Werror,-Wthread-safety-analysis]
8085 | pci_cfg_access_unlock(ioc->pdev);
| ^
drivers/scsi/mpt3sas/mpt3sas_base.c:8019:2: note: mutex acquired here
8019 | mutex_lock(&ioc->hostdiag_unlock_mutex);
| ^
./include/linux/mutex.h:171:26: note: expanded from macro 'mutex_lock'
171 | #define mutex_lock(lock) mutex_lock_nested(lock, 0)
| ^
drivers/scsi/mpt3sas/mpt3sas_base.c:8087:2: error: releasing mutex 'ioc->hostdiag_unlock_mutex' that was not held [-Werror,-Wthread-safety-analysis]
8087 | mutex_unlock(&ioc->hostdiag_unlock_mutex);
| ^
Cc: Ranjan Kumar <ranjan.kumar@broadcom.com>
Fixes: c0767560b0 ("scsi: mpt3sas: Reload SBR without rebooting HBA")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250210203936.2946494-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
mpt3sas_config_get_manufacturing_pg7() and
mpt3sas_config_get_sas_device_pg1() were added as part of 2012's
commit f92363d123 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
but haven't been used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250127002851.113711-1-linux@treblig.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
'struct pci_error_handlers' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
39049 6429 112 45590 b216 drivers/scsi/aacraid/linit.o
After:
=====
text data bss dec hex filename
39113 6365 112 45590 b216 drivers/scsi/aacraid/linit.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/efdec8425981e10fc398fa2ac599c9c45d930561.1737318548.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (ufs, lpfc, fnic, qla2xx, mpi3mr) The
major core change is the renaming of the slave_ methods plus a bit of
constification. The rest are minor updates and fixes.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ5ZQKSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMdAQCyVlDZ
v/3EFCuC4U1l70mMu8t+F4RPvqYxM3QPCi5dDQEA751YN/kaqxeXZDqGUKCAOE3K
Nl4XFTfLEkDVrQFFqPc=
=9sV8
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, fnic, qla2xx, mpi3mr).
The major core change is the renaming of the slave_ methods plus a bit
of constification. The rest are minor updates and fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (103 commits)
scsi: fnic: Propagate SCSI error code from fnic_scsi_drv_init()
scsi: fnic: Test for memory allocation failure and return error code
scsi: fnic: Return appropriate error code from failure of scsi drv init
scsi: fnic: Return appropriate error code for mem alloc failure
scsi: fnic: Remove always-true IS_FNIC_FCP_INITIATOR macro
scsi: fnic: Fix use of uninitialized value in debug message
scsi: fnic: Delete incorrect debugfs error handling
scsi: fnic: Remove unnecessary else to fix warning in FDLS FIP
scsi: fnic: Remove extern definition from .c files
scsi: fnic: Remove unnecessary else and unnecessary break in FDLS
scsi: mpi3mr: Fix possible crash when setting up bsg fails
scsi: ufs: bsg: Set bsg_queue to NULL after removal
scsi: ufs: bsg: Delete bsg_dev when setting up bsg fails
scsi: st: Don't set pos_unknown just after device recognition
scsi: aic7xxx: Fix build 'aicasm' warning
scsi: Revert "scsi: ufs: core: Probe for EXT_IID support"
scsi: storvsc: Ratelimit warning logs to prevent VM denial of service
scsi: scsi_debug: Constify sdebug_driver_template
scsi: documentation: Corrections for struct updates
scsi: driver-api: documentation: Change what is added to docbook
...
Currently, the code does:
if (x == 0) {
x &= ~0x3;
x |= 0x1;
}
Zeroing bits 0 and 1 of a variable that is 0 is not necessary. So directly
set the variable to 1.
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Fixes: f92363d123 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20241212221817.78940-2-pmenzel@molgen.mpg.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Linux 5.15 logs the error below
mpt3sas_cm0: overriding NVDATA EEDPTagMode setting
on a Dell PowerEdge T440 with the card below.
5e:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 [1000:0097] (rev 02)
It’s not clear to a user what this error is about. As a first step to
improve this, add the values to the error message.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20241212221817.78940-1-pmenzel@molgen.mpg.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace all users of blk_mq_pci_map_queues with the more generic
blk_mq_map_hw_queues. This in preparation to retire
blk_mq_pci_map_queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20241202-refactor-blk-affinity-helpers-v6-5-27211e9c2cd5@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve naming consistency with the .sdev_prep() and .sdev_destroy()
methods by renaming .device_configure() into .sdev_configure().
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename .slave_alloc() into .sdev_init() and .slave_destroy() into
.sdev_destroy(). The new names make it clear that these are actions on
SCSI devices. Make this change in the SCSI core, SCSI drivers and also
in the ATA drivers. No functionality has been changed.
This patch has been created as follows:
* Change the text "slave_alloc" into "sdev_init" in all source files
except those in drivers/net/ and Documentation/.
* Change the text "slave_destroy" into "sdev_destroy" in all source
files except those in drivers/net/ and Documentation/.
* Rename lpfc_no_slave() into lpfc_no_sdev().
* Manually adjust whitespace where necessary to restore vertical
alignment (dc395x driver and include/linux/libata.h).
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
