The spi_write_then_read() reads 8 bytes starting from
DS1390_REG_SECONDS (== 0x01), so the last byte read would already
be part of the alarm (Tenths and Hundredths of Seconds) feature.
However 7 bytes are engouh -- seconds (0x01), minutes (0x02), hours (0x03),
day (0x04), date (0x05), month/century (0x06) and year (0x07).
Signed-off-by: Andreas Gabriel-Platschek <andi.platschek@gmail.com>
Link: https://patch.msgid.link/20260209053439.313825-1-andi.platschek@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In __devm_rtc_register_device(), the callee rtc_initialize_alarm()
will check the alarm, there is no need to check in advance,
so remove it.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20260122090031.3871746-1-ruanjinjie@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Commit 795cda8338 ("rtc: interface: Fix long-standing race when setting
alarm") should not discard any errors from the preceding validations.
Prior to that commit, if the alarm feature was disabled, or the
set_alarm failed, a meaningful error code would be returned to the
caller for further action.
After, more often than not, the __rtc_read_time will cause a success
return code instead, misleading the caller.
An example of this is when timer_enqueue is called for a rtc-abx080x
device. Since that driver does not clear the alarm feature bit, but
instead relies on the set_alarm operation to return invalid, the discard
of the return code causes very different behaviour; i.e.
hwclock: select() to /dev/rtc0 to wait for clock tick timed out
Fixes: 795cda8338 ("rtc: interface: Fix long-standing race when setting alarm")
Signed-off-by: Anthony Pighin (Nokia) <anthony.pighin@nokia.com>
Reviewed-by: Esben Haabendal <esben@geanix.com>
Tested-by: Nick Bowler <nbowler@draconx.ca>
Link: https://patch.msgid.link/BN0PR08MB6951415A751F236375A2945683D1A@BN0PR08MB6951.namprd08.prod.outlook.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-----BEGIN PGP SIGNATURE-----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=ZT9I
-----END PGP SIGNATURE-----
Merge tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (28 commits)
Revert "clk: microchip: core: allow driver to be compiled with COMPILE_TEST"
Revert "clk: microchip: fix typo in reference to a config option"
MIPS: Implement ARCH_HAS_CC_CAN_LINK
MIPS: rb532: Fix MMIO UART resource registration
MIPS: Work around LLVM bug when gp is used as global register variable
MIPS: Loongson64: env: Fixup serial clock-frequency when using LEFI
MIPS: Loongson2ef: Use pcibios_align_resource() to block io range
MIPS: Loongson2ef: Register PCI controller in early stage
clk: microchip: fix typo in reference to a config option
MIPS: Loongson64: dts: fix phy-related definition of LS7A GMAC
clk: microchip: core: allow driver to be compiled with COMPILE_TEST
MIPS: drop unused pic32.h header
watchdog: pic32-wdt: update include to use pic32.h from platform_data
watchdog: pic32-dmt: update include to use pic32.h from platform_data
serial: pic32_uart: update include to use pic32.h from platform_data
rtc: pic32: update include to use pic32.h from platform_data
pinctrl: pic32: update include to use pic32.h from platform_data
mmc: sdhci-pic32: update include to use pic32.h from platform_data
irqchip/irq-pic32-evic: update include to use pic32.h from platform_data
clk: microchip: core: update include to use pic32.h from platform_data
...
moved the context saving APIs around to fix a build error in certain
configurations. There was a change to the core framework for
CLK_OPS_PARENT_ENABLE behavior during registration, but it wrecked existing
drivers that didn't expect things to be turned off during clk registration so
it got reverted.
This cycle is really a large collection of new clk drivers, primarily for
Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed. Another big
change in here is support for automatic hardware clock gating on Samsung SoCs
where the clks turn on and off when needed. Ideally more vendors move to this
method for better power savings. The highlights are in the updates section
below.
Beyond all the new drivers we have a bunch of cleanups like converting drivers
from divider_round_rate() to divider_determine_rate() and using scoped for each
OF child loops. Otherwise it's the usual data fixes and plugging reference
leaks, etc. that's all pretty ordinary but not critical enough to fix until the
next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and video clk
controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on Renesas
RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and resets
on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520
-----BEGIN PGP SIGNATURE-----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=Zx/F
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not much changed in the clk framework this time except the clk.h
consumer API moved the context saving APIs around to fix a build error
in certain configurations.
There was a change to the core framework for CLK_OPS_PARENT_ENABLE
behavior during registration, but it wrecked existing drivers that
didn't expect things to be turned off during clk registration so it
got reverted.
This cycle is really a large collection of new clk drivers, primarily
for Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed.
Another big change in here is support for automatic hardware clock
gating on Samsung SoCs where the clks turn on and off when needed.
Ideally more vendors move to this method for better power savings. The
highlights are in the updates section below.
Beyond all the new drivers we have a bunch of cleanups like converting
drivers from divider_round_rate() to divider_determine_rate() and
using scoped for each OF child loops. Otherwise it's the usual data
fixes and plugging reference leaks, etc. that's all pretty ordinary
but not critical enough to fix until the next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and
video clk controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and
RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and
resets on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (165 commits)
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: Disable KUNIT_UML_PCI
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
...
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a single
real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use devres
consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio driver
along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x and
add more models to the list of supported variants
-----BEGIN PGP SIGNATURE-----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=Zhuy
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"
* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...
There's a bunch of new drivers here, plus a lot of hardening for the
supply resolution code which allow us to support systems where we have
two PMICs each of which has regulators supplied by the other. This did
work a long time ago but got broken as part of improved integration with
the device model, it's fairly rare so nobody noticed.
- Improvements for supply handling from André Draszik to allow systems
with two PMICs with supply/consumer relationships in both
directions to instantiate.
- New drivers for Maxim MAX776750, Realtek RT8902, Samsung S2MPG11,
Texas Instuments TPS65185.
This have also pulls in some MFD updates which are build dependencies
for the Samsung S2MPG11 support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmmJ8RMACgkQJNaLcl1U
h9D42Af/Xw+osom1EXqU1IDuxuKQXKE9GXvHJ+OV2uWaPJE8qy5q1ZNJ38HyMBRW
cuFxfPlUJA/xR47WSvK7LVkHutZVMBIohkhahueP218fDVoQmlxSChcbM8VBzoHW
NJ3TY+rzhHN5O7r00rPfUuxdQwjkGha122xGsxmzzfXUYpKOZ1jxSInR8BibIAc/
0fmz61OAgpgBXMX+dTZvD8usVW4vzCvaYWX0CfdaViDuz72kZn8I1iFWzxQEDS7W
/KGq7WLkyG5x2wzZ6kySKjeq4nWKR1lURMU0KJ6bjW9U/RN3PCpZREJjWNLlUUGJ
ApltpBz5fXJ+tt6/IonwVL6YwjRXpw==
=vcqU
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's a bunch of new drivers here, plus a lot of hardening for the
supply resolution code which allow us to support systems where we have
two PMICs each of which has regulators supplied by the other. This did
work a long time ago but got broken as part of improved integration
with the device model, it's fairly rare so nobody noticed.
- Improvements for supply handling from André Draszik to allow
systems with two PMICs with supply/consumer relationships in both
directions to instantiate.
- New drivers for Maxim MAX776750, Realtek RT8902, Samsung S2MPG11,
Texas Instuments TPS65185.
This have also pulls in some MFD updates which are build dependencies
for the Samsung S2MPG11 support"
* tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (42 commits)
regulator: s2mps11: more descriptive gpio consumer name
regulator: s2mps11: add S2MPG11 regulator
regulator: s2mps11: refactor S2MPG10 regulator macros for S2MPG11 reuse
regulator: s2mps11: refactor S2MPG10 ::set_voltage_time() for S2MPG11 reuse
regulator: s2mps11: add S2MPG10 regulator
regulator: s2mps11: refactor handling of external rail control
regulator: s2mps11: update node parsing (allow -supply properties)
regulator: s2mps11: place constants on right side of comparison tests
regulator: s2mps11: use dev_err_probe() where appropriate
regulator: s2mps11: drop two needless variable initialisations
regulator: add REGULATOR_LINEAR_VRANGE macro
regulator: dt-bindings: add s2mpg11-pmic regulators
regulator: dt-bindings: add s2mpg10-pmic regulators
dt-bindings: firmware: google,gs101-acpm-ipc: convert regulators to lowercase
mfd: sec: Add support for S2MPG11 PMIC via ACPM
mfd: sec: s2mpg10: Reorder regulators for better probe performance
dt-bindings: mfd: Add samsung,s2mpg11-pmic
dt-bindings: mfd: samsung,s2mpg10-pmic: Link to its regulators
dt-bindings: mfd: samsung,s2mps11: Split s2mpg10-pmic into separate file
mfd: sec: Drop now unused struct sec_pmic_dev::irq_data
...
There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP, Qualcomm
and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among
a number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of
the new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the
syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs.
-----BEGIN PGP SIGNATURE-----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=rUYH
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Fixes: c89ac9182e ("rtc: support for the Amlogic on-chip RTC")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20260128095540.863589-13-bigeasy@linutronix.de
This RTC has one "free" register which can be used to store arbitrary
data. Expose it as a nvmem resource in Linux.
Signed-off-by: Lorenz Brun <lorenz@monogon.tech>
Link: https://patch.msgid.link/20251223125728.346073-1-lorenz@monogon.tech
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The Loongson-2K0300's rtc hardware design is similar to that of the
Loongson-1B, but it does not support the alarm feature.
Introduce `LOONGSON_RTC_ALARM_WORKAROUND`, which indicates a chip that
does not support the alarm feature, and rewrite the related logic in
`loongson_rtc_alarm_setting()`.
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/abff68dda2fe6a6601a9e58b31e278d941297fce.1768616276.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Maximum and minimum offsets in ppb that can be handled are dependent on
the rtc clock frequency and what can fit in the 16-bit register field.
Reviewed-by: Harini T <harini.t@amd.com>
Tested-by: Harini T <harini.t@amd.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260122-zynqmp-rtc-updates-v4-5-d4edb966b499@vaisala.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
set_offset was using remainder of do_div as tick_mult which resulted in
wrong offset. Calibration value also assumed builtin calibration default.
Update fract_offset to correctly calculate the value for
negative offset and replace the for loop with division.
Tested-by: Harini T <harini.t@amd.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Reviewed-by: Harini T <harini.t@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260122-zynqmp-rtc-updates-v4-4-d4edb966b499@vaisala.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
read_offset() was using static frequency for determining
the tick offset. It was also using remainder from do_div()
operation as tick_mult value which caused the offset to be
incorrect.
At the same time, rework function to improve readability.
It is worth noting, that due to rounding errors, the offset
readback will differ slightly for positive and negative
calibration values.
Reviewed-by: Harini T <harini.t@amd.com>
Tested-by: Harini T <harini.t@amd.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260122-zynqmp-rtc-updates-v4-3-d4edb966b499@vaisala.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Enable check to not overflow the calibration
max value.
Reviewed-by: Harini T <harini.t@amd.com>
Tested-by: Harini T <harini.t@amd.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260122-zynqmp-rtc-updates-v4-2-d4edb966b499@vaisala.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix calibration value in case a clock reference is provided.
The actual calibration value written into register is
frequency - 1.
Reviewed-by: Harini T <harini.t@amd.com>
Tested-by: Harini T <harini.t@amd.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260122-zynqmp-rtc-updates-v4-1-d4edb966b499@vaisala.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Fixes: c89ac9182e ("rtc: support for the Amlogic on-chip RTC")
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260128095540.863589-13-bigeasy@linutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The core driver now exposes the alarm IRQ as a resource, so we can drop
the lookup from here to simplify the code and make adding support for
additional variants easier in this driver.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/20260113-s5m-alarm-v3-2-855a19db1277@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
When switching to regmap, the i2c_client pointer was removed from struct
pcf8563 so this function switched to using the RTC device instead. But
the RTC device is a child of the original I2C device and does not have
an associated of_node.
Reference the correct device's of_node to ensure that the output clock
can be found when referenced by other devices and so that the override
clock name is read correctly.
Cc: stable@vger.kernel.org
Fixes: 00f1bb9b84 ("rtc: pcf8563: Switch to regmap")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://patch.msgid.link/20260108184749.3413348-1-jkeeping@inmusicbrands.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
IS_REACHABLE() is meant to be used with full symbol names from a kernel
.config file, not the shortened symbols used in Kconfig files, so
change HWMON to CONFIG_HWMON in 3 places.
Fixes: dedaf03b99 ("rtc: max31335: add driver support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260108045432.2705691-1-rdunlap@infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The NV VRS RTC driver currently is only supported on the
Tegra platform so add a dep for ARCH_TEGRA and compile test
so it doesn't show up universally across all arches/platforms.
Fixes: 9d6d6b0693 ("rtc: nvvrs: add NVIDIA VRS RTC device driver")
Cc: Shubhi Garg <shgarg@nvidia.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251222035651.433603-1-pbrobinson@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The tee bus got dedicated callbacks for probe and remove. Make use of
these. This fixes a runtime warning about the driver needing to be
converted to the bus methods.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The tee subsystem recently got a set of dedicated functions to register
(and unregister) a tee driver. Make use of them. These care for setting the
driver's bus (so the explicit assignment can be dropped) and the driver
owner (which is an improvement this driver benefits from).
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Subsystem:
- stop setting max_user_freq from the individual drivers as this has not been
hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support
-----BEGIN PGP SIGNATURE-----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=oBij
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support"
* tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: spacemit: MFD_SPACEMIT_P1 as dependencies
rtc: atcrtc100: Fix signedness bug in probe()
rtc: max31335: Fix ignored return value in set_alarm
rtc: gamecube: Check the return value of ioremap()
Documentation: ABI: testing: Fix "upto" typo in rtc-cdev
rtc: Add new rtc-macsmc driver for Apple Silicon Macs
dt-bindings: rtc: Add Apple SMC RTC
MAINTAINERS: drop unneeded file entry in NVIDIA VRS RTC DRIVER
rtc: isl12026: Add id_table
rtc: renesas-rtca3: Add support for multiple reset lines
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
rtc: tegra: Replace deprecated SIMPLE_DEV_PM_OPS
rtc: tegra: Add ACPI support
rtc: tegra: Use devm_clk_get_enabled() in probe
rtc: Kconfig: add MC34708 to mc13xxx help text
rtc: s35390a: use u8 instead of char for register buffer
rtc: nvvrs: add NVIDIA VRS RTC device driver
dt-bindings: rtc: Document NVIDIA VRS RTC
rtc: atcrtc100: Add ATCRTC100 RTC driver
MAINTAINERS: Add entry for ATCRTC100 RTC driver
...
RTC_DRV_SPACEMIT_P1 is a subdevice of P1 and should depend on
MFD_SPACEMIT_P1 rather than selecting it directly. Using 'select'
does not always respect the parent's dependencies, so 'depends on'
is the safer and more correct choice.
Additionally, the default value depends on MFD_SPACEMIT_P1 rather
than ARCH_SPACEMIT.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Acked-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251118-p1-kconfig-fix-v3-2-8839c5ac5db3@linux.spacemit.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The "atcrtc_dev->alarm_irq" variable is an unsigned int but it needs to
be signed for the error handling to work. Use the "ret" variable
instead.
Fixes: 7adca706fe ("rtc: atcrtc100: Add ATCRTC100 RTC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aRxPGBEX8hbY6sjV@stanley.mountain
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The function ioremap() in gamecube_rtc_read_offset_from_sram() can fail
and return NULL, which is dereferenced without checking, leading to a
NULL pointer dereference.
Add a check for the return value of ioremap() and return -ENOMEM on
failure.
Fixes: 86559400b3 ("rtc: gamecube: Add a RTC driver for the GameCube, Wii and Wii U")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Link Mauve <kernel@linkmauve.fr>
Link: https://patch.msgid.link/20251126080625.1752-1-vulab@iscas.ac.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Apple Silicon Macs (M1, etc.) have an RTC that is part of the PMU IC,
but most of the PMU functionality is abstracted out by the SMC.
On T600x machines, the RTC counter must be accessed via the SMC to
get full functionality, and it seems likely that future machines
will move towards making SMC handle all RTC functionality.
The SMC RTC counter access is implemented on all current machines
as of the time of this writing, on firmware 12.x. However, the RTC
offset (needed to set the time) is still only accessible via direct
PMU access. To handle this, we expose the RTC offset as an NVMEM
cell from the SPMI PMU device node, and this driver consumes that
cell and uses it to compute/set the current time.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20251112-macsmc-subdevs-v5-3-728e4b91fe81@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Switch from devm_reset_control_get_shared() to
devm_reset_control_array_get_shared() when retrieving resets.
The RZ/V2H SoC requires two resets for the RTC block instead of one,
so this will allow to handle multiple resets without additional changes.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251107210706.45044-3-ovidiu.panait.rb@renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace deprecated SIMPLE_DEV_PM_OPS with DEFINE_SIMPLE_DEV_PM_OPS macro
and use pm_sleep_ptr() to initialize pm_ops. This also allows us to drop
the checks for CONFIG_PM_SLEEP.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251024064952.775883-3-kkartik@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add ACPI support for Tegra RTC, which is available on Tegra241 and
Tegra410. Both Tegra241 and Tegra410 use the same ACPI ID 'NVDA0280'.
When ACPI boot is used, the RTC clock is configured by UEFI before
the kernel boots. On device-tree boot, the probe must fail if clocks are
not provided in the device-tree.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251024064952.775883-2-kkartik@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Simplify clock management by replacing devm_clk_get() and manual clock
enable/disable with devm_clk_get_enabled(). This also simplifies the
error handling logic. Also remove tegra_rtc_remove() as the clock will
automatically be disabled when the device is unbound from the bus.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251024064952.775883-1-kkartik@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
MC34708 is one of the three mfd devices supported by DRV_MC13XXX.
Update Kconfig accordingly.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Link: https://patch.msgid.link/20251011062605.13591-1-akurz@blala.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The register buffer in s35390a_get_reg() was previously defined as
`char *buf`. This is not ideal since register data represents raw
binary values rather than textual data.
Switch the type to `u8 *buf` to better reflect its intended usage and
to avoid potential issues with sign extension when handling register
values on platforms where `char` is signed by default.
This change improves type safety and makes the code consistent with
other RTC drivers that operate on raw register data.
Signed-off-by: Nick Huang <sef1548@gmail.com>
Link: https://patch.msgid.link/20250920174224.108795-1-sef1548@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for NVIDIA VRS (Voltage Regulator Specification) RTC device
driver. NVIDIA VRS is a Power Management IC (PMIC) that implements a
power sequencing solution with I2C interface. The device includes RTC
which provides functionality to get/set system time, retain system
time across boot, wake system from suspend and shutdown state.
Supported platforms:
- NVIDIA Jetson AGX Orin Developer Kit
- NVIDIA IGX Orin Development Kit
- NVIDIA Jetson Orin NX Developer Kit
- NVIDIA Jetson Orin Nano Developer Kit
Signed-off-by: Shubhi Garg <shgarg@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251007135738.487694-4-shgarg@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
max_user_freq has not been related to the hardware RTC since commit
6610e0893b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20251101-max_user_freq-v1-11-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
max_user_freq has not been related to the hardware RTC since commit
6610e0893b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Link: https://patch.msgid.link/20251101-max_user_freq-v1-10-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
max_user_freq has not been related to the hardware RTC since commit
6610e0893b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Link: https://patch.msgid.link/20251101-max_user_freq-v1-9-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
max_user_freq has not been related to the hardware RTC since commit
6610e0893b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Link: https://patch.msgid.link/20251101-max_user_freq-v1-8-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
max_user_freq has not been related to the hardware RTC since commit
6610e0893b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Link: https://patch.msgid.link/20251101-max_user_freq-v1-7-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
max_user_freq has not been related to the hardware RTC since commit
6610e0893b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Link: https://patch.msgid.link/20251101-max_user_freq-v1-6-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
max_user_freq has not been related to the hardware RTC since commit
6610e0893b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Link: https://patch.msgid.link/20251101-max_user_freq-v1-5-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
max_user_freq has not been related to the hardware RTC since commit
6610e0893b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251101-max_user_freq-v1-4-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
max_user_freq has not been related to the hardware RTC since commit
6610e0893b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Link: https://patch.msgid.link/20251101-max_user_freq-v1-3-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
max_user_freq has not been related to the hardware RTC since commit
6610e0893b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Acked-by: Joshua Kinard <linux@kumba.dev>
Link: https://patch.msgid.link/20251101-max_user_freq-v1-2-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
max_user_freq has not been related to the hardware RTC since commit
6610e0893b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Link: https://patch.msgid.link/20251101-max_user_freq-v1-1-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use devm_device_init_wakeup to simplify probe and remove .remove as it is now
empty.
Also remove the unnecessary error string as there are no error path without an
error message in devm_rtc_register_device.
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20251031204724.756857-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The clock obtained via devm_clk_get_enabled() is automatically managed
by devres and will be disabled and freed on driver detach. Manually
calling clk_disable_unprepare() in error path and remove function
causes double free.
Remove the redundant clk_disable_unprepare() calls from the probe
error path and aml_rtc_remove(), allowing the devm framework to
automatically manage the clock lifecycle.
Fixes: c89ac9182e ("rtc: support for the Amlogic on-chip RTC")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20251021103559.1903-1-vulab@iscas.ac.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Commit e0762fd26a ("rtc: cpcap: Fix initial enable_irq/disable_irq
balance") set 'alarm_enabled' prior to calling the function
devm_request_threaded_irq() because this enables the IRQ. However, right
after calling devm_request_threaded_irq(), the driver calls
disable_irq() to disable the IRQ and so now 'alarm_enabled' will be true
but the IRQ is actually disabled. Revert this commit to fix the
'alarm_enabled' state.
Fixes: e0762fd26a ("rtc: cpcap: Fix initial enable_irq/disable_irq balance")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251031103741.945460-2-jonathanh@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Commit 1502fe0e97 ("rtc: tps6586x: Fix initial enable_irq/disable_irq
balance") breaks the wake-up alarm for the tps6586x. After this commit
was added RTC wake ups from suspend stopped working on the Tegra20
Ventana platform.
The problem is that this change set the 'irq_en' variable to true prior
to calling devm_request_threaded_irq() to indicate that the IRQ is
enabled, however, it was over looked that the flag IRQ_NOAUTOEN is
already set meaning that the IRQ is not enabled by default. This
prevents the IRQ from being enabled as expected. Revert this change to
fix this.
Fixes: 1502fe0e97 ("rtc: tps6586x: Fix initial enable_irq/disable_irq balance")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251031103741.945460-1-jonathanh@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When setting a normal alarm, user-space is responsible for using
RTC_AIE_ON/RTC_AIE_OFF to control if alarm irq should be enabled.
But when RTC_UIE_ON is used, interrupts must be enabled so that the
requested irq events are generated.
When RTC_UIE_OFF is used, alarm irq is disabled if there are no other
alarms queued, so this commit brings symmetry to that.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-5-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Interrupts are automatically enabled when requested, so we need to
initialize irq_en accordingly to avoid causing an unbalanced enable
warning.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-4-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Interrupts are automatically enabled when requested, so we need to
initialize alarm_enabled accordingly to avoid causing an unbalanced enable
warning.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-3-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Interrupts are automatically enabled when requested, so we need to
initialize irq_enabled accordingly to avoid causing an unbalanced enable
warning.
Fixes: c62d658e52 ("rtc: isl12022: Add alarm support")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-2-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
As described in the old comment dating back to
commit 6610e0893b ("RTC: Rework RTC code to use timerqueue for events")
from 2010, we have been living with a race window when setting alarm
with an expiry in the near future (i.e. next second).
With 1 second resolution, it can happen that the second ticks after the
check for the timer having expired, but before the alarm is actually set.
When this happen, no alarm IRQ is generated, at least not with some RTC
chips (isl12022 is an example of this).
With UIE RTC timer being implemented on top of alarm irq, being re-armed
every second, UIE will occasionally fail to work, as an alarm irq lost
due to this race will stop the re-arming loop.
For now, I have limited the additional expiry check to only be done for
alarms set to next seconds. I expect it should be good enough, although I
don't know if we can now for sure that systems with loads could end up
causing the same problems for alarms set 2 seconds or even longer in the
future.
I haven't been able to reproduce the problem with this check in place.
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-1-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When using interrupt pin (INT A) as watchdog output all other
interrupt sources need to be disabled to avoid additional
resets. Resulting INT_A_MASK1 value is 55 (0x37).
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20250902182235.6825-1-bruno.thomsen@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
During kexec reboots, RTC alarms that are fired during the kernel
transition experience delayed execution. The new kernel would eventually
honor these alarms, but the interrupt handlers would only execute after
the driver probe is completed rather than at the intended alarm time.
This is because pending alarm interrupt status from the previous kernel
is not properly cleared during driver initialization, causing timing
discrepancies in alarm delivery.
To ensure precise alarm timing across kexec transitions, enhance the
probe function to:
1. Clear any pending alarm interrupt status from previous boot.
2. Detect existing valid alarms and preserve their state.
3. Re-enable alarm interrupts for future alarms.
Signed-off-by: Harini T <harini.t@amd.com>
Link: https://lore.kernel.org/r/20250730142110.2354507-1-harini.t@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
It is common to include the I2C address of the device in the source
file.
Signed-off-by: Tóth János <gomba007@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for the RTC found in the SpacemiT P1 PMIC. Initially
only setting and reading the time are supported.
The PMIC is implemented as a multi-function device. This RTC is
probed based on this driver being named in a MFD cell in the simple
MFD I2C driver.
Signed-off-by: Alex Elder <elder@riscstar.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250825172057.163883-5-elder@riscstar.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add read_alarm and set_alarm ops from the rtc framework.
The support of an alarm is handled by a kernel thread waiting in OP-TEE
for an asynchronous notification that comes in the interrupt
handler of the alarm interruption on OP-TEE secure world.
Once the notification arrives, the kernel thread previously suspended
is rescheduled (this is handled by the OP-TEE kernel driver) and comes
back with the alarm information to the kernel.
A second session is therefore needed to enable/disable/cancel a waiting
alarm event as the kernel thread stopped in OP-TEE takes a form of mutex
on the session and so no one can use this session in parallel.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250715-upstream-optee-rtc-v1-3-e0fdf8aae545@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix a memory leak in case of driver removal.
Free the shared memory used for arguments exchanges between kernel and
OP-TEE RTC PTA.
Fixes: 81c2f059ab ("rtc: optee: add RTC driver for OP-TEE RTC PTA")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250715-upstream-optee-rtc-v1-1-e0fdf8aae545@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The vendor for the X1205 RTC is not Xircom, but Xicor which was acquired
by Intersil. Since the I2C subsystem drops the vendor prefix for driver
matching, the vendor prefix hasn't mattered.
Fixes: 6875404fdb ("rtc: x1205: Add DT probing support")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250821215703.869628-2-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When using MMIO with regmap, fast_io is implied. No need to set it
again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250813161517.4746-18-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The EFI rtc driver is used by non-x86 architectures only, and exposes
the get/set wakeup time functionality provided by the underlying
platform. This is usually broken on most platforms, and not widely used
to begin with [if at all], so let's just remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Feng Tang <feng.tang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250714060843.4029171-6-ardb+git@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
PCF2127 can generate interrupt every full second or minute configured
from control and status register 1, bits MI (1) and SI (0).
On interrupt control register 2 bit MSF (7) is set and must be cleared
to continue normal operation.
While the driver never enables this interrupt on its own, users or
firmware may do so - e.g. as an easy way to test the interrupt.
Add preprocessor definition for MSF bit and include it in the irq
bitmask to ensure minute and second interrupts are cleared when fired.
This fixes an issue where the rtc enters a test mode and becomes
unresponsive after a second interrupt has fired and is not cleared in
time. In this state register writes to control registers have no
effect and the interrupt line is kept asserted [1]:
[1] userspace commands to put rtc into unresponsive state:
$ i2cget -f -y 2 0x51 0x00
0x04
$ i2cset -f -y 2 0x51 0x00 0x05 # set bit 0 SI
$ i2cget -f -y 2 0x51 0x00
0x84 # bit 8 EXT_TEST set
$ i2cset -f -y 2 0x51 0x00 0x05 # try overwrite control register
$ i2cget -f -y 2 0x51 0x00
0x84 # no change
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20250825-rtc-irq-v1-1-0133319406a7@solid-run.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Samsung S3C24xx family of SoCs was removed the Linux kernel in the
commit 61b7f8920b ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of remaining S3C24xx compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250830130024.142815-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This driver supports RTC functionality for NCT6694 MFD device
based on USB interface.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-8-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
mc13xxx_irq_ack() got deprecated and became dead code with commit
10f9edaeaa ("mfd: mc13xxx: Use regmap irq framework for interrupts").
It should be safe to remove it now.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://lore.kernel.org/r/20250811064358.1659-1-akurz@blala.de
Signed-off-by: Lee Jones <lee@kernel.org>
Subsystem:
- Convert drivers exposing a clock from round_rate() to determine_rate()
Drivers:
- ds1307: oscillator stop flag handling for ds1341
- pcf85063: add support for RV8063
-----BEGIN PGP SIGNATURE-----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=+Y1R
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Support for a new RTC in an existing driver and all the drivers
exposing clocks using the common clock framework have been converted
to determine_rate(). Summary:
Subsystem:
- Convert drivers exposing a clock from round_rate() to determine_rate()
Drivers:
- ds1307: oscillator stop flag handling for ds1341
- pcf85063: add support for RV8063"
* tag 'rtc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: ds1685: Update Joshua Kinard's email address.
rtc: rv3032: convert from round_rate() to determine_rate()
rtc: rv3028: convert from round_rate() to determine_rate()
rtc: pcf8563: convert from round_rate() to determine_rate()
rtc: pcf85063: convert from round_rate() to determine_rate()
rtc: nct3018y: convert from round_rate() to determine_rate()
rtc: max31335: convert from round_rate() to determine_rate()
rtc: m41t80: convert from round_rate() to determine_rate()
rtc: hym8563: convert from round_rate() to determine_rate()
rtc: ds1307: convert from round_rate() to determine_rate()
rtc: rv3028: fix incorrect maximum clock rate handling
rtc: pcf8563: fix incorrect maximum clock rate handling
rtc: pcf85063: fix incorrect maximum clock rate handling
rtc: nct3018y: fix incorrect maximum clock rate handling
rtc: hym8563: fix incorrect maximum clock rate handling
rtc: ds1307: fix incorrect maximum clock rate handling
rtc: pcf85063: scope pcf85063_config structures
rtc: Optimize calculations in rtc_time64_to_tm()
dt-bindings: rtc: amlogic,a4-rtc: Add compatible string for C3
rtc: ds1307: handle oscillator stop flag (OSF) for ds1341
...
I am switching my address to a personal domain, so need to update the
driver's files and the entry in MAINTAINERS.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Link: https://lore.kernel.org/r/20250721170051.32407-1-kumba@gentoo.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-15-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-14-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-13-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-12-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-11-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-10-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-9-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-8-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-7-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When rv3028_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: f583c341a5 ("rtc: rv3028: add clkout support")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-6-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When pcf8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: a39a6405d5 ("rtc: pcf8563: add CLKOUT to common clock framework")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-5-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When pcf85063_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 8c229ab604 ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-4-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When nct3018y_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 5adbaed16c ("rtc: Add NCT3018Y real time clock driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-3-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When hym8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: dcaf038493 ("rtc: add hym8563 rtc-driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-2-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When ds3231_clk_sqw_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 6c6ff145b3 ("rtc: ds1307: add clock provider support for DS3231")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-1-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Core changes:
- Open code PINCTRL_FUNCTION_DESC() instead of defining
a complex macro only used in one place.
- Add pinmux_generic_add_pinfunction() helper and
use this in a few drivers.
New drivers:
- Amlogic S7, S7D and S6 pin control support.
- Eswin EIC7700 pin control support.
- Qualcomm PMIV0104, PM7550 and Milos pin control
support.
Because of unhelpful numbering schemes, the Qualcomm
driver now needs to start to rely on SoC codenames.
- STM32 HDP pin control support.
- Mediatek MT8189 pin control support.
Improvements:
- Switch remaining pin control drivers over to the
new GPIO set callback that provides a return value.
- Support RSVD (reserved) pins in the STM32 driver.
- Move many fixed assignments over to pinctrl_desc
definitions.
- Handle multiple TLMM regions in the Qualcomm driver.
-----BEGIN PGP SIGNATURE-----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=hEj7
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Nothing stands out, apart from maybe the interesting Eswin EIC7700, a
RISC-V SoC I've never seen before.
Core changes:
- Open code PINCTRL_FUNCTION_DESC() instead of defining a complex
macro only used in one place
- Add pinmux_generic_add_pinfunction() helper and use this in a few
drivers
New drivers:
- Amlogic S7, S7D and S6 pin control support
- Eswin EIC7700 pin control support
- Qualcomm PMIV0104, PM7550 and Milos pin control support
Because of unhelpful numbering schemes, the Qualcomm driver now
needs to start to rely on SoC codenames
- STM32 HDP pin control support
- Mediatek MT8189 pin control support
Improvements:
- Switch remaining pin control drivers over to the new GPIO set
callback that provides a return value
- Support RSVD (reserved) pins in the STM32 driver
- Move many fixed assignments over to pinctrl_desc definitions
- Handle multiple TLMM regions in the Qualcomm driver"
* tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: mediatek: Add pinctrl driver for mt8189
dt-bindings: pinctrl: mediatek: Add support for mt8189
pinctrl: aspeed-g6: Add PCIe RC PERST pin group
pinctrl: ingenic: use pinmux_generic_add_pinfunction()
pinctrl: keembay: use pinmux_generic_add_pinfunction()
pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction()
pinctrl: airoha: use pinmux_generic_add_pinfunction()
pinctrl: equilibrium: use pinmux_generic_add_pinfunction()
pinctrl: provide pinmux_generic_add_pinfunction()
pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC()
pinctrl: ma35: use new GPIO line value setter callbacks
MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer
pinctrl: stm32: Introduce HDP driver
dt-bindings: pinctrl: stm32: Introduce HDP
pinctrl: qcom: Add Milos pinctrl driver
dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer
pinctrl: qcom: spmi: Add PM7550
dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support
pinctrl: qcom: spmi: Add PMIV0104
dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support
...
Recently (in commit 7df4cfef8b ("rtc: Make rtc_time64_to_tm() support
dates before 1970")) the function rtc_time64_to_tm() was repaired for
times before 1970. This introduced two if blocks. Cassio Neri pointed
out that to be not neccessary and suggested an adaption that allows to
drop the two branch points again.
This is implemented here.
Also adapt the reference to the theoretical paper to link to the final
published article instead of the preprint on Cassio's request.
Suggested-by: Cassio Neri <cassio.neri@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250613142405.253420-2-u.kleine-koenig@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In using CONFIG_RTC_HCTOSYS, rtc_hctosys() will sync the RTC time to the
kernel time as long as rtc_read_time() succeeds. In some power loss
situations, our supercapacitor-backed DS1342 RTC comes up with either an
unpredictable future time or the default 01/01/00 from the datasheet.
The oscillator stop flag (OSF) is set in these scenarios due to the
power loss and can be used to determine the validity of the RTC data.
This change expands the oscillator stop flag (OSF) handling that has
already been implemented for some chips to the ds1341 chip (DS1341 and
DS1342 share a datasheet). This handling manages the validity of the RTC
data in .read_time and .set_time based on the OSF.
Signed-off-by: Meagan Lloyd <meaganlloyd@linux.microsoft.com>
Reviewed-by: Tyler Hicks <code@tyhicks.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/1749665656-30108-3-git-send-email-meaganlloyd@linux.microsoft.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In using CONFIG_RTC_HCTOSYS, rtc_hctosys() will sync the RTC time to the
kernel time as long as rtc_read_time() succeeds. In some power loss
situations, our supercapacitor-backed DS1342 RTC comes up with either an
unpredictable future time or the default 01/01/00 from the datasheet.
The oscillator stop flag (OSF) is set in these scenarios due to the
power loss and can be used to determine the validity of the RTC data.
Some chip types in the ds1307 driver already have OSF handling to
determine whether .read_time provides valid RTC data or returns -EINVAL.
This change removes the clear of the OSF in .probe as the OSF needs to
be preserved to expand the OSF handling to the ds1341 chip type (note
that DS1341 and DS1342 share a datasheet).
Signed-off-by: Meagan Lloyd <meaganlloyd@linux.microsoft.com>
Reviewed-by: Tyler Hicks <code@tyhicks.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/1749665656-30108-2-git-send-email-meaganlloyd@linux.microsoft.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Microcrystal RV8063 is a real-time clock with SPI interface. Its
functionality is very similar to the RV8263 rtc.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Link: https://lore.kernel.org/r/20250413130755.159373-4-apokusinski01@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move the i2c-specific code from pcf85063_probe to the newly created
function.
This is a preparation for introducing the support for RV8063 real-time
clock with SPI interface.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Link: https://lore.kernel.org/r/20250413130755.159373-3-apokusinski01@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Convention is to define static data as 'static const ...', not 'static
... const' because of readability, even if the code is functionally
equal.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250707092200.48862-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The M41T65 device does not support the "Halt Update Bit" (HT) feature
as per its datasheet.
This aligns the driver with the actual hardware capabilities.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Link: https://lore.kernel.org/r/20250704091144.45389-1-eagle.alexander923@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When there is no new groups provided, no need to reallocate memory,
copy the old ones and free them in order to do nothing. Do nothing
instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250702073224.2684097-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Follow the advice of the Documentation/filesystems/sysfs.rst that show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250702061534.2670729-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Convert the Renesas SuperH On-Chip RTC driver from SIMPLE_DEV_PM_OPS()
to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(). This lets us drop the
__maybe_unused annotations from its suspend and resume callbacks, and
reduces kernel size in case CONFIG_PM or CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/396d4a769b8d3c6fec43c65022cdfd8a6854524a.1752086758.git.geert+renesas@glider.be
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace comma with semicolon at the end of the statement when setting
config.max_register.
Fixes: fd28ceb460 ("rtc: pcf2127: add variant-specific configuration structure")
Cc: stable@vger.kernel.org
Cc: Elena Popa <elena.popa@nxp.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250529202923.1552560-1-hugo@hugovil.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
PCF2131 was not responding to read/write operations using SPI. PCF2131
has a different command byte definition, compared to PCF2127/29. Added
the new command byte definition when PCF2131 is detected.
Fixes: afc505bf90 ("rtc: pcf2127: add support for PCF2131 RTC")
Cc: stable@vger.kernel.org
Signed-off-by: Elena Popa <elena.popa@nxp.com>
Acked-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250530104001.957977-1-elena.popa@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
cmos_interrupt() can be called in a non-interrupt context, such as in
an ACPI event handler (which runs in an interrupt thread). Therefore,
usage of spin_lock(&rtc_lock) is insecure. Use spin_lock_irqsave() /
spin_unlock_irqrestore() instead.
Before a misguided
commit 6950d046eb ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ")
the cmos_interrupt() function used spin_lock_irqsave(). That commit
changed it to spin_lock() and broke locking, which was partially fixed in
commit 13be2efc39 ("rtc: cmos: Disable irq around direct invocation of cmos_interrupt()")
That second commit did not take account of the ACPI fixed event handler
pathway, however. It introduced local_irq_disable() workarounds in
cmos_check_wkalrm(), which can cause problems on PREEMPT_RT kernels
and are now unnecessary.
Add an explicit comment so that this change will not be reverted by
mistake.
Cc: stable@vger.kernel.org
Fixes: 6950d046eb ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://lore.kernel.org/all/aDtJ92foPUYmGheF@debian.local/
Link: https://lore.kernel.org/r/20250607210608.14835-1-mat.jonczyk@o2.pl
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Instead of the open-coded read/modify/write sequence, we can simply use
the regmap helpers regmap_set_bits() and regmap_update_bits()
respectively.
This makes the code easier to read, and avoids extra work in case the
underlying bus supports updating bits via
struct regmap_bus::reg_update_bits() directly (which is the case for
S2MPG10 on gs101 where this driver communicates via ACPM).
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-31-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The regmap_clear_bits() and regmap_set_bits() helper macros state the
intention a bit more obviously.
Use those.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-30-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
To release memory allocated by device_init_wakeup(true), drivers have
to call device_init_wakeup(false) in error paths and unbind.
Switch to the new devres managed version devm_device_init_wakeup() to
plug this memleak.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-29-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix this minor typo, and adjust the a related incorrect alignment to
avoid a checkpatch error.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-28-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for Samsung's S2MPG10 PMIC RTC, which is similar to the
existing PMIC RTCs supported by this driver.
S2MPG10 doesn't use I2C, so we expect the core driver to have created a
regmap for us.
Additionally, it can be used for doing a cold-reset. If requested to do
so (via DT), S2MPG10 is programmed with a watchdog configuration that
will perform a full power cycle upon watchdog expiry.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-27-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The Samsung S2MPG10 PMIC is not connected via I2C as this driver
assumes, hence this driver's current approach of creating an I2C-based
regmap doesn't work for it, and this driver should use the regmap
provided by the parent (core) driver instead for that PMIC.
To prepare this driver for s2mpg support, restructure the code to only
create a regmap if one isn't provided by the parent.
No functional changes, since the parent doesn't provide a regmap for
any of the PMICs currently supported by this driver. Having this change
separate will simply make the addition of S2MPG10 support more
self-contained, without additional restructuring.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-26-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
platform_get_device_id() is called mulitple times during probe to
retrieve the device type. This makes the code harder to read than
necessary.
Just get the type once, which also trims the lengths of the lines
involved.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-25-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The local static 'struct pinctrl_desc' is not modified, so can be made
const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/20250611-pinctrl-const-desc-v2-17-b11c1d650384@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
The MT6357 PMIC contains the same RTC as MT6358 which allows to add
support for it trivially by just complementing the list of compatibles.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250428-rtc-mt6357-v1-1-31f673b0a723@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
While the RTC framework intends to only handle dates after 1970 for
consumers, time conversion must also work for earlier dates to cover
e.g. storing dates beyond an RTC's range_max. This is most relevant for
the rtc-mt6397 driver that has
range_min = RTC_TIMESTAMP_BEGIN_1900;
range_max = mktime64(2027, 12, 31, 23, 59, 59);
and so needs working support for timestamps in 1900 starting in less than
three years.
So shift the tested interval of timestamps to also cover years 1900 to
1970.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20250428-enable-rtc-v4-5-2b2f7e3f9349@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
To cover calculation of the time and wday in the rtc kunit test also check
tm_hour, tm_min, tm_sec and tm_wday of the rtc_time calculated by
rtc_time64_to_tm().
There are no surprises, the two tests making use of
rtc_time64_to_tm_test_date_range() continue to succeed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20250428-enable-rtc-v4-4-2b2f7e3f9349@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This is easier to handle because you can just consult date(1) to convert
between a seconds-since-1970 value and a date string:
$ date --utc -d @3661
Thu Jan 1 01:01:01 AM UTC 1970
$ date -d "Jan 1 12:00:00 AM UTC 1900" +%s
-2208988800
The intended side effect is that this prepares the test for dates before
1970. The division of a negative value by 86400 doesn't result in the
desired days-since-1970 value as e.g. secs=-82739 should map to days=-1.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20250428-enable-rtc-v4-3-2b2f7e3f9349@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The comparison
rtc->start_secs > rtc->range_max
has a signed left-hand side and an unsigned right-hand side.
So the comparison might become true for negative start_secs which is
interpreted as a (possibly very large) positive value.
As a negative value can never be bigger than an unsigned value
the correct representation of the (mathematical) comparison
rtc->start_secs > rtc->range_max
in C is:
rtc->start_secs >= 0 && rtc->start_secs > rtc->range_max
Use that to fix the offset calculation currently used in the
rtc-mt6397 driver.
Fixes: 989515647e ("rtc: Add one offset seconds to expand RTC range")
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250428-enable-rtc-v4-2-2b2f7e3f9349@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Conversion of dates before 1970 is still relevant today because these
dates are reused on some hardwares to store dates bigger than the
maximal date that is representable in the device's native format.
This prominently and very soon affects the hardware covered by the
rtc-mt6397 driver that can only natively store dates in the interval
1900-01-01 up to 2027-12-31. So to store the date 2028-01-01 00:00:00
to such a device, rtc_time64_to_tm() must do the right thing for
time=-2208988800.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250428-enable-rtc-v4-1-2b2f7e3f9349@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When the regmap framework was introduced to this driver,
the PCF8563_REG_AMN register within the set_alarm function was
incorrectly changed to PCF8563_REG_SC.
The PCF8563_REG_SC register is the seconds register.
This caused alarm values to be written to the seconds register
when an alarm was set. Which means the alarm would not trigger
as expected and the seconds register would be overwritten
with an incorrect value.
Signed-off-by: Troy Mitchell <troymitchell988@gmail.com>
Link: https://lore.kernel.org/r/20250531-pcf8563-fix-alarm-v2-1-cac4b1716167@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When using the SCMP mode instead of SUBU, this RTC can also support
other input frequencies than 32768Hz. Also, upcoming SoCs will only
support SCMP.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20250526095801.35781-8-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Datasheet says that the controller must be disabled before setting up
either SUBU or SCMP. This did not matter so far because the driver only
supported SUBU which was the default, too. It is good practice to follow
datasheet recommendations, though. It will also be needed because SCMP
mode will be added in a later patch.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20250526095801.35781-7-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver currently uses dev_err for messages that have a very low probability
of being read by the user as the error will probably never happen and the
systems with the RTC probably don't have any user able to read the message.
Moreover, the only user action after getting this message is the restart the
action so drop the level to dev_dbg.
Link: https://lore.kernel.org/r/20250525222153.1472917-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The ocillator on the m41t62 (and other chips of this type) needs
a kickstart upon a failure; the RTC read routine will notice the
oscillator failure and fail reads. This is added in the RTC write
routine; this allows the system to know that the time in the RTC
is accurate. This is following the procedure described in section
3.11 of "https://www.st.com/resource/en/datasheet/m41t62.pdf"
Signed-off-by: A. Niyas Ahamed Mydeen <nmydeen@mvista.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20250402120546.336657-2-nmydeen@mvista.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add a RTC driver for NXP S32G2/S32G3 SoCs.
RTC tracks clock time during system suspend. It can be a wakeup source
for the S32G2/S32G3 SoC based boards.
The RTC module from S32G2/S32G3 is not battery-powered and it is not kept
alive during system reset.
Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Enric Balletbo i Serra <eballetbo@kernel.org>
Link: https://lore.kernel.org/r/20250403103346.3064895-3-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When an application sets and enables an alarm on Loongson RTC devices,
the alarm notification fails to propagate to userspace because the
ACPI event handler omits calling rtc_update_irq().
As a result, processes waiting via select() or poll() on RTC device
files fail to receive alarm notifications.
The ACPI interrupt is also triggered multiple times. In loongson_rtc_handler,
we need to clear TOY_MATCH0_REG to resolve this issue.
Fixes: 09471d8f5b ("rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr()")
Fixes: 1b733a9ebc ("rtc: Add rtc driver for the Loongson family chips")
Signed-off-by: Liu Dalin <liudalin@kylinsec.com.cn>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20250509084416.7979-1-liudalin@kylinsec.com.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Implement the RTC driver for CV1800, which able to provide time alarm.
Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250507195626.502240-1-alexander.sverdlin@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 4e64350f42 ("rtc: add STM32 RTC driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-8-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only support OF probe so drop the unused platform module
alias.
Fixes: ae05c95074 ("rtc: s3c: add s3c_rtc_data structure to use variant data instead of s3c_cpu_type")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Fixes: 0d297df038 ("ARM: s3c: simplify platform code")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-7-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 5a418558cd ("rtc: pm8xxx: add support for devicetree")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-6-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 24e1f2c938 ("rtc: ingenic: Only support probing from devicetree")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20250423130318.31244-5-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 80ca3277bc ("rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-4-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only supports OF probe so drop the unused platform module
alias.
Fixes: dd3bf50b35 ("rtc: cpcap: new rtc driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250423130318.31244-3-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver only support OF probe so drop the unused platform module
alias.
Fixes: 288d9cf176 ("rtc: at91rm9200: use of_device_get_match_data()")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423130318.31244-2-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which a
driver can take into account.
On platforms where the offset is stored in a Qualcomm specific UEFI
variable the variables are also accessed in a non-standard way, which
means that the OS cannot assume that the variable service is available
by the time the driver probes.
Use the new 'qcom,uefi-rtc-info' property to determine whether to probe
defer until the UEFI offset becomes available so that the offset can be
used also when the RTC driver is built in or when a dependency of the
UEFI variable driver is built as a module (e.g. the driver for the SCM
interconnects).
Fixes: bba38b8748 ("rtc: pm8xxx: add support for uefi offset")
Reported-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/lkml/CAF6AEGsfke=x0p1b2-uNX6DuQfRyEjVbJaxTbVLDT2YvSkGJbg@mail.gmail.com/
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250423075143.11157-3-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
