devm_request_irq() enables the interrupt before it returns, so the handler
may run while probe is still initializing the device. Initialize the MMIO
address and spinlock before requesting the alarm IRQ.
Fixes: 0942a71e43 ("rtc: add support for spear rtc")
Cc: stable@vger.kernel.org
Assisted-by: Codex:GPT-5
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260902080318.3498434-1-runyu.xiao@seu.edu.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
devm_clk_get(&pdev->dev, "rtcref")'s return value was passed straight
into clk_get_rate() without checking it for an error first, unlike the
"rtc" clock a few lines above which is correctly checked with
IS_ERR(). clk_get_rate() only guards against a NULL clk, not an error
pointer:
if (!clk)
return 0;
...
rate = clk_core_get_rate_recalc(clk->core);
so if devm_clk_get() ever returns an error pointer here (for example
ERR_PTR(-EPROBE_DEFER), which is the normal, expected outcome if the
clkcfg clock-provider this RTC depends on has not registered its
clocks yet by the time this driver probes), clk_get_rate() dereferences
that error pointer instead of returning 0, crashing instead of letting
probe defer.
Capture the clock in the existing 'clk' local and check it with
IS_ERR() before calling clk_get_rate(), matching the handling already
used for the "rtc" clock in this same function.
Signed-off-by: Manush Prajwal <manushprajwal555@gmail.com>
Fixes: 0b31d70359 ("rtc: Add driver for Microchip PolarFire SoC")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/6a9d4b02.7d74b517.206c4c.75f8@mx.google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
ac100_rtc_register_clks() registers the RTC-32k clock with
clk_hw_register_fixed_rate() and the clock provider with
of_clk_add_hw_provider(). Neither is device managed, and both are
released only from ac100_rtc_remove(). The driver core does not call
remove() when probe() fails: really_probe() reaches probe_failed below
the device_remove() call and goes straight to releasing the device's
managed resources.
ac100_rtc_probe() ends with
return devm_rtc_register_device(chip->rtc);
so if that fails after the clocks have been registered, the provider is
left on the global of_clk_providers list holding chip->clk_data, which
was allocated with devm_kzalloc() and is freed while probe() unwinds. A
later lookup on this device tree node then reads freed memory in
of_clk_hw_onecell_get(). Consumers that do exactly that exist in tree:
the wifi power sequence nodes on sun8i-a83t-bananapi-m3 and
sun8i-a83t-cubietruck-plus take <&ac100_rtc 1>, and the sun9i-a80 boards
route osc32k through <&ac100_rtc 0>. The window is narrow, as
devm_rtc_register_device() can only fail with -ENOMEM here, but the
provider is left dangling whenever it does.
The RTC-32k clock is leaked on the same path. Since clk_core_lookup()
searches a global list that is not scoped per device, __clk_register()
rejects the duplicate name with -EEXIST, so the leak also makes a later
probe of the same device fail.
The error path that returns -EINVAL when the ADDA 4M parent clock cannot
be found leaks the RTC-32k clock in the same way. No provider has been
registered at that point, so that one is a leak rather than a
use-after-free.
Register both with devm_clk_hw_register_fixed_rate() and
devm_of_clk_add_hw_provider() so that they are released whenever the
device goes away, on a failed probe as well as on unbind. Devres
releases in reverse order of acquisition, so the provider is removed
before chip->clk_data is freed, and the clkout children are now
unregistered before their parent rather than after it.
ac100_rtc_unregister_clks() and the remove callback then have nothing
left to do and are removed.
Fixes: d00a18a42c ("rtc: ac100: Add RTC driver for X-Powers AC100")
Reported-by: Sashiko AI <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-rtc/20260905184936.155E11F00A3A@smtp.kernel.org/
Assisted-by: LLM
Signed-off-by: Aamir Ahmed <elb12345@hotmail.co.uk>
Link: https://patch.msgid.link/AS8P251MB0001A489CC45A591ABBB9BDCC8B42@AS8P251MB0001.EURP251.PROD.OUTLOOK.COM
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Commit f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero.
This occurs in ac100_rtc_register_clks() due to .num being assigned only
after every clkout clock has been stored in .hws[]. With
CONFIG_UBSAN_BOUNDS and a compiler that implements __counted_by (GCC
15.1+ or Clang 20.1+), this triggers an array-index-out-of-bounds report
during probe, and with CONFIG_UBSAN_TRAP the first store traps.
Initialize .num with AC100_CLKOUT_NUM, the number of elements .hws[] was
allocated with, right after the allocation. That is the value the loop
counter ends up at on the success path anyway, so the provider's
behaviour is unchanged.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Assisted-by: LLM
Signed-off-by: Aamir Ahmed <elb12345@hotmail.co.uk>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/AS8P251MB00013E724A77A355668B6CCEC8B42@AS8P251MB0001.EURP251.PROD.OUTLOOK.COM
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Restore the EFI RTC alarm functionality (read_alarm/set_alarm and
procfs output) that was removed by commit 18a3510bc8 ("rtc: efi:
Remove wakeup functionality").
The removal was motivated by the observation that many EFI platforms
lack RTC wakeup support while also omitting the RT_PROP table, causing
the wakeup capability to be incorrectly advertised. While that is
true, removing the feature entirely also breaks platforms where the
wakeup runtime service actually works.
On CIX SoCs, the RTC is an I2C device owned by firmware, and in the
ACPI boot configuration the I2C bus it sits on is not exposed to the
OS, so the EFI runtime services are the only way Linux can access
the RTC at all. Both Linux and Windows use this same interface by
design, so the RTC state is consistent across the operating systems
installed on the machine, and Windows relies on the EFI wakeup
services for its own RTC alarm support.
With the alarm support removed from rtc-efi, Linux loses the
equivalent capability entirely on these platforms: rtcwake fails
for both suspend-to-RAM and power-off wakeup, as there is no other
path to program the RTC alarm. This is a real product requirement
that CIX customers have explicitly requested, not a hypothetical
use case.
To avoid exposing a broken alarm on firmware that does not implement
the wakeup runtime services, probe the capability at ->probe() time by
actually calling GetWakeupTime() -- if it fails, clear RTC_FEATURE_ALARM
and the device behaves as before the removal.
Also set RTC_FEATURE_ALARM_WAKEUP_ONLY since EFI wakeup time is a
wakeup-only alarm, not a periodic/update interrupt source.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Feng Tang <feng.tang@linux.alibaba.com>
Reviewed-by: Fugang Duan <fugang.duan@cixtech.com>
Signed-off-by: Johnny.Fan <Johnny.Fan@cixtech.com>
Link: https://patch.msgid.link/20260831140014.839222-1-johnny.fan@cixtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The struct rtc_wkalrm has padding holes after the 'pending' member.
When returned to userspace via the RTC_WKALRM_RD ioctl, uninitialized
kernel stack data residing in these holes may be leaked.
Zero-initialize the struct at declaration to eliminate this information
leak risk.
Fixes smatch warnings:
- drivers/rtc/dev.c:392 rtc_dev_ioctl() warn: check that 'alarm' doesn't
leak information (struct has a hole after 'pending')
Fixes: 36e14f5fdf ("rtc: rename core files")
Assisted-by: smatch:2.0 [static analysis]
Signed-off-by: Liu Dalin <liudalin@kylinsec.com.cn>
Link: https://patch.msgid.link/B28B7DE18F3A9447+20260827015444.3314227-1-liudalin@kylinsec.com.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Subsystem:
- patchwork project is moving to kernel.org
- fully initialize clk_init_data
- add missing MODULE_DEVICE_TABLE()
- DT bindings conversions to DT schema
Drivers:
- ds1307: fix WADA bit for alarms on RX8130
- rzn1: add support for RZ/T2H and RZ/N2H, many fixes
-----BEGIN PGP SIGNATURE-----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=Br8X
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The RZN1 driver got a fairly comprehensive cleanup. More DT binding
are converted to DT schema, leaving only 5 remaining files to convert.
Subsystem:
- patchwork project is moving to kernel.org
- fully initialize clk_init_data
- add missing MODULE_DEVICE_TABLE()
- DT bindings conversions to DT schema
Drivers:
- ds1307: fix WADA bit for alarms on RX8130
- rzn1: add support for RZ/T2H and RZ/N2H, many fixes"
* tag 'rtc-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (42 commits)
MAINTAINERS: update rtc subsystem patchwork location
rtc: msc313: Select by default on MSTARV7
rtc: microcrystal: Make sure clk_init_data is fully initialized
rtc: philips: Make sure clk_init_data is fully initialized
rtc: nct3018y: Make sure clk_init_data is fully initialized
rtc: m41t80: Make sure clk_init_data is fully initialized
rtc: hym8563: Make sure clk_init_data is fully initialized
rtc: rzn1: Add support for Renesas RZ/T2H and RZ/N2H SoCs
rtc: rzn1: Drop trailing comma from OF match table sentinel
rtc: rzn1: Add OF match data to gate SUBU register access
rtc: rzn1: use FIELD_PREP/FIELD_GET and GENMASK for register access
rtc: rzn1: Consistently use dev_err_probe()
rtc: rzn1: Use temporary variable for struct device
rtc: rzn1: Dynamically calculate synchronization delay based on clock rate
rtc: rzn1: Replace remove callback with devm_add_action_or_reset()
rtc: rzn1: Use pm_runtime_put_sync()
rtc: Kconfig: Broaden RTC_DRV_RZN1 dependency to ARCH_RENESAS
rtc: rzn1: Fix malformed MODULE_AUTHOR string
rtc: rzn1: Disable alarm interrupt before reprogramming alarm registers
rtc: rzn1: Fix alarm range check truncation on 32-bit systems
...
All of the ARCH_MSTARV7 chips have this RTC so it's more likely
ARCH_MSTARV7 wants it than doesn't.
At the same time fix up the indent on the depends on line that looks
like it got converted from a tab to spaces at some point.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://patch.msgid.link/20260713133919.1356748-1-daniel@thingy.jp
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
Make sure all members are fully initialized, to avoid such bugs, and to
prevent future breakage when converting drivers to a different method
for specifying the parents.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/6e7b5258ff73e93fe23dd83cf56f806ee60fa7a9.1787241693.git.geert+renesas@glider.be
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
Make sure all members are fully initialized, to avoid such bugs, and to
prevent future breakage when converting drivers to a different method
for specifying the parents.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/8281eaf605069aac2211d83233e11285b8e8ca84.1787241693.git.geert+renesas@glider.be
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
Make sure all members are fully initialized, to avoid such bugs, and to
prevent future breakage when converting drivers to a different method
for specifying the parents.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/6dba18b645aeea279a67f4625d5ec48037c76f0c.1787241693.git.geert+renesas@glider.be
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
Make sure all members are fully initialized, to avoid such bugs, and to
prevent future breakage when converting drivers to a different method
for specifying the parents.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/c5290fb9a28b45d6bcec724d5897f8bcbf96ea50.1787241693.git.geert+renesas@glider.be
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
Make sure all members are fully initialized, to avoid such bugs, and to
prevent future breakage when converting drivers to a different method
for specifying the parents.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/657f2b3a871074087aee0b7a70bf527ab0f48da8.1787241693.git.geert+renesas@glider.be
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for the RTC block found on the Renesas RZ/T2H (R9A09G077)
and RZ/N2H (R9A09G087) SoCs.
These SoCs integrate a closely related variant of the RZ/N1 RTC IP, but
do not implement the RTCA0SUBU register. Use variant-specific match data
to disable SUBU support for these SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-18-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Drop the trailing comma from the final empty entry in the RZN1 RTC OF
match table and mark it explicitly as the sentinel.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-17-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RZ/N1 RTC driver selects SCMP mode only when an optional xtal clock
is provided at a valid rate other than 32768 Hz. Without an xtal clock,
or when it runs at 32768 Hz, the driver uses SUBU mode.
However, the RTCA0SUBU register used by SUBU mode is not present on all
SoCs that integrate a similar variant of the RTC block. Allowing SUBU
mode on those variants would expose RTC offset operations that access a
non-existent register.
Add OF match data to describe whether the RTC supports the SUBU register.
Reject probe with -EOPNOTSUPP when SUBU mode would be selected on a
variant without SUBU support.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Suggested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-16-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace open-coded shift and mask operations with the bitfield API.
Note that the weekday field is changed from an explicit 0x0f mask to
an 8-bit field definition, matching the hardware manual. This does not
change behaviour, as valid weekday values cannot exceed 7.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-15-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use dev_err_probe() in the IRQ request error path to make error handling
consistent with the rest of rzn1_rtc_probe().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-14-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use a temporary variable for the struct device pointers to avoid
dereferencing.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-13-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace the hardcoded hardware synchronization delays with a calculated
time window derived from the operating sub-clock frequency.
The driver currently hardcodes microsecond ranges assuming a fixed
sub-clock frequency of 32.768 kHz. Newer SoC variants, such as the
RZ/T2H, drive this hardware block using a much faster clock rate
(~195.3 kHz). Hardcoding these wait windows forces faster blocks to
over-sleep, introducing unnecessary delays during clock initialization
and register configuration.
Calculate the duration of the required clock cycles in microseconds based
on the runtime clock rate, and store this value in the driver private
structure to adjust the usleep_range() and readl_poll_timeout() boundaries
dynamically.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-12-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Simplify the driver teardown by registering a managed cleanup action with
devm_add_action_or_reset(). This eliminates the explicit probe error path
and allows the .remove() callback to be dropped.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-11-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
pm_runtime_put() may trigger the idle check after pm_runtime_disable()
is run as part of devm_pm_runtime_enable()'s cleanup action, leaving
runtime PM active.
Use pm_runtime_put_sync() to ensure the idle check runs synchronously.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace the ARCH_RZN1 dependency with ARCH_RENESAS for the RTC_DRV_RZN1
config option to make the driver available across both ARM32 and ARM64
Renesas architectures.
The newer RZ/T2H and RZ/N2H ARM64 SoCs integrate a closely related variant
of the RTC IP block found on the RZ/N1 SoCs. Update the build dependency
and expand the Kconfig help text to allow this driver to be selected for
these additional platforms.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix a malformed MODULE_AUTHOR macro in the rtc-rzn1 driver where a missing
closing angle bracket on the second author entry creates an invalid format.
Correct it to the standard "Name <email>" format.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rzn1_rtc_set_alarm() updates RZN1_RTC_ALM, RZN1_RTC_ALH and
RZN1_RTC_ALW using separate MMIO writes without first disabling the
alarm interrupt. If a previous alarm is still enabled, the interrupt
can fire while the alarm registers contain a mixture of old and newly
written values.
Fix this by disabling the alarm interrupt before reprogramming ALM, ALH
and ALW with a call to rzn1_rtc_alarm_irq_enable().
Fixes: b5ad1bf00d ("rtc: rzn1: Add alarm support")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
alarm and farest were declared as unsigned long, but
rtc_tm_to_time64() returns time64_t (s64). On 32-bit systems where
unsigned long is 32 bits, the assignment silently truncates the upper
32 bits of the timestamp.
Fix by declaring alarm and farest as time64_t and replacing
time_after() with a direct signed comparison, which is correct for
time64_t values that will never realistically overflow.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
RZN1_RTC_ALW is a weekday bitmask where bit N represents weekday N.
When no alarm has been configured, the register has its power-on-reset
value of zero.
rzn1_rtc_read_alarm() uses fls() to convert the weekday bitmask into a
weekday number. When RZN1_RTC_ALW is zero, fls(0) returns zero and
fls(wday) - 1 evaluates to -1. This invalid weekday is then used to
calculate the alarm date and can either leave tm_wday set to -1 or
produce a fabricated alarm date.
Treat a zero RZN1_RTC_ALW value as an unset alarm weekday and return
without calculating the alarm date. Move reading RZN1_RTC_CTL1 before
this check so that alrm->enabled is updated for both configured and
unconfigured alarms.
Fixes: b5ad1bf00d ("rtc: rzn1: Add alarm support")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rzn1_rtc_set_alarm() calculates the alarm weekday from the difference
between the alarm day and the current day of the month. When the alarm
crosses a month boundary, this difference can become negative. Since
days_ahead is unsigned, it underflows and results in an incorrect
weekday being programmed into RZN1_RTC_ALW.
The RTC core already provides a fully populated struct rtc_time for
the alarm, including the correct tm_wday. Use tm->tm_wday directly
instead of recalculating the weekday from the day-of-month.
This avoids the underflow and ensures alarms scheduled across a month
boundary use the correct weekday.
Fixes: b5ad1bf00d ("rtc: rzn1: Add alarm support")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Suggested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Check for -EPROBE_DEFER from platform_get_irq_byname_optional() and handle
the deferred probe request properly.
Although the "pps" interrupt is optional, an error code of -EPROBE_DEFER
indicates that the interrupt subsystem is not yet ready. Intercept this
specific error condition, assign it to the return value, and jump to the
dis_runtime_pm label to avoid ignoring a valid probe deferral.
Fixes: eea7791e00 ("rtc: rzn1: implement one-second accuracy for alarms")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The probe() function ignores errors returned by regmap operations.
If an I2C transport error occurs (e.g., -ENXIO), the driver continues
probing and may register a non-functional RTC device.
Propagate errors from all unchecked regmap calls in probe() using
dev_err_probe().
Fixes: fd9a6a1394 ("rtc: pcf85363: add support for the quartz-load-femtofarads property")
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Link: https://lore.kernel.org/linux-rtc/20260716125142.1801599-1-chou.cosmo@gmail.com/
Link: https://patch.msgid.link/20260717193705.2003175-1-chou.cosmo@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
gamecube_rtc_probe() ignored the return value of
devm_rtc_register_device() and always returned success. Propagate the
error so probe fails when RTC registration fails.
Fixes: 86559400b3 ("rtc: gamecube: Add a RTC driver for the GameCube, Wii and Wii U")
Signed-off-by: Linkai Gong <gonglinkai@kylinos.cn>
Link: https://patch.msgid.link/20260731080458.417532-1-gonglinkai@kylinos.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RX8130 wakeup alarm never fired when set via
/sys/class/rtc/rtc0/wakealarm. The root cause is that the WADA bit
(bit 3) in the Extension register (0x1c) was never set before
programming the alarm registers.
Per the RX8130 datasheet:
WADA=0 - Week alarm: register 0x19 is compared against day-of-week
WADA=1 - Day alarm: register 0x19 is compared against day-of-month
rx8130_set_alarm() always writes a BCD day-of-month value to alarm
register 0x19, so WADA must be 1. With WADA=0 the hardware matched the
day-of-month value (e.g. 15) as a day-of-week index, which is always
out of range (valid weekdays are 0-6), so the alarm interrupt was never
asserted.
Fix by setting the WADA bit in rx8130_set_alarm() before writing the
Extension register back to the device.
This is consistent with rx8130_read_alarm(), which decodes the same
register under the same assumption (24-hour and day-of-month mode).
Signed-off-by: Robert Leussler <robert.leussler@leica-geosystems.com>
Link: https://patch.msgid.link/20260721081907.3518648-1-robert.leussler@leica-geosystems.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://patch.msgid.link/20260723184538.3888637-30-ekffu200098@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace irq_of_parse_and_map() with platform_get_irq(), which resolves
the interrupt from pdev->dev.of_node directly and returns a positive IRQ
or a negative errno (it never returns 0). Propagate the error on failure
instead of the previous open-coded "IRQ missing or invalid" / -EINVAL
message, so -EPROBE_DEFER is handled correctly. The rtc->irq field is a
signed short, so the negative error code is preserved.
np is still used by of_property_read_u32() for "st,lpc-mode", so it is
not removed.
Built for ARM (multi_v7_defconfig + CONFIG_RTC_DRV_ST_LPC) with LLVM=1;
drivers/rtc/rtc-st-lpc.o compiles cleanly.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20260714002259.1392655-1-rosenp@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Since the driver allocates the IRQ using devm_request_irq(), this means the
IRQ is going to be automatically unregistered by devres after
mv_rtc_remove() returns.
However, mv_rtc_remove() explicitly disables the hardware clock before
devres teardown happens so the interrupt handler may run while the clock is
disabled leading to a possible bus hang when accessing registers.
Link: https://patch.msgid.link/20260625130202.1621692-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver has a match table for the i2c bus wired into its driver
structure, but the table is not exported with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE() entry so module alias information
is generated for automatic module loading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the driver registration structure, and the missing module alias
publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704152528.53258-1-pengpeng@iscas.ac.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704121734.54941-1-pengpeng@iscas.ac.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Link: https://patch.msgid.link/20260704122003.70108-1-pengpeng@iscas.ac.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
devm_clk_get_optional() returns NULL when the optional clock is absent,
but returns an ERR_PTR when the clock provider lookup fails. Probe
currently keeps the ERR_PTR and then passes it to clk_get_rate().
Return the lookup error instead. A truly absent optional clock still
reaches the existing calibration fallback through clk_get_rate(NULL).
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Fixes: 07dcc6f9c7 ("rtc: zynqmp: Add calibration set and get support")
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260624055524.38522-1-pengpeng@iscas.ac.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Symbolic permissions S_IRUGO and S_IWUSR are deprecated in favor of
octal permissions. Replace S_IRUGO|S_IWUSR with 0644 and S_IRUGO
with 0444.
Signed-off-by: Jack Lee <skunkolee@gmail.com>
Link: https://patch.msgid.link/20260612223534.77412-1-skunkolee@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
p1_rtc_read_time() called if (!regmap_test_bits(regmap, RTC_CTRL, RTC_EN))
to check if the RTC was enabled.
regmap_test_bits() returns 1 if the bit is set, 0 if not set, and a
negative error code (e.g. -EIO) if reading the control register fails.
Using !regmap_test_bits(...) evaluates a negative error code as boolean
false, causing I2C/regmap read failures to be ignored and incorrectly
proceeding to read time registers from a failing device.
Fix this by capturing the return value of regmap_test_bits() and returning
the error code if negative, or -EINVAL if the RTC is disabled.
Fixes: a6de182daa ("rtc: spacemit: support the SpacemiT P1 RTC")
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Surendra Singh Chouhan <kr494167@gmail.com>
Link: https://patch.msgid.link/20260724135803.81223-1-kr494167@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
pcf8563_clkout_register_clk() registers the CLKOUT clock provider with
of_clk_add_provider(), but nothing ever unwinds it: there is no
of_clk_del_provider() call and the driver has no remove callback. Each
of_clk_add_provider() allocates a struct of_clk_provider, takes a
reference on the OF node and adds an entry to the global of_clk_providers
list, none of which is released when the device is unbound. Every
bind/unbind (or module reload) therefore leaks a provider structure and
an of_node reference.
The clock itself is already device-managed (devm_clk_register()); only
the provider registration was not. Use devm_of_clk_add_hw_provider() so
the provider is removed automatically on unbind. Tie it to the parent
i2c device, whose OF node carries the #clock-cells and clock-output-names
properties (the RTC class device has no OF node of its own).
Fixes: a39a6405d5 ("rtc: pcf8563: add CLKOUT to common clock framework")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Yi Ding <yi.s.ding@gmail.com>
Link: https://patch.msgid.link/20260602035135.62264-1-yi.s.ding@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for ds1307,
fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes
-----BEGIN PGP SIGNATURE-----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=SCOZ
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Most of the work and improvements are for features of the m41t93.
The ds1307 also gets support for OSF (Oscillator Stop Flag) for
new variants.
The pcap driver is being removed as the Motorola EZX support was
removed a while ago.
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
ds1307, fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes"
* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
rtc: s35390a: fix typo in comment
rtc: cmos: unregister HPET IRQ handler on probe failure
rtc: ds1307: Fix off-by-one issue with wday for rx8130
dt-bindings: rtc: ds1307: Add epson,rx8901
rtc: bq32000: add delay between RTC reads
rtc: m41t93: Add watchdog support
rtc: m41t93: Add square wave clock provider support
rtc: m41t93: Add alarm support
rtc: m41t93: migrate to regmap api for register access
rtc: m41t93: add device tree support
dt-bindings: rtc: Add ST m41t93
rtc: ds1307: add support for clock provider in ds1307
rtc: mv: add suspend/resume support for wakeup
rtc: aspeed: add AST2700 compatible
dt-bindings: rtc: add ASPEED AST2700 compatible
rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
rtc: msc313: fix NULL deref in shared IRQ handler at probe
rtc: remove unused pcap driver
...
The CONFIG_RTC_DRV_DS1307_HWMON macro was removed in favor of
CONFIG_HWMON in commit 6b583a64fd ("rtc: ds1307: simplify hwmon
config"), but a reference to it remained in a comment. Correct this
reference.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260610054723.261008-1-enelsonmoore@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
cmos_do_probe() registers cmos_interrupt() as the HPET RTC IRQ
handler before requesting the RTC IRQ and registering the RTC
device. If either request_irq() or devm_rtc_register_device()
fails afterwards, the error path leaves the HPET RTC IRQ handler
installed. This leaves a stale handler behind and make a later
hpet_register_irq_handler() fail with -EBUSY.
Track whether the HPET handler was registered successfully and
undo the registration on the probe error path. Also mask the HPET
RTC IRQ bits to match the normal shutdown cleanup.
Fixes: 9d8af78b07 ("rtc: add HPET RTC emulation to RTC_DRV_CMOS")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20260623100848.2127281-1-haoxiang_li2024@163.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC represent each weekday with a individual bit set in the WDAY
register, where the 0th bit represent the first day of the week and the
6th bit represents the last day of the week. For each passed day the
chip performs a rotary-left-shift by one to advance the weekday by one.
The tm_wday field represent weekdays by a value in the range of 0-6.
The fls() function return the bit index of the last bit set. To handle
when there are no bits set it will return 0, and if the 0th bit is set
it will return 1, and if the 1st bit is set it will return 2, and so on.
In order to make the result of the fls() function fall into the expected
range of 0-6 (instead of 1-7) this patch subtracts one from the result
(which matches how the value is written in ds1307_set_time()).
Fixes: 204756f016 ("rtc: ds1307: Fix wday settings for rx8130")
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>
Signed-off-by: Fredrik M Olsson <fredrik.m.olsson@axis.com>
Link: https://patch.msgid.link/20260520-ds1307-rx8901-add-v2-2-e069ea32e1db@axis.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When the RTC is used on systems without a interrupt line, userspace
tools like `hwclock` fall back to a frequent polling loop to synchronize
with the edge of the next second.
On the BQ32000, this aggressive polling can temporarly lock the register
refresh cycle, because the continuous transfers prevent the hardware from
updating the buffer. This results in stale data reads or select() timeouts
in userspace.
This patch introduces a delay before reading the RTC registers in order to
provide a sufficient idle time for the hardware to sync with the register
buffer.
Signed-off-by: Adriana Stancu <adriana@arista.com>
Link: https://patch.msgid.link/20260416142151.3385827-1-adriana@arista.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
