Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
This patch-set convert many functions to snd_soc_dapm_xxx().
This is preparation to move struct snd_soc_dapm_context into soc-dapm.c.
For backport easy, this patch-set is added for each drivers.
For 'always-on' and 'boot-on' regulators, the set_machine_constraints()
may enable supply before enabling the main regulator, however if the
latter fails, the function returns with an error but the supply remains
enabled.
When this happens, the regulator_register() function continues on the
error path where it puts the supply regulator. Since enabling the supply
is not balanced with a disable call, a warning similar to the following
gets issued from _regulator_put():
[ 1.603889] WARNING: CPU: 2 PID: 44 at _regulator_put+0x8c/0xa0
[ 1.603908] Modules linked in:
[ 1.603926] CPU: 2 UID: 0 PID: 44 Comm: kworker/u16:3 Not tainted 6.18.0-rc4 #0 NONE
[ 1.603938] Hardware name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7 (DT)
[ 1.603945] Workqueue: async async_run_entry_fn
[ 1.603958] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.603967] pc : _regulator_put+0x8c/0xa0
[ 1.603976] lr : _regulator_put+0x7c/0xa0
...
[ 1.604140] Call trace:
[ 1.604145] _regulator_put+0x8c/0xa0 (P)
[ 1.604156] regulator_register+0x2ec/0xbf0
[ 1.604166] devm_regulator_register+0x60/0xb0
[ 1.604178] rpm_reg_probe+0x120/0x208
[ 1.604187] platform_probe+0x64/0xa8
...
In order to avoid this, change the set_machine_constraints() function to
disable the supply if enabling the main regulator fails.
Fixes: 05f224ca66 ("regulator: core: Clean enabling always-on regulators + their supplies")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20251107-regulator-disable-supply-v1-1-c95f0536f1b5@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20251107085109.2316999-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106142914.227875-1-marco.crivellari@suse.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The validator is not happy:
Warning: drivers/regulator/pf9453-regulator.c:303 This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Update the kernel-doc accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251106114628.2302762-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series adds support for three new MediaTek PMICs: MT6316, MT6363
and MT6373 and their variants - used in board designs featuring the
MediaTek MT8196 Chromebook SoC, or the MT6991 Dimensity 9400 Smartphone
SoC.
In particular, MT6316 is a regulator, but the MT6363 and MT6373 PMICs
are multi-function devices, as they have and expose multiple sub-devices;
moreover, some of those also contain an interrupt controller, managing
internal IPs interrupts: for those, a chained interrupt handler is
registered, which parent is the SPMI controller itself.
This series adds support for all of the MT6316 regulator variants and
for MT6363, MT6373 SPMI PMICs and their interrupt controller.
Add a driver for the regulators found on the MT6363 PMIC, fully
controlled by SPMI interface.
This PMIC regulates voltage with an input range of 2.6-5.0V, and
features 10 buck converters and 26 LDOs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251027110527.21002-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a driver for the regulators found on all types of the MediaTek
MT6316 SPMI PMIC, fully controlled by SPMI interface and featuring
four step down DCDC (buck) converters.
In particular, this includes support for:
- MT6316(BP/VP): 2+2 Phase (Phase 1: buck1+2, Phase 2: buck3+4)
- MT6316(CP/HP/KP): 3+1 Phase (Phase 1: buck1+2+4, Phase 2: buck3)
- MT6316(DP/TP): 4+0 Phase (Single phase, buck1+2+3+4)
Please note that the set/clear registers for the enable bits are
not documented in the datasheet version that I used as reference,
but those are used in the downstream driver and I verified that
are actually working as expected.
Besides, it's also worth clearly mentioning that the MT6316 PMICs
voltage selector register uses a weird 9-bits Big Endian format,
for which a driver-private helper is provided.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251027110527.21002-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the commit referenced by the Fixes tag,
devm_gpiod_get_optional() was replaced by manual
GPIO management, relying on the regulator core to release the
GPIO descriptor. However, this approach does not account for the
error path: when regulator registration fails, the core never
takes over the GPIO, resulting in a resource leak.
Add gpiod_put() before returning on regulator registration failure.
Fixes: 5e6f3ae5c1 ("regulator: fixed: Let core handle GPIO descriptor")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251028172828.625-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Joy Zou <joy.zou@nxp.com>:
For the details, please check the patch commit log.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Joy Zou (3):
regulator: pf9453: change the device ID register address
regulator: pf9453: remove low power mode
regulator: pf9453: remove unused I2C_LT register
drivers/regulator/pf9453-regulator.c | 22 +---------------------
1 file changed, 1 insertion(+), 21 deletions(-)
---
base-commit: 98bd8b16ae57e8f25c95d496fcde3dfdd8223d41
change-id: 20251103-b4-next-pf9453-c9f8fb6e0c10
Best regards,
--
Joy Zou <joy.zou@nxp.com>
Remove unnecessary register OTP_Ver and change the device ID address to
0x1. Previous version chip is never mass production. So not broken
compatibility.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Link: https://patch.msgid.link/20251103-b4-next-pf9453-v1-1-a025d536eee1@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .min_sel and .max_sel fields remained uninitialized in the new
linear_range, causing an error further down the line. Copy the old
values of these fields to the new one as they represent the range of
register values, which does not change.
Fixes: d2ad981151 ("regulator: bd718x7: Support external connection to scale voltages")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20251030-mini_iv-v3-2-ef56c4d9f219@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Oleksij Rempel <o.rempel@pengutronix.de>:
This series adds input supply definitions for the NXP PCA9450 PMIC.
Some systems detect power events such as undervoltage before the PMIC.
To allow correct propagation of such events, each regulator must define
its upstream input supply. The first patch updates the devicetree
binding to document new *-supply properties, and the second patch adds
matching .supply_name entries in the driver.
Changes in this series:
- Document INL1, INB13, INB26 and INB45 supply properties
- Link all LDO and BUCK regulators to their corresponding input groups
Add supply_name entries for all PCA9450 regulators to describe their
respective input pin groups (INB13, INB26, INB45, INL1). This links each
buck and LDO to the upstream supply that powers its input group.
On some systems, power faults such as undervoltage are detected before
the PMIC itself. Defining supply relationships allows the regulator
framework to propagate such events properly through the dependency
chain.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251027124415.989301-3-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The Raspberry Pi drivers aren't useful on other architectures, so
only offer them on ARM and ARM64, except for build testing purposes.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://patch.msgid.link/20251027132219.2f3274f0@endymion
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for PMR735D PMIC voltage regulators which are present on
Kaanapali boards.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023-pmr735d_regulator-v2-2-452e1b28cd38@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add regulator support for the pf1550 PMIC.
Signed-off-by: Samuel Kayode <samuel.kayode@savoirfairelinux.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20251001-pf1550-v12-3-a3302aa41687@savoirfairelinux.com
Signed-off-by: Lee Jones <lee@kernel.org>
Merge series from Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>:
This series contains patches to update rpmh-regulator driver and
dt-bindings for supporting the PMIC voltage regulators present on the
boards with Qualcomm's next gen compute SoC - Glymur.
Device tree changes aren't part of this series and will be posted
separately after the official announcement of the Glymur SoC.
Initialize input regulator and gpios to proper values to have things
basically working as well as in the case when these things are
hardwired.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Andreas Kemnade <akemnade@kernel.org>
Link: https://patch.msgid.link/20250917-sy7636-rsrc-v3-2-331237d507a2@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for PMH0101/PMCX0102/PMH0110/PMH0104 PMIC voltage
regulators which are present on Glymur boards.
Introduce new LDOs & SMPSs under them (PMIC5 subtype 530 for
both).
For these new LDOs support a new optimum power mode(OPM). In
this mode LDO will automatically switch between high power mode
(HPM) and low power mode (LPM) based on the real-time LDO load
current. Its operation is analogous to SMPS AUTO mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-4-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently rpmh-regulator resource name inside CMD-DB follows this
format: `^(ldo|smp|bob|vs)[a-n][1-9][0-9]?$`
(eg - ldob11, smpa2, bobc1 etc)
Here `[a-n]` in the resource name signifies the `pmic-id`.
However, newer firmware follows a different format that also
includes the `bus_id` as well in the resource name.
New format:
`^(L|S|B)[1-9][0-9]?[A-N]_E[0-3]$`
(eg - L11B_E1, S2A_E0, B1C_E0 etc)
Here `_E[0-3]` at the end is the `bus_id`, and upper case `[A-N]`
is used to denote `pmic-id`, while the regulator `(ldo|smp|bob)`
is replaced with their initials in upper case `(L|S|B|VA)`.
To handle this properly, do the following:
- Remove the `resource_name` member from vreg init data
- Add `index` and `regulator_hw_type` new members, which will
contain the index number and the regulator hardware type
(SMPS/LDO/BOB/VS) which can be combined with the pmic-id read
from the devicetree to generate the resource_name.
- Choose new resource name format if `pmic-id` contains `_E`
in it, else fallback to old format.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-3-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Forward critical supply events downstream so consumers can react in
time. An under-voltage event on an upstream rail may otherwise never
reach end devices (e.g. eMMC).
Register a notifier on a regulator's supply when the supply is resolved,
and forward only REGULATOR_EVENT_UNDER_VOLTAGE to the consumer's notifier
chain. Event handling is deferred to process context via a workqueue; the
consumer rdev is lifetime-pinned and the rdev lock is held while calling
the notifier chain. The notifier is unregistered on regulator teardown.
No DT/UAPI changes. Behavior applies to all regulators with a supply.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251001105650.2391477-1-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This round of updates contains a fair amount of new device support, a couple of fixes and
some refactoring. The most notable additions include new drivers for Loongson's Security
Engine, RNG and TPM, new drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a refactoring to use a more modern
GPIO API for the VEXPRESS sysreg driver, the removal of a deprecated IRQ ACK function from the
MC13xxx RTC driver and a new DT binding for the aforementioned TI BQ257xx charger.
New Support & Features
- Add a suite of drivers for the Loongson Security Engine, including the core controller, a
Random Number Generator (RNG) and Trusted Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including the input driver, MFD
cell registration, and a system power-off handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs, including the core MFD
driver and a power supply driver for the charger functionality.
Improvements & Fixes
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS sysreg driver to prevent
potential silent failures.
Cleanups & Refactoring
- Add a MAINTAINERS entry for the new Loongson Security Engine drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO chip API.
Removals
- Remove the deprecated and unused mc13xxx_irq_ack() function from the MC13xxx RTC, input and
touchscreen drivers.
Device Tree Bindings Updates
- Add device tree bindings for the TI BQ25703A charger.
-----BEGIN PGP SIGNATURE-----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=h21C
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"This round of updates contains a fair amount of new device support, a
couple of fixes and some refactoring. The most notable additions
include new drivers for Loongson's Security Engine, RNG and TPM, new
drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a
refactoring to use a more modern GPIO API for the VEXPRESS sysreg
driver, the removal of a deprecated IRQ ACK function from the MC13xxx
RTC driver and a new DT binding for the aforementioned TI BQ257xx
charger.
New Support & Features:
- Add a suite of drivers for the Loongson Security Engine, including
the core controller, a Random Number Generator (RNG) and Trusted
Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including
the input driver, MFD cell registration, and a system power-off
handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs,
including the core MFD driver and a power supply driver for the
charger functionality.
Improvements & Fixes:
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS
sysreg driver to prevent potential silent failures.
Cleanups & Refactoring:
- Add a MAINTAINERS entry for the new Loongson Security Engine
drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO
chip API.
Removals:
- Remove the deprecated and unused mc13xxx_irq_ack() function from
the MC13xxx RTC, input and touchscreen drivers.
Device Tree Bindings Updates:
- Add device tree bindings for the TI BQ25703A charger"
* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
dt-bindings: watchdog: Add SMARC-sAM67 support
dt-bindings: mfd: tps6594: Allow gpio-line-names
mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
mfd: 88pm886: Add GPADC cell
mfd: vexpress-sysreg: Use more common syntax for compound literals
mfd: rz-mtu3: Fix MTU5 NFCR register offset
mfd: max77705: Setup the core driver as an interrupt controller
mfd: cs42l43: Remove IRQ masking in suspend
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
mfd: bd71828, bd71815: Prepare for power-supply support
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
dt-bindings: mfd: fsl,mc13xxx: Add buttons node
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
mfd: macsmc: Add "apple,t8103-smc" compatible
...
The current entry for the MAX77838 regulator is unselectable (as it
depended on a non-user-selectable config - REGMAP_I2C). Fix this by
making it select the config, and not depending on it.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://patch.msgid.link/20250917-maxreg-kconfig-fix-v1-1-1369f88d6272@mentallysanemainliners.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the regulators found in the SpacemiT P1 PMIC. This
PMIC provides 6 buck converters and 12 LDO regulators.
The PMIC is implemented as a multi-function device. These regulators
are probed based on this driver being named in a MFD cell in the simple
MFD I2C driver.
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250825172057.163883-4-elder@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>:
This patchset adds support for the max77838 PMIC. It's used on the Galaxy
S7 lineup of phones, and provides regulators for the display.
The max77838 PMIC contains a BUCK regulator and 4 LDOs. It's primarily
used in the Samsung Galaxy S7 lineup and is accessed over I2C.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://patch.msgid.link/20250914130230.2622030-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the boost regulator found in the Texas Instruments
BQ25703. The boost regulator is capable of outputting between 4.48
and 20.8 volts and between 0 and 6.35 amps.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250904160530.66178-5-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Attach the power good gpio to the regulator device devres instead of the
parent device to fix problems if probe is run multiple times
(rmmod/insmod or some deferral).
Fixes: 8c485bedfb ("regulator: sy7636a: Initial commit")
Signed-off-by: Andreas Kemnade <akemnade@kernel.org>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Message-ID: <20250906-sy7636-rsrc-v1-2-e2886a9763a7@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Woodrow Douglass <wdouglass@carnegierobotics.com>:
I wrote this driver to read settings and state from the nxp pf530x
regulator. Please consider it for inclusion, any criticism is welcome.
This driver allows reading some regulator settings and adjusting
output voltage. It is based on information from the datasheet
at https://www.nxp.com/docs/en/data-sheet/PF5300.pdf
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Message-ID: <20250902-pf530x-v7-2-10eb2542f944@carnegierobotics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the 'ret' variable from u32 to int to store negative error codes or
zero returned by of_property_read_u32().
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: 0fbeae70ee ("regulator: add SCMI driver")
Link: https://patch.msgid.link/20250829101411.625214-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Message-ID: <20250828122737.43488-1-liaoyuanhong@vivo.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the current design, the `pm8008_regulator_get_voltage_sel()` callback
can return a negative value if the raw voltage value is read as 0 uV from
the PMIC HW register. This can cause the probe to fail when the
`machine_constraints_voltage()` check is called during the regulator
registration flow.
Fix this by using the helper `regulator_map_voltage_linear_range()` to
convert the raw value to a voltage selector inside the mentioned get
voltage selector function. This ensures that the value returned is always
within the defined range.
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Message-ID: <20250823-pm8008-negitive-selector-v1-1-52b026a4b5e8@quicinc.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The "priv->cdata" pointer isn't an error pointer; this should be a NULL
check instead. Otherwise it leads to a NULL pointer dereference in the
caller, rt5133_probe().
Fixes: 714165e1c4 ("regulator: rt5133: Add RT5133 PMIC regulator Support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aKMc1oK-7yY4cD3K@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a copy and paste error and we accidentally use "PTR_ERR(rdev)"
instead of "error". The "rdev" pointer is valid at this point.
Also there is no need to print the error code in the error message
because dev_err_probe() already prints that. So clean up the error
message a bit.
Fixes: 38c9f98db2 ("regulator: tps65219: Add support for TPS65215 Regulator IRQs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aKRGmVdbvT1HBvm8@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace calls of 'devm_kzalloc(dev, count * sizeof([type]), flags)'
with 'devm_kcalloc(dev, count, sizeof([type]), flags)' in
setup_feedback_loop() for safer memory allocation with built-in
overflow protection.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250817142327.174531-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With module test, there is error dump:
------------[ cut here ]------------
notifier callback pca9450_i2c_restart_handler already registered
WARNING: kernel/notifier.c:23 at notifier_chain_register+0x5c/0x88,
CPU#0: kworker/u16:3/50
Call trace:
notifier_chain_register+0x5c/0x88 (P)
atomic_notifier_chain_register+0x30/0x58
register_restart_handler+0x1c/0x28
pca9450_i2c_probe+0x418/0x538
i2c_device_probe+0x220/0x3d0
really_probe+0x114/0x410
__driver_probe_device+0xa0/0x150
driver_probe_device+0x40/0x114
__device_attach_driver+0xd4/0x12c
So use devm_register_sys_off_handler to let kernel handle the resource
free to avoid kernel dump.
Fixes: 6157e62b07 ("regulator: pca9450: Add restart handler")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250815-pca9450-v1-1-7748e362dc97@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT5133 is a highly-integrated chip. It includes 8 LDOs and 3 GPOs that can
be used to drive output high/low purpose. The dependency of the GPO block is
internally LDO1 Voltage.
Signed-off-by: Jeff Chang <jeff_chang@richtek.com>
Link: https://patch.msgid.link/20250813020910.2977555-2-jeff_chang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Joy Zou <joy.zou@nxp.com>:
Add binding document and driver.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Changes in v3:
binding part
- change regulator node names into lowercase.
- add more description for nxp,i2c-crc-enable.
- remove the unnecessary nxp,dvs-run/standby-voltage property.
These changes come from review comments:
https://lore.kernel.org/imx/e9f38e38-7df7-4d19-b5c0-2f18aeebcc78@kernel.org/
- add regulator-state-mem property for example.
driver part
- convert to use maple tree register cache.
- change of_match_ptr() name to lowercase since dt-binding changed.
- add more nxp,i2c-crc-enable description for commit message.
- remove the of_parse_cb and dvs from pf0900_regulators since the
unnecessary property nxp,dvs-run/standby-voltage removed.
- add set_suspend_enable/disable/voltage for the SW regulator_ops.
the run/standby voltage can be adjusted via the API which regulator
driver provides is recommended.
These changes come from binding review comments:
https://lore.kernel.org/imx/e9f38e38-7df7-4d19-b5c0-2f18aeebcc78@kernel.org/
- add bitfield.h header due to build issue.
- correct the sw4 id.
- add PF0900 prefix for short macro define in order to avoid duplication.
- merge the same mask define in order to simplify code.
- Link to v2: https://lore.kernel.org/r/20250721-b4-pf09-v2-v2-0-e2c568548032@nxp.com
Changes in v2:
binding part
- modify the binding file name to match compatible string.
- add one space for dt_binding_check warning.
- remove unnecessary quotes from "VAON".
- remove the unnecessary empty line.
- move unevaluatedProperties after the $ref.
- move additionalProperties after regulator type.
- remove unnecessary regulator description
driver part
- modify the copyright comment block to C++ style.
- add reg_read/write for regmap_bus.
- remove original pf0900_pmic_read/write.
- remove many regulator operations.
- use regmap_read replace pf0900_pmic_read.
- use regmap_update_bits and regmap_write_bits replace pf0900_pmic_write.
- move the code from pf0900.h to pf0900-regulator.c and delete the header file.
- remove unmask status interrupts and add unmask regulator interrupts.
- remove many interrupts check warning print from irq_handler.
- add notifier for regulator event.
- remove unused macro define.
- add PF0900 prefix for IRQ macro define in order to avoid duplication.
- use GENMASK() and BIT() to replace mask marco define
- remove redundant enum pf0900_chip_type.
- remove redundant print info and comments.
- add dvs property present check because this property is optional.
- remove ret == -EINVAL check from sw_set_dvs() function.
- Link to v1: https://lore.kernel.org/imx/20250617102025.3455544-1-joy.zou@nxp.com/
---
Joy Zou (2):
dt-bindings: regulator: add PF0900 regulator yaml
regulator: pf0900: Add PMIC PF0900 support
.../devicetree/bindings/regulator/nxp,pf0900.yaml | 163 ++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/pf0900-regulator.c | 975 +++++++++++++++++++++
4 files changed, 1147 insertions(+)
---
base-commit: 84b92a499e7eca54ba1df6f6c6e01766025943f1
change-id: 20250714-b4-pf09-v2-91cdee6d1272
Best regards,
--
Joy Zou <joy.zou@nxp.com>
devm_kzalloc() has already been initialized to full 0 space, there is no
need to use memset() to initialize again.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250807123949.495193-1-liaoyuanhong@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250729040044.1851988-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes an issue with the newly added code for handling large voltage
changes on regulators which require that individual voltage changes
cover a limited range, the check for convergence was broken.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiV71cACgkQJNaLcl1U
h9BT/wf/RFUziTbJP13+I+Ce+BixwFOfTJ2+aE2xlCWAd8eyylxdOvZwRaxiiU8K
2o8mfyVpGitROyEgsuXDqiel1hFTSVpuFzT8NhGe9tc5RC+UtF1nuygsMvPAuUlR
cyrGF4aUSsEGr5R37lZh6dC/kJDHOxoQy+YEk9ngnnfWlddpHJsQMulWU3MIVAaG
IZ3KVQeZeEpCNkgKr50IG/TQh9bX8Dct/EPSxKhR4EjaKXvEyKcrMnbQpb7h7dxN
dUFpKk99EKpC6uI7jLIwUgIA4CCN8h2g0+B10zo4Kp2AQLltGs/H/gZJSCzKzEv8
3UTeyBz8Uzr4srsKRBiP8woqA6hjoA==
=xTjP
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"This fixes an issue with the newly added code for handling large
voltage changes on regulators which require that individual voltage
changes cover a limited range, the check for convergence was broken"
* tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: correct convergence check in regulator_set_voltage()
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The logic in regulator_set_voltage() which checks for a non-convergence
condition on a stepped regulator is flawed.
regulator_set_voltage() checks if the error in target voltage has increased
or decreased, and returns -EWOULDBLOCK if the error has not decreased
enough. The correct non-convergence condition is:
new_delta - delta > -rdev->constraints->max_uV_step
or equivalently:
delta - new_delta < rdev->constraints->max_uV_step
But the currently used condition is:
new_delta - delta > rdev->constraints->max_uV_step
Which may cause an infinite loop if the voltage error doesn't converge.
Fix this by correcting the convergence condition.
Suggested-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: d511206dc7 ("regulator: core: repeat voltage setting request for stepped regulators")
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://patch.msgid.link/20250729-b4-regulator-stepping-fix-v1-1-3f7b8c55d7d7@bootlin.com
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The regulator_set_voltage() function may exhibit unexpected behavior if the
target regulator has a maximum voltage step constraint. With such a
constraint, the regulator core may clamp the requested voltage to a lesser
value, to ensure that the voltage delta stays under the specified limit.
This means that the resulting regulator voltage depends on the current
voltage, as well as the requested range, which invalidates the assumption
that a repeated request for a specific voltage range will amount to a noop.
Considering the case of a regulator with a maximum voltage step constraint
of 1V:
initial voltage: 2.5V
consumer requests 4V
expected result: 3.5V
resulting voltage: 3.5V
consumer requests 4V again
expected result: 4V
actual result: 3.5V
Correct this by repeating attempts to balance the regulator voltage until
the result converges.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://patch.msgid.link/20250718-regulator-stepping-v2-1-e28c9ac5d54a@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The volatile_reg function is named as tps6287x_volatile_reg by mistake
when enabing the REGCACHE_MAPLE support.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250714010456.4906-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Luca Weiss <luca.weiss@fairphone.com>:
Document and add support for the regulators on PM7550 and PMR735B, which
can be paired with the Milos SoC.
Add RPMH regulators exposed by Qualcomm Technologies, Inc. PM7550 PMIC.
It has 6 FTS525 (FT-SMPS) and 23 LDOs with 3 different types.
L1-L11 are LDO515 LV NMOS, L12-L13 are LDO515 MV PMOS, L14-L23 are
LDO512 MV PMOS.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250711-pm7550-pmr735b-rpmh-regs-v2-4-bca8cc15c199@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add RPMH regulators exposed by Qualcomm Technologies, Inc. PMR735B PMIC.
It has 12 LDOs with 2 different types, L4 & L10 are LDO512 LV PMOS
and the rest are LDO512 NMOS.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250711-pm7550-pmr735b-rpmh-regs-v2-3-bca8cc15c199@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TI TPS652G1 is a stripped down version of the TPS65224 PMIC. It
doesn't feature the multiphase buck converter nor any voltage
monitoring. Due to the latter there are no interrupts serviced. In case
of the TPS652G1 any interrupt related setup is just skipped.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250703113153.2447110-9-mwalle@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using conditionals or tri state operators throughout the
.probe() provide a description per variant. This will make it much
easier to add new variants later.
While at it, make the variable naming more consistent.
This patch is only compile-time tested.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250703113153.2447110-8-mwalle@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 00c826525f ("regulator: tps6594-regulator: Add TI TPS65224 PMIC
regulators") added support for the TPS65224 and made the description of
the multi-phase buck converter variable depending on the variant of the
PMIC. But this was just done for MUTLI_BUCK12 and MULTI_BUCK12_34
configs probably because this variant only supports a multi-phase
configuration on buck 1 and 2. Remove the hardcoded value for the
remaining two configs, too as future PMIC variants might also support
these.
This is a preparation patch to refactor the regulator description and
is compile-time only tested.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250703113153.2447110-7-mwalle@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In .probe() interrupt_count and nr_types is essentially the same. It
contains the number of different interrupt per LDO or buck converter.
Drop one. This is a preparation patch to further simplify the handling
of different variants of this PMIC.
This patch is only compile-time tested.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250703113153.2447110-6-mwalle@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On some platforms, the sy8827n enable gpio may also be used for other
purpose, so make it NONEXCLUSIVE to support this case.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250629095716.841-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmhjrvQSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1aigIAKypscFSfd/WsAlP4orLtd4xiLi7KQHa
NrOYv7sZBVHgx4S9BGqHavYM3qhOBH5qCg+yBtqb8v6vp/TIlJjF2v3+C8uAXAnl
9GI5Gc6sZp/lMhf5Vb4Ibf58/P9lg4A7mIvM+LtfeEUMTlRrp47Q/RQ0ah7S4tDj
rFyC92QmBnkDLoyQp5IbCWkdjlqGgyTZzz/+XnfV9fWwX1aiXqaB4EZ2nXSAlyBx
awvA4/t662SWlHsdQqll9vS/+ZB39LEWwa1jJ7XGIK8t6GSH+TTys3S9/PHR/ua3
Dlcd+14plDGlSOy97hY+z6NdSgxH/qcpRgFduu5KwVqEwo2fqNkeV9Q=
=pFYw
-----END PGP SIGNATURE-----
Merge tag 'pm-runtime-6.17-rc1'
Runtime PM updates related to autosuspend for 6.17
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Merge series from Sakari Ailus <sakari.ailus@linux.intel.com>:
Late last year I posted a set to switch to __pm_runtime_mark_last_busy()
and gradually get rid of explicit pm_runtime_mark_last_busy() calls in
drivers, embedding them in the appropriate pm_runtime_*autosuspend*()
calls. The overall feedback I got at the time was that this is an
unnecessary intermediate step, and removing the
pm_runtime_mark_last_busy() calls can be done after adding them to the
relevant Runtime PM autosuspend related functions. The latter part has
been done and is present in Rafael's tree at the moment, also see
<URL:https://lore.kernel.org/linux-pm/CAJZ5v0g7-8UWp6ATOy+=oGdxDaCnfKHBG_+kbiTr+
+VeuXZsUFQ@mail.gmail.com/>:
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git \
pm-runtime-6.17-rc1
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20250704075444.3221445-1-sakari.ailus@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But
the memory is allocated for only one pointer. This will lead to
out-of-bounds access later in the code if 'config::ngpios' is > 1. So
fix the code to allocate enough memory to hold 'config::ngpios' of GPIO
descriptors.
While at it, also move the check for memory allocation failure to be below
the allocation to make it more readable.
Cc: stable@vger.kernel.org # 5.0
Fixes: d6cd33ad71 ("regulator: gpio: Convert to use descriptors")
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250703103549.16558-1-mani@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the driver_data of the i2c ID table is wrong, so it won't
work if any mp886x user makes use of the ID table. Fortunately, there's
no such user in upstream source code, we can fix the issue by using
different ID table entry for mp8867 and mp8869.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095918.912-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the driver_data of the i2c ID table is wrong, so it won't
work if any sy8824x user makes use of the ID table. Fortunately, there's
no such user in upstream source code, we can fix the issue by using
different ID table entry for sy8824c, sy8824e, sy20276 and sy20278.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095905.898-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable regmap cache to reduce i2c transactions and corresponding
interrupts if regulator is accessed frequently.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095107.804-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable regmap cache to reduce i2c transactions and corresponding
interrupts if regulator is accessed frequently.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095822.868-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable regmap cache to reduce i2c transactions and corresponding
interrupts if regulator is accessed frequently.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629094803.776-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In probe(), two arrays of structs are allocated with the devm_kmalloc()
function, but the memory size of the allocations were given as the arrays'
length (pmic->common_irq_size for the first call and pmic->dev_irq_size for
the second devm_kmalloc call). The memory size should have been the total
memory needed.
This led to a heap overflow when the struct array was used. The issue was
first discovered with the PocketBeagle2 and BeaglePlay. The common and
device-specific structs are now allocated one at a time within the loop.
Fixes: 38c9f98db2 ("regulator: tps65219: Add support for TPS65215 Regulator IRQs")
Reported-by: Dhruva Gole <d-gole@ti.com>
Closes: https://lore.kernel.org/all/20250619153526.297398-1-d-gole@ti.com/
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://patch.msgid.link/20250620154541.2713036-1-s-ramamoorthy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Failing to reset coupling_desc.n_coupled after freeing coupled_rdevs can
lead to NULL pointer dereference when regulators are accessed post-unbind.
This can happen during runtime PM or other regulator operations that rely
on coupling metadata.
For example, on ridesx4, unbinding the 'reg-dummy' platform device triggers
a panic in regulator_lock_recursive() due to stale coupling state.
Ensure n_coupled is set to 0 to prevent access to invalid pointers.
Signed-off-by: Alessandro Carminati <acarmina@redhat.com>
Link: https://patch.msgid.link/20250626083809.314842-1-acarmina@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series adds support for the DVFSRC regulators found on the MediaTek
MT8196 Chromebook SoC and the (unrelated) MT6893 Dimensity 1200.
The MediaTek Dimensity 1200 (MT6893) features the same DVFSRC
regulators as the other currently supported SoCs, but with a
different select value: add an array describing the possible
voltages for the VCORE and VSCP regulators, and assign it to
a new compatible for this SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250623120144.109359-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previous commit 548d770c33 ("regulator: pca9450: Add support for mode
operations") added support for setting forced PWM mode on the buck
regulators for pca9450a and pca9450bc parts. However part pca9451a also
supports this feature, thus add support for it.
Fixes: 548d770c33 ("regulator: pca9450: Add support for mode operations")
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Link: https://patch.msgid.link/20250618063339.2508893-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add shutdown hook so that the panel gets powered off with the system.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20250616154018.430004-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The datasheets for all the fan53555 variants (and clones using the same
interface) define so called soft start times, from enabling the regulator
until at least some percentage of the output (i.e. 92% for the rk860x
types) are available.
The regulator framework supports this with the enable_time property
but currently the fan53555 driver does not define enable_times for any
variant.
I ran into a problem with this while testing the new driver for the
Rockchip NPUs (rocket), which does runtime-pm including disabling and
enabling a rk8602 as needed. When reenabling the regulator while running
a load, fatal hangs could be observed while enabling the associated
power-domain, which the regulator supplies.
Experimentally setting the regulator to always-on, made the issue
disappear, leading to the missing delay to let power stabilize.
And as expected, setting the enable-time to a non-zero value
according to the datasheet also resolved the regulator-issue.
The datasheets in nearly all cases only specify "typical" values,
except for the fan53555 type 08. There both a typical and maximum
value are listed - 40uS apart.
For all typical values I've added 100uS to be on the safe side.
Individual details for the relevant regulators below:
- fan53526:
The datasheet for all variants lists a typical value of 150uS, so
make that 250uS with safety margin.
- fan53555:
types 08 and 18 (unsupported) are given a typical enable time of 135uS
but also a maximum of 175uS so use that value. All the other types only
have a typical time in the datasheet of 300uS, so give a bit margin by
setting it to 400uS.
- rk8600 + rk8602:
Datasheet reports a typical value of 260us, so use 360uS to be safe.
- syr82x + syr83x:
All datasheets report typical soft-start values of 300uS for these
regulators, so use 400uS.
- tcs452x:
Datasheet sadly does not report a soft-start time, so I've not set
an enable-time
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250606190418.478633-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing OF dependency and drop of_match_ptr() use.
This fixes the following LKP report:
"
>> drivers/regulator/rpi-panel-v2-regulator.c:95:34: warning: 'rpi_panel_v2_dt_ids' defined but not used [-Wunused-const-variable=]
static const struct of_device_id rpi_panel_v2_dt_ids[] = {
^~~~~~~~~~~~~~~~~~~
"
Fixes: d49305862f ("regulator: rpi-panel-v2: Add regulator for 7" Raspberry Pi 720x1280")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506100440.fyTGO7CG-lkp@intel.com/
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20250609223012.87764-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The BD718x7 needs to disable voltage monitoring for a duration of
certain voltage changes.
The comment explaining use of msleep(1) instead of a more accurate
delay(), was placed to a function which disabled the protection. The
actual sleeping is done in a different place of the code, after the
voltage has been changed.
Browsing through the comment and code after the years made me to scratch
my head for a second. I may have figured why me and so many fellow
developers are slowly getting bald.
Clarify things a bit and move the comment about required delay directly
above the sleep. Leave only a small comment explaining why the protection
is disabled to the spot where the logic for disabling is.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/a90cb77e66a253f4055bbb99672dc81c7457de66.1749533040.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing GPIOLIB dependency reported by the LKP test robot.
This fixes the following report:
"
kismet warnings: (new ones prefixed by >>)
>> kismet: WARNING: unmet direct dependencies detected for GPIO_REGMAP when selected by REGULATOR_RASPBERRYPI_TOUCHSCREEN_V2
WARNING: unmet direct dependencies detected for GPIO_REGMAP
Depends on [n]: GPIOLIB [=n]
Selected by [y]:
- REGULATOR_RASPBERRYPI_TOUCHSCREEN_V2 [=y] && REGULATOR [=y] && I2C [=y]
"
Fixes: d49305862f ("regulator: rpi-panel-v2: Add regulator for 7" Raspberry Pi 720x1280")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506092341.enbNKMOR-lkp@intel.com/
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20250609200242.31271-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add regulator for the 7" Raspberry Pi 720x1280 DSI panel based on ili9881.
This is the Raspberry Pi DSI Panel V2. The newer Raspberry Pi 5" and 7"
panels have a slightly different register map to the original one. Add a
new driver for this "regulator" chip, this time by exposing two GPIOs and
one PWM controller, both of which can be consumed by panel driver and
pwm-backlight respectively.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20250609000748.1665219-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the PWM mode on the buck controllers configurable from
devicetree. Some boards require forced PWM mode to keep the supply
ripple within acceptable limits under light load conditions.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Link: https://patch.msgid.link/20250525071823.819342-2-martijn.de.gouw@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no point in having 'npname' a static variable. So remove the
static qualifier. This is cleaner and saves a few bytes.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
27949 12176 64 40189 9cfd drivers/regulator/tps6594-regulator.o
After:
=====
text data bss dec hex filename
27947 12112 0 40059 9c7b drivers/regulator/tps6594-regulator.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/ebc53d4049ec19796ef07e1bb734de19a2814727.1748103005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct tps6594_regulator_irq_type' are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
25645 14480 64 40189 9cfd drivers/regulator/tps6594-regulator.o
After:
=====
text data bss dec hex filename
27949 12176 64 40189 9cfd drivers/regulator/tps6594-regulator.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/1446fb1938f3f38115be3e53f5dda3c8bb0ba5a1.1748103005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a missing call to of_node_put() if devm_kcalloc() fails.
Fix this by changing the code to use cleanup.h magic to drop the
refcount.
Fixes: 6b0cd72757 ("regulator: max20086: fix invalid memory access")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVRLqgJWMxYU03G@stanley.mountain
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A very minor fix that came in during the merge window, checking for I/O
errors in the MAX14577 driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhBmiMACgkQJNaLcl1U
h9A5sAf9F/hOszrNv4Css2Md5h2nYNg+GY/cWOK4wIaVBxXG0OSqJZMVoqyYn+tj
Wb9OJf11CSoC7OSfG/pgN6W61leWmZ97HCs6tAkkuCm9DdklHB7i5yz2oedliG7e
fx2a6FYsIzGMN5i/+57bQxmNjIiHgioK1A+s2pDru6TyHucTDdwUBPWIemnjoCEV
mpSdlmSxIhyoWapE+Ur4L5lHBATWKl98TjxO6lzIaqJmFe16jZpwZY8sXY0q9+qV
Lg+W+EAFs6pna6l0FY6lnriAlUSBJDMgTa0aM3cpvX9RwBnH9Z+V4ebjkSXJ8CJA
sXFWoQvdPGdt/Dxez5qnldpTioldGw==
=m+cK
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.16-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A very minor fix that came in during the merge window, checking for
I/O errors in the MAX14577 driver"
* tag 'regulator-fix-v6.16-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max14577: Add error check for max14577_read_reg()
* Samsung Exynos ACPM:
* Populate child platform devices from device tree data
* Introduce a new API, `devm_acpm_get_by_node()`, for child devices to get the ACPM handle
* ROHM PMICs:
* Add support for the ROHM BD96802 scalable companion PMIC to the BD96801 core driver
* Add support for controlling the BD96802 using the BD96801 regulator driver
* Add support to the BD96805, which is almost identical to the BD96801
* Add support to the BD96806, which is similar to the BD96802
* Maxim MAX77759:
* Add a core driver for the MAX77759 companion PMIC
* Add a GPIO driver for the expander functions on the MAX77759
* Add an NVMEM driver to expose the non-volatile memory on the MAX77759
* STMicroelectronics STM32MP25:
* Add support for the STM32MP25 SoC to the stm32-lptimer
* Add support for the STM32MP25 to the clocksource driver, handling new register access requirements
* Add support for the STM32MP25 to the PWM driver, enabling up to two PWM outputs
* Broadcom BCM590xx:
* Add support for the BCM59054 PMU
* Parse the PMU ID and revision to support behavioral differences between chip revisions
* Add regulator support for the BCM59054
* Samsung S2MPG10:
* Add support for the S2MPG10 PMIC, which communicates via the Samsung ACPM firmware instead of I2C
* Exynos ACPM:
* Improve timeout detection reliability by using ktime APIs instead of a loop counter assumption
* Allow PMIC access during late system shutdown by switching to `udelay()` instead of a sleeping function
* Fix an issue where reading command results longer than 8 bytes would fail
* Silence non-error `-EPROBE_DEFER` messages during boot to clean up logs
* Exynos LPASS:
* Fix an error handling path by switching to `devm_regmap_init_mmio()` to prevent resource leaks
* Fix a bug where `exynos_lpass_disable()` was called twice in the remove function
* Fix another resource leak in the probe's error path by using `devm_add_action_or_reset()`
* Samsung SEC:
* Handle the s2dos05, which does not have IRQ support, explicitly to prevent warnings
* Fix the core driver to correctly handle errors from `sec_irq_init()` instead of ignoring them
* STMPE-SPI:
* Correct an undeclared identifier in the `MODULE_DEVICE_TABLE` macro
* MAINTAINERS:
* Adjust a file path for the Siemens IPC LED drivers entry to fix a broken reference
* Maxim Drivers:
* Correct the spelling of "Electronics" in Samsung copyright headers across multiple files
* General:
* Fix wakeup source memory leaks on device unbind for 88pm886, as3722, max14577, max77541, max77705,
max8925, rt5033, and sprd-sc27xx drivers
* Samsung SEC Drivers:
* Split the driver into a transport-agnostic core (`sec-core`) and transport-specific (`sec-i2c`,
`sec-acpm`) modules to support non-I2C devices
* Merge the `sec-core` and `sec-irq` modules to reduce memory consumption
* Move internal APIs to a private header to clean up the public API
* Improve code style by sorting includes, cleaning up headers, sorting device tables, and using helper
macros like `dev_err_probe()`, `MFD_CELL`, and `REGMAP_IRQ_REG`
* Make regmap configuration for s2dos05/s2mpu05 explicit to improve clarity
* Rework platform data and regmap instantiation to use OF match data instead of a large switch statement
* ROHM BD96801/2:
* Prepare the driver for new models by separating chip-specific data into its own structure
* Drop IC name prefix from IRQ resource names in both the MFD and regulator drivers for simplification
* Broadcom BCM590xx:
* Refactor the regulator driver to store descriptions in a table to ease support for new chips
* Rename BCM59056-specific data to prepare for the addition of other regulators
* Use `dev_err_probe()` for cleaner error handling
* Exynos ACPM:
* Correct kerneldoc warnings and use the conventional 'np' argument name
* General MFD:
* Convert `aat2870` and `tps65010` to use the per-client debugfs directory provided by the I2C core
* Convert `sm501`, `tps65010` and `ucb1x00` to use the new GPIO line value setter callbacks
* Constify `regmap_irq_chip` and other structures in `88pm886` to move data to read-only sections
* BCM590xx:
* Drop the unused "id" member from the `bcm590xx` struct in preparation for a replacement
* Samsung SEC Core:
* Remove forward declarations for functions that no longer exist
* SM501:
* Remove the unused `sm501_find_clock()` function
* New Compatibles:
* Google: Add a PMIC child node to the `google,gs101-acpm-ipc` binding
* ROHM: Add new bindings for `rohm,bd96802-regulator` and `rohm,bd96802-pmic`, and add compatibles
for BD96805 and BD96806
* Maxim: Add new bindings for `maxim,max77759-gpio`, `maxim,max77759-nvmem`, and the top-level
`maxim,max77759`
* STM: Add `stm32mp25` compatible to the `stm32-lptimer` binding
* Broadcom: Add `bcm59054` compatible
* Atmel/Microchip: Add `microchip,sama7d65-gpbr` and `microchip,sama7d65-secumod` compatibles
* Samsung: Add `s2mpg10` compatible to the `samsung,s2mps11` MFD binding
* MediaTek: Add compatibles for `mt6893` (scpsys), `mt7988-topmisc`, and `mt8365-infracfg-nao`
* Qualcomm: Add `qcom,apq8064-mmss-sfpb` and `qcom,apq8064-sps-sic` syscon compatibles
* Refactoring & Cleanup:
* Convert Broadcom BCM59056 devicetree bindings to YAML and split them into MFD and regulator parts
* Convert the Microchip AT91 secumod binding to YAML
* Drop unrelated consumer nodes from binding examples to reduce bloat
* Correct indentation and style in various DTS examples
-----BEGIN PGP SIGNATURE-----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=hiAm
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Samsung Exynos ACPM:
- Populate child platform devices from device tree data
- Introduce a new API, 'devm_acpm_get_by_node()', for child devices
to get the ACPM handle
ROHM PMICs:
- Add support for the ROHM BD96802 scalable companion PMIC to the
BD96801 core driver
- Add support for controlling the BD96802 using the BD96801 regulator
driver
- Add support to the BD96805, which is almost identical to the
BD96801
- Add support to the BD96806, which is similar to the BD96802
Maxim MAX77759:
- Add a core driver for the MAX77759 companion PMIC
- Add a GPIO driver for the expander functions on the MAX77759
- Add an NVMEM driver to expose the non-volatile memory on the
MAX77759
STMicroelectronics STM32MP25:
- Add support for the STM32MP25 SoC to the stm32-lptimer
- Add support for the STM32MP25 to the clocksource driver, handling
new register access requirements
- Add support for the STM32MP25 to the PWM driver, enabling up to two
PWM outputs
Broadcom BCM590xx:
- Add support for the BCM59054 PMU
- Parse the PMU ID and revision to support behavioral differences
between chip revisions
- Add regulator support for the BCM59054
Samsung S2MPG10:
- Add support for the S2MPG10 PMIC, which communicates via the
Samsung ACPM firmware instead of I2C
Exynos ACPM:
- Improve timeout detection reliability by using ktime APIs instead
of a loop counter assumption
- Allow PMIC access during late system shutdown by switching to
'udelay()' instead of a sleeping function
- Fix an issue where reading command results longer than 8 bytes
would fail
- Silence non-error '-EPROBE_DEFER' messages during boot to clean up
logs
Exynos LPASS:
- Fix an error handling path by switching to
'devm_regmap_init_mmio()' to prevent resource leaks
- Fix a bug where 'exynos_lpass_disable()' was called twice in the
remove function
- Fix another resource leak in the probe's error path by using
'devm_add_action_or_reset()'
Samsung SEC:
- Handle the s2dos05, which does not have IRQ support, explicitly to
prevent warnings
- Fix the core driver to correctly handle errors from
'sec_irq_init()' instead of ignoring them
STMPE-SPI:
- Correct an undeclared identifier in the 'MODULE_DEVICE_TABLE' macro
MAINTAINERS:
- Adjust a file path for the Siemens IPC LED drivers entry to fix a
broken reference
Maxim Drivers:
- Correct the spelling of "Electronics" in Samsung copyright headers
across multiple files
General:
- Fix wakeup source memory leaks on device unbind for 88pm886,
as3722, max14577, max77541, max77705, max8925, rt5033, and
sprd-sc27xx drivers
Samsung SEC Drivers:
- Split the driver into a transport-agnostic core ('sec-core') and
transport-specific ('sec-i2c', 'sec-acpm') modules to support
non-I2C devices
- Merge the 'sec-core' and 'sec-irq' modules to reduce memory
consumption
- Move internal APIs to a private header to clean up the public API
- Improve code style by sorting includes, cleaning up headers,
sorting device tables, and using helper macros like
'dev_err_probe()', 'MFD_CELL', and 'REGMAP_IRQ_REG'
- Make regmap configuration for s2dos05/s2mpu05 explicit to improve
clarity
- Rework platform data and regmap instantiation to use OF match data
instead of a large switch statement
ROHM BD96801/2:
- Prepare the driver for new models by separating chip-specific data
into its own structure
- Drop IC name prefix from IRQ resource names in both the MFD and
regulator drivers for simplification
Broadcom BCM590xx:
- Refactor the regulator driver to store descriptions in a table to
ease support for new chips
- Rename BCM59056-specific data to prepare for the addition of other
regulators
- Use 'dev_err_probe()' for cleaner error handling
Exynos ACPM:
- Correct kerneldoc warnings and use the conventional 'np' argument
name
General MFD:
- Convert 'aat2870' and 'tps65010' to use the per-client debugfs
directory provided by the I2C core
- Convert 'sm501', 'tps65010' and 'ucb1x00' to use the new GPIO line
value setter callbacks
- Constify 'regmap_irq_chip' and other structures in '88pm886' to
move data to read-only sections
BCM590xx:
- Drop the unused "id" member from the 'bcm590xx' struct in
preparation for a replacement
Samsung SEC Core:
- Remove forward declarations for functions that no longer exist
SM501:
- Remove the unused 'sm501_find_clock()' function
New Compatibles:
- Google: Add a PMIC child node to the 'google,gs101-acpm-ipc'
binding
- ROHM: Add new bindings for 'rohm,bd96802-regulator' and
'rohm,bd96802-pmic', and add compatibles for BD96805 and BD96806
- Maxim: Add new bindings for 'maxim,max77759-gpio',
'maxim,max77759-nvmem', and the top-level 'maxim,max77759'
- STM: Add 'stm32mp25' compatible to the 'stm32-lptimer' binding
- Broadcom: Add 'bcm59054' compatible
- Atmel/Microchip: Add 'microchip,sama7d65-gpbr' and
'microchip,sama7d65-secumod' compatibles
- Samsung: Add 's2mpg10' compatible to the 'samsung,s2mps11' MFD
binding
- MediaTek: Add compatibles for 'mt6893' (scpsys), 'mt7988-topmisc',
and 'mt8365-infracfg-nao'
- Qualcomm: Add 'qcom,apq8064-mmss-sfpb' and 'qcom,apq8064-sps-sic'
syscon compatibles
Refactoring & Cleanup:
- Convert Broadcom BCM59056 devicetree bindings to YAML and split
them into MFD and regulator parts
- Convert the Microchip AT91 secumod binding to YAML
- Drop unrelated consumer nodes from binding examples to reduce bloat
- Correct indentation and style in various DTS examples"
* tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (81 commits)
mfd: maxim: Correct Samsung "Electronics" spelling in copyright headers
mfd: maxim: Correct Samsung "Electronics" spelling in headers
mfd: sm501: Remove unused sm501_find_clock
mfd: 88pm886: Constify struct regmap_irq_chip and some other structures
dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao
mfd: sprd-sc27xx: Fix wakeup source leaks on device unbind
mfd: rt5033: Fix wakeup source leaks on device unbind
mfd: max8925: Fix wakeup source leaks on device unbind
mfd: max77705: Fix wakeup source leaks on device unbind
mfd: max77541: Fix wakeup source leaks on device unbind
mfd: max14577: Fix wakeup source leaks on device unbind
mfd: as3722: Fix wakeup source leaks on device unbind
mfd: 88pm886: Fix wakeup source leaks on device unbind
dt-bindings: mfd: Correct indentation and style in DTS example
dt-bindings: mfd: Drop unrelated nodes from DTS example
dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic
dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb
mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE
dt-bindings: mfd: syscon: Add mt7988-topmisc
mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe()
...
This is a very quiet release, there was no work on the core and a good
chunk of the updates were the result of conversions to use newer GPIO
APIs. We did gain support for Analog ADP5055 and TI TPS65214 devices,
and there's a new restart handler for the PCA9450 which allows devices
using it to be properly power cycled on reboot, but otherwise it's minor
fixes and API updates.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgzBksACgkQJNaLcl1U
h9DfSQf+KAyyETqQ504yew2Yin0jdPsHrlrPw9OmK/4gwk9DNvzAELGBqolQWaEV
vDaLniVbqDoFDZECDKfKHPkw1GRjo8CUd1JaMcEv+cUHvdO7cyRR/44Kguuc78Q7
nkaBrgyYA9iK+3hH3t7aK4oKHcLzAcdrFHgAIm5P0mld0pr1UrQmYlsQpvEEAhEb
TpxT+9V04DjPbpyNC4k0GCvJS1EXaS2X3kjKnowTSylCdxxGC7HbQK1QX0OSEvWV
5wJz+46bmcjAggf4PM8DlFtLCmLdMlb2+g0iNfikwvvBVBe0fhDW657apSTq18XS
+K9bnCEupseehFA/r+gjh1EFjFWPLQ==
=QoGH
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a very quiet release, there was no work on the core and a good
chunk of the updates were the result of conversions to use newer GPIO
APIs.
We did gain support for Analog ADP5055 and TI TPS65214 devices, and
there's a new restart handler for the PCA9450 which allows devices
using it to be properly power cycled on reboot, but otherwise it's
minor fixes and API updates"
* tag 'regulator-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: qcom_spmi: Constify struct spmi_voltage_range
regulator: max8952: Correct Samsung "Electronics" spelling in copyright headers
regulator: dt-bindings: mt6357: Drop fixed compatible requirement
regulator: gpio: Use dev_err_probe
regulator: pca9450: Add restart handler
regulator: da9121: Fix Wvoid-pointer-to-enum-cast warning
regulator: tps65219: Add TI TPS65214 Regulator Support
regulator: tps65219: Add support for TPS65215 Regulator IRQs
regulator: tps65219: Add support for TPS65215 regulator resources
regulator: tps65219: Update struct names
regulator: pf9453: convert to use maple tree register cache
regulator: max20086: Change enable gpio to optional
regulator: max20086: Fix MAX200086 chip id
regulator: adp5055: Remove unneeded semicolon
regulator: adp5055: remove duplicate device table
regulator: adp5055: Add driver for adp5055
regulator: dt-bindings: adi,adp5055-regulator: Add adp5055 support
regulator: don't compare raw GPIO descriptor pointers
regulator: rpi-panel-attiny: use new GPIO line value setter callbacks
regulator: rpi-panel-attiny: use lock guards for the state mutex
...
The function max14577_reg_get_current_limit() calls the function
max14577_read_reg(), but does not check its return value. A proper
implementation can be found in max14577_get_online().
Add a error check for the max14577_read_reg() and return error code
if the function fails.
Fixes: b0902bbeb7 ("regulator: max14577: Add regulator driver for Maxim 14577")
Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250526025627.407-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The BCM59056 and BCM59054 are very similar in terms of regulators. Add
the register definitions for the BCM59054 and enable support for it in
the driver.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Mark Brown <brooni@kernel.org>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-8-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Previously, the driver used the BCM590XX prefix for register data
specific to the BCM59056. As we will be introducing other regulators
to this driver as well, make the BCM59056-specific values use the
BCM59056 prefix.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-7-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Instead of filling in the regulator description programatically,
store the data in a struct. This will make it a bit nicer to
introduce support for other BCM590xx chips besides the BCM59056.
To do this, add a new struct type, bcm590xx_reg_data, to store
all of the necessary information. Drop the old IS_LDO, IS_GPLDO...
macros in favor of the "type" field in this struct. Adapt the
old bcm590xx_reg struct to the new types.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-6-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Instead of calling dev_err() and returning PTR_ERR(...) separately, use
a single "return dev_err_probe" statement.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-5-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
'struct spmi_voltage_range' are only modified at runtime to compile a
field, n_voltages, that could be computed at compile time.
So, simplify spmi_calculate_num_voltages() and compute n_voltages at
compile time within the SPMI_VOLTAGE_RANGE macro.
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
85437 26776 512 112725 1b855 drivers/regulator/qcom_spmi-regulator.o
After:
=====
text data bss dec hex filename
86857 24760 512 112129 1b601 drivers/regulator/qcom_spmi-regulator.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/ef2a4b6df61e19470ddf6cbd1f3ca1ce88a3c1a0.1747570556.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
max20086_parse_regulators_dt() calls of_regulator_match() using an
array of struct of_regulator_match allocated on the stack for the
matches argument.
of_regulator_match() calls devm_of_regulator_put_matches(), which calls
devres_alloc() to allocate a struct devm_of_regulator_matches which will
be de-allocated using devm_of_regulator_put_matches().
struct devm_of_regulator_matches is populated with the stack allocated
matches array.
If the device fails to probe, devm_of_regulator_put_matches() will be
called and will try to call of_node_put() on that stack pointer,
generating the following dmesg entries:
max20086 6-0028: Failed to read DEVICE_ID reg: -121
kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet
kobject_put() is being called.
Followed by a stack trace matching the call flow described above.
Switch to allocating the matches array using devm_kcalloc() to
avoid accessing the stack pointer long after it's out of scope.
This also has the advantage of allowing multiple max20086 to probe
without overriding the data stored inside the global of_regulator_match.
Fixes: bfff546aae ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Link: https://patch.msgid.link/20250508064947.2567255-1-demonsingur@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During probe the gpio driver may not yet be available. Use
dev_err_probe to provide just the pertinent log.
Since dev_err_probe takes care of reporting the error value,
drop the redundant ret variable while at it.
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://patch.msgid.link/20250512185727.2907411-1-nm@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When restarting a CPU powered by the PCA9450 power management IC, it
is beneficial to use the PCA9450 to power cycle the CPU and all its
connected peripherals to start up in a known state. The PCA9450 features
a cold start procedure initiated by an I2C command.
Add a restart handler so that the PCA9450 is used to restart the CPU.
The restart handler sends command 0x14 to the SW_RST register,
initiating a cold reset (Power recycle all regulators except LDO1, LDO2
and CLK_32K_OUT)
As the PCA9450 is a PMIC specific for the i.MX8M family CPU, the restart
handler priority is set just slightly higher than imx2_wdt and the PSCI
restart handler. This makes sure this restart handler takes precedence.
Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Link: https://patch.msgid.link/20250505115936.1946891-1-paul.geurts@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'subvariant_id' is an enum, thus cast of pointer on 64-bit compile test
with clang and W=1 causes:
da9121-regulator.c:1132:24: error: cast to smaller integer type 'enum da9121_subvariant' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250509142448.257199-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for TPS65214 regulators (bucks and LDOs) to the TPS65219
Regulator Driver as the TPS65214/TPS65214/TPS65219 PMIC devices have
significant register map overlap. TPS65214 is a Power Management IC with 3
Buck regulators (like TPS65215/TPS65219) and has 2 LDOs (like TPS65215).
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://patch.msgid.link/20250425205736.76433-5-s-ramamoorthy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Isolate all changes involving regulator IRQ types:
- Adding in TPS65215 resources
- Organize what resources are common vs device-specific
- How the chip_data uses these resource structs
- Restructure the probe() for multi-PMIC support.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://patch.msgid.link/20250425205736.76433-4-s-ramamoorthy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Isolate all changes involving TPS65215 regulator desc and range resources.
- 'chipid' will identify which PMIC to support, and the corresponding
chip_data struct element to use in probe(). The chip_data struct is
helpful for any new PMICs added to this driver. The goal is to add future
PMIC info to necessary structs and minimize probe() function edits.
- The probe() will now loop through common (overlapping) regulators first,
then device-specific structs identified in the chip_data struct.
- Add TI TPS65215 PMIC to the existing platform_device_id struct, so the
regulator probe() can handle which PMIC chip_data information to use.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://patch.msgid.link/20250425205736.76433-3-s-ramamoorthy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Isolate changes that involve renaming to indicate this resource is only for
TPS65219 or if it will be common for both devices. The renames are in
preparation for adding TPS65215 support.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://patch.msgid.link/20250425205736.76433-2-s-ramamoorthy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ROHM BD96806 is from the software perspective almost identical to
the ROHM BD96802. The main difference is different voltage tuning
ranges.
Add support differentiating these PMICs and provide correct voltages
for both models.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/5d15660e0e71c70fda8df1694bec0e4fba7f251e.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96805 is from the software perspective almost identical to
the ROHM BD96801. The main difference is different voltage tuning
ranges.
Add support differentiating these PMICs and provide correct voltages
for both models.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/eab1369557b14a9762c41a5429d1ac87a4644d9e.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96802 PMIC is primarily intended to be used as a companion
PMIC extending the capabilities of the BD96802 but it can be used on
it's own as well. When used as a companion PMIC, the start-up and
shut-down sequences are usually intitiated by the master PMIC using IF
pins.
The BD96802 looks from the digital interface point of view pretty much
like a reduced version of BD96801. It includes only 2 BUCKs and provides
the same error protection/detection mechanisms as the BD96801. Also, the
voltage control logic is same up to the register addresses.
Add support for controlling BD96802 using the BD96801 driver.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/2fb2d0d4997c32d18bfa32cea4564352c00eebc8.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The resources generated in the BD96801 MFD driver are only visible to
the sub-drivers whose resource fields they are added. This makes
abbreviating the resource name with the IC name pointless. It just adds
confusion in those sub-drivers which do not really care the exact model
that generates the IRQ but just want to know the purpose IRQ was
generated for. Thus, as a preparatory fix to simplify adding support for
ROHM BD96802 PMIC the IC name "bd96801-" prefix was dropped from the IRQ
resource names. Adapt the regulator driver to this change.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/73ec2425655ab19c9f0cf990419641ad36561590.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://patch.msgid.link/20250424010855.2662-1-liubo03@inspur.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>:
I'm working on integrating a system with a MAX20086 and noticed these
small issues in the driver: the chip ID for MAX20086 is 0x30 and not
0x40. Also, in my use case, the enable pin is always enabled by
hardware, so the enable GPIO isn't needed. Without these changes, the
driver fails to probe.
The enable pin can be configured as always enabled by the hardware. Make
the enable gpio request optional so the driver doesn't fail to probe
when `enable-gpios` property is not present in the device tree.
Cc: stable@vger.kernel.org
Fixes: bfff546aae ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20250420-fix-max20086-v1-2-8cc9ee0d5a08@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
>From MAX20086-MAX20089 datasheet, the id for a MAX20086 is 0x30 and not
0x40. With the current code, the driver will fail on probe when the
driver tries to identify the chip id from a MAX20086 device over I2C.
Cc: stable@vger.kernel.org
Fixes: bfff546aae ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20250420-fix-max20086-v1-1-8cc9ee0d5a08@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250414021950.3755819-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
When building with -Wunused-const-variable, gcc points out an
device table that is not referenced anywhere:
drivers/regulator/adp5055-regulator.c:346:34: error: unused variable 'adp5055_dt_ids' [-Werror,-Wunused-const-variable]
346 | static const struct of_device_id adp5055_dt_ids[] = {
| ^~~~~~~~~~~~~~
The contents are the same as the second table in that file, so
just remove this copy.
Fixes: 147b2a96f2 ("regulator: adp5055: Add driver for adp5055")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250410141006.866813-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Alexis Czezar Torreno <alexisczezar.torreno@analog.com>:
Introduce a regulator driver support for ADP5055. The device combines 3
high performance buck regulators in a 43-termminal land grid array
package. The device enables direct connection to high input voltages up
to 18V with no preregulator. Channel 1 and 2 deliver a programmable
output current of 3.5A or 7.5A or provide a single output with up to 14A
in parallel operation. Channel 3 has a programmable output current of
1.5A or 3A.
Merge series from Bartosz Golaszewski <brgl@bgdev.pl>:
Handling of shared GPIOs in the kernel needs some improvements. Let's
start with a simple change of not comparing GPIO descriptor pointers
directly as there's nothing that guarantees that the same physical pin
will always be represented by a single GPIO descriptor obtained by
calling gpiod_get().
Add ADI ADP5055 driver support. The device consists
of 3 buck regulators able to connect to high input voltages of up to 18V
with no preregulators.
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://patch.msgid.link/20250409-upstream-adp5055-v6-2-faa6e810deb1@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no API contract saying that two GPIO descriptor pointers
obtained with a call to gpiod_get() (or one of the variants), that refer
to the same physical GPIO pin, always point to the same structure. Use
the dedicated comparator function.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250407-gpiod-is-equal-v1-2-7d85f568ae6e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bartosz Golaszewski <brgl@bgdev.pl>:
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. We're in the process of
converting all GPIO drivers to using the new API. This series converts
the only GPIO controller under drivers/regulator/ and - while at it -
refactors the code a bit.
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250408-gpiochip-set-rv-regulator-v1-4-a18b6154b31a@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use mutex lock guards from linux/cleanup.h to simplify the driver code.
Note that ret must be initialized in order to avoid a build warning as
scoped_guard() is implemented as a for loop.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250408-gpiochip-set-rv-regulator-v1-3-a18b6154b31a@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from From git@z Thu Jan 1 00:00:00 1970
Peng Fan <peng.fan@nxp.com>:
Update the driver to fetch buck_gpio and buck_ds as GPIO descriptors.
Then drop the usage of 'of_gpio.h' which should be deprecated.
Based on commit 84618d5e31 ("regulator: max8997:
Convert to GPIO descriptors") as a reference to make the changes.
With the quirk fix for s5m8767 in of_gpio_try_fixup_polarity,
the polarity will be active-high, even if exynos5250 spring DTS
wrongly use active-low polarity. So using GPIO descriptors,
it should work as before.
The function pf9453_regulator_set_ramp_delay_regmap lacked detailed
parameter descriptions and return value explanations in its documentation.
This patch improves the documentation by adding specific details about
the parameters, their usage, and the return values, enhancing clarity for
developers.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=20168
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://patch.msgid.link/20250407064532.22680-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the driver to fetch buck_gpio and buck_ds as GPIO descriptors.
Then drop the usage of 'of_gpio.h' which should be deprecated.
Based on commit 84618d5e31 ("regulator: max8997:
Convert to GPIO descriptors") as a reference to make the changes.
With the quirk fix for s5m8767 in of_gpio_try_fixup_polarity,
the polarity will be active-high, even if exynos5250 spring DTS
wrongly use active-low polarity. So using GPIO descriptors,
it should work as before.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250327004945.563765-2-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
around the fallout from the new CONFIG_OBJTOOL_WERROR=y feature,
which, despite its default-off nature, increased the profile/impact
of objtool warnings:
- Improve error handling and the presentation of warnings/errors.
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions.
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations.
- Update objtool to latest (known) compiler quirks and
objtool bugs triggered by compiler code generation
- Misc fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KkiI
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform bus
interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mNdQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylktACfYJix41jCCDbiFjnu7Hz4OIdcrUsAnRyF164M
1n5MhEhsEmvQj7WBwQLE
=AmmW
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
reservation" from Sourabh Jain changes powerpc's kexec code to use more
of the generic layers.
- The 2 patch series "get_maintainer: report subsystem status
separately" from Vlastimil Babka makes some long-requested improvements
to the get_maintainer output.
- The 4 patch series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the ucount
code.
- The 12 patch series "reboot: support runtime configuration of
emergency hw_protection action" from Ahmad Fatoum improves the ability
for a driver to perform an emergency system shutdown or reboot.
- The 16 patch series "Converge on using secs_to_jiffies() part two"
from Easwar Hariharan performs further migrations from
msecs_to_jiffies() to secs_to_jiffies().
- The 7 patch series "lib/interval_tree: add some test cases and
cleanup" from Wei Yang permits more userspace testing of kernel library
code, adds some more tests and performs some cleanups.
- The 2 patch series "hung_task: Dump the blocking task stacktrace" from
Masami Hiramatsu arranges for the hung_task detector to dump the stack
of the blocking task and not just that of the blocked task.
- The 4 patch series "resource: Split and use DEFINE_RES*() macros" from
Andy Shevchenko provides some cleanups to the resource definition
macros.
- Plus the usual shower of singleton patches - please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA
jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq
r6khQUIcQImPPcjFqEFpuiSOU0MBZA0=
=Kii8
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
* Added core MFD driver.
* Added charger driver.
* Added devicetree bindings for the charger and MFD core.
* Added Haptic controller support via the input subsystem.
* Added LED support.
* Added support to simple-mfd-i2c for fuel gauge and hwmon.
* Samsung S2MPU05 (Exynos7870 PMIC):
* Added core MFD support.
* Added Regulator support for 21 LDOs and 5 BUCKs.
* Added devicetree bindings for regulators and the PMIC core.
* TI TPS65215 & TPS65214:
* Added support to the existing TPS65219 driver.
* Added devicetree bindings.
* STMicroelectronics STM32MP25:
* Added support to the stm32-timers MFD driver.
* Added devicetree bindings.
* Congatec Board Controller (CGBC):
* Added HWMON support for internal sensors.
* Added support for the conga-SA8 module.
* Microchip LAN969X:
* Enabled the at91-usart MFD driver for this architecture.
* MediaTek MT6359:
* Added mfd_cell for mt6359-accdet to allow its driver to probe.
* AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable
regs for temperature sensor configuration.
* SM501: Switched to using BIT() macro to mitigate potential
integer overflows in GPIO functions.
* ENE KB3930: Added a NULL pointer check for off_gpios during
probe to prevent potential dereference.
* SYSCON: Added a check for invalid resource size to prevent
issues from DT misconfiguration.
* CGBC: Corrected signedness issues in cgbc_session_request.
* intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
* ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
* upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
* max8997: Removed unused max8997_irq_exit() function, using
devm_* helpers instead.
* lp3943: Dropped unused #include <linux/pwm.h> from the header
file.
* db8500-prcmu: Removed needless return statements in void APIs.
* qnap-mcu: Replaced commas with semicolons between expressions
for correctness.
* STA2X11: Removed the core MFD driver as the underlying
platform support was removed.
* EZX-PCAP: Removed the unused pcap_adc_sync function.
* PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
* Converted fsl,mcu-mpc8349emitx binding to YAML.
* Added qcom,msm8937-tcsr compatible.
* Added microchip,sama7d65-flexcom compatible.
* Added rockchip,rk3528-qos syscon compatible.
* Added airoha,en7581-pbus-csr syscon compatible.
* Added microchip,sama7d65-ddr3phy syscon compatible.
* Added microchip,sama7d65-sfrbu syscon compatible.
-----BEGIN PGP SIGNATURE-----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=ntF1
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Maxim MAX77705:
- Added core MFD driver.
- Added charger driver.
- Added devicetree bindings for the charger and MFD core.
- Added Haptic controller support via the input subsystem.
- Added LED support.
- Added support to simple-mfd-i2c for fuel gauge and hwmon.
Samsung S2MPU05 (Exynos7870 PMIC):
- Added core MFD support.
- Added Regulator support for 21 LDOs and 5 BUCKs.
- Added devicetree bindings for regulators and the PMIC core.
TI TPS65215 & TPS65214:
- Added support to the existing TPS65219 driver.
- Added devicetree bindings.
STMicroelectronics STM32MP25:
- Added support to the stm32-timers MFD driver.
- Added devicetree bindings.
Congatec Board Controller (CGBC):
- Added HWMON support for internal sensors.
- Added support for the conga-SA8 module.
Microchip LAN969X:
- Enabled the at91-usart MFD driver for this architecture.
MediaTek MT6359:
- Added mfd_cell for mt6359-accdet to allow its driver to probe.
Other misc driver updates:
- AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
for temperature sensor configuration.
- SM501: Switched to using BIT() macro to mitigate potential integer
overflows in GPIO functions.
- ENE KB3930: Added a NULL pointer check for off_gpios during probe
to prevent potential dereference.
- SYSCON: Added a check for invalid resource size to prevent issues
from DT misconfiguration.
- CGBC: Corrected signedness issues in cgbc_session_request
- intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
- ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
- upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
- max8997: Removed unused max8997_irq_exit() function, using devm_*
helpers instead.
- lp3943: Dropped unused #include <linux/pwm.h> from the header file.
- db8500-prcmu: Removed needless return statements in void APIs.
- qnap-mcu: Replaced commas with semicolons between expressions for
correctness.
- STA2X11: Removed the core MFD driver as the underlying platform
support was removed.
- EZX-PCAP: Removed the unused pcap_adc_sync function.
- PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
Devicetree updates:
- Converted fsl,mcu-mpc8349emitx binding to YAML
- Added qcom,msm8937-tcsr compatible
- Added microchip,sama7d65-flexcom compatible
- Added rockchip,rk3528-qos syscon compatible
- Added airoha,en7581-pbus-csr syscon compatible
- Added microchip,sama7d65-ddr3phy syscon compatible
- Added microchip,sama7d65-sfrbu syscon compatible"
* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: cgbc-core: Add support for conga-SA8
dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
mfd: cgbc: Add support for HWMON
dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
mfd: pcf50633: Remove remaining PCF50633 support
mfd: pcf50633: Remove unused platform IRQ code
mfd: pcF50633-gpio: Remove unused driver
mfd: pcf50633-adc: Remove unused driver
mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
mfd: mt6397-core: Add mfd_cell for mt6359-accdet
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
mfd: ezx-pcap: Remove unused pcap_adc_sync
mfd: db8500-prcmu: Remove needless return in three void APIs
mfd: Remove STA2x11 core driver
mfd: max77620: Allow building as a module
mfd: ene-kb3930: Fix a potential NULL pointer dereference
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
...
This has been a very quiet release, we've got support for one device
added, another removed, and some smaller fixes and API improvements.
The main thing of note is the rework of the PCA9450 LDO5 handling:
- A rework of the handling of LDO5 on the PCA9450, this was quite wrong
in how it handled the SD_VSEL conrol and only worked for some system
designs. This includes a DTS update since there was a not quite ABI
compatible change as part of the fix.
- A devres change introducing devm_kmemdup_array() was pulled in so it
could be used with some regulator conversions to that function, this
pulled in some other devres and IIO stuff that was part of the same pull
request.
- Removal of the PCF50633 driver, the SoC for the OpenMoko platform
that used it has been removed.
- Support for the NXP PF9453.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmfhaNUACgkQJNaLcl1U
h9C3lAf8C6tohTvyzPWCcqQN5RnoZSw1SNN9jloEL1xcMKEtRosTaqIYRDKhuKUL
Drumh8C1B9Kx2wrsvE+j1eX4gXCaPK9P7EZbH3h3WFXkFkov6MNsH+UmhOAVm3AT
U/JmYs6/iGng/OptlYsguahwgwyj2eLb8E5RzSg7KgKbNW47M7QcqpkarQpRB+Si
Fz5528UQwDPwD04R4SEIn85I1xnJWdFVyOdfQA32Ugh7l8Vhgf+Z7G1aH4/5hOz8
cYJKoZscgOIkJw4lsKbS/+dCo2haYJqKCcT68P8qGf8zr9yeLPzkLYqNf+NaW/wP
uhoJKDm0nqo/rC9T1810YQfbPrfg6w==
=oFD5
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very quiet release, we've got support for one device
added, another removed, and some smaller fixes and API improvements.
The main thing of note is the rework of the PCA9450 LDO5 handling.
- A rework of the handling of LDO5 on the PCA9450, this was quite
wrong in how it handled the SD_VSEL conrol and only worked for some
system designs. This includes a DTS update since there was a not
quite ABI compatible change as part of the fix
- A devres change introducing devm_kmemdup_array() was pulled in so
it could be used with some regulator conversions to that function,
this pulled in some other devres and IIO stuff that was part of the
same pull request
- Removal of the PCF50633 driver, the SoC for the OpenMoko platform
that used it has been removed
- Support for the NXP PF9453"
* tag 'regulator-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: axp20x: AXP717: dcdc4 doesn't have delay
regulator: dt-bindings: rtq2208: Cleanup whitespace
regulator: dt-bindings: rtq2208: Mark fixed LDO VOUT property as deprecated
regulator: rtq6752: make const read-only array fault_mask static
regulator: pf9453: add PMIC PF9453 support
regulator: dt-bindings: pca9450: Add nxp,pf9453 compatible string
regulator: pcf50633-regulator: Remove
regulator: pca9450: Handle hardware with fixed SD_VSEL for LDO5
regulator: cros-ec: use devm_kmemdup_array()
regulator: devres: use devm_kmemdup_array()
regulator: Add (devm_)of_regulator_get()
devres: Introduce devm_kmemdup_array()
iio: imu: st_lsm9ds0: Replace device.h with what is needed
driver core: Split devres APIs to device/devres.h
err.h: move IOMEM_ERR_PTR() to err.h
regulator: pca9450: Remove duplicate code in probe
regulator: ad5398: Fix incorrect power down bit mask
regulator: pca9450: Fix enable register for LDO5
regulator: pca9450: Fix control register for LDO5
Revert "regulator: pca9450: Add SD_VSEL GPIO for LDO5"
...
If 'ctr_bit' is negative, the shift counts become negative, causing a
shift of bounds and undefined behavior.
Presumably that's not possible in normal operation, but the code
generation isn't optimal. And undefined behavior should be avoided
regardless.
Improve code generation and remove the undefined behavior by converting
the signed variables to unsigned.
Fixes the following warning with an UBSAN kernel:
vmlinux.o: warning: objtool: rk806_set_mode_dcdc() falls through to next function rk806_get_mode_dcdc()
vmlinux.o: warning: objtool: .text.rk806_set_mode_dcdc: unexpected end of section
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/2023abcddf3f524ba478d64339996f25dc4097d2.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503182350.52KeHGD4-lkp@intel.com/
According to AXP717 user manual, DCDC4 doesn't have a ramp delay like
DCDC1/2/3 do.
Remove it from the description and cleanup the macros.
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250318205147.42850-1-simons.philippe@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the hidden bank register to identify whether the LDO voltage is
fixed or variable. Remove the read of 'richtek,fixed-microvolt'
property.
Fixes: af1296d15d ("regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/dae0321b710518ce32260336e3cc9caf2ba84215.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the core detects permanent regulator hardware failure or imminent
power failure of a critical supply, it will call hw_protection_shutdown in
an attempt to do a limited orderly shutdown followed by powering off the
system.
This doesn't work out well for many unattended embedded systems that don't
have support for shutdown and that power on automatically when power is
supplied:
- A brief power cycle gets detected by the driver
- The kernel powers down the system and SoC goes into shutdown mode
- Power is restored
- The system remains oblivious to the restored power
- System needs to be manually power cycled for a duration long enough
to drain the capacitors
Allow users to fix this by calling the newly introduced
hw_protection_trigger() instead: This way the hw_protection commandline or
sysfs parameter is used to dictate the policy of dealing with the
regulator fault.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-8-e1c09b090c0c@pengutronix.de
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Support new PMIC PF9453, which is totally difference with PCA9450. So
create new file for it.
The PF9453 is a single chip Power Management IC (PMIC) specifically
designed for i.MX 91 processor. It provides power supply solutions for IoT
(Internet of Things), smart appliance, and portable applications where size
and efficiency are critical. The device provides four high efficiency
step-down regulators, three LDOs, one 400 mA load switch and 32.768 kHz
crystal oscillator driver.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250314-pf9453-v5-2-ab0cf1f871b0@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dummy regulator driver does not need to create a platform device, it
only did so because it was simple to do. Change it over to use the
faux bus instead as this is NOT a real platform device, and it makes
the code even smaller than before.
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/2025021027-outclass-stress-59dd@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
S2MPU05 is a PMIC by manufactured by Samsung, particularly used in
Exynos7870 based devices. Add driver support for controlling its 21 LDO
and 5 BUCK regulators.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-pmic-regulators-v3-3-808d0b47a564@disroot.org
Signed-off-by: Lee Jones <lee@kernel.org>
Sometimes I get a NULL pointer dereference at boot time in kobject_get()
with the following call stack:
anatop_regulator_probe()
devm_regulator_register()
regulator_register()
regulator_resolve_supply()
kobject_get()
By placing some extra BUG_ON() statements I could verify that this is
raised because probing of the 'dummy' regulator driver is not completed
('dummy_regulator_rdev' is still NULL).
In the JTAG debugger I can see that dummy_regulator_probe() and
anatop_regulator_probe() can be run by different kernel threads
(kworker/u4:*). I haven't further investigated whether this can be
changed or if there are other possibilities to force synchronization
between these two probe routines. On the other hand I don't expect much
boot time penalty by probing the 'dummy' regulator synchronously.
Cc: stable@vger.kernel.org
Fixes: 259b93b21a ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://patch.msgid.link/20250311091803.31026-1-ceggers@arri.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we are unnecessarily holding a regulator_ww_class_mutex lock
when creating debugfs entries for a newly created regulator. This was
brought up as a concern in the discussion in commit cba6cfdc7c
("regulator: core: Avoid lockdep reports when resolving supplies").
This causes the following lockdep splat after executing
`ls /sys/kernel/debug` on my platform:
======================================================
WARNING: possible circular locking dependency detected
5.15.167-axis9-devel #1 Tainted: G O
------------------------------------------------------
ls/2146 is trying to acquire lock:
ffffff803a562918 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x40/0x88
but task is already holding lock:
ffffff80014497f8 (&sb->s_type->i_mutex_key#3){++++}-{3:3}, at: iterate_dir+0x50/0x1f4
which lock already depends on the new lock.
[...]
Chain exists of:
&mm->mmap_lock --> regulator_ww_class_mutex --> &sb->s_type->i_mutex_key#3
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sb->s_type->i_mutex_key#3);
lock(regulator_ww_class_mutex);
lock(&sb->s_type->i_mutex_key#3);
lock(&mm->mmap_lock);
*** DEADLOCK ***
This lock dependency still exists on the latest kernel and using a newer
non-tainted kernel would still cause this problem.
Fix by moving sysfs symlinking and creation of debugfs entries to after
the release of the regulator lock.
Fixes: cba6cfdc7c ("regulator: core: Avoid lockdep reports when resolving supplies")
Fixes: eaa7995c52 ("regulator: core: avoid regulator_resolve_supply() race condition")
Signed-off-by: Ludvig Pärsson <ludvig.parsson@axis.com>
Link: https://patch.msgid.link/20250305-regulator_lockdep_fix-v1-1-ab938b12e790@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two ways to set the output voltage of the LD05
regulator. First by writing to the voltage selection registers
and second by toggling the SD_VSEL signal.
Usually board designers connect SD_VSEL to the VSELECT signal
controlled by the USDHC controller, but in some cases the
signal is hardwired to a fixed low level (therefore selecting
3.3V as initial value for allowing to boot from the SD card).
In these cases, the voltage is only determined by the value
of the LDO5CTRL_L register. Introduce a property
nxp,sd-vsel-fixed-low to let the driver know that SD_VSEL
is low and there is no GPIO to actually get that
information from dynamically.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://patch.msgid.link/20250303132258.50204-1-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Sebastian Reichel <sebastian.reichel@collabora.com>:
This introduces devm_of_regulator_get without the _optional suffix, since
that is more sensible for the Rockchip usecase.
The Rockchip power-domain controller also plans to make use of
per-domain regulators similar to the MediaTek power-domain controller.
Since existing DTs are missing the regulator information, the kernel
should fallback to the automatically created dummy regulator if
necessary. Thus the version without the _optional suffix is needed.
The Rockchip driver plans to use the managed version, but to be
consistent with existing code the unmanaged version is added at the
same time.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20250220-rk3588-gpu-pwr-domain-regulator-v6-1-a4f9c24e5b81@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The SD_VSEL GPIO is fetched twice for no reason. Remove the
duplicate code.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://patch.msgid.link/20250219080152.11883-1-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit cd7a38c40b.
When submitting the change above, it was thought that the origin of the
init_data should be a clear choice, from the driver or from DT but not
both.
It turns out some devices, such as qcom-msm8974-lge-nexus5-hammerhead,
relied on the old behaviour to override the init_data provided by the
driver, making it some kind of default if none is provided by the platform.
Using the init_data provided by the driver when it is present broke these
devices so revert the change to fixup the situation and add a comment
to make things a bit more clear
Reported-by: Luca Weiss <luca@lucaweiss.eu>
Closes: https://lore.kernel.org/lkml/5857103.DvuYhMxLoT@lucaweiss.eu
Fixes: cd7a38c40b ("regulator: core: do not silently ignore provided init_data")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20250211-regulator-init-data-fixup-v1-1-5ce1c6cff990@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AD5398_SW_POWER_DOWN was defined with a bit position outside the valid
range of the device's 16-bit register. The bitwise operation with an
unsigned short would always evaluate to 0, making the power down check
ineffective.
Update AD5398_SW_POWER_DOWN to use a valid bit position within the
16-bit range of the register.
Fixes: 19d022d67d ("regulator: ad5398: change enable bit name to improve readibility")
Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com>
Link: https://patch.msgid.link/20250206103153.59114-1-dheeraj.linuxdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Isaac Scott <isaac.scott@ideasonboard.com>:
The AD5398 is a DAC that can be used to control current flow in circuits
in a wide variety of applications such as motor control, or in my case,
LED control. I found when working with the current driver that it did
not work for my use case. It transpired that it only had support for
platform_data, and didn't appear to be correctly implemented according
to the datasheet, which can be found here:
https://www.analog.com/media/en/technical-documentation/data-sheets/ad5398.pdf
One example of this is the "soft power-down" bit being referred to in
the driver as simply "enable", which gives the impression that the
setting that bit will allow current through the regulator, which it does
not.
This series allows the regulator to be given its constraints via the
device tree, and makes the function of the enable register much more
obvious.
The LDO5 regulator has two configuration registers, but only
LDO5CTRL_L contains the bits for enabling/disabling the regulator.
Fixes: 0935ff5f1f ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20241218152842.97483-6-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
For LDO5 we need to be able to check the status of the SD_VSEL input in
order to know which control register is used. Read the status of the
SD_VSEL signal via GPIO and use the correct register accordingly.
To use this, the LDO5 node in the devicetree needs the sd-vsel-gpios
property to reference the GPIO that is used to read back the SD_VSEL
status internally. Please note that the SION bit in the IOMUX must be
set if the signal is muxed as VSELECT and controlled by the USDHC
controller.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://patch.msgid.link/20241218152842.97483-5-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 8c67a11bae.
It turns out that all boards using the PCA9450 actually have the
SD_VSEL input connected to the VSELECT signal of the SoCs SD/MMC
interface or use a fixed level.
The assumptions on which this was implemented were wrong. There
is no need for a GPIO-only-based approach and keeping this will
cause confusion and lead people to implement non-standard setups.
All in-tree users of this have been migrated and we can savely
remove this now and allow for a more future-proof approach
of syncing the actual status of SD_VSEL and the PMIC driver.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://patch.msgid.link/20241218152842.97483-4-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously, the ad5398 driver used only platform_data, which is
deprecated in favour of device tree. This caused the AD5398 to fail to
probe as it could not load its init_data. If the AD5398 has a device
tree node, pull the init_data from there using
of_get_regulator_init_data.
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20250128173143.959600-4-isaac.scott@ideasonboard.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mask name AD5398_CURRENT_EN_MASK is misleading, as it implies that
setting bit 16 of the AD5398 enables current flow. In fact, setting this
bit prevents current flow, due to this bit being a software power down
control. This bit is referred to as "soft power down" in the datasheet.
As such, change the name of the bit and modify its use in the driver to
make the regulator more intuitively usable.
(When calling ad5398_enable, current will start flowing, and vice
versa).
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20250128173143.959600-2-isaac.scott@ideasonboard.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A couple of fixes that have come in during the merge window, one that
operates the TPS6287x devices more within the design spec and can
prevent current surges when changing voltages and another more trivial
one for error message formatting.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeaIvMACgkQJNaLcl1U
h9B1uQf/a+9sU3VTS9gtSsxj6cN61Bd6TZTigwldCpD/Pxls11dUh0v9Anh53I5n
G7HvhkF8BUDM4Et8ycLiwAPYaQOR72J1UTi7bx27CZvAllLMByYtav3LHDK7gR8H
3yrkEZEVRM/yIEWr5TqAkDrErcNswP+7lpiyKCTGtraZ5d5Um74A7Twb8W82edYr
NYV9BgUoHRjWoGRz43AD7Vs7t9mGLPoRQmA/41w38Yh8HwXmcFfxRy0WLqR2V8o9
OAeh3fGFMfr3BmXweXgdeHS27q5wBxGcN2CyCny25XTeIChpdH3YBMj35GeaQZdM
EZoAtjt1h04rG+cMk7qlgBfT5cDhMg==
=6NN+
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that have come in during the merge window: one that
operates the TPS6287x devices more within the design spec and can
prevent current surges when changing voltages and another more trivial
one for error message formatting"
* tag 'regulator-fix-v6.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Add missing newline character
regulator: TPS6287X: Use min/max uV to get VRANGE
This was a very quiet release, aside from some smaller improvements we
have:
- Support for power budgeting on regulators, initially targeted at some
still in review support for PSE controllers but generally useful.
- Support for error interrupts from ROHM BD96801 devices.
- Support for NXP PCA9452.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeOYVoACgkQJNaLcl1U
h9D5tAf/RHg2j8OHQlTIjx8nebxIr8RRVmI5ltIlOA6biHsRzIHxOt7HjBaGTl78
qnpOJ8X+JUP5BP0F1n792e5f1HJykyIJA6nQnZfLIeUnLU2KsRPf1hJzDXgIvIoU
1cWuMe0j7oI0+DZYYY5G1AHw1n1J4M3HfXQyuWhfz1hlZTqBAWQSdkRyBp6Yyyth
m6XoAf72ADaKHB0GU6jbdNJJyO8D7rlwk0j6nlm0qoAIi52Se2ZeeJH707Wd/zGI
G3RF4MLkNUzOmzi3hJkhLILG5XwEQiu4pZGgOnYK6AdbxV8fWwq8PNzMqq/lb4Sl
A17Ib8eAPUPfVfUctAvx9DnGnaJKBw==
=Ttps
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This was a very quiet release, aside from some smaller improvements we
have:
- Support for power budgeting on regulators, initially targeted at
some still in review support for PSE controllers but generally
useful
- Support for error interrupts from ROHM BD96801 devices
- Support for NXP PCA9452"
* tag 'regulator-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: Add regulator-power-budget-milliwatt property
regulator: Add support for power budget
regulator: core: Resolve supply using of_node from regulator_config
regulator: of: Implement the unwind path of of_regulator_match()
regulator: tps65219: Remove debugging helper function
regulator: tps65219: Remove MODULE_ALIAS
regulator: tps65219: Update driver name
regulator: tps65219: Use dev_err_probe() instead of dev_err()
regulator: dt-bindings: mt6315: Drop regulator-compatible property
regulator: pca9450: Add PMIC pca9452 support
regulator: dt-bindings: pca9450: Add pca9452 support
regulator: pca9450: Use dev_err_probe() to simplify code
regulator: pca9450: add enable_value for all bucks
regulator: bd96801: Add ERRB IRQ
Changing voltage might ignore slew rate and cause a current surge.
With current implementation the driver will get the regulator to change
the voltage range used during run time. According to communication I
have had with Texas Instruments, this is not intended, since the
Dynamic Voltage Scaling in the hardware is only designed to work
within a voltage range. The current implementation will therefore
ignore the slew rate that is defined in devicetree when the voltage
range is changed during use.
The current implementation will always select a voltage in the most
accurate range that can reach that voltage even though multiple ranges
are able to reach that voltage. There are 4 Voltage ranges with the
following reach:
0b00: 0.4-0.71875V (1.25mV step size)
0b01: 0.4-1.0375V (2.5mV)
0b10: 0.4-1.675V (5mV)
0b11: 0.8-3.3V (10mV)
This in practice means that a change from below to above 0.71875V will
use the smallest range(0b00) for the values below and the second
smallest range(0b01) for the voltages above (Up to 1.675V). I have
timed how long it takes to go from below 0.71875V to above. The
increase was 100mV which, with the slew rate set to 1250µV/µs. This
in theory should take 80µs to do. With the current implementation, it
takes 10µs on my hardware. Doing the same test with the slew rate set
to 5000µV/µs, which should take 20µs, also only takes 10µs to do on
my hardware. Not only is this not in line with the technical
specification for the regulator. It also causes a current surge. Which
when calculating the output current, as described in the technical
specification, compared to what I could observe on my hardware the real
output is ~1A higher (~1.2A) than what I calculated it to be(~0.2A).
I tested also transitioning from a bigger to a smaller range, and the
results were the same.
Instead, let's limit the voltage range to a single one, which is in
line with the intended use of the regulator. This is done by looking
up the minimum and maximum requested voltage specified in devicetree.
Signed-off-by: Jonas Andreasson <jonas.andreasson@axis.com>
Link: https://patch.msgid.link/20250121-tps-fix-v2-1-50cc4d0f1635@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce power budget management for the regulator device. Enable tracking
of available power capacity by providing helpers to request and release
power budget allocations.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250115-feature_regulator_pw_budget-v2-1-0a44b949e6bc@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously, the regulator core resolved its supply only from the parent
device or its children, ignoring the of_node specified in the
regulator_config structure.
This behavior causes issues in scenarios where multiple regulator devices
are registered for components described as children of a controller, each
with their own specific regulator supply.
For instance, in a PSE controller with multiple PIs (Power Interfaces),
each PI may have a distinct regulator supply. However, the regulator core
would incorrectly use the PSE controller node or its first child to look up
the regulator supply, rather than the node specified by the
regulator_config->of_node for the PI.
This update modifies the behavior to prioritize the of_node in
regulator_config for resolving the supply. This ensures correct resolution
of the power supply for each device. If no supply is found in the provided
of_node, the core falls back to searching within the parent device as
before.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250109-b4-feature_poe_arrange-v2-13-55ded947b510@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_regulator_match() does not release the OF node reference in the error
path, resulting in an OF node leak. Therefore, call of_node_put() on the
obtained nodes before returning the EINVAL error.
Since it is possible that some drivers call this function and do not
exit on failure, such as s2mps11_pmic_driver, clear the init_data and
of_node in the error path.
This was reported by an experimental verification tool that I am
developing. As I do not have access to actual devices nor the QEMU board
configuration to test drivers that call this function, no runtime test
was able to be performed.
Fixes: 1c8fa58f47 ("regulator: Add generic DT parsing for regulators")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20250104080453.2153592-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Mark Brown <broonie@kernel.org>
This helper function is primarily used by developers for debugging & is
not a standard feature included in other PMIC drivers. The purpose of
debugging function is to check if rdev is determine if the regulator has
been registered prior to requesting a threaded irq. This case is already
handled with the ISERR(rdev) check because the error code is returned.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://patch.msgid.link/20241217204526.1010989-5-s-ramamoorthy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the same naming convention in tps6594-regulator.c with
tpsxxx-regulator instead of tpsxxx-pmic.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://patch.msgid.link/20241217204526.1010989-3-s-ramamoorthy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the error message format unified by switching from dev_err() to
dev_err_probe() where there is a chance of -EPROBE_DEFER returned. This
helps simplify the error code where possible.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://patch.msgid.link/20241217204526.1010989-2-s-ramamoorthy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the PMIC pca9452 support, which add ldo3 compared with pca9451a.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20241205-pca9450-v1-4-aab448b74e78@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set 'enable_value' in the regulator descriptor for different bucks to
manage their enable modes:
- 00b: OFF
- 01b: ON when PMIC_ON_REQ = H
- 10b: ON when PMIC_ON_REQ = H && PMIC_STBY_REQ = L
- 11b: Always ON
Ensure appropriate behavior based on the intended design. For example:
- Buck2, designed for vddarm, should be set to '10b' (ON when
PMIC_STBY_REQ = L) since it can be off when `PMIC_STBY_REQ = H` after the
kernel enters suspend.
- Other bucks remain '01b' (ON when PMIC_ON_REQ = H), matching the default
setting. This avoids the need to re-enable them during kernel boot as they
are already enabled after PMIC initialization.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20241205-pca9450-v1-1-aab448b74e78@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AXP717 datasheet says that regulator ramp delay is 15.625 us/step,
which is 10mV in our case.
Add a AXP_DESC_RANGES_DELAY macro and update AXP_DESC_RANGES macro to
expand to AXP_DESC_RANGES_DELAY with ramp_delay = 0
For DCDC4, steps is 100mv
Add a AXP_DESC_DELAY macro and update AXP_DESC macro to
expand to AXP_DESC_DELAY with ramp_delay = 0
This patch fix crashes when using CPU DVFS.
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Tested-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Fixes: d2ac3df75c ("regulator: axp20x: add support for the AXP717")
Link: https://patch.msgid.link/20241208124308.5630-1-simons.philippe@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ROHM BD96801 "scalable PMIC" provides two physical IRQs. The ERRB
handling can in many cases be omitted because it is used to inform fatal
IRQs, which usually kill the power from the SOC.
There may however be use-cases where the SOC has a 'back-up' emergency
power source which allows some very short time of operation to try to
gracefully shut down sensitive hardware. Furthermore, it is possible the
processor controlling the PMIC is not powered by the PMIC. In such cases
handling the ERRB IRQs may be beneficial.
Add support for ERRB IRQs.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/ZzWkny4lKpY09SX5@mva-rohm
Signed-off-by: Mark Brown <broonie@kernel.org>
A couple of fixes that came in during the merge window, plus
documetation of a new device ID for the Qualcomm LABIBB driver. There's
a core fix for the rarely used current constraints and a fix for the
Qualcomm RPMH driver which had described only one of the two voltage
ranges that the hardware could control, creating a potential
incompatibility with the configuration left by firmware.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdIcWQACgkQJNaLcl1U
h9DfPAf/T/w7ZNWOR52sK8et3itHVVu3YSxB92fMz/CdesUgApi2Q6Py/gw1sduQ
mY6vUd3aLkTI1Qi+XifeoRKOdRud0GRcgVILdg0J/KgzJ7EXEJ4pxE+uLE6Etuop
TGD9CY/rsX92vk9aOSPBPXfNtYB8JfBH4EgJSmHYl3V3kNe1jA32IbGUOVahA+vW
r9M1M40fuE6AsvfX47oN2mird9HyRjTRwwtrMzR8pqq3AZ8CRpPhngaxVpotmGOZ
UEaJj83WXKtja9iezYTQYmhj9yfw/c7A4UdqUFjAeScRHYxl3U+kue8MpjND1DQZ
kQfsgFoYLN6CTBhnognp1oyovixztQ==
=Lhu/
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, plus
documetation of a new device ID for the Qualcomm LABIBB driver.
There's a core fix for the rarely used current constraints and a fix
for the Qualcomm RPMH driver which had described only one of the two
voltage ranges that the hardware could control, creating a potential
incompatibility with the configuration left by firmware"
* tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Ignore unset max_uA constraints in current limit check
dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator
regulator: qcom-rpmh: Update ranges for FTSMPS525
tps65010, have undergone minor code improvements to enhance consistency and
fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0 capability
for consistent register map configuration across syscons of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced regulator
put and ensure proper synchronization during driver removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant improvements,
including the use of IRQ domains for various devices, fixing IRQ domain names
duplication, and code refactoring for better consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break statement in
the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver, along
with ensuring a clear relationship between IDs and model names, and allowing
multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved power
management.
- The adp5585 driver has reduced its dependencies by dropping the obsolete
dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397 driver,
expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name from
IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing regmap_del_irq_chip()
in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML format
for better readability and maintainability.
-----BEGIN PGP SIGNATURE-----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=YP3r
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
We should only consider max_uA constraints if they are explicitly defined.
In cases where it is not set, we should assume the regulator has no current
limit.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20241121-feature_poe_port_prio-v3-2-83299fa6967c@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This was a quite quiet release for regulators on the drivers front, but
we do have two small but useful core improvements:
- Improve handling of cases where DT platforms specify both DT and
init_data based configuration for a single regulator.
- A helper of_regulator_get_optional() to simplify writing generic
bindings for regulator consumers in subsystems.
There's also some YAML conversions for the DT bindings which are a big
part of the diffstat.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7O2AACgkQJNaLcl1U
h9C3Zwf/ZfnNpSjd6hWtsPQROmOXNvVJDvXeyC6ZWQPjBU31VAFt+6rtk/xMVTIp
cxaHG3PzeYkIk1VTm6yO5m3/kalIt4ECsJf62sfNNoltRcl0sJExt6ewKF6QjCN7
9OOAANJIWliApPj1ZQ+IIvddsF2Q0IqyioDLX+suGdNmNaZx4KnLP7dIAcluj3/d
w+pC/CbrrUy2ScFgxLUm3dH16nV8hYm/F9f5Dsob9AV7IpMN0suMwbAd6uq2+KZT
lLUw+kpkASetifhAfCjUGj8PIF+lMwW4WsuWgu4I0qiA9+FRDEyb6f0LQahs3d2G
NO98rrcS9kVYaJ1z83KuMHeYBI44sQ==
=AihX
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This was a quite quiet release for regulators on the drivers front,
but we do have two small but useful core improvements:
- Improve handling of cases where DT platforms specify both DT and
init_data based configuration for a single regulator.
- A helper of_regulator_get_optional() to simplify writing generic
bindings for regulator consumers in subsystems.
There's also some YAML conversions for the DT bindings which are a big
part of the diffstat"
* tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: qcom,rpmh: Correct PM8550VE supplies
regulator: Switch back to struct platform_driver::remove()
regulator: doc: remove documentation comment for regulator_init
regulator: doc: add missing documentation for init_cb
regulator: rk808: Restrict DVS GPIOs to the RK808 variant only
regulator: rk808: Use dev_err_probe() in the probe path
regulator: rk808: Perform trivial code cleanups
regulator: dt-bindings: qcom,qca6390-pmu: add more properties for wcn6855
regulator: dt-bindings: lltc,ltc3676: convert to YAML
regulator: core: Use fsleep() to get best sleep mechanism
regulator: core: remove machine init callback from config
regulator: core: add callback to perform runtime init
regulator: core: do not silently ignore provided init_data
regulator: max5970: Drop unused structs
regulator: dt-bindings: vctrl-regulator: convert to YAML
regulator: qcom-smd: make smd_vreg_rpm static
regulator: Call of_node_put() only once in rzg2l_usb_vbus_regulator_probe()
regulator: isl6271a: Drop explicit initialization of struct i2c_device_id::driver_data to 0
regulator: Add devres version of of_regulator_get_optional()
regulator: Add of_regulator_get_optional() for pure DT regulator lookup
All FTSMPS525 regulators support LV and MV ranges; however,
the boot loader firmware will determine which range to use as
the device boots.
Nonetheless, the driver cannot determine which range was selected,
so hardcoding the ranges as either LV or MV will not cover all cases
as it's possible for the firmware to select a range not supported by
the driver's current hardcoded values.
To this end, combine the ranges for the FTSMPS525s into one struct
and point all regulators to the updated combined struct. This should
work on all boards regardless of which range is selected by the firmware
and more accurately caputres the capability of this regulator on a
hardware level.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20241112002645.2803506-1-quic_molvera@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/regulator to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
A few whitespace changes are done en passant to make indention
consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/ab85510f83fa901e44d5d563fe6e768054229bfe.1731398433.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, RK809's BUCK3 regulator is modelled in the driver as a
configurable regulator with 0.5-2.4V voltage range. But the voltage
setting is not actually applied, because when bit 6 of
PMIC_POWER_CONFIG register is set to 0 (default), BUCK3 output voltage
is determined by the external feedback resistor. Fix this, by setting
bit 6 when voltage selection is set. Existing users which do not
specify voltage constraints in their device trees will not be affected
by this change, since no voltage setting is applied in those cases,
and bit 6 is not enabled.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Link: https://patch.msgid.link/20241017-rk809-dcdc3-v1-1-e3c3de92f39c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The X-Powers AXP323 is a very close sibling of the AXP313A. The only
difference seems to be the ability to dual-phase the first two DC/DC
converters.
Place the new AXP323 ID next to the existing AXP313A checks, to let
them share most code.
The only difference is the poly-phase detection code, which gets
extended to check the respective bit in a newly used register.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241007001408.27249-6-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
At the moment there is an implicit relationship between the AXP model
IDs and the order of the strings in the axp20x_model_names[] array.
This is fragile, and makes adding IDs in the middle error prone.
Make this relationship official by changing the ID type to the actual
enum used, and using indexed initialisers for the string list.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241007001408.27249-3-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
The rk808-regulator driver supports multiple PMIC variants from the Rockckip
RK80x and RK81x series, but the DVS GPIOs are supported on the RK808 variant
only, according to the DT bindings [1][2][3][4][5][6] and the datasheets for
the supported PMIC variants. [7][8][9][10][11][12]
Thus, change the probe path so the "dvs-gpios" property is checked for and
its value possibly used only when the handled PMIC variant is RK808. There's
no point in doing that on the other PMIC variants, because they don't support
the DVS GPIOs, and it goes against the DT bindings to allow a possible out-
of-place "dvs-gpios" property to actually be handled in the driver.
This eliminates the following messages, emitted when the "dvs-gpios" property
isn't found in the DT, from the kernel log on boards that actually don't use
the RK808 variant, which may have provided a source of confusion:
rk808-regulator rk808-regulator.2.auto: there is no dvs0 gpio
rk808-regulator rk808-regulator.2.auto: there is no dvs1 gpio
Furthermore, demote these kernel messages to debug messages, because they are
useful during the board bringup phase only. Emitting them afterwards, on the
boards that use the RK808 variant, but actually don't use the DVS0/1 GPIOs,
clutters the kernel log a bit, while they provide no value and may actually
cause false impression that some PMIC-related issues are present.
[1] Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
[2] Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
[3] Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
[4] Documentation/devicetree/bindings/mfd/rockchip,rk816.yaml
[5] Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
[6] Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml
[7] https://rockchip.fr/RK805%20datasheet%20V1.2.pdf
[8] https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2401261533_Rockchip-RK806-1_C5156483.pdf
[9] https://rockchip.fr/RK808%20datasheet%20V1.4.pdf
[10] https://rockchip.fr/RK816%20datasheet%20V1.3.pdf
[11] https://rockchip.fr/RK817%20datasheet%20V1.01.pdf
[12] https://rockchip.fr/RK818%20datasheet%20V1.0.pdf
Fixes: 1137529353 ("regulator: rk808: Add regulator driver for RK818")
Reported-by: Diederik de Haas <didi.debian@cknow.org>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://patch.msgid.link/9a415c59699e76fc7b88a2552520a4ca2538f44e.1728902488.git.dsimic@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Perform a few trivial code cleanups, to improve the accuracy and wording of
a couple of comments and the module description, and to avoid line wrapping
in a few places by using the 100-column width a bit better.
No intended functional changes are introduced by these code cleanups.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://patch.msgid.link/ac44aefcc7b3adbd8dcc5654a5ef8c493ce21ea0.1728902488.git.dsimic@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
_regulator_delay_helper() implements the recommondation of the outdated
documentation which sleep mechanism should be used. There is already a
function in place which does everything and also maps to reality called
fsleep().
Use fsleep() directly.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://patch.msgid.link/20241014-devel-anna-maria-b4-timers-flseep-v3-11-dc8b907cb62f@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The machine specific regulator_init() appears to be unused.
It does not allow a lot of interaction with the regulator framework,
since nothing from the framework is passed along (desc, config,
etc ...)
Machine specific init may also be done with the added init_cb() in
the regulator description, so remove regulator_init().
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20241008-regulator-ignored-data-v2-3-d1251e0ee507@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide an initialisation callback to handle runtime parameters.
The idea is similar to the regulator_init() callback, but it provides
regulator specific structures, instead of just the driver specific data.
As an example, this allows the driver to amend the regulator constraints
based on runtime parameters if necessary.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20241008-regulator-ignored-data-v2-2-d1251e0ee507@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On DT platforms, if a regulator init_data is provided in config, it is
silently ignored in favor of the DT parsing done by the framework, if
of_match is set.
of_match is an indication that init_data is expected to be set based on DT
and the parsing should be done by the regulator framework.
If the regulator provider passed init_data it must be because it is useful
somehow, in such case of_match should be clear.
If the driver expects the framework to initialize this data on its
own, it should leave init_data clear.
Warn if both init_data and of_match are set, then default to the provided
init_data.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20241008-regulator-ignored-data-v2-1-d1251e0ee507@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After splitting the max5970 into a MFD device clean the remaining
code and drop unused structs.
The struct max5970_data and enum max5970_chip_type aren't used.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://patch.msgid.link/20241002125500.78278-1-patrick.rudolph@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Chen-Yu Tsai <wenst@chromium.org>:
At ELCE, Sebastian told me about his recent work on adding regulator
supply support to the Rockchip power domain driver [2], how the MediaTek
driver has been using the existing devm_regulator_get() API and
reassigning different device nodes to the device doing the lookup, and
how the new of_regulator_get_optional() is the proper fit for this.
Patch 1 adds a new of_regulator_get_optional() function to look up
regulator supplies using device tree nodes.
Patch 2 adds a devres version of the aforementioned function at
Sebastian's request for the two power domain drivers.
Since smd_vreg_rpm is used only in
drivers/regulator/qcom_smd-regulator.c, make it static and fix the
following sparse warning:
drivers/regulator/qcom_smd-regulator.c:14:21: sparse: warning:
symbol 'smd_vreg_rpm' was not declared. Should it be static?
No functional changes intended.
Fixes: 5df3b41bd6 ("regulator: qcom_smd: Keep one rpm handle for all vregs")
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240926231038.31916-1-minhuadotchen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An of_node_put(config.of_node) call was immediately used after a pointer
check for a devm_regulator_register() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patch.msgid.link/f9d7a026-a67a-4164-80f4-578b1fbf71ac@web.de
Signed-off-by: Mark Brown <broonie@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While touching the initializer, also remove the comma after the sentinel
entry.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240920153430.503212-14-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are existing uses for a devres version of of_regulator_get_optional()
in power domain drivers. On MediaTek platforms, power domains may have
regulator supplies tied to them. The driver currently tries to use
devm_regulator_get() to not have to manage the lifecycle, but ends up
doing it in a very hacky way by replacing the device node of the power
domain controller device to the device node of the power domain that is
currently being registered, getting the supply, and reverting the device
node.
Provide a better API so that the hack can be replaced.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240925093807.1026949-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The to-be-introduced I2C component prober needs to enable regulator
supplies (and toggle GPIO pins) for the various components it intends
to probe. To support this, a new "pure DT lookup" method for getting
regulator supplies is needed, since the device normally requesting
the supply won't get created until after the component is probed to
be available.
Add a new of_regulator_get_optional() function for this. This mirrors
the existing regulator_get_optional() function, but is OF-specific.
The underlying code that supports the existing regulator_get*()
functions has been reworked in previous patches to support this
specific case.
Also convert an existing usage of "dev && dev->of_node" to
"dev_of_node(dev)".
Link: https://lore.kernel.org/all/20231220203537.83479-2-jernej.skrabec@gmail.com/ [1]
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240925093807.1026949-2-wenst@chromium.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
_regulator_get() contains a lot of common code doing checks prior to the
regulator lookup and housekeeping work after the lookup. Almost all the
code could be shared with a OF-specific variant of _regulator_get().
Split out the common parts so that they can be reused. The OF-specific
version of _regulator_get() will be added in a subsequent patch.
No functional changes were made.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240911072751.365361-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some comments here are referring to a non-existent
regulator_ops::get_voltage_vsel() where ::get_voltage_sel() is meant,
and similar for ::set_voltage_vsel() / ::set_voltage_sel().
Update the comments.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20240913-regulator-typos-v1-1-92781c93f638@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use irq_get_trigger_type() to replace irq_get_irq_data() and then
irqd_get_trigger_type(), if the irq data is NULL it will return 0.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240913013503.3754712-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The behavior of regulator_dev_lookup() for non-DT way has been broken
since the commit b8c3255457 ("regulator: Move OF-specific regulator
lookup code to of_regulator.c").
Before the commit, of_get_regulator() was used to get the regulator,
which returns NULL if the regulator is not found. So the regulator
will be looked up through regulator_lookup_by_name() if no matching
regulator is found in regulator_map_list.
However, currently, of_regulator_dev_lookup() is used to instead of
of_get_regulator(), but the variable 'r' is set to ERR_PTR(-ENODEV)
instead of NULL if the regulator is not found. In this case, if no
regulator is found in regulator_map_list, the variable 'r' is still
ERR_PTR(-ENODEV), So regulator_dev_lookup() returns the value of 'r'
directly instead of continuing to look up the regulator through
regulator_lookup_by_name().
Fixes: b8c3255457 ("regulator: Move OF-specific regulator lookup code to of_regulator.c")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20240911120338.526384-1-wei.fang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Few cleanups (safer code), built tested. Last two patches should
probably be tested.
Switch from rdev_get_drvdata() to container_of(), so the static
'struct max77650_regulator_desc' holding 'struct regulator_desc' can
be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-17-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch from rdev_get_drvdata() to container_of(), so the static
'struct hi6421v530_regulator_info' holding 'struct regulator_desc' can
be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-16-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static data with regulator description (struct
regulator_desc), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-14-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static data with regulator description (struct
pfuze_regulator), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-13-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static data with regulator description (struct
pcap_regulator), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-12-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static data with regulator description (struct
regulator_desc), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-11-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static data with regulator description (struct
regulator_desc), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-10-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static data with regulator description (struct
tps_driver_data), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-8-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static data with regulator description (struct
hi6421_spmi_reg_info), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-7-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static data with regulator description (struct
hi6421_regulator_info), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-6-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static data with regulator description (struct
da9121_range), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-4-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static data with device variant description
(struct da9063_dev_model), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-3-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static data with regulators description (struct
da9055_regulator_info), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-2-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not modify static data with regulators description (struct
da9052_regulator_info), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-1-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct regulator_desc' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
4974 736 16 5726 165e drivers/regulator/tps6287x-regulator.o
After:
=====
text data bss dec hex filename
5294 416 16 5726 165e drivers/regulator/tps6287x-regulator.o
--
Compile tested only
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/7727e493490d37775a653905dfe0cc1d8478f8e0.1725908163.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct regulator_desc' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
4419 2512 0 6931 1b13 drivers/regulator/wm8400-regulator.o
After:
=====
text data bss dec hex filename
6307 624 0 6931 1b13 drivers/regulator/wm8400-regulator.o
--
Compile tested only
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/fde33ecfd9bbdbdc1da1620c9f3b1b7a72f9d805.1725906876.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct regulator_desc' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
13982 2118 16 16116 3ef4 drivers/regulator/da9211-regulator.o
After:
=====
text data bss dec hex filename
14622 1478 16 16116 3ef4 drivers/regulator/da9211-regulator.o
--
Compile tested only
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/54258bfe11112d70d2f1eb1deda2791eb9ef99c1.1725784852.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct regulator_desc' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
3516 5320 32 8868 22a4 drivers/regulator/mp5416.o
After:
=====
text data bss dec hex filename
8508 320 32 8860 229c drivers/regulator/mp5416.o
--
Compile tested only
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/fd8d1307f211ec7754f46b6678c04309556003bc.1725807320.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Andre Przywara <andre.przywara@arm.com>:
This is remainder of the AXP717 fix series, containing support for the
boost regulator. This is meant to increase the battery voltage to the 5
volts required to provide the USB VBUS power.
It's the usual trinity of DT bindings patch (1/3), the MFD part
describing the PMIC registers (2/3) and the final patch to model the
regulator (3/3).
Compared to v2, this drops the merged patches, and just retains the
boost related parts. It also changes the internal name of the register
to AXP717_MODULE_EN_CONTROL_2, since there is another control register
we will need later for battery support.
The AXP717 also contains an adjustable boost regulator, to provide the
5V USB VBUS rail when running on battery.
Add the regulator description that states the voltage range this
regulator can cover.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20240816001824.6028-4-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor of_get_*regulator() to decrease indentation and increase readability.
No functional changes intended.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240904190856.1221459-1-andy.shevchenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's still a bit of OF-specific code in the regulator device lookup
function.
Move those bits of code over to of_regulator.c, and create a new
function of_regulator_dev_lookup() to encapsulate the code moved out of
regulator_dev_lookup().
Also mark of_find_regulator_by_node() as static, since there are no
other users in other compile units.
There are no functional changes. A line alignment was also fixed.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240904090016.2841572-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Previous commits cleaning up kerneldoc used the term "negative error
number" to refer to error condition return values. Update remaining
instances of other terminology such as "error code" or "errno" as
well so the whole regulator subsystem is unified.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-11-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
of_regulator_bulk_get_all() has a comment section that pretty much
resembles a kerneldoc block, except that the block begins with "/*"
instead of "/**".
Fix that and also rework the "Return" section and the error code
terminology so that it is the same as the other kerneldoc blocks
in the same file.
Fixes: 27b9ecc7a9 ("regulator: Add of_regulator_bulk_get_all")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-10-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains about missing "Return" section for the function
regulator_irq_map_event_simple().
Add a "Return" section for it based on its behavior. The function
actually always returns 0, but fills in fields in its @rid parameter as
needed. Expand the description of the parameter to cover this.
While at it fix a typo found in the description of the same function.
Reported-by: Matti Vaittinen <mazziesaccount@gmail.com>
Closes: https://lore.kernel.org/all/e341240e-1c1f-49a2-91cd-440888fdbda0@gmail.com/
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-9-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains about missing "Return" section for the function
regulator_register_always_on().
Add a "Return" section for it based on its behavior.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-8-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains about missing "Return" section for kerneldoc of
of_get_fixed_voltage_config(). The kerneldoc has a description
about the return values, just not in the format kernel-doc wants.
Convert it to use the proper "Return:" section header. The existing
description have been reworded and moved around to fit the grammar and
formatting.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains about missing "Return" section for many documented
functions in the regulator OF-specific code. These all have descriptions
about the return values, just not in the format kernel-doc wants.
Convert these to use the proper "Return:" section header. The existing
descriptions have been reworded and moved around to fit the grammar and
formatting.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-6-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains about missing "Return" section for many documented
functions in the regulator core. Some with free-form return value
descriptions have been fixed in the previous patch. The remaining are
completely missing any mention of return values.
Add "Return" sections to these kerneldoc blocks with basic descriptions.
In a few cases where the functions don't call even more functions and
the error numbers are known, those are documented in detail.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-5-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains about missing "Return" section for many documented
functions in the regulator core. Many of them actually have descriptions
about the return values, just not in the format kernel-doc wants.
Convert these to use the proper "Return:" section header. The existing
descriptions have been reworded and moved around to fit the grammar and
formatting.
In a few cases where the functions don't call even more functions
and the error numbers are known, those are documented in detail.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The kerneldoc for regulator_is_supported_voltage() states that the
return value is a boolean. That is not correct, as it could return an
error number if the check failed.
Fix the description by expanding it to cover the valid return values and
error conditions. The description is also converted to a proper "Return"
section.
Fixes: c5f3939b8f ("regulator: core: Support fixed voltages in regulator_is_supported_voltage()")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains that _regulator_check_status_enabled() is missing a
short description.
Since the current description is already quite short, just trim it a bit
more and use it as the short description.
Fixes: f7d7ad42a9 ("regulator: Allow regulators to verify enabled during enable()")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use of_property_read_bool() to read boolean properties rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT property pointer which is a problem for dynamically allocated
nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240828130056.3481050-2-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
