Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support (will cause merge conflicts in
drivers/power/supply/Makefile, but it's a simple fix) These changes
did touch outside of drivers/usb/ but got acks from the relevant
mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaeSx6g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynqjQCgqhbj0Pg2DiL+hZ4xEVlsKD8MJsMAn0vbdsR5
UiYztWABA245P1hO9i+K
=/fxh
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
* power-supply drivers
- S2MU005: new battery fuel gauge driver
- macsmc-power: new driver for Apple Silicon
- qcom_battmgr: Add support for Glymur and Kaanapali
- max17042: add support for max77759
- qcom_smbx: allow disabling charging
- bd71828: add input current limit support
- multiple drivers: use new device managed workqueue allocation
function
- misc. small cleanups and fixes
* reset core
- Expose sysfs for registered reboot_modes
* reset drivers
- misc. small cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=5Yic
-----END PGP SIGNATURE-----
Merge tag 'for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply drivers:
- S2MU005: new battery fuel gauge driver
- macsmc-power: new driver for Apple Silicon
- qcom_battmgr: Add support for Glymur and Kaanapali
- max17042: add support for max77759
- qcom_smbx: allow disabling charging
- bd71828: add input current limit support
- multiple drivers: use new device managed workqueue allocation
function
- misc small cleanups and fixes
Reset core:
- Expose sysfs for registered reboot_modes
Reset drivers
- misc small cleanups and fixes"
* tag 'for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (36 commits)
power: supply: qcom_smbx: allow disabling charging
power: reset: drop unneeded dependencies on OF_GPIO
power: supply: bd71828: add input current limit property
dt-bindings: power: reset: cortina,gemini-power-controller: convert to DT schema
power: supply: add support for S2MU005 battery fuel gauge device
dt-bindings: power: supply: document Samsung S2MU005 battery fuel gauge
power: reset: reboot-mode: fix -Wformat-security warning
power: supply: ipaq_micro: Simplify with devm
power: supply: mt6370: Simplify with devm_alloc_ordered_workqueue()
power: supply: max77705: Free allocated workqueue and fix removal order
power: supply: max77705: Drop duplicated IRQ error message
power: supply: cw2015: Free allocated workqueue
power: reset: keystone: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
power: supply: twl4030_madc: Drop unused header includes
power: supply: bq24190: Avoid rescheduling after cancelling work
power: supply: axp288_charger: Simplify returns of dev_err_probe()
power: supply: axp288_charger: Do not cancel work before initializing it
power: supply: cpcap-battery: pass static battery cell data from device tree
dt-bindings: power: supply: cpcap-battery: document monitored-battery property
power: supply: qcom_battmgr: Add support for Glymur and Kaanapali
...
- Add support for QEMU virt-ctrl, and use it for system reset and
power off on the virt platform,
- Defconfig updates,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaeCVXwAKCRCKwlD9ZEnx
cIhWAQCxwoddlBD7QRpLvcrtbrL20poOfGtf5pY3VZaohEbzzwEAlCnp0TnwuEES
gSKc5MVGDx9x6YdwyeFEX4PTU882YwI=
=kV2B
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Add support for QEMU virt-ctrl, and use it for system reset
and power off on the virt platform
- defconfig updates
- Miscellaneous fixes and improvements
* tag 'm68k-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: virt: Switch to qemu-virt-ctrl driver
power: reset: Add QEMU virt-ctrl driver
m68k: defconfig: Update defconfigs for v7.0-rc1
m68k: emu: Replace unbounded sprintf() in nfhd_init_one()
m68k: uapi: Add ucontext.h
m68k: defconfig: hp300: Enable monochrome and 16-color linux logos
m68k: q40: Remove commented out code
- add support for the PCIe M.2 Key E connectors in pwrseq-pcie-m2
- describe PCIe M.2 Mechanical Key E connectors in DT bindings
- add serdev helpers for looking up devices by OF nodes
- minor serdev core rework to enable support for PCIe M.2 Key E connectors
-----BEGIN PGP SIGNATURE-----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=Nqgg
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"For this release we have an extension of the pwrseq-pcie-m2 driver
with support for PCIe M.2 Key E connectors.
The rest of the commits fulfill a supporting role: document the
hardware in DT bindings, provide required serdev helpers (this has
been provided in an immutable branch to Rob Herring so you may see it
in his PR as well) and is followed up by some Kconfig fixes from Arnd.
Summary:
- add support for the PCIe M.2 Key E connectors in pwrseq-pcie-m2
- describe PCIe M.2 Mechanical Key E connectors in DT bindings
- add serdev helpers for looking up devices by OF nodes
- minor serdev core rework to enable support for PCIe M.2 Key E
connectors"
* tag 'pwrseq-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: pcie-m2: add SERIAL_DEV_BUS dependency
power: sequencing: pcie-m2: enforce PCI and OF dependencies
power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth
power: sequencing: pcie-m2: Add support for PCIe M.2 Key E connectors
dt-bindings: connector: Add PCIe M.2 Mechanical Key E connector
dt-bindings: serial: Document the graph port
serdev: Do not return -ENODEV from of_serdev_register_devices() if external connector is used
serdev: Add an API to find the serdev controller associated with the devicetree node
serdev: Convert to_serdev_*() helpers to macros and use container_of_const()
Add a new driver for the 'virt-ctrl' device found on QEMU virt machines
(e.g. m68k). This device provides a simple interface for system reset
and power off [1].
This driver utilizes the modern system-off API to register callbacks
for both system restart and power off. It also registers a reboot
notifier to catch SYS_HALT events, ensuring that LINUX_REBOOT_CMD_HALT
is properly handled. It is designed to be generic and can be reused by
other architectures utilizing this QEMU device.
Link: https://gitlab.com/qemu-project/qemu/-/blob/v10.2.0/hw/misc/virt_ctrl.c [1]
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260412211952.3564033-2-visitorckw@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The newly added serdev code fails to link when serdev is turned off:
arm-linux-gnueabi-ld: drivers/power/sequencing/pwrseq-pcie-m2.o: in function `pwrseq_pcie_m2_remove_serdev':
pwrseq-pcie-m2.c:(.text+0xc8): undefined reference to `serdev_device_remove'
arm-linux-gnueabi-ld: drivers/power/sequencing/pwrseq-pcie-m2.o: in function `pwrseq_m2_pcie_notify':
pwrseq-pcie-m2.c:(.text+0x69c): undefined reference to `of_find_serdev_controller_by_node'
arm-linux-gnueabi-ld: pwrseq-pcie-m2.c:(.text+0x6f8): undefined reference to `serdev_device_alloc'
arm-linux-gnueabi-ld: pwrseq-pcie-m2.c:(.text+0x724): undefined reference to `serdev_device_add'
Add another Kconfig dependency for this
Fixes: 3f736aecbd ("power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260401191030.948046-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The driver fails to build when PCI is disabled:
drivers/power/sequencing/pwrseq-pcie-m2.c: In function 'pwrseq_pcie_m2_register_notifier':
drivers/power/sequencing/pwrseq-pcie-m2.c:368:54: error: 'pci_bus_type' undeclared (first use in this function); did you mean 'pci_pcie_type'?
368 | ret = bus_register_notifier(&pci_bus_type, &ctx->nb);
| ^~~~~~~~~~~~
| pci_pcie_type
Similarly, when CONFIG_OF is disabled:
drivers/power/sequencing/pwrseq-pcie-m2.c: In function 'pwrseq_m2_pcie_create_bt_node':
drivers/power/sequencing/pwrseq-pcie-m2.c:191:9: error: implicit declaration of function 'of_changeset_init' [-Wimplicit-function-declaration]
191 | of_changeset_init(ctx->ocs);
| ^~~~~~~~~~~~~~~~~
Make both dependencies unconditional to prevent compile-testing
in either configuration.
Fixes: 3f736aecbd ("power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20260401091847.305294-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Hook up USBIN_CMD_IL so that writing "0" to the status register will
disable charging, this is useful to let users limit charging
automatically.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20260315-smb2-cherry-pick-v1-1-b2710e470490@ixit.cz
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly. For Kconfig entries that have no other dependencies: convert
it to requiring OF to avoid new symbols popping up for everyone in make
config, for others just drop it altogether.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260316-gpio-of-kconfig-v2-8-de2f4b00a0e4@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add input current property to be able to work around issues created by
automatic input limiting and have some control.
Disabling the automatic management is another step.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260401-bd-inp-limit-v1-1-689eb22531e2@kemnade.info
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
For supporting bluetooth over the non-discoverable UART interface of
WCN7850, create the serdev device after enumerating the PCIe interface.
This is mandatory since the device ID is only known after the PCIe
enumeration and the ID is used for creating the serdev device.
Since by default there is no OF or ACPI node for the created serdev,
create a dynamic OF 'bluetooth' node with the 'compatible' property and
attach it to the serdev device. This will allow the serdev device to bind
to the existing bluetooth driver.
Tested-by: Hans de Goede <johannes.goede@oss.qualcomm.com> # ThinkPad T14s gen6 (arm64)
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260326-pci-m2-e-v7-8-43324a7866e6@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Add support for handling the power sequence of the PCIe M.2 Key E
connectors. These connectors are used to attach the Wireless Connectivity
devices to the host machine including combinations of WiFi, BT, NFC using
interfaces such as PCIe/SDIO for WiFi, USB/UART for BT and I2C for NFC.
Currently, this driver supports only the PCIe interface for WiFi and UART
interface for BT. The driver also only supports driving the 3.3v/1.8v power
supplies and W_DISABLE{1/2}# GPIOs. The optional signals of the Key E
connectors are not currently supported.
Tested-by: Hans de Goede <johannes.goede@oss.qualcomm.com> # ThinkPad T14s gen6 (arm64)
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260326-pci-m2-e-v7-7-43324a7866e6@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Add support for MAX77759 battery charger driver. This is a 4A 1-Cell
Li+/LiPoly dual input switch mode charger. While the device can support
USB & wireless charger inputs, this implementation only supports USB
input. This implementation supports both buck and boost modes.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260325-max77759-charger-v9-5-4486dd297adc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add two new members to the power_supply_usb_type to represent the
USB Power Delivery (PD) Standard Power Range (SPR) Adjustable Voltage
Supply (AVS) charging types:
POWER_SUPPLY_USB_TYPE_PD_SPR_AVS: For devices supporting only the
PD SPR AVS type.
POWER_SUPPLY_USB_TYPE_PD_PPS_SPR_AVS: For devices that support both
PD Programmable Power Supply (PPS) and PD SPR AVS.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20260316150301.3892223-3-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samsung's S2MU005 PMIC, which contains battery charger functionality
also includes a battery fuel gauge device, which is separate from the
PMIC itself, and typically connected to an I2C bus. Add a generic driver
to support said device.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Co-developed-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://patch.msgid.link/20260304-s2mu005-fuelgauge-v3-2-e4dc4e47cde8@disroot.org
[Moved mutex init before power-supply registration]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The device_create() function expects a format string to construct a device
name, so passing a variable here introduces a possible vulnerability in
case the string can contain '%' characters:
drivers/power/reset/reboot-mode.c:148:22: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security]
drivers/power/reset/reboot-mode.c:148:22: note: treat the string as an argument to avoid this
148 | (void *)priv, reboot->dev->driver->name);
Use an trivial "%s" format instead and pass the name as the string to be
included here.
Fixes: cfaf0a9078 ("power: reset: reboot-mode: Expose sysfs for registered reboot_modes")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260306150738.497978-1-arnd@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Simplify the driver by using devm interfaces, which allow to drop
probe() error paths and the remove() callback.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260305-workqueue-devm-v2-6-66a38741c652@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Simplify the driver probe function by using
devm_alloc_ordered_workqueue() which handles the cleanup already.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply data (power_supply_changed()) status, thus
there is no point to run it for memory reclaim. Note that dev_name() is
not directly used in second argument to prevent possible unlikely
parsing any "%" character in device name as format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260305-workqueue-devm-v2-5-66a38741c652@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use devm interface for allocating workqueue to fix two bugs at the same
time:
1. Driver leaks the memory on remove(), because the workqueue is not
destroyed.
2. Driver allocates workqueue and then registers interrupt handlers
with devm interface. This means that probe error paths will not use a
reversed order, but first destroy the workqueue and then, via devm
release handlers, free the interrupt.
The interrupt handler schedules work on this exact workqueue, thus if
interrupt is hit in this short time window - after destroying
workqueue, but before devm() frees the interrupt - the schedulled
work will lead to use of freed memory.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply (power_supply_changed()) status, thus there
is no point to run it for memory reclaim. Note that dev_name() is not
directly used in second argument to prevent possible unlikely parsing
any "%" character in device name as format.
Fixes: 11741b8e38 ("power: supply: max77705: Fix workqueue error handling in probe")
Fixes: a6a494c8e3 ("power: supply: max77705: Add charger driver for Maxim 77705")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260305-workqueue-devm-v2-4-66a38741c652@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Core already prints error message on devm_request_threaded_irq()
failure, so no need to do that second time.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260305-workqueue-devm-v2-3-66a38741c652@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use devm interface so allocated workqueue will be freed during device
removal and error paths, thus fixing a memory leak.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to read updated data from the battery, thus there is no point to
run it for memory reclaim.
Cc: stable@vger.kernel.org
Fixes: b4c7715c10 ("power: supply: add CellWise cw2015 fuel gauge driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260305-workqueue-devm-v2-2-66a38741c652@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In pwrseq_pcie_m2_probe(), ctx->of_node acquires an explicit reference
to the device node using of_node_get(), but there is no corresponding
of_node_put() in the driver's error handling paths or removal.
Since the ctx is tied to the lifecycle of the platform device, there
is no need to hold an additional reference to the device's own of_node.
Fixes: 52e7b5bd62 ("power: sequencing: Add the Power Sequencing driver for the PCIe M.2 connectors")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260302-m2-v1-1-a6533e18aa69@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20260303175959.75647-1-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Driver does not use any code from workqueue.h and param.h.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220174938.672883-8-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Driver initializes delayed work and then registers interrupt handler
with devm interface. This means that device removal will not use a
reversed order, but first cancel pending work items and then, via devm
release handlers, free the interrupt.
The interrupt handler does not directly use/schedule work
items on the workqueue, however it updates the status of the battery
charger which might lead to calling power_supply_changed() and trigger
chain of calls leading to scheduling the work items. If this happens
during short time window after cancel_delayed_work_sync() in remove()
callback, the work would be rescheduled.
Avoid this by using devm interface to initialize and cancel work item,
thus having exactly reverse order during remove() in respect to rest of
the probe/cleanup paths. This is also more logical and readable code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220174938.672883-7-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
One of benefits of dev_err_probe() is that it returns the error value
greatly simplifying the error paths (e.g. three lines -> one line).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260220174938.672883-6-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Driver registered devm handler to cancel_work_sync() before even the
work was initialized, thus leading to possible warning from
kernel/workqueue.c on (!work->func) check, if the error path was hit
before the initialization happened.
Use devm_work_autocancel() on each work item independently, which
handles the initialization and handler to cancel work.
Fixes: 165c235774 ("power: supply: axp288_charger: Properly stop work on probe-error / remove")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260220174938.672883-5-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add an option to populate battery cell properties from the device tree if
the driver cannot access the battery's NVMEM.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://patch.msgid.link/20260130134021.353688-3-clamor95@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Glymur is a compute platform which has the same power supply properties
as X1E80100 and Kaanapali is a mobile platform which has the same power
supply properties as SM8550. Add support for the Glymur and Kaanapali
compatible strings.
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260209204915.1983997-6-anjelique.melendez@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This driver provides battery and AC status monitoring for Apple Silicon
Macs via the SMC (System Management Controller). It supports reporting
capacity, voltage, current, and charging status, and modifying the
charging behaviour across multiple generations of SMC firmware.
Signed-off-by: Hector Martin <marcan@marcan.st>
Co-developed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@kernel.org>
Co-developed-by: Michael Reeves <michael.reeves077@gmail.com>
Signed-off-by: Michael Reeves <michael.reeves077@gmail.com>
Link: https://patch.msgid.link/20260217-b4-macsmc-power-v7-1-4a4d63664362@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by sbsm_gpio_get_value() is
normalized to the [0, 1] range.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/aZYoL2MnTYU5FuQh@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Rename cpcap_battery_unkown_data to
cpcap_battery_unknown_data to correct a spelling mistake
in the identifier.
No functional change.
Signed-off-by: Jaime Saguillo Revilla <jaime.saguillo@gmail.com>
Link: https://patch.msgid.link/20260219212353.49416-1-jaime.saguillo@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Currently, there is no standardized mechanism for userspace to discover
supported reboot modes on a platform. This limits userspace scripts, to
rely on hardcoded assumptions about the available reboot-modes.
Create a class 'reboot-mode' and a device under it. Use the name of the
registering driver as device name. Expose a sysfs interface under this
device to show available reboot mode arguments.
This results in the creation of:
/sys/class/reboot-mode/<driver>/reboot_modes
This read-only sysfs file will exposes the supported reboot mode
arguments provided by the registering driver, enabling userspace to
query the list of arguments.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>
Link: https://patch.msgid.link/20260224-next-15nov_expose_sysfs-v24-2-4ee5b49d5a06@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Report the remaining time to full as calculated by the firmware for
devices that implement this.
Similar to time to empty, the reported value is only meaningful when
charging, i.e. if it is != U16_MAX.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260302-max77759-fg-v3-11-3c5f01dbda23@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Several (register) values reported by the fuel gauge depend on its
internal task period and it needs to be taken into account when
calculating results. All relevant example formulas in the data sheet
assume the default task period (of 5760) and final results need to be
adjusted based on the task period in effect.
Update the code as and where necessary.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260302-max77759-fg-v3-10-3c5f01dbda23@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The Maxim MAX77759 is a companion PMIC intended for use in mobile
phones and tablets. It is used on Google Pixel 6 and 6 Pro (oriole and
raven). Amongst others, it contains a fuel gauge that is similar to the
ones supported by this driver.
The fuel gauge can measure battery charge and discharge current,
battery voltage, battery temperature, and the Type C connector's
temperature.
The MAX77759 incorporates the Maxim ModelGauge m5 algorithm. It, as
well as previous generations like m3 on max17047/max17050, requires
the host to save/restore some register values across power cycles to
maintain full accuracy. Extending the driver for such support is out of
scope in this initial commit.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260302-max77759-fg-v3-9-3c5f01dbda23@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
shunt-resistor-micro-ohms is a standard property used to describe the
value of a shunt resistor required when measuring currents. Standard
properties should be used instead of vendor-specific ones of similar
intention when possible.
Try to read it from DT, and fall back to the vendor-specific property
maxim,rsns-microohm if unsuccessful for compatibility with existing
DTs.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260302-max77759-fg-v3-8-3c5f01dbda23@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When charging, the fuel gauge reports U16_MAX as time to empty.
Ignoring this special case (as this driver currently does), causes the
remaining time to be reported as ~102hours, which is incorrect.
Update the code to not return anything in this case.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260302-max77759-fg-v3-7-3c5f01dbda23@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If vmax has the default value of INT_MAX (e.g. because not specified in
DT), battery health is reported as over-voltage. This is because adding
any value to vmax (the vmax tolerance in this case) causes it to wrap
around, making it negative and smaller than the measured battery
voltage.
Avoid that by using size_add().
Fixes: edd4ab0559 ("power: max17042_battery: add HEALTH and TEMP_* properties support")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260302-max77759-fg-v3-6-3c5f01dbda23@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
dev_err_probe() exists to simplify code, harmonise error messages, and
set the deferred probe reason if relevant - there's no reason not to
use it here.
While at it, return the actual error from devm_regmap_init_i2c() rather
than overwriting with -EINVAL, when relevant.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260302-max77759-fg-v3-5-3c5f01dbda23@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fix this trivial typo where than should be used instead of then.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260302-max77759-fg-v3-4-3c5f01dbda23@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a single
real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use devres
consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio driver
along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x and
add more models to the list of supported variants
-----BEGIN PGP SIGNATURE-----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=Zhuy
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"
* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...
In case getting VDDIO regulator returned an error, WCN power sequencing
driver passes ret to dev_err_probe() as the error code, however it is
known that ret is 0 at this point. Pass PTR_ERR(ctx->vddio) instead.
Fixes: 0eb85f468e ("power: sequencing: qcom-wcn: add support for WCN39xx")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/aYXvQxKqmjP_sdCd@stanley.mountain/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260207-fix-wcn39xx-v1-1-df0606108ce2@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
pwrseq_power_on() calls pwrseq_unit_disable() when the
post_enable callback fails. However, this call is outside the
scoped_guard(mutex, &pwrseq->state_lock) block that ends.
pwrseq_unit_disable() has lockdep_assert_held(&pwrseq->state_lock),
which will fail when called from this error path.
Add the scoped_guard block to cover the post_enable callback and its
error handling to ensure the lock is held when pwrseq_unit_disable() is
called.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260130182651.1576579-1-n7l8m4@u.northwestern.edu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The driver uses separate error printing and error returning at probe()
for locations where the error value is hard-coded and can't be
EPROBE_DEFER. This helps to omit the extra return value check which is
done in dev_err_probe().
Using the dev_err_probe() has some other benefits besides handling the
-EPROBE_DEFER though, like standardizing the print for error numbers.
Some believe thes outweigh the benefit of skipping the extra check.
Use dev_err_probe() consistently in the bd71828 power-supply probe.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/aWi_GG74sZRfajA_@mva-rohm
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----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=A82v
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-clk-gpio-power-regulator-rtc-v6.20' into psy-next
Merge immutable branch between MFD, Clk, GPIO, Power, Regulator and RTC
due for the v6.20 merge window to apply further cleanups on top of the
BD72720 power-supply driver contained in this branch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
