The 1AH_M80H platform introduces a new firmware managed DRAM based
metrics table (amd_pmf_metrics_v3) covering the full platform telemetry
including power, voltages, frequencies, throttlers and activity monitors.
As a first consumer of this table, add NPU metrics retrieval. Unlike
earlier platforms that use a transfer table command, 1AH_M80H metrics
are accumulator based and require delta calculation between consecutive
samples.
Extend amd_pmf_npu_metrics with npu_temp, populated from the
npu_temp_acc accumulator field available on 1AH_M80H.
Key changes include:
- Add DRAM based metrics table support for the 1AH_M80H platform
- Introduce amd_pmf_get_tbl_dram_addr() to obtain the DRAM address
- Add amd_pmf_get_metrics_table_log_sample() to trigger metrics updates
- Add struct amd_pmf_metrics_v3 for the 1AH_M80H metrics format
- Implement accumulator based delta calculation for metrics
- Introduce amd_pmf_calculate_acc_npu_metrics() to get NPU metrics
- Introduce amd_pmf_supports_accumulator_metrics() to check the
accumulator based metrics support.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260723111534.1940925-8-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Refactor the NPU metrics retrieval code to use a switch-case structure
based on CPU ID, preparing the driver for supporting additional
platforms with different metrics table formats.
This change restructures amd_pmf_get_smu_metrics() to handle
platform-specific metrics retrieval paths. The existing logic for
1AH_M20H and 1AH_M60H platforms is preserved within the switch-case
block.
No functional changes.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260723111534.1940925-7-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace the open coded manual bit shifting used to split a 64-bit
physical address into its high and low 32-bit halves with the standard
kernel helpers upper_32_bits() and lower_32_bits().
No functional changes.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260723111534.1940925-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add the missing trailing newline to the dev_err() message printed when
an invalid CPU id is encountered.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260723111534.1940925-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Refactor metrics related code from core.c into a new metrics.c file
to improve code organization and maintainability. The metrics
functionality is evolving with new platform support, warranting a
separate file.
No functional changes.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260723111534.1940925-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add PCI device ID (0x115b) and ACPI ID (AMDI0109) to enable PMF driver
support for the AMD 1AH_M80H (Family 1AH Model 80H).
The 1AH_M80H platform introduces an extended SMU mailbox interface that
uses three argument registers instead of the single register used by
earlier platforms. Define five new register offsets for the 1AH_M80H
mailbox: message, response and three argument registers. The extended
argument registers are required because 1AH_M80H exposes metrics through
a firmware managed DRAM region. The GET_METRICS_TABLE_DRAM_ADDR command
returns a 64-bit physical address split across arg_reg[0] (low 32-bit)
and arg_reg[1] (high 32-bit), with the metrics table size in arg_reg[2].
Define amd_pmf_smu_regs_v2 to capture this extended register layout and
register it in pmf_pci_ids[] via PCI_DEVICE_DATA(), keeping the existing
amd_pmf_smu_regs_v1 shared instance for all prior platforms unchanged.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260723111534.1940925-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Different AMD platforms use varying SMU register layouts for PMF-SMU
mailbox communication. The register offsets are currently hardcoded as
AMD_PMF_REGISTER_MESSAGE, AMD_PMF_REGISTER_RESPONSE and
AMD_PMF_REGISTER_ARGUMENT directly in amd_pmf_send_cmd() and
amd_pmf_dump_registers(), making it difficult to support platforms that
use a different mailbox register layout without scattering per-platform
conditionals across the send path.
Introduce struct amd_pmf_smu_regs to capture the SoC-specific SMU
mailbox register offsets (msg_reg, resp_reg, arg_reg) and add a
pointer to it in struct amd_pmf_dev. RMB, PS, 1AH_M20H and 1AH_M60H
all share the same legacy register layout and point to a single shared
amd_pmf_smu_regs_v1 instance, avoiding redundant struct definitions.
Convert the pmf_pci_ids[] table from PCI_DEVICE() to PCI_DEVICE_DATA(),
embedding the smu_regs pointer directly as driver_data. Introduce
amd_pmf_get_smu_mb_offset() which resolves the matching PCI entry via
pci_match_id() at probe time and assigns driver_data to dev->smu_regs.
Update all SMU register accesses in amd_pmf_send_cmd() and
amd_pmf_dump_registers() to go through dev->smu_regs. Remove the
hardcoded register offset references from the send path. New platform
support requires only a new smu_regs instance and a corresponding
PCI_DEVICE_DATA() entry.
No functional changes for existing platforms.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260723111534.1940925-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Implement the ioctl handler for the util layer character device. This
support adds the actual functionality to populate PMF metrics from the
TA shared memory buffer and return them to userspace.
The implementation includes:
- amd_pmf_populate_data() to extract metrics from TA shared memory
- amd_pmf_set_ioctl() to handle userspace ioctl requests
- Size negotiation for forward/backward compatibility
- Feature-based population of struct fields
- Export amd_pmf_get_ta_custom_bios_inputs()
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609081044.2416731-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
These debug helper functions convert enumerated values to appropriate
message and can be useful for userspace tools and other kernel components
that need to interpret AMD PMF state values.
By making them inline functions in the UAPI header, they become available
to both kernel and userspace without code duplication. Also, prefix the
function names with amd_pmf_.
Also, include a case to cover unused enum entries.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609081044.2416731-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Relocate commonly used enums from multiple source files into a shared
header file to simplify code structure, improve readability, and
enhance maintainability. Also, remove the initialization of the first
enum member, since it is not needed.
Add the AMD_PMF_ prefix to the laptop_placement and platform_type enums
since these names are overly generic for inclusion in a UAPI header
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609081044.2416731-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a bios_output[] to amd_pmf_dev struct and store the latest values for
BIOS output policies when applying PMF policies. This enables the AMD PMF
util layer to expose these BIOS outputs alongside selected thermal and
power metrics to user space via /dev/amdpmf_interface and a new IOCTL,
supporting real-time monitoring tools such as SystemDeck.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609081044.2416731-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a util layer to AMD PMF that exposes a minimal userspace interface
via a character device for metrics monitoring and feature discovery.
This creates /dev/amdpmf_interface with basic ioctl support to retrieve
PMF metrics such as:
* Power source and power slider position
* Platform type, lid state, and user presence
* Skin temperature and ambient light
* BIOS input parameters (1-10)
* Graphics workload metrics
* CPU C-state residency (average and maximum)
* Socket power consumption
* Auto Mode: Automatic power profile switching based on system activity
* Static Power Slider: User-selectable power profiles
* Policy Builder (Smart PC): Action based policy management
* Dynamic Power Slider AC: Adaptive power profiles when on AC power
* Dynamic Power Slider DC: Adaptive power profiles when on battery
The interface enables smoother integration with userspace tools such as
AMD SystemDeck [1], which is widely used for monitoring and controlling
power and thermal behavior on AMD platforms. These tools help designers
keep major components within thermal limits to ensure proper operation
and enhance overall system stability and reliability.
The feature is gated behind the CONFIG_AMD_PMF_UTIL_SUPPORT Kconfig
option, allowing it to be disabled if not needed. The implementation
uses existing PMF infrastructure to populate data from the TA (Trusted
Application) shared memory buffer.
Link: https://docs.amd.com/v/u/en-US/68773_0.50 [1]
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609081044.2416731-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Addresses a low power limits issue on HP ZBook Ultra G1a.
If vendor firmware capped APU power limits with 3rd-party AC adapters,
the user can disable the Smart PC function via the module parameter
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4868 [1]
Signed-off-by: Alexey Zagorodnikov <xglooom@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260121143519.12318-1-xglooom@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The PMF driver retrieves NPU metrics data from the PMFW. Introduce a new
interface to make NPU metrics accessible to other drivers like AMDXDNA
driver, which can access and utilize this information as needed.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
[lizhi: save return value of is_npu_metrics_supported() and return it]
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260115173448.403826-1-lizhi.hou@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After resuming from hibernate, TEE commands can time out and cause PSP
disables. Fix this by reinitializing the Trusted Application (TA) and
cancelling the pb workqueue in the hibernate callbacks to avoid these
errors.
ccp 0000:c4:00.2: tee: command 0x5 timed out, disabling PSP
amd-pmf AMDI0107:00: TEE enact cmd failed. err: ffff000e, ret:0
amd-pmf AMDI0107:00: TEE enact cmd failed. err: ffff000e, ret:0
amd-pmf AMDI0107:00: TEE enact cmd failed. err: ffff000e, ret:0
Fixes: ae82cef7d9 ("platform/x86/amd/pmf: Add support for PMF-TA interaction")
Reported-by: Lars Francke <lars.francke@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/CAD-Ua_gfJnQSo8ucS_7ZwzuhoBRJ14zXP7s8b-zX3ZcxcyWePw@mail.gmail.com/
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
[ML: Add more tags]
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260116041132.153674-2-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Custom BIOS input values can be updated by multiple sources, such as power
mode changes and sensor events, each triggering a custom BIOS input event.
When these events occur in rapid succession, new data may overwrite
previous values before they are processed, resulting in lost updates.
To address this, introduce a fixed-size, power-of-two ring buffer to
capture every custom BIOS input event, storing both the pending request
and its associated input values. Access to the ring buffer is synchronized
using a mutex.
The previous use of memset() to clear the pending request structure after
each event is removed, as each BIOS input value is now copied into the
buffer as a snapshot. Consumers now process entries directly from the ring
buffer, making explicit clearing of the pending request structure
unnecessary.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251202042219.245173-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace mutex_init() with the devm_mutex_init(), to ensure proper mutex
cleanup during probe failure and driver removal.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20251119085813.546813-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Define a new macro BIOS_INPUTS_MAX, to represent the maximum number of
BIOS input values. Replace hardcoded array sizes in relevant structures
with this macro to improve readability and maintainability.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251119085813.546813-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace repetitive switch-case statements for PMF_POLICY_BIOS_OUTPUT_*
with a helper function and consolidated case handling. This reduces code
duplication and improves maintainability.
The 10 BIOS output policies (PMF_POLICY_BIOS_OUTPUT_1 through
PMF_POLICY_BIOS_OUTPUT_10) previously each had individual case statements
with identical logic. This patch introduces
amd_pmf_get_bios_output_idx() to map policy values to array indices,
consolidating the handling into a single case block with fallthrough.
Also, add a new function amd_pmf_update_bios_output() to simplify the code
handling.
This approach handles non-sequential policy enum values gracefully and
makes future additions easier to implement.
No functional changes.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20251127091038.2088387-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add METRICS_TABLE_ID (7) and use it when requesting the metrics
transfer table instead of the hard-coded literal. This clarifies the
meaning of the argument to amd_pmf_send_cmd() and centralizes the table
ID definition for easier maintenance.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251120105210.3945710-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add SET_CMD and GET_CMD constants and replace boolean values passed as the
get/set argument to amd_pmf_send_cmd() with the new explicit flags. This
improves readability, avoids ambiguity around true/false and 0/1 usage.
There is no functional change.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20251120105210.3945710-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Update smu_pmf_metrics_v2 to use NPU terminology instead of IPU. This
aligns the driver with current firmware/hardware naming and fixes the
mismatch. There is no functional change and no impact to the struct layout
and only field names are updated.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by:
Link: https://patch.msgid.link/20251120105210.3945710-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights
- amd/pmf:
- Add support for adjusting PMF PPT and PPT APU thresholds
- Extend custom BIOS inputs for more policies
- Update ta_pmf_action structure to the latest PMF TA
- arm64: thinkpad-t14s-ec: Add EC driver for ThinkPad T14s Gen6 Snapdragon
- int3472: Increase handshake GPIO delay
- intel/pmc:
- SSRAM support for Lunar Lake and Panther Lake
- Support reading substate requirements data from S0ix blockers
(for platforms starting from Panther Lake)
- Wildcat Lake support
- intel-uncore-freq:
- Solve duplicate sysfs entry warnings
- Present unique domain ID per package
- portwell-ec:
- Support suspend/resume
- Add hwmon support for voltage and temperature
- redmi-wmi: Add WMI driver for Redmibook keyboard
- think-lmi Certificate support for ThinkCenter
- x86-android-tables + others: Convert away from legacy GPIO APIs
- x86-android-tables:
- Add support for Acer A1-840 tablet
- Fix modules list for Lenovo devices
- Stop using EPROBE_DEFER
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
Add WMI driver for Redmibook keyboard:
- Add WMI driver for Redmibook keyboard
amd/hsmp:
- Replace dev_err() with dev_info() for non-fatal errors
amd/pmf:
- Add custom BIOS input support for AMD_CPU_ID_PS
- Add debug logs for pending requests and custom BIOS inputs
- Add helper to verify BIOS input notifications are enable/disable
- Add support for adjusting PMF PPT and PPT APU thresholds
- Call enact function sooner to process early pending requests
- Extend custom BIOS inputs for more policies
- Fix the custom bios input handling mechanism
- Preserve custom BIOS inputs for evaluating the policies
- Remove redundant ternary operators
- Update ta_pmf_action structure member
arm64: dts: qcom: x1e80100-t14s:
- add EC
arm64: thinkpad-t14s-ec:
- new driver
barco-p50-gpio:
- use software nodes for gpio-leds/keys
dell_rbu:
- fix assignment in if condition warning
dt-bindings: embedded-controller:
- Add Lenovo Thinkpad T14s EC
int3472:
- Convert int3472_gpio_map to use C99 initializers
- Increase ov08x40 handshake GPIO delay to 45 ms
- Rework regulator enable-time handling
intel/pmc:
- Add Wildcat Lake support to intel_pmc_core
- Add Wildcat Lake support to Intel PMC SSRAM Telemetry
- Enable SSRAM support for Lunar Lake
- Enable SSRAM support for Panther Lake
- Improve function to show substate header
- Move telemetry endpoint register handling
- Replace dev_warn() with dev_dbg()
- Show substate requirement for S0ix blockers
- use kcalloc() instead of kzalloc()
intel-uncore-freq:
- Fix warning in partitioned system
- Present unique domain ID per package
meraki-mx100:
- Use static device properties
pcengines-apuv2:
- Use static device properties
portwell-ec:
- Add hwmon support for voltage and temperature
- Add suspend/resume support for watchdog
- don't print superfluous errors
quickstart:
- Use devm_mutex_init()
think-lmi:
- Add certificate GUID structure
- Add extra TC BIOS error messages
- Certificate support for ThinkCenter
wmi-capdata01:
- Remove unneeded semicolon
x86-android-tablets:
- Add support for Acer A1-840 tablet
- convert EDT devices to GPIO references
- convert Goodix devices to GPIO references
- convert gpio_keys devices to GPIO references
- convert HiDeep devices to GPIO references
- convert HID-I2C devices to GPIO references
- convert int3496 devices to GPIO references
- convert Novatek devices to GPIO references
- convert Wacom devices to GPIO references
- convert wm1502 devices to GPIO references
- convert Yoga Tab2 fast charger to GPIO references
- Fix modules lists for Lenovo devices
- Move Acer info to its own file
- remove support for GPIO lookup tables
- Remove the use of dev_err_probe()
- replace bat_swnode with swnode_group
- Simplify lenovo_yoga_tab2_830_1050_exit()
- Simplify node-group [un]registration
- Stop using EPROBE_DEFER
- Update my email address
- use swnode_group instead of manual registering
xiaomi-wmi:
- Use devm_mutex_init()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaNu7iwAKCRBZrE9hU+XO
MV77AQCJzhaNcx/xhJ4RQZFOZfugIlRljMwmiBOHRAuh5tL59AD/R755jdRsrqgy
TralVm1h3aeGUeqpxtAxCx8xa+cI6gA=
=bJ/l
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf:
- Add support for adjusting PMF PPT and PPT APU thresholds
- Extend custom BIOS inputs for more policies
- Update ta_pmf_action structure to the latest PMF TA
- arm64:
- thinkpad-t14s-ec: Add EC driver for ThinkPad T14s Gen6 Snapdragon
- int3472:
- Increase handshake GPIO delay
- intel/pmc:
- SSRAM support for Lunar Lake and Panther Lake
- Support reading substate requirements data from S0ix blockers
(for platforms starting from Panther Lake)
- Wildcat Lake support
- intel-uncore-freq:
- Solve duplicate sysfs entry warnings
- Present unique domain ID per package
- portwell-ec:
- Support suspend/resume
- Add hwmon support for voltage and temperature
- redmi-wmi:
- Add WMI driver for Redmibook keyboard
- think-lmi:
- Certificate support for ThinkCenter
- x86-android-tables + others:
- Convert away from legacy GPIO APIs
- x86-android-tables:
- Add support for Acer A1-840 tablet
- Fix modules list for Lenovo devices
- Stop using EPROBE_DEFER
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
platform/x86: pcengines-apuv2: Use static device properties
platform/x86: meraki-mx100: Use static device properties
platform/x86: barco-p50-gpio: use software nodes for gpio-leds/keys
platform/x86: x86-android-tablets: Stop using EPROBE_DEFER
platform/x86: x86-android-tablets: Fix modules lists for Lenovo devices
platform/x86: x86-android-tablets: Simplify lenovo_yoga_tab2_830_1050_exit()
platform/x86: x86-android-tablets: Add support for Acer A1-840 tablet
platform/x86: x86-android-tablets: Move Acer info to its own file
platform/x86: x86-android-tablets: Update my email address
platform/x86: x86-android-tablets: Simplify node-group [un]registration
platform/x86: x86-android-tablets: use swnode_group instead of manual registering
platform/x86: x86-android-tablets: replace bat_swnode with swnode_group
platform/x86: x86-android-tablets: convert gpio_keys devices to GPIO references
platform/x86: x86-android-tablets: remove support for GPIO lookup tables
platform/x86: x86-android-tablets: convert Yoga Tab2 fast charger to GPIO references
platform/x86: x86-android-tablets: convert HID-I2C devices to GPIO references
platform/x86: x86-android-tablets: convert wm1502 devices to GPIO references
platform/x86: x86-android-tablets: convert int3496 devices to GPIO references
platform/x86: x86-android-tablets: convert EDT devices to GPIO references
platform/x86: x86-android-tablets: convert Novatek devices to GPIO references
...
Include the ACPI ID AMDI0108, which is used on upcoming AMD platforms, in
the PMF driver's list of supported devices.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20250915090546.2759130-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch adds debug logging capabilities to monitor early pending
requests and their associated custom BIOS inputs during runtime.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-10-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Call the amd_pmf_invoke_cmd_enact() function to manage early pending
requests and their associated custom BIOS inputs. Add a return statement
for cases of failure.
The PMF driver will adjust power settings according to custom BIOS inputs
after assessing the policy conditions.
Also, add a new common routine amd_pmf_handle_early_preq() to handle early
BIOS pending requests for both v1 and v2 variants.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-9-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The current code fails to send multiple BIOS input data to the PMF-TA
for policy condition evaluation. Only the most recent BIOS input data is
properly sent to the PMF-TA, while previous inputs are overwritten with
the zeros.
To address this issue, the BIOS input data should be stored and passed on
to the PMF-TA.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-8-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The PMF ACPI Specification (APMF) has been revised to version 1.3 to allow
for additional custom BIOS inputs, enabling OEMs to have more precise
thermal management of the system. This update includes adding support to
the driver using the new data structure received from the BIOS through the
existing APMF interfaces.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-7-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Implement a helper function to check if BIOS input notifications are
enabled or disabled.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The latest PMF TA has been updated with the additional structure members
for internal evaluation. Since this same structure is utilized in the
driver, it also needs to be updated on the driver side. Otherwise, there
will be a mismatch in the byte sizes when copying data from shared memory.
Suggested-by: Yijun Shen <Yijun.Shen@dell.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The existing amd_pmf driver is limited to supporting just two custom BIOS
inputs. However, with the updates to the latest PMF TA, there's a
requirement to broaden this capacity to handle 10 inputs, aligning with
the TA firmware's capabilities.
The necessary logic should be implemented to facilitate this expansion of
functionality.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Originally, the 'amd_pmf_get_custom_bios_inputs()' function was written
under the assumption that the BIOS would only send a single pending
request for the driver to process. However, following OEM enablement, it
became clear that multiple pending requests for custom BIOS inputs might
be sent at the same time, a scenario that the current code logic does not
support when it comes to handling multiple custom BIOS inputs.
To address this, the code logic needs to be improved to not only manage
multiple simultaneous custom BIOS inputs but also to ensure it is scalable
for future additional inputs.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The most recent PMF Trusted Application includes enhanced features that
allow for modifications to PMF thermal parameters such as PPT and PPT APU.
This update introduces the necessary driver support to utilize these
capabilities.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://lore.kernel.org/r/20250828122649.39574-1-liaoyuanhong@vivo.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
commit 5b1122fc49 ("platform/x86/amd/pmf: fix cleanup in
amd_pmf_init_smart_pc()") adjusted the error handling flow to use a ladder
but this isn't actually needed because work is only scheduled in
amd_pmf_start_policy_engine() and with device managed cleanups pointers
for allocations don't need to be freed.
Adjust the error flow to a single call to amd_pmf_deinit_smart_pc() for
the cases that need to clean up.
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250512211154.2510397-4-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-4-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If setting up smart PC fails for any reason then this can lead to
a double free when unloading amd-pmf. This is because dev->buf was
freed but never set to NULL and is again freed in amd_pmf_remove().
To avoid subtle allocation bugs in failures leading to a double free
change all allocations into device managed allocations.
Fixes: 5b1122fc49 ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()")
Link: https://lore.kernel.org/r/20250512211154.2510397-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgqSbkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGr6sH/1ICAvlin1GuxffE
ISVNz3xhXQpXG2k8yl9r0umpdCfPQbGrxm30vZyuIDNutY/FuMvkIqfu+Z1NnLg0
GidZW015LtXrp7/puKtTnUD5CPSjdETMXig+Q7c1PrxkkmHwz8sBbbm173AIDbDB
t7wwqSEUQh2AIDouGwN+DXB+6bR2FoOXb/k/njmtappIwR3rBc2f1HQJnP095rKO
5AKw1c9DMv5Wq2cEdBOCP48e4CFZEIN1ycW0nvtjpnOmcPOJjLoEothRbntQolqF
udtj5UeTGdAJqmjigv7KHmlrmFNe+GqBq4+beHl5MRxhBaT2uGGaM9jCJiSxT3Jx
sHyYYr8=
=Ddma
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc7' into x86/core, to pick up fixes
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
commit 376a8c2a14 ("platform/x86/amd/pmf: Update PMF Driver for
Compatibility with new PMF-TA") added support for platforms that support
an updated TA, however it also exposed a number of platforms that although
they have support for the updated TA don't actually populate a policy
binary.
Add an explicit check that the policy binary isn't empty before
initializing the TA.
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/platform-driver-x86/ae644428-5bf2-4b30-81ba-0b259ed3449b@heusel.eu/
Fixes: 376a8c2a14 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Christian Heusel <christian@heusel.eu>
Link: https://lore.kernel.org/r/20250423132002.3984997-3-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If a policy is passed into amd_pmf_get_pb_data() that causes the engine
to fail to start there is a memory leak. Free the memory in this failure
path.
Fixes: 10817f28e5 ("platform/x86/amd/pmf: Add capability to sideload of policy binary")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250423132002.3984997-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On some platforms it has been observed that STT limits are not being
applied properly causing poor performance as power limits are set too low.
STT limits that are sent to the platform are supposed to be in Q8.8
format. Convert them before sending.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Fixes: 7c45534afa ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Cc: stable@vger.kernel.org
Tested-by: Yijun Shen <Yijun_Shen@Dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250407181915.1482450-1-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights:
- alienware-wmi: Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities: Support for mic & audio mute LEDs
- samsung-galaxybook: Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl: RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
alienware-wmi:
- Add a state container for LED control feature
- Add a state container for thermal control methods
- Add alienware-wmi.h
- Add WMI Drivers
- Refactor hdmi, amplifier, deepslp methods
- Refactor LED control methods
- Refactor thermal control methods
- Rename alienware-wmi.c
- Split DMI table
- Split the alienware-wmi driver
- Update alienware-wmi config entries
- Update header and module information
amd/pmc:
- fix leak in probe()
- Move macros and structures to the PMC header file
- Notify user when platform does not support s0ix transition
- Remove unnecessary line breaks
- Use managed APIs for mutex
amd/pmf:
- convert timeouts to secs_to_jiffies()
amd:
- Use *-y instead of *-objs in Makefiles
arm64:
- add Huawei Matebook E Go EC driver
arm64: dts: qcom: gaokun3:
- Add Embedded Controller node
compal-laptop:
- Do not include <linux/fb.h>
dell-ddv:
- Fix temperature calculation
- Use devm_battery_hook_register
- Use the power supply extension mechanism
dell: dell-wmi-sysman:
- Use *-y instead of *-objs in Makefile
dell:
- Modify Makefile alignment
- Use *-y instead of *-objs in Makefile
dell-uart-backlight:
- Make dell_uart_bl_serdev_driver static
dt-bindings: platform:
- Add Huawei Matebook E Go EC
hp-bioscfg:
- Replace deprecated strncpy() with strscpy()
- Use wmi_instance_count()
hp:
- Use *-y instead of *-objs in Makefile
hwmon:
- (hp-wmi-sensors) Use the WMI bus API when accessing sensors
ideapad-laptop:
- use dev_groups to register attribute groups
int3472:
- Call "func" "con_id" instead
intel/pmc:
- Add Arrow Lake U/H support to intel_pmc_core driver
- Add Panther Lake support to intel_pmc_core
- Create generic_core_init() for all platforms
- Make tgl_core_generic_init() static
- Move arch specific action to init function
- Remove duplicate enum
- Remove simple init functions
- Remove unnecessary declarations in header
- Remove unneeded extern keyword in header
intel:
- Use *-y instead of *-objs in Makefile
irqdomain: platform/x86:
- Switch to irq_domain_create_linear()
lenovo-wmi-hotkey-utilities.c:
- Support for mic and audio mute LEDs
lenovo-yoga-tab2-pro-1380-fastcharger:
- Make symbol static
MAINTAINERS:
- Add documentation reference for Mellanox platform
- Update ALIENWARE WMI DRIVER entry
mellanox:
- Relocate mlx-platform driver
mlxbf-bootctl:
- Support sysfs entries for RTC battery status
mlx-platform:
- Change register name
- Cosmetic changes
samsung-galaxybook:
- Add samsung-galaxybook driver
- Fix block_recording not supported logic
sonypi:
- Use str_on_off() helper in sonypi_display_info()
think-lmi:
- Use ACPI object when extracting strings
- Use WMI bus API when accessing BIOS settings
thinkpad_acpi:
- check the return value of devm_mutex_init()
- convert timeouts to secs_to_jiffies()
- Do not include <linux/fb.h>
- Move HWMON initialization to tpacpi_hwmon_pdriver's probe
- Move subdriver initialization to tpacpi_pdriver's probe.
tools/power/x86/intel-speed-select:
- Die ID for IO dies
- Fix the condition to check multi die system
- Prefix header search path with sysroot
- Prevent increasing MAX_DIE_PER_PACKAGE
- v1.22 release
wmi:
- Call WCxx methods when setting data blocks
- Rework WCxx/WExx ACPI method handling
- Update documentation regarding the GUID-based API
- Use devres to disable the WMI device
x86-android-tablets:
- Add select POWER_SUPPLY to Kconfig
Merges:
- Merge branch 'fixes' into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ+QJyQAKCRBZrE9hU+XO
MUPYAP4sjtB8DKTIHgiQqado7PJZmdgpeJfAplitwKGe4BOcEQEA1mhuqMA5n6S+
jvbTtRF+jiKxis/5zAtAdChScM/pIgo=
=W+gy
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-14-a43967e36c88@linux.microsoft.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes and new HW support:
- amd/pmf:
- Fix error handling in amd_pmf_init_smart_pc()
- Fix missing hidden options for Smart PC
- surface: aggregator_registry: Add Support for Surface Pro 11
The following is an automated shortlog grouped by driver:
amd/pmf:
- fix cleanup in amd_pmf_init_smart_pc()
amd: pmf:
- Fix missing hidden options for Smart PC
MAINTAINERS:
- Update Ike Panhc's email address
surface: aggregator_registry:
- Add Support for Surface Pro 11
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ9Q9DAAKCRBZrE9hU+XO
MZE3AP9GnIgzXK1dFbuorGfNCHMol4TbR6oANflMBPvORWE54QD/XWwongTvUpFU
cgwVSasJb2fLso/nyBlVmYeKE7h8qAk=
=6Une
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support.
The diff is a bit larger than I'd prefer at this point due to
unwinding the amd/pmf driver's error handling properly instead of
calling a deinit function that was a can full of worms.
Summary:
- amd/pmf:
- Fix error handling in amd_pmf_init_smart_pc()
- Fix missing hidden options for Smart PC
- surface: aggregator_registry: Add Support for Surface Pro 11"
* tag 'platform-drivers-x86-v6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: Update Ike Panhc's email address
platform/x86/amd: pmf: Fix missing hidden options for Smart PC
platform/surface: aggregator_registry: Add Support for Surface Pro 11
platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()
amd_pmf_get_slider_info() checks the current profile to report correct
value to the TA inputs. If hidden options are in use then the wrong
values will be reported to TA.
Add the two compat options PLATFORM_PROFILE_BALANCED_PERFORMANCE and
PLATFORM_PROFILE_QUIET for this use.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Fixes: 9a43102daf ("platform/x86/amd: pmf: Add balanced-performance to hidden choices")
Fixes: 44e94fece5 ("platform/x86/amd: pmf: Add 'quiet' to hidden choices")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250306034402.50478-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There are a few problems in this code:
First, if amd_pmf_tee_init() fails then the function returns directly
instead of cleaning up. We cannot simply do a "goto error;" because
the amd_pmf_tee_init() cleanup calls tee_shm_free(dev->fw_shm_pool);
and amd_pmf_tee_deinit() calls it as well leading to a double free.
I have re-written this code to use an unwind ladder to free the
allocations.
Second, if amd_pmf_start_policy_engine() fails on every iteration though
the loop then the code calls amd_pmf_tee_deinit() twice which is also a
double free. Call amd_pmf_tee_deinit() inside the loop for each failed
iteration. Also on that path the error codes are not necessarily
negative kernel error codes. Set the error code to -EINVAL.
There is a very subtle third bug which is that if the call to
input_register_device() in amd_pmf_register_input_device() fails then
we call input_unregister_device() on an input device that wasn't
registered. This will lead to a reference counting underflow
because of the device_del(&dev->dev) in __input_unregister_device().
It's unlikely that anyone would ever hit this bug in real life.
Fixes: 376a8c2a14 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/232231fc-6a71-495e-971b-be2a76f6db4c@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Restore the previous behavior of the ACPI platform_profile sysfs
interface that has been changed recently in a way incompatible
with the existing user space (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmfLW54SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1VOUIAJwwmxAcJGHxbOPvK5r7jO/Rq4XFbMuT
ftNEX+awNFcBFtm7dgxhTjqZUFDDntvB/+BDuBMz1xsP2QRsW38R84hiVlJgisT1
XlMdqXalYQgN/MEQvS22AudyLBuWw1+/i9d8rZOf73wA9thOt5KrJa5IIieT1oJe
kd5Kf3onrmwSv5h38NqKkUzO2QdY5rluUG47HIaiNpe+HODDwf2NU335CUV4V69q
t6LKEoiSJ7Ziv7a5morXXu2Y26eTjK9kG8insGCgp/oK+nyxx5K8a7i/d8Hlp92b
X21G4P278lYTBDR4QoJrhKPyLqvNUx9qQ7KHXrNPZGY/c+g31yfvWC8=
=c0sa
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Restore the previous behavior of the ACPI platform_profile sysfs
interface that has been changed recently in a way incompatible with
the existing user space (Mario Limonciello)"
* tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86/amd: pmf: Add balanced-performance to hidden choices
platform/x86/amd: pmf: Add 'quiet' to hidden choices
ACPI: platform_profile: Add support for hidden choices
