The last step in having lynx_28g_lane_rmw() arguments that fully point
to their definitions is the removal of the current concatenation logic,
by which e.g. "LNaTGCR0, N_RATE_QUARTER, N_RATE_MSK" is expanded to
"LNaTGCR0, LNaTGCR0_N_RATE_QUARTER, LNaTGCR0_N_RATE_MSK".
There are pros and cons to the above. An advantage is the impossibility
to mix up fields of one register with fields of another. For example
both LNaTGCR0 and LNaRGCR0 contain an N_RATE_QUARTER field (one for the
lane RX direction, one for the lane TX).
But the two notable disadvantages are:
1. the impossibility to write expressions such as logical OR between
multiple fields. Practically, this forces us to perform more accesses
to hardware registers than would otherwise be needed. See the LNaGCR0
access for example.
2. the necessity to invent fields that don't exist, like SGMIIaCR1_SGPCS_DIS,
in order to clear SGMIIaCR1_SGPCS_EN (the real field name). This is
confusing, because sometimes, fields that end with _DIS really exist,
and it's best to not invent new field names.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-7-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, in macros such as lynx_28g_lane_rmw(), the driver has
macros which concatenate the LYNX_28G_ prefix with the "val" and "mask"
arguments. This is done to shorten function calls and not have to spell
out LYNX_28G_ everywhere.
But outside of lynx_28g_lane_rmw(), lynx_28g_lane_read() and
lynx_28g_pll_read(), this is not done, leading to an inconsistency in
the code.
Also, the concatenation itself has the disadvantage that searching the
arguments of these functions as full words (like N_RATE_QUARTER) leads
us nowhere, since the real macro definition is LNaTGCR0_N_RATE_QUARTER.
Some maintainers want register definitions in drivers to contain the
driver name as a prefix, but here, this has the disadvantages listed
above, so just remove that prefix.
The only change made here is the removal of LYNX_28G_.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-6-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, the bindings of this multi-lane SerDes are such that
consumers specify the lane index in the PHY cell, and the lane itself is
not described in the device tree.
It is desirable to describe individual Lynx 28G SerDes lanes in the
device tree, in order to be able to customize electrical properties such
as those in Documentation/devicetree/bindings/phy/transmit-amplitude.yaml
(or others).
If each lane may have an OF node, it appears natural for consumers to
have their "phys" phandle point to that OF node.
The problem is that transitioning between one format and another is a
breaking change. The bindings of the 28G Lynx SerDes can themselves be
extended in a backward-compatible way, but the consumers cannot be
modified without breaking them.
Namely, if we have:
&mac {
phys = <&serdes1 0>;
};
we cannot update the device tree to:
&mac {
phys = <&serdes1_lane_0>;
};
because old kernels cannot resolve this phandle to a valid PHY.
The proposal here is to keep tolerating existing device trees, which are
not supposed to be changed, but modify lynx_28g_xlate() to also resolve
the new format with #phy-cells = <0> in the lanes.
This way we support 3 modes:
- Legacy device trees, no OF nodes for lanes
- New device trees, OF nodes for lanes and "phys" phandle points towards
them
- Hybrid device trees, OF nodes for lanes (to describe electrical
parameters), but "phys" phandle points towards the SerDes top-level
provider
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-4-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This simplifies the main control flow a little bit and makes the logic
reusable for probing the lanes with OF nodes if those exist.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-3-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to IC engineer suggestion, set ssc_range as -4003 ppm
will have more tolerance for EMI, and suitable for more boards.
Besides, it's confirmed that with this setting the TX SSC test
will pass on one customer board.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251219081354.3806806-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Printing error messages on pm_runtime_put() returning negative values
is not particularly useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Accordingly, update mixel_lvds_phy_reset() to simply discard the return
value of pm_runtime_put().
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2012926.taCxCBeP46@rafael.j.wysocki
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Clear the PCS_TX_SWING_FULL field mask before setting the new value
in PHY_CTRL5 register. Without clearing the mask first, the OR operation
could leave previously set bits, resulting in incorrect register
configuration.
Fixes: 63c85ad0cd ("phy: fsl-imx8mp-usb: add support for phy tuning")
Suggested-by: Leonid Segal <leonids@variscite.com>
Acked-by: Pierluigi Passaro <pierluigi.p@variscite.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://patch.msgid.link/20251219160912.561431-1-stefano.r@variscite.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, the PHY only registers the typec orientation switch when it
is built in. If the typec driver is built as a module, the switch
registration is skipped due to the preprocessor condition, causing
orientation detection to fail.
With commit
45fe729be9 ("usb: typec: Stub out typec_switch APIs when CONFIG_TYPEC=n")
the preprocessor condition is not needed anymore and the orientation
switch is correctly registered for both built-in and module builds.
Fixes: b58f0f86fd ("phy: fsl-imx8mq-usb: add tca function driver for imx95")
Cc: stable@vger.kernel.org
Suggested-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20251126140136.1202241-1-fra.schnyder@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This phy supports both 24MHz and 100MHz clock inputs. By default it's
using XTAL 24MHz and the 100MHz clock is a alternate reference clock.
Add supports to use alternate reference clock in case 24MHz clock
can't work well.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20251118071947.2504789-2-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Searching the look-up-table runs so long as the frequency in the
table is at or below the desired rate. This works well in most
cases, but the next entry in the LUT might be closer to the
nominal value than the lower one. Add some logic to check
the higer value is any closer to the nominal value and use it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20250504204043.418924-3-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are two functions, round_rate and set_rate that duplicate
a lot of the same work, so simplify the code by creating a helper
function that will identify the phy settings for a desired clock
rate and return the structure with the corresponding settings.
>From this structure, the round_rate and set_rate can both get what
they need to achieve the clock setting closest to the desired rate
as possible while minimizing the duplicated code.
Also rename phy_clk_set_rate to fsl_samsung_hdmi_phy_clk_set_rate.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20250504204043.418924-2-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy_clk_round_rate sounds like a generic helper function. In
reality, it is unique to the phy-fsl-samsung-hdmi. Rename
phy_clk_round_rate to fsl_samsung_hdmi_phy_clk_round_rate.
No functional change intended.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20250504204043.418924-1-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The i.MX8MP and i.MX95 USB3 PHY have different tuning parameter for same
tuning field, this will add i.MX95 tuning support.
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250430094502.2723983-4-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The description of TX_VBOOST_LVL is wrong in register PHY_CTRL3
bit[31:29].
The updated description as below:
011: Corresponds to a launch amplitude of 0.844 V.
100: Corresponds to a launch amplitude of 1.008 V.
101: Corresponds to a launch amplitude of 1.156 V.
This will fix the parsing function
phy_tx_vboost_level_from_property() to return correct value.
Fixes: 63c85ad0cd ("phy: fsl-imx8mp-usb: add support for phy tuning")
Cc: stable@vger.kernel.org
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250430094502.2723983-3-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Ensure the PHY reset and perst is asserted during power-off to
guarantee it is in a reset state upon repeated power-on calls. This
resolves an issue where the PHY may not properly initialize during
subsequent power-on cycles. Power-on will deassert the reset at the
appropriate time after tuning the PHY parameters.
During suspend/resume cycles, we observed that the PHY PLL failed to
lock during resume when the CPU temperature increased from 65C to 75C.
The observed errors were:
phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110
imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110
imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110
This resulted in a complete CPU freeze, which is resolved by ensuring
the PHY is in reset during power-on, thus preventing PHY PLL failures.
Cc: stable@vger.kernel.org
Fixes: 1aa97b0022 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Remove the switch statement and base perst release on whether it is
found in the device tree. The probe function fails without the reset
property, making it mandatory. Therefore, always release reset
independent of the variant.
This does not change the behavior of the driver but reduces driver
complexity and allows for easier future modifications.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250305144355.20364-2-eichest@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The i.MX95 USB3 phy has a Type-C Assist block (TCA). This block consists
two functional blocks (XBar assist and VBus assist) and one system
access interface using APB.
The primary functionality of XBar assist is:
- switching lane for flip
- moving unused lanes into lower power states.
This info can be get from:
i.MX95 RM Chapter 163.3.8 Type-C assist (TCA) block.
This will add support for TCA block to achieve lane switching and tca
lower power functionality.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20241204050907.1081781-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since commit 7ef9651e97 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables the clocks for the
whole lifetime of the device. Moreover, it is no longer necessary to
unprepare and disable the clocks explicitly.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/tencent_9087BCE04E38E6AA5C4B2252B82FA99C2009@qq.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
FIELD_PREP() checks that a value fits into the available bitfield,
but the index div equals to 4,is out of range.
which gcc complains about:
In function ‘fsl_samsung_hdmi_phy_configure_pll_lock_det’,
inlined from ‘fsl_samsung_hdmi_phy_configure’ at
drivers/phy/freescale/phy-fsl-samsung-hdmi.c :470:2:
././include/linux/compiler_types.h:542:38: error: call to ‘__compiletime_assert_538’
declared with attribute error: FIELD_PREP: value too large for the field
542 | _compiletime_assert(condition, msg, __compiletime_assert_,
__COUNTER__)
| ^
././include/linux/compiler_types.h:523:4: note: in definition of
macro ‘__compiletime_assert’ 523 | prefix ## suffix();
| ^~~~~~
././include/linux/compiler_types.h:542:2: note: in expansion of macro
‘_compiletime_assert’
542 | _compiletime_assert(condition, msg, __compiletime_assert_,
__COUNTER__)
REG12_CK_DIV_MASK only two bit, limit div to range 0~3,
so build error will fix.
Fixes: d567679f2b ("phy: freescale: fsl-samsung-hdmi: Clean up fld_tg_code calculation")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Changlog:
Reviewed-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/tencent_6F503D43467AA99DD8CC59B8F645F0725B0A@qq.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Kernel test robot returns the following warning:
do_div() does a 64-by-32 division, please consider using div64_ul instead.
To prevent the 64-by-32 divsion, consolidate both the multiplication
and the do_div into one line which explicitly uses u64 sizes.
Fixes: 1951dbb41d ("phy: freescale: fsl-samsung-hdmi: Support dynamic integer")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412091243.fSObwwPi-lkp@intel.com/
Link: https://lore.kernel.org/r/20241215220555.99113-1-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, the calcuation for fld_tg_code is based on a lookup table,
but there are gaps in the lookup table, and frequencies in these
gaps may not properly use the correct divider. Based on the description
of FLD_CK_DIV, the internal PLL frequency should be less than 50 MHz,
so directly calcuate the value of FLD_CK_DIV from pixclk.
This allow for proper calcuation of any pixel clock and eliminates a
few gaps in the LUT.
Since the value of the int_pllclk is in Hz, do the fixed-point
math in Hz to achieve a more accurate value and reduces the complexity
of the caluation to 24MHz * (256 / int_pllclk).
Fixes: 6ad082bee9 ("phy: freescale: add Samsung HDMI PHY")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20241026132014.73050-3-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are a series of for-loops which check various values of P and S
for the integer divder PLL. The for loops search all entries and use
the one closest to the nominal, but it continues to searches through
all for loops even after the nominal is achieved. Ending when the
nominal value is found stops wasting time, since it will not find
a better value than a deviation of 0 Hz.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20241026132014.73050-2-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Integer divder uses values of P,M, and S to determine the PLL
rate. Currently, the range of M was set based on a series of
table entries where the range was limited. Since the ref manual
shows it is 8-bit wide, expand the range to be up to 255.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20241026132014.73050-1-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- New Support
- ST STM32MP25 combophy support
- Sparx5 support for lan969x serdes and updates to driver to support this
- NXP PTN3222 eUSB2 to USB2 redriver
- Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2 support,
X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP UFS PHY
support and SA8775P eDP PHY support
- Rockchip rk3576 usbdp and rk3576 usb2 phy support
- Binding for Microchip ATA6561 can phy
- Updates
- Freescale driver updates from hdmi support
- Conversion of rockchip rk3228 hdmi phy binding to yaml
- Broadcom usb2-phy deprecated support dropped and USB init array update
for BCM4908
- TI USXGMII mode support in J7200
- Switch back to platform_driver::remove() subsystem update
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmdG0uwACgkQfBQHDyUj
g0ftFg//ftcsFV6HQp+MXTzgBrlXk1EbIXSfG1R1k2jSSzwUMgQkNkIXJ9bUVSRA
yvgn+JJ2OtoIBYVVyNbDghw6CBYc7TMcK+1PPcS43o63X/giXiQ+QLN+J19PxDOl
fgDvRgp4SHxWW3DAQW0Kgle7VCTWBIHCR3C06RG7I2AlIoWyzkNsI4SM8hSrnaon
9FzBqGZCSnGgorfUgEkWjv4TDK69xZOOG1bIbsX/xA1wY3vvRzJg3R7TGYqC35/F
XII5oHpv0kBjNwZhU4xR5YF6IDqakRa5UNviXi7DKzbyD277lkrCCccvq0EU4Vau
m7bv3nNTUKqk/EQBSEWCDYECD5Xw57Qa6i/qo3gMXIVoDm6jfUDP3MbPG0IllLBZ
+X34i1pq24gZLl+2rSMHMi8IlyTrpCgBsCeH/xsgkEev6Sr9gHI9Hqd1mnMHNa3G
U31kaY/eEfDy377k2l8hFKx3pT+Qsne9jbjOzdIuciL10+0xqwCOCrAJA6JjyxTI
ONcbRZRIwHAg48gPyMmqRXd5xnr+8epCedaRo0j4O8gJpSBCXzXCIIS3DlBlwmIc
WJkF5jN6WGunmI5yYd19256gVK2SPv0YA+UNFeQDF6d9djHaGaKvH2Is4zMe3JOW
mBfYwJLC39d8v3u4rBNSAR8a1HM9haAdcNctkrNmONMEtS9hsg0=
=5o8/
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hardware support:
- ST STM32MP25 combophy support
- Sparx5 support for lan969x serdes and updates to driver to support
this
- NXP PTN3222 eUSB2 to USB2 redriver
- Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
UFS PHY support and SA8775P eDP PHY support
- Rockchip rk3576 usbdp and rk3576 usb2 phy support
- Binding for Microchip ATA6561 can phy
Updates:
- Freescale driver updates from hdmi support
- Conversion of rockchip rk3228 hdmi phy binding to yaml
- Broadcom usb2-phy deprecated support dropped and USB init array
update for BCM4908
- TI USXGMII mode support in J7200
- Switch back to platform_driver::remove() subsystem update"
* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
phy: qcom: qmp: Fix lecacy-legacy typo
phy: lan969x-serdes: add support for lan969x serdes driver
dt-bindings: phy: sparx5: document lan969x
phy: sparx5-serdes: add support for branching on chip type
phy: sparx5-serdes: add indirection layer to register macros
phy: sparx5-serdes: add function for getting the CMU index
phy: sparx5-serdes: add ops to match data
phy: sparx5-serdes: add constant for the number of CMU's
phy: sparx5-serdes: add constants to match data
phy: sparx5-serdes: add support for private match data
phy: bcm-ns-usb2: drop support for old binding variant
dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
...
When enable initcall_debug together with higher debug level below.
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=9
CONFIG_CONSOLE_LOGLEVEL_QUIET=9
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
The initialization of i.MX8MP PCIe PHY might be timeout failed randomly.
To fix this issue, adjust the sequence of the resets refer to the power
up sequence listed below.
i.MX8MP PCIe PHY power up sequence:
/---------------------------------------------
1.8v supply ---------/
/---------------------------------------------------
0.8v supply ---/
---\ /--------------------------------------------------
X REFCLK Valid
Reference Clock ---/ \--------------------------------------------------
-------------------------------------------
|
i_init_restn --------------
------------------------------------
|
i_cmn_rstn ---------------------
-------------------------------
|
o_pll_lock_done --------------------------
Logs:
imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges:
imx6q-pcie 33800000.pcie: IO 0x001ff80000..0x001ff8ffff -> 0x0000000000
imx6q-pcie 33800000.pcie: MEM 0x0018000000..0x001fefffff -> 0x0018000000
probe of clk_imx8mp_audiomix.reset.0 returned 0 after 1052 usecs
probe of 30e20000.clock-controller returned 0 after 32971 usecs
phy phy-32f00000.pcie-phy.4: phy poweron failed --> -110
probe of 30e10000.dma-controller returned 0 after 10235 usecs
imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
dwhdmi-imx 32fd8000.hdmi: Detected HDMI TX controller v2.13a with HDCP (samsung_dw_hdmi_phy2)
imx6q-pcie 33800000.pcie: probe with driver imx6q-pcie failed with error -110
Fixes: dce9edff16 ("phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support")
Cc: stable@vger.kernel.org
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
v2 changes:
- Rebase to latest fixes branch of linux-phy git repo.
- Richard's environment have problem and can't sent out patch. So I help
post this fix patch.
Link: https://lore.kernel.org/r/20241021155241.943665-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/phy/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241009065307.504930-2-u.kleine-koenig@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The lookup table contains entries which use the integer divider
instead of just the fractional divider. Since the set and round
functions check both the integer divider values and the LUT values,
it's no longer necessary to keep the integer divider values in the
lookup table, as can be dynamically calcuated.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Link: https://lore.kernel.org/r/20240914112816.520224-6-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, if the clock values cannot be set to the exact rate,
the round_rate and set_rate functions use the closest value found in
the look-up-table. In preparation of removing values from the LUT
that can be calculated evenly with the integer calculator, it's
necessary to ensure to check both the look-up-table and the integer
divider clock values to get the closest values to the requested
value. It does this by measuring the difference between the
requested clock value and the closest value in both integer divider
calucator and the fractional clock look-up-table.
Which ever has the smallest difference between them is returned as
the closest rate.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20240914112816.520224-5-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is currently a look-up table for a variety of resolutions.
Since the phy has the ability to dynamically calculate the values
necessary to use the intger divider which should allow more
resolutions without having to update the look-up-table.
If the lookup table cannot find an exact match, fall back to the
dynamic calculator of the integer divider.
Previously, the value of P was hard-coded to 1, this required an
update to the phy_pll_cfg table to add in the extra value into the
table, so if the value of P is calculated to be something else
by the PMS calculator, the calculated_phy_pll_cfg structure
can be used instead without having to keep track of which method
was used.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20240914112816.520224-4-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The value of 'S' is writen to two places, PHY_REG3[7:4] and
PHY_REG21[3:0]. There is a lookup table which contains
the value of PHY_REG3. Rather than using a switch statement
based on the pixel clock to search for the value of 'S' again,
just shift the contents of PHY_REG3[7:4] >> 4 and place the value
in PHY_REG21[3:0]. Doing this can eliminate an entire function.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Link: https://lore.kernel.org/r/20240914112816.520224-3-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are 47 registers defined as PHY_REG_xx were xx goes from 00 to
47. Simplify this by replacing them all with a macro which is passed
the register number to return the proper register offset.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Link: https://lore.kernel.org/r/20240914112816.520224-2-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to fsl,imx8mq-usb-phy.yaml, this tuning parameter should be
fsl,phy-pcs-tx-deemph-3p5db-attenuation-db.
Fixes: 63c85ad0cd ("phy: fsl-imx8mp-usb: add support for phy tuning")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240801124642.1152838-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In various configurations/architectures, bitfield.h may not be
transitively included, which results in a compiler error because
FIELD_PREP is an unexpanded macro:
drivers/phy/freescale/phy-fsl-imx8qm-hsio.c:459:8: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
459 | val = FIELD_PREP(HSIO_MODE_MASK, val);
| ^
1 error generated.
Include bitfield.h explicitly to fix the build.
Fixes: 82c56b6dd2 ("phy: freescale: imx8qm-hsio: Add i.MX8QM HSIO PHY driver support")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406170340.7mk3WU3Q-lkp@intel.com/
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240620-phy-fsl-imx8qm-hsio-add-bitfield-include-v1-1-5c7c09ed87e6@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add i.MX8QM HSIO PHY driver support.
i.MX8QM HSIO has three lane PHY instances, and can be bound to the
following controllers in the different use cases listed in below table.
- two lanes capable PCIEA controller.
- one lane PCIEB controller.
- AHCI SATA controller.
i.MX8QM HSIO PHYs support the following use cases.
+----------------------------------------------------+
| | Lane0| Lane1| Lane2|
|-------------------------------|------|------|------|
| use case 1: PCIEAX2SATA | PCIEA| PCIEA| SATA |
|-------------------------------|------|------|------|
| use case 2: PCIEAX2PCIEB | PCIEA| PCIEA| PCIEB|
|-------------------------------|------|------|------|
| use case 3: PCIEAPCIEBSATA | PCIEA| PCIEB| SATA |
+----------------------------------------------------+
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1716962565-2084-3-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240409161505.66619-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Leaving AUX_PLL_REFCLK_SEL at its reset default of AUX_IN (PLL clock)
proves to be more stable on the i.MX 8M Mini.
Fixes: 1aa97b0022 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20240322130646.1016630-2-marcel@ziswiler.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This adds the driver for the Samsung HDMI PHY found on the
i.MX8MP SoC. Based on downstream implementation from
Sandor Yu <Sandor.yu@nxp.com>. According to the TRM, the PHY
receives parallel data from the link and serializes it. It
also sets the PLL clock needed for the TX serializer.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Co-developed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Link: https://lore.kernel.org/r/20240227220444.77566-3-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Link: https://lore.kernel.org/r/20240217093937.58234-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The protocol converter configuration registers PCC8, PCCC, PCCD
(implemented by the driver), as well as others, control protocol
converters from multiple lanes (each represented as a different
struct phy). So, if there are simultaneous calls to phy_set_mode_ext()
to lanes sharing the same PCC register (either for the "old" or for the
"new" protocol), corruption of the values programmed to hardware is
possible, because lynx_28g_rmw() has no locking.
Add a spinlock in the struct lynx_28g_priv shared by all lanes, and take
the global spinlock from the phy_ops :: set_mode() implementation. There
are no other callers which modify PCC registers.
Fixes: 8f73b37cf3 ("phy: add support for the Layerscape SerDes 28G")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
lynx_28g_cdr_lock_check() runs once per second in a workqueue to reset
the lane receiver if the CDR has not locked onto bit transitions in the
RX stream. But the PHY consumer may do stuff with the PHY simultaneously,
and that isn't okay. Block concurrent generic PHY calls by holding the
PHY mutex from this workqueue.
Fixes: 8f73b37cf3 ("phy: add support for the Layerscape SerDes 28G")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The blamed commit added the CDR check work item but didn't cancel it on
the remove path. Fix this by adding a remove function which takes care
of it.
Fixes: 8f73b37cf3 ("phy: add support for the Layerscape SerDes 28G")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds an error message if getting vbus failed for some reason,
-EPROBE_DEFER is handled appropriately as well and adds a nice
information to debugfs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230816080256.611380-1-alexander.stein@ew.tq-group.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/phy/phy-can-transceiver.c
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230714174841.4061919-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add USB PHY parameter tuning for USB certifications.
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
[j.zink: ported to v6.3-rc1 from NXP downstream repo + cleanups]
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230516-lustige-usb-phy-dinge-v2-2-3383a0de34ac@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert platform_get_resource(),devm_ioremap_resource() to a single
call to devm_platform_ioremap_resource(), as this is exactly what this
function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230428052758.38636-1-yang.lee@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230307115900.2293120-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There should be one error return when fail to fetch the perst reset.
Add the missing error return.
Fixes: dce9edff16 ("phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/1671433941-2037-1-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
To make it more flexible and easy to expand. Refine i.MX8MM PCIe PHY
driver.
- Use gpr compatible string to avoid the codes duplications when add
another platform PCIe PHY support.
- Re-arrange the codes to let it more flexible and easy to expand.
No functional change. Re-arrange the TX tuning, since internal registers
can be wrote through APB interface before assertion of CMN_RST.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/1665625622-20551-4-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
No function changes, refine PHY register definitions.
- Keep align with other CMN PHY registers, refine the definitions of
PHY_CMN_REG75.
- Remove two BIT definitions that are not used at all.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/1665625622-20551-3-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Refer to phy_core driver, phy_init() must be called before phy_power_on().
Fix the wrong order of phy_init() and phy_power_on() here.
Link: https://lore.kernel.org/r/1662344583-18874-1-git-send-email-hongxing.zhu@nxp.com
Fixes: 1aa97b0022 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
The 'fsl,refclk-pad-mode' DT property used to select clock source for
PCIe PHY can have either of three values, IMX8_PCIE_REFCLK_PAD_INPUT,
IMX8_PCIE_REFCLK_PAD_OUTPUT, IMX8_PCIE_REFCLK_PAD_UNUSED. The first
two options are handled correctly by the driver, the last one is not,
this patch implements support for the last option.
The IMX8_PCIE_REFCLK_PAD_INPUT means PCIE_RESREF is PHY clock input,
the IMX8_PCIE_REFCLK_PAD_OUTPUT means PHY clock are sourced from SoC
internal PLL and output to PCIE_RESREF external IO pin. The last
IMX8_PCIE_REFCLK_PAD_UNUSED is a combination of previous two, PHY
clock are sourced from SoC internal PLL and not output anywhere.
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
To: linux-phy@lists.infradead.org
Link: https://lore.kernel.org/r/20220413140710.10074-1-marex@denx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
i.MX8qxp SoC embeds a Mixel MIPI DPHY + LVDS PHY combo which supports
either a MIPI DSI display or a LVDS display. The PHY mode is controlled
by SCU firmware and the driver would call a SCU firmware function to
configure the PHY mode. The single LVDS PHY has 4 data lanes to support
a LVDS display. Also, with a master LVDS PHY and a slave LVDS PHY, they
may work together to support a LVDS display with 8 data lanes(usually, dual
LVDS link display). Note that this patch supports the LVDS PHY mode only
for the i.MX8qxp Mixel combo PHY, i.e., the MIPI DPHY mode is yet to be
supported, so for now error would be returned from ->set_mode() if MIPI
DPHY mode is passed over to it for the combo PHY.
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20220419010852.452169-6-victor.liu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Freescale Layerscape Lynx 28G SerDes PHYs are only present on
Freescale/NXP Layerscape SoCs.
Move PHY_FSL_LYNX_28G outside the block for ARCH_MXC, as the latter
is meant for i.MX8 SoCs, which is a different family than Layerscape.
Add a dependency on ARCH_LAYERSCAPE, to prevent asking the user about
this driver when configuring a kernel without Layerscape SoC support.
Fixes: 02e2af20f4 ("Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc")
Fixes: 8f73b37cf3 ("phy: add support for the Layerscape SerDes 28G")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
Fix following includecheck warning:
./drivers/phy/freescale/phy-fsl-lynx-28g.c: linux/workqueue.h is
included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220315235603.59481-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new generic PHY driver to support the Lynx 28G SerDes
block found on some of the Layerscape SoCs such as LX2160A.
At the moment, only the following Ethernet protocols are supported:
SGMII/1000Base-X and 10GBaseR.
SerDes lanes which are not running an Ethernet protocol or a currently
supported Ethenet protocol will be left as it was configured through the
RCW (Reset Configuration Word) at boot time.
At probe time, the platform driver will read the current
configuration of both PLLs found on a SerDes block and will determine
what protocols are supported using that PLL.
For example, if a PLL is configured to generate a clock net (frate) of
5GHz the only protocols sustained by that PLL are SGMII/1000Base-X
(using a quarter of the full clock rate) and QSGMII using the full clock
net frequency on the lane.
On the .set_mode() callback, the PHY driver will first check if the
requested operating mode (protocol) is even supported by the current PLL
configuration and will error out if not.
Then, the lane is reconfigured to run on the requested protocol.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Freescale/NXP i.MX8 USB3, MIPI DSI, and PCIE PHYs are only present
on the NXP i.MX8 family of SoCs. Hence wrap the config symbols for
these PHYs inside a check for ARCH_MXC && ARM64, to prevent asking the
user about these drivers when configuring a kernel without NXP i.MX SoC
family support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Link: https://lore.kernel.org/r/393868affd830016d35f0d9aba32ccd7098c8073.1641987369.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
kernel test robot complains about missing FIELD_PREP, so include
bitfield.h for that
drivers/phy/freescale/phy-fsl-imx8m-pcie.c:41:37: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration]
drivers/phy/freescale/phy-fsl-imx8m-pcie.c:41:41: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 1aa97b0022 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20211215060834.921617-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The only usage of imx8mp_usb_phy_ops is to assign its address to the
data field in the of_device_id struct, which is a const void pointer.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200926205844.34218-1-rikard.falkeborn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The only usage is to pass its address to devm_phy_create() which takes a
const pointer. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200823220025.17588-3-rikard.falkeborn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add initial support for imx8mp usb phy support, imx8mp usb has
a silimar phy as imx8mq, which has some different customizations
on clock and low power design when SoC integration.
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1598276014-2377-2-git-send-email-jun.li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
*) Add a new PHY driver for Qualcomm PCIe2 PHY
*) Add a new PHY driver for Mixel DPHY present in i.MX8
*) Fix Qualcomm QMP UFS PHY driver from incorrectly reporting that
PHY enable failed
*) Fix _BUG_ on Amlogic G12A USB3 + PCIE Combo PHY Driver due to
calling a sleeping function from invalid context
*) Fix WARN_ON dump on rcar-gen3-usb2 PHY driver caused due to
imbalance powered flag
*) Fix .cocci and sparse warnings
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----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=5mPE
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
phy: for 5.3
*) Add a new PHY driver for Qualcomm PCIe2 PHY
*) Add a new PHY driver for Mixel DPHY present in i.MX8
*) Fix Qualcomm QMP UFS PHY driver from incorrectly reporting that
PHY enable failed
*) Fix _BUG_ on Amlogic G12A USB3 + PCIE Combo PHY Driver due to
calling a sleeping function from invalid context
*) Fix WARN_ON dump on rcar-gen3-usb2 PHY driver caused due to
imbalance powered flag
*) Fix .cocci and sparse warnings
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy:
phy: qcom-qmp: Raise qcom_qmp_phy_enable() polling delay
phy: meson-g12a-usb3-pcie: disable locking for cr_regmap
phy: Add driver for mixel mipi dphy found on NXP's i.MX8 SoCs
dt-bindings: phy: Add documentation for mixel dphy
dt-bindings: phy-pxa-usb: add bindings
phy: renesas: rcar-gen3-usb2: fix imbalance powered flag
phy: qcom-qmp: Drop useless msm8998_pciephy_cfg setting
phy: qcom-qmp: Correct READY_STATUS poll break condition
phy: ti: am654-serdes: Make serdes_am654_xlate() static
phy: usb: phy-brcm-usb: Fix platform_no_drv_owner.cocci warnings
phy: samsung: Use struct_size() in devm_kzalloc()
phy: qcom: Add Qualcomm PCIe2 PHY driver
dt-bindings: phy: Add binding for Qualcomm PCIe2 PHY
This adds support for the Mixel DPHY as found on i.MX8 CPUs but since
this is an IP core it will likely be found on others in the future. So
instead of adding this to the nwl host driver make it a generic PHY
driver.
The driver supports the i.MX8MQ. Support for i.MX8QM and i.MX8QXP can be
added once the necessary system controller bits are in via
mixel_dphy_devdata.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Co-developed-by: Robert Chiras <robert.chiras@nxp.com>
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds support to the PHY driver to power up/down the VBUS
voltage rail at the appropriate times.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Since this is going to be used on more SoCs than just i.MX8MQ,
make the dependency here more generic.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This is a cleaned up port of the downstream i.MX8MQ USB3 PHY driver.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
