Add initial thermal support by wiring up a per-radio (pdev) hwmon temperature
sensor backed by the existing WMI pdev temperature command and event.
When userspace reads the sysfs file temp1_input, the driver sends
WMI_PDEV_GET_TEMPERATURE_CMDID (tag WMI_TAG_PDEV_GET_TEMPERATURE_CMD) and waits
for the corresponding WMI_PDEV_TEMPERATURE_EVENTID
(tag WMI_TAG_PDEV_TEMPERATURE_EVENT) to get the temperature and pdev_id.
Export the reported value in millidegrees Celsius as required by hwmon.
The temperature reported is per-radio (pdev). In a multi-radio wiphy under a
single phy, a separate hwmon device is created for each radio.
Sample command and output:
$ cat /sys/devices/pci0000:00/.../ieee80211/phyX/hwmonY/temp1_input
$ 50000
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Co-developed-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260223132622.43464-1-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Move files built as part of ath12k.ko from wifi7 directory to ath12k_wifi7.ko.
Export necessary symbols from ath12k.ko and remove redundant exports from
the wifi7 directory, as they are no longer needed.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Karthikeyan Periyasamy <karthikeyan.periyasamy@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251103112111.2260639-11-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Refactor the structures and APIs defined in files peer.h and peer.c in such a
way that the APIs making use of ath12k_peer are moved to newly introduced files
dp_peer.h and dp_peer.c.
Have this new file dp_peer.c compiled as part of kernel module ath12k.ko.
Move these APIs from peer.h and peer.c to dp_peer.h and dp_peer.c:
ath12k_peer_find()
ath12k_peer_find_by_pdev_idx()
ath12k_peer_find_by_addr()
ath12k_peer_find_by_ml_id()
ath12k_peer_find_by_id()
ath12k_peer_exist_by_vdev_id()
ath12k_peer_find_by_ast()
ath12k_peer_unmap_event()
ath12k_peer_map_event()
ath12k_peer_get_link_sta()
Background:
In current ath12k architecture, connected station is represented by struct
ath12k_sta.
struct ath12k_sta has an array of struct ath12k_link_sta wherein each index
represents one link of the connected station.
For each ath12k_link_sta, there is a corresponding data path peer which is
represented by struct ath12k_peer.
Diagrammatic view of the station is as below:
ath12k_sta
|
|-> ath12k_link_sta <--> ath12k_peer
|
|-> ath12k_link_sta <--> ath12k_peer
|
|-> ath12k_link_sta <--> ath12k_peer
Currently, in control path, ath12k_link_sta and ath12k_peer are used
interchangeably, while the data path makes use of ath12k_peer only.
For ath12k next-generation driver framework, in order to have a clean
segregation between control and data path, use ath12k_link_sta only for control
path operations.
Station view for the data path is revamped as below:
ath12k_dp_peer
|
|-> ath12k_dp_link_peer
|
|-> ath12k_dp_link_peer
|
|-> ath12k_dp_link_peer
Introduce the structure ath12k_dp_peer to represent the data path version of
corresponding ath12k_sta.
This ath12k_dp_peer contains the fields used in the per packet Tx Rx paths
applicable across all the links and maintains an array of ath12k_dp_link_peer.
Per packet Tx and Rx path operates on ath12k_dp_peer. This ath12k_dp_peer is a
standalone new object and has back pointer reference to ieee80211_sta.
Rename ath12k_peer to ath12k_dp_link_peer and move the fields which are common
across all the links to ath12k_dp_peer.
Add the fields specific to a link which are mostly for statistics and monitor
usage to ath12k_dp_link_peer.
Final view of station in ath12k next-generation driver is shown as below:
Control Path Data Path
-------------------------------------------------------------------
ath12k_sta ath12k_dp_peer
| |
|-> ath12k_link_sta <----> |-> ath12k_dp_link_peer
| |
|-> ath12k_link_sta <----> |-> ath12k_dp_link_peer
| |
|-> ath12k_link_sta <----> |-> ath12k_dp_link_peer
This patch and the subsequent patches in this series are meant to achieve the
modularization of peer object as mentioned above.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Harsh Kumar Bijlani <quic_hbijlani@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024181548.3255166-2-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently desc_size uses a dedicated hal_ops API for initialization.
Combine it with other hal_params to be initialized in a
single API "hal_init" during probe time using a static array.
hal_init will be used as the common API to initialize
all hal parameters during the probe.
Add hal.c file to add hal definitions that are wifi7 specific
but common between qca and wcn chipsets.
Add hal.h header to add wifi7 specific prototypes/Macros etc
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-3-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Move the hal APIs from the existing common hal files to hardware specific
hal files.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250910181414.2062280-3-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
WLAN Host driver interacts with the Firmware and vice versa using
Host-To-Target (HTT) interface.
HTT interface code is spread across multiple files (ex dp_tx.c, dp_rx.c
etc) and this interface is independent of the underlying architecture Tx
and Rx. Relocate HTT specific code from dp_rx.c to newly introduced file
dp_htt.c for HTT interface. This new file is compiled as part of the
common module ath12k.ko.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Harsh Kumar Bijlani <quic_hbijlani@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250828173553.3341351-19-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Move arch specific TX data path to wifi7 directory as part of Next
Generation (NG) Driver Framework.
Architecture specific APIs:
ath12k_dp_tx_htt_tx_complete_buf
ath12k_dp_tx_process_htt_tx_complete
ath12k_dp_tx_update_txcompl
ath12k_dp_tx_complete_msdu
ath12k_dp_tx_status_parse
ath12k_dp_tx_completion_handler
The moved APIs will be a part of dp_tx.c file inside wifi7 directory.
wifi7/dp_tx.c file will continue to be part of ath12k.ko temporarily
until the corresponding infra for movement to ath12k_wifi7.ko arrives
in upcoming patches.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250828173553.3341351-16-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Move ath12k_dp_service_srng API and ath12k_dp_rx_process_reo_status
to wifi7 directory.
As srng processing is specific to architecture (wifi7 / wifi8), the
API ath12k_dp_service_srng is being moved to wifi7 directory. The
file wifi7/dp.c can be used to define wifi7-specifi functions that are
common to both tx and rx.
The API which is invoked as part of service srng,
ath12k_dp_rx_process_reo_status is also moved to wifi7 directory, as
the implementation is specific to HW due to the usage of wifi7
specific HAL macros.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250828173553.3341351-12-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Move wifi7 architecture specific Rx error functions from dp_rx.c to
wifi7 directory.
The new wifi7-specific dp_rx.c file will continue to be part of ath12k.ko
temporarily until the corresponding infra for movement to the
ath12k_wifi7.ko arrives in upcoming patches.
Move following architecture specific APIs to wifi7 directory:
ath12k_dp_rx_h_tkip_mic_err
ath12k_dp_rx_h_rxdma_err
ath12k_dp_rx_h_reo_err
ath12k_dp_rx_wbm_err
ath12k_dp_rx_process_wbm_err
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250828173553.3341351-6-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Move architecture-specific files hal_rx.c and hal_tx.c into the wifi7
directory as part of a broader effort to separate common and hardware
-specific code into distinct modules. This modularization enables reuse
of the common driver components across multiple hardware architectures.
The relocated files remain part of ath12k.ko temporarily, until the
corresponding infra for movement to the ath12k_wifi7.ko arrives in
upcoming patches.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250828173553.3341351-2-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Split the ath12k driver into two kernel modules:
- ath12k.ko for shared logic across multiple targets
- ath12k_wifi7.ko for Wi-Fi 7 specific configuration and routines
The common module (ath12k.ko) must be loaded prior to any device-specific
module, as the latter depends on exported symbols from the former.
As part of this restructuring, Wi-Fi 7 specific files are moved into a
dedicated `wifi7/` directory and built as a separate module. Common
symbols are exported accordingly, with further adjustments planned
in upcoming patches to support architecture-dependent separation.
This modularization improves maintainability and scalability by enabling
clean separation of hardware-specific logic from the shared driver core.
+-----------------+
| |
| ath12k.ko |
| (common) |
+---------------+ | |
| | +-----------------+
| ath12k.ko | ===========>
| | +------------------+
+---------------+ | |
| ath12k_wifi7.ko |
| (wifi7 family) |
| |
+------------------+
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Signed-off-by: Kiran Venkatappa <quic_kiranv@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-ath12k-mod-v1-10-8c9b0eb9335d@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Move Wi-Fi 7 specific module initialization and exit routines from core.c
to a new core_wifi7.c file. Decouple these routines from common module
entry points to improve modularity.
This restructuring is part of a broader effort to modularize the
ATH12K driver by separating common logic from hardware family-specific
implementations, improving maintainability and scalability.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Signed-off-by: Kiran Venkatappa <quic_kiranv@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-ath12k-mod-v1-8-8c9b0eb9335d@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Split ahb.c into a common module (ahb.c) and a Wi-Fi 7 specific module
(ahb_wifi7.c). Retain shared logic-such as probe and initialization
sequences-in ahb.c to support reuse across hardware families.
Move Wi-Fi 7 specific initialization and configuration routines to
ahb_wifi7.c and register them via callbacks.
This modular approach improves code organization and prepares the
driver for scalable support of additional hardware families.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Signed-off-by: Kiran Venkatappa <quic_kiranv@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-ath12k-mod-v1-7-8c9b0eb9335d@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Rename hw.c to hw_wifi7.c to reflect its focus on Wi-Fi 7 chipset
specific configurations. Clarify the files role in containing
hardware dependent logic tailored to the Wi-Fi 7 family.
This change is part of a broader effort to modularize the codebase
by separating common and target specific components into distinct
modules for improved clarity and maintainability.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kiran Venkatappa <quic_kiranv@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-ath12k-mod-v1-5-8c9b0eb9335d@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Relocate target-specific MHI configuration to a new mhi_wifi7.c file to
isolate Wi-Fi 7 related logic from the common codebase.
Improve modularity by separating hardware-dependent code from shared
components.
Enhance maintainability and prepare the driver for clean integration of
additional device families.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kiran Venkatappa <quic_kiranv@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-ath12k-mod-v1-4-8c9b0eb9335d@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Relocate Wi-Fi 7 specific WMI configuration from shared codebase to a new
target-specific file. Isolate WMI settings per target to improve
modularity and maintainability.
This change is part of a broader effort to separate hardware-dependent
logic into standalone modules, paving the way for cleaner support of
multiple hardware families
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kiran Venkatappa <quic_kiranv@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-ath12k-mod-v1-3-8c9b0eb9335d@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Relocate Copy Engine (CE) assignment logic from ce.c to a new ce_wifi7.c
file to consolidate Wi-Fi 7 specific CE configuration in one place.
Move CE service map and target configuration from hw.c to ce_wifi7.c.
This reorganization improves code clarity and modularity by isolating
device-specific logic. It is part of a broader effort to separate
common and hardware-specific code into distinct modules.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kiran Venkatappa <quic_kiranv@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-ath12k-mod-v1-2-8c9b0eb9335d@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Refactor pci.c to split common and hardware family specific components.
Retain shared logic such as probe and initialization sequences in common
pci.c to support reuse across device families and move Wi-Fi 7 specific
initialization and configuration to a new pci_wifi7.c file. Register
device specific routines via callbacks to keep the common PCI code
generic and extensible for future hardware families.
This improves maintainability and prepare the codebase for additional
device family support.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kiran Venkatappa <quic_kiranv@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-ath12k-mod-v1-1-8c9b0eb9335d@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently only PCI devices are supported in Ath12k driver. Refactor
Ath12k module_init and module_exit to include Ath12k AHB support.
Add Ath12k AHB support in Kconfig with dependency on Remoteproc
driver. Ath12k AHB support relies on remoteproc driver for firmware
download, power up/down etc.
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1
Signed-off-by: Balamurugan S <quic_bselvara@quicinc.com>
Co-developed-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250321-ath12k-ahb-v12-13-bb389ed76ae5@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add support to process factory test mode commands(FTM) for calibration.
By default firmware start with MISSION mode and to process the FTM commands
firmware needs to be restarted in FTM mode using module parameter ftm_mode.
The pre-request is all the radios should be down before starting the test.
All ath12k test mode interface related commands specified in enum
ath_tm_cmd.
When start command ATH_TM_CMD_TESTMODE_START is received, ar state
is set to test Mode and FTM daemon sends test mode command to wifi
driver via cfg80211. Wifi driver sends these command to firmware as
wmi events. If it is segmented commands it will be broken down into
multiple segments and encoded with TLV header else it is sent to
firmware as it is.
Firmware response via UTF events, wifi driver creates skb and send
to cfg80211, cfg80211 sends firmware response to FTM daemon via
netlink message.
Command to boot in ftm mode
insmod ath12k ftm_mode=1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20250119083657.1937557-4-quic_aarasahu@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In case of firmware assert snapshot of firmware memory is essential for
debugging. Add firmware coredump collection support for PCI bus.
Collect RDDM and firmware paging dumps from MHI and pack them in TLV
format and also pack various memory shared during QMI phase in separate
TLVs. Add necessary header and share the dumps to user space using dev
coredump framework. Coredump collection is disabled by default and can
be enabled using menuconfig. Dump collected for a radio is 55 MB
approximately.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.2.1-00201-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240717085604.4131642-1-quic_ssreeela@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Implement WoW enable and WoW wakeup commands which are needed
for suspend/resume.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240604055407.12506-3-quic_bqiang@quicinc.com
Currently, ath12k does not support Time-Average-SAR (TAS). In order to enable
TAS read the tables from ACPI and send them to the firmware using
WMI_PDEV_SET_BIOS_INTERFACE_CMDID command. Besides, ath12k registers an ACPI
event callback so that ACPI can notify ath12k to get the updated SAR power
table and sends it to the firmware when the device state is changed.
ACPI is only enabled for WCN7850 using struct ath12k_hw_params::acpi_guid
field. Most likely QCN9274 will never support ACPI as the chip is not used in
laptops.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240422033054.979-2-quic_lingbok@quicinc.com
The initial debugfs infra bringup in ath12k driver and create the ath12k debugfs
and soc-specific directories in /sys/kernel/debug/
For each ath12k device, directory will be created in <bus>-<devname>
schema under ath12k root directory.
Example with one ath12k device:
/sys/kernel/debug/ath12k/pci-0000:06:00.0
ath12k
`-- pci-0000:06:00.0
|-- mac0
To enable ath12k debugfs support (CONFIG_ATH12K_DEBUGFS=y)
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240320171305.655288-2-quic_rgnanase@quicinc.com
The Notice of Absence (NoA) attribute is used by the P2P Group Owner to
signal its absence due to power save timing, concurrent operation, or
off-channel scanning. It is also used in the P2P Presence Request-Response
mechanism.
The NoA attribute shall be present in the P2P IE in the beacon frames
transmitted by a P2P Group Owner when a NoA schedule is being advertised,
or when the CTWindow is non-zero.
So add support to update P2P information after P2P GO is up through
event WMI_P2P_NOA_EVENTID, and always put it in probe resp.
Create p2p.c and p2p.h for P2P related functions and definitions.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-6-quic_kangyang@quicinc.com
Firmware IE containers can dynamically provide various information
what firmware supports. Also it can embed more than one image so
updating firmware is easy, user just needs to update one file in
/lib/firmware/.
The firmware API 2 or higher will use the IE container format, the
current API 1 will not use the new format but it still is supported
for some time. Firmware API 2 files are named as firmware-2.bin
(which contains both amss.bin and m3.bin images) and API 1 files are
amss.bin and m3.bin.
Currently ath12k PCI driver provides firmware binary (amss.bin) path to
MHI driver, MHI driver reads firmware from filesystem and boots it. Add
provision to read firmware files from ath12k driver and provide the amss.bin
firmware data and size to MHI using a pointer.
Currently enum ath12k_fw_features is empty, the patches adding features will
add the flags.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240123122812.3811251-1-quic_rajkbhag@quicinc.com
ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first
supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP
and station; WCN7850 supports only station mode. Monitor mode is not
(yet) supported. Only PCI bus devices are supported.
ath12k is forked from an earlier version of ath11k. It was simpler to
have a "clean start" for the new generation and not try to share the
code with ath11k. This makes maintenance easier and avoids major
changes in ath11k, which would have significantly increased the risk
of regressions in existing setups.
ath12k uses le32 and cpu_to_le32() macros to handle endian
conversions, instead of using the firmware byte swap feature utilized
by ath11k. There is only one kernel module, named ath12k.ko.
Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but
work is ongoing to add EHT mode (IEEE 802.11be) support.
The size of the driver is ~41 kLOC and 45 files. To make the review
easier, this initial version of ath12k does not support Device Tree,
debugfs or any other extra features. Those will be added later, after
ath12k is accepted to upstream.
The driver is build tested by Intel's kernel test robot with both GCC
and Clang. Sparse reports no warnings. The driver is mostly free of
checkpatch warnings, albeit few of the warnings are omitted on
purpose, list of them here:
https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52
The driver has had multiple authors who are listed in alphabetical
order below.
Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com>
Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com>
Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com>
Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com>
Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Co-developed-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Co-developed-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Co-developed-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
