The flow meter action is bound to the first ASO object of the bulk but
the rule offset only indexes the meter within its own object. A rule
past the first object runs on the wrong meter.
Fixes: 82d3639ef7 ("net/mlx5: fs, add support for flow meters HWS action")
Signed-off-by: Alexandre Cassen <acassen@corp.free.fr>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20261007143830.1733583-3-acassen@corp.free.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
L2 to L3 tunnel reformats are now released to the el2tol3tnl pools.
Fixes: aecd9d1020 ("net/mlx5: fs, add HWS packet reformat API function")
Signed-off-by: Alexandre Cassen <acassen@corp.free.fr>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20261007143830.1733583-2-acassen@corp.free.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mlxsw_sp_flower_tmplt_create() parses a flow_cls_offload template
into a stack-local struct mlxsw_sp_acl_rule_info purely to compute
rulei.values.elusage. Parsing can acquire port range registers via
mlxsw_sp_flower_parse_ports_range(), but since this rulei never goes
through mlxsw_sp_acl_rulei_destroy(), those registers were never
released, including through chain template deletion.
Factor out of mlxsw_sp_acl_rulei_destroy() the code to actually
release the necessary resources and call from
mlxsw_sp_flower_tmplt_create() to plug the leak.
The issue was found during a review of Wentao Liang's patch referenced
below.
Fixes: fe22f74105 ("mlxsw: spectrum_flower: Add ability to match on port ranges")
Reported-by: Wentao Liang <vulab@iscas.ac.cn>
Closes: https://lore.kernel.org/netdev/20260917113236.2149095-1-vulab@iscas.ac.cn/
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/95339cf970ce78e1a74aa86ffcc104ecf7c7762c.1791294384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_poll_ico_cq() requires sq->cc to be updated only after
mlx5_cqwq_update_db_record(), otherwise a CQ overrun may occur.
The current implementation updates sq->cc before the CQ doorbell
record, violating this ordering requirement.
Update the CQ doorbell record first and use dma_wmb() before updating
sq->cc. This ensures that the CQ space is released to the device
before the corresponding ICOSQ consumer index is updated by software.
Fixes: fd9b4be800 ("net/mlx5e: RX, Support multiple outstanding UMR posts")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20261006105820.257208-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit ad0ae7aefa ("net/mlx5: E-Switch, preserve max tx
speed on vport state modification").
mlx5_modify_vport_admin_state() and mlx5_esw_adj_vport_modify() query
the vport's current max_tx_speed before modifying its state, and
write that value back, to avoid resetting it to 0 as a side effect
of an unrelated admin-state change.
That's unnecessary: max_tx_speed is optional in MODIFY_VPORT_STATE -
FW skips writing it whenever it's 0, treating that as "not provided"
rather than "reset to zero". Leaving it unset already preserves FW's
current value, with no query needed.
Fixes: ad0ae7aefa ("net/mlx5: E-Switch, preserve max tx speed on vport state modification")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20261004083531.216988-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_lag_sum_devices_speed computes the LAG aggregate by summing oper
speeds across all ports. This has two bugs.
First, it relies on the assumption that a port whose carrier is down
will report an oper speed of zero and therefore not contribute to the
sum. This assumption does not always hold: when the link partner
disconnects the port transitions to DOWN state but firmware may still
report a non-zero oper speed, causing the aggregate to include a port
that is not actively carrying traffic.
Second, in active-backup mode only one port transmits at a time, so
the aggregate should reflect a single port speed rather than the sum
of all ports.
Fix this by splitting mlx5_lag_sum_devices_speed into two helpers.
mlx5_lag_get_devices_oper_speed reflects the speed currently available:
it queries the vport state of each port and skips any port that is not
UP, rather than relying on oper speed being zero.
mlx5_lag_get_devices_max_speed is state-independent and returns the
maximum achievable speed used as a fallback when speed is 0; for
active-backup it takes the maximum single-port speed instead of the sum.
The bugs were discovered during integration and reproduced on a
back-to-back ConnectX-8 setup.
The first bug (stale oper speed when link goes down) was observed: after
the link partner disconnected, the aggregate TX speed reported to vports
remained full speed because firmware still returned the last oper speed,
causing vports to be rate-limited to the old aggregate speed.
The second bug (active-backup summing all port speeds instead of the
active port's speed) was also triggered: in active-backup mode the
computed aggregate was double the expected value since both port speeds
were summed even though only one port was active.
Fixes: 28ea6036da ("net/mlx5: Handle port and vport speed change events in MPESW")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260930170406.148548-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During XSK TX queue teardown, outstanding descriptors are completed
without a CQE. If one requested a TX timestamp, the completion path
passes that NULL CQE to mlx5e_xsk_fill_timestamp(), which dereferences
it.
Return zero when no CQE is available, indicating that teardown did not
produce a TX timestamp.
Fixes: ec706a860e ("net/mlx5e: Implement AF_XDP TX timestamp and checksum offload")
Signed-off-by: Prathamesh Deshpande <prathameshdeshpande7@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260926165402.5902-1-prathameshdeshpande7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mlx5_handle_changeupper_event() and mlx5_handle_changeinfodata_event()
functions check for LAG masters (which includes both bonding and team
devices) but only call bonding-specific APIs. When processing team device
events, calling bond_slave_get_rcu() and bond_is_slave_inactive() on
team_port structures causes KASAN to detect an out-of-bounds memory access
since team_port is smaller than bond slave.
Fix this by wrapping the bond-specific API calls with a check for bonding
devices. This allows the function to still process LAG events for both
bonding and teams but only calls bond-specific functions when dealing with
actual bonding devices.
For mlx5_handle_changeinfodata_event(), keep the explicit bond check as
mlx5 doesn't handle state information for team ports anyway.
Tested with Mellanox ConnectX-5 on Linux 7.2.0-rc6:
- Bonding: PASS (no regressions)
- Team device: PASS (no KASAN errors)
Fixes: 54493a08e2 ("net/mlx5: Lag, record inactive state of bond device")
Suggested-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Anirudh Virdi <avirdi@redhat.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20260924064244.94045-1-avirdi@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the reverse entry is found but its counter is already being
released, refcount_inc_not_zero() fails and the reference taken by
mlx5_tc_ct_entry_get() is never dropped before falling through to
create_counter. Drop it so the reverse entry is not kept alive forever
by a shared counter lookup that did not use it.
Fixes: 1edae2335a ("net/mlx5e: CT: Use the same counter for both directions")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260917113131.2149024-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_esw_bridge_vport_unlink() returns -EINVAL when the port isn't
tracked by this instance's br_offloads. This is reachable on a sibling
instance that registered its notifier after the port was already
enslaved: it never saw the NETDEV_CHANGEUPPER link event, so
peer_link() never created a peer port for it, but it does see the
later unlink event and fails. Return 0 instead, and give
mlx5_esw_bridge_vport_peer_unlink() the same merged_eswitch capability
guard peer_link() already has, since without it peer_link() likewise
never creates a port to unlink.
This also matters beyond the -EINVAL itself:
mlx5_esw_bridge_switchdev_port_event() runs on the per-netns
netdev_chain, and notifier_from_errno(-EINVAL) sets NOTIFY_STOP_MASK,
which call_netdevice_notifiers_info() checks to stop calling further
listeners on that chain - so the old -EINVAL silently dropped the
event for any listener registered later on the same chain, even
though none of it was visible to user space since
__netdev_upper_dev_unlink() discards the return value.
Fixes: c358ea1741 ("net/mlx5: Bridge, allow merged eswitch connectivity")
Signed-off-by: Bernardo Soares <bsoares.it@gmail.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20260918095931.29792-3-bsoares.it@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5 registers the bridge offload switchdev notifiers once per eswitch
instance, but the notifier chains are global, so every instance sees
every event and must filter out the ones that aren't its own. The
existing filter, mlx5_esw_bridge_dev_same_hw(), only checks that the
event netdevice sits on the same HCA - intentional for merged eswitch,
where one bridge can span representors of several eswitches on one
HCA - but same-HCA doesn't mean the instance actually has that port:
peer ports are only created reactively from NETDEV_CHANGEUPPER, so an
instance brought up after a sibling PF's port was already enslaved has
none. The port object and attribute handlers claim the event anyway
once same-HW passes, then fail the port lookup and return -EINVAL,
which gets reported to user space even though the owning instance
already handled it (e.g. "bridge vlan add ... RTNETLINK answers:
Invalid argument"). Fix by filtering on the tracked port instead.
The same gap exists in the generic recursive lower-device walk used by
attribute changes on a bridge with more than one representor enslaved
directly: mlx5_esw_bridge_lower_rep_vport_num_vhca_id_get() is entered
with the bridge master netdevice, falls through to its generic
netdev_for_each_lower_dev() loop, and returns as soon as the recursion
into any one lower device yields a non-NULL rep - the underlying base
case, mlx5_esw_bridge_rep_vport_num_vhca_id_get(), only checks
mlx5_esw_bridge_dev_same_hw(), not ownership by the calling instance's
br_offloads. mlx5_esw_bridge_lag_rep_get(), used for the LAG-master
case, already filters on mlx5_esw_bridge_dev_same_esw() per candidate
and so cannot select a sibling's rep; it is not the source of this bug.
On a merged-eswitch HCA with a bridge spanning representors of more
than one eswitch instance directly, the walk can return a sibling's rep
instead of continuing to the one the calling instance actually owns, so
the attribute change fails the same way as above. Fix by checking
mlx5_esw_bridge_port_exists() at the point each rep is picked, same as
the previous fix did for the notifier filter.
Fixes: c358ea1741 ("net/mlx5: Bridge, allow merged eswitch connectivity")
Signed-off-by: Bernardo Soares <bsoares.it@gmail.com>
Cc: Vlad Buslov <vladbu@nvidia.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20260918095931.29792-2-bsoares.it@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 XFRM policies may use different source and destination prefix
lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks
independently, but setup_fte_addr6() installs each mask in the opposite
address field.
When the prefix lengths differ, this makes the source match use the
destination prefix and the destination match use the source prefix. The
resulting hardware rule can both miss traffic covered by the policy and
match traffic outside it.
Install each mask in its corresponding match field.
Fixes: ca7992f52c ("net/mlx5e: Properly match IPsec subnet addresses")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260917115542.177675-1-parri.andrea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 339ccec8d4 ("net/mlx5: Enable MACsec offload feature for VLAN
interface") added NETIF_F_HW_MACSEC unconditionally to vlan_features so
that VLAN devices could inherit MACsec offload support.
mlx5e_build_nic_netdev subsequently copies vlan_features into
hw_features and features. As a result, all mlx5e NIC netdevices
advertise MACsec hardware offload, even when the firmware does not
support it and the driver does not install macsec_ops.
Set the MACsec feature bits in mlx5e_macsec_build_netdev, after device
capabilities have been validated. This preserves MACsec-over-VLAN
support and the ethtool feature control on capable devices, without
advertising either on unsupported hardware.
Fixes: 339ccec8d4 ("net/mlx5: Enable MACsec offload feature for VLAN interface")
Cc: stable@vger.kernel.org
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Link: https://patch.msgid.link/20260917122724.654639-1-ralf@mandelbit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a shared-FDB LAG the master device creates the bond IB device; the
other LAG members do not create their own, they populate a port inside
the master's IB device. mlx5_lag_reload_ib_reps_unlocked() reloaded the
members' IB reps in iteration order, with no guarantee the master is
reloaded first. When a non-master member is reloaded before the master,
it tries to populate its port in an IB device that has not been
recreated yet.
Hence, reload the master's IB reps first, then every other member.
Fixes: 2b204cdb12 ("net/mlx5: LAG, use xa_alloc to manage LAG device indices")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260915113459.3934760-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_lag_shared_fdb_create() sets sd_fdb_active on every group member
before reloading the representors, so mlx5_lag_is_active() is already
true and the guard in mlx5_esw_offloads_rep_load() does not skip the
VF/SF reps. If the reload then fails, the error path clears
sd_fdb_active and destroys the shared FDB, leaving the reps loaded
while SD LAG is inactive - the state cited commit was written
to prevent.
Unload the reps in the error path as well.
Fixes: 68c2dd59a6 ("net/mlx5: E-Switch, Tie rep load/unload to SD LAG state")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260915113459.3934760-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_devcom_comp_get_size() returns the component's kref count. That
kref is bumped in mlx5_devcom_register_component() under comp_list_lock,
before the comp_dev is linked onto comp_dev_list_head under comp->sem.
The event broadcast (mlx5_devcom_locked_send_event()) walks that list.
Hence, a caller can read the expected size, but send_event won't be sent
to all peers. In the SD group registration path, this lets a member
broadcast its role-election event over an incomplete list, electing a
primary that never completes the group, is never marked ready, and
leaves the group with a stale primary.
Track the number of linked comp_devs in a dedicated counter, maintained
under comp->sem together with the list add/remove, and return it from
mlx5_devcom_comp_get_size().
Fixes: 9bb1ac8073 ("net/mlx5: devcom, Add component size getter")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260915113459.3934760-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Including fixes from Netfilter, Bluetooth and WPAN.
Current release - new code bugs:
- Bluetooth: hci_sync: fix not setting CE length properly
- eth: enic: match mailbox replies to request numbers
Previous releases - regressions:
- tunnels: drop stale dst when building an ICMP error for PMTUD
- ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings()
(bug in the rtnl_lock -> RCU conversion)
- eth: bnxt_en: fix crashes on Thor2 due to OOB coalescing buffer accesses
- eth: bnxt_en: prevent queue stop with deferred completions
Previous releases - always broken:
- eth: ice: don't dereference pointers from TP_printk()
- eth: fix OOB writes on ethtool flow rule dump in 3 drivers
- eth: mlx5: fix FEC configuration with RS_544_514_INTERLEAVED_QUAD
- dsa: tag_brcm: legacy FCS: request needed tailroom
Misc:
- net: cap tx_queue_len at S16_MAX to prevent oversized ring alloc
- ipv6: flowlabel: cap duplicate leases per socket
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=f9J9
-----END PGP SIGNATURE-----
Merge tag 'net-7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Nothing too exciting, usual stream of fixes. Including fixes from
Netfilter, Bluetooth and WPAN.
Current release - new code bugs:
- Bluetooth: hci_sync: fix not setting CE length properly
- eth: enic: match mailbox replies to request numbers
Previous releases - regressions:
- tunnels: drop stale dst when building an ICMP error for PMTUD
- ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings()
(bug in the rtnl_lock -> RCU conversion)
- eth: bnxt_en:
- fix crashes on Thor2 due to OOB coalescing buffer accesses
- prevent queue stop with deferred completions
Previous releases - always broken:
- eth:
- ice: don't dereference pointers from TP_printk()
- fix OOB writes on ethtool flow rule dump in 3 drivers
- mlx5: fix FEC configuration with RS_544_514_INTERLEAVED_QUAD
- dsa: tag_brcm: legacy FCS: request needed tailroom
Misc:
- net: cap tx_queue_len at S16_MAX to prevent oversized ring alloc
- ipv6: flowlabel: cap duplicate leases per socket"
* tag 'net-7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (164 commits)
selftests: tc-testing: test action batch failure cleanup
net/sched: act_api: release all action references on NEWACTION failure
openvswitch: fix wrong flag value in get_ipv6_ext_hdrs()
ipmr: account multicast table and route memory
net: phy: dp83td510: handle the active-high LED polarity mode
net: macb: initialize PTP state before registering clock
net: hsr: enable promiscuous mode on interlink port with fwd offload
ipv6: fix fib6 walker UAF on seq stop
net: stmmac: fix TX descriptor availability check for TSO traffic
net/rds: fix tcp stream corruption with large pages
net: mana: restore the XDP program pointer when pre-allocation fails
net: phy: dp83867: handle the active-high LED polarity mode
octeontx2-af: fix PF/CGX debugfs PCI bus lookup
net: net_failover: Fix the deadlock in net_failover_slave_name_change()
net: phy: mediatek-ge: disable EEE on the MT7530 PHY
tcp: reject non zerocopy devmem tx
net: ethernet: mtk_eth_soc: populate lpi_interfaces to fix EEE support
net: dsa: mt7530: populate lpi_interfaces to fix EEE support
net: hinic: fix mailbox segment buffer overflow
net: sun4i-emac: fix missing of_node_put() for phy_node
...
The representor vnic devlink health reporter is created and destroyed
along the representor netdev (un)load path, which is not serialized by
the devlink instance lock. Destroying the reporter from there triggers
a devl_assert_locked() splat on driver unbind:
WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758
Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ...
CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), ...
RIP: 0010:devl_assert_locked+0x54/0x70
Call Trace:
<TASK>
devl_health_reporter_destroy+0x3a/0x1b0
mlx5e_vport_rep_unload+0x12d/0x2b0 [mlx5_core]
mlx5_eswitch_unregister_vport_reps+0x1b8/0x220 [mlx5_core]
? __esw_offloads_unload_rep+0x190/0x190 [mlx5_core]
? kernfs_remove_by_name_ns+0xc3/0xf0
device_release_driver_internal+0x3b2/0x560
unbind_store+0xce/0xf0
Move the reporter's lifecycle to the eswitch devlink port (un)register
paths, which are already serialized by the devlink instance lock, and
store the handle on mlx5_devlink_port. Use the port's mlx5_vport as the
reporter priv since the diagnose callback only needs a device handle and
a vport number, and mlx5_vport carries both and is initialized before
any representor driver probes.
Fixes: cf14af140a ("net/mlx5e: Add vnic devlink health reporter to representors")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260906090700.3761260-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`mlx5e_stats_ts_get()` currently selects either DMA or port timestamp
counters based on `tx_ptp_opened`. This flag is intentionally kept set
once the PTP TX queues have been opened so their statistics remain
available after queue teardown. As a result, DMA timestamps are no
longer reported after switching from port timestamping back to DMA
timestamping.
The function also reads statistics only from the currently active
channels and TCs. Reducing the number of channels or TCs can therefore
drop previously accumulated timestamp counters from the reported value.
Read the persistent channel statistics instead and always include DMA
timestamp counters. Once the PTP TX queues have been opened, also
include the port timestamp counters.
This also drops state_lock. It previously protected live channel/PTP
pointers, the new code only reads persistent channel_stats and
ptp_stats via mlx5e_stats_nch_read(), which is already safe for
lockless stats access.
Fixes: 3579032c08 ("net/mlx5e: Implement ethtool hardware timestamping statistics")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260902193731.3668958-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mlx5_esw_vport_disable(), move esw_apply_vport_rx_mode() ahead
of esw_vport_change_handle_locked() so vport->allmulti_rule is
NULL before the change handler observes it.
During FW-fatal recovery the disable runs while dev->state ==
INTERNAL_ERROR. The promisc query inside esw_update_vport_rx_mode()
fails and returns early, leaving vport->allmulti_rule intact, so
esw_update_vport_mc_promisc() runs and adds MLX5_ACTION_ADD entries
to vport->mc_list whose flow rules are then installed in the FDB
by esw_add_mc_addr(). esw_destroy_legacy_table() tears down the
FDB with those refs still held, corrupting the sub-tree and
leaving dangling flow_rule pointers in vport->mc_list.
Two-stage failure on `echo 1 > /sys/bus/pci/devices/<bdf>/reset`:
refcount_t: underflow; use-after-free.
tree_put_node+0xef/0x110 [mlx5_core]
clean_tree+0x44/0xd0 [mlx5_core] (x5)
mlx5_fs_core_cleanup+0x57/0x1c0 [mlx5_core]
mlx5_unload+0x65/0xd0 [mlx5_core]
... mlx5_health_try_recover
BUG: unable to handle page fault for address: 0000000003000055
down_write+0x1c/0x60
mlx5_del_flow_rules+0x33/0x1f0 [mlx5_core]
esw_del_mc_addr+0x7b/0x170 [mlx5_core]
esw_apply_vport_addr_list+0x56/0xf0 [mlx5_core]
esw_vport_change_handle_locked+0x28b/0x310 [mlx5_core]
mlx5_esw_vport_enable+0x270/0x4a0 [mlx5_core]
... mlx5_load ... mlx5_health_try_recover
esw_apply_vport_rx_mode(false, false) clears vport->allmulti_rule
via its local state machine even when the FW del fails. With the
rule NULL the !IS_ERR_OR_NULL(allmulti_rule) gate in the change
handler closes, no rules are installed during disable, and the
reload starts with a clean mc_list.
Fixes: 922f56e9a7 ("net/mlx5: Fix steering rules cleanup")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260902193854.3669035-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mlx5_eswitch_termtbl_put(), the zero-ref cleanup check reads
tt->ref_count after termtbl_mutex has been released. Two concurrent
callers on the same mlx5_termtbl_handle race: one decrements ref_count
to zero, removes the hash entry, and calls kfree(tt) while the other
has already dropped the mutex and is about to evaluate
if (!tt->ref_count), producing a use-after-free.
Fix this by capturing the result of the decrement into a stack-local
last variable before dropping the mutex. The cleanup decision is now
made entirely under termtbl_mutex, and tt is not touched after
kfree.
Fixes: 10caabdaad ("net/mlx5e: Use termination table for VLAN push actions")
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260902193514.3668880-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Concurrent teardown of TC sample rules sharing the same restore
context may re-read restore->count after dropping restore_lock.
At that point another thread may already have completed cleanup and
freed the restore object.
Use the result of the refcount decrement while holding restore_lock to
determine whether cleanup is needed.
Fixes: 36a3196256 ("net/mlx5e: TC, Add sampler restore handle API")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260902193341.3668809-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ETS TCs with zero bandwidth are configured, the driver programs the
firmware using an alternate representation. On get, it needs
to recognize that representation so those TCs can be translated back and
reported as 0% bandwidth.
The existing detection relied on the programmed bandwidth because it was
enough to identify this representation. However, when a single ETS TC
owns 100% of the bandwidth, its firmware representation becomes the
same as a strict-priority TC, causing zero-bandwidth ETS TCs to be
reported with non-zero bandwidth values.
Use the cached TSA instead to distinguish the ETS and strict-priority
cases.
Fixes: be0f161ef1 ("net/mlx5e: DCBNL, Implement tc with ets type and zero bandwidth")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260902193224.3668743-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CREATE_LAG command is handled asynchronously by queuing a work,
which stores a local copy of ldev->tracker. When the work is processed,
it is possible that the values of the local copy and ldev->tracker have
diverged.
A single CREATE_LAG command programs two related fields into the
firmware: the v2p (virtual-to-physical) map, which selects the physical
egress port for each hash bucket, and the active_port bitmask, which
tells the firmware which physical ports are currently up so it can
redirect QP/TIS away from inactive ports. For the firmware to steer
traffic correctly, both must be derived from the same view of the ports'
link state.
The v2p map is computed by mlx5_infer_tx_affinity_mapping() from the
local tracker snapshot, but lag_active_port_bits() called
mlx5_infer_tx_enabled() on the live ldev->tracker instead. If
ldev->tracker changed between the snapshot and command execution, the
two fields reflect different port states: the v2p map may steer a bucket
to a port that the active_port mask marks as inactive (or vice versa).
The firmware then receives a self-contradictory configuration and can
redirect or drop traffic on a port the mapping still points at, until a
later event happens to reconcile the state.
Update lag_active_port_bits so that it receives the local version of the
tracker from when the work was queued, effectively closing the window
for injecting an inconsistency.
Fixes: c5c13b456c ("net/mlx5: Lag, set active ports if support bypass port select flow table")
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260902192740.3665435-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
get_fec_supported_advertised() populates the FEC modes reported as
supported to userspace. The MLX5E_ADVERTISE_SUPPORTED_FEC macro only
checked MLX5E_FEC_RS_528_514, causing devices that support only the
other RS variants (RS_544_514_INTERLEAVED_QUAD or RS_544_514) to not
advertise RS as supported to ethtool at all.
Introduce MLX5E_FEC_RS_MASK covering all three RS bit positions,
update the macro to accept a bitmask directly rather than a single
enum value, and pass MLX5E_FEC_RS_MASK for the RS entry.
Fixes: b5ede32d33 ("net/mlx5e: Add support for FEC modes based on 50G per lane links")
Fixes: 4e343c11ef ("net/mlx5e: Support FEC settings for 200G per lane link modes")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260902164634.3657606-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a user sets a FEC mode via ethtool, the driver maps the ethtool
FEC type to the lowest mlx5 bit of that type. For RS FEC, this is
MLX5E_FEC_RS_528_514 (bit 2). The driver then checks whether this
bit is supported by at least one link mode by inspecting the
fec_override_cap fields via mlx5e_fec_in_caps(), and returns
-EOPNOTSUPP if not.
This check is incorrect. RS FEC has three supported hardware variants:
RS_528_514 (bit 2), RS_544_514_INTERLEAVED_QUAD (bit 4), and
RS_544_514 (bit 7). mlx5e_remap_fec_conf_mode() already remaps bit 2
to the appropriate RS variant per link mode when writing the admin
fields, but the early capability check is done against the raw
unmapped bit. As a result, a device that supports RS_544_514 or
RS_544_514_INTERLEAVED_QUAD but not RS_528_514 will incorrectly reject
the user's RS FEC request.
Remove the early support check from mlx5e_set_fec_mode() and fold
it into the existing write loop, checking caps against the remapped
policy per link mode. Return -EOPNOTSUPP before the final register
write if no link mode accepted the policy.
Fixes: 2608a2f831 ("net/mlx5e: Fix return status when setting unsupported FEC mode")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260902164634.3657606-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MLX5E_FEC_RS_544_514_INTERLEAVED_QUAD is missing from
pplm_fec_2_ethtool_linkmodes[], leaving index 4 zero-initialized.
As a result, when this FEC mode is active, find_first_bit() returns
index 4, causing __set_bit() to set bit 0
(ETHTOOL_LINK_MODE_10baseT_Half_BIT) instead of
ETHTOOL_LINK_MODE_FEC_RS_BIT. Consequently, ethtool reports:
Advertised FEC modes: Not reported
Add the missing mapping to ETHTOOL_LINK_MODE_FEC_RS_BIT.
Fixes: 4e343c11ef ("net/mlx5e: Support FEC settings for 200G per lane link modes")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260902164634.3657606-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP
garbage-collection workqueue, rather than the NAPI poll context. For any
unmatched PTP entries carrying an SKB, it calls
mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For
ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end
of that function is the following:
skb->protocol = eth_type_trans(skb, skb->dev);
napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb);
The napi pointer is one that was placed in the SKB control block when the
trapped packet was received in the NAPI context. Later, when the GC reaps
the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to
napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe
if the poll is running concurrently on another CPU.
In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent
softirq processing, but this only applies to the local CPU. Additionally,
its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish()
invokes netif_receive_skb(). This has not been accurate since the
referenced commit; this patch makes that comment accurate again.
mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX
net_device without any conditions. The NAPI instance's poll, which may be
running concurrent to the GC, is running as an independently-scheduled
kthread which may be on a different CPU. The call to local_bh_disable()
does not guard against this.
If a tx-timestamp timeout produces an unmatched entry (which can be easily
reproduced by running ptp4l and waiting for a port to reach the
UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of
a poll on another CPU, both sides mutate the GRO list concurrently, as
shown below:
[39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE
list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy)
Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018
RIP: 0010:__list_add_valid_or_report+0x79/0xb0
RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540
RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003
R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0
Call Trace:
<TASK>
gro_receive_skb+0xee/0x230
mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum]
mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core]
mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci]
__napi_poll+0x31/0x1e0
napi_threaded_poll_loop+0x16b/0x1c0
napi_threaded_poll+0x71/0xa0
kthread+0xfb/0x260
ret_from_fork+0x22d/0x260
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
The machinery that leads to this kernel panic has not been changed between
6.18.48 and mainline.
This patch adds an ingress-delivery helper for the PTP packet_finish()
path that calls netif_receive_skb() instead of napi_gro_receive().
netif_receive_skb(), unlike napi_gro_receive(), can be called from outside
of the NAPI instance's poll context, which can occur at the call site for
this path. RX stats accounting and the skb->dev assignment are still
preserved; the only change is the delivery call itself.
This removes GRO batching for any PTP event traffic received by the mlxsw
trap, but given the relatively low volume of traffic characteristic of the
protocol, and impact limited to only Spectrum-1 ASICs, this is an
acceptable solution.
Fixes: 1ba06ca96c ("mlxsw: Switch to napi_gro_receive()")
Signed-off-by: Taylor Bates <tmbates12@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260902024949.2273997-1-tmbates12@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With AF_XDP on a striding RQ, mlx5e defers releasing XSK buffers until
an MPWQE is refilled. If XSK allocation then returns -ENOMEM,
actual_wq_head is not advanced and a later NAPI poll retries the same
WQE.
mlx5e_free_rx_mpwqe() leaves each released slot marked as releasable. On
retry it can therefore call xsk_buff_free() again through stale pointers
after the frames have returned to the XSK pool and been reallocated.
Set all skip_release_bitmap bits in the common error path of
mlx5e_xsk_alloc_rx_mpwqe(). This matches mlx5e_alloc_rx_mpwqe(). A
successful allocation already clears the bitmap after replacing every
buffer, so retries become idempotent without changing the success path.
Fault injection forced three consecutive failures for one selected MPWQE.
Both an early allocation failure and a partial 8-of-16-buffer unwind
released the original 16 XSK buffers only once. Each error left a full
bitmap, the following NAPI retry skipped the release, and a later
successful allocation cleared it. A 20-second AF_XDP zero-copy pressure
run exercised 1,575,262 buffer allocation failures without invalid
descriptors, WQE errors, or kernel warnings.
Fixes: 4c2a132368 ("net/mlx5e: RX, Defer page release in striding rq for better recycling")
Cc: stable@vger.kernel.org
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20260824141645.23700-3-jtollet@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an XDP redirect to an AF_XDP socket fails because its RX ring is
full, the XSK core frees the buffer. During the subsequent batched refill
of a legacy cyclic RQ, mlx5e also releases the WQE's XSK buffer before
allocating a replacement. If that refill succeeds only partially, a WQE
left without a replacement retains its old buffer pointer.
The buffer can meanwhile be allocated to another WQE. A later refill
retry can then free the live buffer through the stale pointer and publish
the same UMEM frame twice.
Mark the WQE as released immediately after the driver-side free. The flag
is already cleared when a replacement buffer is assigned, so refill
retries no longer release stale pointers.
The failure is silent and produces no kernel warning or splat. A
standalone legacy cyclic-RQ zero-copy libxsk reproducer, using 64-byte UDP
traffic offered at 12 Mpps, detected it: stock stopped after 2,854,914
packets in 4.094 seconds, with 4,542 xdp_rx_ring_full events and 64
ownership/double-publication errors. With this change it processed
356,904,225 packets in 30 seconds despite 571,405 xdp_rx_ring_full events,
with no ownership or data errors.
Fixes: 3f93f82988 ("net/mlx5e: RX, Defer page release in legacy rq for better recycling")
Cc: stable@vger.kernel.org
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Link: https://patch.msgid.link/20260824141645.23700-2-jtollet@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - fix to a fix:
- netfilter: ipset: remove need to allocate memory on delete operations
Current release - regressions:
- macb: drop CONFIG_OF #if block, fix build
Previous releases - always broken:
- stream of fixes for SCTP continues
- inet: frags: strip GSO state from fragments before reassembly
- virtio-net: ensure that TCP packets don't overflow gso_segs
- tcp-ao: fix use-after-free of current_key on reconnect to another peer
- page_pool: remove zone/policy GFP flags when allocating XArray entries
- Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN
- tls: device: fix out-of-bounds write in tls_append_frag()
- eth: bnxt:
- ring the doorbell when SW USO exits early, avoid packets stuck in Tx
- gate TPH enablement behind BNXT_SUPPORTS_QUEUE_API check, avoid users
of older NICs seeing non-actionable warning messages
- eth: qede: fix NULL pointer dereference in TPA fragment processing
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=1DXR
-----END PGP SIGNATURE-----
Merge tag 'net-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, IPSec and Netfilter.
Current release - fix to a fix:
- netfilter: ipset: remove need to allocate memory on delete operations
Current release - regressions:
- macb: drop CONFIG_OF #if block, fix build
Previous releases - always broken:
- stream of fixes for SCTP continues
- inet: frags: strip GSO state from fragments before reassembly
- virtio-net: ensure that TCP packets don't overflow gso_segs
- tcp-ao: fix use-after-free of current_key on reconnect to another
peer
- page_pool: remove zone/policy GFP flags when allocating XArray
entries
- Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN
- tls: device: fix out-of-bounds write in tls_append_frag()
- eth: bnxt:
- ring the doorbell when SW USO exits early, avoid packets stuck
in Tx
- gate TPH enablement behind BNXT_SUPPORTS_QUEUE_API check, avoid
users of older NICs seeing non-actionable warning messages
- eth: qede: fix NULL pointer dereference in TPA fragment processing"
* tag 'net-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (216 commits)
inet: frags: strip GSO state from fragments before reassembly
net/sched: sch_htb: limit htb_classify inner-class filter hops
selftests/net: packetdrill: add tcp_urg_ptr_retransmit
tcp: fix corruption of urgent data on multi-segment retransmit
usb: atm: usbatm: fix invalid ci_range initialization
net: fec: only stop PTP if it was initialized
slip: remove slip_hangup() to fix use-after-free in slip_receive_buf()
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup
net: dsa: mxl862xx: enable assisted learning on CPU port
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
net: stmmac: drop gso_enabled_types and rely on netdev features
net: stmmac: selftests: Don't test flow control for small rx fifos
net: stmmac: selftests: Account for the UC filter list for filtering tests
net: stmmac: dwxgmac: Account for the primary MAC address for UC filtering
net: stmmac: dwmac4: Account for the primary MAC address for UC filtering
net: stmmac: dwmac1000: Account for the primary MAC address for UC filtering
net: stmmac: selftests: Check multiple MMC counters
selftests: net: Fix slow configurations in big_tcp_tunnels.sh
selftests: net: Lower threshold with csum offload off in big_tcp_tunnels.sh
...
The zero-copy path reads TX metadata whenever the UMEM has metadata space,
even if the descriptor does not set XDP_TX_METADATA. Pass descriptor
options through the metadata helpers and ignore metadata unless the option
is set.
This does not fix the existing per-WQE metadata handling for mlx5 MPWQEs.
Only the descriptor that starts a session passes through
xsk_tx_metadata_request() and configures offload state shared by the batch.
Metadata on descriptors joining an open session is therefore not validated
and does not configure its requested offloads. In addition, a non-NULL
metadata pointer from such a descriptor is treated as a timestamp
completion request even when XDP_TXMD_FLAGS_TIMESTAMP is not set, so its
metadata union can be overwritten with an unrequested timestamp. Fixing
mixed metadata states within one MPWQE requires a separate change.
Fixes: 48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260819160535.1472459-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=cNUI
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Resource management:
- Add hotplug reservation only once (not at each level of the
hierarchy) so bridge windows don't grow more than necessary (Ilpo
Järvinen)
Driver binding:
- Rework device matching so device ID lifetime only needs to cover
the probe path since dynamic IDs can be removed at any time (Gary
Guo)
Error handling:
- Update mappings of AER errors to agent & layer and log them for
each individual error when multiple errors detected (Lukas Wunner)
- Log Error Source only once, not twice in separate messages (Lukas
Wunner)
- Emit TLP Log only for unmasked errors (Lukas Wunner)
- Support Advisory Non-Fatal Errors (Lukas Wunner)
- Allow DPC on all Downstream Ports, not just Root Ports, when OS
controls AER (Darshit Shah)
ASPM:
- Program the same ASPM Control values for every function of
multi-function devices, as recommended by the PCIe spec (Krishna
Chaitanya Chundru)
- Avoid L0s for Realtek RTS525A, where it causes an AER interrupt
storm (Max Lee)
- Avoid ASPM L0s, L1, and L1 PM Substates based on 'aspm-no-l0s',
'aspm-no-l1' [1], and 'aspm-no-l1ss' DT properties (Krishna
Chaitanya Chundru)
Power management:
- Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
(we avoid D3 for these ports on x86 because some old platforms
didn't validate it) (Manivannan Sadhasivam)
- Allow portdrv to claim Ports even if they don't support services
(AER, PME, DPC, hotplug, etc) so it can do power management (Brian
Norris)
Power control:
- Add support for PCIe WAKE# interrupt when described via DT (Krishna
Chaitanya Chundru)
- For the TC9563 PCIe switch:
- Take a reference on the I2C adapter to avoid uninterruptible
hang when unloading an I2C module while in-use (Johan Hovold)
- Update DT binding and driver to restrict Tx Amplitude, DFE and
N_FTS to USP, DSP1 and DSP2 (Manivannan Sadhasivam)
- Power off only external-facing ports (DSP1, DSP2), leaving USP
and DSP3 (aka VDSP) powered up (Manivannan Sadhasivam)
- Move integrated MAC Endpoint out of the list of internal ports
and configure it separately (Manivannan Sadhasivam)
Virtualization:
- Add ACS quirk for Pericom PI7C9X2G608 switches (Tim Harvey)
- Fix a long-standing bug in the Intel PCH Root Port MPC ACS quirk
that didn't update the intended INTEL_MPC_REG_IRBNCE bit because it
used a 16-bit config write when a 32-bit write was intended
(Mohamad Raizudeen)
Procfs:
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)
- Warn on user-space writes to kernel-exclusive config space regions,
as we already do for sysfs (Krzysztof Wilczyński)
- Check credentials of opener, not reader, for config space reads, as
we already do for sysfs (Krzysztof Wilczyński)
Sysfs:
- In pci_write_legacy_io(), avoid out-of-bounds reads from the user
buffer and fix incorrect ioport write data (1-byte writes on
little-endian powerpc, 2- and 4-byte writes on big-endian powerpc)
(Krzysztof Wilczyński)
- In pci_read_legacy_io(), fix incorrect ioport read data for 2- and
4-byte reads on big-endian powerpc (Krzysztof Wilczyński)
- Fix I/O port accessor argument order in Alpha pci_legacy_write()
(Krzysztof Wilczyński)
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)
- Return -EINVAL, not -ENODEV, for mmap of I/O BAR that fails because
the arch doesn't support it, as we do for procfs (Krzysztof
Wilczyński)
- Check for LOCKDOWN_PCI_ACCESS for legacy_io and legacy_mem, as we
do for other config space accessors (Krzysztof Wilczyński)
Peer-to-peer DMA:
- Add Nvidia Vera Rubin to list of platforms that support P2PDMA
(Leon Romanovsky)
Endpoint framework:
- Check doorbell SUCCESS bit in pci_endpoint_test to avoid treating
some failures as successes (Niklas Cassel)
- Fail doorbell test when the trigger IRQ is missed (Niklas Cassel)
New native PCIe controller drivers:
- Add DT binding and driver for NVIDIA Tegra264 (Thierry Reding)
Native PCIe controllers:
- Use common wait time definitions for PCIe link monitoring instead
of defining driver-private duplicates (Thierry Reding)
Generic host bridge driver:
- Fix NULL pointer dereference that caused enumeration failures on
32-bit CAM systems (Steffen Persvold)
Amlogic Meson PCIe controller driver:
- Correct the PERST# GPIO state so it remains asserted until power
and REFCLK become stable to fix enumeration failure (Ronald
Claveau)
ASPEED PCIe controller driver:
- Switch to irq_domain_create_linear() so we can obsolete
irq_domain_add_linear() (Jiri Slaby)
Cadence PCIe controller driver:
- Add MODULE_DEVICE_TABLE to generate module aliases for OF-based
module autoloading (Pengpeng Hou)
- Add debugfs 'ltssm_status' file for LGA- and HPA-based Cadence
controllers (Hans Zhang)
- Support up to x4 (not x2) lanes for J200 (Takuma Fujiwara)
- Fix host/endpoint dependencies for cadence-plat driver to fix link
error when cadence-plat is built-in but the host or endpoint driver
is modular (Aksh Garg)
Freescale i.MX6 PCIe controller driver:
- Add imx6 intr/aer/pme interrupt lines for i.MX95 (Richard Zhu)
- Remove PERST# checking from pci_host_common_parse_port() so callers
can decide whether to fall back to legacy DT binding with PERST# in
the host bridge (Sherry Sun)
- Fix build issues when PCI_PWRCTRL_GENERIC or PCI_HOST_COMMON is a
module (Arnd Bergmann)
- Create pwrctrl devices only once by doing it from imx_pcie_probe()
instead of imx_pcie_host_init(), which is used during both probe
and resume (Sherry Sun)
- Use 'dw_pcie_rp->skip_pwrctrl_off' to avoid powering off devices
during suspend to preserve wakeup capability (Sherry Sun)
- Add runtime PM support for i.MX95 to allow dynamic power management
when the link is idle (Richard Zhu)
Intel VMD host bridge driver:
- Support device ID 0x28C1 and assume that BIOS has already
enumerated the hierarchy below VMD and stored bus range info for OS
to use (Nirmal Patel)
- Add support for VMCONFIG BUS_RESTRICT_CFG=3, which makes it
possible to enumerate downstream devices on Intel Arrow Lake-HX
systems and probably others (Ali Alaei)
- Pay attention to _OSC negotiation for VMD hierarchy only when
running on bare metal, not when running in a VM (Nirmal Patel)
- Add Nova Lake (NVL) and Dunlow (DNL) Device IDs (Szymon Durawa)
MediaTek PCIe controller driver:
- Add support for PCIe controller in EcoNet EN7528 and EN751221 SoCs
(Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Add mediatek-gen3 'memory-region' for restricted DMA buffer
(Chen-Yu Tsai)
NVIDIA Tegra264 PCIe controller driver:
- Distinguish Tegra264 C0 PCIe controller for internal GPU from C1-C5
controllers so the unit address matches the first 'reg' entry
(Thierry Reding)
- Add Tegra264 Root Port stanzas to prepare for generic WAKE#
handling (Thierry Reding)
Qualcomm PCIe controller driver:
- Add IPQ9650 compatible with global interrupt (Kathiravan
Thirumoorthy)
- Add IPQ5210 compatible with IPQ9574 fallback (Varadarajan
Narayanan)
- Add DT binding and driver support for Hawi SoC (Matthew Leung)
- Skip PERST# GPIOs provided by downstream PCIe devices, which should
be handled by drivers of those devices (Manivannan Sadhasivam)
- Stop advertising Attention Button Present (no Qcom SoCs support
Attention Buttons) so pciehp can use Presence Detect Changed events
(Qiang Yu)
Renesas R-Car PCIe controller driver:
- Add rcar-gen4-pci-host optional 'msi-parent' for GIT ITS (Marek
Vasut)
- When MSI is enabled but iMSI-RX is not used, configure AXIINTC to
allow GIT ITS to handle MSI (Marek Vasut)
- Refactor GIC600 implementation to make it easier to add platforms
that only support 32-bit addressing (Marek Vasut)
- Add Renesas R-Car Gen4 S4/V4H/V4M to the list of GIC600
integrations that only support 32-bit addressing (Marek Vasut)
Renesas RZ/G3S PCIe controller driver:
- Add DT binding and driver support for RZ/V2H(P) SoC, which contains
two PCIe controllers, configured either as a single x4 link or two
independent x2 link controllers (Lad Prabhakar)
SpacemiT K1 PCIe controller driver:
- Add missing MODULE_DEVICE_TABLE() to generate module alias info for
OF-based module autoloading (Pengpeng Hou)
StarFive PCIe controller driver:
- Fix resource leaks on error paths in host_init() (Ali Tariq)
- Fix runtime PM handling and teardown ordering to avoid register
access while power or clocks are disabled (Ali Tariq)
- Check for runtime PM resume failure to avoid register access while
power or clocks are disabled (Ali Tariq)
Synopsys DesignWare PCIe controller driver:
- Add LECARC PMU IDs to the DWC RAS/DES VSEC list so it can take
advantage of the existing debugfs support for silicon debug, error
injection, and event counters (Brett Zhou)
- Factor pcie_valid_speed() and pci_bus_speed2lnkctl2() out of bwctrl
so they can be shared by the DWC core (Hans Zhang)
- Flush MSI writes from endpoint before unmapping the iATU, as we
already do for MSI-X writes (Niklas Cassel)
- Unmap MSI iATU window before mapping MSI-X window, to avoid a
subsequent MSI write using a disabled aperture and losing the
interrupt (Niklas Cassel)
- Change endpoint .pre_init() and .init() callbacks to return errors
and handle them (Marek Vasut)
UltraRISC PCIe controller driver:
- Add 'core', 'dbi', and 'aux' clocks to DT binding and manage them
in the driver (Jia Wang)
- Use module_platform_driver() since this may be built as a module,
though not removable because IRQs can't be safely disposed (Jia
Wang)
MicroSemi Switchtec management driver:
- Add Microchip PCI1008 device ID and include it in NTB DMA alias
quirk (Logan Gunthorpe)
Miscellaneous:
- Document how to write PCI Host Controller drivers (Manivannan
Sadhasivam)
- Fix typos in documentation (D'Orus Tsitera)
- Use %pe format specifier to print error pointers so we get symbolic
errname when available (Krzysztof Wilczyński)"
* tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (124 commits)
PCI: vmd: Add Nova Lake (NVL) and Dunlow (DNL) Device IDs
PCI: tegra264: Add Tegra264 support
dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings
dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5
PCI/AER: Support Advisory Non-Fatal Errors
PCI: Fix 32-bit config write in Intel PCH Root Port MPC ACS quirk
PCI: dwc: Handle return value from endpoint .pre_init callback
PCI: dwc: Handle return value from endpoint .init callback
PCI: dwc: Add PCI ID for LECARC PCIe PMU
PCI/ASPM: Mask ASPM states based on Devicetree properties
PCI/ASPM: Disable/restore ASPM on every function for multi-function devices
Documentation: PCI: Document how to write PCI Host Controller drivers
PCI/ASPM: Use pcie_capability_clear_and_set_word() for ASPM disable/restore
PCI: Add support for PCIe WAKE# interrupt
PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
dt-bindings: PCI: Correct white-space style
PCI/ASPM: Avoid L0s for Realtek RTS525A
PCI: ultrarisc: Use module_platform_driver()
PCI: ultrarisc: Get and enable DP1000 PCIe controller clocks
dt-bindings: PCI: ultrarisc: Add required DP1000 PCIe clocks
...
When modifying vport state, the firmware interprets a zero in the max tx
speed field as an intentional reset, which can overwrite previously set
values. This patch attempts to fix this by querying the current max tx
speed from firmware before modifying the vport state and passing it back
in the modification command. If the query fails, fall back to the cached
agg_max_tx_speed value to avoid inadvertently resetting the speed.
Fixes: 50f1d188c5 ("net/mlx5: Propagate LAG effective max_tx_speed to vports")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816065015.3280733-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_query_vport_max_tx_speed() was introduced to serve the
query_port_speed path, which uses max_tx_speed == 0 when port is down.
This is incorrect for callers that need the actual configured speed
regardless of vport state, such as modify-vport-state helpers
that must preserve the speed across state transitions.
Move this logic to the caller function in the verb flow and let
mlx5_query_vport_max_tx_speed() return the raw firmware value
unconditionally.
Fixes: aaecff5e13 ("RDMA/mlx5: Implement query_port_speed callback")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816065015.3280733-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Protect vport admin state modifications and vport iteration with the
eswitch state_lock mutex to ensure proper serialization of concurrent
vport state changes.
Currently, calls to mlx5_modify_vport_admin_state() and loops iterating
over eswitch vports can race with each other, potentially leading to
inconsistent vport state. Fix this by acquiring esw->state_lock
Fixes: 7d0314b11c ("net/mlx5e: Modify uplink state on interface up/down")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816065015.3280733-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When hardware GRO (SHAMPO) coalesces a small IPv4/TCP segment that was
padded up to the 60-byte minimum Ethernet frame, the trailing padding is
folded into the merged payload causing padding to be delivered
to the user as payload.
Detecting and reproducing the issue: the selftest
tools/testing/selftests/drivers/net/gro.py subtest
hw_ipv4_data_lrg_1byte sends {100, 1} expecting to receive {101}.
In current code, it receives {106} (100 + 1 payload + 5 pad) instead.
This patch avoids giving the user padding as payload by simply not
coalescing small packets (which fails the subtest; the same approach
and behavior as sw gro). This gains code simplicity at the cost of
more computation (passing an extra skb up the stack) for small packets
that could be coalesced.
The threshold is chosen as ETH_ZLEN + 2 * VLAN_HLEN. This is the largest
frame that may still contain minimum-frame padding (+ 2 VLAN tags), so
anything larger is safe to consider for coalesce. (We do not include
ETH_FCS_LEN in that threshold computation as netdev_fix_features()
drops NETIF_F_GRO_HW whenever NETIF_F_RXFCS is set, so retained FCS
can't reach this path.)
Fixes: 92552d3abd ("net/mlx5e: HW_GRO cqe handler implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Glenn Judd <gmj@meta.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260816064259.3279548-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When initializing send queues, set the number of queues only
when allocations are over.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260816142045.3289452-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When mlx5_cmd_exec fails for STC modify, include the command syndrome
from the output buffer in the error message to aid debugging.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260816142045.3289452-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When polling for completion returned completion with error,
parse some more details: WQE count and syndrome number.
Also, extract all the long value-to-string if conditions
to a short value-to-string functions: do it for rule
resize state, rule status, and syndrome.
v2: removed duplicated QPN print
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260816142045.3289452-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several fast-path and control-path lockless readers access dev->num_tc
(e.g., skb_tx_hash(), netdev_txq_to_tc(), netdev_get_num_tc(), and
qdisc/driver lookups) while concurrent writers update dev->num_tc
during TC setup, device reset, or channel configuration.
Add READ_ONCE() and WRITE_ONCE() annotations to prevent compiler
reordering and load/store tearing when accessing dev->num_tc.
Update inline helpers in netdevice.h (netdev_get_num_tc(),
netdev_set_prio_tc_map(), and netdev_get_sb_channel()) as well as
writers and lockless readers in core networking code and drivers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260812085440.3917924-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_set_tc_queue() (and related helpers/drivers such as
netdev_bind_sb_channel_queue(), netdev_reset_tc(), and
netdev_unbind_sb_channel()) perform separate 16-bit writes to
dev->tc_to_txq[tc].count and dev->tc_to_txq[tc].offset.
Furthermore, memset() in netdev_reset_tc() and
netdev_unbind_sb_channel() provides no guarantee of performing
full 32-bit word stores.
Concurrent lockless readers (e.g. skb_tx_hash(), netdev_txq_to_tc(),
ixgbe_select_queue(), taprio, mqprio, FPE drivers) can observe torn
values where offset and count belong to inconsistent configurations.
Redefine struct netdev_tc_txq to embed count and offset inside a union
with a u32 combined field, allowing atomic manipulation via
READ_ONCE() and WRITE_ONCE().
Update all lockless readers and writers across the kernel to use
READ_ONCE() and WRITE_ONCE() on the combined field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260812085440.3917924-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Newer FW reports the SD group size directly in the NIC vport context
via the sd_group_size field, gated by the sd_group_size capability.
Switch sd_init() to source the group size from there and fall back to
the MPIR-based host_buses query only when the cap is absent.
sd_group_size might return 1 in some FW configuration. Add explicit
check to disable SD creation in this case.
While here, rename host_buses to group_size throughout sd.c to follow
the new name on capable FW.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260810093037.3138197-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All callers of these create functions treat NULL and ERR_PTR as
equivalent error cases. Align the return convention to NULL-on-failure
to simplify the checks at usage sites.
Since its return value is never checked and failure is non-fatal, change
hv_vhca init function to return void.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260811061637.3195320-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement max_sfs generic parameter to allow users to control the total
light-weight NIC subfunctions that can be created using devlink instead
of external vendor tools. A value of 0 will effectively disable creation
of new subfunction devices. A warning is sent to user-space via extack
(returning extack without error code is interpreted as a warning by
user-space tools). The maximum value is capped at U16_MAX.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260806073037.3001886-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
